EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 02021R2139-20240101

Consolidated text: Commission Delegated Regulation (EU) 2021/2139 of 4 June 2021 supplementing Regulation (EU) 2020/852 of the European Parliament and of the Council by establishing the technical screening criteria for determining the conditions under which an economic activity qualifies as contributing substantially to climate change mitigation or climate change adaptation and for determining whether that economic activity causes no significant harm to any of the other environmental objectives (Text with EEA relevance)Text with EEA relevance

ELI: http://data.europa.eu/eli/reg_del/2021/2139/2024-01-01

This consolidated text may not include the following amendments:

Amending act Amendment type Subdivision concerned Date of effect
32023R2485 Modified by annex II appendix C point (g) 01/01/2025
32023R2485 Modified by annex I appendix C point (f) unnumbered paragraph 01/01/2025

02021R2139 — EN — 01.01.2024 — 002.001


This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document

►B

COMMISSION DELEGATED REGULATION (EU) 2021/2139

of 4 June 2021

supplementing Regulation (EU) 2020/852 of the European Parliament and of the Council by establishing the technical screening criteria for determining the conditions under which an economic activity qualifies as contributing substantially to climate change mitigation or climate change adaptation and for determining whether that economic activity causes no significant harm to any of the other environmental objectives

(Text with EEA relevance)

(OJ L 442 9.12.2021, p. 1)

Amended by:

 

 

Official Journal

  No

page

date

►M1

COMMISSION DELEGATED REGULATION (EU) 2022/1214 of 9 March 2022

  L 188

1

15.7.2022

►M2

COMMISSION DELEGATED REGULATION (EU) 2023/2485 of 27 June 2023

  L 

1

21.11.2023




▼B

COMMISSION DELEGATED REGULATION (EU) 2021/2139

of 4 June 2021

supplementing Regulation (EU) 2020/852 of the European Parliament and of the Council by establishing the technical screening criteria for determining the conditions under which an economic activity qualifies as contributing substantially to climate change mitigation or climate change adaptation and for determining whether that economic activity causes no significant harm to any of the other environmental objectives

(Text with EEA relevance)



Article 1

The technical screening criteria for determining the conditions under which an economic activity qualifies as contributing substantially to climate change mitigation and for determining whether that economic activity causes no significant harm to any of the other environmental objectives laid down in Article 9 of Regulation (EU) 2020/852 are set out in Annex I to this Regulation.

Article 2

The technical screening criteria for determining the conditions under which an economic activity qualifies as contributing substantially to climate change adaptation and for determining whether that economic activity causes no significant harm to any of the other environmental objectives laid down in Article 9 of Regulation (EU) 2020/852 are set out in Annex II to this Regulation.

▼M1

Article 2a

Review

When performing the review referred to in Article 19(5) of Regulation (EU) 2020/852, the Commission shall also review and assess the necessity to amend the dates referred to in Annex I, Section 4.27, Section 4.28, Section 4.29, point 1(b), Section 4.30, point 1(b) and Section 4.31, point 1(b).

Any review of the date referred to in point (2) of Sections 4.27 and 4.28 to Annex I shall take into account the technical progress in accident-tolerant fuel commercialisation in the Union and worldwide.

▼B

Article 3

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2022.

This Regulation shall be binding in its entirety and directly applicable in all Member States.




ANNEX I

Technical screening criteria for determining the conditions under which an economic activity qualifies as contributing substantially to climate change mitigation and for determining whether that economic activity causes no significant harm to any of the other environmental objectives

TABLE OF CONTENTS

1.

Forestry

1.1.

Afforestation

1.2.

Rehabilitation and restoration of forests, including reforestation and natural forest regeneration after an extreme event

1.3.

Forest management

1.4.

Conservation forestry

2.

Environmental protection and restoration activities

2.1.

Restoration of wetlands

3.

Manufacturing

3.1.

Manufacture of renewable energy technologies

3.2.

Manufacture of equipment for the production and use of hydrogen

3.3.

Manufacture of low carbon technologies for transport

3.4.

Manufacture of batteries

3.5.

Manufacture of energy efficiency equipment for buildings

3.6.

Manufacture of other low carbon technologies

3.7.

Manufacture of cement

3.8.

Manufacture of aluminium

3.9.

Manufacture of iron and steel

3.10.

Manufacture of hydrogen

3.11.

Manufacture of carbon black

3.12.

Manufacture of soda ash

3.13.

Manufacture of chlorine

3.14.

Manufacture of organic basic chemicals

3.15.

Manufacture of anhydrous ammonia

3.16.

Manufacture of nitric acid

3.17.

Manufacture of plastics in primary form

4.

Energy

4.1.

Electricity generation using solar photovoltaic technology

4.2.

Electricity generation using concentrated solar power (CSP) technology

4.3.

Electricity generation from wind power

4.4.

Electricity generation from ocean energy technologies

4.5.

Electricity generation from hydropower

4.6.

Electricity generation from geothermal energy

4.7.

Electricity generation from renewable non-fossil gaseous and liquid fuels

4.8.

Electricity generation from bioenergy

4.9.

Transmission and distribution of electricity

4.10.

Storage of electricity

4.11.

Storage of thermal energy

4.12.

Storage of hydrogen

4.13.

Manufacture of biogas and biofuels for use in transport and of bioliquids

4.14.

Transmission and distribution networks for renewable and low-carbon gases

4.15.

District heating/cooling distribution

4.16.

Installation and operation of electric heat pumps

4.17.

Cogeneration of heat/cool and power from solar energy

4.18.

Cogeneration of heat/cool and power from geothermal energy

4.19.

Cogeneration of heat/cool and power from renewable non-fossil gaseous and liquid fuels

4.20.

Cogeneration of heat/cool and power from bioenergy

4.21.

Production of heat/cool from solar thermal heating

4.22.

Production of heat/cool from geothermal energy

4.23.

Production of heat/cool from renewable non-fossil gaseous and liquid fuels

4.24.

Production of heat/cool from bioenergy

4.25.

Production of heat/cool using waste heat

4.26.

Pre-commercial stages of advanced technologies to produce energy from nuclear processes with minimal waste from the fuel cycle

4.27.

Construction and safe operation of new nuclear power plants, for the generation of electricity or heat, including for hydrogen production, using best-available technologies

4.28.

Electricity generation from nuclear energy in existing installations

4.29.

Electricity generation from fossil gaseous fuels

4.30.

High-efficiency co-generation of heat/cool and power from fossil gaseous fuels

4.31.

Production of heat/cool from fossil gaseous fuels in an efficient district heating and cooling system

5.

Water supply, sewerage, waste management and remediation

5.1.

Construction, extension and operation of water collection, treatment and supply systems

5.2.

Renewal of water collection, treatment and supply systems

5.3.

Construction, extension and operation of waste water collection and treatment

5.4.

Renewal of waste water collection and treatment

5.5.

Collection and transport of non-hazardous waste in source segregated fractions

5.6.

Anaerobic digestion of sewage sludge

5.7.

Anaerobic digestion of bio-waste

5.8.

Composting of bio-waste

5.9.

Material recovery from non-hazardous waste

5.10.

Landfill gas capture and utilisation

5.11.

Transport of CO2

5.12.

Underground permanent geological storage of CO2

6.

Transport

6.1.

Passenger interurban rail transport

6.2.

Freight rail transport

6.3.

Urban and suburban transport, road passenger transport

6.4.

Operation of personal mobility devices, cycle logistics

6.5.

Transport by motorbikes, passenger cars and light commercial vehicles

6.6.

Freight transport services by road

6.7.

Inland passenger water transport

6.8.

Inland freight water transport

6.9.

Retrofitting of inland water passenger and freight transport

6.10.

Sea and coastal freight water transport, vessels for port operations and auxiliary activities

6.11.

Sea and coastal passenger water transport

6.12.

Retrofitting of sea and coastal freight and passenger water transport

6.13.

Infrastructure for personal mobility, cycle logistics

6.14.

Infrastructure for rail transport

6.15.

Infrastructure enabling low-carbon road transport and public transport

6.16.

Infrastructure enabling low carbon water transport

6.17.

Low carbon airport infrastructure

7.

Construction and real estate activities

7.1.

Construction of new buildings

7.2.

Renovation of existing buildings

7.3.

Installation, maintenance and repair of energy efficiency equipment

7.4.

Installation, maintenance and repair of charging stations for electric vehicles in buildings (and parking spaces attached to buildings)

7.5.

Installation, maintenance and repair of instruments and devices for measuring, regulation and controlling energy performance of buildings

7.6.

Installation, maintenance and repair of renewable energy technologies

7.7.

Acquisition and ownership of buildings

8.

Information and communication

8.1.

Data processing, hosting and related activities

8.2.

Data-driven solutions for GHG emissions reductions

9.

Professional, scientific and technical activities

9.1.

Close to market research, development and innovation

9.2.

Research, development and innovation for direct air capture of CO2

9.3.

Professional services related to energy performance of buildings

Appendix A

Generic criteria for DNSH to climate change adaptation

Appendix B

Generic criteria for DNSH to sustainable use and protection of water and marine resources

Appendix C

Generic criteria for DNSH to pollution prevention and control regarding use and presence of chemicals

Appendix D

Generic criteria for DNSH to protection and restoration of biodiversity and ecosystems

Appendix E

Technical specifications for water appliances

1.   FORESTRY

1.1.    Afforestation

Description of the activity

Establishment of forest through planting, deliberate seeding or natural regeneration on land that, until then, was under a different land use or not used. Afforestation implies a transformation of land use from non-forest to forest, in accordance with the Food and Agriculture Organisation of the United Nations (‘FAO’) definition of afforestation ( 1 ), where forest means a land matching the forest definition as set out in national law, or where not available, is in accordance with the FAO definition of forest ( 2 ). Afforestation may cover past afforestation as long as it takes place in the period between the planting of the trees and the time when the land use is recognised as a forest.

The economic activities in this category could be associated with NACE code A2 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006. The economic activities in this category are limited to NACE II 02.10, i.e. silviculture and other forestry activities, 02.20, i.e. logging, 02.30, i.e. gathering of wild growing non-wood products and 02.40, i.e. support services to forestry.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Afforestation plan and subsequent forest management plan or equivalent instrument

1.1.  The area on which the activity takes place is covered by an afforestation plan of a duration of at least five years, or the minimum period prescribed in national law, developed prior to the start of the activity and continuously updated, until this area matches the definition of forest as set out in national law or where not available, is in line with the FAO definition of forest.

The afforestation plan contains all elements required by the national law relating to environmental impact assessment of afforestation.

1.2.  Preferably through the afforestation plan, or if information is missing, through any other document, detailed information is provided on the following points:

(a)  description of the area according to its gazetting in the land registry;

(b)  site preparation and its impacts on pre-existing carbon stocks, including soils and above-ground biomass, in order to protect land with high carbon stock (1);

(c)  management goals, including major constraints;

(d)  general strategies and activities planned to reach the management goals, including expected operations over the whole forest cycle;

(e)  definition of the forest habitat context, including main existing and intended forest tree species, and their extent and distribution;

(f)  compartments, roads, rights of way and other public access, physical features including waterways, areas under legal and other restrictions;

(g)  measures deployed to establish and maintain the good condition of forest ecosystems;

(h)  consideration of societal issues (including preservation of landscape, consultation of stakeholders in accordance with the terms and conditions laid down in national law);

(i)  assessment of forest related risks, including forest fires, and pests and diseases outbreaks, with the aim of preventing, reducing and controlling the risks and measures deployed to ensure protection and adaptation against residual risks;

(j)  assessment of impact on food security;

(k)  all DNSH criteria relevant to afforestation.

1.3.  When the area becomes a forest, the afforestation plan is followed by a subsequent forest management plan or an equivalent instrument, as set out in national law or, where national law does not define a forest management plan or equivalent instrument, as referred to in the FAO definition of ‘forest area with long-term forest management plan’ (2). The forest management plan or the equivalent instrument covers a period of 10 years or more and is continuously updated.

1.4.  Information is provided on the following points that are not already documented in the forest management plan or equivalent system:

(a)  management goals, including major constraints (3);

(b)  general strategies and activities planned to reach the management goals, including expected operations over the whole forest cycle;

(c)  definition of the forest habitat context, including main existing and intended forest tree species, and their extent and distribution;

(d)  definition of the area according to its gazetting in the land registry;

(e)  compartments, roads, rights of way and other public access, physical features including waterways, areas under legal and other restrictions;

(f)  measures deployed to maintain the good condition of forest ecosystems;

(g)  consideration of societal issues (including preservation of landscape, consultation of stakeholders in accordance with the terms and conditions laid down in national law);

(h)  assessment of forest related risks, including forest fires, and pests and diseases outbreaks, with the aim of preventing, reducing and controlling the risks and measures deployed to ensure protection and adaptation against residual risks;

(i)  all DNSH criteria relevant to forest management.

1.5.  The activity follows the best afforestation practices laid down in national law, or, where no such best afforestation practices have been laid down in national law, the activity complies with one of the following criteria:

(a)  the activity complies with Commission Delegated Regulation (EU) No 807/2014 (4);

(b)  the activity follows the “Pan-European Guidelines for Afforestation and Reforestation with a special focus on the provisions of the UNFCCC” (5).

1.6.  The activity does not involve the degradation of land with high carbon stock (6).

1.7.  The management system associated with the activity in place complies with the due diligence obligation and legality requirements laid down in Regulation (EU) No 995/2010 of the European Parliament and of the Council (7).

1.8.  The afforestation plan and the subsequent forest management plan or equivalent instrument provide for monitoring that ensures the correctness of the information contained in the plan, in particular as regards the data relating to the involved area.

2.  Climate benefit analysis

2.1.  For areas that comply with the requirements at forest sourcing area level to ensure that carbon stocks and sinks levels in the forest are maintained or strengthened over the long term in accordance with Article 29(7), point (b), of Directive (EU) 2018/2001 the activity complies with the following criteria:

(a)  the climate benefit analysis demonstrates that the net balance of GHG emissions and removals generated by the activity over a period of 30 years after the beginning of the activity is lower than a baseline, corresponding to the balance of GHG emissions and removals over a period of 30 years starting at the beginning of the activity, associated to the business-as-usual practices that would have occurred on the involved area in the absence of the activity;

(b)  long-term climate benefits are considered demonstrated by proof of alignment with Article 29(7), point (b), of Directive (EU) 2018/2001.

2.2.  For areas that do not comply with the requirements at forest sourcing area level to ensure that carbon stocks and sinks levels in the forest are maintained or strengthened over the long term in accordance with Article 29(7), point (b), of Directive (EU) 2018/2001 the activity complies with the following criteria:

(a)  the climate benefit analysis demonstrates that the net balance of GHG emissions and removals generated by the activity over a period of 30 years after the beginning of the activity is lower than a baseline, corresponding to the balance of GHG emissions and removals over a period of 30 years starting at the beginning of the activity, associated to the business-as-usual practices that would have occurred on the involved area in the absence of the activity.

(b)  the projected long-term average net GHG balance of the activity is lower than the long-term average GHG balance projected for the baseline, referred to in point 2.2, where long term corresponds to the longer duration between 100 years and the duration of an entire forest cycle.

2.3.  The calculation of climate benefit complies with all of the following criteria:

(a)  the analysis is consistent with the 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (8). The climate benefit analysis is based on transparent, accurate, consistent, complete and comparable information, covers all carbon pools impacted by the activity, including above-ground biomass, below-ground biomass, deadwood, litter and soil, relies on the most conservative assumptions for calculations and includes appropriate considerations about the risks of non-permanence and reversals of carbon sequestration, the risk of saturation and the risk of leakage.

(b)  the business as-usual practices, including harvesting practices, are ones of the following:

(i)  the management practices as documented in the latest version of the forest management plan or equivalent instrument before the start of the activity, if any;

(ii)  the most recent business-as-usual practices prior to the start of the activity;

(iii)  the practices corresponding to a management system ensuring that carbon stocks and sinks levels in the forest area are maintained or strengthened over the long term as set out in Article 29(7), point (b), of Directive (EU) 2018/2001.

(c)  the resolution of the analysis is proportionate to the size of the area concerned and values specific to the area concerned are used.

(d)  emissions and removals that occur due to natural disturbances, such as pests and diseases infestations, forest fires, wind, storm damages, that impact the area and cause underperformance do not result in non-compliance with Regulation (EU) 2020/852, provided that the climate benefit analysis is consistent with the 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories regarding emissions and removals due to natural disturbances.

2.4.  Forest holdings under 13ha are not required to perform a climate benefit analysis.

3.  Guarantee of permanence

3.1.  In accordance with national law, the forest status of the area in which the activity takes place is guaranteed by one of the following measures:

(a)  the area is classified in the permanent forest estate as defined by the FAO (9);

(b)  the area is classified as a protected area;

(c)  the area is the subject of any legal or contractual guarantee ensuring that it will remain a forest.

3.2.  In accordance with national law, the operator of the activity commits that future updates to the afforestation plan and the subsequent forest management plan or equivalent instrument, beyond the activity that is financed, will continue to seek the climate benefits as determined in point 2. Besides, the operator of the activity commits to compensate any reduction in the climate benefit determined in point 2 with an equivalent climate benefit resulting from the conduct of an activity that corresponds to one of the forestry activities defined in this Regulation.

4.  Audit

Within two years after the beginning of the activity and every 10 years thereafter, the compliance of the activity with the substantial contribution to climate change mitigation criteria and the DNSH criteria are verified by either of the following:

(a)  the relevant national competent authorities;

(b)  an independent third-party certifier, at the request of national authorities or the operator of the activity.

In order to reduce costs, audits may be performed together with any forest certification, climate certification or other audit.

The independent third-party certifier may not have any conflict of interest with the owner or the funder, and may not be involved in the development or operation of the activity.

5.  Group assessment

The compliance with the criteria for substantial contribution to climate change mitigation and with DNSH criteria may be checked:

(a)  at the level of the forest sourcing area (10) as defined in Article 2, point (30), of Directive (EU) 2018/2001;

(b)  at the level of a group of holdings sufficiently homogeneous to evaluate the risk of the sustainability of the forest activity, provided that all those holdings have a durable relationship between them and participate in the activity and the group of those holdings remains the same for all subsequent audits.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

Detailed information referred to in point 1.2. (k) includes provisions to comply with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The use of pesticides is reduced and alternative approaches or techniques, which may include non-chemical alternatives to pesticides, are favoured, in accordance with Directive 2009/128/EC of the European Parliament and of the Council (11), with exception of occasions where the use of pesticides is needed to control outbreaks of pests and of diseases.

The activity minimises the use of fertilisers and does not use manure. The activity complies with Regulation (EU) 2019/1009 of the European Parliament and of the Council (12) or national rules on fertilisers or soil improvers for agricultural use.

Well documented and verifiable measures are taken to avoid the use of active ingredients that are listed in Annex I, part A, of Regulation (EU) 2019/1021 (13) of the European Parliament and of the Council (14), the Rotterdam Convention on the prior informed consent procedure for certain hazardous chemicals and pesticides in international trade (15), the Minamata Convention on Mercury (16), the Montreal Protocol on Substances that Deplete the Ozone Layer (17), and of active ingredients that are listed as classification Ia (‘extremely hazardous’) or Ib (‘highly hazardous’) in the WHO Recommended Classification of Pesticides by Hazard (18). The activity complies with the relevant national law on active ingredients.

Pollution of water and soil is prevented and cleaning up measures are undertaken when pollution occurs.

(6)  Protection and restoration of biodiversity and ecosystems

In areas designated by the national competent authority for conservation or in habitats that are protected, the activity is in accordance with the conservation objectives for those areas.

There is no conversion of habitats specifically sensitive to biodiversity loss or with high conservation value, or of areas set aside for the restoration of such habitats in accordance with national law.

Detailed information referred to in points 1.2(k) (Afforestation plan) and 1.4(i) (Forest management plan or equivalent system) include provisions for maintaining and possibly enhancing biodiversity in accordance with national and local provisions, including the following:

(a)  ensuring the good conservation status of habitat and species, maintenance of typical habitat species;

(b)  excluding the use or release of invasive alien species;

(c)  excluding the use of non-native species unless it can be demonstrated that:

(i)  the use of the forest reproductive material leads to favourable and appropriate ecosystem conditions (such as climate, soil criteria and vegetation zone, forest fire resilience);

(ii)  the native species currently present on the site are not anymore adapted to projected climatic and pedo-hydrological conditions.

(d)  ensuring the maintenance and improvement of physical, chemical and biological quality of the soil;

(e)  promoting biodiversity-friendly practices that enhance forests’ natural processes;

(f)  excluding the conversion of high-biodiverse ecosystems into less biodiverse ones;

(g)  ensuring the diversity of associated habitats and species linked to the forest;

(h)  ensuring the diversity of stand structures and maintenance or enhancing of mature stage stands and dead wood.

(1)   

Land with high-carbon stock means wetlands, including peatland, and continuously forested areas within the meaning of Article 29(4)(a), (b) and (c) of Directive (EU) 2018/2001.

(2)   

Forest area that has a long-term (ten years or more) documented management plan, aiming at defined management goals, and which is periodically revised,


FAO Global Resources Assessment 2020. Terms and definitions (version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(3)   

Including an analysis of (i) long term sustainability of the wood resource (ii) impacts/pressures on habitat conservation, diversity of associated habitats and condition of harvesting minimising soil impacts.

(4)   

Commission Delegated Regulation (EU) No 807/2014 of 11 March 2014 supplementing Regulation (EU) No 1305/2013 of the European Parliament and of the Council on support for rural development by the European Agricultural Fund for Rural Development (EAFRD) and introducing transitional provisions (OJ L 227, 31.7.2014, p. 1).

(5)   

Forest Europe Pan-European Guidelines for Afforestation and Reforestation with a special focus on the provisions of the UNFCCC adopted by the MCPFE Expert Level Meeting on 12-13 November, 2008 and by the PEBLDS Bureau on behalf of the PEBLDS Council on 4 November, 2008 (version of 4.6.2021: https://www.foresteurope.org/docs/other_meetings/2008/Geneva/Guidelines_Aff_Ref_ADOPTED.pdf).

(6)   

Land with high-carbon stock means wetlands, including peatland, and continuously forested areas within the meaning of Article 29(4)(a), (b) and (c) of Directive (EU) 2018/2001.

(7)   

Regulation (EU) No 995/2010 of the European Parliament and of the Council of 20 October 2010 laying down the obligations of operators who place timber and timber products on the market (OJ L 295, 12.11.2010, p. 23).

(8)   

2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (version of 4.6.2021: https://www.ipcc-nggip.iges.or.jp/public/2019rf/).

(9)   

Forest area that is designated to be retained as forest and may not be converted to other land use,


FAO Global Resources Assessment 2020. Terms and definitions (version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(10)   

‘Sourcing area’ means the geographically defined area from which the forest biomass feedstock is sourced, from which reliable and independent information is available and where conditions are sufficiently homogeneous to evaluate the risk of the sustainability and legality characteristics of the forest biomass.

(11)   

Directive 2009/128/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for Community action to achieve the sustainable use of pesticides (OJ L 309, 24.11.2009, p. 71).

(12)   

Regulation (EU) 2019/1009 of the European Parliament and of the Council of 5 June 2019 laying down rules on the making available on the market of EU fertilising products and amending Regulations (EC) No 1069/2009 and (EC) No 1107/2009 and repealing Regulation (EC) No 2003/2003 (OJ L 170, 25.6.2019, p. 1).

(13)   

Which implements in the Union the Stockholm Convention on persistent organic pollutants (OJ L 209, 31.7.2006, p. 3.).

(14)   

Regulation (EU) 2019/1021 of the European Parliament and of the Council of 20 June 2019 on persistent organic pollutants (OJ L 169, 25.6.2019, p. 45).

(15)   

Rotterdam Convention on the Prior Informed Consent Procedure for Certain Hazardous Chemicals and Pesticides in International Trade (OJ L 63, 6.3.2003, p. 29).

(16)   

Minamata Convention on Mercury (OJ L 142, 2.6.2017, p. 6.).

(17)   

Montreal Protocol on Substances that Deplete the Ozone Layer (OJ L 297, 31.10.1988, p. 21).

(18)   

The WHO Recommended Classification of Pesticides by Hazard (version 2019), (version of 4.6.2021: https://apps.who.int/iris/bitstream/handle/10665/332193/9789240005662-eng.pdf?ua=1).

1.2.    Rehabilitation and restoration of forests, including reforestation and natural forest regeneration after an extreme event

Description of the activity

Rehabilitation and restoration of forests as defined by national law. Where national law does not contain such a definition, rehabilitation and restoration corresponds to a definition with broad agreement in the peer-reviewed scientific literature for specific countries or a definition in line with the FAO concept of forest restoration ( 3 ) or a definition in line with one of the definitions of ecological restoration ( 4 ) applied to forest, or forest rehabilitation ( 5 ) under the Convention on Biological Diversity ( 6 ). The economic activities in this category also include forest activities in line with the FAO definition of ‘reforestation’  ( 7 ) and ‘naturally regenerating forest’  ( 8 ) after an extreme event, where extreme event is defined by national law, and where national law does not contain such a definition, is in line with the IPCC definition of extreme weather event ( 9 ); or after a wildfire, where wildfire is defined by national law, and where national law does not contain such a definition, as defined in the European Glossary for wildfires and forest fires ( 10 ).

The economic activities in this category imply no change of land use and occurs on degraded land matching the forest definition as set out in national law, or where not available, in accordance with the FAO definition of forest ( 11 ).

The economic activities in this category could be associated with NACE code A2 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006. The economic activities in this category are limited to NACE II 02.10, i.e. silviculture and other forestry activities, 02.20, i.e. logging, 02.30, i.e. gathering of wild growing non-wood products and 02.40, i.e. support services to forestry.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Forest management plan or equivalent instrument

1.1.  The activity takes place on area that is subject to a forest management plan or an equivalent instrument, as set out in national law or, where national law does not define a forest management plan or equivalent instrument, as referred to in the FAO definition of ‘forest area with long-term forest management plan’ (1).

The forest management plan or the equivalent instrument covers a period of 10 years or more, and is continuously updated.

1.2.  Information is provided on the following points that are not already documented in the forest management plan or equivalent system:

(a)  management goals, including major constraints (2);

(b)  general strategies and activities planned to reach the management goals, including expected operations over the whole forest cycle;

(c)  definition of the forest habitat context, including main existing and intended forest tree species, and their extent and distribution;

(d)  definition of the area according to its gazetting in the land registry;

(e)  compartments, roads, rights of way and other public access, physical features including waterways, areas under legal and other restrictions;

(f)  measures deployed to maintain the good condition of forest ecosystems;

(g)  consideration of societal issues (including preservation of landscape, consultation of stakeholders in accordance with the terms and conditions laid down in national law);

(h)  assessment of forest related risks, including forest fires, and pests and diseases outbreaks, with the aim of preventing, reducing and controlling the risks and measures deployed to ensure protection and adaptation against residual risks;

(i)  all DNSH criteria relevant to forest management.

1.3.  The sustainability of the forest management systems, as documented in the plan referred to in point 1.1, is ensured by choosing the most ambitious of the following approaches:

(a)  the forest management matches the applicable national definition of sustainable forest management;

(b)  the forest management matches the Forest Europe definition (3) of sustainable forest management, and complies with the Pan-European Operational Level Guidelines for Sustainable Forest Management (4);

(c)  the management system in place complies with the forest sustainability criteria laid down in Article 29(6) of Directive (EU) 2018/2001, and as of the date of its application with the implementing act on operational guidance for energy from forest biomass adopted under Article 29(8) of that Directive.

1.4.  The activity does not involve the degradation of land with high carbon stock (5).

1.5.  The management system associated with the activity in place complies with the due diligence obligation and legality requirements laid down in Regulation (EU) No 995/2010.

1.6.  The forest management plan or equivalent instrument provides for monitoring which ensures the correctness of the information contained in the plan, in particular as regards the data relating to the involved area.

2.  Climate benefit analysis

2.1.  For areas that comply with the requirements at forest sourcing area level to ensure that carbon stocks and sinks levels in the forest are maintained or strengthened over the long term in accordance with Article 29(7), point (b), of Directive (EU) 2018/2001 the activity complies with the following criteria:

(a)  the climate benefit analysis demonstrates that the net balance of GHG emissions and removals generated by the activity over a period of 30 years after the beginning of the activity is lower than a baseline, corresponding to the balance of GHG emissions and removals over a period of 30 years starting at the beginning of the activity, associated to the business-as-usual practices that would have occurred on the involved area in the absence of the activity;

(b)  long-term climate benefits are considered demonstrated by proof of alignment with Article 29(7), point (b), of Directive (EU) 2018/2001.

2.2.  For areas that do not comply with the requirements at forest sourcing area level to ensure that carbon stocks and sinks levels in the forest are maintained or strengthened over the long term in accordance with Article 29(7), point (b), of Directive (EU) 2018/2001 the activity complies with the following criteria:

(a)  the climate benefit analysis demonstrates that the net balance of GHG emissions and removals generated by the activity over a period of 30 years after the beginning of the activity is lower than a baseline, corresponding to the balance of GHG emissions and removals over a period of 30 years starting at the beginning of the activity, associated to the business-as-usual practices that would have occurred on the involved area in the absence of the activity.

(b)  the projected long-term average net GHG balance of the activity is lower than the long-term average GHG balance projected for the baseline, referred to in point 2.2, where long term corresponds to the longer duration between 100 years and the duration of an entire forest cycle.

2.3.  The calculation of climate benefit complies with all of the following criteria:

(a)  the analysis is consistent with the 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (6). The climate benefit analysis is based on transparent, accurate, consistent, complete and comparable information, covers all carbon pools impacted by the activity, including above-ground biomass, below-ground biomass, deadwood, litter and soil, relies on the most conservative assumptions for calculations and includes appropriate considerations about the risks of non-permanence and reversals of carbon sequestration, the risk of saturation and the risk of leakage.

(b)  the business-as-usual practices, including harvesting practices, are one of the following:

(i)  the management practices as documented in the latest version of the forest management plan or equivalent instrument before the start of the activity, if any;

(ii)  the most recent business-as-usual practices prior to the start of the activity;

(iii)  the practices corresponding to a management system ensuring that carbon stocks and sinks levels in the forest area are maintained or strengthened over the long term as set out in Article 29(7), point (b), of Directive (EU) 2018/2001.

(c)  the resolution of the analysis is proportionate to the size of the area concerned and values specific to the area concerned are used.

(d)  emissions and removals that occur due to natural disturbances, such as pests and diseases infestations, forest fires, wind, storm damages, that impact the area and cause underperformance do not result in non-compliance with Regulation (EU) 2020/852, provided that the climate benefit analysis is consistent with the 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories regarding emissions and removals due to natural disturbances.

2.4.  Forest holdings under 13ha are not required to perform a climate benefit analysis.

3.  Guarantee of permanence

3.1.  In accordance with national law, the forest status of the area in which the activity takes place is guaranteed by one of the following measures:

(a)  the area is classified in the permanent forest estate as defined by the FAO (7);

(b)  the area is classified as a protected area;

(c)  the area is the subject of any legal or contractual guarantee ensuring that it will remain a forest.

3.2.  In accordance with national law, the operator of the activity commits that future updates to the forest management plan or equivalent instrument, beyond the activity that is financed, will continue to seek the climate benefits as determined in point 2. Besides, the operator of the activity commits to compensate any reduction in the climate benefit determined in point 2 with an equivalent climate benefit resulting from the conduct of an activity that corresponds to one of the forestry activities defined in this Regulation.

4.  Audit

Within two years after the beginning of the activity and every 10 years thereafter, the compliance of the activity with the substantial contribution to climate change mitigation criteria and the DNSH criteria are verified by either of the following:

(a)  the relevant national competent authorities;

(b)  an independent third-party certifier, at the request of national authorities or the operator of the activity.

In order to reduce costs, audits may be performed together with any forest certification, climate certification or other audit.

The independent third-party certifier may not have any conflict of interest with the owner or the funder, and may not be involved in the development or operation of the activity.

5.  Group assessment

The compliance with the criteria for substantial contribution to climate change mitigation and with DNSH criteria may be checked:

(a)  at the level of the forest sourcing area (8) as defined in Article 2, point (30), of Directive (EU) 2018/2001;

(b)  at the level of a group of holdings sufficiently homogeneous to evaluate the risk of the sustainability of the forest activity, provided that all those holdings have a durable relationship between them and participate in the activity and the group of those holdings remains the same for all subsequent audits.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

Detailed information referred to in point 1.2. (i) includes provisions to comply with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The silvicultural change induced by the activity on the area covered by the activity is not likely to result in a significant reduction of sustainable supply of primary forest biomass suitable for the manufacturing of wood-based products with long-term circularity potential. This criterion may be demonstrated through the climate benefits analysis referred to in point (2).

(5)  Pollution prevention and control

The use of pesticides is reduced and alternative approaches or techniques, which may include non-chemical alternatives to pesticides, are favoured, in accordance with Directive 2009/128/EC, with exception of occasions where the use of pesticides is needed to control outbreaks of pests and of diseases.

The activity minimises the use of fertilisers and does not use manure. The activity complies with Regulation (EU) 2019/1009 or national rules on fertilisers or soil improvers for agricultural use.

Well documented and verifiable measures are taken to avoid the use of active ingredients that are listed in the Annex I, part A, of Regulation (EU) 2019/1021 (9), the Rotterdam Convention on the prior informed consent procedure for certain hazardous chemicals and pesticides in international trade, the Minamata Convention on Mercury, the Montreal Protocol on Substances that Deplete the Ozone Layer, and of active ingredients that are listed as classification Ia (‘extremely hazardous’) or Ib (‘highly hazardous’) in the WHO Recommended Classification of Pesticides by Hazard. The activity complies with the relevant national law on active ingredients.

Pollution of water and soil is prevented and cleaning up measures are undertaken when pollution occurs.

(6)  Protection and restoration of biodiversity and ecosystems

In areas designated by the national competent authority for conservation or in habitats that are protected, the activity is in accordance with the conservation objectives for those areas.

There is no conversion of habitats specifically sensitive to biodiversity loss or with high conservation value, or of areas set aside for the restoration of such habitats in accordance with national law.

Detailed information referred to in point 1.2.(i) includes provisions for maintaining and possibly enhancing biodiversity in accordance with national and local provisions, including the following:

(a)  ensuring the good conservation status of habitat and species, maintenance of typical habitat species;

(b)  excluding the use or release of invasive alien species;

(c)  excluding the use of non-native species unless it can be demonstrated that:

(i)  the use of the forest reproductive material leads to favourable and appropriate ecosystem conditions (such as climate, soil criteria and vegetation zone, forest fire resilience);

(ii)  the native species currently present on the site are not anymore adapted to projected climatic and pedo-hydrological conditions.

(d)  ensuring the maintenance and improvement of physical, chemical and biological quality of the soil;

(e)  promoting biodiversity-friendly practices that enhance forests’ natural processes;

(f)  excluding the conversion of high-biodiverse ecosystems into less biodiverse ones;

(g)  ensuring the diversity of associated habitats and species linked to the forest;

(h)  ensuring the diversity of stand structures and maintenance or enhancing of mature stage stands and dead wood.

(1)   

Forest area that has a long-term (ten years or more) documented management plan, aiming at defined management goals, and which is periodically revised.


FAO Global Resources Assessment 2020. Terms and definitions (version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(2)   

Including an analysis of (i) long term sustainability of the wood resource (ii) impacts/pressures on habitat conservation, diversity of associated habitats and condition of harvesting minimizing soil impacts.

(3)   

The stewardship and use of forests and forest lands in a way, and at a rate, that maintains their biodiversity, productivity, regeneration capacity, vitality and their potential to fulfil, now and in the future, relevant ecological, economic and social functions, at local, national, and global levels, and that does not cause damage to other ecosystems.


Resolution H1 General Guidelines for the Sustainable Management of Forests in Europe Second Ministerial Conference on the Protection of Forests in Europe (Forest Europe), 16-17 June 1993, Helsinki/Finland (version of 4.6.2021: https://www.foresteurope.org/docs/MC/MC_helsinki_resolutionH1.pdf ).

(4)   

Annex 2 of the Resolution L2. Pan-European Operational Level Guidelines for Sustainable Forest Management. Third Ministerial Conference on the Protection of Forests in Europe 2-4 June 1998, Lisbon/Portugal (version of 4.6.2021: https://foresteurope.org/wp-content/uploads/2016/10/MC_lisbon_resolutionL2_with_annexes.pdf#page=18).

(5)   

Land with high-carbon stock means wetlands, including peatland, and continuously forested areas within the meaning of Article 29(4)(a), (b) and (c) of Directive (EU) 2018/2001.

(6)   

2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (version of 4.6.2021: https://www.ipcc-nggip.iges.or.jp/public/2019rf/).

(7)   

Forest area that is designated to be retained as forest and may not be converted to other land use,


(FAO Global Resources Assessment 2020. Terms and definitions version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(8)   

‘Sourcing area’ means the geographically defined area from which the forest biomass feedstock is sourced, from which reliable and independent information is available and where conditions are sufficiently homogeneous to evaluate the risk of the sustainability and legality characteristics of the forest biomass.

(9)   

Which implements in the Union the Stockholm Convention on persistent organic pollutants (OJ L 209, 31.7.2006, p. 3).

1.3.    Forest management

Description of the activity

Forest management as defined by national law. Where national law does not contain such a definition, forest management corresponds to any economic activity resulting from a system applicable to a forest that influences the ecological, economic or social functions of the forest. Forest management assumes no change in land use and occurs on land matching the definition of forest as set out in national law, or where not available, in accordance with the FAO definition of forest ( 12 ).

The economic activities in this category could be associated with NACE code A2 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006. The economic activities in this category are limited to NACE II 02.10, i.e. silviculture and other forestry activities, 02.20, i.e. logging, 02.30, i.e. gathering of wild growing non-wood products and 02.40, i.e. support services to forestry.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Forest management plan or equivalent instrument

1.1.  The activity takes place on area that is subject to a forest management plan or an equivalent instrument, as set out in national law or, where national law does not define a forest management plan or equivalent instrument, as referred to in the FAO definition of ‘forest area with long-term forest management plan’ (1).

The forest management plan or equivalent instrument covers a period of 10 years or more and is continuously updated.

1.2.  Information is provided on the following points that are not already documented in the forest management plan or equivalent system:

(a)  management goals, including major constraints (2);

(b)  general strategies and activities planned to reach the management goals, including expected operations over the whole forest cycle;

(c)  definition of the forest habitat context, including main existing and intended forest tree species, and their extent and distribution;

(d)  definition of the area according to its gazetting in the land registry;

(e)  compartments, roads, rights of way and other public access, physical features including waterways, areas under legal and other restrictions;

(f)  measures deployed to maintain the good condition of forest ecosystems;

(g)  consideration of societal issues (including preservation of landscape, consultation of stakeholders in accordance with the terms and conditions laid down in national law);

(h)  assessment of forest related risks, including forest fires, and pests and diseases outbreaks, with the aim of preventing, reducing and controlling the risks and measures deployed to ensure protection and adaptation against residual risks;

(i)  all DNSH criteria relevant for forest management.

1.3.  The sustainability of the forest management systems, as documented in the plan referred to in point 1.1, is ensured by choosing the most ambitious of the following approaches:

(a)  the forest management matches the applicable national definition of sustainable forest management;

(b)  the forest management matches the Forest Europe definition (3) of sustainable forest management, and complies with the Pan-European Operational Level Guidelines for Sustainable Forest Management (4);

(c)  the management system in place shows compliance with the forest sustainability criteria set out in Article 29(6) of Directive (EU) 2018/2001, and as of the date of its application with the implementing act on operational guidance for energy from forest biomass adopted under Article 29(8) of that Directive.

1.4.  The activity does not involve the degradation of land with high carbon stock (5).

1.5.  The management system associated with the activity in place complies with the due diligence obligation and legality requirements laid down in Regulation (EU) No 995/2010.

1.6.  The forest management plan or equivalent instrument provides for monitoring which ensures the correctness of the information contained in the plan, in particular as regards the data relating to the involved area.

2.  Climate benefit analysis

2.1.  For areas that comply with the requirements at forest sourcing area level to ensure that carbon stocks and sinks levels in the forest are maintained or strengthened over the long term in accordance with Article 29(7), point (b), of Directive (EU) 2018/2001 the activity complies with the following criteria:

(a)  the climate benefit analysis demonstrates that the net balance of GHG emissions and removals generated by the activity over a period of 30 years after the beginning of the activity is lower than a baseline, corresponding to the balance of GHG emissions and removals over a period of 30 years starting at the beginning of the activity, associated to the business-as-usual practices that would have occurred on the involved area in the absence of the activity;

(b)  long-term climate benefits are considered demonstrated by proof of alignment with Article 29(7), point (b), of Directive (EU) 2018/2001.

2.2.  For areas that do not comply with the requirements at forest sourcing area level to ensure that carbon stocks and sinks levels in the forest are maintained or strengthened over the long term in accordance with Article 29(7), point (b), of Directive (EU) 2018/2001 the activity complies with the following criteria:

(a)  the climate benefit analysis demonstrates that the net balance of GHG emissions and removals generated by the activity over a period of 30 years after the beginning of the activity is lower than a baseline, corresponding to the balance of GHG emissions and removals over a period of 30 years starting at the beginning of the activity, associated to the business-as-usual practices that would have occurred on the involved area in the absence of the activity.

(b)  the projected long-term average net GHG balance of the activity is lower than the long-term average GHG balance projected for the baseline, referred to in point 2.2, where long term corresponds to the longer duration between 100 years and the duration of an entire forest cycle.

2.3.  The calculation of climate benefit complies with all of the following criteria:

(a)  the analysis is consistent with the 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (6). The climate benefit analysis is based on transparent, accurate, consistent, complete and comparable information, covers all carbon pools impacted by the activity, including above-ground biomass, below-ground biomass, deadwood, litter and soil, relies on the most conservative assumptions for calculations and includes appropriate considerations about the risks of non-permanence and reversals of carbon sequestration, the risk of saturation and the risk of leakage.

(b)  the business-as-usual practices, including harvesting practices, are one of the following:

(i)  the management practices as documented in the latest version of the forest management plan or equivalent instrument before the start of the activity, if any;

(ii)  the most recent business-as-usual practices prior to the start of the activity;

(iii)  the practices corresponding to a management system ensuring that carbon stocks and sinks levels in the forest area are maintained or strengthened over the long term as set out in Article 29(7), point (b), of Directive (EU) 2018/2001.

(c)  the resolution of the analysis is proportionate to the size of the area concerned and values specific to the area concerned are used.

(d)  emissions and removals that occur due to natural disturbances, such as pests and diseases infestations, forest fires, wind, storm damages, that impact the area and cause underperformance do not result in non-compliance with Regulation (EU) 2020/852, provided that the climate benefit analysis is consistent with the 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories regarding emissions and removals due to natural disturbances.

2.4.  Forest holdings under 13ha are not required to perform a climate benefit analysis.

3.  Guarantee of permanence

3.1.  In accordance with national law, the forest status of the area in which the activity takes place is guaranteed by one of the following measures:

(a)  the area is classified in the permanent forest estate as defined by the FAO (7);

(b)  the area is classified as a protected area;

(c)  the area is the subject of any legal or contractual guarantee ensuring that it will remain a forest.

3.2.  In accordance with national law, the operator of the activity commits that future updates to the forest management plan or equivalent instrument, beyond the activity that is financed, will continue to seek the climate benefits as determined in point 2. Besides, the operator of the activity commits to compensate any reduction in the climate benefit determined in point 2 with an equivalent climate benefit resulting from the conduct of an activity that corresponds to one of the forestry activities defined in this Regulation.

4.  Audit

Within two years after the beginning of the activity and every 10 years thereafter, the compliance of the activity the substantial contribution to climate change mitigation criteria and the DNSH criteria is verified by either of the following:

(a)  the relevant national competent authorities;

(b)  an independent third-party certifier, at the request of national authorities or the operator of the activity.

In order to reduce costs, audits may be performed together with any forest certification, climate certification or other audit.

The independent third-party certifier may not have any conflict of interest with the owner or the funder, and may not be involved in the development or operation of the activity.

5.  Group assessment

The compliance with the criteria for substantial contribution to climate change mitigation and with DNSH criteria may be checked:

(a)  at the level of the forest sourcing area (8) as defined in Article 2, point (30), of Directive (EU) 2018/2001;

(b)  at the level of a group of holdings sufficiently homogeneous to evaluate the risk of the sustainability of the forest activity, provided that all those holdings have a durable relationship between them and participate in the activity and the group of those holdings remains the same for all subsequent audits.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

Detailed information referred to in point 1.2. (i) includes provisions to comply with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The silvicultural change induced by the activity on the area covered by the activity is not likely to result in a significant reduction of sustainable supply of primary forest biomass suitable for the manufacturing of wood-based products with long-term circularity potential. This criterion may be demonstrated through the climate benefits analysis referred to in point (2).

(5)  Pollution prevention and control

The use of pesticides is reduced and alternative approaches or techniques, which may include non-chemical alternatives to pesticides, are favoured, in accordance with Directive 2009/128/EC, with exception of occasions where the use of pesticides is needed to control outbreaks of pests and of diseases.

The activity minimised the use of fertilisers and does not use manure. The activity complies with Regulation (EU) 2019/1009 or national rules on fertilisers or soil improvers for agricultural use.

Well documented and verifiable measures are taken to avoid the use of active ingredients that are listed in Annex I, part A, of Regulation (EU) 2019/1021 of the European Parliament and of the Council (9), the Rotterdam Convention on the prior informed consent procedure for certain hazardous chemicals and pesticides in international trade, the Minamata Convention on Mercury, the Montreal Protocol on Substances that Deplete the Ozone Layer, and of active ingredients that are listed as classification Ia (‘extremely hazardous’) or Ib (‘highly hazardous’) in the WHO Recommended Classification of Pesticides by Hazard (10). The activity complies with the relevant national law on active ingredients.

Pollution of water and soil is prevented and cleaning up measures are undertaken when pollution occurs.

(6)  Protection and restoration of biodiversity and ecosystems

In areas designated by the national competent authority for conservation or in habitats that are protected, the activity is in accordance with the conservation objectives for those areas.

There is no conversion of habitats specifically sensitive to biodiversity loss or with high conservation value, or of areas set aside for the restoration of such habitats in accordance with national law.

Detailed information referred to in point 1.2.(i) includes provisions for maintaining and possibly enhancing biodiversity in accordance with national and local provisions, including the following:

(a)  ensuring the good conservation status of habitat and species, maintenance of typical habitat species;

(b)  excluding the use or release of invasive alien species;

(c)  excluding the use of non-native species unless it can be demonstrated that:

(i)  the use of the forest reproductive material leads to favourable and appropriate ecosystem condition (such as climate, soil criteria, and vegetation zone, forest fire resilience);

(ii)  the native species currently present on the site are not anymore adapted to projected climatic and pedo-hydrological conditions;

(d)  ensuring the maintenance and improvement of physical, chemical and biological quality of the soil;

(e)  promoting biodiversity-friendly practices that enhance forests’ natural processes;

(f)  excluding the conversion of high-biodiverse ecosystems into less biodiverse ones;

(g)  ensuring the diversity of associated habitats and species linked to the forest;

(h)  ensuring the diversity of stand structures and maintenance or enhancing of mature stage stands and dead wood.

(1)   

Forest area that has a long-term (ten years or more) documented management plan, aiming at defined management goals, and which is periodically revised.


FAO Global Resources Assessment 2020. Terms and definitions (version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(2)   

Including an analysis of (i) long term sustainability of the wood resource (ii) impacts/pressures on habitat conservation, diversity of associated habitats and condition of harvesting minimizing soil impacts.

(3)   

The stewardship and use of forests and forest lands in a way, and at a rate, that maintains their biodiversity, productivity, regeneration capacity, vitality and their potential to fulfil, now and in the future, relevant ecological, economic and social functions, at local, national, and global levels, and that does not cause damage to other ecosystems.


Resolution H1 General Guidelines for the Sustainable Management of Forests in Europe Second Ministerial Conference on the Protection of Forests in Europe (Forest Europe), 16-17 June 1993, Helsinki/Finland (version of 4.6.2021: https://www.foresteurope.org/docs/MC/MC_helsinki_resolutionH1.pdf).

(4)   

Annex 2 of the Resolution L2. Pan-European Operational Level Guidelines for Sustainable Forest Management. Third Ministerial Conference on the Protection of Forests in Europe 2-4 June 1998, Lisbon/Portugal (version of 4.6.2021: https://foresteurope.org/wp-content/uploads/2016/10/MC_lisbon_resolutionL2_with_annexes.pdf#page=18).

(5)   

Land with high-carbon stock means wetlands, including peatland, and continuously forested areas within the meaning of Article 29(4)(a), (b) and (c) of Directive (EU) 2018/2001.

(6)   

2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (version of 4.6.2021: https://www.ipcc-nggip.iges.or.jp/public/2019rf/).

(7)   

Forest area that is designated to be retained as forest and may not be converted to other land use.


(FAO Global Resources Assessment 2020. Terms and definitions version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(8)   

‘Sourcing area’ means the geographically defined area from which the forest biomass feedstock is sourced, from which reliable and independent information is available and where conditions are sufficiently homogeneous to evaluate the risk of the sustainability and legality characteristics of the forest biomass.

(9)   

Which implements in the Union the Stockholm Convention on persistent organic pollutants. Regulation (EU) 2019/1021 of the European Parliament and of the Council of 20 June 2019 on persistent organic pollutants (OJ L 209, 31.7.2006, p. 3.).

(10)   

The WHO Recommended Classification of Pesticides by Hazard (version 2019), (version of 4.6.2021: https://apps.who.int/iris/bitstream/handle/10665/332193/9789240005662-eng.pdf?ua=1).

1.4.    Conservation forestry

Description of the activity

Forest management activities with the objective of preserving one or more habitats or species. Conservation forestry assumes no change in land category and occurs on land matching the forest definition as set out in national law, or where not available, in accordance with the FAO definition of forest ( 13 ).

The economic activities in this category could be associated with NACE code A2 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006. The economic activities in this category are limited to NACE II 02.10, i.e. silviculture and other forestry activities, 02.20, i.e. logging, 02.30, i.e. gathering of wild growing non-wood products, and 02.40, i.e. support services to forestry.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Forest management plan or equivalent instrument

1.1.  The activity takes place on area that is subject to a forest management plan or an equivalent instrument, as set out in national law or, where national regulation dos not define a forest management plan, as referred to in the FAO definition of ‘forest area with long-term forest management plan’ (1).

The forest management plan or the equivalent instrument covers a period of 10 years or more and is continuously updated.

1.2.  Information is provided on the following points that are not already documented in the forest management plan or equivalent system:

(a)  management goals, including major constraints;

(b)  general strategies and activities planned to reach the management goals, including expected operations over the whole forest cycle;

(c)  definition of the forest habitat context, main forest tree species and those intended and their extent and distribution, in accordance to the local forest ecosystem context;

(d)  definition of the area according to its gazetting in the land registry;

(e)  compartments, roads, rights of way and other public access, physical features including waterways, areas under legal and other restrictions;

(f)  measures deployed to maintain the good condition of forest ecosystems;

(g)  consideration of societal issues (including preservation of landscape, consultation of stakeholders in accordance with the terms and conditions laid down in national law);

(h)  assessment of forest related risks, including forest fires, and pests and diseases outbreaks, with the aim of preventing, reducing and controlling the risks and measures deployed to ensure protection and adaptation against residual risks;

(i)  all DNSH relevant to forest management.

1.3.  The forest management plan or the equivalent instrument:

(a)  shows a primary designated management objective (2) that consists in protection of soil and water (3), conservation of biodiversity (4) or social services (5) based on the FAO definitions;

(b)  promotes biodiversity-friendly practices that enhance forests’ natural processes;

(c)  includes an analysis of:

(i)  impacts and pressures on habitat conservation and diversity of associated habitats;

(ii)  condition of harvesting minimizing soil impacts;

(iii)  other activities that have an impact on conservation objectives, such as hunting and fishing, agricultural, pastoral and forestry activities, industrial, mining, and commercial activities.

1.4.  The sustainability of the forest management systems as documented in the plan referred to in point 1.1 is ensured by choosing the most ambitious of the following approaches:

(a)  the forest management matches the national definition of sustainable forest management, if any;

(b)  the forest management matches the Forest Europe definition (6) of sustainable forest management and complies with the Pan-European Operational Level Guidelines for Sustainable Forest Management (7);

(c)  the management system in place shows compliance with the forest sustainability criteria as defined in Article 29(6) of Directive (EU) 2018/2001, and as of the date of its application with the implementing act on operational guidance for energy from forest biomass adopted under Article 29(8) of that Directive.

1.5.  The activity does not involve the degradation of land with high carbon stock (8).

1.6.  The management system associated with the activity in place complies with the due diligence obligation and legality requirements laid down in Regulation (EU) No 995/2010.

1.7.  The forest management plan or equivalent instrument provides for monitoring which ensures the correctness of the information contained in the plan, in particular as regards the data relating to the involved area.

2.  Climate benefit analysis

2.1.  For areas that comply with the requirements at forest sourcing area level to ensure that carbon stocks and sinks levels in the forest are maintained or strengthened over the long term in accordance with Article 29(7), point (b), of Directive (EU) 2018/2001 the activity complies with the following criteria:

(a)  the climate benefit analysis demonstrates that the net balance of GHG emissions and removals generated by the activity over a period of 30 years after the beginning of the activity is lower than a baseline, corresponding to the balance of GHG emissions and removals over a period of 30 years starting at the beginning of the activity, associated to the business-as-usual practices that would have occurred on the involved area in the absence of the activity;

(b)  long-term climate benefits are considered demonstrated by proof of alignment with Article 29(7), point (b), of Directive (EU) 2018/2001.

2.2.  For areas that do not comply with the requirements at forest sourcing area level to ensure that carbon stocks and sinks levels in the forest are maintained or strengthened over the long term in accordance with Article 29(7), point (b), of Directive (EU) 2018/2001 the activity complies with the following criteria:

(a)  the climate benefit analysis demonstrates that the net balance of GHG emissions and removals generated by the activity over a period of 30 years after the beginning of the activity is lower than a baseline, corresponding to the balance of GHG emissions and removals over a period of 30 years starting at the beginning of the activity, associated to the business-as-usual practices that would have occurred on the involved area in the absence of the activity.

(b)  the projected long-term average net GHG balance of the activity is lower than the long-term average GHG balance projected for the baseline, referred to in point 2.2, where long term corresponds to the longer duration between 100 years and the duration of an entire forest cycle.

2.3.  The calculation of climate benefit complies with all of the following criteria:

(a)  the analysis is consistent with the 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (9). The climate benefit analysis is based on transparent, accurate, consistent, complete and comparable information, covers all carbon pools impacted by the activity, including above-ground biomass, below-ground biomass, deadwood, litter and soil, relies on the most conservative assumptions for calculations and includes appropriate considerations about the risks of non-permanence and reversals of carbon sequestration, the risk of saturation and the risk of leakage.

(b)  the business as-usual practices, including harvesting practices, are one of the following:

(i)  the management practices as documented in the latest version of the forest management plan or equivalent instrument before the start of the activity, if any;

(ii)  the most recent business-as-usual practices prior to the start of the activity;

(iii)  the practices corresponding to a management system ensuring that carbon stocks and sinks levels in the forest area are maintained or strengthened over the long term as set out in Article 29(7), point (b), of Directive (EU) 2018/2001.

(c)  the resolution of the analysis is proportionate to the size of the area concerned and values specific to the area concerned are used.

(d)  emissions and removals that occur due to natural disturbances, such as pests and diseases infestations, forest fires, wind, storm damages, that impact the area and cause underperformance do not result in non-compliance with the criteria of Regulation (EU) 2020/852, provided that the climate benefit analysis is consistent with the 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories regarding emissions and removals due to natural disturbances.

2.4.  Forest holdings under 13ha are not required to perform a climate benefit analysis.

3.  Guarantee of permanence

3.1.  In accordance with national law, the forest status of the area in which the activity takes place is guaranteed by one of the following measures:

(a)  the area is classified in the permanent forest estate as defined by the FAO (10);

(b)  the area is classified as a protected area;

(c)  the area is the subject of any legal or contractual guarantee ensuring that it will remain a forest.

3.2.  In accordance with national law, the operator of the activity commits that future updates to the forest management plan or equivalent instrument, beyond the activity that is financed, will continue to seek the climate benefits as determined in point 2. Besides, the operator of the activity commits to compensate any reduction in the climate benefit determined in point 2 with an equivalent climate benefit resulting from the conduct of an activity that corresponds to one of the forestry activities defined in this Regulation.

4.  Audit

Within two years after the beginning of the activity and every 10 years thereafter, the compliance of the activity with the substantial contribution to climate change mitigation criteria and the DNSH criteria are verified by either of the following:

(a)  the relevant national competent authorities;

(b)  an independent third-party certifier, at the request of national authorities or the operator of the activity.

In order to reduce costs, audits may be performed together with any forest certification, climate certification or other audit.

The independent third-party certifier may not have any conflict of interest with the owner or the funder, and may not be involved in the development or operation of the activity.

5.  Group assessment

The compliance with the criteria for substantial contribution to climate change mitigation and with DNSH criteria may be checked:

(a)  at the level of the forest sourcing area (11) as defined in Article 2, point (30), of Directive (EU) 2018/2001;

(b)  at the level of a group of forest holdings sufficiently homogeneous to evaluate the risk of the sustainability of the forest activity, provided that all those holdings have a durable relationship between them and participate in the activity and the group of those holdings remains the same for all subsequent audits.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

Detailed information referred to in point 1.2.(i) includes provisions to comply with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The silvicultural change induced by the activity on the area covered by the activity is not likely to result in a significant reduction of sustainable supply of primary forest biomass suitable for the manufacturing of wood-based products with long-term circularity potential. This criterion may be demonstrated through the climate benefits analysis referred to in point (2).

(5)  Pollution prevention and control

The activity does not use pesticides or fertilisers.

Well documented and verifiable measures are taken to avoid the use of active ingredients that are listed in Annex I, part A, of Regulation (EU) 2019/1021 (12), the Rotterdam Convention on the prior informed consent procedure for certain hazardous chemicals and pesticides in international trade, the Minamata Convention on Mercury, the Montreal Protocol on Substances that Deplete the Ozone Layer, and of active ingredients that are listed as classification Ia (‘extremely hazardous’) or Ib (‘highly hazardous’) in the WHO Recommended Classification of Pesticides by Hazard (13). The activity complies with the relevant national law on active ingredients.

Pollution of water and soil is prevented and cleaning up measures are undertaken when pollution occurs.

(6)  Protection and restoration of biodiversity and ecosystems

In areas designated by the national competent authority for conservation or in habitats that are protected, the activity is in accordance with the conservation objectives for those areas.

There is no conversion of habitats specifically sensitive to biodiversity loss or with high conservation value, or of areas set aside for the restoration of such habitats in accordance with national law.

Detailed information referred to in in point 1.2.(i) includes provisions for maintaining and possibly enhancing biodiversity in accordance with national and local provisions, including the following:

(a)  ensuring the good conservation status of habitat and species, maintenance of typical habitat species;

(b)  excluding the use or release of invasive alien species;

(c)  excluding the use of non-native species unless it can be demonstrated that:

(i)  the use of the forest reproductive material leads to favourable and appropriate ecosystem conditions (such as climate, soil criteria, and vegetation zone, forest fire resilience);

(ii)  the native species currently present on the site are not anymore adapted to projected climatic and pedo-hydrological conditions;

(d)  ensuring the maintenance and improvement of physical, chemical and biological quality of the soil;

(e)  promoting biodiversity-friendly practices that enhance forests’ natural processes;

(f)  excluding the conversion of high-biodiverse ecosystems into less biodiverse ones;

(g)  ensuring the diversity of associated habitats and species linked to the forest;

(h)  ensuring the diversity of stand structures and maintenance or enhancing of mature stage stands and dead wood.

(1)   

Forest area that has a long-term (ten years or more) documented management plan, aiming at defined management goals, and which is periodically revised, FAO Global Resources Assessment 2020. Terms and definitions (version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(2)   

The primary designated management objective assigned to a management unit (FAO Global Resources Assessment 2020. Terms and definitions version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(3)   

Forest where the management objective is protection of soil and water. (FAO Global Resources Assessment 2020. Terms and definitions version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(4)   

Forest where the management objective is conservation of biological diversity. Includes but is not limited to areas designated for biodiversity conservation within the protected areas. (FAO Global Resources Assessment 2020. Terms and definitions version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(5)   

Forest where the management objective is social services. (FAO Global Resources Assessment 2020. Terms and definitions version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf)

(6)   

The stewardship and use of forests and forest lands in a way, and at a rate, that maintains their biodiversity, productivity, regeneration capacity, vitality and their potential to fulfil, now and in the future, relevant ecological, economic and social functions, at local, national, and global levels, and that does not cause damage to other ecosystems.


Resolution H1 General Guidelines for the Sustainable Management of Forests in Europe Second Ministerial Conference on the Protection of Forests in Europe (Forest Europe), 16-17 June 1993, Helsinki/Finland (version of 4.6.2021: https://www.foresteurope.org/docs/MC/MC_helsinki_resolutionH1.pdf)

(7)   

Annex 2 of the Resolution L2. Pan-European Operational Level Guidelines for Sustainable Forest Management. Third Ministerial Conference on the Protection of Forests in Europe 2-4 June 1998, Lisbon/Portugal (version of 4.6.2021: https://foresteurope.org/wp-content/uploads/2016/10/MC_lisbon_resolutionL2_with_annexes.pdf#page=18).

(8)   

Land with high-carbon stock means wetlands, including peatland, and continuously forested areas within the meaning of Article 29(4)(a), (b) and (c) of Directive (EU) 2018/2001.

(9)   

2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (version of 4.6.2021: https://www.ipcc-nggip.iges.or.jp/public/2019rf/).

(10)   

Forest area that is designated to be retained as forest and may not be converted to other land use.


(FAO Global Resources Assessment 2020. Terms and definitions version of 4.6.2021: http://www.fao.org/3/I8661EN/i8661en.pdf).

(11)   

‘Sourcing area’ means the geographically defined area from which the forest biomass feedstock is sourced, from which reliable and independent information is available and where conditions are sufficiently homogeneous to evaluate the risk of the sustainability and legality characteristics of the forest biomass.

(12)   

Which implements in the Union the Stockholm Convention on persistent organic pollutants (OJ L 209, 31.7.2006, p. 3.).

(13)   

The WHO Recommended Classification of Pesticides by Hazard (version 2019), (version of 4.6.2021: https://apps.who.int/iris/bitstream/handle/10665/332193/9789240005662-eng.pdf?ua=1).

2.   ENVIRONMENTAL PROTECTION AND RESTORATION ACTIVITIES

2.1.    Restoration of wetlands

Description of the activity

Restoration of wetlands refers to economic activities that promote a return to original conditions of wetlands and economic activities that improve wetland functions without necessarily promoting a return to pre-disturbance conditions, with wetlands meaning land matching the international definition of wetland ( 14 ) or of peatland ( 15 ) as set out in the Convention on Wetlands of International Importance especially as Waterfowl Habitat (Ramsar Convention) ( 16 ). The concerned area matches the Union definition of wetlands, as provided in the Commission Communication on the wise use and conservation of wetlands ( 17 ).

The economic activities in this category have no dedicated NACE code as referred to in the statistical classification of economic activities established by Regulation (EC) No 1893/2006, but relate to class 6 of the statistical classification of environmental protection activities (CEPA) established by Regulation (EU) No 691/2011 of the European Parliament and of the Council ( 18 ).

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Restoration plan

1.1.  The area is covered by a restoration plan, which is consistent with the Ramsar Convention’s principles and guidelines on wetland restoration (1), until the area is classified as a wetland and is covered by a wetland management plan, consistent with the Ramsar Convention’s guidelines for management planning for Ramsar sites and other wetlands (2). For peatlands, the restoration plan follows the recommendations contained in relevant resolutions of the Ramsar Convention, including the resolution XIII/13.

1.2.  The restoration plan contains careful consideration of local hydrological and pedological conditions, including the dynamics of soil saturation and the change of aerobic and anaerobic conditions.

1.3.  All wetland management relevant DNSH criteria are addressed in the restoration plan.

1.4.  The restoration plan provides for monitoring which ensures the correctness of the information contained in the plan, in particular as regards the data relating to the involved area.

2.  Climate benefit analysis

2.1.  The activity complies with the following criteria:

(a)  the climate benefit analysis demonstrates that the net balance of GHG emissions and removals generated by the activity over a period of 30 years after the beginning of the activity is lower than a baseline, corresponding to the balance of GHG emissions and removals over a period of 30 years starting at the beginning of the activity, associated to the business-as-usual practices that would have occurred on the involved area in the absence of the activity;

(b)  the projected long-term average net GHG balance of the activity is lower than the long-term average GHG balance projected for the baseline, referred to in point 2.2, where long term corresponds to 100 years.

2.2.  The calculation of climate benefit complies with all of the following criteria:

(a)  the analysis is consistent with the 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (3). In particular, if the wetland definition used in that analysis differs from the wetland definition used in the national GHG inventory, the analysis includes an identification of the different land categories covered by the involved area. The climate benefit analysis is based on transparent, accurate, consistent, complete and comparable information, covers all carbon pools impacted by the activity, including above-ground biomass, below-ground biomass, deadwood, litter and soil, relies on the most conservative assumptions for calculations and includes appropriate considerations about the risks of non-permanence and reversals of carbon sequestration, the risk of saturation and the risk of leakage. For coastal wetlands, climate benefit analysis considers projections of expected relative sea level rise and the potential that the wetlands will migrate;

(b)  the business-as-usual practices, including harvesting practices, are one of the following:

(i)  the management practices as documented before the start of the activity, if any;

(ii)  the most recent business-as-usual practices prior to the start of the activity.

(c)  the resolution of the analysis is proportionate to the size of the area concerned and values specific to the area concerned are used;

(d)  emissions and removals that occur due to natural disturbances, such as pests and diseases infestations, fires, wind, storm damages, that impact the area and cause underperformance do not result in non-compliance with the criteria of Regulation (EU) 2020/852, provided that the climate benefit analysis is consistent with the 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories regarding emissions and removals due to natural disturbances.

4.  Guarantee of permanence

4.1.  In accordance with national law, the wetland status of the area in which the activity takes place is guaranteed by one of the following measures:

(a)  the area is designated to be retained as wetland and may not be converted to other land use;

(b)  the area is classified as a protected area;

(c)  the area is the subject of any legal or contractual guarantee ensuring that it will remain a wetland.

4.2.  In accordance with the national law, the operator of the activity commits that future updates to the restoration plan, beyond the activity that is financed, will continue to seek the climate benefits as determined in point 2. Besides, the operator of the activity commits to compensate any reduction in the climate benefit determined in point 2 with an equivalent climate benefit resulting from the conduct of an activity that corresponds to one of the environmental protection and restoration activities defined in this Regulation.

5.  Audit

Within two years after the beginning of the activity and every 10 years thereafter, the compliance of the activity with the substantial contribution to climate change mitigation criteria and with the DNSH criteria are verified by either of the following:

(a)  the relevant national competent authorities;

(b)  an independent third-party certifier, at the request of national authorities or the operator of the activity.

In order to reduce costs, audits may be performed together with any forest certification, climate certification or other audit.

The independent third-party certifier may not have any conflict of interest with the owner or the funder, and may not be involved in the development or operation of the activity.

6.  Group assessment

The compliance with the criteria for substantial contribution to climate change mitigation and with DNSH criteria may be checked at the level of a group of holdings sufficiently homogeneous to evaluate the risk of the sustainability of the forest activity, provided that all those holdings have a durable relationship between them and participate in the activity and the group of those holdings remains the same for all subsequent audits.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

Peat extraction is minimised.

(5)  Pollution prevention and control

The use of pesticides is minimised and alternative approaches or techniques, which may include non-chemical alternatives to pesticides are favoured, in accordance with Directive 2009/128/EC, with exception of occasions where the use of pesticides is needed to control outbreaks of pests and diseases.

The activity minimises the use of fertilisers and does not use manure. The activity complies with Regulation (EU) 2019/1009 or national rules on fertilisers or soil improvers for agricultural use.

Well documented and verifiable measures are taken to avoid the use of active ingredients that are listed in Annex I, part A, of Regulation (EU) 2019/1021 (4), the Rotterdam Convention on the prior informed consent procedure for certain hazardous chemicals and pesticides in international trade, the Minamata Convention on Mercury, the Montreal Protocol on Substances that Deplete the Ozone Layer, and of active ingredients that are listed as classification Ia (‘extremely hazardous’) or Ib (‘highly hazardous’) in the WHO recommended Classification of Pesticides by Hazard (5). The activity complies with the relevant national implementing law on active ingredients.

Pollution of water and soil is prevented and cleaning up measures are undertaken when pollution occurs.

(6)  Protection and restoration of biodiversity and ecosystems

In areas designated by the national competent authority for conservation or in habitats that are protected, the activity is in accordance with the conservation objectives for those areas.

There is no conversion of habitats specifically sensitive to biodiversity loss or with high conservation value, or of areas set aside for the restoration of such habitats in accordance with national law.

The plan referred to in point 1 (Restoration plan) of this Section includes provisions for maintaining and possibly enhancing biodiversity in accordance with national and local provisions, including the following:

(a)  ensuring the good conservation status of habitat and species, maintenance of typical habitat species;

(b)  excluding the use or release of invasive species.

(1)   

Ramsar Convention (2002) Principles and guidelines for wetland restoration. Adopted by Resolution VIII.16 (2002) of the Ramsar Convention (version of 4.6.2021: https://www.ramsar.org/sites/default/files/documents/pdf/guide/guide-restoration.pdf).

(2)   

Ramsar Convention (2002) Resolution VIII.14 New Guidelines for management planning for Ramsar sites and other wetlands (version of 4.6.2021: https://www.ramsar.org/sites/default/files/documents/pdf/res/key_res_viii_14_e.pdf).

(3)   

2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (version of 4.6.2021: https://www.ipcc-nggip.iges.or.jp/public/2019rf/).

(4)   

Which implements in the Union the Stockholm Convention on persistent organic pollutants (OJ L 209, 31.7.2006, p. 3).

(5)   

The WHO Recommended Classification of Pesticides by Hazard (version 2019), (version of 4.6.2021: https://apps.who.int/iris/bitstream/handle/10665/332193/9789240005662-eng.pdf?ua=1).

3.   MANUFACTURING

3.1.    Manufacture of renewable energy technologies

Description of the activity

Manufacture of renewable energy technologies, where renewable energy is defined in Article 2(1) of Directive (EU) 2018/2001.

The economic activities in this category could be associated with several NACE codes, in particular C25, C27, C28 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The economic activity manufactures renewable energy technologies.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The activity assesses the availability of and, where feasible, adopts techniques that support:

(a)  reuse and use of secondary raw materials and re-used components in products manufactured;

(b)  design for high durability, recyclability, easy disassembly and adaptability of products manufactured;

(c)  waste management that prioritises recycling over disposal, in the manufacturing process;

(d)  information on and traceability of substances of concern throughout the lifecycle of the manufactured products.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

3.2.    Manufacture of equipment for the production and use of hydrogen

Description of the activity

Manufacture of equipment for the production and use of hydrogen.

The economic activities in this category could be associated with several NACE codes, in particular C25, C27, C28, in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The economic activity manufactures equipment for the production of hydrogen compliant with the Technical Screening Criteria set out in Section 3.10 of this Annex and equipment for the use of hydrogen.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The activity assesses the availability of and, where feasible, adopts techniques that support:

(a)  reuse and use of secondary raw materials and re-used components in products manufactured;

(b)  design for high durability, recyclability, easy disassembly and adaptability of products manufactured;

(c)  waste management that prioritises recycling over disposal, in the manufacturing process;

(d)  information on and traceability of substances of concern throughout the life cycle of the manufactured products.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

3.3.    Manufacture of low carbon technologies for transport

Description of the activity

Manufacture, repair, maintenance, retrofitting, repurposing and upgrade of low carbon transport vehicles, rolling stock and vessels.

The economic activities in this category could be associated with several NACE codes, in particular C29.1, C30.1, C30.2, C30.9, C33.15, C33.17 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The economic activity manufactures, repairs, maintains, retrofits (1), repurposes or upgrades:

(a)  trains, passenger coaches and wagons that have zero direct (tailpipe) CO2 emissions;

(b)  trains, passenger coaches and wagons that have zero direct tailpipe CO2 emission when operated on a track with necessary infrastructure, and use a conventional engine where such infrastructure is not available (bimode);

(c)  urban, suburban and road passenger transport devices, where the direct (tailpipe) CO2 emissions of the vehicles are zero;

(d)  until 31 December 2025, vehicles designated as categories M2 and M3 (2) that have a type of bodywork classified as ‘CA’ (single-deck vehicle), ‘CB’ (double-deck vehicle), ‘CC’ (single-deck articulated vehicle) or ‘CD’ (double-deck articulated vehicle) (3), and comply with the latest EURO VI standard, i.e. both with the requirements of Regulation (EC) No 595/2009 of the European Parliament and of the Council (4) and, from the time of the entry into force of amendments to that Regulation, in those amending acts, even before they become applicable, and with the latest step of the Euro VI standard set out in Table 1 of Appendix 9 to Annex I to Commission Regulation (EU) No 582/2011 (5) where the provisions governing that step have entered into force but have not yet become applicable for this type of vehicle (6). Where such standard is not available, the direct CO2 emissions of the vehicles are zero;

(e)  personal mobility devices with a propulsion that comes from the physical activity of the user, from a zero-emissions motor, or a mix of zero-emissions motor and physical activity;

(f)  vehicles of category M1 and N1 classified as light-duty vehicles (7) with:

(i)  until 31 December 2025: specific emissions of CO2, as defined in Article 3(1), point (h), of Regulation (EU) 2019/631 of the European Parliament and of the Council (8), lower than 50 g CO2/km (low- and zero-emission light-duty vehicles);

(ii)  from 1 January 2026: specific emissions of CO2, as defined in Article 3(1), point (h), of Regulation (EU) 2019/631, are zero;

(g)  vehicles of category L (9) with tailpipe CO2 emissions equal to 0 g CO2e/km calculated in accordance with the emission test laid down in Regulation (EU) 168/2013 of the European Parliament and of the Council (10);

(h)  vehicles of categories N2 and N3, and N1 classified as heavy-duty vehicles, not dedicated to transporting fossil fuels with a technically permissible maximum laden mass not exceeding 7,5 tonnes that are ‘zero-emission heavy-duty vehicles’ as defined in Article 3, point (11), of Regulation (EU) 2019/1242 of the European Parliament and of the Council (11);

(i)  vehicles of categories N2 and N3 not dedicated to transporting fossil fuels with a technically permissible maximum laden mass exceeding 7,5 tonnes that are zero-emission heavy-duty vehicles’, as defined in Article 3, point (11), of Regulation (EU) 2019/1242 or ‘low-emission heavy-duty vehicles’ as defined in Article 3, point (12) of that Regulation;

(j)  inland passenger water transport vessels that:

(i)  have zero direct (tailpipe) CO2 emissions;

(ii)  until 31 December 2025, are hybrid and dual fuel vessels using at least 50 % of their energy from zero direct (tailpipe) CO2 emission fuels or plug-in power for their normal operation;

(k)  inland freight water transport vessels, not dedicated to transporting fossil fuels, that:

(i)  have zero direct (tailpipe) CO2 emission;

(ii)  until 31 December 2025, have direct (tailpipe) emissions of CO2 per tonne kilometre (g CO2/tkm), calculated (or estimated in case of new vessels) using the Energy Efficiency Operational Indicator (12), 50 % lower than the average reference value for emissions of CO2 defined for heavy duty vehicles (vehicle subgroup 5-LH) in accordance with Article 11 of Regulation (EU) 2019/1242;

(l)  sea and coastal freight water transport vessels, vessels for port operations and auxiliary activities, that are not dedicated to transporting fossil fuels, that:

(i)  have zero direct (tailpipe) CO2 emissions;
(ii)  until 31 December 2025, are hybrid and dual fuel vessels that derive at least 25 % of their energy from zero direct (tailpipe) CO2 emission fuels or plug-in power for their normal operation at sea and in ports;
(iii)  until 31 December 2025, and only where it can be proved that the vessels are used exclusively for operating coastal and short sea services designed to enable modal shift of freight currently transported by land to sea, the vessels that have direct (tailpipe) CO2 emissions, calculated using the International Maritime Organization (IMO) Energy Efficiency Design Index (EEDI) (13), 50 % lower than the average reference CO2 emissions value defined for heavy duty vehicles (vehicle subgroup 5-LH) in accordance with Article 11 of Regulation (EU) 2019/1242;
(iv)  until 31 December 2025, the vessels have an attained Energy Efficiency Design Index (EEDI) value 10 % below the EEDI requirements applicable on 1 April 2022 (14) if the vessels are able to run on zero direct (tailpipe) CO2 emission fuels or on fuels from renewable sources (15); ►M2  
(v)  from 1 January 2026, vessels that are able to run on zero direct (tailpipe) CO2 emission fuels or on fuels from renewable sources (15) have an attained Energy Efficiency Design Index (EEDI) value equivalent to reducing the EEDI reference line by at least 20 percentage points below the EEDI requirements applicable on 1 April 2022 (18), and:
(a)  are able to plug-in at berth;
(b)  for gas-fuelled ships, demonstrate the use of state-of-the-art measures and technologies to mitigate methane slippage emissions;  ◄

(m)  sea and coastal passenger water transport vessels, not dedicated to transporting fossil fuels, that:

(i)  have zero direct (tailpipe) CO2 emissions;
(ii)  until 31 December 2025, hybrid and dual fuel vessels derive at least 25 % of their energy from zero direct (tailpipe) CO2 emission fuels or plug-in power for their normal operation at sea and in ports;
(iii)  until 31 December 2025, the vessels have an attained Energy Efficiency Design Index (EEDI) value 10 % below the EEDI requirements applicable on 1 April 2022 if the vessels are able to run on zero direct (tailpipe) CO2 emission fuels or on fuels from renewable sources (16); ►M2  
(iv)  from 1 January 2026, vessels that are able to run on zero direct (tailpipe) CO2 emission fuels or on fuels from renewable sources (16) have an attained Energy Efficiency Design Index (EEDI) value equivalent to reducing the EEDI reference line by at least 20 percentage points below the EEDI requirements applicable on 1 April 2022 (19), and:
(a)  are able to plug-in at berth;
(b)  for gas-fuelled ships, demonstrate the use of state-of-the-art measures and technologies to mitigate methane slippage emissions.  ◄

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The activity assesses the availability of and, where feasible, adopts techniques that support:

(a)  reuse and use of secondary raw materials and re-used components in products manufactured;

(b)  design for high durability, recyclability, easy disassembly and adaptability of products manufactured;

(c)  waste management that prioritises recycling over disposal, in the manufacturing process;

(d)  information on and traceability of substances of concern throughout the life cycle of the manufactured products.

▼M2

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Where applicable, vehicles do not contain lead, mercury, hexavalent chromium and cadmium.

▼B

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

For points (j) to (m), the criteria related to retrofitting are covered in Sections 6.9 and 6.12 of this Annex.

(2)   

As referred to in Article 4(1), point (a), of Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/EC (OJ L 151, 14.06.2018, p. 1).

(3)   

As set out in point 3 of part C of Annex I to Regulation (EU) 2018/858.

(4)   

Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) and on access to vehicle repair and maintenance information and amending Regulation (EC) No 715/2007 and Directive 2007/46/EC and repealing Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC (OJ L 188, 18.7.2009, p. 1).

(5)   

Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (OJ L 167, 25.6.2011, p. 1).

(6)   

Until 31/12/2022, the EURO VI, step E as set out in Regulation (EC) No 595/2009.

(7)   

As defined in Article 4(1), points (a) and (b) of Regulation (EU) 2018/858).

(8)   

Regulation (EU) 2019/631 of the European Parliament and of the Council of 17 April 2019 setting CO2 emission performance standards for new passenger cars and for new light commercial vehicles, and repealing Regulations (EC) No 443/2009 and (EU) No 510/2011 (OJ L 111, 25.4.2019, p. 13).

(9)   

As defined in Article 4 of Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (OJ L 60, 2.3.2013, p. 52).

(10)   

Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (OJ L 60, 2.3.2013, p. 52).

(11)   

Regulation (EU) 2019/1242 of the European Parliament and of the Council of 20 June 2019 setting CO2 emission performance standards for new heavy-duty vehicles and amending Regulations (EC) No 595/2009 and (EU) 2018/956 of the European Parliament and of the Council and Council Directive 96/53/EC (OJ L 198, 25.7.2019, p. 202).

(12)   

The Energy Efficiency Operational Indicator is defined as the ratio of mass of CO2 emitted per unit of transport work. It is a representative value of the energy efficiency of the ship operation over a consistent period which represents the overall trading pattern of the vessel. Guidance on how to calculate this indicator is provided in the document MEPC.1/Circ. 684 from IMO.

(13)   

Energy Efficiency Design Index (version of 4.6.2021: http://www.imo.org/fr/MediaCentre/HotTopics/GHG/Pages/EEDI.aspx).

(14)   

EEDI requirements applicable on 1 April 2022 as agreed by the Marine Environment Protection Committee of the International Maritime Organization on its seventy fourth session.

(15)   

Fuels that meet the technical screening criteria specified in Sections 3.10 and 4.13 of this Annex.

(16)   

Fuels that meet the technical screening criteria specified in Sections 3.10 and 4.13 of this Annex.

(17)   

Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of life vehicles (OJ L 269, 21.10.2000, p. 34).

(18)   

EEDI requirements specified as a percentage reduction factor, to be applied to the EEDI reference value, as agreed by the Marine Environment Protection Committee of the International Maritime Organization on its seventy-fifth session. The defined percentage points in the technical screening criteria for EEDI shall be added to EEDI percentage reduction factor.

(19)   

EEDI requirements defined as a percentage reduction factor, to be applied to the EEDI reference value, as agreed by the Marine Environment Protection Committee of the International Maritime Organization on its seventy-fifth session. The defined percentage points in the technical screening criteria for EEDI shall be added to EEDI percentage reduction factor.

3.4.    Manufacture of batteries

Description of the activity

Manufacture of rechargeable batteries, battery packs and accumulators for transport, stationary and off-grid energy storage and other industrial applications. Manufacture of respective components (battery active materials, battery cells, casings and electronic components).

Recycling of end-of-life batteries.

The economic activities in this category could be associated with NACE code C27.2 and E38.32 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The economic activity manufactures rechargeable batteries, battery packs and accumulators (and their respective components), including from secondary raw materials, that result in substantial GHG emission reductions in transport, stationary and off-grid energy storage and other industrial applications.

The economic activity recycles end-of-life batteries.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

For manufacturing of new batteries, components and materials, the activity assesses the availability of and, where feasible, adopts techniques that support:

(a)  reuse and use of secondary raw materials and reused components in products manufactured;

(b)  design for high durability, recyclability, easy disassembly and adaptability of products manufactured;

(c)  information on and traceability of substances of concern throughout the life cycle of the manufactured products.

Recycling processes meet the conditions set out in Article 12 of Directive 2006/66/EC of the European Parliament and of the Council (1) and in Annex III, Part B, to that Directive, including the use of the latest relevant Best Available Techniques, the achievement of the efficiencies specified for lead-acid batteries, nickel-cadmium batteries and for other chemistries. These processes ensure the recycling of the metal content to the highest degree that is technically feasible while avoiding excessive costs.

Where applicable, facilities carrying out recycling processes meet the requirements laid down in Directive 2010/75/EU of the European Parliament and of the Council (2).

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Batteries comply with the applicable sustainability rules on the placing on the market of batteries in the Union, including restrictions on the use of hazardous substances in batteries, including Regulation (EC) No 1907/2006 of the European Parliament and of the Council (3) and Directive 2006/66/EC.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators and waste batteries and accumulators and repealing Directive 91/157/EEC (OJ L 266, 26.9.2006, p. 1).

(2)   

Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control) (OJ L 334, 17.12.2010, p. 17)

(3)   

Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).

3.5.    Manufacture of energy efficiency equipment for buildings

Description of the activity

Manufacture of energy efficiency equipment for buildings.

The economic activities in this category could be associated with several NACE codes, in particular C16.23, C23.11, C23.20, C23.31, C23.32, C23.43, C.23.61, C25.11, C25.12, C25.21, C25.29, C25.93, C27.31, C27.32, C27.33, C27.40, C27.51, C28.11, C28.12, C28.13, C28.14, in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The economic activity manufactures one or more of the following products and their key components (1):

(a)  windows with U-value lower or equal to 1,0 W/m2K;

(b)  doors with U-value lower or equal to 1,2 W/m2K;

(c)  external wall systems with U-value lower or equal to 0,5 W/m2K;

(d)  roofing systems with U-value lower or equal to 0,3 W/m2K;

(e)  insulating products with a lambda value lower or equal to 0,06 W/mK;

(f)  household appliances falling into the highest two populated classes of energy efficiency in accordance with Regulation (EU) 2017/1369 of the European Parliament and of the Council (2) and delegated acts adopted under that Regulation;

(g)  light sources rated in the highest two populated classes of energy efficiency in accordance with Regulation (EU) 2017/1369 and delegated acts adopted under that Regulation;

(h)  space heating and domestic hot water systems rated in the highest two populated classes of energy efficiency in accordance with Regulation (EU) 2017/1369 and delegated acts adopted under that Regulation;

(i)  cooling and ventilation systems rated in the highest two populated classes of energy efficiency in accordance with Regulation (EU) 2017/1369 and delegated acts adopted under that Regulation;

(j)  presence and daylight controls for lighting systems;

(k)  heat pumps compliant with the technical screening criteria set out in Section 4.16 of this Annex;

(l)  façade and roofing elements with a solar shading or solar control function, including those that support the growing of vegetation;

(m)  energy-efficient building automation and control systems for residential and non-residential buildings;

(n)  zoned thermostats and devices for the smart monitoring of the main electricity loads or heat loads for buildings, and sensoring equipment;

(o)  products for heat metering and thermostatic controls for individual homes connected to district heating systems, for individual flats connected to central heating systems serving a whole building, and for central heating systems;

(p)  district heating exchangers and substations compliant with the district heating/cooling distribution activity set out in Section 4.15 of this Annex;

(q)  products for smart monitoring and regulating of heating system, and sensoring equipment.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The activity assesses the availability of and, where feasible, adopts techniques that support:

(a)  reuse and use of secondary raw materials and reused components in products manufactured;

(b)  design for high durability, recyclability, easy disassembly and adaptability of products manufactured;

(c)  waste management that prioritises recycling over disposal, in the manufacturing process;

(d)  information on and traceability of substances of concern throughout the life cycle of the manufactured products.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Where relevant, the U-value is calculated according to the applicable standards, e.g. EN ISO 10077-1:2017 (windows and doors), EN ISO 12631:2017 (curtain walls) and EN ISO 6946:2017 (other building components and elements).

(2)   

Regulation (EU) 2017/1369 of the European Parliament and of the Council of 4 July 2017 setting a framework for energy labelling and repealing Directive 2010/30/EU (OJ L 198, 28.7.2017, p. 1).

3.6.    Manufacture of other low carbon technologies

Description of the activity

Manufacture of technologies aimed at substantial GHG emission reductions in other sectors of the economy, where those technologies are not covered in Sections 3.1 to 3.5 of this Annex.

The economic activities in this category could be associated with several NACE codes, in particular from C22, C25, C26, C27 and C28 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The economic activity manufactures technologies that are aimed at and demonstrate substantial life-cycle GHG emission savings compared to the best performing alternative technology/product/solution available on the market.

Life-cycle GHG emission savings are calculated using Commission Recommendation 2013/179/EU (1) or, alternatively, ISO 14067:2018 (2) or ISO 14064-1:2018 (3).

Quantified life-cycle GHG emission savings are verified by an independent third party.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The activity assesses the availability of and, where feasible, adopts techniques that support:

(a)  reuse and use of secondary raw materials and reused components in products manufactured;

(b)  design for high durability, recyclability, easy disassembly and adaptability of products manufactured;

(c)  waste management that prioritises recycling over disposal, in the manufacturing process;

(d)  information on and traceability of substances of concern throughout the life cycle of the manufactured products.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Commission Recommendation 2013/179/EU of 9 April 2013 on the use of common methods to measure and communicate the life cycle environmental performance of products and organisations (OJ L 124, 4.5.2013, p. 1).

(2)   

ISO standard 14067:2018, Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification (version of 4.6.2021: https://www.iso.org/standard/71206.html).

(3)   

ISO standard 14064-1:2018, Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (version of 4.6.2021: https://www.iso.org/standard/66453.html).

3.7.    Manufacture of cement

Description of the activity

Manufacture of cement clinker, cement or alternative binder.

The economic activities in this category could be associated with NACE code C23.51 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity manufactures one of the following:

(a)  grey cement clinker where the specific GHG emissions (1) are lower than 0,722 (2) tCO2e per tonne of grey cement clinker;

(b)  cement from grey clinker or alternative hydraulic binder, where the specific GHG emissions (3) from the clinker and cement or alternative binder production are lower than 0,469 (4) tCO2e per tonne of cement or alternative binder manufactured.

Where CO2 that would otherwise be emitted from the manufacturing process is captured for the purpose of underground storage, the CO2 is transported and stored underground, in accordance with the technical screening criteria set out in Sections 5.11 and 5.12 of this Annex.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for the production of cement, lime and magnesium oxide (5).

No significant cross-media effects occur (6).

For manufacture of cement employing hazardous wastes as alternative fuels, measures are in place to ensure the safe handling of waste.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Calculated in accordance with Commission Delegated Regulation (EU) 2019/331 of 19 December 2018 determining transitional Union-wide rules for harmonised free allocation of emission allowances pursuant to Article 10a of Directive 2003/87/EC of the European Parliament and of the Council (OJ L 59, 27.2.2019, p. 8).

(2)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Commission Implementing Regulation (EU) 2021/447 of 12 March 2021 determining revised benchmark values for free allocation of emission allowances for the period from 2021 to 2025 pursuant to Article 10a(2) of Directive 2003/87/EC of the European Parliament and of the Council, (OJ L 87, 15.3.2021, p. 29).

(3)   

Calculated in accordance with Regulation (EU) 2019/331.

(4)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) for grey cement clinker as set out in the Annex to the Implementing Regulation (EU) 2021/447, multiplied by the clinker to cement ratio of 0,65.

(5)   

Commission Implementing Decision 2013/163/EU of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (OJ L 100, 9.4.2013, p. 1).

(6)   

See Best Available Techniques Reference Document (BREF) on Economics and Cross-Media Effects (version of 4.6.2021: https://eippcb.jrc.ec.europa.eu/sites/default/files/2019-11/ecm_bref_0706.pdf).

3.8.    Manufacture of aluminium

Description of the activity

Manufacture of aluminium through primary alumina (bauxite) process or secondary aluminium recycling.

The economic activities in this category could be associated with NACE code C24.42, C24.53 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity manufactures one of the following:

(a)  primary aluminium where the economic activity complies with two of the following criteria until 2025 and with all of the following criteria (1) after 2025:

(i)  the GHG emissions (2) do not exceed 1,484 (3) tCO2e per ton of aluminium manufactured (4):

(ii)  the average carbon intensity for the indirect GHG emissions (5) does not exceed 100 g CO2e/kWh;

(iii)  the electricity consumption for the manufacturing process does not exceed 15,5 MWh/t Al.

(b)  secondary aluminium.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for the non-ferrous metals industries (6). No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Combined to a single threshold resulting in the sum of direct and indirect emissions, calculated as the average value of the top 10 % of installations based on the data collected in the context of establishing the EU ETS industrial benchmarks for the period of 2021-2026 and calculated in accordance with the methodology for setting the benchmarks set out in Directive 2003/87/EC plus the substantial contribution to climate change mitigation criterion for electricity generation (100 g CO2e/kWh) multiplied by the average energy efficiency of aluminium manufacturing (15,5 MWh/t Al).

(2)   

Calculated in accordance with Regulation (EU) 2019/331.

(3)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(4)   

The aluminium manufactured is the unwrought non alloy liquid aluminium produced from electrolysis.

(5)   

Indirect greenhouse gas emissions are the life-cycle greenhouse gas emissions produced from the generation of the electricity used for the manufacturing of primary aluminium.

(6)   

Commission Implementing Decision (EU) 2016/1032 of 13 June 2016 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the non-ferrous metals industries (OJ L 174, 30.6.2016, p. 32).

3.9.    Manufacture of iron and steel

Description of the activity

Manufacture of iron and steel.

The economic activities in this category could be associated with several NACE codes, in particular C24.10, C24.20, C24.31, C24.32, C24.33, C24.34, C24.51 and C24.52 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity manufactures one of the following:

(a)  iron and steel where GHG emissions (1), reduced by the amount of emissions assigned to the production of waste gases in accordance with point 10.1.5(a) of Annex VII to Regulation (EU) 2019/331 do not exceed the following values applied to the different manufacturing process steps:

(i)  hot metal = 1,331 (2) tCO2e/t product;

(ii)  sintered ore = 0,163 (3) tCO2e/t product;

(iii)  coke (excluding lignite coke) = 0,144 (4) tCO2e/t product;

(iv)  iron casting = 0,299 (5) tCO2e/t product;

(v)  electric Arc Furnace (EAF) high alloy steel = 0,266 (6) tCO2e/t product;

(vi)  electric Arc Furnace (EAF) carbon steel = 0,209 (7) tCO2e/t product.

(b)  steel in electric arc furnaces (EAFs) producing EAF carbon steel or EAF high alloy steel, as defined in Commission Delegated Regulation (EU) 2019/331 and where the steel scrap input relative to product output is not lower than:

(i)  70 % for the production of high alloy steel;

(ii)  90 % for the production of carbon steel.

Where the CO2 that would otherwise be emitted from the manufacturing process is captured for the purpose of underground storage, the CO2 is transported and stored underground, in accordance with the technical screening criteria set out in Sections 5.11 and 5.12 of this Annex.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for iron and steel production (8).

No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Calculated in accordance with Regulation (EU) 2019/331.

(2)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(3)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(4)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(5)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(6)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(7)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(8)   

Commission Implementing Decision 2012/135/EU of 28 February 2012 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for iron and steel production (OJ L 70, 8.3.2012, p. 63).

3.10.    Manufacture of hydrogen

Description of the activity

Manufacture of hydrogen and hydrogen-based synthetic fuels.

The economic activities in this category could be associated with NACE code C20.11 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity complies with the life-cycle GHG emissions savings requirement of 73,4 % for hydrogen [resulting in life-cycle GHG emissions lower than 3tCO2e/tH2] and 70 % for hydrogen-based synthetic fuels relative to a fossil fuel comparator of 94 g CO2e/MJ in analogy to the approach set out in Article 25(2) of and Annex V to Directive (EU) 2018/2001.

Life-cycle GHG emissions savings are calculated using the methodology referred to in Article 28(5) of Directive (EU) 2018/2001 or, alternatively, using ISO 14067:2018 (1) or ISO 14064-1:2018 (2).

Quantified life-cycle GHG emission savings are verified in line with Article 30 of Directive (EU) 2018/2001 where applicable, or by an independent third party.

Where the CO2 that would otherwise be emitted from the manufacturing process is captured for the purpose of underground storage, the CO2 is transported and stored underground, in accordance with the technical screening criteria set out in Sections 5.11 and 5.12, respectively, of this Annex.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the relevant best available techniques (BAT) conclusions, including:

(a)  the best available techniques (BAT) conclusions for the production of chlor-alkali (3) and the best available techniques (BAT) conclusions for common waste water and waste gas treatment/management systems in the chemical sector (4);

(b)  the best available techniques (BAT) conclusions for the refining of mineral oil and gas (5).

No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

ISO standard 14067:2018, Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification (version of 4.6.2021: https://www.iso.org/standard/71206.html).

(2)   

ISO standard 14064-1:2018, Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (version of 4.6.2021: https://www.iso.org/standard/66453.html).

(3)   

Commission Implementing Decision 2013/732/EU of 9 December 2013 establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for the production of chlor-alkali (OJ L 332, 11.12.2013, p. 34).

(4)   

Commission Implementing Decision (EU) 2016/902 of 30 May 2016 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for common waste water and waste gas treatment/management systems in the chemical sector (OJ L 152, 9.6.2016, p. 23).

(5)   

Commission Implementing Decision 2014/738/EU of 9 October 2014 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for the refining of mineral oil and gas (OJ L 307, 28.10.2014, p. 38).

3.11.    Manufacture of carbon black

Description of the activity

Manufacture of carbon black.

The economic activities in this category could be associated with NACE code C20.13 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

GHG emissions (1) from the carbon black production processes are lower than 1,141 (2) tCO2e per tonne of product.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including:

(a)  the Best Available Techniques Reference Document (BREF) for the Large Volume Inorganic Chemicals – Solids and Others industry (3);

(b)  the best available techniques (BAT) conclusions for common waste water and waste gas treatment/management systems in the chemical sector (4).

No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Calculated in accordance with Regulation (EU) 2019/331.

(2)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(3)   

Best Available Techniques (BAT) Reference Document for the Large Volumes Inorganic Chemicals- Solids and Others industry, (version of 4.6.2021: https://eippcb.jrc.ec.europa.eu/sites/default/files/2019-11/lvic-s_bref_0907.pdf).

(4)   

Implementing Decision (EU) 2016/902.

3.12.    Manufacture of soda ash

Description of the activity

Manufacture of disodium carbonate (soda ash, sodium carbonate, carbonic acid disodium salt).

The economic activities in this category could be associated with NACE code C20.13 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

GHG emissions (1) from the soda ash production processes are lower than 0,789 (2) tCO2e per tonne of product.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including:

(a)  the Best Available Techniques Reference Document (BREF) for the Large Volume Inorganic Chemicals – Solids and Others industry (3);

(b)  the best available techniques (BAT) conclusions for common waste water and waste gas treatment/management systems in the chemical sector (4).

No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Calculated in accordance with Regulation (EU) 2019/331.

(2)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(3)   

Best Available Techniques (BAT) Reference Document for the Large Volumes Inorganic Chemicals- Solids and Others industry (version of 4.6.2021: https://eippcb.jrc.ec.europa.eu/sites/default/files/2019-11/lvic-s_bref_0907.pdf).

(4)   

Implementing Decision (EU) 2016/902.

3.13.    Manufacture of chlorine

Description of the activity

Manufacture of chlorine.

The economic activities in this category could be associated with NACE code C20.13 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

Electricity consumption for electrolysis and chlorine treatment is equal or lower than 2.45 MWh per tonne of chlorine.

Average life-cycle GHG emissions of the electricity used for chlorine production is at or lower than 100 g CO2e/kWh.

Life-cycle GHG emissions are calculated using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 (1) or ISO 14064-1:2018 (2).

Quantified life-cycle GHG emissions are verified by an independent third party.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including:

(a)  the best available techniques (BAT) conclusions for the production of chlor-alkali (3);

(b)  the best available techniques (BAT) conclusions for common waste water and waste gas treatment/management systems in the chemical sector (4).

No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

ISO standard 14067:2018, Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification (version of 4.6.2021: https://www.iso.org/standard/71206.html).

(2)   

ISO standard 14064-1:2018, Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (version of 4.6.2021: https://www.iso.org/standard/66453.html).

(3)   

Implementing Decision 2013/732/EU.

(4)   

Implementing Decision (EU) 2016/902.

3.14.    Manufacture of organic basic chemicals

Description of the activity

Manufacture of:

(a) 

high value chemicals (HVC):

(i) 

acetylene;

(ii) 

ethylene;

(iii) 

propylene;

(iv) 

butadiene.

(b) 

Aromatics:

(i) 

mixed alkylbenzenes, mixed alkylnaphthalenes other than HS 2707 or 2902 ;

(ii) 

cyclohexane;

(iii) 

benzene;

(iv) 

toluene;

(v) 

o-Xylene;

(vi) 

p-Xylene;

(vii) 

m-Xylene and mixed xylene isomers;

(viii) 

ethylbenzene;

(ix) 

cumene;

(x) 

biphenyl, terphenyls, vinyltoluenes, other cyclic hydrocarbons excluding cyclanes, cyclenes, cycloterpenes, benzene, toluene, xylenes, styrene, ethylbenzene, cumene, naphthalene, anthracene;

(xi) 

benzol (benzene), toluol (toluene) and xylol (xylenes)

(xii) 

naphthalene and other aromatic hydrocarbon mixtures (excluding benzole, toluole, xylole).

(c) 

vinyl chloride;

(d) 

styrene;

(e) 

ethylene oxide;

(f) 

monoethylene glycol;

(g) 

adipic acid.

The economic activities in this category could be associated with NACE code C20.14 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

GHG emissions (1) from the organic basic chemicals production processes are lower than:

(a)  for HVC: 0,693 (2) tCO2e/t of HVC;

(b)  for aromatics: 0,0072 (3) tCO2e/t of complex weighted throughput;

(c)  for vinyl chloride: 0,171 (4) tCO2e/t of vinyl chloride;

(d)  for styrene: 0,419 (5) tCO2e/t of styrene;

(e)  for ethylene oxide/ethylene glycols: 0,314 (6) tCO2e/t of ethylene oxide/glycol;

(f)  for adipic acid: 0,32 (7) tCO2e /t of adipic acid.

Where the organic chemicals in scope are produced wholly or partially from renewable feedstock, the life-cycle GHG emissions of the manufactured chemical, manufactured wholly or partially from renewable feedstock, are lower than the life-cycle GHG emissions of the equivalent chemical manufactured from fossil fuel feedstock.

Life-cycle GHG emissions are calculated using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 (8) or ISO 14064-1:2018 (9).

Quantified life-cycle GHG emissions are verified by an independent third party.

Agricultural biomass used for the manufacture of organic basic chemicals complies with the criteria laid down in Article 29, paragraphs 2 to 5 of Directive (EU) 2018/2001. Forest biomass used for the manufacture of organic basic chemicals complies with the criteria laid down in Article 29, paragraphs 6 and 7 of that Directive.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in relevant best available techniques (BAT) conclusions, including:

(a)  the best available techniques (BAT) conclusions for the production of large volumes organic chemicals (10);

(b)  the best available techniques (BAT) conclusions for common waste water and waste gas treatment/management systems in the chemical sector (11).

No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Calculated in accordance with Regulation (EU) 2019/331.

(2)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(3)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(4)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(5)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(6)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(7)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(8)   

ISO standard 14067:2018, Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification (version of 4.6.2021: https://www.iso.org/standard/71206.html).

(9)   

ISO standard 14064-1:2018, Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (version of 4.6.2021: https://www.iso.org/standard/66453.html).

(10)   

Commission Implementing Decision (EU) 2017/2117 of 21 November 2017 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the production of large volume organic chemicals (OJ L 323, 7.12.2017, p. 1).

(11)   

Implementing Decision (EU) 2016/902.

3.15.    Manufacture of anhydrous ammonia

Description of the activity

Manufacture of anhydrous ammonia.

The economic activities in this category could be associated with NACE code C20.15 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity complies with one of the following criteria:

(a)  ammonia is produced from hydrogen that complies with the technical screening criteria set out in Section 3.10 of this Annex (Manufacturing of hydrogen);

(b)  ammonia is recovered from waste water.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including:

(a)  the Best Available Techniques Reference Document (BREF) for the manufacture of Large Volume Inorganic Chemicals - Ammonia, Acids and Fertilisers (1);

(b)  the best available techniques (BAT) conclusions for common waste water and waste gas treatment/management systems in the chemical sector (2).

No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Best Available Techniques (BAT) Reference Document for the manufacture of Large Volume Inorganic Chemicals - Ammonia, Acids and Fertilisers (version of 4.6.2021: https://eippcb.jrc.ec.europa.eu/sites/default/files/2019-11/lvic_aaf.pdf).

(2)   

Implementing Decision (EU) 2016/902.

3.16.    Manufacture of nitric acid

Description of the activity

Manufacture of nitric acid.

The economic activities in this category could be associated with NACE code C20.15 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

GHG emissions (1) from the manufacture of nitric acid are lower than 0,038 (2) tCO2e per tonne of nitric acid.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including:

(a)  the Best Available Techniques Reference Document (BREF) for the manufacture of Large Volume Inorganic Chemicals - Ammonia, Acids and Fertilisers (3);

(b)  the best available techniques (BAT) conclusions for common waste water and waste gas treatment/management systems in the chemical sector (4).

No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Calculated in accordance with the Regulation (EU) 2019/331.

(2)   

Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t) as set out in the Annex to the Implementing Regulation (EU) 2021/447.

(3)   

Best Available Techniques (BAT) Reference Document for the manufacture of Large Volume Inorganic Chemicals - Ammonia, Acids and Fertilisers (version of 4.6.2021: https://eippcb.jrc.ec.europa.eu/sites/default/files/2019-11/lvic_aaf.pdf).

(4)   

Implementing Decision (EU) 2016/902.

3.17.    Manufacture of plastics in primary form

Description of the activity

Manufacture resins, plastics materials and non-vulcanisable thermoplastic elastomers, the mixing and blending of resins on a custom basis, as well as the manufacture of non-customised synthetic resins.

The economic activities in this category could be associated with NACE code C20.16 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity complies with one of the following criteria:

(a)  the plastic in primary form is fully manufactured by mechanical recycling of plastic waste;

(b)  where mechanical recycling is not technically feasible or economically viable, the plastic in primary form is fully manufactured by chemical recycling of plastic waste and the life-cycle GHG emissions of the manufactured plastic, excluding any calculated credits from the production of fuels, are lower than the life-cycle GHG emissions of the equivalent plastic in primary form manufactured from fossil fuel feedstock. Life-cycle GHG emissions are calculated using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 (1) or ISO 14064-1:2018 (2). Quantified life-cycle GHG emissions are verified by an independent third party.

(c)  derived wholly or partially from renewable feedstock (3) and its life-cycle GHG emissions are lower than the life-cycle GHG emissions of the equivalent plastics in primary form manufactured from fossil fuel feedstock. Life-cycle GHG emissions are calculated using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 or ISO 14064-1:2018. Quantified life-cycle GHG emissions are verified by an independent third party.

Agricultural biomass used for the manufacture of plastics in its primary form complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001. Forest biomass used for the manufacture of plastics in its primary form complies with the criteria laid down in Article 29, paragraphs 6 and 7, of that Directive.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in relevant best available techniques (BAT) conclusions, including:

(a)  the Best Available Techniques Reference Document (BREF) for the Production of Polymers (4);

(b)  the best available techniques (BAT) conclusions for common waste water and waste gas treatment/management systems in the chemical sector (5).

No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

ISO standard 14067:2018, Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification (version of 4.6.2021: https://www.iso.org/standard/71206.html).

(2)   

ISO standard 14064-1:2018, Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (version of 4.6.2021: https://www.iso.org/standard/66453.html).

(3)   

Renewable feedstock refers to biomass, industrial bio-waste or municipal bio-waste.

(4)   

Best Available Techniques (BAT) Reference Document for the Production of Polymers (version of 4.6.2021: https://eippcb.jrc.ec.europa.eu/sites/default/files/2019-11/pol_bref_0807.pdf).

(5)   

Commission Implementing Decision (EU) 2016/902 of 30 May 2016 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for common waste water and waste gas treatment/management systems in the chemical sector.( OJ L 152, 9.6.2016, p. 23).

▼M2

3.18.    Manufacture of automotive and mobility components

Description of the activity

Manufacture, repair, maintenance, retrofitting, repurposing and upgrade of mobility components for zero-emission personal mobility devices and of automotive and mobility systems, components, separate technical units, parts and spare parts as defined in Article 3, points (18) to (21) and (23) of Regulation (EU) 2018/858 of the European Parliament and of the Council ( 19 ), type approved, designed, and constructed for use only in vehicles and buses of category M1, M2, M3, N1, N2 and N3, and in Article 3, points (15) to (18) and (21) in Regulation (EU) No 168/2013 of the European Parliament and of the Council ( 20 ), type approved, designed, and constructed for use only in vehicles of category L meeting the criteria set out in this Section and which are essential for delivering and improving the environmental performance of the vehicle.

The economic activities in this category are excluded from Sections 3.3. and 3.6. of this Annex.

Where Sections 3.2. and 3.4. of this Annex are applicable, the economic activities in this category are excluded from this Section.

The economic activities in this category could be associated with several NACE codes, in particular C22.2, C26.1, C26.2, 26.3, 26.4, C28.14, C28.15, C29.2, C29.3, and C33.17 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The economic activity manufactures, repairs, maintains, retrofits, repurposes and upgrades components that are essential for delivering and improving the environmental performance for the following vehicles:

(a)  urban, suburban and road passenger transport devices, where the direct (tailpipe) CO2 emissions of the vehicles are zero;

(b)  vehicles designated as categories M2 and M3 (1) where the direct (tailpipe) CO2 emissions of the vehicles are zero;

(c)  vehicles of category M1 and N1 classified as light-duty vehicles (2) where specific emissions of CO2, as defined in Article 3(1), point (h), of Regulation (EU) 2019/631 of the European Parliament and of the Council (3), are zero;

(d)  vehicles of category L (4) with tailpipe CO2 emissions equal to 0 g CO2e/km calculated in accordance with the emission test laid down in Regulation (EU) No 168/2013;

(e)  vehicles of categories N2 and N3, and N1 classified as heavy-duty vehicles, not dedicated to transporting fossil fuels with a technically permissible maximum laden mass not exceeding 7,5 tonnes that are ‘zero-emission heavy-duty vehicles’ as defined in Article 3, point (11), of Regulation (EU) 2019/1242 of the European Parliament and of the Council (5).

2.  The economic activity manufactures, repairs, maintains, retrofits, repurposes and upgrades mobility components for personal mobility devices with a propulsion that comes from the physical activity of the user, from a zero-emissions motor, or a mix of zero-emissions motor and physical activity.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex

(4)  Transition to a circular economy

The activity assesses the availability of and, where feasible, adopts techniques that support:

(a)  reuse and use of secondary raw materials and re-used components in products manufactured;

(b)  design for high durability, recyclability, easy disassembly and adaptability of products manufactured;

(c)  waste management that prioritises recycling over disposal, in the manufacturing process;

(d)  information on and traceability of substances of concern throughout the life cycle of the manufactured products.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex

Where applicable, the components and parts do not contain lead, mercury, hexavalent chromium and cadmium.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

As referred to in Article 4(1), point (a), of Regulation (EU) 2018/858.

(2)   

As defined in Article 4(1), points (a) and (b) of Regulation (EU) 2018/858.

(3)   

Regulation (EU) 2019/631 of the European Parliament and of the Council of 17 April 2019 setting CO2 emission performance standards for new passenger cars and for new light commercial vehicles, and repealing Regulations (EC) No 443/2009 and (EU) No 510/2011 (recast) (OJ L 111, 25.4.2019, p. 13).

(4)   

As defined in Article 4 of Regulation (EU) No 168/2013.

(5)   

Regulation (EU) 2019/1242 of the European Parliament and of the Council of 20 June 2019 setting CO2 emission performance standards for new heavy-duty vehicles and amending Regulations (EC) No 595/2009 and (EU) 2018/956 of the European Parliament and of the Council and Council Directive 96/53/EC (OJ L 198, 25.7.2019, p. 202).

3.19.    Manufacture of rail rolling stock constituents

Description of the activity

Manufacture, installation, technical consulting, retrofitting, upgrade, repair, maintenance, and repurposing of products, equipment, systems, and software related to the rail constituents detailed in Point 2.7 of Annex II to Directive (EU) 2016/797.

These constituents and services are essential to the environmental performance, operation and functioning over the lifetime of rail rolling stock that comply with Section 3.3. of this Annex.

The economic activities in this category could be associated with several NACE codes, in particular, C30.2 C27.1, C27.9 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

The economic activities in this category are excluded from Sections 3.3. and 3.6. of this Annex.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The economic activity manufactures, installs, retrofits, repairs, maintains, upgrades or repurposes products, equipment, systems or software related to the following rail constituents detailed in Point 2.7 of Annex II to Directive (EU) 2016/797 or provides related technical consulting services:

These constituents and services are essential to the environmental performance, operation and functioning over the lifetime of one or more of the technologies listed below:

(a)  trains, passenger coaches and wagons that have zero direct (tailpipe) CO2 emissions that comply with Section 3.3. of Annex I to this Regulation;

(b)  trains, passenger coaches and wagons that have zero direct tailpipe CO2 emission when operated on a track with necessary infrastructure, and use a conventional engine where such infrastructure is not available (bimode) that comply with Section 3.3. of Annex I to this Regulation.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The activity assesses the availability of and, where feasible, adopts techniques that support:

(a)  reuse and use of secondary raw materials and re-used components in products manufactured;

(b)  design for high durability, recyclability, easy disassembly and adaptability of products manufactured;

(c)  waste management that prioritises recycling over disposal, in the manufacturing process;

(d)  information on and traceability of substances of concern throughout the life cycle of the manufactured products.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Where applicable, vehicles do not contain lead, mercury, hexavalent chromium and cadmium.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

3.20.    Manufacture, installation, and servicing of high, medium and low voltage electrical equipment for electrical transmission and distribution that result in or enable a substantial contribution to climate change mitigation

Description of the activity

The economic activity develops, manufactures, installs, maintains or services electrical products, equipment or systems, or software aimed at substantial GHG emission reductions in high, medium and low voltage electrical transmission and distribution systems through electrification, energy efficiency, integration of renewable energy or efficient power conversion.

The economic activity includes systems to integrate renewable sources of energy in the electric grid, interconnect or increase grid automation, flexibility and stability, manage demand-side response, develop low carbon transport or heat, or deploy smart metering technologies for substantial improvement of energy efficiency.

The economic activity in this category does not include heat and power generating equipment and electrical appliances.

Where an economic activity falls under this Section and Section 4.9. of this Annex, Section 4.9. of this Annex applies.

The economic activities in this category could be associated with several NACE codes, in particular C26.51, C27.1, C27.3, C27.9, C33.13, C33.14 and C33.2 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity as referred to in Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The activity manufactures, installs, or maintains one or more of the following, or provides maintenance, repair and technical consulting services essential to the functioning over the lifetime of one or more of the following:

(a)  electric vehicle charging stations and supporting electric infrastructure for the electrification of transport that is installed primarily to enable electric vehicle charging.

Any activity included in Section 7.4. is excluded from this point;

(b)  transmission and distribution current-carrying wiring devices and non-current-carrying wiring devices for wiring electrical circuits, and transformers that comply with the Tier 2 (1 July 2021) requirements for large power transformers set out in Annex I to Commission Regulation (EU) No 548/2014 (1), and medium power transformers with highest voltage for equipment not exceeding 36 kV, with AA0 level requirements on no-load losses set out in standard EN 50708 series, provided those devices and transformers contribute to increasing the proportion of renewable energy in the system or improve energy efficiency;

(c)  low voltage electrical products, equipment and systems, that increase the controllability of the electricity system, and contribute to increasing the proportion of renewable energy or improve energy efficiency, that are:

(i)  low voltage circuit breakers, switchgears, switchboards, panel boards or control centres that are connectable, automated or equipped with power or energy metering devices and that comply with IEC TR 63196 Low-Voltage Switchgear and Control gear and their assemblies – Energy efficiency;

(ii)  Home and Building Electronic Systems (HBES), as referred to in EN IEC 63044 series, where the products and systems are needed to measure, control and reduce energy consumption;

(iii)  technologies that enable to increase the energy efficiency of low voltage installations, recognised under HD 60364-8-1: Low-voltage electrical installations – Part 8-1: Energy efficiency and HD 60364-8-82: Low-voltage electrical installations – Part 8-82: Functional aspects – Prosumer’s low-voltage electrical installations, including energy and power meters, external customer display, power compensation, phase compensation and filtering and efficient electric motor-driven systems;

(d)  high and medium voltage switchgears and control gears that increase the controllability of the electricity system, are integrated to increase the proportion of renewable energy or improve energy efficiency.

The equipment referred to in this point (d) complies with EN 62271-1 High-voltage switchgear and control gear – Part 1: Common specifications for alternating current switchgear and control gear and EN 62271-200 High-voltage switchgear and control gear – Part 200: AC metal-enclosed switchgear and control gear for rated voltages above 1 kV and up to and including 52 kV or with EN 62271-203 High-voltage switchgear and control gear – Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52kV;

(e)  demand response and load shifting equipment, systems and services that increase the flexibility of the electricity system and support grid stability, that include:

(i)  solutions to carry information to users for remotely acting on supply or consumption, including customer data hubs;

(ii)  automated control centres for load management and their core components (switchboards, contactors, relays, circuit breakers, automatic transfer switches).

Core components are installed as part of control centres;

(iii)  where not included in Section 8.2., advanced software and analytics to maximise efficiency and automation of electricity networks or integration of decentralised energy resources, at the level of the electricity grid or an industry, that include:

(a)  advanced control rooms, automation of electrical substations, voltage control capabilities;

(b)  operation software enabling operators to simulate the operation of grids for the purpose of ensuring grid stability, managing Distributed Energy Resources or improving grid performance.

The software supports dynamic grid characteristics required for the transition towards renewable energy. It is capable of processing data from near-real time grid measurements to observe how the power transmission, distribution and consumption really occur, and use this information to improve simulation studies and operation activities, including the avoidance of outages, black-outs, and wastes;

(iv)  where not included in Section 8.2., software supporting the design and planning of new grids or grid upgrades.

The software supports dynamic grid characteristics required for the transition towards renewable energy, including volatile power generation at distribution level (‘prosumers’), changing of power flow directions, and the use of grid storage units;

(v)  meteorological sensors for forecasting renewable electricity production;

(vi)  stand-alone or embedded connectable controllers and relays that enable an efficient use of electrical sources and loads;

(vii)  load-shedding and load-shifting equipment for load management and source-switching equipment, where the equipment is compliant with EN IEC 62962:2019 Particular requirements for load-shedding equipment;

(f)  where not included in Section 8.2., communication systems, software and control equipment, products, systems and services for energy efficiency or integration of renewable energy:

(i)  equipment to allow for exchange specifically of renewable electricity between users;

(ii)  battery swapping technology or service, supporting the electrification of transport;

(iii)  microgrid management systems;

(iv)  energy or power management systems, energy or power controls systems and SCADA systems for power management;

(v)  contactors, motor starters and motor controls that are connectable or automated and enable remote or automated control of electricity consumption and optimisation of load variation;

(vi)  variable speed drives and other variable speed drive solutions, excluding soft starters, that enable energy efficiency in electrical motor applications, where the equipment is compliant with EN 61800-9-1: Adjustable speed electrical power drive systems – Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications – General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM) and EN 61800-9-2: Adjustable speed electrical power drive systems – Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications – Energy efficiency indicators for power drive systems and motor starters;

(vii)  low-voltage electrical motors with an energy efficiency class (according to EN 60034-30-1: Rotating electrical machines – Part 30-1: Efficiency classes of line operated AC motors (IE code)) exceeding the requirements set by Commission Regulation (EU) 2019/1781 (2), specifically:

(a)  single-phase motors with a rated output of 0,12 kW or higher and an efficiency class of IE3 or higher;

(b)  Ex eb increased safety motors with a rated output between 0,12 kW and 1 000 kW, with 2, 4, 6 or 8 poles and an efficiency class IE3 or higher;

(c)  3-phase motors with a rated output between 0,75 kW and 1 000 kW, with 2, 4, 6 or 8 poles, which are not Ex eb increased safety motors and have (i) an efficiency class of IE5 for motors with 2,4 or 6 poles and a rated power between 75 kW and 200 kW, (ii) an efficiency class of IE 4 or higher for all other motors;

(d)  3-phase motors with a rated output between 0,12 kW and 0,75 kW, with 2, 4, 6 or 8 poles, which are not Ex eb increased safety motors and have an efficiency class of IE3 or higher;

(e)  3-phase VSD only motors with a rated output between 0,75 kW and 1 000 kW with 2, 4, 6 or 8 poles, classified according to the EN IEC TS 60034-30-2 and an efficiency class IE5;

(viii)  medium- and high-voltage motors with a rated power above 1 000 kW and an energy efficiency class IE 4 or higher according to draft standard IEC 60034-30-3.

2.  The following elements are not compliant:

(a)  infrastructure dedicated to creating a direct connection or expanding an existing direct connection between a substation or network and a power production plant that is more greenhouse gas intensive than 100 g CO2e/kWh measured on a life cycle basis. That exclusion only applies to equipment that is directly used to connect, or reinforce the connection to, a power production plant that is more greenhouse gas intensive than 100 g CO2e/kWh measured on a life cycle basis;

(b)  products, equipment, systems and software that are installed in an infrastructure dedicated to the extraction, transport, distribution, storage, manufacturing or transformation of fossil fuels.

3.  Switchgears with insulating or breaking medium using, or whose functioning relies on gases with a Global Warming Potential above 10 are not compliant.

For all power ranges, switchgears containing SF6 are not compliant.

4.  All products, equipment and systems comply with mandatory energy and material efficiency performance requirements laid down in Directive 2009/125/EC of the European Parliament and of the Council (3). Manufacturers refer to the latest applicable performance requirements in the Union.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The activity assesses the availability of and, where feasible, adopts techniques that support:

(a)  reuse and use of secondary raw materials and reused components in products manufactured;

(b)  design for high durability, recyclability, easy disassembly and adaptability of products manufactured;

(c)  waste management that prioritises recycling over disposal in the manufacturing process;

(d)  information on and traceability of substances of concern throughout the life cycle of the manufactured products.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Commission Regulation (EU) No 548/2014 of 21 May 2014 on implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to small, medium and large power transformers (OJ L 152, 22.5.2014, p. 1).

(2)   

Commission Regulation (EU) 2019/1781 of 1 October 2019 laying down ecodesign requirements for electric motors and variable speed drives pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Regulation (EC) No 641/2009 with regard to ecodesign requirements for glandless standalone circulators and glandless circulators integrated in products and repealing Commission Regulation (EC) No 640/2009 (OJ L 272, 25.10.2019, p. 74).

(3)   

Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products (recast) (OJ L 285, 31.10.2009, p. 10).

3.21.    Manufacturing of aircraft

Description of the activity

Manufacture, repair, maintenance, overhaul, retrofitting, design, repurposing and upgrade of aircraft and aircraft parts and equipment ( 21 ).

The economic activities in this category could be associated with a NACE code, in particular C30.3 and C33.16, in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Where an economic activity in this category does not fulfil the substantial contribution criterion specified in point (a) of this Section, the activity is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852, provided it complies with the remaining technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity manufactures, repairs, maintains, overhauls, retrofits, designs, repurposes or upgrades one of the following:

(a)  the aircraft with zero direct (tailpipe) CO2 emissions;

(b)  until 31 December 2027, the aircraft, other than produced for private or commercial business aviation, meeting the margins specified below and limited by the replacement ratio to ensure that the delivery does not increase the worldwide fleet number:

(i)  having maximum take-off mass greater than 5,7 t and less than or equal to 60 t and a certified metric value of CO2 emissions of at least 11 % less than the New Type limit of the International Civil Aviation Organization (ICAO) standard (1);

(ii)  having a maximum take-off mass greater than 60 t and less than or equal to 150 t and a certified metric value of CO2 emissions of at least 2 % less than the New Type limit of the ICAO standard;

(iii)  having a maximum take-off mass greater than 150 t and a certified metric value of CO2 emissions of at least 1,5 % less than the New Type limit of the ICAO standard.

The share of Taxonomy compliance of eligible aircraft shall be limited by the replacement ratio. The replacement ratio shall be calculated based on the proportion of aircraft permanently withdrawn from use to aircraft delivered at the global level averaged over the preceding 10 years as evidenced by verified data available from independent data providers.

In the absence of a certificate on the metric values of CO2 emissions confirming the required margin to the New Type limit of the ICAO standard, the aircraft manufacturer shall deliver a declaration that the aircraft meets the required level of performance and margins of improvement with the condition that the aircraft is certified by 11 December 2026;

(c)  from 1 January 2028 to 31 December 2032, the aircraft meeting the technical screening criteria set out in point (b) of this subsection that is certified to operate on 100 % blend of sustainable aviation fuels.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The activity assesses the availability of and, where feasible, adopts techniques that support:

(a)  reuse and use of secondary raw materials and re-used components in products manufactured;

(b)  design for high durability, recyclability, easy disassembly and adaptability of products manufactured;

(c)  waste management that prioritises recycling over disposal in the manufacturing process;

(d)  information on and traceability of substances of concern throughout the life cycle of the manufactured products.

Measures are in place to manage and recycle waste at the end-of life, including through decommissioning contractual agreements with recycling service providers, reflection in financial projections or official project documentation. These measures ensure that components and materials are segregated and treated to maximise recycling and reuse in accordance with the waste hierarchy, EU waste regulation principles and applicable regulations, in particular through the reuse and recycling of batteries and electronics and the critical raw materials therein. These measures also include the control and management of hazardous materials.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

The aircraft complies with Article 9(2) of Regulation (EU) 2018/1139.

The aircraft referred to in points (b) and (c) of this Section complies with the following standards:

(a)  amendment 13 of Volume I (noise), Chapter 14 of Annex 16 to the Chicago Convention, where the sum of the differences at all three measurement points between the maximum noise levels and the maximum permitted noise levels specified in 14.4.1.1, 14.4.1.2 and 14.4.1.3, shall not be less than 22 EPNdB;

(b)  amendment 10 of Volume II (engine emissions), Chapters 2 and 4, of Annex 16 to the Chicago Convention.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Volume 3 (CO2 emissions) of the environmental protection standard of the International Civil Aviation Organization (ICAO) contained in Annex 16 to the Chicago Convention, first edition.

▼B

4.   ENERGY

4.1.    Electricity generation using solar photovoltaic technology

Description of the activity

Construction or operation of electricity generation facilities that produce electricity using solar photovoltaic (PV) technology.

Where an economic activity is an integral element of the ‘Installation, maintenance and repair of renewable energy technologies’ as referred to in Section 7.6 of this Annex, the technical screening criteria specified in Section 7.6 apply.

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and F42.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity generates electricity using solar PV technology.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

The activity assesses availability of and, where feasible, uses equipment and components of high durability and recyclability and that are easy to dismantle and refurbish.

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

4.2.    Electricity generation using concentrated solar power (CSP) technology

Description of the activity

Construction or operation of electricity generation facilities that produce electricity using concentrated solar power (CSP) technology.

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and F42.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity generates electricity using CSP technology.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The activity assesses availability of and, where feasible, uses equipment and components of high durability and recyclability and that are easy to dismantle and refurbish.

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

4.3.    Electricity generation from wind power

Description of the activity

Construction or operation of electricity generation facilities that produce electricity from wind power.

Where an economic activity is an integral element of the ‘Installation, maintenance and repair of renewable energy technologies’ as referred to in Section 7.6 of this Annex, the technical screening criteria specified in Section 7.6 apply.

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and F42.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity generates electricity from wind power.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

In case of construction of offshore wind, the activity does not hamper the achievement of good environmental status as set out in Directive 2008/56/EC of the European Parliament and of the Council (1), requiring that the appropriate measures are taken to prevent or mitigate impacts in relation to that Directive’s Descriptor 11 (Noise/Energy), laid down in Annex I to that Directive, and as set out in Commission Decision (EU) 2017/848 (2) in relation to the relevant criteria and methodological standards for that descriptor.

(4)  Transition to a circular economy

The activity assesses availability of and, where feasible, uses equipment and components of high durability and recyclability and that are easy to dismantle and refurbish.

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex (3).

In case of offshore wind, the activity does not hamper the achievement of good environmental status as set out in Directive 2008/56/EC, requiring that the appropriate measures are taken to prevent or mitigate impacts in relation to that Directive’s Descriptors 1 (biodiversity) and 6 (seabed integrity), laid down in Annex I to that Directive, and as set out in Decision (EU) 2017/848 in relation to the relevant criteria and methodological standards for those descriptors.

(1)   

Directive 2008/56/EC of the European Parliament and of the Council of 17 June 2008 establishing a framework for community action in the field of marine environmental policy (Marine Strategy Framework Directive) (OJ L 164, 25.6.2008, p. 19).

(2)   

Commission Decision (EU) 2017/848 of 17 May 2017 laying down criteria and methodological standards on good environmental status of marine waters and specifications and standardised methods for monitoring and assessment, and repealing Decision 2010/477/EU (OJ L 125, 18.5.2017, p. 43).

(3)   

Practical guidance for the implementation of this criterion is contained in the European Commission notice C(2020) 7730 final “Guidance document on wind energy developments and EU nature legislation”, (version of 4.6.2021: https://ec.europa.eu/environment/nature/natura2000/management/docs/wind_farms_en.pdf).

4.4.    Electricity generation from ocean energy technologies

Description of the activity

Construction or operation of electricity generation facilities that produce electricity from ocean energy.

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and F42.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity generates electricity from ocean energy.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity does not hamper the achievement of good environmental status, as set out in Directive 2008/56/EC, requiring that the appropriate measures are taken to prevent or mitigate impacts in relation to that Directive’s Descriptor 11 (Noise/Energy), laid down in Annex I to that Directive, and as set out in Decision (EU) 2017/848 in relation to the relevant criteria and methodological standards for that descriptor.

(4)  Transition to a circular economy

The activity assesses availability of and, where feasible, uses equipment and components of high durability and recyclability and that are easy to dismantle and refurbish.

▼M2

(5)  Pollution prevention and control

Measures are in place to minimise toxicity of anti-fouling paint and biocides as laid down in Regulation (EU) No 528/2012 of the European Parliament and of the Council (1).

▼B

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

The activity does not hamper the achievement of good environmental status, as set out in Directive 2008/56/EC, requiring that the appropriate measures are taken to prevent or mitigate impacts in relation to that Directive’s Descriptor 1 (biodiversity), laid down in Annex I to that Directive, and as set out in Decision (EU) 2017/848 in relation to the relevant criteria and methodological standards for that descriptor.

(1)   

Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products (OJ L 167, 27.6.2012, p. 1).

4.5.    Electricity generation from hydropower

Description of the activity

Construction or operation of electricity generation facilities that produce electricity from hydropower.

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and F42.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity complies with either of the following criteria:

(a)  the electricity generation facility is a run-of-river plant and does not have an artificial reservoir;

(b)  the power density of the electricity generation facility is above 5 W/m2;

(c)  the life-cycle GHG emissions from the generation of electricity from hydropower, are lower than 100 g CO2e/kWh. The life-cycle GHG emissions are calculated using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 (1), ISO 14064-1:2018 (2) or the G-res tool (3). Quantified life-cycle GHG emissions are verified by an independent third party.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

1.  The activity complies with the provisions of Directive 2000/60/EC, in particular with all the requirements laid down in Article 4 of the Directive.

2.  For operation of existing hydropower plants, including refurbishment activities to enhance renewable energy or energy storage potential, the activity complies with the following criteria:

2.1.  In accordance with Directive 2000/60/EC and in particular Articles 4 and 11 of that Directive, all technically feasible and ecologically relevant mitigation measures have been implemented to reduce adverse impacts on water as well as on protected habitats and species directly dependent on water.

2.2.  Measures include, where relevant and depending on the ecosystems naturally present in the affected water bodies:

(a)  measures to ensure downstream and upstream fish migration (such as fish friendly turbines, fish guidance structures, state-of-the-art fully functional fish passes, measures to stop or minimise operation and discharges during migration or spawning);

(b)  measures to ensure minimum ecological flow (including mitigation of rapid, short-term variations in flow or hydro-peaking operations) and sediment flow;

(c)  measures to protect or enhance habitats.

2.3.  The effectiveness of those measures is monitored in the context of the authorisation or permit setting out the conditions aimed at achieving good status or potential of the affected water body.

3.  For construction of new hydropower plants, the activity complies with the following criteria:

3.1.  In accordance with Article 4 of Directive 2000/60/EC and in particular paragraph 7 of that Article, prior to construction, an impact assessment of the project is carried out to assess all its potential impacts on the status of water bodies within the same river basin and on protected habitats and species directly dependent on water, considering in particular migration corridors, free-flowing rivers or ecosystems close to undisturbed conditions.

The assessment is based on recent, comprehensive and accurate data, including monitoring data on biological quality elements that are specifically sensitive to hydromorphological alterations, and on the expected status of the water body as a result of the new activities, as compared to its current one.

It assesses in particular the cumulated impacts of this new project with other existing or planned infrastructure in the river basin.

3.2.  On the basis of that impact assessment, it has been established that the plant is conceived, by design and location and by mitigation measures, so that it complies with one of the following requirements:

(a)  the plant does not entail any deterioration nor compromises the achievement of good status or potential of the specific water body it relates to;

(b)  where the plant risks to deteriorate or compromise the achievement of good status/potential of the specific water body it relates to, such deterioration is not significant, and is justified by a detailed cost-benefit assessment demonstrating both of the following:

(i)  the reasons of overriding public interest or the fact that benefits expected from the planned hydropower plant outweigh the costs from deteriorating the status of water that are accruing to the environment and to society;

(ii)  the fact that the overriding public interest or the benefits expected from the plant cannot, for reasons of technical feasibility or disproportionate cost, be achieved by alternative means that would lead to a better environmental outcome (such as refurbishing of existing hydropower plants or use of technologies not disrupting river continuity).

3.3.  All technically feasible and ecologically relevant mitigation measures are implemented to reduce adverse impacts on water as well as on protected habitats and species directly dependent on water.

Mitigation measures include, where relevant and depending on the ecosystems naturally present in the affected water bodies:

(a)  measures to ensure downstream and upstream fish migration (such as fish friendly turbines, fish guidance structures, state-of the-art fully functional fish passes, measures to stop or minimise operation and discharges during migration or spawning);

(b)  measures to ensure minimum ecological flow (including mitigation of rapid, short-term variations in flow or hydro-peaking operations) and sediment flow;

(c)  measures to protect or enhance habitats.

The effectiveness of those measures is monitored in the context of the authorisation or permit setting out the conditions aimed at achieving good status or potential of the affected water body.

3.4.  The plant does not permanently compromise the achievement of good status/potential in any of the water bodies in the same river basin district.

3.5.  In addition to the mitigation measures referred to above, and where relevant, compensatory measures are implemented to ensure that the project does not increase the fragmentation of water bodies in the same river basin district. This is achieved by restoring continuity within the same river basin district to an extent that compensates the disruption of continuity, which the planned hydropower plant may cause. Compensation starts prior to the execution of the project.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex (4).

(1)   

ISO standard 14067:2018, Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification (version of 4.6.2021: https://www.iso.org/standard/71206.html).

(2)   

ISO standard 14064-1:2018, Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (version of 4.6.2021: https://www.iso.org/standard/66453.html).

(3)   

Publicly available online tool developed by the International Hydropower Association (IHA) in collaboration with the UNESCO Chair for Global Environmental Change (version of 4.6.2021: https://www.hydropower.org/gres).

(4)   

Practical guidance is contained in Commission notice C/2018/2619 ‘Guidance document on the requirements for hydropower in relation to EU nature legislation’ (OJ C 213, 18.6.2018, p. 1).

4.6.    Electricity generation from geothermal energy

Description of the activity

Construction or operation of electricity generation facilities that produce electricity from geothermal energy.

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and F42.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

Life-cycle GHG emissions from the generation of electricity from geothermal energy are lower than 100 g CO2e/kWh. Life-cycle GHG emission savings are calculated using Commission Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 or ISO 14064-1:2018. Quantified life-cycle GHG emissions are verified by an independent third party.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

For the operation of high-enthalpy geothermal energy systems, adequate abatement systems are in place to reduce emission levels in order not to hamper the achievement of air quality limit values set out in Directive 2004/107/EC of the European Parliament and of the Council (1) and Directive 2008/50/EC of the European Parliament and of the Council (2).

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Directive 2004/107/EC of the European Parliament and of the Council of 15 December 2004 relating to arsenic, cadmium, mercury, nickel and polycyclic aromatic hydrocarbons in ambient air (OJ L 23, 26.1.2005, p. 3).

(2)   

Directive 2008/50/EC of the European Parliament and of the Council of 21 May 2008 on ambient air quality and cleaner air for Europe (OJ L 152, 11.6.2008, p. 1).

4.7.    Electricity generation from renewable non-fossil gaseous and liquid fuels

Description of the activity

Construction or operation of electricity generation facilities that produce electricity using gaseous and liquid fuels of renewable origin. This activity does not include electricity generation from the exclusive use of biogas and bio-liquid fuels (see Section 4.8 of this Annex).

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and F42.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Life-cycle GHG emissions from the generation of electricity using renewable gaseous and liquid fuels are lower than 100 g CO2e/kWh.

Life-cycle GHG emissions are calculated based on project-specific data, where available, using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 (1) or ISO 14064-1:2018 (2).

Quantified life-cycle GHG emissions are verified by an independent third party.

2.  Where facilities incorporate any form of abatement (including carbon capture or use of decarbonised fuels), that abatement activity complies with the criteria set out in the relevant Section of this Annex, where applicable.

Where the CO2 that would otherwise be emitted from the electricity generation process is captured for the purpose of underground storage, the CO2 is transported and stored underground, in accordance with the technical screening criteria set out in Sections 5.11 and 5.12 of this Annex.

3.  The activity meets either of the following criteria:

(a)  at construction, measurement equipment for monitoring of physical emissions, such as methane leakage is installed or a leak detection and repair program is introduced;

(b)  at operation, physical measurement of methane emissions are reported and leak is eliminated.

4.  Where the activity blends renewable gaseous or liquid fuels with biogas or bioliquids, the agricultural biomass used for the production of the biogas or bioliquids complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001 while forest biomass complies with the criteria laid down in Article 29, paragraphs 6 and 7, of that Directive.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for large combustion plants (3). No significant cross-media effects occur.

For combustion plants with thermal input greater than 1 MW but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193 of the European Parliament and of the Council (4).

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

ISO standard 14067:2018, Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification (version of 4.6.2021: https://www.iso.org/standard/71206.html).

(2)   

ISO standard 14064-1:2018, Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (version of 4.6.2021: https://www.iso.org/standard/66453.html).

(3)   

Commission Implementing Decision (EU) 2017/1442 of 31 July 2017 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for large combustion plants (OJ L 212, 17.8.2017, p. 1).

(4)   

Directive (EU) 2015/2193 of the European Parliament and of the Council of 25 November 2015 on the limitation of emissions of certain pollutants into the air from medium combustion plants (OJ L 313, 28.11.2015, p. 1).

4.8.    Electricity generation from bioenergy

Description of the activity

Construction and operation of electricity generation installations that produce electricity exclusively from biomass, biogas or bioliquids, excluding electricity generation from blending of renewable fuels with biogas or bioliquids (see Section 4.7 of this Annex).

The economic activities in this category could be associated with NACE code D35.11 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Agricultural biomass used in the activity complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001. Forest biomass used in the activity complies with the criteria laid down in Article 29, paragraphs 6 and 7, of that Directive.

2.  The greenhouse gas emission savings from the use of biomass are at least 80 % in relation to the GHG saving methodology and the relative fossil fuel comparator set out in Annex VI to Directive (EU) 2018/2001.

3.  Where the installations rely on anaerobic digestion of organic material, the production of the digestate meets the criteria in Sections 5.6 and criteria 1 and 2 of Section 5.7 of this Annex, as applicable.

4.  Points 1 and 2 do not apply to electricity generation installations with a total rated thermal input below 2 MW and using gaseous biomass fuels.

5.  For electricity generation installations with a total rated thermal input from 50 to 100 MW, the activity applies high-efficiency cogeneration technology, or, for electricity-only installations, the activity meets an energy efficiency level associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for large combustion plants (1).

6.  For electricity generation installations with a total rated thermal input above 100 MW, the activity complies with one or more of the following criteria:

(a)  attains electrical efficiency of at least 36 %;

(b)  applies highly efficient CHP (combined heat and power) technology as referred to in Directive 2012/27/EU of the European Parliament and of the Council (2);

(c)  uses carbon capture and storage technology. Where the CO2 that would otherwise be emitted from the electricity generation process is captured for the purpose of underground storage, the CO2 is transported and stored underground in accordance with the technical screening criteria set out in Sections 5.11 and 5.12, respectively, of this Annex.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

For installations falling within the scope of Directive 2010/75/EU of the European Parliament and of the Council (3), emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for large combustion plants (4). No significant cross-media effects occur.

For combustion plants with thermal input greater than 1 MW but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

For plants in zones or parts of zones not complying with the air quality limit values laid down in Directive 2008/50/EC, measures are implemented to reduce emission levels taking into account the results of the information exchange (5) which are published by the Commission in accordance with Article 6, paragraphs 9 and 10, of Directive (EU) 2015/2193.

For anaerobic digestion of organic material, where the produced digestate is used as fertiliser or soil improver, either directly or after composting or any other treatment, it meets the requirements for fertilising materials set out in Component Material Categories (CMC) 4 and 5 in Annex II to Regulation (EU) 2019/1009 or national rules on fertilisers or soil improvers for agricultural use.

For anaerobic digestion plants treating over 100 tonnes per day, emissions to air and water are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set for anaerobic treatment of waste in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for waste treatment (6). No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Implementing Decision (EU) 2017/1442.

(2)   

Directive 2012/27/EU of the European Parliament and of the Council of 25 October 2012 on energy efficiency, amending Directives 2009/125/EC and 2010/30/EU and repealing Directives 2004/8/EC and 2006/32/EC (OJ L 315, 14.11.2012, p. 1).

(3)   

Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control) (OJ L 334, 17.12.2010, p. 17).

(4)   

Implementing Decision (EU) 2017/1442.

(5)   

The final technology report resulting from the exchange of information with Member States, the industries concerned and non-governmental organisations contains technical information on best available technologies used in medium combustion plants to reduce their environmental impacts, and on the emission levels achievable with best available and emerging technologies and the related costs (version of 4.6.2021: https://circabc.europa.eu/ui/group/06f33a94-9829-4eee-b187-21bb783a0fbf/library/9a99a632-9ba8-4cc0-9679-08d929afda59/details).

(6)   

Commission Implementing Decision (EU) 2018/1147 of 10 August 2018 establishing best available techniques (BAT) conclusions for waste treatment, under Directive 2010/75/EU of the European Parliament and of the Council (OJ L 208, 17.8.2018, p. 38).

4.9.    Transmission and distribution of electricity

Description of the activity

Construction and operation of transmission systems that transport the electricity on the extra high-voltage and high-voltage interconnected system.

Construction and operation of distribution systems that transport electricity on high-voltage, medium-voltage and low-voltage distribution systems.

The economic activities in this category could be associated with several NACE codes, in particular D35.12 and D35.13 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity complies with one of the following criteria:

1.  The transmission and distribution infrastructure or equipment is in an electricity system that complies with at least one of the following criteria:

(a)  the system is the interconnected European system, i.e. the interconnected control areas of Member States, Norway, Switzerland and the United Kingdom, and its subordinated systems;

(b)  more than 67 % of newly enabled generation capacity in the system is below the generation threshold value of 100 g CO2e/kWh measured on a life cycle basis in accordance with electricity generation criteria, over a rolling five-year period;

(c)  the average system grid emissions factor, calculated as the total annual emissions from power generation connected to the system, divided by the total annual net electricity production in that system, is below the threshold value of 100 g CO2e/kWh measured on a life cycle basis in accordance with electricity generation criteria, over a rolling five-year period;

Infrastructure dedicated to creating a direct connection or expanding an existing direct connection between a substation or network and a power production plant that is more greenhouse gas intensive than 100 g CO2e/kWh measured on a life cycle basis is not compliant.

Installation of metering infrastructure that does not meet the requirements of smart metering systems of Article 20 of Directive (EU) 2019/944 is not compliant.

2.  The activity is one of the following:

(a)  construction and operation of direct connection, or expansion of existing direct connection, of low carbon electricity generation below the threshold of 100 g CO2e/kWh measured on a life cycle basis to a substation or network;
(b)  construction and operation of electric vehicle (EV) charging stations and supporting electric infrastructure for the electrification of transport, subject to compliance with the technical screening criteria under the transport Section of this Annex; ►M2  
(c)  installation of transmission and distribution transformers that comply with the Tier 2 (1 July 2021) requirements set out in Annex I to Commission Regulation (EU) No 548/2014 and, for medium power transformers with highest voltage for equipment not exceeding 36 kV, with AA0 level requirements on no-load losses set out in standard EN 50588-1 (1);  ◄
(d)  construction/installation and operation of equipment and infrastructure where the main objective is an increase of the generation or use of renewable electricity generation;
(e)  installation of equipment to increase the controllability and observability of the electricity system and to enable the development and integration of renewable energy sources, including:
(i)  sensors and measurement tools (including meteorological sensors for forecasting renewable production);
(ii)  communication and control (including advanced software and control rooms, automation of substations or feeders, and voltage control capabilities to adapt to more decentralised renewable infeed).
(f)  installation of equipment such as, but not limited to future smart metering systems or those replacing smart metering systems in line with Article 19(6) of Directive (EU) 2019/944 of the European Parliament and of the Council (2), which meet the requirements of Article 20 of Directive (EU) 2019/944, able to carry information to users for remotely acting on consumption, including customer data hubs;
(g)  construction/installation of equipment to allow for exchange of specifically renewable electricity between users;
(h)  construction and operation of interconnectors between transmission systems, provided that one of the systems is compliant.

For the purposes of this Section, the following specifications apply:

(a)  the rolling five-year period used in determining compliance with the thresholds is based on five consecutive historical years, including the year for which the most recent data are available;

(b)  a ‘system’ means the power control area of the transmission or distribution network where the infrastructure or equipment is installed;

(c)  transmission systems may include generation capacity connected to subordinated distribution systems;

(d)  distribution systems subordinated to a transmission system that is deemed to be on a trajectory to full decarbonisation may also be deemed to be on a trajectory to full decarbonisation;

(e)  to determine compliance, it is possible to consider a system covering multiple control areas which are interconnected and with significant energy exchanges between them, in which case the weighted average emissions factor across all included control areas is used, and individual subordinated transmission or distribution systems within that system is not required to demonstrate compliance separately;

(f)  it is possible for a system to become non-compliant after having previously been compliant. In systems that become non-compliant, no new transmission and distribution activities are compliant from that moment onward, until the system complies again with the threshold (except for those activities that are always compliant, see above). Activities in subordinated systems may still be compliant, where those subordinated systems meet the criteria of this Section;

(g)  a direct connection or expansion of an existing direct connection to production plants includes infrastructure that is indispensable to carry the associated electricity from the power generating facility to a substation or to the network.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

A waste management plan is in place and ensures maximal reuse or recycling at end of life in accordance with the waste hierarchy, including through contractual agreements with waste management partners, reflection in financial projections or official project documentation.

(5)  Pollution prevention and control

Overground high voltage lines:

(a)  for construction site activities, activities follow the principles of the IFC General Environmental, Health, and Safety Guidelines (3).

(b)  activities respect applicable norms and regulations to limit impact of electromagnetic radiation on human health, including for activities carried out in the Union, the Council recommendation on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) (4) and for activities carried out in third countries, the 1998 Guidelines of International Commission on Non-Ionizing Radiation Protection (ICNIRP) (5).

Activities do not use PCBs polyclorinated biphenyls.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex (6).

(1)   

CEI EN 50588-1 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV.

(2)   

Directive (EU) 2019/944 of the European Parliament and of the Council of 5 June 2019 on rules for the internal market for electricity and amending Directive 2012/27/EU (OJ L 158, 14.6.2019, p. 125),

(3)   

Environmental, Health, and Safety (EHS) Guidelines of 30 April 2007 (version of 4.6.2021: https://www.ifc.org/wps/wcm/connect/29f5137d-6e17-4660-b1f9-02bf561935e5/Final%2B-%2BGeneral%2BEHS%2BGuidelines.pdf?MOD=AJPERES&CVID=jOWim3p).

(4)   

Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) (1999/519/EC) (OJ L 199, 30.7.1999, p. 59).

(5)   

ICNIRP 1998 Guidelines for limiting exposure to time-varying electric, magnetic and electromagnetic fields (up to 300 ghz) (version of 4.6.2021: https://www.icnirp.org/cms/upload/publications/ICNIRPemfgdl.pdf).

(6)   

Practical guidance for the implementation of this criterion is contained in the European Commission notice C(2018)2620 “Energy transmission infrastructure and EU nature legislation” (OJ C 213, 18.6.2018, p. 62).

4.10.    Storage of electricity

Description of the activity

Construction and operation of facilities that store electricity and return it at a later time in the form of electricity. The activity includes pumped hydropower storage.

Where an economic activity is an integral element of the ‘Installation, maintenance and repair of renewable energy technologies’ as referred to in Section 7.6 of this Annex, the technical screening criteria specified in Section 7.6 apply.

The economic activities in this category have no dedicated NACE code as referred to in the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity is the construction and operation of electricity storage including pumped hydropower storage.

Where the activity includes chemical energy storage, the medium of storage (such as hydrogen or ammonia) complies with the criteria for manufacturing of the corresponding product specified in Sections 3.7 to 3.17 of this Annex. In case of using hydrogen as electricity storage, where hydrogen meets the technical screening criteria specified in Section 3.10 of this Annex, re-electrification of hydrogen is also considered part of the activity.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

In case of pumped hydropower storage not connected to a river body, the activity complies with the criteria set out in Appendix B to this Annex.

In case of pumped hydropower storage connected to a river body, the activity complies with the criteria for DNSH to sustainable use and protection of water and marine resources specified in Section 4.5 (Electricity production from hydropower).

(4)  Transition to a circular economy

A waste management plan is in place and ensures maximal reuse or recycling at end of life in accordance with the waste hierarchy, including through contractual agreements with waste management partners, reflection in financial projections or official project documentation.

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

4.11.    Storage of thermal energy

Description of the activity

Construction and operation of facilities that store thermal energy and return it at a later time in the form of thermal energy or other energy vectors.

Where an economic activity is an integral element of the ‘Installation, maintenance and repair of renewable energy technologies’ as referred to in Section 7.6 of this Annex, the technical screening criteria specified in Section 7.6 apply.

The economic activities in this category have no dedicated NACE code as referred to in the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity stores thermal energy, including Underground Thermal Energy Storage (UTES) or Aquifer Thermal Energy Storage (ATES).

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

For Aquifer Thermal Energy Storage, the activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

A waste management plan is in place and ensures maximal reuse, remanufacturing or recycling at end of life, including through contractual agreements with waste management partners, reflection in financial projections or official project documentation.

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

4.12.    Storage of hydrogen

Description of the activity

Construction and operation of facilities that store hydrogen and return it at a later time.

The economic activities in this category have no dedicated NACE code in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity is one of the following:

(a)  construction of hydrogen storage facilities;

(b)  conversion of existing underground gas storage facilities into storage facilities dedicated to hydrogen-storage;

(c)  operation of hydrogen storage facilities where the hydrogen stored in the facility meets the criteria for manufacture of hydrogen set out in Section 3.10. of this Annex.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

A waste management plan is in place and ensures maximal reuse, remanufacturing or recycling at end of life, including through contractual agreements with waste management partners, reflection in financial projections or official project documentation.

(5)  Pollution prevention and control

In the case of storage above five tonnes, the activity complies with Directive 2012/18/EU of the European Parliament and of the Council (1).

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Directive 2012/18/EU of the European Parliament and of the Council of 4 July 2012 on the control of major-accident hazards involving dangerous substances, amending and subsequently repealing Council Directive 96/82/EC (OJ L 197, 24.7.2012, p. 1).

4.13.    Manufacture of biogas and biofuels for use in transport and of bioliquids

Description of the activity

Manufacture of biogas or biofuels for use in transport and of bioliquids.

The economic activities in this category could be associated with NACE code D35.21 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Agricultural biomass used for the manufacture of biogas or biofuels for use in transport and for the manufacture of bioliquids complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001. Forest biomass used for the manufacture of biogas or biofuels for use in transport and for the manufacture of bioliquids complies with the criteria laid down in Article 29, paragraphs 6 and 7, of that Directive.

Food-and feed crops are not used for the manufacture of biofuels for use in transport and for the manufacture of bioliquids.

2.  The greenhouse gas emission savings from the manufacture of biofuels and biogas for use in transport and from the manufacture of bioliquids are at least 65 % in relation to the GHG saving methodology and the relative fossil fuel comparator set out in Annex V to Directive (EU) 2018/2001.

3.  Where the manufacture of biogas relies on anaerobic digestion of organic material, the production of the digestate meets the criteria in Sections 5.6 and criteria 1 and 2 of Section 5.7 of this Annex, as applicable.

4.  Where the CO2 that otherwise would be emitted from the manufacturing process is captured for the purpose of underground storage, the CO2 is transported and stored underground in accordance with the technical screening criteria set out in Sections 5.11 and 5.12 of this Annex.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

For biogas production, a gas-tight cover on the digestate storage is applied.

For anaerobic digestion plants treating over 100 tonnes per day, emissions to air and water are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set for anaerobic treatment of waste in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for waste treatment (1). No significant cross-media effects occur.

In case of anaerobic digestion of organic material, where the produced digestate is used as fertiliser or soil improver, either directly or after composting or any other treatment, it meets the requirements for fertilising materials set out in Component Material Categories (CMC) 4 and 5 for digestate or CMC 3 for compost, as applicable, in Annex II to Regulation EU 2019/1009 or national rules on fertilisers or soil improvers for agricultural use.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Implementing Decision (EU) 2018/1147.

4.14.    Transmission and distribution networks for renewable and low-carbon gases

Description of the activity

Conversion, repurposing or retrofit of gas networks for the transmission and distribution of renewable and low-carbon gases.

Construction or operation of transmission and distribution pipelines dedicated to the transport of hydrogen or other low-carbon gases.

The economic activities in this category could be associated with several NACE codes, in particular D35.22, F42.21 and H49.50 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The activity consists in one of the following:

(a)  construction or operation of new transmission and distribution networks dedicated to hydrogen or other low-carbon gases;

(b)  conversion/repurposing of existing natural gas networks to 100 % hydrogen;

(c)  retrofit of gas transmission and distribution networks that enables the integration of hydrogen and other low-carbon gases in the network, including any gas transmission or distribution network activity that enables the increase of the blend of hydrogen or other low carbon gasses in the gas system;

2.  The activity includes leak detection and repair of existing gas pipelines and other network elements to reduce methane leakage.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

Fans, compressors, pumps and other equipment used which is covered by Directive 2009/125/EC of the European Parliament and of the Council (1) comply, where relevant, with the top class requirements of the energy label, and with implementing regulations under that Directive and represent the best available technology.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products (OJ L 285, 31.10.2009, p. 10).

4.15.    District heating/cooling distribution

Description of the activity

Construction, refurbishment and operation of pipelines and associated infrastructure for distribution of heating and cooling, ending at the sub-station or heat exchanger.

The economic activities in this category could be associated with NACE code D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity complies with one of the following criteria:

(a)  for construction and operation of pipelines and associated infrastructure for distributing heating and cooling, the system meets the definition of efficient district heating and cooling systems laid down in Article 2, point 41, of Directive 2012/27/EU;

(b)  for refurbishment of pipelines and associated infrastructure for distributing heating and cooling, the investment that makes the system meet the definition of efficient district heating or cooling laid down in Article 2, point 41, of Directive 2012/27/EU starts within a three year period as underpinned by a contractual obligation or an equivalent in case of operators in charge of both generation and the network;

(c)  the activity is the following:

(i)  modification to lower temperature regimes;

(ii)  advanced pilot systems (control and energy management systems, Internet of Things).

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

Fans, compressors, pumps and other equipment used which is covered by Directive 2009/125/EC comply, where relevant, with the top class requirements of the energy label, and otherwise comply with implementing regulations under that Directive and represent the best available technology.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

4.16.    Installation and operation of electric heat pumps

Description of the activity

Installation and operation of electric heat pumps.

Where an economic activity is an integral element of ‘Installation, maintenance and repair of renewable energy technologies’ as referred to in Section 7.6 of this Annex, the technical screening criteria specified in Section 7.6 apply.

The economic activities in this category could be associated with several NACE codes, in particular D35.30 and F43.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The installation and operation of electric heat pumps complies with both of the following criteria:

(a)  refrigerant threshold: Global Warming Potential does not exceed 675;

(b)  energy efficiency requirements laid down in the implementing regulations (1) under Directive 2009/125/EC are met.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

The activity assesses availability of and, where feasible, uses equipment and components of high durability and recyclability and that are easy to dismantle and refurbish.

A waste management plan is in place and ensures maximal reuse, remanufacturing or recycling at end of life, including through contractual agreements with waste management partners, reflection in financial projections or official project documentation.

(5)  Pollution prevention and control

For air to air heat pumps with rated capacity of 12 kW or below, indoor and outdoor sound power levels are below the threshold set out in Commission Regulation (EU) No 206/2012 (2).

(6)  Protection and restoration of biodiversity and ecosystems

N/A

(1)   

Commission Regulation (EU) No 206/2012 of 6 March 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for air conditioners and comfort fans (OJ L 72, 10.3.2012, p. 7), Commission Regulation (EU) No 813/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for space heaters and combination heaters (OJ L 239, 6.9.2013, p. 136) and Commission Regulation (EU) 2016/2281 Commission Regulation (EU) 2016/2281 of 30 November 2016 implementing Directive 2009/125/EC of the European Parliament and of the Council establishing a framework for the setting of ecodesign requirements for energy-related products, with regard to ecodesign requirements for air heating products, cooling products, high temperature process chillers and fan coil units (OJ L 346, 20.12.2016, p. 1).

(2)   

Commission Regulation (EU) No 206/2012 of 6 March 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for air conditioners and comfort fans (OJ L 72, 10.3.2012, p. 7).

4.17.    Cogeneration of heat/cool and power from solar energy

Description of the activity

Construction and operation of facilities co-generating electricity and heat/cool from solar energy.

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity consists in the cogeneration (1) of electricity and heat/cool from solar energy.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

The activity assesses availability of and, where feasible, uses equipment and components of high durability and recyclability and that are easy to dismantle and refurbish.

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Cogeneration is defined in Article 2 point 30 of Directive 2012/27/EU.

4.18.    Cogeneration of heat/cool and power from geothermal energy

Description of the activity

Construction and operation of facilities co-generating heat/cool and power from geothermal energy.

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The life-cycle GHG emissions from the combined generation of heat/cool and power (1) from geothermal energy are lower than 100 g CO2e per 1 kWh of energy output from the combined generation.

Life-cycle GHG emissions are calculated based on project-specific data, where available, using Commission Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 or ISO 14064-1:2018.

Quantified life-cycle GHG emissions are verified by an independent third party.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

For the operation of high-enthalpy geothermal energy systems, adequate abatement systems are in place to reduce emission levels in order not to hamper the achievement of air quality limit values set out in Directives 2004/107/EC and 2008/50/EC.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Cogeneration is defined in Article 2 point 30 of Directive 2012/27/EU.

4.19.    Cogeneration of heat/cool and power from renewable non-fossil gaseous and liquid fuels

Description of the activity

Construction and operation of combined heat/cool and power generation facilities using gaseous and liquid fuels of renewable origin. This activity does not include cogeneration of heat/cool and power from the exclusive use of biogas and bio-liquid fuels (see Section 4.20 of this Annex)

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The life-cycle GHG emissions from the co-generation of heat/cool and power (1) from renewable gaseous and liquid fuels are lower than 100 g CO2e per 1 kWh of energy output from the co-generation.

Life-cycle GHG emissions are calculated based on project-specific data, where available, using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 (2) or ISO 14064-1:2018 (3).

Quantified life-cycle GHG emissions are verified by an independent third party.

2.  Where facilities incorporate any form of abatement (including carbon capture or use of decarbonised fuels) that abatement activity complies with the relevant Sections of this Annex, where applicable.

Where the CO2 that would otherwise be emitted from the cogeneration process is captured for the purpose of underground storage, the CO2 is transported and stored underground, in accordance with the technical screening criteria set out in Sections 5.11 and 5.12 of this Annex.

3.  The activity meets either of the following criteria:

(a)  at construction, measurement equipment for monitoring of physical emissions, such as methane leakage is installed or a leak detection and repair program is introduced;

(b)  at operation, physical measurement of methane emissions are reported and leak is eliminated.

4.  Where the activity blends renewable gaseous or liquid fuels with biogas or bioliquids, the agricultural biomass used for the production of the biogas or bioliquids complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001 while forest biomass complies with the criteria laid down in Article 29, paragraphs 6 and 7, of that Directive.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for large combustion plants (4). No significant cross-media effects occur.

For combustion plants with thermal input greater than 1 MW but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Cogeneration is defined in Article 2 point 30 of Directive 2012/27/EU.

(2)   

ISO standard 14067:2018, Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification (version of 4.6.2021: https://www.iso.org/standard/71206.html).

(3)   

ISO standard 14064-1:2018, Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (version of 4.6.2021: https://www.iso.org/standard/66453.html).

(4)   

Implementing Decision (EU) 2017/1442.

4.20.    Cogeneration of heat/cool and power from bioenergy

Description of the activity

Construction and operation of installations used for cogeneration of heat/cool and power exclusively from biomass, biogas or bioliquids, and excluding cogeneration from blending of renewable fuels with biogas or bioliquids (see Section 4.19 of this Annex).

The economic activities in this category could be associated with several NACE codes, in particular D35.11 and D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Agricultural biomass used in the activity complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001. Forest biomass used in the activity complies with the criteria laid down in Article 29, paragraphs 6 and 7 of that Directive.

2.  The greenhouse gas emission savings from the use of biomass in cogeneration installations are at least 80 % in relation to the GHG emission saving methodology and fossil fuel comparator set out in Annex VI to Directive (EU) 2018/2001.

3.  Where the cogeneration installations rely on anaerobic digestion of organic material, the production of the digestate meets the criteria in Sections 5.6 and criteria 1 and 2 of Section 5.7 of this Annex, as applicable.

4.  Points 1 and 2 do not apply to cogeneration installations with a total rated thermal input below 2 MW and using gaseous biomass fuels.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

For installations falling within the scope of Directive 2010/75/EU, emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for large combustion plants (1), ensuring at the same time that no significant cross-media effects occur.

For combustion plants with thermal input greater than 1 MW but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

For plants in zones or parts of zones not complying with the air quality limit values laid down in Directive 2008/50/EC, results of the information exchange (2), which are published by the Commission in accordance with Article 6, paragraphs 9 and 10, of Directive (EU) 2015/2193 are taken into account.

In case of anaerobic digestion of organic material, where the produced digestate is used as fertiliser or soil improver, either directly or after composting or any other treatment, it meets the requirements for fertilising materials set out in Component Material Categories (CMC) 4 and 5 in Annex II to Regulation (EU) 2019/1009 or national rules on fertilisers or soil improvers for agricultural use.

For anaerobic digestion plants treating over 100 tonnes per day, emissions to air and water are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set for anaerobic treatment of waste in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for waste treatment (3). No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Implementing Decision (EU) 2017/1442.

(2)   

The final technology report resulting from the exchange of information with Member States, the industries concerned and non-governmental organisations contains technical information on best available technologies used in medium combustion plants to reduce their environmental impacts, and on the emission levels achievable with best available and emerging technologies and the related costs (version of 4.6.2021: https://circabc.europa.eu/ui/group/06f33a94-9829-4eee-b187-21bb783a0fbf/library/9a99a632-9ba8-4cc0-9679-08d929afda59/details).

(3)   

Implementing Decision (EU) 2018/1147.

4.21.    Production of heat/cool from solar thermal heating

Description of the activity

Construction and operation of facilities producing heat/cool from solar thermal heating technology.

Where an economic activity is an integral element of the ‘Installation, maintenance and repair of renewable energy technologies’ as referred to in Section 7.6 of this Annex, the technical screening criteria specified in Section 7.6 apply.

The economic activities in this category could be associated with NACE code D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity produces heat/cool using solar thermal heating.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

The activity assesses availability of and, where feasible, uses equipment and components of high durability and recyclability and that are easy to dismantle and refurbish.

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

4.22.    Production of heat/cool from geothermal energy

Description of the activity

Construction or operation of facilities that produce heat/cool from geothermal energy.

The economic activities in this category could be associated with NACE code D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The life-cycle GHG emissions from the generation of heat/cool from geothermal energy are lower than 100 g CO2e/kWh.

Life-cycle GHG emissions are calculated based on project-specific data, where available, using Commission Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 or ISO 14064-1:2018.

Quantified life-cycle GHG emissions are verified by an independent third party.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

For the operation of high-enthalpy geothermal energy systems, adequate abatement systems are in place to reduce emission levels in order not to hamper the achievement of air quality limit values set out in Directives 2004/107/EC and 2008/50/EC.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

4.23.    Production of heat/cool from renewable non-fossil gaseous and liquid fuels

Description of the activity

Construction and operation of heat generation facilities that produce heat/cool using gaseous and liquid fuels of renewable origin. This activity does not include production of heat/cool from the exclusive use of biogas and bio-liquid fuels (see Section 4.24 of this Annex).

The economic activities in this category could be associated with NACE code D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The life-cycle GHG emissions from the generation of heat/cool using renewable gaseous and liquid fuels are lower than 100 g CO2e/kWh.

Life-cycle GHG emissions are calculated based on project-specific data, where available, using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 (1) or ISO 14064-1:2018 (2).

Quantified life-cycle GHG emissions are verified by an independent third party.

2.  Where facilities incorporate any form of abatement (including carbon capture or use of decarbonised fuels), that abatement activity complies with the relevant Sections of this Annex, where applicable.

Where the CO2 that would otherwise be emitted from the electricity generation process is captured for the purpose of underground storage, the CO2 is transported and stored underground, in accordance with the technical screening criteria set out in Sections 5.11 and 5.12 of this Annex.

3.  The activity meets either of the following criteria:

(a)  at construction, measurement equipment for monitoring physical emissions, such as methane leakage is installed or a leak detection and repair program is introduced;

(b)  at operation, physical measurement of methane emissions are reported and leak is eliminated.

4.  Where the activity blends renewable gaseous or liquid fuels with biogas or bioliquids, the agricultural biomass used for the production of the biogas or bioliquids complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001 while forest biomass complies with the criteria laid down in Article 29, paragraphs 6 and 7, of that Directive.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for large combustion plants (3). No significant cross-media effects occur.

For combustion plants with thermal input greater than 1 MW but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

ISO standard 14067:2018, Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification (version of 4.6.2021: https://www.iso.org/standard/71206.html).

(2)   

ISO standard 14064-1:2018, Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (version of 4.6.2021: https://www.iso.org/standard/66453.html).

(3)   

Implementing Decision (EU) 2017/1442.

4.24.    Production of heat/cool from bioenergy

Description of the activity

Construction and operation of facilities that produce heat/cool exclusively from biomass, biogas or bioliquids, and excluding production of heat/cool from blending of renewable fuels with biogas or bioliquids (see Section 4.23 of this Annex.

The economic activities in this category could be associated with NACE code D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Agricultural biomass used in the activity for the production of heat and cool complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001. Forest biomass used in the activity complies with the criteria laid down in Article 29, paragraphs 6 and 7, of that Directive.

2.  The greenhouse gas emission savings from the use of biomass are at least 80 % in relation to the GHG emission saving methodology and relative fossil fuel comparator set out in Annex VI to Directive (EU) 2018/2001.

3.  Where the installations rely on anaerobic digestion of organic material, the production of the digestate meets the criteria in Sections 5.6 and criteria 1 and 2 of Section 5.7 of this Annex, as applicable.

4.  Points 1 and 2 do not apply to heat generation installations with a total rated thermal input below 2 MW and using gaseous biomass fuels.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

For installations falling within the scope of Directive 2010/75/EU, emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for large combustion plants (1), ensuring at the same time that no significant cross-media effects occur.

For combustion plants with thermal input greater than 1 MW but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

For plants in zones or parts of zones not complying with the air quality limit values laid down in Directive 2008/50/EC, results of the information exchange (2), which are published by the Commission in accordance with Article 6, paragraphs 9 and 10 of Directive (EU) 2015/2193 are taken into account.

For anaerobic digestion of organic material, where the produced digestate is used as fertiliser or soil improver, either directly or after composting or any other treatment, it meets the requirements for fertilising materials set out in Component Material Categories (CMC) 4 and 5 in Annex II to Regulation (EU) 2019/1009 or national rules on fertilisers or soil improvers for agricultural use.

For anaerobic digestion plants treating over 100 tonnes per day, emissions to air and water are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set for anaerobic treatment of waste in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for waste treatment (3). No significant cross-media effects occur.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Implementing Decision (EU) 2017/1442.

(2)   

The final technology report resulting from the exchange of information with Member States, the industries concerned and non-governmental organisations contains technical information on best available technologies used in medium combustion plants to reduce their environmental impacts, and on the emission levels achievable with best available and emerging technologies and the related costs (version of 4.6.2021: https://circabc.europa.eu/ui/group/06f33a94-9829-4eee-b187-21bb783a0fbf/library/9a99a632-9ba8-4cc0-9679-08d929afda59/details).

(3)   

Implementing Decision (EU) 2018/1147.

4.25.    Production of heat/cool using waste heat

Description of the activity

Construction and operation of facilities that produce heat/cool using waste heat.

The economic activities in this category could be associated with NACE code D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity produces heat/cool from waste heat.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

The activity assesses availability of and, where feasible, uses equipment and components of high durability and recyclability and that are easy to dismantle and refurbish.

(5)  Pollution prevention and control

Pumps and the kind of equipment used, which is covered by Ecodesign and Energy labelling comply, where relevant, with the top class requirements of the energy label laid down in Regulation (EU) 2017/1369, and with implementing regulations under Directive 2009/125/EC and represent the best available technology.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

▼M1

4.26.    Pre-commercial stages of advanced technologies to produce energy from nuclear processes with minimal waste from the fuel cycle

Description of the activity

Research, development, demonstration and deployment of innovative electricity generation facilities, licenced by Member States’ competent authorities in accordance with applicable national law, that produce energy from nuclear processes with minimal waste from the fuel cycle.

The activity is classified under NACE code M72 and M72.1 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with all the technical screening criteria set out in this Section.

Technical screening criteria



General criteria pertaining to substantial contribution to climate change mitigation and Do no significant harm (‘DNSH’)

1. The project related to the economic activity (‘the project’) is located in a Member State which complies with all of the following:

(a) 

the Member State has fully transposed Council Directive 2009/71/Euratom ( 22 ) and Council Directive 2011/70/Euratom ( 23 );

(b) 

the Member State complies with the Treaty establishing the European Atomic Energy Community (‘Euratom Treaty’) and with legislation adopted on its basis, in particular, Directive 2009/71/Euratom, Directive 2011/70/Euratom and Council Directive 2013/59/Euratom ( 24 ), as well as applicable Union environmental law adopted under Article 192 TFEU, in particular Directive 2011/92/EU of the European Parliament and of the Council ( 25 ) and Directive 2000/60/EC of the European Parliament and of the Council ( 26 );

(c) 

the Member State has in place, as of the approval date of the project, a radioactive waste management fund and a nuclear decommissioning fund which can be combined;

(d) 

the Member State has demonstrated that it will have resources available at the end of the estimated useful life of the nuclear power plant corresponding to the estimated cost of radioactive waste management and decommissioning in compliance with Commission Recommendation 2006/851/Euratom ( 27 );

(e) 

the Member State has operational final disposal facilities for all very low-, low- and intermediate-level radioactive waste, notified to the Commission under Article 41 Euratom Treaty or Article 1(4) of Council Regulation (Euratom) No 2587/1999, and included in the national programme updated under Directive 2011/70/Euratom;

(f) 

the Member State has a documented plan with detailed steps to have in operation, by 2050, a disposal facility for high-level radioactive waste describing all of the following:

(i) 

concepts or plans and technical solutions for spent fuel and radioactive waste management from generation to disposal;

(ii) 

concepts or plans for the post-closure period of a disposal facility’s lifetime, including the period during which appropriate controls are retained and the means to be employed to preserve knowledge of that facility in the longer term;

(iii) 

the responsibilities for the plan implementation and the key performance indicators to monitor its progress;

(iv) 

cost assessments and financing schemes.

For the purposes of point (f), Member States may use plans drawn up as part of the national programme required by Articles 11 and 12 of Directive 2011/70/Euratom.

2. The project is part of a Union financed research programme or the project has been notified to the Commission in accordance with Article 41 of the Euratom Treaty or with Article 1(4) of Council Regulation (Euratom) No 2587/1999, where either of these provisions is applicable, the Commission has given its opinion on it in accordance with Article 43 of the Euratom Treaty, and all the issues raised in the opinion, with relevance for the application of Article 10(2) and Article 17 of Regulation (EU) 2020/852, and of the technical screening criteria laid down in this Section have been satisfactorily addressed.

3. The Member State concerned has committed to report to the Commission every five years for each project on all of the following:

(a) 

the adequacy of the accumulated resources referred to in point 1(c);

(b) 

actual progress in the implementation of the plan referred to in point 1(f).

On the basis of the reports, the Commission shall review the adequacy of the accumulated resources of the radioactive waste management fund and the nuclear decommissioning fund referred to in point 1(c) and the progress in the implementation of the documented plan referred to in point 1(f) and it may address an opinion to the Member State concerned.

4. The activity complies with national legislation that transposes the legislation referred to in point 1(a) and (b), including as regards the evaluation, in particular through stress tests, of the resilience of the nuclear power plants located on the territory of the Union against extreme natural hazards, including earthquakes. Accordingly, the activity takes place on the territory of a Member State where the operator of a nuclear installation:

(a) 

has submitted a demonstration of nuclear safety, whose scope and level of detail is commensurate with the potential magnitude and nature of the hazard relevant for the nuclear installation and its site (Article 6, point (b), of Directive 2009/71/Euratom);

(b) 

has taken defence-in-depth measures to ensure, inter alia, that the impact of extreme external natural and unintended man-made hazards is minimised (Article 8b(1), point (a) of Directive 2009/71/Euratom);

(c) 

has performed an appropriate site and installation-specific assessment when the operator concerned applies for a licence to construct or operate a nuclear power plant (Article 8c(a) of Directive 2009/71/Euratom).

5. The activity fulfils the requirements of Directive 2009/71/Euratom, supported by the latest international guidance from the International Atomic Energy Agency (‘IAEA’) and the Western European Nuclear Regulator’s Association (‘WENRA’), contributing to increasing the resilience and the ability of new and existing nuclear power plants to cope with extreme natural hazards, including floods and extreme weather conditions.

6. Radioactive waste as referred to in point 1(e) and (f), is disposed of in the Member State in which it was generated, unless there is an agreement between the Member State concerned and the Member State of destination, as established in Directive 2011/70/Euratom. In that case, the Member State of destination has radioactive waste management and disposal programmes and a suitable disposal facility in operation in compliance with the requirements of Directive 2011/70/Euratom.



Additional criteria pertaining to substantial contribution to climate change mitigation

The activity aims at generating or generates electricity using nuclear energy. Life-cycle greenhouse gas (GHG) emissions from the generation of electricity from nuclear energy are below the threshold of 100 g CO2e/kWh.

Life-cycle GHG emission savings are calculated using Commission Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 or ISO 14064-1:2018.

Quantified life-cycle GHG emissions are verified by an independent third party.

Additional criteria pertaining to Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

The activity complies with the requirements laid down in Article 6(b), 8b(1), point (a), and Article 8c(a) of Directive 2009/71/Euratom.

The activity fulfils the requirements of Directive 2009/71/Euratom implemented in accordance with the international guidance of the IAEA and WENRA relating to extreme natural hazards, including floods and extreme weather conditions.

▼M2

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

Environmental degradation risks related to preserving water quality and avoiding water stress are identified and addressed, in accordance with a water use and protection management plan, developed in consultation with stakeholders concerned.

In order to limit thermal anomalies associated with the discharge of waste heat, operators of inland nuclear power plants utilising once-through wet cooling by taking water from a river or a lake control:

(a)  the maximum temperature of the recipient freshwater body after mixing, and

(b)  the maximum temperature difference between the discharged cooling water and the recipient freshwater body.

The temperature control is implemented in accordance with the individual licence conditions for the specific operations, where applicable, or threshold values in line with Union law.

The activity complies with the International Finance Corporation (IFC) standards.

Nuclear activities are operated in compliance with the requirements of Directive 2000/60/EC and of Council Directive 2013/51/Euratom laying down requirements for the protection of the health of the general public with regard to radioactive substances in water intended for human consumption.

▼M1

(4)  Transition to a circular economy

A plan for the management of both non-radioactive and radioactive waste is in place and ensures maximal reuse or recycling of such waste at end of life in accordance with the waste hierarchy, including through contractual agreements with waste management partners, the reflection in financial projections or the official project documentation.

During operation and decommissioning, the amount of radioactive waste is minimised and the amount of free-release materials is maximised in accordance with Directive 2011/70/Euratom, and in compliance with the radiation protection requirements laid down in Directive 2013/59/Euratom.

A financing scheme is in place to ensure adequate funding for all decommissioning activities and for the management of spent fuel and radioactive waste, in compliance with Directive 2011/70/Euratom and Recommendation 2006/851/Euratom.

An Environmental Impact Assessment is completed prior to the construction of a nuclear power plant, in accordance with Directive 2011/92/EU. The required mitigation and compensatory measures are implemented.

The relevant elements in this Section are covered by Member States’ reports to the Commission in accordance with Article 14(1) of Directive 2011/70/Euratom.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Non-radioactive emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the best available techniques (BAT) conclusions for large combustion plants. No significant cross-media effects occur.

For nuclear power plants greater than 1 MW thermal input but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

Radioactive discharges to air, water bodies and ground (soil) comply with individual licence conditions for the specific operations, where applicable, or national threshold values in line with Directive 2013/51/Euratom (1) and Directive 2013/59/Euratom.

Spent fuel and radioactive waste is safely and responsibly managed in accordance with Directive 2011/70/Euratom and Directive 2013/59/Euratom.

An adequate capacity of interim storage is available for the project, while national plans for disposal are in place to minimise the duration of interim storage, in compliance with the provision of Directive 2011/70/Euratom that considers radioactive waste storage, including long-term storage, as an interim solution, but not an alternative to disposal.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

An Environmental Impact Assessment is completed prior to the construction of a nuclear power plant, in accordance with Directive 2011/92/EU. The required mitigation and compensatory measures are implemented.

For sites/operations located in or near biodiversity sensitive areas likely to have a significant effect on biodiversity sensitive areas (including the Natura 2000 network of protected areas, Unesco World Heritage sites and Key Biodiversity Areas, as well as other protected areas), an appropriate assessment, where applicable, has been conducted and based on its conclusions the necessary mitigation measures are implemented.

The sites/operations shall not be detrimental to the conservation status of any of the habitats or species present in protected areas.

(1)   

Council Directive 2013/51/Euratom of 22 October 2013 laying down requirements for the protection of the health of the general public with regard to radioactive substances in water intended for human consumption (OJ L 296, 7.11.2013, p. 12).

4.27.    Construction and safe operation of new nuclear power plants, for the generation of electricity or heat, including for hydrogen production, using best-available technologies

For the purposes of this Section, best-available technologies mean technologies that fully comply with the requirements of Directive 2009/71/Euratom and fully respect the most recent technical parameters of the IAEA standards and the WENRA Safety objectives and Reference Levels.

Description of the activity

Construction and safe operation of new nuclear installations for which the construction permit has been issued by 2045 by Member States’ competent authorities, in accordance with applicable national law, to produce electricity or process heat, including for the purposes of district heating or industrial processes such as hydrogen production (new nuclear installations), as well as their safety upgrades.

The activity is classified under NACE codes D35.11 and F42.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with all the technical screening criteria set out in this Section.

Technical screening criteria



General criteria pertaining to substantial contribution to climate change mitigation and Do no significant harm (‘DNSH’)

1. The project related to the economic activity (‘the project’) is located in a Member State which complies with all of the following:

(a) 

the Member State has fully transposed Council Directive 2009/71/Euratom and Council Directive 2011/70/Euratom;

(b) 

the Member State complies with the Euratom Treaty and with legislation adopted on its basis, in particular, Directive 2009/71/Euratom, Directive 2011/70/Euratom and Directive 2013/59/Euratom, as well as applicable Union environmental law adopted under Article 192 TFEU, in particular Directive 2011/92/EU and Directive 2000/60/EC;

(c) 

the Member State has in place, as of the approval date of the project, a radioactive waste management fund and a nuclear decommissioning fund which can be combined;

(d) 

the Member State has demonstrated that it will have resources available at the end of the estimated useful life of the nuclear power plant corresponding to the estimated cost of radioactive waste management and decommissioning in compliance with Recommendation 2006/851/Euratom;

(e) 

the Member State has operational final disposal facilities for all very low-, low- and intermediate-level radioactive waste, notified to the Commission under Article 41 of the Euratom Treaty or under Article 1(4) of Council Regulation 2587/1999 and included in the national programme updated under Council Directive 2011/70/Euratom;

(f) 

the Member State has a documented plan with detailed steps to have in operation, by 2050, a disposal facility for high-level radioactive waste describing all of the following:

(i) 

concepts or plans and technical solutions for spent fuel and radioactive waste management from generation to disposal;

(ii) 

concepts or plans for the post-closure period of a disposal facility’s lifetime, including the period during which appropriate controls are retained and the means to be employed to preserve knowledge of that facility in the longer term;

(iii) 

the responsibilities for the plan implementation and the key performance indicators to monitor its progress;

(iv) 

cost assessments and financing schemes.

For the purposes of point (f), Member States may use the plans drawn up as part of the national programme required by Articles 11 and 12 of Directive 2011/70/Euratom.

2. The project fully applies the best-available technology and from 2025 accident-tolerant fuel. The technology is certified and approved by the national safety regulator.

3. The project has been notified to the Commission in accordance with Article 41 of the Euratom Treaty or with Article 1(4) of Council Regulation 2587/1999, where either of these provisions is applicable, the Commission has given its opinion on it in accordance with Article 43 of the Euratom Treaty, and all the issues raised in the opinion, with relevance for the application of Article 10(2) and Article 17 of Regulation (EU) 2020/852, and of the technical screening criteria laid down in this Section, have been satisfactorily addressed.

4. The Member State concerned has committed to report to the Commission every five years for each project on all of the following:

(a) 

the adequacy of the accumulated resources referred to in point 1(c);

(b) 

actual progress in the implementation of the plan referred to in point 1(f).

On the basis of the reports, the Commission shall review the adequacy of the accumulated resources of the radioactive waste management fund and the nuclear decommissioning fund referred to in point 1(c) and the progress in the implementation of the documented plan referred to in point 1(f) and it may address an opinion to the Member State concerned.

5. The Commission shall review, as of 2025 and at least every 10 years, the technical parameters corresponding to the best-available technology on the basis of the assessment by the European Nuclear Safety Regulators’ Group (‘ENSREG’).

6. The activity complies with national legislation that transposes the legislation referred to in point 1(a) and (b), including as regards the evaluation, in particular through stress-tests, of the resilience of the nuclear power plants located on the territory of the Union against extreme natural hazards, including earthquakes. Accordingly, the activity takes place on the territory of a Member State where the operator of a nuclear installation:

(a) 

has submitted a demonstration of nuclear safety, whose scope and level of detail is commensurate with the potential magnitude and nature of the hazard relevant for the nuclear installation and its site (Article 6, point (b), of Directive 2009/71/Euratom);

(b) 

has taken defence-in-depth measures to ensure, inter alia, that the impact of extreme external natural and unintended man-made hazards is minimised (Article 8b(1), point (a), of Directive 2009/71/Euratom);

(c) 

has performed an appropriate site and installation-specific assessment when the operator concerned applies for a licence to construct or operate a nuclear power plant (Article 8c(a) of Directive 2009/71/Euratom).

7. The activity fulfils the requirements of Directive 2009/71/Euratom, supported by the latest international guidance from the IAEA and WENRA, contributing to increasing the resilience and the ability of new and existing nuclear power plants to cope with extreme natural hazards, including floods and extreme weather conditions.

8. Radioactive waste as referred to in point 1(e) and (f) is disposed of in the Member State in which it was generated, unless there is an agreement between the Member State concerned and the Member State of destination, as established in Directive 2011/70/Euratom. In that case, the Member State of destination has radioactive waste management and disposal programmes and a suitable disposal facility in operation in compliance with the requirements of Directive 2011/70/Euratom.



Additional criteria pertaining to substantial contribution to climate change mitigation

The activity generates electricity using nuclear energy. Life-cycle greenhouse gas (GHG) emissions from the generation of electricity from nuclear energy are below the threshold of 100 g CO2e/kWh.

Life-cycle GHG emission savings are calculated using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 or ISO 14064-1:2018.

Quantified life-cycle GHG emissions are verified by an independent third party.

Additional criteria pertaining to Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

The activity complies with the requirements laid down in Article 6(b), Article 8b(1), point (a), and Article 8c(a) of Directive 2009/71/Euratom.

The activity fulfils the requirements of Directive 2009/71/Euratom, implemented in accordance with the international guidance of the IAEA and WENRA relating to extreme natural hazards, including floods and extreme weather conditions.

▼M2

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

Environmental degradation risks related to preserving water quality and avoiding water stress are identified and addressed, in accordance with a water use and protection management plan, developed in consultation with stakeholders concerned.

In order to limit thermal anomalies associated with the discharge of waste heat, operators of inland nuclear power plants utilising once-through wet cooling by taking water from a river or a lake control:

(a)  the maximum temperature of the recipient freshwater body after mixing, and

(b)  the maximum temperature difference between the discharged cooling water and the recipient freshwater body.

The temperature control is implemented in accordance with the individual licence conditions for the specific operations, where applicable, or threshold values in line with Union law.

The activity complies with the International Finance Corporation (IFC) standards.

Nuclear activities are operated in compliance with Directive 2000/60/EC regarding water bodies used for the abstraction of drinking water and Council Directive 2013/51/Euratom laying down requirements for the protection of the health of the general public with regard to radioactive substances in water intended for human consumption.

▼M1

(4)  Transition to a circular economy

A plan for the management of both non-radioactive and radioactive waste is in place and ensures maximal reuse or recycling of such waste at end of life in accordance with the waste hierarchy, including through contractual agreements with waste management partners, the reflection in financial projections or the official project documentation.

During operation and decommissioning, the amount of radioactive waste is minimised and the amount of free-release materials is maximised in accordance with Directive 2011/70/Euratom, and in compliance with the radiation protection requirements laid down in Directive 2013/59/Euratom.

A financing scheme is in place to ensure adequate funding for all decommissioning activities and for the management of spent fuel and radioactive waste, in compliance with Directive 2011/70/Euratom and Recommendation 2006/851/Euratom.

An Environmental Impact Assessment is completed prior to the construction of a nuclear power plant, in accordance with Directive 2011/92/EU. The required mitigation and compensatory measures are implemented.

The relevant elements in this Section are covered by Member States’ reports to the Commission in accordance with Article 14(1) of Directive 2011/70/Euratom.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Non-radioactive emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the best available techniques (BAT) conclusions for large combustion plants. No significant cross-media effects occur.

For nuclear power plants greater than 1 MW thermal input but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

Radioactive discharges to air, water bodies and ground (soil) comply with individual licence conditions for the specific operations, where applicable, or national threshold values in line with Directive 2013/51/Euratom and Directive 2013/59/Euratom.

Spent fuel and radioactive waste is safely and responsibly managed in accordance with Directive 2011/70/Euratom and Directive 2013/59/Euratom.

An adequate capacity of interim storage is available for the project, while national plans for disposal are in place to minimise the duration of interim storage, in compliance with Directive 2011/70/Euratom that considers radioactive waste storage, including long-term storage, as an interim solution, but not an alternative to disposal.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

An Environmental Impact Assessment is completed prior to the construction of a nuclear power plant, in accordance with Directive 2011/92/EU. The required mitigation and compensatory measures are implemented.

For sites/operations located in or near biodiversity sensitive areas likely to have a significant effect on biodiversity sensitive areas (including the Natura 2000 network of protected areas, Unesco World Heritage sites and Key Biodiversity Areas, as well as other protected areas), an appropriate assessment, where applicable, has been conducted and based on its conclusions the necessary mitigation measures are implemented.

The sites/operations shall not be detrimental to the conservation status of any of the habitats or species present in protected areas.

4.28.    Electricity generation from nuclear energy in existing installations

Description of the activity

Modification of existing nuclear installations for the purposes of extension, authorised by Member States’ competent authorities by 2040 in accordance with applicable national law, of the service time of safe operation of nuclear installations that produce electricity or heat from nuclear energy (‘nuclear power plants’).

The activity is classified under NACE codes D35.11 and F42.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with all the technical screening criteria set out in this Section.

Technical screening criteria



General criteria pertaining to substantial contribution to climate change mitigation and Do no significant harm (‘DNSH’)

1. The project related to the economic activity (‘the project’) is located in a Member State which complies with all of the following:

(a) 

the Member State has fully transposed Council Directive 2009/71/Euratom and Council Directive 2011/70/Euratom;

(b) 

the Member State complies with the Euratom Treaty and with legislation adopted on its basis, in particular, Directive 2009/71/Euratom, Directive 2011/70/Euratom and Directive 2013/59/Euratom, and with applicable Union environmental law adopted under Article 192 TFEU, in particular Directive 2011/92/EU and Directive 2000/60/EC;

(c) 

the Member State has in place, as of the approval date of the project, a radioactive waste management fund and a nuclear decommissioning fund which can be combined;

(d) 

the Member State has demonstrated that it will have resources available at the end of the estimated useful life of the nuclear power plant corresponding to the estimated cost of radioactive waste management and decommissioning in compliance with Recommendation 2006/851/Euratom;

(e) 

the Member State has operational final disposal facilities for all very low-, low- and intermediate-level radioactive waste, notified to the Commission under Article 41 of the Euratom Treaty or under Article 1(4) of Council Regulation 2587/1999 and included in the national programme updated under Council Directive 2011/70/Euratom;

(f) 

for projects authorised after 2025, the Member State has a documented plan with detailed steps to have in operation, by 2050, a disposal facility for high-level radioactive waste describing all of the following:

(i) 

concepts or plans and technical solutions for spent fuel and radioactive waste management from generation to disposal;

(ii) 

concepts or plans for the post-closure period of a disposal facility’s lifetime, including the period during which appropriate controls are retained and the means to be employed to preserve knowledge of that facility in the longer term;

(iii) 

the responsibilities for the plan implementation and the key performance indicators to monitor its progress;

(iv) 

cost assessments and financing schemes.

For the purposes of point (f), Member States may use the plans drawn up as part of the national programme required by Articles 11 and 12 of Directive 2011/70/Euratom.

2. The upgraded project implements any reasonably practicable safety improvement and from 2025 makes use of accident-tolerant fuel. The technology is certified and approved by the national safety regulator.

3. The project has been notified to the Commission in accordance with Article 41 of the Euratom Treaty or with Article 1(4) of Council Regulation 2587/1999, where either of these provisions is applicable, the Commission has given its opinion on it in accordance with Article 43 of the Euratom Treaty, and all the issues raised in the opinion, with relevance for the application of Article 10(2) and Article 17 of Regulation (EU) 2020/852, and of the technical screening criteria laid down in this Section, have been satisfactorily addressed.

4. The Member State concerned has committed to report to the Commission every five years for each project on all of the following:

(a) 

the adequacy of the accumulated resources referred to in point 1(c);

(b) 

actual progress in the implementation of the plan referred to in point 1(f).

On the basis of the reports, the Commission shall review the adequacy of the accumulated resources of the radioactive waste management fund and the nuclear decommissioning fund referred to in point 1(c) and the progress in the implementation of the documented plan referred to in point 1(f) and it may address an opinion to the Member State concerned.

5. The activity complies with national legislation that transposes the legislation referred to in point 1(a) and (b), including as regards the evaluation, in particular through stress-tests, of the resilience of the Union nuclear power plants against extreme natural hazards, including earthquakes. Accordingly, the activity takes place on the territory of a Member State where the operator of a nuclear installation:

(a) 

has submitted a demonstration of nuclear safety, whose scope and level of detail is commensurate with the potential magnitude and nature of the hazard relevant for the nuclear installation and its site (Article 6, point (b), of Directive 2009/71/Euratom);

(b) 

has taken defence-in-depth measures to ensure, inter alia, that the impact of extreme external natural and unintended man-made hazards is minimised (Article 8b(1), point (a), of Directive 2009/71/Euratom);

(c) 

has performed an appropriate site and installation-specific assessment when the operator concerned applies for a licence to construct or operate a nuclear power plant (Article 8c(a) of Directive 2009/71/Euratom).

6. The activity fulfils the requirements of Directive 2009/71/Euratom, supported by the latest international guidance from the IAEA and WENRA, contributing to increasing the resilience and the ability of new and existing nuclear power plants to cope with extreme natural hazards, including floods and extreme weather conditions.

7. Radioactive waste referred to in point 1(e) and (f) is disposed of in the Member State in which it was generated, unless there is an agreement between the Member State concerned and the Member State of destination, as established in Directive 2011/70/Euratom. In that case, the Member State of destination has radioactive waste management and disposal programmes and a suitable disposal facility in operation in compliance with the requirements of Directive 2011/70/Euratom.



Additional criteria pertaining to substantial contribution to climate change mitigation

The activity generates electricity using nuclear energy. Life-cycle greenhouse gas (GHG) emissions from the generation of electricity from nuclear energy are below the threshold of 100 g CO2e/kWh.

Life-cycle GHG emission savings are calculated using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 or ISO 14064-1:2018.

Quantified life-cycle GHG emissions are verified by an independent third party.

Additional criteria pertaining to Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

The activity complies with the requirements laid down in Article 6(b), Article 8b(1), point (a), and Article 8c(a) of Directive 2009/71/Euratom.

The activity fulfils the requirements of Directive 2009/71/Euratom implemented in accordance with international guidance of the IAEA and WENRA relating to extreme natural hazards, including floods and extreme weather conditions.

▼M2

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

Environmental degradation risks related to preserving water quality and avoiding water stress are identified and addressed, in accordance with a water use and protection management plan, developed in consultation with stakeholders concerned.

In order to limit thermal anomalies associated with the discharge of waste heat, operators of inland nuclear power plants utilising once-through wet cooling by taking water from a river or a lake control:

(a)  the maximum temperature of the recipient freshwater body after mixing, and

(b)  the maximum temperature difference between the discharged cooling water and the recipient freshwater body.

The temperature control is implemented in accordance with the individual licence conditions for the specific operations, where applicable, or threshold values in line with Union law.

The activity complies with the International Finance Corporation (IFC) standards.

Nuclear activities are operated in compliance with the requirements of Directive 2000/60/EC regarding water bodies used for the abstraction of drinking water and Directive 2013/51/Euratom laying down requirements for the protection of the health of the general public with regard to radioactive substances in water intended for human consumption.

▼M1

(4)  Transition to a circular economy

A plan for the management of both non-radioactive and radioactive waste is in place and ensures maximal reuse or recycling of such waste at end of life in accordance with the waste hierarchy, including through contractual agreements with waste management partners, the reflection in financial projections or the official project documentation.

During operation and decommissioning, the amount of radioactive waste is minimised and the amount of free-release materials is maximised in accordance with Directive 2011/70/Euratom, and in compliance with the radiation protection requirements laid down in Directive 2013/59/Euratom.

A financing scheme is in place to ensure adequate funding for all decommissioning activities and for the management of spent fuel and radioactive waste, in compliance with Directive 2011/70/Euratom and Recommendation 2006/851/Euratom.

An Environmental Impact Assessment is completed prior to the construction of a nuclear power plant, in accordance with Directive 2011/92/EU. The required mitigation and compensatory measures are implemented.

The relevant elements in this Section are covered by Member States’ reports to the Commission in accordance with Article 14(1) of Directive 2011/70/Euratom.

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Non-radioactive emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the best available techniques (BAT) conclusions for large combustion plants. No significant cross-media effects occur.

For nuclear power plants greater than 1 MW thermal input but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

Radioactive discharges to air, water bodies and ground (soil) comply with individual licence conditions for the specific operations, where applicable, or national threshold values in line with Directive 2013/51/Euratom and Directive 2013/59/Euratom.

Spent fuel and radioactive waste is safely and responsibly managed in accordance with Directive 2011/70/Euratom and Directive 2013/59/Euratom.

An adequate capacity of interim storage is available for the project, while national plans for disposal are in place to minimise the duration of interim storage, in compliance with Directive 2011/70/Euratom that considers radioactive waste storage, including long-term storage, as an interim solution, but not an alternative to disposal.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

An Environmental Impact Assessment is completed prior to the construction of a nuclear power plant, in accordance with Directive 2011/92/EU. The required mitigation and compensatory measures are implemented.

For sites/operations located in or near biodiversity sensitive areas likely to have a significant effect on biodiversity sensitive areas (including the Natura 2000 network of protected areas, Unesco World Heritage sites and Key Biodiversity Areas, as well as other protected areas), an appropriate assessment, where applicable, has been conducted and based on its conclusions the necessary mitigation measures are implemented.

The sites/operations shall not be detrimental to the conservation status of any of the habitats or species present in protected areas.

4.29.    Electricity generation from fossil gaseous fuels

Description of the activity

Construction or operation of electricity generation facilities that produce electricity using fossil gaseous fuels. This activity does not include electricity generation from the exclusive use of renewable non-fossil gaseous and liquid fuels as referred to in Section 4.7 of this Annex and biogas and bio-liquid fuels as referred to in Section 4.8 of this Annex.

The economic activities in this category may be associated with several NACE codes, notably D35.11 and F42.22 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The activity meets either of the following criteria:

(a)  the life-cycle GHG emissions from the generation of electricity using fossil gaseous fuels are lower than 100 g CO2e/kWh.

Life-cycle GHG emissions are calculated based on project-specific data, where available, using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 or ISO 14064-1:2018.

Quantified life-cycle GHG emissions are verified by an independent third party.

Where facilities incorporate any form of abatement, including carbon capture or use of renewable or low-carbon gases, that abatement activity complies with the criteria set out in the relevant Section of this Annex, where applicable.

Where the CO2 that would otherwise be emitted from the electricity generation process is captured for the purpose of underground storage, the CO2 is transported and stored underground, in accordance with the technical screening criteria set out in Sections 5.11 and 5.12 of this Annex.

(b)  facilities for which the construction permit is granted by 31 December 2030 comply with all of the following:

(i)  direct GHG emissions of the activity are lower than 270g CO2e/kWh of the output energy, or annual direct GHG emissions of the activity do not exceed an average of 550kgCO2e/kW of the facility’s capacity over 20 years;

(ii)  the power to be replaced cannot be generated from renewable energy sources, based on a comparative assessment with the most cost-effective and technically feasible renewable alternative for the same capacity identified; the result of this comparative assessment is published and is subject to a stakeholder consultation;

(iii)  the activity replaces an existing high emitting electricity generation activity that uses solid or liquid fossil fuels;

(iv)  the newly installed production capacity does not exceed the capacity of the replaced facility by more than 15 %;

(v)  the facility is designed and constructed to use renewable and/or low-carbon gaseous fuels and the switch to full use of renewable and/or low-carbon gaseous fuels takes place by 31 December 2035, with a commitment and verifiable plan approved by the management body of the undertaking;

(vi)  the replacement leads to a reduction in emissions of at least 55 % GHG over the lifetime of the newly installed production capacity;

(vii)  where the activity takes place on the territory of a Member State in which coal is used for energy generation, that Member State has committed to phase-out the use of energy generation from coal and has reported this in its integrated national energy and climate plan referred to in Article 3 of Regulation (EU) 2018/1999 of the European Parliament and of the Council (1) or in another instrument.

Compliance with the criteria referred to in point 1(b) is verified by an independent third party. The independent third-party verifier has the necessary resources and expertise to perform such verification. The independent third party verifier does not have any conflict of interest with the owner or the funder, and is not involved in the development or operation of the activity. The independent third party verifier carries out diligently the verification of compliance with the technical screening criteria. In particular, every year the independent third party publishes and transmits to the Commission a report:

(a)  certifying the level of direct GHG emissions referred to in point 1(b)(i);

(b)  where applicable, assessing whether annual direct GHG emissions of the activity are on a credible trajectory to comply with the average threshold over 20 years referred to in point 1(b)(i);

(c)  assessing whether the activity is on a credible trajectory to comply with point 1(b)(v).

When undertaking the assessment referred to in point 1(b), the independent third party verifier takes into account in particular the planned annual direct GHG emissions for each year of the trajectory, realised annual direct GHG emissions, planned and realised operating hours, and planned and realised use of renewable or low carbon gases.

On the basis of the reports transmitted to it, the Commission may address an opinion to the relevant operators. The Commission shall take those reports into account when performing the review referred to in Article 19(5) of Regulation (EU) 2020/852.

2.  The activity meets either of the following criteria:

(a)  at construction, measurement equipment for monitoring of physical emissions, such as those from methane leakage, is installed or a leak detection and repair programme is introduced;

(b)  at operation, physical measurement of emissions are reported and leak is eliminated.

3.  Where the activity blends fossil gaseous fuels with gaseous or liquid biofuels, the agricultural biomass used for the production of the biofuels complies with the criteria laid down in Article 29, paragraphs 2 to 5, of Directive (EU) 2018/2001 while forest biomass complies with the criteria laid down in Article 29, paragraphs 6 and 7, of that Directive.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for large combustion plants.

No significant cross-media effects occur.

For combustion plants with thermal input greater than 1 MW but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Regulation (EU) 2018/1999 of the European Parliament and of the Council of 11 December 2018 on the Governance of the Energy Union and Climate Action, amending Regulations (EC) No 663/2009 and (EC) No 715/2009 of the European Parliament and of the Council, Directives 94/22/EC, 98/70/EC, 2009/31/EC, 2009/73/EC, 2010/31/EU, 2012/27/EU and 2013/30/EU of the European Parliament and of the Council, Council Directives 2009/119/EC and (EU) 2015/652 and repealing Regulation (EU) No 525/2013 of the European Parliament and of the Council (OJ L 328, 21.12.2018, p. 1)

4.30.    High-efficiency co-generation of heat/cool and power from fossil gaseous fuels

Description of the activity

Construction, refurbishment, and operation of combined heat/cool and power generation facilities using fossil gaseous fuels. This activity does not include high-efficiency co-generation of heat/cool and power from the exclusive use of renewable non-fossil gaseous and liquid fuels referred to in Section 4.19 of this Annex, and biogas and bio-liquid fuels referred to in Section 4.20 of this Annex.

The economic activities in this category may be associated with NACE codes D35.11 and D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The activity meets either of the following criteria:

(a)  the life-cycle GHG emissions from the co-generation of heat/cool and power from gaseous fuels are lower than 100 g CO2e per 1 kWh of energy output of the co-generation.

Life-cycle GHG emissions are calculated based on project-specific data, where available, using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 or ISO 14064-1:2018.

Quantified life-cycle GHG emissions are verified by an independent third party.

Where facilities incorporate any form of abatement, including carbon capture or use of renewable or low-carbon gases, that abatement activity complies with the relevant Sections of this Annex, where applicable. Where the CO2 emitted from the electricity generation is captured, the CO2 shall meet the emissions limit set out in point 1 of this Section and, the CO2 be transported and stored underground in a way that meets the technical screening criteria for transport of CO2 and storage of CO2 set out in Sections 5.11 and 5.12, respectively of this Annex.

(b)  facilities for which the construction permit is granted by 31 December 2030 comply with all of the following:

(i)  the activity achieves primary energy savings of at least 10 % compared with the references to separate production of heat and electricity; the primary energy savings are calculated on the basis of formula provided in Directive 2012/27/EU;

(ii)  direct GHG emissions of the activity are lower than 270 g CO2e/kWh of the output energy;

(iii)  the power and/or heat/cool to be replaced cannot be generated from renewable energy sources, based on a comparative assessment with the most cost-effective and technically feasible renewable alternative for the same capacity identified; the result of this comparative assessment is published and is subject to a stakeholder consultation;

(iv)  the activity replaces an existing high emitting combined heat/cool and power generation activity, a separate heat/cool generation activity, or a separate power generation activity that uses solid or liquid fossil fuels;

(v)  the newly installed production capacity does not exceed the capacity of the replaced facility;

(vi)  the facility is designed and constructed to use renewable and/or low-carbon gaseous fuels and the switch to full use of renewable and/or low-carbon gaseous fuels takes place by 31 December 2035, with a commitment and verifiable plan approved by the management body of the undertaking;

(vii)  the replacement leads to a reduction in emissions of at least 55 % GHG per kWh of output energy;

(viii)  the refurbishment of the facility does not increase production capacity of the facility;

(ix)  where the activity takes place on the territory of a Member State in which coal is used for energy generation, that Member State has committed to phase-out the use of energy generation from coal and has reported this in its integrated national energy and climate plan referred to in Article 3 of Regulation (EU) 2018/1999 or in another instrument.

Compliance with the criteria referred to in point 1(b) is verified by an independent third party. The independent third party verifier has the necessary resources and expertise to perform such verification. The independent third party verifier does not have any conflict of interest with the owner or the funder, and is not involved in the development or operation of the activity. The independent third party verifier carries out diligently the verification of compliance with the technical screening criteria. In particular, every year the independent third party publishes and transmits to the Commission a report:

(a)  certifying the level of direct GHG emissions referred to in point 1(b)(ii);

(b)  assessing whether the activity is on a credible trajectory to comply with point 1(b)(vi).

On the basis of the reports transmitted to it, the Commission may address an opinion to the operators concerned. The Commission shall take those reports into account when performing the review referred to in Article 19(5) of Regulation (EU) 2020/852.

2.  The activity meets either of the following criteria:

(a)  at construction, measurement equipment for monitoring of physical emissions, including those from methane leakage, is installed or a leak detection and repair program is introduced;

(b)  at operation, physical measurement of emissions are reported and any leak is eliminated.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for large combustion plants.

No significant cross-media effects occur.

For combustion plants with thermal input greater than 1 MW but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

4.31.    Production of heat/cool from fossil gaseous fuels in an efficient district heating and cooling system

Description of the activity

Construction, refurbishment and operation of heat generation facilities that produce heat/cool using fossil gaseous fuels connected to efficient district heating and cooling within the meaning of Article 2, point (41) of Directive 2012/27/EU. This activity does not include production of heat/cool in an efficient district heating from the exclusive use of renewable non-fossil gaseous and liquid fuels referred to in Section 4.23 of this Annex and biogas and bio-liquid fuels referred to in Section 4.24 of this Annex.

The activity is classified under NACE code D35.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The activity meets either of the following criteria:

(a)  Life-cycle GHG emissions from the generation of heat/cool from gaseous fuels are lower than 100 g CO2e/kWh. Life-cycle GHG emission savings are calculated using Recommendation 2013/179/EU or, alternatively, using ISO 14067:2018 or ISO 14064-1:2018.

Quantified life-cycle GHG emissions are verified by an independent third party.

Where facilities incorporate any form of abatement, including carbon capture or use of renewable or low-carbon gases, that abatement activity complies with the relevant Sections of this Annex, where applicable. Where the CO2 emitted from the electricity generation is captured, the CO2 shall meet the emissions limit set out in point 1 of this Section and shall be transported and stored underground in a way that meets the technical screening criteria for transport of CO2 and storage of CO2 set out in Sections 5.11 and 5.12, respectively of this Annex.

(b)  facilities for which the construction permit is granted by 31 December 2030 comply with all of the following:

(i)  the thermal energy generated by the activity is used in an efficient district heating and cooling system as defined in Directive 2012/27/EU;

(ii)  the direct GHG emissions of the activity are lower than 270 g CO2e/kWh of the output energy;

(iii)  the heat/cool to be replaced cannot be generated from renewable energy sources, based on a comparative assessment with the most cost-effective and technically feasible renewable alternative for the same capacity identified; the result of this comparative assessment is published and is subject to a stakeholder consultation;

(iv)  the activity replaces an existing high emitting heating/cooling activity using solid or liquid fossil fuel;

(v)  the newly installed production capacity does not exceed the capacity of the replaced facility;

(vi)  the facility is designed and constructed to use renewable and/or low-carbon gaseous fuels and the switch to full use of renewable and/or low-carbon gaseous fuels takes place by 31 December 2035, with a commitment and verifiable plan approved by the management body of the undertaking;

(vii)  the replacement leads to a reduction in emissions of at least 55 % GHG per kWh of output energy;

(viii)  the refurbishment of the facility does not increase production capacity of the facility;

(ix)  where the activity takes place on the territory of a Member State in which coal is used for energy generation, that Member State has committed to phase-out the use of energy generation from coal and has reported this in its integrated national energy and climate plan referred to in Article 3 of Regulation (EU) 2018/1999 or in another instrument.

Compliance with the criteria referred to in point 1(b) is verified by an independent third party. The independent third-party verifier has the necessary resources and expertise to perform such verification. The independent third party verifier does not have any conflict of interest with the owner or the funder, and is not be involved in the development or operation of the activity. The independent third party verifier carries out diligently the verification of compliance with the technical screening criteria. In particular, every year the independent third party publishes and transmits to the Commission a report:

(a)  certifying the level of direct GHG emissions referred to in point 1(b)(ii);

(b)  assessing whether the activity is on a credible trajectory to comply with point 1(b)(vi).

On the basis of the reports transmitted to it, the Commission may address an opinion to the operators concerned. The Commission shall take those reports into account when performing the review referred to in Article 19(5) of Regulation (EU) 2020/852.

2.  The activity meets either of the following criteria:

(a)  at construction, measurement equipment for monitoring of physical emissions, such as those from methane leakage, is installed or a leak detection and repair program is introduced;

(b)  at operation, physical measurement of emissions are reported and any leak is eliminated.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with the criteria set out in Appendix C to this Annex.

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for large combustion plants.

No significant cross-media effects occur.

For combustion plants with thermal input greater than 1 MW but below the thresholds for the BAT conclusions for large combustion plants to apply, emissions are below the emission limit values set out in Annex II, part 2, to Directive (EU) 2015/2193.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

▼B

5.   WATER SUPPLY, SEWERAGE, WASTE MANAGEMENT AND REMEDIATION

5.1.    Construction, extension and operation of water collection, treatment and supply systems

Description of the activity

Construction, extension and operation of water collection, treatment and supply systems.

The economic activities in this category could be associated with several NACE codes, in particular E36.00 and F42.99 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The water supply system complies with one of the following criteria:

(a)  the net average energy consumption for abstraction and treatment equals to or is lower than 0,5 kWh per cubic meter produced water supply. Net energy consumption may take into account measures decreasing energy consumption, such as source control (pollutant load inputs), and, as appropriate, energy generation (such as hydraulic, solar and wind energy);

(b)  the leakage level is either calculated using the Infrastructure Leakage Index (ILI) (1) rating method and the threshold value equals to or is lower than 1,5, or is calculated using another appropriate method and the threshold value is established in accordance with Article 4 of Directive (EU) 2020/2184 of the European Parliament and of the Council (2). That calculation is to be applied across the extent of water supply (distribution) network where the works are carried out, i.e. at water supply zone level, district metered area(s) (DMAs) or pressure managed area(s) (PMAs).

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

The Infrastructure Leakage Index (ILI) is calculated as current annual real losses (CARL)/unavoidable annual real losses (UARL): The current annual real losses (CARL) represent the amount of water that is actually lost from the distribution network (i.e. not delivered to final users). The unavoidable annual real losses (UARL) take into consideration that there will always be some leakage in a water distribution network. The UARL is calculated based on factors such as the length of the network, the number of service connections and the pressure at which the network is operating.

(2)   

Directive (EU) 2020/2184 of the European Parliament and of the Council of 16 December 2020 on the quality of water intended for human consumption (recast) (OJ L 435, 23.12.2020, p. 1).

5.2.    Renewal of water collection, treatment and supply systems

Description of the activity

Renewal of water collection, treatment and supply systems including renewals to water collection, treatment and distribution infrastructures for domestic and industrial needs. It implies no material changes to the volume of flow collected, treated or supplied.

The economic activities in this category could be associated with several NACE codes, in particular E36.00 and F42.99 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The renewal of the water supply system leads to improved energy efficiency in one of the following ways:

(a)  by decreasing the net average energy consumption of the system by at least 20 % compared to own baseline performance averaged for three years, including abstraction and treatment, measured in kWh per cubic meter produced water supply;

(b)  by closing the gap by at least 20 % either between the current leakage level averaged over three years, calculated using the Infrastructure Leakage Index (ILI) rating method and an ILI of 1.5 (1), or between the current leakage level averaged over three years, calculated using another appropriate method, and the threshold value established in accordance with Article 4 of Directive (EU) 2020/2184. The current leakage level averaged over three years is calculated across the extent of water supply (distribution) network where the works are carried out, i.e. for the renewed water supply (distribution) network at district metered area(s) (DMAs) or pressure managed area(s) (PMAs).

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

The Infrastructure Leakage Index (ILI) is calculated as current annual real losses (CARL)/unavoidable annual real losses (UARL): The current annual real losses (CARL) represent the amount of water that is actually lost from the distribution network (i.e. not delivered to final users). The unavoidable annual real losses (UARL) take into consideration that there will always be some leakage in a water distribution network. The UARL is calculated based on factors such as the length of the network, the number of service connections and the pressure at which the network is operating.

5.3.    Construction, extension and operation of waste water collection and treatment

Description of the activity

Construction, extension and operation of centralised waste water systems including collection (sewer network) and treatment.

The economic activities in this category could be associated with several NACE codes, in particular E37.00 and F42.99 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The net energy consumption of the waste water treatment plant equals to or is lower than:

(a)  35 kWh per population equivalent (p.e.) per annum for treatment plant capacity below 10 000 p.e.;

(b)  25 kWh per population equivalent (p.e.) per annum for treatment plant capacity between 10 000 and 100 000 p.e.;

(c)  20 kWh per population equivalent (p.e.) per annum for treatment plant capacity above 100 000 p.e.

Net energy consumption of the operation of the waste water treatment plant may take into account measures decreasing energy consumption relating to source control (reduction of storm water or pollutant load inputs), and, as appropriate, energy generation within the system (such as hydraulic, solar, thermal and wind energy).

2.  For the construction and extension of a waste water treatment plant or a waste water treatment plant with a collection system, which are substituting more GHG-intensive treatment systems (such as septic tanks, anaerobic lagoons), an assessment of the direct GHG emissions is performed (1). The results are disclosed to investors and clients on demand.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex. Where the waste water is treated to a level suitable for reuse in agricultural irrigation, the required risk management actions to avoid adverse environmental impacts have been defined and implemented (2).

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

Discharges to receiving waters meet the requirements laid down in Council Directive 91/271/EEC (3) or as required by national provisions stating maximum permissible pollutant levels from discharges to receiving waters.

Appropriate measures have been implemented to avoid and mitigate excessive storm water overflows from the waste water collection system, which may include nature-based solutions, separate storm water collection systems, retention tanks and treatment of the first flush.

Sewage sludge is used in accordance with Council Directive 86/278/EEC (4) or as required by national law relating to the spreading of sludge on the soil or any other application of sludge on and in the soil.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

For example, following IPCC guidelines for national GHG inventories for waste water treatment (version of 4.6.2021: https://www.ipcc-nggip.iges.or.jp/public/2019rf/pdf/5_Volume5/19R_V5_6_Ch06_Wastewater.pdf).

(2)   

As set out in Annex II of Regulation (EU) 2020/741 of the European Parliament and of the Council of 25 May 2020 on minimum requirements for water reuse (OJ L 177, 5.6.2020, p. 32).

(3)   

Council Directive 91/271/EEC of 21 May 1991 concerning urban waste-water treatment (OJ L 135, 30.5.1991, p. 40).

(4)   

Council Directive 86/278/EEC of 12 June 1986 on the protection of the environment, and in particular of the soil, when sewage sludge is used in agriculture (OJ L 181, 4.7.1986, p. 6).

5.4.    Renewal of waste water collection and treatment

Description of the activity

Renewal of centralised waste water systems including collection (sewer network) and treatment. It implies no material change related to the load or volume of flow collected or treated in the waste water system.

The economic activities in this category could be associated with NACE codes E37.00 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The renewal of a collection system improves energy efficiency by decreasing the average energy consumption by 20 % compared to own baseline performance averaged over three years, demonstrated on an annual basis. That decrease of energy consumption can be accounted for at the level of the project (i.e. the collection system renewal) or, across the downstream waste water agglomeration (i.e. including the downstream collection system, treatment plant or discharge of waste water).

2.  The renewal of a waste water treatment plant improves energy efficiency by decreasing the average energy consumption of the system by at least 20 % compared to own baseline performance averaged over three years, demonstrated on an annual basis.

3.  For the purposes of points 1 and 2, the net energy consumption of the system is calculated in kWh per population equivalent per annum of the waste water collected or effluent treated, taking into account measures decreasing energy consumption relating to source control (reduction of storm water or pollutant load inputs) and, as appropriate, energy generation within the system (such as hydraulic, solar, thermal and wind energy).

4.  For the purpose of point 1 and 2, the operator demonstrates that there are no material changes relating to external conditions, including modifications to discharge authorisation(s) or changes in load to the agglomeration that would lead to a reduction of energy consumption, independent of efficiency measures taken.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex. Where the waste water is treated to a level suitable for reuse in agricultural irrigation, the required risk management actions to avoid adverse environmental impacts have been defined and implemented (1).

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

Discharges to receiving waters meet the requirements laid down in Directive 91/271/EEC or as required by national provisions stating maximum permissible pollutant levels from discharges to receiving waters.

Appropriate measures have been implemented to avoid and mitigate excessive storm water overflows from the waste water collection system, which may include nature-based solutions, separate storm water collection systems, retention tanks and treatment of the first flush.

Sewage sludge is used in accordance with Directive 86/278/EEC or as required by national law relating to the spreading of sludge on the soil or any other application of sludge on and in the soil.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

As set out in Annex II to Regulation (EU) 2020/741 of the European Parliament and of the Council of 25May 2020 on minimum requirements for water reuse (OJ L 177, 5.6.2020, p. 32).

5.5.    Collection and transport of non-hazardous waste in source segregated fractions

Description of the activity

Separate collection and transport of non-hazardous waste in single or comingled fractions ( 28 ) aimed at preparing for reuse or recycling.

The economic activities in this category could be associated with NACE code E38.11 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

All separately collected and transported non-hazardous waste that is segregated at source is intended for preparation for reuse or recycling operations.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

Separately collected waste fractions are not mixed in waste storage and transfer facilities with other waste or materials with different properties.

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

N/A

5.6.    Anaerobic digestion of sewage sludge

Description of the activity

Construction and operation of facilities for the treatment of sewage sludge by anaerobic digestion with the resulting production and utilisation of biogas or chemicals.

The economic activities in this category could be associated with several NACE codes, in particular E37.00 and F42.99 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  A monitoring and contingency plan is in place in order to minimise methane leakage at the facility.

2.  The produced biogas is used directly for the generation of electricity or heat, or upgraded to bio-methane for injection in the natural gas grid, or used as vehicle fuel or as feedstock in chemical industry.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set for anaerobic treatment of waste in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for waste treatment (1). No significant cross-media effects occur.

Where the resulting digestate is intended for use as fertiliser or soil improver, its nitrogen content (with tolerance level ± 25 %) is communicated to the buyer or the entity in charge of taking off the digestate.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Implementing Decision (EU) 2018/1147.

5.7.    Anaerobic digestion of bio-waste

Description of the activity

Construction and operation of dedicated facilities for the treatment of separately collected bio-waste ( 29 ) through anaerobic digestion with the resulting production and utilisation of biogas and digestate and/or chemicals.

The economic activities in this category could be associated with several NACE codes, in particular E38.21 and F42.99 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  A monitoring and contingency plan is in place in order to minimise methane leakage at the facility.

2.  The produced biogas is used directly for the generation of electricity or heat, or upgraded to bio-methane for injection in the natural gas grid, or used as vehicle fuel or as feedstock in chemical industry.

3.  The bio-waste that is used for anaerobic digestion is source segregated and collected separately.

4.  The produced digestate is used as fertiliser or soil improver, either directly or after composting or any other treatment.

5.  In the dedicated bio-waste treatment plants, the share of food and feed crops (1) used as input feedstock, measured in weight, as an annual average, is less than or equal to 10 % of the input feedstock.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

For anaerobic digestion plants treating over 100 tonnes per day, emissions to air and water are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set for anaerobic treatment of waste in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for waste treatment (2). No significant cross-media effects occur.

The produced digestate meets the requirements for fertilising materials set out in Component Material Categories (CMC) 4 and 5 for digestate or CMC 3 for compost, as applicable, in Annex II to Regulation (EU) 2019/1009, or national rules on fertilisers or soil improvers for agricultural use

The Nitrogen content (with tolerance level ± 25 %) of the digestate used as fertiliser or soil improver is communicated to the buyer or the entity in charge of taking off the digestate.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

As defined in Article 2, point (40), of Directive (EU) 2018/2001.

(2)   

Implementing Decision (EU) 2018/1147.

5.8.    Composting of bio-waste

Description of the activity

Construction and operation of dedicated facilities for the treatment of separately collected bio-waste ( 30 ) through composting (aerobic digestion) with the resulting production and utilisation of compost.

The economic activities in this category could be associated with several NACE codes, in particular E38.21 and F42.99 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The bio-waste that is composted is source segregated and collected separately.

2.  The compost produced is used as fertiliser or soil improver and meets the requirements for fertilising materials set out in Component Material Category 3 in Annex II to Regulation (EU) 2019/1009 or national rules on fertilisers or soil improvers for agricultural use.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

For composting plants treating over 75 tonnes per day, emissions to air and water are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out for aerobic treatment of waste in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for waste treatment (1). No significant cross-media effects occur.

The site has a system in place that prevents leachate reaching groundwater.

The compost produced meets the requirements for fertilising materials set out in Component Material Category 3 in Annex II to Regulation (EU) 2019/1009 or national rules on fertilisers or soil improvers for agricultural use.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Implementing Decision (EU) 2018/1147.

5.9.    Material recovery from non-hazardous waste

Description of the activity

Construction and operation of facilities for the sorting and processing of separately collected non-hazardous waste streams into secondary raw materials involving mechanical reprocessing, except for backfilling purposes.

The economic activities in this category could be associated with several NACE codes, in particular E38.32 and F42.99 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity converts at least 50 %, in terms of weight, of the processed separately collected non-hazardous waste into secondary raw materials that are suitable for the substitution of virgin materials in production processes.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

5.10.    Landfill gas capture and utilisation

Description of the activity

Installation and operation of infrastructure for landfill ( 31 ) gas capture and utilisation in permanently closed landfills or landfill cells using new or supplementary dedicated technical facilities and equipment installed during or post landfill or landfill cell closure.

The economic activities in this category could be associated with NACE code E38.21 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The landfill has not been opened after 8 July 2020.

2.  The landfill or landfill cell where the gas capture system is newly installed, extended, or retrofitted is permanently closed and is not taking in further biodegradable waste (1).

3.  The produced landfill gas is used for the generation of electricity or heat as biogas (2), or upgraded to bio-methane for injection in the natural gas grid, or used as vehicle fuel or as feedstock in chemical industry.

4.  Methane emissions from the landfill and leakages from the landfill gas collection and utilisation facilities are subject to control and monitoring procedures set out in Annex III to Council Directive 1999/31/EC (3).

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The permanent closure and remediation as well as the after-care of old landfills, where the landfill gas capture system is installed, are carried out in accordance with the following rules:

(a)  general requirements set out in Annex I to Directive 1999/31/EC;

(b)  control and monitoring procedures set out in Annex III to that Directive.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

As set out in Article 5(3) of Directive 1999/31/EC.

(2)   

‘Biogas’ is defined in Article 2, point 28, of Directive (EU) 2018/2001.

(3)   

Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste (OJ L 182, 16.7.1999, p. 1).

5.11.    Transport of CO2

Description of the activity

Transport of captured CO2 via all modes.

Construction and operation of CO2 pipelines and retrofit of gas networks where the main purpose is the integration of captured CO2.

The economic activities in this category could be associated with several NACE codes, in particular F42.21 and H49.50 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

An economic activity in this category is an enabling activity in accordance with Article 10(1), point (i), of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The CO2 transported from the installation where it is captured to the injection point does not lead to CO2 leakages above 0.5 % of the mass of CO2 transported.

2.  The CO2 is delivered to a permanent CO2 storage site that meets the criteria for underground geological storage of CO2 set out in Section 5.12 of this Annex; or to other transport modalities, which lead to permanent CO2 storage site that meet those criteria.

3.  Appropriate leak detection systems are applied and a monitoring plan is in place, with the report verified by an independent third party.

4.  The activity may include the installation of assets that increase the flexibility and improve the management of an existing network..

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

5.12.    Underground permanent geological storage of CO2

Description of the activity

Permanent storage of captured CO2 in appropriate underground geological formations.

The economic activities in this category could be associated with NACE code E39.00 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  Characterisation and assessment of the potential storage complex and surrounding area, or exploration within the meaning of Article 3, point (8), of Directive 2009/31/EC of the European Parliament and of the Council (1) is carried out in order to establish whether the geological formation is suitable for use as a CO2 storage site.

2.  For operation of underground geological CO2 storage sites, including closure and post-closure obligations:

(a)  appropriate leakage detection systems are implemented to prevent release during operation;

(b)  a monitoring plan of the injection facilities, the storage complex, and, where appropriate, the surrounding environment is in place, with the regular reports checked by the competent national authority.

3.  For the exploration and operation of storage sites within the Union, the activity complies with Directive 2009/31/EC. For the exploration and operation of storage sites in third countries, the activity complies with ISO 27914:2017 (2) for geological storage of CO2.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

(4)  Transition to a circular economy

N/A

(5)  Pollution prevention and control

The activity complies with Directive 2009/31/EC.

(6)  Protection and restoration of biodiversity and ecosystems

The activity complies with the criteria set out in Appendix D to this Annex.

(1)   

Directive 2009/31/EC of the European Parliament and of the Council of 23 April 2009 on the geological storage of carbon dioxide and amending Council Directive 85/337/EEC, European Parliament and Council Directives 2000/60/EC, 2001/80/EC, 2004/35/EC, 2006/12/EC, 2008/1/EC and Regulation (EC) No 1013/2006 (OJ L 140, 5.6.2009, p. 114).

(2)   

ISO Standard 27914:2017, Carbon dioxide capture, transportation and geological storage — Geological storage (version of 4.6.2021: https://www.iso.org/standard/64148.html).

6.   TRANSPORT

6.1.    Passenger interurban rail transport

Description of the activity

Purchase, financing, rental, leasing and operation of passenger transport using railway rolling stock on mainline networks, spread over an extensive geographic area, passenger transport by interurban railways and operation of sleeping cars or dining cars as an integrated operation of railway companies.

The economic activities in this category could be associated with several NACE codes, in particular H49.10, N77.39 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Where an economic activity in this category does not fulfil the substantial contribution criterion specified in point (a) of this Section, that activity is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852, provided it complies with the remaining technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity complies with one of the following criteria:

(a)  the trains and passenger coaches have zero direct (tailpipe) CO2 emissions;

(b)  the trains and passenger coaches have zero direct (tailpipe) CO2 emission when operated on a track with necessary infrastructure, and use a conventional engine where such infrastructure is not available (bimode).

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

Measures are in place to manage waste in accordance with the waste hierarchy, in particular during maintenance.

(5)  Pollution prevention and control

Engines for the propulsion of railway locomotives (RLL) and engines for the propulsion of railcars (RLR) comply with emission limits set out in Annex II to Regulation (EU) 2016/1628 of the European Parliament and of the Council (1).

(6)  Protection and restoration of biodiversity and ecosystems

N/A

(1)   

Regulation (EU) 2016/1628 of the European Parliament and of the Council of 14 September 2016 on requirements relating to gaseous and particulate pollutant emission limits and type-approval for internal combustion engines for non-road mobile machinery, amending Regulations (EU) No 1024/2012 and (EU) No 167/2013, and amending and repealing Directive 97/68/EC (OJ L 252, 16.9.2016, p. 53).

6.2.    Freight rail transport

Description of the activity

Purchase, financing, leasing, rental and operation of freight transport on mainline rail networks as well as short line freight railroads.

The economic activities in this category could be associated with several NACE codes, in particular H49.20 and N77.39 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Where an economic activity in this category does not fulfil the substantial contribution criterion specified in point (a) of this Section, that activity is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852, provided it complies with the remaining technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The activity complies with one or both of the following criteria:

(a)  the trains and wagons have zero direct tailpipe CO2 emission;

(b)  the trains and wagons have zero direct tailpipe CO2 emission when operated on a track with necessary infrastructure, and use a conventional engine where such infrastructure is not available (bimode).

2.  The trains and wagons are not dedicated to the transport of fossil fuels.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

Measures are in place to manage waste, in accordance with the waste hierarchy, in particular during maintenance.

(5)  Pollution prevention and control

Engines for the propulsion of railway locomotives (RLL) and engines for the propulsion of railcars (RLR) comply with emission limits set out in Annex II to Regulation (EU) 2016/1628.

(6)  Protection and restoration of biodiversity and ecosystems

N/A

6.3.    Urban and suburban transport, road passenger transport

Description of the activity

Purchase, financing, leasing, rental and operation of urban and suburban transport vehicles for passengers and road passenger transport.

For motor vehicles, operation of vehicles designated as category M2 or M3, in accordance with Article 4(1) of Regulation (EU) 2018/858, for the provision of passenger transport.

The economic activities in this category may include operation of different modes of land transport, such as by motor bus, tram, streetcar, trolley bus, underground and elevated railways. This also includes town-to-airport or town-to-station lines and operation of funicular railways and aerial cableways where part of urban or suburban transit systems.

The economic activities in this category also include scheduled long-distance bus services, charters, excursions and other occasional coach services, airport shuttles (including within airports), operation of school buses and buses for the transport.

The economic activities in this category could be associated with several NACE codes, in particular H49.31, H49.3.9, N77.39 and N77.11 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Where an economic activity in this category does not fulfil the substantial contribution criterion specified in point (a) of this Section, the activity is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852, provided it complies with the remaining technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity complies with the one of following criteria:

(a)  the activity provides urban or suburban passenger transport and its direct (tailpipe) CO2 emissions are zero (1);

(b)  until 31 December 2025, the activity provides interurban passenger road transport using vehicles designated as categories M2 and M3 (2) that have a type of bodywork classified as ‘CA’ (single-deck vehicle), ‘CB’ (double-deck vehicle), ‘CC’ (single-deck articulated vehicle) or ‘CD’ (double-deck articulated vehicle) (3), and comply with the latest EURO VI standard, i.e. both with the requirements of Regulation (EC) No 595/2009 and, from the time of the entry into force of amendments to that Regulation, in those amending acts, even before they become applicable, and with the latest step of the Euro VI standard set out in Table 1 of Appendix 9 to Annex I to Regulation (EU) No 582/2011 where the provisions governing that step have entered into force but have not yet become applicable for this type of vehicle (4). Where such standard is not available, the direct CO2 emissions of the vehicles are zero.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

Measures are in place to manage waste, in accordance with the waste hierarchy, both in the use phase (maintenance) and the end-of-life of the fleet, including through reuse and recycling of batteries and electronics (in particular critical raw materials therein).

▼M2

(5)  Pollution prevention and control

For road vehicles of category M, tyres comply with external rolling noise requirements in the highest populated class and with Rolling Resistance Coefficient (influencing the vehicle energy efficiency) in the highest two populated classes as set out in Regulation (EU) 2020/740 and as can be verified from the European Product Registry for Energy Labelling (EPREL).

Where applicable, vehicles comply with the requirements of the most recent applicable stage of the Euro VI heavy duty emission type-approval set out in accordance with Regulation (EC) No 595/2009.

▼B

(6)  Protection and restoration of biodiversity and ecosystems

N/A

(1)   

This includes Motor buses with type of bodywork classified as ‘CE’ (low-floor single-deck vehicle), ‘CF’ (low-floor double-deck vehicle), ‘CG’ (Articulated low-floor single-deck vehicle), ‘CH’ (Articulated low-floor double-deck vehicle), ‘CI’ (open top single deck vehicle) or ‘CJ’ (open top double deck vehicle), as set out in point 3 of part C of Annex I to Regulation (EU) 2018/858.

(2)   

As referred to in Article 4(1), point (a), of Regulation (EU) 2018/858.

(3)   

As set out in point 3 of part C of Annex I to Regulation (EU) 2018/858.

(4)   

Until 31/12/2021, the EURO VI, step E as set out in Regulation (EC) No 595/2009.

6.4.    Operation of personal mobility devices, cycle logistics

Description of the activity

Selling, purchasing, financing, leasing, renting and operation of personal mobility or transport devices where the propulsion comes from the physical activity of the user, from a zero-emissions motor, or a mix of zero-emissions motor and physical activity. This includes the provision of freight transport services by (cargo) bicycles.

The economic activities in this category could be associated with several NACE codes, in particular N77.11 and N77.21 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The propulsion of personal mobility devices comes from the physical activity of the user, from a zero-emissions motor, or a mix of zero-emissions motor and physical activity.

2.  The personal mobility devices are allowed to be operated on the same public infrastructure as bikes or pedestrians.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

Measures are in place to manage waste, in accordance with the waste hierarchy, both in the use phase (maintenance) and the end-of-life, including through reuse and recycling of batteries and electronics (in particular critical raw materials therein).

(5)  Pollution prevention and control

N/A

(6)  Protection and restoration of biodiversity and ecosystems

N/A

6.5.    Transport by motorbikes, passenger cars and light commercial vehicles

Description of the activity

Purchase, financing, renting, leasing and operation of vehicles designated as category M1 ( 32 ), N1 ( 33 ), both falling under the scope of Regulation (EC) No 715/2007 of the European Parliament and of the Council ( 34 ), or L (2- and 3-wheel vehicles and quadricycles) ( 35 ).

The economic activities in this category could be associated with several NACE codes, in particular H49.32, H49.39 and N77.11 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Where an economic activity in this category does not fulfil the substantial contribution criterion specified in point (a)(ii) and (b) of this Section, the activity is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852, provided it complies with the remaining technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity complies with the following criteria:

(a)  for vehicles of category M1 and N1, both falling under the scope of Regulation (EC) No 715/2007:

(i)  until 31 December 2025, specific emissions of CO2, as defined in Article 3(1), point (h), of Regulation (EU) 2019/631, are lower than 50 g CO2/km (low- and zero-emission light-duty vehicles);

(ii)  from 1 January 2026, specific emissions of CO2, as defined in Article 3(1), point (h), of Regulation (EU) 2019/631, are zero.

(b)  for vehicles of category L, the tailpipe CO2 emissions equal to 0 g CO2e/km calculated in accordance with the emission test laid down in Regulation (EU) 168/2013.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

Vehicles of categories M1 and N1 are both of the following:

(a)  reusable or recyclable to a minimum of 85 % by weight;

(b)  reusable or recoverable to a minimum of 95 % by weight (1).

Measures are in place to manage waste both in the use phase (maintenance) and the end-of-life of the fleet, including through reuse and recycling of batteries and electronics (in particular critical raw materials therein), in accordance with the waste hierarchy.

▼M2

(5)  Pollution prevention and control

Vehicles comply with the requirements of the most recent applicable stage of the Euro 6 light-duty emission type-approval (2) set out in accordance with Regulation (EC) No 715/2007.

Vehicles comply with the emission thresholds for clean light-duty vehicles set out in Table 2 of the Annex to Directive 2009/33/EC of the European Parliament and of the Council (3).

For road vehicles of categories M and N, tyres comply with external rolling noise requirements in the highest populated class and with Rolling Resistance Coefficient (influencing the vehicle energy efficiency) in the highest two populated classes as set out in Regulation (EU) 2020/740 and as can be verified from the European Product Registry for Energy Labelling (EPREL).

Vehicles comply with Regulation (EU) No 540/2014 of the European Parliament and of the Council (4).

▼B

(6)  Protection and restoration of biodiversity and ecosystems

N/A

(1)   

As set out in Annex I of Directive 2005/64/EC of the European Parliament and of the Council of 26 October 2005 on the type-approval of motor vehicles with regard to their reusability, recyclability and recoverability and amending Council Directive 70/156/EEC (OJ L 310, 25.11.2005, p. 10).

(2)   

Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (OJ L 301, 27.11.2018, p. 1).

(3)   

Directive 2009/33/EC of the European Parliament and of the Council of 23 April 2009 on the promotion of clean and energy-efficient road transport vehicles (OJ L 120, 15.5.2009, p. 5).

(4)   

Regulation (EU) No 540/2014 of the European Parliament and of the Council of 16 April 2014 on the sound level of motor vehicles and of replacement silencing systems, and amending Directive 2007/46/EC and repealing Directive 70/157/EEC (OJ L 158, 27.5.2014, p. 131).

6.6.    Freight transport services by road

Description of the activity

Purchase, financing, leasing, rental and operation of vehicles designated as category N1, N2 ( 36 ) or N3 ( 37 ) falling under the scope of EURO VI ( 38 ), step E or its successor, for freight transport services by road.

The economic activities in this category could be associated with several NACE codes, in particular H49.4.1, H53.10, H53.20 and N77.12 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Where an economic activity in this category does not fulfil the substantial contribution criterion specified in point (1)(a), (1)( b) or (1)(c)(i) of this Section, the activity is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852, provided it complies with the remaining technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The activity complies with one of the following criteria:

(a)  vehicles of category N1 have zero direct (tailpipe) CO2 emissions;

(b)  vehicles of category N2 and N3 with a technically permissible maximum laden mass not exceeding 7,5 tonnes are ‘zero-emission heavy-duty vehicles’ as defined in Article 3, point (11), of Regulation (EU) 2019/1242;

(c)  vehicles of category N2 and N3 with a technically permissible maximum laden mass exceeding 7,5 tonnes are one of the following:

(i)  ‘zero-emission heavy-duty vehicles’, as defined in Article 3, point (11), of Regulation (EU) 2019/1242;

(ii)  where technologically and economically not feasible to comply with the criterion in point (i), ‘low-emission heavy-duty vehicles’ as defined in Article 3, point (12), of that Regulation.

2.  Vehicles are not dedicated to the transport of fossil fuels.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

N/A

(4)  Transition to a circular economy

Vehicles of category N1, N2 and N3 are both of the following:

(a)  reusable or recyclable to a minimum of 85 % by weight;

(b)  reusable or recoverable to a minimum of 95 % by weight (1).

Measures are in place to manage waste both in the use phase (maintenance) and the end-of-life of the fleet, including through reuse and recycling of batteries and electronics (in particular critical raw materials therein), in accordance with the waste hierarchy.

▼M2

(5)  Pollution prevention and control

For road vehicles of categories M and N, tyres comply with external rolling noise requirements in the highest populated class and with Rolling Resistance Coefficient (influencing the vehicle energy efficiency) in the highest two populated classes as set out in Regulation (EU) 2020/740 and as can be verified from the European Product Registry for Energy Labelling (EPREL). Vehicles comply with the requirements of the most recent applicable stage of the Euro VI heavy duty emission type-approval (2) set out in accordance with Regulation (EC) No 595/2009.

Vehicles comply with Regulation (EU) No 540/2014.

▼B

(6)  Protection and restoration of biodiversity and ecosystems

N/A

(1)   

As set out in Annex I to Directive 2005/64/EC.

(2)   

Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (OJ L 167, 25.6.2011, p. 1).

6.7.    Inland passenger water transport

Description of the activity

Purchase, financing, leasing, rental and operation of passenger vessels on inland waters, involving vessels that are not suitable for sea transport.

The economic activities in this category could be associated with NACE code H50.30 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Where an economic activity in this category does not fulfil the substantial contribution criterion specified in point (a) of this Section, the activity is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852, provided it complies with the remaining technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

The activity complies with one of the following criteria:
(a)  the vessels have zero direct (tailpipe) CO2 emissions;
(b)  until 31 December 2025, hybrid and dual fuel vessels derive at least 50 % of their energy from zero direct (tailpipe) CO2 emission fuels or plug-in power for their normal operation; ►M2  
(c)  where technologically and economically not feasible to comply with point (a), from 1 January 2026 onwards the yearly average greenhouse gas intensity of the energy used on-board by a ship during a reporting period (1) does not exceed the following limits:
(a)  76,4 g CO2e/MJ from 1 January 2026 until 31 December 2029;
(b)  61,1 g CO2e/MJ from 1 January 2030 until 31 December 2034;
(c)  45,8 g CO2e/MJ from 1 January 2035 until 31 December 2039;
(d)  30,6 g CO2e/MJ from 1 January 2040 until 31 December 2044;
(e)  15,3 g CO2e/MJ from 1 January 2045 until 31 December 2049;
(f)  0 g CO2e/MJ from 1 January 2050.  ◄

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

▼M2

(4)  Transition to a circular economy

Measures are in place to manage and recycle waste at the end-of life, including through decommissioning contractual agreements with recycling service providers, reflection in financial projections or official project documentation. These measures ensure that components and materials are segregated and treated to maximise recycling and reuse in accordance with the waste hierarchy, EU waste regulation principles and applicable regulations, in particular through the reuse and recycling of batteries and electronics and the critical raw materials therein. These measures also include the control and management of hazardous materials.

Measures are in place to prevent the generation of waste in the use phase (maintenance, operation of transport services with regards to catering waste) and to manage any remaining waste in accordance with the waste hierarchy.

▼B

(5)  Pollution prevention and control

Engines in vessels comply with emission limits set out in Annex II to Regulation (EU) 2016/1628 (including vessels meeting those limits without type-approved solutions such as through after-treatment).

(6)  Protection and restoration of biodiversity and ecosystems

N/A

(1)   

The greenhouse gas intensity of the energy used on-board by a ship is verified by an independent third party and calculated as the amount of greenhouse gas emissions per unit of energy according to the methodology and default values specified in a Regulation of the European Parliament and of the Council on the use of renewable and low-carbon fuels in maritime transport and amending Directive 2009/16/EC.

6.8.    Inland freight water transport

Description of the activity

Purchase, financing, leasing, rental and operation of freight vessels on inland waters, involving vessels that are not suitable for sea transport.

The economic activities in this category could be associated with several NACE code H50.4 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006.

Where an economic activity in this category does not fulfil the substantial contribution criterion specified in point (a) of this Section, the activity is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852, provided it complies with the remaining technical screening criteria set out in this Section.

Technical screening criteria



Substantial contribution to climate change mitigation

1.  The activity complies with one or both of the following criteria:

(a)  the vessels have zero direct (tailpipe) CO2 emission;
(b)  where technologically and economically not feasible to comply with the criterion in point (a), until 31 December 2025, the vessels have direct (tailpipe) emissions of CO2 per tonne kilometre (g CO2/tkm), calculated (or estimated in case of new vessels) using the Energy Efficiency Operational Indicator (1), 50 % lower than the average reference value for emissions of CO2 defined for heavy duty vehicles (vehicle subgroup 5- LH) in accordance with Article 11 of Regulation 2019/1242; ►M2  
(c)  where technologically and economically not feasible to comply with point (a), from 1 January 2026 onwards, the yearly average greenhouse gas intensity of the energy used on-board by a ship or a company’s fleet during a reporting period (2) does not exceed the following limits:
(a)  76,4 g CO2e/MJ from 1 January 2026 until 31 December 2029;
(b)  61,1 g CO2e/MJ from 1 January 2030 until 31 December 2034;
(c)  45,8 g CO2e/MJ from 1 January 2035 until 31 December 2039;
(d)  30,6 g CO2e/MJ from 1 January 2040 until 31 December 2044;
(e)  15,3 g CO2e/MJ from 1 January 2045 until 31 December 2049;
(f)  0 g CO2e/MJ from 1 January 2050.  ◄

2.  Vessels are not dedicated to the transport of fossil fuels.

Do no significant harm (‘DNSH’)

(2)  Climate change adaptation

The activity complies with the criteria set out in Appendix A to this Annex.

(3)  Sustainable use and protection of water and marine resources

The activity complies with the criteria set out in Appendix B to this Annex.

▼M2

(4)  Transition to a circular economy