Access to European Union law
<a href="https://eur-lex.europa.eu/content/help/eurlex-content/experimental-features.html" target="_blank">More about the experimental features corner</a>
Choose the experimental features you want to try
EUR-Lex
Access to European Union law

This document is an excerpt from the EUR-Lex website

You are here
Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search

Document 32022R0001R(01)

Corrigendum to Commission Delegated Regulation (EU) 2022/1 of 20 October 2021 amending Regulation (EU) 2021/821 of the European Parliament and of the Council as regards the list of dual-use items (Official Journal of the European Union L 3 of 6 January 2022)

OJ L 20, 31.1.2022, p. 282–282 (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

ELI: http://data.europa.eu/eli/reg_del/2022/1/corrigendum/2022-01-31/oj

31.1.2022   

EN

Official Journal of the European Union

L 20/282

Corrigendum to Commission Delegated Regulation (EU) 2022/1 of 20 October 2021 amending Regulation (EU) 2021/821 of the European Parliament and of the Council as regards the list of dual-use items

( Official Journal of the European Union L 3 of 6 January 2022 )

On page 142, in the Annex, point 3B001.f is replaced as follows:

‘f.

Lithography equipment as follows:

1.

Align and expose step and repeat (direct step on wafer) or step and scan (scanner) equipment for wafer processing using photo-optical or X-ray methods and having any of the following:

a.

A light source wavelength shorter than 193 nm; or

b.

Capable of producing a pattern with a 'Minimum Resolvable Feature size' (MRF) of 45 nm or less;

Technical Note:

The 'Minimum Resolvable Feature size' (MRF) is calculated by the following formula:

Image 1

where the K factor = 0,35

2.

Imprint lithography equipment capable of producing features of 45 nm or less;

Note:

3B001.f.2. includes:

—

Micro contact printing tools

—

Hot embossing tools

—

Nano-imprint lithography tools

—

Step and flash imprint lithography (S-FIL) tools

3.

Equipment specially designed for mask making having all of the following:

a.

A deflected focussed electron beam, ion beam or "laser" beam; and

b.

Having any of the following:

1.

A full-width half-maximum (FWHM) spot size smaller than 65 nm and an image placement less than 17 nm (mean + 3 sigma); or

2.

Not used;

3.

A second-layer overlay error of less than 23 nm (mean + 3 sigma) on the mask;

4.

Equipment designed for device processing using direct writing methods, having all of the following:

a.

A deflected focused electron beam; and

b.

Having any of the following:

1.

A minimum beam size equal to or smaller than 15 nm; or

2.

An overlay error less than 27 nm (mean + 3 sigma);’.
Top