EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 32009L0108
Commission Directive 2009/108/EC of 17 August 2009 amending, for the purposes of adapting it to technical progress, Directive 97/24/EC of the European Parliament and of the Council on certain components and characteristics of two or three-wheel motor vehicles (Text with EEA relevance)
Commission Directive 2009/108/EC of 17 August 2009 amending, for the purposes of adapting it to technical progress, Directive 97/24/EC of the European Parliament and of the Council on certain components and characteristics of two or three-wheel motor vehicles (Text with EEA relevance)
Commission Directive 2009/108/EC of 17 August 2009 amending, for the purposes of adapting it to technical progress, Directive 97/24/EC of the European Parliament and of the Council on certain components and characteristics of two or three-wheel motor vehicles (Text with EEA relevance)
OJ L 213, 18.8.2009, p. 10–25
(BG, ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV) This document has been published in a special edition(s)
(HR)
No longer in force, Date of end of validity: 31/12/2015; Repealed by 32013R0168
18.8.2009 |
EN |
Official Journal of the European Union |
L 213/10 |
COMMISSION DIRECTIVE 2009/108/EC
of 17 August 2009
amending, for the purposes of adapting it to technical progress, Directive 97/24/EC of the European Parliament and of the Council on certain components and characteristics of two or three-wheel motor vehicles
(Text with EEA relevance)
THE COMMISSION OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Community,
Having regard to Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two and three-wheel motor vehicles and repealing Council Directive 92/61/EEC (1), and in particular Article 17 thereof,
Whereas:
(1) |
Directive 97/24/EC of the European Parliament and of the Council of 17 June 1997 on certain components and characteristics of two or three-wheel motor vehicles (2) is one of the separate Directives for the purposes of the two and three-wheel motor vehicles EC type-approval procedure laid down by Directive 2002/24/EC. |
(2) |
In order to take into account the specific behaviour of hybrid vehicles, the type-approval test procedure used for measuring gaseous pollutants from two and three-wheel vehicles should be adapted. For this purpose, it is appropriate to adopt a procedure similar to the one used in UNECE Regulation No 83 on Emission of pollutants according to engine fuel requirements. |
(3) |
To ensure that hybrid vehicles comply with the noise limits set out in Directive 97/24/EC in all their running modes it is also necessary to adapt the type-approval test procedure used for noise measurement set out in Directive 97/24/EC. |
(4) |
Directive 97/24/EC should therefore be amended accordingly. |
(5) |
The measures provided for this Directive are in accordance with the opinion of the Committee for Adaptation to Technical Progress, |
HAS ADOPTED THIS DIRECTIVE:
Article 1
Directive 97/24/EC is amended as follows:
1. |
Annex II of Chapter 5 of Directive 97/24/EC is amended in accordance with Annex I to this Directive; |
2. |
Annex III of Chapter 9 of Directive 97/24/EC is amended in accordance with Annex II to this Directive; |
3. |
Annex IV of Chapter 9 of Directive 97/24/EC is amended in accordance with Annex III to this Directive. |
Article 2
1. With effect from 1 May 2010, Member States shall not, on grounds relating to measures to counter air pollution or noise emissions, refuse to grant EC type-approval or prohibit the registration, sale or entry into service of two or three-wheel vehicles which comply with Directive 97/24/EC as amended by this Directive.
2. With effect from 1 May 2010, Member States shall refuse, on grounds relating to measures to counter air pollution or noise emissions, to grant EC type-approval to any new type of two or three-wheel motor vehicle which does not comply with Directive 97/24/EC as amended by this Directive.
Article 3
1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 30 April 2010 at the latest. They shall forthwith communicate to the Commission the text of those provisions.
When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.
2. Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.
Article 4
This Directive shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
Article 5
This Directive is addressed to the Member States.
Done at Brussels, 17 August 2009.
For the Commission
Günter VERHEUGEN
Vice-President
ANNEX I
AMENDMENT TO ANNEX II OF CHAPTER 5 OF DIRECTIVE 97/24/CE
Annex II of Chapter 5 of Directive 97/24/EC is amended as follows:
1. |
The following point 1.10 is added:
|
2. |
The following point 2.2.1.3 is inserted:
|
3. |
The following Appendix 3 is added: ‘Appendix 3 Emissions test procedure for hybrid electric motorcycles, motor tricycles and quadricycles 1. SCOPE This annex lays down the specific provisions regarding type-approval of a hybrid electric vehicle. 2. CATEGORIES OF HYBRID ELECTRIC VEHICLES
3. TYPE I TEST METHODS For the Type I test, hybrid electric motorcycles or motor tricycles shall be tested according to the applicable test procedure (Appendix 1 or Appendix 1a) as prescribed in point 2.2.1.1.5 of Annex II. For each of test condition, the emission test result shall comply with the limits specified in point 2.2.1.1.5 of Annex II. 3.1. Externally chargeable (OVC HEV) without an operating mode switch 3.1.1. Two tests shall be performed under the following conditions:
The profile of the state of charge (SOC) of the electrical energy storage device during different stages of the Type I test is given in Sub-appendix 3. 3.1.2. Condition A 3.1.2.1. The procedure shall start with the discharge while the vehicle driving:
The fuel consuming engine shall be stopped within 10 seconds of it being automatically started. 3.1.2.2. Conditioning of vehicle 3.1.2.2.1. Before testing, the vehicle shall be kept in a room in which the temperature remains relatively constant between 293 and 303 K (20 °C and 30 °C). This conditioning shall be carried out for at least six hours and continue until the engine oil temperature and coolant, if any, are within ± 2 K of the temperature of the room, and the electrical energy storage device is fully charged as a result of the charging referred to in point 3.1.2.2.2. 3.1.2.2.2. During soak, the electrical energy storage device shall be charged using the normal overnight charging procedure as described in point 4.1.2 of Sub-appendix 2. 3.1.2.3. Test procedure 3.1.2.3.1. The vehicle shall be started up by the means provided for normal use to the driver. The first cycle starts on the initiation of the vehicle start-up procedure. 3.1.2.3.2. The test procedures defined in either point 3.1.2.3.2.1 or point 3.1.2.3.2.2 may be used. 3.1.2.3.2.1. Sampling shall begin (BS) before or at the initiation of the vehicle start up procedure and end as defined in the applicable test procedure (Appendix 1 or Appendix 1a) (end of sampling (ES)). 3.1.2.3.2.2. Sampling shall begin (BS) before or at the initiation of the vehicle start up procedure and continue over a number of repeat test cycles. It shall end on conclusion of the final idling period where the electrical energy storage device has reached the minimum state of charge according to the criterion defined below (end of sampling (ES)). The electricity balance Q [Ah], measured using the procedure specified in Sub-appendix 1, is used to determine when the minimum state of charge of the electrical energy storage device has been reached. The minimum state of charge of the electrical energy storage device is considered to have been reached in test cycle N if the electricity balance during test cycle N + 1 is not more than a 3 % discharge, expressed as a percentage of the nominal capacity of the energy storage (in Ah) in its maximum state of charge. At the request of the manufacturer additional test cycles may be run and their results included in the calculations described in points 3.1.2.3.5 and 3.1.2.3.6 provided that the electricity balance for each additional test cycle shows less discharge of the electrical energy storage device than over the previous cycle. In between each of the cycles a hot soak period of up to 10 minutes is allowed. 3.1.2.3.3. The vehicle shall be driven according to the applicable test procedure (Appendix 1 or Appendix 1a). 3.1.2.3.4. The exhaust gases shall be analysed according to the applicable test procedure (Appendix 1 or Appendix 1a). 3.1.2.3.5. The results on the combined cycle for Condition A shall be recorded in m1. In the case of testing according to point 3.1.2.3.2.1, m1 is simply the results in grams of the single cycle run. In the case of testing according to point 3.1.2.3.2.2, m1 is the sum in grams of the results of the N cycles run.
3.1.2.3.6. The average mass emission in g/km of each pollutant for Condition A shall be calculated (M1), M1 = m1/Dtest1 with Dtest1 the total actual driven distances in the test performed under condition A. 3.1.3. Condition B 3.1.3.1. Conditioning of vehicle 3.1.3.1.1. The electrical energy storage device of the vehicle shall be discharged according to point 3.1.2.1. 3.1.3.1.2. Before testing, the vehicle shall be kept in a room in which the temperature remains relatively constant between 293 and 303 K (20 °C and 30 °C). This conditioning shall be carried out for at least six hours and continue until the engine oil temperature and coolant, if any, are within ± 2 K of the temperature of the room. 3.1.3.2. Test procedure 3.1.3.2.1. The vehicle shall be started up by the means provided for normal use to the driver. The first cycle starts on the initiation of the vehicle start-up procedure. 3.1.3.2.2. Sampling shall begin (BS) before or at the initiation of the vehicle start up procedure and end as defined in the applicable test procedure (Appendix 1 or Appendix 1a) (end of sampling (ES)). 3.1.3.2.3. The vehicle shall be driven according to the applicable test procedure (Appendix 1 or Appendix 1a). 3.1.3.2.4. The exhaust gases shall be analysed according to the applicable test procedure (Appendix 1 or Appendix 1a). 3.1.3.2.5. The results on the combined cycle for Condition B shall be recorded in m2. 3.1.3.2.6. The average emission in g/km of each pollutant for Condition B shall be calculated (M2) M2 = m2/Dtest2 with Dtest2 the total actual driven distances in the test performed under condition B. 3.1.4. Test results 3.1.4.1. In the case of testing according to point 3.1.2.3.2.1 the weighted values shall be calculated as below: M = (De · M1 + Dav · M2)/(De + Dav) Where:
3.1.4.2. In the case of testing according to point 3.1.2.3.2.2 the weighted values shall be calculated as below: M = (Dovc · M1 + Dav · M2)/(Dovc + Dav) Where:
3.2. Externally chargeable (OVC) with an operating mode switch 3.2.1. Two tests shall be performed under the following conditions: 3.2.1.1. Condition A: test shall be carried out with a fully charged electrical energy storage device. 3.2.1.2. Condition B: test shall be carried out with an electrical energy storage device in minimum state of charge (maximum discharge of capacity) 3.2.1.3. The operating mode switch shall be positioned according the following table:
3.2.2. Condition A 3.2.2.1. If the pure electric range of the vehicle is higher than one complete cycle, on the request of the manufacturer, the Type I test may be carried out in pure electric mode, after agreement of the technical service. In this case, the value of m1 in point 3.2.2.4.5 is equal to 0. 3.2.2.2. The procedure shall start with the discharge of the electrical energy storage device of the vehicle. 3.2.2.2.1. If the vehicle is equipped with a pure electric mode, the discharge of the electrical energy storage device shall be achieved by driving the vehicle with the switch in pure electric position (on the test track, on a chassis dynamometer, etc.) at a steady speed corresponding to 70 % ± 5 % of the maximum speed indicated by manufacturer. Stopping the discharge occurs in any of the following situations:
3.2.2.2.2. If the vehicle is not equipped with a pure electric mode, the discharge of the electrical energy storage device shall be achieved by driving the vehicle:
The fuel consuming engine shall be stopped within 10 seconds of it being automatically started. 3.2.2.3. Conditioning of vehicle 3.2.2.3.1. Before testing, the vehicle shall be kept in a room in which the temperature remains relatively constant between 293 and 303 K (20 °C and 30 °C). This conditioning shall be carried out for at least six hours and continue until the engine oil temperature and coolant, if any, are within ± 2 K of the temperature of the room, and the electrical energy storage device is fully charged as a result of the charging prescribed in point 3.2.2.3.2. 3.2.2.3.2. During soak, the electrical energy storage device shall be charged, using the normal overnight charging procedure as defined in point 4.1.2 Sub-appendix 2. 3.2.2.4. Test procedure 3.2.2.4.1. The vehicle shall be started up by the means provided for normal use to the driver. The first cycle starts on the initiation of the vehicle start-up procedure. 3.2.2.4.2. The test procedures defined in either point 3.2.2.4.2.1 or point 3.2.2.4.2.2 may be used. 3.2.2.4.2.1. Sampling shall begin (BS) before or at the initiation of the vehicle start up procedure and end as defined in the applicable test procedure (Appendix 1 or Appendix 1a (end of sampling (ES)). 3.2.2.4.2.2. Sampling shall begin (BS) before or at the initiation of the vehicle start up procedure and continue over a number of repeat test cycles. It shall end on conclusion of the final idling period where the electrical energy storage device has reached the minimum state of charge according to the criterion defined below (end of sampling (ES)). The electricity balance Q [Ah], measured using the procedure specified in Sub-appendix 1 to this appendix, is used to determine when the minimum state of charge of the electrical energy storage device has been reached. The minimum state of charge of the electrical energy storage device is considered to have been reached in test cycle N if the electricity balance during test cycle N + 1 is not more than a 3 % discharge, expressed as a percentage of the nominal capacity of the electrical energy storage device (in Ah) in its maximum state of charge. At the manufacturer’s request additional test cycles may be run and their results included in the calculations in points 3.2.2.4.5 and 3.2.2.4.6 provided that the electricity balance for each additional test cycle shows less discharge of the electrical energy storage device than over the previous cycle. In between each of the cycles a hot soak period of up to 10 minutes is allowed. 3.2.2.4.3. The vehicle shall be driven according to the applicable test procedure (Appendix 1 or Appendix 1a). 3.2.2.4.4. The exhaust gases shall be analysed according to the applicable test procedure (Appendix 1 or Appendix 1a). 3.2.2.4.5. The results on the combined cycle for Condition A shall be recorded in m1. In the case of testing according to point 3.2.2.4.2.1, m1 is simply the results in grams of the single cycle run. In the case of testing according to point 3.2.2.4.2.2, m1 is the sum in grams of the results of the N cycles run.
3.2.2.4.6. The average mass emission in g/km of each pollutant for Condition A shall be calculated (M1), M1 = m1/Dtest1 with Dtest1 the total actual driven distances in the test performed under condition A 3.2.3. Condition B 3.2.3.1. In case the vehicle has the possibility to work on different hybrid modes (For instance: sport, economic, urban, extra-urban, etc.), the switch shall be set in such a way that vehicle is running on most fuel consuming hybrid mode (see point 3.2.1.3 above, note 3) 3.2.3.2. Conditioning of vehicle 3.2.3.2.1. The electrical energy storage device of the vehicle shall be discharged according to point 3.2.2.2. 3.2.3.2.2. Before testing, the vehicle shall be kept in a room in which the temperature remains relatively constant between 293 and 303 K (20 °C and 30 °C). This conditioning shall be carried out for at least six hours and continue until the engine oil temperature and coolant, if any, are within ± 2 K of the temperature of the room. 3.2.3.3. Test procedure 3.2.3.3.1. The vehicle shall be started up by the means provided for normal use to the driver. The first cycle starts on the initiation of the vehicle start-up procedure. 3.2.3.3.2. Sampling shall begin (BS) before or at the initiation of the vehicle start up procedure and end as defined in the applicable test procedure (Appendix 1 or Appendix 1a) (end of sampling (ES)). 3.2.3.3.3. The vehicle shall be driven according to the applicable test procedure (Appendix 1 or Appendix 1a). 3.2.3.3.4. The exhaust gases shall be analysed according to the applicable test procedure (Appendix 1 or Appendix 1a). 3.2.3.3.5. The results on the combined cycle for Condition B shall be recorded in m2. 3.2.3.3.6. The average emission in g/km of each pollutant for Condition B shall be calculated (M2) M2 = m2/Dtest2 with Dtest2 the total actual driven distances in the test performed under condition B. 3.2.4. Test results 3.2.4.1. In the case of testing according to point 3.2.2.4.2.1, the weighted values shall be calculated as follows: M = (De · M1 + Dav · M2)/(De + Dav) Where:
3.2.4.2. In the case of testing according to point 3.2.2.4.2.2, the weighted values shall be calculated as follows: M = (Dovc · M1 + Dav · M2)/(Dovc + Dav) Where
3.3. Not externally chargeable (NOVC HEV) without an operating mode switch 3.3.1. Not externally chargeable (NOVC HEV) without an operating mode switch vehicles, in hybrid mode, shall be tested according to Annex I to Chapter 5. 3.3.2. The vehicle shall be driven according to the applicable test procedure (Appendix 1 or Appendix 1a). 3.4. Not externally chargeable (NOVC HEV) with an operating mode switch 3.4.1. Not externally chargeable (NOVC HEV) with an operating mode switch vehicles, in hybrid mode, are tested according to Annex I to Chapter 5. If several modes are available, the test shall be carried out in the mode that is automatically set after turn on of the ignition key (normal mode). On the basis of information provided by the manufacturer, the Technical Service will make sure that the limit values are met in all hybrid modes. 3.4.2. The vehicle shall be driven according to the applicable test procedure (Appendix 1 or Appendix 1a). 4. TYPE II TEST METHODS 4.1. The vehicles shall be tested according to the test procedure described in Appendix 2. ‘Sub-appendix 1 Method for measuring the electricity balance of the battery of OVC and NOVC HEVS 1. Purpose 1.1. The purpose of this sub-appendix is to describe the method and required instrumentation for measuring the electricity balance of Off Vehicle Charging Hybrid Electric Vehicles (OVC HEV) and Not Off Vehicle Charging Hybrid Electric Vehicles (NOVC HEV). 2. Measurement equipment and instrumentation 2.1. During the tests as described in points 3.1 to 3.4 the battery current shall be measured using a current transducer of the clamp-on type or the closed type. The current transducer (i.e. the current sensor without data acquisition equipment) shall have a minimum accuracy of 0,5 % of the measured value or 0,1 % of the maximum value of the scale. OEM diagnostic testers are not to be used for the purpose of this test. 2.1.1. The current transducer shall be fitted on one of the wires directly connected to the battery. In order to easily measure battery current using external measuring equipment, manufacturers shall, if possible, integrate appropriate, safe and accessible connection points in the vehicle. If that is not feasible, the manufacturer is obliged to support the Technical Service by providing the means to connect a current transducer to the wires connected to the battery in the above described manner. 2.1.2. The output of the current transducer shall be sampled with a minimum sample frequency of 5 Hz. The measured current shall be integrated over time, yielding the measured value of Q, expressed in Ampere hours (Ah). 2.1.3. The temperature at the location of the sensor shall be measured and sampled with the same sample frequency as the current, so that this value can be used for possible compensation of the drift of current transducers and, if applicable, the voltage transducer used to convert the output of the current transducer. 2.2. A list of the instrumentation (manufacturer, model no., serial no.) used by the manufacturer for determining when the minimum state of charge of the battery as been reached during the test procedure defined in points 3.1 and 3.2 and the last calibration dates of the instruments (where applicable) shall be provided to the Technical Service. 3. Measurement procedure 3.1. Measurement of the battery current shall start at the same time as the test starts and shall end immediately after the vehicle has driven the complete driving cycle. ‘Sub-appendix 2 Method of measuring the electric range of vehicles powered by a hybrid electric power train and the OVC range of vehicles powered by a hybrid electric powertrain 1. MEASUREMENT OF THE ELECTRIC RANGE The test method described in this sub-appendix permits to measure the electric range, expressed in km, of vehicles powered by a hybrid electric power train with off-vehicle charging (OVC-HEV). 2. PARAMETERS, UNITS AND ACCURACY OF MEASUREMENTS Parameters, units and accuracy of measurements shall be as follows:
3. TEST CONDITIONS 3.1. Condition of the vehicle
3.2. Climatic conditions For testing performed outdoors, the ambient temperature shall be between 5 °C and 32 °C. The indoors testing shall be performed at a temperature between 20 °C and 30 °C. 4. OPERATION MODES The test method includes the following steps:
Between the steps, if the vehicle shall move, it shall be pushed to the following test area (without regenerative recharging). 4.1. Initial charge of the battery Charging the battery consists of the following procedures: Note: “Initial charge of the battery” applies to the first charge of the battery, at the reception of the vehicle. In case of several combined tests or measurements, carried out consecutively, the first charge carried out shall be an “initial charge of the battery” and the following may be done in accordance with the “normal overnight charge” (described in point 4.1.2.1) procedure. 4.1.1. Discharge of the battery
4.1.2. Application of a normal overnight charge For an OVC HEV, the electrical energy storage device shall be charged according to the following procedure. 4.1.2.1. Normal overnight charge procedure The charging is carried out:
This procedure excludes all types of special charges that could be automatically or manually initiated like, for instance, the equalisation charges or the servicing charges. The manufacturer shall declare that during the test, a special charge procedure has not occurred. 4.1.2.2. End of charge criteria The end of charge criteria corresponds to a charging time of 12 hours, except if a clear indication is given to the driver by the standard instrumentation that the electrical energy storage device is not yet fully charged. In this case, the maximum time is = 3 · claimed battery capacity (Wh)/mains power supply (W) 4.2. Application of the cycle and measurement of the range 4.2.1. To determine the electric range of a hybrid electric vehicle
4.2.2. To determine the OVC range of a hybrid electric vehicle
‘Sub-appendix 3 Electrical energy storage device State Of Charge (SOC) profile for OVC HEV Type I test Condition A of the Type I test
Condition B of the Type I test
|
(1) also known as “externally chargeable”
(2) also known as “not externally chargeable”
(3) In case of more than one “hybrid mode” is available, the procedure of the last right column shall be used
(4) Most electric hybrid mode:
The hybrid mode which can be proven to have the highest electricity consumption of all selectable hybrid modes when tested in accordance with Condition A, to be established based on information provided by the manufacturer and in agreement with the technical service.
(5) Most fuel consuming hybrid mode:
The hybrid mode which can be proven to have the highest fuel consumption of all selectable hybrid modes when tested in accordance with Condition B, to be established based on information provided by the manufacturer and in agreement with the technical service.
ANNEX II
AMENDMENT TO ANNEX III OF CHAPTER 9 OF DIRECTIVE 97/24/EC
Annex III of Chapter 9 of Directive 97/24/EC is amended as follows:
1. |
The following point 1.5 is added: 1.5. “Hybrid electric vehicle (HEV)” means a vehicle that, for the purpose of mechanical propulsion, draws energy from both of the following on-vehicle sources of stored energy:
|
2. |
The following point 2.1.4.4 is inserted: 2.1.4.4. In case of Hybrid vehicle the tests have to be performed 2 times:
|
3. |
The following point 2.1.5.5 is inserted: 2.1.5.5. If the average of four results of Condition A and if the average of four results of Condition B do not exceed the maximum permissible level for the category to which the vehicle being tested belongs, the limits laid down in point 2.1.1 shall be deemed as being complied with. The highest average value shall constitute the result of the test.’ |
ANNEX III
AMENDMENT TO ANNEX IV OF CHAPTER 9 OF DIRECTIVE 97/24/EC
Annex IV of Chapter 9 of Directive 97/24/EC is amended as follows:
1. |
The following point 1.5 is added: 1.5. “Hybrid electric vehicle (HEV)” means a vehicle that, for the purpose of mechanical propulsion, draws energy from both of the following on-vehicle sources of stored energy:
|
2. |
The following point 2.2.4.5 is inserted: 2.2.4.5. In case of Hybrid vehicle the tests have to be performed 2 times:
|
3. |
The following point 2.2.5.5 is inserted: 2.2.5.5. If the average of four results of Condition A and if thes average of four results of Condition B do not exceed the maximum permissible level for the category to which the vehicle being tested belongs, the limits laid down in point 2.2.1 shall be deemed as being complied with. The highest average value shall constitute the result of the test.’ |