Serial Number
|
CN code
|
TARIC
|
Description
|
Rate of autonomous duty
|
Supplementary Unit
|
Date foreseen for mandatory review
|
‘0.3341
|
ex 1515 90 99
|
92
|
Vegetable oil, refined or semi-refined, containing by weight 35 % or more but not more than 57 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid
|
0 %
|
-
|
31.12.2023
|
0.7674
|
ex 2905 32 00
|
20
|
(2S)-propane-1,2-diol (CAS RN 4254-15-3) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2023
|
0.6003
|
ex 2915 90 70
|
27
|
Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more
|
0 %
|
-
|
31.12.2023
|
0.3468
|
ex 2916 13 00
|
40
|
Zinc Dimethacrylate (CAS RN 13189-00-9) in the form of powder with a purity by weight of 99 % or more, with not more than 1 % of a stabiliser
|
0 %
|
-
|
31.12.2023
|
0.2941
|
ex 2920 19 00
|
40
|
Tolclofos-methyl (ISO) (CAS RN 57018-04-9) with a purity by weight of 96 % or more
|
0 %
|
-
|
31.12.2023
|
0.4298
|
ex 2930 20 00
|
40
|
Prosulfocarb (ISO) (CAS RN 52888-80-9) with purity by weight of 97 % or more
|
0 %
|
-
|
31.12.2022
|
0.5920
|
ex 2933 29 90
|
28
|
Prochloraz (ISO) (CAS RN 67747-09-5) with purity by weight of 97 % or more
|
0 %
|
-
|
31.12.2023
|
0.6987
|
ex 2933 59 95
|
52
|
6-Benzyladenine (CAS RN 1214-39-7) with a purity by weight of 97 % or more
|
0 %
|
-
|
31.12.2021
|
0.7815
|
ex 2934 99 90
|
82
|
Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c]pyrrol-1-one (CAS RN 129385-59-7) with a purity by weight of 97 % or more
|
0 %
|
-
|
31.12.2024
|
0.7975
|
ex 3801 10 00
|
30
|
Artificial graphite in powder form, (CAS RN 7782-42-5) with:
—
|
with or without coating on the surface,
|
—
|
particle size represented by d50 value of 15 μm (± 4),
|
—
|
specific surface area (measured by BET) less than 3,5 m2/g,
|
—
|
tap density: 1,3 g/m3 (± 0,5),
|
—
|
specific Discharge Capacity of 348 mAh/g (± 13),
|
—
|
initial efficiency above 93,0 %
|
|
1.8 %
|
-
|
31.12.2021
|
0.4459
|
ex 3919 90 80
|
83
|
Reflector or diffuser sheets, in rolls,
—
|
for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or
|
—
|
for equal transmission and distribution of light, intended for LCD modules
|
|
0 %
|
-
|
31.12.2022
|
0.5139
|
ex 3920 10 89
|
55
|
Ethylene vinyl acetate (EVA) film:
—
|
with a raised relief surface with embossed undulations,
|
—
|
not laminated,
|
—
|
not cross-linked, and
|
—
|
with a thickness of more than 0,3 mm
|
|
0 %
|
-
|
31.12.2021
|
0.5167
|
ex 3920 20 29
|
94
|
Mono-axial oriented, co-extruded film:
—
|
consisting of 3 to 5 layers,
|
—
|
each layer mainly consisting of polypropylene and/or polyethylene,
|
—
|
each layer containing not more than 10 % by weight of other polymers,
|
—
|
whether or not containing titanium dioxide in the core layer,
|
—
|
of an overall thickness of not more than 75 μm
|
|
0 %
|
-
|
31.12.2022
|
0.2546
|
ex 6903 90 90
|
40
|
Silicon carbide reactor tubes and holders having a maximum service temperature of 1370 °C or more
|
0 %
|
-
|
31.12.2023
|
0.8028
|
ex 6909 19 00
|
40
|
Ceramic-carbon absorption or adsorption cartridges of fuel motor vehicle systems, with the following characteristics:
—
|
extruded fired ceramic bound multicellular cylindrical structure,
|
—
|
5 % or more by weight but not more than 70 % by weight of activated carbon,
|
—
|
30 % or more by weight but no more than 90 % by weight of ceramic binder,
|
—
|
with a diameter of 29 mm or more but no more than 41 mm,
|
—
|
a length of not more than 150 mm,
|
—
|
fired at temperature of 800 °C or more
|
|
0 %
|
p/st
|
31.12.2025
|
0.6680
|
ex 7326 90 98
ex 7907 00 00
|
40
10
|
Iron, steel and/or zinc alloy weights:
—
|
with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm,
|
—
|
whether or not with parts of other material,
|
—
|
whether or not with parts of other metals,
|
—
|
whether or not surface treated,
|
—
|
whether or not printed,
|
of a kind used for the production of remote controls
|
0 %
|
-
|
31.12.2025
|
0.4050
|
ex 7607 11 90
ex 7607 11 90
|
65
67
|
Plain aluminium foil with the following parameters:
—
|
an aluminium content of 99,98 % or more,
|
—
|
a thickness of 0,070 mm or more but not more than 0,125 mm,
|
—
|
with a cubic texture,
|
of a kind used for high voltage etching
|
3.7 %
|
-
|
31.12.2021
|
0.7966
|
ex 8104 19 00
|
10
|
Unwrought magnesium containing 90 % or more but not more than 99,7 % by weight of magnesium
|
0 %
|
-
|
31.12.2025
|
0.5097
|
ex 8104 30 00
|
35
|
Magnesium powder:
—
|
of purity by weight of more than 99,5 %, and
|
—
|
with a particle size of not more than 0,8 mm
|
|
0 %
|
-
|
31.12.2025
|
0.4133
|
ex 8418 99 10
ex 8418 99 10
|
71
79
|
Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles
|
0 %
|
p/st
|
31.12.2021
|
0.6858
|
ex 8501 10 99
|
64
|
DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:
—
|
with Ingress Protection (IP) standard of IP69,
|
—
|
with a rotor speed of not more than 6 500 rpm when not loaded,
|
—
|
with a rated voltage of 12,0 V (± 0,1),
|
—
|
of a specified temperature range of – 40 °C or more but not more than + 165 °C,
|
—
|
with or without a connecting pinion,
|
—
|
with or without an engine connector,
|
—
|
with or without a flange,
|
—
|
with a diameter of not more than 40 mm (not including the flange),
|
—
|
with an overall height of not more than 90 mm (from the base to the pinion)
|
|
0 %
|
-
|
31.12.2021
|
0.6809
|
ex 8501 31 00
ex 8501 32 00
|
43
55
|
Automotive-ready, brushless and permanently excited direct current motor with:
—
|
a specified speed of not more than 4 100 rpm,
|
—
|
a minimum output of 400 W, but not more than 1,3 kW (at 12V),
|
—
|
a flange diameter of 85 mm or more but not more than 200 mm,
|
—
|
a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,
|
—
|
a housing length of not more than 265 mm, measured from the flange to the outer ending,
|
—
|
a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),
|
—
|
a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and
|
—
|
surface magnets,
|
—
|
whether or not with electronic power steering controller,
|
—
|
whether or not with pulley,
|
—
|
whether or not with rotor position sensor
|
|
0 %
|
-
|
31.12.2025
|
0.7641
|
ex 8507 60 00
|
58
|
Prismatic lithium-ion electric accumulator with:
—
|
a width of 120,0 mm or more but not more than 305,0 mm,
|
—
|
a thickness of 12,0 mm or more but not more than 67,0 mm,
|
—
|
a height of 72,0 mm or more but not more than 126,0 mm,
|
—
|
a nominal voltage of 3,6 V or more but not more than 3,75 V, and
|
—
|
a nominal capacity of 6,9 Ah or more not more than 265 Ah,
|
for use in the manufacture of rechargeable electric vehicle batteries
|
1.3 %
|
-
|
31.12.2021
|
0.5356
|
ex 8507 60 00
|
75
|
Rectangular lithium-ion-accumulator with:
—
|
a metal casing,
|
—
|
a length of 147,85 mm or more but not more than 173,15 mm,
|
—
|
a width of 17,4 mm or more but not more than 21,1 mm,
|
—
|
a height of 90,85 mm or more but not more than 95,15 mm,
|
—
|
a nominal voltage of 3,3 V or more but not more than 3,65 V, and
|
—
|
a nominal capacity of 17,5 Ah or more
|
|
1.3 %
|
-
|
31.12.2021
|
0.7856
|
ex 8708 40 20
ex 8708 40 50
|
70
60
|
Manual gearbox in cast aluminium housing for transverse installation with:
—
|
a width of not more than 480 mm,
|
—
|
a height of not more than 400 mm,
|
—
|
a length of not more than 550 mm,
|
—
|
five or six gears,
|
—
|
a differential gear,
|
—
|
an engine torque of 400 Nm or less,
|
for use in the manufacture of motor vehicles of Heading 8703
|
0 %
|
-
|
31.12.2024
|
0.6583
|
ex 8708 99 10
ex 8708 99 97
|
60
50
|
Aluminium engine bracket, with dimensions of:
—
|
height of more than 10 mm but not more than 200 mm,
|
—
|
width of more than 10 mm but not more than 250 mm,
|
—
|
length of more than 10 mm but not more than 200 mm,
|
equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:
—
|
internal porosity not more than 1 mm,
|
—
|
outer porosity not more than 2 mm,
|
—
|
rockwell hardness HRB 10 or more,
|
of a kind used in the production of suspensions systems for engines in motor vehicles
|
0 %
|
p/st
|
31.12.2024
|
0.7101
|
ex 9001 10 90
|
40
|
Fibre optic plates:
—
|
uncoated and unpainted,
|
—
|
of a length of 30 mm or more, but not more than 234,5 mm,
|
—
|
of a width of 7 mm or more, but not more than 28 mm, and
|
—
|
of a height of 0,5 mm or more, but not more than 3 mm,
|
of a kind used in dental x-ray systems
|
0 %
|
-
|
31.12.2021
|
0.7590
|
ex 9002 11 00
|
18
|
Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:
—
|
a horizontal field of view range to a maximum of 120 deg,
|
—
|
a diagonal field of view range to a maximum of 105 deg,
|
—
|
a focal length to a maximum of 7,50 mm,
|
—
|
a relative aperture of a maximum of F/2,90,
|
—
|
a maximum diameter of 22 mm
|
|
0 %
|
-
|
31.12.2023
|
Serial Number
|
CN code
|
TARIC
|
Description
|
Rate of autonomous duty
|
Supplementary Unit
|
Date foreseen for mandatory review
|
‘0.8144
|
ex 2710 12 25
|
20
|
Mixture of C6 aliphatic hydrocarbons (CAS RN 92112-69-1), containing by weight 60 % or more but not more than 80 % of n-hexane (CAS RN 110-54-3), with:
—
|
a specific gravity of 0,666 or more but not more than 0,686,
|
—
|
a total of carbonyl compounds of less than 1 ppm,
|
—
|
a total of acetylenic compounds of less than 2 ppm
|
|
0 %
|
-
|
31.12.2025
|
0.8076
|
ex 2903 99 80
|
45
|
1-Bromo-4-(trans-4-propylcyclohexyl)benzene (CAS RN 86579-53-5) with a purity by weight of 95 % or more
|
0 %
|
-
|
31.12.2025
|
0.8101
|
ex 2903 99 80
|
55
|
1-Bromo-4-(trans-4-ethylcyclohexyl)benzene (CAS RN 91538-82-8) with a purity by weight of 95 % or more
|
0 %
|
-
|
31.12.2025
|
0.8042
|
ex 2910 90 00
|
40
|
[(2R)-Oxiran-2-yl]methyl 3-nitrobenzenesulphonate (CAS RN 115314-17-5) with a purity by weight of 97 % or more
|
0 %
|
-
|
31.12.2025
|
0.8073
|
ex 2912 19 00
|
20
|
Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8147
|
2912 42 00
|
|
Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde)
|
0 %
|
-
|
31.12.2025
|
0.8058
|
ex 2914 29 00
|
45
|
4-Propylcyclohexan-1-one (CAS RN 40649-36-3) with a purity by weight of 95 % or more
|
0 %
|
-
|
31.12.2025
|
0.8146
|
ex 2915 90 70
|
23
|
Tin bis(2-ethylhexanoate) (CAS RN 301-10-0) with a purity by weight of 97 % or more
|
0 %
|
-
|
31.12.2025
|
0.8057
|
ex 2916 20 00
|
45
|
Cyclopentanecarboxylic acid (CAS RN 3400-45-1) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8039
|
ex 2916 39 90
|
78
|
(2,5-dibromophenyl)acetic acid (CAS RN 203314-28-7) with a purity by weight of 98,0 % or more
|
0 %
|
-
|
31.12.2025
|
0.8044
|
ex 2918 19 98
|
60
|
(R)-tert-butyl 2'-(1-hydroxyethyl)-3-methyl-[1,1'-biphenyl]-4-carboxylate (CAS RN 1246560-92-8) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8075
|
ex 2918 30 00
|
45
|
Methyl 5-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene-2-carboxylate (CAS RN 150192-89-5) with a purity by weight of 96 % or more
|
0 %
|
-
|
31.12.2025
|
0.8066
|
ex 2918 99 90
|
48
|
2-Bromo-5-methoxybenzoic acid (CAS RN 22921-68-2) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8045
|
ex 2921 29 00
|
15
|
(2S)-propane-1,2-diamine dihydrochloride (CAS RN 19777-66-3) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8067
|
ex 2921 29 00
|
25
|
N,N'-Diallylpropane-1,3-diamine dihydrochloride (CAS RN 205041-15-2) with a purity by weight or 96 % or more
|
0 %
|
-
|
31.12.2025
|
0.8059
|
ex 2921 49 00
|
65
|
Bis-(9,9-dimethylfluoren-2-yl)amine (CAS RN 500717-23-7) with a purity by weight of 95 % or more
|
0 %
|
-
|
31.12.2025
|
0.8027
|
ex 2924 19 00
|
28
|
(2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (2:1) (CAS RN 54940-97-5) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8030
|
ex 2924 19 00
|
33
|
(2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (1:1) (CAS RN 70796-17-7) with a purity by weight of 98,5 % or more
|
0 %
|
-
|
31.12.2025
|
0.8041
|
ex 2924 19 00
|
38
|
Diethyl acetamidomalonate (CAS RN 1068-90-2) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8049
|
ex 2924 19 00
|
43
|
N6-(tert-butoxycarbonyl)-L-lysine methyl ester hydrochloride (CAS RN 2389-48-2) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8043
|
ex 2924 29 70
|
58
|
2-chloro-N-[1-(4-chloro-3-fluorophenyl)-2-methylpropan-2-yl]acetamide (CAS RN 787585-35-7) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8060
|
ex 2924 29 70
|
78
|
5-amino-3-(4-chlorophenyl)-5-oxopentanoic acid (CAS RN 1141-23-7) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8033
|
ex 2925 29 00
|
60
|
Formamidine acetate (CAS RN 3473-63-0) with a purity by weight of 99 % or more
|
0 %
|
-
|
31.12.2025
|
0.8040
|
ex 2925 29 00
|
70
|
Bromomethylidene(dimethyl)azanium bromide (CAS RN 24774-61-6) with a purity by weight of 97 % or more
|
0 %
|
-
|
31.12.2025
|
0.8061
|
ex 2928 00 90
|
38
|
Aqueous solution of methoxyammonium chloride (CAS-RN 593-56-6), containing by weight:
—
|
30 % or more but not more than 40 % of methoxyammonium chloride
|
—
|
not more than 4 % of hydrochloric acid
|
|
0 %
|
-
|
31.12.2025
|
0.8093
|
ex 2928 00 90
|
43
|
2-(3-methoxy-3-oxopropyl)-1,1,1-trimethylhydrazinium bromide (CAS RN 106966-25-0) with a purity by weight of 99 % or more
|
0 %
|
-
|
31.12.2025
|
0.8036
|
ex 2930 90 98
|
11
|
Benzyl (2S)-2-amino-3-[3-(methanesulphonylphenyl)]propanoate hydrochloride (CAS RN 1194550-59-8) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8047
|
ex 2930 90 98
|
14
|
(E)-N'-(2-Cyano-4-(3-(1-hydroxy-2-methylpropan-2-yl)thioureido)phenyl)-N,N-dimethyl-formimidamide (CAS RN 1429755-57-6) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8050
|
ex 2930 90 98
|
19
|
4-Amino-5-(ethanesulphonyl)-2-methoxybenzoic acid (CAS RN 71675-87-1) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8069
|
ex 2930 90 98
|
28
|
Mesotrione (ISO) (CAS RN 104206-82-8) in form of wet cake or wet paste, with
—
|
a purity of 74 % or more but not more than 87 % by weight, and
|
—
|
a maximum water content of 23 % by weight
|
|
0 %
|
-
|
31.12.2025
|
0.8051
|
ex 2931 90 00
|
23
|
Ixazomib citrate (INNM) (CAS RN 1239908-20-3) with a purity by weight of 95 % or more
|
0 %
|
-
|
31.12.2025
|
0.8063
|
ex 2931 90 00
|
28
|
Triethoxy(3-isocyanatopropyl)silane (CAS RN 24801-88-5) with a purity by weight of 96 % or more
|
0 %
|
-
|
31.12.2025
|
0.8035
|
ex 2932 99 00
|
38
|
1-Benzofuran-6-carboxylic acid (CAS RN 77095-51-3) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8046
|
ex 2933 19 90
|
48
|
1-(3-iodo-1-isopropyl-1H-pyrazol-4-yl)ethanone (CAS RN 1269440-49-4) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8068
|
ex 2933 39 99
|
30
|
4-amino-3-(4-phenoxyphenyl)-1-[(3R)-piperidin-3-yl]-1,3-dihydro-2H-imidazo[4,5-c]pyridin-2-one (CAS RN 1971921-35-3) mono oxalate with a purity by weight of the free base of 70 % or more
|
0 %
|
-
|
31.12.2025
|
0.8072
|
ex 2933 39 99
|
75
|
Clodinafop-propargyl (ISO) (CAS RN 105512-06-9) with a purity by weight of 90 % or more
|
0 %
|
-
|
31.12.2025
|
0.8074
|
ex 2933 39 99
|
80
|
Tert-Butyl (3R)-3-(4-amino-2-oxo-2,3-dihydro-1H-imidazo[4, 5-c]pyridin-1-yl)piperidine-1-carboxylate (CAS RN 1971921-33-1) with a purity by weight of 95 % or more
|
0 %
|
-
|
31.12.2025
|
0.8096
|
ex 2933 39 99
|
89
|
1-Benzyl-4-phenylpiperidine-4-carbonitrile monohydrochloride (CAS RN 71258-18-9) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8037
|
ex 2933 49 90
|
55
|
2-(tert-butoxycarbonyl)-5,7-dichloro-1,2,3,4-tetrahydroisoquinoline-6-carboxylic acid (CAS RN 851784-82-2) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8056
|
ex 2933 59 95
|
42
|
2-Chloropyrimidine (CAS RN 1722-12-9) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8038
|
ex 2933 79 00
|
45
|
1-phenyl-3H-indol-2-one (CAS RN 3335-98-6) with a purity by weight of 99 % or more
|
0 %
|
-
|
31.12.2025
|
0.8089
|
ex 2933 99 80
|
25
|
6-(4-Benzylamino-3-nitrophenyl)-5-methyl-4,5-dihydro-2H-pyridazin-3-one (CAS RN 77469-62-6) with a purity by weight of 95 % or more
|
0 %
|
-
|
31.12.2025
|
0.8032
|
ex 2933 99 80
|
65
|
1,2,4-Triazole (CAS RN 288-88-0) with a purity by weight of 99 % or more
|
0 %
|
-
|
31.12.2025
|
0.8053
|
ex 2933 99 80
|
69
|
5-Formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (CAS RN 253870-02-9) with a purity by weight of 96 % or more
|
0 %
|
-
|
31.12.2025
|
0.8054
|
ex 2933 99 80
|
76
|
2-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8064
|
ex 2933 99 80
|
77
|
9-[1,1′-Biphenyl]-3-yl-9′-[1,1′-biphenyl]-4-yl-3,3′-bi-9H-carbazole (CAS RN 1643479-47-3) with a purity by weight of 95 % or more
|
0 %
|
-
|
31.12.2025
|
0.8094
|
ex 2934 99 90
|
40
|
2,3-Pyrazinedicarboxylic anhydride (CAS RN 4744-50-7) with a purity by weight of 95 % or more
|
0 %
|
-
|
31.12.2025
|
0.8031
|
ex 2934 99 90
|
55
|
Uridine (CAS RN 58-96-8) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8048
|
ex 2934 99 90
|
81
|
1-(4-aminophenyl)-5-(morpholin-4-yl)-2,3-dihydropyridin-6-one (CAS RN 1267610-26-3) with a purity by weight of 98 % or more
|
0 %
|
-
|
31.12.2025
|
0.8055
|
ex 2935 90 90
|
80
|
4-Chloro-3-sulphamoylbenzoic acid (CAS RN 1205-30-7) with a purity by weight of 97 % or more
|
0 %
|
-
|
31.12.2025
|
0.8137
|
ex 3208 90 19
ex 3911 90 99
|
13
63
|
Mixture, containing by weight:
—
|
30 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0),
|
—
|
10 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3),
|
—
|
40 % or more, but not more than 55 % of ethanol (CAS RN 64-17-5),
|
—
|
1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3)
|
|
0 %
|
-
|
31.12.2025
|
0.8083
|
ex 3824 99 92
|
92
|
Solution consisting of:
—
|
50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and
|
—
|
50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (CAS RN 64742-89-8)
|
|
0 %
|
-
|
31.12.2025
|
0.8121
|
ex 3824 99 92
|
93
|
Solution of not more than 15 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3) in a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and ethyl methyl carbonate (CAS RN 623-53-0), contains organic carbonate derivatives as additives
|
3.2 %
|
-
|
31.12.2021
|
0.8062
|
ex 3824 99 93
|
51
|
Tris(hydroxymethyl)phosphine oxide (CAS RN 1067-12-5) with a purity by weight of 85 % or more
|
0 %
|
-
|
31.12.2025
|
0.8122
|
ex 3824 99 96
|
68
|
Lithium nickel dioxide (CAS RN 12325-84-7) containing by weight:
—
|
less than 5 % of lithium hydroxide (CAS RN 1310-65-2),
|
—
|
less than 5 % of lithium carbonate (CAS RN 554-13-2), and
|
—
|
less than 15 % of nickel oxide (CAS RN 11099-02-8)
|
|
3.2 %
|
-
|
31.12.2021
|
0.8125
|
ex 3902 30 00
|
20
|
Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene
|
0 %
|
-
|
31.12.2025
|
0.8126
|
ex 3905 91 00
|
50
|
Aqueous solution consisting by weight of:
—
|
10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3),
|
—
|
not more than 1 % preservatives
|
|
0 %
|
-
|
31.12.2025
|
0.8145
|
ex 3905 91 00
|
60
|
Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight:
—
|
27 % or more but not more than 33 % of copolymer,
|
—
|
not more than 1,5 % of ethanol (CAS RN 64-17-5),
|
—
|
not more than 1 % of preservatives
|
|
0 %
|
-
|
31.12.2025
|
0.8138
|
ex 3905 91 00
|
70
|
Aqueous solution, containing by weight:
—
|
25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2),
|
—
|
10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6)
|
|
0 %
|
-
|
31.12.2025
|
0.8139
|
ex 3905 91 00
|
80
|
Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0)
|
0 %
|
-
|
31.12.2025
|
0.8097
|
ex 3910 00 00
|
75
|
Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder
|
0 %
|
-
|
31.12.2025
|
0.8116
|
ex 3917 31 00
ex 3917 32 00
ex 3917 39 00
|
30
20
20
|
Tubings:
—
|
with an outer diameter of 0,33 mm or more but not more than 3,3 mm,
|
—
|
with an inner diameter of 0,01 mm or more but not more than 2,1 mm,
|
—
|
suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa,
|
—
|
suitable for all solutions used in chromatography,
|
—
|
whether or not with fused silica,
|
—
|
whether or not covered with PEEK,
|
for use in chromatographic system
|
0 %
|
-
|
31.12.2021
|
0.8117
|
ex 3917 40 00
|
20
|
Plastic fittings (kit of nuts and ferrules or nuts) and connectors:
—
|
threaded,
|
—
|
supported with or without a stainless steel ring,
|
—
|
suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,
|
for tubings with:
—
|
outer diameter of 0,33 mm or more but not more than 3,3 mm,
|
—
|
suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,
|
—
|
suitable for all solutions used in chromatography,
|
for use in the production of chromatographic systems
|
0 %
|
-
|
31.12.2021
|
0.8109
|
ex 3919 10 80
|
48
|
Plastic strips of polypropylene,
—
|
self-adhesive,
|
—
|
unilaterally adhesive-coated with an Acrylic Polymer,
|
—
|
in rolls with a width of 20 cm or less,
|
—
|
with a thickness including adhesion layer of 0,03 mm or less,
|
for use in the manufacturing of lithium-ion electric rechargeable batteries
|
3.2 %
|
-
|
31.12.2021
|
0.8149
|
ex 3920 10 89
|
45
|
Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels
|
0 %
|
-
|
31.12.2022
|
0.8118
|
ex 3926 90 97
|
58
|
Plastic ferrules and/or plugs:
—
|
supported with or without a stainless steel ring,
|
—
|
suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,
|
for tubings with:
—
|
outer diameter of 0,33 mm or more but not more than 3,3 mm,
|
—
|
suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,
|
—
|
suitable for all solutions used in chromatography,
|
for use in the production of chromatographic systems
|
0 %
|
-
|
31.12.2021
|
0.8108
|
ex 5403 31 00
|
10
|
Continuous viscose rayon filament yarn of 105 dtex or more but not more than 117 dtex, and consisting of 36 monofilaments or more but not more than 40 monofilaments
|
0 %
|
-
|
31.12.2025
|
0.8105
|
ex 8108 90 30
|
55
|
Wires of an alloy of titanium:
—
|
with a niobium content by weight of 42 % or more but not more than 47 %,
|
—
|
with a diameter of not more than 6 mm,
|
—
|
complying with standard AMS 4982,
|
for use in the production of aerospace fasteners
|
0 %
|
-
|
31.12.2025
|
0.8148
|
ex 8412 90 80
|
20
|
Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with:
—
|
a length of 3,5 m or more but not more than 4,3 m,
|
—
|
a width of 2 m or more but not more than 3,5 m,
|
—
|
a height of 1 m or more but not more than 1,3 m,
|
—
|
a weight of 11 tons or more but not more than 20 tons,
|
—
|
mounting bores for yaw drive,
|
—
|
mounting flange for gearbox support,
|
—
|
drivetrain mount,
|
—
|
different screw sockets
|
|
0 %
|
p/st
|
31.12.2025
|
0.8079
|
ex 8412 90 80
|
30
|
Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with:
—
|
a diameter of 2 m or more, but not more than 5 m,
|
—
|
a weight of 2 tons or more but not more than 7 tons
|
|
0 %
|
p/st
|
31.12.2025
|
0.8111
|
ex 8414 30 20
|
20
|
Hermetic reciprocating refrigeration compressor, for isobutane:
—
|
with a 3-phase permanent magnet brushless motor,
|
—
|
having left side suction connection and Power Factor Correction (PFC) inverter,
|
—
|
with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions
|
|
0 %
|
-
|
31.12.2025
|
0.8112
|
ex 8414 30 20
|
30
|
Hermetic reciprocating refrigeration compressor for isobutane as refrigerant:
—
|
with a 3-phase permanent magnet brushless motor,
|
—
|
having left side suction connection and Power Factor Correction (PFC) inverter feasible to work from 1 300 rpm up to 4 500 rpm,
|
—
|
with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions
|
|
0 %
|
-
|
31.12.2025
|
0.8134
|
ex 8414 30 20
|
40
|
Hermetic reciprocating compressor, for isobutane as refrigerant with:
—
|
a Resistance Start Capacitor Run (RSCR) single phase motor,
|
—
|
a general coefficient of performance factor not lower than 1,93 at ASHRAE conditions,
|
—
|
a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions
|
|
0 %
|
-
|
31.12.2025
|
0.8135
|
ex 8414 30 20
|
50
|
Hermetic reciprocating compressor, for isobutane as refrigerant with:
—
|
a Resistance Start Capacitor Run (RSCR) single phase motor,
|
—
|
a general coefficient of performance factor not higher than 1,5 at ASHRAE conditions,
|
—
|
a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions
|
|
0 %
|
-
|
31.12.2025
|
0.8133
|
ex 8414 80 73
|
40
|
Hermetic heat pump compressor, for R134A or R450A as refrigerant:
—
|
with the Single Phase Induction Motor PSC (Permanent Split Capacitor),
|
—
|
having bottom side suction connection and top side discharge connection,
|
—
|
8,1 cm3 or 8,2 cm3 displacement,
|
—
|
running at 3000 rpm,
|
—
|
with a cooling capacity of 920 W or higher, but not higher than 970 W in ASHRAE conditions
|
|
0 %
|
-
|
31.12.2025
|
0.8123
|
ex 8479 89 97
|
28
|
Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:
—
|
electronic brake assistants,
|
—
|
hydraulic unit driven by brushless electric motor,
|
—
|
brake fluid reservoir,
|
for use in the manufacture of plug-in hybrid passenger cars
|
0 %
|
-
|
31.12.2025
|
0.7962
|
ex 8479 90 70
|
50
|
Rotor part of the mechanical unit ensuring the movement of the camshaft compared to the crankshaft:
—
|
with 4 blades that end in grooves,
|
—
|
made of steel alloy with sintering process
|
|
0 %
|
-
|
31.12.2025
|
0.8098
|
ex 8482 50 00
|
20
|
Axial roller bearing made of steel:
—
|
the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98,
|
—
|
the rollers are made of anti-friction steel according to ASTM 295-94,
|
—
|
with an external diameter of 63 mm or more but not more than 66 mm,
|
—
|
with an internal diameter of 44 mm or more but not more than 46 mm,
|
—
|
with a weight of 23 g or more but not more than 27 g,
|
—
|
with 36 rollers or more but not more than 38 rollers
|
|
0 %
|
p/st
|
31.12.2025
|
0.8088
|
ex 8482 99 00
|
40
|
Inner and outer rings made of steel, not grinded, with an internal raceway, with diameters of:
—
|
14,66 mm or more but not more than 76,2 mm for the inner ring, and
|
—
|
26 mm or more but not more than 100 mm for the outer ring
|
|
0 %
|
-
|
31.12.2025
|
0.8100
|
ex 8483 50 80
|
20
|
Pulley blocks of non-cast steel:
—
|
made of structural carbon steel complying with standard JIS G4051,
|
—
|
with an external diameter of 114 mm or more but not more than 118 mm,
|
—
|
with an internal diameter of 33 mm or more but not more than 37 mm,
|
—
|
with a width of 29 mm or more but not more than 33 mm,
|
—
|
with a weight of 0,6 kg or more but not more than 0,9 kg,
|
—
|
with 6 trapezoidal grooves
|
|
0 %
|
p/st
|
31.12.2025
|
0.8130
|
ex 8501 62 00
|
40
|
AC, 3-phase generator, with:
—
|
a continuous power of 147 kVA or more but not more than 222 kVA,
|
—
|
a continuous torque of 650 Nm or more but not more than 900 Nm,
|
—
|
a maximum working speed of 2700 revolutions per minute (rpm),
|
—
|
a liquid cooled system,
|
—
|
a length of 100 mm or more but not more than 200 mm,
|
—
|
a width of 550 mm or more but not more than 650 mm,
|
—
|
a height of 550 mm or more but not more than 650 mm,
|
—
|
weighing of not more than 150 kg
|
|
0 %
|
-
|
31.12.2025
|
0.8095
|
ex 8505 90 90
|
20
|
Electromagnetic clutch coil in a cylindrical metal housing:
—
|
the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE,
|
—
|
the coil is made of copper wire,
|
—
|
with a weight of 0,4 kg or more but not more than 0,7 kg,
|
—
|
with a width of 22 mm or more but not more than 25 mm,
|
—
|
with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm,
|
—
|
with an external diameter of 88 mm or more but not more than 96 mm,
|
—
|
without plunger,
|
—
|
with one connector
|
|
0 %
|
p/st
|
31.12.2025
|
0.8115
|
ex 8507 60 00
|
48
|
Integrated battery system in a metal case with holders, consisting of:
—
|
a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh,
|
—
|
Battery Management System,
|
—
|
a power relay,
|
—
|
a cooling system,
|
—
|
four connectors,
|
for use in the manufacture of Mild-hybrid (mHEV) motor vehicles
|
1.3 %
|
-
|
31.12.2021
|
0.8140
|
ex 8529 90 92
|
73
|
CMOS-Image sensor
—
|
with a micro lens on every pixel (micro lens coverage at least 99 % of all pixel),
|
—
|
to capture infra-red light reflected from objects,
|
in order to capture depth images in the cameras built for distance measurements (Time-of-Flight)
|
0 %
|
-
|
31.12.2025
|
0.8085
|
ex 8537 10 91
|
45
|
Main hybrid system controller, diagnosing and controlling the elements of the hybrid propulsion system, with:
—
|
a programmable memory,
|
—
|
a microprocessor,
|
—
|
at least one composite connector,
|
—
|
a voltage of 24 V,
|
—
|
with a length of 350 mm or more but not more than 400 mm,
|
—
|
with a width of 200 mm or more but not more than 250 mm,
|
—
|
with a height of 80 mm or more but not more than 120 mm,
|
—
|
in a metal housing
|
|
0 %
|
-
|
31.12.2025
|
0.8132
|
ex 8537 10 98
|
80
|
Propulsion Control System with at least:
—
|
a DC/AC inverter,
|
—
|
a power of 190 kW or more but not more than 220 kW,
|
—
|
a high voltage circuits with AC and DC interfaces for connecting a traction motor, generator and energy storage system,
|
—
|
an integral control of all drive motor and generator traction system functions,
|
—
|
a CAN communications interface with System Control Unit,
|
—
|
a liquid cooled system,
|
—
|
a length of 300 mm or more but not more than 950 mm,
|
—
|
a width of 350 mm or more but not more than 600 mm,
|
—
|
a height of 200 mm or more but not more than 350 mm,
|
—
|
a weight of 40 kg or more but not more than 90 kg
|
|
0 %
|
p/st
|
31.12.2025
|
0.8124
|
ex 8537 10 98
|
88
|
Control panel for car radio and/or navigation control with:
—
|
electronic passive components,
|
—
|
at least two switches,
|
—
|
LEDs,
|
—
|
at least one connector,
|
—
|
whether or not warning triangle switch,
|
—
|
for a voltage not exceeding 16 V,
|
for use in the manufacture of goods of Chapter 87
|
0 %
|
-
|
31.12.2025
|
0.8127
|
ex 8708 99 97
|
28
|
A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames:
—
|
cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,
|
—
|
with an operating pressure of not less than 35 MPa,
|
—
|
with a durability declared by the manufacturer of not less than 20 years,
|
—
|
with a cylinder capacity of 180 liters or more but not more than 375 liters,
|
—
|
equipped with a set of solenoid, manual and safety PRD valves,
|
—
|
with a total width of 1 800 mm or more but not more than 2 300 mm,
|
—
|
with a total height of 400 mm or more but not more than 500 mm,
|
—
|
with a total length of 1 200 mm or more but not more than 3 600 mm
|
|
0 %
|
-
|
31.12.2025
|
0.8128
|
ex 8708 99 97
|
38
|
A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames:
—
|
made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,
|
—
|
with an operating pressure of not less than 20 MPa,
|
—
|
with a shelf life declared by the manufacturer of not less than 20 years,
|
—
|
with a cylinder capacity of 315 liters or more but not more than 375 liters,
|
—
|
equipped with a set of solenoid, manual and safety PRD valves,
|
—
|
with a total width of 2 200 mm or more but not more than 2 300 mm,
|
—
|
with a total height of 450 mm or more but not more than 460 mm,
|
—
|
with a total length of 3500 mm or more but not more than 3 600 mm
|
|
0 %
|
-
|
31.12.2025’
|