(1)

In accordance with Article 12 of Directive 2014/68/EU of the European Parliament and of the Council (2), pressure equipment or assemblies referred to in Article 4(1) and (2) of that Directive which are in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, are to be presumed to be in conformity with the essential safety requirements covered by those standards or parts thereof referred to in Annex I to that Directive.

(2)

By letter M/071 of 1 August 1994 the Commission made a request to the European Committee for Standardisation (CEN) for drawing up, in relation to the pressure equipment, the product related standards and the standards of a horizontal nature in support of Directive 97/23/EC of the European Parliament and of the Council (3). That Directive was replaced by Directive 2014/68/EU without changing the essential safety requirements referred to in Annex I to Directive 97/23/EC.

(3)

On the basis of the request M/071, CEN drafted the harmonised standard EN 13445-10:2021 on unfired pressure vessels of nickel and nickel alloys and harmonised standard EN 17278:2021 on vehicle fuelling appliances for natural gas vehicles.

(4)

On the basis of the request M/071 and in order to reflect the state of the art, CEN revised and amended some of the existing harmonised standards. Specifically, CEN revised harmonised standards EN 10216-5:2013 and EN 10217-7:2014 the references of which have been published by Commission Communication 2016/C 293/01 (4) which resulted in adoption of harmonised standards EN 10216-5:2021 and EN 10217-7:2021, respectively, on seamless and welded stainless steel tubes for pressure purposes. CEN also amended the harmonised standards EN 10222-2:2017 and EN 10222-4:2017 the references of which have been published by Commission communication 2017/C 389/01 (5) which resulted in adoption of harmonised standards EN 10222-2:2017+A1:2021 and EN 10222-4:2017+A1:2021 on steel forgings for pressure purposes.

(5)

Additionally, CEN revised the following harmonised standards on unfired pressure vessels the references of which have been published by Communication 2016/C 293/01: EN 13445-1:2014, EN 13445-1:2014/A1:2014, EN 13445-4:2014, EN 13445-8:2014 and EN 13445-8:2014/A1:2014. This resulted in the adoption of, respectively, the following harmonised standards: EN 13445-1:2021, EN 13445-4:2021 and EN 13445-8:2021.

(6)

In addition, on the basis of the request M/071, CEN amended the following standards, the references of which are included in Annex I to Commission Implementing Decision (EU) 2019/1616 (6): EN 13445-2:2014, EN 13445-2:2014/A1:2016, EN 13445-2:2014/A2:2018, EN 13445-2:2014/A3:2018 on materials for unfired pressure vessels; EN 13445-3:2014, EN 13445-3:2014/A1:2015, EN 13445-3:2014/A2:2016, EN 13445-3:2014/A3:2017, EN 13445-3:2014/A4:2018, EN 13445-3:2014/A5:2018, EN 13445-3:2014/A6:2019, EN 13445-3:2014/A7:2019 and EN 13445-3:2014/A8:2019 on design of unfired pressure vessels; EN 13445-5:2014, EN 13445-5:2014/A1:2018 on inspection and testing for unfired pressure vessels and EN 13445-6:2014, EN 13445-6:2014/A2:2018 on design and fabrication of unfired pressure vessels constructed from spheroidal graphite cast iron. This resulted in the adoption of the harmonised standards EN 13445-2:2021, EN 13445-3:2021, EN 13445-5:2021 and EN 13445-6:2021.

(7)

The Commission together with CEN has assessed whether those standards on the pressure equipment as drafted, amended or revised by CEN comply with the request M/071.

(8)

The standards on the pressure equipment as drafted, amended or revised by CEN satisfy the requirements which they aim to cover and which are referred to in Annex I to Directive 2014/68/EU. It is therefore appropriate to publish the references of those standards in the Official Journal of the European Union.

(9)

Annex I to Implementing Decision (EU) 2019/1616 lists the references of harmonised standards drafted in support of Directive 2014/68/EU. The references of harmonised standards EN 13445-10:2021, EN 17278:2021, EN 10216-5:2021, EN 10217-7:2021, EN 10222-2:2017+A1:2021, EN 10222-4:2017+A1:2021, EN 13445-1:2021, EN 13445-4:2021, EN 13445-8:2021, EN 13445-2:2021, EN 13445-3:2021, EN 13445-5:2021 and EN 13445-6:2021 should be included in that Annex.

(10)

Annex II to Implementing Decision (EU) 2019/1616 lists the references of harmonised standards drafted in support of Directive 2014/68/EU that are withdrawn from the Official Journal of the European Union. The following harmonised standards the references of which are published by communications 2016/C 293/01 and 2017/C 389/01 have been replaced, revised or amended: EN 10216-5:2013, EN 10217-7:2014, EN 10222-2:2017, EN 10222-4:2017, EN 13445-1:2014, EN 13445-1:2014/A1:2014, EN 13445-4:2014, EN 13445-8:2014, EN 13445-8:2014/A1:2014. The references of those standards should therefore be included in Annex II to Implementing Decision (EU) 2019/1616.

(11)

It is also necessary to withdraw the references of harmonised standards EN 13445-2:2014, EN 13445-3:2014, EN 13445-5:2014 and EN 13445-6:2014 together with any amendments thereof published by Implementing Decision (EU) 2019/1616, given that they have been replaced. It is therefore appropriate to delete those references from Annex I to that Implementing Decision.

(12)

In order to give manufacturers sufficient time to prepare for the application of the new standards, revised standards or amended standards, it is necessary to defer the withdrawal of the references of harmonised standards.

(13)

Implementing Decision (EU) 2019/1616 should therefore be amended accordingly.

(14)

Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,

(1)

Annex I is amended in accordance with Annex I to this Decision;

(2)

Annex II is amended in accordance with Annex II to this Decision.