This document is an excerpt from the EUR-Lex website
Document 01976L0761-20070101
Council Directive of 27 July 1976 on the approximation of the laws of the Member States relating to motor vehicle headlamps which function as main-beam and/or dipped-beam headlamps and to light sources (filament lamps and others) for use in approved lamp units of motor vehicles and of their trailers (76/761/EEC)
Consolidated text: Council Directive of 27 July 1976 on the approximation of the laws of the Member States relating to motor vehicle headlamps which function as main-beam and/or dipped-beam headlamps and to light sources (filament lamps and others) for use in approved lamp units of motor vehicles and of their trailers (76/761/EEC)
Council Directive of 27 July 1976 on the approximation of the laws of the Member States relating to motor vehicle headlamps which function as main-beam and/or dipped-beam headlamps and to light sources (filament lamps and others) for use in approved lamp units of motor vehicles and of their trailers (76/761/EEC)
1976L0761 — EN — 01.01.2007 — 008.001
This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents
COUNCIL DIRECTIVE of 27 July 1976 ►M3 on the approximation of the laws of the Member States relating to motor vehicle headlamps which function as main-beam and/or dipped-beam headlamps and to light sources (filament lamps and others) for use in approved lamp units of motor vehicles and of their trailers ◄ (OJ L 262, 27.9.1976, p.96) |
Amended by:
|
|
Official Journal |
||
No |
page |
date |
||
L 192 |
43 |
11.7.1987 |
||
L 265 |
15 |
12.9.1989 |
||
COMMISSION DIRECTIVE 1999/17/EC Text with EEA relevance of 18 March 1999 |
L 97 |
45 |
12.4.1999 |
|
L 363 |
81 |
20.12.2006 |
Amended by:
L 291 |
17 |
19.11.1979 |
||
L 302 |
23 |
15.11.1985 |
||
C 241 |
21 |
29.8.1994 |
||
|
(adapted by Council Decision 95/1/EC, Euratom, ECSC) |
L 001 |
1 |
.. |
L 236 |
33 |
23.9.2003 |
COUNCIL DIRECTIVE
of 27 July 1976
►M3 on the approximation of the laws of the Member States relating to motor vehicle headlamps which function as main-beam and/or dipped-beam headlamps and to light sources (filament lamps and others) for use in approved lamp units of motor vehicles and of their trailers ◄
(76/761/EEC)
THE COUNCIL OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament ( 1 ),
Having regard to the opinion of the Economic and Social Committee ( 2 ),
Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate inter alia to headlamps which function as main-beam and/or dipped-beam headlamps and their filament lamps;
Whereas these requirements differ from one Member State to another; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules, in order, in particular, to allow the EEC type-approval procedure which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers ( 3 ), to be introduced in respect of each type of vehicle;
Whereas in Directive 76/756/EEC ( 4 ), the Council laid down the common requirements for the installation of lighting and light-signalling devices on motor vehicles and their trailers;
Whereas a harmonized type-approval procedure for headlamps which function as main-beam and/or dipped-beam headlamps and their filament lamps makes it possible for each Member State to check compliance with the common construction and testing requirements and to inform the other Member States of its findings by sending a copy of the component type-approval certificate completed for each type of such headlamp or filament lamp; whereas the placing of an EEC component type-approval mark on all headlamp devices manufactured in conformity with the approved type obviates any need for technical checks on these headlamp devices in the other Member States;
Whereas it is desirable to take into account the technical requirements adopted by the UN Economic Commission for Europe in its Regulations No 1 (‘Uniform provisions for the approval of motor vehicle headlights emitting an asymmetrical passing beam or a driving beam or both’) ( 5 ) and No 2 (‘Uniform provisions concerning approval of incandescent electrical lamps for headlights emitting an asymmetrical passing beam or a driving beam or both’) ( 6 ), which are annexed to the Agreement of 20 March 1958 concerning the adoption of uniform conditions for approval and reciprocal recognition of approval for motor vehicles equipment and parts;
Whereas the approximation of national laws relating to motor vehicles entails reciprocal recognition by Member States of the checks carried out by each of them on the basis of the common requirements,
HAS ADOPTED THIS DIRECTIVE:
Article 1
1. Each Member State shall grant EC component type-approval for any type of headlamp which functions as a main-beam and/or dipped-beam headlamp and for any type of light source (filament lamp(s) and other(s)) for use in approved lamp units which satisfy the construction and testing requirements laid down in the relevant Annexes.
2. The Member State which has granted EEC component type-approval shall take the measures required in order to verify that production models conform to the approved type, in so far as this is necessary and if need be in cooperation with the competent authorities in the other Member States. Such verification shall be limited to spot checks.
Article 2
Member States shall, for each type of headlamp which functions as a main-beam and/or dipped-beam headlamp or for each type of light source (filament lamp(s) and other(s)) for use in approved lamp units which they approve pursuant to Article 1, issue to the manufacturer an EC component type-approval mark conforming to the model shown in Annex I, Appendix 5.
Member States shall take all appropriate measures to prevent the use of marks liable to create confusion between headlamps which function as main-beam and/or dipped-beam headlamps and light source(s) (filament lamp(s) and other(s)) for use in approved lamp units which have been type-approved pursuant to Article 1, and other devices.
Article 3
1. No Member State may prohibit the placing on the market of headlamps which function as main-beam and/or dipped-beam headlamps and light source(s) (filament lamp(s) and other(s)) for use in approved lamp units on grounds relating to their construction or method of functioning, if they bear the EC component type-approval mark.
2. A Member State may prohibit the placing on the market of headlamps which function as main-beam and/or dipped-beam headlamps and light source(s) (filament lamp(s) and other(s)) for use in approved lamp units bearing the EC component type-approval mark which consistently fail to conform to the approved type.
That State shall forthwith inform the other Member States and the Commission of the measures taken, specifying the reasons for its decision.
Article 4
The competent authorities of the Member States shall inform each other, by means of the procedure specified in Article 4(6) of Directive 70/156/EEC, of each approval which they have granted, refused or withdrawn pursuant to this Directive.
Article 5
1. ►M3 If the Member State which has granted EC component type-approval finds that a number of headlamps which function as main-beam and/or dipped-beam headlamps or light source(s) (filament lamp(s) and other(s)) for use in approved lamp units bearing the same EC component type-approval mark do not conform to the type which it has approved, it shall take the necessary measures to ensure that production models conform to the approved type. ◄ The competent authorities of that State shall advise those of the other Member States of the measures taken, which may, where there is consistent failure to conform, extend to withdrawal of EEC component type-approval. The said authorities shall take the same measures if they are informed by the competent authorities of another Member State of such failure to conform.
2. The competent authorities of Member States shall within one month inform each other of any withdrawal of EEC component type-approval, and of the reasons for such a measure.
Article 6
►M3 Any decision taken pursuant to the provisions adopted in implementation of this Directive to refuse or withdraw EC component type-approval for a main-beam or a dipped-beam headlamp or for a light source(s) (filament lamp(s) and other(s)) for use in approved lamp units or prohibit their placing on the market or use shall set out in detail the reasons on which it is based. ◄ Such decision shall be notified to the party concerned, who shall at the same time be informed of the remedies available to him under the laws in force in the Member States and of the time limits allowed for the exercise of such remedies.
Article 7
No Member State may refuse to grant EC type-approval or national type-approval of a vehicle on grounds relating to its headlamps which function as main-beam and/or dipped-beam headlamps or to the light source(s) (filament lamp(s) and other(s)) for use in approved lamp units if these bear the EC component type-approval mark and are fitted in accordance with the requirements laid down in Directive 76/756/EEC.
Article 8
No Member State may refuse or prohibit the sale or registration, entry into service or use of a vehicle on grounds relating to its headlamps which function as main-beam and/or dipped-beam headlamps or to the light source(s) (filament lamp(s) and other(s)) for use in approved lamp units if these bear the EC component type-approval mark and are fitted in accordance with the requirements laid down in Directive 76/756/EEC.
Article 9
For the purposes of this Directive, ‘vehicle’ means any motor vehicle intended for use on the road, with or without bodywork, having at least four wheels and a maximum design speed exceeding 25 km/h, with the exception of vehicles which run on rails and of agricultural and forestry tractors and all mobile machinery.
Article 10
Any amendments necessary to adjust the requirements of the Annexes to take account of technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
Article 11
1. Member States shall adopt and publish the provisions necessary in order to comply with this Directive before 1 July 1977 and shall forthwith inform the Commission thereof. They shall apply these provisions from 1 October 1977 at the latest.
2. Once this Directive has been notified, the Member States shall also ensure that the Commission is informed, in sufficient time for it to submit its comments, of any draft laws, regulations or administrative provisions which they propose to adopt in the field covered by this Directive.
Article 12
This Directive is addressed to the Member States.
LIST OF ANNEXES
ANNEX I: |
Administrative provisions for type approval |
|
Appendix 1: |
Information document (headlamps) |
|
Appendix 2: |
Information document (light sources) |
|
Appendix 3: |
Type-approval certificate (headlamps) |
|
Appendix 4: |
Type-approval certificate (light sources) |
|
Appendix 5: |
Models of the EC component type-approval mark |
|
ANNEX II: |
Scope and technical requirements for headlamps equipped with filament lamps of categories R2 and/or HS1 |
|
ANNEX III: |
Scope and technical requirements for sealed-beam headlamps |
|
ANNEX IV: |
Scope and technical requirements for headlamps equipped with halogen filament lamps of categories H1, H2, H3, HB3, HB4, H7 and/or H8 |
|
ANNEX V: |
Scope and technical requirements for headlamps equipped with halogen filament lamps of category H4 |
|
ANNEX VI: |
Scope and technical requirements for halogen sealed-beam headlamps |
|
ANNEX VII: |
Scope and technical requirements for filament lamps for use in approved lamp units |
|
ANNEX VIII: |
Scope and technical requirements for headlamps equipped with gas-discharge light sources |
|
ANNEX IX: |
Gas-discharge light sources for use in approved gas-discharge lamp units |
Note:
As used in the Annexes the term ‘driving beam’ is synonymous with ‘main beam’, and the term ‘passing beam’ is synonymous with ‘dipped beam’.
ANNEX I
ADMINISTRATIVE PROVISIONS FOR TYPE APPROVAL
1. This Annex deals with the component type-approval of
1.1. motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both, equipped with filament lamps of categories R2 and/or HS1 and complying with the requirements set out in Annex II;
1.2. motor vehicle ‘sealed-beam’ headlamps emitting an asymmetrical passing beam or a driving beam or both and complying with the requirements set out in Annex III;
1.3. motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both, equipped with halogen filament lamps of categories H1, H2, H3, HB3, HB4, H7 and/or H8 and complying with the requirements set out in Annex IV;
1.4. motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both, equipped with halogen filament lamps of category H4 and complying with the requirements set out in Annex V;
1.5. halogen ‘sealed-beam’ motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and complying with the requirements set out in Annex VI;
1.6. filament lamps for use in approved lamp units of motor vehicles and of their trailers complying with the requirements set out in Annex VII;
1.7. motor vehicle headlamps equipped with gas-discharge light sources and complying with the requirements set out in Annex VIII;
1.8. gas-discharge light sources for use in approved gas-discharge lamp units of motor vehicles complying with the requirements set out in Annex IX.
2. APPLICATION FOR EC COMPONENT TYPE-APPROVAL
2.1. |
The application for EC component type-approval pursuant to Article 3(4) of Directive 70/156/EEC of a type of headlamp shall be submitted by the manufacturer.
|
2.2. |
The application for EC component type-approval pursuant to Article 3(4) of Directive 70/156/EEC of a type of light source shall be submitted by the manufacturer.
|
3. MARKINGS
3.1. |
The devices submitted for EC component type approval must bear:
|
4. GRANTING OF EC COMPONENT TYPE-APPROVAL
4.1. |
If the relevant requirements are satisfied, EC type-approval pursuant to Article 4(3) and, if applicable, Article 4(4) of Directive 70/156/EEC shall be granted. NB: Nothing in this Directive shall prevent a Member State from prohibiting the combination of a headlamp incorporating a lens of plastic material approved under this Directive with a mechanical headlamp-cleaning device (with wipers). |
4.2. |
A model for the EC type-approval certificate is given in 4.2.1. Appendix 3 for applications referred to in point 2.1.; 4.2.2. Appendix 4 for applications referred to in point 2.2. |
4.3. |
An approval number in accordance with Annex VII to Directive 70/156/EEC shall be assigned to each type of headlamp approved. The same Member State shall not assign the same number to another type of headlamp. |
4.4. |
Where EC component type approval is requested for a type of lighting and light-signalling device comprising a headlamp and other lamps, a single EC component type-approval number may be assigned provided that the headlamp complies with the requirements of this Directive and that each of the other lamps forming part of the lighting and light-signalling device for which EC component type approval is requested complies with the separate Directive applying to it. |
4.5. |
An approval code shall be assigned to each type of light source approved. It consists of an identification code comprising not more than two characters selected from the Arabic numerals and capital letters listed in footnote ( 9 ), preceded by a one-digit sequence number assigned to the most recent major technical amendment to the relevant Annex of Directive 76/761/EEC on the date EC type approval was granted. In this Directive the sequence number is — 2 for Annex VII, — 0 for Annex IX. The same Member State shall not assign the same code to another type of light source. |
5. EC COMPONENT TYPE-APPROVAL MARK FOR HEADLAMPS
5.1. |
In addition to the markings referred to in item 3.1., every headlamp conforming to the type approved pursuant to this Directive shall bear an EC component type-approval mark. |
5.2. |
This mark shall consist of:
|
5.3. |
The EC component type-approval mark shall be affixed to the lamp in such a way as to be indelible and clearly legible even when the lamp is fitted to the vehicle. |
5.4. |
Arrangement of the approval mark.
|
6. EC COMPONENT TYPE-APPROVAL MARK FOR LIGHT SOURCES
6.1. |
In addition to the markings referred to in point 3.1.2. or 3.1.3., every light source conforming to the type approved pursuant to this Directive shall bear an EC component type-approval mark. |
6.2. |
This mark shall consist of: 6.2.1. a rectangle surrounding the letter ‘e’ followed by the distinguishing number or letters of the Member State which has granted type-approval: 1 for Germany 2 for France 3 for Italy 4 for the Netherlands 5 for Sweden 6 for Belgium 7 for Hungary 8 for the Czech Republic 9 for Spain 11 for the United Kingdom 12 for Austria 13 for Luxembourg 17 for Finland 18 for Denmark 19 for Romania 20 for Poland 21 for Portugal 23 for Greece 24 for Ireland 26 for Slovenia 27 for Slovakia 29 for Estonia 32 for Latvia 34 for Bulgaria 36 for Lithuania CY for Cyprus MT for Malta; 6.2.2. the approval code mentioned in item 4.5. in the vicinity of the rectangle. |
6.3. |
The inscriptions and marks specified in points 3.1.2., 3.1.3. and 6.1. shall be clearly legible and indelible. |
6.4. |
An example of an EC component type-approval mark for light source is given in figure 4 of Appendix 5. |
7. MODIFICATIONS OF THE TYPE AND AMENDMENTS TO APPROVALS
7.1. In the case of modifications of the type approved pursuant to this Directive, the provisions of Article 5 of Directive 70/156/EEC shall apply.
8. CONFORMITY OF PRODUCTION
8.1. As a general rule, measures to ensure the conformity of production shall be taken in accordance with the provisions laid down in Article 10 of Directive 70/156/EEC.
8.2. In particular, the tests to be carried out pursuant to point 2.3.5. of Annex X to Directive 70/156/EEC are those prescribed in
— Annex 3 and Annex 7 paragraph 3 of the documents referred to in point 2.1 of Annex II,
— Annex 3 and Annex 6 paragraph 3 of the documents referred to in point 2.1. of Annex III,
— Annex 2 and Annex 6 paragraph 3 of the documents referred to in point 2.1. of Annex IV,
— Annex 5 and Annex 6 paragraph 3 of the documents referred to in point 2.1. of Annex V,
— Annex 5 and Annex 7 paragraph 3 of the documents referred to in point 2.1. of Annex VI,
— Annexes 6 and 7 of the documents referred to in point 2.1. of Annex VII,
— Annex 8 of the documents referred to in point 2.1. of Annex VIII, or
— Annexes 6 and 7 of the documents referred to in point 2.1. of Annex IX, as applicable,
and the criteria to be used in selecting samples for the tests mentioned in points 2.4.2. and 2.4.3. of Annex X to Directive 70/156/EEC are those set out in
— Annex 8 of the documents referred to in point 2.1. of Annex II,
— Annex 7 of the documents referred to in point 2.1. of Annex III,
— Annex 7 of the documents referred to in point 2.1. of Annex IV,
— Annex 7 of the documents referred to in point 2.1. of Annex V,
— Annex 8 of the documents referred to in point 2.1. of Annex VI,
— Annexes 8 and 9 of the documents referred to in point 2.1. of Annex VII,
— Annex 9 of the documents referred to in point 2.1. of Annex VIII, or
— Annex 8 of the documents referred to in point 2.1. of Annex IX, as applicable.
8.3. The normal frequency of inspections authorised by the approval authority shall be one every two years.
Appendix 1
Appendix 2
Appendix 3
Appendix 4
Appendix 5
EXAMPLES OF THE EC COMPONENT TYPE-APPROVAL MARK
Figure 1
Independent lamps
Example 1
The device bearing the EC component type-approval mark shown above is a headlamp meeting the requirements of Annex II (sequence No 01) with respect to the passing beam and designed for left-hand traffic only, type approved in Germany (e1) under the base approval number 1471.
Example 2
The device bearing the EC component type-approval mark shown above is a headlamp meeting the requirements of Annex II (sequence No 01) with respect to both the passing beam and the driving beam and designed for both traffic systems by means of adjustment of the optical unit or of the lamp, type approved in Germany (e1) under the base approval number 1471.
Example 3
The device bearing the EC component type-approval mark shown above is a sealed-beam headlamp meeting the requirements of Annex III (sequence No 02) with respect to both the passing beam and the driving beam and designed for right-hand traffic only, type approved in Germany (e1) under the base approval number 1471.
Example 4
The device bearing the EC component type-approval mark shown above is a headlamp incorporating a lens of plastic material, meeting the requirements of Annex IV (sequence No 04) with respect to the driving beam and designed for right-hand traffic only, type approved in Germany (e1) under the base approval number 1471. The number 30 indicates that the maximum luminous intensity of the driving beam is between 86 250 and 101 250 candelas.
Example 5
The device bearing the EC component type-approval mark shown above is a headlamp meeting the requirements of Annex V (sequence No 02) with respect to both the passing beam and the driving beam and designed for left-hand traffic only, type approved in Germany (e1) under the base approval number 1471. The passing lamp filament shall not be lit simultaneously with the driving lamp filament or any other headlamp with which it is reciprocally incorporated. For the meaning of the number 30, see example 4.
Example 6
The device bearing the EC component type-approval mark shown above is a halogen sealed-beam headlamp incorporating a lens of plastic material, meeting the requirements of Annex VI (sequence No 02) with respect to the driving beam and designed for right-hand traffic only, type approved in Germany (e1) under the base approval number 1471. For the meaning of the number 30, see example 4.
Example 7
The device bearing the EC component type-approval mark shown above is headlamp incorporating a lens of plastic material, meeting the requirements of Annex VIII (sequence No 00) with respect to the passing beam and designed for both traffic systems, type approved in Germany (e1) under the base approval number 1471, which is combined or grouped or reciprocally incorporated with a driving beam meeting the requirements of Annex IV (sequence No 04). The passing beam shall not be lit simultaneously with the driving beam. For the meaning of the number 30, see example 4.
Figure 2
Simplified marking of grouped, combined or reciprocally incorporated lamps when two or more lamps are part of the same assembly
(The vertical and horizontal lines schematise the shape of the light-signalling device. These are not part of the approval mark)
MODEL A
MODEL B
MODEL C
MODEL D
Note:
The four examples of approval marks, models A, B, C and D represent four possible variants of the marking of a lighting and light-signalling device when two or more lamps are part of the same unit of grouped, combined or reciprocally incorporated lamps. These approval marks show that the device was approved in Germany (e1) under the base approval number 7120 and comprises:
a front position lamp (A) approved in accordance with Annex II to Directive 76/758/EEC, sequence No 02, for left-hand installation;
a headlamp (HCR) with a passing beam designed for right-hand and left-hand traffic and driving beam with a maximum intensity comprised between 86 250 and 101 250 candelas (as indicated by the number 30) approved in accordance with Annex V to Directive 76/761/EEC, sequence No 02, and incorporating a lens of plastic material (PL);
a front fog lamp (B) approved in accordance with Directive 76/762/EEC, sequence No 02, and incorporating a lens of plastic material (PL);
a front direction indicator lamp of category 1a approved in accordance with Directive 76/759/EEC, sequence No 01.
Figure 3
Lamp reciprocally incorporated or grouped with a headlamp
Example 1
The above example corresponds to the marking of a lens intended to be used in different types of headlamps, namely:
either:
a headlamp with a passing beam designed for both traffic systems and a driving beam with a maximum luminous intensity comprised between 52 500 and 67 500 candelas (as indicated by the number 20) approved in Germany (e1) under the base approval number 7120 in accordance with the requirements of Annex IV to Directive 76/761/EEC, sequence No 04, which is reciprocally incorporated with a front position lamp approved in accordance with Annex II to Directive 76/758/EEC, sequence No 02,
or:
a headlamp with a gas discharge passing beam and a driving beam with a maximum luminous intensity comprised between 86 250 and 101 250 candelas (as indicated by the number 30), designed for both traffic systems and approved in Germany (e1) under the base approval number 7122 in accordance with the requirements of Annex VIII to Directive 76/761/EEC, sequence No 00, which is reciprocally incorporated with the same front position lamp as above,
or:
even either of the abovementioned headlamps approved as a single lamp.
The main body of the headlamp shall bear the only valid approval number, for instance:
or
or
or
Example 2
The above example corresponds to the marking of a lens of plastic material and used in an assembly of two headlamps approved in Germany (e1) under the base approval number 1151, consisting of:
— a headlamp emitting a halogen passing beam designed for both traffic systems and a halogen driving beam with a maximum luminous intensity between x and y candelas, meeting the requirements of Annex IV to Directive 76/761/EEC, sequence No 04, and
— a headlamp emitting a gas discharge driving beam with a maximum luminous intensity comprised between w and z candelas, meeting the requirements of Annex VIII to Directive 76/761/EEC, sequence No 00, the maximum luminous intensities of the driving beam contributors as a whole being comprised between 86 250 and 101 250 candelas as shown by the number 30.
Figure 4
Light sources
The above approval mark affixed to a light source indicates that this light source has been approved in Germany (e1) under the approval code 2A1. Its first character indicates that the light source meets the requirements of Annex VII with respect to filament lamps.
ANNEX II
SCOPE AND TECHNICAL REQUIREMENTS
1. SCOPE
This Annex applies to motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps of categories R2 and/or HS1.
2. TECHNICAL REQUIREMENTS
2.1. |
The technical requirements are those set out in paragraphs 1 and 5 to 8 and Annexes 3, 4 and 6 to 8 of UN-ECE Regulation No 1 which consists of a consolidation of the following documents: — the 01 series of amendments including Supplements 1 to 3 to the 01 series of amendments ( 10 ), — Supplement 4 to the 01 series of amendments ( 11 ), — Supplement 5 to the 01 series of amendments including Corrections to Supplement 3 to the 01 series of amendments and Corrections to Revision 4 of Regulation No 1 ( 12 ), — Supplement 6 to the 01 series of amendments ( 13 ), — Supplement 7 to the 01 series of amendments ( 14 ), except that: 2.1.1. Where reference is made to ‘Regulation No 37’, this shall be understood as ‘Annex VII to this Directive’. 2.1.2. In paragraph 6.5., ‘paragraph 2.1.’ means ‘point 1.4.2.3. in Appendix 1 of Annex I to this Directive’. 2.1.3. In Annex 3, paragraph 2.5., ‘paragraph 9.1. of this Regulation’ means ‘point 2.1. of Annex X to Directive 70/156/EEC’. 2.1.4. In Annex 7, paragraph 1.1. and Appendix 1, the title of Table A, ‘paragraph 2.2.4. of this Regulation’ means ‘point 2.1.2.2. of Annex I to this Directive’. 2.1.5. In Annex 7, paragraph 1.2. and Appendix 1, the title of Table B, ‘paragraph 2.2.3. of this Regulation’ means ‘point 2.1.2.1. of Annex I to this Directive’. 2.1.6. In Annex 7, paragraph 2.4.2., ‘paragraph 2.2.4. above’ means ‘point 2.1.2.2.2. of Annex I to this Directive’. 2.1.7. In Annex 8, paragraphs 2.3. and 3.3., ‘paragraph 10’ means ‘Article 11 of Directive 70/156/EEC’. 2.1.8. Only headlamps emitting a light of white colour shall be approved pursuant to this Directive. |
ANNEX III
SCOPE AND TECHNICAL REQUIREMENTS
1. SCOPE
This Annex applies to motor vehicle ‘sealed-beam’ headlamps emitting an asymmetrical passing beam or a driving beam or both.
2. TECHNICAL REQUIREMENTS
2.1. |
The technical requirements are those set out in paragraphs 2, 6 to 8 and 11 and Annexes 3, 4 (pages 32 to 39 of reference document ( 15 )) and 5 to 7 of UN-ECE Regulation No 5 which consists of a consolidation of the following documents: — the 01 and 02 series of amendments including Supplements 1 and 2 to the 02 series of amendments ( 16 ), — Corrigendum 1 to Revision 3 of Regulation No 5 ( 17 ), — Supplement 3 to the 02 series of amendments ( 18 ), — Supplement 4 to the 02 series of amendments ( 19 ), except that: 2.1.1. In Annex 3, paragraph 2.5., ‘paragraph 12.1 of this Regulation’ means ‘point 2.1. of Annex X to Directive 70/156/EEC’. 2.1.2. In Annex 6, paragraph 1.1. and Appendix 1, the title of Table A, ‘paragraph 3.2.4. of this Regulation’ means ‘point 2.1.2.2. of Annex I to this Directive’. 2.1.3. In Annex 6, paragraph 1.2. and Appendix 1, the title of Table B, ‘paragraph 3.2.3. of this Regulation’ means ‘point 2.1.2.1. of Annex I to this Directive’. 2.1.4. In Annex 6, paragraph 2.4.2., ‘paragraph 2.2.4. above’ means ‘point 2.1.2.2.2. of Annex I to this Directive’. 2.1.5. In Annex 7, paragraphs 2.3 and 3.3., ‘paragraph 13’ means ‘Article 11 of Directive 70/156/EEC’. 2.1.6. Only headlamps emitting a light of white colour shall be approved pursuant to this Directive. |
ANNEX IV
SCOPE AND TECHNICAL REQUIREMENTS
1. SCOPE
This Annex applies to motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps of categories H1, H2, H3, HB3, HB4, H7 and/or H8.
2. TECHNICAL REQUIREMENTS
2.1. |
The technical requirements are those set out in paragraphs 1, 5, 6, 8 and 9 and Annexes 2, and 4 to 7 of UN-ECE Regulation No 8 which consist of a consolidation of the following documents: — the 01 to 04 series of amendments including Supplements 1 to 4 to the 04 series of amendments ( 20 ), — Supplement 5 to the 04 series of amendments ( 21 ), — Corrigendum 1 to Supplement 4 to the 04 series of amendments ( 22 ), — Corrigendum 2 to Revision 3 of Regulation No 8 ( 23 ), — Supplement 6 to the 04 series of amendments ( 24 ), — Supplement 7 to the 04 series of amendments ( 25 ), — Supplement 8 to the 04 series of amendments ( 26 ), — Supplement 9 to the 04 series of amendments ( 27 ), — Supplement 10 to the 04 series of amendments ( 28 ), except that: 2.1.1. Where reference is made to ‘Regulation No 37’, this shall be understood as ‘Annex VII to this Directive’. 2.1.2. In paragraph 6.3.2.1.2., ‘paragraph 4.2.2.7.’ means ‘item 5.2.3.8 of Annex I to this Directive’. 2.1.3. In paragraph 6.4., ‘paragraph 2.1.3.’ means ‘item 1.4.2.3. in Appendix 1 of Annex I to this Directive’. 2.1.4. In Annex 2, paragraph 2.5., ‘paragraph 12.1. of this Regulation’ means ‘item 2.1. of Annex X to Directive 70/156/EEC’. 2.1.5. In Annex 6, paragraph 1.1. and Appendix 1, the title of Table A, ‘paragraph 2.2.4. of this Regulation’ means ‘point 2.1.2.2. of Annex I to this Directive’. 2.1.6. In Annex 6, paragraph 1.2. and Appendix 1, the title of Table B, ‘paragraph 2.2.3. of this Regulation’ means ‘point 2.1.2.1. of Annex I to this Directive’. 2.1.7. In Annex 6, paragraph 2.4.2., ‘paragraph 2.2.4. above’ means ‘point 2.1.2.2.2. of Annex I to this Directive’. 2.1.8. In Annex 7, paragraphs 2.3 and 3.3, ‘paragraph 13’ means ‘Article 11 of Directive 70/156/EEC’. 2.1.9. Only headlamps emitting a light of white colour shall be approved pursuant to this Directive. |
ANNEX V
SCOPE AND TECHNICAL REQUIREMENTS
1. SCOPE
This Annex applies to motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps of category H4.
2. TECHNICAL REQUIREMENTS
2.1. |
The technical requirements are those set out in paragraphs 1, 5, 6, 8 and 9 and Annexes 3 to 7 of UN-ECE Regulation No 20 which consists of a consolidation of the following documents: — the 01 and 02 series of amendments including Supplements 1 to 3 to the 02 series of amendments ( 29 ), — Supplement 4 to the 02 series of amendments ( 30 ), — Supplement 5 to the 02 series of amendments including Corrections to Supplement 3 to the 02 series of amendments and Corrections to Revision 2 of Regulation No 20 ( 31 ), — Supplement 4 to the 02 series of amendments ( 32 ), except that: 2.1.1. Where reference is made to ‘Regulation No 37’, this shall be understood as ‘Annex VII to this Directive’. 2.1.2. In paragraph 6.3.2.1.2., ‘paragraph 4.2.2.7.’ means ‘point 5.2.3.8. of Annex I to this Directive’. 2.1.3. In paragraph 6.4., ‘paragraph 2.1.3.’ means ‘point 1.4.2.3. in Appendix 1 of Annex I to this Directive’. 2.1.4. In Annex 5, paragraph 2.5., ‘paragraph 12.1. of this Regulation’ means ‘point 2.1. of Annex X to Directive 70/156/EEC’. 2.1.5. In Annex 6, paragraph 1.1. and Appendix 1, the title of Table A, ‘paragraph 2.2.4. of this Regulation’ means ‘point 2.1.2.2. of Annex I to this Directive’. 2.1.6. In Annex 6, paragraph 1.2. and Appendix 1, the title of Table B, ‘paragraph 2.2.3. of this Regulation’ means ‘point 2.1.2.1. of Annex I to this Directive’. 2.1.7. In Annex 6, paragraph 2.4.2., ‘paragraph 2.2.4.1.1. of this Regulation’ means ‘point 2.1.2.2.2. of Annex I to this Directive’. 2.1.8. In Annex 7, paragraphs 2.3. and 3.3., ‘paragraph 13’ means ‘Article 11 of Directive 70/156/EEC’. 2.1.9. Only headlamps emitting a light of white colour shall be approved pursuant to this Directive. |
ANNEX VI
SCOPE AND TECHNICAL REQUIREMENTS
1. SCOPE
This Annex applies to halogen ‘sealed-beam’ motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both.
2. TECHNICAL REQUIREMENTS
2.1. |
The technical requirements are those set out in paragraphs 2, 6 to 8 and 10 and Annexes 3 to 8 of UN-ECE Regulation No 31 which consists of a consolidation of the following documents: — the 1 and 02 series of amendments including Supplements 1 and 2 to the 02 series of amendments ( 33 ), — Corrigendum 1 to Revision 1 of Regulation No 31 ( 34 ), — Supplement 3 to the 02 series of amendments ( 35 ), — Supplement 3 to the 02 series of amendments ( 36 ), except that: 2.1.1. In paragraph 8.3.2.1.2., ‘paragraph 5.2.2.5.’ means ‘point 5.2.3.8. of Annex I to this Directive’. 2.1.2. In Annex 5, paragraph 2.5., ‘paragraph 11.1. of this Regulation’ means ‘point 2.1. of Annex X to Directive 70/156/EEC’. 2.1.3. In Annex 7, paragraph 1.1. and Appendix 1, the title of Table A, ‘paragraph 3.2.4. of this Regulation’ means point 2.1.2.2. of Annex I to this Directive. 2.1.4. In Annex 7, paragraph 1.2 and Appendix 1, the title of Table B, ‘paragraph 3.2.3. of this Regulation’ means ‘point 2.1.2.1. of Annex I to this Directive’. 2.1.5. In Annex 7, paragraph 2.4.2, ‘paragraph 3.2.4.1.1. of this Regulation’ means ‘point 2.1.2.2.2. of Annex I to this Directive’. 2.1.6. In Annex 8, paragraphs 2.3. and 3.3., ‘paragraph 12’ means ‘Article 11 of Directive 70/156/EEC’. 2.1.7. Only headlamps emitting a light of white colour shall be approved pursuant to this Directive. |
ANNEX VII
SCOPE AND TECHNICAL REQUIREMENTS
1. SCOPE
This Annex applies to filament lamps for use in approved lamp units of motor vehicles and of their trailers.
2. TECHNICAL REQUIREMENTS
2.1. |
The technical requirements are those set out in paragraphs 2.1. and 3. and Annexes 1 and 4 to 9 of UN-ECE Regulation No 37 which consists of a consolidation of the following documents: — the 02 and 03 series of amendments including Corrigendum 2 and Supplements 1 to 9 to the 03 series of amendments ( 37 ), — Corrigendum 1 to Revision 2 ( 38 ), — Supplement 10 to 12 to the 03 series of amendments ( 39 ), — Supplement 13 to the 03 series of amendments ( 40 ), — Supplement 14 to the 03 series of amendments ( 41 ), — Supplement 15 to the 03 series of amendments ( 42 ), except that: 2.1.1. In Annex 6, paragraph 2.5., ‘paragraph 4.1. of this Regulation’ means ‘item 2.1. of Annex X to Directive 70/156/EEC’. |
ANNEX VIII
SCOPE AND TECHNICAL REQUIREMENTS
1. SCOPE
This Annex applies to motor vehicle headlamps equipped with gas-discharge light sources.
2. TECHNICAL REQUIREMENTS
2.1. |
The technical requirements are those set out in paragraphs 1, 5, 6 and 7 and Annexes 3 to 9 of UN-ECE Regulation No 98, 38 which consists of a consolidation of the following documents: — the Regulation in its original form (00) ( 43 ), — Supplement 1 to Regulation No 98 ( 44 ), except that: 2.1.1. Where reference is made to ‘Regulation No 99’, this shall be understood as ‘Annex IX to this Directive’. 2.1.2. In paragraph 1.5., ‘Regulation No 48’ shall be understood as ‘Directive 76/756/EEC’. 2.1.3. In paragraph 6.3.2.2., ‘paragraph 4.2.2.7.’ means ‘point 5.2.3.8 of Annex I to this Directive’. 2.1.4. In paragraph 6.5., ‘paragraph 2.1.4.’ means ‘point 1.4.2.3. in Appendix 1 of Annex I to this Directive’. 2.1.5. In Annex 5, paragraph 1.1. and Appendix 1, the title of Table A, ‘paragraph 2.2.4. of this Regulation’ means ‘point 2.1.2.2. of Annex I to this Directive’. 2.1.6. In Annex 5, paragraph 1.2. and Appendix 1, the title of Table B, ‘paragraph 2.2.3. of this Regulation’ means ‘point 2.1.2.1. of Annex I to this Directive’. 2.1.7. In Annex 5, paragraph 2.4.2., ‘paragraph 2.2.4. above’ means ‘point 2.1.2.2.2. of Annex I to this Directive’. 2.1.8. In Annex 8, paragraph 2.5., ‘paragraph 9.1. of this Regulation’ means ‘point 2.1. of Annex X to Directive 70/156/EEC’. 2.1.9. In Annex 9, paragraphs 2.3. and 3.3., ‘paragraph 10’, means ‘Article 11 of Directive 70/156/EEC’. 2.1.10. Only headlamps emitting a light of white colour shall be approved pursuant to this Directive. |
ANNEX IX
SCOPE AND TECHNICAL REQUIREMENTS
1. SCOPE
This Annex applies to gas-discharge light sources for use in approved gas-discharge lamp units of motor vehicles.
2. TECHNICAL REQUIREMENTS
2.1. |
The Technical requirements are those set out in paragraphs 2.1. and 3. and Annexes 1 and 4 to 8 of UN-ECE Regulation No 99 which consists of a consolidation of the following documents: — the Regulation in its original form (00) ( 45 ), — Supplement 1 to Regulation No 99 ( 46 ), except that: 2.1.1. In paragraphs 3.2.1. and 3.4.2. and in Annex 4, paragraph 2, ‘paragraph 2.2.2.4’ means ‘point 2.2.2.2. of Annex I to this Directive’. 2.1.2. In Annex 6, paragraph 2.5., ‘paragraph 4.1. of this Regulation’ means ‘point 2.1. of Annex X to Directive 70/156/EEC’. |
( 1 ) OJ No C 76, 7. 4. 1975, p. 37.
( 2 ) OJ No C 255, 7. 11. 1975, p. 2.
( 3 ) OJ No L 42, 23. 2. 1970, p. 1.
( 4 ) See page 1 of this Official Journal.
(
5)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
6)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
( 7 ) In the case of headlamps designed to meet the requirements of traffic moving on one side of the road only (either right or left) it is further recommended that the area which can be occulted to prevent discomfort to users in a country where traffic moves on the side of the road opposite to that of the country for which the headlamp was designed should be outlined indelibly on the front lens and explained in the maintenance book of the vehicles. This marking is not necessary, however where the area is clearly apparent from the design.
( 8 ) If the lens cannot be separated from the main body of the headlamp, the provision of a marking area on the lens will suffice.
( 9 ) 0 1 2 3 4 5 6 7 8 9
A B C D E F G H J K L M N P R S T U V W X Y Z.
(
10)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
11)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
12)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
( 13 ) TRANS/WP.29/489.
( 14 ) TRANS/WP.29/535.
(
15)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
16)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
17)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
( 18 ) TRANS/WP. 29/491.
( 19 ) TRANS/WP. 29/567.
(
20)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
21)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
22)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
23)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
( 24 ) TRANS/WP. 29/492.
( 25 ) TRANS/WP. 29/520.
( 26 ) TRANS/WP.29/538.
( 27 ) TRANS/WP.29/585.
( 28 ) TRANS/WP.29/623.
(
29)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
30)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
31)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
( 32 ) TRANS/WP. 29/541.
(
33)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
34)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
( 35 ) TRANS/WP.29/497.
( 36 ) TRANS/WP.29/569.
(
37)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
38)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
(
39)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
( 40 ) TRANS/WP.29/498.
( 41 ) TRANS/WP.29/523.
( 42 ) TRANS/WP.29/586.
(
43)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
( 44 ) TRANS/WP.29/553.
(
45)
E/ECE/324 |
|
||
E/ECE/TRANS/505 |
( 46 ) TRANS/WP.29/587.