EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 02014R0065-20170307

Consolidated text: Commission Delegated Regulation (EU) No 65/2014 of 1 October 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods (Text with EEA relevance)

ELI: http://data.europa.eu/eli/reg_del/2014/65/2017-03-07

02014R0065 — EN — 07.03.2017 — 001.001


This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document

►B

COMMISSION DELEGATED REGULATION (EU) No 65/2014

of 1 October 2013

supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods

(Text with EEA relevance)

(OJ L 029 31.1.2014, p. 1)

Amended by:

 

 

Official Journal

  No

page

date

►M1

COMMISSION DELEGATED REGULATION (EU) 2017/254 of 30 November 2016

  L 38

1

15.2.2017


Corrected by:

►C1

Corrigendum, OJ L 061, 5.3.2015, p.  26 (65/2014)




▼B

COMMISSION DELEGATED REGULATION (EU) No 65/2014

of 1 October 2013

supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods

(Text with EEA relevance)



Article 1

Subject matter and scope

1.  
This Regulation establishes requirements for the labelling and the provision of supplementary product information for domestic electric and gas ovens (including when incorporated into cookers) and for domestic electric range hoods, including when sold for non-domestic purposes.
2.  

This Regulation shall not apply to:

(a) 

ovens that use energy sources other than electricity or gas;

(b) 

ovens which offer a ‘microwave heating’ function;

(c) 

small ovens;

(d) 

portable ovens;

(e) 

heat storage ovens;

(f) 

ovens which are heated with steam as a primary heating function;

(g) 

ovens designed for use only with gases of the ‘third family’ (propane and butane).

Article 2

Definitions

In addition to the definitions set out in Article 2 of Directive 2010/30/EU, the following definitions shall apply for the purposes of this Regulation:

(1) 

‘oven’ means an appliance or part of an appliance which incorporates one or more cavities using electricity and/or gas in which food is prepared by use of a conventional or fan-forced mode;

(2) 

‘cavity’ means the enclosed compartment in which the temperature can be controlled for preparation of food;

(3) 

‘multi-cavity oven’ means an oven with two or more cavities, each of which is heated separately;

(4) 

‘small oven’ means an oven where all cavities have a width and depth of less than 250 mm or a height less than 120 mm;

(5) 

‘portable oven’ means an oven with a product mass of less than 18 kilograms, provided it is not designed for built-in installations;

(6) 

‘microwave heating’ means heating of food using electromagnetic energy;

(7) 

‘conventional mode’ means the operation mode of an oven only using natural convection for circulation of heated air inside the cavity of the oven;

(8) 

‘fan-forced mode’ means a mode of an oven when a built-in fan circulates heated air inside the cavity of the oven;

(9) 

‘cycle’ means the period of heating a standardised load in a cavity of an oven under defined conditions;

(10) 

‘cooker’ means an appliance consisting of an oven and a hob using gas or electricity;

(11) 

‘operation mode’ means the status of an oven during use;

(12) 

‘heat source’ means the main energy form for heating an oven;

(13) 

‘range hood’ means an appliance, operated by a motor which it controls, intended to collect contaminated air from above a hob, or which includes a downdraft system intended for installation adjacent to cooking ranges, hobs and similar cooking products, that draws vapour down into an internal exhaust duct;

(14) 

‘automatic functioning mode during the cooking period’ means a condition in which the air flow of the range hood during the cooking period is automatically controlled through sensor(s), including as regards humidity, temperature, etc.;

(15) 

‘fully automatic range hood’ means a range hood in which the air flow and/or other functions are automatically controlled through sensor(s) during 24 hours including the cooking period;

(16) 

‘best efficiency point’ (BEP) means the range hood operating point with maximum fluid dynamic efficiency (FDEhood);

(17) 

‘lighting efficiency’ (LEhood) means the ratio between the average illumination of the lighting system of the domestic range hood and the power of the lighting system in lux/W;

(18) 

‘grease filtering efficiency’ (GFEhood) means the relative share of grease retained within the range hood grease filters;

(19) 

‘off mode’ means a condition in which the appliance is connected to the mains power source but is not providing any function or only provides an indication of off mode condition, or only provides functionalities intended to ensure electromagnetic compatibility pursuant to Directive 2004/108/EC of the European Parliament and of the Council ( 1 );

(20) 

‘standby mode’ means a condition where the appliance is connected to the mains power source, depends on energy input from the mains power source to work as intended and provides only reactivation function, or reactivation function and only an indication of enabled reactivation function, and/or information or status display which may persist for an indefinite time;

(21) 

‘reactivation function’ means a function facilitating the activation of other modes, including the active mode, by remote switch including remote control, internal sensor, or timer to a condition providing additional functions, including the main function;

(22) 

‘information or status display’ means a continuous function providing information or indicating the status of the equipment on a display, including clocks;

(23) 

‘end-user’ means a consumer buying or expected to buy a product;

(24) 

‘point of sale’ means a location where appliances are displayed and/or offered for sale or hire;

(25) 

‘equivalent model’ means a model placed on the market with the same technical parameters as another model placed on the market under a different commercial code number by the same manufacturer or importer.

Article 3

Responsibilities of suppliers and timetable

Suppliers shall ensure that:

(1) 

as regards labels, fiches and technical documentation

(a) 

for domestic ovens:

(i) 

each domestic oven is supplied with (a) printed label(s) containing information in the format set out in point 1 of Annex III for each cavity of the oven;

(ii) 

a product fiche, as set out in point A of Annex IV, is made available for domestic ovens placed on the market;

(iii) 

the technical documentation, as set out in point A of Annex V, is made available on request to the authorities of the Member States;

(iv) 

any advertisement for a specific model of domestic oven contains the energy efficiency class, if the advertisement discloses energy-related or price information;

(v) 

any technical promotional material concerning a specific model of domestic oven which describes its specific technical parameters includes the energy efficiency class of that model;

(vi) 

an electronic label in the format and containing the information set out in point 1 of Annex III is made available to dealers for each cavity of each domestic oven model;

(vii) 

an electronic product fiche as set out in point A of Annex IV is made available to dealers for each domestic oven model;

(b) 

for domestic range hoods:

(i) 

each domestic range hood is supplied with a printed label containing information in the format set out in point 2 of Annex III;

(ii) 

a product fiche, as set out in point B of Annex IV, is made available for domestic range hoods placed on the market;

(iii) 

the technical documentation as set out in point B of Annex V, is made available on request to the authorities of the Member States;

(iv) 

any advertisement for a specific model of domestic range hood contains the energy efficiency class, if the advertisement discloses energy-related or price information;

(v) 

any technical promotional material concerning a specific model of domestic range hood which describes its specific technical parameters includes the energy efficiency class of that model;

(vi) 

an electronic label in the format and containing the information set out in point 2 of Annex III is made available to dealers for each domestic range hood model;

(vii) 

an electronic product fiche as set out in point B of Annex IV is made available to dealers for each domestic range hood model;

(2) 

as regards efficiency classes:

(a) 

for domestic ovens, the energy efficiency class of the cavity of the oven shall be determined in accordance with point 1 of Annex I, and point 1 of Annex II;

(b) 

for domestic range hoods:

(i) 

the energy efficiency classes shall be determined in accordance with point 2(a) of Annex I and point 2.1 of Annex II;

(ii) 

the fluid dynamic efficiency classes shall be determined in accordance with point 2(b) of Annex I and point 2.2 of Annex II;

(iii) 

the lighting efficiency classes shall be determined in accordance with point 2(c) of Annex I and point 2.3 of Annex II;

(iv) 

the grease filtering efficiency classes shall be determined in accordance with point 2(d) of Annex I and point 2.4 of Annex II;

(3) 

as regards formats of the labels:

(a) 

for domestic ovens, the format of the label for the cavity of the oven shall be as set out in point 1 of Annex III, for appliances placed on the market from 1 January 2015;

(b) 

for domestic range hoods, the format of the label shall be as set out in point 2 of Annex III, according to the following timetable:

(i) 

for domestic range hoods placed on the market from 1 January 2015 with energy efficiency classes A, B, C, D, E, F and G, labels shall be in accordance with point 2.1.1 of Annex III (Label 1) or, where suppliers deem appropriate, with point 2.1.2 of that Annex (Label 2);

(ii) 

for domestic range hoods placed on the market from 1 January 2016 with energy efficiency classes A+, A, B, C, D, E and F, labels shall be in accordance with point 2.1.2 of Annex III (Label 2) or, where suppliers deem appropriate, with point 2.1.3 of that Annex (Label 3);

(iii) 

for domestic range hoods placed on the market from 1 January 2018 with energy efficiency classes A++, A+, A, B, C, D and E, labels shall be in accordance with point 2.1.3 of Annex III (Label 3) or, where suppliers deem appropriate, with point 2.1.4 of that Annex (Label 4);

(iv) 

for domestic range hoods placed on the market from 1 January 2020 with energy efficiency classes A+++, A++, A+, A, B, C and D, labels shall be in accordance with point 2.1.4 of Annex III (Label 4).

Article 4

Responsibilities of dealers

Dealers shall ensure that:

(1) 

for domestic ovens:

(a) 

each oven presented at the point of sale carries the label for each cavity provided by suppliers in accordance with Article 3(1)(a)(i) displayed on the front or top of the appliance, or in the immediacy of the appliance, so as to be clearly visible and identifiable as the label belonging to the model without having to read the brand name and model number on the label;

(b) 

ovens offered for sale or hire where the end-user cannot be expected to see the product displayed, as specified in Article 7 of Directive 2010/30/EU, are marketed with the information provided by suppliers in accordance with Part A of Annex VI to this Regulation, except where the offer is made through the internet in which case the provisions of Annex VII shall apply;

(c) 

any advertisement for any form or medium of distance selling and marketing concerning a specific model of oven contains a reference to the energy efficiency class, if the advertisement discloses energy-related or price information;

(d) 

any technical promotional material concerning a specific model which describes the technical parameters of an oven includes the energy efficiency class of the model;

(2) 

for domestic range hoods:

(a) 

each domestic range hood presented at the point of sale is accompanied by the label provided by suppliers in accordance with Article 3(1)(b)(i) displayed on the front or top of the appliance, or in the immediacy of the appliance, so as to be clearly visible and identifiable as the label belonging to the model without having to read the brand name and model number on the label;

(b) 

domestic range hoods offered for sale or hire where the end-user cannot be expected to see the product displayed, as specified in Article 7 of Directive 2010/30/EU, are marketed with the information provided by suppliers in accordance with Part B of Annex VI to this Regulation, except where the offer is made through the internet in which case the provisions of Annex VII shall apply;

(c) 

any advertisement for any form or medium of distance selling and marketing concerning a specific model of domestic range hood contains a reference to the energy efficiency class, if the advertisement discloses energy-related or price information;

(d) 

any technical promotional material concerning a specific model which describes the technical parameters of a domestic range hood includes the energy efficiency class of the model.

Article 5

Measurement and calculation methods

The information to be provided under Articles 3 and 4 shall be obtained by reliable, accurate and reproducible measurement procedures, which take into account the recognised state-of-the-art calculation and measurement methods.

Article 6

Verification procedure for market surveillance purposes

When performing the market surveillance checks for compliance with requirements set out in this Regulation, the Member States’ authorities shall apply the verification procedure described in Annex VIII.

Article 7

Review

The Commission shall review this Regulation in the light of technological progress no later than 1 January 2021.

Article 8

Repeal

Commission Directive 2002/40/EC shall be repealed from 1 January 2015.

Article 9

Transitional provisions

1.  
Domestic ovens which comply with the provisions of this Regulation and which are placed on the market or offered for sale, hire or hire-purchase before 1 January 2015 shall be regarded as complying with the requirements of Directive 2002/40/EC.
2.  
From 1 January to 1 April 2015, dealers may apply Article 4(1)(b) to specific ovens that fall under that provision.
3.  
From 1 January to 1 April 2015, dealers may apply Article 4(2)(b) to specific range hoods that fall under that provision.

Article 10

Entry into force and application

1.  
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
2.  
It shall apply from 1 January 2015. However, Article 3(1)(a)(iv) and (v), Article 3(1)(b)(iv) and (v), Article 4(1)(b), (c) and (d), and Article 4(2)(b), (c) and (d) shall apply from 1 April 2015.

This Regulation shall be binding in its entirety and directly applicable in all Member States.




ANNEX I

Efficiency classes

1.   DOMESTIC OVENS

The energy efficiency classes of domestic ovens shall be determined separately for each cavity in accordance with values as set out in Table 1 of this Annex. The energy efficiency of ovens shall be determined in accordance with point 1 of Annex II.



Table 1

Energy efficiency classes of domestic ovens

Energy Efficiency Class

Energy Efficiency Index (EEIcavity)

A+++ (most efficient)

EEIcavity < 45

A++

45 ≤ EEIcavity < 62

A+

62 ≤ EEIcavity < 82

A

82 ≤ EEIcavity < 107

B

107 ≤ EEIcavity < 132

C

132 ≤ EEIcavity < 159

D (least efficient)

EEIcavity ≥ 159

2.   DOMESTIC RANGE HOODS

(a) 

The energy efficiency classes of domestic range hoods shall be determined in accordance with values as set out in Table 2 of this Annex. The Energy Efficiency Index (EEIhood) of domestic range hoods shall be calculated in accordance with point 2.1 of Annex II.



Table 2

Energy efficiency classes of domestic range hoods

Energy Efficiency Class

Energy Efficiency Index (EEIhood)

Label 1

Label 2

Label 3

Label 4

A+++ (most efficient)

 

 

 

EEIhood < 30

A++

 

 

EEIhood < 37

30 ≤ EEIhood < 37

A+

 

EEIhood < 45

37 ≤ EEIhood < 45

37 ≤ EEIhood < 45

A

EEIhood < 55

45 ≤ EEIhood < 55

45 ≤ EEIhood < 55

45 ≤ EEIhood < 55

B

55 ≤ EEIhood < 70

55 ≤ EEIhood < 70

55 ≤ EEIhood < 70

55 ≤ EEIhood < 70

C

70 ≤ EEIhood < 85

70 ≤ EEIhood < 85

70 ≤ EEIhood < 85

70 ≤ EEIhood < 85

D

85 ≤ EEIhood < 100

85 ≤ EEIhood < 100

85 ≤ EEIhood < 100

EEIhood ≥ 85

E

100 ≤ EEIhood < 110

100 ≤ EEIhood < 110

EEIhood ≥ 100

 

F

110 ≤ EEIhood < 120

EEIhood ≥ 110

 

 

G (least efficient)

EEIhood ≥ 120

 

 

 

(b) 

The fluid dynamic efficiency classes of a domestic range hood shall be determined in accordance with its Fluid Dynamic Efficiency (FDEhood) as in the following Table 3. The Fluid Dynamic Efficiency of domestic range hoods shall be determined in accordance with point 2.2 of Annex II.



Table 3

Fluid Dynamic Efficiency classes for domestic range hoods

Fluid Dynamic Efficiency Class

Fluid Dynamic Efficiency (FDEhood)

A (most efficient)

FDEhood > 28

B

23 < FDEhood ≤ 28

C

18 < FDEhood ≤ 23

D

13 < FDEhood ≤ 18

E

8 < FDEhood ≤ 13

F

4 < FDEhood ≤ 8

G (least efficient)

FDEhood ≤ 4

(c) 

The lighting efficiency classes of a domestic range hood shall be determined in accordance with its Lighting Efficiency (LEhood) as in the following Table 4. The Lighting Efficiency of domestic range hoods shall be determined in accordance with point 2.3 of Annex II.



Table 4

Lighting Efficiency classes for domestic range hoods

Lighting Efficiency Class

Lighting Efficiency (LEhood)

A (most efficient)

LEhood > 28

B

20 < LEhood ≤ 28

C

16 < LEhood ≤ 20

D

12 < LEhood ≤ 16

E

8 < LEhood ≤ 12

F

4 < LEhood ≤ 8

G (least efficient)

LEhood ≤ 4

(d) 

The grease filtering efficiency classes of a domestic range hood shall be determined in accordance with its Grease Filtering Efficiency (GFEhood) as in the following Table 5. The Grease Filtering Efficiency of domestic range hoods shall be determined in accordance with point 2.4 of Annex II.



Table 5

Grease Filtering Efficiency (GFEhood) classes for domestic range hoods

Grease Filtering Efficiency Class

Grease Filtering Efficiency (%)

A (most efficient)

GFEhood > 95

B

85 < GFEhood ≤ 95

C

75 < GFEhood ≤ 85

D

65 < GFEhood ≤ 75

E

55 < GFEhood ≤ 65

F

45 < GFEhood ≤ 55

G (least efficient)

GFEhood ≤ 45




ANNEX II

Measurements and calculations

For the purposes of compliance and verification of compliance with the requirements of this Regulation, measurements and calculations shall be made using a reliable, accurate and reproducible method that take into account the generally recognised state-of-the-art measurement and calculation methods, including harmonised standards the reference numbers of which have been published for the purpose in the Official Journal of the European Union. They shall meet the technical definitions, conditions, equations and parameters set out in this Annex.

1.   DOMESTIC OVENS

The energy consumption of a cavity of a domestic oven shall be measured for one standardised cycle, in a conventional mode and in a fan-forced mode, if available, by heating a standardised load soaked with water. It shall be verified that the temperature inside the oven cavity reaches the temperature setting of the thermostat and/or the oven control display within the duration of the test cycle. The energy consumption per cycle corresponding to the best performing mode (conventional mode or fan-forced mode) shall be used in the following calculations.

For each cavity of a domestic oven, the Energy Efficiency Index (EEIcavity) shall be calculated according to the following formulas:

for domestic electric ovens:

image

image

(in kWh)

for domestic gas ovens:

image

image

(in MJ)

Where:

EEIcavity = Energy Efficiency Index for each cavity of a domestic oven, in %, rounded to the first decimal place,

SECelectric cavity = Standard Energy Consumption (electricity) required to heat a standardised load in a cavity of an electric heated domestic oven during a cycle, expressed in kWh, rounded to the second decimal place,

SECgas cavity = Standard Energy Consumption required to heat a standardised load in a cavity of a domestic gas-fired oven during a cycle, expressed in MJ, rounded to the second decimal place,

V = Volume of the cavity of the domestic oven in litres (L), rounded to the nearest integer,

ECelectric cavity = Energy consumption required to heat a standardised load in a cavity of an electric heated domestic oven during a cycle, expressed in kWh, rounded to the second decimal place,

ECgas cavity = Energy consumption required to heat a standardised load in a gas-fired cavity of a domestic oven during a cycle, expressed in MJ, rounded to the second decimal place.

2.   DOMESTIC RANGE HOODS

2.1.    Calculation of the Energy Efficiency Index (EEIhood)

The Energy Efficiency Index (EEIhood ) is calculated as:

image

and is rounded to the first decimal place.

Where:

— 
SAEChood is the Standard Annual Energy consumption of the domestic range hood in kWh/a, rounded to the first decimal place,
— 
AEChood is the Annual Energy Consumption of the domestic range hood in kWh/a, rounded to the first decimal place.

The Standard Annual Energy Consumption (SAEChood ) of a domestic range hood shall be calculated as:

image

Where:

— 
WBEP is the electric power input of the domestic range hood at the best efficiency point, in Watt and rounded to the first decimal place,
— 
WL is the nominal electric power input of the lighting system of the domestic range hood on the cooking surface, in Watt and rounded to the first decimal place.

The Annual Energy Consumption (AEChood ) of a domestic range hood is calculated as:

(i) 

for the fully automatic domestic range hoods:

▼C1

image

▼B

(ii) 

for all other domestic range hoods:

image

Where:

— 
tL is the average lighting time per day, in minutes (tL = 120),
— 
tH is the average running time per day for domestic range hoods, in minutes (tH = 60),
— 
Po is the electric power input in off-mode of the domestic range hood, in Watt and rounded to the second decimal place,
— 
Ps is the electric power input in standby mode of the domestic range hood, in Watt and rounded to the second decimal place,
— 
f is the time increase factor, calculated and rounded to the first decimal place, as:

image

2.2.    Calculation of the Fluid Dynamic Efficiency (FDEhood)

The Fluid Dynamic Efficiency (FDEhood ) at the best efficiency point is calculated by the following formula, and is rounded to the first decimal place:

image

Where:

— 
QBEP is the flow rate of the domestic range hood at best efficiency point, expressed in m3/h and rounded to the first decimal place,
— 
PBEP is the static pressure difference of the domestic range hood at best efficiency point, expressed in Pa and rounded to the nearest integer,
— 
WBEP is the electric power input of the domestic range hood at the best efficiency point, expressed in Watt and rounded to the first decimal place.

2.3.    Calculation of the Lighting Efficiency (LEhood)

The Lighting Efficiency (LEhood) of a domestic range hood means the ratio between the average illumination and the nominal electric power input of the lighting system. It shall be calculated in lux per Watt and rounded at the nearest integer, as:

image

Where:

— 
Emiddle is the average illumination of the lighting system on the cooking surface measured under standard conditions, in lux and rounded to the nearest integer,
— 
WL is the nominal electric power input of the lighting system of the domestic range hood on the cooking surface, in Watt and rounded to the first decimal place.

2.4.    Calculation of the Grease Filtering Efficiency (GFEhood)

The Grease Filtering Efficiency (GFEhood) of a domestic range hood means the relative amount of grease retained within the range hood grease filters. It shall be calculated and rounded to the first decimal place as:

image

Where:

wg = the mass of oil in the grease filter, including all detachable coverings, in g and rounded to the first decimal place,

wr = the mass of oil retained in the airways of the range hood, in g and rounded to the first decimal place,

wt = the mass of oil retained in the absolute filter, in g and rounded to the first decimal place.

2.5.    Noise

The Noise Value (in dB) is measured as the airborne acoustical A-weighted sound power emissions (weighted average value – LWA) of a domestic range hood at the highest setting for normal use, rounded to the nearest integer.




ANNEX III

The label

1.   LABEL FOR DOMESTIC OVENS

1.1.    Domestic electric ovens

1.1.1.    Label presentation — for each cavity of a domestic electric oven