This document is an excerpt from the EUR-Lex website
Document 22024A01414
Voluntary Partnership Agreement between the European Union and the Republic of Côte d’Ivoire on forest law enforcement, governance and trade in timber and derived products to the European Union (FLEGT)
Voluntary Partnership Agreement between the European Union and the Republic of Côte d’Ivoire on forest law enforcement, governance and trade in timber and derived products to the European Union (FLEGT)
Voluntary Partnership Agreement between the European Union and the Republic of Côte d’Ivoire on forest law enforcement, governance and trade in timber and derived products to the European Union (FLEGT)
ST/12902/2023/INIT
OJ L, 2024/1414, 27.5.2024, ELI: http://data.europa.eu/eli/agree/2024/1414/oj (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
Date of entry into force unknown (pending notification) or not yet in force.
ELI: http://data.europa.eu/eli/agree/2024/1414/oj
![]() |
Official Journal |
EN L series |
2024/1414 |
27.5.2024 |
Voluntary Partnership Agreement between the European Union and the Republic of Côte d’Ivoire on forest law enforcement, governance and trade in timber and derived products to the European Union (FLEGT)
THE EUROPEAN UNION, hereinafter referred to as ‘the Union’,
and
THE REPUBLIC OF CÔTE D'IVOIRE, hereinafter referred to as ‘Côte d'Ivoire’;
hereinafter referred to individually as a ‘Party’ and collectively as ‘the Parties’,
CONSIDERING the close cooperation between the Union and Côte d'Ivoire, in particular under the Partnership Agreement between the members of the African, Caribbean and Pacific Group of States, of the one part, and the European Community and its Member States, of the other part, signed in Cotonou on 23 June 2000 and revised in Luxembourg on 25 June 2005, and the stepping-stone Economic Partnership Agreement between Côte d'Ivoire, of the one part, and the European Community and their Member States, of the other part, signed in Abidjan on 26 November 2008 and in Brussels on 22 January 2009;
CONSIDERING the Communication from the European Commission to the Council of the European Union and to the European Parliament on ‘Forest Law Enforcement, Governance and Trade (FLEGT) — Proposal for an EU Action Plan’ of 21 May 2003 as a first step towards tackling the urgent issue of illegal logging and associated trade;
SEIZED of the importance of the principles set out in the Rio Declaration on Environment and Development adopted by the United Nations Conference on Environment and Development of 3-14 June 1992, and in particular Principle 10 on the importance of access to information, public awareness and public participation in environmental issues, Principle 20 on the vital role of women in environmental management and development, and Principle 22 on the vital role of indigenous peoples and communities and other local communities in environmental management and development;
CONSIDERING the Non-Legally-Binding Authoritative Statement of Principles for a Global Consensus on the management, conservation and sustainable development of all types of forests, also adopted by the United Nations Conference on Environment and Development of 3-14 June 1992, and the Non-Legally-Binding Resolution on all types of forests, adopted by the UN General Assembly on 17 December 2007;
HAVING REGARD TO the African Convention on the Conservation of Nature and Natural Resources, adopted in Maputo on 11 July 2003;
HAVING REGARD TO the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES), and in particular the need for CITES export permits or certificates of origin issued by CITES parties for specimens of the tree species listed in Appendices II or III thereto;
REAFFIRMING the importance attached by the Parties to the principles and rules which govern multilateral trade, in particular the rights and obligations laid down in the General Agreement on Tariffs and Trade 1994 and in other multilateral agreements listed in Annex 1A to the Agreement establishing the World Trade Organization (WTO) signed in Marrakesh on 15 April 1994, and the need to apply them in a transparent and non-discriminatory manner;
HAVING REGARD to Council Regulation (EC) No 2173/2005 of 20 December 2005 on the establishment of a FLEGT licensing scheme for imports of timber into the European Community (1);
RECOGNISING the contribution that implementing a FLEGT voluntary partnership agreement will make in combating climate change and to efforts to reduce greenhouse gas emissions from deforestation and forest degradation, including conservation, increasing carbon stocks and sustainable forest management (REDD+);
RECOGNISING the role of forests in mitigating the effects of climate change and recalling in this context the Paris Agreement adopted on 12 December 2015 under the United Nations Framework Convention on Climate Change, in particular Article 5 thereof on action to conserve and, where appropriate, enhance sinks and reservoirs of greenhouse gases, including forests;
REAFFIRMING the commitments to halt and reverse deforestation and land degradation by 2030 contained in the Glasgow Leaders' Declaration on Forests and Land Use, signed by the Parties at the World Climate Summit (COP26) held in Scotland from 31 October to 13 November 2021;
REAFFIRMING the Parties' commitment and determination as regards the United Nations' 2030 Agenda for Sustainable Development, and in particular the contribution that implementing a FLEGT voluntary partnership agreement will make to achieving Goals 5 and 15 on promoting, respectively, gender equality and the empowerment of women and girls, as well as sustainable forest management, halting deforestation and adopting measures to tackle the issue of illegal wildlife products;
RECOGNISING the efforts made by Côte d'Ivoire to set up a legality verification system aimed at ensuring that all timber and timber products comply with the relevant legal framework and applicable to the domestic market and exports of timber and timber products from Côte d'Ivoire;
CONSIDERING the importance attached by the Parties to the participation of all relevant stakeholders, without discrimination, including civil society, the private sector and the local population, and to the success of forest governance policies, in particular by means of consultations and public information;
CONSIDERING Côte d'Ivoire's Forest Preservation, Rehabilitation and Extension Policy and the country's forest regulations aimed at preserving biodiversity, achieving 20 % forest cover by 2030, maintaining a favourable climate for the development of socio-economic and agricultural activities, and complying with Côte d'Ivoire's international commitments;
WHEREAS this Agreement constitutes one of the central pillars of the programme to improve forest governance in Côte d'Ivoire, chiefly as regards application of the Forestry Code, the Rural Land Act, the Labour Code, the Environment Code, customs and trade regulations, and other national and international regulations governing sustainable forest management and the timber trade;
WHEREAS Côte d'Ivoire's forestry legislation lays down rules on sustainable forest management and provides a framework conducive to implementing the Forest Preservation, Rehabilitation and Extension Policy;
WHEREAS international treaties on the environment and forestry ratified by Côte d'Ivoire form part of national legislation, which in turn forms the basis for formulating and implementing the country's forestry policy;
REAFFIRMING the Parties' principles of mutual respect, sovereignty, equality and non-discrimination and recognising the benefits arising from this Agreement;
HAVE AGREED AS FOLLOWS:
Article 1
Definitions
For the purposes of this Agreement,
a) |
‘licensing authority’ shall mean the body designated or created by Côte d'Ivoire to issue and validate FLEGT licences; |
b) |
‘FLEGT licence’ shall mean a document issued by Côte d'Ivoire, in paper or electronic form, certifying that timber or timber products from a shipment intended for export to the Union have been produced and verified in accordance with the regulations in force and with this Agreement; |
c) |
‘competent authorities’ shall mean the authorities designated by the Member States of the Union to receive, verify and accept FLEGT licences; |
d) |
‘timber and timber products’ shall mean the products listed in Annex I; |
e) |
‘timber and timber products in transit’ shall mean any timber and timber products originating from a third country which enter the territory of Côte d'Ivoire under customs control and leave it in the same form and with the same country of origin, without having been processed or marketed; |
f) |
‘legally produced timber’ shall mean timber and timber products harvested or imported in accordance with the legislation of Côte d'Ivoire listed in Annex II; in the case of imported timber, timber products harvested, produced and exported in accordance with the legislation of the country of harvest and the procedures described in Annex III; |
g) |
‘HS code’ shall mean a code of up to six digits as set out in the nomenclature of the Harmonized Commodity Description and Coding System established by the International Convention on the Harmonized Commodity Description and Coding System of the World Customs Organization, done at Brussels on 14 June 1983, and the subsequent amendments thereto; |
h) |
‘shipment’ shall mean a quantity of timber products covered by a FLEGT licence that is sent from Côte d'Ivoire by a consignor and is presented for release for free circulation at a customs office in the Union; |
i) |
‘export’ shall mean the action of removing or having removed timber and timber products from the customs territory of Côte d'Ivoire; |
j) |
‘import into the Union’ shall mean the release for free circulation into the Union within the meaning of Article 201 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 establishing the Union Customs Code (2), of timber products which cannot be classified as ‘goods of a non-commercial nature’ as defined in Article 1(21) of Commission Delegated Regulation (EU) 2015/2446 of 28 July 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards detailed rules concerning certain provisions of the Union Customs Code (3); |
k) |
‘release for free circulation’ shall mean a Union customs procedure which confers the customs status of Union goods on goods which are not from the Union in accordance with Regulation (EU) No 952/2013. |
Article 2
Objective
1. The objective of this Agreement, in accordance with the joint commitment of the Parties to sustainably manage all types of forests, is to provide a legal framework to ensure that timber and timber products defined in Article 1, point (d) and imported into the Union from Côte d'Ivoire have been legally produced and to promote trade in said timber and timber products and implement the principle of sustainability.
2. This Agreement also provides a basis for dialogue and cooperation between the Parties aimed at facilitating and promoting its full implementation and at strengthening the enforcement of forest law and governance.
Article 3
FLEGT licensing scheme
1. A FLEGT licensing scheme shall be established between the Parties. The scheme shall lay down a set of procedures and requirements to verify and certify, by means of FLEGT licences, that timber and timber products shipped to the Union have been legally produced. In accordance with Regulation (EC) No 2173/2005 and with this Agreement, the Union shall not accept shipments from Côte d'Ivoire for import into the Union unless they are covered by FLEGT licences.
2. The FLEGT licensing scheme shall apply to the timber and timber products defined in Article 1, point (d).
3. The Parties shall agree to take all measures necessary to implement the FLEGT licensing scheme.
Article 4
Licensing authority
1. Côte d'Ivoire shall designate the licensing authority and send its contact details to the European Commission. The Parties shall make this information available to the public.
2. The licensing authority shall issue FLEGT licences covering shipments of timber produced legally produced in Côte d'Ivoire and intended for export to the Union, in accordance with the procedures set out in Annex V.
3. The licensing authority shall issue FLEGT licences only for shipments of timber and timber products that have been subject to verification checks ascertaining their legality, as provided for in Article 8.
4. In accordance with the principle of transparency, the licensing authority shall record and make public its procedures for issuing FLEGT licences. It shall also retain the records of all shipments covered by FLEGT licences and, in accordance with national data-protection legislation, make these records available for the purposes of independent audits, as provided for in Article 10 of this Agreement, and independent monitoring, as provided for in Annex III.
Article 5
Competent authorities
1. The European Commission shall provide Côte d'Ivoire with the contact details of the competent authorities. The Parties shall make this information available to the public.
2. The competent authorities shall verify that each shipment is covered by a valid FLEGT licence before releasing that shipment for free circulation in the Union. The release of the shipment may be suspended and the shipment may be held if there are doubts regarding the validity of the FLEGT licence.
3. The competent authorities shall maintain and publish annually a record of FLEGT licences received.
4. In accordance with national legislation on data protection, the competent authorities shall grant the independent auditor designated by Côte d'Ivoire access to the relevant documents and data.
5. When timber and timber products from species listed in the Appendices to the CITES and covered by a FLEGT licence enter the Union, they shall undergo only the examination laid down in Council Regulation (EC) No 338/97 of 9 December 1996 on the protection of species of wild fauna and flora by regulating trade therein (4). Whatever the case, the FLEGT licence scheme provides assurance of the legal harvesting of these products.
Article 6
FLEGT licences
1. FLEGT licences shall be issued by the licensing authority as a means of attesting that timber products have been legally produced.
2. FLEGT licences shall be issued using the form given in Appendix 1 to Annex V. They shall be written in French.
3. The Parties may, by common agreement, establish electronic systems for the issuing, transmission and receipt of FLEGT licences.
4. The procedure for issuing FLEGT licences and the technical specifications for FLEGT licences are set out in Annex V.
Article 7
Legally produced timber
For the purposes of this Agreement, a definition of ‘legally produced timber’ is given in Article 1(f), and more precise information in given in Annex II. That Annex describes the Côte d'Ivoire legislation that must be complied with in order for timber and timber products to be covered by a FLEGT licence. That Annex also includes documentation containing the principles, criteria and indicators serving to prove compliance with such legislation.
Article 8
Verification of legally produced timber and timber products
1. Côte d'Ivoire shall set up a system for verifying that timber and timber products intended for shipment have been legally produced and that only shipments verified as such are exported to the Union (‘legality verification system’ or ‘LVS’). The LVS shall include compliance checks and procedures to ensure that no timber of illegal or unknown origin enters the supply chain. By means of this system, Côte d'Ivoire also verifies the legality of imported timber and timber products.
2. The LVS is described in Annex III.
Article 9
Release for free circulation of shipments covered by a FLEGT licence
1. The procedures governing release for free circulation in the Union for shipments covered by a FLEGT licence are described in Annex IV.
2. Where the competent authorities have reasonable grounds to suspect that a FLEGT licence is not valid or authentic or does not conform to the shipment it purports to cover, the competent authority concerned shall apply the procedures described in Annex IV.
3. Where persistent disagreements or difficulties arise in consultations concerning FLEGT licences, they may be referred to the Joint Implementation Committee (JIC) established pursuant to Article 19.
Article 10
Independent auditor
1. The Parties shall agree on the need to call on the services of an independent auditor at agreed intervals to check the performance and efficiency of the Côte d'Ivoire LVS, as defined in Annex VI.
2. Côte d'Ivoire shall engage the services of an independent auditor, in consultation with the Union, to perform the tasks listed in Annex VI.
3. The independent auditor shall submit their observations to the Parties by means of reports, in accordance with the procedure described in Annex VI. Reports of the independent auditor shall be published in accordance with the procedure set out in Annex VI.
4. The Parties shall facilitate the work of the independent auditor, in particular by ensuring that the auditor has access to the information necessary for the performance of their functions. However, the Parties may, in accordance with its legislation on data protection, withhold any information that they is not permitted to disclose.
Article 11
Irregularities
The Parties shall inform each other in writing, in accordance with Article 21 of this Agreement, if they suspect or have found evidence of any circumvention or irregularity in the FLEGT licensing scheme, including in relation to the following:
a) |
fraudulent trade, in particular the diversion of trade from Côte d'Ivoire to the Union via a third country where there is reason to believe that this is done with the intention of avoiding licensing; |
b) |
FLEGT licences covering timber and timber products which contain timber from third countries and are suspected of being illegally produced; |
c) |
fraud in obtaining or using FLEGT licences. |
Article 12
Start-up date for implementation of the FLEGT licensing scheme
1. The Parties shall notify each other via the JIC when they consider they have made the necessary preparations for the FLEGT licensing scheme to become fully operational.
2. The Parties shall commission an independent assessment of the FLEGT licensing scheme on the basis of the criteria set out in Annex VII. The independent assessment shall determine whether the LVS underpinning the FLEGT licensing scheme is adequately fulfilling its functions.
3. On the basis of the recommendations of the JIC, the Parties shall agree on a start date for the FLEGT licensing scheme.
4. The Parties shall notify each other of that date in writing, in accordance with Article 21 of this Agreement.
Article 13
Application of the LVS to timber and timber products not exported to the Union
By means of the LVS, Côte d'Ivoire shall endeavour to verify the legality of timber and timber products for both domestic consumption and export to markets other than the Union.
Article 14
Timetable for implementation
1. The Parties shall approve, via the JIC, a timetable for implementing this Agreement.
2. The JIC shall assess the progress made in the implementation of this Agreement against the agreed timetable.
Article 15
Support measures
1. The areas where support measures, including additional technical and financial resources, are needed to implement this Agreement and to address the causes and drivers of illegal logging are indicated in Annex VIII.
2. Côte d'Ivoire shall ensure that the implementation of this Agreement is integrated into its national planning instruments and national budget.
3. The Parties shall ensure that activities associated with the implementation of this Agreement are coordinated with existing and future development programmes and initiatives, in particular those related to REDD+.
4. All resources necessary for the implementation of this Agreement shall be made available in accordance with the procedures of the Union and its Member States governing programming cooperation with Côte d'Ivoire and with Côte d'Ivoire's budgetary procedures.
Article 16
Stakeholder involvement
1. Côte d'Ivoire shall involve its relevant stakeholders in the implementation of this Agreement, including civil society organisations, private-sector businesses and trade unions, and local populations, via the traditional authorities.
2. Côte d'Ivoire shall ensure that this Agreement is implemented and monitored in a transparent manner, with the participation of the relevant stakeholders.
3. The Parties shall ensure the gender aspect is taken into account, in particular as regards greater acknowledgement of the role of women and girls in forest governance and in the implementation of this Agreement.
4. The Union shall hold regular consultations with stakeholders on the implementation of this Agreement, taking into account its obligations under the Convention on Access to Information, Public Participation in Decision-making and Access to Justice in Environmental Matters of 1998, signed in Aarhus on 25 June 1998.
Article 17
Social safeguards
1. In order to minimise potential adverse effects on the stakeholders listed in Article 16(1), including local populations, the Parties hereby agree to assess the impact of this Agreement on their way and conditions of life.
2. The Parties shall monitor the impact of this Agreement on the stakeholders listed in Article 16(1), including local populations, taking reasonable and appropriate steps to mitigate any adverse effects. The Parties may agree on additional measures to address any adverse effects, on the basis of a method of assessing this Agreement agreed upon by the Parties.
Article 18
Market-related incentives
Taking into account their international obligations, the Union shall promote favourable access to its market for timber and timber products, including via the promotion of public and private procurement policies that acknowledge efforts to ensure a supply of legal timber products.
Article 19
Joint Implementation Committee
1. In order to ensure the governance of this Agreement, the Parties shall establish a Joint Implementation Committee (JIC). The specific functions and tasks of the JIC shall include managing, monitoring and assessing this Agreement and fostering dialogue and exchange of information between the Parties. These functions and tasks are described in Annex X.
2. The JIC shall be established within three months of the entry into force of this Agreement. To this end, each Party shall designate its representatives at the JIC. The JIC shall make its decisions by consensus. It shall be co-chaired by two senior officials, one appointed by each Party.
3. The JIC shall establish its rules of procedure.
4. The JIC shall meet at least twice a year in the first two years and at least once per year thereafter, on a date and with an agenda agreed in advance by the Parties. Additional meetings may be convened at the request of either of the Parties.
5. The JIC shall ensure that its work is transparent and that information about their work and decisions are made available to the public.
6. The JIC shall publish an annual report. The information to be included in that report are given in Annex IX.
Article 20
Transparency and access to public information
1. In order to improve governance, provision of information to stakeholders shall be central to this Agreement. Information shall be published regularly to facilitate the implementation and monitoring of the FLEGT licensing scheme, increase transparency and improve stakeholder and consumer confidence, and ensure that the Parties are accountable. Details of the information to be published are set out in Annex IX.
2. Each Party shall put in place the most appropriate communication mechanisms (including online means and the media, publishing documents or reports, organising workshops) to pass information on the public.
3. In particular, the Parties commit to give the various stakeholders reliable, relevant and up-to-date information.
4. In accordance with their respective legislation, the Parties agree not to disclose confidential information exchanged under this Agreement. Neither Party shall disclose to the public any information exchanged under this Agreement concerning trade secrets or confidential commercial information, nor permit its authorities or the staff or contractors of those authorities to disclose such information.
Article 21
Communication on implementation
1. The representatives of the Parties responsible for official communications concerning the implementation of this Agreement shall be:
— |
for the European Union, the Head of the European Union Delegation in Côte d'Ivoire; |
— |
for Côte d'Ivoire: the Minister for Forestry. |
2. The Parties shall communicate the information necessary for implementing this Agreement to each other in a timely manner.
3. The Parties shall endeavour to communicate with the public in a coordinated and non-contradictory manner on the interpretation and implementation of this Agreement.
Article 22
Territorial application
This Agreement shall apply, on the one hand, to the territories in which the Treaty on European Union and the Treaty on the Functioning of the European Union apply, under the conditions laid down in those Treaties, and, on the other, to the territory of Côte d'Ivoire.
Article 23
Consultations and mediation
1. The Parties shall at all times endeavour to agree on the interpretation and implementation of this Agreement. In the event of disagreement or conflict, the Parties shall endeavour to find solutions through consultation and mediation.
2. A party wishing to launch a consultation process shall notify the other Party and the JIC in writing of its request, specifying the subject matter and summarising the reasons.
3. The consultation process shall start within 40 days and shall be deemed to be concluded within 90 days of the date on which the request for a consultation process was submitted, unless the Parties agree otherwise. However, in urgent cases, either Party may ask for a consultation process be launched within 5 days and concluded within 30 days of the request, unless the Parties agree otherwise.
4. If a consultation process does not lead to a mutually agreed resolution of the disagreement or conflict, the Parties may agree to call upon the services of a mediator. Notwithstanding any such request, either Party may refer the matter to arbitration directly.
5. The Parties shall agree on the selection of a mediator within 15 days of reaching agreement on the mediation request. The mediator shall receive submissions from the Parties and agree on a mediation session. Unless the Parties agree otherwise, within 60 days of their being selected, the mediator shall submit to both Parties an opinion on resolving the disagreement or conflict in accordance with this Agreement.
6. The mediator's opinion shall not be legally binding.
Article 24
Arbitration
1. If the consultation procedure or, where applicable, mediation fails to lead to the resolution of the disagreement or conflict as provided for in Article 23, any dispute, difference of opinion or complaint arising from or relating to this Agreement or the existence, interpretation, implementation, non-performance, resolution or nullity thereof shall be resolved via arbitration in accordance with the arbitration rules of the Permanent Court of Arbitration of 2012.
a) |
The number of arbitrators shall be three. |
b) |
Arbitration shall take place in The Hague, Netherlands. |
c) |
The language to be used in arbitration proceedings shall be French. |
2. Either Party may request the establishment of a court of arbitration by notifying the other Party and the Permanent Court of Arbitration of 2012 thereof in writing.
3. Rulings of the court of arbitration shall be legally binding on the Parties, who shall take all measures necessary to implement them in good faith.
4. Each Party shall inform the other Party and the JIC of the measures taken to implement the ruling of the court of arbitration. The JIC shall analyse the measures taken and, if necessary, may recommend additional or remedial measures to ensure that the ruling of the court of arbitration is complied with. Either Party may ask the court of arbitration to rule on compliance with its original arbitration ruling.
5. Le JIC shall establish arbitration procedures insofar as they may differ from the arbitration rules of the Permanent Court of Arbitration of 2012.
Article 25
Suspension
1. A Party wishing to suspend this Agreement shall notify the other Party in writing of its intention to do so, specifying the reasons. The matter shall subsequently be discussed by the Parties, taking into account the opinions of relevant stakeholders.
2. Either Party may suspend the implementation of this Agreement if the other Party:
a) |
fails to fulfil its obligations under this Agreement; |
b) |
fails to maintain the regulatory and administrative measures and means required to implement this Agreement; |
c) |
acts or fails to act in a way that poses significant risks to the environment, health, safety or security of the people of either the Union or Côte d'Ivoire. |
3. The conditions of this Agreement shall cease to apply 30 calendar days after notification under paragraph 1 is given.
4. Application of this Agreement shall resume 30 calendar days after the Party that has suspended its application informs the other Party that the reasons for the suspension no longer apply.
Article 26
Amendments
1. A Party wishing to amend this Agreement shall submit a proposal to the other Party at least 90 calendar days before the next meeting of the JIC. The Committee shall discuss the proposal and, if a consensus is reached, make a recommendation. Each Party shall consider the recommendation and, if it is in agreement, inform the other Party in order to agree upon a date for signing the amendment. Once the amendment is signed, each Party shall adopt or ratify it in accordance with its own procedures.
2. Any amendment so adopted or ratified by the Parties shall enter into force on the first day of the month following the date on which the Parties notify each other of the completion of the procedures necessary for this purpose.
3. By way of derogation from paragraph 1, upon recommendation by the JIC and approval by the Parties, the JIC may adopt amendments to the Annexes to this Agreement.
4. Notification of any amendment shall be sent to the depository of this Agreement.
Article 27
Duration
This Agreement shall be valid for 10 years from its entry into force. It shall be automatically extended for consecutive periods of 10 years, unless a Party terminates it in accordance with the procedure laid down in Article 28.
Article 28
Termination
Either Party may terminate this Agreement by giving written notification to the other Party. This Agreement shall cease to apply 12 months after the date of such notification.
Article 29
Annexes
The Annexes to this Agreement shall form an integral part thereof.
Article 30
Authentic Texts
This Agreement is drawn up in duplicate in Bulgarian, Croatian, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Irish, Italian, Latvian, Lithuanian, Maltese, Polish, Portuguese, Romanian, Slovak, Slovenian, Spanish and Swedish, each language version being equally authentic. In the event of divergence, the French version shall prevail.
Article 31
Entry into force
1. This Agreement shall enter into force on the first day of the month following the date on which the Parties give final notification in writing of completion of their respective procedures necessary for this purpose.
2. Notifications shall be sent to the Secretary-General of the Council of the European Union, who shall be the depository of this Agreement.
IN WITNESS WHEREOF, the undersigned plenipotentiaries, duly authorised to that effect, have signed this Agreement.
(1) OJ EU L 347, 30.12.2005, p. 1.
(2) OJ EU L 269, 10.10.2013, p. 1.
ANNEXES
Annex I: |
List of timber and timber products subject to FLEGT licensing |
Annex II: |
Definition of legally produced timber |
Annex III: |
Description of the legality verification system |
Annex IV: |
Conditions governing the release for free circulation in the Union of timber and timber products exported from Côte d'Ivoire and covered by a FLEGT licence |
Annex V: |
Procedure for issuing FLEGT licences and technical specifications |
Annex VI: |
Terms of references of the independent auditor |
Annex VII: |
Criteria for the independent assessment of the legality verification system (LVS) |
Annex VIII: |
Support measures |
Annex IX: |
Information made public |
Annex X: |
Joint Implementation Committee |
ANNEX I
LIST OF TIMBER AND TIMBER PRODUCTS SUBJECT TO FLEGT LICENSING
The following timber and timber products are subject to FLEGT licensing if they are intended for export to the Union. However, where rules in place in Côte d'Ivoire prohibit the export of certain timber or timber products, such products are not eligible for a FLEGT licence.
HS codes |
Description |
4403 |
Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared |
4406 |
Railway or tramway sleepers (cross-ties) of wood |
4407 |
Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm |
4408 |
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm |
44 09 |
Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed |
|
ex ex. 44 09 21 |
44 10 |
Particle board, oriented strand board (OSB) and similar board (for example, waferboard) of wood or other ligneous materials, whether or not agglomerated with resins or other organic binding substances |
44 12 |
Plywood, veneered panels and similar laminated wood |
|
ex ex. 44 12 10 |
44 15 |
Packing cases, boxes, crates, drums and similar packings, of wood; cable-drums of wood. Pallets, box pallets and other load boards, of wood; pallet collars of wood |
44 17 |
Tools, tool bodies, tool handles, broom or brush bodies and handles, of wood; boot or shoe lasts and trees, of wood |
44 18 |
Builders' joinery and carpentry of wood, including cellular wood, panels, assembled flooring panels, shingles and shakes |
|
ex ex. 44 18 73 |
|
ex ex. 44 18 91 |
44 19 |
Tableware and kitchenware, of wood |
|
ex ex. 44 19 11 |
|
ex ex. 44 19 12 |
|
ex ex. 44 19 19 |
44 20 |
Wood marquetry and inlaid wood; caskets and cases for jewellery or cutlery, and similar articles, of wood; statuettes and other ornaments, of wood; wooden articles of furniture not falling under Chapter 94 |
44 21 |
Other articles of wood |
|
ex ex. 44 21 91 |
94 03 30 |
Wooden furniture of a kind used in offices |
94 03 40 |
Wooden furniture of a kind used in the kitchen |
94 03 50 |
Wooden furniture of a kind used in the bedroom |
94 03 60 |
Other wooden furniture |
94 03 91 |
Parts of wood |
94 06 10 |
Prefabricated buildings of wood |
ANNEX II
DEFINITION OF LEGALLY PRODUCED TIMBER
1.
Côte d'Ivoire legislation to be complied with in order to obtain a FLEGT licence or a public legality certificateThe following laws and regulations must be complied with in order for a shipment of timber or timber products to be covered by a FLEGT licence or a public legality certificate:
— |
OHADA Uniform Act of 17 April 1997 on Commercial Companies and the Economic Interest Groupings; |
— |
OHADA Uniform Act of 15 December 2010 on Cooperatives; |
— |
OHADA Uniform Act of 15 December 2010 on General Commercial Law; |
— |
the General Tax Code and subsequent versions thereof; |
— |
the Customs Code and subsequent versions thereof; |
— |
the Social Security Code and the implementing legislation thereof; |
— |
the Code of Civil, Commercial and Administrative Procedure; |
— |
Law No 98-750 of 23 December 1998 on rural land tenure and the implementing legislation thereof; |
— |
the Labour Code and the implementing legislation thereof; |
— |
the Forestry Code and the implementing legislation thereof, in particular:
|
2.
Legal reforms planned during the implementation phase of this AgreementDuring the implementation phase of this Agreement, a number of legal reforms are planned to supplement the legal framework, in particular to:
— |
lay down detailed rules on profit sharing from forest management; |
— |
determine the minimum exploitable diameters of natural forest species; |
— |
lay down detailed rules for the operation of timber processing units; |
— |
harmonise and establish documents for the collection, monitoring, checking and movement of products of logging. |
— |
set up the implementing bodies for the LVS; |
— |
enhance the legal framework governing the national market, especially as regards access to resources, production and marketing; |
— |
clarify the means of identifying owners of forest resources and make it easier to register forests, in cases where land certificates or title deeds are not available; |
— |
provide for model agreements between forest resource owners and loggers; |
— |
supplement the procedures for creating and managing Community forests; |
— |
revise the tax system for logging, particularly in forests belonging to natural persons and legal persons governed by private law; |
— |
provide for incentives throughout the value chain to encourage the protection of forests and the restoration of forest resources, including an incentivising legal and fiscal framework and simplified procedures covering forestry, logging, and the transport and marketing of forest products, in particular those coming from private forests; |
— |
clarify the application of a logging ban beyond the 8th parallel. |
3.
Legality gridsThe legality grids identify the principles, criteria and indicators used to demonstrate compliance with the laws and regulations referred to in point 1 of this Annex. In order to make this Annex operational and to ensure uniform verification requirements, Côte d'Ivoire draws up a verification manual identifying the documents that are used for verification and that correspond to the indicators listed in the legality grids (hereinafter referred to as ‘verifiers’). That manual is approved by the JIC and published on the website of the Ministry of Forestry (see also Annex III).
Legality Grid 1 — Loggers
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
Legality Grid 2 — Processors
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
Not applicable |
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
Legality Grid 3 — Importer/exporter/trader
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
Not applicable |
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
ANNEX III
DESCRIPTION OF LEGALITY VERIFICATION SYSTEM
CONTENTS
1. |
General provisions |
2. |
Components of the LVS |
3. |
Scope of the LVS
|
4. |
Checks and verification
|
5. |
Recognition of private and public certificates |
6. |
Data management system |
7. |
Handling cases of non-compliance |
8. |
Issuing FLEGT licences and legality certificates |
9. |
Independent audit |
10. |
Independent monitoring |
11. |
Complaint management system |
1. General provisions
Côte d'Ivoire's legality verification system aims to ensure the legality of timber and timber products (hereinafter referred to as ‘timber’ in this Annex). A FLEGT licence is required for all exports of timber, in accordance with the list of products in Annex I, to countries of the Union. For other countries, a public certificate certifying the legality and traceability of the timber is issued in accordance with the requirements of the LVS.
The LVS is based on national legislation in force. It also incorporates the system of State checks at each stage of the supply chain, i.e. the award of rights and licences, logging, transport, processing, export and import, as well as trading on the domestic market.
The LVS has been developed via a multi-stakeholder process involving the authorities concerned and representatives of civil society organisations, the private sector and local populations, via the traditional authorities.
2. Components of the LVS
The LVS is made up of the following components:
a) |
the definition of legally produced timber given in Annex II of this Agreement sets out the legal and regulatory requirements for timber to be covered by a FLEGT licence or a public legality certificate, as appropriate. Annex II also contains legality grids identifying the principles, criteria and indicators used to verify compliance with the legal and regulatory framework; |
b) |
legality and traceability checks aim, on the one hand, to ensure that operators are legally constituted and approved and that their activities are legal and, on the other hand, to trace the journey of timber from felling to the point of marketing or export. This activity covers the checks carried out by the competent State bodies, as provided for in the legal framework and in the administrative documents setting out the detailed procedures for State checks; |
c) |
legality and traceability verification is in addition to legality and traceability checks and helps to ensure the legality of marketed and exported timber. Verification targets not only the activities of the operators but also those of the State bodies responsible for issuing documentation and conducting checks. This stage is handled by one or more private verification agencies approved by the forestry authorities; |
d) |
the licensing authority issues FLEGT licences only for shipments of timber destined for the Union market, in accordance with the procedures set out in Annex V, and following the legality and traceability verification process described in this Annex. The legality of timber destined for export markets outside the Union or for the domestic market is certified by means of specific public certificates also issued by the FLEGT licensing authority, following the legality and traceability verification process described in this Annex; |
e) |
the independent audit of the system, the terms of reference of which are set out in Annex VI, assesses the functioning, credibility and effectiveness of the LVS. This audit is carried out by an independent body recruited by Côte d'Ivoire in consultation with the Union; |
f) |
independent monitoring is an integral part of the LVS. It is led by civil society organisations and provides stakeholders with information on the application of legal and regulatory requirements with a view to improving the governance of the sector; |
g) |
the complaint management system enables complaints relating to the verification of the legality of timber to be registered and processed in order to give follow-up within the pre-established timeframe. Through dialogue, this system enables the various actors affected by the LVS to submit a complaint concerning the performance of checks and legality and traceability verification or concerning the system for issuing FLEGT licences. |
The components of the LVS can be viewed as follows:
3. Scope of the LVS
3.1. Sources of timber covered by the LVS
The LVS covers all the products defined in Annex I to this Agreement originating in:
a) |
forests belonging to legal persons governed by public law, comprising: (i) private forests belonging to the State, made up of classified forests, agro-forests and forests acquired or created by the State in rural areas; and (ii) forests belonging to local authorities, made up of forests classified on behalf of local authorities, forests granted by the State and forests acquired or created by local authorities in rural areas; |
b) |
forests belonging to legal persons governed by private law and natural persons, made up of natural forests or forests created by legal persons governed by private law on lawfully acquired land and Community forests; |
c) |
forests belonging to natural persons, comprising:
|
d) |
natural trees and trees planted outside a forest; |
e) |
imported timber. However, as provided for in point 5 of this Annex, the legality of timber imported under a FLEGT licence or a CITES permit is recognised as of right; |
f) |
deforestation and clearing activities and seized forest resources. However, timber from deforestation and clearing activities and seized or confiscated timber will be covered by the LVS without being eligible for a FLEGT licence. |
The LVS does not cover timber in transit, as such timber originating from a third country enters the territory of Côte d'Ivoire under customs control and leaves it in the same form and with the same country of origin, without having being processed or marketed. Timber in transit therefore remains separate from the supply chain covered by the LVS, is not subject to legality verification via the LVS, and is not covered by the FLEGT licensing scheme. The LAS also does not cover finished products imported into Côte d'Ivoire and re-exported.
3.2. Markets covered by the LVS
The LVS covers the following markets:
a) |
the Union market: the LVS enables verification that timber, including imported timber, to be shipped to or marketed in the Union has been legally produced. The system includes compliance checks and procedures to ensure that timber of illegal or unknown origin does not enter the supply chain to the Union. A FLEGT licence is issued following verification of the legal compliance of timber destined for the Union market; |
b) |
markets outside the Union: the LVS enables verification that timber, including imported timber, to be exported to markets outside the Union has been legally produced. A public legality certificate is issued following verification of the legal compliance of timber destined for markets outside the Union; |
c) |
the domestic market: the LVS enables verification that timber, including imported timber, to be used domestically has been legally produced. A public legality certificate may be issued following verification of the legal compliance of timber destined for the domestic market. |
3.3. Actors involved in the LVS
The LVS requires the involvement of the following actors:
a) |
the JIC is the implementation body set up by the Parties to this Agreement, as provided for in Article 19 thereof and Annex X thereto; |
b) |
the system of State checks is handled by those public authorities, including the bodies under their authority, that are authorised to carry out legality and traceability checks and responsible for ensuring compliance with the legislation listed in Annex II to this Agreement (see point 4.1 of this Annex); |
c) |
when implementing this Agreement, Côte d'Ivoire sets up a National Forestry Governance Committee (NFGC), to which permanent technical secretariat services are provided by a department responsible for forest legality and traceability. This department is designated by the forestry authorities, which provides it with the operational resources necessary to guarantee its autonomy. The NFGC and the department responsible for forest legality and traceability will emerge from the current Technical Committee on Negotiating the FLEGT Voluntary Partnership Agreement and its secretariat. In addition to its powers related to implementation of the National Strategy for Forest Preservation, Rehabilitation and Extension, the NFGC acts as a steering committee for the LVS and the complaint management system linked to the LVS. Côte d'Ivoire ensures that the various stakeholders in the forestry sector, including the public and private sectors, civil society and the traditional authorities are part of the NFGC and effectively perform their functions in relation to the LVS. The department responsible for forest legality and traceability is a permanent body which assists the NFGC in its tasks of steering and handling complaints, manages the data management system, and facilitates dialogue between the various administrative departments concerned by the LVS, including via a working group in which they are represented; |
d) |
the licensing authority is a body under the authority of the Ministry of Forestry (see point 8 of this Annex and Annex V to this Agreement); |
e) |
verification audits are carried out by one or more verification agencies, which are private entities approved for this purpose by the forestry authorities during the implementation phase of this Agreement (see point 4.2.2 of this Annex); |
f) |
all operators involved along the timber value chain are covered by the LVS. The legality grids given in Annex II to this Agreement are based on three types of operator: (i) loggers — legal or natural persons approved for logging by the Ministry of Forestry. Felling trees, and shaping and transporting timber, as well as any other timber extraction for commercial purposes, are deemed to be logging activities; (ii) processors — producers of material goods by means of processing and developing the wood raw material. They are also responsible for transporting timber between processing plants; and (iii) domestic timber traders, timber importers and exporters — operators who market, import or export timber; |
g) |
civil society is involved in the LVS as an independent observer. It interacts with other actors involved in the LVS, participates as an observer in verification activities, and has access to the information requirement to fulfil this observation role (see point 10 of this Annex); |
h) |
the independent auditor assesses the proper performance and effectiveness of the LVS (see point 9 of this Annex and Annex VI of this Agreement). Independent audits cover the role and activities of actors insofar as they concern the LVS. In order to determine whether verification actually detects possible cases of non-compliance at check level and on the ground, the independent auditor also audits the relevant activities of:
|
The following diagram illustrates the interactions between these different actors:
3.4. Activities covered by the LVS
The LVS cover all activities of forest-based operators, from the award of title deeds, logging, processing, marketing on the domestic market, to the import and export of the products listed in Annex I. The LVS also covers the activities of the State bodies responsible for issuing documentation and conducting checks.
The LVS is based on the definition of legally produced timber (see Annex II), which provides the basis for assessing the legal compliance of all activities related to the production and marketing of timber.
The LVS includes enhanced checks with a level of verification necessary to verify compliance with legality and traceability requirements and to detect any cases of non-compliance with those requirements.
4. Checks and verification
The LVS is divided into two stages. The first stage concerns the checks carried out by the competent administrative services (State checks). The second stage concerns the verification carried out by one or more private verification agencies approved by the forestry authorities whose activities are supervised by the department responsible for forest legality and traceability.
4.1. Checks
Legality checks aim to ensure that operators are legally constituted and approved and that the activities carried out throughout the forest/timber industry are legal.
Traceability checks aim to trace the route of the timber from the logging site or border post (where the timber entered Côte d'Ivoire) to the point of marketing on the national market or export, while ensuring that the supply chain is watertight.
This stage concerns the usual checks carried out by the competent State bodies and provided for in both the legal framework and the check procedures. Checks therefore target all operators in the sector: operators, processors, importers, exporters and traders.
4.1.1. Legality checks
Legality checks cover the activities of authorised administrative departments responsible for ensure compliance with the legal and regulatory requirements set out in Annex II (see table ‘Main State bodies involved in legality checks, by type of operator’).
Table: Main State bodies involved in legality checks, by type of operator |
|||
|
Grid 1: Logger |
Grid 2: Processor |
Grid 3: Export/importer (traders) |
Principle 1: Legal constitution and approvals |
checks conducted chiefly by the competent courts (commercial court, court of first instance or detached section of the court), the body responsible for social security, and the tax, trading and forestry authorities |
checks conducted chiefly by the competent courts (commercial court, court of first instance or detached section of the court), the body responsible for social security, and the tax, trading and forestry authorities |
checks conducted chiefly by the competent courts (commercial court, court of first instance or detached section of the court), the body responsible for social security, and the tax, trading and forestry authorities |
Principle 2: Access rights to forest resources |
checks conducted chiefly by the forestry and land authorities |
not applicable |
not applicable |
Principle 3: Exercise of activities in accordance with the rules in force |
checks conducted chiefly by the forestry and tax authorities |
checks conducted chiefly by the forestry and tax authorities |
checks conducted chiefly by the forestry, tax and customs authorities |
Principle 4: Transport of timber |
checks conducted chiefly by the forestry authorities |
checks conducted chiefly by the forestry authorities |
checks conducted chiefly by the forestry and customs authorities |
Principle 5: Environmental obligations |
checks conducted chiefly by the forestry and environment authorities |
checks conducted chiefly by the forestry and environment authorities |
checks conducted chiefly by the forestry, agriculture and environment authorities |
Principle 6: Social obligations |
checks conducted chiefly by the forestry authorities and the bodies responsible for social security, health and safety at work, and employment |
checks conducted chiefly by the forestry authorities and the bodies responsible for social security, health and safety at work, and employment |
checks conducted chiefly by the forestry authorities and the bodies responsible for social security, health and safety at work, and employment |
The activities involved in this stage include the issuing of documents, documentary checks (validity and regularity of the document, accuracy of data, etc.), on-the-spot checks and any other checks performed by the competent authorities.
The specifics of the various procedures and the allocation of powers concerning legality and traceability checks evolve periodically to reflect political priorities and ministerial reshuffles and to move towards paperless procedures and administrative check documentation. Côte d'Ivoire ensures that all manuals, guidelines and other administrative documents setting out the check procedures followed by the various authorities are made available to the public by posting them on the website dedicated to this Agreement. Such documentation includes:
— |
manuals of procedure of the authorities concerned by the LVS; |
— |
technical rules and standards established by the authorities concerned by the LVS. |
4.1.2. Traceability checks
The national traceability system makes it possible to track all timber from the logging site or border post (where the timber entered Côte d'Ivoire) to the place of marketing or export, via the transport and processing stages. In order to ensure effective traceability of timber throughout the supply chain, the national traceability system enables the accuracy of the data reported at each stage to be confirmed and the consistency of said data from one stage to the next to be ensured.
The national traceability system is finalised upon implementation of this Agreement. Traceability is monitored according to the following main steps:
|
Step 0: control of the boundaries of the forest parcel |
|
Step 1: survey/inventory |
|
Step 2: felling and marking of stumps and trunks |
|
Step 3: conditioning (cutting in forest) |
|
Step 4: loading logs |
|
Step 5: transport of logs to the factory's log yard |
|
Step 6: receipt of logs at the factory's log yard |
|
Step 7: preparing logs (spreading/cutting) |
|
Step 8: entry into the processing chain |
|
Step 9: processing |
|
Step 10: monitoring of production (including packing, if applicable) |
|
Step 11: monitoring of marketing |
A timber traceability check manual is drawn up by the Côte d'Ivoire forestry authorities and posted on its website.
4.2. Verification
4.2.1. Verification targets
The verification stage is in addition to the check stage and aims to ensure the legality and traceability of imported, marketed or exported timber. Verification therefore targets not only operators but also the State bodies responsible for issuing documentation and conducting checks.
As a rule, legality is verified by operator and by logging permit for a fixed and renewable period of validity, while traceability is verified by shipment. However, in specific cases to be set out in the verification manual referred to in point 4.2.3, legality may be verified by shipment or traceability by operator.
4.2.2. Verification agencies
Verification audits are carried out by one or more private agencies approved by the forestry authorities (hereinafter ‘agency’). Such approval empowers an agency to carry out legality and traceability verification within the LVS. Approval is granted for a fixed and renewable period, following consultation of a multi-stakeholder advisory committee and following an open and transparent process.
In order to obtain approval, an agency must be able to demonstrate the following qualifications:
— |
proven experience in auditing and conformity assessment in forest management, timber processing, timber traceability, transport, logistics, customs, and supply chain management systems; |
— |
good knowledge of national, sub-regional (Economic Community of West African States, ECOWAS) and international trade in timber and timber products and the commercial forestry sector; |
— |
good knowledge of the forest/timber industry in Côte d'Ivoire; |
— |
excellent oral and written communication skills in French; |
— |
proven ability to work with a wide range of stakeholders. |
In addition, the agency must be able to:
— |
demonstrate impartiality and have no conflicts of interest with or illegal stake in forest operators or with the authorities involved in the LVS; |
— |
mobilise qualified and experienced audit staff. |
The main tasks of an agency include:
— |
conducting first-level documentary verification audits; |
— |
conducting second-level documentary verification audits; |
— |
conducting on-the-spot verification audits; |
— |
holding kick-off and closing meetings; |
— |
drafting verification reports and registering them in the data management system. |
Agencies must:
— |
act professionally and with integrity at all times and in all circumstances; |
— |
base their findings on facts and evidence, including those obtained from on-the-spot surveys and documentary analyses; |
— |
consult all stakeholders and in particular those organisations active in independent forest monitoring; |
— |
comply with the procedures and practices laid down in the verification manual (see point 4.2.3) |
The department responsible for forestry legality and traceability of forestry administration supervises the activities of the verification agencies.
4.2.3. Verification manual
A verification audit (hereinafter ‘audit’) comprises a set of legality and traceability verification activities, under an audit contract between an operator and an agency. In order to ensure uniform verification requirements, Côte d'Ivoire draws up, as part of a participatory process, an administrative and technical verification manual (hereinafter ‘verification manual’) listing the verifiers. This verification manual also includes terms of reference and the detailed protocols and verification tools covering the various verification tasks. It is approved by the JIC and published by Côte d'Ivoire.
4.2.4. Audit contract
The operator enters into a contract with an agency, specifying the scope of the verification activities. Legality verification may cover all of the operator's operations or only part of them, as established in an access right permit for the resource (e.g. operations linked to a specific concession). Traceability verification may cover only timber shipments linked to operators, permits and operations of verified legality.
An audit contract between the operator and the agency establishing the scope, cost and conditions of the verification activities is required for such activities to commence. A copy of the audit contract is made available to authorities and the independent auditor via its registration in the data management system. Independent observers may consult the scope, cost and conditions of the verification activities.
4.2.5. Verification plan and activities
Once the verification contract has been signed, the agency draws up a verification plan including appointment of the audit team, the verification programme and the timetable of activities. This plan is sent to the operator and the dates for verification are agreed upon at the kick-off meeting referred to in point 4.2.6.
4.2.6. Kick-off meeting
At the kick-off meeting, the agency examines the objective, scope, timetable and methodology of the audit in the presence of the operator, so as to allow the latter to ask questions regarding how verification activities are conducted. The minutes of the meeting and the verification plan are made available, with the agreement of the operator, to the authorities, the independent observers and the independent auditor via their registration in the data management system.
4.2.7. Audit activities
In order to gather evidence of compliance with the legality requirements laid down in the legality grids in Annex II, the agency carries out checks at several levels:
a) |
first-level documentary verification: checking the presence and conformity of all the documents listed in the verification manual. This includes: (i) verification of the presence of all legality documents in the data management system. Should any documents be missing, the agency asks the operator and, where appropriate, the authority concerned to provide them; (ii) verification of the conformity of the documents, including the conformity of stamps, signatures, dates and other formal elements, and the validity of the information contained in the documents; and (iii) verification of the operator's internal traceability system using the functions of the data management system; |
b) |
second-level documentary verification: on the basis of a risk analysis, the audit includes a thorough verification of the authenticity, conformity and validity of the documents. This thorough documentary verification includes: (i) verification of the authenticity of the documents with the authorities and bodies having issued them; (ii) verification of compliance with the procedure for issuing documents, including the procedure for issuing logging, processing and marketing licences; (iii) thorough verification of the data included in the verifiers, including cross-checks with other documents; and (iv) thorough verification of the operator's internal traceability system; |
c) |
on-the-spot verification: on the basis of a risk analysis, each audit involves one or more on-the-spot inspections to verify whether the presence and compliance of the verifiers actually reflect compliance on the ground with the legality requirements laid down in the definition of legally produced timber given in Annex II. |
The risk analyses referred to in points (b) and (c) are performed by the agency. They take into account the findings of previous verifications (of the same and previous audits), information provided or published as part of independent monitoring, complaints received in the complaint management system, any private certificates and other elements the authorities, the NFGC, the JIC deem relevant for this purpose. This means that the verification activities and timetable agreed upon by the operator and the agency at the kick-off meeting may be supplemented by additional activities and missions based on any elements discovered or communicated after this stage. The verification manual describes in detail how the agency carries out these risk analyses at the various stages of the audit. The department responsible for forest legality and traceability flags in the data management system the data to be taken into account in risk analyses and regularly updates them.
4.2.8. Closing meeting
At the closing meeting, the agency presents to the operator the findings and conclusions of the verification, in particular any problems that may have been identified. The operator has the opportunity to ask questions regarding the verification findings and to provide answers or clarifications on the elements presented by the agency. The minutes of the meeting are made available to the authorities, the independent observers and the independent auditor via their registration in the data management system.
4.2.9. Audit report
The agency draws up an audit report based on the template given in the verification manual. The report includes a description of any findings of non-compliance and a recommended conclusion of compliance or non-compliance in respect of the operations and shipments defined in the audit contract. This provisional audit report is sent to the operator, who may provide clarifications or replies.
Once the operator's replies have been processed, the final report and any comments received from the operator are made available to the authorities, the independent observers and the independent auditor via their registration in the data management system.
4.2.10. Decision-making on legality
The agency's conclusions and recommendations enable the department responsible for forestry legality and traceability to take a decision on compliance or non-compliance, giving the operator a green or red light, as appropriate, in the data management system, according to the scope of the verification carried out (see point 4.2.4).
There are two possible scenarios:
— |
If the operator does not object to the conclusions or recommendations presented in the audit report, the department responsible for forestry legality and traceability makes its decision within a period not exceeding 7 calendar days. If the department responsible for forestry legality and traceability decides to give a red light (non-compliance), the agency and the operator are informed of the reasons underpinning that decision via the data management system. |
— |
If the operator disagrees with the conclusions or recommendations presented in the audit report, or for any other reason deemed relevant by the department responsible for forestry legality and traceability, the latter may decide to extended the deadline for taking its decision. The department responsible for forestry legality and traceability informs of the operator of the extended deadline either via the data management system or in writing within a period not exceeding 7 calendar days. |
Decisions made by the department responsible for forestry legality and traceability may be appealed via the complaint management system described in point 11 (a non-contentious appeal to the department responsible for forestry legality and traceability followed, if necessary, by an appeal to the NFGC).
In cases of non-compliance (red light), once the non-compliance issue has been resolved, the operator may re-contract an agency to conduct a special verification audit to confirm resolution of the non-compliance issue. However, if confirmation of such resolution does not require re-verification on the ground, the department responsible for forestry legality and traceability may provide confirmation without the operator needing to have recourse to a special audit.
Compliance (green light) is valid for a period of one year, after which the operator must commission a new audit, which takes into account the findings of the previous audit.
In the course of its period of validity, compliance may be suspended or cancelled by the department responsible for forestry legality and traceability, if necessary by decision of the NFGC following handling of a complaint. Suspension or cancellation is decided on the basis of new information, complaints, special audits (see point 4.2.12) or other relevant elements. The reasons are communicated to the operator in the data management system. If the data management system is not operational, the operator is informed in writing.
4.2.11. Decision-making on traceability
Since the audit is the only time that the agency can verify the traceability of timber shipments at the various stages of the supply chain, the report gives conclusions and recommendations on the overall traceability of operations valid at the time of the audit.
Once an application for a FLEGT licence has been received, the department responsible for forestry legality and traceability verifies traceability for the shipment covered by the application by means of the data management system and taking into account the agency's report.
The department responsible for forestry legality and traceability may ask the operator for further information or require a special or additional audit as provided for in point 4.2.12.
4.2.12. Special or additional audits
During the period for which legality has been verified, the operators concerned are required to inform the department responsible for forestry legality and traceability of any significant changes in the ownership, structures, management or operations concerned. The department responsible for forestry legality and traceability may ask the operator to carry out a special or additional audit on the basis of this information or of any other elements deemed relevant.
An additional audit corresponds to a new audit as described in points 4.2.4 and 4.2.11, which takes into account the relevant findings of the previous audit. A special audit enables verification of specific points to supplement the findings of a previous audit (carried out less than 12 months before the special audit). A special audit also enables confirmation of the resolution of any cases of non-compliance identified in a previous audit. Therefore, the findings of a special audit are valid only for the remaining duration of the initial audit it supplements. The verification manual contains detailed arrangements for such additional and special audits.
5. Recognition of private and public certificates
With a view to identifying good practices in the forestry sector, private certification schemes that include verification of compliance with applicable legislation may be used as part of the risk assessment procedure.
To this end, Côte d'Ivoire assesses private certification schemes in accordance with LVS requirements and draw up a list of recognised private certification schemes to be taken into account in risk analysis. This list is communicated to the JIC and published on the website of the Ministry of Forestry. The list of recognised schemes is reassessed and, where necessary, updated on a regular basis.
Côte d'Ivoire may develop procedures to allow for a recognised private certification audit, as provided for in the second subparagraph, to also serve as a verification audit. These procedures must be set out in the verification manual.
The legality of imported timber under a FLEGT licence and/or a CITES permit is recognised as of right. Private and public certification schemes may also be used to prove the legal origin of imported timber.
6. Data management system
A centralised national system for documenting, checking and verifying legality and traceability is set up by Côte d'Ivoire.
The data management system is administered by the department responsible for forest legality and traceability. Authorised operators and administrations access the system to record data and documents used to verify legality. Administrations are also authorised to validate data in the system. In specific cases, documents may be submitted or sent to the administration in writing. Where the data management system is not operational, copies of the documents to be registered therein are sent to the administration in writing and made accessible for independent monitoring and independent auditing. When the system is once again operational, the documents concerned are registered as provided for in the verification manual.
Verification agencies may access the data management system with no right of modification to perform the documentary verification tasks within their remit. The agencies may also register the various documents resulting from the verification as provided for in point 4.2.
The independent auditor and civil society organisations involved in the independent monitoring have access to the data management system with no right of modification to consult all important or relevant information, documents and data needed to assess that the LVS is being properly implemented and is effective.
Côte d'Ivoire draws up and publishes the conditions and procedures for obtaining access rights to the data management system and identifies the data that are accessible to the general public.
7. Handling cases of non-compliance
Cases of non-compliance may be identified and addressed at any stage of the verification. Any case of non-compliance identified during the verification is communicated to the operator and, where appropriate, to the department of the administration concerned in order to enable additional elements to be provided and corrective measures to address the case in question.
Cases of non-compliance falling within the remit of the competent State issuing and monitoring services are communicated by the verification agency to the department responsible for forest legality and traceability and to the relevant administrative department in the data management system. A working group in which the various departments of the administrations involved in the LVS are represented helps to handle and resolve cases of non-compliance and may make recommendations to the relevant departments. The department responsible for forestry legality and traceability acts as the secretariat of the working group.
8. Issuing FLEGT licences and legality certificates
A FLEGT licence certifies that timber is legally produced and traced. It is issued after verification that timber to be exported to the Union complies with legality and traceability requirements.
A FLEGT licence is required for all exports of timber, in accordance with the list of products set out in Annex I, to the Member States of the Union. It is issued by a licensing authority designated or established by and under the authority of the Minister for Forestry.
The procedure and technical specifications for issuing FLEGT licences are set out in Annex V.
The legality of timber destined for export markets outside the Union is certified by means of public legality certificates issued by Côte d'Ivoire, following verification of the timber's legality and traceability as laid down in this Annex. A public legality certificate may be issued for timber for domestic consumption following verification in the LVS that the timber has been legally produced.
9. Independent audit
An independent audit assesses the proper implementation and effectiveness of the LVS. It also makes it possible to identify gaps and weaknesses in the implementation of the LVS and make recommendations to the JIC.
Where appropriate, any gaps and weaknesses in the implementation of the LVS identified by the independent auditor is taken into account during the verification process, in particular for risk analyses carried out with a view to establish the need for second-level verification and verification on the ground.
The specifications for the independent audit are set out in Annex VI.
10. Independent monitoring
The LVS includes independent monitoring by civil society organisations. Independent monitoring is a non-State mission monitoring forestry and agroforestry activities. This is provided for by Côte d'Ivoire legislation and carried out by civil society organisations with the aim of collecting and sharing reliable and verifiable information on forest management for the purpose of improving forest governance. It is therefore carried out either on a permanent basis or during a term of office. Consequently, independent monitoring may be external or mandated.
In the context of the LVS, independent monitoring covers in particular the following activities:
— |
organising autonomous independent monitoring missions, |
— |
participation as an observer in control missions and verification audits on the ground, |
— |
identifying malfunctions, indicia, infringements of regulations applicable to forestry activities, and drawing up independent monitoring reports, and |
— |
alerting stakeholders of any detected illegal activities. |
Organisations carrying out independent monitoring activities have access to the data management system.
Independent monitoring reports are registered in the data management system and are taken into account in the verification process, in particular for risk analyses used to identify the need for second-level verification and verification on the ground, as well as special or additional auditing needs.
Organisations carrying out independent monitoring activities may accompany audit missions, at their own expense. They must respect trade secrecy on such missions.
Independent monitoring missions cover operators and their activities as well as the functioning of the competent State bodies (in particular with regard to the issuing documentation and the execution of checks) and the activities of verification agencies.
11. Complaint management system
The LVS provides for the possibility for the various actors involved to submit complaints concerning checks and verification of legality and traceability as well as FLEGT licencing.
The LVS complaints management system is a mechanism for preventing and resolving, through dialogue, conflicts and disputes related to verification of timber legality. As such, it enables LVS stakeholders to file complaints, claims, grievances or any other type of assertion of a right with the relevant bodies.
The bodies responsible for managing complaints are the department responsible for forest legality and traceability and the NFGC.
As regards complaint management, the tasks of the department responsible for forest legality and traceability are to:
— |
receive and register complaints and comments, whether lodged orally or in writing and entered in the complaints register of the data management system; |
— |
handle the administrative review if the complaint concerns a decision taken by the department itself; |
— |
carry out any necessary research, collection of information or consultation; |
— |
make recommendations to the NFGC; |
— |
prepare and transmit periodic complaint handling and management reports to the NFGC; and |
— |
ensure that solutions to complaints are implemented by a set deadline. |
In terms of complaint management, the tasks of the NFGC are to:
— |
provide the necessary guidance and guidelines for the implementation of the complaint management system; |
— |
monitor and assess the implementation of the complaints management system; |
— |
handle appeals against decisions taken by the department responsible for forest legality and traceability following an unsuccessful administrative review; and |
— |
prepare and submit regular complaint handling and management reports to the JIC. |
In order to ensure wide accessibility to the complaint management system, complaints may be filed anonymously. It is also possible for civil society organisations, the traditional authorities and trade unions to submit a complaint on behalf of local communities or workers respectively.
The procedure for managing complaints, including deadlines for review and appeal, is specified in the verification manual.
ANNEX IV
CONDITIONS GOVERNING THE RELEASE FOR FREE CIRCULATION IN THE UNION OF TIMBER AND TIMBER PRODUCTS EXPORTED FROM CÔTE D'IVOIRE UNDER A FLEGT LICENCE
1. General framework
The legal basis of the provisions laid down in this Annex is Commission Regulation (EC) No 2173/2005 and Regulation (EC) No 1024/2008 of 17 October 2008 laying down detailed measures for the implementation of Council Regulation (EC) No 2173/2005 (1), which govern the conditions for the entry into the Union market of timber and timber products covered by a FLEGT licence from a partner country.
2. Handling FLEGT licences
The FLEGT licence is communicated to the competent authorities of the Member State of the Union in which the consignment covered by that licence is declared for release for free circulation. This may be done electronically or by any other expeditious means.
The competent authorities referred to in the first subparagraph inform the customs authorities, in accordance with the applicable national procedures, as soon as a FLEGT licence has been accepted.
3. Documentary checks of FLEGT licences
FLEGT licences in paper format must conform to the template set out in Appendix 1 to Annex V. A FLEGT licence that does not meet the requirements and specifications set out in Annex V is invalid.
A FLEGT licence is considered void if it is lodged after the expiry date indicated on the licence.
A FLEGT licence may not contain any alterations or overwriting.
No extension of the validity of a FLEGT licence is accepted without prior approval by the licensing authority.
No duplicate or replacement licence is accepted unless it has been issued and validated by the licensing authority.
4. Requests for additional information
Where there are doubts as to the validity or authenticity of a FLEGT licence, or a duplicate or replacement FLEGT licence, the competent authorities may request additional information from the licensing authority.
A copy of the FLEGT licence, duplicate or replacement FLEGT licence in question may be sent together with the request.
5. Verifying the conformity of the FLEGT licence with the consignment
If further verification of the shipment is considered necessary before the competent authorities can decide whether a FLEGT license may be accepted, checks may be carried out to establish whether the consignment in question conforms to the information provided in the FLEGT license and to the records relating to the relevant FLEGT license held by the licensing authority.
Where the volume or weight of the timber products contained in the consignment presented for release for free circulation does not deviate by more than 10 % from the volume or weight indicated in the corresponding FLEGT licence, the consignment is considered to conform to the information provided in the FLEGT licence as far as volume or weight is concerned.
Where there are doubts as to whether the shipment conforms with the FLEGT licence, the competent authority concerned may seek further clarification from the licensing authority.
The licensing authority may request the competent authority to send a copy of the FLEGT license or the replacement in question.
Where necessary, the licensing authority withdraws the FLEGT licence and issues a corrected version in accordance with Annex V.
If the competent authority receives no answer within 21 calendar days of the request for further clarification, the competent authority rejects the FLEGT licence and acts in accordance with the applicable legislation and procedures.
A FLEGT licence cannot be accepted if it has been established (where necessary after provision of additional information in accordance with point 4 or a further investigation in accordance with this point) that the FLEGT licence does not correspond to the consignment.
6. Verification before arrival of the consignment
A FLEGT licence may be submitted before the arrival of the corresponding consignment.
The FLEGT licence is accepted if it meets all the requirements set out in Annex V and no additional verifications are considered necessary in accordance with points 4 and 5 of this Annex.
7. Other issues
Any verification-related costs are borne by the importer, unless otherwise provided for by the legislation and procedures of the Member State of the Union concerned.
Where persistent disagreements or difficulties arise from the verification of FLEGT licences, the matter may be referred to the JIC, informing the licensing authority thereof.
8. Release for free circulation
The number of the FLEGT licence covering the timber and timber products covered by the declaration appears in box 44 of the single administrative document containing the customs declaration for release for free circulation.
Where the customs declaration is made electronically, the reference is provided in the relevant box.
Timber and timber products can be released for free circulation only after completion of the procedures set out in this Annex.
ANNEX V
FLEGT LICENSING PROCEDURE AND TECHNICAL SPECIFICATIONS
1. General requirements relating to FLEGT licences
In accordance with Article 6 of this Agreement, FLEGT licences certify that timber and timber products are legally produced and have been traced in accordance with the provisions of Annex III.
A FLEGT licence is required for all exports to the Member States of the Union for timber and timber products that are contained in the list of products set out in Annex I. For other countries, a public certificate certifying the legality and traceability of the timber is issued in accordance with the requirements of the LVS.
A FLEGT licence is issued for a single consignment of a single exporter to a single point of entry into the Union.
Detailed requirements and procedures for issuing, renewing or extending the validity, withdrawal, replacement and management of FLEGT licences are laid down in the verification manual referred to in point 4.2.3 of Annex III.
2. Licensing authority
The licensing authority falls under the responsibility of the Ministry of Forestry.
The composition, powers and functioning of the licensing authority are defined by a regulatory text.
The licensing authority is the competent service for the exchange of information between Côte d'Ivoire and the competent authorities on matters relating to FLEGT licences.
3. Procedure for issuing FLEGT licences
The FLEGT licence is issued after verification of the legal compliance and traceability of the timber and timber products to be exported, as set out in Annex III.
The procedure for issuing a FLEGT licence is as follows:
— |
Step 1 — Receipt of the application: The exporter completes and submits a FLEGT licence application using the form established by the licensing authority. |
— |
Step 2 — Examination of the application: The licensing authority ensures that the compliance of the timber and timber products to be exported has been verified in accordance with Annex III. |
— |
Step 3 — Decision to issue the authorisation
|
FLEGT licence applications are submitted and processed electronically through the data management system. However, in the event of a malfunction of the data management system, they may be submitted and processed manually. In that case, the application for a FLEGT licence must be accompanied by a certificate of legality and traceability issued by the department responsible for forest legality and traceability in accordance with the procedures described in Annex III.
The licensing authority may withdraw any FLEGT licence containing an error and issue a corrected licence marked Corrected Authorisation, stamped and signed by the licensing authority.
The issuing of a FLEGT licence is subject to the payment of a fee, the amount of which and the manner in which it is paid is established in a regulatory text.
4. General specifications of FLEGT licences
A FLEGT licence may be issued in either paper or electronic format.
The FLEGT licence contains the information set out in Appendix 1, in accordance with the explanatory notes provided in Appendix 2.
For complex shipments for which it is not possible to include all the required information referred to in the first template in Appendix 1, an attachment entitled ‘ Additional description of goods attached to the FLEGT licence ’ is added. The attachment includes qualitative and quantitative information on the description of the shipment, as specified in Appendix 1. In that case, the corresponding boxes in the licence do not include information on the shipment, but a reference to the attachment.
The FLEGT licence is valid starting from the issuing date thereof.
The FLEGT licence is valid for 6 months and may be extended for a maximum of 3 months. The expiry date is indicated on the FLEGT licence.
Following its expiry, the licence is considered as void.
Where the timber and timber products covered by a FLEGT licence have been destroyed, the licence ceases to be valid and the operator informs the licensing authority accordingly.
5. Technical specifications for FLEGT licences in paper format
Paper-based FLEGT licences must conform to the format set out in Appendix 1.
The FLEGT licence is issued in A4 format.
The FLEGT licence is issued in six copies, each marked as follows:
— |
a copy marked ORIGINAL for the competent authority of the Member State of the Union in which the shipment covered by that licence is declared for release for free circulation, |
— |
a copy marked CUSTOMS AUTHORITY OF THE EUROPEAN UNION for the customs authority of the Union, |
— |
a copy marked EXPORTER for the FLEGT licence applicant, |
— |
a copy marked CÔTE D'IVOIRE CUSTOMS AUTHORITY for the customs authority of Côte d'Ivoire, |
— |
a copy marked FLEGT LICENCE ISSUING AUTHORITY to be kept by the licensing authority, and |
— |
a copy marked ARCHIVES for the archives kept by the Ministry of Forestry of Côte d'Ivoire. |
The FLEGT licences are filled in using either a typewriter or a computer. They may be filled in by hand, if necessary. The quantities are entered by the licensing authority in such a way as to make it impossible to insert additional figures or details.
Each copy of the authorisation is dry stamped and signed by the licensing authority.
The FLEGT licence displays a reference number and a bar code. It may not contain any alterations or overwriting.
FLEGT licence forms are printed out and filled in in French.
With the exception of the copies the Ministry of Forestry and the licensing authority for filing purposes, all other copies are given to the applicant, who keeps their copy and sends the others to the relevant recipients.
6. Lost or destroyed FLEGT licences
In the event of loss or destruction of one of the copies listed in point 5, third subparagraph the exporter or their authorised representative may request the licensing authority to issue a replacement FLEGT licence. The FLEGT licence holder or their authorised representative attaches to their application a declaration of loss of the copy in question issued by the National Police or the National Gendarmerie of Côte d'Ivoire.
The FLEGT licensing authority issues the replacement FLEGT licence or licences within 48 hours of receipt of the exporter's request.
Replacement FLEGT licenses contain the information and data appearing on the original FLEGT licence, including the licence number.
Replacement FLEGT licences are marked Alternative Licence, stamped and signed by the licensing authority.
Issuance of a replacement FLEGT licence renders the original licence null and void. Where the lost or stolen document is found, it must be destroyed or returned to the licensing authority.
7. Doubts concerning validity of the FLEGT licence
Where there are doubts as to the validity or authenticity of a FLEGT license or a FLEGT replacement license, the competent authorities may request additional verification from the licensing authority.
Where the licensing authority deems it necessary, it may ask the competent authorities to send a copy of the FLEGT license or the replacement FLEGT licence in question.
Where the licensing authority deems it necessary, it withdraws the FLEGT licence and issue a corrected copy marked Corrected Licence, stamped and signed by the licensing authority, and forward it to the competent authorities.
Where the validity of the FLEGT licence is confirmed, the licensing authority informs the competent authorities accordingly, preferably by electronic means, and returns the copies of the FLEGT licence. The returned copies are marked Validated on …, stamped and signed by the licensing authority.
Where the FLEGT licence in question is not valid, the licensing authority informs the competent authorities, preferably by electronic means.
8. Technical specifications with regard to computerised FLEGT licences
The FLEGT licence may be issued and used by means of computerised systems.
In Member States of the Union that are not connected to a computerised system, a paper-based licence is made available.
9. Terminology
For the purposes of Côte d'Ivoire, the following terms are defined as follows:
a) |
‘commercial description of timber or timber products’: description of the nature of the products, |
b) |
‘means of transport’: mode of transport from the point of export: ‘maritime’/‘air’/‘land’, |
c) |
‘common and scientific names’: the common trade names and scientific names of the categories of timber used in the product. It is not advisable to use the vernacular name if it is not usually recognised in international trade, |
d) |
‘country of harvest’: country where the timber and timber products concerned are harvested. |
Appendices
1. |
FLEGT licence template and template of the additional description of goods attached to the FLEGT licence |
2. |
Explanatory notes |
Appendix 1
FLEGT licence template
Coats of arms and logos of the Côte d'Ivoire
European Union |
|
FLEGT |
|||||||||||
1 |
|
|
|||||||||||
ORIGINAL |
|||||||||||||
|
|
||||||||||||
|
|
||||||||||||
|
|||||||||||||
|
|||||||||||||
|
|
||||||||||||
1 |
|||||||||||||
|
|
|
|
||||||||||
|
|
|
|
||||||||||
|
|
||||||||||||
|
|
Template of the additional description of goods attached to the FLEGT licence
Addition description of goods attached to the FLEGT licence |
||||||||
FLEGT licence number: |
||||||||
Item # |
Commercial description of timber or timber products |
SH code |
Common and scientific names |
Country of harvest |
ISO code of country of harvest |
Volume (m3) |
Net weight (kg) |
Number of units |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signature and stamp of the FLEGT licencing authority Place: Date: |
Appendix 2
Explanatory notes
General information
— |
Complete in capital letters. |
— |
When mentioned, ISO codes refer to the two-letter international standard country code. |
— |
The terms ‘European Union’ and ‘FLEGT’ indicate that the licence covers a shipment to the Union. |
— |
The word ORIGINAL is replaced by one of the following, depending on the addressee of the copy: ‘CUSTOMS AUTHORITY OF THE EUROPEAN UNION’, ‘EXPORTER’, ‘CUSTOMS AUTHORITY OF THE CÔTE D'IVOIRE’, ‘FLEGT LICENSING AUTHORITY’ or ‘ARCHIVES’. |
Box 1 |
Licensing authority |
Indicate the full name and address of the licensing authority. |
Box 2 |
Importer |
Indicate the full name and address of the importer. |
Box 3 |
FLEGT licence number |
Indicate the licence number. |
Box 4 |
Date of expiry |
Indicate the licence date of expiry. |
Box 5 |
Country of export |
Indicate the partner country from where the timber and timber products were exported to the Union. |
Box 6 |
ISO code |
Indicate the two-letter code for the partner country referred to in box 5. |
Box 7 |
Means of transport |
Indicate the mode of transport from the point of export. |
Box 8 |
FLEGT licence holder |
Indicate the name and address of the exporter. |
Box 9 |
Commercial description |
Indicate the nature of the product. |
Box 10 |
HS heading and description |
Indicate the four-digit or six-digit commodity code established pursuant to the Harmonised Commodity Description and Coding System. |
Box 11 |
Common and scientific names |
Indicate the common and scientific names of the timber category used in the product. If more than one category is used in the product, use a separate line for each. This may be omitted for a composite product or component that contains multiple unidentifiable categories (e.g. particle board). |
Box 12 |
Country of harvest |
Indicate the countries where the categories of timber referred to in box 10 were harvested. If more than one category is used in the product, indicate the country of harvest of each timber category used. This may be omitted for a composite product or component that contains multiple unidentifiable categories (e.g. particle board). |
Box 13 |
ISO codes |
Indicate the ISO code of the countries referred to in box 12. This may be omitted for a composite product or component that contains multiple unidentifiable categories (e.g. particle board). |
Box 14 |
Volume (m3) |
Indicate the overall volume in m3. Optional unless the information referred to in box 15 has been omitted. |
Box 15 |
Net weight (kg) |
Indicate the total weight in kg, i.e. the net mass of the timber or timber products without immediate containers or any packaging other than bearers, spacers, stickers, etc. Optional unless the information referred to in box 14 has been omitted. |
Box 16 |
Number of units |
Indicate the number of units, where a manufactured product is best quantified in this way. Optional. |
Box 17 |
Distinctive marks |
Indicate any distinctive marks where appropriate, e.g. lot number or bill-of-lading number. Optional. |
Box 18 |
Licensing authority's stamp and signature |
The box must be signed by the authorised official and carry the licensing authority's official stamp. The place and date must also be indicated. |
ANNEX VI
INDEPENDENT AUDITOR SPECIFICATIONS
1. Principles
The independent audit is executed in accordance with Article 10 of this Agreement. The independent audit covers the LVS, which ensures that products listed in Annex I that are harvested, transported, processed, exported, imported or sold comply with legality and traceability criteria. The LVS also ensures that the licensing authority issues licences only for shipments which comply with its requirements.
The specifications covered by this Annex set out the objectives, tasks and method of the independent audit, as well as the arrangements for drawing up the independent auditor's reports. This Annex also sets out the main sources of information and commits the Parties to support and facilitate the independent auditor's activities, in particular as regards access to information. The specifications set out the qualifications and experience required and provide the basis for the preparation of more detailed tender documents when recruiting the independent auditor.
2. Objectives
The objective of the independent audit is to assess the proper implementation and effectiveness of the LVS.
3. Tasks
The tasks of the independent auditor should include, but are not limited to, the following:
a) |
develop an audit manual detailing all audit operations, including the methods and tools for gathering information, the assessment of relevant data and the production of reports. The audit manual also indicates how complaints are managed and the procedures for ensuring the independence and confidentiality of auditors' work; |
b) |
audit the LVS: the independent auditor ensures that the LVS operates effectively and in accordance with the requirements laid down in this Agreement. More specifically, the audit covers the following:
|
c) |
identify any gaps and weaknesses during implementation (1) and in the operational phase (2) of the LVS and to make recommendations to the JIC; |
d) |
assess the implementation of corrective measures adopted by the JIC to address any gaps and weaknesses identified in the control and verification reports; |
e) |
report on the findings and make recommendations to the JIC, which regularly publishes a summary of those reports; |
f) |
carry out any other study requested by the JIC to further substantiate the independent audit. |
4. Method
The independent auditor must:
— |
act professionally and with integrity at all times and in all circumstances; |
— |
observe national and international best practices by following ISO 19011 (3) and 17021 (4) or equivalent standards; |
— |
base their findings on facts and evidence, including those obtained from on-the-spot surveys and documentary audits; |
— |
consult all stakeholders and in particular those organisations active in independent forest monitoring. |
The JIC reviews and approves the audit manual referred to in point 3 as proposed by the independent auditor before the latter can launch the audit in accordance with the approved manual.
4.1. Work schedule
During the first year of implementation of the LVS, the independent auditor prepares and submits to the JIC the audit manual and an audit plan and carries out an initial audit. During that initial audit, the independent auditor must organise a kick-off meeting during which they ensure that the various stakeholder groups (civil society, traditional authorities, private sector, ministries and other government bodies) have a common understanding of their mandate. The meeting is also an opportunity to gather participants' expectations and recommendations in relation to the initial audit exercise. In subsequent years, the independent auditor carries out annual audits for a period of at least four years. Thereafter, this frequency is reviewed by the JIC. Upon request of the Parties and with the JIC's prior approval, the independent auditor may also carry out unannounced and ad hoc audits.
At the end of each audit, the independent auditor calls a meeting with the various stakeholders to report on the findings. The meeting is an opportunity to present the summary report approved by the JIC.
4.2. Scope of work
The activities of the independent auditor covers all the tasks listed in point 3 in accordance with the audit manual.
During the implementation of this Agreement and before the LVS is fully operational, the independent audit may cover parts thereof as identified by the JIC.
In the operational phase, the independent audit covers all verification-related activities: the legality and traceability verification system, the FLEGT licensing system, the LVS non-compliance management system, and the activities of the FLEGT licensing and verification bodies.
In order to determine whether verification actually identifies possible cases of non-compliance at check level and on the ground, the independent auditor also audits the relevant activities of:
— |
the authorities responsible for issuing logging, processing and marketing licences; |
— |
the authorities responsible for legality and traceability checks; |
— |
loggers, processors, importers, exporters and traders. |
The independent auditor selects the relevant activities on the basis of a risk analysis and, where appropriate, taking into account the priorities identified by the JIC.
4.3. Data acquisition and processing
The audit manual must lay down the procedures and practices of evidence gathering, including audits on the ground, investigations, interviews and review of documentation. It must also lay down how the independent auditor responds to complaints about their own work. The data collected are processed objectively (on the basis of a legal analysis, control of the data management system, in compliance with the ethical rules applicable to the management of such data, etc.).
4.4. Audit systems
On the basis of the audit findings and documented and filed evidence which has been obtained through documentary reviews, interviews, site visits and data collection, the independent auditor identifies:
— |
cases of non-compliance detected during the legality and traceability verification and any corrective measure needed to address those cases; |
— |
the strengths and weaknesses of the LVS (to be considered as opportunities for improvement), which will make it possible to target measures aimed at improving the functioning and effectiveness of the LVS. |
4.5. Adequate resources and authorisations
The independent auditor has sufficient resources and the necessary authorisations to carry out their work.
4.6. Documented management system
The independent auditor has an adequate documented management system in place to ensure that their staff have the necessary skills and experience to carry out an effective audit and to apply the necessary internal checks and monitoring.
5. Reports and dissemination
As agreed with the JIC, the independent auditor drafts their reports according to the framework and approach set out in the audit manual. The independent auditor also:
— |
reports on activities in line with the timeline agreed with the JIC; |
— |
drafts and submits an audit manual and an audit plan to be approved by the JIC before the audit is carried out; |
— |
drafts its reports according to internationally recognised audit principles and as specified in the audit manual; |
— |
submits a preliminary report to the JIC for comments; |
— |
submits a final report to the JIC (based on the comments received on the preliminary report and the evidence gathered), containing all relevant information on the audit programme and the functioning of the LVS; |
— |
drafts a summary report, which the JIC validates for dissemination to the general public. The summary report is based on the full report and summarises its main recommendations and conclusions, including any identified weaknesses and strengths of the LVS. |
6. Means and sources of information
The main means of access to information include:
— |
examination of documents and records (reports, plans, registers, forms, binders, fiches, websites, databases and others); |
— |
visits on the ground; |
— |
interviews with persons involved in the LVS and other persons with expertise in the field; |
— |
consultations and meetings with relevant stakeholders. |
For on-the-spot visits, the independent auditor has access to areas where forest resources are exploited, transported, processed and sold, as well as to points of import and export.
Côte d'Ivoire ensures that the independent auditor has full access to all information, documents and databases that are important or relevant for assessing the proper implementation and effectiveness of the LVS. Where there are doubts as to the importance, relevance or confidentiality of information for the independent audit, the matter is referred to the JIC. Access to information includes information held by the Ministry of Forestry as well as information held by other ministries and government bodies involved in the LVS. In particular, the independent auditor has access to information from the LVS and its components and other sources, such as audits published by other countries that have established a FLEGT licensing scheme.
Stakeholders who might provide relevant information are:
a) |
State actors:
|
b) |
non-State actors:
|
7. Requirements
a) |
The independent auditor must be able to demonstrate the following:
|
b) |
The independent auditor must also:
|
c) |
The independent must also:
|
8. Selection process and institutional arrangements
The tender process is open to all institutions having the relevant capacities, including non-profit organisations, academic institutions and research centres.
Bids are assessed in a transparent manner and the criteria applied are made public. The selection process of the independent auditor includes due diligence regarding bidding entities, in accordance with JIC's rules. The bid evaluation report is published.
During the recruitment of the independent auditor, the more detailed tender documents prepared on the basis of this Annex are subject to approval by the JIC. Côte d'Ivoire finalises the recruitment of the independent auditor following the JIC's non-objection opinion.
9. Financing the independent audit
The Parties subsequently agree on the mechanism for financing the independent audit while ensuring its independence.
(1) For the purpose of this Agreement, ‘implementation’ means the construction phase of the LVS.
(2) For the purpose of this Agreement, ‘operational phase’ means the phase following validation of the LVS.
(3) Guidelines for the audit of management systems.
(4) Requirements for bodies carrying out audit and certification of management systems.
(5) Quality management systems.
ANNEX VII
CRITERIA FOR THE INDEPENDENT ASSESSMENT OF THE LEGALITY VERIFICATION SYSTEM (LVS)
1. General provisions
The LVS of Côte d'Ivoire aims to ensure the legality of timber and timber products. The LVS is subject to an independent assessment before the entry into force of the FLEGT licensing scheme for exports of timber and timber products from Côte d'Ivoire to the Union. This Annex lays down the criteria for the independent assessment of the system in accordance with Article 12 of this Agreement. Its purpose is to determine the proper functioning and credibility of the LVS to enable the Parties to agree on the launch of the operational phase of the FLEGT licensing scheme. The independent assessment is therefore different from the independent audit. Whilst the independent audit is a permanent function in the implementation of this Agreement, the independent assessment takes place only before the launch of the FLEGT licensing scheme.
2. Purpose of the assessment
To support decision-making by the Parties on the launch of the operational phase of the FLEGT licensing scheme, the assessment covers:
— |
the functioning, credibility and effectiveness of the LVS; |
— |
possible revisions of the LVS made following the signing of this Agreement; |
— |
the ability of the actors involved in the LVS to fulfil their role, each within their remit, as provided for in this Agreement and its Annexes. |
3. Assessment implementation method
The LVS is assessed using a step-by-step approach. The gaps and weaknesses of the system identified during the assessment are progressively addressed through the planned implementation of corrective measures, as agreed by the Parties at a meeting of the JIC, to a level considered satisfactory by the Parties.
The assessment of the LVS takes into account previous independent audits carried out on the parts of the LVS specified by the JIC, as set out in Annex VI.
The mandate and the specifications of the independent assessment are the subject of an agreement between Côte d'Ivoire and the Union at a meeting of the JIC. The assessment criteria set out in this Annex form the basis for the mandate and the specifications.
4. Assessment criteria
4.1. Definition of legally produced timber
Legally produced timber is defined in Articles 1 and 7 and Annex II to this Agreement. This definition is supplemented by the verification manual, which identifies verifiers. The definition of legally produced timber is clear, objectively verifiable and applicable in operational terms. It refers at least to the relevant provisions in the following areas:
— |
harvesting rights: allocation of forest concessions and other access rights for timber harvesting within legally defined limits, |
— |
forestry operations: compliance with legal and technical requirements for forest management and the conduct of forestry operations, including compliance with applicable social and environmental legislation, |
— |
fees and taxes: compliance with legal requirements on taxes, fees and any other revenue systems directly related to timber harvesting and harvesting rights, |
— |
other users: respect for other parties' legal tenure or rights of use of land and resources that may be affected by timber harvesting rights, where such other rights exist, |
— |
trade and customs: compliance with legal requirements for trade and customs procedures. |
The key questions that the assessment addresses in this area are:
— |
Is the legal basis of the definition of legally produced timber clearly identified? |
— |
Are the legal instruments underpinning each element of the definition of legally produced timber clearly identifiable? |
— |
Are the principles, criteria and indicators that can be used to verify compliance with each element of legally produced timber clearly set out? |
— |
Are the verifiers used to verify compliance with the principles, criteria and indicators of the definition of legally produced timber based on documented legal references? |
— |
Are the verifiers clear, objective and operationally applicable? Are they appropriate and adequate to confirm compliance with the indicator? |
— |
Does the definition of legally produced timber cover the main legal requirements of the legislation in force in the areas identified in the first subparagraph? |
Where the definition of legally produced timber is amended after the entry into force of this Agreement, the main complementary questions are the following:
— |
Have relevant stakeholders been consulted on the amendments and have their recommendations been taken into account? |
— |
Is the specific legislation applicable to each new element of the definition of legally produced timber clearly identified? |
— |
Are the verifiers for possible amendments to the definition of legally produced timber clearly identified? |
— |
Have the amendments been made in accordance with this Agreement? |
4.2. Scope of the LVS
The LVS covers the products identified in Annex I and the timber sources described in point 3.1 of Annex III. Before the entry into force of the FLEGT licensing scheme for exports of timber from Côte d'Ivoire to the Union, the LVS makes it possible, at least, to verify that timber products intended to be shipped to or placed on the Union market have been legally produced.
The key questions that the assessment addresses in this area are:
— |
Are all products falling within the scope of this Agreement as listed in Annex I covered by the LVS? |
— |
Are the various sources of timber referred to in point 3.1 of Annex III to this Agreement covered by the LVS? |
— |
Is timber from deforestation and clearing as well as seized timber identified along the supply chain covered by the LVS and excluded from FLEGT licensing? |
— |
Is imported timber in transit and finished timber products separated from the supply chain and excluded from the FLEGT licensing? |
— |
Can the actors involved in the LVS play their role, as provided for in this Agreement and its Annexes? |
4.3. Checks
Legality checks aim to ensure that operators are legally constituted and approved and that the activities carried out throughout the timber industry are legal. Traceability checks aim to trace the route of the timber from the logging site to the point of marketing and/or export, while ensuring that the supply chain is watertight.
This level covers the usual checks carried out by the relevant State bodies in accordance with the legal framework and the manuals of procedure. These checks therefore target all the operators in the sector: operators, processors, importers, exporters and traders.
The purpose of the assessment is then to ensure that legality and traceability checks, as carried out, are based on clear, detailed and accessible procedures and that they are carried out in a way that enables legality and traceability to be verified. In order to determine whether verification actually detects possible cases of non-compliance during checks and on the ground, the assessment also covers the relevant activities of:
— |
the authorities responsible for issuing logging, processing and marketing licences; |
— |
the authorities responsible for legality and traceability checks; |
— |
loggers, processors, importers, exporters and traders. |
The evaluator selects the relevant activities on the basis of a risk analysis and, where appropriate, taking into account the priorities identified by the JIC.
The key questions that the assessment addresses in this area are:
— |
Are the procedures for checking legality and traceability clearly established by the relevant administrations? |
— |
Are verifiers issued on a regular basis? |
— |
Are verifiers filed by all relevant or competent actors in a timely manner and in a format that enables them to be verified? |
— |
Are critical checkpoints in the supply chain identified and described in such a way as to enable verification of the traceability of timber and timber products? |
— |
Are quantitative data registered in a way so as to enable them to be reconciled with the previous and subsequent critical checkpoints of the supply chain in a timely manner? |
— |
Are all manuals, guidelines and other administrative documents containing the control procedures carried out by the various administrations publicly available? |
4.4. Verification
The verification stage is in addition to the check stage and aims to ensure the legality and traceability of timber and timber products. Verification therefore targets not only operators but also the State bodies responsible for issuing documentation and conducting checks.
The assessment aims to ensure that the legality and traceability checks carried out are sufficiently rigorous to effectively detect any non-compliance with the requirements of the LVS and ensure that no timber of illegal or unknown origin enters the supply chain or is exported to the Union.
The key questions that the assessment addresses in this area are:
— |
Is the NFGC set up and capable of steering the implementation of the LVS and ensuring its functions in the LVS complaint management system? |
— |
Has the department responsible for forest legality and traceability been designated by the forestry administration and it is able to assist the NFGC and perform the functions assigned to it under this Agreement? |
— |
Has the forestry administration approved one or more agencies to carry out verification activities in an open, transparent process in compliance with the requirements set out in Annex III? |
— |
Has the verification manual been drafted by means of a participatory process, approved by the JIC and published by Côte d'Ivoire? Does it make it possible to ensure uniform verification requirements as provided for in Annex III? |
— |
Are the roles and responsibilities of all relevant stakeholders and verification bodies clearly identified for each indicator and verifier? |
— |
Can the verification agencies carry out verification audits as required by Annex III and the verification manual? |
— |
Is the risk analysis on the basis of which the verification agencies identify the need for second-level verification and checks on the ground defined in the verification manual following comprehensive and practical procedures? |
— |
Do the audit reports of verification agencies supplemented by other data in the data management system enable the department responsible for forest legality and traceability to adopt compliance or non-compliance decisions on legality and traceability? |
— |
Are the procedures for the recognition of private certificates, if any, operational and covered by the verification manual? |
— |
Is the data management system in place, operational and compliant with the requirements set out in Annex III? |
— |
Have the conditions and procedures for obtaining access rights to the data management system and identify the data that are accessible to the general public been drawn up and published? Do the actors involved in the LVS have appropriate access to the data management system as well as modification rights? |
— |
Are cases of non-compliance identified during verification communicated so as to enable additional elements to be requested and corrective measures to be taken to address them? |
— |
Has the working group in which the various departments of the administrations concerned by the LVS are represented and whose task is to help handle and resolve cases of non-compliance and make recommendations to that effect to the departments concerned been established? Can it carry out the functions assigned to it in Annex III? |
— |
Does the system for managing cases of non-compliance ensure that timber of illegal or unknown origin does not enter the supply chain to the Union? |
4.5. Issuing licences and certificates
Côte d'Ivoire has entrusted the responsibilities related to FLEGT licences and public legality certificates to the licensing authority. A FLEGT licence is issued for each shipment exported to the Union, while a public legality certificate is issued for each shipment destined to export markets other than those of the Union.
The key questions that the assessment addresses in this area are the following:
— |
Has the licensing authority been designated or established by the Minister for Forestry? |
— |
Has the licensing authority established FLEGT licensing procedures? Are those procedures, including applicable fees, publicly available? |
— |
Does the licensing authority issue FLEGT licences only for timber and timber products that have been verified and considered legal as provided for in this Agreement? |
— |
Are the complete registers of granted and refused FLEGT licences and public legality certificates kept? |
— |
Are FLEGT licensing requirements clearly defined and communicated to exporters and relevant stakeholders? |
— |
Do the procedures established for the licensing authority enable the relevant authorities to obtain clarifications regarding FLEGT licences issued in Côte d'Ivoire? |
4.6. Independent monitoring and transparency
The LVS integrates the independent monitoring conducted by civil society organisations to collect and share reliable and verifiable information on forest management for the improvement of forest governance and the functioning of the LVS.
The key questions that the assessment addresses in this area are:
— |
Can civil society organisations conducting independent monitoring carry out this task as provided for in this Agreement, in particular Annex III? |
— |
Are independent monitoring reports entered in the data management system and taken into account in the verification process, in particular for risk analysis? |
— |
May organisations conducting independent monitoring activities accompany verification audit missions carried out by verification bodies, while respecting trade secrecy? |
— |
Is access to documents provided for in this Agreement, in particular Annex IX, guaranteed? |
4.7. Complaint management mechanism
There is an adequate mechanism for managing complaints and disputes arising from the implementation of the LVS. This mechanism makes it possible to handle any complaint relating to the LVS.
The key questions that the assessment addresses in this area are:
— |
Is the complaint management mechanism described, in place and known to all stakeholders? |
— |
Does the complaint management mechanism allow the various actors involved in the LVS to submit complaints concerning checks, legality verification, traceability and the issuing FLEGT licences? |
— |
Is the complaint management mechanism operational and reliable? |
5. Appointment, profile and tasks of the independent evaluator
The independent assessment is conducted by an independent body designated by Côte d'Ivoire on the basis of a transparent and competitive selection procedure, following the JIC's non-objection opinion.
The independent evaluator must demonstrate the following:
— |
proven experience in conformity assessments in the field of forest management, timber processing, timber traceability, customs, and supply chain management systems, |
— |
good knowledge of the timber industry in Côte d'Ivoire, |
— |
good knowledge of the FLEGT action plan and of the negotiation and implementation processes of voluntary partnership agreements, |
— |
proven ability to work with a wide range of stakeholders, |
— |
good knowledge of ISO 19011 and 17021 or equivalent standards. |
The independent evaluator must also:
— |
be appointed by means of a transparent procedure; |
— |
be appointed in accordance with criteria that are clear and publicly available; |
— |
be independent and neutral; |
— |
have no conflict of interest arising from any organisational or commercial relationship, as required by ISO 19011, ISO 17021 or equivalent standards; |
— |
have no direct interests in forest management, timber processing, timber trade or forestry administration or in any other LVS-related business sector; |
— |
not be part of the licensing authority or control bodies; and |
— |
have a quality-control system for their work and demonstrate relevant experience in carrying out similar work. |
The main tasks of the independent evaluator are:
— |
to mobilise qualified and experienced audit staff with excellent oral and written communication skills in French; |
— |
to draw up a manual of procedures setting out each phase of the assessment, including methods and tools for gathering information, assessing relevant data and producing reports. The manual of procedures also indicates how complaints are received and managed and the procedures for ensuring the independence and confidentiality of the work of their staff; |
— |
to submit the manual of procedures and the timetable for its activities for approval by the JIC prior to launching the assessment; |
— |
to conduct the assessment according to the criteria and requirements set out in this Annex; and |
— |
to determine whether the LVS underpinning the FLEGT licensing scheme adequately fulfils its functions. |
The Parties subsequently agree on a mechanism for financing the independent assessment while ensuring its independence.
ANNEX VIII
ACCOMPANYING MEASURES
The effective implementation of this Agreement in Côte d'Ivoire requires accompanying measures for the institutions and other actors involved.
All resources necessary for the implementation of this Agreement are made available in accordance with the procedures of the Union and its Member States governing programming cooperation with Côte d'Ivoire and with Côte d'Ivoire's budgetary procedures.
The accompanying measures are the result of consultations with stakeholders, conclusions and recommendations from tests on the ground as well as recommendations stemming from various projects and studies in the forestry sector in Côte d'Ivoire.
The Parties communicate to each other the information necessary for implementing this Agreement. The accompanying measures are identified taking into account the following:
— |
the formulation of budgets for the implementation of this Agreement, specifying the support provided by Côte d'Ivoire and the support provided by the Union and other development partners, |
— |
a recommendation on the need for a joint arrangement allowing for coordination of the financing and technical contributions of the European Commission and the Member States of the Union. |
The accompanying measures are integrated into the timetable for implementation of this Agreement and the framework for monitoring and evaluating progress by the JIC. The accompanying measures cover at least the following strategic categories and actions:
a) |
establishment of bodies for the implementation and strengthening of governance and coordination between public institutions and other relevant actors; |
b) |
development of the LVS; |
c) |
capacity building, in particular:
|
d) |
support for initiatives contributing to forest governance and sustainable forest management; |
e) |
restoration of forest cover, including the renewal of the stock of exploitable timber, in particular:
|
f) |
further reforms and consolidation of the regulatory and legal framework; |
g) |
support for:
|
h) |
gender mainstreaming in the implementation of this Agreement and forest governance; |
i) |
further reforms regarding, in particular:
|
j) |
transparency and communication. |
ANNEX IX
PUBLISHED INFORMATION
1. Objectives, principles and legal bases
The implementation of this Agreement requires the publication of documents and information relating to forest management and the implementation of regulations applicable to the forestry sector. The publication of forest documents and information aims to facilitate the implementation and monitoring of the FLEGT licensing scheme and to promote good governance in the forestry sector.
Public institutions and bodies must keep the public informed. The right to information of public interest is enshrined in the legislation in force in Côte d'Ivoire (1). In addition, this obligation is based on the following principles: (i) the information is accessible free of charge or at a reasonable cost; (ii) a list of public and accessible documents is made available to the public; (iii) the information is accurate and regularly updated; (iv) the information is made available on a permanent or timely basis; (v) the information is provided in appropriate formats for publication; (vi) whistleblowers, witnesses, experts, victims and their relatives, informants and members of the High Authority for Good Governance enjoy special protection by the State against any possible retaliation or intimidation.
The Parties undertake to publish information identified following consultation with all stakeholders and grouped into a list of 10 information categories, as specified in point 2. The information set out in point 2 (a), is published by the JIC. The information set out in point 2, (b) to (i), is published by Côte d'Ivoire. The information set out in point 2 (j), is published by the Union.
2. Published information and documents
a) |
information on the implementation of this Agreement:
|
b) |
legal information:
|
c) |
information on the allocation of licences:
|
d) |
information on forest development:
|
e) |
information on wood harvesting:
|
f) |
information on timber processing:
|
g) |
information on timber marketing:
|
h) |
information on the tax contribution of the forestry sector:
|
i) |
LVS and FLEGT licensing information:
|
j) |
information to be published by the Union
|
3. Access, publication and dissemination of information and documents
The administration in charge of forest management is responsible for access to forestry information of public interest.
The arrangements for access to public information and documents are laid down by the Côte d'Ivoire legislation in force (3), but access to the information listed in this Annex is free and simple. This information is available and accessible on the website dedicated to this Agreement.
Information is disseminated via the various channels set out in Côte d'Ivoire's communication strategy.
The Minister for Forestry appoints a person responsible for access to information and documents of public interest.
4. Complaint management and review mechanism
The legal remedies provided for by the rules in force on access to information of public interest are: hierarchical appeals, appeals to the Commission for Access to Information of Public Interest and Public Documents (CAIDP) and judicial review. However, judicial review is available to the applicant only after the appeal procedure before the CAIDP is over. It is exercised within the time limits laid down in the legislation in force and is brought before the competent administrative court.
A Committee on Access to Information of Public Interest (CAIIP) is set up within the Ministry of Forestry to receive and register complaints about access to forest information before the CAIDP. An order of the Minister for Forestry establishes the remit, composition and procedures of this committee, which includes representatives of civil society and the private sector.
(1) Law on access to information of public interest; Order on preventing and combating corruption and related offences; Law on the Environment Code.
(2) OJ EU L 295, 12.11.2010, p. 23.
(3) Law on access to information of public interest.
ANNEX X
JOINT IMPLEMENTATION COMMITTEE
Pursuant to Article 19 of this Agreement, the Parties establish a Joint Implementation Committee (JIC) tasked with the governance of this Agreement. The JIC is responsible for managing, monitoring and assessing the implementation of this Agreement. The members of the JIC is appointed by the Parties. Côte d'Ivoire ensures that the various stakeholders in the forestry sector, including the public and private sectors, civil society and, via the traditional authorities, the local populations are all represented in the JIC. The JIC facilitates dialogue and exchange of information on the functioning of this Agreement. In particular, the tasks of the JIC are as follows:
a) |
as regards the management of this Agreement:
|
b) |
as regards the monitoring and assessment of this Agreement:
|
c) |
as regards the independent audit of this Agreement:
|
d) |
as regards the stakeholders' involvement in implementing and monitoring this Agreement:
|
ELI: http://data.europa.eu/eli/agree/2024/1414/oj
ISSN 1977-0677 (electronic edition)