This document is an excerpt from the EUR-Lex website
Document 02017R0653-20220101
Commission Delegated Regulation (EU) 2017/653 of 8 March 2017 supplementing Regulation (EU) No 1286/2014 of the European Parliament and of the Council on key information documents for packaged retail and insurance-based investment products (PRIIPs) by laying down regulatory technical standards with regard to the presentation, content, review and revision of key information documents and the conditions for fulfilling the requirement to provide such documents (Text with EEA relevance)Text with EEA relevance
Consolidated text: Commission Delegated Regulation (EU) 2017/653 of 8 March 2017 supplementing Regulation (EU) No 1286/2014 of the European Parliament and of the Council on key information documents for packaged retail and insurance-based investment products (PRIIPs) by laying down regulatory technical standards with regard to the presentation, content, review and revision of key information documents and the conditions for fulfilling the requirement to provide such documents (Text with EEA relevance)Text with EEA relevance
Commission Delegated Regulation (EU) 2017/653 of 8 March 2017 supplementing Regulation (EU) No 1286/2014 of the European Parliament and of the Council on key information documents for packaged retail and insurance-based investment products (PRIIPs) by laying down regulatory technical standards with regard to the presentation, content, review and revision of key information documents and the conditions for fulfilling the requirement to provide such documents (Text with EEA relevance)Text with EEA relevance
02017R0653 — EN — 01.01.2022 — 003.002
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
COMMISSION DELEGATED REGULATION (EU) 2017/653 of 8 March 2017 supplementing Regulation (EU) No 1286/2014 of the European Parliament and of the Council on key information documents for packaged retail and insurance-based investment products (PRIIPs) by laying down regulatory technical standards with regard to the presentation, content, review and revision of key information documents and the conditions for fulfilling the requirement to provide such documents (OJ L 100 12.4.2017, p. 1) |
Amended by:
|
|
Official Journal |
||
No |
page |
date |
||
COMMISSION DELEGATED REGULATION (EU) 2018/977 of 4 April 2018 |
L 176 |
1 |
12.7.2018 |
|
COMMISSION DELEGATED REGULATION (EU) 2019/1866 of 3 July 2019 |
L 289 |
4 |
8.11.2019 |
|
COMMISSION DELEGATED REGULATION (EU) 2021/2268 of 6 September 2021 |
L 455I |
1 |
20.12.2021 |
Corrected by:
COMMISSION DELEGATED REGULATION (EU) 2017/653
of 8 March 2017
supplementing Regulation (EU) No 1286/2014 of the European Parliament and of the Council on key information documents for packaged retail and insurance-based investment products (PRIIPs) by laying down regulatory technical standards with regard to the presentation, content, review and revision of key information documents and the conditions for fulfilling the requirement to provide such documents
(Text with EEA relevance)
CHAPTER I
CONTENT AND PRESENTATION OF THE KEY INFORMATION DOCUMENT
Article 1
General information section
The section in the key information document that relates to the identity of the PRIIP manufacturer and its competent authority shall contain all of the following information:
the name of the PRIIP assigned by the PRIIP manufacturer and, where present, the PRIIP's International Securities Identification Number or Unique Product Identifier;
the legal name of the PRIIP manufacturer;
the PRIIP manufacturer's specific website address providing retail investors with information on how to get in contact with the PRIIP manufacturer, and a telephone number;
the name of the competent authority responsible for the supervision of the PRIIP manufacturer in relation to the key information document;
the date of production or, where the key information document has been subsequently revised, the date of the latest revision of the key information document.
Information in the section referred to in the first subparagraph shall also include the comprehension alert referred to in Article 8(3)(b) of Regulation (EU) No 1286/2014 where the PRIIP meets one of the following conditions:
it is an insurance-based investment product which does not meet the requirements laid down in Article 30(3)(a) of Directive (EU) 2016/97 of the European Parliament and of the Council ( 1 );
it is a PRIIP which does not meet the requirements laid down in points (i)-(vi) of Article 25(4)(a) of Directive 2014/65/EU of the European Parliament and of the Council. ( 2 )
Article 2
‘What is this product?’ section
Where the number of assets or reference values referred to in the first subparagraph is such that specific references to all of them cannot be provided within a key information document, only the market segments or instrument types in respect of the underlying investment assets or reference values shall be identified.
The details referred to in the first subparagraph shall also include an explanation of the impact of the insurance premium payments, equivalent to the estimated value of insurance benefits, on the returns of the investment for the retail investor.
The information relating to the term of the PRIIP in the section entitled ‘What is this product?’ of the key information document shall include all of the following:
the maturity date of the PRIIP or an indication that there is no maturity date;
an indication of whether the PRIIP manufacturer is entitled to terminate the PRIIP unilaterally;
a description of the circumstances under which the PRIIP can be automatically terminated, and the termination dates, if known.
Article 3
‘What are the risks and what could I get in return?’ section
In the section entitled ‘What are the risks and what could I get in return?’ of the key information document, PRIIP manufacturers shall include the following:
the level of risk of the PRIIP in the form of a risk class by using a summary risk indicator having a numerical scale from 1 to 7;
an explicit reference to any illiquid PRIIP or PRIIP with materially relevant liquidity risk, as defined in Part 4 of Annex II, in the form of a warning to this effect in the presentation of the summary risk indicator;
a narrative below the summary risk indicator explaining that if a PRIIP is denominated in a currency other than the official currency of the Member State where the PRIIP is being marketed, the return, when expressed in the official currency of the Member State where the PRIIP is being marketed, may change depending on currency fluctuations;
a brief description of the PRIIP's risk and reward profile and a warning to the effect that the risk of the PRIIP may be significantly higher than the one represented in the summary risk indicator where the PRIIP is not held to maturity or for the recommended holding period, where appropriate;
for PRIIPs with contractually agreed-upon early exit penalties or long disinvestment notice periods, a reference to the relevant underlying conditions in the section ‘How long should I hold it and can I take money out early?’;
an indication of the possible maximum loss, and information that the investment may be lost if it is not protected or where the PRIIP manufacturer is unable to pay out, or that necessary additional investment payments to the initial investment may be required and that the total loss may significantly exceed the total initial investment.
Article 4
‘What happens if [the name of the PRIIP manufacturer] is unable to pay out?’ section
PRIIP manufacturers shall include the following in the section entitled ‘What happens if [the name of the PRIIP manufacturer] is unable to pay out?’ of the key information document:
an indication whether the retail investor may face a financial loss due to the default of the PRIIP manufacturer or to the default of an entity other than the PRIIP manufacturer, and the identity of that entity;
a clarification whether the loss referred to in point (a) is covered by an investor compensation or guarantee scheme, and whether there are any limitations or conditions to that cover.
Article 5
‘What are the costs?’ section
PRIIP manufacturers shall apply the following in the section entitled ‘What are the costs?’ of the key information document:
the methodology for the calculation of costs set out in Annex VI;
the ‘Costs over time’ and ‘Composition of costs’ tables to information on costs, as set out in Annex VII in accordance with the relevant technical guidance therein.
In the ‘Composition of costs’ table in the section entitled ‘What are the costs?’ of the key information document, PRIIP manufacturers shall specify the following:
any one-off costs, as entry and exit costs, presented in percentage terms;
any recurring costs, as portfolio transaction costs per year, and other recurring costs per year, presented in percentage terms;
any incidental costs, such as performance fees or carried interest, presented in percentage terms.
Article 6
‘How long should I hold it and can I take my money out early?’ section
PRIIP manufacturers shall include the following in the section entitled ‘How long should I hold it and can I take my money out early?’ of the key information document:
a brief description of the reasons for the selection of the recommended, or the minimum required, holding period;
a description of the features of the disinvestment procedure and when disinvestment is possible, including an indication of the impact of cashing-in early on the risk or performance profile of the PRIIP, or on the applicability of capital guarantees;
information about any fees and penalties which are incurred for disinvestments prior to maturity or any other specified date other than the recommended holding period, including a cross reference to the information on costs to be included in the key information document pursuant to Article 5 and a clarification of the impact of such fees and penalties for different holding periods.
Article 7
‘How can I complain?’ section
PRIIP manufacturers shall provide the following information in the section entitled ‘How can I complain?’ of the key information document, in summary format:
steps to be followed for lodging a complaint about the product or about the conduct of the PRIIP manufacturer or the person advising on, or selling, the product;
a link to the relevant website for such complaints;
an up-to-date postal address and an email address to which such complaints may be submitted.
Article 8
‘Other relevant information’ section
Article 9
Template
PRIIP manufacturers shall present the key information document by means of the template laid down in Annex I. The template shall be completed in accordance with the requirements set out in this Delegated Regulation and in Regulation (EU) No 1286/2014.
CHAPTER II
SPECIFIC PROVISIONS ON THE KEY INFORMATION DOCUMENT
Article 10
PRIIPs offering a range of options for investment
Where a PRIIP offers a range of underlying investment options, and the information regarding those underlying investment options cannot be provided within a single, concise, stand-alone key information document, PRIIP manufacturers shall produce one of the following:
a key information document for each underlying investment option within the PRIIP including information about the PRIIP in accordance with Chapter I;
a generic key information document describing the PRIIP in accordance with Chapter I, unless otherwise specified in Articles 11 to 14.
Article 11
‘What is this product’ section in the generic key information document
In the section entitled ‘What is this product’ by way of derogation from paragraphs 2 and 3 of Article 2, PRIIP manufacturers shall specify the following:
a description of the types of underlying investment options, including the market segments or instrument types, as well as the main factors upon which return depends;
a statement indicating that the type of investors to whom the PRIIP is intended to be marketed varies on the basis of the underlying investment option;
an indication where the specific information on each underlying investment option is to be found.
Article 12
‘What are the risks and what could I get in return?’ section in the generic key information document
In the section entitled ‘What are the risks and what could I get in return?’, by way of derogation from paragraphs 2(a) and 3 of Article 3, PRIIP manufacturers shall specify the following:
the range of risk classes of all underlying investment options offered within the PRIIP by using a summary risk indicator having a numerical scale from 1 to 7, as set out in Annex III,
a statement indicating that the risk and return of the investment varies on the basis of the underlying investment option;
a brief description on how the performance of the PRIIP as a whole depends on the underlying investment options;
an indication where the specific information on each underlying investment option is to be found.
Article 13
‘What are the costs?’ section in the generic key information document
In the section entitled ‘What are the costs?’, by way of derogation from Article 5(1)(b), PRIIP manufacturers shall specify the following:
the range of costs for the PRIIP in the ‘Costs over time’ and ‘Composition of costs’ tables set out in Annex VII,
a statement indicating that the costs to the retail investor vary on the basis of the underlying investment option;
an indication where the specific information on each underlying investment option is to be found.
Article 14
Specific information on each underlying investment option
In relation to the specific information referred to in Articles 11, 12 and 13, PRIIP manufacturers shall include for each underlying investment option — all of the following:
a comprehension alert, where relevant;
the investment objectives, the means for achieving them, and the intended target market in accordance with paragraphs 2 and 3 of Article 2;
a summary risk indicator and narrative, and performance scenarios in accordance with Article 3;
a presentation of the costs in accordance with Article 5.
CHAPTER III
REVIEW AND REVISION OF THE KEY INFORMATION DOCUMENT
Article 15
Review
The review referred to in paragraph 1 shall verify whether the information contained in the key information document remains accurate, fair, clear, and non-misleading. In particular, it shall verify the following:
whether the information contained in the key information document is compliant with the general form and content requirements under Regulation (EU) No 1286/2014, or with the specific form and content requirements laid down in this Delegated Regulation;
whether the PRIIP's market risk or credit risk measures have changed, where such a change has the combined effect that necessitates the PRIIP's move to a different class of the summary risk indicator from that attributed in the key information document subject to review;
whether the mean return for the PRIIP's moderate performance scenario, expressed as an annualised percentage return, has changed by more than five percentage points.
Article 16
Revision
CHAPTER IV
DELIVERY OF THE KEY INFORMATION DOCUMENT
Article 17
Conditions on good time
For the purposes of paragraph 1, the person advising on or selling a PRIIP shall assess the time needed by each retail investor to consider the key information document, taking into account the following:
the knowledge and experience of the retail investor with the PRIIP or with PRIIPs of a similar nature or with risks similar to those arising from the PRIIP;
the complexity of the PRIIP;
where the advice or sale is at the initiative of the retail investor, the urgency explicitly expressed by the retail investor of concluding the proposed contract or offer.
Article 18
Final Provision
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply from 1 January 2018.
Article 14(2) shall apply until 30 June 2022.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
ANNEX I
TEMPLATE FOR THE KEY INFORMATION DOCUMENT
PRIIP manufacturers shall comply with the section order and titles set out in the template, which however does not fix parameters regarding the length of individual sections and the placing of page breaks, and is subject to an overall maximum of three sides of A4-sized paper when printed.
ANNEX II
METHODOLOGY FOR THE PRESENTATION OF RISK
PART 1
Market risk assessment
Determination of the market risk measure (MRM)
1. Market risk is measured by the annualised volatility corresponding to the value-at-risk (VaR) at a confidence level of 97,5 % over the recommended holding period, unless stated otherwise. The VaR is the percentage of the amount invested, that is returned to the retail investor.
2. The PRIIP shall be assigned a MRM class according to the following table:
MRM class |
VaR-equivalent volatility (VEV) |
1 |
< 0,5 % |
2 |
0,5 % - 5,0 % |
3 |
5,0 % - 12 % |
4 |
12 % - 20 % |
5 |
20 % - 30 % |
6 |
30 % - 80 % |
7 |
> 80 % |
Specification of PRIIP categories for the purposes of the market risk assessment
3. For the purposes of determining market risk, PRIIPs are divided into four categories.
4. Category 1 covers the following:
PRIIPs where investors could lose more than the amount they invested;
PRIIPs that fall within one of the categories referred to in items 4 to 10 of Section C of Annex I to Directive 2014/65/EU of the European Parliament and of the Council ( 4 );
PRIIPs or underlying investments of PRIIPs which are priced on a less regular basis than monthly, or which do not have an appropriate benchmark or proxy, or whose appropriate benchmark or proxy is priced on a less regular basis than monthly.
5. Category 2 covers PRIIPs which, either directly or on a synthetic basis, offer non-leveraged exposure to the prices of underlying investments, or a leveraged exposure on underlying investments that pays a constant multiple of the prices of those underlying investments, where at least 2 years of historical daily prices, or 4 years of historical weekly prices, or 5 years of monthly prices are available for the PRIIP, or where existing appropriate benchmarks or proxies are available, provided that such benchmarks or proxies fulfil the same criteria for the length and frequency of the price history.
6. Category 3 covers PRIIPs whose values reflect the prices of underlying investments, but not as a constant multiple of the prices of those underlying investments, where at least 2 years of daily prices of the underlying assets, 4 years of weekly prices or 5 years of monthly prices, or where existing appropriate benchmarks or proxies are available, provided that such benchmarks or proxies fulfil the same criteria for the length and frequency of the price history.
7. Category 4 covers PRIIPs whose values depend in part on factors not observed in the market, including insurance-based PRIIPs which distribute a portion of the PRIIP manufacturer's profits to retail investors.
Use of appropriate benchmarks or proxies to specify PRIIPs categories
Where appropriate benchmarks or proxies are used by a PRIIP manufacturer, those benchmarks or proxies shall be representative of the assets or exposures that determine the performance of the PRIIP. The PRIIP manufacturer shall document the use of such benchmarks or proxies.
MRM class determination for Category 1 PRIIPs
8. The MRM class for Category 1 PRIIPs shall be 7, with the exception of PRIIPs referred to in point 4(c) of this Annex, where the MRM class shall be 6.
MRM class determination for Category 2 PRIIPs
9. The VaR shall be calculated from the moments of the observed distribution of returns of the PRIIP's or its benchmark or proxy's price during the past 5 years. The minimum frequency of observations is monthly. Where prices are available on a daily basis, the frequency shall be daily. Where prices are available on a weekly basis, the frequency shall be weekly. Where prices are available on a bi-monthly basis, the frequency shall be bi-monthly.
10. Where data on daily prices covering a period of 5 years are not available, a shorter period may be used. For daily observations of a PRIIP's or its benchmark or proxy's price, there shall be at least 2 years of observed returns. For weekly observations of a PRIIP's price, there shall be at least 4 years of observed data. For monthly observations of a PRIIP's price, there shall be observed data covering a period of at least 5 years.
11. The return over each period is defined as the natural logarithm of the ratio of the price at the market close at the end of the current period to the market close at the end of the preceding period.
12. The VaR measure in return space is given by the Cornish-Fisher expansion, as follows:
where N is the number of trading periods in the recommended holding period; and σ, μ1, μ2 are respectively the volatility, skew and excess kurtosis measured from the return distribution. The volatility, skew and excess kurtosis are calculated from the measured moments of the distribution of returns in accordance with the following:
13. The VEV is given by:
where T is the length of the recommended holding period in years.
14. For PRIIPs that are managed according to investment policies or strategies that pursue certain reward objectives by participating through flexible investment in different financial asset classes (e.g. in both equity and fixed-income markets), the VEV that shall be used shall be determined as follows:
where there has been no revision of the investment policy over the period referred to in point 10 of this Annex, the VEV that shall be used is the highest of the following VEVs
the VEV computed in accordance with points 9 to 13 of this Annex;
the VEV of the returns of the pro-forma asset mix that is consistent with the reference asset allocation of the fund at the time of the computation;
the VEV which is consistent with the risk limit of the fund, if any and appropriate.
where investment policy has been revised during the period referred to in point 10 of this Annex, the VEV that shall be used is the highest of the VEVs referred to in point (a)(ii) and (iii).
15. The PRIIP shall be assigned to a MRM class as laid down under point 2 of this Annex depending on the VEV. In the case of a PRIIP having only monthly price data, the MRM class assigned under point 2 of this Annex shall be increased by one additional class.
MRM class determination for Category 3 PRIIPs
16. The VaR in price space shall be calculated from a distribution of PRIIP values at the end of the recommended holding period. The distribution shall be obtained by simulating the price or prices, which determine the value of the PRIIP, at the end of the recommended holding period. The VaR shall be the value of the PRIIP at a confidence level of 97,5 % at the end of the recommended holding period discounted to the present date using the expected risk-free discount factor from the present date to the end of the recommended holding period.
17. The VEV is given by:
where T is the length of the recommended holding period in years. Only in cases where the product is called or cancelled before the end of the recommended holding period according to the simulation, the period in years until the call or cancellation is used in the calculation.
18. The PRIIP shall be assigned to a MRM class as laid down in point 2 of this Annex, depending on the VEV. In the case of a PRIIP having only monthly price data, the MRM class assigned under point 2 of this Annex shall be increased by one additional class.
19. The minimum number of simulations is 10 000 .
20. The simulation is based on bootstrapping the expected distribution of prices or price levels for the PRIIP's underlying contracts from the observed distribution of returns for these contracts with replacement.
21. For the purposes of the simulation referred to in points 16 to 20 of this Annex, there are two types of market observables that may contribute to a PRIIP's value: spot prices (or price levels) and curves.
22. For each simulation of a spot price (or level), the PRIIP manufacturer shall:
calculate the return for each observed period in the past 5 years, or the years referred to in point 6 of this Annex, by taking the logarithm of the price at the end of each period divided by the price at the end of the previous period;
randomly select one observed period which corresponds to the return for all underlying contracts for each simulated period in the recommended holding period (the same observed period may be used more than once in the same simulation);
calculate the return for each contract by summing the returns from the selected periods and correcting this return to ensure that the expected return measured from the simulated distribution of returns is the risk-neutral expectation of the return over the recommended holding period. The final value of the return is given by:
Where:
calculate the price of each underlying contract by taking the exponential of the return.
23. For curves, a principal component analysis (PCA) shall be performed to ensure that the simulation of the movements of each point on the curve over a long period results in a consistent curve.
The PCA is performed by:
collecting the historical record of tenor points that define the curve for each trading period over the past 5 years, or the years referred to in point 6 of this Annex;
ensuring that each tenor point is positive — where there is a negative tenor point, all tenor points shall be shifted by the minimum whole number or percentage to ensure positive values for all tenor points;
calculating the return over each period for each tenor point by taking the natural logarithm of the ratio between the price/level at the end of each observed period and the price/level at the end of the preceding period;
correcting the returns observed at each tenor point so that the resulting set of returns at each tenor point has a zero mean;
calculating the covariance matrix between the different tenors by summing over returns;
calculating the eigenvectors and eigenvalues of the covariance matrix;
selecting the eigenvectors that correspond to the three largest eigenvalues;
forming a matrix with 3 columns where the first column is the eigenvector with the largest eigenvalue; the middle column is the eigenvector with the second-largest eigenvalue and the last column is the eigenvector with the third-largest eigenvalue;
projecting the returns onto the 3 principal eigenvectors calculated in the previous step by multiplying the N×M matrix of returns obtained in point (iv) by the M×3 matrix of eigenvectors obtained in point (viii);
calculating the matrix of returns to be used in the simulation by multiplying the results in point (ix) with the transpose of the matrix of eigenvectors obtained in point (viii). This is the set of values to be used in the simulation.
The curve simulation is performed as follows:
the time step in the simulation is one period. For each observation period in the recommended holding period select a row at random from the calculated matrix of returns. The return for each tenor point, T, is the sum over the selected rows of the column corresponding to tenor point, T.
the simulated rate for each tenor point T, is the current rate at tenor point T:
24. For PRIIPS in Category 3 that are characterized by an unconditional protection of capital, the PRIIP manufacturer may assume that the VaR at a confidence level of 97,5 % is equal to the level of the unconditional capital protection at the end of the recommended holding period, discounted to the present date using the expected risk-free discount factor.
MRM class determination for Category 4 PRIIPs
25. Where the PRIIP performance depends on a factor or factors unobserved in the market or to some extent under the control of the PRIIP manufacturer, or this is the case for a component of the PRIIP, the PRIIP manufacturer shall follow the method in this section to account for this factor or factors.
26. The different components of the PRIIP that contribute to the performance of the PRIIP shall be identified, in order for those components that are not wholly or partly dependent on a factor or factors that are unobserved in the market to be treated according to the relevant methods set out in this Annex for Category 1, 2 or 3 PRIIPs. For each of these components a VEV shall be calculated.
27. The component of the PRIIP that depends wholly or partly on a factor or factors that are unobserved in the market shall follow robust and well recognised industry and regulatory standards for determining relevant expectations as to the future contribution of these factors and the uncertainty that may exist in respect of that contribution. Where the component is not wholly dependent on a factor that is unobserved in the market, a bootstrap methodology shall be used to account for the market factors, as set out for Category 3 PRIIPs. The VEV for the component of the PRIIP shall be the result of the combination of the bootstrap methodology and robust and well recognised industry and regulatory standards for determining relevant expectations as to the future contribution of these factors that are unobserved in the market.
28. The VEV of each component of the PRIIP shall be weighted proportionally in order to arrive at an overall VEV of the PRIIP. When weighing the components, product features shall be taken into account. Where relevant, product algorithms mitigating the market risk as well as specificities of the with-profit component shall be considered.
29. For Category 4 PRIIPs that are characterized by an unconditional protection of capital, the PRIIP manufacturer may assume that VaR at a confidence level of 97,5 % is equal to the level of unconditional capital protection at the end of the recommended holding period, discounted to the present date using the expected risk-free discount factor.
PART 2
Methodology for assessing credit risk
I. GENERAL REQUIREMENTS
30. A PRIIP or its underlying investments or exposures shall be taken to entail credit risk where the return of the PRIIP or its underlying investments or exposures depends on the creditworthiness of a manufacturer or party bound to make, directly or indirectly, relevant payments to the investor. A PRIIP with a MRM of 7 is not required to assess credit risk.
31. Where an entity directly engages to make a payment to a retail investor for a PRIIP, credit risk shall be assessed for the entity that is the direct obligor.
32. If all payment obligations of an obligor or one or more indirect obligors are unconditionally and irrevocably guaranteed by another entity (the guarantor), the credit risk assessment of the guarantor can be used if it is more favourable than the credit risk assessment of the respective obligor or obligors.
33. For PRIIPs which are exposed to underlying investments or techniques, including PRIIPs which themselves entail credit risk or in turn make underlying investments that entail credit risk, the credit risk shall be assessed in relation to the credit risk entailed both by the PRIIP itself and the underlying investments or exposures (including exposures to other PRIIPs), on a look-through basis and adopting a cascade assessment where necessary.
34. Where the credit risk is entailed solely at the level of underlying investments or exposures (including to other PRIIPs), the credit risk shall not be assessed at the level of the PRIIP itself but instead at the level of these underlying investments or exposures on a look-through basis. Where the PRIIP is an Undertaking for Collective Investment in Transferable Securities (UCITS) or an Alternative Investment Fund (AIF), the UCITS or AIF itself shall be taken to entail no credit risk, whereas the underlying investments or exposures of the UCITS or AIF shall be assessed where necessary.
35. Where a PRIIP is exposed to multiple underlying investments entailing a credit risk exposure, the credit risk entailed by each underlying investment representing an exposure of 10 % or more of the total assets or value of the PRIIP shall be separately assessed.
36. Underlying investments or exposures to exchange-traded derivatives or cleared OTC derivatives shall be assumed for the purposes of the credit risk assessment to carry no credit risk. No credit risk shall be taken to be entailed where an exposure is fully and appropriately collateralised, or where uncollateralised exposures that entail credit risk amount to less than 10 % of the total assets or value of the PRIIP.
II. CREDIT RISK ASSESSMENT
Credit assessment of obligors
37. Where available, a PRIIP manufacturer shall define ex-ante one or more external credit assessment institutions (ECAI) certified or registered with the European Securities and Markets Authority (ESMA) in accordance with Regulation (EC) No 1060/2009 of the European Parliament and the Council ( 5 ) whose credit assessments will consistently be referred to for the purpose of the credit risk assessment. Where multiple credit assessments are available according to that policy, the median rating shall be used, defaulting to the lower of the two middle values in case of an even number of assessments.
38. The level of credit risk of the PRIIP and each relevant obligor shall be assessed on the basis of, as applicable:
the credit assessment assigned to the PRIIP by an ECAI;
the credit assessment assigned to the relevant obligor by an ECAI;
in the absence of a credit assessment under either (a) or (b) or both, a default credit assessment as set out in point 43 of this Annex.
Allocation of credit assessments to credit quality steps
39. The allocation of credit assessments of ECAIs to an objective scale of credit quality steps shall be based on Commission Implementing Regulation (EU) 2016/1800 ( 6 ).
40. In the case of credit risks assessed on a look-through basis, the credit quality step assigned shall correspond to the weighted average credit quality steps of each relevant obligor for which a credit assessment needs to be undertaken, in proportion to the total assets they respectively represent.
41. In the case of credit risks assessed on a cascade basis, all credit risk exposures shall be separately assessed, per layer, and the credit quality step assigned shall be the highest credit quality step, being understood that between a credit quality step set at 1 and a credit quality step set at 3, the higher of the two is 3.
42. The credit quality step pursuant to point 38 of this Annex shall be adjusted to the maturity or recommended holding period of the PRIIP, according to the following table, except where a credit assessment has been assigned that reflects that maturity or recommended holding period):
Credit quality step pursuant to point 38 of this Annex |
Adjusted credit quality step, in the case where the maturity of the PRIIP, or its recommended holding period where a PRIIP does not have a maturity, is up to one year |
Adjusted credit quality step, in the case where the maturity of the PRIIP, or its recommended holding period where a PRIIP does not have a maturity, ranges from one year up to 12 years |
Adjusted credit quality step, in the case where the maturity of the PRIIP, or its recommended holding period where a PRIIP does not have a maturity, exceeds 12 years |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
1 |
2 |
1 |
2 |
2 |
3 |
2 |
3 |
3 |
4 |
3 |
4 |
5 |
5 |
4 |
5 |
6 |
6 |
6 |
6 |
6 |
43. If the obligor has no external credit assessments, the default credit assessment as referred to in point 38 of this Annex shall be:
credit quality step 3, if the obligor is regulated as a credit institution or an insurance undertaking under the applicable Union law or the legal framework deemed equivalent under Union law and if the rating of the Member State where the obligor is domiciled would be credit quality step 3;
credit quality step 5, for any other obligor.
III. CREDIT RISK MEASURE
44. A PRIIP shall be allocated to a credit risk measure (CRM) on a scale ranging from 1 to 6 on the basis of the mapping table laid down in point 45 of this Annex and by applying the credit risk mitigating factors under points 46, 47, 48 and 49 of this Annex, or the credit risk escalating factors under points 50 and 51 of this Annex, as appropriate.
45. Table on the mapping of credit quality steps into a CRM:
Adjusted credit quality step |
Credit risk measure |
0 |
1 |
1 |
1 |
2 |
2 |
3 |
3 |
4 |
4 |
5 |
5 |
6 |
6 |
46. The CRM may be assigned as 1 where the assets of a PRIIP or appropriate collateral, or assets backing the payment obligation of the PRIIP, are:
at all times until maturity equivalent to the payment obligations of the PRIIP to its investors;
not, under any circumstances, accessible to any other creditors of the manufacturer under applicable law.
47. The CRM may be assigned as 2 where the assets of a PRIIP or appropriate collateral, or assets backing the payment obligation of the PRIIP, are:
at all times until maturity equivalent to the payment obligations of the PRIIP to its investors;
identified and held on accounts or registers, based on applicable law, including Articles 275 and 276 of Directive 2009/138/EC of the European Parliament and of the Council ( 9 ); and
such that the claims of retail investors have priority over the claims of other creditors of the PRIIP manufacturer or party bound to make, directly or indirectly, relevant payments to the investor.
48. Where credit risk is to be assessed on a look-through or cascade basis, the mitigation factors under point 46 and 47 of this Annex may also be applied when assessing credit risk in relation to each underlying obligor.
49. Where a PRIIP is not able to satisfy the criteria under point 47 of this Annex, the CRM pursuant to point 45 of this Annex may be reduced by one class where the claims of retail investors have priority over the claims of ordinary creditors, as set out in Article 108 of Directive 2014/59/EU, of the PRIIP manufacturer or party bound to make, directly or indirectly, relevant payments to the investor, in so far as the obligor is subject to relevant prudential requirements in respect of ensuring an appropriate matching of assets and liabilities.
50. The CRM pursuant to point 45 of this Annex shall be increased by two classes where the claim of a retail investor is subordinate to the claims of senior creditors.
51. The CRM pursuant to point 45 of this Annex shall be increased by three classes where a PRIIP is part of the own funds of the PRIIP obligor, as defined in Article 4(1)(118) of Regulation (EU) No 575/2013 of the European Parliament and of the Council ( 10 ) or in Article 93 of Directive 2009/138/EU.
PART 3
Aggregation of market and credit risk into the summary risk indicator
52. The overall summary risk indicator (SRI) is assigned according to the combination of the CRM and the MRM classes, in accordance with the following table:
MRM class CRM class |
MR1 |
MR2 |
MR3 |
MR4 |
MR5 |
MR6 |
MR7 |
CR1 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
CR2 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
CR3 |
3 |
3 |
3 |
4 |
5 |
6 |
7 |
CR4 |
5 |
5 |
5 |
5 |
5 |
6 |
7 |
CR5 |
5 |
5 |
5 |
5 |
5 |
6 |
7 |
CR6 |
6 |
6 |
6 |
6 |
6 |
6 |
7 |
Monitoring data with relevance for the summary risk indicator
53. The PRIIP manufacturer shall monitor market data relevant to the calculation of the MRM class and, if the MRM class changes to a different MRM class, the PRIIP manufacturer shall attribute the corresponding MRM class to the MRM class which the PRIIP has matched for the majority of the reference points over the preceding four months.
54. The PRIIP manufacturer shall also monitor credit risk criteria relevant to the calculation of the CRM and, if according to these criteria the CRM would change to a different CRM class, the PRIIP shall re-attribute the CRM to the relevant CRM class.
55. A review of the MRM class shall always be carried out following a decision by the PRIIP manufacturer in respect of the PRIIP's investment policy and/or strategy. In those circumstances, any changes to the MRM shall be understood as a new determination of the PRIIP's MRM class, and consequently, be carried out according to the general rules concerning the determination of an MRM class for the PRIIP category.
PART 4
Liquidity risk
56. A PRIIP shall be considered as having a materially relevant liquidity risk where either of the following criteria are fulfilled:
the PRIIP is admitted to trading on a secondary market or alternative liquidity facility and there is no committed liquidity offered by market makers or the PRIIP manufacturer, so that the liquidity depends only on the availability of buyers and sellers on the secondary market or alternative liquidity facility, taking into account that regular trading of a product at one point in time does not guarantee the regular trading of the same product at any other point in time;
the average liquidity profile of the underlying investments is significantly lower than the regular reimbursement frequency for the PRIIP, when and to the extent liquidity offered by the PRIIP is conditional to the liquidation of its underlying assets;
the PRIIP manufacturer estimates that the retail investor may face significant difficulties in terms of time or costs for disinvesting during the life of the product, subject to specific market conditions.
57. A PRIIP shall be considered illiquid, whether contractually or not, if either of the following criteria are fulfilled:
the PRIIP is not admitted to trading on a secondary market, and no alternative liquidity facility is promoted by the PRIIP manufacturer or a third party, or the alternative liquidity facility is subject to significant limiting conditions, including significant early exit penalties or discretionary redemption prices, or where there is an absence of liquidity arrangements;
the PRIIP offers potential early exit or redemption possibilities prior to the applicable maturity, but these are subject to significant limiting conditions, including significant exist penalties or discretionary redemption prices, or to the prior consent and discretion of the PRIIP manufacturer;
the PRIIP does not offer potential early exit or redemption possibilities prior to the applicable maturity.
58. A PRIIP shall be considered liquid in all other cases.
ANNEX III
PRESENTATION OF SRI
Presentation format
1. PRIIP manufacturers shall use the format below for the presentation of the SRI in the key information document. The relevant number shall be highlighted as shown depending on the SRI for the PRIIP.
Completion guidance with regard to the SRI
2. The narrative explanation after the SRI shall briefly explain the purpose of the SRI and the underlying risks.
3. Immediately below the SRI, the time frame of the recommended holding period shall be indicated. In addition, a warning shall be included directly below the SRI in the following cases:
where the risk of the PRIIP is considered to be significantly higher if the holding period is different;
where a PRIIP is considered to have a materially relevant liquidity risk or to be illiquid, whether this is contractual in nature or not.
4. As applicable for each PRIIP, the narrative explanation shall include:
a warning in bold font where:
a PRIIP is considered to have currency risk as referred to in Article 3(2)(c) of this Regulation (Element C);
a PRIIP holds a possible obligation to add to the initial investment, (Element D);
where applicable, an explanation of risks materially relevant to the PRIIP which could not be adequately captured by the SRI (Element E);
a clarification:
that the PRIIP holds a (partial) capital protection against market risk where relevant, including a specification of the percentage of the invested capital that is protected (Element F);
of the specific conditions of the limitations where the (partial) capital protection against market risk is limited (Element G);
that the PRIIP holds no capital protection against market risk, where relevant (Element H);
that the PRIIP holds no capital guarantee against credit risk, where relevant (Element I);
of the specific conditions of the limitations where the protection against credit risk is limited (Element J).
5. For PRIIPs offering a range of options for investment, PRIIP manufacturers shall use the format referred to point 1 of this Annex for the presentation of the SRI, indicating all of the risk classes offered from the lowest risk class to the highest risk class.
6. For derivatives that are futures, call options and put options traded on a regulated market or on a third-country market considered to be equivalent to a regulated market in accordance with Article 28 of Regulation (EU) No 600/2014, Elements A, B, and, where relevant, H, shall be included.
Narrative explanations
7. For the purposes of the SRI presentation, including point 4 of this Annex, the following narrative explanations shall be used, as appropriate:
ANNEX IV
PERFORMANCE SCENARIOS
Number of scenarios
1. The four performance scenarios under this Regulation which shall show a range of possible returns, shall be the following:
a favourable scenario;
a moderate scenario;
an unfavourable scenario;
a stress scenario.
2. The stress scenario shall set out significant unfavourable impacts of the product not covered in the unfavourable scenario referred to in point 1(c) of this Annex. The stress scenario shall show intermediate periods where those periods would be shown for the performance scenarios under point 1(a) to (c) of this Annex.
3. An additional scenario for insurance-based investment products shall be based on the moderate scenario referred to in point 1(b), where the performance is relevant in respect of the return of the investment.
Calculation of scenario values for the recommended holding period
4. The scenario values under different performance scenarios shall be calculated in a similar manner as the market risk measure. The scenarios values shall be calculated for the recommended holding period.
5. The unfavourable scenario shall be the value of the PRIIP at the 10th percentile.
6. The moderate scenario shall be the value of the PRIIP at the 50th percentile.
7. The favourable scenario shall be the value of the PRIIP value at the 90th percentile.
8. The stress scenario shall be the value of the PRIIP that results from the methodology outlined in points 10 and 11 of this Annex for Category 2 PRIIPs and in points 12 and 13 of this Annex for Category 3 PRIIPs.
9. For Category 2 PRIIPs, the expected values at the end of the recommended holding period shall be:
The unfavourable scenario:
The moderate scenario:
The favourable scenario:
where N is the number of trading periods in the recommended holding period, and where the other terms are defined in point 12 of Annex II.
10. For Category 2 PRIIPs, the calculation of the stress scenario has the following steps:
Identify a sub interval of length w which corresponds to the following intervals:
|
1 year |
> 1 year |
Daily prices |
21 |
63 |
Weekly prices |
8 |
16 |
Monthly prices |
6 |
12 |
Identify for each sub interval of length w the historical lognormal returns rt, where t = t0, t1, t2, …, tN.
Measure the volatility based on the formula below starting from ti = t0 rolling until ti = tN – w
Where Mw is the count of number of observations in the sub interval and
is the mean of all the historical lognormal returns in the corresponding sub interval.
11. For Category 2 PRIIPs, the expected values at the end of the recommended holding period for the stress scenario shall be:
where zα is a proper selected value of the PRIIP at the extreme percentile that corresponds to 1 % for 1 year and to 5 % for the other holding periods.
12. For Category 3 PRIIPs, the following adjustments shall be made to the calculation of favourable, moderate and unfavourable performance scenarios:
the expected return for each asset or assets shall be the return observed over the period as determined under point 6 of Annex II;
the expected performance shall be calculated at the end of the recommended holding period, and without discounting the expected performance using the expected risk-free discount factor.
13. For Category 3 PRIIPs, the following adjustments shall be made for the calculation of the stress scenario:
Rescale historical returns rt, based on the formula set out below;
Calculate the return for each contract by summing returns from selected periods and correcting these returns to ensure that the expected return measured from the simulated return's distribution is as below
where E*[r bootstrapped ] is the new simulated mean.
14. For Category 3 PRIIPs, the stress scenario shall be the value of the PRIIP at the extreme zα percentile as defined in point 11 of this Annex of the simulated distribution as set out in point 13 of this Annex.
15. For Category 4 PRIIPs, the method under point 27 of Annex II shall be used in respect of those factors that are not observed in the market, combined as necessary with the method for Category 3 PRIIPs. The relevant methods for Category 2 PRIIPs set out in points 9 to 11 of this Annex and the relevant methods for Category 3 PRIIPs set out in points 12 to 14 of this Annex shall be used for the relevant components of the PRIIP where the PRIIP combines different components. The performance scenarios shall be a weighted average of the relevant components. Product features and capital guarantees shall be taken into consideration in the performance calculations.
16. For Category 1 PRIIPs as defined in point 4(a) of Annex II, and Category 1 PRIIPs as defined in point 4(b) of Annex II that are not futures, call options and put options traded on a regulated market or on a third-country market considered to be equivalent to a regulated market in accordance with Article 28 of Regulation (EU) No 600/2014, performance scenarios shall be calculated in accordance with points 12 to 14 of this Annex.
17. For Category 1 PRIIPs, that are futures, call options and put options traded on a regulated market or on a third-country market considered to be equivalent to a regulated market in accordance with Article 28 of Regulation (EU) No 600/2014, performance scenarios shall be shown in the form of pay-off structure graphs. A graph shall be included to show performance for all scenarios for the different levels of the underlying value. The horizontal axis of the graph shall show the various possible prices of the underlying value and the vertical axis shall show the profit or loss at the different prices of the underlying value. For every price of the underlying value, the graph shall show the resulting profit or loss and at which price of the underlying value the profit or loss shall be zero.
18. For Category 1 PRIIPs as defined in point 4(c) of Annex II a reasonable and conservative best estimate of the expected values for the performance scenarios set out in point 1(a) to (c) of this Annex at the end of the recommended holding period shall be provided.
The scenarios selected and shown shall be consistent with and complement the other information contained in the key information document, including the overall risk profile for the PRIIP. The PRIIP manufacturer shall ensure the consistency of the scenarios with internal product governance conclusions, including amongst other things, any stress-testing undertaken by the PRIIP manufacturer for the PRIIP, and data and analysis used for the purposes of producing the other information contained with the key information document.
The scenarios shall be selected to give a balanced presentation of the possible outcomes of the product in both favourable and unfavourable conditions, but only scenarios that can be reasonably expected shall be shown. The scenarios shall not be selected so as give undue prominence to favourable outcomes at the expense of unfavourable ones.
Calculation of expected values for intermediate holding periods
19. For PRIIPs with a recommended holding period between 1 and 3 years, performance shall be shown at 2 different holding periods: at the end of the first year and at the end of the recommended holding period.
20. For PRIIPs with a recommended holding period of 3 years or more, performance shall be shown at 3 holding periods: at the end of the first year, after half the recommended holding period rounded up to the end of the nearest year, and at the end of the recommended holding period.
21. For PRIIPs with a recommended holding period of 1 year or less, no performance scenarios for intermediate holding periods shall be shown.
22. For Category 2 PRIIPs, the values to be shown for the intermediate periods shall be calculated using the formulas in point 9 to 11 of this Annex with the N defined to be the number of trading periods from the start date to the end of the intermediate period.
23. For Category 1 PRIIPs and Category 4 PRIIPs, the values to be shown for the intermediate periods shall be estimated by the PRIIP manufacturer in a manner consistent with the estimation at the end of the recommended holding period. To this end, the method used to estimate the value of the PRIIP at the start of each intermediate period needs to produce the same value for the entire recommended holding period, as under the method prescribed in points 16 and 15 of this Annex respectively.
24. For Category 3 PRIIPs, to produce the favourable, moderate, unfavourable and stress scenarios at an intermediate period before the end of the recommended holding period, the manufacturer shall pick three underlying simulations as referred to in points 16 to 24 of Annex II used for the calculation of the MRM and one underlying simulation as referred to in point 13 of this Annex, on the basis of underlying levels only and in such a manner that the simulated value of the PRIIPs for that intermediate period is likely to be consistent with the relevant scenario.
To produce the favourable, moderate, unfavourable and stress scenarios at an intermediate period for a Category 3 PRIIP with one underlying and whose value is known to be a increasing function of its underlying level, the manufacturer shall pick three underlying simulations as referred to in points 16 to 24 of Annex II used for the calculation of the MRM and one underlying simulation as referred to in point 13 of this Annex, leading respectively to the 90th percentile level for the favourable scenario, the 50th percentile level for the moderate scenario, the 10th percentile level for the unfavourable scenario and the percentile level that corresponds to 1 % for 1 year and to 5 % for the other holding periods for the stress scenario.
To produce the favourable, moderate, unfavourable and stress scenarios at an intermediate period for a Category 3 PRIIP with one underlying and whose value is known to be an decreasing function of its underlying level, the manufacturer shall pick three underlying simulations as referred to in points 16 to 24 of Annex II used for the calculation of the MRM and one underlying simulation as referred to in point 13 of this Annex, leading respectively to the 90 the percentile level for the unfavourable scenario, the 50th percentile level for the moderate scenario, the 10th percentile level for the favourable scenario and the percentile level that corresponds to 1 % for 1 year and to 5 % for the other holding periods for the stress scenario.
To produce the favourable, moderate, unfavourable and stress scenarios at an intermediate period for a Category 3 PRIIP other than those mentioned in points (a) and (b) the manufacturer shall choose underlying values consistent with the 90th, the 50th, and the 10th percentile levels and the percentile level that corresponds to 1 % for 1 year and to 5 % for the other holding periods of the PRIIP and use these values as the seed values for a simulation to determine the value of the PRIIP.
25. For Category 1 PRIIPs that are futures, call options and put options traded on a regulated market or on a third-country market considered to be equivalent to a regulated market in accordance with Article 28 of Regulation (EU) No 600/2014, performance scenarios for intermediate holding periods shall not be included.
26. For favourable, moderate and unfavourable scenarios at intermediate periods, the estimate of the distribution used to read the value of the PRIIP at different percentiles shall be consistent with the observed return and volatility observed over the past 5 years of all market instruments that determine the PRIIP's value. For the stress scenario at intermediate periods, the estimate of the distribution used to read the value of the PRIIP at different percentiles shall be consistent with the simulated distribution of all market instruments that determine the PRIIP's value as set out in points 11 and 13.
27. The unfavourable scenario shall be the estimate of the value of the PRIIP at the start of the intermediate period consistent with the 10th percentile.
28. The moderate scenario shall be the estimate of the value of the PRIIP at the start of the intermediate period consistent with the 50th percentile.
29. The favourable scenario shall be the estimate of the value of the PRIIP at the start of the intermediate period consistent with the 90th percentile.
30. The stress scenario shall be the estimate of the value of the PRIIP at the start of the intermediate period consistent with the percentile level that corresponds to 1 % for 1 year and to 5 % for the other holding periods of the simulated distribution as set out in point 13.
General requirements
31. The performance of the PRIIP shall be calculated net of all applicable costs in accordance with Annex VI for the scenario and holding period being presented.
32. Performance shall be presented in monetary units. The amounts used shall be consistent with the amounts referred to in point 90 of Annex VI.
33. Performance shall also be presented in percentage terms, as the average annual return of the investment. That figure shall be calculated considering net performance as numerator and the initial investment amount or the price paid as denominator.
For those PRIIPs where there is no initial investment or price paid such as future contracts or swaps, the percentage shall be calculated considering the nominal value of the contract and a footnote shall be added to explain that calculation.
34. For an insurance based investment product, the following shall apply in addition to the methods referred above including under point 15 when calculating the performance scenarios in respect of the investment:
future profit participation shall be taken into account;
assumptions on future profit participation shall be consistent with the assumption on the annual rates of return of the underlying assets;
assumptions on how future profits are shared between the PRIIP manufacturer and the retail investor and other assumptions on future profit sharing shall be realistic and in line with the current business practice and business strategy of the PRIIP manufacturer. Where there is sufficient evidence that the undertaking will change its practices or strategy, the assumptions on future profit sharing shall be consistent with the changed practices or strategy. For life insurers within the scope of Directive 2009/138/EC, these assumptions shall be consistent with the assumptions on future management actions used for the valuation of technical provisions in the Solvency II-balance-sheet;
where a component of the performance relates to profit participation that is payable on a discretionary basis, this component shall only be assumed in the favourable performance scenarios:
the performance scenarios shall be calculated on the basis of the investment amounts set out in point 32 of this Annex.
ANNEX V
METHODOLOGY FOR THE PRESENTATION OF PERFORMANCE SCENARIOS
PART 1
General presentation specifications
1. The performance scenarios shall be presented in a way that is fair, accurate, clear and not misleading, and that is likely to be understood by the average retail investor.
2. Where performance scenarios may be shown only at maturity or at the end of the recommended holding period, as for the PRIIPs referred to in point 21 of Annex IV, that shall be clearly explained in the narrative set out in element E in Part 2 of this Annex.
3. In all cases, the narrative explanations set out in elements A, B, C, D and F in Part 2 of this Annex shall be included, except in the case of Category 1 PRIIPs referred to in point 17 of Annex IV, where the narrative explanations set in elements G to K shall be used instead.
PART 2
Presentation of performance scenarios
For all PRIIPs except for category 1 PRIIPs referred to in point 17 of Annex IV, PRIIP manufacturers shall present the performance scenarios by means of the formats below, depending on whether the PRIIP is a single investment or premium or a regular payment or premium PRIIP. The interim periods may differ depending on the length of the recommended holding period. For insurance-based investment products additional rows are included in respect of the scenario for the insurance benefits including the cumulative biometric risk premium for a regular premium insurance-based investment product. Returns for that scenario shall only be shown in absolute values.
Template A: Single investment and/or single premium is paid.
Single investment paid
Single premium paid
Template B: Regular investments and/or premiums are paid.
Regular investments paid
Regular premiums paid
Performance scenarios
[Element A] This [table/graph] shows the money you could get back over the next [recommended holding period] years, under different scenarios, assuming that you invest EUR […] [per year].
[Element B] The scenarios shown illustrate how your investment could perform. You can compare them with the scenarios of other products.
[Element C] The scenarios presented are an estimate of future performance based on evidence from the past on how the value of this investment varies, and are not an exact indicator. What you get will vary depending on how the market performs and how long you keep the investment/product.
[Element D] The stress scenario shows what you might get back in extreme market circumstances, and it does not take into account the situation where we are not able to pay you.
[Where applicable][Element E] This product cannot be [easily] cashed in. This means it is difficult to estimate how much you would get back if you cash in before [the end of the recommended holding period/maturity]. You will either be unable to cash in early or you will have to pay high costs or make a large loss if you do so.
[Element F] The figures shown include all the costs of the product itself, [where applicable]:[but may not include all the costs that you pay to your advisor or distributor][and includes the costs of your advisor or distributor]. The figures do not take into account your personal tax situation, which may also affect how much you get back.
[Element G] This graph illustrates how your investment could perform. You can compare them with the pay-off graphs of other derivatives.
[Element H] The graph presented gives a range of possible outcomes and is not an exact indication of what you might get back. What you get will vary depending on how the underlying will develop. For each value of the underlying, the graph shows what the profit or loss of the product would be. The horizontal axis shows the various possible prices of the underlying value on the expiry date and the vertical axis shows the profit or loss.
[Element I] Buying this product holds that you think the underlying price will [increase/decrease].
[Element J] Your maximum loss would be that you will lose all your investment (premium paid).
[Element K] The figures shown include all the costs of the product itself, but may not include all the costs that you pay to your advisor or distributor. The figures do not take into account your personal tax situation, which may also affect how much you get back.
ANNEX VI
METHODOLOGY FOR THE CALCULATION OF COSTS
PART 1
List of costs
I. LIST OF COSTS OF INVESTMENTS FUNDS (AIFs AND UCITS)
Costs to be disclosed
One-off costs
1. A one-off cost is an entry or exit cost which is either:
paid directly by the retail investor; or
deducted from a payment received by or due to the retail investor.
2. One-off costs are costs borne by the retail investor that are not deducted from the assets of the AIF or UCITS.
3. One-off costs include, but are not limited to, the following types of up-front initial costs that shall be taken into account in the cost amount to be disclosed in the key information document:
distribution fee, to the extent that the amount is known to the management company. If the actual amount is not known to the management company, the maximum of the possible known distribution costs for the specific PRIIP shall be shown;
constitution costs (up-front part);
marketing costs (up-front part);
subscription fee including taxes.
Recurring Costs
4. Recurring costs are payments deducted from the assets of an AIF or UCITS, and represent the following:
expenses necessarily incurred in their operations;
any payments, including remunerations, to parties connected with the AIF or UCITS or providing services to them;
transaction costs.
5. Recurring costs include, but are not limited to, the following types of costs that are deducted from the assets of the AIF or UCITS, and shall be taken into account in the cost amount to be disclosed in the key information document:
all payments to the following persons, including any of the following persons to whom they have delegated any function:
the management company of the fund;
directors of the fund if an investment company;
the depositary;
the custodian(s);
any investment adviser;
all payments to any person providing outsourced services to any of the above, including:
providers of valuation and fund accounting services;
shareholder service providers, such as the transfer agent and broker dealers that are record owners of the fund' shares and provide sub-accounting services to the beneficial owners of those shares;
providers of collateral management services;
providers of prime-brokerage services;
securities lending agents;
providers of property management and similar services;
registration charges, listing fees, regulatory charges and similar charges, including passporting fees;
provisioned fees for specific treatment of gain and losses;
audit fees;
payments to legal and professional advisers;
any costs of distribution or marketing, to the extent that the amount is known to the management company. If the actual amount is not known to the management company, the maximum of the possible known distribution costs for the specific PRIIP shall be shown;
financing costs, related to borrowing (provided by related parties);
costs of capital guarantee provided by a third party guarantor;
payments to third parties to meet costs necessarily incurred in connection with the acquisition or disposal of any asset in the fund's portfolio (including transaction costs as referred to in points 7 to 23 of this Annex);
the value of goods or services received by the management company or any connected person in exchange for placing of dealing orders;
where a fund invests its assets in UCITS or AIFs, its summary cost indicator shall take account of the charges incurred in the UCITS or AIFs. The following shall be included in the calculation:
if the underlying is a UCITS or AIF its most recently available summary cost indicator figure shall be used; this may be the figure published by the UCITS or AIF or its operator or management company, or a figure calculated by a reliable third-party source if more up-to-date than the published figure;
the summary cost indicator may be reduced to the extent that there is any arrangement in place (and that is not already reflected in the fund's profit and loss account) for the investing fund to receive a rebate or retrocession of charges from the underlying AIF or UCITS;
where the acquisition or disposal of units does not occur at the mid price of the UCITS or AIF, the value of the difference between the transaction price and the mid price shall be taken into account as transaction costs, to the extent that this is not included in the summary cost indicator;
where a fund invests in a PRIIP other than UCITS or AIFs, its summary cost indicator shall take account of the charges incurred in the underlying PRIIP. The following shall be included in the calculation:
the most recently available summary cost indicator of the underlying PRIIP shall be included in the calculation;
the summary cost indicator may be reduced to the extent that there is any arrangement in place (and that is not already reflected in the fund's profit and loss account) for the investing fund to receive a rebate or retrocession of charges from the underlying PRIIP;
in cases where the acquisition or disposal of units does not occur at the mid price of the underlying PRIIP, the value of the difference between the transaction price and the mid price shall be taken into account as transaction costs, to the extent that this is not included in the summary cost indicator;
where a fund invests in an investment product other than a PRIIP its summary cost indicator shall take account of the charges incurred in the underlying investment product. The PRIIP manufacturer shall either use any published information that represents a reasonable substitute for summary cost indicator or else shall make a best estimate of its maximum level based on scrutiny of the investment product's current prospectus and most recently published report and accounts;
operating costs (or any remuneration) under a fee-sharing arrangement with a third party to the extent that they have not been already included in another type of cost mentioned above;
earnings from efficient portfolio management techniques if they are not paid into the portfolio;
implicit costs incurred by structured funds as referred to in section II of this Annex, and notably points 36 to 46 of this Annex;
dividends served by the shares held in the portfolio of the funds, shall the dividends not accrue to the fund.
Incidental costs
6. The following types of incidental costs shall be taken into account in the amount to be disclosed:
a performance–related fee payable to the management company or any investment adviser, including performance fees as referred to in point 24 of this Annex;
carried interests as referred to in point 25 of this Annex.
Calculation of specific types of costs of investments funds
Transaction costs
7. Transaction costs shall be calculated on an annualised basis, based on an average of the transaction costs incurred by the PRIIP over the previous three years. Where the PRIIP has been operating for less than three years, transaction costs shall be calculated using the methodology set out in point 21 of this Annex.
8. The aggregate transaction costs for a PRIIP shall be calculated as the sum of the transaction costs as calculated in accordance with points 9 to 23 of this Annex in the base currency of the PRIIP for all individual transactions undertaken by the PRIIP in the specified period. This sum shall be converted into a percentage by dividing by the average net assets of the PRIIP over the same period.
9. When calculating the transaction costs incurred by the PRIIP over the previous three years, actual transaction costs must be calculated using the methodology described in points 12 to 18 of this Annex for investments in the following instruments:
transferable securities as defined by Article 2 of Commission Directive 2007/16/EC ( 11 );
other instruments that there are frequent opportunities to dispose of, redeem, or otherwise realise at prices that are publicly available to market participants and that are either market prices or prices made available, or validated, by valuation systems independent of the issuer.
10. Estimates of transaction costs using the methodology described below in points 19 to 20 of this Annex must be used for investments in other instruments or assets.
Treatment of anti-dilution mechanisms
11. Where a PRIIP has a pricing mechanism that offsets the impact of dilution from transactions in the PRIIP itself, the amount of benefit accruing to the ongoing holders of the PRIIP from anti-dilution mechanisms may be deducted from the transaction costs incurred within the PRIIP using the following methodology:
the monetary amount of any anti-dilution levy, or other payment in connection with a transaction in the PRIIP itself, that is paid to the PRIIP may be subtracted from the total transaction costs
the benefit to the PRIIP of issuing units (or otherwise enabling investment in the PRIIP) at a price other than the mid price, or of cancelling units (or otherwise enabling redemption of funds from the PRIIP) at a price other than the mid price, provided that the PRIIP itself receives the benefit, shall be calculated as follows and may be subtracted from the total transaction costs:
the difference between the price of units issued and the mid price, multiplied by the net number of units issued;
the difference between the price of units cancelled and the mid-price, multiplied by the net number of units cancelled.
Actual transaction costs
12. The actual transaction costs for each transaction shall be calculated on the following basis:
for each purchase undertaken by the PRIIP, the price of the instrument at the time the purchase order is transmitted to another person for execution (the purchase ‘arrival price’) shall be subtracted from the net realised execution price of the transaction. The resulting value shall be multiplied by the number of units purchased;
for each sale undertaken by the PRIIP, the net realised execution price of the transaction shall be subtracted from the price of the instrument at the time the order to sell is transmitted to another person for execution (the sale ‘arrival price’). The resulting value shall be multiplied by the number of units sold.
13. The net realised execution price shall be determined as the price at which the transaction is executed, including all charges, commissions, taxes and other payments (such as anti-dilution levies) associated with the transaction, either directly or indirectly, where those payments are made from the assets of the PRIIP.
14. The arrival price shall be determined as the mid-market price of the investment at the time when the order to transact is transmitted to another person. For orders that are transacted on a day that is not the day that the order was originally transmitted to another person, the arrival price shall be determined as the opening price of the investment on the day of the transaction or, where the opening price is not available, the previous closing price. Where a price is not available at the time when the order to transact is transmitted to another person (due to the order initiated outside market opening hours or in over-the-counter markets where there is no transparency of intra-day prices for example), the arrival price shall be determined as the opening price on the day of the transaction or, where the opening price is not available, the previous closing price. Where an order is executed without being transmitted to another person, the arrival price shall be determined as the mid-market price of the investment at the time when the transaction was executed.
15. Where information about the time when the order to transact is transmitted to another person is not available (or not available to a sufficient level of accuracy), or where information about the price at that time is not available, it is permissible to use as the arrival price the opening price of the investment on the day of the transaction or, where the opening price is not available, the previous closing price. When calculating transaction costs using data prior to 31 December 2017, intra-day prices may be considered as not available.
16. Costs associated with transactions undertaken by PRIIPs and concerning financial instruments that fall within one of the categories referred to in items 4 to 10 of Section C of Annex I to Directive 2014/65/EU shall be calculated in the following way:
for instruments that are standardised and where there is regular trading in the instrument itself (for example an index future on a major equity index), transaction costs shall be calculated with reference to the instrument itself. The arrival price shall be determined as the mid-price of the instrument;
for linear instruments that are customised, and where there is no price transparency or regular trading in the instrument itself, transaction costs shall be calculated with reference to the underlying asset(s). The arrival price shall be calculated based on the price(s) of the underlying assets, using appropriate weightings if there is more than one underlying asset. Where the cost of transacting in the instrument is materially higher than the cost of transacting in the underlying asset, this must be reflected in the transaction cost calculation;
for non-linear instruments, it is permissible to calculate the transaction costs as the difference between the price paid or received for the instruments and the fair value of the instrument, on the basis described in points 36 to 46 of this Annex.
17. In calculating the costs associated with foreign exchange, the arrival price must reflect a reasonable estimate of the consolidated price, and must not simply be the price available from a single counterparty or foreign exchange platform, even if an agreement exists to undertake all foreign exchange transactions with a single counterparty.
18. In calculating the costs associated with orders that are initially entered into an auction, the arrival price shall be calculated as the mid-price immediately prior to the auction.
Transaction costs for other assets
19. When estimating transaction costs for assets other than assets as referred to in point 9 of this Annex, the methodology in point 12 of this Annex shall be used and the arrival price shall be calculated as follows:
for a sale:
the arrival price shall be calculated as the previous independent valuation price of the asset, adjusted for market movements, where appropriate, using an appropriate benchmark index;
where a previous independent valuation price is not available, the transaction costs must be estimated based on the difference between the transaction price and an appraisal of the fair value of the asset prior to sale;
for a purchase:
the arrival price shall be calculated as the previous independent valuation price of the asset, adjusted for market movements, where appropriate, using an appropriate benchmark index, where such a price is available;
where a previous independent valuation price is not available, the transaction costs must be estimated based on the difference between the transaction price and an appraisal of the fair value of the asset prior to purchase.
20. The transaction cost estimate must not be less than the amount of actual identifiable costs directly associated with the transaction.
Transaction costs for new PRIIPs
21. For PRIIPs that have been operating for less than 3 years and that invest predominantly in assets as referred to in point 9 of this Annex, transaction costs may be calculated either by multiplying an estimate of portfolio turnover in each asset class with the costs calculated according to the methodology referred to in point (c), or as an average of the actual transaction costs incurred during the period of operation and a standardised estimate on the following basis:
for the highest multiple of six months that the PRIIP has been operating, transaction costs shall be calculated on the basis described in points 12 to 18 of this Annex;
for the remaining period up to three years, transaction costs shall be estimated by multiplying an estimate of portfolio turnover in each asset class according to the methodology referred to in point (c);
the methodology to be used differs depending on the asset class and shall be determined as follows:
For the asset classes indicated in the table below, transaction costs shall be calculated as the average of the estimated cost of transaction (based on bid-ask spreads divided by two) for the relevant asset class under normal market conditions.
To estimate the cost, one or more reference indexes shall be identified for each asset class. Then, the average bid-ask spreads of the underlying indexes shall be collected. The data collected shall refer to the closing bid-ask spread at the tenth business day of each month during the last year.
The bid-ask spreads collected shall then be divided by two to obtain the estimated cost of transaction for each point in time. The average of those values is the estimated cost of transaction in each asset class under normal market conditions.
Asset Classes |
|
Government bonds |
Government bonds and similar instruments developed market rating AAA-A |
Government bonds and similar instruments developed market different rating below A |
|
Government bonds emerging markets (hard and soft currency) |
Government bonds emerging markets (hard and soft currency) |
Investment grade corporate bonds |
Investment grade corporate bonds |
Other corporate bonds |
High yield corporate bonds |
For the asset classes indicated in the table below, transaction costs (including explicit costs and implicit costs) shall be estimated either by using comparable information or by adding estimates of explicit costs to estimates of half the bid-ask spread, using the methodology described in point (i).
Asset Classes |
|
Liquidity |
Money market instruments (for the sake of clarity, money markets funds not included) |
Shares developed markets |
Large-cap shares (developed markets) |
Mid-cap shares (developed markets) |
|
Small-cap shares (developed markets) |
|
Shares emerging markets |
Large-cap shares (emerging markets) |
Mid-cap shares (emerging markets) |
|
Small-cap shares (emerging markets) |
|
Listed derivatives |
Listed derivatives |
For the asset classes indicated in the table below, the transaction cost is the average of the observed cost of transaction (based on bid-ask spreads divided by two) in this asset class under normal market conditions.
When identifying the observed cost of transaction, results of a panel survey may be taken into account.
Asset Classes |
|
OTC |
OTC Exotic options |
OTC Plain vanilla options |
|
OTC IRS, CDS and similar |
|
OTC Swaps and similar instruments (different from IRS, CDS and similar) |
|
OTC FX Forwards developed markets |
|
OTC FX Forwards emerging markets |
22. Estimates of portfolio turnover for a PRIIP that has been operating for less than one year must be made on a consistent basis with the investment policy disclosed in the offering documents. Estimates of portfolio turnover for a PRIIP that has been operating for more than one year must be consistent with actual portfolio turnover.
23. For PRIIPs that have been operating for less than three years and that invest predominantly in assets other than assets as referred to in point 9 of this Annex, the PRIIP manufacturer shall estimate the transaction costs on the basis of the fair value method using comparable assets.
Performance related fees
24. To calculate performance related fees, the following steps shall be taken:
compute the fees on the basis of historical data covering the last 5 years. The average annual performance fees shall be computed in percentage terms,
where a full performance fees history is not available because the fund/share class is new or the fund's terms have changed due to the introduction of the performance fee or the change of one of its parameters, the abovementioned method shall be adjusted according to the following steps:
take the relevant available history of the performance fees of the fund/share class;
for any years for which data is not available, estimate the return of the fund/share class and, in case of a relative performance fee model, take into account the historical series of the benchmark/hurdle rate;
for new funds, their return shall be estimated using the return of a comparable fund or of a peer group. The estimated return shall be gross of all the costs charged to the new fund. Therefore peer groups' returns need to be adjusted by adding the average relevant costs charged according to the rules of the new fund. For instance, in case of a new class with a different fee structure, the returns of this new class shall be adjusted taking into account the costs of the existing class;
compute the fees from the beginning of the sample period, as required in point (a), until the date of availability of the actual performance fee data of the fund, applying the relevant algorithm to the abovementioned historical series;
concatenate both performance fee series to one series over the full sample period as required in point (a);
compute the performance fees using the methodology referred to in point (a) (average of annual performance fees).
Carried interests
25. To calculate carried interests, the following steps shall be taken:
compute the fees on the basis of historical data covering the last 5 years. The average annual carried interests shall be computed in percentage terms;
where a full carried interests history is unavailable because the fund/share class is new or the fund's terms have changed due to the introduction of carried interests or the change of one of its parameters, the abovementioned method shall be adjusted according to the following steps:
take the relevant available history of the carried interests of the fund/share class;
compute the carried interests from the beginning of the sample period, as required in point (a), until the date of availability of the actual carried interests data of the fund, applying the relevant algorithm to the abovementioned historical series;
concatenate both carried interests series to one series over the full sample period as required in point (a);
compute the carried interests using the methodology referred to in point (a) (average of annual carried interests).
26. If no carried interests are taken throughout the investment, a warning needs to accompany the indication of zero carried interests in the composition of costs table in order to clarify that a payment of x % of the final return shall take place subsequently to the exit of the investment.
II. LIST OF COSTS OF PRIPS OTHER THAN INVESTMENT FUNDS
Costs to be disclosed
One-off costs
27. A one-off cost is an entry and exit cost which include initial charges, commissions or any other amount paid directly by the retail investor or deducted from a payment received by or due to the retail investor.
28. One-off costs are borne by a PRIP other than an investment fund, whether they represent expenses necessarily incurred in its operation, or the remuneration of any party connected with it or providing services to it.
One-off entry costs and charges
29. One-off entry costs and charges include, but are not limited to, the following types that shall be taken into account in the cost amount to be disclosed for PRIPs other than investment funds:
sales commissions;
structuring costs, including market-making costs (spread) and settlement costs;
hedging costs (to ensure that the PRIIP manufacturer is able to replicate the performance of the derivative component of the structured product — these costs include transaction costs)
legal fees;
costs for capital guarantee;
implicit premium paid to the issuer.
One-off exit costs and charges
30. One-off exit costs and charges include, but are not limited to, the following types that shall be taken into account in the amount to be disclosed for PRIPs other than investment funds:
proportional fees;
bid-mid spread to sell the product and any explicit costs or penalties for early exit applicable. The estimation of the bid-mid spread shall be done in relation to the availability of a secondary market, to the market conditions and the type of product. In the situation where the PRIIP manufacturer (or a related third party) is the only available counterparty to buy the product on the secondary market, it shall estimate the exit costs to be added to the fair value of the product according to its internal policies;
contract-for-difference (CFD) related costs such as:
commissions charged by CFD providers — general commission or a commission on each trade — i.e. on opening and closing a contract;
CFD trading such as bid-ask spreads, daily and overnight financing costs, account management fees and taxes which are not already included in the fair value.
Recurring Costs
31. Recurring costs are payments regularly deducted from all payments due to the retail investor or from the amount invested.
32. Recurring costs include all types of cost borne by a PRIP other than an investment fund whether they represent expenses necessarily incurred in its operation, or the remuneration of any party connected with it or providing services to it.
33. The following list is indicative but not exhaustive of the types of recurring charge that, where they are deducted or charged separately, shall be taken into account in the amount to be disclosed:
costs related to coupon payments;
costs of the underlying, if any.
Costs of PRIPs referred to in point 17 of Annex IV
34. One-off exit costs and charges are exchange fees, clearing fees and settlement fees where known.
35. Recurring costs are hedging costs borne under normal market conditions and stressed market conditions.
Calculation of implicit costs of PRIPs other than investment funds
36. For the purposes of the calculation of the implicit costs embedded in PRIPs, the PRIIP manufacturer shall refer to the issue price and, after the subscription period, to the price available to purchase the product on a secondary market.
37. The difference between the price and the fair value of the product is considered as an estimation of the total entry costs included in the price. If the PRIIP manufacturer is unable to distinguish the relevant implicit costs to be disclosed as referred to in point 29 of this Annex using the difference between the price and the fair value, it shall liaise with the issuer of the different components of the product, or the relevant body, in order to gather the relevant information on those costs.
38. Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction in the principal (or most advantageous) market at the measurement date under current market conditions (i.e. an exit price) regardless of whether that price is directly observable or estimated using another valuation technique.
39. The fair value policy that governs the measurement of the fair value shall set a series of rules including in the following areas:
governance;
methodology for the calculation of the fair value.
40. The rules referred to in point 39 of this Annex shall aim at outlining a valuation process that:
complies with the applicable accounting standards, in relation to fair value;
makes sure that internal pricing models for PRIPs are consistent with the methodologies, modelling and standards used by the PRIIP manufacturer to value its own portfolio under the hypothesis that the product is available for sale or held for trading;
is consistent with the level of complexity of the product and the type of underlying;
takes into account the issuer credit risk and the uncertainty about the underlying;
sets the parameters to identify an active market in order to avoid risk mispricing that could lead in extreme cases to significantly inaccurate estimates;
maximises the use of relevant observable market inputs and minimizes the use of unobservable inputs.
41. The fair value of a structured product shall be determined on the basis of:
market prices, where available or efficiently formed;
internal pricing models using as an input market values which are indirectly connected to the product, derived from products with similar characteristics (comparable approach);
internal pricing models based on inputs which are not derived directly from market data for which estimations and assumptions must be formulated (mark-to-model approach).
42. If the fair value cannot be derived from market prices, it shall be calculated using a valuation technique that is able to represent properly the different factors affecting the product payoff structure making maximum use of market data.
43. The valuation technique referred to in point 42 of this Annex shall consider the following according to the complexity of the product:
the use of recent arm's length market transactions between knowledgeable, professional counterparties;
reference to the current market price of another instrument that is substantially the same;
the use of an appropriate discounted cash-flow model where the likelihood of each cash flow is determined using an appropriate model of asset price evolution.
44. In the case of subscription products, the fair value shall be calculated on the date when the product terms are determined. This valuation date shall be close to the beginning of the subscription period. Where long offering periods or high market volatility exists, a criterion to update cost information shall be defined.
45. Where preliminary terms are used, costs shall be calculated by using the minimum terms of the product.
46. Where variable subscription prices are used, a procedure on how to incorporate and disclose the cost effect of the varying subscription price shall be defined.
III. LIST OF COSTS OF INSURANCE-BASED INVESTMENT PRODUCTS
Costs to be disclosed
One-off costs
47. A one-off cost is an entry and exit cost which includes initial charges, commissions or any other amount paid directly by the retail investor or deducted from the first payment or from a limited number of payments due to the retail investor or from a payment upon redemption or termination of the product.
48. One-off costs are borne by an insurance-based investment product, whether they represent expenses necessarily incurred in its operation, or the remuneration of any party connected with it or providing services to it.
49. One-off costs include, but are not limited to, the following types of entry costs and charges that shall be taken into account in the amount to be disclosed for insurance-based investment products:
structuring or marketing costs;
acquisition, distribution, sales costs;
processing/operating costs (including costs for the management of the insurance cover);
cost part of biometric risk premiums referred to in point 59 of this Annex;
costs of holding required capital (up front part to be disclosed insofar as they are charged).
Recurring costs
50. Recurring costs are payments regularly deducted from all payments from the retail investor or from the amount invested or amounts that are not allocated to the retail investor according to a profit sharing mechanism.
51. The recurring costs include all types of costs borne by an insurance-based investment product whether they represent expenses necessarily incurred in its operation, or the remuneration of any party connected with it or providing services to it.
52. The following list is indicative but not exhaustive of the types of recurring charge that shall be taken into account in the amount of the ‘Other ongoing costs’ in table 2 of Annex VII:
structuring or marketing costs;
acquisition, distribution, sales costs;
processing/operating costs (including costs for the management of insurance cover);
cost part of biometric risk premiums referred to in point 59 of this Annex;
other administrative costs;
costs of holding capital (recurring part to be disclosed insofar as they are charged);
any amount implicitly charged on the amount invested such as the costs incurred for the management of the investments of the insurance company (deposit fees, costs for new investments, etc.);
payments to third parties to meet costs necessarily incurred in connection with the acquisition or disposal of any asset owned by the insurance-based investment product (including transaction costs as referred to in points 7 to 23 of this Annex).
53. Where an insurance-based investment product invests a part of its assets in UCITS or AIFs, in a PRIIP other than UCITS or AIFs or in an investment product other than a PRIIP, points 5(l), 5(m) and 5(n) of this Annex shall be applied respectively.
Cost disclosure of the biometric risk premium of insurance based investment products
Costs part of biometric risk premiums
54. Biometric risk premiums are those premiums paid directly by the retail investor or deducted from the amounts credited to the mathematical provision or from the participation bonus of the insurance policy, that are intended to cover the statistical risk of benefit payments from insurance coverage.
55. The fair value of biometric risk premiums is the expected present value, according to the interest rates referred to in point 71(a) of this Annex, of the future benefit payments from insurance coverage taking into account the following:
best estimate assumptions on these benefit payments derived from the individual risk profile of the portfolio of the individual manufacturer;
other payoffs related to insurance cover (rebates on biometric risk premiums paid back to the the retail investors, increase of benefit payments, reduction of future premiums, etc.) resulting from profit sharing mechanisms (legal and/or contractual).
56. Best estimate assumptions on future benefit payments from insurance coverage shall be set in a realistic way.
57. The estimated future benefit payments shall not include prudency margins or costs for the management of the insurance cover.
58. For manufacturers within the scope of Directive 2009/138/EC these best estimate assumptions shall be consistent with the respective assumptions used for the calculation of the technical provisions in the Solvency II balance sheet.
59. The cost part of biometric risk premiums is the difference between biometric risk premiums charged to the retail investor referred to in point 54 of this Annex and the fair value of the biometric risk premiums referred to in point 55 of this Annex.
60. A PRIIP manufacturer may include the full biometric risk premiums in the calculation of one-off costs or recurring costs in the place of the cost part of those premiums.
PART 2
Summary cost indicators and compound effect of the costs
I. SUMMARY COST INDICATORS
61. The summary cost indicator of the PRIIP is the reduction of the yield due to total costs calculated in accordance with points 70 to 72 of this Annex.
62. For the calculation of the summary cost indicator the costs to be disclosed referred to in point 72 of this Annex shall be the total costs. This shall equal for investment funds the sum of the costs as referred to in points 1 and 2 of this Annex plus the sum of the costs as referred to in points 4 and 6 of this Annex; for PRIPs other than investment funds, except PRIIPs referred in point 17 of Annex IV, the sum of the costs as referred to in points 27 and 28 of this Annex plus the sum of the costs as referred to in points 31 and 32 of this Annex; for PRIIPs referred to in point 17 of Annex IV, the sum of the costs as referred to in points 34 and 35 of this Annex; and for insurance-based investment products, the sum of the costs as referred to in points 47 and 48 plus the sum of the costs as referred to in points 50 and 51 of this Annex. The total costs shall also include exit penalties, where relevant.
One-off costs and one-off costs ratios
63. The entry and exit costs ratio of the PRIIP shall be the reduction of the annual yield due to entry and exit costs calculated according to points 70 to 72 of this Annex.
64. For the calculation of the entry and exit costs ratio the costs to be disclosed referred to in point 72 of this Annex shall for investments funds be the entry and exit costs according to points 1 and 2 of this Annex; points 27 and 28 of this Annex for PRIPs other than investment funds, except PRIIPs referred in point 17 of Annex IV; point 35 for PRIIPs referred in point 17 of Annex IV; and points 47 and 48 of this Annex for insurance-based investment products. Exit costs shall also include exit penalties, where relevant.
Recurring costs, portfolio transaction costs and insurance costs/other recurring costs ratios
65. The portfolio transaction costs, insurance costs and other recurring costs ratio of the PRIIP shall be the reduction of the annual yield due to portfolio transaction costs and other recurring costs calculated according to points 70 to 72 of this Annex.
66. For the calculation of the portfolio transaction costs ratio and the insurance costs ratio the following shall apply:
for the calculation of the portfolio transaction, the costs to be disclosed referred to in point 72 shall be the portfolio transaction costs according to points 7 to 23 of this Annex for investment funds, point 29(c) of this Annex for PRIPs other than investment funds, except PRIIPs referred in point 17 of Annex IV, and point 52(h) of this Annex for insurance based investment products;
for the calculation of the insurance costs ratio, the costs to be disclosed referred to in point 72 of this Annex shall be the insurance costs according to points 59 and 60 of this Annex for insurance based investment products.
67. The other recurring costs ratio shall be the reduction of the annual yield due to other recurring costs that is calculated as the difference between the summary cost indicator according to point 61 of this Annex and the sum of the one-off costs ratio, according to point 63 of this Annex, plus portfolio transaction costs ratio, according to point 66(a), plus insurance costs ratio, according to point 66(b) of this Annex, plus the incidental costs ratios, according to point 68 of this Annex.
Incidental costs and incidental costs ratios (performance fees and carried interests ratio)
68. For the calculation of the performance fees ratio, the cost to be disclosed referred to in point 72 shall be the portfolio incidental costs according to point 6(a) of this Annex for investment funds. For the calculation of the carried interests ratio, the cost to be disclosed referred to in point 72 of this Annex shall be the portfolio incidental costs according to point 6(b) of this Annex for investment funds.
69. The ‘ongoing costs’, ‘performance fees’ and ‘carried interests’ as referred to in Annex VII are respectively the ‘recurring costs’, ‘performance fees ratio’ and ‘carried interests ratio’ as referred to in this Annex and in Article 5.
Calculation of summary cost indicator
70. The summary cost indicator shall be calculated as the difference between two percentages i and r where r is the annual internal rate of return in relation to gross payments by the retail investor and estimated benefit payments to the retail investor during the recommended holding period and i is the annual internal rate of return for the respective cost free scenario.
71. The estimation of future benefit payments under point 70 of this Annex shall be based on the following assumptions:
except for PRIIPs as referred to in point 17 of Annex IV, the annual internal rate of return, i.e. the performance, of the PRIIP shall be calculated applying the methodology and the underlying hypothesis used for the estimation of the moderate scenario from the performance scenarios section of the key information document;
the benefit payments shall be estimated under the assumption that all costs included in the total costs according to point 62 of this Annex are deducted;
for PRIIPs as referred to in point 17 of Annex IV and for UCITS or non-UCITS funds for which PRIIP manufacturers use the key investor information document in accordance with Article 14(2) of this Regulation, the performance shall be 3 %.
72. For the purpose of the calculation of the cost free scenario as referred to in point 70 of this Annex the following shall apply:
for the calculation of i either gross payments by the retail investor from the calculation of r shall be reduced by the costs to be disclosed or the projected benefit payments to the retail investor from the calculation of r shall be increased under the assumption that the amounts of the costs to be disclosed had additionally been invested. Then i is the annual internal rate of return in relation to these adjusted payments by and to the retail investor;
where costs to be disclosed can be expressed as a constant percentage of the value of the assets they may be disregarded in the calculation described in point 72(a) of this Annex and instead be added to the percentage of the annual internal rate of return i for the respective cost free scenario afterwards.
Specific requirements for PRIPs other than investment funds
73. For the purpose of the calculation of the cost free scenario as referred to in point 70 of this Annex for PRIPs other than investment funds, gross payments by the retail investor from the calculation of r, as referred to in point 72 of this Annex, shall be reduced by the costs to be disclosed.
Specific requirements for insurance-based investment products
74. For the purpose of the calculations described in points 70 to 72 of this Annex, it shall be assumed that, for insurance-based investment products, no payments resulting from insurance coverage occur during the holding period. That is to say, the calculation of the summary cost indicator shall be solely based on estimated endowment benefit payments.
75. To the extent recurring and one-off costs are covered by explicit costs that are a fixed part of the premium calculation of the product the calculation of recurring and one-off costs shall be based on these explicit costs.
76. For profit participation for insurance based investment products the following shall apply:
when calculating recurring costs and one-off costs for insurance-based investment products amounts retained from the investment return through profit sharing mechanisms shall be considered as costs;
where a part of the costs is returned to retail investors by separate cost bonuses this shall be considered as a cost rebate that reduces cost deductions provided:
that the cost bonuses are declared separately from other parts of the participation bonus and are intended for refunding parts of the costs by the contractual terms of the product.
that the PRIIP manufacturer can substantiate on the basis of sound actuarial methods that expected future cost bonuses are covered by expected future profits that result from prudent assumptions on future costs.
Calculation of ratios
Anti-double counting principle
77. If one type of cost is covered by two or more types of costs as referred to in this Annex, that type of cost shall only be accounted for once in the calculation of the indicators (ratios) which are based on it.
Other specifications
78. The ratios shall be expressed as a percentage to two decimal places.
79. The ratios shall be calculated at least once a year.
80. The ratios shall be based on the most recent cost calculations which the PRIIP manufacturer has determined. Without prejudice to point 77 of this Annex, the costs are assessed on an ‘all taxes included’ basis.
As for investment funds the following shall apply:
a separate calculation shall be performed for each share class, but if the units of two or more classes rank pari passu, a single calculation may be performed for them;
in the case of a fund which is an umbrella, each constituent compartment or sub-fund shall be treated separately for the purpose of this Annex, but any charges attributable to the fund as a whole shall be apportioned among all of the sub-funds on a basis that is fair to all investors.
81. Apart from the first calculation for a new PRIIP, and if not stated otherwise, the ratios shall be calculated at least once a year, on an ex-post basis. Where it is considered unsuitable to use the ex-post figure because of a material change, an estimate may be used instead until reliable ex-post figures reflecting the impact of the material change become available.
82. The ex-post figures shall be based on recent cost calculations which the PRIIP manufacturer has determined on reasonable grounds to be appropriate for that purpose. The figures may be based on the costs set out in the PRIIP's statement of operations published in its latest annual or half-yearly report, if that statement is sufficiently recent. It it is not sufficiently recent, a comparable calculation based on the costs charged during a more recent 12-month period shall be used instead.
83. Information about the ratios that were applicable during previous years/periods shall be published at the location which is specified in the key information document as the general source of further information for investors who require it.
84. Where the costs attributable to an underlying UCITS or AIF are to be taken into account the following shall apply:
the cost indicator of each underlying UCITS or AIF shall be pro-rated according to the proportion of the PRIIP's net asset value which that UCITS or AIF represents at the relevant date being the date at which the PRIIP's figures are taken;
all the pro-rated figures shall be added to the total cost figure of the investing PRIIP itself, thus presenting a single total.
Calculation methodology for new PRIIPs
85. In place of ex-post data, estimates shall be used in the calculation of the different types of costs. Such estimates shall be carried out by adopting as proxies either a comparable PRIIP or a peer group.
86. For PRIIPs which charge a fixed all-inclusive fee, that fee shall be used provided it includes all costs to be presented under the PRIIPs cost disclosure requirements.
87. For PRIIPs which set a cap or maximum on the amount that can be charged, and provided it includes all costs to be presented under the PRIIPs cost disclosure requirements, that cap or maximum shall be used instead so long as the PRIIP manufacturer gives a commitment to respect the published figure and to absorb any costs that would otherwise cause it to be exceeded.
88. If, in the PRIIP manufacturer's opinion, expressing a figure to two decimal places would be likely to suggest a spurious degree of accuracy to investors, it shall be sufficient to express that figure to one decimal place.
89. The PRIIP manufacturer shall ensure that the accuracy of the estimated figure is kept under review. The PRIIP manufacturer shall determine when it is appropriate to begin using ex-post figures rather than an estimate; but in any case it shall, no later than 12 months after the date on which the PRIIP was first offered for sale in any Member State, review the accuracy of the estimate by calculating a figure on an ex-post basis.
II. COMPOUND EFFECT OF THE COSTS
Common requirements to all types of PRIIPs
90. The table(s) referred to in Article 5 shall contain an indication of the total costs in monetary and percentage terms for the case that the retail investor invests, respectively 10 000 EUR (for all PRIIPs except regular premium insurance-based investment products), or 1 000 EUR yearly (for regular premium insurance-based investment products) during different holding periods, including the recommended holding period. The holding periods to be shown are those referred to in points 14 to 16 of Annex IV. Where a product is considered not to have an alternative liquidity facility promoted by the PRIIP manufacturer or a third party, or where there is an absence of liquidity arrangements, or for those PRIIPs as referred to in point 17 of Annex IV, that indication of costs may be shown only at maturity or at the end of the recommended holding period.
91. Where the currency of the PRIIP is not in Euros, an amount of a similar magnitude to those set out in point 90 of this Annex and which is cleanly divisible by 1 000 shall be used.
92. The total costs shall include one-off, recurring and incidental costs, and, where relevant, exit penalties.
93. Exit penalties are to be distinguished from other exit costs which have to be paid in any case and therefore always need to be included in the one-off costs.
94. The relevance of exit penalties depends on the holding period of the investment and the exact moment when the product is cashed in. Exit penalties are not relevant if the investment is kept for the recommended holding period.
ANNEX VII
PRESENTATION OF COSTS
The Reduction in Yield (RIY) shows what impact the total costs you pay will have on the investment return you might get. The total costs take into account one-off, ongoing and incidental costs.
The amounts shown here are the cumulative costs of the product itself, for three different holding periods. They include potential early exit penalties. The figures assume you invest [EUR 10 000 (OR EUR 1 000 each year for regular premium PRIIPs)]. The figures are estimates and may change in the future.
Table 1
Cost over time
The person selling you or advising you about this product may charge you other costs. If so, this person will provide you with information about these costs, and show you the impact that all costs will have on your investment over time.
Table 2
Composition of costs
The table below shows:
For PRIIPs offering a range of options for investment, PRIIP manufacturers shall use the table 1 and table 2 of this Annex for the presentation of the costs, showing for each of the figures in each table, as relevant, the range of the costs.
( 1 ) Directive (EU) 2016/97 of the European Parliament and of the Council of 20 January 2016 on insurance distribution (OJ L 26, 2.2.2016, p. 19).
( 2 ) Directive 2014/65/EU of the European Parliament and of the Council of 15 May 2014 on markets in financial instruments and amending Directive 2002/92/EC and Directive 2011/61/EU (OJ L 173, 12.6.2014, p. 349).
( 3 ) Regulation (EU) No 600/2014 of the European Parliament and of the Council of 15 May 2014 on markets in financial instruments and amending Regulation (EU) No 648/2012 (OJ L 173, 12.6.2014, p. 84).
( 4 ) Directive 2014/65/EU of the European Parliament and of the Council of 15 May 2014 on markets in financial instruments and amending Directive 2002/92/EC and Directive 2011/61/EU (OJ L 173, 12.6.2014, p. 349).
( 5 ) Regulation (EC) No 1060/2009 of the European Parliament and of the Council of 16 September 2009 on credit rating agencies (OJ L 302, 17.11.2009, p. 1).
( 6 ) Commission Implementing Regulation (EU) 2016/1800 of 11 October 2016 laying down implementing technical standards with regard to the allocation of credit assessments of external credit assessment institutions to an objective scale of credit quality steps in accordance with Directive 2009/138/EC of the European Parliament and of the Council (OJ L 275, 12.10.2016, p. 19).
( 7 ) Directive 2011/61/EU of the European Parliament and of the Council of 8 June 2011 on Alternative Investment Fund Managers and amending Directives 2003/41/EC and 2009/65/EC and Regulations (EC) No 1060/2009 and (EU) No 1095/2010 (OJ L 174, 1.7.2011, p. 1).
( 8 ) Directive 2014/91/EU of the European Parliament and of the Council of 23 July 2014 amending Directive 2009/65/EC on the coordination of laws, regulations and administrative provisions relating to undertakings for collective investment in transferable securities (UCITS) as regards depositary functions, remuneration policies and sanctions (OJ L 257, 28.8.2014, p. 186).
( 9 ) Directive 2009/138/EC of the European Parliament and of the Council of 25 November 2009 on the taking-up and pursuit of the business of Insurance and Reinsurance (Solvency II) (OJ L 335, 17.12.2009, p. 1).
( 10 ) Regulation (EU) No 575/2013 of the European Parliament and of the Council of 26 June 2013 on prudential requirements for credit institutions and investment firms and amending Regulation (EU) No 648/2012 (OJ L 176, 27.6.2013, p. 1).
( 11 ) Commission Directive 2007/16/EC of 19 March 2007 implementing Council Directive 85/611/EEC on the coordination of laws, regulations and administrative provisions relating to undertakings for collective investment in transferable securities (UCITS) as regards the clarification of certain definitions (OJ L 79, 20.3.2007, p. 11).