Choose the experimental features you want to try

This document is an excerpt from the EUR-Lex website

Document 32019R2020R(01)

Corrigendum to Commission Regulation (EU) 2019/2020 of 1 October 2019 laying down ecodesign requirements for light sources and separate control gears pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulations (EC) No 244/2009, (EC) No 245/2009 and (EU) No 1194/2012 (Official Journal of the European Union L 315 of 5 December 2019)

OJ L 50, 24.2.2020, p. 22–22 (BG, ES, CS, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
OJ L 50, 24.2.2020, p. 23–23 (DA, DE)
OJ L 50, 24.2.2020, p. 24–24 (ET)

ELI: http://data.europa.eu/eli/reg/2019/2020/corrigendum/2020-02-24/oj

24.2.2020   

EN

Official Journal of the European Union

L 50/22


Corrigendum to Commission Regulation (EU) 2019/2020 of 1 October 2019 laying down ecodesign requirements for light sources and separate control gears pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulations (EC) No 244/2009, (EC) No 245/2009 and (EU) No 1194/2012

( Official Journal of the European Union L 315 of 5 December 2019 )

1. On page 212, in Article 2, under point 1, point (a) is replaced with the following:

‘(a)

chromaticity coordinates x and y in the range

0,270 < x < 0,530 and

–2,3172 x2 +2,3653 x –0,2199 < y < –2,3172 x2 +2,3653 x –0,1595;’

2. On page 225, in Annex II, in Table 2, the row for ‘High luminance light sources (HLLS)’ is replaced with the following:

‘High luminance light sources (HLLS)

+0,0058 · Luminance-HLLS –0,0167 ’

3. On page 226, in Annex II, in Table 3, the row for ‘Control gear for LED or OLED light sources’ is replaced with the following:

‘Control gear for LED or OLED light sources

 

all wattages Pcg

Pcg 0,81/(1,09 × Pcg 0,81+2,10 )’


Top