This document is an excerpt from the EUR-Lex website
Document 02022R1452-20240923
Commission Implementing Regulation (EU) 2022/1452 of 1 September 2022 concerning the authorisation of 3-ethylcyclopentan-1,2-dione, 4-hydroxy-2,5-dimethylfuran-3(2H)-one, 4,5-dihydro-2-methylfuran-3(2H)-one, eugenol, 1-methoxy-4-(prop-1(trans)-enyl)benzene, α-pentylcinnamaldehyde, α-hexylcinnamaldehyde and 2-acetylpyridine as feed additives for certain animal species (Text with EEA relevance)
Consolidated text: Commission Implementing Regulation (EU) 2022/1452 of 1 September 2022 concerning the authorisation of 3-ethylcyclopentan-1,2-dione, 4-hydroxy-2,5-dimethylfuran-3(2H)-one, 4,5-dihydro-2-methylfuran-3(2H)-one, eugenol, 1-methoxy-4-(prop-1(trans)-enyl)benzene, α-pentylcinnamaldehyde, α-hexylcinnamaldehyde and 2-acetylpyridine as feed additives for certain animal species (Text with EEA relevance)
Commission Implementing Regulation (EU) 2022/1452 of 1 September 2022 concerning the authorisation of 3-ethylcyclopentan-1,2-dione, 4-hydroxy-2,5-dimethylfuran-3(2H)-one, 4,5-dihydro-2-methylfuran-3(2H)-one, eugenol, 1-methoxy-4-(prop-1(trans)-enyl)benzene, α-pentylcinnamaldehyde, α-hexylcinnamaldehyde and 2-acetylpyridine as feed additives for certain animal species (Text with EEA relevance)
ELI: http://data.europa.eu/eli/reg_impl/2022/1452/2024-09-23
02022R1452 — EN — 23.09.2024 — 002.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
|
COMMISSION IMPLEMENTING REGULATION (EU) 2022/1452 of 1 September 2022 concerning the authorisation of 3-ethylcyclopentan-1,2-dione, 4-hydroxy-2,5-dimethylfuran-3(2H)-one, 4,5-dihydro-2-methylfuran-3(2H)-one, eugenol, 1-methoxy-4-(prop-1(trans)-enyl)benzene, α-pentylcinnamaldehyde, α-hexylcinnamaldehyde and 2-acetylpyridine as feed additives for certain animal species (OJ L 228 2.9.2022, p. 17) |
Amended by:
|
|
|
Official Journal |
||
|
No |
page |
date |
||
|
COMMISSION IMPLEMENTING REGULATION (EU) 2023/585 of 15 March 2023 |
L 77 |
7 |
16.3.2023 |
|
|
COMMISSION IMPLEMENTING REGULATION (EU) 2024/2179 of 2 September 2024 |
L 2179 |
1 |
3.9.2024 |
|
COMMISSION IMPLEMENTING REGULATION (EU) 2022/1452
of 1 September 2022
concerning the authorisation of 3-ethylcyclopentan-1,2-dione, 4-hydroxy-2,5-dimethylfuran-3(2H)-one, 4,5-dihydro-2-methylfuran-3(2H)-one, eugenol, 1-methoxy-4-(prop-1(trans)-enyl)benzene, α-pentylcinnamaldehyde, α-hexylcinnamaldehyde and 2-acetylpyridine as feed additives for certain animal species
(Text with EEA relevance)
Article 1
Authorisation
The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as additives in animal nutrition, subject to the conditions laid down in that Annex.
Article 2
Transitional measures
Article 3
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
ANNEX
|
Identification number of the additive |
Additive |
Composition, chemical formula, description, analytical method |
Species or category of animal |
Maximum age |
Minimum content |
Maximum content |
Other provisions |
End of period of authorisation |
|
mg of additive/kg of complete feedingstuff with a moisture content of 12 % |
||||||||
|
Category: Sensory additives. Functional group: Flavouring compounds |
||||||||
|
2b07057 |
3-Ethylcyclopentan-1,2-dione |
Additive composition Preparation of 3-ethylcyclopentan-1,2-dione Characterisation of active substance 3-Ethylcyclopentan-1,2-dione Produced by chemical synthesis Purity: > 90 % Chemical formula: C7H10O2 CAS number: 21835-01-8 FLAVIS: 07.057 |
All animal species |
- |
- |
- |
1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: – animals farmed in marine aquaculture systems: 0,05 mg; — cats, dogs and animals farmed in land-based aquaculture systems: 5 mg/kg; — other terrestrial species or categories of animals: 0,5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. |
22 September 2032 |
|
Analytical method (1) For the identification of the additive in mixtures of flavourings: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL |
||||||||
|
(1)
Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en |
||||||||
|
Identification number of the additive |
Additive |
Composition, chemical formula, description, analytical method |
Species or category of animal |
Maximum age |
Minimum content |
Maximum content |
Other provisions |
End of period of authorisation |
|
mg of additive/kg of complete feedingstuff with a moisture content of 12 % |
||||||||
|
Category: Sensory additives. Functional group: Flavouring compounds |
||||||||
|
2b13010 |
4-Hydroxy-2,5-dimethylfuran-3(2H)-one |
Additive composition 4-Hydroxy-2,5-dimethylfuran-3(2H)-one Characterisation of active substance 4-Hydroxy-2,5-dimethylfuran-3(2H)-one Produced by chemical synthesis Purity: 98 % Chemical formula: C6H8O3 CAS number: 3658-77-3 FLAVIS: 13.010 |
Cats and dogs |
- |
- |
- |
1. The additive shall be incorporated into the feed in the form of a premixture. — cats: 18 mg — dogs: 25 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. |
22 September 2032 |
|
Analytical method (1) For the identification of the additive in mixtures of flavourings: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL |
||||||||
|
(1)
Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en |
||||||||
|
Identification number of the additive |
Additive |
Composition, chemical formula, description, analytical method |
Species or category of animal |
Maximum age |
Minimum content |
Maximum content |
Other provisions |
End of period of authorisation |
|
mg of additive/kg of complete feedingstuff with a moisture content of 12 % |
||||||||
|
Category: Sensory additives. Functional group: Flavouring compounds |
||||||||
|
2b13042 |
4,5-Dihydro-2-methylfuran-3(2H)-one |
Additive composition 4,5-Dihydro-2-methylfuran-3(2H)-one Characterisation of active substance 4,5-Dihydro-2-methylfuran-3(2H)-one Produced by chemical synthesis Purity: 97 % Chemical formula: C5H8O2 CAS number: 3188-00-9 FLAVIS: 13.042 |
Cats and dogs |
- |
- |
- |
1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: — cats and dogs: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. |
22 September 2032 |
|
Analytical method (1) For the identification of the additive in mixtures of flavourings: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL |
||||||||
|
(1)
Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en |
||||||||
|
Identification number of the additive |
Additive |
Composition, chemical formula, description, analytical method |
Species or category of animal |
Maximum age |
Minimum content |
Maximum content |
Other provisions |
End of period of authorisation |
|
mg of additive/kg of complete feedingstuff with a moisture content of 12 % |
||||||||
|
Category: Sensory additives. Functional group: Flavouring compounds |
||||||||
|
2b04003 |
Eugenol |
Additive composition Eugenol Characterisation of active substance Eugenol ►M1 Produced by chemical synthesis or by the extraction from cloves or cloves oil ◄ Purity: > 98 % Chemical formula: C10H12O2 CAS number: 97-53-0 FLAVIS: 04.003 |
All animal species except poultry and fish |
- |
- |
- |
1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: — all animal species except poultry and fish: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. |
22 September 2032 |
|
Analytical method (1) For the identification of the additive in mixtures of flavourings: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL |
|
- |
- |
- |
||||
|
(1)
Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en |
||||||||
|
Identification number of the additive |
Additive |
Composition, chemical formula, description, analytical method |
Species or category of animal |
Maximum age |
Minimum content |
Maximum content |
Other provisions |
End of period of authorisation |
|
mg of additive/kg of complete feedingstuff with a moisture content of 12 % |
||||||||
|
Category: Sensory additives. Functional group: Flavouring compounds |
||||||||
|
2b04010 |
1-Methoxy-4-(prop-1(trans)-enyl)benzene |
Additive composition 1-Methoxy-4-(prop-1(trans)-enyl)benzene Characterisation of active substance 1-Methoxy-4-(prop-1(trans)-enyl)benzene ►M1 Produced by chemical synthesis or by the extraction from pine oil ◄ Purity: > 99 % Chemical formula: C10H12O CAS number: 4180-23-8 FLAVIS: 04.010 |
All animal species except poultry and fish |
- |
- |
- |
1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: — all animal species except poultry and fish: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. |
22 September 2032 |
|
Analytical method (1) For the identification of the additive in mixtures of flavourings: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL |
||||||||
|
(1)
Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en |
||||||||
|
Identification number of the additive |
Additive |
Composition, chemical formula, description, analytical method |
Species or category of animal |
Maximum age |
Minimum content |
Maximum content |
Other provisions |
End of period of authorisation |
|
mg of additive/kg of complete feedingstuff with a moisture content of 12 % |
||||||||
|
Category: Sensory additives. Functional group: Flavouring compounds |
||||||||
|
2b05040 |
α-Pentylcinnamaldehyde |
Additive composition α-Pentylcinnamaldehyde Characterisation of active substance α-Pentylcinnamaldehyde Produced by chemical synthesis Purity: min. 97 % Chemical formula: C14H18O CAS number: 122-40-7 FLAVIS: 05.040 |
All animal species |
- |
- |
- |
1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: — animals farmed in marine aquaculture systems: — 0,05 mg; — cats: 1 mg/kg; — dogs and animals farmed in land-based aquaculture systems: 5 mg/kg; — other terrestrial species or categories of animals: 0,1 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. |
22 September 2032 |
|
Analytical method (1) For the identification of the additive in mixtures of flavourings: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL |
||||||||
|
(1)
Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en |
||||||||
|
Identification number of the additive |
Additive |
Composition, chemical formula, description, analytical method |
Species or category of animal |
Maximum age |
Minimum content |
Maximum content |
Other provisions |
End of period of authorisation |
|
mg of additive/kg of complete feedingstuff with a moisture content of 12 % |
||||||||
|
Category: Sensory additives. Functional group: Flavouring compounds |
||||||||
|
2b05041 |
α-Hexylcinnamaldehyde |
Additive composition α-Hexylcinnamaldehyde Characterisation of active substance α-Hexylcinnamaldehyde Produced by chemical synthesis Purity: 95 % Chemical formula: C15H20O CAS number: 101-86-0 FLAVIS: 05.041 |
All animal species |
- |
- |
- |
1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: — animals farmed in marine aquaculture systems: — 0,05 mg; — cats: 1 mg/kg; — dogs and animals farmed in land-based aquaculture systems: 5 mg/kg; — other terrestrial species or categories of animals: 0,1 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. |
22 September 2032 |
|
Analytical method (1) For the identification of the additive in mixtures of flavourings: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL |
||||||||
|
(1)
Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en |
||||||||
|
Identification number of the additive |
Additive |
Composition, chemical formula, description, analytical method |
Species or category of animal |
Maximum age |
Minimum content |
Maximum content |
Other provisions |
End of period of authorisation |
|
mg of additive/kg of complete feedingstuff with a moisture content of 12 % |
||||||||
|
Category: Sensory additives. Functional group: Flavouring compounds |
||||||||
|
2b14038 |
2-Acetylpyridine |
Additive composition 2-Acetylpyridine Characterisation of active substance 2-Acetylpyridine Produced by chemical synthesis Purity: > 97 % Chemical formula: C7H7ON CAS number: 1122-62-9 FLAVIS: 14.038 |
All animal species |
- |
- |
- |
1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: — marine animals: — 0,05 mg; — other species or categories of animals: 0,5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. |
22 September 2032 |
|
Analytical method (1) For the identification of the additive in mixtures of flavourings: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL |
||||||||
|
(1)
Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en |
||||||||