EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 32016D0362
Commission Implementing Decision (EU) 2016/362 of 11 March 2016 on the approval of the MAHLE Behr GmbH & Co. KG enthalpy storage tank as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (Text with EEA relevance)
Commission Implementing Decision (EU) 2016/362 of 11 March 2016 on the approval of the MAHLE Behr GmbH & Co. KG enthalpy storage tank as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (Text with EEA relevance)
Commission Implementing Decision (EU) 2016/362 of 11 March 2016 on the approval of the MAHLE Behr GmbH & Co. KG enthalpy storage tank as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (Text with EEA relevance)
C/2016/1418
OJ L 67, 12.3.2016, p. 59–68
(BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
No longer in force, Date of end of validity: 31/12/2020; Repealed by 32020D1806
|
12.3.2016 |
EN |
Official Journal of the European Union |
L 67/59 |
COMMISSION IMPLEMENTING DECISION (EU) 2016/362
of 11 March 2016
on the approval of the MAHLE Behr GmbH & Co. KG enthalpy storage tank as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 443/2009 of the European Parliament and of the Council of 23 April 2009 setting emissions performance standards for new passenger cars as part of the Community's integrated approach to reduce CO2 emissions from light-duty vehicles (1), and in particular Article 12(4) thereof,
Whereas:
|
(1) |
The supplier MAHLE Behr GmbH & Co. KG (the ‘Applicant’) submitted an application for the approval of an enthalpy storage tank as an innovative technology on 29 April 2015. The completeness of that application was assessed in accordance with Article 4 of Commission Implementing Regulation (EU) No 725/2011 (2). The Commission identified certain relevant information as missing in the original application and requested the Applicant to complete it. The Applicant provided the required information on 27 May 2015. The application was found to be complete and the period for the Commission's assessment of the application started on the day following the date of official receipt of the complete information, i.e. 28 May 2015. |
|
(2) |
The application has been assessed in accordance with Article 12 of Regulation (EC) No 443/2009, Implementing Regulation (EU) No 725/2011 and the Technical Guidelines for the preparation of applications for the approval of innovative technologies pursuant to Regulation (EC) No 443/2009 (the Technical Guidelines, version February 2013) (3). |
|
(3) |
The application refers to an enthalpy storage tank that reduces the CO2 emissions and fuel consumption after a cold start of an internal combustion engine due to a faster engine warm-up. |
|
(4) |
The Commission finds that the information provided in the application demonstrates that the conditions and criteria referred to in Article 12 of Regulation (EC) No 443/2009 and in Articles 2 and 4 of Implementing Regulation (EU) No 725/2011 have been met. |
|
(5) |
The Applicant has demonstrated that enthalpy storage tanks were not fitted in 3 % or more of the new passenger cars registered in the reference year 2009 in accordance with Article 2(2)(a) of Implementing Regulation (EU) No 725/2011. |
|
(6) |
The Applicant has used a comprehensive testing procedure in accordance with the Technical Guidelines, and defined the baseline vehicle as the vehicle fitted with a deactivated enthalpy storage tank. |
|
(7) |
The Applicant has provided a methodology for testing the CO2 reductions. The Commission considers that the testing methodology will provide testing results that are verifiable, repeatable and comparable and that it is capable of demonstrating in a realistic manner the CO2 emissions benefits of the innovative technology with strong statistical significance in accordance with Article 6 of Implementing Regulation (EU) No 725/2011. |
|
(8) |
Against that background the Applicant has demonstrated satisfactorily that the emission reduction achieved by the enthalpy storage tank is at least 1 g CO2/km. |
|
(9) |
Since the enthalpy storage tank is not activated during the CO2 emissions type approval test referred to in Regulation (EC) No 715/2007 of the European Parliament and of the Council (4) and Commission Regulation (EC) No 692/2008 (5), the Commission is satisfied that the technology in question is not covered by the standard test cycle. |
|
(10) |
The activation of the enthalpy storage tank is not dependant on the choice of the driver. On that basis the Commission finds that the manufacturer should be considered accountable for the CO2 emission reduction due to the use of the innovative technology. |
|
(11) |
The Commission finds that the verification report has been prepared by TÜV SÜD Auto Service GmbH which is an independent and certified body and that the report supports the findings set out in the application. |
|
(12) |
Against that background, the Commission finds that no objections should be raised as regards the approval of the innovative technology in question. |
|
(13) |
For the purposes of determining the general eco-innovation code to be used in the relevant type approval documents in accordance with Annexes I, VIII and IX to Directive 2007/46/EC of the European Parliament and of the Council (6), the individual code to be used for the innovative technology approved through this Decision should be specified, |
HAS ADOPTED THIS DECISION:
Article 1
1. The enthalpy storage tank described in the application of MAHLE Behr GmbH & Co. KG is approved as an innovative technology within the meaning of Article 12 of Regulation (EC) No 443/2009.
2. The CO2 emissions reduction from the use of the enthalpy storage tank shall be determined using the methodology set out in the Annex.
3. The individual eco-innovation code to be entered into type approval documentation to be used for the innovative technology approved through this Implementing Decision shall be ‘18’.
Article 2
This Decision shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Done at Brussels, 11 March 2016.
For the Commission
The President
Jean-Claude JUNCKER
(2) Commission Implementing Regulation (EU) No 725/2011 of 25 July 2011 establishing a procedure for the approval and certification of innovative technologies for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (OJ L 194, 26.7.2011, p. 19).
(3) https://circabc.europa.eu/w/browse/42c4a33e-6fd7-44aa-adac-f28620bd436f
(4) Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 2007 on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (OJ L 171, 29.6.2007, p. 1).
(5) Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (OJ L 199, 28.7.2008, p. 1).
(6) Directive 2007/46/EC of the European Parliament ad of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive (OJ L 263, 9.10.2007, p. 1).
ANNEX
METHODOLOGY TO DETERMINE THE CO2 SAVINGS OF THE ENTHALPY STORAGE TANK TECHNOLOGY
1. INTRODUCTION
In order to determine the CO2 reduction that can be attributed to the use of the enthalpy storage tank technology (EST system), it is necessary to establish the following:
|
(a) |
the testing procedure to be followed for determining the cool-down curves of the baseline vehicle (the vehicle fitted with a deactivated enthalpy storage tank) and the eco-innovation vehicle; |
|
(b) |
the testing procedure to be followed for determining the CO2 emission at different engine coolant start temperature; |
|
(c) |
the testing procedure to be followed for determining the theoretical temperature of the engine after discharging the EST system; |
|
(d) |
the testing procedure to be followed for determining the Hot start benefit; |
|
(e) |
the formulae to be used for determining the CO2 savings; |
|
(f) |
the formulae to be used for determining the statistical error and significance of the results. |
2. SYMBOLS AND ABBREVIATIONS
Latin symbols
|
BTA |
— |
CO2 emission of the vehicle under type approval conditions [g CO2/km] |
|
|
— |
CO2 savings [g CO2/km] |
|
CO2 |
— |
Carbon dioxide |
|
CO2 (Tk) |
— |
Arithmetic mean of the CO2 emissions of the vehicle measured using NEDC cycle, ambient temperature of 14 °C and engine coolant start temperatures Tk [g CO2/km] |
|
deng |
— |
Temperature decay factor of the engine coolant cool down curve [1/h] |
|
dEST |
— |
Temperature decay factor of the EST cool down curve [1/h] |
|
EST |
— |
Enthalpy Storage Tank |
|
K |
— |
Effective ratio of thermal inertias [-] |
|
m |
— |
Number of measurements of the sample |
|
NEDC |
— |
New European Driving Cycle |
|
|
— |
Normalised fuel consumption potential at the engine coolant start temperature for the selected parking times ti [-] |
|
pt |
— |
Parking time [h] |
|
Teng |
— |
Temperature of the engine coolant during parking time [°C] |
|
Tengmod |
— |
Theoretical engine coolant temperature after discharging the EST system [°C] |
|
TEST |
— |
Temperature of the EST coolant during parking time [°C] |
|
Tcold |
— |
Cold start temperature [°C] which is 14 °C |
|
Thot |
— |
Hot start temperature [°C] which is the coolant temperature reached at the end of the NEDC cycle |
|
SOC |
— |
State of charge |
|
SVSpt |
— |
Share of parking time distribution [%] as defined in Table 6 |
|
WFti |
— |
Weighting factor for the parking time ti [%] as defined in Table 3 |
Subscripts
Index ti refers to the selected parking times as defined in Table 1
Index j refers to measurements of the sample
Index k refers to engine coolant start temperatures
3. DETERMINING THE COOL-DOWN CURVES AND TEMPERATURES
The cool-down curves shall be determined experimentally for the baseline vehicle engine coolant and the eco-innovation vehicle coolant. The same curves shall be applicable for vehicle variants with the same heat capacities, engine bay packaging, engine heat insulation and EST system. The experimental tests shall include continuous measurements of the representative coolant temperatures of the engine coolant and the coolant stored in the EST system by means of thermocouples at a constant ambient temperature of at least 14 °C for 24 h. The engine shall be heated up to the maximum coolant temperature before cut-off by a sufficient number of consecutive NEDC tests. After preconditioning, the ignition shall be switched off and the dash key pulled out. The car's bonnet shall be closed completely. Any artificial ventilation system inside the test cell shall be switched off.
The resulting measured cool-down curves shall be converged by the mathematical approach described by Formula 1 and Formula 2 for the engine and the EST system respectively.
Formula 1
Formula 2
The least squares method shall be used for the fitting of the curves. To do that, at least the temperature measurement data of the first 30 minutes after engine cut-off are not to be considered because of the untypical behaviour of the coolant temperature after switching off the coolant system.
Using Formula 1, the engine temperature at specific parking time conditions (
Table 1
Engine temperature at selected parking time conditions
|
Selected parking time (ti) |
t1 |
t2 |
t3 |
|
pt [h] |
2,5 |
4,5 |
16,5 |
|
|
|
|
|
4. DETERMINING THE CO2 EMISSION AT DIFFERENT COOLANT START TEMPERATURES
The emission of CO2 and fuel consumptions of the vehicle have to be measured in accordance with Annex 6 to UN/ECE Regulation No 101 (Method of measuring emission of carbon dioxide and fuel consumption of vehicles powered by an internal combustion engine only). The procedure should be modified accordingly to the following:
|
1. |
the ambient temperature in the test cell shall be below 14 °C; |
|
2. |
the 5 engine coolant start temperatures shall be the followings: Tcold, Thot,
|
The tests can be performed at any order. It is possible to perform one or two preconditioning NEDC tests between the tests. It shall be ensured and documented that the state of charge (SOC) of the starter battery (for example, using its Controller Area Network signal) after each test is within 5 %.
The complete tests procedure shall be repeated at least three times (i.e. m ≥ 3). Arithmetic means of the CO2 results at each engine coolant start temperatures (Tk) shall be calculated using Formula 3 and given in Table 2.
Formula 3
where k = 1, 2, …, 5
|
T1 = Tcold |
T2 = Thot |
|
|
|
Table 2
CO2 emission at different engine coolant start temperatures
|
Engine coolant starting temperature Tk |
Tcold |
Thot |
|
|
|
|
CO2(Tk) [g CO2/km] |
|
|
|
|
|
5. DETERMINING THE THEORETICAL TEMPERATURE OF THE ENGINE AFTER DISCHARGING THE EST SYSTEM
Using the test results defined in paragraph 4 and reported in Table 2, the Normalised fuel consumption potential NP(
Formula 4
Then, the theoretical engine coolant temperature after discharging the EST system for the selected parking time conditions 
Formula 5
The relative ratio of thermal inertias Kti at the selected parking time conditions shall be defined using Formula 6.
Formula 6
The resulting effective ratio of thermal inertias K is calculated weighting the three results Kti by the share of vehicle stops, as defined by Formula 7.
Formula 7
where
|
WFti |
— |
Weighting factor for the parking time ti [-] as defined in Table 3 |
Table 3
Weighting parameter for K factor calculation
|
WFt1 [%] |
63,4 |
|
WFt2 [%] |
14,0 |
|
WFt3 [%] |
22,6 |
The theoretical temperature of the engine after discharging the EST system for the parking time condition pt 
Formula 8
The calculation results shall be given in Table 4
Table 4
Theoretical temperature of the engine after discharging the EST system for different parking times
|
pt [h] |
0,5 |
1,5 |
2,5 |
3,5 |
4,5 |
5,5 |
6,5 |
7,5 |
8,5 |
9,5 |
10,5 |
11,5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
pt [h] |
12,5 |
13,5 |
14,5 |
15,5 |
16,5 |
17,5 |
18,5 |
19,5 |
20,5 |
21,5 |
22,5 |
23,5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6. DETERMINING THE HOT START BENEFIT
The hot start benefit (HSB) of the vehicle fitted with the technology shall be determined experimentally with Formula 9. This value describes the difference of CO2 emissions between a cold start and a hot start NEDC test in relation to the cold start result.
Formula 9
7. DETERMINING THE CO2 SAVINGS
Prior to the launch of the official Type I test to be performed in accordance with Regulation (EC) No 692/2008, the type approval authority shall verify that the coolant temperature, including inside the enthalpy storage tank, is within ± 2 K of the temperature of the room. Where this temperature is not achieved, the methodology for determining the CO2 savings for the EST may not be applied.
The verification may be performed either by a measurement inside the Enthalpy Storage Tank (e.g. by means of a thermocouple), or by turning off the EST system before the conditioning procedure in order not to store heated coolant inside the tank. The temperature inside the enthalpy storage tank shall be recorded in the test report.
The relative CO2 reduction potential 
Formula 10
The calculation results shall be given in Table 5
Table 5
Relative CO2 reduction potential
|
pt [h] |
0,5 |
1,5 |
2,5 |
3,5 |
4,5 |
5,5 |
6,5 |
7,5 |
8,5 |
9,5 |
10,5 |
11,5 |
|
ΔCO2(pt) [%] |
|
|
|
|
|
|
|
|
|
|
|
|
|
pt [h] |
12,5 |
13,5 |
14,5 |
15,5 |
16,5 |
17,5 |
18,5 |
19,5 |
20,5 |
21,5 |
22,5 |
23,5 |
|
ΔCO2(pt) [%] |
|
|
|
|
|
|
|
|
|
|
|
|
The CO2 savings weighted by the parking times (pt) shall be calculated using Formula 11.
Formula 11
where:
|
SVSpt |
— |
Share of parking time distribution [%] as defined in Table 6 |
Table 6
Parking time distribution (share of vehicle stops)
|
pt [h] |
0,5 |
1,5 |
2,5 |
3,5 |
4,5 |
5,5 |
6,5 |
7,5 |
8,5 |
9,5 |
10,5 |
11,5 |
|
SVSpt [%] |
36 |
13 |
6 |
4 |
2 |
2 |
1 |
1 |
3 |
4 |
3 |
1 |
|
pt [h] |
12,5 |
13,5 |
14,5 |
15,5 |
16,5 |
17,5 |
18,5 |
19,5 |
20,5 |
21,5 |
22,5 |
23,5 |
|
SVSpt [%] |
1 |
3 |
3 |
2 |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
8. CALCULATION OF THE STATISTICAL ERROR
The statistical errors in the outcomes of the testing methodology caused by the measurements are to be quantified. For each test performed at the different engine coolant start temperatures, the standard deviation of the arithmetic mean is calculated as defined by Formula 12.
Formula 12
where k = 1, 2, …, 5
|
T1 = Tcold |
T2 = Thot |
|
|
|
The standard deviation of the CO2 savings 
Formula 13
where
9. STATISTICAL SIGNIFICANCE
It has to be demonstrated for each type, variant and version of a vehicle fitted with the EST system that the error in the CO2 savings calculated with Formula 13 is not greater than the difference between the total CO2 savings and the minimum savings threshold specified in Article 9(1) of Regulation (EU) No 725/2011 (see Formula 14).
Formula 14
where:
|
MT |
: |
Minimum threshold [gCO2/km], which is 1 gCO2/km |
|
|
: |
CO2 correction coefficient due to the mass increase due to the installation of the EST system. For |
Table 7
CO2 correction coefficient due to the extra mass
|
Type of fuel |
CO2 correction coefficient due to the extra mass ( [g CO2/km] |
|
Petrol |
0,0277 · Δm |
|
Diesel |
0,0383 · Δm |
In Table 7 Δm is the extra mass due to the installation of the EST system. It is the mass of the EST system fully charged with the coolant.
10. THE EST SYSTEM TO BE FITTED IN VEHICLES
The type approval authority is to certify the CO2 savings based on measurements of the EST system using the test methodology set out in this Annex. Where the CO2 emission savings are below the threshold specified in Article 9(1), the second subparagraph of Article 11(2) of Regulation (EU) No 725/2011 shall apply.