This document is an excerpt from the EUR-Lex website
Document 02023D0941-20231211
Commission Implementing Decision (EU) 2023/941 of 2 May 2023 on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council (Text with EEA relevance)Text with EEA relevance
Consolidated text: Commission Implementing Decision (EU) 2023/941 of 2 May 2023 on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council (Text with EEA relevance)Text with EEA relevance
Commission Implementing Decision (EU) 2023/941 of 2 May 2023 on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council (Text with EEA relevance)Text with EEA relevance
This consolidated text may not include the following amendments:
Amending act | Amendment type | Subdivision concerned | Date of effect |
---|---|---|---|
32023D2752 | Modified by | annex I point 84 | 11/06/2025 |
02023D0941 — EN — 11.12.2023 — 001.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
COMMISSION IMPLEMENTING DECISION (EU) 2023/941 of 2 May 2023 on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council (OJ L 125 11.5.2023, p. 37) |
Amended by:
|
|
Official Journal |
||
No |
page |
date |
||
COMMISSION IMPLEMENTING DECISION (EU) 2023/2752 of 7 December 2023 |
L |
1 |
11.12.2023 |
COMMISSION IMPLEMENTING DECISION (EU) 2023/941
of 2 May 2023
on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council
(Text with EEA relevance)
Article 1
The references to harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.
Article 2
Implementing Decision (EU) 2020/668 is repealed.
Article 3
Communication 2018/C 209/03 is repealed.
However, it shall continue to apply in respect of the references of harmonised standards listed in Annex II to this Decision until the dates of withdrawal of those references set out in that Annex.
Article 4
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX I
No |
Reference of the standard |
1. |
EN 136:1998 Respiratory protective devices – Full face masks – Requirements, testing, marking EN 136:1998/AC:2003 |
2. |
EN 137:2006 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking |
3. |
EN 140:1998 Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking EN 140:1998/AC:1999 |
4. |
EN 142:2002 Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking |
5. |
EN 143:2021 Respiratory protective devices – Particle filters – Requirements, testing, marking |
6. |
EN 144-1:2000 Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector EN 144-1:2000/A1:2003 EN 144-1:2000/A2:2005 |
7. |
EN 144-2:1998 Respiratory protective devices – Gas cylinder valves – Part 2: Outlet connections |
8. |
EN 144-3:2003 Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygen EN 144-3:2003/AC:2003 |
9. |
EN 145:1997 Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking EN 145:1997/A1:2000 |
10. |
EN 148-1:1999 Respiratory protective devices – Threads for facepieces – Part 1: Standard thread connection |
11. |
EN 148-2:1999 Respiratory protective devices – Threads for facepieces – Part 2: Centre thread connection |
12. |
EN 148-3:1999 Respiratory protective devices – Threads for facepieces – Part 3: Tread connection M 45 x 3 |
13. |
EN 149:2001+A1:2009 Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking |
14. |
EN 175:1997 Personal protection – Equipment for eye and face protection during welding and allied processes |
15. |
EN 207:2017 Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors) |
16. |
EN 208:2009 Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
17. |
EN 250:2014 Respiratory equipment – Open-circuit self-contained compressed air diving apparatus – Requirements, testing and marking |
18. |
EN 342:2017 Protective clothing – Ensembles and garments for protection against cold |
19. |
EN 343:2019 Protective clothing – Protection against rain |
20. |
EN 352-1:2020 Hearing protectors – General requirements – Part 1: Earmuffs Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. |
21. |
EN 352-2:2020 Hearing protectors – General requirements – Part 2: Earplugs Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. |
22. |
EN 352-3:2020 Hearing protectors – General requirements – Part 3: Earmuffs attached to head protection and/or face protection devices Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. |
23. |
EN 352-4:2020 Hearing protectors – Safety requirements – Part 4: Level-dependent earmuffs |
24. |
EN 352-5:2020 Hearing protectors – Safety requirements – Part 5: Active noise reduction earmuffs |
25. |
EN 352-6:2020 Hearing protectors – Safety requirements – Part 6: Earmuffs with safety-related audio input |
26. |
EN 352-7:2020 Hearing protectors – Safety requirements – Part 7: Level-dependent earplugs |
27. |
EN 352-8:2020 Hearing protectors – Safety requirements – Part 8: Entertainment audio earmuffs |
28. |
EN 352-9:2020 Hearing protectors – Safety requirements – Part 9: Earplugs with safety-related audio input |
29. |
EN 352-10:2020 Hearing protectors – Safety requirements – Part 10: Entertainment audio earplugs |
30. |
EN 353-1:2014+A1:2017 Personal fall protection equipment – Guided type fall arresters including an anchor line – Part 1: Guided type fall arresters including a rigid anchor line |
31. |
EN 353-2:2002 Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line |
32. |
EN 354:2010 Personal fall protection equipment – Lanyards |
33. |
EN 355:2002 Personal protective equipment against falls from a height – Energy absorbers |
34. |
EN 358:2018 Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint |
35. |
EN 360:2002 Personal protective equipment against falls from a height – Retractable type fall arresters |
36. |
EN 361:2002 Personal protective equipment against falls from a height – Full body harnesses |
37. |
EN 362:2004 Personal protective equipment against falls from a height – Connectors |
38. |
EN 365:2004 Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging EN 365:2004/AC:2006 |
39. |
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) |
40. |
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016) |
41. |
EN 388:2016+A1:2018 Protective gloves against mechanical risks |
42. |
EN 397:2012+A1:2012 Industrial safety helmets |
43. |
EN 402:2003 Respiratory protective devices – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape – Requirements, testing, marking |
44. |
EN 403:2004 Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking |
45. |
EN 404:2005 Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly |
46. |
EN 405:2001+A1:2009 Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking |
47. |
EN 407:2004 Protective gloves against thermal risks (heat and/or fire) |
48. |
EN 420:2003+A1:2009 Protective gloves – General requirements and test methods |
49. |
EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination |
50. |
EN 443:2008 Helmets for fire fighting in buildings and other structures |
51. |
EN 469:2020 Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities |
52. |
EN 510:2019 Specification for protective clothing for use where there is a risk of entanglement with moving parts |
53. |
EN 511:2006 Protective gloves against cold |
54. |
EN 564:2014 Mountaineering equipment – Accessory cord – Safety requirements and test methods |
55. |
EN 565:2017 Mountaineering equipment – Tape – Safety requirements and test methods |
56. |
EN 566:2017 Mountaineering equipment – Slings – Safety requirements and test methods |
57. |
EN 567:2013 Mountaineering equipment – Rope clamps – Safety requirements and test methods |
58. |
EN 568:2015 Mountaineering equipment – Ice anchors – Safety requirements and test methods |
59. |
EN 569:2007 Mountaineering equipment – Pitons – Safety requirements and test methods |
60. |
EN 659:2003+A1:2008 Protective gloves for firefighters EN 659:2003+A1:2008/AC:2009 |
61. |
EN 795:2012 Personal fall protection equipment – Anchor devices Warning: This publication does not concern the equipment described in: — type A (anchor devices with one or more stationary anchor points and with the need for structural anchors or fixing elements to fix to the structure) referred to in clauses 3.2.1, 4.4.1, 5.3; — type C (anchor devices employing horizontal flexible anchor lines) referred to in clauses 3.2.3, 4.4.3 and 5.5; — type D (anchor devices employing horizontal rigid anchor lines) referred to in clauses 3.2.4, 4.4.4 and 5.6; — any combination of the above. In respect of types A, C and D, this publication does not concern either clauses: 4.5, 5.2.2, 6, 7; Annex A or Annex ZA. Accordingly, in respect of the equipment mentioned above, there shall be no presumption of conformity with the provisions of Regulation (EU) 2016/425 because they are not considered to be PPE. |
62. |
EN 812:2012 Industrial bump caps |
63. |
EN 813:2008 Personal fall protection equipment – Sit harnesses |
63a. |
EN 892:2012+A3:2023 Mountaineering equipment – Dynamic mountaineering ropes – Safety requirements and test methods |
64. |
EN 893:2019 Mountaineering equipment – Crampons – Safety requirements and test methods |
65. |
EN 943-1:2015+A1:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
66. |
EN 943-2:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET) |
67. |
EN 958:2017 Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods |
68. |
EN 966:2012+A1:2012 Helmets for airborne sports |
69. |
EN 1073-1:2016+A1:2018 Protective clothing against solid airborne particles including radioactive contamination – Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract |
70. |
EN 1073-2:2002 Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
71. |
EN 1077:2007 Helmets for alpine skiers and snowboarders |
72. |
EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates |
73. |
EN 1080:2013 Impact protection helmets for young children |
74. |
EN 1082-1:1996 Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 1: Chain mail gloves and arm guards |
75. |
EN 1082-2:2000 Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 2: Gloves and arm guards made of material other than chain mail |
76. |
EN 1146:2005 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape – Requirements, testing, marking |
77. |
EN 1149-5:2018 Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements |
77a. |
EN 1384:2023 Helmets for equestrian activities |
78. |
EN 1385:2012 Helmets for canoeing and white water sports |
79. |
EN 1486:2007 Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting |
80. |
EN 1497:2007 Personal fall protection equipment – Rescue harnesses |
81. |
EN 1827:1999+A1:2009 Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, testing, marking |
82. |
EN 1891:1998 Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes |
83. |
EN 1938:2010 Personal eye protection – Goggles for motorcycle and moped users |
84. |
EN ISO 10819:2013 Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) EN ISO 10819:2013/A1:2019 |
84a. |
EN ISO 10819:2013 Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) EN ISO 10819:2013/A1:2019 EN ISO 10819:2013/A2:2022 |
85. |
EN ISO 10862:2009 Small craft – Quick release system for trapeze harness (ISO 10862:2009) |
86. |
EN ISO 11393-2:2019 Protective clothing for users of hand-held chainsaws – Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018) |
87. |
EN ISO 11393-4:2019 Protective clothing for users of hand-held chainsaws – Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018) |
88. |
EN ISO 11393-5:2019 Protective clothing for users of hand-held chainsaws – Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018) |
89. |
EN ISO 11393-6:2019 Protective clothing for users of hand-held chainsaws – Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018) |
90. |
EN 12021:2014 Respiratory equipment – Compressed gases for breathing apparatus |
91. |
EN 12083:1998 Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, marking EN 12083:1998/AC:2000 |
92. |
EN 12270:2013 Mountaineering equipment – Chocks – Safety requirements and test methods |
93. |
EN 12275:2013 Mountaineering equipment – Connectors – Safety requirements and test methods |
94. |
EN 12276:2013 Mountaineering equipment – Frictional anchors – Safety requirements and test methods |
95. |
EN 12277:2015+A1:2018 Mountaineering equipment – Harnesses – Safety requirements and test methods |
96. |
EN 12278:2007 Mountaineering equipment – Pulleys – Safety requirements and test methods |
97. |
EN ISO 12312-1:2013 Eye and face protection – Sunglasses and related eyewear – Part 1: Sunglasses for general use (ISO 12312-1:2013) EN ISO 12312-1:2013/A1:2015 |
98. |
EN ISO 12312-2:2015 Eye and face protection – Sunglasses and related eyewear – Part 2: Filters for direct observation of the sun (ISO 12312-2:2015) |
99. |
EN ISO 12401:2009 Small craft – Deck safety harness and safety line – Safety requirements and test methods (ISO 12401:2009) |
100. |
EN ISO 12402-2:2020 Personal flotation devices – Part 2: Lifejackets, performance level 275 – Safety requirements (ISO 12402-2:2020) Notice: Application of clause 5.6 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425. |
101. |
EN ISO 12402-3:2020 Personal flotation devices – Part 3: Lifejackets, performance level 150 – Safety requirements (ISO 12402-3:2020) Notice: Application of clause 5.6 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425. |
102. |
EN ISO 12402-4:2020 Personal flotation devices – Part 4: Lifejackets, performance level 100 – Safety requirements (ISO 12402-4:2020) Notice: Application of clause 5.6 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425. |
103. |
EN ISO 12402-5:2020 Personal flotation devices – Part 5: Buoyancy aids (level 50) – Safety requirements (ISO 12402-5:2020) |
104. |
EN ISO 12402-6:2020 Personal flotation devices – Part 6: Special application lifejackets and buoyancy aids – Safety requirements and additional test methods (ISO 12402-6:2020) |
105. |
EN ISO 12402-8:2020 Personal flotation devices – Part 8: Accessories – Safety requirements and test methods (ISO 12402-8:2020) |
106. |
EN 12477:2001 Protective gloves for welders EN 12477:2001/A1:2005 |
107. |
EN 12492:2012 Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods |
108. |
EN 12841:2006 Personal fall protection equipment – Rope access systems – Rope adjustment devices |
109. |
EN 12941:1998 Respiratory protective devices – Powered filtering devices incorporating a helmet or a hood – Requirements, testing, marking EN 12941:1998/A1:2003 EN 12941:1998/A2:2008 |
110. |
EN 12942:1998 Respiratory protective devices – Power assisted filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking EN 12942:1998/A1:2002 EN 12942:1998/A2:2008 |
111. |
EN 13034:2005+A1:2009 Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
112. |
EN 13061:2009 Protective clothing – Shin guards for association football players – Requirements and test methods |
112a. |
EN 13089:2011+A3:2023 Mountaineering equipment – Ice-tools – Safety requirements and test methods |
113. |
EN 13138-1:2021 Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be worn EN 13138-1:2021/AC:2022 |
114. |
EN 13158:2018 Protective clothing – Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers – Requirements and test methods |
115. |
EN 13178:2000 Personal eye-protection – Eye protectors for snowmobile users |
116. |
EN 13277-1:2000 Protective equipment for martial arts – Part 1: General requirements and test methods |
117. |
EN 13277-2:2000 Protective equipment for martial arts – Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
118. |
EN 13277-3:2013 Protective equipment for martial arts – Part 3: Additional requirements and test methods for trunk protectors |
119. |
EN 13277-4:2001 Protective equipment for martial arts – Part 4: Additional requirements and test methods for head protectors EN 13277-4:2001/A1:2007 |
120. |
EN 13277-5:2002 Protective equipment for martial arts – Part 5: Additional requirements and test methods for genital protectors and abdominal protectors |
121. |
EN 13277-6:2003 Protective equipment for martial arts – Part 6: Additional requirements and test methods for breast protectors for females |
122. |
EN 13277-7:2009 Protective equipment for martial arts – Part 7: Additional requirements and test methods for hand and foot protectors |
123. |
EN 13277-8:2017 Protective equipment for martial arts – Part 8: Additional requirements and test methods for karate face protectors |
124. |
EN 13484:2012 Helmets for users of luges |
125. |
EN 13546:2002+A1:2007 Protective clothing – Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players – Requirements and test methods |
126. |
EN 13567:2002+A1:2007 Protective clothing – Hand, arm, chest, abdomen, leg, genital and face protectors for fencers – Requirements and test methods |
127. |
EN 13594:2015 Protective gloves for motorcycle riders – Requirements and test methods |
128. |
EN 13634:2017 Protective footwear for motorcycle riders – Requirements and test methods |
129. |
EN ISO 13688:2013 Protective clothing – General requirements (ISO 13688:2013) EN ISO 13688:2013/A1:2021 |
130. |
EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
131. |
EN 13794:2002 Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, testing, marking |
132. |
EN 13832-2:2018 Footwear protecting against chemicals – Part 2: Requirements for limited contact with chemicals |
133. |
EN 13832-3:2018 Footwear protecting against chemicals – Part 3: Requirements for prolonged contact with chemicals |
134. |
EN 13949:2003 Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, testing, marking |
135. |
EN ISO 13982-1:2004 Protective clothing for use against solid particulates – Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004) EN ISO 13982-1:2004/A1:2010 |
136. |
EN ISO 13998:2003 Protective clothing – Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
137. |
EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods |
138. |
EN 14052:2012+A1:2012 High performance industrial helmets |
139. |
EN 14058:2017 Protective clothing – Garments for protection against cool environments |
140. |
EN 14120:2003+A1:2007 Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods |
141. |
EN 14126:2003 Protective clothing – Performance requirements and tests methods for protective clothing against infective agents EN 14126:2003/AC:2004 |
142. |
EN 14143:2013 Respiratory equipment – Self-contained re-breathing diving apparatus |
143. |
EN 14225-1:2017 Diving suits – Part 1: Wet suits – Requirements and test methods |
144. |
EN 14225-2:2017 Diving suits – Part 2: Dry suits – Requirements and test methods |
145. |
EN 14225-3:2017 Diving suits – Part 3: Actively heated or cooled suit systems and components – Requirements and test methods |
146. |
EN 14328:2005 Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods |
147. |
EN 14387:2004+A1:2008 Respiratory protective devices – Gas filter(s) and combined filter(s) – Requirements, testing, marking |
148. |
EN 14435:2004 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, testing, marking |
149. |
EN 14458:2018 Personal eye-equipment – High performance visors intended only for use with protective helmets |
150. |
EN ISO 14460:1999 Protective clothing for automobile racing drivers – Protection against heat and flame – Performance requirements and test methods (ISO 14460:1999) EN ISO 14460:1999/AC:1999 EN ISO 14460:1999/A1:2002 |
151. |
EN 14529:2005 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
152. |
EN 14593-1:2005 Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, testing, marking |
153. |
EN 14594:2018 Respiratory protective devices – Continuous flow compressed air line breathing devices – Requirements, testing and marking |
154. |
EN 14605:2005+A1:2009 Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
155. |
EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
156. |
EN ISO 15027-1:2012 Immersion suits – Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
157. |
EN ISO 15027-2:2012 Immersion suits – Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
158. |
EN 15090:2012 Footwear for firefighters |
159. |
EN 15151-1:2012 Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
160. |
EN 15333-1:2008 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatus EN 15333-1:2008/AC:2009 |
161. |
EN 15333-2:2009 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 2: Free flow apparatus |
162. |
EN 15613:2008 Knee and elbow protectors for indoor sports – Safety requirements and test methods |
163. |
EN 16027:2011 Protective clothing – Gloves with protective effect for association football goal keepers |
164. |
EN ISO 16321-1:2022 Eye and face protection for occupational use – Part 1: General requirements (ISO 16321-1:2021) |
165. |
EN ISO 16321-2:2021 Eye and face protection for occupational use – Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021) Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead. |
166. |
EN ISO 16321-3:2022 Eye and face protection for occupational use – Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021) Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead. |
167. |
EN 16350:2014 Protective gloves – Electrostatic properties |
168. |
EN 16473:2014 Firefighters helmets – Helmets for technical rescue |
169. |
EN 16716:2017 Mountaineering equipment – Avalanche airbag systems – Safety requirements and test methods |
170. |
EN 17092-2:2020 Protective garments for motorcycle riders – Part 2: Class AAA garments – Requirements |
171. |
EN 17092-3:2020 Protective garments for motorcycle riders – Part 3: Class AA garments – Requirements |
172. |
EN 17092-4:2020 Protective garments for motorcycle riders – Part 4: Class A garments – Requirements |
173. |
EN 17092-5:2020 Protective garments for motorcycle riders – Part 5: Class B garments – Requirements |
174. |
EN 17092-6:2020 Protective garments for motorcycle riders – Part 6: Class C garments – Requirements |
175. |
EN 17109:2020 Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods |
176. |
EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) EN ISO 17249:2013/AC:2014 |
177. |
EN 17353:2020 Protective clothing – Enhanced visibility equipment for medium risk situations – Test methods and requirements |
178. |
EN 17520:2021 Mountaineering equipment – Personal belay lanyards – Safety requirements and test methods |
179. |
EN ISO 18527-1:2022 Eye and face protection for sports use – Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021) |
180. |
EN ISO 18527-2:2021 Eye and face protection for sports use – Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021) |
181. |
EN ISO 20320:2020 Protective clothing for use in Snowboarding – Wrist Protectors – Requirements and test methods (ISO 20320:2020) |
182. |
EN ISO 20345:2022 Personal protective equipment – Safety footwear (ISO 20345:2021) |
183. |
EN ISO 20346:2014 Personal protective equipment – Protective footwear (ISO 20346:2014) |
184. |
EN ISO 20347:2012 Personal protective equipment – Occupational footwear (ISO 20347:2012) |
185. |
EN ISO 20349-1:2017 Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017) EN ISO 20349-1:2017/A1:2020 |
186. |
EN ISO 20349-2:2017 Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017) EN ISO 20349-2:2017/A1:2020 |
187. |
EN ISO 20471:2013 High visibility clothing – Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) EN ISO 20471:2013/A1:2016 |
188. |
EN ISO 27065:2017 Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017) EN ISO 27065:2017/A1:2019 |
189. |
EN 50321-1:2018 Live working – Footwear for electrical protection – Insulating footwear and overboots EN 50321-1:2018/AC:2018-08 |
190. |
EN 61482-2:2020 Live working – Protective clothing against the thermal hazards of an electric arc – Part 2: Requirements (IEC 61482-2:2018, Modified) |
ANNEX II
No |
Reference of the standard |
Date of withdrawal |
1 |
EN 143:2000 Respiratory protective devices – Particle filters – Requirements, testing, marking EN 143:2000/AC:2005 EN 143:2000/A1:2006 |
9.6.2024 |
2 |
EN 166:2001 Personal eye-protection – Specifications |
11.11.2024 |
3 |
EN 169:2002 Personal eye-protection – Filters for welding and related techniques – Transmittance requirements and recommended use |
11.11.2024 |
4 |
EN 170:2002 Personal eye-protection – Ultraviolet filters – Transmittance requirements and recommended use |
11.11.2024 |
5 |
EN 172:1994 Personal eye protection – Sunglare filters for industrial use EN 172:1994/A1:2000 EN 172:1994/A2:2001 |
11.11.2024 |
6 |
EN 174:2001 Personal eye-protection – Ski goggles for downhill skiing |
11.11.2024 |
7 |
EN 352-1:2002 Hearing protectors – General requirements – Part 1: Ear-Muffs |
21.7.2024 |
8 |
EN 352-2:2002 Hearing protectors – General requirements – Part 2: Ear-plugs |
21.7.2024 |
9 |
EN 352-3:2002 Hearing protectors – General requirements – Part 3: Ear-muffs attached to an industrial safety helmet |
21.7.2024 |
10 |
EN 352-4:2001 Hearing protectors – Safety requirements and testing – Part 4: Level-dependent ear-muffs EN 352-4:2001/A1:2005 |
21.7.2024 |
11 |
EN 352-5:2002 Hearing protectors – Safety requirements and testing – Part 5: Active noise reduction ear-muffs EN 352-5:2002/A1:2005 |
21.7.2024 |
12 |
EN 352-6:2002 Hearing protectors – Safety requirements and testing – Part 6: Ear-muffs with electrical audio input |
21.7.2024 |
13 |
EN 352-7:2002 Hearing protectors – Safety requirements and testing – Part 7: Level-dependent ear-plugs |
21.7.2024 |
14 |
EN 352-8:2008 Hearing protectors – Safety requirements and testing – Part 8: Entertainment audio ear-muffs |
21.7.2024 |
15 |
EN 379:2003+A1:2009 Personal eye-protection – Automatic welding filters |
11.11.2024 |
16 |
EN 1731:2006 Personal eye protection – Mesh eye and face protectors |
11.11.2024 |
17 |
EN ISO 13688:2013 Protective clothing – General requirements (ISO 13688:2013) |
9.6.2024 |
18 |
EN ISO 20345:2011 Personal protective equipment – Safety footwear (ISO 20345:2011) |
11.11.2024 |