2003/128/EG: Beschluss Nr. 1/2003 vom 28. Januar 2003 des mit dem Abkommen zwischen der Europäischen Gemeinschaft und der Schweizerischen Eidgenossenschaft über die gegenseitige Anerkennung betreffend die Konformitätsbewertung eingesetzten Ausschusses zur Aufstellung der Liste der im Rahmen des Abkommens anerkannten Konformitätsbewertungsstellen

Amtsblatt Nr. L 056 vom 01/03/2003 S. 0001 - 0213

Beschluss Nr. 1/2003

vom 28. Januar 2003

des mit dem Abkommen zwischen der Europäischen Gemeinschaft und der Schweizerischen Eidgenossenschaft über die gegenseitige Anerkennung betreffend die Konformitätsbewertung eingesetzten Ausschusses zur Aufstellung der Liste der im Rahmen des Abkommens anerkannten Konformitätsbewertungsstellen

(2003/128/EG)

DER AUSSCHUSS -

gestützt auf das am 21. Juni 1999 unterzeichnete Abkommen zwischen der Europäischen Gemeinschaft und der Schweizerischen Eidgenossenschaft über die gegenseitige Anerkennung (im Folgenden "das Abkommen" genannt) betreffend die Konformitätsbewertung, insbesondere auf Artikel 10 Absatz 4 Buchstabe a) und Artikel 11,

in Erwägung nachstehender Gründe:

Das Abkommen ist am 1. Juni 2002 in Kraft getreten.

Der Ausschuss muss über die Aufstellung der Liste der im Rahmen des Abkommens anerkannten Konformitätsbewertungsstellen beschließen -

BESCHLIESST:

Artikel 1

1. Die in Anhang A aufgeführten schweizerischen Konformitätsbewertungsstellen werden in Anhang 1 des Abkommens aufgenommen.

2. Die in Anhang B aufgeführten europäischen Konformitätsbewertungsstellen werden in Anhang 1 des Abkommens aufgenommen.

Artikel 2

Dieser Beschluss ist in zwei Urschriften abgefasst und wird von den beiden Vorsitzenden des Ausschusses oder anderen Personen, die befugt sind, im Namen der Vertragsparteien zu handeln, unterzeichnet. Er tritt zu dem Zeitpunkt, zu dem die letzte Unterschrift geleistet wird, in Kraft.

Unterzeichnet in Bern am 14. Januar 2003

Für die Schweizerische Eidgenossenschaft

Heinz Hertig

Unterzeichnet in Brüssel am 28. Januar 2003

Für die Europäische Gemeinschaft

Paul de Lusignan

ANNEX A

List of Swiss Conformity Assessment Bodies

SWISS CONFORMITY ASSESSMENT BODIES NOTIFIED UNDER EU-SWITZERLAND MRA

>PLATZ FÜR EINE TABELLE>

SWISS AUTHORITIES RESPONSIBLE FOR TYPE-APPROVAL, TECHNICAL SERVICES AND TESTING BODIES UNDER MOTOR VEHICLES CHAPTER

>PLATZ FÜR EINE TABELLE>

ANNEX B

LIST OF SWISS CONFORMITY ASSESSMENT BODIES

CHAPTER 1

MACHINERY

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 98/37/EC MACHINERY

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

AIB-VINÇOTTE INTERNATIONAL S.A. 27-29, avenue André Drouart 1160 BRUXELLES Belgium

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Band-saws with a fixed or mobile bed and band-saws with a mobile carriage, with manual loading and/or unloading, for working with wood and analogous materials or for working with meat and analogous materials (section A4 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s. (section A9 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

INSTITUTO DE SOLDADURA E QUALIDADE (ISQ) EN 249 - Km 3, Cabanas - Leião Tagus Park Ap119-2781 OEIRAS CODEX Portugal

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

TÜV NORD CERT GMBH & CO. KG Am TÜV 1 30519 HANNOVER Germany

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

- internal combustion engines to be fitted to machinery for underground working

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

TÜV SAARLAND E.V. Saarbrücker Strasse, 8 66280 SULZBACH Germany

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous

materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

TÜV ANLAGENTECHNIK GMBH

UNTERNEHMENSGRUPPE TÜV

RHEINLAND/BERLIN-BRANDENBURG

Am Grauen Stein D - 51105 Köln Germany

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous

materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c),

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

TÜV SÜDDEUTSCHLAND BAU UND BETRIEB GMBH Westendstraße, 199 80686 MÜNCHEN Germany

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

ZURICH CERTIFICATION LIMITED 54, Hagley Road - Edgbaston B16 8QP BIRMINGHAM United Kingdom

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

LLOYD'S REGISTER OF SHIPPING - UK INDUSTRY - STATUTORY SERVICES Middlemarch Office Village/Siskin Drive CV3 4FJ COVENTRY United Kingdom

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

ROYAL & SUN ALLIANCE INSURANCE PLC

(Trading as Royal & Sun Alliance Certification Services)

17 York Street M2 3RS MANCHESTER United Kingdom

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

PLANT SAFETY LTD Parklands - Wilmslow Road - Didsbury M20 2RE MANCHESTER United Kingdom

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

PLANT SAFETY LTD Parklands - Wilmslow Road - Didsbury M20 2RE MANCHESTER United Kingdom

Machines for the manufacture of pyrotechnics (section A17 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

RWTÜV ANLAGENTECHNIK GMBH Langemarkstrasse, 20 45138 ESSEN Germany

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Presses, including press-brakes, for the cold working of metals, manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s. (section A9 of annex IV)

Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

NATIONAL STANDARDS AUTHORITY OF IRELAND (NSAI) Glasnevin 9 DUBLIN Ireland

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

ISTITUTO ITALIANO DEL MARCHIO DI QUALITÀ (IMQ S.P.A.) Via Quintiliano, 43 20138 MILANO Italy

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Machines for the manufacture of pyrotechnics (section A17 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

CUALICONTROL ACI, S.A. Caleruega, 67 1a pianta 28033 MADRID Spain

For all machines listed in annex IV.A (except A16 and A17) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

ASISTENCIA TECNICA INDUSTRIAL S.A.E. Avenida de la Industria, 15 bis 28760 TRES CANTOS Spain

For all machines listed in annex IV.A (except A16 and A17) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

BUREAU VERITAS ESPAÑOL S.A. c/ Francisca Delgado, 11 - Arroyo de Vega 28109 ALCOBENDAS Spain

For all products listed in annex IV Receipt of technical file Annex VI Article 8, 2(c), 1st indent

ENTIDAD COLABORADORA DE LA ADMINISTRACION S.A. Avenida Tibidabo, 30 08022 BARCELONA Spain

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

EUROCONTROL S.A. C/ Zurbano, 39 28010 MADRID Spain

For all machines listed in annex IV.A (except A16 and A17) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

INSPECCION Y GARANTIA DE CALIDAD S.A. Via de los Dos Castillas,33 Ctr E. Atic7 28224 POZUELO DE ALARCON Spain

For all machines listed in annex IV.A (except A16 and A17) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

NORCONTROL S.A. Ctra. Nacional VI, km. 582 15168 SADA Spain

For all machines listed in annex IV.A (except A16 and A17) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

BUREAU VERITAS 17 place des Reflets - La Défense 2 92400 COURBEVOIE France

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

INSTITUTO PORTUGUES DA QUALIDADE Rua António Gião, 2 2829-513 CAPARICA Portugal

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

ISTITUTO DI CERTIFICAZIONE EUROPEO PRODOTTI INDUSTRIALI S.R.L. Via Emilia Parmense, 11 A 29010 PONTENURE (PC) Italy

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

ISTITUTO DI RICERCHE E COLLAUDI M. MASINI SRL Via Moscova 11 20017 RHO Italy

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

ISTITUTO DI RICERCHE E COLLAUDI M. MASINI SRL Via Moscova 11 20017 RHO Italy

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Machines for the manufacture of pyrotechnics (section A17 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

INSTITUT NATIONAL DE RECHERCHE ET DE SÉCURITÉ B.P. 27 54501 Vandoeuvre Cedex France

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

APAVE PARISIENNE 97-103 boulevard Victor Hugo 93400 SAINT OUEN France

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

INSTITUT NATIONAL DE L'ENVIRONNEMENT INDUSTRIEL ET DES RISQUES Parc Technique ALATABP 2 60550 VERNEUIL-EN-HALATTE France

Machines for the manufacture of pyrotechnics (section A17 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

LABORATOIRE CENTRAL DES INDUSTRIES ÉLECTRIQUES Avenue du Général Leclerc, 33 92266 FONTENAY-AUX-ROSES France

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

APAVE LYONNAISE B.P. 3 69811 TASSIN France

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

BSI 389 Chiswick High Road W4 4AL LONDON United Kingdom

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

ICICT S.A. C/ Garrotxa 10-12, Parque NMB Ed

Ocean

8820 EL PRAT DE LLOBREGAT Spain

For all machines listed in annex IV.A (except A16 and A17) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

LLOYD'S REGISTER ESPAÑA, S.A. C/ Princesa, 29-1o 28008 MADRID Spain

For all machines listed in annex IV.A (except A16 and A17) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

NOVOTEC CONSULTORES, S.A. C/ Arturo Soria, 343 28033 MADRID Spain

For all machines listed in annex IV.A (except A16 and A17) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

SGS, TECNOS, S.A. C/ Trespaderne, 29 28042 MADRID Spain

For all machines listed in annex IV.A (except A16 and A17) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

ASOCIACIÓN ESPAÑOLA DE NORMALIZACIÓN Y CERTIFICACIÓN (AENOR) C/ Génova, 6 E - 28004 MADRID Spain

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

ASOCIACIÓN ESPAÑOLA DE NORMALIZACIÓN Y CERTIFICACIÓN (AENOR) C/ Génova, 6 E - 28004 MADRID Spain

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

BERUFSGENOSSENSCHAFTLICHES INSTITUT FÜR ARBEITSSICHERHEIT Alte Heerstraße, 111 53754 SANKT AUGUSTIN Germany

121

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

TÜV PRODUCT SERVICE GMBH Ridlerstraße, 65 80339 MÜNCHEN Germany

123

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

LGA - LANDESGEWERBEANSTALT BAYERN Tillystraße, 2 90431 Nürnberg Germany

125

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

DEUTSCHE MONTAN TECHNOLOGIE GMBH Am Technologiepark, 1 45307 ESSEN Germany

158

Machinery for underground working of the following types: (section A12 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

LABORATORIO OFICIAL JOSE MARIA DE MADARIAGA Calle Alenza, 2 28003 MADRID Spain

163

Machinery for underground working of the following types: (section A12 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Machines for the manufacture of pyrotechnics (section A17 of annex IV)

TÜV RHEINLAND PRODUCT SAFETY GMBH Am Grauen Stein 51105 Köln Germany

197

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

AGENZIA NAZIONALE CERTIFICAZIONE COMPONENTI E PRODOTTI SRL Via Bronzino, 3 20133 MILANO Italy

302

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

ISTITUTO CERTIFICAZIONE EUROPEA S.R.L. Via Garibaldi, 20 40011 ANZOLA Italy

303

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Vehicles servicing lifts (section A15 of annex IV)

FACHAUSSCHUSS "ELEKTROTECHNIK"

PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT

Gustav-Heinemann-Ufer 130 50968 Köln Germany

340

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

KEMA QUALITY B.V. Utrechtseweg 310 ( Postbus 9035 ) 6800 ET ARNHEM Netherlands

344

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c),

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

SGS UNITED KINGDOM LTD

INTERNATIONAL ELECTRICAL APPROVALS

South Industrial Estate, Bowburn DH6 5AD DURHAM United Kingdom

353

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV) Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c),

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

ITS TESTING AND CERTIFICATION LTD ITS House, Cleeve Road KT22 7SB Leatherhead United Kingdom

359

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Machines for the manufacture of pyrotechnics (section A17 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

DEUTSCHE PRÜFSTELLE FÜR LAND- UND FORSTTECHNIK Weissensteinstraße 70/72 34114 KASSEL Germany

363

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Portable chain saws for woodworking (section A8 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

ELOT - HELLENIC ORGANIZATION FOR STANDARDIZATION Acharnon Street 313 11145 ATHENS Greece

365

For all products listed in annex IV Receipt of technical file Annex VI Article 8, 2(c), 1st indent

VDE - VERBAND DER ELEKTROTECHNIK ELEKTRONIK

INFORMATIONSTECHNIK E.V. - VDE

PRÜF- UND ZERTIFIZIERUNGSSTELLE

Merianstraße, 28 63069 OFFENBACH (AM MAIN) Germany

366

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

LABORATORI GENERAL D'ASSAIGS I INVESTIGACIONS (LGAI) Campus UAB, Apto Correos 18 8193 BELLATERRA Spain

370

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

ASSOCIATION POUR LE DÉVELOPPEMENT DE L'INSTITUT DE LA VIANDE BP 3 - Saint-Jean 63015 Clermont-Ferrand Cedex France

381

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

AIF SERVICES SA Zone industrielle de Magré - BP 308 87008 Limoges Cedex France

384

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

ASSOCIATION INTERPROFESSIONNELLE DE FRANCE - AINF Zone industrielle - rue Marcel Dassault 59472 SECLIN France

385

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

APAVE ALSACIENNE Rue Thiers, 2 - BP 1347 68056 Mulhouse Cedex France

387

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

CENTRE NATIONAL DU MACHINISME AGRICOLE, DU GÉNIE RURAL, DES EAUX ET FORETS Parc de Tourvoie - BP 44 92163 Antony Cedex France

388

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

FACHAUSSCHUSS FLEISCHWIRTSCHAFT

PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT

Lortzingstraße, 2 55127 MAINZ Germany

391

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

FACHAUSSCHUSS HOLZ

PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT

Vollmöllerstraße, 11 70563 STUTTGART Germany

392

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

FACHAUSSCHUSS EISEN UND METALL III UND HEBEZEUGE

PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT

Kreuzstraße, 45 40210 DÜSSELDORF Germany

393

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

LABORATORIOS DEL AREA DE VERIFICACIÓN DE MAQUINARIA

CENTRO NACIONAL DE VERIFICACIÓN DE MAQUINARIA DE VISCAYA DEL INSTITUTO NACIONAL DE SEGURIDAD E HIGIENE

C/Camino de la dinamita S/N 48903 CRUCES/BARACALDO Spain

394

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

DANSK TEKNOLOGISK INSTITUT - INDUSTRIEL TEKNOLOGI Teknologiparken 8000 Århus C Denmark

396

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

ORGANISMO DI CERTIFICAZIONE EUROPEA SRL Via Ancona, 21 00198 ROMA Italy

397

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV) Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c),

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

ISTITUTO DI RICERCHE, PROVE E ANALISI SRL Via Artigiani, 63 25040 BIENNO Italy

398

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

ISTITUTO DI RICERCHE, PROVE E ANALISI SRL Via Artigiani, 63 25040 BIENNO Italy

398

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

ABOMA + KEBOMA B.V. Galvanistraat, 1 - Postbus 141 6710BC EDE Netherlands

399

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

STICHTING NEDERLANDS INSTITUUT VOOR LIFTTECHNIEK (LIFTINSTITUUT) Buikslotermeerplein 381 Postbus 36027 1025 XE AMSTERDAM Netherlands

400

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

SP - SWEDISH NATIONAL TESTING AND RESEARCH INSTITUTE LTD Box 857 501 15 BORÅS Sweden

402

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

SVENSK MASKINPROVNING AB - SMP Fyrisborgsgatan 3 754 50 UPPSALA Sweden

404

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- Sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

- machinery on rails: locomotives and brake-vans

- internal combustion engines to be fitted to machinery for underground working

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

(Restricted to mobile elevating work platforms)

Roll-over protection structures (ROPS) (section B4 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Fallings-object protective structures (FOPS) (section B5 of annex IV)

ISTITUTO GIORDANO S.P.A. Via Rossini, 2 47041 BELLARIA IGEA MARINA Italy

407

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV) Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

TÜV-ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c),

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

DET NORSKE VERITAS INSPECTION AB Warfvinges väg 19B - PO Box 30234 104 25 STOCKHOLM Sweden

409

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

SEMKO AB Torshamnsgatan, 43 164 22 KISTA Sweden

413

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

The following machines are restricted to those that are electrically operated and with an effect not exceeding 4 kW.

FACHAUSSCHUSS "VERKEHR"

PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT

Ottenser Hauptstrasse 54 22765 HAMBURG Germany

417

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

FACHAUSSCHUSS "CHEMIE"

PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT

Heidenkampsweg 73 20097 HAMBURG Germany

418

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

INSPECTA OY PO Box 44 00811 HELSINKI Finland

424

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

ISTITUTO DI CERTIFICAZIONE INDUSTRIALE PER LA MECCANICA S.P.A. (ICIM S.P.A.) Via G. Giardino, 4 20123 MILANO Italy

425

Portable chain saws for woodworking (section A8 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

CONSORZIO ITALCERT Viale Sarca, 336 20126 MILANO Italy

426

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

MATERIALPRÜFUNGSAMT NORDRHEIN-WESTFALEN (MPA NRW) Marsbruchstraße 186 D - 44287 DORTMUND Germany

432

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Machinery for underground working of the following types: (section A12 of annex IV)

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Vehicles servicing lifts (section A15 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

AMTRI VERITAS LIMITED Hulley Road SK10 2NE Macclesfield United Kingdom

463

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

REGISTRO ITALIANO NAVALE Via Corsica 12 16128 GENOVA Italy

474

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

ISTITUTO ITALIANO DELLA SALDATURA Lungo Bisagno Istria 15 16141 GENOVA Italy

475

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

CERMET Via Aldo Moro, 22 40068 S. LAZZARO DI SAVENA Italy

476

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

SLG PRÜF UND ZERTIFIZIERUNGS GMBH Burgstädedter Straße 20 09232 Hartmannsdorf Germany

494

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

INDUSTRIAL ENGINEERING CONSULTANTS SRL Via Botticelli, 151 10154 Torino Italy

495

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

CONSORZIO DNV - MODULO UNO Via Paracelso 20, 20041 AGRATE BRIANZA Italy

496

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

STICHTING KEURINGSBUREAU HOUT (SKH) Huizermaatweg, 29 PO Box 50, 1270 AB 1273 NA HUIZEN Netherlands

502

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

AGRICULTURAL RESEARCH CENTRE OF FINLAND - MTT/VAKOLA Vakolantie 55 03400 VIHTI Finland

504

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

VENETA ENGINEERING SRL Via Lovanio 8/10 37135 VERONA Italy

505

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Receipt of technical file Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Machines for the manufacture of pyrotechnics (section A17 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

FACHAUSSCHUSS TIEFBAU

PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT

Landsberger Straße 309 80687 MÜNCHEN Germany

515

Roll-over protection structures (ROPS) (section B4 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Fallings-object protective structures (FOPS) (section B5 of annex IV)

CENTRE TECHNIQUE DES INDUSTRIES MÉCANIQUES (CETIM) 52, rue Felix Louat - B.P. 80067 60304 SENLIS France

526

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

ISTEDIL SPA - ISTITUTO SPERIMENTALE PER L'EDILIZIA Via Tiburtina Km 18,300 00012 Setteville di Guidonia Italy

529

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Machines for the manufacture of pyrotechnics (section A17 of annex IV)

TECHNISCHE PRÜFSTELLE DIENSTBIER & PIX Hundert Beete, 13 91334 Hemhofen Germany

533

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

VTT INDUSTRIAL SYSTEMS (VTT TUOTTEET JA TUOTANTO) P.O. Box 13001 33101 Tampere Finland

537

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

UL INTERNATIONAL DEMKO A/S Lyskær, 8 - Postboks 514 2730 HERLEV Denmark

539

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

POWERED ACCESS CERTIFICATION LIMITED P.O. Box 27 LA6 1GA Carnforth United Kingdom

545

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

FACHAUSSCHUSS "BAU"

PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT

Steinhäuser Straße 10 76135 KARLSRUHE Germany

547

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

FACHAUSSCHUSS NAHRUNGS- UND GENUSSMITTEL

Prüf- und Zertifizierungsstelle im BG-PRÜ

Dynamostraße, 7-11 68165 MANNHEIM Germany

556

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

GESELLSCHAFT FÜR SICHERHEITSTECHNIK UND PRÜFWESEN mbH Im Rehwinkel 19 53578 WINDHAGEN Germany

583

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

SGS FIMKO OY P.O. Box 30 ( Särkiniementie 3 ) 00211 HELSINKI Finland

598

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

ELECTRICAL INSPECTION FIMTEKNO OY P.O. Box 38 00211 HELSINKI Finland

599

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

SGS TECHNISCHE INSPECTIES B.V. Malledijk 18 - Postbus 200 3200 AE SPIJKENISSE Netherlands

608

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

HELLENIC REGISTER OF SHIPPING Akti Miaouli 23 185 35 PIRAEUS Greece

618

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

DELTA KVALITET & CERTIFICERING Venlighedsvej, 4 2970 Hørsholm Denmark

634

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

ÅF- KONTROLL AB PO Box 35 104 25 STOCKHOLM Sweden

640

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

TUV HELLAS S.A. 24, El. Venizelou Street 15341 AG. PARASKEVI Greece

654

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

For all machines listed in annex IV (except A15 and A16) Receipt of technical file

Certification of adequacy for the technical file

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

FORCE TECHNOLOGY SWEDEN AB Tallmätargatan 7 721 34 VASTERÅS Sweden

655

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

TECHNOLOGY INTERNATIONAL (EUROPE) LTD 60 Shrivenham Hundred Business Park SN6 8TY SWINDON United Kingdom

673

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

LONGLANDS CERTIFICATION

LONGLANDS ADVISORY AND CONSULTANCY SERVICES

Teesside Tertiary College - Morton Road TS4 3RX CLEVELAND United Kingdom

675

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

KONHEF vzw Gijzelaarsstraat 7-9-11 2000 Antwerpen Belgium

683

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

FACHAUSSCHUSS MASCHINENBAU, FERTIGUNGSSYSTEME, STAHLBAU

PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT

Wilhelm-Theodor-Römheld Str. 15 55130 MAINZ Germany

697

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

EUROPEAN CERTIFYING ORGANIZATION SPA Via Granarolo, 62 48018 FAENZA Italy

714

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Portable chain saws for woodworking (section A8 of annex IV)

Machinery for underground working of the following types: (section A12 of annex IV)

- machinery on rails: locomotives and brake-vans

- hydraulic-powered roof supports

- internal combustion engines to be fitted to machinery for underground working

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Falling-object protective structures (FOPS) (section B5 of annex IV)

AGENCIA PER L'ALTA TECNOLOGIA Via Pian dei Carpini 28

50127 FIRENZE Italy

715

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

INSTITUTO PER LE MACCHINE

MOVIMENTO TERRA E VEICOLI

FLUORISTRADA

Via Canal Bianco, 28 44044 CASSANA Italy

716

Roll-over protection structures (ROPS) (section B4 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Falling-object protective structures (FOPS) (section B5 of annex IV)

NEMKO ALFLAB S.P.A. Via Trento e Trieste 116/118 20046 BIASSONO - MILANO Italy

717

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

GAMBA WORKING GROUP di Gamba Davide Piazza Savoia 4 10122 Torino Italy

718

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Roll-over protection structures (ROPS) (section B4 of annex IV)

Falling-object protective structures (FOPS) (section B5 of annex IV)

ITEVELESA - INSPECCIÓN TÉCNICA DE VEHÍCULOS LEONESA S.A. C/ Gobelas, 47-49 28023 MADRID Spain

719

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

CESI (CENTRO ELETROTECNICO SPERIMENTALE ITALIANO) GIACINTO MOTTA SPA Via Rubattino, 54 20134 MILANO Italy

722

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

NOVICON SAS DI R. CASTELLI & C. Via della Fontana 23804 MONTE MARENZO Italy

723

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

ABS EUROP LTD ABS House

1 Frying Pan Alley

E1 7HR LONDON United Kingdom

729

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Automatic movable screens to protect the presses referred to in 9, 10 and 11 (section B3 of annex IV)

CERTICONTROL S.A. C/ Manresa 1, 8oA 30004 MURCIA Spain

730

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

FACHAUSSCHUSS "DRUCK UND PAPIERVERARBEITUNG"

Prüf und Zertifizierungsstelle im BGPRÜFZERT

Rheinstraße 6-8 65173 WIESBADEN Germany

739

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

FACHAUSSCHUSS "VERWALTUNG"

Prüf- und Zertifizierungsstelle im BGPRÜFZERT

Deelbögenkamp 4 22281 HAMBURG Germany

740

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

FACHAUSSCHÜSSE "EISEN UND METAL II UND OBERFLÄCHENBEHANDLUNG"

Prüf- und Zertifizierungsstelle im BGPRÜFZERT

Hans-Böckler-Allee 25 30173 HANNOVER Germany

741

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

FACHAUSSCHUSS "LEDER"

Prüf- und Zertifizierungsstelle im BGPRÜFZERT

Lortzingstraße 2 55127 MAINZ Germany

742

Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)

DANMARKS JORDBRUGSFORSKNING

Forskningscenter Bygholm

Postboks 536 8700 HORSENS Denmark

802

Portable chain saws for woodworking (section A8 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Roll-over protection structures (ROPS) (section B4 of annex IV)

Fallings-object protective structures (FOPS) (section B5 of annex IV)

INGENIERIA Y TECNICAS DE CALIDAD S.L. Polg Aurrera - Manzana 1, n° 63- 1a planta 48510 TRAPAGARAN Spain

844

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

ISTITUTO SERVIZI EUROPEI TECNOLOGICI SRL Via Ciro Menotti 10 41033 CONCORDIA (MO) Italy

865

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

TÜV THÜRINGEN ANLAGENTECHNIK GMBH - ZERTIFIZIERUNGSSTELLE FÜR GERÄTESICHERHEIT Melchendorfer Straße 64 99096 ERFURT Germany

867

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Vehicles servicing lifts (section A15 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

LAIDLER CERTIFICATION - MR PAUL LAIDLER Belaisis Business Centre - Billingham TS23 4 EA Teesside United Kingdom

870

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

APAVE NORD-OUEST 51, avenue Architecte Cordonnier BP247 59019 Lille cedex France

877

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Vehicles servicing lifts (section A15 of annex IV)

MOTOR INDUSTRY RESEARCH ASSOCIATION (MIRA) Watling Street CV10 0TU Nuneaton United Kingdom

888

Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B1 of annex IV)

Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV)

Roll-over protection structures (ROPS) (section B4 of annex IV)

Falling-object protective structures (FOPS) (section B5 of annex IV)

ITS TESTING & CERTIFICATION GMBH Heilbronner Strasse, 5 70771 LEINFELDEN-ECHTERDINGEN Germany

905

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Portable chain saws for woodworking (section A8 of annex IV)

Vehicles servicing lifts (section A15 of annex IV) Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)

CCQS (UK) LIMITED Southern House, Guildford Road GU22 7UY WOKING United Kingdom

1105

Circular saws (single- or multiblade) for working with wood and analogous materials or for working with meat and analogous materials: (section A1 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed

- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage

- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading

- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading

Hand-fed surface planing machines for woodworking (section A2 of annex IV)

Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)

Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)

Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)

Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)

Portable chain saws for woodworking (section A8 of annex IV)

EUROPEAN INSPECTION AND CERTIFICATION COMPANY SA - EUROCERT SA Tatoiou 73 & Char. Trikoupi 14564 ATHENS Greece

1128

For all products listed in annex IV Receipt of technical file

Certification of adequacy for the technical file

EC Type-examination

Annex VI Article 8, 2(c), 1st indent

Annex VI Article 8, 2(c), 2nd indent

Annex VI Article 8, 2(b) and 2c, 3rd indent

CHAPTER 2

PERSONAL PROTECTIVE EQUIPMENT

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 89/686/EEC PERSONAL PROTECTIVE EQUIPMENT

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

AFNOR CERTIFICATION SA 11, avenue Francis de Pressensé 93571 SAINT-DENIS LA PLAINE CEDEX France

All PPE referred to in Article 8 (4) System for ensuring EC quality of production by means of monitoring

Article 11B

NATIONAL STANDARDS AUTHORITY OF IRELAND (NSAI) Glasnevin 9 DUBLIN Ireland

All personal protective equipment EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

ISTITUTO ITALIANO DEL MARCHIO DI QUALITÀ (IMQ S.P.A.) Via Quintiliano, 43 20138 MILANO Italy

All categories of personal protective equipment to protect against electrical risks

EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

INSTITUTO PORTUGUÊS DA QUALIDADE Rua António Gião, 2 2829-513 CAPARICA Portugal

Equipment to protect feet and legs and to prevent skidding EC Type-examination

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11B

ISTITUTO DI CERTIFICAZIONE EUROPEO PRODOTTI INDUSTRIALI S.R.L. Via Emilia Parmense, 11 A 29010 PONTENURE (PC) Italy

Hearing protection: EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

- earmuffs

- earplugs

Protection against falls from a height:

- descenders

- guided rigid anchorage arresters

- ropes/cords

- energy absorbers

- personal protective equipment for positioning on the job and the prevention of falls from a height. Work positioning systems

- retractable fall prevention equipment

- body harnesses

- connectors

- fall arrest systems

Electrical hazards:

- conductive clothing

- gloves and mittens of insulating material

- muffs of insulating material

- adjustable rods for live working EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

ISTITUTO DI RICERCHE E COLLAUDI

M. MASINI SRL

Via Moscova 11 20017 RHO Italy

Special work helmets with high lateral rigidity EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Industrial protective gloves for mechanical uses

Leather five-finger working gloves

Protective gloves against chemical products and micro-organisms

Protective gloves against thermal hazards (heat and fire)

Protective industrial gloves against chemical attack

Lowering devices

Stopping devices, guided on a rigid anchoring line

Stopping devices, guided on a flexible anchoring line

Ropes

Energy absorbers

Work positioning systems

Retaining systems

Retractable catching systems

Body harnesses

Connectors

Anchoring devices

Positioning harnesses and associated equipment

Special non-conductive work helmets

Gas and combined filters

Dust filters

AX gas and combined filters against organic compounds with low boiling point

SX gas and combined filters against compounds specifically named

Emergency filters

Emergency respirators - filters hoods for protection in the event of fire

Headgear to protect against injuries to the skull

Industrial protective helmets

Work helmets

Special non-flammable work helmets EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

UNION TECHNIQUE DE L'AUTOMOBILE, DU MOTOCYCLE ET DU CYCLE Autodrome de Linas-Montlhéry - B.P.212 91311 Montlhéry Cedex France

All personal protective equipment for the following purposes: EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Head protection

INSTITUT NATIONAL DE RECHERCHE ET DE SÉCURITÉ B.P. 27 54501 Vandoeuvre Cedex France

Protective equipment for eyes and face EC Type-examination Article 10

Respiratory protective equipment EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

Hearing protection equipment EC Type-examination Article 10

LABORATOIRE NATIONAL D'ESSAIS (LNE) 1, rue Gaston Boissier 75724 PARIS CEDEX 15 France

Fall arrest equipment EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

Personal protective equipment intended to prevent drowning and buoyancy aids

EC Type-examination Article 10

Personal protective equipment intended to protect the hand and arm against knife blows

Personal protective equipment intended to protect the hand and arm against ionizing radiation

EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

All PPE referred to in Article 8 (4) System for ensuring EC quality of production by means of monitoring

Article 11B

Clothing providing protection against knife wounds EC Type-examination Article 10

Clothing to protect against ionizing radiation EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

Eye protection equipment against laser beams EC Type-examination Article 10

INSTITUT FRANÇAIS DU TEXTILE ET DE L'HABILLEMENT Avenue Guy de Collongue 69134 ÉCULLY CEDEX France

Personal protective equipment for sports or leisure activities: EC Type-examination Article 10

- Gum shields

- Chest protectors and groin protectors

- Masks and visors for face protection

Protective clothing EC Type-examination Article 10

Personal protective equipment intended to protect the hand and arm

INSTITUT DE PROTECTION ET DE SÛRETÉ NUCLÉAIRE (CENTRE TECHNIQUE D'HOMOLOGATION DES ÉQUIPEMENTS NUCLÉAIRES) B.P. 6 92265 Fontenay-Aux-Roses Cedex France

Clothing to protect against ionizing radiation EC Type-examination Article 10

Apparatus to protect the respiratory tract with a specific gas filter or with a combined gas and particle filter with or without assisted ventilation

Personal protective equipment intended to protect the hand and arm against ionizing radiation

CENTRE EXPÉRIMENTAL DE RECHERCHES ET D'ÉTUDES DU BÂTIMENT ET DES TRAVAUX PUBLICS Domaine de Saint-Paul, B.P. 37 78470 Saint-Rémy-les-Chevreuses France

High visibility clothing EC Type-examination Article 10

CENTRE TECHNIQUE DU CUIR ET DE LA MAROQUINERIE Parc Sc. T. Garn. - 4, rue Herm. Frankel 69367 Lyon Cedex 07 France

Personal protective equipment intended to protect the hand and arm EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

All equipment to protect feet and legs

LABORATOIRE DE RECHERCHE ET DE CONTRÔLE DES CAOUTCHOUCS ET DES PLASTIQUES Rue Auber, 60 94408 Vitry-sur-Seine Cedex France

Personal protective equipment intended to protect the hand and arm against chemical and biological risks

EC Type-examination Article 10

APAVE PARISIENNE 97-103 boulevard Victor Hugo 93400 SAINT OUEN France

All categories of personal protective equipment to protect against electrical risks

EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

INSTITUT NATIONAL DE LA PLONGÉE PROFESSIONNELLE Entrée 3 - Port de la Pointe Rouge 13008 MARSEILLE France

Personal protective equipment for use in diving or hyperbaric conditions

EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

LABORATOIRE CENTRAL DES INDUSTRIES ÉLECTRIQUES Avenue du Général Leclerc, 33 92266 FONTENAY-AUX-ROSES France

All categories of personal protective equipment to protect against electrical risks

EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

APAVE LYONNAISE B.P. 3 69811 TASSIN France

Personal protective equipment to protect against falls from a height. EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

DÉLÉGATION GÉNÉRALE POUR L'ARMEMENT Centre Aéroporté de Toulouse, BP 3023 31024 Toulouse Cedex France

Personal protective equipment to protect against falls from a height. EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

BSI 389 Chiswick High Road W4 4AL LONDON United Kingdom

Protective clothing (including lifejackets and buoyancy aids) EC Type-examination Article 10

Fall arrest equipment

Equipment mentioned above referred to in Article 8 (4) EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 11A

Article 11B

All equipment to protect feet and legs EC Type-examination Article 10

Head protection equipment

Eye protection equipment

Respiratory protective equipment

Hearing protection equipment

LLOYD'S REGISTER QUALITY ASSURANCE (LRQA) LTD

EUROPEAN DIRECTIVE SERVICES

Middlemarch Office Village - Siskin Driv CV3 4FJ Hiramford - Coventry United Kingdom

Following equipment referred to in Article 8 (4): System for ensuring EC quality of production by means of monitoring

Article 11B

- Head protection

- Eye and face protection

- Respiratory protection

- Hand and arm protection

- Trunk and abdomen protection

- Whole body protection

GERMANISCHER LLOYD AG, HAUPTVERWALTUNG Vorsetzen, 32 20459 HAMBURG Germany

Personal protective equipment for EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

- underwater use

- to prevent drowning

- to save people from water

- for sailing and surfing

ASOCIACIÓN ESPAÑOLA DE NORMALIZACIÓN Y CERTIFICACIÓN (AENOR) C/ Génova, 6 E-28004 MADRID Spain

All PPE referred to in Article 8 (4) EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 11A

Article 11B

PHYSIKALISCH-TECHNISCHE BUNDESANSTALT - (PTB) Bundesallee, 100 38116 BRAUNSCHWEIG Germany

102

Eye protectors EC Type-examination Article 10

Eye protectors (referred to in Article 8 (4)) EC quality control system for the final product Article 11A

Hearing protection equipment EC Type-examination Article 10

SGS UNITED KINGDOM LIMITED Worle Park, Weston-Super-Mare BS22 OWA SOMERSET United Kingdom

120

All personal protective equipment EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

BERUFSGENOSSENSCHAFTLICHES INSTITUT FÜR ARBEITSSICHERHEIT Alte Heerstraße, 111 53754 SANKT AUGUSTIN Germany

121

Personal protective equipment to protect against falls from a height. EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Respiratory protection devices - diving suits

Hearing protection equipment

Foot and leg protective equipment providing protection from heat, cold and mechanical action

Equipment for protecting all or part of the face from heat, cold and mechanical action

Hand and arm protective equipment providing protection from heat, cold, chemical, biological and mechanical action

Head protective equipment providing protection from heat and mechanical action

Protective clothing providing protection from heat, cold, climatic influences, chemical and mechanical action, static electricity, highfrequency electro-magnetic radiation and radioactive contamination

High visibility warning clothing EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

TÜV PRODUCT SERVICE GMBH Ridlerstraße, 65 80339 MÜNCHEN Germany

123

A. Personal protective equipment for winter sports EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

- Safety bindings for skis and snowboards with arresting devices

- Ski sticks

- Protective shoes for winter sports

- Personal protective equipment to be used where there is a danger of avalanches

EC Type-examination Article 10

B. Personal protective equipment for mountaineering

- Protective shoes for climbing

- Personal protective equipment for special use in ice

- Anchorages and connectors for climbing

- Ropes

- Straps

- Slings

- Guy ropes

- Harnesses

- Rope clamps

- Personal protective equipment for bivouacking

C. Personal protective equipment for water sports

- Wetsuits to protect against cold

- Personal protective equipment with solid filling to prevent drowning

- Swimming aids

- Surf trapeze

D. Personal protective equipment for individual parts of the body

- Protectors

E. Protective helmets for sports

F. Sports shoes with a protective function (where not specified in Sections A and B)

Clothing to protect against ionizing radiation EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Personal protective equipment to protect against falls from a height.

Protective gloves providing protection from mechanical (except piercing), chemical and microbial action

LGA - LANDESGEWERBEANSTALT BAYERN Tillystraße, 2 90431 Nürnberg Germany

125

Personal protective equipment intended to prevent drowning and buoyancy aids

EC Type-examination Article 10

DEUTSCHE MONTAN TECHNOLOGIE GMBH Am Technologiepark, 1 45307 ESSEN Germany

158

Protective suits for spraying works EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Protective suits for works with chemicals

Safety and rescue harnesses

Protective industrial helmets

Respiratory devices

Air-supplied suits, helmets-mask combinations

Scuba equipment

Respiratory devices for spraying works

Personal protective equipment to protect against falls from a height.

Head protection equipment

CENTRO NACIONAL DE MEDIOS DE PROTECCIÓN

INSTITUTO NACIONAL DE SEGURIDAD E HIGIENE

Autopista de San Pablo S/N 41007 SEVILLA Spain

159

All personal protective equipment for professional use, except equipment to protect against ionizing radiation and to prevent drowning

EC Type-examination Article 10

Equipment mentioned above referred to in Article 8 (4) EC quality control system for the final product Article 11A

INSTITUO ESPAÑOL DEL CALZADO Y CONEXAS, ASOCIACIÓN DE INVESTIGACIÓN Poligono Ind. C. Alto - Apart. Correos 253 03600 Elda (Alicante) Spain

160

Personal protective equipment for legs and feet, for professional use, providing protection against mechanical impact and physical action

EC Type-examination Article 10

ASOCIACIÓN DE INVESTIGACIÓN DE LA INDUSTRIA TEXTIL Plaza Emilio Sala 1 3800 ALCOY Spain

161

Protective clothing EC Type-examination Article 10

Personal protective equipment for protecting the upper extremities from aggressive external agents in general

LABORATORIO DE ENSAYOS E INVESTIGACIONES TEXTILES DEL ACONDICIONAMIENTO TARRASENSE Passeig 22 de Julio 218 - Apt Correos 36 08221 TARRASA Spain

162

Protective clothing EC Type-examination Article 10

Personal protective equipment for protecting the upper extremities from aggressive external agents in general

LABORATORIO OFICIAL JOSÉ MARÍA DE MADARIAGA Calle Alenza, 2 28003 MADRID Spain

163

Mining sector, in particular personal protective equipment to protect the respiratory tract from dangerous substances, as well as antistatic personal protective equipment for legs and feet in explosive atmosphere

EC Type-examination Article 10

IDIADA AUTOMOTIVE TECHNOLOGY S.A. L'Albornar 43710 SANTA OLIVA Spain

164

Cycling helmets (for sport or professional use) EC Type-examination Article 10

Helmets for downhill skiers (for sport or professional use)

Helmets for small children (for sport or domestic use)

General protective clothing for motorcyclists (for sport or professional use)

PFI - PRÜF- UND FORSCHUNGSINSTITUT PIRMASENS E.V. Hans-Sachs Straße 2 66955 PIRMASENS Germany

193

Foot and leg protectors: EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Safety shoes, protective shoes and working shoes

INSPEC INTERNATIONAL LTD Upper Wingbury Courtyard - Wingrave HP22 4LW AYLESBURY United Kingdom

194

Filtering respiratory devices (excluding any intended to provide protection against radiotoxic gases)

EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Respiratory protection devices providing full insulation from the atmosphere (excluding those for use in diving)

Protective clothing for chainsaw operators EC Type-examination Article 10

Fall arrest equipment EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Equipment mentioned above referred to in Article 8 (4) EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 11A

Article 11B

Protective clothing EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

System for ensuring EC quality of production by means of monitoring

Article 11B

All equipment to protect feet and legs

Head protection equipment

Eye protection equipment

Respiratory protective equipment EC Type-examination Article 10

Hearing protection equipment EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Lifejackets

Personal buoyancy aids

DIN CERTCO GESELLSCHAFT FÜR KONFORMITÄTSBEWERTUNG MBH Burggrafenstraße 6 10787 BERLIN Germany

196

Eye protection equipment with or without face protection EC Type-examination Article 10

Eye protection equipment with or without face protection, referred to in Article 8 (4)

EC quality control system for the final product Article 11A

TÜV RHEINLAND PRODUCT SAFETY GMBH Am Grauen Stein 51105 Köln Germany

197

PPE providing protection from falling EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Personal protective equipment intended to prevent drowning and buoyancy aids

All equipment to protect feet and legs

Personal protective equipment intended to protect the hand and arm

Head protection equipment

Protective helmets

Protective clothing

Eye and face protection

FORCE INSTITUT, FORCE-DANTEST CERT Park Alle 345 2605 Brøndby Denmark

200

Equipment mentioned above referred to in Article 8 (4) EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 11A

Article 11B

Foot protection equipment EC Type-examination Article 10

Protective helmets

Fall arrest equipment

Respiratory protective equipment

Protective clothing and buoyancy aids

DEUTSCHE GESELLSCHAFT ZUR ZERTIFIZIERUNG VON MANAGEMENTSYSTEMEN MBH - QUALITÄTS- UND UMWELTGUTACHTER August-Schanz Straße, 21 60433 FRANKFURT AM-MAIN Germany

297

Following personal protective equipment referred to in Article 8 (4): System for ensuring EC quality of production by means of monitoring

Article 11B

- Respiratory devices

- Equipment against electrical hazards

Fall arrest equipment

- Abseiling equipment

- Safety and rescue harnesses

- Mountaineering equipment

Protective clothing

- Protective suits for work with chemicals

- Flame-proof clothing

- Low temperature clothing

- Suits for the application of plant protection products

- Heat-protective clothing

- Protective gloves and shoes against chemical and thermal hazards

Equipment mentioned above referred to in Article 8 (4)

FACHAUSSCHUSS PERSÖNLICHE SCHUTZAUSRÜSTUNGEN PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT Klinkerweg 4 40699 ERKRATH Germany

299

Abseiling equipment EC Type-examination Article 10

Safety and rescue harnesses

Gloves

Industrial helmets

Boots and shoes

Protective equipment to prevent drowning

Mountaineering equipment

Components for safety and rescue harnesses

Eye protection devices, protective glasses

Equipment mentioned above referred to in Article 8 (4) EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 11A

Article 11B

Protective clothing EC Type-examination Article 10

Respiratory protective equipment

Except where affording protection against: EC Type-examination Article 10

- ionizing radiation

- spurious arc lighting

- laser beams

AGENZIA NAZIONALE CERTIFICAZIONE COMPONENTI E PRODOTTI SRL Via Bronzino, 3 20133 MILANO Italy

302

Lowering devices EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Stopping devices, guided on a rigid anchoring line

Stopping devices, guided on a flexible anchoring line

Ropes

Energy absorbers

Work positioning systems

Retractable catching systems

Body harnesses

Goggles for professional and industrial use (radiation protection)

Filters for welding and ancillary techniques

Ultraviolet filters

Infra-red filters

Filters for welding with a transmission factor in the switchable visible and filters with double transmission factor in the visible

High-visibility signalling clothing

Protective clothing where there is a risk of entanglement in moving parts

Protective gloves for users of chainsaws

Protective clothing for the use of chainsaws (protection of feet); welding spats, leg protection

Protective filters and goggles against laser rays

Protective goggles for laser adjustment

Connectors

Catching systems

Retaining systems

Anchoring devices

Positioning harnesses and accessories

Protective clothing against external irradiation

EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Protective clothing against splashes of liquid metal

Protective clothing against liquid chemicals or aerosols

Protective clothing against chemicals

MERCHANDISE TESTING LABORATORIES (UK) LTD Oakhurst House - 57 Ashbourne Road DE22 3FS DERBY United Kingdom

319

Clothing, general protection: hand, arm, body EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

Gloves: abrasion, puncture, tear protection EC Type-examination Article 10

Equipment mentioned above referred to in Article 8 (4) EC quality control system for the final product Article 11A

High visibility protection EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

NATIONAL ENGINEERING LABORATORY East Kilbride G75 0QU GLASGOW United Kingdom

320

Fall arrest: industrial safety belts, self-locking anchorages, lines, safety belts, harnesses, safety lanyards

EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

SATRA TECHNOLOGY CENTRE Satra House - Rockingham Road NN16 9JH KETTERING United Kingdom

321

All types of safety, protective and occupational footwear and leg protectors.

EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Clothing for high visibility protection.

Protective clothing for chainsaw operators

Personal protective equipment for sports and leisure

Motor cycle clothing.

Protective clothing (including that against radioactive contamination, and against liquid and gaseous chemicals, including aerosols and solid particles).

Fall arrest equipment

Dry suits / diving suits.

Deck safety harness and safety line for use on recreational craft

Helmets for equestrian use EC Type-examination Article 10

Helmets for alpine skiers

Helmets for airborne sports

Protective helmets for pedal cyclists and for users of skateboards and skates

Climber's safety helmets EC Type-examination Article 10

Head protectors for ice hockey players (but not including full face protectors, eye protectors and teeth protectors)

Gloves and clothing to provide protection against: EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

- chemical hazards

- heat, flame and cold

- mechanical and cutting risks

Industrial scalp protectors EC Type-examination Article 10

Industrial safety helmets

Industrial bump caps

Protection skull caps for jockeys

Protective hats for horse and ponyriders

Helmets for canoeing and white water sports

Helmets for firefighters

ASSOCIATION FRANÇAISE POUR L'ASSURANCE QUALITÉ (AFAQ) Avenue Aristide Briand, 116 - B.P.40 92224 Bagneux Cedex France

333

All personal protective equipment System for ensuring EC quality of production by means of monitoring

Article 11B

ASSOCIATION POUR LA PROMOTION DE L'ASSURANCE QUALITÉ DANS LA FILIÈRE DU TEXTILE ET DE L'HABILLEMENT (ASQUAL) Rue des Reculettes, 14 75013 PARIS France

334

All personal protective equipment System for ensuring EC quality of production by means of monitoring

Article 11B

Protective clothing EC quality control system for the final product Article 11A

Personal protective equipment intended to protect the hand and arm

TNO CERTIFICATION B.V. Laan Westenenk 501, Postbus 541 7300 AM APELDOORN Netherlands

336

Protective clothing EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Equipment to protect feet and legs and to prevent skidding

Personal protective equipment intended to protect the hand and arm

Hearing protection equipment EC Type-examination Article 10

BRITISH TEXTILE TECHNOLOGY GROUP (BTTG) Wira House, West Park Ring Road LS16 6QL LEEDS United Kingdom

338

Protective clothing against chemical hazards EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

Protective clothing protecting against foul weather

Protective gloves against chemicals and micro-organisms

Protective clothing: high visibility warning

Limited use: protective clothing with spray-tight connections between different parts of the clothing (type 4)

Protective clothing:

Limited use: protective clothing with liquid-tight connections between different parts of the clothing (type 3)

BRITISH TEXTILE TECHNOLOGY GROUP - FIRE TECHNOLOGY SERVICES Unit 4B Stag Industrial Estate - Broadhe WA14 5DW Alchincham United Kingdom

339

Protective clothing, gloves protecting against heat and flame EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

FACHAUSSCHUSS "ELEKTROTECHNIK" PRÜF-UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT Gustav-Heinemann-Ufer 130 50968 Köln Germany

340

Eye protection devices and equipment: EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

- Protective eye glasses for electricians

- Laser-protection eye glasses

Protective devices for the eyes and eyesight:

- Protective helmets for electricians

- Protective screens and visors for electricians

Electrically insulated protective clothing:

- Sleeves

- Suits

- Gloves

- Means of protecting the body against live components

- Shoes

- Boots

- Overshoes

Personal alarms:

- Contact monitoring devices

- Personal alarm signalling devices

INTERTEK TESTING SERVICES (LEICESTER) LTD Centre Court - Meridian Business Park LE3 2WR LEICESTER United Kingdom

362

Safety, protective and occupational footwear EC Type-examination Article 10

Gloves and clothing to provide protection against:

- chemical hazards

- mechanical action

- heat and flame

DEUTSCHE PRÜFSTELLE FÜR LAND- UND FORSTTECHNIK Weissensteinstraße 70/72 34114 KASSEL Germany

363

Gloves and suits for the application of plant protection products EC Type-examination Article 10

Cut protection for power saw operators

Equipment mentioned above referred to in Article 8 (4) EC quality control system for the final product Article 11A

ELOT - HELLENIC ORGANIZATION FOR STANDARDIZATION Acharnon Street 313 11145 ATHENS Greece

365

Protective helmets EC Type-examination Article 10

Safety shoes for professional use

Gloves giving mechanical protection

VDE - VERBAND DER ELEKTROTECHNIK ELEKTRONIK INFORMATIONSTECHNIK E.V. - VDE PRÜF-UND ZERTIFIZIERUNGSSTELLE Merianstraße, 28 63069 OFFENBACH (AM MAIN) Germany

366

Personal protective equipment against electrical risks and for works under dangerous tension

EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Personal protective equipment used as insulation in high-tension work EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

LABORATORI GENERAL D'ASSAIGS I INVESTIGACIONS (LGAI) Campus UAB, Apto Correos 18 8193 BELLATERRA Spain

370

Personal protective equipment intended to prevent drowning and buoyancy aids

EC Type-examination Article 10

ORGANISMO DI CERTIFICAZIONE EUROPEA SRL Via Ancona, 21 00198 ROMA Italy

397

Personal protective equipment to protect against falls from a height.

EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Eye protection equipment

Protective gloves

Equipment providing total/partial face protection, including sports use EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Gloves protecting against chemical products and microorganisms

Hearing protection:

- earmuffs

- earplugs

Protection against falls from a height:

- descenders

- guided rigid anchorage arresters

- body harnesses

- connectors

- fall arrest systems

Electrical hazards:

- conductive clothing

- gloves and mittens of insulating material

- muffs of insulating material

- adjustable rods for live working

SP - SWEDISH NATIONAL TESTING AND RESEARCH INSTITUTE LTD Box 857 501 15 BORAS Sweden

402

Equipment for protection against falls from height and head protection EC Type-examination Article 10

High visibility warning clothing

Protective clothing - protection against heat and chemicals

Equipment for protection against falls from height and head protection, referred to in Article 8 (4)

Protective clothing - protection against heat and chemicals

EC quality control system for the final product Article 11A

All types of helmets System for ensuring EC quality of production by means of monitoring

Article 11B

Personal protective equipment against falls from height

Protective clothing - protection against heat and chemicals

Respiratory protection devices - diving suits

Protective clothing EC Type-examination Article 10

Head protection equipment

FINNISH INSTITUTE OF OCCUPATIONAL HEALTH (DEPARTMENT OF PHYSICS) Laajaniityntie 1 FIN - 01620 VANTAA Finland

403

Respiratory protective devices EC Type-examination Article 10

Protective clothing for users of hand held chainsaws

Safety, protective and occupational footwear

Buoyancy aids, lifejackets, armbands and lifesaving suits

Personal protective equipment to protect against falls from a height

Equipment to protect feet and legs and to prevent skidding

- Masks and visors for face protection

Protective clothing

Eye protection equipment

Hearing protection equipment

Protective helmets

Protective gloves

Equipment mentioned above referred to in Article 8 (4) EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 11A

Article 11B

SVENSK MASKINPROVNING AB - SMP Fyrisborgsgatan 3 754 50 UPPSALA Sweden

404

Clothing protection against cutting EC Type-examination Article 10

Boots for users of handheld chainsaws

Respiratory protective equipment EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

Hearing protection equipment EC Type-examination Article 10

TÜV-ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

All categories of equipment to prevent falls from a height, including accessories (for work and leisure, especially for mountaineering)

EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Clothing providing protection against mechanical impact

All equipment to protect feet and legs

SFS-SERTIFIOINTI OY Maistraatinportti 2 PL 116 00241 HELSINKI Finland

416

Industrial helmets EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 11A

Article 11B

Flotation equipment

Ear protectors

Protective equipment against cutting for forestry workers

Protective footwear, safety footwear and working footwear EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 11A

Article 11B

CONSORZIO ITALCERT Viale Sarca, 336 20126 MILANO Italy

426

Work positioning systems EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Retaining systems

Retractable catching systems

Body harnesses

Connectors

Positioning harnesses and associated equipment

Nipples for face pieces

Gas and combined filters

Dust filters (excluding those in the coal mining industry)

AX gas and combined filters

AX gas and combined filters against organic compounds with low boiling point

SX gas and combined filters against compounds specifically named

Complete nosepiece

Complete masks

Complete masks for special uses

Self-contained open-circuit compressed air breathing apparatus

Fresh air hose breathing apparatus

Airline respirators

Half and quarter masks

Valves for gas cylinders - nipples

Dust filter electrorespirators with helmets or hoods

Dust filter electrorespirators with full, half or quarter masks

Dust filtering facepieces

Self-contained open-circuit compressed air breathing apparatus for underwater use

Fresh air electrorespirators with hood

Airline respirators with hood

Airline respirators for use in sanding operations

Stopping devices, guided on a rigid anchoring line

Stopping devices, guided on a flexible anchoring line

Ropes

CONSORZIO ITALCERT Energy absorbers EC Type-examination

MATERIALPRÜFUNGSAMT NORDRHEIN-WESTFALEN (MPA NRW)

Marsbruchstraße 186 D - 44287 DORTMUND Germany

432

Eye protection devices, except against laser beams and welding EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

A.N.C.I. - SERVIZI S.R.L. - SEZIONE CIMAC (CENTRO ITALIANO MATERIALI APPLICAZIONE CALZATURIERA) Corso Bradolini, 19 27029 VIGEVANO Italy

465

Personal protective equipment of lower limb EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Industrial protective gloves for mechanical uses

Leather five-finger working gloves

Protective gloves for users of chainsaws

Gloves giving mechanical protection

Gloves protecting against cold ( >-50 °C)

Gloves protecting against cold (<= -50 °C)

Protective industrial gloves against chemical attack

Gloves protecting against chemical products and microorganisms

Gloves protecting against thermal hazards

Personal protective equipment against electrical risks and dangerous voltages or that used as insulation in high-tension work:

- gloves and mittens of insulating material

REGISTRO ITALIANO NAVALE Via Corsica 12 16128 GENOVA Italy

474

Complete nosepieces EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Full masks

Full masks for special use

Self-contained closed-circuit oxygen breathing apparatus EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Self-contained closed-circuit oxygen breathing apparatus for special use

Rescue jackets and coats

Self-contained open-circuit compressed air breathing apparatus

Self-contained open-circuit compressed air breathing apparatus for underwater use

CERMET Via Aldo Moro, 22 40068 S. LAZZARO DI SAVENA Italy

476

All personal protective equipment System for ensuring EC quality of production by means of monitoring

Article 11B

RAPRA TECHNOLOGY LIMITED Shawbury - Shrewsbury SY4 4NR Shropshire United Kingdom

478

Protective gloves EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

Safety and protective footwear

DU PONT (UK) LIMITED - KEVLAR PLANT - GLOVES & FABRIC TESTING LABORATORY Maydown Works - PO Box 15 BT47 1TU LONDONDERRY United Kingdom

479

Protective gloves EC Type-examination Article 10

INSTITUT SCIENTIFIQUE DES SERVICES PUBLICS - SIÈGE DE COLFONTAINE Rue Grande, 60 7340 COLFONTAINE France

492

Protective breathing equipment, excluding diving equipment EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

WETENSCHAPPELIJK EN TECHNISCH CENTRUM VAN DE BELGISCHETEXTIELNIJVERHEID - DIVISIE GENT Technologiepark - Zwijnaarde, 7 9052 ZWIJNAARDE Belgium

493

Clothing and gloves for protection against dangerous substances (chemical products) and infectious agents

EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Protective clothing and gloves for use in potentially explosive atmospheres

Protective clothing which may be caught up during use

Clothing capable of signalling the user's presence visually

Clothing and gloves for protection against heat and fire

Clothing and gloves for protecting against cold and normal bad weather

Clothing and gloves for protection against physical injury EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

INDUSTRIAL ENGINEERING CONSULTANTS SRL Via Botticelli, 151 10154 Torino Italy

495

Hearing protection equipment EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

CONSORZIO DNV - MODULO UNO Via Paracelso 20, 20041 AGRATE BRIANZA Italy

496

Hearing protection: EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

- earmuffs

- earplugs

Protection against falls from a height:

- descenders

- guided rigid anchorage arresters

CENTRO SVILUPPO SETTORE IMPIEGO SPA (CSI) Via Lombardia, 20 20021 Bollate Italy

497

Helmets for skiers EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Work helmets

Helmets for cyclists

Special non-flammable work helmets

Special work helmets with high lateral rigidity

Special non-conductive work helmets

Safety helmets for motor racing

Helmets for mountaineering

Helmets for bobsleighing

Fireman's helmets

Headgear to protect against injuries to the skull

Helmets for skateboard and roller skates

Riding hats

Skullcaps for jockeys

Head protection

Protective clothing for all or part of the body

- gloves EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

- footwear for professional use

- textile products

RICOTEST Via Einaudi 6/8 37010 CASTELNUOVO DEL GARDA Italy

498

Protective footwear EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

Protective clothing for motorcyclists (excluding helmets and visors)

Industrial protective gloves

C.R.I.T.T. SPORTS ET LOISIRS Rue Albert-Einstein, Zone du Sanital 86100 CHATELLERAULT France

501

Personal protective equipment for sports or leisure activities: EC Type-examination Article 10

- Masks and visors for face protection

- protective helmets for sports use

- Gum shields

- Chest protectors and groin protectors

- life-buoys and life-jackets

- life-jackets designed for recreational sailing

ALLGEMEINE UNFALLVERSICHERUNGSANSTALT SICHERHEITSTECHNISCHE PRÜFSTELLE Adalbert Stifter Straße, 65 1200 Wien Austria

511

Safety shoes, protective shoes and working shoes EC Type-examination Article 10

Personal protective equipment to prevent falls from a height, including accessories (for work and leisure, especially equipment for mountaineering)

Equipment mentioned above referred to in Article 8 (4) EC quality control system for the final product Article 11A

Hearing protection equipment EC Type-examination Article 10

Protective helmets

ISOQAR LIMITED Metropolitan House - City Park Business M16 9HQ MANCHESTER United Kingdom

513

Protective gloves - leather and synthetic coated System for ensuring EC quality of production by means of monitoring

Article 11B

Protective clothing - disposable suits made from paper and plastic materials

Respiratory protection devices - diving suits

- Masks and visors for face protection System for ensuring EC quality of production by means of monitoring

Article 11B

FLEETWOOD TESTING LABORATORTY - BLACKPOOL & THE FYLDE COLLEGE

Fleetwood Nautical Campus - Broadwater FY7 8JY Fleetwood United Kingdom

514

Life jackets and buoyancy aids EC Type-examination Article 10

Protective clothing (survival suits) - constant wear suits and abandonment suits

FACHAUSSCHUSS TIEFBAU PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT Landsberger Straße 309 80687 MÜNCHEN Germany

515

Scuba equipment EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

SÄCHSISCHES TEXTILFORSCHUNGSINSTITUT E.V. Annaberger Straße, 240 9125 CHEMNITZ Germany

516

Following personal protective equipment: EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

- Weather protection clothing

- Low temperature clothing

- Dust-proof clothing

- Warning clothing

- Heat-protective clothing

- Flame-proof clothing

- Protective clothing for the fire service

- Chemical-proof clothing

- Protective gloves against chemical, mechanical, electrical and thermal hazards, with the exception of protective gloves reinforced with metal rings

Protective clothing against mechanical hazards EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Electrically insulated protective clothing

Equipment mentioned above referred to in Article 8 (4) System for ensuring EC quality of production by means of monitoring

Article 11B

Antistatic protective clothing EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

CERTOTTICA - SOCIETÀ CONSORTILE A.R.L. PER LA CERTIFICAZIONE DEI PRODOTTI OTTICI Via Fortogna, 1 32010 LONGARONE Italy

530

Protective goggles for laser adjustment EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

Protective filters and goggles against laser beams

Infra-red filters

Ultraviolet filters

Filters for welding and ancillary techniques

Glasses for occupational uses (glare, radiation, high-speed impact, for drivers)

Protective visors

Filters for welding

ÖSTERREICHISCHES TEXTILFORSCHUNGSINSTITUT Spengergasse 20 1050 Wien Austria

534

Protective clothing against: EC Type-examination Article 10

- mechanical action

- weather conditions

- heat, whether or not involving infrared radiation

- chemical action

- contamination with dangerous substances

Protective gloves against thermal risks

Same equipment where category III (Article 8 (4)) EC quality control system for the final product Article 11A

SOCIEDAD ESTATAL DE SALVAMENTO Y SEGURIDAD MARITIMACENTRO DE SEGURIDAD MARITIMA INTEGRAL 33393 Veranes Spain

540

Personal protective equipment intended to prevent drowning and buoyancy aids

EC Type-examination Article 10

FORSCHUNGSINSTITUT HOHENSTEINPROF. DR. JÜRGEN MECHEELS GMBH & CO.KG Schloß Hohenstein 74357 Bönnigheim Germany

555

Following items of personal protective equipment under Article 8 (2) (4) of the Directive:

EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

- Weather protection clothing

- Low temperature clothing

- Warning clothing

- Heat protective clothing

- Flame-proof clothing EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

- Protective clothing for the fire service

- Chemical-proof clothing

- Protective clothing against mechanical hazards

DRA BRIDGEWATER Bridgewater - Puriton TA7 8AD SOMERSET United Kingdom

557

Air filter systems for use with respiratory protective equipment EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

NATIONAL LEATHER CENTER Thisseos 7a - Kallithea 176 76 ATHENS Greece

619

High visibility clothing EC Type-examination

EC quality control system for the final product

Article 10

Article 11A

Protective gloves

Safety shoes for professional use

Gloves giving mechanical protection

Protective clothing for all or part of the body

- gloves

- footwear for professional use

- textile products

ASSOCIAZIONE CERTITEX Viale Sarca, 223 20123 MILANO Italy

621

Protective clothing for all or part of the body System for ensuring EC quality of production by means of monitoring

Article 11B

- gloves

- footwear for professional use

- textile products

SOCIETÀ ITALIANA CERTIFICAZIONE INDUSTRIALE S.r.l. Via Fiorini, 5 42100 REGGIO EMILIA Italy

623

All products covered by the Directive System for ensuring EC quality of production by means of monitoring

Article 11B

CENTRO TESSILE COTONIERO E ABBIGLIAMENTO SPA Piazza S. Anna, 2 21052 BUSTO ARSIZIO Italy

624

High-visibility clothing EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Protective clothing for use where there is a risk of being caught up in moving parts

Protective clothing, gloves and accessories against cold ( > -50 °C) EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Protective clothing, gloves and accessories against cold (<= -50 °C)

Protective clothing for firemen

Protective clothing, gloves and accessories for welding, etc.

Personal protective equipment intended to protect the hand and arm against chemical and biological risks

Personal protective equipment for sports or leisure activities:

- protective clothing

- gloves

Antistatic protective clothing

Protective clothing, gloves and accessories for workers exposed to heat

Gloves protecting against mechanical hazards

AFAQ-ASCERT INTERNATIONAL B.P.83 - 116 avenue Aristide Briand 92225 Bagneux Cedex France

639

All personal protective equipment System for ensuring EC quality of production by means of monitoring

Article 11B

LABORATORIO PROVE TECNOLOGICHE SNC Via G. Urbino, 62/A 26013 Crema Italy

721

Fall arrest equipment EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

LABORATORIO PREVENZIONE INCENDI SRL Via della Quercia, 11 59100 PRATO Italy

987

Clothing protecting against heat and flames EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Protective clothing for firemen (except protective clothing, gloves and accessories for welding, etc.)

CENTRO TECNOLÓGICO DAS INDÚSTRIAS TÊXTIL E DO VESTUÁRIO DE PORTUGAL - CITEVE Rua Fernando Mesquita, 2785 (Q. da Maia) 4760-034 VILA NOVA DE FAMALICÃO Portugal

1074

Protective clothing EC Type-examination

EC quality control system for the final product

System for ensuring EC quality of production by means of monitoring

Article 10

Article 11A

Article 11B

Personal protective equipment intended to protect the hand and arm

CHAPTER 4

MEDICAL DEVICES

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 98/79/EC IN VITRO DIAGNOSTIC MEDICAL DEVICES

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

RWTÜV ANLAGENTECHNIK GMBH Langemarkstrasse, 20 45138 ESSEN Germany

The following device for self-diagnosis, including its related calibrators and control materials: device for the measurement of blood sugar

Full quality assurance system

Production quality assurance

Annex IV

Annex VII

Immunochemestry pregnancy test

EC declaration of conformity

Full quality assurance system

Production quality assurance

Annex III

Annex IV

Annex VII

LLOYD'S REGISTER QUALITY ASSURANCE (LRQA) LTD

EUROPEAN DIRECTIVE SERVICES

Middlemarch Office Village - Siskin Driv CV3 4FJ Hiramford - Coventry United Kingdom

Self test devices for urinalysis, endocrinology, general chemistry, general immunology and haematology

EC declaration of conformity

Full quality assurance system

Production quality assurance

Annex III

Annex IV

Annex VII

Reagents and reagent products, including related calibrators and control materials, for controlling the following blood groups: ABO system, Rhesus (C, c, D, E, e), anti-Kell

Full quality assurance system

Production quality assurance

Annex IV

Annex VII

Reagents and reagent products, including related calibrators and control materials, for the detection, confirmation and quantification in human specimens of markers of HIV infection (HIV 1 and 2), HTLV I and II, and hepatitis B, and C

Reagents and reagent products, including related calibrators and control materials, for determining the following blood groups: anti-Duffy and anti-Kidd

Reagents and reagent products, including related calibrators and control materials, for determining irregular anti-erythrocytic antibodies

Reagents and reagent products, including related calibrators and control materials, for the detection and quantification in human samples of the following congenital infections: rubella, toxoplasmosis

Reagents and reagent products, including related calibrators and control materials, for determining the following human infections: cytomegalovirus, chlamydia

Reagents and reagent products, including related calibrators and control materials, for determining the following HLA tissue groups: DR, A, B

The following device for self-diagnosis, including its related calibrators and control materials: device for the measurement of blood sugar

Reagents and reagent products, including related calibrators and control materials, for determining the following hereditary disease: phenylketonuria

Reagents and reagent products, including related calibrators and control materials, for determining the following tumoral marker: PSA

Production quality assurance Annex VII

TÜV PRODUCT SERVICE GMBH Ridlerstraße, 65 80339 MÜNCHEN Germany

123

Devices for self-testing

EC declaration of conformity

Full quality assurance system

Production quality assurance

Annex III

Annex IV

Annex VII

Products referred in Annex II, list A

Full quality assurance system

EC Type-examination

Production quality assurance

Annex IV

Annex V

Annex VII

Products referred in Annex II, list B

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex IV

Annex V

Annex VI

Annex VII

DEKRA CERTIFICATION SERVICES (DCS) GMBH Handwerkstraße 15 70565 STUTTGART Germany

124

Devices for self-testing

EC declaration of conformity

Full quality assurance system

Production quality assurance

Annex III

Annex IV

Annex VII

LGA - LANDESGEWERBEANSTALT BAYERN Tillystraße, 2 90431 Nürnberg Germany

125

Devices for self-testing

EC declaration of conformity

Full quality assurance system

Production quality assurance

Annex III

Annex IV

Annex VII

The following device for self-diagnosis, including its related calibrators and control materials: device for the measurement of blood sugar

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex IV

Annex V

Annex VI

Annex VII

TÜV RHEINLAND PRODUCT SAFETY GMBH Am Grauen Stein 51105 Köln Germany

197

Devices for self-testing

EC declaration of conformity

Full quality assurance system

Production quality assurance

Annex III

Annex IV

Annex VII

Products referred in Annex II, list A

Full quality assurance system

EC Type-examination

Production quality assurance

Annex IV

Annex V

Annex VII

Products referred in Annex II, list B

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex IV

Annex V

Annex VI

Annex VII

TNO CERTIFICATION B.V. Laan Westenenk 501, Postbus 541 7300 AM APELDOORN Netherlands

336

In vitro diagnostic medical devices

EC declaration of conformity

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex III

Annex IV

Annex V

Annex VI

Annex VII

KEMA QUALITY B.V. Utrechtseweg 310 ( Postbus 9035 ) 6800 ET ARNHEM Netherlands

344

All devices referred in Annex II

Full quality assurance system

Production quality assurance

Annex IV

Annex VII

All devices for self-testing

EC declaration of conformity

Full quality assurance system

Production quality assurance

Annex III

Annex IV

Annex VII

TÜV-ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

Devices for self-testing

EC declaration of conformity

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Products referred in Annex II, list A

Full quality assurance system Annex IV

EC Type-examination

Production quality assurance

Annex V

Annex VII

Products referred in Annex II, list B

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex IV

Annex V

Annex VI

Annex VII

G-MED GROUPEMENT POUR L'ÉVALUATION DES DISPOSITIFS MÉDICAUX 33, avenue du Général Leclerc BP n° 8 92260 FONTENAY-AUX-ROSES France

459

In vitro diagnostic medical devices

EC declaration of conformity

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex III

Annex IV

Annex V

Annex VI

Annex VII

AMTAC CERTIFICATION SERVICES LTD Norman Road - Broadheath WA14 4EP ALTRINCHAM United Kingdom

473

All self-test devices which have existing notified body (NB) certification via their original manufacturer

EC declaration of conformity

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex III

Annex IV

Annex V

Annex VI

Annex VII

All Annex II list A devices which have existing notified body (NB) certification via their original manufacturer

All Annex II list B devices which have existing notified body (NB) certification via their original manufacturer

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex IV

Annex V

Annex VI

Annex VII

MDC MEDICAL DEVICE CERTIFICATION GMBH Heilbronner Strasse 43 70191 STUTTGART Germany

483

Devices for self-testing

EC declaration of conformity

Full quality assurance system

Production quality assurance

Annex III

Annex IV

Annex VII

Full quality assurance system

Production quality assurance

Annex IV

Annex VII

Reagents and reagent products, including related calibrators and control materials, for determining the following human infections: cytomegalovirus, chlamydia

Reagents and reagent products, including related calibrators and control materials, for determining the following tumoral marker: PSA

The following device for self-diagnosis, including its related calibrators and control materials: device for the measurement of blood sugar

EUROCAT - INSTITUTE FOR CERTIFICATION AND TESTING GMBH Wittichstrasse, 2 64295 DARMSTADT Germany

535

Devices for self-testing

Full quality assurance system

Production quality assurance

Annex IV

Annex VII

The following device for self-diagnosis, including its related calibrators and control materials: device for the measurement of blood sugar

VTT INDUSTRIAL SYSTEMS (VTT TUOTTEET JA TUOTANTO) P.O. Box 13001 33101 Tampere Finland

537

Reagents and reagent products, including related calibrators and control materials, for controlling the following blood groups: ABO system, Rhesus (C, c, D, E, e), anti-Kell

Reagents and reagent products, including related calibrators and control materials, for determining the following blood groups: anti-Duffy and anti-Kidd

Reagents and reagent products, including related calibrators and control materials, for determining irregular anti-erythrocytic antibodies

Reagents and reagent products, including related calibrators and control materials, for determining the following hereditary disease: phenylketonuria

Reagents and reagent products, including related calibrators and control materials, for determining the following human infections: cytomegalovirus, chlamydia

Reagents and reagent products, including related calibrators and control materials, for determining the following HLA tissue groups: DR, A, B

Reagents and reagent products, including related calibrators and control materials, for determining the following tumoral marker: PSA

The following device for self-diagnosis, including its related calibrators and control materials: device for the measurement of blood sugar

Full quality assurance system Annex IV

Self diagnosis devices for determining pregnancy and ovulation

EC declaration of conformity

Full quality assurance system

Annex III

Annex IV

DANSK GODKENDELSE AF MEDICINSK UDSTYR (DGM) Kollegievej, 6 2920 CHARLOTTENLUND Denmark

543

Full quality assurance system

EC Type-examination

Production quality assurance

Annex IV

Annex V

Annex VII

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex IV

Annex V

Annex VI

Annex VII

Reagents and reagent products, including related calibrators and control materials, for determining the following human infections: cytomegalovirus

Reagents and reagent products, including related calibrators and control materials, for determining the following tumoral marker: PSA

UL INTERNATIONAL (UK) LTD Wonersh House Building C, Old Portsm. R. GU3 1LR GUILDFORD United Kingdom

843

All self-test devices which have existing notified body (NB) certification via their original manufacturer

EC declaration of conformity Annex III

Self diagnosis devices for determining pregnancy and ovulation

EC declaration of conformity Annex III

Self diagnosis devices for determining cholesterol

Full quality assurance system Annex IV

Devices for the determination of toxoplasmosis, rubella, cytomegalovirus and chlamydia

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex IV

Annex V

Annex VI

Annex VII

Anti-duffy, anti-kidd, irregular anti-erythrocytic antibodies (list B) ABO system, rhesus (C, c, D, E, e) anti-Kell (list A) HIV 1 and 2, HTLV I and II, and hepatitis B, C and D (list A)

All Annex II and all self-test devices which have existing notified body

(NB) certification via their original manufacturer

Full quality assurance system

EC Type-examination

Production quality assurance

Annex IV

Annex V

Annex VII

Devices for the determination of PSA

The following device for self-diagnosis, including its related calibrators and control materials: device for the measurement of blood sugar

Full quality assurance system Annex IV

All Annex II list B and all self-test devices which have existing notified body (NB) certification via their original manufacturer

EC verification Annex VI

LABORATÓRIO DE ENSAIOS E METROLOGIA DA SAÚDE - LEMES Av. Padre Cruz, Complexo Inst. Ricardo J 1699 Lisboa Codex Portugal

932

In vitro diagnostic medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Annex IV

Annex V

Annex VI

Annex VII

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 90/385/EEC ACTIVE IMPLANTABLE MEDICAL DEVICES

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

NATIONAL STANDARDS AUTHORITY OF IRELAND (NSAI) Glasnevin 9 DUBLIN Ireland

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 5

BSI 389 Chiswick High Road W4 4AL LONDON United Kingdom

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 5

TÜV PRODUCT SERVICE GMBH Ridlerstraße, 65 80339 MÜNCHEN Germany

123

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC verification

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 4

Annex 5

LGA - LANDESGEWERBEANSTALT BAYERN Tillystraße, 2 90431 Nürnberg Germany

125

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC verification

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 4

Annex 5

TÜV RHEINLAND PRODUCT SAFETY GMBH Am Grauen Stein 51105 Köln Germany

197

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC verification

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 4

Annex 5

DEUTSCHE GESELLSCHAFT ZUR ZERTIFIZIERUNG VON MANAGEMENTSYSTEMEN MBH - QUALITÄTS- UND UMWELTGUTACHTER August-Schanz Straße, 21 60433 FRANKFURT-AM-MAIN Germany

297

Active implantable medical devices (pacemakers, biostimulators, nerve stimulators, muscle stimulators, bladder stimulators, sphincter stimulators, diaphragm stimulator and ear stimulators)

EC declaration of conformity (complete quality assurance system)

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 5

TÜV ZERTIFIZIERUNGSGEMEINSCHAFT e. V.

TÜV CERT

Reuterstraße, 161 53113 BONN Germany

298

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 5

BUREAU VERITAS QUALITY INTERNATIONAL (BVQI) 2nd Floor, Tower Bridge Road, 224-226 SE1 2TX LONDON United Kingdom

301

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 5

DIRECCIÓN GENERAL DE FARMACIA Y PRODUCTOS SANITARIOS - MINISTERIO DE SANIDAD Y CONSUMO PO del Prado, 18-20 28014 MADRID Spain

318

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC verification

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 4

Annex 5

KEMA QUALITY B.V. Utrechtseweg 310 ( Postbus 9035 ) 6800 ET ARNHEM Netherlands

344

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 5

CENTRUM VOOR MEDISCHE TECHNOLOGIE VAN HET INSTITUUT VOOR VEROUDERINGS- EN VAATZIEKTEN ONDERZOEK TNO Zernikedreef, 9 2333 CK LEIDEN Netherlands

345

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC verification

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 4

Annex 5

ISTITUTO SUPERIORE DI SANITA Viale Regina Elena, 299 00161 ROMA Italy

373

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC verification

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 4

Annex 5

TÜV-ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC verification

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 4

Annex 5

G-MED GROUPEMENT POUR L'ÉVALUATION DES DISPOSITIFS MÉDICAUX 33, avenue du Général Leclerc BP no 8 92260 FONTENAY-AUX-ROSES France

459

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC verification

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 4

Annex 5

MEDCERT ZERTIFIZIERUNGS- UND PRÜFUNGSGESELLSCHAFT FÜR DIE MEDIZIN GMBH Vorsetzen 32 20459 HAMBURG Germany

482

Active implantable medicinal devices and their accessories

EC declaration of conformity (complete quality assurance system)

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 5

PRUEFANSTALT FÜR MEDIZINISCHE GERÄTETECHNISCHE UNIVERSITÄT GRAZ Inffeldgasse, 18 8010 GRAZ Austria

636

Active implantable medicinal devices and their accessories

EC Type-examination

EC verification

Annex 3

Annex 4

LABORATÓRIO DE ENSAIOS E METROLOGIA DA SAÚDE - LEMES Av. Padre Cruz, Complexo Inst. Ricardo J 1699 Lisboa Codex Portugal

932

All active implantable medical devices

EC declaration of conformity (complete quality assurance system)

EC Type-examination

EC verification

EC declaration of conformity to type (assurance of production quality)

Annex 2

Annex 3

Annex 4

Annex 5

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 93/42/EEC MEDICAL DEVICES

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

APRAGAZ A.S.B.L. Chaussée de Vilvorde 156 1120 BRUXELLES Belgium

Class IIa non-invasive devices for gas storage, distribution or administration

Full quality assurance system

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex IV

Annex V

Annex VI

Class IIb active devices for administering gas and/or extracting medicines/substances

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

TÜV NORD CERT GMBH & CO. KG Am TÜV 1 30519 HANNOVER Germany

Active medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

TÜV ANLAGENTECHNIK GMBH UNTERNEHMENSGRUPPE TÜV

RHEINLAND/BERLIN-BRANDENBURG

Am Grauen Stein D-51105 Köln Germany

Active medical devices:

EC Type-examination

EC verification

Annex III

Annex IV

- equipment for infusions

- anaesthesia devices, respirators and oxygen therapy equipment

- vital-parameter monitoring and plotting devices

- surgical equipment and ancillary surgical equipment

- stimulation devices

- ophtalmological devices

- dental equipment

- prostheses and rehabilitation devices

- disinfection and sterilization equipment

- radiotherapy equipment with non-ionizing radiation

- medical supply units

- patient storage and transport equipment

- imaging equipment:

- with ionizing radiation

- with non-ionizing radiation

RWTÜV ANLAGENTECHNIK GMBH Langemarkstrasse, 20 45138 ESSEN Germany

Non-active medical devices:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- orthopaedic implants

- soft tissue implants

- function implants

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- disposable medical devices

- anaesthetic, orthopaedic and rehabilitation products

- non-energized medical instrumentation

- reusable non-active medical instruments

- bandages and dressings

- suture material and clamps

- dental equipment and instruments

- dental materials

- dental implants

Active medical devices:

- devices to ascertain vital functions

- equipment for extracorporeal circuits, infusions and haemophoresis

- anaesthesia devices, incubators, respirators and oxygen therapy equipment

- surgical equipment and ancillary surgical equipment

- stimulation devices

- ophtalmological devices

- dental equipment

- prostheses and rehabilitation devices

- disinfection and sterilization equipment

- radiotherapy devices:

- with ionizing radiation and with non-ionizing radiation

- with non-ionizing radiation

- imaging equipment:

- with ionizing radiation

- with non-ionizing radiation

NATIONAL STANDARDS AUTHORITY OF IRELAND (NSAI) Glasnevin 9 DUBLIN Ireland

All medical devices

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

ISTITUTO ITALIANO DEL MARCHIO DI QUALITÀ (IMQ S.P.A.) Via Quintiliano, 43 20138 MILANO Italy

Eye examination equipment

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

Equipment for electrosurgery and accessories

Anaesthetics equipment, incubators, ventilators, oxygen therapy equipment and accessories

Equipment for extracorporeal circulation, infusion, transfusion, haemophoresis and accessories

Equipment for dialysis and accessories

Equipment for checking and recording vital functions and accessories

Cardiac and muscular stimulation equipment and accessories

Dental equipment and accessories

Ophtalmological equipment and accessories

Disinfection and sterilization equipment

Equipment for aerosol therapy and accessories

Clinical imaging equipment using ionizing radiation, non-ionizing radiation and ultrasound

Treatment equipment using ionizing radiation, non-ionizing radiation and ultrasound

Disposable syringes

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

Urethral catheters, catheters for heart surgery and for the central cirulatory system

Bags for parenteral and enteral nutrition and accessories

Contact lenses

Solutions for contact lenses

Auditory prostheses

ISTITUTO DI RICERCHE E COLLAUDI M. MASINI SRL Via Moscova 11 20017 RHO Italy

Equipment for aerosol therapy, humidification and nebulisation

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

Equipment for anaesthesia, assisted ventilation and support of vital functions

- surgical equipment and ancillary surgical equipment

Equipment for electrosurgery

Equipment for peritoneal dialysis and hemodialysis

- Equipment for endoscopy

Equipment for infusion, transfusion, extracorporeal circulation, plasmapheresis and blood collection

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

Equipment for the production, visualisation and processing of images using non-ionising radiation or ultrasound

Equipment for measuring and/or monitoring and/or recording and/or analysing physiological parameters and vital functions

Dental instruments (non sterile) equipment

Equipment for rehabilitation

Equipment for nerve, heart or muscle stimulation or electrotherapy

Equipment for treatment using non-ionising radiation or ultrasound

Incubators and equipment for neonatal pathology

Non-active devices for anaesthesia and assisted ventilation

Non-active devices for surgery and endoscopy

Non-active devices for measuring physiological parameters

BSI 389 Chiswick High Road W4 4AL LONDON United Kingdom

All medical devices

EC verification

Product quality assurance

Annex IV

Annex VI

All medical devices including medical devices incorporating human blood derivatives

Full quality assurance system

EC Type-examination

Production quality assurance

Annex II

Annex III

Annex V

LLOYD'S REGISTER QUALITY ASSURANCE (LRQA) LTD

EUROPEAN DIRECTIVE SERVICES

Middlemarch Office Village - Siskin Drive CV3 4FJ Hiramford - Coventry United Kingdom

All medical devices

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

BAYERISCHES LANDESAMT FÜR MASS UND GEWICHT Franz-Schrank Straße, 9 80638 MÜNCHEN Germany

104

Active medical devices: Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- measuring devices to determine body temperature

- tonometers

- non-invasive sphygmomanometers

- audiometers

- therapy dosimeters

- diagnostic dosimeters

LANDESAMT FÜR MESS- UND EICHWESEN DES LANDES BRANDENBURG Stahnsdorfer Damm, 81 14532 KLEINMACHNOW Germany

106

Electrical thermometers for clinical use

Non-invasive sphygmomanometers

EC verification Annex IV

LANDESAMT FÜR MESS- UND EICHWESEN THÜRINGEN Unterpörlitzer Straße, 2 98693 ILMENAU Germany

118

Active medical devices:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- measuring devices to determine body temperature

- tonometers

- non-invasive sphygmomanometers

- flow meters

- devices to monitor and determine vital signs

- imaging equipment:

- with non-ionizing radiation

- radiotherapy equipment with non-ionizing radiation

- stimulation devices

Medical weighing instruments

Non-active medical devices used for measurement:

- clinical mercury-in-glass, maximum reading thermometers

- medical syringes

- tonometers

- non-invasive sphygmomanometers

- devices to ascertain vital functions

- flow meters

SGS UNITED KINGDOM LIMITED Worle Park, Weston-Super-Mare BS22 OWA SOMERSET United Kingdom

120

All medical devices

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

Infusion / syringe pumps

EC Type-examination Annex III

General electro / mechanical equipment

- stimulation devices

EC verification Annex IV

- defibrillators EC Type-examination Annex III

- condoms and contraceptive pessaries EC Type-examination

EC verification

Annex III

Annex IV

Equipment and accessories for dialysis

EC Type-examination Annex III

- Electrocardiographs

Blood pressure measurement devices

Electrical thermometers for clinical use

EC verification Annex IV

TÜV PRODUCT SERVICE GMBH Ridlerstraße, 65 80339 MÜNCHEN Germany

123

Non-active medical devices:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- orthopaedic implants

- soft tissue implants

- function implants

- disposable medical devices

- anaesthetic, orthopaedic and rehabilitation products

- non-energized medical instrumentation

- reusable non-active medical instruments

- bandages and dressings

- suture material and clamps

- dental equipment and instruments

- dental materials

- dental implants

Active medical devices:

- devices to ascertain vital functions

- equipment for extracorporeal circuits, infusions and haemophoresis

- anaesthesia devices, incubators, respirators and oxygen therapy equipment

- surgical equipment and ancillary surgical equipment

- stimulation devices

- ophtalmological devices

- dental equipment

- prostheses and rehabilitation devices

- disinfection and sterilization equipment

- disinfectants and antiseptics

- radiotherapy devices:

- with ionizing radiation and with non-ionizing radiation

- with non-ionizing radiation

- imaging equipment:

- with ionizing radiation

- with non-ionizing radiation

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

DEKRA CERTIFICATION SERVICES (DCS) GMBH Handwerkstraße 15 70565 STUTTGART Germany

124

Non-active medical devices:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- orthopaedic implants

- soft-tissue implants

- function implants

- disposable medical devices

- anaesthetic, orthopaedic and rehabilitation products

- non-energized medical instrumentation

- reusable non-active medical instruments

- bandages and dressings

- suture material and clamps

- dental equipment and instruments

- dental materials

- dental implants

Active medical devices:

- devices to ascertain vital functions

- equipment for extracorporeal circuits, infusions and haemophoresis

- anaesthesia devices, incubators, respirators and oxygen therapy equipment

- surgical equipment and ancillary surgical equipment

- stimulation devices

- ophtalmological devices

- dental equipment

- prostheses and rehabilitation devices

- disinfection and sterilization equipment

- radiotherapy devices:

- with ionizing radiation and with non-ionizing radiation

- with non-ionizing radiation

- imaging equipment:

- with ionizing radiation

- with non-ionizing radiation

Full quality assurance system

EC Type-examination

EC verification

Annex II

Annex III

Annex IV

LGA - LANDESGEWERBEANSTALT BAYERN Tillystraße, 2 90431 Nürnberg Germany

125

Non-active medical devices:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- orthopaedic implants

- soft tissue implants

- funtion implants

- disposable medical devices

- anaethestic, orhtopaedic and rehabilitation products

- non-energized medical instrumentation

- reusable non-active medical instruments

- bandages and dressings

- suture material and clamps

- dental equipment and instruments

- dental implants

Active medical devices:

- devices to ascertain vital functions

- equipment for extracorporeal circuits, infusions and haemophoresis

- anaesthesia devices, incubators, respirators and oxygen therapy equipment

- surgical equipment and ancillary surgical equipment

- stimulation devices

- ophtalmological devices

- dental equipment

- prostheses and rehabilitation devices

- disinfection and sterilization equipment

- radiotherapy devices:

- with ionizing radiation and with non-ionizing radiation

- with non-ionizing radiation

- imaging equipment:

- with ionizing radiation

- with non-ionizing radiation

TÜV RHEINLAND PRODUCT SAFETY GMBH Am Grauen Stein 51105 Köln Germany

197

Active medical devices:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- devices to ascertain vital functions

- stimulation equipment

- anaesthesia devices, incubators, respirators and oxygen therapy equipment

- equipment for extracorporeal circuits, infusions and haemophoresis

- ophtalmological devices

- surgical equipment and ancillary surgical equipment

- dental equipment

- prostheses and rehabilitation devices

- disinfection and sterilization equipment

- radiotherapy devices:

- with non-ionizing radiation

- with ionizing radiation and with non-ionizing radiation

- imaging equipment:

- with ionizing radiation

- with non-ionizing radiation

Non-active medical devices:

- orthopaedic implants

- soft tissue implants

- function implants

- suture material and clamps

- anaesthetic, orthopaedic and rehabilitation devices

- non-energized medical instrumentation

- reusable non-active medical instruments

- bandages and dressings

- dental equipment and instruments

- dental materials

- dental implants

Full quality assurance system

EC Type-examination

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex V

Annex VI

DEUTSCHE GESELLSCHAFT ZUR ZERTIFIZIERUNG VON MANAGEMENTSYSTEMEN MBH - QUALITÄTS- UND UMWELTGUTACHTER August-Schanz Straße, 21 60433 FRANKFURT-AM-MAIN Germany

297

Non-active medical devices:

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

- soft tissue implants

- function implants

- disposable medical products

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

- anaesthetic, orthopaedic and rehabilitation devices

- orthopaedic implants

- non-energized medical instrumentation

- bandages and dressings

- reusable non-active medical instruments

- suture material and clamps

- dental equipment and instruments

- dental materials

- dental implants

Active medical devices:

- devices to ascertain vital functions

- equipment for extracorporeal circuits, infusions and haemophoresis excluding heart-lung machines

- anaesthesia devices, incubators, respirators and oxygen therapy equipment

- surgical equipment and ancillary surgical equipment

- stimulation devices

- ophtalmological devices

- dental equipment

- prostheses and rehabilitation devices

- disinfection and sterilization equipment

- radiotherapy equipment with non-ionizing radiation

- imaging equipment:

- with ionizing radiation

- with non-ionizing radiation

TÜV ZERTIFIZIERUNGSGEMEINSCHAFT e. V.

TÜV CERT

Reuterstraße, 161 53113 BONN Germany

298

Active medical devices:

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

- devices to ascertain vital functions

- equipment for extracorporeal circuits, infusions and haemoforesis

- anaesthesia devices, incubators, respirators and oxygen therapy equipment

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

- surgical equipment and ancillary surgical equipment

- stimulation devices

- ophtalmological devices

- dental equipment

- prostheses and rehabilitation devices

- disinfection and sterilization equipment

- radiotherapy devices:

- with ionizing radiation and with non-ionizing radiation

- with non-ionizing radiation

- imaging equipment:

- with ionizing radiation

- with non-ionizing radiation

DIRECCIÓN GENERAL DE FARMACIA Y PRODUCTOS SANITARIOS - MINISTERIO DE SANIDAD Y CONSUMO PO del Prado, 18-20 28014 MADRID Spain

318

All medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

TNO CERTIFICATION B.V. Laan Westenenk 501, Postbus 541 7300 AM APELDOORN Netherlands

336

All medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

KEMA QUALITY B.V. Utrechtseweg 310 ( Postbus 9035 ) 6800 ET ARNHEM Netherlands

344

All medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

ITS TESTING AND CERTIFICATION LTD ITS House, Cleeve Road KT22 7SB Leatherhead United Kingdom

359

Active medical devices but excluding:

EC Type-examination

EC verification

Annex III

Annex IV

- blood gas analysers (in vivo)

- anaesthesia machines

- lung ventilators

- respiratory therapy equipment

- breathing systems attachments and components

EC Type-examination

EC verification

Annex III

Annex IV

- extracoporeal blood treatment equipment

- electrosurgical equipment

- medical laser equipment

- defibrillators

- radiotherapy equipment

- radionuclide and magnetic resonance imaging

VDE - VERBAND DER ELEKTROTECHNIK ELEKTRONIK INFORMATIONSTECHNIK E. V. - VDE PRÜF- UND ZERTIFIZIERUNGSSTELLE Merianstraße, 28 63069 OFFENBACH (AM MAIN) Germany

366

Active medical devices, except:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- disinfection and sterilization equipment

ISTITUTO SUPERIORE DI SANITA Viale Regina Elena, 299 00161 ROMA Italy

373

All medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

ISTITUTO DI RICERCHE, PROVE E ANALISI SRL Via Artigiani, 63 25040 BIENNO Italy

398

Single-use products

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

Equipment for electrosurgery

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

Apparatus and accessories for muscle stimulation

Equipment and accessories for infusion, perfusion and transfusion

Equipment and accessories for diagnosis and treatment using ultrasound

Equipment and accessories for dialysis

Equipment and accessories for diagnostic imaging, using ionising and non-ionising radiation

Equipment and accessories for treatment using ionising and non-ionising radiation

- patient-monitoring equipment and equipment for recording vital functions

- disinfection and sterilization equipment

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

SP - SWEDISH NATIONAL TESTING AND RESEARCH INSTITUTE LTD Box 857 501 15 BORÅS Sweden

402

Non active devices specifically intended for recording of X-ray diagnostic images (Annex IX, 4.4. Rule 16)

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

Equipment for anaesthesia and intensive care

Bone anchored implants for dental and craniofacial reconstructions

Diagnostic X-ray equipment

Surgical instruments for single use

Electromedical diagnostic equipment

Dental devices

All Class I sterile devices

Class I devices with a measuring function

Production quality assurance

Product quality assurance

Annex V

Annex VI

TÜV-ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

Active medical devices (including their accessories)

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

Non-active medicinal devices (including accessories)

Bone nails, screws and plates (including accessories)

- Disposable products

- For preserving/conducting blood, other body fluids and tissue, liquids and gases

- For contraception

- Dressings

- Dental products excluding dental materials

- Cleaning, disinfecting and sterilizing devices

- Products for endoscopy and endoscopic surgery

- Non-implantable products for orthopaedics and rehabilitation

All Class I sterile devices Production quality assurance Annex V

SEMKO AB Torshamnsgatan, 43 164 22 KISTA Sweden

413

Active therapeutic devices

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

Active devices intended for diagnosis

Devices for the administration to or removal from the patient's body of medicines, body fluids or other substances

Full quality assurance system

Annex II

Re-usable devices

Disposables

Wound dressings

Passive implants

Dental devices

Functional implants

Devices with a measuring function

Sterile devices

Electrical devices intended to administer and/or remove medicines or

products, body liquids or other substances to or from the body

EC Type-examination

EC verification

Annex III

Annex IV

Electrical therapeutic devices

Electrical devices intended for diagnosis

Class I devices with a measuring function

EC verification

Annex IV

CONSORZIO ITALCERT Viale Sarca, 336 20126 MILANO Italy

426

Devices in sterile packs

Production quality assurance

Product quality assurance

Annex V

Annex VI

Measuring devices

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

Single-use products

- dental materials

- dental equipment

- ultrasound equipment

- electrocardiographs and electroencephalographs

- contact lenses

Non-invasive devices in contact with damaged skin

Orthopaedic implants

Devices for contact lens treatment

Devices for the sterilisation of medical devices

Invasive devices for natural orifices

Invasive devices for surgical use

Probes and catheters for urology, gastroenterology, respiratory tracts, surgical aspiration and oxygen therapy

Devices for the administration to or removal from the patient's body of medicines, body fluids or other substances

Contraceptives

Full quality assurance system

Annex II

Blood bags

Products and accessories for surgical use, such as suture needles, syringes, surgical gloves

Apparatus and accessories for muscle stimulation

MATERIALPRÜFUNGSAMT NORDRHEIN-WESTFALEN (MPA NRW) Marsbruchstraße 186 D - 44287 DORTMUND Germany

432

Active medical devices

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

- radiotherapy equipment with non-ionizing radiation

- hearing aids and audiometers

- ultrasound equipment

- imaging equipment:

- with ionizing radiation

- with non-ionizing radiation

G-MED GROUPEMENT POUR L'ÉVALUATION DES DISPOSITIFS MÉDICAUX 33, avenue du Général Leclerc BP n° 8 92260 FONTENAY-AUX-ROSES France

459

All medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

NEMKO AS

AMTAC CERTIFICATION SERVICES LTD

Norman Road - Broadheath WA14 4EP ALTRINCHAM United Kingdom

473

All medical devices except equipment emitting ionising radiation

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

CERMET Via Aldo Moro, 22 40068 S. LAZZARO DI SAVENA Italy

476

Electromedical apparatus for physiotherapy and rehabilitation

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

Electromedical apparatus for cardiology

Electromedical apparatus for anaesthesia and cardiac surgery

Electromedical apparatus for dentistry and stomatology

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

Electromedical apparatus for nephrology and dialysis

Electromedical apparatus for pediatrics and neonatal care

Prostheses

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

Dental prostheses

Orthopaedic prostheses

Infusion and withdrawal needles

Cannulas, probes and tubes

Catheters and accessories

Tubular devices of synthetic material for administration and withdrawals

Filters for blood or solutions; other filters

Syringes

Circuits and accessories for anaesthesia and resuscitation

Equipment and accessories for dialysis

Products for dental treatment

BIOLAB SPA - CENTRO DI ANALISI E RICERCHE BIOLOGICHE Via Bruno Buozzi, 2 20090 VIMODROME Italy

477

Non-resorbable surgical implants

EC Type-examination

EC verification

Annex III

Annex IV

Devices for infusion, transfusion, injection, withdrawal, extracorporeal circuits

- ophtalmological devices

- disinfectants and antiseptics

Contact lenses maintenance products

Non-resorbable suture materials and clamps

Single-use products

Dressings

Devices, materials and apparatus for dental treatment

Surgical instruments

Gloves for medical use

Contraceptives

Devices for anaesthesia and ventilation

EC Type-examination

EC verification

Annex III

Annex IV

Catheters, drains and probes

Re-usable devices

Devices for parenteral and enteral nutrition

All Class I sterile devices

Production quality assurance

Product quality assurance

Annex V

Annex VI

ECM ZERTIFIZIERUNGSGESELLSCHAFT FÜR MEDIZINPRODUKTE IN EUROPA MBH Eifelstraße, 1C 52068 AACHEN Germany

481

Non-active medical devices:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- disposable medical products:

- infusion / transfusion sets

- catheters / catheter sets

- drainage devices

- tubing for extracorporeal circulation

- OP products

- bandages and dressings

- soft tissue implants

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

- disinfection means

- orthopaedic implants

- contact lenses

- contact lens care products

MEDCERT ZERTIFIZIERUNGS- UND PRÜFUNGSGESELLSHAFT FÜR DIE MEDIZIN GMBH Vorsetzen 32 20459 HAMBURG Germany

482

Non-active medical devices:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- orthopaedic implants

- soft tissue implants

- disposable medical products

- function implants

- non-energized medical instrumentation

- anaesthetic, orthopaedic and rehabilitation products

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- reusable non-active medical instruments

- bandages and dressings

- suture material and clamps

- dental equipment and instruments

- dental materials

- dental implants

Active medical devices:

- patient storage and transport equipment

- imaging equipment using non-ionizing radiation, with the exception of MR

- X-ray equipment apart from CT and angiography

- surgical equipment and accessories, including lithotriptors; Hf, Laser and ultra-sound surgery; endoscopes

- vital-parameter monitoring and plotting devices

- breathing apparatus and oxygen-therapy equipment including hyperbaric therapy chambers

- equipment for extracorporeal circuits, infusions and haemophoresis

- inhalation anaesthesizing equipment

- stimulation devices

- ophtalmological devices

- dental equipment

- prostheses and rehabilitation devices

- disinfection and sterilization equipment

- radiotherapy equipment with non-ionizing radiation

- medical supply units

MDC MEDICAL DEVICE CERTIFICATION GMBH Heilbronner Strasse 43 70191 STUTTGART Germany

483

Non-active medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

Active medical devices:

- devices to ascertain vital functions

- infusion devices

- ventilators and oxygen therapy apparatus, except for devices for hyperbaric therapy

- surgical devices and aids, except for lithotripsy devices

EC Type-examination

Production quality assurance

Product quality assurance

Annex III

Annex V

Annex VI

- imaging equipment:

- with ionizing radiation

- with non-ionizing radiation

- stimulators, except external pacemakers and defibrillators

- radiotherapy devices:

- with ionizing radiation and with non-ionizing radiation

- ophtalmological devices

- dental equipment

- rehabilitation devices and active prostheses

- patient storage and transport equipment

- medical supply units

SLG PRÜF- UND ZERTIFIZIERUNGS GMBH Burgstädedter Strasse 20 09232 Hartmannsdorf Germany

494

- Narcosis devices, incubators, ventilators and oxygen therapy apparatus, except for devices for hyperbaric therapy

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- surgical equipment and ancillary surgical equipment

- ophtalmological devices

- dental equipment

- disinfection and sterilization equipment

- radiotherapy equipment with non-ionizing radiation

- medical supply units

- patient storage and transport equipment

Equipment for measuring and/or monitoring and/or recording and/or analysing physiological parameters and vital functions

Equipment for rehabilitation

Auditory prostheses

Software for operating medical devices

- Devices for imaging processes with non-ionizing radiation, except for nuclear spin tomography devices

- Radiation therapy devices using non-ionizing radiation, except for laser therapy devices

- stimulators

- dental treatment devices

- rehabilitation devices and active prostheses

- patient storage and transport equipment

- devices for medical care

Full quality assurance system

EC Type-examination

EC verification

Product quality assurance

Annex II

Annex III

Annex IV

Annex VI

SOCIETE NATIONALE DE CERTIFICATION ET D'HOMOLOGATION S.À.R.L. (SNCH) 11, Route de Sandweiler 5230 SANDWEILER Luxembourg

499

All medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

INSTITUTO NACIONAL DA FARMACIA E DO MEDICAMENTO Parque da Saúde de Lisboa - Av. do Brasil 1700 LISBOA Portugal

503

Non-active medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

SIRA CERTIFICATION SERVICE SIRA TEST & CERTIFICATION LIMITED South Hill BR7 5EH Chislehurst - Kent United Kingdom

518

All active medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

EUROCAT - INSTITUTE FOR CERTIFICATION AND TESTING GMBH Wittichstrasse, 2 64295 DARMSTADT Germany

535

Non-active medical devices:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- software for the operation of medical products

- medical supply units

- patient storage and transport equipment, excluding incubators

- surgical aids

Active medical devices:

- stimulation devices

- disinfection and sterilization equipment

- prostheses and rehabilitation devices

- surgical equipment and ancillary surgical equipment

- equipment for extracorporeal circuits, infusions and haemophoresis

- ophtalmological devices

- dental equipment

- Narcosis devices, incubators, ventilators and oxygen therapy apparatus, except for devices for hyperbaric therapy

- devices to monitor and determine vital signs

- devices for extracorporeal circulation, infusions and haemopheresis

- radiotherapy devices:

- with ionizing radiation and with non-ionizing radiation

- with non-ionizing radiation

- imaging equipment: Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- with ionizing radiation

- with non-ionizing radiation

VTT INDUSTRIAL SYSTEMS (VTT TUOTTEET JA TUOTANTO) P.O. Box 13001 33101 Tampere Finland

537

Active medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

Non-active class I devices placed on the market in a sterile state

Non-active class I devices with a measuring function

EC verification

Production quality assurance

Product quality assurance

Annex IV

Annex V

Annex VI

Non-active class IIa and IIb devices

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

ZDH-ZERT [RECHTSNACHFOLGER IS DIE MDC MEDICAL DEVICE CERTIFICATION GMBH, KENN-NR 0483, STUTTGART] Heilbronner Strasse, 43 70191 STUTTGART Germany

538

Non-active medical devices

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

- orthopaedic implants

- reusable non-active medical instruments

- dental equipment and instruments

- disposable products

Active medical devices:

- high frequency surgery equipment

- dental equipment

- hearing aids and audiometers

- devices to monitor and determine vital signs

- ventilators and oxygen therapy apparatus, except for devices for hyperbaric therapy

- surgical devices and aids, except for lithotripsy devices

- electrical stimulation and acupuncture devices, hydro electric bath

- short waves and devices for treatment using heat

- rehabilitation devices and active prostheses

- patient storage and transport equipment

DANSK GODKENDELSE AF MEDICINSK UDSTYR (DGM) Kollegievej, 6 2920 CHARLOTTENLUND Denmark

543

Non-active medical devices:

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- infusion devices

- dental materials

- bandages and dressings

- dental implants

- disinfection means

- surgical articles

- contact lenses

- contact lens fluids

- sutures and adhesives

- condoms and contraceptive pessaries

- intrauterine contraceptives

- drains, probes and suction devices

- surgical implants (non-orthopaedic implants and bone cement)

Active medical devices:

- radiotherapy equipment

- radiotherapy planning software

- stimulation equipment

- heart-lung machines

- neonatal equipment

- dental devices

- hearing aids and audiometers

- electrocardiographs and electroencephalographs

- medical equipment sterilizers

- defibrillators

- equipment for measuring blood and anaesthesic gas

- surgical lasers

- ultrasound equipment

- patient-monitoring equipment and equipment for recording vital functions

- electrosurgical equipment

- single use products for heart-lung machines

- cardiovascular implants

- suction equipment

ISTITUTO DI CERTIFICAZIONE DELLA QUALITÀ PER L'INDUSTRIA CHIMICA Via G. Giardino, 4 20123 MILANO Italy

546

Medical and measuring equipment with independent power supply or non-powered

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

Dental products and materials and accessories, including powered accessories

Ophtalmic products, e.g. spectacles and intraocular lenses

Products and accessories for surgical use

Products for endoscopy and laparoscopy

Sensitive materials for medical use

Products for extracorporeal circulation and accessories, including active accessories

Catheters and non-disposable accessories

Contraceptive products

Artificial skin, etc.

Products for disinfection of medical equipment and for the treatment of contact lenses

Bendages, dressings, plasters, etc.

Materials for sutures

Disposable products

Products for anaesthesia, reanimation and respiration

Orthopaedic and rehabilitation products and materials and accessories, including powered accessories

MEDICAL PRODUCTS AGENCY

(LÄKEMEDELSVERKET)

Box 26 751 03 UPPSALA Sweden

562

Non-active medical devices

Full quality assurance system

Production quality assurance

Annex II

Annex V

NATIONAL QUALITY ASSURANCE LTD Gainsborough House - Houghton Hall Park W5 5XZ Houghton Regis, Dunstable United Kingdom

577

Devices for the administration to or removal from the patient's body of medicines, body fluids or other substances

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

- ultrasound equipment

Electromedical equipment

Anaesthetic and life support equipment

Full quality assurance system

Annex II

Drainage and suction devices (non-powered)

Surgical dressings (class IIa)

Measuring and monitoring equipment

Operating theatre equipment

Diagnostic X-ray equipment

Anaesthetic and respiratory equipment

Production quality assurance

Product quality assurance

Annex V

Annex VI

Blood contact devices

Functions relating to sterile / measuring Class I medical devices

BERLIN-CERT-PRÜF- UND ZERTIFIZIERSTELLE FÜR MEDIZINPRODUKTE GMBH AN DER TECHNISCHEN UNIVERSITÄT BERLIN Dovestrasse, 6 10587 BERLIN Germany

633

Active medical devices: EC Type-examination

EC verification

Annex III

Annex IV

- Narcosis devices, incubators, ventilators and oxygen therapy apparatus, except for devices for hyperbaric therapy

- Surgical devices and aids, except for lithotripsy, ultrasound and laser surgery devices

- anaesthetic, orthopaedic and rehabilitation devices

- prostheses and rehabilitation devices

- dental equipment

- non-energized medical instrumentation

- reusable non-active medical instruments

- radiotherapy equipment with non-ionizing radiation

- medical supply units

- patient storage and transport equipment

- dental equipment and instruments

- devices to monitor and determine vital signs

- Radiation therapy devices using non-ionizing radiation, except for laser therapy devices

- Devices for imaging processes with non-ionizing radiation, except for nuclear spin tomography devices

- devices for extracorporal circulation, infusions and haemopheresis

- dental treatment devices

Non-active medical devices:

- dental materials

- dental implants

- condoms made from natural latex

- stimulators

- patient storage and transport equipment

- devices for medical care

- Dressings

- Cleaning, disinfecting and sterilizing devices

Orthopaedic implants

Soft tissue implants

Functional implants

Single-use medical devices

PRUEFANSTALT FÜR MEDIZINISCHE GERÄTETECHNISCHE UNIVERSITÄT GRAZ Inffeldgasse, 18 8010 GRAZ Austria

636

Active medical devices and their accessories

EC Type-examination

EC verification

Annex III

Annex IV

RESEARCH CENTER FOR BIOMATERIALS S.A.

"EKEVYL S.A."

Smyrnis 15 165 62 GLYFADA Greece

653

All medical devices

Production quality assurance

Product quality assurance

Annex V

Annex VI

All medical devices

Full quality assurance system Annex II

Implantable and non-implantable orthopaedic materials and devices

Other implantable devices

EC Type-examination Annex III

Artificial limbs and related components for disabled

Bandages, surgical dressings, medical grade cotton and other relevant products

Dental devices

Disinfectants and antiseptics

Contact lenses and solutions for contact lenses

Absorbable and non-absorbable surgical sutures

- disinfectants and antiseptics

Absorbable and non-absorbable surgical sutures

Sterile and non-sterile single use products

Contraceptives

Contact lenses maintenance products

Absorbable and non-absorbable surgical sutures

Sterile and non-sterile single use products

Contraceptives

Only devices mentioned in § B

EC verification

Annex IV

INTERNATIONAL CERT ZERTIFIZIERUNG GMBH Straubinger Straße 2 94333 GEISELHÖRING Germany

712

- dental equipment and instruments

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

- dental materials

- dental implants

- reusable non-active medical instruments

PRÜF- UND FORSCHUNGSINSTITUT FÜR DIE SCHUHHERSTELLUNG E.V. Hans-Sachs-Straße 2 66955 PIRMASENS Germany

713

Non-active, non-sterile medical devices for orthopaedic treatement and the rehabilitation of the foot and leg (Category IIa)

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

UL INTERNATIONAL (UK) LTD Wonersh House Building C, Old Portsm. R. GU3 1LR GUILDFORD United Kingdom

843

Active medical devices and their accessories

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

Disinfectants and surgical instruments

Full quality assurance system

Production quality assurance

Product quality assurance

Annex II

Annex V

Annex VI

Sterile single use medical devices excluding Class III devices, ophthalmic devices, (class IIa and above) and implants

Wound dressings (Class IIa and IIb)

EC Type-examination

EC verification

Annex III

Annex IV

Gloves for medical use

Urethral catheters

EC verification Annex IV

LABORATÓRIO DE ENSAIOS E METROLOGIA DA SAÚDE - LEMES Av. Padre Cruz, Complexo Inst. Ricardo J 1699 Lisboa Codex Portugal

932

All medical devices

Full quality assurance system

EC Type-examination

EC verification

Production quality assurance

Product quality assurance

Annex II

Annex III

Annex IV

Annex V

Annex VI

- external pacemakers

- heart-defibrillator equipment

- suction equipment

- warming blankets, pads and matresses for medical use

- equipment for extracorporally induced lithotripsy

- medical gas supply system and parts (units) thereof

- medical equipment sterilizers

- Equipment for endoscopy

- operation microscopes

- ophtalmological devices

- operation and examination lamps

- fever thermometers (active)

- wheelchairs (electrically operated)

CHAPTER 5

GAS APPLIANCES AND BOILERS

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 90/396/EEC APPLIANCES BURNING GASEOUS FUELS

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

DANMARKS GASMATERIEL PRØVNING Tranegårdsvej, 20 2900 HELLERUP Denmark

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

AFNOR CERTIFICATION SA 11, avenue Francis de Pressensé 93571 SAINT-DENIS LA PLAINE CEDEX France

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

NATIONAL STANDARDS AUTHORITY OF IRELAND (NSAI) Glasnevin 9 DUBLIN Ireland

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

ISTITUTO ITALIANO DEL MARCHIO DI QUALITÀ (IMQ S.P.A.) Via Quintiliano, 43 20138 MILANO Italy

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

ENTIDAD COLABORADORA DE LA ADMINISTRACIÓN S.A. Avenida Tibidabo, 30 08022 BARCELONA Spain

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.5

Annex II.6

GASTEC CERTIFICATION B.V. Wilmersdorf, 50 ( PO Box 137, 7300 ) 7323 AC APELDOORN Netherlands

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

ISTITUTO DI RICERCHE E COLLAUDI M. MASINI SRL Via Moscova 11 20017 RHO Italy

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

DVGW DEUTSCHER VEREIN DES GAS- UND WASSERFACHES E. V. Josef-Wirmer-Straße 1-3 53123 BONN Germany

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

BSI 389 Chiswick High Road W4 4AL LONDON United Kingdom

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

ADVANTICA TECHNOLOGIES LTD - CERTIFICATION SERVICES Ashby Road LE11 3GR Loughborough United Kingdom

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

LLOYD'S REGISTER QUALITY ASSURANCE (LRQA) LTD

EUROPEAN DIRECTIVE SERVICES

Middlemarch Office Village - Siskin Drive CV3 4FJ Hiramford - Coventry United Kingdom

Appliances burning gaseous fuels

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

Annex II.3

Annex II.4

ASOCIACIÓN ESPAÑOLA DE NORMALIZACIÓN Y CERTIFICACIÓN (AENOR) C/Génova, 6 E-28004 MADRID Spain

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

SGS UNITED KINGDOM LIMITED Worle Park, Weston-Super-Mare BS22 OWA SOMERSET United Kingdom

120

Appliances burning gaseous fuels

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

Annex II.3

Annex II.4

TÜV PRODUCT SERVICE GMBH Ridlerstraße, 65 80339 MÜNCHEN Germany

123

Transportable camping equipment containing LPG

EC Type-examination

EC verification

EC verification by unit

Annex II.1

Annex II.5

Annex II.6

TÜV RHEINLAND PRODUCT SAFETY GMBH Am Grauen Stein 51105 Köln Germany

197

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.3

Annex II.4

Annex II.5

Annex II.6

DEUTSCHE GESELLSCHAFT ZUR ZERTIFIZIERUNG VON MANAGEMENTSYSTEMEN MBH - QUALITÄTS- UND UMWELTGUTACHTER August-Schanz Straße, 21 60433 FRANKFURT-AM-MAIN Germany

297

Appliances burning gaseous fuels

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

Annex II.3

Annex II.4

BUREAU VERITAS QUALITY INTERNATIONAL (BVQI) 2nd Floor, Tower Bridge Road, 224-226 SE1 2TX LONDON United Kingdom

301

Appliances burning gaseous fuels

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

Annex II.3

Annex II.4

AGENZIA NAZIONALE CERTIFICAZIONE COMPONENTI E PRODOTTI SRL Via Bronzino, 3 20133 MILANO Italy

302

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

ITS TESTING AND CERTIFICATION LTD ITS House, Cleeve Road KT22 7SB Leatherhead United Kingdom

359

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.5

Annex II.6

LABORATORI GENERAL D'ASSAIGS I INVESTIGACIONS (LGAI) Campus UAB, Apto Correos 18 8193 BELLATERRA Spain

370

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

ISTITUTO DI RICERCHE, PROVE E ANALISI SRL Via Artigiani, 63 25040 BIENNO Italy

398

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC verification

Annex II.1

Annex II.2

Annex II.3

Annex II.5

SP - SWEDISH NATIONAL TESTING AND RESEARCH INSTITUTE LTD Box 857 501 15 BORAS Sweden

402

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

ISTITUTO GIORDANO S.P.A. Via Rossini, 2 47041 BELLARIA IGEA MARINA Italy

407

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

ÖSTERREICHISCHE VEREINIGUNG FÜR DAS GAS- UND WASSERFACH Schubertring, 14 1015 Wien Austria

433

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

TECHNIGAZ A.S.B.L. Rue de Rhode, 125 1630 Linkebeek Belgium

461

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

CENTRO DE APOIO TECNOLÓGICO À INDÚSTRIA METALOMECÂNICA Rua dos Plátanos, 197 4100 PORTO Portugal

464

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

CENTRO STUDI ED ESPERIENZE ANTINCENDI Piazza Scilla, 2 00178 Roma-Capannelle Italy

469

Safety devices, adjustment devices, control devices, radiant tubes and the like, hot air generators

EC Type-examination

EC verification by unit

Annex II.1

Annex II.6

FACHAUSSCHUSS NAHRUNGS- UND GENUSSMITTEL

Prüf-und Zertifizierungsstelle im BG-PRÜ

Dynamostraße, 7-11 68165 MANNHEIM Germany

556

Commercial baking ovens and appliances

Machines and appliances for the production and processing of bread and pastry products, and pasta

Machinery and appliances for the production and processing of tobacco

Righting, filling and capping machines

Machines for the production and removal of bulk packagings and loading units

Gas heating devices for large catering establishments

Heating devices as follows:

- temperature-control devices for foodstuffs

- space heating

Industrial refrigerators and freezers:

- absorption refrigerators

Machinery and appliances for the production of confectionery such as:

- almond roasters

- popcorn makers

Sealing machines such as:

- crimping machines

EC Type-examination

EC declaration of conformity to type

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.5

Annex II.6

SGS FIMKO OY P.O. Box 30 ( Särkiniementie 3 ) 00211 HELSINKI Finland

598

Gas burners

Burning appliances for gas burners (fittings)

Appliances and equipment fitted with gas burners

EC Type-examination

Annex II.1

TUV HELLAS S.A. 24, El. Venizelou Street 15341 AG. PARASKEVI Greece

654

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

GASTEC ITALIA S.P.A. Via Treviso 32/34 31020 San Vendemiano Italy

694

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

Annex II.6

FLAM GAS LABORATORIES SRL V. Mazzini, 81/b 33080 Fiume Veneto Italy

705

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC declaration of conformity to type (guarantee of production quality)

EC declaration of conformity to type (guarantee of product quality)

EC verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

Annex II.5

INGENIERIA Y TECNICAS DE CALIDAD S.L. Polg Aurrera-Manzana 1, n° 63- 1a planta 48510 TRAPAGARAN Spain

844

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.5

Annex II.6

HELLENIC ELECTRONICS EQUIPMENT QUALITY ASSURANCE CENTER SA Ierosolimon 6 11252 ATHENS Greece

848

Appliances burning gaseous fuels

EC Type-examination

EC verification

EC verification by unit

Annex II.1

Annex II.5

Annex II.6

GASWÄRME-INSTITUT ESSEN E. V. Hafenstrasse 101 45356 ESSEN Germany

909

Appliances burning gaseous fuels

EC Type-examination

EC declaration of conformity to type

EC verification

EC verification by unit

Annex II.1

Annex II.2

Annex II.5

Annex II.6

CHAPTER 6

PRESSURE VESSELS

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 87/404/EEC SIMPLE PRESSURE

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

LLOYD'S REGISTER OF SHIPPING a.s.b.l. Karel Oomstraat 1 2018 Antwerpen Belgium

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

BUREAU VERITAS ASBL Mechelsesteenweg, 128-136 2018 Antwerpen Belgium

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

INSTITUTO DE SOLDADURA E QUALIDADE (ISQ) EN 249 - Km 3, Cabanas - Leião Tagus Park Ap119-2781 OEIRAS CODEX Portugal

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

APRAGAZ A.S.B.L. Chaussée de Vilvorde 156 1120 BRUXELLES Belgium

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ARBEJDSTILSYNET Landskronagade, 33 2100 KOBENHAVN Denmark

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV NORD CERT GMBH & CO. KG Am TÜV 1 30519 HANNOVER Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV HESSEN E. V.

TÜV CERT-ZERTIFIZIERUNGSSTELLE

Mergenthalerallee, 27 65760 ESCHBORN Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV SAARLAND E. V. Saarbrücker Strasse, 8 66280 SULZBACH Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV ANLAGENTECHNIK GMBH

UNTERNEHMENSGRUPPE TÜV RHEINLAND/BERLIN-BRANDENBURG

Am Grauen Stein 51105 Köln Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV SÜDDEUTSCHLAND BAU UND BETRIEB GMBH Westendstraße, 199 80686 MÜNCHEN Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ZURICH CERTIFICATION LIMITED 54, Hagley Road - Edgbaston B16 8QP BIRMINGHAM United Kingdom

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

LLOYD'S REGISTER OF SHIPPING - UK INDUSTRY - STATUTORY SERVICES Middlemarch Office Village/Siskin Drive CV3 4FJ COVENTRY United Kingdom

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ROYAL & SUN ALLIANCE INSURANCE PLC

(Trading as Royal & Sun Alliance Certification Services)

17 York Street M2 3RS MANCHESTER United Kingdom

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

PLANT SAFETY LTD Parklands - Wilmslow Road - Didsbury M20 2RE MANCHESTER United Kingdom

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV PFALZ E. V. Merkurstraße, 45 67663 KAISERSLAUTERN Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

RWTÜV ANLAGENTECHNIK GMBH Langemarkstrasse, 20 45138 ESSEN Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV NORD E. V.

TÜV CERT-ZERTIFIZIERUNGSSTELLE

Große Bahnstraße, 31 22525 HAMBURG Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV RHEINLAND E. V.

TÜV CERT-ZERTIFIZIERUNGSSTELLE

Am Grauen Stein 51105 Köln Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

NATIONAL STANDARDS AUTHORITY OF IRELAND (NSAI) Glasnevin 9 DUBLIN Ireland

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

CUALICONTROL ACI, S.A. Caleruega, 67 1a pianta 28033 MADRID Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ASISTENCIA TECNICA INDUSTRIAL S.A.E. Avenida de la Industria, 15 bis 28760 TRES CANTOS Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

BUREAU VERITAS ESPAÑOL S.A. c/Francisca Delgado, 11 - Arroyo de Vega 28109 ALCOBENDAS Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ENTIDAD COLABORADORA DE LA ADMINISTRACIÓN S.A. Avenida Tibidabo, 30 08022 BARCELONA Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

EUROCONTROL S.A. C/Zurbano, 39 28010 MADRID Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

INSPECCION Y GARANTIA DE CALIDAD S.A. Via de los Dos Castillas, 33 Ctr E. Atic 7 28224 POZUELO DE ALARCON Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

NORCONTROL S.A. Ctra. Nacional VI, km. 582 15168 SADA Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

GROUPEMENT DES ASSOCIATIONS DE PROPRIÉTAIRES D'APPAREILS À VAPEUR ET ÉLECTRIQUES (GAPAVE) 191, rue de Vaugirard 75015 PARIS France

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

INSTITUT DE SOUDURE Z.I. Paris Nord II - 90, rue des Vanesse 95942 Roissy CDG Cedex France

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

BUREAU VERITAS 17 place des Reflets - La Défense 2 92400 COURBEVOIE France

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ISTITUTO DI CERTIFICAZIONE EUROPEO PRODOTTI INDUSTRIALI S.R.L. Via Emilia Parmense, 11 A 29010 PONTENURE (PC) Italy

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ISTITUTO DI RICERCHE E COLLAUDI M. MASINI SRL

Via Moscova 11 20017 RHO Italy

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

CORNHILL INSURANCE PLC Haslemere Road GU30 7UN LIPHOOK, HAMPSHIRE United Kingdom

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV THÜRINGEN E.V. Melchendorfer Straße, 64 99096 ERFURT Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV TECHNISCHE ÜBERWACHUNG HESSEN GmbH Rüdesheimer Straße, 119 64285 DARMSTADT Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ICICT S.A. C/Garrotxa 10-12, Parque NMB Ed Ocean 8820 EL PRAT DE LLOBREGAT Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

LLOYD'S REGISTER ESPAÑA, S.A. C/Princesa, 29-1o 28008 MADRID Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

NOVOTEC CONSULTORES, S.A. C/Arturo Soria, 343 28033 MADRID Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

SGS, TECNOS, S.A. C/Trespaderne, 29 28042 MADRID Spain

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

DET NORSKE VERITAS BV

Offshore & Industry Services

Palace House - 3 Cathedral Street SE1 9DE LONDON United Kingdom

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

GERMANISCHER LLOYD AG, HAUPTVERWALTUNG Vorsetzen, 32 20459 HAMBURG Germany

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ISTITUTO SUPERIORE PREVENZIONE E SICUREZZA DEL LAVORO Via Urbana, 167 00184 ROMA Italy

100

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

AGENZIA NAZIONALE CERTIFICAZIONE COMPONENTI E PRODOTTI SRL Via Bronzino, 3 20133 MILANO Italy

302

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ISTITUTO CERTIFICAZIONE EUROPEA S.R.L. Via Garibaldi, 20 40011 ANZOLA Italy

303

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

STOOMWEZEN B.V. Weena Zuid 168, Postbus 769 3000 AT ROTTERDAM Netherlands

343

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

LUXCONTROL asbl 1, avenue des Terres Rouges - B.P. 349 4004 ESCH-SUR-ALZETTE Luxembourg

351

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

SGS UNITED KINGDOM LTD

INTERNATIONAL ELECTRICAL APPROVALS

South Industrial Estate, Bowburn DH6 5AD DURHAM United Kingdom

353

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ISTITUTO DI RICERCHE, PROVE E ANALISI SRL Via Artigiani, 63 25040 BIENNO Italy

398

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ISTITUTO GIORDANO S.P.A. Via Rossini, 2 47041 BELLARIA IGEA MARINA Italy

407

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV-ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

DET NORSKE VERITAS INSPECTION AB Warfvinges väg 19B - PO Box 30234 104 25 STOCKHOLM Sweden

409

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

INSPECTA OY PO Box 44 00811 HELSINKI Finland

424

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ISTITUTO DI CERTIFICAZIONE INDUSTRIALE PER LA MECCANICA S.P.A. (ICIM S.P.A.) Via G. Giardino, 4 20123 MILANO Italy

425

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

CONSORZIO ITALCERT Viale Sarca, 336 20126 MILANO Italy

426

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

METALLURGICAL INDUSTRIAL RESEARCH & TECHNOLOGICAL DEVELOPMENT CENTER - MIRTEC S.A. A' Industrial Area of Volos 38500 VOLOS Greece

437

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

VERITEC LIMITED 410 The Quadrant, Birchwood Park WA3 6AT WARRINGTON United Kingdom

466

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

REGISTRO ITALIANO NAVALE Via Corsica 12 16128 GENOVA Italy

474

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ISTITUTO ITALIANO DELLA SALDATURA Lungo Bisagno Istria 15 16141 GENOVA Italy

475

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

CERMET Via Aldo Moro, 22 40068 S. LAZZARO DI SAVENA Italy

476

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

VENETA ENGINEERING SRL Via Lovanio 8/10 37135 VERONA Italy

505

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

AIB-VINÇOTTE asbl 27-29, avenue André Drouart 1160 BRUXELLES Belgium

512

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

LLOYD'S REGISTER QUALITY ASSURANCE GmbH

Managementzertifizierer und Umweltgutachterorganisation

Mönckebergstraße, 27 20095 HAMBURG Germany

525

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ABS GROUP LIMITED ABS House - 1 Frying Pan Alley E1 7HS LONDON United Kingdom

528

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TÜV BAYERN SZA TECHNISCHE PRÜF-GMBH Arsenal Objekt, 207 1030 Wien Austria

531

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TPA - ENERGIE- UND UMWELTTECHNIK GMBH Laxenburgerstraße, 228 1230 Wien Austria

532

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

HELLENIC REGISTER OF SHIPPING Akti Miaouli 23 185 35 PIRAEUS Greece

618

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

TUV HELLAS S.A. 24, El. Venizelou Street 15341 AG. PARASKEVI Greece

654

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

MOODY TOTTRUP HELLAS S.A. Messogion avenue 387 153 43 ATHENS Greece

656

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

DEKRA AUTOMOBIL GMBH Handwerkstrasse 15 70565 STUTTGART Germany

685

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ITEVELESA - INSPECCIÓN TÉCNICA DE VEHÍCULOS LEONESA S.A. C/Gobelas, 47-49 28023 MADRID Spain

719

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

WEZOL S.L. Torretxu Bidea, 7 48150 SONDIKA Spain

720

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

INGENIERIA Y TECNICAS DE CALIDAD S.L. Polg Aurrera-Manzana 1, n° 63- 1a planta 48510 TRAPAGARAN Spain

844

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

ASSOCIATION POUR LA SÉCURITÉ DES APPAREILS À PRESSION (ASAP) Imm. Ampère - 16, rue Ampère 95307 CERGY PONTOISE France

851

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

EUROPEAN INSPECTION AND CERTIFICATION COMPANY SA - EUROCERT SA Tatoiou 73 & Char. Trikoupi 14564 ATHENS Greece

1128

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

SGS - CIAT PORTUGUESA - CONSULTORIA, INSPECÇÃO E AUDITORIAS TECNICAS, UNIPESSOAL, LDA Av. José Gomes Ferreira, Ed Atlas 5o/6o 1495-139 MIRAFLORES-ALGÉS Portugal

1155

Simple pressure vessels

EC Type-examination

EC verification

EC declaration of conformity

Article 10

Article 11

Articles 12, 13 and 14

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 97/23/EC PRESSURE EQUIPMENT

Notified bodies as per Article 12 or recognized third-parties organizations as per Article 13

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

ASOCIACIÓN ESPAÑOLA DE ENSAYOS NO DESTRUCTIVOS C/Bocangel, 28 - 2o Izda 28028 Madrid Spain

Pressure equipment

Approval of non-destructive testing personnel

Annex I, 3.1.3

ASOCIACIÓN ESPAÑOLA DE SOLDADURA Y TECNOLOGÍAS DE UNIÓN C/Gabino Jimeno, 5B 28026 MADRID Spain

Pressure equipment

Approval of permanent joining personnel

Annex I, 3.1.2

ÖSTERREICHISCHE GESELLSCHAFT FÜR ZERSTÖRUNGSFREIE PRÜFUNG (ÖGFZP) Krugerstraße 16 1015 WIEN Austria

Pressure equipment

Approval of non-destructive testing personnel

Annex I, 3.1.3

INDUZERT - AKKREDITIERTE ZERTIZIERUNGS- UND ÜBERWACHUNGSSTELLE DER VOEST ALPINE STAHL LINZ GMBH Voest Alpine Straße 3 4031 LINZ Austria

Pressure equipment

Approval of permanent joining personnel

Annex I, 3.1.2

SCHWEISSTECHNISCHE ZENTRALANSTALT E. V. (SZA) Arsenal, Objekt 207 1030 Wien Austria

Pressure equipment

Approval of permanent joining personnel

Annex I, 3.1.2

UNTERSTÜTZUNGSVEREIN FÜR DIE ZERTIFIZIERUNGSSTELLE DES BERUFSFÖRDERUNGSINSTITUTES (BFI CERT) Parkstraße 11 8700 LEOBEN Austria

Pressure equipment

Approval of permanent joining personnel

Annex I, 3.1.2

ZERTIFIZIERUNGSSTELLE WIFI ÖSTERREICH Wiedner Hauptstraße 63 1045 WIEN Austria

Pressure equipment

Approval of permanent joining personnel

Annex I, 3.1.2

DEUTSCHER VERBAND FÜR SCHWEISSEN UND VERWANDTE VERFAHREN E. V.

DVS-PERSZERT IM DVS

Aachener Straße 172 40223 DÜSSELDORF Germany

Pressure equipment

Approval of permanent joining personnel

Annex I, 3.1.2

DGZFP - DEUTSCHE GESELLSCHAFT FÜR ZERSTÖRUNGSFREIE PRÜFUNG E. V. Max-Planck-Strasse 6 12489 BERLIN Germany

Pressure equipment

Approval of non-destructive testing personnel

Annex I, 3.1.3

DVS ZERT E. V. Aachener Straße 172 40223 DÜSSELDORF Germany

Pressure equipment

Approval of permanent joining procedures

Annex I, 3.1.2

(SLV) SCHWEISSTECHINSCHE LEHR- UND VERSUCHSANSTALT MECKLENBURG-VORPOMMERN GMBH Erich-Schlesinger-Straße 50 18059 ROSTOCK Germany

Pressure equipment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex I, 3.1.2

(SLV) SCHWEISSTECHNISCHE LEHR- UND VERSUCHSANSTALT BERLIN BRANDENBURG GMBH Luxemburger Straße 21 13353 BERLIN Germany

Pressure equipment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex I, 3.1.2

(SLV) SCHWEISSTECHNISCHE LEHR- UND VERSUCHSANSTALT - MANNHEIM GMBH Käthe-Kollwitz-Straße 19 68169 MANNHEIM Germany

Pressure equipment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex I, 3.1.2

(SLV) SCHWEISSTECHNISCHE LEHR- UND VERSUCHSANSTALT - HALLE GMBH Köthener Str. 33a 06118 HALLE Germany

Pressure equipment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex I, 3.1.2

(SLV) SCHWEISSTECHNISCHE LEHR- UND VERSUCHSANSTALT - SAARLAND GMBH Heuduckstraße 91 66117 SAARBRÜCKEN Germany

Pressure equipment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex I, 3.1.2

(SLV) SCHWEISSTECHNISCHE LEHR- UND VERSUCHSANSTALT - HANNOVER Am Lindener Hafen 1 30453 HANNOVER Germany

Pressure equipment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex I, 3.1.2

SECTOR CERT GMBH Kirchstraße 12 53840 TROISDORF Germany

Pressure equipment

Approval of non-destructive testing personnel

Annex I, 3.1.3

COFREND - CONFÉDÉRATION FRANÇAISE DES ESSAIS NON DESTRUCTIFS 1 rue Boissier 75724 PARIS CEDEX 15 France

Pressure equipment

Approval of non-destructive testing personnel

Annex I, 3.1.3

STICHTING VOOR DE CERTIFICATIE VAN VAKBEKWAAMHEID SKO Boerhaavelaan 40, Postbus 190 2700 AD ZOETERMEER Netherlands

Pressure equipment

Approval of non-destructive testing personnel

Annex I, 3.1.3

KVALITETSTEKNIK NDT AB Industrigatan 6 46137 TROLLHÄTTAN Sweden

Pressure equipment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex I, 3.1.2

NDT TRAINING CENTER AB Björnövägen 20 721 31 VÄSTERÅS Sweden

Pressure equipment

Approval of non-destructive testing personnel

Annex I, 3.1.3

SAQ OFP CERTIFIERING AB Neongaten 4 B 43153 Mölndal Sweden

Pressure equipment

Approval of non-destructive testing personnel

Annex I, 3.1.3

FORCE TECHNOLOGY SWEDEN AB Tallmätargatan 7 721 34 VÄSTERÅS Sweden

Pressure equipment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex I, 3.1.2

TRK KONTROLLADMINISTRATION AB Tärningholmsgatan 9 21751 MALMÖ Sweden

Pressure equipment

Approval of permanent joining personnel

Annex I, 3.1.2

TWI CERTIFICATION LTD Granta Park Great Abingdon CB1 6AL CAMBRIGDGE United Kingdom

Pressure equipment

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex I, 3.1.2

Annex I, 3.1.3

LAADUNVARMISTUS OY Varvintie 17 92100 RAAHE Finland

Pressure equipment

Approval of permanent joining personnel

Annex I, 3.1.2

CENTRO ITALIANO DI COORDINAMENTO PER LE PROVE NON DISTRUTTIVE (CICPND) Via C. Pisacane 46 LEGNANO Italy

Pressure equipment

Approval of non-destructive testing personnel

Annex I, 3.1.3

BELGIAN ASSOCIATION FOR NON-DESTRUCTIVE TESTING A.S.B.L. (BANT) Allée de la Cense Rouge, 15 4031 ANGLEUR Belgium

Pressure equipment

Approval of non-destructive testing personnel

Annex I, 3.1.3

EWIS AG - EUROPÄISCHER WERKSTOFF- UND INSPEKTIONSSERVICE Einsiedelstrasse, 6 23554 LÜBECK Germany

Pressure equipment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex I, 3.1.2

Annex I, 3.1.3

AIB-VINÇOTTE INTERNATIONAL S.A. 27-29, avenue André Drouart 1160 BRUXELLES Belgium

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

BUREAU VERITAS ASBL Mechelsesteenweg, 128-136 2018 Antwerpen Belgium

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

INSTITUTO DE SOLDADURA E QUALIDADE (ISQ) EN 249 - Km 3, Cabanas - Leião Tagus Park Ap119-2781 OEIRAS CODEX Portugal

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

APRAGAZ A.S.B.L. Chaussée de Vilvorde 156 1120 BRUXELLES Belgium

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

ARBEJDSTILSYNET Landskronagade, 33 2100 KOBENHAVN Denmark

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

TÜV SAARLAND E. V. Saarbrücker Strasse, 8 66280 SULZBACH Germany

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

TÜV ANLAGENTECHNIK GMBH

UNTERNEHMENSGRUPPE TÜV RHEINLAND/BERLIN-BRANDENBURG

Am Grauen Stein 51105 Köln Germany

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

TÜV SÜDDEUTSCHLAND BAU UND BETRIEB GMBH Westendstraße, 199 80686 MÜNCHEN Germany

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

ZURICH CERTIFICATION LIMITED 54, Hagley Road - Edgbaston B16 8QP BIRMINGHAM United Kingdom

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

LLOYD'S REGISTER OF SHIPPING - UK INDUSTRY - STATUTORY SERVICES Middlemarch Office Village/Siskin Drive CV3 4FJ COVENTRY United Kingdom

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

ROYAL & SUN ALLIANCE INSURANCE PLC

(Trading as Royal & Sun Alliance Certification Services)

17 York Street M2 3RS MANCHESTER United Kingdom

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

PLANT SAFETY LTD Parklands - Wilmslow Road - Didsbury M20 2RE MANCHESTER United Kingdom

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

TÜV PFALZ E. V. Merkurstraße, 45 67663 KAISERSLAUTERN Germany

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

RWÔÜV ANLAGENTECHNIK GMBH Langemarkstrasse, 20 45138 ESSEN Germany

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

TÜV NORD E. V.

TÜV CERT-ZERTIFIZIERUNGSSTELLE

Große Bahnstraße, 31 22525 HAMBURG Germany

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

ASISTENCIA TECNICA INDUSTRIAL S.A.E. Avenida de la Industria, 15 bis 28760 TRES CANTOS Spain

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Article 11

Annex I, 3.1.2

BUREAU VERITAS ESPAÑOL S.A. c/Francisca Delgado, 11 - Arroyo de Vega 28109 ALCOBENDAS Spain

Pressure equipment Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Article 11

Annex I, 3.1.2

ENTIDAD COLABORADORA DE LA ADMINISTRACION S.A. Avenida Tibidabo, 30 08022 BARCELONA Spain

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Article 11

Annex I, 3.1.2

EUROCONTROL S.A. C/Zurbano, 39 28010 MADRID Spain

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Article 11

Annex I, 3.1.2

INSPECCION Y GARANTIA DE CALIDAD S.A. Via de los Dos Castillas, 33 Ctr E. Atic 7 28224 POZUELO DE ALARCON Spain

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Article 11

Annex I, 3.1.2

GROUPEMENT DES ASSOCIATIONS DE PROPRIÉTAIRES D'APPAREILS À VAPEUR ET ÉLECTRIQUES (GAPAVE) 191, rue de Vaugirard 75015 PARIS France

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

BUREAU VERITAS 17 place des Reflets - La Défense 2 92400 COURBEVOIE France

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

LABORATOIRE NATIONAL D'ESSAIS (LNE) 1, rue Gaston Boissier 75724 PARIS CEDEX 15 France

Pressure-cookers

EC Type-examination

EC design-examination

Annex III - Module B

Annex III - Module B1

DVGW DEUTSCHER VEREIN DES GAS- UND WASSERFACHES E. V. Josef-Wirmer-Straße 1-3 53123 BONN Germany

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

BSI 389 Chiswick High Road W4 4AL LONDON United Kingdom

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

Annex I, 3.1.3

TÜV THÜRINGEN E. V. Melchendorfer Straße. 64 99096 ERFURT Germany

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

TÜV TECHNISCHE ÜBERWACHUNG HESSEN GmbH Rüdesheimer Straße, 119 64285 DARMSTADT Germany

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

LLOYD'S REGISTER ESPAÑA, S.A. C/Princesa, 29-1o 28008 MADRID Spain

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

NOVOTEC CONSULTORES, S.A. C/Arturo Soria, 343 28033 MADRID Spain

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Article 11

Annex I, 3.1.2

SGS, TECNOS, S.A. C/Trespaderne, 29 28042 MADRID Spain

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Article 11

Annex I, 3.1.2

GERMANISCHER LLOYD AG, HAUPTVERWALTUNG Vorsetzen, 32 20459 HAMBURG Germany

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

ASOCIACION ESPAÑOLA DE NORMALIZACION Y CERTIFICACION (AENOR) C/Génova, 6 28004 MADRID Spain

Portable fire extinguishers

Pressure accessories

Safety accessories

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module E

Annex III - Module H

Annex III - Module H1

ISTITUTO SUPERIORE PREVENZIONE E SICUREZZA DEL LAVORO Via Urbana, 167 00184 ROMA Italy

100

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

FORCE INSTITUT, FORCE-DANTEST CERT Park Alle 345 2605 Brøndby Denmark

200

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

Annex I, 3.1.3

STOOMWEZEN B.V. Weena Zuid 168, Postbus 769 3000 AT ROTTERDAM Netherlands

343

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

SGS UNITED KINGDOM LTD

INTERNATIONAL ELECTRICAL APPROVALS

South Industrial Estate, Bowburn DH6 5AD DURHAM United Kingdom

353

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

ISTITUTO GIORDANO S.P.A. Via Rossini, 2 47041 BELLARIA IGEA MARINA Italy

407

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

TÜV-ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

DET NORSKE VERITAS INSPECTION AB Warfvinges väg 19B - PO Box 30234 104 25 STOCKHOLM Sweden

409

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

INSPECTA OY PO Box 44 00811 HELSINKI Finland

424

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of nnon-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

Annex I, 3.1.3

CONSORZIO ITALCERT Viale Sarca, 336 20126 MILANO Italy

426

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

METALLURGICAL INDUSTRIAL RESEARCH & TECHNOLOGICAL DEVELOPMENT CENTER - MIRTEC S.A. A' Industrial Area of Volos 38500 VOLOS Greece

437

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

CENTRO DE APOIO TECNOLÓGICO À INDÚSTRIA METALOMECÂNICA Rua dos Plátanos, 197 4100 PORTO Portugal

464

Pressure equipment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

Full quality assurance

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module E

Annex III - Module F

Annex III - Module H

LLOYD'S REGISTER QUALITY ASSURANCE GmbH

Managementzertifizierer- und Umweltgutachterorganisation

Mönckebergstraße, 27 20095 HAMBURG Germany

525

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approoval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

CENTRE TECHNIQUE DES INDUSTRIES MÉCANIQUES (CETIM) 52, rue Felix Louat - B.P. 80067 60304 SENLIS France

526

Pressure equipment

European approval of materials

Article 11

ABS GROUP LIMITED ABS House - 1 Frying Pan Alley E1 7HS LONDON United Kingdom

528

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

TÜV BAYERN SZA TECHNISCHE PRÜF - GMBH Arsenal Objekt, 207 1030 Wien Austria

531

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

Annex I, 3.1.3

TPA - ENERGIE- UND UMWELTTECHNIK GMBH Laxenburgerstraße, 228 1230 Wien Austria

532

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of non-destructive testingg personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

Annex I, 3.1.3

BUNDESANSTALT FÜR MATERIALFORSCHUNG UND PRÜFUNG (BAM) Unter den Eichen 87 12205 BERLIN Germany

589

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

KIWA N.V., CERTIFICATIE EN KEURINGEN Sir Winston Churchill-laan, 273, Postbus 70 2280 AB RIJSWIJK Netherlands

620

Pressure equipment of categories II, III, IV as parts of LPG installations

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

ÅF-KONTROLL AB PO Box 35 104 25 STOCKHOLM Sweden

640

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

TUV HELLAS S.A. 24, El. Venizelou Street 15341 AG. PARASKEVI Greece

654

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Annex I, 3.1.2

DEKRA AUTOMOBIL GMBH Handwerkstrasse 15 70565 STUTTGART Germany

685

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

ZENTRALLABOR DER TOS E. V. - ZERTIFIZIERUNGSSTELLE FÜR AUFZÜGE Fischerweg 408 18069 ROSTOCK Germany

686

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

WEZOL S.L. Torretxu Bidea, 7 48150 SONDIKA Spain

720

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Article 11

Annex I, 3.1.2

ENTIDAD DE CERTIFICATION Y ASEGURAMIENTO, S.A. WTC Muelle Barc. Ed Sur, planta 7 8039 BARCELONA Spain

830

Pressure equipment

Production quality assurance

Product quality assurance

Full quality assurance

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module H

BRE CERTIFICATION LTD, INCORPORATING BRE CERTIFICATION, LPCB AND WIMLAS Garston WD25 9XX WATFORD United Kingdom

832

Portable fire extinguishers

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

Full quality assurance

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module E

Annex III - Module F

Annex III - Module H

Components for water and gas fire suppression and extinguishing systems

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

INGENIERIA Y TECNICAS DE CALIDAD S.L. Polg Aurrera-Manzana 1, n° 63- 1a planta 48510 TRAPAGARAN Spain

844

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Article 11

Annex I, 3.1.2

ASSOCIATION POUR LA SECURITÉ DES APPAREILS À PRESSION (ASAP) Imm. Ampère - 16, rue Ampère 95307 CERGY PONTOISE France

851

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

HARTFORD STEAM BOILER INTERNATIONAL GMBH Frerener Str. 13 49785 LINGEN Germany

871

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

SIGNUM GESELLSCHAFT FÜR ANLAGENSICHERHEIT MBH Industriepark Hoechst Geb. K801 65926 Frankfurt Germany

874

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

Approval of permanent joining procedures

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Annex I, 3.1.2

POLARTEST OY P.O. Box 41 01621 VANTAA Finland

875

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

HSB INSPECTION QUALITY LIMITED 11 Seymor Court, Tudor Road, Manor Park WA7 1SY RUNCORN United Kingdom

878

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

TÜV UK LIMITED Surrey House, Surrey Street CR9 11XZ CROYDON United Kingdom

879

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

GASWÄRME-INSTITUT ESSEN E. V. Hafenstrasse 101 45356 ESSEN Germany

909

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

RINAVE - QUALIDADE E SEGURANCA ACE Estr. Paço do Lumiar/Pólo Tecnol., Lote 17 1600-485 LISBOA Portugal

933

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

VELOSI CERTIFICATION BUREAU LIMITED Clifton House - 318A Kings Road RG1 4JG READING United Kingdom

946

Pressure equipment and assemblies except for portable fire extinguishers and bottles for breathing apparatus

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

TUV - ITALIA SRL Via Bettola 32 20092 CINISELLO BALSAMO Italy

948

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

AIB-VINCOTTE NEDERLAND B.V. Heusing 2 - Postbus 6869 4802 HW BREDA Netherlands

954

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Approval of nnon-destructive testing personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

Annex I, 3.1.3

BRITISH INSPECTING ENGINEERS LIMITED Chatsworth Technology Park - Dunston Road S41 8XA Chesterfield United Kingdom

964

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

INSTITUTO TECNOLÓGICO DO GÁS (ITG) Av. Almirante G. Coutinho, C. E. Sintra

Ed. 15

2710 SINTRA Portugal

1006

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

TÜV RHEINLAND IBERICA, S.A. C/José Silva, 17 28043 Madrid Spain

1027

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

Article 11

Annex I, 3.1.2

ECOSIM SRL Via Ponchielli 28/B 51016 MONTECATINI TERME Italy

1091

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

SOCIETA CONSORTILE PASCAL A.R.L. Via G. Giardino 4 20123 MILANO Italy

1115

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

KW2 METINGEN EN INSPECTIES B.V. Terminalweg, 4 / Postbus 2620 3800 GD AMERSFOORT Netherlands

1117

Pressure equipment of categories II, III, IV as parts of refrigeration installations

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

EUROPEAN INSPECTION AND CERTIFICATION COMPANY SA - EUROCERT SA Tatoiou 73 & Char. Trikoupi 14564 ATHENS Greece

1128

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

SGS - CIAT PORTUGUESA - CONSULTORIA, INSPECÇÃO E AUDITORIAS TECNICAS, UNIPESSOAL, LDA Av. José Gomes Ferreira, Ed Atlas 5o/6o 1495-139 MIRAFLORES-ALGÉS Portugal

1155

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Annex I, 3.1.2

SGS ICS IBERICA, S.A. C/Trespaderne, 29 28042 MADRID Spain

1181

Pressure equipment

Production quality assurance

Product quality assurance

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module H

Annex III - Module H1

SCHWEISSTECHNISCHE LEHR- UND VERSUCHSANSTALT SLV - DUISBURG, NIEDERLASSUNG DER GSI MBH Bismarckstrasse, 85 47057 DUISBURG Germany

1182

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

TECNO SRL Via del Portici 27 17014 CAIRO MONTENOTTE Italy

1214

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

EURO-PED SRL Via Aeroporto Francesco Baracca 45 39100 BOLZANO Italy

1233

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Production quality assurance

Product quality assurance

Product verification

EC unit verification

Full quality assurance

Full quality assurance with design examination and special surveillance of the final assessment

European approval of materials

Approval of permanent joining procedures

Approval of permanent joining personnel

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module D

Annex III - Module D1

Annex III - Module E

Annex III - Module E1

Annex III - Module F

Annex III - Module G

Annex III - Module H

Annex III - Module H1

Article 11

Annex I, 3.1.2

LLOYDS REGISTER OF SHIPPING AND INDUSTRIAL SERVICES SA 87 Akti Miaouli 185 38 Piraeus Greece

1241

Pressure equipment

Internal manufacturing checks with monitoring of the final assessment

EC Type-examination

EC design-examination

Conformity to type

Product verification

EC unit verification

Annex III - Module A1

Annex III - Module B

Annex III - Module B1

Annex III - Module C1

Annex III - Module F

Annex III - Module G

CHAPTER 7

TELECOMMUNICATIONS TERMINAL EQUIPMENT

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 99/5/EC RADIO AND TELECOMMUNICATIONS TERMINAL EQUIPMENT

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

ISTITUTO ITALIANO DEL MARCHIO DI QUALITÀ (IMQ S.P.A.) Via Quintiliano, 43 20138 MILANO Italy

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

UNION TECHNIQUE DE L'AUTOMOBILE, DU MOTOCYCLE ET DU CYCLE Autodrome de Linas-Montlhéry - B.P.212 91311 Montlhéry Cedex France

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

LABORATOIRE CENTRAL DES INDUSTRIES ELECTRIQUES Avenue du Général Leclerc, 33 92266 FONTENAY-AUX-ROSES France

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

BSI 389 Chiswick High Road W4 4AL LONDON United Kingdom

Radio equipment and telecommunications terminal equipment

Full quality assurance

Annex V

TÜV PRODUCT SERVICE GMBH Ridlerstraße, 65 80339 MÜNCHEN Germany

123

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

LGA - LANDESGEWERBEANSTALT BAYERN Tillystraße, 2 90431 Nürnberg Germany

125

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

BRITISH APPROVALS BOARD FOR TELECOMMUNICATIONS Segensworth Road PO15 5RH Fareham United Kingdom

168

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

TELESTYRELSEN Holsteinsgade, 63 2100 København Denmark

170

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

TDC MOBILE INTERNATIONALE A/S, TELELABORATORIET Telegade 2 2630 TAASTRUP Denmark

189

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

QINETIQ LTD Fraser R., Fort Cumberland Road PO4 9LJ Portsmouth United Kingdom

191

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

TÜV RHEINLAND PRODUCT SAFETY GMBH Am Grauen Stein 51105 Köln Germany

197

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

TNO CERTIFICATION B.V. Laan Westenenk 501, Postbus 541 7300 AM APELDOORN Netherlands

336

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

SECRETARÍA GENERAL DE COMUNICACIONES Plaza de Cibeles s/n Palacio de Comun. 28071 MADRID Spain

341

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

KEMA QUALITY B.V. Utrechtseweg 310 ( Postbus 9035 ) 6800 ET ARNHEM Netherlands

344

Radio equipment and telecommunications terminal equipment

Full quality assurance

Annex V

ITS TESTING AND CERTIFICATION LTD ITS House, Cleeve Road KT22 7SB Leatherhead United Kingdom

359

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

SP - SWEDISH NATIONAL TESTING AND RESEARCH INSTITUTE LTD Box 857 501 15 BORÅS Sweden

402

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

TÜV - ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

SEMKO AB Torshamnsgatan, 43 164 22 KISTA Sweden

413

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

SOCIETE NATIONALE DE CERTIFICATION ET D'HOMOLOGATION S.À.R.L. (SNCH) 11, Route de Sandweiler 5230 SANDWEILER Luxembourg

499

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

TELECOMMUNICATIONS ADMINISTRATION CENTRE P.O. Box 313 00181 HELSINKI Finland

523

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

EMITECH Z.A. de l'Observat. - 3, rue des Coudriers 78180 MONTIGNY LE BRETONNEUX France

536

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

TELEFICATION B.V. Utrechtseweg 310 - P.O. Box 60004 6800 JA ARNHEM Netherlands

560

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

AEMC MESURES - ETABLISSEMENT DE CHASSIEU 7, rue Georges Mélliès 69680 CHASSIEU France

573

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

AEMC MESURES - ETABLISSEMENT DE GARGENVILLE Z.I. Garennes - 4, rue des Longueraies 78440 GARGENVILLE France

574

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

ISTITUTO SUPERIORE DELLE COMUNICAZIONI E DELLE TECNOLOGIE DELL'INFORMAZIONE Viale America, 201 00144 ROMA Italy

648

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

TECHNOLOGY INTERNATIONAL (EUROPE) LTD 60 Shrivenham Hundred Business Park SN6 8TY SWINDON United Kingdom

673

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

INGENIEURBÜRO EMCC DR. RASEK Moggast 72-74 91320 EBERMANSTADT Germany

678

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

BZT-ETS CERTIFICATION GMBH Storkower Straße 38c 15526 REICHENWALDE Germany

681

Radio equipment and telecommunications terminal equipment

Technical construction file

Annex IV

CETECOM ICT SERVICES GmbH Untertürkheimer Straße 6-10 66117 SAARBRÜCKEN Germany

682

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

PHOENIX TEST-LABOR GMBH Köningswinkel 10 32825 Blomberg Germany

700

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Full quality assurance

Annex III

Annex IV

Annex V

BABT PRODUCT SERVICE Segensworth Road PO15 5RH Fareham United Kingdom

884

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

EMC PROJECTS LDA Holly Grove Farm, Verwood Road BH24 2DB Ashley, Ringwood United Kingdom

886

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

MOTOR INDUSTRY RESEARCH ASSOCIATION (MIRA) Watling Street CV10 0TU Nuneaton United Kingdom

888

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

RADIO FREQUENCY INVESTIGATION LTD Ewhurst Park, Ramsdell RG26 5RQ Basingstoke United Kingdom

889

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

SGS UK LTD South Industrial Estate DH6 5AD Bowburn - Co. Durham United Kingdom

890

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

TRL EMC LTD Long Green GL19 4QH Forthampton - Gloucester United Kingdom

891

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

CETECOM SARL 2 rue Jacques Monod - Parc Club O. Univ 91893 ORSAY CEDEX France

1065

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

CRITERION UK LTD 3 Daish Way, Newport PO 30 5XB ISLE OF WIGHT United Kingdom

1225

Radio equipment and telecommunications terminal equipment

Internal production control + specific apparatus tests

Technical construction file

Annex III

Annex IV

CHAPTER 8

EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 94/9/EC EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

AIB-VINÇOTTE INTERNATIONAL S.A. 27-29, avenue André Drouart 1160 BRUXELLES Belgium

Equipment and protective systems intended for use in potentially explosive atmospheres

Production quality assurance

Product quality assurance

Annex IV

Annex VII

TÜV NORD CERT GMBH & CO. KG Am TÜV 1 30519 HANNOVER Germany

Equipment in equipment group II, category 1G as follows:

EC Type-examination

Production quality assurance

Product verification

Unit verification

Annex III

Annex IV

Annex V

Annex IX

- Electrical equipment

- Components

- Safety devices, controlling devices and regulating devices

Equipment in equipment group II, categories 2G and 3G as follows:

EC Type-examination

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Internal combustion engines

- flight conveyor equipment

- Electrical equipment

- Components

- Safety devices, controlling devices and regulating devices

Equipment and protective systems intended for use in potentially explosive atmospheres

Production quality assurance

Product quality assurance

Annex IV

Annex VII

TÜV ANLAGENTECHNIK GMBH

UNTERNEHMENSGRUPPE TÜV RHEINLAND/BERLIN-BRANDENBURG

Am Grauen Stein 51105 Köln Germany

Equipment in equipment group II, category 1 as follows:

EC Type-examination

Production quality assurance

Product verification

Unit verification

Annex III

Annex IV

Annex V

Annex IX

- Electrical equipment

- Machines

- Internal combustion engines

- flight conveyor equipment

- Safety devices, controlling devices and regulating devices

Equipment in equipment group II, categories 2 and 3 as follows:

- Electrical equipment

EC Type-examination

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Machines

- Internal combustion engines flight conveyor equipment

EC Type-examination

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Safety devices, controlling devices and regulating devices

INSTITUT NATIONAL DE L'ENVIRONNEMENT INDUSTRIEL ET DES RISQUES Parc Technique ALATABP 2 60550 VERNEUIL-EN-HALATTE France

Equipment and protective systems intended for use in potentially explosive atmospheres

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

LABORATOIRE CENTRAL DES INDUSTRIES ÉLECTRIQUES Avenue du Général Leclerc, 33 92266 FONTENAY-AUX-ROSES France

Equipment and protective systems intended for use in potentially explosive atmospheres

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

PHYSIKALISCH-TECHNISCHE BUNDESANSTALT - (PTB) Bundesallee, 100 38116 BRAUNSCHWEIG Germany

102

Equipment in equipment group II, category 1 as follows:

EC Type-examination

Production quality assurance

Product verification

Unit verification

Annex III

Annex IV

Annex V

Annex IX

- Electrical equipment

- Machines

- Non electrical equipment

- Electrostatic spray equipment

- Components

- Safety devices, controlling devices and regulating devices

Autonomous protective systems (with indication of explosion characteristics) in equipment group II, categories 1, 2 and 3 as follows:

- Autonomous protective systems

- Components

- Safety devices, controlling devices and regulating devices

Equipment in equipment group II, categories 2 and 3 as follows:

EC Type-examination

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Internal combustion engines

EC Type-examination

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Electrical equipment

- Non electrical equipment

- Machines

- Electrostatic spray equipment

- Components

- Safety devices, controlling devices and regulating devices

TÜV PRODUCT SERVICE GMBH Ridlerstraße, 65 80339 MÜNCHEN Germany

123

Autonomous protective systems (with indication of explosion characteristics) in equipment group II, categories 1G, 2G and 3G as follows:

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Annex IX

- Electrical equipment

- Non electrical equipment

- Components

- Safety devices, controlling devices and regulating devices

- Machines

DEUTSCHE MONTAN TECHNOLOGIE GMBH Am Technologiepark, 1 45307 ESSEN Germany

158

Equipment in equipment groups I and II, categories M1 and 1, as follows:

EC Type-examination

Production quality assurance

Product verification

Unit verification

Annex III

Annex IV

Annex V

Annex IX

- Electrical equipment

- Non electrical equipment

- Components

- Safety devices, controlling devices and regulating devices

- Machines

Autonomous protective systems (with indication of explosion characteristics) in equipment group II, categories 1G, 2G and 3G as follows:

- Autonomous protective systems

- Components

- Safety devices, controlling devices and regulating devices

Equipment in equipment groups I and II, categories M2, 2 and 3, as follows:

EC Type-examination

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Internal combustion engines

- Gas mesurement installations

EC Type-examination

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Electrical equipment

- Non electrical equipment

- Machines

- Components

- Safety devices, controlling devices and regulating devices

LABORATORIO OFICIAL JOSÉ MARÍA DE MADARIAGA Calle Alenza, 2 28003 MADRID Spain

163

Equipment in equipment groups I and II, categories M1 and 1, as follows:

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

Equipment in equipment groups I and II, categories M2, 2 and 3, as follows:

- Autonomous protective systems

- Components

DEUTSCHE GESELLSCHAFT ZUR ZERTIFIZIERUNG VON MANAGEMENTSYSTEMEN MBH - QUALITÄTS- UND UMWELTGUTACHTER August-Schanz Straße, 21 60433 FRANKFURT-AM-MAIN Germany

297

Equipment in equipment groups I and II, categories M1 and 1, as follows:

- Electrical equipment

- Non electrical equipment

- Machines

- Gas mesurement installations

- Components

- Safety devices, controlling devices and regulating devices

Equipment in equipment groups I and II, categories M2, 2 and 3, as follows:

- Internal combustion engines

- Electrical equipment

- Non electrical equipment

Production quality assurance

Product quality assurance

Annex IV

Annex VII

- Machines

- Gas mesurement installations

- Components

- Safety devices, controlling devices and regulating devices

- Autonomous protective systems

Equipment in equipment groups I and II, categories M1, M2, 1, 2 and 3, as follows:

- Autonomous protective systems

- Components

- Safety devices, controlling devices and regulating devices

KEMA QUALITY B.V. Utrechtseweg 310 ( Postbus 9035 ) 6800 ET ARNHEM Netherlands

344

Equipment in equipment group II, as follows:

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Electrical equipment

- Non electrical equipment

- Components

- Safety devices, controlling devices and regulating devices

ITS TESTING AND CERTIFICATION LTD ITS House, Cleeve Road KT22 7SB Leatherhead United Kingdom

359

Equipment groups I and II, categories M1 and 1

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

Equipment groups I and II, categories M2 and 2

Equipment group II, category 3

Protective systems

Devices

Components

SP - SWEDISH NATIONAL TESTING AND RESEARCH INSTITUTE LTD Box 857 501 15 BORAS Sweden

402

All products excepted Internal combustion engines

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Annex IX

TÜV-ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

Equipment in equipment-group II, in this case including equipment where the source of ignition is primarily electrical.

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Annex IX

NEMKO AS

INSTITUT SCIENTIFIQUE DES SERVICES PUBLICS - SIÈGE DE COLFONTAINE

Rue Grande, 60 7340 COLFONTAINE France

492

Safety devices, controlling devices and regulating devices

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

SOCIÉTÉ NATIONALE DE CERTIFICATION ET D'HOMOLOGATION S.À.R.L. (SNCH) 11, Route de Sandweiler 5230 SANDWEILER Luxembourg

499

Equipment and protective systems intended for use in potentially explosive atmospheres

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Annex IX

SIRA CERTIFICATION SERVICE - SIRA TEST & CERTIFICATION LIMITED South Hill BR7 5EH Chislehurst - Kent United Kingdom

518

Equipment groups I and II, categories M1 and 1

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

Equipment groups I and II, categories M2 and 2

Equipment group II, category 3

Protective systems

Devices

Components

VTT INDUSTRIAL SYSTEMS (VTT TUOTTEET JA TUOTANTO) P.O. Box 13001 33101 Tampere Finland

537

- Electrical equipment

- Components

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Annex IX

UL INTERNATIONAL DEMKO A/S Lyskær, 8 - Postboks 514 2730 HERLEV Denmark

539

Electrical equipment

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Annex IX

FORSCHUNGSGESELLSCHAFT FÜR ANGEWANDTE SYSTEMSICHERHEIT UND ARBEITSMEDIZIN mbH Dynamostraße 7-11 68165 MANNHEIM Germany

588

Equipment in equipment group II, category 1G as follows:

EC Type-examination

Production quality assurance

Product verification

Unit verification

Annex III

Annex IV

Annex V

Annex IX

- Non electrical equipment

- Machines

- Components

- Safety devices, controlling devices and regulating devices

Autonomous protective systems (with indication of explosion characteristics) in equipment group II, categories 1G, 2G and 3G as follows:

- Autonomous protective systems

- Components

- Safety devices, controlling devices and regulating devices

Equipment in equipment group II, categories 2 and 3 as follows:

EC Type-examination

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Internal combustion engines

- Non electrical equipment

- Machines

- Components

- Safety devices, controlling devices and regulating devices

BUNDESANSTALT FÜR MATERIALFORSCHUNG UND PRÜFUNG (BAM) Unter den Eichen 87 12205 BERLIN Germany

589

Equipment in equipment groups I and II, categories M1 and 1, as follows:

EC Type-examination

Production quality assurance

Product verification

Unit verification

Annex III

Annex IV

Annex V

Annex IX

- Non electrical equipment

- Components

- Safety devices, controlling devices and regulating devices with risk of ignition from mechanically produced sparks

- Gas mesurement installations

Autonomous protective systems (with indication of explosion characteristics) in equipment group II, categories 1G, 2G and 3G as follows:

- Autonomous protective systems

- flameproof valves

EC Type-examination

Production quality assurance

Product verification

Unit verification

Annex III

Annex IV

Annex V

Annex IX

- Components

Equipment in equipment groups I and II, categories M2, 2 and 3, as follows:

EC Type-examination

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Non electrical equipment

- Components

- Gas mesurement installations

- Safety devices, controlling devices and regulating devices with risk of ignition from mechanically produced sparks

ELECTRICAL EQUIPMENT CERTIFICATION SERVICE - HEALTH AND SAFETY EXECUTIVE Harpur Hill SK17 9JN Buxton United Kingdom

600

Equipment groups I and II, categories M1 and 1

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

Equipment groups I and II, categories M2 and 2

Equipment group II, category 3

Protective systems

Devices

Components

IBEXU - INSTITUT FÜR SICHERHEITSTECHNIK GMBH - INSTITUT AN DER TECHNISCHEN UNIVERSITÄT - BERGAKADEMIE FREIBERG Fuchsmühlenweg, 7 09599 Freiberg Germany

637

Equipment in equipment groups I and II, categories M2, 2 and 3, as follows:

- Electrical equipment

- Non electrical equipment

- Internal combustion engines

EC Type-examination

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Machines

- Gas mesurement installations

- Components

- Safety devices, controlling devices and regulating devices

Autonomous protective systems (with indication of explosion characteristics) in equipment group II, categories 1G, 2G and 3G as follows:

EC Type-examination

Production quality assurance

Product verification

Unit verification

Annex III

Annex IV

Annex V

Annex IX

Equipment in equipment groups I and II, categories M1, M2, 1, 2 and 3, as follows:

- Autonomous protective systems

- Components

- Safety devices, controlling devices and regulating devices

Equipment in equipment groups I and II, categories M1 and 1, as follows:

- Electrical equipment

- Non electrical equipment

- Machines

- Gas mesurement installations

- Components

- Safety devices, controlling devices and regulating devices

CESI (CENTRO ELETROTECNICO SPERIMENTALE ITALIANO) GIACINTO MOTTA SPA Via Rubattino, 54 20134 MILANO Italy

722

Equipment and protective systems intended for use in potentially explosive atmospheres

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

ZELM EX PRÜF- UND ZERTIFIZIERUNGSSTELLE Siekgraben, 56 38124 BRAUNSCHWEIG Germany

820

Equipment in equipment group II, category 1G, 2G and 3G in the protection areas "o", "e", "m", "i" and "g"

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Annex IX

Electrical equipment and components in equipment group II, category 2D and 3D in the protection area "p"

ÖSTERREICHISCHES FORSCHUNGS- UND PRÜFZENTRUM ARSENAL GES.M.B.H. - ARSENAL RESEARCH Faradaygasse 3 1030 Wien Austria

894

Equipment and protective systems intended for use in potentially explosive atmospheres

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

BASEEFA (2001) LDA Health and Safety Laboratory Site SK17 9JN HARPUR HILL, BUXTON United Kingdom

1180

Equipment in equipment groups I and II, categories M1, M2, 1, 2 and 3, as follows:

EC Type-examination

Production quality assurance

Product verification

Conformity to type

Product quality assurance

Internal control of production + receipt of technical file

Unit verification

Annex III

Annex IV

Annex V

Annex VI

Annex VII

Article 8.1 (b) (ii) [Annex VIII]

Annex IX

- Protective systems

- Devices

- Components

CHAPTER 9

ELECTRICAL EQUIPMENT AND ELECTROMAGNETIC COMPATIBILITY

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 73/23/EEC ELECTRICAL SAFETY

>PLATZ FÜR EINE TABELLE>

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 89/336/EEC ELECTROMAGNETIC COMPATIBILITY

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

AIB-VINÇOTTE INTERNATIONAL S.A. 27-29, avenue André Drouart 1160 BRUXELLES Belgium

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

LABORATOIRE CENTRAL DES INDUSTRIES ÉLECTRIQUES Avenue du Général Leclerc, 33 92266 FONTENAY-AUX-ROSES France

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

BRITISH APPROVALS BOARD FOR TELECOMMUNICATIONS Segensworth Road PO15 5RH Fareham United Kingdom

168

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

BUNDESAMT FÜR POST UND TELEKOMMUNIKATION

Dienstort Saarbrücken - Benannte Stelle

Postfach 10 04 43 66004 SAARBRÜCKEN Germany

188

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

TDC MOBILE INTERNATIONALE A/S, TELELABORATORIET Telegade 2 2630 TAASTRUP Denmark

189

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

CIVIL AVIATION AUTHORITY - SAFETY REGULATION GROUP IE Aviation House, S. Area, Gatwick Airp RH9 0YR Gatwick United Kingdom

190

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

QINETIQ LTD Fraser R., Fort Cumberland Road PO4 9LJ Portsmouth United Kingdom

191

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

RADIOCOMMUNICATIONS AGENCY New King's Beam House - 22 Upper Ground SE1 9SA LONDON United Kingdom

192

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

TNO CERTIFICATION B.V. Laan Westenenk 501, Postbus 541 7300 AM APELDOORN Netherlands

336

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

SECRETARÍA GENERAL DE COMUNICACIONES Plaza de Cibeles s/n Palacio de Comun. 28071 MADRID Spain

341

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

SP - SWEDISH NATIONAL TESTING AND RESEARCH INSTITUTE LTD Box 857 501 15 BORAS Sweden

402

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

TÜV-ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

SEMKO AB Torshamnsgatan, 43 164 22 KISTA Sweden

413

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

INSTITUTO DAS COMUNICAÇÕES DE PORTUGAL Av. Jose Malhoa Lote n.o 12 1070 LISBOA Portugal

415

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

ÖSTERREICHISCHES FORSCHUNGSZENTRUM SEIBERSDORF (AUSTRIAN RESEARCH CENTRE SEIBERSDORF) 2444 SEIBERSDORF Austria

438

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

SOCIÉTÉ NATIONALE DE CERTIFICATION ET D'HOMOLOGATION S.À.R.L. (SNCH) 11, Route de Sandweiler 5230 SANDWEILER Luxembourg

499

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

EMITECH Z.A. de l'Observat. - 3, rue des Coudriers 78180 MONTIGNY LE BRETONNEUX France

536

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

TELEFICATION B.V. Utrechtseweg 310 - P.O. Box 60004 NL - 6800 JA ARNHEM Netherlands

560

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

AEMC MESURES - ÉTABLISSEMENT DE CHASSIEU 7, rue Georges Mélliès 69680 CHASSIEU France

573

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

AEMC MESURES - ÉTABLISSEMENT DE GARGENVILLE Z.I. Garennes - 4, rue des Longueraies 78440 GARGENVILLE France

574

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

ISTITUTO SUPERIORE DELLE COMUNICAZIONI E DELLE TECNOLOGIE DELL'INFORMAZIONE Viale America, 201 00144 ROMA Italy

648

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

CEBEC REGISTRED QUALITY F. VAN KALKENLAAN 9A 1070 BRUXELLES Belgium

649

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

BELCOMLAB Carlistraat 2 1140 EVERE Belgium

650

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

LABORATORIA DE NAYER JAN DE NAYERLAAN 5 2860 SINT-KATELIJNE-WAVER Belgium

651

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

INGENIEURBÜRO EMCC DR. RASEK Moggast 72-74 91320 EBERMANSTADT Germany

678

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

BZT-ETS CERTIFICATION GMBH Storkower Straße 38c 15526 REICHENWALDE Germany

681

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

CETECOM ICT SERVICES GmbH Untertürkheimer Straße 6-10 66117 SAARBRÜCKEN Germany

682

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

EMITECH GRAND SUD Rue du Massacan 3, ZI Vallée du Salaison 34741 VENDARGUES France

725

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

EMITECH ATLANTIQUE Rue de la Claie 15, ZI Angers-Beaucouzé 49070 BEAUCOUZÉ France

726

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

VERSUCHSANSTALT FÜR RADIOTECHNIK

Technologisches Gewerbemuseum TGM

Wexstraße 19-23 1200 Wien Austria

731

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

VERSUCHSANSTALT FÜR ELEKTROTECHNIK

Technologisches Gewerbemuseum TGM

Wexstraße 19-23 1200 Wien Austria

732

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

EMC HELLAS S.A. Messogeion 2-4 11527 ATHENS Greece

1002

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

EUROCEM 364, rue Armand Japy Technoland BP39 25461 Etupes Cedex France

1120

Apparatus designed for the transmission of radiocommunications not covered by Directive 99/5/EC

EC Type-examination

Article 10 (5)

CHAPTER 10

CONSTRUCTION PLANT AND EQUIPMENT

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 2000/14/EC NOISE EMISSION IN THE ENVIRONMENT BY EQUIPMENT FOR USE OUTDOORS

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

TÜV NORD CERT GMBH & CO. KG Am TÜV 1 30519 HANNOVER Germany

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

- builders' hoists for the transport of goods (combustion-engine driven)

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- compressors (< 350 kW)

- concrete-breakers and picks, hand-held

- construction winches (combustion-engine driven)

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- hydraulic power packs

- landfill compactors, loader-type with bucket (< 500 kW)

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, item 36, second indent with a rated capacity of not more than 10 tonnes)

- loaders (< 500 kW)

- mobile cranes

- motor hoes (< 3 kW)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- power generators (< 400 kW)

- tower cranes

- welding generators

TÜV SÜDDEUTSCHLAND BAU UND BETRIEB GMBH Westendstraße, 199 80686 MÜNCHEN Germany

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

RWTÜV ANLAGENTECHNIK GMBH Langemarkstrasse, 20 45138 ESSEN Germany

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

- builders' hoists for the transport of goods (combustion-engine driven)

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- compressors (< 350 kW)

- concrete-breakers and picks, hand-held

- construction winches (combustion-engine driven)

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- hydraulic power packs

- landfill compactors, loader-type with bucket (< 500 kW)

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, ite 36, second indent with a rated capacity of not more than 10 tonnes)

- loaders (< 500 kW)

- mobile cranes

- motor hoes (< 3 kW)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- power generators (< 400 kW)

- tower cranes

- welding generators

ISTITUTO DI CERTIFICAZIONE EUROPEO PRODOTTI INDUSTRIALI S.R.L. Via Emilia Parmense, 11 A 29010 PONTENURE (PC) Italy

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

ISTITUTO DI RICERCHE E COLLAUDI M. MASINI SRL Via Moscova 11 20017 RHO Italy

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

LABORATOIRE NATIONAL D'ESSAIS (LNE) 1, rue Gaston Boissier 75724 PARIS CEDEX 15 France

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

BSI 389 Chiswick High Road W4 4AL LONDON United Kingdom

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

- builders' hoists for the transport of goods (combustion-engine driven)

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- compressors (< 350 kW)

- concrete-breakers and picks, hand-held

- construction winches (combustion-engine driven)

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- hydraulic power packs

- landfill compactors, loader-type with bucket (< 500 kW)

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, item 36, second indent with a rated capacity of not more than 10 tonnes)

- loaders (< 500 kW)

- mobile cranes

- motor hoes (< 3 kW)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- power generators (< 400 kW)

- tower cranes

- welding generators

LLOYD'S REGISTER QUALITY ASSURANCE (LRQA) LTD EUROPEAN DIRECTIVE SERVICES Middlemarch Office Village - Siskin Drive CV3 4FJ Hiramford - Coventry United Kingdom

Equipment subject to noise limits:

- builders' hoists for the transport of goods (combustion-engine driven)

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- compressors (< 350 kW)

- concrete-breakers and picks, hand-held

- construction winches (combustion-engine driven)

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- hydraulic power packs

- landfill compactors, loader-type with bucket (< 500 kW)

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, item 36, second indent with a rated capacity of not more than 10 tonnes)

- loaders (< 500 kW)

- mobile cranes

- motor hoes (< 3 kW)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- power generators (< 400 kW)

- tower cranes

- welding generators

Full quality assurance

Annex VIII

ASOCIACIÓN ESPAÑOLA DE NORMALIZACIÓN Y CERTIFICACIÓN (AENOR) C/ Génova, 6 E-28004 MADRID Spain

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

LGA - LANDESGEWERBEANSTALT BAYERN Tillystraße, 2 90431 Nürnberg Germany

125

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

- compressors (< 350 kW)

- power generators (< 400 kW)

- welding generators

- builders' hoists for the transport of goods (combustion-engine driven)

- construction winches (combustion-engine driven)

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, item 36, second indent with a rated capacity of not more than 10 tonnes)

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- hydraulic power packs

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- motor hoes (< 3 kW)

ISTITUTO CERTIFICAZIONE EUROPEA S.R.L. Via Garibaldi, 20 40011 ANZOLA Italy

303

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

SGS UNITED KINGDOM LTD

INTERNATIONAL ELECTRICAL APPROVALS

South Industrial Estate, Bowburn DH6 5AD DURHAM United Kingdom

353

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- motor hoes (< 3 kW)

ITS TESTING AND CERTIFICATION LTD ITS House, Cleeve Road KT22 7SB Leatherhead United Kingdom

359

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

DEUTSCHE PRÜFSTELLE FÜR LAND- UND FORSTTECHNIK Weissensteinstraße 70/72 34114 KASSEL Germany

363

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

- builders' hoists for the transport of goods (combustion-engine driven)

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- compressors (< 350 kW)

- concrete-breakers and picks, hand-held

- construction winches (combustion-engine driven)

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- hydraulic power packs

- landfill compactors, loader-type with bucket (< 500 kW)

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, item 36, second indent with a rated capacity of not more than 10 tonnes)

- loaders (< 500 kW)

- mobile cranes

- motor hoes (< 3 kW)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- power generators (< 400 kW)

- welding generators

VDE - VERBAND DER ELEKTROTECHNIK ELEKTRONIK INFORMATIONSTECHNIK E. V. - VDE PRÜF- UND ZERTIFIZIERUNGSSTELLE Merianstraße, 28 63069 OFFENBACH (AM MAIN) Germany

366

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

- builders' hoists for the transport of goods (combustion-engine driven)

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- compressors (< 350 kW)

- concrete-breakers and picks, hand-held

- construction winches (combustion-engine driven)

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- hydraulic power packs

- landfill compactors, loader-type with bucket (< 500 kW)

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, item 36, second indent with a rated capacity of not more than 10 tonnes)

- loaders (< 500 kW)

- mobile cranes

- motor hoes (< 3 kW)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- power generators (< 400 kW)

- welding generators

LABORATORI GENERAL D'ASSAIGS I INVESTIGACIONS (LGAI) Campus UAB, Apto Correos 18 8193 BELLATERRA Spain

370

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

CENTRE NATIONAL DU MACHINISME AGRICOLE, DU GÉNIE RURAL, DES EAUX ET FORÊTS Parc de Tourvoie - BP 44 92163 Antony Cedex France

388

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

ORGANISMO DI CERTIFICAZIONE EUROPEA SRL Via Ancona, 21 00198 ROMA Italy

397

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

SVENSK MASKINPROVNING AB - SMP Fyrisborgsgatan 3 754 50 UPPSALA Sweden

404

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

- builders' hoists for the transport of goods (combustion-engine driven)

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- compressors (< 350 kW)

- concrete-breakers and picks, hand-held

- construction winches (combustion-engine driven)

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- hydraulic power packs

- landfill compactors, loader-type with bucket (< 500 kW)

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, item 36, second indent with a rated capacity of not more than 10 tonnes)

- loaders (< 500 kW)

- mobile cranes

- motor hoes (< 3 kW)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- power generators (< 400 kW)

- tower cranes

- welding generators

ISTITUTO GIORDANO S.P.A. Via Rossini, 2 47041 BELLARIA IGEA MARINA Italy

407

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

TÜV-ÖSTERREICH Krugerstrasse 16 1015 Wien Austria

408

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

ISTITUTO DI CERTIFICAZIONE INDUSTRIALE PER LA MECCANICA S.P.A. (ICIM S.P.A.) Via G. Giardino, 4 20123 MILANO Italy

425

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

SLG PRÜF UND ZERTIFIZIERUNGS GMBH Burgstädedter Strasse 20 09232 Hartmannsdorf Germany

494

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

- concrete-breakers and picks, hand-held

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- motor hoes (< 3 kW)

INDUSTRIAL ENGINEERING CONSULTANTS SRL Via Botticelli, 151 10154 Torino Italy

495

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

CONSORZIO DNV - MODULO UNO Via Paracelso 20, 20041 AGRATE BRIANZA Italy

496

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

SOCIÉTÉ NATIONALE DE CERTIFICATION ET D'HOMOLOGATION S.À.R.L. (SNCH) 11, Route de Sandweiler 5230 SANDWEILER Luxembourg

499

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

AGRICULTURAL RESEARCH CENTRE OF FINLAND - MTT/VAKOLA Vakolantie 55 03400 VIHTI Finland

504

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

FACHAUSSCHUSS TIEFBAU PRÜF- UND ZERTIFIZIERUNGSSTELLE IM BG-PRÜFZERT Landsberger Straße 309 80687 MÜNCHEN Germany

515

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- concrete-breakers and picks, hand-held

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- landfill compactors, loader-type with bucket (< 500 kW)

- loaders (< 500 kW)

- mobile cranes

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

CENTRE TECHNIQUE DES INDUSTRIES MÉCANIQUES (CETIM) 52, rue Felix Louat - B.P. 80067 60304 SENLIS France

526

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

EUROPEAN CERTIFYING ORGANIZATION SPA Via Granarolo, 62 48018 FAENZA Italy

714

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

ISTITUTO PER LE MACCHINE MOVIMENTO TERRA E VEICOLI FLUORISTRADA Via Canal Bianco, 28 44044 CASSANA Italy

716

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

NOVICON SAS DI R. CASTELLI & C. Via della Fontana 23804 MONTE MARENZO Italy

723

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

PRO-CERT SRL Via Madrid 12 41049 SASSUOLO Italy

862

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

ISTITUTO SERVIZI EUROPEI TECNOLOGICI SRL Via Ciro Menotti 10 41033 CONCORDIA (MO) Italy

865

Noise emission in the environment by equipment for use outdoors

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

EMC PROJECTS LDA Holly Grove Farm, Verwood Road BH24 2DB Ashley, Ringwood United Kingdom

886

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- compressors (< 350 kW)

- concrete-breakers and picks, hand-held

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- motor hoes (< 3 kW)

- power generators (< 400 kW)

- welding generators

MOTOR INDUSTRY RESEARCH ASSOCIATION (MIRA) Watling Street CV10 0TU Nuneaton United Kingdom

888

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Full quality assurance

Annex VI

Annex VII

Annex VIII

- builders' hoists for the transport of goods (combustion-engine driven)

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- compressors (< 350 kW)

- concrete-breakers and picks, hand-held

- construction winches (combustion-engine driven)

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- hydraulic power packs

- landfill compactors, loader-type with bucket (< 500 kW)

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, item 36, second indent with a rated capacity of not more than 10 tonnes)

- loaders (< 500 kW)

- mobile cranes

- motor hoes (< 3 kW)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- power generators (< 400 kW)

- tower cranes

- welding generators

AV TECHNOLOGY LTD Birdhall Lane, Cheadle Heath SK3 0XU STOCKPORT United Kingdom

1067

Equipment subject to noise limits:

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Unit verification

Annex VI

Annex VII

- builders' hoists for the transport of goods (combustion-engine driven)

- compaction machines (only vibrating and non-vibrating rollers, vibratory plates and vibratory rammers)

- compressors (< 350 kW)

- concrete-breakers and picks, hand-held

- construction winches (combustion-engine driven)

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- hydraulic power packs

- landfill compactors, loader-type with bucket (< 500 kW)

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, item 36, second indent with a rated capacity of not more than 10 tonnes)

- loaders (< 500 kW)

- mobile cranes

- motor hoes (< 3 kW)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- power generators (< 400 kW)

- tower cranes

- welding generators

SOUND RESEARCH LABORATORIES LTD (SRL) Holbrook House, Little Waldingfield CO10 0TH SUFFOLK United Kingdom

1088

Equipment subject to noise limits:

- builders' hoists for the transport of goods (combustion-engine driven)

- compressors (< 350 kW)

- dozers (< 500 kW)

- dumpers (< 500 kW)

- excavators, hydraulic or rope-operated (< 500 kW)

- excavator-loaders (< 500 kW)

- graders (< 500 kW)

- hydraulic power packs

- landfill compactors, loader-type with bucket (< 500 kW)

- lawnmowers (excluding agricultural and forestry equipment, and multi-purpose devices, the main motorised component of which has an installed power of more than 20 kW)

- lawn trimmers/lawn edge trimmers

- lift trucks, combustion-engine driven, counterbalanced (excluding "other counterbalanced lift trucks" as defined in Annex I, item 36, second indent with a rated capacity of not more than 10 tonnes)

- loaders (< 500 kW)

- mobile cranes

- motor hoes (< 3 kW)

- paver-finishers (excluding paver-finishers equipped with a highcompaction screed)

- power generators (< 400 kW)

- tower cranes

- welding generators

INTERNAL CONTROL OF PRODUCTION WITH ASSESSMENT OF TECHNICAL DOCUMENTATION AND PERIODICAL CHECKING

Annex VI

CHAPTER 11

MEASURING INSTRUMENTS AND PREPACKAGES

LIST OF BODIES NOTIFIED UNDER DIRECTIVE 90/384/EEC NON-AUTOMATIC WEIGHING INSTRUMENTS

Name and address of the notified bodies

Identification number

Responsible for the following products

Responsible for the following procedures/modules

Annexes/articles of the directives

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 1, rue Pierre Montet 67082 STRASBOURG CEDEX France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 42, rue du Général Larminat - B.P. 55 33035 BORDEAUX CEDEX France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 43, rue de Wailly 63038 CLERMONT-FERRAND France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT Citis - Le Pentacle, Av. de Tsukuba 14029 HEROUVILLE SAINT CLAIR France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 15-17, avenue Jean-Bertin 21000 DIJON France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 9, rue du Clos-Courtel 35043 Rennes Cedex France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 6, rue Charles de Coulomb 45077 Orléans Cedex-2 France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 2, rue Grenet-Tellier 51038 CHALONS SUR MARNE France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE D'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT Rés. d'Ajaccio - Bât. A - rue N. Péraldi 20000 AJACCIO France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 21b, Rue Alain Savary - B.P. 1269 25005 BESANÇON France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 21, avenue de la Porte des Champs 76037 Rouen Cedex France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 6-10, rue Crillon 75194 PARIS CEDEX 04 France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 6, avenue de Clavières 30107 Ales Cedex France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 15, Place Jourdan 87038 LIMOGES France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 15, rue Claude Chappe - B.P. 5038 57071 METZ France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 12, rue Michel Labrousse - B.P. 1345 31107 Toulouse Cedex France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 941, rue Charles Bourseul - B.P. 838 59508 Douai Cedex France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT La Chantrerie - 2, Rue Alfred Kastler - BP 30723 44307 NANTES CEDEX France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 44, rue Alexandre Dumas 80094 Amiens Cedex 03 France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT Maison de l'Industrie-rue de la Goelette 86280 Saint-Benoît France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 67-69, avenue du Prado 13286 Marseille Cedex 6 France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 2, Rue Antoine Charial 69426 Lyon Cedex 03 France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT Impasse Buzaré - B.P. 7001 97307 Cayenne Cedex France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

DIRECTION RÉGIONALE DE L'INDUSTRIE, DE LA RECHERCHE ET DE L'ENVIRONNEMENT 130, rue Léopold Rambaud - B.P. 12 97491 SAINTE-CLOTILDE France

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

Annex II.2

Annex II.3

NATIONAL STANDARDS AUTHORITY OF IRELAND (NSAI) Glasnevin 9 DUBLIN Ireland

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

Annex II.2

INSTITUTO PORTUGUES DA QUALIDADE Rua António Gião, 2 2829-513 CAPARICA Portugal

Non-automatic weighing instruments

EC Type-examination

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

LABORATOIRE NATIONAL D'ESSAIS (LNE) 1, rue Gaston Boissier 75724 PARIS CEDEX 15 France

Non-automatic weighing instruments

EC Type-examination

EC declaration of type conformity (guarantee of production quality)

EC unit verification

Annex II.1

Annex II.2

Annex II.4

BSI 389 Chiswick High Road W4 4AL LONDON United Kingdom

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

Annex II.2

PHYSIKALISCH-TECHNISCHE BUNDESANSTALT (PTB) Bundesallee, 100 38116 BRAUNSCHWEIG Germany

102

Non-automatic weighing instruments

EC Type-examination

Annex II.1

LANDESGEWERBEAMT BADENWÜRTTEMBERG - EICHDIREKTION Ulmer Straße 227 B 70327 STUTTGART Germany

103

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

BAYERISCHES LANDESAMT FÜR MASS UND GEWICHT Franz-Schrank Straße, 9 80638 MÜNCHEN Germany

104

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

LANDESAMT FÜR DAS MESS- UND EICHWESEN Lentzeallee, 100 14195 BERLIN Germany

105

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

LANDESAMT FÜR MESS- UND EICHWESEN DES LANDES BRANDENBURG Stahnsdorfer Damm, 81 14532 KLEINMACHNOW Germany

106

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

SENATOR FÜR ARBEIT, FRAUEN, GESUNDHEIT, JUGEND UND SOZIALES - LANDESEICHDIREKTION Faulenstraße 69 28195 BREMEN Germany

107

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

EICHDIREKTION HAMBURG Nordkanalstraße, 50 20097 HAMBURG Germany

108

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

HESSISCHE EICHDIREKTION Holzhofallee, 3 64283 DARMSTADT Germany

109

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

WIRTSCHAFTSMINISTERIUM MECKLENBURG-VORPOMMERN

Landeseichbehörde

Johannes-Stelling-Straße 14 19053 SCHWERIN Germany

110

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

MESS- UND EICHWESEN NIEDERSACHSEN Goethestraße, 44 30169 HANNOVER Germany

111

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

LANDESBETRIEB MESS- UND EICHWESEN NORDRHEIN-WESTFALEN Hugo-Eckner-Straße, 14 50829 Köln Germany

112

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

EICHDIREKTION RHEINLAND-PFALZ Steinkaut, 3 55543 BAD KREUZNACH Germany

113

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

MINISTERIUM FÜR WIRTSCHAFT EICHAUFSICHTSBEHÖRDE Am Stadtgraben 6-8 66111 SAARBRÜCKEN Germany

114

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

SÄCHSISCHES LANDESAMT FÜR MESS- UND EICHWESEN Hohe Straße, 11 01069 DRESDEN Germany

115

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

LANDESEICHAMT SACHSEN-ANHALT Merseburger Straße, 1-3 6112 HALLE (SAALE) Germany

116

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

DER MINISTER FÜR WIRTSCHAFT, TECHNOLOGIE UND VERKEHR DES LANDES SCHLESWIG-HOLSTEIN - AMT FÜR DAS EICHWESEN Duppelstraße, 63 24105 KIEL Germany

117

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

LANDESAMT FÜR MESS- UND EICHWESEN THÜRINGEN Unterpörlitzer Straße, 2 98693 ILMENAU Germany

118

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

SGS UNITED KINGDOM LIMITED Worle Park, Weston-Super-Mare BS22 OWA SOMERSET United Kingdom

120

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

Annex II.2

NMI CERTIN B.V. Postbus 394 3300 AJ DORDRECHT Netherlands

122

Non-automatic weighing instruments

EC Type-examination

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

NATIONAL WEIGHTS AND MEASURES LABORATORY Stanton Avenue TW11 0JZ Teddington United Kingdom

126

Non-automatic weighing instruments

EC Type-examination

EC unit verification

Annex II.1

Annex II.4

DUDLEY METROPOLITAN BOROUGH COUNCIL 4 Ednam Road DY1 1HW Dudley United Kingdom

128

Non-automatic weighing instruments

EC verification

Annex II.3

WEST SUSSEX COUNTY COUNCIL The Tannery - Westgate PO19 3HN Chichester United Kingdom

129

Non-automatic weighing instruments

EC verification

Annex II.3

SUFFOLK COUNTY COUNCIL St. Edmunds House, Rope Walk IP4 1LZ Ipswich United Kingdom

130

Non-automatic weighing instruments

EC verification

Annex II.3

STAFFORDSHIRE COUNTY COUNCIL Martin Street ST16 2LG STAFFORD United Kingdom

132

Non-automatic weighing instruments

EC verification

Annex II.3

GLOUCESTERSHIRE COUNTY COUNCIL Hillfield House - Denmark Road GL1 3LD GLOUCESTER United Kingdom

133

Non-automatic weighing instruments

EC verification

Annex II.3

NORFOLK COUNTY COUNCIL County Hall - Martineau Lane - Norwich NR1 2DH Norfolk United Kingdom

134

Non-automatic weighing instruments

EC verification

Annex II.3

OXFORDSHIRE COUNTY COUNCIL Rewley Road OXI 2EH OXFORD United Kingdom

135

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGHS OF BRENT AND HARROW CONSORTIUM

Trading Standards Service

249 Willesden Lane - Willesden Green NW2 5JH LONDON United Kingdom

136

Non-automatic weighing instruments

EC verification

Annex II.3

CHESHIRE COUNTY COUNCIL Backford Hall CH1 6EA Near Chichester United Kingdom

138

Non-automatic weighing instruments

EC verification

Annex II.3

SHROPSHIRE COUNTY COUNCIL The Limes, Belle Vue Road SY3 7LQ Schrewsbury United Kingdom

140

Non-automatic weighing instruments

EC verification

Annex II.3

SANDWELL METROPOLITAN BOROUGH COUNCIL Coneygree Road DY4 8XR Tipton United Kingdom

141

Non-automatic weighing instruments

EC verification

Annex II.3

EAST SUSSEX COUNTY COUNCIL County Hall BN7 1SW Lewes United Kingdom

143

Non-automatic weighing instruments

EC verification

Annex II.3

KENT COUNTY COUNCIL Springfield ME14 2LS MAIDSTONE United Kingdom

144

Non-automatic weighing instruments

EC verification

Annex II.3

WARWICKSHIRE COUNTY COUNCIL Old Budbrooke Road CV35 7DP WARWICK United Kingdom

145

Non-automatic weighing instruments

EC verification

Annex II.3

BOLTON METROPOLITAN BOROUGH COUNCIL Weston House, Weston Street BL3 2AR Bolton United Kingdom

146

Non-automatic weighing instruments

EC verification

Annex II.3

SHEFFIELD CITY COUNCIL 1 Barkers Pool S1 1EN SHEFFIELD United Kingdom

147

Non-automatic weighing instruments

EC verification

Annex II.3

DORSET COUNTY COUNCIL County Hall, Collinton Park DT1 1XJ DORCHESTER United Kingdom

148

Non-automatic weighing instruments

EC verification

Annex II.3

WOLVERHAMPTON METROPOLITAN BOROUGH COUNCIL 103 Salop Street WV3 0SR WOLVERHAMPTON United Kingdom

150

Non-automatic weighing instruments

EC verification

Annex II.3

BOROUGH OF SOUTHEND Civic Centre SS2 6ER Southend-On-Sea United Kingdom

153

Non-automatic weighing instruments

EC verification

Annex II.3

NORTH YORKSHIRE COUNTY COUNCIL County Hall DL7 8SA NORTHALLERTON United Kingdom

155

Non-automatic weighing instruments

EC verification

Annex II.3

BUCKINGHAMSHIRE COUNTY COUNCIL County Hall HP20 1UP Aylesbury, Bucks United Kingdom

157

Non-automatic weighing instruments

EC verification

Annex II.3

ESSEX COUNTY COUNCIL Beehive Lane CM2 9SY CHELMSFORD United Kingdom

172

Non-automatic weighing instruments

EC verification

Annex II.3

LANCASHIRE COUNTY COUNCIL 55 Guildhall Street PR1 3NU PRESTON United Kingdom

173

Non-automatic weighing instruments

EC verification

Annex II.3

WEST YORKSHIRE TRADING STANDARDS SERVICE Nepshaw Lane, South Morley LS27 0QP Morley, Leeds United Kingdom

174

Non-automatic weighing instruments

EC verification

Annex II.3

LEICESTERSHIRE COUNTY COUNCILTRADING STANDARDS SERVICE County Hall LE3 8RN Glenfield United Kingdom

175

Non-automatic weighing instruments

EC verification

Annex II.3

SOLIHULL METROPOLITAN BOROUGH COUNCIL PO Box 24 B91 3EG Solihull United Kingdom

177

Non-automatic weighing instruments

EC verification

Annex II.3

SOMERSET COUNTY COUNCIL County Hall TAUNTON United Kingdom

178

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF ENFIELD PUBLIC OFFICES Gentleman's Row EN2 6PS ENFIELD United Kingdom

179

Non-automatic weighing instruments

EC verification

Annex II.3

NORTHUMBERLAND COUNTY COUNCIL County Hall NE61 2EF Morpeth United Kingdom

180

Non-automatic weighing instruments

EC verification

Annex II.3

ROTHERHAM METROPOLITAN BOROUGH COUNCIL 15B Station Road S60 1HN ROTHERHAM United Kingdom

181

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF ISLINGTON 159-167 Upper Street N1 1RE Islington United Kingdom

182

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF HAVERING Mercury House, Mercury Gardens RM1 3DS Romford United Kingdom

183

Non-automatic weighing instruments

EC verification

Annex II.3

BIRMINGHAM CITY COUNCIL 1, Lancaster Circus B4 Queensway - Birmingham United Kingdom

185

Non-automatic weighing instruments

EC verification

Annex II.3

MINISTÈRE DES AFFAIRES ÉCONOMIQUES - ADMINISTRATION DU COMMERCE - INSPECTION GÉNÉRALE DE LA MÉTROLOGIE 24-26, rue J.A. De Mot 1040 BRUXELLES Belgium

195

Non-automatic weighing instruments

EC Type-examination

EC verification

EC unit verification

Annex II.1

Annex II.3

Annex II.4

DANSK KALIBRERINGSTEKNIK A/S Johan Gutenbergs Vej 5-9 8200 Århus N Denmark

198

Non-automatic weighing instruments

EC verification

Annex II.3

DELTA KVALITET & CERTIFICERING Venlighedsvej 4 2970 Hørsholm Denmark

199

Non-automatic weighing instruments

EC Type-examination

Annex II.1

FORCE INSTITUT, FORCE-DANTEST CERT Park Alle 345 2605 Brøndby Denmark

200

Non-automatic weighing instruments

EC Type-examination

EC verification

EC unit verification

Annex II.1

Annex II.3

Annex II.4

DIREZIONE GENERALE DEL COMMERCIO INTERNO E DIE CONSUMI INDUSTRIALI - UFFICIO ENTRALE METRICO Via A. Bosio, 15 00161 ROMA Italy

201

Non-automatic weighing instruments

EC Type-examination

EC declaration of type conformity (guarantee of production quality)

Annex II.1

Annex II.2

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI AGRIGENTO) Piazza Gallo, 317 92100 Agrigento Italy

202

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI ALESSANDRIA Via S. Lorenzo, 21 15100 ALESSANDRIA Italy

203

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI ANCONA Piazza XXIV Maggio, 1 60100 ANCONA Italy

204

Non-automatic weighing instruments

EC verification

Annex II.3

REGIONE AUTONOMA VALLE D'AOSTA - ASSESSORATO INDUSTRIA, ARTIGIANATO ED ENERGIA - DIREZIONE SERVIZI CAMERALI E CONTINGENTAMENTO Piazza della Repubblica, 15 11100 AOSTA Italy

205

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI AREZZO Viale Giotto, 4 52100 AREZZO Italy

206

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI ASCOLI PICENO Via Luigi Mercantini 25 63100 ASCOLI PICENO Italy

207

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI ASTI Piazza Medici, 8 14100 ASTI Italy

208

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI AVELLINO Viale Cassitto 7 83100 AVELLINO Italy

209

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI BARI Corso Cavour 2 70121 BARI Italy

210

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI BELLUNO Piazza S. Stefano, 15 32100 BELLUNO Italy

211

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI BENEVENTO Piazza IV Novembre 82100 BENEVENTO Italy

212

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI BERGAMO Largo Bortolo Belotti, 16 24100 BERGAMO Italy

213

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI BOLOGNA Piazza Mercanzia, 4 40125 BOLOGNA Italy

214

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI BOLZANO) Via Perathoner 8b/10 39100 BOLZANO Italy

215

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI BRESCIA Via Orzinuovi, 3 25125 BRESCIA Italy

216

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI BRINDISI Via Bastioni C. Quinto, 4 72100 BRINDISI Italy

217

Non-automatic weighing instruments

EC verification

Annex II.3

UFFICIO PROVINCIALE METRICO DI CAGLIARI Via Rossini, 58 B 89100 CAGLIARI Italy

218

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI CALTANISSETTA) Corso Vittorio Emanuele, 38 93100 CALTANISSETTA Italy

219

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI CAMPOBASSO Piazza della Vittoria, 1 86100 CAMPOBASSO Italy

220

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI CASERTA Via Roma, 97 81100 CASERTA Italy

221

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI CATANIA) Via Cappuccini, 2 95124 CATANIA Italy

222

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI CATANZARO Via Minniti Ippolito, 16 88100 CATANZARO Italy

223

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI CHIETI Piazza Giovan Bttista Vico, 3 66100 CHIETI Italy

224

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI COMO Via Parini, 16 22100 COMO Italy

225

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI COSENZA Via Calabria, 33 87100 COSENZA Italy

226

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI CREMONA Piazza Cavour, 5 26100 CREMONA Italy

227

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI CUNEO Via Emanuele Filiberto, 3 12100 CUNEO Italy

228

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI ENNA) Piazza Garibaldi, 1 94100 Enna Italy

229

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI FERRARA Largo Castello, 10 Via Borgoleoni, 11 44100 FERRARA Italy

230

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI FIRENZE Piazza dei Giudici, 3 50122 FIRENZE Italy

231

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI FOGGIA Via Dante, 27 71100 FOGGIA Italy

232

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI FORLÌ Corso della Repubblica, 5 47100 Forlì Italy

233

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI FROSINONE Via Alcide De Gasperi, 2 03100 FROSINONE Italy

234

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI GENOVA Via Garibaldi, 4 16124 GENOVA Italy

235

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI GORIZIA) Via Francesco Crispi, 10 34170 GORIZIA Italy

236

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI GROSSETO Via Cairoli, 10 58100 GROSSETO Italy

237

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI IMPERIA Viale Matteotti, 48 18100 IMPERIA Italy

238

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI ISERNIA Corso Risorgimento, 302 86170 Isernia Italy

239

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI L'AQUILA Via del Guastatore, 7 67100 L'AQUILA Italy

240

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI LA SPEZIA Via Veneto, 28 19100 LA SPEZIA Italy

241

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI LATINA Via Umberto I 84 04100 LATINA Italy

242

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI LECCE Viale Gallipoli, 39 73100 LECCE Italy

243

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI LIVORNO Piazza del Municipio, 48 57123 LIVORNO Italy

244

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI LUCCA Corte della Campana, 10 55100 LUCCA Italy

245

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI MACERATA Via Tommaso Lauri, 7 62100 MACERATA Italy

246

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI MANTOVA Via Fortunato Calvi, 28 46100 MANTOVA Italy

247

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI MASSA CARRARA Piazza 2 Giugno 54033 Massa Carrara Italy

248

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI MATERA Via Lucania, 82 75100 MATERA Italy

249

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI MESSINA) Piazza Cavalloti, 1 98100 MESSINA Italy

250

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI MILANO Via Meravigli, 9/b 20123 MILANO Italy

251

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI MODENA Via Ganaceto, 134 41100 MODENA Italy

252

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI NAPOLI Piazza Bovio 80100 NAPOLI Italy

253

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI NOVARA Via degli Avogadro, 6 28100 NOVARA Italy

254

Non-automatic weighing instruments

EC verification

Annex II.3

UFFICIO PROVINCIALE METRICO DI NUORO Via Salaris, 24 88100 NUORO Italy

255

Non-automatic weighing instruments

EC verification

Annex II.3

UFFICIO PROVINCIALE METRICO DI ORISTANO Via Armando Diaz, 8 09170 ORISTANO Italy

256

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI PADOVA Via E. Filiberto, 34 35100 PADOVA Italy

257

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI PALERMO) Via E. Amari, 11 90139 PALERMO Italy

258

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI PARMA Via Verdi, 2/a 43100 PARMA Italy

259

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI PAVIA Via Mentana, 27 27100 PAVIA Italy

260

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI PERUGIA Via Cacciatori delle Alpi, 40 06100 PERUGIA Italy

261

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI PESARO E URBINO Corso XI Settembre, 116 61100 PESARO Italy

262

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI PESCARA Via Conte di Ruvo, 2 65100 PESCARA Italy

263

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI PIACENZA Piazza Cavalli, 35 29100 PIACENZA Italy

264

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI PISA Piazza V. Emanuele II 5 56100 PISA Italy

265

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI PISTOIA Corso S. Fedi 36 51100 PISTOIA Italy

266

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI PORDENONE) Corso Vittorio Emanuele, 47 33170 PORDENONE Italy

267

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI POTENZA Corso XVIII Agosto, 34 85100 POTENZA Italy

268

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI RAGUSA) Piazza Libertà 97100 RAGUSA Italy

269

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI RAVENNA Viale L. C. Farini, 14 48100 RAVENNA Italy

270

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI REGGIO CALABRIA Via T. Campanella, 12 89100 REGGIO CALABRIA Italy

271

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI REGGIO EMILIA Piazza della Vittoria, 1 42100 REGGIO EMILIA Italy

272

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI RIETI Via delle Palme, 26 02100 RIETI Italy

273

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI ROMA Via De Burrò, 147 00186 ROMA Italy

274

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI ROVIGO Piazza Garibaldi, 6 45100 ROVIGO Italy

275

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI SALERNO Via S. Allende, 19 84131 SALERNO Italy

276

Non-automatic weighing instruments

EC verification

Annex II.3

UFFICIO PROVINCIALE METRICO DI SASSARI Via dei Mille, 44 07100 SASSARI Italy

277

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI SAVONA Via Quarda Inferiore, 16 17100 SAVONA Italy

278

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI SIENA Piazza G. Matteoti, 30 53100 SIENA Italy

279

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI SIRACUSA) Via Duca degli Abruzzi, 4 96100 SIRACUSA Italy

280

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI SONDRIO Via Piazzi, 23 23100 SONDRIO Italy

281

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI TARANTO Viale Virgilio, 19 74100 TARANTO Italy

282

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI TERAMO Via Savini, 48/50 64100 TERAMO Italy

283

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI TERNI Largo Don Minzoni, 6 05100 TERNI Italy

284

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI TORINO Via San Francesco da Paola, 24 10123 Torino Italy

285

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI TRAPANI) Corso Italia, 26 91100 TRAPANI Italy

286

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI TRENTO) Via Calepina, 13 38100 TRENTO Italy

287

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI TREVISO Piazza Borsa 31100 TREVISO Italy

288

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI TRIESTE) Piazza della Borsa, 14 34121 TRIESTE Italy

289

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA (C.C.I.A.A. DI UDINE) Via Morpurgo, 4 33100 UDINE Italy

290

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI VARESE Piazza Monte Grappa, 5 21100 VARESE Italy

291

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI VENEZIA Via XXII Marzo, 2032 30124 VENEZIA Italy

292

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI VERCELLI Piazza Risorgimento, 12 13100 VERCELLI Italy

293

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI VERONA Corso Porta Nuova, 96 37122 VERONA Italy

294

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI VICENZA Corso Fogazzaro, 37 36100 VICENZA Italy

295

Non-automatic weighing instruments

EC verification

Annex II.3

CAMERA DI COMMERCIO, INDUSTRIA, ARTIGIANATO E AGRICOLTURA - C.C.I.A.A. DI VITERBO Via F.lli Rosseli, 4 01100 VITERBO Italy

296

Non-automatic weighing instruments

EC verification

Annex II.3

DEUTSCHE GESELLSCHAFT ZUR ZERTIFIZIERUNG VON MANAGEMENTSYSTEMEN MBH - QUALITÄTS- UND UMWELTGUTACHTER August-Schanz Straße, 21 60433 FRANKFURT AM-MAIN Germany

297

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

Annex II.2

TÜV ZERTIFIZIERUNGSGEMEINSCHAFT e. V.

TÜV CERT

Reuterstraße, 161 53113 BONN Germany

298

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

Annex II.2

CENTRO ESPAÑOL DE METROLOGIA Calle del Alfar S/N 28760 Tres Cantos (Madrid) Spain

300

Non-automatic weighing instruments

EC Type-examination

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

LONDON BOROUGH OF REDBRIDGE 17-23 Clements Road 1G1 1BL Ilford United Kingdom

305

Non-automatic weighing instruments

EC verification

Annex II.3

HERTFORDSHIRE COUNTY COUNCIL 28 Castle Street SG14 1HN Hertford United Kingdom

306

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF HOUNSLOW 26 Glenhurst Road TW8 9BX Brentford United Kingdom

308

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF BROMLEY St. Blaise, Civic Center, Stockwell Clos BR1 3UH BROMLEY United Kingdom

310

Non-automatic weighing instruments

EC verification

Annex II.3

COMHAIRLE NAN EILEAN SIAR Sandwick Road Hsl 2bw STORNOWAY United Kingdom

311

Non-automatic weighing instruments

EC verification

Annex II.3

DIRECCIÓN GENERAL DE INDUSTRIA ENERGIA Y MINAS DE LA JUNTA DE ANDALUCIA Av. de la Republica Argentina, 25 41001 SEVILLA Spain

312

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

SERVICIO ARAGONES DE LA CALIDAD Y SEGURIDAD INDUSTRIAL Maria de Luna, 8 50015 ZARAGOZA Spain

313

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

DIRECCIÓN GENERALE DE INDUSTRIA, ENERGIA Y MINAS DE LA COMUNIDAD DE MADRID General Diaz Porlier, 35 28001 MADRID Spain

314

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

DIRECCION GENERAL DE SEGURIDAD INDUSTRIAL DE LA GENERALIDAD DE CATALUNA Av. de la Diagonal 405 Bis 08008 BARCELONA Spain

315

Non-automatic weighing instruments

EC Type-examination

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

SERVICIO DE CONTROL Y SEGURIDAD INDUSTRIAL Y MINERA DEL GOBIERNO DE NAVARRA Erletokieta, 2 31071 PAMPLONA Spain

316

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

DIRECCIÓN DE ADMINISTRACIÓN INDUSTRIAL DEL GOBIERNO BASCO Duque de Wellington, 2 10011 Vitoria-Gazteiz Spain

317

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.2

Annex II.3

Annex II.4

LONDON BOROUGH OF LEWISHAM Laurence House - 1 Catford Road SE6 4SW LONDON United Kingdom

324

Non-automatic weighing instruments

EC verification

Annex II.3

DURHAM COUNTY COUNCIL County Hall DH1 5UB DURHAM United Kingdom

325

Non-automatic weighing instruments

EC verification

Annex II.3

DEPARTMENT OF ECONOMIC DEVELOPMENT 176 Newtonbreda Road BT8 4QS BELFAST United Kingdom

326

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF WALTHAM FOREST 8 Buxton Road E17 7E Walthamstow United Kingdom

327

Non-automatic weighing instruments

EC verification

Annex II.3

BERKSHIRE COUNTY COUNCIL Shire Hall - Shinfield Park RG2 7XF Reading United Kingdom

328

Non-automatic weighing instruments

EC verification

Annex II.3

BEDFORDHIRE COUNTY COUNCIL 23 Gadsby Street MK40 3HP BEDFORD United Kingdom

329

Non-automatic weighing instruments

EC verification

Annex II.3

WILTSHIRE COUNTY COUNCIL County Hall East BA14 8JE Townbridge United Kingdom

346

Non-automatic weighing instruments

EC verification

Annex II.3

NORTHAMPTONSHIRE COUNTY COUNCIL Wooton Hall Park NN4 9BL NORTHAMPTON United Kingdom

347

Non-automatic weighing instruments

EC verification

Annex II.3

COVENTRY CITY COUNCIL Broadgate House - Broadgate CV1 1 NH COVENTRY United Kingdom

349

Non-automatic weighing instruments

EC verification

Annex II.3

CUMBRIA COUNTY COUNCIL The Courts - Carlisle CA3 8LZ CUMBRIA United Kingdom

350

Non-automatic weighing instruments

EC verification

Annex II.3

SP - SWEDISH NATIONAL TESTING AND RESEARCH INSTITUTE LTD Box 857 501 15 BORÅS Sweden

402

Non-automatic weighing instruments

EC Type-examination

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

LONDON BOROUGH OF BEXLEY, BEXLEY CIVIC OFFICES Broadway DA6 7LB Bexleyheath United Kingdom

419

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF BARKING AND DAGENHAM 2 Stour Road RM10 7IF Dagenham United Kingdom

420

Non-automatic weighing instruments

EC verification

Annex II.3

HAMPSHIRE COUNTY COUNCIL Mottisfont Court, High Street SO23 8ZE Winchester United Kingdom

422

Non-automatic weighing instruments

EC verification

Annex II.3

CAMBRIDGESHIRE COUNTY COUNCIL Hinchingbrooke Cottage - Brampton Road PE18 8NA HUNTINGDON United Kingdom

423

Non-automatic weighing instruments

EC verification

Annex II.3

INSPECTA OY PO Box 44 00811 HELSINKI Finland

424

Non-automatic weighing instruments

EC Type-examination

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

DANSK VÆGTKALIBRERING A/S Fanøvej 3 8382 HINNERUP Denmark

429

Non-automatic weighing instruments

EC verification

Annex II.3

DEVON COUNTY COUNCIL County Hall, Topsham Road EX2 4QH EXETER United Kingdom

440

Non-automatic weighing instruments

EC verification

Annex II.3

NOTTINGHAMSHIRE COUNTY COUNCIL

Trading Stand

County Hall - West Bridgford NG2 7QP NOTTINGHAM United Kingdom

441

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF BARNET Hatchcraft, The Burroughs NW4 4BN Hendon United Kingdom

442

Non-automatic weighing instruments

EC verification

Annex II.3

ROYAL BOROUGH OF KINGSTON UPON THAMES Guildhall KT1 1EU KINGSTON UPON THAMES United Kingdom

443

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF WANDSWORTH 78 Garratt Lane SW18 4D5 Wandsworth United Kingdom

444

Non-automatic weighing instruments

EC verification

Annex II.3

FEDERAL OFFICE FOR LEGAL METROLOGY AND SURVEYS, BEV Arltgasse 35 - Postfach 20 1163 Wien Austria

445

Non-automatic weighing instruments

EC Type-examination

EC declaration of type conformity (guarantee of production quality)

EC verification

EC unit verification

Annex II.1

Annex II.2

Annex II.3

Annex II.4

VERIFICATION OFFICE BREGENZ Rheinstraße, 32 6900 Bregenz Austria

447

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE EISENSTADT Johann Permayerstraße, 2A 7000 EISENSTADT Austria

448

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE GMUNDEN Habertstraße 13A - Postfach 135 4810 Gmunden Austria

449

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE GRAZ Körblergasse, 25 8010 GRAZ Austria

450

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE INNSBRUCK Bürgerstrasse, 34 6010 Innsbruck Austria

451

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE KLAGENFURT Bahnhofstraße 35 - Postfach 601 9010 KLAGENFURT Austria

452

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE KREMS/DONAU Rechte Kremszeile, 60 3500 Krems/Donau Austria

453

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE LEOBEN Erzherzog-Johann-Straße, 5 - Postfach 14 8701 Leoben Austria

454

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE LINZ Lederergasse 19 - Postfach 481 4010 LINZ Austria

455

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE SALZBURG Georg Wagner-Gasse, 8 5020 SALZBURG Austria

456

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE ST. PÖLTEN Praterstraße 39 - Postfach 275 3100 St. Pölten Austria

457

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

VERIFICATION OFFICE WIEN Gasteigergasse, 2-4 1200 Wien Austria

458

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

SERVICE DE MÉTROLOGIE Rue J. F. Kennedy 7327 STEINSEL Luxembourg

460

Non-automatic weighing instruments

EC verification

Annex II.3

WALSALL METROPOLITAN BOROUGH COUNCIL Challenge Building - Hatherton Road WS1 1YG WALSALL United Kingdom

485

Non-automatic weighing instruments

EC verification

Annex II.3

MANCHESTER CITY COUNCIL Town Hall M60 2JB MANCHESTER United Kingdom

486

Non-automatic weighing instruments

EC verification

Annex II.3

DERBYSHIRE COUNTY COUNCIL Chatsworth Hall - Chesterfield Road DE4 3FW Matlock United Kingdom

487

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF SUTTON Civic Offices - St. Nicholas Way SM1 1EA Sutton United Kingdom

488

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF GREENWICH Riverside House - Woolwich High Street SE18 6DN Woolwich United Kingdom

489

Non-automatic weighing instruments

EC verification

Annex II.3

LINCOLNSHIRE COUNTY COUNCIL County Offices - Newland LN1 1YL LINCOLN United Kingdom

490

Non-automatic weighing instruments

EC verification

Annex II.3

SURREY COUNTY COUNCIL - TRADING STANDARDS SERVICE Vine Court - Chalkpit Lane Surrey Dorking United Kingdom

507

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF MERTON Civic Centre - London Road SM4 5DX Morden United Kingdom

508

Non-automatic weighing instruments

EC verification

Annex II.3

CITY OF LIVERPOOL 62 Great Crosshall Street L3 2AT LIVERPOOL United Kingdom

509

Non-automatic weighing instruments

EC verification

Annex II.3

GATESHEAD METROPOLITAN BOROUGH COUNCIL DEPARTMENT OF HEALTH & CONSUMER SERVICES Civic Center - Regent Street NE8 1HH Gateshead - Tyne & Wear United Kingdom

520

Non-automatic weighing instruments

EC verification

Annex II.3

OLDHAM METROPOLITAN BOROUGH COUNCIL - TRADING STANDARDS DIVISION - ENVIRONMENTAL HEALTH DEPARTMENT North House - 130 Rochdale Road OL1 2JA OLDHAM United Kingdom

521

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF SOUTHWARK

SOUTHWARK TRADING STANDARDS

The Chaplin Centre - Thurlow Street SE17 2DG LONDON United Kingdom

522

Non-automatic weighing instruments

EC verification

Annex II.3

DELEGAÇÃO REGIONAL DA INDÚSTRIA E ENERGIA DE LISBOA E VALE DO TEJO Estrada da Portela - Zambujal 2700 AMADORA Portugal

548

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

DELEGAÇÃO REGIONAL DA INDÚSTRIA E ENERGIA DO NORTE Rua Dr. Alfredo Magalhães 68 - 4o 4000 PORTO Portugal

549

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

DELEGAÇÃO REGIONAL DA INDÚSTRIA E ENERGIA DO CENTRO Rua Câmara Pestana 74 3000 COIMBRA Portugal

550

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

DELEGAÇÃO REGIONAL DA INDÚSTRIA E ENERGIA DO ALGARVE Estrada da Penha 8000 FARO Portugal

551

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

DELEGAÇÃO REGIONAL DA INDÚSTRIA E ENERGIA DO ALENTEJO Zona Industrial - Lote 18 7000 EVORA Portugal

552

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

ST. HELENS METROPOLITAN BOROUGH COUNCIL TRADING STANDARDS SECTION 2nd Floor Wesley House - Corporation Str WA10 1HF St. Helens United Kingdom

553

Non-automatic weighing instruments

EC verification

Annex II.3

VALE OF GLAMORGAN BOROUGH COUNTY COUNCIL 2 - 6 Holton Road CF63 4HD BARRY United Kingdom

559

Non-automatic weighing instruments

EC verification

Annex II.3

CARDIFF COUNTY COUNCIL County Hall - Atlantic Wharf CF1 5UW CARDIFF United Kingdom

561

Non-automatic weighing instruments

EC verification

Annex II.3

RHONDDA CYNON TAFF COUNTY BOROUGH COUNCIL TRADING STANDARDS DIVISION Forest Grove - Treforest CF37 1UB Pontypridd United Kingdom

563

Non-automatic weighing instruments

EC verification

Annex II.3

ANGUS COUNCIL County Buildings - Market Street DD8 3BQ Forfar United Kingdom

564

Non-automatic weighing instruments

EC verification

Annex II.3

DUNDEE CITY COUNCIL Standards House - 296 Strathmore Avenue DD3 6SH DUNDEE United Kingdom

565

Non-automatic weighing instruments

EC verification

Annex II.3

CAERPHILLY COUNTY BOROUGH COUNCIL ENVIRONMENTAL SERVICES DIRECTORATE Civic Centre NP2 2YW Pontllanfraith United Kingdom

566

Non-automatic weighing instruments

EC verification

Annex II.3

BRIDGEND COUNTY BOROUGH COUNCIL TRADING STANDARDS DEPARTMENT Brackla House CF31 1BZ BRIDGEND United Kingdom

567

Non-automatic weighing instruments

EC verification

Annex II.3

LONDON BOROUGH OF RICHMOND UPON THAMES HEALTH AND CONSUMER SERVICES 4 Waldergrave Road TW11 8EN Teddington United Kingdom

568

Non-automatic weighing instruments

EC verification

Annex II.3

FLINTSHIRE COUNTY COUNCIL TRADING STANDARDS DEPARTMENT Shire Hall CH7 6NT Mold United Kingdom

569

Non-automatic weighing instruments

EC verification

Annex II.3

MERTHYR TYDFIL COUNTY BOROUGH COUNCIL TRADING STANDARDS DEPARTMENT Civic Centre CF47 8AN Merthyr United Kingdom

570

Non-automatic weighing instruments

EC verification

Annex II.3

SHETLAND ISLANDS COUNCIL TRADING STANDARDS DEPARTMENT Town Hall - Hillhead ZE1 0HB Lerwick United Kingdom

571

Non-automatic weighing instruments

EC verification

Annex II.3

NATIONAL QUALITY ASSURANCE LTD Gainsborough House - Houghton Hall Park W5 5XZ Houghton Regis, Dunstable United Kingdom

577

Non-automatic weighing instruments

EC declaration of type conformity (guarantee of production quality)

Annex II.2

NORTH LINCOLNSHIRE COUNCIL TRADING STANDARDS DEPARTMENT 1/3 Cliff Gardens DN15 7PH Scunthorpe United Kingdom

578

Non-automatic weighing instruments

EC verification

Annex II.3

CITY OF YORK COUNCIL ENVIRONMENTAL REGULATION DEPARTMENT

ENVIRONMENTAL HEALTH SERVICES AND CONSUMER SERVICES

De Grey House - Exhibition Square YO1 2HE YORK United Kingdom

579

Non-automatic weighing instruments

EC verification

Annex II.3

SCOTTISH BORDERS COUNCIL PROTECTIVE SERVICES DEPARTMENT Newton St. Boswells TD6 0SA MELROSE United Kingdom

580

Non-automatic weighing instruments

EC verification

Annex II.3

CORNWALL COUNTY COUNCIL TRADING STANDARDS DEPARTMENT County Hall TR1 3AY TRURO United Kingdom

581

Non-automatic weighing instruments

EC verification

Annex II.3

ABERDEENSHIRE COUNCIL Woodhill House Annexe - Westbourne Road AB9 2LU ABERDEEN United Kingdom

582

Non-automatic weighing instruments

EC verification

Annex II.3

CITY AND COUNTY OF SWANSEA TRADING STANDARDS DIVISION - ENVIRONMENTAL HEALTH AND TRADING STANDARDS DEPARTMENT Guildhall FA1 3SN SWANSEA United Kingdom

584

Non-automatic weighing instruments

EC verification

Annex II.3

PEMBROKESHIRE COUNTY COUNCIL HOUSING AND REGULATORY SERVICES DEPARTMENT Cambria House SA61 2DN Haverfordwest United Kingdom

585

Non-automatic weighing instruments

EC verification

Annex II.3

WREXHAM COUNTY BOROUGH COUNCIL TRADING STANDARDS DEPARTMENT Ruthin Road LL13 7TY WREXHAM United Kingdom

586

Non-automatic weighing instruments

EC verification

Annex II.3

NORTH EAST LINCOLNSHIRE COUNCIL TRADING STANDARDS DEPARTMENT King Edwards Street DN31 3LU GRIMSBY United Kingdom

587

Non-automatic weighing instruments

EC verification

Annex II.3

CONWY COUNTY BOROUGH COUNCIL - PUBLIC PROTECTION Civic offices LL29 8AR Colwyn Bay United Kingdom

591

Non-automatic weighing instruments

EC verification

Annex II.3

CARMARTHENSHIRE COUNTY COUNCIL TRADING STANDARDS DIVISION County Hall SA31 1JP Carmarthen United Kingdom

592

Non-automatic weighing instruments

EC verification

Annex II.3

CITY OF GLASGOW ENVIRONMENTAL SERVICES DEPARTMENT - CALIBRATION AND TEST CENTRE 67 Portman Street G41 1EG GLASGOW United Kingdom

593

Non-automatic weighing instruments

EC verification

Annex II.3

THE EAST RIDING OF YORKSHIRE COUNCIL Council offices - Church Street DN14 5BG GOOLE United Kingdom

594

Non-automatic weighing instruments

EC verification

Annex II.3

THE CITY OF EDINBURGH COUNCIL DEPARTMENT OF ENVIRONMENTAL & CONSUMER SERVICES Chesser House - 500 Gorgie Road EH11 3YJ EDINBURGH United Kingdom

595

Non-automatic weighing instruments

EC verification

Annex II.3

SOUTH GLOUCESTERSHIRE COUNCIL COUNCIL OFFICES Castle Street - Thornbury BS12 1HF BRISTOL United Kingdom

596

Non-automatic weighing instruments

EC verification

Annex II.3

KINGSTON UPON HULL CITY COUNCIL - TRADING STANDARDS SERVICE TECHNICAL SERVICES DEPARTMENT Kingston House - Bond Street HU1 3ER HULL United Kingdom

597

Non-automatic weighing instruments

EC verification

Annex II.3

MIDLOTHIAN COUNCIL Midlothian House - Buccleuch Street EH22 1DN Dalkieth United Kingdom

601

Non-automatic weighing instruments

EC verification

Annex II.3

ABERDEEN CITY COUNCIL ENVIRONMENTAL & CONSUMER PROTECTION SERVICES 77-79 King Street AB24 5AB ABERDEEN United Kingdom

602

Non-automatic weighing instruments

EC verification

Annex II.3

THE MORAY COUNCIL TRADING STANDARDS 232 High Street TV30 1DJ Elgin United Kingdom

605

Non-automatic weighing instruments

EC verification

Annex II.3

BLAENAU GWENT COUNTY BOROUGH COUNCIL

CIVIC CENTRE

Ebbw Vale NP3 6XB GWENT United Kingdom

606

Non-automatic weighing instruments

EC verification

Annex II.3

CYNGOR SIR CEREDIGION COUNTY COUNCIL DEPARTMENT OF ENVIRONMENTAL SERVICES AND HOUSING Neuadd Cyngor Ceredigion - Penmorfa SA46 0PA Aberaeron United Kingdom

610

Non-automatic weighing instruments

EC verification

Annex II.3

DENBIGHSHIRE COUNTY COUNCIL COUNCIL OFFICES Wynnstay Road OO15 1YN Ruthin United Kingdom

611

Non-automatic weighing instruments

EC verification

Annex II.3

MIDDLESBROUGH BOROUGH COUNCIL Public Protection & Trading Standards Melrose House - Melrose Street TS1 2YW MIDDLESBROUGH United Kingdom

627

Non-automatic weighing instruments

EC verification

Annex II.3

FIFE COUNCIL TRADING STANDARDS SERVICES North Street - Glenrothes KY7 5LT Fife United Kingdom

628

Non-automatic weighing instruments

EC verification

Annex II.3

HIGHLAND COUNCIL PROTECTIVE SERVICES DEPARTMENT - COUNCIL OFFICES Glenurquart Road IV3 5NX Iverness United Kingdom

629

Non-automatic weighing instruments

EC verification

Annex II.3

MONMOUTHSHIRE COUNTY COUNCIL Trading Standards Department County Hall NP44 2XH CWMBRAN United Kingdom

630

Non-automatic weighing instruments

EC verification

Annex II.3

DUMFRIES AND GALLOWAY COUNCIL

Council Offices

English Street DG1 2DD DUMFRIES United Kingdom

631

Non-automatic weighing instruments

EC verification

Annex II.3

POWYS COUNTY COUNCIL Trading Standards Department - County Hall Llandrindod Wells POWYS United Kingdom

632

Non-automatic weighing instruments

EC verification

Annex II.3

MINISTRY OF DEVELOPMENT METROLOGY DEP. CANNING SQUARE 10181 ATHENS Greece

652

Non-automatic weighing instruments

EC Type-examination

EC verification

EC unit verification

Annex II.1

Annex II.3

Annex II.4

SALFORD CITY COUNCIL

CITY OF SALFORD

ENVIRONMENTAL AND CONSUMER SERVICES Crompton House 100 - Chorley Road M27 6 ES Manchester United Kingdom

658

Non-automatic weighing instruments

EC verification

Annex II.3

ISLE OF ANGLESEY COUNTY COUNCIL Swyddfa'r SirLlangenfni LL77 7TW ANGLESEY United Kingdom

659

Non-automatic weighing instruments

EC verification

Annex II.3

COLEGIO OFICIAL DE PESADORES Y MEDIDORES PUBLICOS DE BARCELONA c/ Pas de Sota Muralla, s/n E-08003 BARCELONA Spain

667

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

SEFTON METROPOLITAN BOROUGH COUNCIL Balliol House - Stanley Preccinct L20 3AH BOOTLE United Kingdom

668

Non-automatic weighing instruments

EC verification

Annex II.3

ORKNEY ISLANDS COUNCIL - COUNCIL OFFICES School Place - Kirkwall KW15 1NY ORKNEY United Kingdom

669

Non-automatic weighing instruments

EC verification

Annex II.3

NEATH PORT TALBOT COUNTY BOROUGH COUNCIL DEVELOPMENT AND CONSUMER SERVICES Civic Centre SA11 3QZ NEATH United Kingdom

670

Non-automatic weighing instruments

EC verification

Annex II.3

ENVIRONMENTAL HEALTH & CONSUMER SERVICES, Bournemouth Borough Council, Community Services Directorate Town Hall - St Stephens Road BH2 6LI BOURNEMOUTH United Kingdom

677

Non-automatic weighing instruments

EC verification

Annex II.3

TORBAY COUNCIL - Divisional Trading Standards Office St. Marychurch Town Hall TQ1 3SA TORQUAY United Kingdom

684

Non-automatic weighing instruments

EC verification

Annex II.3

PLYMOUTH CITY COUNCIL - Environment & Consumer Protection Civic Centre PL1 2EW PLYMOUTH United Kingdom

693

Non-automatic weighing instruments

EC verification

Annex II.3

BOROUGH OF POOLE CONSUMER PROTECTION SERVICES 1 New Fields Business Park - Stinsford R BH17 0NF Poole United Kingdom

696

Non-automatic weighing instruments

EC verification

Annex II.3

BRISTOL CITY COUNCIL HEALTH & ENVIRONMENTAL SERVICES Brunel House - St George's Road BS1 5UY BRISTOL United Kingdom

701

Non-automatic weighing instruments

EC verification

Annex II.3

HALTON BOROUGH COUNCIL ENVIRONMENTAL SERVICES DEPARTMENT Grosvenor House, Halton Lea Runcorn - Cheshire United Kingdom

702

Non-automatic weighing instruments

EC verification

Annex II.3

NEWPORT COUNTY BOROUGH COUNCIL TRADING STANDARDS DEPARTMENT Stephenson Street NP9 0RB Newport - South Wales United Kingdom

703

Non-automatic weighing instruments

EC verification

Annex II.3

WORCESTERSHIRE COUNTY COUNCIL TRADING STANDARDS SERVICE 29-30 Foregate Street WR1 1DS WORCESTER United Kingdom

704

Non-automatic weighing instruments

EC verification

Annex II.3

CITY OF STOKE-ON-TRENT Housing and Consumer Protection Department - Trading Standards Service PO Box 634, Civic Centre - Glebe Street ST4 1RJ STOKE-ON-TRENT United Kingdom

707

Non-automatic weighing instruments

EC verification

Annex II.3

LEGAL METROLOGY SERVICE - NATIONAL STANDARDS AUTHORITY OF IRELAND Glasnevin 9 DUBLIN Ireland

709

Non-automatic weighing instruments

EC Type-examination

EC verification

EC unit verification

Annex II.1

Annex II.3

Annex II.4

KALIBRA NEDERLAND B.V. Kalfjeslaan 66 2628 AJ DELFT Netherlands

710

Non-automatic weighing instruments

EC verification

Annex II.3

TAMESIDE METROPOLITAN BOROUGH COUNCIL ENVIRONMENTAL HEALTH & CONSUMER SERVICES DIVISION Wellington Road - Ashton-under-Lyne OL6 6DL Tameside United Kingdom

711

Non-automatic weighing instruments

EC verification

Annex II.3

WARRINGTON BOROUGH COUNCIL Technical Services Directorate - Environmental Health & Trading Standards Division Palmyra House - Palmyra Square North WA1 1JN WARRINGTON United Kingdom

728

Non-automatic weighing instruments

EC verification

Annex II.3

TELENOR COMMA AB 19483 Upplands Väsby Sweden

811

Non-automatic weighing instruments

EC verification

Annex II.3

BUTIKSSERVICE I ÖST AB 60374 NORRKÖPING Sweden

813

Non-automatic weighing instruments

EC verification

Annex II.3

METROPOLITAN BOROUGH OF BURY Maple House - 8 Haymarket Street BL9 0AF BURY United Kingdom

846

Non-automatic weighing instruments

EC verification

Annex II.3

BATH & NORTH EAST SOMERSET DISTRICT COUNCIL The Guildhall - High Street BA1 5AW BATH United Kingdom

847

Non-automatic weighing instruments

EC verification

Annex II.3

BLACKBURN AND DARWEN BOROUGH COUNCIL - THE TECHNICAL STANDARDS SERVICE Town Hall BB1 7DY Blackburn United Kingdom

881

Non-automatic weighing instruments

EC verification

Annex II.3

EASTERN REGION COORDINATION OF TRADING STANDARDS (ERCOTS)

SUFFOLK COUNTY COUNCIL - TRADING S

St Edmund House, Rope Walk IP4 1LZ Ipswich United Kingdom

922

Non-automatic weighing instruments

EC verification

Annex II.3

LABORATORIO DE ENSAYOS METROLÓGICOS S.L. Avenida Can Sucarrats, 110 - Nave 11/Po 08191 Rubí (Barcelona) Spain

962

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

DIRECCION GENERAL DE INDUSTRIA Y ENERGIA Avenida de Anaga 35 38071 SANTA CRUZ DE TENERIFE Spain

974

Non-automatic weighing instruments

EC verification

Annex II.3

INGENIERIA DE GESTION INDUSTRIAL, S.L. C/ Marques de Mudela, 8 13600 ALCAZAR DE SAN JUAN Spain

1028

Non-automatic weighing instruments

EC verification

EC unit verification

Annex II.3

Annex II.4

CHAPTER 12

MOTOR VEHICLES

EC-Switzerland MRA - Chapter 12 & 13 of Annex 1 - EU Authorities responsible for type-approval, technical services and testing bodies

>PLATZ FÜR EINE TABELLE>

CHAPTER 13

AGRICULTURAL OR FORESTRY TRACTORS

EC-Switzerland MRA - Chapter 12 & 13 of Annex 1 - EU Authorities responsible for type-approval, technical services and testing bodies

>PLATZ FÜR EINE TABELLE>

22003D0128