This document is an excerpt from the EUR-Lex website
Document 32025R0223
Commission Implementing Regulation (EU) 2025/223 of 6 February 2025 amending Implementing Regulation (EU) 2022/1423 as regards minor changes to the Union authorisation for the biocidal product family Hydrogen Peroxide Family 1
Commission Implementing Regulation (EU) 2025/223 of 6 February 2025 amending Implementing Regulation (EU) 2022/1423 as regards minor changes to the Union authorisation for the biocidal product family Hydrogen Peroxide Family 1
Commission Implementing Regulation (EU) 2025/223 of 6 February 2025 amending Implementing Regulation (EU) 2022/1423 as regards minor changes to the Union authorisation for the biocidal product family Hydrogen Peroxide Family 1
C/2025/708
OJ L, 2025/223, 12.2.2025, ELI: http://data.europa.eu/eli/reg_impl/2025/223/oj (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
In force
|
Official Journal |
EN L series |
|
2025/223 |
12.2.2025 |
COMMISSION IMPLEMENTING REGULATION (EU) 2025/223
of 6 February 2025
amending Implementing Regulation (EU) 2022/1423 as regards minor changes to the Union authorisation for the biocidal product family ‘Hydrogen Peroxide Family 1’
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products (1), and in particular Article 50(2) thereof,
Whereas:
|
(1) |
On 22 July 2022, Commission Implementing Regulation (EU) 2022/1423 (2) granted a Union authorisation, under number EU-0024303-0000, to Ecolab Deutschland GmbH for the making available on the market and use of the biocidal product family ‘Hydrogen Peroxide Family 1’. That Regulation was later amended by Commission Implementing Regulation (EU) 2024/2209 (3), which introduced administrative and minor changes to the authorisation. |
|
(2) |
Commission Implementing Regulation (EU) No 354/2013 (4) lays down the procedural rules for the different categories of changes referred to in Article 50(3) of Regulation (EU) No 528/2012. Upon receipt of an opinion from the European Chemicals Agency (‘the Agency’) on an application from an authorisation holder of a Union authorisation seeking to change any of the information submitted for the initial application for authorisation, the Commission is to decide whether the conditions of Article 19 or, where relevant, Article 25 of Regulation (EU) No 528/2012, are still met and whether the terms and conditions of the authorisation need to be amended. |
|
(3) |
On 24 April 2024, Ecolab Deutschland GmbH submitted an application to the Agency, in accordance with Article 12(1) of Implementing Regulation (EU) No 354/2013, for minor changes to the Union authorisation for the biocidal product family ‘Hydrogen Peroxide Family 1’, as referred to in Title 2 of the Annex to that Regulation. Ecolab Deutschland GmbH applied for the following changes, concerning five uses of the products in meta summary of biocidal product characteristics 5: (i) amending the contact time from 30 minutes to 60 minutes for bacterial spores in clean conditions; (ii) amending the contact time from 5 min to 60 min for Clostridium difficile spores in clean conditions; and (iii) removing the claim of 60 minutes for bacterial spores in dirty conditions. The application was recorded in the register for biocidal products under case number BC-AJ094453-41. |
|
(4) |
On 20 September 2024, the Agency submitted to the Commission an opinion of the Biocidal Products Committee (5) on the application for minor changes, in accordance with Article 12(4) of Implementing Regulation (EU) No 354/2013, together with a revised summary of the biocidal product characteristics and a revised assessment report. In the opinion, the Agency concludes that after the implementation of the changes sought by the authorisation holder, the conditions of Article 19 of Regulation (EU) No 528/2012 are still met. |
|
(5) |
On 11 October 2024, the Agency transmitted to the Commission the revised summary of biocidal product characteristics of the Union authorisation for the biocidal product family ‘Hydrogen Peroxide Family 1’ in all official languages of the Union covering the minor changes applied for, in accordance with Article 12(6) of Implementing Regulation (EU) No 354/2013. |
|
(6) |
The Commission concurs with the opinion of the Agency and therefore considers it appropriate to amend the Union authorisation for the biocidal product family ‘Hydrogen Peroxide Family 1’ to introduce the minor changes requested by Ecolab Deutschland GmbH. |
|
(7) |
Except for the amendments regarding the minor changes, all other information included in the summary of the biocidal product characteristics of ‘Hydrogen Peroxide Family 1’ as set out in the Annex to Implementing Regulation (EU) 2022/1423 remains unchanged. |
|
(8) |
In order to enhance clarity and to ease the access of users and interested parties to the final consolidated version of the summary of biocidal product characteristics which is to be published by the Agency, the Annex to Implementing Regulation (EU) 2022/1423 should be replaced in its entirety. Due to a change in the format used for the generation of the summary of biocidal product characteristics in the register for biocidal products in February 2024, the summary of biocidal product characteristics in that Annex should also include some minor editorial and layout changes. |
|
(9) |
Implementing Regulation (EU) 2022/1423 should therefore be amended accordingly, |
HAS ADOPTED THIS REGULATION:
Article 1
The Annex to Implementing Regulation (EU) 2022/1423 is replaced by the text set out in the Annex to this Regulation.
Article 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 6 February 2025.
For the Commission
The President
Ursula VON DER LEYEN
(1) OJ L 167, 27.6.2012, p. 1; ELI: http://data.europa.eu/eli/reg/2012/528/oj.
(2) Commission Implementing Regulation (EU) 2022/1423 of 22 July 2022 granting a Union authorisation for the biocidal product family ‘Hydrogen Peroxide Family 1’ (OJ L 222, 26.8.2022, p. 1; ELI: http://data.europa.eu/eli/reg_impl/2022/1423/oj).
(3) Commission Implementing Regulation (EU) 2024/2209 of 5 September 2024 amending Implementing Regulation (EU) 2022/1423 as regards administrative and minor changes to the Union authorisation for the biocidal product family Hydrogen Peroxide Family 1 (OJ L, 2024/2209, 11.9.2024, ELI: http://data.europa.eu/eli/reg_impl/2024/2209/oj).
(4) Commission Implementing Regulation (EU) No 354/2013 of 18 April 2013 on changes of biocidal products authorised in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 109, 19.4.2013, p.4; ELI: http://data.europa.eu/eli/reg_impl/2013/354/oj).
(5) Opinion of the Biocidal Products Committee (BPC) of 19 September 2024 on the minor change of the Union authorisation of the biocidal product family Hydrogen Peroxide Family 1, ECHA/BPC/445/2024, https://echa.europa.eu/documents/10162/79839763/hydrogen_peroxide_fam_1_ua-mic_bc-AJ094453-41_final_bpc_opinion_en.pdf/e7a69440-c1e0-bcc4-0ca8-88138895fef0?t=1726819953228.
ANNEX
SUMMARY OF PRODUCT CHARACTERISTICS FOR A BIOCIDAL PRODUCT FAMILY
Hydrogen Peroxide Family 1
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
PT04: Food and feed area
PT03: Veterinary hygiene
PT01: Human hygiene
Authorisation number EU-0024303-0000
R4BP asset number EU-0024303-0000
PART I
FIRST INFORMATION LEVEL
1. ADMINISTRATIVE INFORMATION
1.1. Family name
|
Name |
Hydrogen Peroxide Family 1 |
1.2. Product type(s)
|
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene PT01: Human hygiene |
1.3. Authorisation holder
|
Name and address of the authorisation holder |
Name |
Ecolab Deutschland GmbH |
|
Address |
Ecolab Allee 1 40789 Monheim am Rhein DE |
|
|
Authorisation number |
|
EU-0024303-0000 |
|
R4BP asset number |
|
EU-0024303-0000 |
|
Date of the authorisation |
15 September 2022 |
|
|
Expiry date of the authorisation |
31 October 2032 |
|
1.4. Manufacturer(s) of the product
|
Name of manufacturer |
Ecolab Europe GmbH |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Address of manufacturer |
Richtistrasse 7 8304 Walliselen Switzerland |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Location of manufacturing sites |
|
1.5. Manufacturer(s) of the active substance(s)
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Evonik Degussa Antwerpen NV |
||
|
Address of manufacturer |
Tijsmanstunnel West 2040 Antwerpen Belgium |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Evonik Degussa GmbH |
||
|
Address of manufacturer |
Untere Kanalstr. 3 79618 Rheinfelden Germany |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Evonik Peroxid GmbH |
||
|
Address of manufacturer |
Industriestraβe 1 9721 Weiβenstein Austria |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Evonik Peroxide Netherlands BV |
||
|
Address of manufacturer |
Oosterhorn 14 9936 HD Farmsum Netherlands (the) |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Belinka Perkemija D.O.O |
||
|
Address of manufacturer |
Zasavska cesta 95 1231 Ljubljana-Črnuče Slovenia |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Solvay Chemie SA |
||
|
Address of manufacturer |
Rue Solvay 39 B-5190 Jemeppe-sur-Sambre Belgium |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Solvay Chimica Italia S.p.A |
||
|
Address of manufacturer |
Via Piave 6 I-57013 Rosignano Solvay LI Italy |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Solvay Chemicals GmbH |
||
|
Address of manufacturer |
Köthensche Strasse 1-3 D-06406 Bernburg Germany |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Solvay Interox Limited |
||
|
Address of manufacturer |
Baronet Road WA4 6HB Warrington Cheshire United Kingdom of Great Britain and Northern Ireland (the) |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Solvay Chemicals Finland OY |
||
|
Address of manufacturer |
Yrjonojantie 2 45910 Voikkaa Finland |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Solvay Interox Produtos Peroxidados SA |
||
|
Address of manufacturer |
Rua Eng. Clement Dumoulin P-2625-106 Povoa de Santa Iria Portugal |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Kemira Rotterdam BV |
||
|
Address of manufacturer |
Moezelweg 151 3198 LS Europoort Rotterdam Netherlands (the) |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Kemira Chemical Oy |
||
|
Address of manufacturer |
Typpitie PL 171 90101 Oulu Finland |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Kemira Kemi AB |
||
|
Address of manufacturer |
Industrigatan 83 25109 Helsingborg Sweden |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
ARKEMA France – USINE DE JARRIE |
||
|
Address of manufacturer |
Route National 85, BP 1 38560 JARRIE France |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
ARKEMA GMBH – NIEDERLASSUNG LEUNA |
||
|
Address of manufacturer |
Am Haupttor, Bau 2410 06237 LEUNA Germany |
||
|
Location of manufacturing sites |
|
|
Active substance |
Hydrogen peroxide |
||
|
Name of manufacturer |
Ecolab Europe GmbH |
||
|
Address of manufacturer |
Ecolab-Allee 1 40789 Monheim am Rhein Germany |
||
|
Location of manufacturing sites |
|
2. PRODUCT FAMILY COMPOSITION AND FORMULATION
2.1. Qualitative and quantitative information on the composition of the family
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1 - 36,75 % (w/w) |
|
N-propanol |
Propan-1-ol |
Non-Active substance |
71-23-8 |
200-746-9 |
0 - 17,5 % (w/w) |
|
Citric acid monohydrate |
2-hydroxypropane -1,2,3-tricarboxylic acid |
Non-Active substance |
5949-29-1 |
201-069-1 |
0 - 0,9 % (w/w) |
|
Phenoxyethanol |
2-Phenoxyethanol |
Non-Active substance |
122-99-6 |
204-589-7 |
0 - 0,9 % (w/w) |
|
Sodium lauryl Sulphate |
Sodium dodecyl sulphate |
Non-Active substance |
151-21-3 |
205-788-1 |
0 - 3,88 % (w/w) |
|
L-Glutamic acid, N-coco acyl derivs., monosodium salts |
Sodium;(4S)-4-amino-5-hydroxy-5-oxopentanoate |
Non-Active substance |
68187-32-6 |
269-087-2 |
0 - 2 % (w/w) |
|
Sulfuric acid, mono-C12-14-alkyl esters, ammonium salts (Texapon ALS) |
Sulfuric acid, mono-C12-14-alkyl esters, ammonium salts |
Non-Active substance |
90583-11-2 |
292-209-0 |
0 - 1,12 % (w/w) |
|
Phosphoric acid |
Orthophosphoric acid |
Non-Active substance |
7664-38-2 |
231-633-2 |
0 - 1,5 % (w/w) |
|
Nitric acid |
Nitric acid |
Non-Active substance |
7697-37-2 |
231-714-2 |
0 - 3,71 % (w/w) |
|
Alcohol EO phosphate ester |
Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, mono-C8-10-alkyl ethers, phosphates |
Non-Active substance |
68130-47-2 |
|
0 - 14,625 % (w/w) |
|
Alkylpolyglycoside C8-C10 |
(3R,4S,5S,6R)-2-decoxy-6-(hydroxymethyl)oxane-3,4,5-triol |
Non-Active substance |
68515-73-1 |
500-220-1 |
0 - 6,35 % (w/w) |
|
Alcohols, C10-C16 ethoxylated propoxylated (Dehydol 980) |
Alcohols, C10-C16 ethoxylated propoxylated |
Non-Active substance |
69227-22-1 |
|
0 - 3 % (w/w) |
|
Capryleth-9 Carboxylic acid (mixture of alkyl ether carboxylic acid) |
Poly(oxy-1,2-ethanediyl), .alpha.-(carboxymethyl)-.omega.-(octyloxy)- (4-11 EO) |
Non-Active substance |
53563-70-5 |
|
0 - 2,15 % (w/w) |
|
Hexeth-4 Carboxylic Acid (mixture of alkyl ether carboxylic acid) |
Poly(oxy-1,2-ethanediyl), .alpha.-(carboxymethyl)-.omega.-(hexyloxy)- (3 EO) |
Non-Active substance |
105391-15-9 |
|
0 - 0,62 % (w/w) |
2.2. Type(s) of formulation
|
Formulation type(s) |
AL Any other liquid GW Water soluble gel SL Soluble concentrate |
PART II.
SECOND INFORMATION LEVEL - META SPC(S)
1. META SPC 1 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 1 identifier
|
Identifier |
Meta SPC: META SPC 1 |
1.2. Suffix to the authorisation number
|
Number |
1-1 |
1.3. Product type(s)
|
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
2. META SPC 1 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 1
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
6 - 6,6 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 1
|
Formulation type(s) |
AL Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1
|
Hazard statements |
H319: Causes serious eye irritation. |
|
Precautionary statements |
P264: Wash hands thoroughly after handling. P280: Wear eye protection. P280: Wear face protection. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice. P337+P313: If eye irritation persists: Get medical attention. |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of life sciences cleanrooms by spraying using trigger sprayer and dry wipe
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: No data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data |
||||||||||
|
Field(s) of use |
indoor use |
||||||||||
|
Application method(s) |
Method: Spraying using trigger sprayer and dry wipe Detailed description: Disinfection of small surfaces, materials and equipment in life sciences cleanrooms, classified as grade A to D according to Good Manufacturing Practice (GMP) EU classification, and supporting environments. Contact times for spraying at 20oC in clean conditions:
Contact times for spraying and wiping at 20oC in clean conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): Ready to use (RTU) product Number and timing of application: Application frequency: up to twice per day per room |
||||||||||
|
Category(ies) of users |
professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding High Density Poly Ethylene (HDPE) or Poly Ethylene (PE) Bottle, 1-5 L Light precluding Polypropylene and Polyethylene (PP+PE) spray bottle, 0.5 -5 L |
4.1.1. Use-specific instructions
For optimum results, hold the bottle upright and spray from a distance of 10 cm to 20 cm. Spray the product onto a dry wipe and wipe small surfaces such as worktops and equipment, or spray the product onto the surface, wipe the surface with a clean, dry wipe and let air dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
4.1.2. Use-specific risk mitigation measures
The use of eye protection while handling the product is mandatory.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 1.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 1.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 1.
4.2. Use description
Table 2
Disinfection of life sciences cleanrooms by mopping using flat mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||
|
Where relevant, an exact description of the authorised use |
- |
||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data |
||||
|
Field(s) of use |
indoor use |
||||
|
Application method(s) |
Method: Mopping using a flat mop and bucket Detailed description: Disinfection of floors in life sciences cleanrooms, classified as grade A to D according to Good Manufacturing Practice (GMP) EU classification, and supporting environments. Contact times for mopping at 20oC in clean conditions:
|
||||
|
Application rate(s) and frequency |
Application rate: Application rate: 20 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||
|
Category(ies) of users |
Professional |
||||
|
Pack sizes and packaging material |
Light precluding HDPE or PE Bottle, 0.5 -5 L |
4.2.1. Use-specific instructions
Apply to surfaces by mopping and let air dry.
4.2.2. Use-specific risk mitigation measures
The use of eye protection while handling the product is mandatory.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory for professionals applying the product and for other professionals present in the treated area. An air purifying respirator with helmet/hood/mask (TH1/TM1), or a half/full mask with combination filter gas/P2 is at least required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). For repeated application or re-entry into the room, the professional needs to follow the same risk mitigation measures as for the first application in the room.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 1.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 1.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 1.
4.3. Use description
Table 3
Disinfection of life sciences cleanrooms by wiping using impregnated RTU wipes
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||
|
Where relevant, an exact description of the authorised use |
- |
||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data |
||||
|
Field(s) of use |
indoor use |
||||
|
Application method(s) |
Method: Wiping using impregnated RTU wipes Detailed description: Disinfection of small surfaces, materials and equipment in life sciences cleanrooms, classified as grade A to D according to Good Manufacturing Practice (GMP) EU classification, and supporting environments. Contact times for wiping at 20oC in clean conditions:
|
||||
|
Application rate(s) and frequency |
Application rate: Application rate: 1 wipe per m2 (corresponds to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||
|
Category(ies) of users |
professional |
||||
|
Pack sizes and packaging material |
Light precluding PP or PET/PE or EVA/PP or Aluminum/PE Pouch or PE Pouch with 10-100 impregnated 45% polyester / 55% cellulose blend wipes (wipe size: 200x200 mm) Light precluding PP or PET/PE or EVA/PP or Aluminum/PE Pouch or PE Pouch with 10-100 impregnated 100% polyester wipes (wipe size: 200x200 mm). Light precluding PP or PET/PE or EVA/PP or Aluminum/PE Pouch or PE Pouch with 10-100 impregnated 100% polyester wipes (wipe size: 300x300 mm) |
4.3.1. Use-specific instructions
Allow surface to air dry after using the product. Close container when not in use. Do not use wipes which have become dehydrated. Used wipes must be disposed of in a closed container.
4.3.2. Use-specific risk mitigation measures
Avoid hand to eye transfer.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 1.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 1.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 1.
4.4. Use description
Table 4
Disinfection of life sciences cleanrooms by mopping using impregnated RTU mop wipes
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||
|
Where relevant, an exact description of the authorised use |
- |
||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data |
||||
|
Field(s) of use |
indoor use |
||||
|
Application method(s) |
Method: Mopping using impregnated RTU mop wipes Detailed description: Disinfection of floors in life sciences cleanrooms, classified as grade A to D according to Good Manufacturing Practice (GMP) EU classification, and supporting environments. Contact times for mopping at 20oC in clean conditions:
|
||||
|
Application rate(s) and frequency |
Application rate: Application rate: 1 wipe per m2 (corresponds to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||
|
Category(ies) of users |
professional |
||||
|
Pack sizes and packaging material |
Light precluding PP or PET/PE or EVA/PP or Aluminum/PE Pouch or PE Pouch with 10-100 impregnated 45% polyester / 55% cellulose blend wipes (wipe size: 420x250 mm). Light precluding PP or PET/PE or EVA/PP or Aluminum/PE Pouch or PE Pouch with 10-100 impregnated 100% polyester wipes (wipe size: 300x300 mm). |
4.4.1. Use-specific instructions
Allow surface to air dry after using the product. Close container when not in use. Do not use wipes which have become dehydrated. Used wipes must be disposed of in a closed container.
4.4.2. Use-specific risk mitigation measures
Avoid hand to eye transfer.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory for professionals applying the product and for other professionals present in the treated area. An air purifying respirator with helmet/hood/mask (TH1/TM1), or a half/full mask with combination filter gas/P2 is at least required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). For repeated application or re-entry into the room, the professional needs to follow the same risk mitigation measures as for the first application in the room.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 1.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 1.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 1.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 1
5.1. Instructions for use
Always read the label or leaflet before use and follow all the instructions. Clean surface before applying the product. Product should be applied to a clean dry surface. Wet surface completely using the product. Do not rinse after use. Do not use on surfaces sensitive to oxidative agents such as marble, copper or brass.
5.2. Risk mitigation measures
See use-specific risk mitigation measures of meta SPC 1.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse immediately with plenty of water, including under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention.
In case of skin contact: Rinse with plenty of water.
If swallowed: Rinse mouth. Seek medical attention if symptoms occur.
If inhaled: Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers.
Storage temperature: 0-35°C
Shelf life: 24 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Klercide Sporicidal Low Residue Peroxide |
Market area: EU |
|||||
|
Klerwipe Sporicidal Low Residue Peroxide |
Market area: EU |
||||||
|
ANIOS H2O2 6% IP STERILE |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0001 1-1 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
6 % (w/w) |
||
1. META SPC 2 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 2 identifier
|
Identifier |
Meta SPC: META SPC 2 |
1.2. Suffix to the authorisation number
|
Number |
1-2 |
1.3. Product type(s)
|
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
2. META SPC 2 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 2
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1 - 1 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 2
|
Formulation type(s) |
AL Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2
|
Hazard statements |
|
|
Precautionary statements |
|
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of small and/or large surfaces in industry (e.g. dining areas, bathrooms) by spraying using trigger sprayer and dry wipe and/or by mopping using flat mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data |
||||||||||||||||||
|
Field(s) of use |
indoor use |
||||||||||||||||||
|
Application method(s) |
Method: Spraying using trigger sprayer and dry wipe Detailed description: Disinfection of small surfaces in industry. Contact times for spraying at 20oC in dirty conditions:
Method: Mopping using flat mop and bucket Detailed description: Disinfection of large surfaces in industry. Contact times for mopping at 20oC in dirty conditions:
Method: Spraying using trigger sprayer and dry wipe and mopping using flat mop and bucket. Detailed description: Disinfection of small and large surfaces in industry. Contact times for spraying and mopping at 20oC in dirty conditions:
|
||||||||||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate for spraying: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency for trigger spraying: up to 10 times per day per room Application rate: Application rate for mopping: 20 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency for mopping: up to twice per day per room Application rate: Application rate for spraying: 10 ml/m2; Application rate for mopping: 20 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency for combined trigger spraying and mopping: once per day per room. |
||||||||||||||||||
|
Category(ies) of users |
professional |
||||||||||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Container, 1-100L Light precluding HDPE Jerry can, 1-100L Light precluding HDPE IBC, 600-1000L Light precluding HDPE Drum, 60-220L Light precluding HDPE Bottle, 0,1-5L Light precluding HDPE; PE Spray bottle, 0,5-1L |
4.1.1. Use-specific instructions
Spraying: For optimum results, hold the bottle upright and spray from a distance of 30 cm. Spray the product onto the surface, wait for 5 minutes and then wipe the surface with a clean, dry wipe or let air dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
Mopping: Remove excess water using a dry floor mop. Fill the bucket with ready-to use product and distribute across floor using flat mop. Wait 5 minutes, then wipe the surface with a clean, dry mop or let air dry.
4.1.2. Use-specific risk mitigation measures
For spraying of large surface areas the following applies: The area of the surface to be disinfected (in m2) must not be larger than 1/10 of the room volume (in m3) e.g. in a room of 120 m3 volume, the maximum surface to be disinfected is 12 m2.
For spraying of small surface areas the above specific risk mitigation measure does not apply.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 2.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 2.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 2.
4.2. Use description
Table 2
Disinfection of small surfaces (floors) in industry [(e.g. dining areas, bathrooms)] by mopping using flat mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data |
||||||
|
Field(s) of use |
indoor use |
||||||
|
Application method(s) |
Method: Mopping using flat mop and bucket Detailed description: Disinfection of small surfaces (floors) in industry plants Contact times for mopping at 20oC in dirty conditions:
|
||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 20 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||
|
Category(ies) of users |
professional |
||||||
|
Pack sizes and packaging material |
Light precluding HDPE Container, 1-100 L Light precluding HDPE Jerry can, 1-100 L Light precluding HDPE IBC, 600-1000 L Light precluding HDPE Drum, 60-220 L Light precluding HDPE Bottle, 0,1-5 L |
4.2.1. Use-specific instructions
Fill the bucket with ready-to-use product and distribute across floor using flat mop, afterwards wipe the surface with a clean, dry mop or let air dry.
4.2.2. Use-specific risk mitigation measuresNone
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 2.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 2
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 2
4.3. Use description
Table 3
Disinfection of small food contact surfaces in food and beverage industry by spraying using trigger sprayer and dry wipe
|
Product type |
PT04: Food and feed area |
||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data |
||||||||
|
Field(s) of use |
indoor use |
||||||||
|
Application method(s) |
Method: Spraying using trigger sprayer and dry wipe Detailed description: Disinfection of small surfaces in food processing plants. Contact time for spraying at 20oC in dirty conditions:
Contact times for spraying and wiping at 20oC in dirty conditions:
|
||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||
|
Category(ies) of users |
professional |
||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Container, 1-100 L Light precluding HDPE Jerry can, 1-100 L Light precluding HDPE IBC, 600-1000 L Light precluding HDPE Drum, 60-220 L Light precluding HDPE Bottle, 0,1-5 L Light precluding HDPE; PE Spray bottle, 0,5-1 L |
4.3.1. Use-specific instructions
For optimum results, hold the bottle upright and spray from a distance of 30 cm. Spray the product onto the surface, leave for the required contact time and then either remove excess liquid with dry wipe or let air dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
4.3.2. Use-specific risk mitigation measures
Keep food, feed or beverages away from treated surfaces until dried. Do not use directly on or near food, feed or drinks.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 2.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 2.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 2.
4.4. Use description
Table 4
Disinfection of food contact surfaces in food and beverage industry by spraying using fixed installed sprayer
|
Product type |
PT04: Food and feed area |
||
|
Where relevant, an exact description of the authorised use |
- |
||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||
|
Field(s) of use |
indoor use |
||
|
Application method(s) |
Method: Fixed installed spraying Detailed description: Automated disinfection application in industrial process equipment. Contact time for spraying at 20oC in dirty conditions:
|
||
|
Application rate(s) and frequency |
Application rate: Application rate: 300 L maximum per application Dilution (%): RTU product Number and timing of application: Application frequency: once per week |
||
|
Category(ies) of users |
professional |
||
|
Pack sizes and packaging material |
Light precluding HDPE Container, 1-100 L Light precluding HDPE Jerry can, 1-100 L Light precluding HDPE IBC, 600-1000 L Light precluding HDPE Drum, 60-220 L Light precluding HDPE Bottle, 0,1-5 L |
4.4.1. Use-specific instructions
Use outside food production time, once per week.
4.4.2. Use-specific risk mitigation measures
Application only after the working shift/overnight application.
During spraying application, no person shall be present.
To determine the appropriate re-entry time after application of the product, workplace release measurements using suitable measurement equipment shall be performed upon implementation of the fixed installed spraying, and at regular intervals thereafter (annual intervals recommended), and after any change in relevant boundary conditions. The national regulations for workplace measurements shall be followed. In case of unscheduled maintenance tasks during spraying application, use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 2.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 2.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 2.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2
5.1. Instructions for use
Always read the label or leaflet before use and follow all the instructions. The product should be applied to a dry surface. Wet surface completely using the product. Do not rinse after use. Do not use on surfaces sensitive to oxidative agents such as marble, copper or brass.
5.2. Risk mitigation measures
See use-specific risk mitigation measures of meta SPC 2.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse with plenty of water.
In case of skin contact: Rinse with plenty of water.
If swallowed: Rinse mouth. Seek medical attention if symptoms occur.
If inhaled: Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers.
Storage temperature:0-35 °C
Shelf life: 24 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
DrySan Oxy |
Market area: EU |
|||||
|
Authorisation number |
|
EU-0024303-0002 1-2 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1 % (w/w) |
||
1. META SPC 3 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 3 identifier
|
Identifier |
Meta SPC: META SPC 3 |
1.2. Suffix to the authorisation number
|
Number |
1-3 |
1.3. Product type(s)
|
Product type(s) |
PT04: Food and feed area |
2. META SPC 3 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 3
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
35 - 36,75 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 3
|
Formulation type(s) |
AL - Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3
|
Hazard statements |
H272: May intensify fire; oxidiser. H302: Harmful if swallowed. H315: Causes skin irritation. H318: Causes serious eye damage. H335: May cause respiratory irritation. H412: Harmful to aquatic life with long lasting effects. |
|
Precautionary statements |
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P220: Keep away from clothing or other combustible materials. P261: Avoid breathing vapours. P261: Avoid breathing spray. P264: Wash hands thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P271: Use only outdoors or in a well-ventilated area. P273: Avoid release to the environment. P280: Wear eye protection. P280: Wear face protection. P280: Wear protective gloves. P301+P312: IF SWALLOWED: Call a POISON CENTER if you feel unwell. P330: Rinse mouth. P302+P352: IF ON SKIN: Wash with plenty of water. P332+P313: If skin irritation occurs: Get medical advice. P332+P313: If skin irritation occurs: Get medical attention. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P312: Call a POISON CENTER if you feel unwell. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER. P310: Immediately call a doctor. P321: Specific treatment (see first aid instruction on this label). P362+P364: Take off contaminated clothing and wash it before reuse. P370+P378: In case of fire: Use water to extinguish. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P405: Store locked up. P501: Dispose of contents to in accordance with national regulations. P501: Dispose of container to in accordance with national regulations. |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of food contact surfaces in food and beverage industry by automated dipping or spraying in closed system
|
Product type |
PT04: Food and feed area |
||
|
Where relevant, an exact description of the authorised use |
- |
||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data |
||
|
Field(s) of use |
indoor use |
||
|
Application method(s) |
Method: Automated dipping or spraying in closed system Detailed description: Disinfection of packaging (aseptic filling) by fully automated dipping and spraying (closed process). Packaging disinfection in food, beverage and feed manufacturing (dip and spray application). Contact time for dipping and spraying at 60oC in clean conditions:
|
||
|
Application rate(s) and frequency |
Application rate: Application rate: constant automated dosing Dilution (%): RTU product Number and timing of application: Application frequency: constant automated dosing |
||
|
Category(ies) of users |
Professional |
||
|
Pack sizes and packaging material |
Light precluding HDPE Bulk delivery container, > 1 L - bulk Light precluding HDPE Jerry can, 1-100 L Light precluding HDPE IBC, 600-1000 L Light precluding HDPE Drum, 60-220 L Light precluding HDPE Bottle, 0,1-5 L |
4.1.1. Use-specific instructions
Packaging disinfection in food, beverage and feed manufacturing (spraying or dipping application):
|
— |
Dosing of product directly into the packaging to disinfect or applied into additional steam |
|
— |
Continuous use of the product |
|
— |
Application temperature: 60°C |
|
— |
Application takes place in a closed and vented system. |
Do not rinse after use. After sterilisation, blow-dry the packaging with hot sterile air.
4.1.2. Use-specific risk mitigation measures
Do not breathe vapours/spray.
During operation, ensure adequate ventilation along the machines Local exhaust ventilation (LEV) and in the industrial halls (technical ventilation).
During manual maintenance tasks, ensure adequate ventilation inside the machine (LEV) before opening the doors of the aseptic area.
|
1. |
The product shall only be transferred in closed pipes after mixing and loading. Open product and waste water flows are not allowed. |
|
2. |
Workplace release measurements using suitable measurement equipment shall be performed upon implementation of the aseptic packaging plant, and at regular intervals thereafter (annual intervals recommended), and after any change in relevant boundary conditions. The national regulations for workplace measurements shall be followed. |
|
3. |
In case of maintenance of the aseptic packaging plant (e.g. manual cleaning, technical incidents or repair) appropriate PPE (including respiratory protective equipment, chemical protective gloves, chemical protective coverall, eye protection) is required. The type of RPE, the filter type (code letter, colour) and glove material are to be specified by the authorisation holder within the product information. |
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 3.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 3.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 3.
4.2. Use description
Table 2
Disinfection of food contact surfaces in food and beverage industry by Clean-in-place (CIP)
|
Product type |
PT04: Food and feed area |
||||
|
Where relevant, an exact description of the authorised use |
- |
||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data |
||||
|
Field(s) of use |
Indoor use |
||||
|
Application method(s) |
Method: CIP Detailed description: Disinfection in food and beverage industry (food contact).Contact times for closed systems at 60oC in clean conditions:
|
||||
|
Application rate(s) and frequency |
Application rate: Application rate: automated dosing Dilution (%): RTU product Number and timing of application: Application frequency: once per day |
||||
|
Category(ies) of users |
Professional |
||||
|
Pack sizes and packaging material |
Light precluding HDPE Bulk delivery container, > 1 L - bulk Light precluding HDPE Jerry can, 1-100 L Light precluding HDPE IBC, 600-1000 L Light precluding HDPE Drum, 60-220 L Light precluding HDPE Bottle, 0,1-5 L |
4.2.1. Use-specific instructions
Before disinfection, system should be washed. Disinfection of CIP tanks, CIP pumps, pipe work and internal system of the processing equipment for food, beverage and feed, including milking machine hygiene (MMH) (closed systems). Rinse with water after treatment.
4.2.2. Use-specific risk mitigation measures
Keep food, feed or beverages away from treated surface until rinsed off with water.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 3.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 3.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 3.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3
5.1. Instructions for use
See use-specific instruction for use of meta SPC 3.
5.2. Risk mitigation measures
Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information).
The use of eye protection while handling the product is mandatory.
The process of dilution shall be carried out using an automatic dosing system.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse immediately with plenty of water, including under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention immediately.
In case of skin contact: Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Seek medical attention if irritation develops and persists.
If swallowed: Rinse mouth. Seek medical attention if symptoms occur.
If inhaled: Remove person to fresh air. Treat symptomatically. Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers.
Storage temperature: 0 - 35 °C
Shelf life: 24 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Oxypak D |
Market area: EU |
|||||
|
Oxypak S |
Market area: EU |
||||||
|
Oxypak S10 |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0003 1-3 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
35 % (w/w) |
||
1. META SPC 4 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 4 identifier
|
Identifier |
Meta SPC: META SPC 4 |
1.2. Suffix to the authorisation number
|
Number |
1-4 |
1.3. Product type(s)
|
Product type(s) |
PT03: Veterinary hygiene |
2. META SPC 4 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 4
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1,4 - 1,61 % (w/w) |
|
Citric acid monohydrate |
2-hydroxypropane -1,2,3-tricarboxylic acid |
Non-Active substance |
5949-29-1 |
201-069-1 |
0,9 - 0,9 % (w/w) |
|
Phenoxyethanol |
2-Phenoxyethanol |
Non-Active substance |
122-99-6 |
204-589-7 |
0,9 - 0,9 % (w/w) |
|
Sodium lauryl Sulphate |
Sodium dodecyl sulphate |
Non-Active substance |
151-21-3 |
205-788-1 |
3,88 - 3,88 % (w/w) |
|
L-Glutamic acid, N-coco acyl derivs., monosodium salts |
Sodium;(4S)-4-amino-5-hydroxy-5-oxopentanoate |
Non-Active substance |
68187-32-6 |
269-087-2 |
2 - 2 % (w/w) |
|
Sulfuric acid, mono-C12-14-alkyl esters, ammonium salts (Texapon ALS) |
Sulfuric acid, mono-C12-14-alkyl esters, ammonium salts |
Non-Active substance |
90583-11-2 |
292-209-0 |
1,12 - 1,12 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 4
|
Formulation type(s) |
AL Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4
|
Hazard statements |
H290: May be corrosive to metals. H319: Causes serious eye irritation. |
|
Precautionary statements |
P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P280: Wear eye protection. P280: Wear face protection. P390: Absorb spillage to prevent material damage. P406: Store in a a corrosion-resistant container with a resistant inner liner. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical attention. P337+P313: If eye irritation persists: Get medical advice. |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Teat dips for pre-milking disinfection
|
Product type |
PT03: Veterinary hygiene |
||
|
Where relevant, an exact description of the authorised use |
- |
||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||
|
Field(s) of use |
Indoor use |
||
|
Application method(s) |
Method: Manual dipping using a dip/foam cup (pre-milking disinfection) Detailed description: Pre-milking teat disinfection by manual dipping using a dip/foam cup. Contact time for dipping at 30oC in clean conditions:
|
||
|
Application rate(s) and frequency |
Application rate: Application rate: 4 ml of product per application (i.e. 1 ml per teat therefore 4 ml product for animals with four teats) Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day |
||
|
Category(ies) of users |
Professional |
||
|
Pack sizes and packaging material |
Light precluding HDPE Jugs, 1-100 L Light precluding HDPE Jerry can, 1-100 L Light precluding HDPE IBC, 600-1000 L Light precluding HDPE Drum, 60-220 L Light precluding HDPE Bottle, 0,1-5 L Light precluding HDPE; PE Pouch, 0,5-100 L |
4.1.1. Use-specific instructions
See general directions for use of meta SPC 4.
4.1.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 4.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 4.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 4.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 4.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4
5.1. Instructions for use
Always read the label or leaflet before use and follow all the instructions. The product should be applied pre-milking by use of a dipping or foam cup. The product must be brought to room temperature before use.
Clean teat with a dry wipe, fill foam cup with product and press foam cup until foam is generated. Dip teat into the cup. Apply foam for 60 seconds on the teat. Wipe the product away with a clean towel. Do not rinse after use.
5.2. Risk mitigation measures
Avoid splashes and spills.
Avoid hand to eye transfer.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse immediately with plenty of water, including under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention.
In case of skin contact: Rinse with plenty of water.
If swallowed: Rinse mouth. Seek medical attention if symptoms occur.
If inhaled: Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers.
Storage temperature: 0-25°C
Shelf life: 18 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
OxyFoamPlus |
Market area: EU |
|||||
|
MEPA Foampro D |
Market area: EU |
||||||
|
Predip PLUS |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0004 1-4 |
|||||
|
Common name |
UPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1,4 % (w/w) |
||
|
Citric acid monohydrate |
2-hydroxypropane -1,2,3-tricarboxylic acid |
Non-Active substance |
5949-29-1 |
201-069-1 |
0,9 % (w/w) |
||
|
Phenoxyethanol |
2-Phenoxyethanol |
Non-Active substance |
122-99-6 |
204-589-7 |
0,9 % (w/w) |
||
|
Sodium lauryl Sulphate |
Sodium dodecyl sulphate |
Non-Active substance |
151-21-3 |
205-788-1 |
3,88 % (w/w) |
||
|
L-Glutamic acid, N-coco acyl derivs., monosodium salts |
Sodium;(4S)-4-amino-5-hydroxy-5-oxopentanoate |
Non-Active substance |
68187-32-6 |
269-087-2 |
2 % (w/w) |
||
|
Sulfuric acid, mono-C12-14-alkyl esters, ammonium salts (Texapon ALS) |
Sulfuric acid, mono-C12-14-alkyl esters, ammonium salts |
Non-Active substance |
90583-11-2 |
292-209-0 |
1,12 % (w/w) |
||
1. META SPC 5 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 5 identifier
|
Identifier |
Meta SPC: META SPC 5 |
1.2. Suffix to the authorisation number
|
Number |
1-5 |
1.3. Product type(s)
|
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
2. META SPC 5 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 5
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1,5 - 1,5 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 5
|
Formulation type(s) |
AL Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5
|
Hazard statements |
|
|
Precautionary statements |
|
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of life sciences cleanrooms by spraying using trigger sprayer and dry wipe
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||||||||
|
Field(s) of use |
Indoor use |
||||||||||||||||
|
Application method(s) |
Method: Spraying using trigger sprayer and dry wipe Detailed description: Disinfection of surfaces, materials and equipment in life sciences cleanrooms A - D and supporting environments (e.g. pharmaceutical industry). Transfer disinfection or disinfection of small surfaces. Contact times for spraying and wiping at 20oC in dirty conditions:
Contact times for spraying and wiping at 20oC in clean conditions:
Contact times for spraying at 20oC in clean conditions:
|
||||||||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||||||||||||
|
Category(ies) of users |
Professional |
||||||||||||||||
|
Pack sizes and packaging material |
Light precluding Polyethylene terephthalate (PET) Spray bottle, 0.25-1 L Light precluding Polypropylene and Polyethylene (PP+PE) Spray bottle, 0.25-1 L Light precluding High Density Poly Ethylene (HDPE) or Poly Ethylene (PE) Bottle, 1-5 L |
4.1.1. Use-specific instructions
When used under clean conditions: clean surface before applying the product. For optimum results, hold the bottle upright and spray from a distance of 10 cm to 20 cm. Spray the product onto a dry wipe and wipe small surfaces such as worktops and equipment, or spray the product onto the surface, wipe the surface with a clean, dry wipe and let air dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
4.1.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 5.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5
4.2. Use description
Table 2
Disinfection of life sciences cleanrooms by mopping using flat mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||||
|
Field(s) of use |
Indoor |
||||||||||||
|
Application method(s) |
Method: Mopping using a flat mop and bucket Detailed description: Disinfection of floors in life sciences cleanrooms and supporting environments (e.g. pharmaceutical industry). Contact times for mopping at 20oC in dirty conditions:
Contact times for mopping at 20oC in clean conditions:
|
||||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 20 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||||||||
|
Category(ies) of users |
Professional |
||||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE or PE Bottle, 1-5 L |
4.2.1. Use-specific instructions
When used under clean conditions: clean surface before applying the product. Apply to surfaces by mopping.
4.2.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 5.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5
4.3. Use description
Table 3
Disinfection of small and/or large non-food contact surfaces in healthcare applications by spraying using trigger sprayer and dry wipe
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data |
||||||
|
Field(s) of use |
indoor use |
||||||
|
Application method(s) |
Method: Spraying using trigger spray and dry wipe Detailed description: Routine and non-routine disinfection of small and large surfaces in hospital rooms and medical practices. Contact times for spraying at 20oC in dirty conditions:
|
||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||
|
Category(ies) of users |
Professional |
||||||
|
Pack sizes and packaging material |
Light precluding PET Spray bottle, 0,25-1 L Light precluding HDPE Jerry can, 1-5 L |
4.3.1. Use-specific instructions
Routine disinfection: Disinfection of surfaces, which might be contaminated with pathogens during medical or nursing processes, on a regular basis to reduce the risk of transmission of such organisms via surfaces.
Non-routine disinfection: Disinfection in specific risk situations (unless differently regulated by national public health authorities).
The product is intended for one-step cleaning and disinfection. For optimum results, hold the bottle upright and spray from a distance of 30 cm. Spray the product onto the surface, then wipe surface with a clean, dry wipe and leave to dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
4.3.2. Use-specific risk mitigation measures
The area of the surfaces to be disinfected (in m2) must not be larger than 1/10 of the room volume (in m3) e.g. in a room of 120 m3 volume, the maximum surface to be disinfected is 12 m2.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5.
4.4. Use description
Table 4
Disinfection of small and/or large non-food contact surfaces in healthcare applications by spraying using trigger sprayer and dry wipe
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||||||||
|
Field(s) of use |
Indoor |
||||||||||||||||
|
Application method(s) |
Method: Spraying using trigger spray and dry wipe Detailed description: Routine and non-routine disinfection of small and large surfaces in hospital rooms and medical practices. Contact times for spraying and wiping at 20oC in dirty conditions:
Contact times for spraying and wiping at 20oC in clean conditions:
Contact times for spraying at 20oC in clean conditions:
|
||||||||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||||||||||||
|
Category(ies) of users |
professional |
||||||||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 1-5 L Light precluding PET Spray bottle, 0,25-1 L Light precluding HDPE Jerry can, 1-5 L |
4.4.1. Use-specific instructions
Routine disinfection: Disinfection of surfaces, which might be contaminated with pathogens during medical or nursing processes, on a regular basis to reduce the risk of transmission of such organisms via surfaces.
Non-routine disinfection: Disinfection in specific risk situations (unless differently regulated by national public health authorities).
The product is intended for one-step cleaning and disinfection. When used under clean conditions: clean surface before applying the product. For optimum results, hold the bottle upright and spray from a distance of 30 cm. Spray the product onto a dry wipe and wipe small surfaces such as worktops and equipment, or spray product onto the surface, then wipe surface with a clean, dry wipe and leave to dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
4.4.2. Use-specific risk mitigation measures
The area of the surface to be disinfected (in m2) must not be larger than 1/10 of the room volume (in m3) e.g. in a room of 120 m3 volume, the maximum surface to be disinfected is 12 m2.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5
4.5. Use description
Table 5
Disinfection of small and/or large non-food contact surfaces in healthcare applications by wiping using clean single-use cloth/wipe and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data |
||||||
|
Field(s) of use |
Indoor |
||||||
|
Application method(s) |
Method: Wiping using cloth/wipe and bucket Detailed description: Routine and non-routine disinfection of small and large surfaces in hospital rooms and medical practices. Contact times for wiping at 20oC in dirty conditions:
|
||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||
|
Category(ies) of users |
professional |
||||||
|
Pack sizes and packaging material |
Light precluding HDPE Jerry can, 1-5 L |
4.5.1. Use-specific instructions
Routine disinfection: Disinfection of surfaces, which might be contaminated with pathogens during medical or nursing processes, on a regular basis to reduce the risk of transmission of such organisms via surfaces.
Non-routine disinfection: Disinfection in specific risk situations (unless differently regulated by national public health authorities).
The product is intended for one-step cleaning and disinfection. Pour product into a clean bucket and distribute across surface using single-use cloth/wipe and let air dry. Used wipes must be disposed of in a closed container.
4.5.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 5.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5.
4.6. Use description
Table 6
Disinfection of small and/or large non-food contact surfaces in healthcare applications by wiping using clean single-use cloth/wipe and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||
|
Field(s) of use |
Indoor |
||||||||||
|
Application method(s) |
Method: Wiping using cloth/wipe and bucket Detailed description: Routine and non-routine disinfection of small and large surfaces in hospital rooms and medical practices. Contact times for wiping at 20oC in dirty conditions:
Contact times for wiping at 20oC in clean conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||||||
|
Category(ies) of users |
Professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 1-5 L Light precluding HDPE Jerry can, 1-5 L |
4.6.1. Use-specific instructions
Routine disinfection: Disinfection of surfaces, which might be contaminated with pathogens during medical or nursing processes, on a regular basis to reduce the risk of transmission of such organisms via surfaces.
Non-routine disinfection: Disinfection in specific risk situations (unless differently regulated by national public health authorities).
The product is intended for one-step cleaning and disinfection. When used under clean conditions: clean surface before applying the product. Pour product into a clean bucket and distribute across surface using single-use cloth/wipe and let air dry. Used wipes must be disposed of in a closed container.
4.6.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 5.
4.6.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5
4.6.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5.
4.6.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5
4.7. Use description
Table 7
Disinfection of large non-food contact surfaces in healthcare applications by mopping using mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||
|
Field(s) of use |
indoor use |
||||||||||
|
Application method(s) |
Method: Mopping using mop and bucket Detailed description: Non-routine disinfection of larger surfaces in hospital room. Contact times for mopping at 20oC in dirty conditions:
Contact times for mopping at 20oC in clean conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 20 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||||||
|
Category(ies) of users |
Professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 1-5 L Light precluding HDPE Jerry can, 1-5 L |
4.7.1. Use-specific instructions
Non routine disinfection: Disinfection in specific risk situations (unless differently regulated by national public health authorities).
The product is intended for one-step cleaning and disinfection. When used under clean conditions: clean surface before applying the product. Fill the bucket with ready to use product and distribute across floor using mop and let air dry.
4.7.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 5.
4.7.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5
4.7.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5
4.7.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5
4.8. Use description
Table 8
Disinfection of large non-food contact surfaces in healthcare applications by mopping using mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||
|
Field(s) of use |
indoor use |
||||||||||
|
Application method(s) |
Method: Mopping using mop and bucket Detailed description: Non-routine disinfection of larger surfaces in medical practices. Contact times for mopping at 20oC in dirty conditions:
Contact times for mopping at 20oC in clean conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 20 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||||||
|
Category(ies) of users |
professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 1-5 L Light precluding HDPE Jerry can, 1-5 L |
4.8.1. Use-specific instructions
Non routine disinfection: Disinfection in specific risk situations (unless differently regulated by national public health authorities).
The product is intended for one-step cleaning and disinfection. When used under clean conditions: clean surface before applying the product. Fill the bucket with ready to use product and distribute across floor using mop, wipe the surface with a clean, dry mop and let air dry.
4.8.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 5.
4.8.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5.
4.8.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5
4.8.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5
4.9. Use description
Table 9
Disinfection of small and/or large non-food contact surfaces in healthcare applications by spraying the surface and then wiping with a clean cloth/wipe or spraying liquid onto a wipe and then wiping the surface, or by having the disinfectant in a bucket and wiping with a single-use clean cloth/wipe, and non-routine disinfection of larger surfaces by mopping using mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||||||||||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||||||||||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||||||||||||||||||
|
Field(s) of use |
indoor use |
||||||||||||||||||||||||||
|
Application method(s) |
Method: Spraying using trigger sprayer and dry wipe and mopping using mop and bucket Detailed description: Non-routine disinfection of smaller and larger surfaces in hospital rooms and medical practices. Contact times for spraying and wiping, mopping at 20oC in dirty conditions:
Contact times for spraying and wiping, mopping at 20oC in clean conditions:
Contact times for spraying at 20oC in clean conditions:
Method: Wiping using cloth/wipe and bucket and mopping using mop and bucket Detailed description: Non-routine disinfection of smaller and larger surfaces in hospital rooms and medical practices. Contact times for wiping and mopping at 20oC in dirty conditions:
Contact times for wiping and mopping at 20oC in clean conditions:
|
||||||||||||||||||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate for spraying: 10 ml/m2; Application rate for mopping: 20 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency for combined trigger spraying and mopping: up to twice per day per room Application rate: Application rate for wiping: 10 ml/m2; Application rate for mopping: 20 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency for combined wiping and mopping: up to twice per day per room |
||||||||||||||||||||||||||
|
Category(ies) of users |
professional |
||||||||||||||||||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 1-5 L Light precluding PET Spray bottle, 0,25-1 L Light precluding HDPE Jerry can, 1-5 L |
4.9.1. Use-specific instructions
The product is intended for one-step cleaning and disinfection. When used under clean conditions: clean surface before applying the product.
Non-routine disinfection: Disinfection in specific risk situations (unless differently regulated by national public health authorities).
Spraying using trigger sprayer and wiping using a dry wipe: For optimum results, hold the bottle upright and spray from a distance of 30 cm. Spray the product onto a dry wipe and wipe small surfaces such as worktops and equipment, or spray the product onto the surface, wipe the surface with a clean, dry wipe and let air dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
Mopping using mop and bucket: Fill the bucket with ready to use product and distribute across floor using mop, wipe the surface with a clean, dry mop and let air dry.
Wiping using cloth/wipe and bucket: Pour product into a clean bucket and distribute across surface using single-use cloth/wipe, wipe the surface with clean cloth/wipe and let air dry. Used wipes must be disposed of in a closed container.
4.9.2. Use-specific risk mitigation measures
For spraying: The area of the surfaces to be disinfected (in m2) must not be larger than 1/10 of the room volume (in m3) e.g. in a room of 120 m3 volume, the maximum surface to be disinfected is 12 m2.
4.9.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5
4.9.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5.
4.9.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5
4.10. Use description
Table 10
Disinfection of small non-food contact surfaces in institutional/commercial buildings by spraying using trigger sprayer and dry wipe
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||||||||
|
Field(s) of use |
indoor use |
||||||||||||||||
|
Application method(s) |
Method: Spraying using trigger spray and dry wipe Detailed description: Routine disinfection of small surfaces in small non-food areas (e.g. bathrooms). Contact times for spraying and wiping at 20oC in dirty conditions:
Contact times for spraying and wiping at 20oC in clean conditions:
Contact times for spraying at 20oC in clean conditions:
|
||||||||||||||||
|
Application rate(s) and frequency |
Application rate: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||||||||||
|
Category(ies) of users |
Professional |
||||||||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 1-5 L Light precluding PET Spray bottle, 0,25-1 L |
4.10.1. Use-specific instructions
When used under clean conditions: clean surface before applying the product. For optimum results, hold the bottle upright and spray from a distance of 30 cm. Spray the product onto a dry wipe and wipe small surfaces such as worktops and equipment, or spray the product onto the surface, wipe the surface with a clean, dry wipe and let air dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
4.10.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 5.
4.10.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5
4.10.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5.
4.10.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5
4.11. Use description
Table 11
Disinfection of small food contact surfaces in institutional/commercial buildings by spraying using trigger sprayer and dry wipe
|
Product type |
PT04: Food and feed area |
||||||||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||||||||
|
Field(s) of use |
indoor use |
||||||||||||||||
|
Application method(s) |
Method: Spraying using trigger spray and dry wipe Detailed description: Routine disinfection of small surfaces in small food areas (e.g. kitchens). Contact times for spraying and wiping at 20oC in dirty conditions:
Contact times for spraying and wiping at 20oC in clean conditions:
Contact times spraying at 20oC in clean conditions:
|
||||||||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to 10 times per day per room. |
||||||||||||||||
|
Category(ies) of users |
Professional |
||||||||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 1-5 L Light precluding PET Spray bottle, 0,25-1 L |
4.11.1. Use-specific instructions
When used under clean conditions: clean surface before applying the product. For optimum results, hold the bottle upright and spray from a distance of 30 cm. Spray the product onto a dry wipe and wipe small surfaces such as worktops and equipment, or spray the product onto the surface, wipe the surface with a clean, dry wipe and let air dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
4.11.2. Use-specific risk mitigation measures
Keep food, feed or beverages away from treated surface until dried. Do not use directly on or near food, feed or drinks.
4.11.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 5.
4.11.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 5.
4.11.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 5.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 5
5.1. Instructions for use
Always read the label or leaflet before use and follow all the instructions. The product should be applied to a dry surface. Wet surface completely using the product. Do not rinse after use. Do not use on surfaces sensitive to oxidative agents such as marble, copper or brass.
5.2. Risk mitigation measures
-
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse with plenty of water.
In case of skin contact: Rinse with plenty of water.
If swallowed: Rinse mouth. Seek medical attention if symptoms occur.
If inhaled: Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers.
Storage temperature:0-35 °C. Protect from frost.
Shelf life: 18 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 5
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Incidin OxyFoam |
Market area: EU |
|||||
|
Authorisation number |
|
EU-0024303-0005 1-5 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1,5 % (w/w) |
||
7.2. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Incidin OxyFoam S |
Market area: EU |
|||||
|
Klercide Sporicidal Enhanced Peroxide |
Market area: EU |
||||||
|
KitchenPro Oxy Foam S |
Market area: EU |
||||||
|
Anios Low Peroxide IP sterile |
Market area: EU |
||||||
|
Sirafan Oxy |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0006 1-5 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1,5 % (w/w) |
||
1. META SPC 6 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 6 identifier
|
Identifier |
Meta SPC: META SPC 6 |
1.2. Suffix to the authorisation number
|
Number |
1-6 |
1.3. Product type(s)
|
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
2. META SPC 6 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 6
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
2 - 2,3 % (w/w) |
|
N-propanol |
Propan-1-ol |
Non-Active substance |
71-23-8 |
200-746-9 |
17,5 - 17,5 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 6
|
Formulation type(s) |
AL Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 6
|
Hazard statements |
H226: Flammable liquid and vapour. H318: Causes serious eye damage. |
|
Precautionary statements |
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof ventilating equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P280: Wear eye protection. P280: Wear face protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a doctor. P310: Immediately call a POISON CENTER. P370+P378: In case of fire: Use water to extinguish. P403+P235: Store in a well-ventilated place. Keep cool. P501: Dispose of contents to in accordance with national regulations. P501: Dispose of container to in accordance with national regulations. |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of small surfaces in industry (e.g. dining areas, bathrooms) by spraying using trigger sprayer
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||
|
Where relevant, an exact description of the authorised use |
- |
||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||||
|
Field(s) of use |
indoor use |
||||
|
Application method(s) |
Method: Spraying using trigger sprayer and dry wipe Detailed description: Disinfection of small surfaces in industry (e.g. dining areas, bathrooms).Contact time for spraying at 10oC and 20oC in dirty conditions:
Contact time for spraying at 10oC in clean conditions:
|
||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to 3 times per day |
||||
|
Category(ies) of users |
professional |
||||
|
Pack sizes and packaging material |
Light precluding HDPE Container, 1-100 L Light precluding HDPE Jerry can, 1-100 L Light precluding HDPE IBC, 600-1000 L Light precluding HDPE Drum, 60-220 L Light precluding HDPE Bottle, 0,1-5 L Light precluding HDPE Spray bottle, up to 1 L |
4.1.1. Use-specific instructions
See general directions of use of meta SPC 6.
4.1.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 6.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 6.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 6.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 6.
4.2. Use description
Table 2
Disinfection of food contact surfaces in food and beverage industry by spraying using trigger sprayer
|
Product type |
PT04: Food and feed area |
||||
|
Where relevant, an exact description of the authorised use |
- |
||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||||
|
Field(s) of use |
indoor use |
||||
|
Application method(s) |
Method: Spraying using trigger sprayer and dry wipe Detailed description: Disinfection of small surfaces in food processing plants. Contact time for spraying at 10oC and 20oC in dirty conditions:
Contact time for spraying at 10oC in clean conditions:
|
||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): RTU product Number and timing of application: Application frequency: up to 4 times per day |
||||
|
Category(ies) of users |
Professional |
||||
|
Pack sizes and packaging material |
Light precluding HDPE Container, 1-100 L Light precluding HDPE Jerry can, 1-100 L Light precluding HDPE IBC, 600-1000 L Light precluding HDPE Drum, 60-220 L Light precluding HDPE Bottle, 0,1-5 L Light precluding HDPE Spray bottle, up to 1 L |
4.2.1. Use-specific instructions
See general directions for use of meta SPC 6.
4.2.2. Use-specific risk mitigation measures
Keep food, feed or beverages away from treated surface until dried. Do not use directly on or near food, feed or drinks.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 6.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 6.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 6.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 6
5.1. Instructions for use
Always read the label or leaflet before use and follow all the instructions. When used under clean conditions: clean surface before applying the product. The product should be applied to a dry surface. For optimum results, hold the bottle upright and spray from a distance of 10 cm to 20 cm. Spray the product onto the surface, wipe the surface with a clean, dry wipe or let air dry. Always close the nozzle after use. Wet surface completely using the product. Do not rinse after use. Do not use on surfaces sensitive to oxidative agents such as marble, copper or brass. Used wipes must be disposed of in a closed container.
5.2. Risk mitigation measures
The use of eye protection while handling of the product is mandatory.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse immediately with plenty of water, including under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention immediately.
In case of skin contact: Rinse with plenty of water.
If swallowed: Rinse mouth. Seek medical attention if symptoms occur.
If inhaled: Remove person to fresh air. Treat symptomatically. Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers. Keep away from heat and sources of ignition. Keep in a cool, well-ventilated place. Keep away from oxidizing agents.
Storage temperature: 0-30°C
Shelf life: 24 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 6
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
OxyDes Rapid |
Market area: EU |
||||
|
Authorisation number |
|
EU-0024303-0007 1-6 |
||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
|
Hydrogen peroxide |
|
Active substance |
7722-84-1 |
231-765-0 |
2 % (w/w) |
|
|
N-propanol |
Propan-1-ol |
Non-Active substance |
71-23-8 |
200-746-9 |
17,5 % (w/w) |
|
1. META SPC 7 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 7 identifier
|
Identifier |
Meta SPC: META SPC 7 |
1.2. Suffix to the authorisation number
|
Number |
1-7 |
1.3. Product type(s)
|
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
2. META SPC 7 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 7
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
4,95 - 5,45 % (w/w) |
|
Capryleth-9 Carboxylic acid (mixture of alkyl ether carboxylic acid) |
Poly(oxy-1,2-ethanediyl), .alpha.-(carboxymethyl)-.omega.-(octyloxy)- (4-11 EO) |
Non-Active substance |
53563-70-5 |
|
2,15 - 2,15 % (w/w) |
|
Hexeth-4 Carboxylic Acid (mixture of alkyl ether carboxylic acid) |
Poly(oxy-1,2-ethanediyl), .alpha.-(carboxymethyl)-.omega.-(hexyloxy)- (3 EO) |
Non-Active substance |
105391-15-9 |
|
0,62 - 0,62 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 7
|
Formulation type(s) |
SL Soluble concentrate |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 7
|
Hazard statements |
H314: Causes severe skin burns and eye damage. |
|
Precautionary statements |
P260: Do not breathe spray. P260: Do not breathe vapours. P264: Wash hands thoroughly after handling. P280: Wear eye protection. P280: Wear face protection. P280: Wear protective gloves. P280: Wear protective clothing. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P310: Immediately call a POISON CENTER. P310: Immediately call a doctor. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P321: Specific treatment (see first aid instruction on this label). P363: Wash contaminated clothing before reuse. P405: Store locked up. P501: Dispose of contents to in accordance with national regulations. P501: Dispose of container to in accordance with national regulations. |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of non-food contact surfaces in healthcare applications by mopping using flat mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||
|
Where relevant, an exact description of the authorised use |
- |
||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||||
|
Field(s) of use |
indoor use |
||||
|
Application method(s) |
Method: Mopping using flat mop and bucket Detailed description: Routine and non-routine disinfection of floors in hospital rooms and medical practices that are frequently touched by people and that are not frequently touched by people. Contact times for mopping at 20oC in clean conditions:
|
||||
|
Application rate(s) and frequency |
Application rate: Application rate: 20 ml/m2 Dilution (%): Dilution (%): 7,5-10 Number and timing of application: Application frequency: up to 10 times per day per room |
||||
|
Category(ies) of users |
Professional |
||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Canister, 1-100 L Light precluding HDPE Pouch, 0,01-1 L Light precluding HDPE Jug, 0,5-5 L |
4.1.1. Use-specific instructions
Routine disinfection: Disinfection of surfaces, which might be contaminated with pathogens during medical or nursing processes, on a regular basis to reduce the risk of transmission of such organisms via surfaces.
Non-routine disinfection: Disinfection in specific risk situations (unless differently regulated by national public health authorities).
The product is intended for one-step cleaning and disinfection. Clean surface before applying the product. Fill the bucket with diluted product and distribute across floor using flat mop, wipe the surface with clean, dry floor mop and let air dry. Do not rinse after use.
4.1.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 7.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 7.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 7.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 7.
4.2. Use description
Table 2
Disinfection of small and/or large non-food contact surfaces in institutional/commercial buildings by spraying using trigger sprayer and dry wipe and/or by mopping using flat mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||||||||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||||||||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||||||||||||||||||||||||
|
Field(s) of use |
indoor use |
||||||||||||||||||||||||
|
Application method(s) |
Method: Spraying using trigger sprayer and dry wipe Detailed description: Routine disinfection of small surfaces in small non-food areas (e.g. bathrooms). Contact times for spraying at 20oC in clean conditions:
Contact times for spraying at 20oC in dirty conditions:
Method: Mopping using flat mop and bucket Detailed description: Routine disinfection of large surfaces in small non-food areas (e.g. bathrooms).Contact times for mopping at 20oC in clean conditions:
Method: Spraying using trigger sprayer and dry wipe and mopping using flat mop and bucket Detailed description: Routine disinfection of small and large surfaces in small non-food areas (e.g. bathrooms). Contact times for spraying and mopping at 20oC in clean conditions:
|
||||||||||||||||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate for spraying: 10 ml/m2 Dilution (%): Dilution (%): 7,5-15 Number and timing of application: Application frequency for trigger spraying: up to 10 times per day per room Application rate: Application rate for mopping: 20 ml/m2 Dilution (%): Dilution (%): 7,5-10 Number and timing of application: Application frequency for mopping: up to twice per day per room Application rate: Application rate for spraying: 10 ml/m2; Application rate for mopping: 20 ml/m2 Dilution (%): Dilution (%): 7,5-15 Number and timing of application: Application frequency for combined trigger spraying and mopping: once per day per room. |
||||||||||||||||||||||||
|
Category(ies) of users |
professional |
||||||||||||||||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Canister, 1-100 L Light precluding HDPE Pouch, 0,01-1 L Light precluding HDPE jug, 0,5-5 L |
4.2.1. Use-specific instructions
Do not rinse after use.
Spraying: When used under clean conditions: clean surface before applying the product. For optimum results, hold the bottle upright and spray from a distance of 10 cm to 20 cm. Spray the diluted product onto the surface, wipe the surface with a clean, dry wipe and let air dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
Mopping: The product is intended for one-step cleaning and disinfection. Clean surface before applying the product. Fill the bucket with diluted product and distribute across floor using flat mop, wipe the surface with clean, dry mop and let air dry.
4.2.2. Use-specific risk mitigation measures
Do not breathe vapours/spray.
For spraying: The area of the surfaces to be disinfected (in m2) must not be larger than 1/10 of the room volume (in m3) e.g. in a room of 120 m3 volume, the maximum surface to be disinfected is 12 m2.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 7.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 7.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 7.
4.3. Use description
Table 3
Disinfection of large non-food contact surfaces in institutional/commercial buildings by mopping using flat mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||
|
Where relevant, an exact description of the authorised use |
- |
||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||||
|
Field(s) of use |
indoor use |
||||
|
Application method(s) |
Method: Mopping using flat mop and bucket Detailed description: Routine disinfection of large surfaces in large non-food areas. Contact time for mopping at 20oC in clean conditions:
|
||||
|
Application rate(s) and frequency |
Application rate: Application rate: 20 ml/m2 Dilution (%): Dilution (%): 7,5-10 Number and timing of application: Application frequency: up to 10 times per day per room |
||||
|
Category(ies) of users |
professional |
||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Canister, 1-100 L Light precluding HDPE Pouch, 0,01-1 L Light precluding HDPE Jug, 0,5-5 L |
4.3.1. Use-specific instructions
The product is intended for one-step cleaning and disinfection. Clean surface before applying the product. Fill the bucket with diluted product and distribute across floor using flat mop, wipe the surface with a clean, dry floor mop and let air dry. Do not rinse after use.
4.3.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 7.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 7.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 7.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 7.
4.4. Use description
Table 4
Disinfection of large non-food contact surfaces in institutional/commercial buildings by spraying using wall- mounted device
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||||||||||
|
Field(s) of use |
indoor use |
||||||||||
|
Application method(s) |
Method: Spraying with a wall-mounted device Detailed description: Routine disinfection of large surfaces in large non-food and food areas. Contact times for spraying at 20oC in clean conditions:
Contact times for spraying at 20oC in dirty conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 180 ml/m2 Dilution (%): 7,5-15 Number and timing of application: Application frequency: once per day per room |
||||||||||
|
Category(ies) of users |
Professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Canister, 1-100 L Light precluding HDPE Pouch, 0,01-1 L Light precluding HDPE Jug, 0,5-5 L |
4.4.1. Use-specific instructions
Apply product via wall-mounted device. When used under clean conditions: clean surface before applying the product. Rinse after application.
4.4.2. Use-specific risk mitigation measures
Do not breathe vapours/spray.
Ensure technical ventilation with at least 15 air exchanges/hour.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 7.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 7.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 7.
4.5. Use description
Table 5
Disinfection of large food contact surfaces in institutional/commercial buildings by spraying using trigger sprayer
|
Product type |
PT04: Food and feed area |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||||||||||
|
Field(s) of use |
indoor use |
||||||||||
|
Application method(s) |
Method: Spraying using trigger sprayer and dry wipe Detailed description: Routine disinfection of large surfaces in large food areas (e.g. kitchens). Contact time for spraying at 20oC in clean conditions:
Contact times for spraying at 20oC in dirty conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): 7,5-15 Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||||
|
Category(ies) of users |
professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Canister, 1-100 L Light precluding HDPE Pouch, 0,01-1 L Light precluding HDPE Jug, 0,5-5 L |
4.5.1. Use-specific instructions
When used under clean conditions: clean surface before applying the product. For optimum results, hold the bottle upright and spray from a distance of 10 cm to 20 cm. Spray the diluted product onto the surface, wipe the surface with a clean, dry wipe and let air dry. Always close the nozzle after use. Do not rinse after use. Used wipes must be disposed of in a closed container.
4.5.2. Use-specific risk mitigation measures
Do not breathe vapours/spray.
Keep food, feed or beverages away from treated surfaces until dried. Do not use directly on or near food, feed or drinks.
The area of the surfaces to be disinfected (in m2) must not be larger than 1/10 of the room volume (in m3) e.g. in a room of 120 m3 volume, the maximum surface to be disinfected is 12 m2.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 7.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 7.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 7.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 7
5.1. Instructions for use
Always read the label or leaflet before use and follow all the instructions. The product should be applied to a dry surface. Wet surface completely using the product. Do not use on surfaces sensitive to oxidative agents such as marble, copper or brass.
Dilution instruction (7,5%): to produce 1 L of diluted surface disinfectant, add 75 ml of the concentrated product to approximately 500 ml of distilled water or water of equal quality (e.g. demineralised), mix and fill up to 1 L with distilled water or water of equal quality.
Dilution instruction (10%): to produce 1 L of diluted surface disinfectant, add 100 ml of the concentrated product to approximately 500 ml of distilled water or water of equal quality (e.g. demineralised), mix and fill up to 1 L with distilled water or water of equal quality.
Dilution instruction (15%): to produce 1 L of diluted surface disinfectant, add 150 ml of the concentrated product to approximately 500 ml of distilled water or water of equal quality (e.g. demineralised), mix and fill up to 1 L with distilled water or water of equal quality.
5.2. Risk mitigation measures
Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information).
The use of eye protection while handling the product is mandatory.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse immediately with plenty of water, including under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention immediately.
In case of skin contact: Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Wash clothing before reuse. Thoroughly clean shoes before reuse. Seek medical attention immediately.
If swallowed: Rinse mouth with water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Seek medical attention immediately.
If inhaled: Remove person to fresh air. Treat symptomatically. Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers.
Storage temperature: 0-25 °C. Protect from frost.
Shelf life: 18 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 7
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Incidin OxyConcentrate |
Market area: EU |
|||||
|
UltraSan Floor |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0008 1-7 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
4,95 % (w/w) |
||
|
Capryleth-9 Carboxylic acid (mixture of alkyl ether carboxylic acid) |
Poly(oxy-1,2-ethanediyl), .alpha.-(carboxymethyl)-.omega.-(octyloxy)- (4-11 EO) |
Non-Active substance |
53563-70-5 |
|
2,15 % (w/w) |
||
|
Hexeth-4 Carboxylic Acid (mixture of alkyl ether carboxylic acid) |
Poly(oxy-1,2-ethanediyl), .alpha.-(carboxymethyl)-.omega.-(hexyloxy)- (3 EO) |
Non-Active substance |
105391-15-9 |
|
0,62 % (w/w) |
||
7.2. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
KitchenPro Oxy Des Super Concentrate |
Market area: EU |
|||||
|
Incidin OxyConcentrate FF |
Market area: EU |
||||||
|
CidalSan Large Area |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0009 1-7 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
4,95 % (w/w) |
||
|
Capryleth-9 Carboxylic acid (mixture of alkyl ether carboxylic acid) |
Poly(oxy-1,2-ethanediyl), .alpha.-(carboxymethyl)-.omega.-(octyloxy)- (4-11 EO) |
Non-Active substance |
53563-70-5 |
|
2,15 % (w/w) |
||
|
Hexeth-4 Carboxylic Acid (mixture of alkyl ether carboxylic acid) |
Poly(oxy-1,2-ethanediyl), .alpha.-(carboxymethyl)-.omega.-(hexyloxy)- (3 EO) |
Non-Active substance |
105391-15-9 |
|
0,62 % (w/w) |
||
1. META SPC 8 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 8 identifier
|
Identifier |
Meta SPC: META SPC 8 |
1.2. Suffix to the authorisation number
|
Number |
1-8 |
1.3. Product type(s)
|
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
2. META SPC 8 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 8
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1 - 1 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 8
|
Formulation type(s) |
AL - Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 8
|
Hazard statements |
|
|
Precautionary statements |
|
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of surfaces in industry (e.g. dining areas, bathrooms) by wiping using impregnated RTU wipes
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data |
||||||||||
|
Field(s) of use |
indoor use |
||||||||||
|
Application method(s) |
Method: Wiping using impregnated RTU wipes Detailed description: Disinfection of surfaces in industry (e.g. dining areas, bathrooms). Contact time for wiping at 10oC in dirty conditions:
Contact times for wiping at 20oC in dirty conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 1 wipe per m2 (corresponding to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||||
|
Category(ies) of users |
Professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding PP Bucket with 10-5000 impregnated 60% polyester / 40% lyocell blend or non-woven 100% polypropylene wipes (wipe size: 200x250 mm or 200x200 mm). Light precluding PP Pouch with 10-5000 impregnated 60% polyester / 40% lyocell blend or non-woven 100% polypropylene wipes (wipe size: 200x250 mm or 200x200 mm). |
4.1.1. Use-specific instructions
See general directions for use of meta SPC 8.
4.1.2. Use-specific risk mitigation measures
-
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 8.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 8.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 8.
4.2. Use description
Table 2
Disinfection of small food contact surfaces in food and beverage industry by wiping using impregnated RTU wipes
|
Product type |
PT04: Food and feed area |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data |
||||||||||
|
Field(s) of use |
Indoor use |
||||||||||
|
Application method(s) |
Method: Wiping using impregnated RTU wipes Detailed description: Disinfection of small surfaces in food processing plant. Contact time for wiping at 10oC in dirty conditions:
Contact times for wiping at 20oC in dirty conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 1 wipe per m2 (corresponding to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||||
|
Category(ies) of users |
Professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding PP Bucket with 10-5000 impregnated 60% polyester / 40% lyocell blend or non-woven 100% polypropylene wipes (wipe size: 200x250 mm or 200x200 mm). Light precluding PP Pouch with 10-5000 impregnated 60% polyester / 40% lyocell blend or non-woven 100% polypropylene wipes (wipe size: 200x250 mm or 200x200 mm). |
4.2.1. Use-specific instructions
See general directions for use of meta SPC 8.
4.2.2. Use-specific risk mitigation measures
Keep food, feed or beverages away from treated surface until dried. Do not use directly on or near food, feed or drinks.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 8.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 8.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 8.
4.3. Use description
Table 3
Disinfection of small non-food contact surfaces in healthcare applications by wiping using impregnated RTU wipes
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data |
||||||
|
Field(s) of use |
indoor use |
||||||
|
Application method(s) |
Method: Wiping using impregnated RTU wipes Detailed description: Routine disinfection of smaller surfaces in hospital rooms and medical practices that are not frequently touched by people. Contact time for wiping at 10oC in dirty conditions:
Contact times for wiping at 20oC in dirty conditions:
|
||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 1 wipe per m2 (corresponding to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||
|
Category(ies) of users |
Professional |
||||||
|
Pack sizes and packaging material |
Light precluding PP Bucket with 10-5000 impregnated 60% polyester / 40% lyocell blend or non-woven 100% polypropylene wipes (wipe size: 200x250 mm or 200x200 mm). Light precluding PP Pouch with 10-5000 impregnated 60% polyester / 40% lyocell blend or non-woven 100% polypropylene wipes (wipe size: 200x250 mm or 200x200 mm). |
4.3.1. Use-specific instructions
Routine disinfection: Disinfection of surfaces, which might be contaminated with pathogens during medical or nursing processes on a regular basis to reduce the risk of transmission of such organisms via surfaces.
4.3.2. Use-specific risk mitigation measures
-
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 8.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 8.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 8.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 8
5.1. Instructions for use
The product is intended for one-step cleaning and disinfection. Always read the label or leaflet before use and follow all the instructions. The product should be applied to a dry surface. Wet surface completely using the product. Allow surface to air dry after using the product. Do not rinse after use. Close container when not in use. Do not use wipes which have become dehydrated. Dispose of the container when empty. Do not use on surfaces sensitive to oxidative agents such as marble, copper or brass. Used wipes must be disposed of in closed container.
5.2. Risk mitigation measures
-
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse with plenty of water.
In case of skin contact: Rinse with plenty of water.
If swallowed: Rinse mouth. Seek medical attention if symptoms occur.
If inhaled: Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers.
Storage temperature: 0-35 °C. Protect from frost.
Shelf life: 18 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 8
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
DrySan Oxy Wipes |
Market area: EU |
|||||
|
IncidinOxyWipe |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0010 1-8 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1 % (w/w) |
||
1. META SPC 9 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 9 identifier
|
Identifier |
Meta SPC: META SPC 9 |
1.2. Suffix to the authorisation number
|
Number |
1-9 |
1.3. Product type(s)
|
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
2. META SPC 9 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 9
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
7 - 7,7 % (w/w) |
|
Phosphoric acid |
Orthophosphoric acid |
Non-Active substance |
7664-38-2 |
231-633-2 |
1,5 - 1,5 % (w/w) |
|
Nitric acid |
Nitric acid |
Non-Active substance |
7697-37-2 |
231-714-2 |
3,71 - 3,71 % (w/w) |
|
Alcohol EO phosphate ester |
Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, mono-C8-10-alkyl ethers, phosphates |
Non-Active substance |
68130-47-2 |
|
14,625 - 14,625 % (w/w) |
|
Alkylpolyglycoside C8-C10 |
(3R,4S,5S,6R)-2-decoxy-6-(hydroxymethyl)oxane-3,4,5-triol |
Non-Active substance |
68515-73-1 |
500-220-1 |
6,35 - 6,35 % (w/w) |
|
Alcohols, C10-C16 ethoxylated propoxylated (Dehydol 980) |
Alcohols, C10-C16 ethoxylated propoxylated |
Non-Active substance |
69227-22-1 |
|
3 - 3 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 9
|
Formulation type(s) |
SL Soluble concentrate |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 9
|
Hazard statements |
H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. |
|
Precautionary statements |
P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P260: Do not breathe vapours. P260: Do not breathe spray. P280: Wear face protection. P280: Wear protective gloves. P280: Wear eye protection. P280: Wear protective clothing. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P310: Immediately call a doctor. P310: Immediately call a POISON CENTER. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P321: Specific treatment (see first aid instruction on this label). P363: Wash contaminated clothing before reuse. P390: Absorb spillage to prevent material damage. P406: Store in a a corrosion-resistant container with a resistant inner liner. P405: Store locked up. P501: Dispose of contents to in accordance with national regulations. P501: Dispose of container to in accordance with national regulations. |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of small non-food contact surfaces in healthcare applications by wiping using clean single-use cloth/wipe and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||
|
Field(s) of use |
indoor use |
||||||||
|
Application method(s) |
Method: Wiping using cloth/wipe and bucket Detailed description: Routine and non-routine disinfection of smaller surfaces in hospital rooms and medical practices that are frequently touched by people and that are not frequently touched by people. Contact times for wiping at 20oC in dirty conditions:
|
||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): 3-5 Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||
|
Category(ies) of users |
Professional |
||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Jug, 0,5-5 L Light precluding HDPE Pouch, 0,01-1 L |
4.1.1. Use-specific instructions
Routine disinfection: Disinfection of surfaces which might be contaminated with pathogens during medical or nursing processes, on a regular basis, to reduce the risk of transmission of such organisms via surfaces.
Non-routine disinfection: Disinfection in specific risk situations (unless differently regulated by national public health authorities).
The product is intended for one-step cleaning and disinfection. Pour diluted product into a clean bucket and distribute across surface using a single-use cloth/wipe, wipe the surface with a clean cloth/wipe and let air dry. Do not rinse after use. Do not use on surfaces sensitive to oxidative agents such as marble, copper or brass. Used wipes must be disposed of in a closed container.
4.1.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 9.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 9.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 9.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 9.
4.2. Use description
Table 2
Disinfection of large non-food contact surfaces in healthcare applications by mopping using flat mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||
|
Field(s) of use |
indoor use |
||||||||
|
Application method(s) |
Method: Mopping using flat mop and bucket Detailed description: Routine and non-routine disinfection of larger surfaces in hospital rooms and medical practices that are frequently touched by people and that are not frequently touched by people. Contact times for mopping at 20oC in dirty conditions:
|
||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 20 ml/m2 Dilution (%): Dilution (%): 3-5 Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||
|
Category(ies) of users |
Professional |
||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Jug, 0,5-5 L Light precluding HDPE Pouch, 0,01-1 L |
4.2.1. Use-specific instructions
Routine disinfection: Disinfection of surfaces which might be contaminated with pathogens during medical or nursing processes, on a regular basis to reduce the risk of transmission of such organisms via surfaces.
Non-routine disinfection: Disinfection in specific risk situations (unless differently regulated by national public health authorities).
The product is intended for one-step cleaning and disinfection. Fill the bucket with diluted product and distribute across floor using flat mop, wipe the surface with a clean, dry mop and let air dry. Do not rinse after use.
4.2.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 9.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 9.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 9.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 9.
4.3. Use description
Table 3
Disinfection of small and/or large non-food contact surfaces in institutional/commercial buildings by spraying using trigger sprayer and dry wipe or by wiping using single-use cloth and bucket, and/or floors by mopping using flat mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||||||||||||||||||||||||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||||||||||||||||||||||||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||||||||||||||||||||||||||||||||
|
Field(s) of use |
indoor use |
||||||||||||||||||||||||||||||||||||||||
|
Application method(s) |
Method: Spraying using trigger sprayer and dry wipe Detailed description: Routine disinfection of small surfaces in small non-food areas (e.g. bathrooms). Contact times for spraying and wiping at 20oC in dirty conditions:
Method: Wiping using single-use cloth/wipe and bucket Detailed description: Routine disinfection of small surfaces in small non-food areas (e.g. bathrooms). Contact times for wiping at 20oC in dirty conditions:
Method: Mopping using flat mop and bucket Detailed description: Routine disinfection of large surfaces in small non-food areas (e.g. bathrooms). Contact times for mopping at 20oC in dirty conditions:
Method: Spraying using trigger sprayer and dry wipe and mopping using flat mop and bucket Detailed description: Routine disinfection of small and large surfaces in small non-food areas (e.g. bathrooms). Contact times for spraying and wiping, mopping at 20oC in dirty conditions:
Method: Wiping using cloth/wipe and bucket and mopping using flat mop and bucket Detailed description: Routine disinfection of small and large surfaces in small non-food areas (e.g. bathrooms). Contact times for wiping and mopping at 20oC in dirty conditions:
|
||||||||||||||||||||||||||||||||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate for spraying: 10 ml/m2 Dilution (%): Dilution (%): 3-5 Number and timing of application: Application frequency for trigger spraying: up to 10 times per day per room Application rate: Application rate for wiping: 10 ml/m2 Dilution (%): 3-5 Number and timing of application: Application frequency for wiping: up to 10 times per day per room Application rate for mopping: 20 ml/m2 Dilution (%): 3-5 Number and timing of application: Application frequency for mopping: up to twice per day per room Application rate: Application rate for spraying: 10 ml/m2; Application rate for mopping: 20 ml/m2 Dilution (%): 3-5 Number and timing of application: Application frequency for combined trigger spraying and mopping: once per day per room. Application rate: Application rate for wiping: 10 ml/m2; Application rate for mopping: 20 ml/m2 Dilution (%): 3-5 Number and timing of application: Application frequency for combined wiping and mopping: once per day per room |
||||||||||||||||||||||||||||||||||||||||
|
Category(ies) of users |
Professional |
||||||||||||||||||||||||||||||||||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Jug, 0,5-5 L Light precluding HDPE Pouch, 0,01-1 L |
4.3.1. Use-specific instructions
Do not rinse after use.
Spraying: For optimum results, hold the bottle upright and spray from a distance of 30 cm. Spray the diluted product onto a dry wipe and wipe small surfaces such as worktops and equipment, or spray the diluted product onto the surface, wipe the surface with a clean, dry wipe or let air dry. Always close the nozzle after use. Used wipes must be disposed of in a closed container.
Wiping: Pour diluted product into a clean bucket and distribute across surface using single-use cloth/wipe, wipe the surface with a clean cloth/wipe and let air dry. Used wipes must be disposed of in a closed container.
Mopping: Fill the bucket with diluted product and distribute across floor using flat mop, wipe the surface with a clean, dry mop and let air dry.
4.3.2. Use-specific risk mitigation measures
Do not breathe vapours/spray.
For spraying: The area of the surface to be disinfected (in m2) must not be larger than 1/10 of the room volume (in m3) e.g. in a room of 120 m3 volume, the maximum surface to be disinfected is 12 m2.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 9.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 9.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 9.
4.4. Use description
Table 4
Disinfection of large non-food contact surfaces in institutional/commercial buildings by mopping using flat mop and bucket
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||
|
Field(s) of use |
indoor use |
||||||||
|
Application method(s) |
Method: Mopping using flat mop and bucket Detailed description: Routine disinfection of large surfaces in large non-food areas. Contact times for mopping at 20oC in dirty conditions:
|
||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 20 ml/m2 Dilution (%): 3-5 Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||
|
Category(ies) of users |
professional |
||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Jug, 0,5-5 L Light precluding HDPE Pouch, 0,01-1 L |
4.4.1. Use-specific instructions
Fill the bucket with diluted product and distribute across floor using flat mop, wipe the surface with a clean, dry mop and let air dry. Do not rinse after use.
4.4.2. Use-specific risk mitigation measures
Ensure technical ventilation with at least 15 air exchanges/hour.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 9.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 9.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 9.
4.5. Use description
Table 5
Disinfection of large non-food contact surfaces in institutional/commercial buildings by spraying using wall- mounted device
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||||||
|
Field(s) of use |
indoor use |
||||||
|
Application method(s) |
Method: Spraying with a wall- mounted device Detailed description: Routine disinfection of large surfaces in large non-food and food areas. Contact time for spraying at 20oC in dirty conditions:
Contact times for spraying at 20oC in clean conditions:
|
||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 180 ml/m2 Dilution (%): Dilution (%): 1,5-3 Number and timing of application: Application frequency: once per day per room |
||||||
|
Category(ies) of users |
professional |
||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Jug, 0,5-5 L Light precluding HDPE Pouch, 0,01-1 L |
4.5.1. Use-specific instructions
When used under clean conditions: clean surface before applying the product. Apply product via wall-mounted device. Rinse after application.
4.5.2. Use-specific risk mitigation measures
Do not breathe vapours/spray.
Ensure technical ventilation with at least 15 air exchanges/hour.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 9.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 9.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 9.
4.6. Use description
Table 6
Disinfection of large food contact surfaces in institutional/commercial buildings by spraying using trigger sprayer and dry wipe
|
Product type |
PT04: Food and feed area |
||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||
|
Field(s) of use |
indoor use |
||||||||
|
Application method(s) |
Method: Spraying using trigger spray and dry wipe Detailed description: Routine disinfection of large surfaces in large food areas (e.g. kitchens). Contact times for spraying and wiping at 20oC in dirty conditions:
|
||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 10 ml/m2 Dilution (%): Dilution (%): 3-5 Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||
|
Category(ies) of users |
Professional |
||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Jug, 0,5-5 L Light precluding HDPE Pouch, 0,01-1 L |
4.6.1. Use-specific instructions
For optimum results, hold the bottle upright and spray from a distance of 30 cm. Spray the diluted product onto a dry wipe and wipe small surfaces such as worktops and equipment or spray the diluted product onto the surface, wipe the surface with a clean, dry wipe and let air dry. Always close the nozzle after use. Do not rinse after use. Used wipes must be disposed of in a closed container.
4.6.2. Use-specific risk mitigation measures
Do not breathe vapours/spray.
Keep food, feed or beverages away from treated surface until dried. Do not use directly on or near food, feed or drinks.
The area of the surface to be disinfected (in m2) must not be larger than 1/10 of the room volume (in m3) e.g. in a room of 120 m3 volume, the maximum surface to be disinfected is 12 m2.
4.6.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 9.
4.6.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 9.
4.6.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 9.
4.7. Use description
Table 7
Disinfection of large food contact surfaces in institutional/commercial buildings by wiping using single-use cloth and bucket
|
Product type |
PT04: Food and feed area |
||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||
|
Field(s) of use |
indoor use |
||||||||
|
Application method(s) |
Method: Wiping using single-use cloth/wipe and bucket Detailed description: Routine disinfection of large surfaces in large food areas (e.g. kitchens). Contact times for wiping at 20oC in dirty conditions:
|
||||||||
|
Application rate(s) and frequency |
Application rate: 10 ml/m2 Dilution (%): 3-5 Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||
|
Category(ies) of users |
Professional |
||||||||
|
Pack sizes and packaging material |
Light precluding HDPE Bottle, 0,5-5 L Light precluding HDPE Jug, 0,5-5 L Light precluding HDPE Pouch, 0,01-1 L |
4.7.1. Use-specific instructions
Pour diluted product into a clean bucket and distribute across surface using single-use cloth/wipe, wipe the surface with a clean cloth/wipe and let air dry. Do not rinse after use. Used wipes must be disposed of in a closed container.
4.7.2. Use-specific risk mitigation measures
Keep food, feed or beverages away from treated surface until dried. Do not use directly on or near food, feed or drinks.
4.7.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 9.
4.7.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 9.
4.7.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 9.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 9
5.1. Instructions for use
Always read the label or leaflet before use and follow all the instructions. The product should be applied to a dry surface. Wet surface completely using the product. Do not use on surfaces sensitive to oxidative agents such as marble, copper or brass.
Dilution instruction (1,5 %): to produce 1 L of diluted surface disinfectant, add 15 ml of the concentrated product to approximately 500 ml of distilled water or water of equal quality (e.g. demineralised), mix and fill up to 1 L with distilled water or water of equal quality.
Dilution instruction (2%): to produce 1 L of diluted surface disinfectant, add 20 ml of the concentrated product to approximately 500 ml of distilled water or water of equal quality (e.g. demineralised), mix and fill up to 1 L with distilled water or water of equal quality.
Dilution instruction (3%): to produce 1 L of diluted surface disinfectant, add 30 ml of the concentrated product to approximately 500 ml of distilled water or water of equal quality (e.g. demineralised), mix and fill up to 1 L with distilled water or water of equal quality.
Dilution instruction (4%): to produce 1 L of diluted surface disinfectant, add 40 ml of the concentrated product to approximately 500 ml of distilled water or water of equal quality (e.g. demineralised), mix and fill up to 1 L with distilled water or water of equal quality.
Dilution instruction (5%): to produce 1 L of diluted surface disinfectant, add 50 ml of the concentrated product to approximately 500 ml of distilled water or water of equal quality (e.g. demineralised), mix and fill up to 1 L with distilled water or water of equal quality.
5.2. Risk mitigation measures
Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information).
The use of eye protection while handling the product is mandatory.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse immediately with plenty of water, including under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention immediately.
In case of skin contact: Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Seek medical attention immediately.
If swallowed: Rinse mouth with water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Seek medical attention immediately.
If inhaled: Remove person to fresh air. Treat symptomatically. Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers.
Storage temperature: 0-25 °C. Protect from frost.
Shelf life: 18 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 9
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
KitchenPro Oxy Des Concentrate |
Market area: EU |
|||||
|
Incidin OxyPro |
Market area: EU |
||||||
|
Sirafan Oxy Conc |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0011 1-9 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
7 % (w/w) |
||
|
Phosphoric acid |
Orthophosphoric acid |
Non-Active substance |
7664-38-2 |
231-633-2 |
1,5 % (w/w) |
||
|
Nitric acid |
Nitric acid |
Non-Active substance |
7697-37-2 |
231-714-2 |
3,71 % (w/w) |
||
|
Alcohol EO phosphate ester |
Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, mono-C8-10-alkyl ethers, phosphates |
Non-Active substance |
68130-47-2 |
|
14,625 % (w/w) |
||
|
Alkylpolyglycoside C8-C10 |
(3R,4S,5S,6R)-2-decoxy-6-(hydroxymethyl)oxane-3,4,5-triol |
Non-Active substance |
68515-73-1 |
500-220-1 |
6,35 % (w/w) |
||
|
Alcohols, C10-C16 ethoxylated propoxylated (Dehydol 980) |
Alcohols, C10-C16 ethoxylated propoxylated |
Non-Active substance |
69227-22-1 |
|
3 % (w/w) |
||
7.2. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Oasis Pro Oxy Des |
Market area: EU |
|||||
|
Maxx Oxy Des 2 |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0012 1-9 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
7 % (w/w) |
||
|
Phosphoric acid |
Orthophosphoric acid |
Non-Active substance |
7664-38-2 |
231-633-2 |
1,5 % (w/w) |
||
|
Nitric acid |
Nitric acid |
Non-Active substance |
7697-37-2 |
231-714-2 |
3,71 % (w/w) |
||
|
Alcohol EO phosphate ester |
Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, mono-C8-10-alkyl ethers, phosphates |
Non-Active substance |
68130-47-2 |
|
14,625 % (w/w) |
||
|
Alkylpolyglycoside C8-C10 |
(3R,4S,5S,6R)-2-decoxy-6-(hydroxymethyl)oxane-3,4,5-triol |
Non-Active substance |
68515-73-1 |
500-220-1 |
6,35 % (w/w) |
||
|
Alcohols, C10-C16 ethoxylated propoxylated (Dehydol 980) |
Alcohols, C10-C16 ethoxylated propoxylated |
Non-Active substance |
69227-22-1 |
|
3 % (w/w) |
||
1. META SPC 10 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 10 identifier
|
Identifier |
Meta SPC: META SPC 10 |
1.2. Suffix to the authorisation number
|
Number |
1-10 |
1.3. Product type(s)
|
Product type(s) |
PT01: Human hygiene |
2. META SPC 10 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 10
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
Active substance |
7722-84-1 |
231-765-0 |
1,4 - 1,61 % (w/w) |
|
Citric acid monohydrate |
2-hydroxypropane -1,2,3-tricarboxylic acid |
Non-Active substance |
5949-29-1 |
201-069-1 |
0,9 - 0,9 % (w/w) |
|
Phenoxyethanol |
2-Phenoxyethanol |
Non-Active substance |
122-99-6 |
204-589-7 |
0,9 - 0,9 % (w/w) |
|
Sodium lauryl Sulphate |
Sodium dodecyl sulphate |
Non-Active substance |
151-21-3 |
205-788-1 |
3,88 - 3,88 % (w/w) |
|
L-Glutamic acid, N-coco acyl derivs., monosodium salts |
Sodium;(4S)-4-amino-5-hydroxy-5-oxopentanoate |
Non-Active substance |
68187-32-6 |
269-087-2 |
2 - 2 % (w/w) |
|
Sulfuric acid, mono-C12-14-alkyl esters, ammonium salts (Texapon ALS) |
Sulfuric acid, mono-C12-14-alkyl esters, ammonium salts |
Non-Active substance |
90583-11-2 |
292-209-0 |
1,12 - 1,12 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 10
|
Formulation type(s) |
AL Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 10
|
Hazard statements |
H290: May be corrosive to metals. H319: Causes serious eye irritation. |
|
Precautionary statements |
P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P280: Wear eye protection. P280: Wear face protection. P390: Absorb spillage to prevent material damage. P406: Store in a a corrosion-resistant container with a resistant inner liner. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical attention. P337+P313: If eye irritation persists: Get medical advice. |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Hygienic hand wash
|
Product type |
PT01: Human hygiene |
||
|
Where relevant, an exact description of the authorised use |
- |
||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||
|
Field(s) of use |
indoor use |
||
|
Application method(s) |
Method: Direct application onto skin Detailed description: Antimicrobial hand soap, intended only as hygienic hand wash for food and beverage industry. Contact time at 20oC in dirty conditions:
|
||
|
Application rate(s) and frequency |
Application rate: Application rate: 3 ml of product per application Dilution (%): RTU product Number and timing of application: Application frequency: 1-10 times/day |
||
|
Category(ies) of users |
professional |
||
|
Pack sizes and packaging material |
Light precluding HDPE Jug, 1-100 L Light precluding HDPE Jerry can, 1-100 L Light precluding HDPE IBC, 600-1000 L Light precluding HDPE Drum, 60-220 L Light precluding HDPE Bottle, 0,1-5 L Light precluding HDPE Pouch, 0,5-100 L |
4.1.1. Use-specific instructions
See general directions for use of meta SPC 10.
4.1.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 10.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 10.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 10.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 10.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 10
5.1. Instructions for use
Apply approximately 3 ml of product to wet hands and rub for 60 seconds. Rinse thoroughly with running tap water for about 30 seconds.
5.2. Risk mitigation measures
Avoid splashes and spills.
Avoid hand to eye transfer.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse with water.
In case of skin contact: Rinse with water.
If swallowed: Rinse mouth. Seek medical attention if symptoms occur.
If inhaled: Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers.
Storage temperature: 0-25°C
Shelf life: 18 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 10
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Manosan Oxy |
Market area: EU |
|||||
|
Authorisation number |
|
EU-0024303-0013 1-10 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
Active substance |
7722-84-1 |
231-765-0 |
1,4 % (w/w) |
||
|
Citric acid monohydrate |
2-hydroxypropane -1,2,3-tricarboxylic acid |
Non-Active substance |
5949-29-1 |
201-069-1 |
0,9 % (w/w) |
||
|
Phenoxyethanol |
2-Phenoxyethanol |
Non-Active substance |
122-99-6 |
204-589-7 |
0,9 % (w/w) |
||
|
Sodium lauryl Sulphate |
Sodium dodecyl sulphate |
Non-Active substance |
151-21-3 |
205-788-1 |
3,88 % (w/w) |
||
|
L-Glutamic acid, N-coco acyl derivs., monosodium salts |
Sodium;(4S)-4-amino-5-hydroxy-5-oxopentanoate |
Non-Active substance |
68187-32-6 |
269-087-2 |
2 % (w/w) |
||
|
Sulfuric acid, mono-C12-14-alkyl esters, ammonium salts (Texapon ALS) |
Sulfuric acid, mono-C12-14-alkyl esters, ammonium salts |
Non-Active substance |
90583-11-2 |
292-209-0 |
1,12 % (w/w) |
||
1. META SPC 11 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 11 identifier
|
Identifier |
Meta SPC: META SPC 11 |
1.2. Suffix to the authorisation number
|
Number |
1-11 |
1.3. Product type(s)
|
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
2. META SPC 11 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 11
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1,5 - 1,5 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 11
|
Formulation type(s) |
AL Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 11
|
Hazard statements |
|
|
Precautionary statements |
|
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of life sciences cleanrooms by wiping using impregnated RTU wipes
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data |
||||||||||
|
Field(s) of use |
indoor use |
||||||||||
|
Application method(s) |
Method: Wiping using impregnated RTU wipes Detailed description: Disinfection of small surfaces, materials and equipment in life sciences cleanrooms and supporting environments (e.g. pharmaceutical industry) and transfer disinfection. Contact times for wiping at 20oC in dirty conditions:
Contact times for wiping at 20oC in clean conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 1 wipe per m2 (corresponding to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||||||
|
Category(ies) of users |
professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding PET or PE Bucket with 10-5000 impregnated 45% polyester / 55% cellulose blend wipes (wipe size: 420x250 mm or 200x200 mm). Light precluding PET/PE or EVA/PP or Aluminum/PE Pouch or PE Pouch with 10-100 impregnated 45% polyester / 55% cellulose blend wipes (wipe size: 420x250 mm or 200x200 mm) |
4.1.1. Use-specific instructions
See general directions for use of meta SPC 11.
4.1.2. Use-specific risk mitigation measures
-
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 11.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 11.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 11.
4.2. Use description
Table 2
Disinfection of life sciences cleanrooms by mopping using impregnated RTU mop wipes
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data |
||||||||||
|
Field(s) of use |
indoor use |
||||||||||
|
Application method(s) |
Method: Mopping using impregnated RTU mop wipes Detailed description: Disinfection of floors in life sciences cleanrooms and supporting environments (e.g. pharmaceutical industry).Contact times for wiping at 20oC in dirty conditions:
Contact times for wiping at 20oC in clean conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: 1 wipe per m2 (corresponding to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||||||
|
Category(ies) of users |
Professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding PET or PE Bucket with 10-5000 impregnated 45% polyester / 55% cellulose blend wipes (wipe size: 420x250 mm or 200x200 mm) Light precluding PET/PE or EVA/PP or Aluminum/PE Pouch or PE Pouch with 10-100 impregnated 45% polyester / 55% cellulose blend wipes (wipe size: 420x250 mm or 200x200 mm) |
4.2.1. Use-specific instructions
See general directions for use of meta SPC 11.
4.2.2. Use-specific risk mitigation measures
-
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 11.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 11.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 11.
4.3. Use description
Table 3
Disinfection of small non-food contact surfaces in health care applications by wiping using impregnated RTU wipes
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: No data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||
|
Field(s) of use |
indoor use |
||||||||
|
Application method(s) |
Method: Wiping using impregnated RTU wipes Detailed description: Routine disinfection of smaller surfaces in hospital rooms and medical practices that are not frequently touched by people. Contact times for wiping at 20oC in clean conditions:
Contact times for wiping at 20oC in dirty conditions:
|
||||||||
|
Application rate(s) and frequency |
Application rate: 1 wipe per m2 (corresponding to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to twice per day per room |
||||||||
|
Category(ies) of users |
Professional |
||||||||
|
Pack sizes and packaging material |
Light precluding pre-printed pouch with 10-100 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). Light precluding PET canister with 10-1000 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). Light precluding PET bucket with 10-1000 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). Light precluding PET pouch with 10-1000 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). |
4.3.1. Use-specific instructions
Routine disinfection: Disinfection of surfaces, which might be contaminated with pathogens during medical or nursing processes, on a regular basis to reduce the risk of transmission of such organisms via surfaces.
4.3.2. Use-specific risk mitigation measures
-
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 11.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 11.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 11.
4.4. Use description
Table 4
Disinfection of small non-food contact surfaces in institutional/commercial buildings by wiping using impregnated RTU wipes
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: No data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||
|
Field(s) of use |
indoor use |
||||||||||
|
Application method(s) |
Method: Wiping using impregnated RTU wipes Detailed description: Routine disinfection of small surfaces in small non-food areas (e.g. bathrooms). Contact times for wiping at 20oC in clean conditions:
Contact times for wiping at 20oC in dirty conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 1 wipe per m2 (corresponding to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||||
|
Category(ies) of users |
Professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding pre-printed pouch with 10-100 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). Light precluding PET canister with 10-1000 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). Light precluding PET bucket with 10-1000 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). Light precluding PET pouch with 10-1000 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). |
4.4.1. Use-specific instructions
See general directions for use of meta SPC 11.
4.4.2. Use-specific risk mitigation measures
-
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 11.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 11.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 11.
4.5. Use description
Table 5
Disinfection of small food contact surfaces in institutional/commercial buildings by wiping using impregnated RTU wipes
|
Product type |
PT04: Food and feed area |
||||||||||
|
Where relevant, an exact description of the authorised use |
- |
||||||||||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: No data Scientific name: Fungi Common name: fungi Development stage: no data Scientific name: Mycobacteria Common name: Mycobacteria Development stage: no data Scientific name: Bacterial spores Common name: Bacterial spores Development stage: no data Scientific name: Clostridium difficile Common name: Bacterial spores Development stage: no data Scientific name: Viruses Common name: Viruses Development stage: no data |
||||||||||
|
Field(s) of use |
indoor use |
||||||||||
|
Application method(s) |
Method: Wiping using impregnated RTU wipes Detailed description: Routine disinfection of small surfaces in small food areas (e.g. kitchens). Contact times for wiping at 20oC in clean conditions:
Contact time for wiping at 20oC in dirty conditions:
|
||||||||||
|
Application rate(s) and frequency |
Application rate: Application rate: 1 wipe per m2 (corresponding to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to 10 times per day per room |
||||||||||
|
Category(ies) of users |
Professional |
||||||||||
|
Pack sizes and packaging material |
Light precluding pre-printed pouch with 10-100 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). Light precluding PET canister with 10-1000 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). Light precluding PET bucket with 10-1000 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). Light precluding PET pouch with 10-1000 impregnated 60% polyester / 40% lyocell blend wipes (wipe size: 420x250 mm or 200x200 mm). |
4.5.1. Use-specific instructions
See general directions for use of meta SPC 11.
4.5.2. Use-specific risk mitigation measures
Keep food, feed or beverages away from treated surface until dried. Do not use directly on or near food, feed or drinks.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 11.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 11.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 11.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 11
5.1. Instructions for use
The product is intended for one-step cleaning and disinfection. Always read the label or leaflet before use and follow all the instructions. When used under clean conditions: clean surface before applying the product. Apply product to a dry surface. Wet surface completely using the product. Allow surface to air dry. Do not rinse after use. Close container when not in use. Do not use wipes which have become dehydrated. Dispose of the container when empty. Do not use on surfaces sensitive to oxidative agents such as marble, copper or brass. Used wipes must be disposed of in a closed container.
5.2. Risk mitigation measures
-
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse with plenty of water.
In case of skin contact: Rinse with plenty of water.
If swallowed: Rinse mouth. Seek medical attention if symptoms occur.
If inhaled: Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels.
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers.
Storage temperature: 0-35 °C. Protect from frost.
Shelf life: 18 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 11
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Klerwipe Sporicidal Enhanced Peroxide |
Market area: EU |
|||||
|
Anios Low Peroxide IP sterile wipes |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0014 1-11 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
1,5 % (w/w) |
||
7.2. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
Incidin OxyWipe S |
Market area: EU |
|||||
|
KitchenPro Oxy Wipes S |
Market area: EU |
||||||
|
Sirafan Oxy Wipes |
Market area: EU |
||||||
|
Authorisation number |
|
EU-0024303-0015 1-11 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
Active substance |
7722-84-1 |
231-765-0 |
1,5 % (w/w) |
||
1. META SPC 12 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 12 identifier
|
Identifier |
Meta SPC: META SPC 12 |
1.2. Suffix to the authorisation number
|
Number |
1-12 |
1.3. Product type(s)
|
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area |
2. META SPC 12 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 12
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Hydrogen peroxide |
|
active substance |
7722-84-1 |
231-765-0 |
2 - 2,3 % (w/w) |
|
N-propanol |
Propan-1-ol |
Non-Active substance |
71-23-8 |
200-746-9 |
17,5 - 17,5 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 12
|
Formulation type(s) |
AL Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 12
|
Hazard statements |
H226: Flammable liquid and vapour. H318: Causes serious eye damage. |
|
Precautionary statements |
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof ventilating equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P280: Wear eye protection. P280: Wear face protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER. P310: Immediately call a doctor. P370+P378: In case of fire: Use water to extinguish. P403+P235: Store in a well-ventilated place. Keep cool. P501: Dispose of contents to in accordance with national regulations. P501: Dispose of container to in accordance with national regulations. |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of surfaces in industry (e.g. dining areas, bathrooms) by wiping using impregnated RTU wipes
|
Product type |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
||
|
Where relevant, an exact description of the authorised use |
- |
||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||
|
Field(s) of use |
indoor use |
||
|
Application method(s) |
Method: Wiping using impregnated RTU wipes Detailed description: Disinfection of surfaces in industry (e.g. dining areas, bathrooms). Contact time for wiping at 10oC and 20oC in dirty conditions:
|
||
|
Application rate(s) and frequency |
Application rate: Application rate: 1 wipe per m2 (corresponding to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to 3 times per day |
||
|
Category(ies) of users |
Professional |
||
|
Pack sizes and packaging material |
Light precluding PP Bucket with 10-5000 impregnated non-woven, 100% polypropylene wipes (wipe size: 200x250 mm). Light precluding PE Pouch with 10-5000 impregnated non-woven, 100% polypropylene wipes (wipe size: 200x250 mm). |
4.1.1. Use-specific instructions
See general directions for use of meta SPC 12.
4.1.2. Use-specific risk mitigation measures
See general directions for use of meta SPC 12.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 12.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 12.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 12.
4.2. Use description
Table 2
Disinfection of food contact surfaces in food and beverage industry by wiping using impregnated RTU wipes
|
Product type |
PT04: Food and feed area |
||
|
Where relevant, an exact description of the authorised use |
- |
||
|
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: Bacteria Development stage: no data Scientific name: Yeasts Common name: Yeasts Development stage: no data |
||
|
Field(s) of use |
indoor use |
||
|
Application method(s) |
Method: Wiping using impregnated RTU wipes Detailed description: Disinfection of small surfaces in food processing plants. Contact time for wiping at 10oC and 20oC in dirty conditions:
|
||
|
Application rate(s) and frequency |
Application rate: Application rate: 1 wipe per m2 (corresponding to 10 ml/m2) Dilution (%): RTU product Number and timing of application: Application frequency: up to 4 times per day |
||
|
Category(ies) of users |
professional |
||
|
Pack sizes and packaging material |
Light precluding PP Bucket with 10-5000 impregnated non-woven, 100% polypropylene wipes (wipe size: 200x250 mm). Light precluding PE Pouch with 10-5000 impregnated non-woven, 100% polypropylene wipes (wipe size: 200x250 mm). |
4.2.1. Use-specific instructions
See general directions for use of meta SPC 12.
4.2.2. Use-specific risk mitigation measures
Keep food, feed or beverages away from treated surface until dried. Do not use directly on or near food, feed or drinks.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use of meta SPC 12.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use of meta SPC 12.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use of meta SPC 12.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 12
5.1. Instructions for use
Always read the label or leaflet before use and follow all the instructions. The product should be applied to a dry surface. Wet surface completely using the product. Allow surface to air dry after using the product. Do not rinse after use. Close container when not in use. Do not use wipes which have become dehydrated. Dispose of the container when empty. Do not use on surfaces sensitive to oxidative agents such as marble, copper or brass. Used wipes must be disposed of in closed container.
5.2. Risk mitigation measures
Avoid hand to eye transfer.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
FIRST AID MEASURES
In case of eye contact: Rinse immediately with plenty of water, including under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention immediately.
In case of skin contact: Rinse with plenty of water.
If swallowed: Rinse mouth. Seek medical attention if symptoms occur.
If inhaled: Remove person to fresh air. Treat symptomatically. Seek medical attention if symptoms occur.
ENVIRONMENTAL EMERGENCY MEASURES
Do not allow contact with soil, surface or ground water.
Consider the provision of containment around storage vessels
5.4. Instructions for safe disposal of the product and its packaging
Product: Where possible, recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with national regulations. Dispose of waste in an approved waste disposal facility.
Contaminated packaging: Dispose of container in accordance with national regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Keep out of reach of children. Keep container tightly closed. Store in suitable, labelled containers. Keep away from heat and sources of ignition. Keep in a cool, well-ventilated place. Keep away from oxidizing agents.
Storage temperature: 0-30°C.
Shelf life: 12 months
6. OTHER INFORMATION
The product contains hydrogen peroxide (CAS No.: 7722-84-1), for which a European reference value of 1,25 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 12
7.1. Trade name(s), authorisation number and specific composition of each individual product
|
Trade name(s) |
OxyDes Maxi Wipes |
Market area: EU |
|||||
|
Authorisation number |
|
EU-0024303-0016 1-12 |
|||||
|
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
||
|
Hydrogen peroxide |
|
Active substance |
7722-84-1 |
231-765-0 |
2 % (w/w) |
||
|
N-propanol |
Propan-1-ol |
Non-Active substance |
71-23-8 |
200-746-9 |
17,5 % (w/w) |
||
ELI: http://data.europa.eu/eli/reg_impl/2025/223/oj
ISSN 1977-0677 (electronic edition)