EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document L:2022:075:FULL
Official Journal of the European Union, L 075, 7 March 2022
Official Journal of the European Union, L 075, 7 March 2022
Official Journal of the European Union, L 075, 7 March 2022
ISSN 1977-0677 |
||
Official Journal of the European Union |
L 75 |
|
English edition |
Legislation |
Volume 65 |
|
|
|
(1) Text with EEA relevance. |
EN |
Acts whose titles are printed in light type are those relating to day-to-day management of agricultural matters, and are generally valid for a limited period. The titles of all other Acts are printed in bold type and preceded by an asterisk. |
II Non-legislative acts
DECISIONS
7.3.2022 |
EN |
Official Journal of the European Union |
L 75/1 |
COMMISSION IMPLEMENTING DECISION (EU) 2022/381
of 4 March 2022
amending Implementing Decision (EU) 2019/450 as regards the publication of references of European Assessment Documents for reinforced high density EPS structural panel system for building units and other construction products
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (1), and in particular Article 22 thereof,
Whereas:
(1) |
In accordance with Regulation (EU) No 305/2011, Technical Assessment Bodies are to use methods and criteria provided in European Assessment Documents, the references of which have been published in the Official Journal of the European Union, for assessing performance of construction products covered by those documents in relation to their essential characteristics. |
(2) |
In accordance with Article 19 of Regulation (EU) No 305/2011, following several requests by manufacturers for European Technical Assessments, the organisation of Technical Assessment Bodies has drawn up and adopted 10 European Assessment Documents. |
(3) |
The European Assessment Documents drawn up and adopted by the organisation of Technical Assessment Bodies relate to the following construction products:
|
(4) |
The European Assessment Documents drawn up and adopted by the organisation of Technical Assessment Bodies satisfy the demands to be met in relation to the basic requirements for construction works set out in Annex I to Regulation (EU) No 305/2011. It is therefore appropriate to publish the references of those European Assessment Documents in the Official Journal of the European Union. |
(5) |
The list of references of European Assessment Documents is published by Commission Implementing Decision (EU) 2019/450 (2). For reasons of clarity, references of new European Assessment Documents should be added to that list. |
(6) |
Implementing Decision (EU) 2019/450 should therefore be amended accordingly. |
(7) |
In order to enable the use of the European Assessment Documents as early as possible, this Decision should enter into force on the day of its publication, |
HAS ADOPTED THIS DECISION:
Article 1
The Annex to Implementing Decision (EU) 2019/450 is amended in accordance with the Annex to this Decision.
Article 2
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Done at Brussels, 4 March 2022.
For the Commission
The President
Ursula VON DER LEYEN
(2) Commission Implementing Decision (EU) 2019/450 of 19 March 2019 on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council (OJ L 77, 20.3.2019, p. 78).
ANNEX
In the Annex, the following rows are inserted in sequential order following the order of the reference numbers:
‘340287-00-0203 |
Reinforced high density EPS structural panel system for building units’ |
‘340452-00-0204 |
Building kit based on massive panels with metal frame structure’ |
‘090040-00-0404 |
Cantilevered structural glass railing/balustrade’ |
‘041561-00-1201 |
In-situ formed thermal insulation made of mineral based foam’ |
‘333220-00-0601 |
Pre-installed anchor for fastening concrete façade elements’ |
‘332589-00-0601 |
Wire loop system for the connection of precast and in-situ concrete elements’ |
‘060013-00-0802 |
Kit for system chimneys with outer wall made of concrete and clay/ceramic flue liner in combination with plastic or metal flue liner and additional duct’ |
‘360032-00-0803 |
Liner, made of glass fibres, mineral and organic substances used for relining of ducts for ventilation purposes’ |
‘360001-01-0803 |
Ventilation system made of mineral wool with facings on outside and inside’ |
‘190019-00-0502 |
Cement-based floor screeds for internal and external applications’. |