52023PC0255

EUROPEAN COMMISSION

Brussels, 16.5.2023

COM(2023) 255 final

2023/0151(NLE)

Proposal for a

COUNCIL REGULATION

amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products

EXPLANATORY MEMORANDUM

1.CONTEXT OF THE PROPOSAL

•Reasons for and objectives of the proposal

In order to ensure sufficient and uninterrupted supplies of certain agricultural and industrial products which are insufficiently produced or not produced at all in the Union and to avoid any disturbances on the market for these products, some Common Customs Tariff duties have been partially or totally suspended, without any limits as regards their quantity, by Council Regulation (EU) No 2021/2278 (hereinafter "the Regulation") 1 .

The Regulation is updated every six months to accommodate the needs of Union industry.

The Commission, assisted by the Economic Tariff Questions Group (ETQG), has reviewed all requests from the Member States for autonomous tariff suspensions.

Following this review, the Commission considers that the suspension of duties is justified for some new products, currently not listed in the Annex of the Regulation. In relation to some other products, it is necessary to modify the conditions in terms of product description and classification. Products for which a tariff suspension is no longer in the Union's economic interest are proposed to be withdrawn.

•Consistency with existing policy provisions in the policy area

This proposal does not affect countries that have a preferential trading agreement with the Union nor candidate countries or potential candidates for preferential agreements with the Union (e.g. Generalised System of Preferences; the African, Caribbean and Pacific group trade regime; Free Trade Agreements).

•Consistency with other Union policies

The proposal is in line with Union policies in the area of agriculture, trade, enterprise, environment, development and external relations.

2.LEGAL BASIS, SUBSIDIARITY AND PROPORTIONALITY

•Legal basis

The legal basis of this proposal is Article 31 of the Treaty on the Functioning of the European Union (TFEU).

•Subsidiarity (for non-exclusive competence)

The proposal falls under the exclusive competence of the Union. The subsidiarity principle therefore does not apply.

•Proportionality

The proposal complies with the principle of proportionality. The measures envisaged are in line with the principles for simplifying procedures for operators engaged in foreign trade, as stated in the Commission communication concerning autonomous tariff suspensions and quotas 2 . This Regulation does not go beyond what is necessary to achieve the objectives pursued in accordance with Article 5(4) of the Treaty on European Union (TEU).

•Choice of the instrument

By virtue of Article 31 of the TFEU, "Common Customs Tariff duties shall be fixed by the Council on a proposal from the Commission". Therefore, a Council regulation is the appropriate instrument.

3.RESULTS OF EX-POST EVALUATIONS, STAKEHOLDER CONSULTATIONS AND IMPACT ASSESSMENTS

•Ex-post evaluations/fitness checks of existing legislation

The autonomous suspensions scheme was subject to an evaluation study carried out in 2013 3 . The evaluation concluded that the core rationale for the scheme remains valid. The cost savings for EU businesses importing goods under the scheme can be significant. In turn, depending on the product, company and sector, these savings can have wider benefits, such as boosting competitiveness, making production methods more efficient, and creating or keeping jobs in the Union. Details of the savings stemming from this regulation can be found in the attached legislative financial statement.

•Stakeholder consultations

The (ETQG), which consists of representatives from all Member States plus Türkiye, assisted the Commission in the preparation of this proposal

The ETQG carefully examined each request to ensure that it would not cause any harm to Union enterprises and would strengthen and consolidate the competitiveness of Union's production. The members of the ETQG carried out the assessment through discussions, and Member States, in turn, consulted the concerned industries, associations, chambers of commerce and other stakeholders involved.

All listed suspensions correspond to agreements or compromises reached in the discussions of the ETQG. No potential serious risk with irreversible consequences was identified.

•Impact assessment

The proposed amendment is of a purely technical nature and concerns only the coverage of the suspensions currently listed in the Annex to Council Regulation (EU) No 2021/2278. An impact assessment was not carried out because the proposed changes in the list of products that would benefit from the autonomous suspension of Common Customs Tariff duties are not expected to have significant impacts.

•Fundamental rights

The proposal has no consequences on fundamental rights.

4.BUDGETARY IMPLICATIONS

This proposal has no financial impact on expenditure, but has a financial impact on revenue. Uncollected customs duties corresponding to the suspension will amount approximately EUR 18 720 015 per year. The negative effect on the budget’s traditional own resources is EUR 14 040 011 per year (i.e. 75 % of the total). The legislative financial statement sets out the budgetary implications of the proposal in greater detail.

The loss of revenue in traditional own resources shall be compensated by Member States Gross National Income (GNI) based on resource contributions.

5.OTHER ELEMENTS

•Implementation plans and monitoring, evaluation and reporting arrangements

The proposed measures are managed within the framework of the Integrated Tariff of the European Union (TARIC) and applied by customs administrations of the Member States.

2023/0151 (NLE)

Proposal for a

COUNCIL REGULATION

amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances on the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council 4 (‘CCT duties’) on those products have been suspended by Council Regulation (EU) 2021/2278 5 . As a result, the products listed in the Annex to Regulation (EU) 2021/2278 can be imported into the Union at reduced or zero duty rates without any limitation as regards their quantity.

(2)The Union production of certain products that are not listed in the Annex to Regulation (EU) 2021/2278 is inadequate to meet the specific requirements of the user industries in the Union. As it is in the Union's interest to ensure an adequate supply of certain products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to grant a complete suspension of the CCT duties also on those products.

(3)With a view to promoting integrated battery production in the Union, a partial suspension of the CCT duties should be granted in respect of certain products related to battery production that are currently not listed in the Annex to Regulation (EU) 2021/2278, taking into consideration that the respective Union production of those products is inadequate to meet the specific requirements of the user industries in the Union. The date for the mandatory review of those suspensions should be 31 December 2023, in order for that review to take into account the short-term evolution of the battery production sector in the Union.

(4)It is necessary to amend the product description and classification for certain CCT duty suspensions listed in the Annex to Regulation (EU) 2021/2278 in order to take into account technical product developments and economic trends in the market.

(5)It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) 2021/2278. The suspensions for those products should therefore be deleted from that Annex.

(6)Regulation (EU) 2021/2278 should therefore be amended accordingly.

(7)In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the Communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas 6 , the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 July 2023. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) 2021/2278 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2023.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels,

For the Council

The President

LEGISLATIVE FINANCIAL STATEMENT

1.NAME OF THE PROPOSAL:

Proposal for amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2) point (c) of Regulation (EU) No 952/2013 on certain agricultural and industrial products

2.BUDGET LINES:

Chapter and Article: Chapter 12, Article 120

Amount budgeted for the year 2023: 21 590 300 000

3.FINANCIAL IMPACT

◻ Proposal has no financial implications

X Proposal has no financial impact on expenditure but has a financial impact on revenue - the effect is as follows:

(EUR million to one decimal place)

Budget line

Revenue

6 month period, starting dd/mm/yyyy

[Year: second half of 2023]

Article 120

Impact on own resources

01/07/2023

-7

Situation following action
	[2023 – 2027]
Article 120	- 14 EUR million/ year

The Annex contains 57 new products. The uncollected duties corresponding to these suspensions, calculated on the basis of requesting Member State projections for the period 2023 to 2027, amount to EUR 10 559 627 per year.

On the basis of the existing statistics for preceding years, it would appear, however, necessary to increase this amount by an average factor, estimated at 1,8 to take account of imports into other Member States using the same suspensions. This means uncollected duties of some EUR 19 007 329 per year.

23 products have been withdrawn from this Annex reflecting the reintroduction of customs duties. This represents an increase of EUR 287 314 per year in the collection of duties, as estimated on the basis of 2022 statistics.

On the basis of the above, the impact on the loss of revenue for the EU budget resulting from this Regulation is estimated at 19 007 329 – 287 314 = EUR 18 720 015 (gross amount, including collection costs) x 0,75 = EUR 14 040 011 per year.

4.ANTI-FRAUD MEASURES

Checks on the end-use of some of the products covered by this Council Regulation will be carried out in accordance with Article 254 of Regulation (EU) No 952/2013.

In addition, Member States may carry out any customs controls they deem appropriate under the risk management they undertake, as provided for by Article 46 of Regulation (EU) No 952/2013.

(1) OJ L 466, 29.12.2021, p.1

(2) OJ C 363, 13.12.2011, p. 6.

(3) https://taxation-customs.ec.europa.eu/system/files/2016-09/evaluation_suspensions_duties.pdf

(4) Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).

(5) Council Regulation (EU) 2021/2278 of 20 December 2021 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products, and repealing Regulation (EU) No 1387/2013 (OJ L 466, 29.12.2021, p.1).

(6) OJ C 363, 13.12.2011, p. 6.

Top

EUROPEAN COMMISSION

Brussels, 16.5.2023

COM(2023) 255 final

ANNEX

to the

Proposal for a COUNCIL REGULATION

amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products

ANNEX

The Annex is amended as follows:

(1)the entries with the following serial numbers are deleted: 0.2425, 0.3140, 0.3966, 0.4030, 0.4140, 0.4305, 0.4609, 0.4733, 0.4893, 0.5018, 0.5187, 0.5788, 0.6629, 0.6654, 0.6689, 0.6781, 0.7489, 0.7972, 0.8111, 0.8112, 0.8140, 0.8311;

(2)the following entries replace those entries that have the same serial numbers:

Serial Number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

‘0.3227

2846 90 30

2846 90 40

2846 90 50

2846 90 60

2846 90 70

2846 90 90

Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 00

0 %

31.12.2023

0.7389

ex 2914 29 00

1-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity by weight of more than 90 %

0 %

31.12.2024

0.7722

ex 2919 90 00

Reaction products of phosphoryl trichloride and 2-methyloxirane (CAS RN 1244733-77-4)

0 %

31.12.2024

0.4058

ex 3204 20 00

Colourant C.I. Fluorescent Brightener 184 (CAS RN 7128-64-5) and preparations based thereon with a colourant C.I. Fluorescent Brightener 184 content of 20 % or more by weight

0 %

31.12.2026

0.4922

ex 3601 00 00

Pyrotechnical mixture in cylindrical shape or granulate form, composed of strontium nitrate or copper nitrate or basic copper nitrate in a matrix of nitroguanidine or guanidine nitrate, also containing a binder and additives, used as a component of airbag inflators

(1)

0 %

31.12.2026

0.4410

ex 3903 90 90

Mixture containing by weight:

—	45 % or more but not more than 65 % of polymers of styrene,
—	30 % or more but not more than 45 % of poly(phenylene ether), and
—	not more than 11 % of additives

0 %

31.12.2023

0.6351

ex 3907 29 20

Poly(p-phenylene oxide) in the form of powder with:

—	a glass-transition temperature of 210 °C or more,
—	a weight average molecular weight (Mw) of 35 000 or more but not more than 80 000,
—	an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram

0 %

31.12.2024

0.5506

ex 3920 51 00

Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 125 μm

0 %

31.12.2023

0.8438

ex 3920 62 19

Non-transparent film of poly(ethylene terephthalate) or poly(vinyl difluoride):

—	each outer layer with a thickness of 7 µm or more but not more than 80 µm,
—	with a tensile strength of 300 N/cm2 or more (ASTM D-882),
—	with a total thickness of 200 µm or more but not more than 350 µm, and
—	with a width of 600 mm or more but not more than 1 600 mm,
—	covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites

0 %

31.12.2027

0.7056

ex 7019 61 00

ex 7019 63 00

E-fibre glass fabrics:

—	having a weight of 20 g/m2 or more, but not more than 214 g/m2,
—	surface treated with an organosilane coupling agent,
—	in rolls,
—	having a humidity content by weight of 0,13 % or less, and
—	having not more than 3 hollow fibres out of 100 000 fibres,

for the exclusive use in the manufacture of prepregs and copper clad laminates

(1)

0 %

m²

31.12.2026

0.8300

ex 8408 90 65

ex 8408 90 67

ex 8408 90 81

Compression-ignition internal combustion piston engines:

—	of the inline type,
—	with a cylinder capacity of 7 000 cm3 or more but not more than 18 100 cm3,
—	with a power of 205 kW or more but not more than 597 kW,
—	with an exhaust after-treatment module,
—	with external width/height/depth dimensions of not more than 1 310/
—	1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm,

for use in the manufacture of crushing, screening, separation or compost turning machines

(1)

0 %

31.12.2026

0.6627

ex 8501 10 99

Permanently excited DC motor with

—	a multiple-phase winding,
—	an external diameter of 24 mm or more but not more than 38 mm,
—	a rated speed of not more than 12 000 rpm,
—	a power supply voltage of 8 V or more but not more than 27 V,
—	with or without a pulley,
—	with or without a gear wheel

0 %

31.12.2025

0.2838

ex 8501 10 99

DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°C to + 70°C

0 %

31.12.2023

0.7789

ex 8505 19 10

Arc segments of permanent magnets of agglomerated ferrite, with:

—	a length of 16,8 mm or more, but not more than 110,2 mm,
—	a width of 14,8 mm or more, but not more than 75,2 mm,
—	a thickness of 4,8 mm or more, but not more than 13,2 mm,

for use in the manufacture of electromotor rotors

(1)

0 %

31.12.2024

0.6703

ex 8507 60 00

Lithium-ion accumulator, with:

—	a length of 150 mm or more, but not more than 1 310 mm,
—	a width of 100 mm or more, but not more than 1 000 mm,
—	a height of 200 mm or more, but not more than 1 500 mm,
—	a weight of 75 kg or more, but not more than 200 kg,
—	a nominal capacity not less than 58 Ah and not more than 500 Ah,
—	a nominal output voltage of 230V AC (line to neutral) or a nominal voltage of 50V (± 10 %)

1.3 %

31.12.2023

0.7796

ex 8536 49 00

Relay in the shape of a cube with:

—	a coil operating voltage of 12 VDC (Voltage Direct Current) or more, but not more than 24 VDC (Voltage Direct Current),
—	a contact current carrying capacity of 5A or more, but not more than 15A,
—	a contact voltage of 80 VAC (Voltage Alternating Current) or more, but not more than 270 VAC (Voltage Alternating Current),
—	outer dimensions of 19 mm (± 0,4 mm) x 15,2 mm (± 0,4 mm) x 15,5 mm (± 0,4 mm),

for use in the production of control board of household appliances

(1)

0 %

31.12.2024

0.4616

ex 8536 69 90

AC socket with a noise filter, composed of:

—	AC socket (for power cord connection) of 230 V,
—	integrated noise filter composed of capacitors and inductors,
—	cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,

whether or not equipped with a metal support, which joins the AC socket to the PDP TV set

0 %

p/st

31.12.2024

0.6507

ex 8537 10 98

Electronic control unit BCM (Body Control Module) or IBM (Integrated Body Control Module) or similar:

—	comprising at least a plastic box with printed circuit board, with operating direct voltage of 9 V or more, but not more than 16 V,
—	whether or not with metal holder,
—	able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,

of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2024

0.7409

ex 8540 91 00

Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), with electric connectors

—	with or without a metal housing,
—	with or without a graphite carbon shield mounted in a mini-Vogel type system,
—	with or without separate pyrolytic carbon blocks used as heating elements, and
—	a cathode temperature of less than 1 800 K at a filament current of 1,26 A

0 %

31.12.2027

0.2434

ex 8548 00 90

Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing

0 %

p/st

31.12.2023

0.8279

ex 8708 40 20

Transmission gearbox without torque converter, with:

—	dual clutch,
—	7 or more forward gears,
—	1 reverse gear,
—	a maximum torque of 390 Nm,
—	whether or not with electric motor integrated,
—	a height of 400 mm or more but not more than 600 mm,
—	a width 350 mm or more but not more than 600 mm, and
—	a weight of 70 kg or more but not more than 110 kg,

for use in the manufacture of motor vehicles of Heading 8703

(1)

0 %

p/st

31.12.2026

0.7710

ex 8714 99 50

Derailleur gears, consisting of:

—	rear derailleur and mounting articles,
—	with or without front derailleur,

for use in the manufacture of bicycles (including electric bicycles)

(1)

0 %

p/st

31.12.2024

0.7708

ex 8714 99 90

Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles)

(1)

0 %

p/st

31.12.2024

0.7973

ex 9002 11 00

Lens with:

—	motorized focus, zoom, aperture,
—	electronically switchable infrared cut filter,
—	an adjustable focal length not less than 2,7 mm and not more than 55mm,
—	a weight of not more than 120 g,
—	a length of less than 70 mm,
—	a diameter of not more than 70 mm

0 %

31.12.2025

(1)	Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013. ’;

(3)the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Serial Number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

‘0.8448

ex 2835 10 00

Calcium phosphinate (CAS RN 7789-79-9) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8520

ex 2840 20 90

Barium borate (CAS RN 13701-59-2) with a purity by weight of 99 % or more

0 %

31.12.2027

0.8492

ex 2903 99 80

1-Fluoronaphthalene (CAS RN 321-38-0) with a purity by weight of 99 % or more

0 %

31.12.2027

0.8482

ex 2907 29 00

4,4'-Methylenedi-2,6-xylenol (CAS RN 5384-21-4) with a purity by weight of 98,5 % or more

0 %

31.12.2027

0.8495

ex 2915 90 30

Chloromethyl dodecanoate (CAS RN 61413-67-0) with a purity by weight of 97 % or more

0 %

31.12.2027

0.8457

ex 2915 90 70

3-Chloro-2,2-dimethylpropanoyl chloride (CAS RN 4300-97-4) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8489

ex 2916 39 90

Ethyl 4-bromo-3-(bromomethyl)benzoate (CAS RN 347852-72-6) with a purity by weight of 97 % or more

0 %

31.12.2027

0.8509

ex 2918 19 98

(S)-2-Hydroxy-2-phenylacetic acid (CAS RN 17199-29-0) with a purity by weight of 99 % or more

0 %

31.12.2027

0.8511

ex 2920 90 10

Diethyl carbonate (CAS RN 105-58-8) with a purity by weight of 99,9 % or more

3.2 %

31.12.2023

0.8490

ex 2920 90 70

4,4,5,5-Tetramethyl-1,3,2-dioxaborolane (CAS RN 25015-63-8) with a purity by weight of 97 % or more, containing not more than 1 % of the stabiliser triethylamine (CAS RN 121-44-8)

0 %

31.12.2027

0.8477

ex 2921 19 99

N-Ethyl-N-isopropylpropan-2-amine 2-(difluoromethoxy)acetate with a purity by weight of 98 % or more

0 %

31.12.2027

0.8473

ex 2922 50 00

(S)-2-Amino-2-(3-fluoro-5-methoxyphenyl)ethanol hydrochloride (CAS RN 2095692-22-9) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8462

ex 2926 90 70

Lambda-cyhalothrin (ISO) (CAS RN 91465-08-6) with a purity by weight of 97 % or more

0 %

31.12.2027

0.8474

ex 2928 00 90

Ethyl chloro[(4-methoxyphenyl)hydrazono]acetate (CAS RN 27143-07-3) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8451

ex 2929 10 00

Ethyl isocyanate (CAS RN 109-90-0) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8510

ex 2930 90 98

Anhydrous potassium О-isopentyl-dithiocarbonate (CAS RN 928-70-1) with a purity by weight of 90 % or more

0 %

31.12.2027

0.8447

ex 2930 90 98

Thiodiacetic acid (CAS RN 123-93-3) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8481

ex 2930 90 98

2,2'-Diallyl-4,4'-sulphonyldiphenol (CAS RN 41481-66-7) with a purity by weight of 96 % or more

0 %

31.12.2027

0.8478

ex 2932 20 90

(R)-3-(3,4-difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)furan-2(5H)-one (CAS RN 2875066-35-4) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8452

ex 2933 29 90

Cyazofamid (ISO) (CAS RN 120116-88-3) with a purity by weight of 94 % or more

0 %

31.12.2027

0.8485

ex 2933 39 99

Fluazinam (ISO) (CAS RN 79622-59-6) with a purity by weight of 97 % or more

0 %

31.12.2027

0.8456

ex 2933 59 95

5-Chloro-3-nitropyrazolo[1,5-a]pyrimidine (CAS RN 1363380-51-1) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8484

ex 2933 59 95

1,4,5,6-Tetrahydro-1,2-dimethylpyrimidine (CAS RN 4271-96-9) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8488

ex 2933 59 95

Trilaciclib (CAS RN 1374743-00-6) with a purity by weight of 99 % or more

0 %

31.12.2027

0.8455

ex 2933 99 80

4-([1,2,4]Triazolo[1,5-a]pyridin-7-yloxy)-3-methylaniline (CAS RN 937263-71-3) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8487

ex 2934 99 90

Cedazuridine (INN) (CAS RN 1141397-80-9) with a purity by weight of 99 % or more

0 %

31.12.2027

0.8472

ex 2934 99 90

(R)-tert-butyl 2-(6-(5-chloro-2-((tetrahydro-2H-pyran-4-yl)amino)pyrimidin-4-yl)-1-oxoisoindolin-2-yl)propanoate (CAS RN 2095665-45-3) with a purity by weight of 98 % or more

0 %

31.12.2027

0.8449

ex 2934 99 90

3-[2-{(2R,3S)-3-[(1R)-1-{[tert-butyl(dimethyl)silyl]oxy}ethyl]-4-oxoazetidin-2-yl}propanoyl]-4,4-dimethyl-1,3-oxazolidin-2-one (isomeric mixture of CAS RNs 114341-89-8 and 114418-63-2) with a purity by weight of 99 % or more

0 %

31.12.2027

0.8479

ex 2935 90 90

2-Bromo-N-(4,5-dimethyl-1,2-oxazol-3-yl)-N-(methoxymethyl) benzene-1-sulfonamide (CAS RN 415697-57-3) with a purity by weight of 97 % or more

0 %

31.12.2027

0.8467

ex 2935 90 90

5-(2-Fluorophenyl)-1-(pyridin-3-ylsulfonyl)-1H-pyrrole-3-carbaldehyde (CAS RN 881677-11-8) with a purity by weight of 97 % or more

0 %

31.12.2027

0.8471

ex 3824 99 92

Tri-C8-10-alkyl amines (CAS RN 68814-95-9) with a purity by weight of 95 % or more

0 %

31.12.2027

0.8463

ex 3824 99 92

Reaction mass containing by weight:

—	22,4 % or more, but not more than 26,4 % of 3-methylphenyl diphenyl phosphate (CAS RN 69500-28-3);
—	17,3 % or more, but not more than 21,3 % of 4-methylphenyl diphenyl phosphate (CAS RN 78-31-9);
—	5 % or more, but not more than 9 % of bis(3-methylphenyl) phenyl phosphate (CAS RN 34909-68-7);
—	8,9 % or more, but not more than 12,9 % of 3-methylphenyl 4-methylphenyl phenyl phosphate (CAS RN 222165-66-4);
—	26,9 % or more, but not more than 30,9 % of triphenyl phosphate (CAS RN 115-86-6)

0 %

31.12.2027

0.8486

ex 3824 99 92

Mixture, containing by weight:

—	not more than 75 % of tetrabutyltin (CAS RN 1461-25-2),
—	not more than 20 % of tributyltin chloride (CAS RN 1461-22-9),
—	not more than 4 % of dibutyltin dichloride (CAS RN 683-18-1),

for use in the production of butyltin compounds used in glass manufacture and tributyltin chloride used as a catalyst in the pharmaceutical industry

(1)

3.2 %

31.12.2027

0.8506

ex 3824 99 92

Mixture, containing by weight:

—	tributyltin chloride (CAS RN 1461-22-9) with a purity by weight of 80 % or more,
—	not more than 5 % tetrabutyltin (CAS RN 1461-25-2),
—	not more than 6 % dibutyltin dichloride (CAS RN 683-18-1),
—	not more than 11 % o-xylene (CAS RN 95-47-6),

for use in the production of tributyltin chloride used as a catalyst in the pharmaceutical industry

(1)

3.2 %

31.12.2027

0.8517

ex 3824 99 92

1-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity by weight of 70 % or more, but not more than 90 %

0 %

31.12.2024

0.8499

ex 3824 99 92

Tall oil N,N-dimethyl fatty amides (CAS RN 68308-74-7) with a purity by weight of 99 % or more

0 %

31.12.2027

0.8498

ex 3824 99 93

Preparation containing by weight

—	60 % or more but not more than 70 % of calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1),
—	30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1),
—	1 % or more but not more than 5 % of CI Pigment Blue 29 (CAS RN 57455-37-5) and
—	1 % or more but not more than 5 % of CI Pigment Violet 15 (CAS RN 12769-96-9)

0 %

31.12.2027

0.8497

ex 3824 99 93

Preparation containing by weight 60 % or more but not more than 70 % of calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1) and 30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1)

0 %

31.12.2027

0.8514

ex 3824 99 96

2-(Ethylthio)ethanethiol functionalized silicagel with a purity by weight of 98 % or more

0 %

31.12.2027

0.8491

ex 3907 29 99

Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) (CAS RN 29658-26-2) containing by weight not more than 35 % of additives

0 %

31.12.2027

0.8504

ex 4009 31 00

ex 4009 32 00

Multilayered rubber pipe, reinforced with aramide fabric, whether or not having polyamide connection elements and steel clamps, for use in the manufacture of automotive heat exchangers and/or condenser in automotive air conditioning systems

(1)

0 %

31.12.2027

0.8480

ex 7326 90 98

Vane ring of a kind for fastening gas flow control blades:

—	of iron or steel alloy,
—	with a heat resistance of 830 °C or more but not more than 1 050 °C,
—	with an external diameter of not more than 92 mm,
—	with holes for holding the gas flow control blades,

for use in the manufacture of turbochargers

(1)

0 %

31.12.2027

0.8512

ex 7326 90 98

Disc of a kind for ensuring the gas flow channel width:

—	of iron or steel alloy,
—	with a heat resistance of 830 °C or more but not more than 1 050 °C,
—	with an external diameter of not more than 92,5 mm,
—	with an internal diameter of not more than 62 mm,

for use in the manufacture of turbochargers

(1)

0 %

31.12.2027

0.8464

ex 7609 00 00

Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers:

—	with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,
—	with a weight of 0,02 kg or more, but not more than 0,25 kg,

for use in the manufacture of cooling system in vehicles of Chapter 87

(1)

0 %

p/st

31.12.2027

0.8503

ex 7609 00 00

Machined aluminium components:

—	containing by weight 0,55 %, or more but not more than 0,61 % of magnesium,
—	containing by weight 0,55 %, or more but not more than 0,61 % of silicon,
—	with a hardening state of T5 or T6,
—	with a mass of 0,05 kg or more, but not more than 0,2 kg,

for use in the manufacture of CO2 cooling systems in motor vehicles

(1)

0 %

p/st

31.12.2027

0.8493

ex 7609 00 00

Aluminium connection block:

—	with a weight of 3 g or more but not more than 400 g,
—	manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade,
—	being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly,
—	with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line),
—	with sockets designed for brazing or fastening,
—	with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm,

for the manufacture of automotive cooling and air conditioning systems

(1)

0 %

p/st

31.12.2027

0.8466

ex 8409 91 00

Camshaft carrier for a spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, with:

—	a weight of 4,0 kg or more but not more than 5,5 kg,
—	a wall thickness of 2,0 mm or more but not more than 6,0 mm,

for use in the manufacture of motor vehicle engines

(1)

0 %

p/st

31.12.2027

0.8469

ex 8409 91 00

Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, for use in the manufacture of motor vehicle engines

(1)

0 %

31.12.2027

0.8483

ex 8414 90 00

Fan assembly made of aluminium and magnesium alloy:

—	with an outer diameter of 54 mm or more but not more than 130 mm,
—	with a height of 8 mm or more but not more than 30 mm,
—	with two discs connected by blades of involute shape,
—	with or without dowel, and with or without washer,

for use in the manufacture of electromotors

(1)

0 %

31.12.2027

0.8494

ex 8414 90 00

Scroll type compressor housing of an aluminium alloy of a kind with:

—	a heat resistance of 200 °C or more but not more than 250 °C,
—	one or more fixing points suitable for mounting an actuator,

for use in the manufacture of turbochargers

(1)

0 %

31.12.2027

0.8465

ex 8415 90 00

Electrically welded manifolds for the condenser in automotive air conditioning systems:

—	consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding,
—	containing internal baffles responsible for the proper flow of coolant,
—	with a length of 190 mm or more, but not more than 460 mm,
—	with a diameter of 9 mm or more, but not more than 42 mm,
—	with a weight of 0,01 kg or more, but not more than 0,45 kg,
—	whether or not having aluminium connection blocks,

used in the production of air conditioning systems in vehicles of Chapter 87

(1)

0 %

p/st

31.12.2027

0.8458

ex 8501 53 50

Asynchronous traction motor, with:

—	a continuous power of 140 kW or more but not more than 180 kW,
—	a liquid cooled system,
—	a total length of 580 mm or more but not more than 730 mm,
—	a total width of 550 mm or more but not more than 670 mm,
—	a total height of 510 mm or more but not more than 630 mm,
—	with a weight of not more than 390 kg,
—	with or without reduction gear,
—	with or without starter generator,
—	2 mounting points,

for use in the manufacture of the electric drive of hybrid buses

(1)

0 %

31.12.2027

0.8508

ex 8505 11 10

Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions:

—	a length of 200 mm or more but not more than 205 mm,
—	a width of 58 mm or more but not more than 62 mm,
—	a height of 25 mm or more but not more than 30 mm,

with a stud mounted in the middle

0 %

31.12.2027

0.8453

ex 8512 30 90

Device for simulating engine sound at reduced speed of a hybrid or electric vehicle:

—	containing at least printed circuit board and loudspeaker,
—	in a plastic housing with a holder,

for use in the manufacture of goods of Chapter 87

(1)

0 %

31.12.2027

0.8460

ex 8537 10 91

Electronic suspension control unit with:

—	a printed circuit board in plastic housing,
—	LIN and CAN buses,
—	a programmable memory,
—	a signal processor,
—	an operating direct current voltage of 9 V or more but not more than 16 V,
—	at least one connector,
—	whether or not with metal mounting bracket,

for use in the manufacture of goods of Chapter 87

(1)

0 %

31.12.2027

0.8461

ex 8708 50 20

Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of:

—	two cardan rods,
—	central universal joint,
—	central bearing with suspension in a plastic cover,
—	universal joints on both ends of the shaft,
—	slip, tube and end yokes,
—	of a length of 1,4 m or more but not more than 2,4 m,

for use in the production of goods of Chapter 87

(1)

0 %

31.12.2027

0.8507

ex 8714 99 90

Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles

(1)

0 %

31.12.2027

(1)	Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’.

Top