52022PC0183

EUROPEAN COMMISSION

Brussels, 26.4.2022

COM(2022) 183 final

2022/0124(NLE)

Proposal for a

COUNCIL REGULATION

amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products

EXPLANATORY MEMORANDUM

1.CONTEXT OF THE PROPOSAL

•Reasons for and objectives of the proposal

In order to ensure sufficient and uninterrupted supplies of certain agricultural and industrial products which are insufficiently produced or not produced at all in the Union and to avoid any disturbances on the market for these products, some Common Customs Tariff duties have been partially or totally suspended by Council Regulation (EU) No 2021/2278 (hereinafter "the Regulation") 1 .

The Regulation is updated every six months to accommodate the needs of Union industry.

The Commission, assisted by the Economic Tariff Questions Group, has reviewed all requests from the Member States for autonomous tariff suspensions.

Following this review, the Commission considers that the suspension of duties is justified for some new products, currently not listed in the Annex of the Regulation. In relation to some other products, it is necessary to modify the conditions in terms of product description and classification. Products for which a tariff suspension is no longer in the Union's economic interest are proposed to be withdrawn.

•Consistency with existing policy provisions in the policy area

This proposal does not affect countries that have a preferential trading agreement with the Union nor candidate countries or potential candidates for preferential agreements with the Union (e.g. Generalised System of Preferences; the African, Caribbean and Pacific group trade regime; Free Trade Agreements).

•Consistency with other Union policies

The proposal is in line with Union policies in the area of agriculture, trade, enterprise, environment, development and external relations.

2.LEGAL BASIS, SUBSIDIARITY AND PROPORTIONALITY

•Legal basis

The legal basis of this proposal is Article 31 of the Treaty on the Functioning of the European Union (TFEU).

•Subsidiarity (for non-exclusive competence)

The proposal falls under the exclusive competence of the Union. The subsidiarity principle therefore does not apply.

•Proportionality

The proposal complies with the principle of proportionality. The measures envisaged are in line with the principles for simplifying procedures for operators engaged in foreign trade, as stated in the Commission communication concerning autonomous tariff suspensions and quotas 2 . This Regulation does not go beyond what is necessary to achieve the objectives pursued in accordance with Article 5(4) of the Treaty on European Union (TEU).

•Choice of the instrument

By virtue of Article 31 of the TFEU, "Common Customs Tariff duties shall be fixed by the Council on a proposal from the Commission". Therefore, a Council regulation is the appropriate instrument.

3.RESULTS OF EX-POST EVALUATIONS, STAKEHOLDER CONSULTATIONS AND IMPACT ASSESSMENTS

•Ex-post evaluations/fitness checks of existing legislation

The autonomous suspensions scheme was subject to an evaluation study carried out in 2013. The evaluation concluded that the core rationale for the scheme remains valid. The cost savings for EU businesses importing goods under the scheme can be significant. In turn, depending on the product, company and sector, these savings can have wider benefits, such as boosting competitiveness, making production methods more efficient, and creating or keeping jobs in the Union. Details of the savings stemming from this regulation can be found in the attached legislative financial statement.

•Stakeholder consultations

The Economic Tariff Questions Group (ETQG), which consists of representatives from all Member States plus Turkey, assisted the Commission in the preparation of this proposal

The ETQG carefully examined each case to ensure that it would not cause any harm to Union enterprises and would strengthen and consolidate the competitiveness of Union's production. The members of the ETQG carried out the assessment through discussions, and Member States, in turn, consulted the concerned industries, associations, chambers of commerce and other stakeholders involved.

All listed suspensions correspond to agreements or compromises reached in the discussions of the ETQG. No potential serious risk with irreversible consequences was identified.

•Impact assessment

The proposed amendment is of a purely technical nature and concerns only the coverage of the suspensions currently listed in the Annex to Council Regulation (EU) No 2021/2278. An impact assessment was not carried out because the proposed changes in the list of products that would benefit from the autonomous Common Customs Tariff duties suspension are not expected to have significant impacts.

•Fundamental rights

The proposal has no consequences on fundamental rights.

4.BUDGETARY IMPLICATIONS

This proposal has no financial impact on expenditure, but has a financial impact on revenue. Uncollected customs duties corresponding to the suspension will amount approximately EUR 39 725 358 per year. The negative effect on the budget’s traditional own resources is EUR 29 794 018 per year (i.e. 75 % of the total). The legislative financial statement sets out the budgetary implications of the proposal in greater detail.

The loss of revenue in traditional own resources shall be compensated by Member States Gross National Income (GNI) based on resource contributions.

5.OTHER ELEMENTS

•Implementation plans and monitoring, evaluation and reporting arrangements

The proposed measures are managed within the framework of the Integrated Tariff of the European Union (TARIC) and applied by customs administrations of the Member States.

2022/0124 (NLE)

Proposal for a

COUNCIL REGULATION

amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances on the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council 3 (‘CCT duties’) on those products have been suspended by Council Regulation (EU) 2021/2278 4 . As a result, the products listed in the Annex to Regulation (EU) 2021/2278 can be imported into the Union at reduced or zero duty rates.

(2)The Union production of certain products that are not listed in the Annex to Regulation (EU) 2021/2278 is inadequate to meet the specific requirements of the user industries in the Union. As it is in the Union's interest to ensure an adequate supply of certain products and having regard to the fact that that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to grant a complete suspension of the CCT duties on those products.

(3)With a view to promoting integrated battery production in the Union in accordance with the Communication from the Commission of 17 May 2018 entitled ‘Europe on the Move – Sustainable Mobility for Europe: safe, connected, and clean’ 5 , a partial suspension of the CCT duties should be granted in respect of certain products related to the battery production that are currently not listed in the Annex to Regulation (EU) 2021/2278.

(4)The date for the mandatory review of those suspensions concerning products related to battery production should be 31 December 2022, in order for that review to take into account the short-term evolution of the battery sector in the Union.

(5)It is necessary to amend the product description and classification for certain CCT duty suspensions listed in the Annex to Regulation (EU) 2021/2278 in order to take into account technical product developments and economic trends in the market.

(6)It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) 2021/2278. The suspensions for those products should therefore be deleted.

(7)Regulation (EU) 2021/2278 should therefore be amended accordingly.

(8)In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the Communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas 6 , the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 July 2022. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) 2021/2278 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2022.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels,

For the Council

The President

LEGISLATIVE FINANCIAL STATEMENT

1.NAME OF THE PROPOSAL:

Proposal for amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2) point (c) of Regulation (EU) No 952/2013 on certain agricultural and industrial products

2.BUDGET LINES:

Chapter and Article: Chapter 12, Article 120

Amount budgeted for the year 2022: 17 912 606 159

3.FINANCIAL IMPACT

◻ Proposal has no financial implications

X Proposal has no financial impact on expenditure but has a financial impact on revenue - the effect is as follows:

(EUR million to one decimal place)

Budget line

Revenue

6 month period, starting dd/mm/yyyy

[Year: second half of 2022]

Article 120

Impact on own resources

01/07/2022

-14,9

Situation following action
	[2022 – 2026]
Article 120	- 29,8 EUR million/ year

The Annex contains 55 new products. The uncollected duties corresponding to these suspensions, calculated on the basis of requesting Member State projections for the period 2022 to 2026, amount to EUR 30 203 402 per year.

On the basis of the existing statistics for preceding years, it would appear, however, necessary to increase this amount by an average factor, estimated at 1,8 to take account of imports into other Member States using the same suspensions. This means uncollected duties of some EUR 54 366 124 per year.

Eight products have been withdrawn from this Annex reflecting the reintroduction of customs duties. This represents an increase of EUR 14 640 766 per year in the collection of duties, as estimated on the basis of 2021 statistics.

On the basis of the above, the impact on the loss of revenue for the EU budget resulting from this Regulation is estimated at 54 366 124 – 14 640 766 = EUR 39 725 358 (gross amount, including collection costs) x 0,75 = EUR 29 794 018 per year.

4.ANTI-FRAUD MEASURES

Checks on the end-use of some of the products covered by this Council Regulation will be carried out in accordance with Article 254 of Regulation (EU) No 952/2013.

In addition, Member States may carry out any customs controls they deem appropriate under the risk management they undertake, as provided for by Article 46 of Regulation (EU) No 952/2013.

(1) OJ L 466, 29.12.2021, p.1

(2) OJ C 363, 13.12.2011, p. 6.

(3) Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).

(4) Council Regulation (EU) 2021/2278 of 20 December 2021 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products, and repealing Regulation (EU) No 1387/2013 (OJ L 466, 29.12.2021, p.1)

(5) COM/2018/293 final.

(6) OJ C 363, 13.12.2011, p. 6.

Top

EUROPEAN COMMISSION

Brussels, 26.4.2022

COM(2022) 183 final

ANNEX

to the

Proposal for a COUNCIL REGULATION

amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products

ANNEX

The Annex is amended as follows:

(1)the entries with the following serial numbers are deleted: 0.3965, 0.4050, 0.4890, 0.4934, 0.5487, 0.7369, 0.8088 and 0.8210

(2)the following entries replace those entries that have the same serial numbers:

Serial Number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date envisaged for mandatory review

‘0.7284

ex 2106 90 92

ex 3504 00 90

Casein protein hydrolysate consisting of:

—	by weight 20 % or more but not more than 70 % free amino acids, and
—	peptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da

0 %

31.12.2022

0.2542

ex 2903 47 00

1,1,1,3,3-Pentafluoropropane (HFC-245fa) (CAS RN 460-73-1)

0 %

31.12.2023

0.3616

ex 2922 19 00

2-(2-Methoxyphenoxy)ethanamine (CAS RN 1836-62-0) with a purity by weight of 98 % or more

0 %

31.12.2024

0.8137

ex 3208 90 19

ex 3911 90 99

Mixture, containing by weight:

—	20 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0),
—	7 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3),
—	40 % or more, but not more than 65 % of ethanol (CAS RN 64-17-5),
—	1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3)

0 %

31.12.2025

0.5560

ex 3904 69 80

Copolymer of ethylene and chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, whether or not containing fillers

0 %

31.12.2022

0.2759

ex 3907 30 00

Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8504, 8533, 8535, 8536, 8541, 8542 or 8548

(1)

0 %

31.12.2023

0.5172

ex 3912 39 85

Hypromellose (INN) (CAS RN 9004-65-3)

0 %

31.12.2022

0.4844

ex 3921 90 55

Prepreg sheets or rolls containing polyimide resin

0 %

31.12.2024

0.8024

ex 5603 14 10

Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:

—	of weight of 160 g/m2 or more but not more than 300 g/m2,
—	with a filtration efficiency of class M or better (according to DIN 60335-2-69),
—	pleatable,

with at least one of following treatments:

—	a coating or covering with polytetrafluoroethylene (PTFE),
—	a coating with aluminium particles,
—	a coating of phosphorous based flame retardants,
—	a nano fiber coating of a polyamide, a polyurethane or a fluorine-containing polymer

0 %

m²

31.12.2023

0.5987

ex 5603 14 90

Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:

—	of weight of 160 g/m2 or more but not more than 300 g/m2,
—	with a filtration efficiency of class M or better (according to DIN 60335-2-69),
—	pleatable,
—	with or without an expanded polytetrafluoroethylene (ePTFE) membrane

0 %

m²

31.12.2023

0.4476

ex 7019 61 00

ex 7019 65 00

ex 7019 66 00

ex 7019 90 00

Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°C and 120°C (measured according to IPC-TM-650) of:

—	10ppm per°C or more but not more than 12ppm per°C in the length and width, and
—	20ppm per°C or more but not more than 30ppm per°C in the thickness, with a glass transition temperature of 152°C or more but not more than 153°C (measured according IPC-TM-650)

0 %

31.12.2023

0.7996

ex 8418 99 90

Aluminium connecting block for connecting to a condenser manifold in welding process:

—	hardened to T6 or T5 temper,
—	with a weight of not more than 150 g,
—	with a length of 20 mm or more but not more than 150 mm,
—	with a fixing rail in one piece

0 %

p/st

31.12.2025

0.8004

ex 8418 99 90

Receiver dryer profile for connecting to a condenser manifold in welding process with:

—	a braze flatness of not more than 0,2 mm,
—	a weight of 100 g or more but not more than 600 g,
—	a fixing rail in one piece

0 %

p/st

31.12.2025

0.7375

ex 8481 10 19

ex 8481 10 99

Electromagnetic pressure reducing valve

—	with a plunger,
—	with an operating pressure of not more than 325 MPa,
—	with a plastic connector with 2 silver or tin, or silver-plated, or tin-plated, or silver and tin plated pins

0 %

31.12.2022

0.7029

ex 8505 11 00

Articles in the form of a triangle, square, rectangle, or trapezoid, whether or not arched, with rounded corners or oblique sides, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions:

—	a length of 9 mm or more but not more than 105 mm,
—	a width of 5 mm or more but not more than 105 mm, and
—	a height of 2 mm or more but not more than 55 mm

0 %

31.12.2026

0.5548

ex 8507 60 00

Modules for the assembly of batteries of ion lithium electric accumulators with:

—	a length of 298 mm or more, but not more than 500 mm,
—	a width of 33,5 mm or more, but not more than 209 mm,
—	a height of 75 mm or more, but not more than 228 mm,
—	a weight of 3,6 kg or more, but not more than 17 kg, and
—	a power of 458 Wh or more, but not more than 2 900 Wh

1.3 %

31.12.2022

0.7489

ex 8529 90 92

OLED modules, consisting of one or more TFT glass or plastic cells,

—	a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm,
—	with a thickness of not more than 55mm,
—	containing organic material,
—	with control electronic for pixel addressing only,
—	with V-by-One Interface and with or without a plug for power supply,
—	with back cover,

of a kind used in the manufacture of TV sets and monitors

0 %

31.12.2023

0.3959

ex 8540 71 00

Continuous wave magnetron with:

—	a fixed frequency of 2 460 MHz,
—	a packaged magnet,
—	a probe output,
—	an output power of 960 or more but not more than 1500 W

0 %

31.12.2023

0.6687

ex 8708 95 10

ex 8708 95 99

Inflatable sewn safety cushion of high strength polyamide fibre:

—	folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or
—	flat safety cushion with or without thermal folding

0 %

p/st

31.12.2025

(1)	Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)’

(3)the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Serial Number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date envisaged for mandatory review

‘0.8296

ex 2826 90 80

Lithium hexafluorophosphate (CAS RN 21324-40-3) with a purity by weight of 99 % or more

2.7 %

31.12.2022

0.8237

ex 2845 90 10

4-(Tert-Butyl)-2-(2-(methyl-d3)propan-2-yl-1,1,1,3,3,3-d6)phenol (CAS RN 2342594-40-3) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8282

ex 2903 19 00

1,3-Dichloropropane (CAS RN 142-28-9) with a purity by weight of 99 % or more

0 %

31.12.2026

0.8241

ex 2909 49 80

3,4-Dimethoxybenzyl alcohol (CAS RN 93-03-8) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8288

ex 2914 40 90

Benzoin (CAS RN 119-53-9) with a purity by weight of 99 % or more

0 %

31.12.2026

0.8311

ex 2915 90 70

Pelargonic acid (CAS RN 112-05-0) with a purity by weight of 95 % or more

0 %

31.12.2026

0.8302

ex 2917 19 80

Maleic acid (CAS RN 110-16-7) with a purity by weight of 99 % or more

3.2 %

31.12.2022

0.8255

ex 2917 39 95

3-(4-Chlorophenyl)glutaric acid (CAS RN 35271-74-0) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8256

ex 2918 30 00

Methyl 3-oxo-pentanoate (CAS RN 30414-53-0) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8297

ex 2920 90 10

Ethylene carbonate (CAS RN 96-49-1) with a purity by weight of 99 % or more

3.2 %

31.12.2022

0.8298

ex 2920 90 10

Vinylene carbonate (CAS RN 872-36-6) with a purity by weight of 99,9 % or more

3.2 %

31.12.2022

0.8299

ex 2920 90 10

Vinyl ethylene carbonate (CAS RN 4427-96-7) with a purity by weight of 99 % or more

3.2 %

31.12.2022

0.8234

ex 2922 49 85

4-Amino-2-chlorobenzoic acid (CAS RN 2457-76-3) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8236

ex 2922 49 85

(E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CAS RN 1690340-79-4) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8283

ex 2924 19 00

N,N-Dimethylcarbamoyl chloride (CAS RN 79-44-7) with a purity by weight of 99 % or more

0 %

31.12.2026

0.8235

ex 2924 29 70

N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8258

ex 2924 29 70

N,N'-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 41131-65-1) with a purity by weight of 97 % or more

0 %

31.12.2026

0.8272

ex 2931 90 00

Tert-Butylchlorodimethylsilane (CAS RN 18162-48-6) with a purity by weight of 99 % or more

0 %

31.12.2026

0.8252

ex 2932 19 00

(3S)-3-[4-[(5-Bromo-2-chlorophenyl)methyl]phenoxy]tetrahydro-furan (CAS RN 915095-89-5) with a purity by weight of 97 % or more

0 %

31.12.2026

0.8257

ex 2932 99 00

1,4,7,10,13-Pentaoxacyclopentadecane (CAS RN 33100-27-5) with a purity by weight of 90 % or more, the remainder mainly consisting of lineair precursors

0 %

31.12.2026

0.8240

ex 2933 19 90

3-[2-(Dispiro[2.0.24.13]heptan-7-yl)ethoxy]-1H-pyrazole-4-carboxylic acid (CAS RN 2608048-67-3) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8312

ex 2933 21 00

Sodium (5S,8S)-8-methoxy-2,4-dioxo-1,3-diazaspiro[4.5]decan-3-ide (CAS RN 1400584-86-2) with a purity by weight of 90 % or more

0 %

31.12.2026

0.8238

ex 2933 39 99

(S)-6-Bromo-2-(4-(3-(1,3-dioxoisoindolin-2-yl)propyl)-2,2-dimethylpyrrolidin-1-yl)nicotinamide (CAS RN 2606972-45-4) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8239

ex 2933 39 99

Perfluorophenyl 6-fluoropyridine-2-sulfonate (CAS RN 2608048-81-1) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8266

ex 2933 39 99

Glasdegib maleate (INN) (CAS RN 2030410-25-2) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8248

ex 2933 59 95

5-(5-Chlorosulfonyl-2-ethoxyphenyl)-1-methyl-3-propyl-1,6-dihydro-7H-pyrazolo[4,3-d]pyrimidin-7-one (CAS No 139756-22-2) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8243

ex 2933 59 95

2-(4-Phenoxyphenyl)-7-(piperidin-4-yl)-4,5,6,7-tetrahydropyrazolo[1,5-a]pyrimidine-3-carbonitrile (CAS RN 2190506-57-9) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8290

ex 2933 99 80

2-(2-Ethoxyphenyl)-5-methyl-7-propylimidazolo[5,1-f][1,2,4]-triazin-4(3H)-one (CAS RN 224789-21-3) with a purity by weight of 95 % or more

0 %

31.12.2026

0.8249

ex 2933 99 80

Dibenz[b,f]azepine-5-carbonyl chloride (CAS RN 33948-22-0) with a purity by weight of 98 % or more

0 %

31.12.2026

0.8284

ex 2933 99 80

1H-1,2,3-Triazole (CAS RN 288-36-8) or 2H-1,2,3-triazole (CAS RN 288-35-7) with a purity by weight of 99 % or more

0 %

31.12.2026

0.8250

ex 2934 99 90

Methyl (1R,3R)-1-(1,3-benzodioxol-5-yl)-2-(2-chloroacetyl)-1,3,4,9-tetrahydropyrido[5,4-b]indole-3-carboxylate (CAS RN 171489-59-1) with a purity by weight of 99 % or more

0 %

31.12.2026

0.8253

ex 2934 99 90

4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) with a purity by weight of 97 % or more

0 %

31.12.2026

0.8267

ex 2934 99 90

Nusinersen sodium (INNM) (CAS RN 1258984-36-9) with a purity by weight of 95 % or more

0 %

31.12.2026

0.8289

ex 2934 99 90

3,4-Dichloro-1,2,5-thiadiazole (CAS RN 5728-20-1) with a purity by weight of 99 % or more

0 %

31.12.2026

0.8276

ex 2935 90 90

Methyl 2-(chlorosulfonyl)-4-(methylsulfonamidomethyl)benzoate (CAS RN 393509-79-0) with a purity by weight of 90 % or more

0 %

31.12.2026

0.8277

ex 2935 90 90

3-({[(4-methylphenyl)sulfonyl]carbamoyl}amino)phenyl 4-methylbenzenesulfonate (CAS RN 232938-43-1) with a purity by weight of 99 % or more

0 %

31.12.2026

0.8273

ex 3812 39 90

2-Aminoethanol reaction products with cyclohexane and peroxidized N-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (CAS RN 191743-75-6) with a purity by weight of 99 % or more

0 %

31.12.2026

0.8278

ex 3824 99 92

({[2-(trifluoromethyl)phenyl]carbonyl}amino)methyl acetate (CAS RN 895525-72-1) with a content of at least 45 % by weight dissolved in N,N-dimethylacetamide (CAS RN 127-19-5)

0 %

31.12.2026

0.8287

ex 3824 99 92

Solution of methyl cis-1-{[(2,5-dimethylphenyl)acetyl]amino}-4-methoxycyclohexanecarboxylate (CAS RN 203313-47-7) in N,N-dimethylacetamide (CAS RN 127-19-5), containing by weight 25 % or more but not more than 45 % of the carboxylate

0 %

31.12.2026

0.8268

ex 3917 32 00

Heat shrinkable tube:

—	containing by weight 80 % or more polymer,
—	with an insulation resistance of 90 MW or more,
—	with a dielectric strength of 35 kV / mm or more,
—	with a wall thickness of 0,04 mm or more, but not more than 0,9 mm,
—	with a lay-flat width of 18 mm or more, but not more than 156 mm,

for use in the manufacture of aluminium electrolytic capacitors

(1)

0 %

31.12.2022

0.8274

ex 3920 61 00

Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a:

—	total thickness of more than 230 μm but not more than 270 μm,
—	top layer thickness of more than 40 μm but not more than 55 μm,
—	defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287),
—	UV-stabilized top layer

0 %

31.12.2026

0.8291

ex 3921 90 55

Membrane composed of a polyamide layer and a polysulfone layer on a cellulose support layer with:

—	a total thickness of 0,25 mm or more but not more than 0,40 mm,
—	a total weight of 109 g/m2 or more but not more than 114 g/m2

0 %

31.12.2026

0.8265

ex 7007 11 10

Specifically shaped and toughened safety glass:

—	with a width of 200 mm or more but not more than 600 mm,
—	with a height of 150 mm or more but not more than 500 mm,

for use in the manufacture of motor vehicle window assemblies

(1)

0 %

31.12.2026

0.8247

ex 8302 10 00

Armrest hinge made of magnesium with:

—	a length of 255 mm or more but not more than 265 mm,
—	a width of 155 mm or more but not more than 165 mm,
—	a height of 115 mm or more but not more than 125 mm,
—	mounting holes for a lock mechanism

0 %

31.12.2026

0.8304

ex 8302 30 00

Two cold-formed steel supports:

—	with a length of 160 mm or more but not more than 180 mm,
—	with a width of 60 mm or more but not more than 80 mm,
—	with a height of 60 mm or more but not more than 80 mm,
—	with a movable riveted connection,
—	with or without elastomeric bumper,
—	forming a mechanism for indirect movement of the mechanism of the longitudinal positioner of car seats, interacting with the safety latch,
—	attached to the mechanism of the longitudinal positioner by means of a detachable screw connection, riveting, welding or spot welding

0 %

31.12.2026

0.8260

ex 8407 34 10

Spark-ignition reciprocating or rotary internal combustion piston engines, with:

—	a cylinder capacity of 1 200 cm3 or more but not more than 2 000 cm3
—	a power of 95 kW but not more than 135 kW,
—	a weight of not more than 120 kg,

for use in the manufacture of motor vehicles of 8703

(1)

0 %

31.12.2026

0.8300

ex 8408 90 65

ex 8408 90 67

ex 8408 90 81

Compression-ignition internal combustion piston engines:

—	of the inline type,
—	with a cylinder capacity of 7 100 cm3 or more but not more than 18 000 cm3,
—	with a power of 205 kW or more but not more than 597 kW,
—	with an exhaust after-treatment module,
—	with external width/height/depth dimensions of not more than 1 310/1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm,

for use in the manufacture of crushing, screening or separation machines

(1)

0 %

31.12.2026

0.8244

ex 8409 91 00

Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy EN AC-45500, with:

—	no other components,
—	a hardness of 52 HRB or more,
—	casting defects size of not more than 0,4 mm and not more than 10 defects per cm2,
—	a dendrite arm space in combustion chamber of not more than 25 μm,
—	a double deck water jacket design and
—	a weight of 18 kg or more but not more than 19 kg,
—	a length of 506 mm or more but not more than 510 mm,
—	a height of 282 mm or more but not more than 286 mm,
—	a width of 143,7 mm or more but not more than 144,3 mm,

in one single consignment of 1 000 pieces or more

0 %

31.12.2026

0.8303

ex 8483 40 25

Worm gearbox

—	in an aluminium alloy housing,
—	with a plastic or steel worm,
—	with mounting holes,
—	with a 90 degree reversible drive direction,
—	with a 4:19 transmission ratio,
—	equipped with a lead screw with a length of 333 mm and a guide nut incorporated into the assembly bracket, with or without a lead screw support,

for indirect connection to the drive motor of a car seat guide system

(1)

0 %

31.12.2026

0.8285

ex 8501 53 50

Permanent magnet traction AC motor, with:

—	a continuous power of 110 kW or more but not more than 150 kW,
—	a liquid cooled system,
—	a total length of 460 mm or more but not more than 590 mm,
—	a total width of 450 mm or more but not more than 580 mm,
—	a total height of 490 mm or more but not more than 590 mm,
—	a weight of not more than 310 kg,
—	4 mounting points

0 %

31.12.2026

0.8259

ex 8507 60 00

Lithium-ion Electric accumulators consisting of 3 modules containing 102 cells in total, with:

—	a nominal capacity of 51 Ah per cell,
—	a nominal voltage of 285 V or more but not more than 426V,
—	a weight of 33 kg or more but not more than 36 kg per module,
—	a length of 1 400 mm or more but not more than 1 600 mm,
—	a height of 340 mm or more but not more than 395 mm,
—	a width of 220 mm or more but not more than 420 mm,

for use in the manufacture of vehicles of subheadings 8703 60 and 8703 80

(1)

1.3 %

31.12.2022

0.8275

ex 8507 60 00

Modules for the assembly of ion lithium electric accumulators with:

—	a length of 570 mm or more, but not more than 610 mm,
—	a width of 210 mm or more, but not more than 240 mm,
—	a height of 100 mm or more, but not more than 120 mm,
—	a weight of 28 kg or more, but not more than 35 kg, and
—	a capacity of not more than 2500 Ah and a nominal energy of less than 7,5 kW,

for use in the manufacture of vehicles of subheadings 8703 60, 8703 70, 8703 80 and 8704 60

(1)

1.3 %

31.12.2022

0.8286

ex 8507 60 00

A rechargeable lithium-ion battery, with:

—	a fuse,
—	a cell-to-pack design,
—	a length of 1 050 mm or more but not more than 1 070 mm,
—	a width of 624 mm or more but not more than 636 mm,
—	a height of 235 mm or more but not more than 245 mm,
—	a mass of 214,4 kg or more but not more than 227,6 kg,
—	a capacity of 228 Ah,
—	an upper outer casing of a composite material,
—	an IP68 protection rating,
—	an energy density of 220Wh/l or more,
—	a specific energy of 159 Wh/kg or more,
—	without contactors,

for the manufacture of batteries for electric buses

(1)

1.3 %

31.12.2022

0.8279

ex 8708 40 20

Transmission gearbox without torque converter, with:

—	dual clutch,
—	7 or more forward gears,
—	1 reverse gear,
—	a maximum torque of 390 Nm,
—	whether or not with electric motor integrated,
—	a height of 480 mm or more but not more than 600 mm,
—	a width of 350 mm or more but not more than 450 mm, and
—	a weight of 80kg or more but not more than 110 kg,

for use in the manufacture of motor vehicles of Heading 8703

(1)

0 %

31.12.2026

0.8292

ex 8708 95 99

Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of vehicles, in each individual consignment of 1 000 pieces or more

0 %

31.12.2026

(1)	Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)’

Top

Choose the experimental features you want to try