This document is an excerpt from the EUR-Lex website
Document 02014R0165-20200820
Regulation (EU) No 165/2014 of the European Parliament and of the Council of 4 February 2014 on tachographs in road transport, repealing Council Regulation (EEC) No 3821/85 on recording equipment in road transport and amending Regulation (EC) No 561/2006 of the European Parliament and of the Council on the harmonisation of certain social legislation relating to road transport (Text with EEA relevance)Text with EEA relevance
Consolidated text: Regulation (EU) No 165/2014 of the European Parliament and of the Council of 4 February 2014 on tachographs in road transport, repealing Council Regulation (EEC) No 3821/85 on recording equipment in road transport and amending Regulation (EC) No 561/2006 of the European Parliament and of the Council on the harmonisation of certain social legislation relating to road transport (Text with EEA relevance)Text with EEA relevance
Regulation (EU) No 165/2014 of the European Parliament and of the Council of 4 February 2014 on tachographs in road transport, repealing Council Regulation (EEC) No 3821/85 on recording equipment in road transport and amending Regulation (EC) No 561/2006 of the European Parliament and of the Council on the harmonisation of certain social legislation relating to road transport (Text with EEA relevance)Text with EEA relevance
02014R0165 — EN — 20.08.2020 — 001.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
REGULATION (EU) No 165/2014 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 February 2014 on tachographs in road transport, repealing Council Regulation (EEC) No 3821/85 on recording equipment in road transport and amending Regulation (EC) No 561/2006 of the European Parliament and of the Council on the harmonisation of certain social legislation relating to road transport (OJ L 060 28.2.2014, p. 1) |
Amended by:
|
|
Official Journal |
||
No |
page |
date |
||
REGULATION (EU) 2020/1054 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 July 2020 |
L 249 |
1 |
31.7.2020 |
REGULATION (EU) No 165/2014 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 4 February 2014
on tachographs in road transport, repealing Council Regulation (EEC) No 3821/85 on recording equipment in road transport and amending Regulation (EC) No 561/2006 of the European Parliament and of the Council on the harmonisation of certain social legislation relating to road transport
(Text with EEA relevance)
CHAPTER I
PRINCIPLES, SCOPE AND REQUIREMENTS
Article 1
Subject-matter and principles
Tachographs shall, as regards their construction, installation, use and testing, comply with the requirements of this Regulation.
Article 2
Definitions
In addition to the definitions referred to in paragraph 1, for the purposes of this Regulation the following definitions shall apply:
‘tachograph’ or ‘recording equipment’ means the equipment intended for installation in road vehicles to display, record, print, store and output automatically or semi-automatically details of the movement, including the speed, of such vehicles, in accordance with Article 4(3), and details of certain periods of activity of their drivers;
‘vehicle unit’ means the tachograph excluding the motion sensor and the cables connecting the motion sensor. The vehicle unit may be a single unit or several units distributed in the vehicle, provided that it complies with the security requirements of this Regulation; the vehicle unit includes, among other things, a processing unit, a data memory, a time measurement function, two smart card interface devices for driver and co-driver, a printer, a display, connectors and facilities for entering the user’s inputs;
‘motion sensor’ means a part of the tachograph providing a signal representative of vehicle speed and/or distance travelled;
‘tachograph card’ means a smart card, intended for use with the tachograph, which allows identification by the tachograph of the role of the cardholder and allows data transfer and storage;
‘record sheet’ means a sheet designed to accept and retain recorded data, to be placed in an analogue tachograph, and on which the marking devices of the analogue tachograph continuously inscribe the information to be recorded;
‘driver card’ means a tachograph card, issued by the authorities of a Member State to a particular driver, which identifies the driver and allows for the storage of driver activity data;
‘analogue tachograph’ means a tachograph using a record sheet in accordance with this Regulation;
‘digital tachograph’ means a tachograph using a tachograph card in accordance with this Regulation;
‘control card’ means a tachograph card issued by the authorities of a Member State to a national competent control authority which identifies the control body and, optionally, the control officer, and which allows access to the data stored in the data memory or in the driver cards and, optionally, in the workshop cards for reading, printing and/or downloading;
‘company card’ means a tachograph card issued by the authorities of a Member State to a transport undertaking needing to operate vehicles fitted with a tachograph, which identifies the transport undertaking and allows for the displaying, downloading and printing of the data, stored in the tachograph, which have been locked by that transport undertaking;
‘workshop card’ means a tachograph card issued by the authorities of a Member State to designated staff of a tachograph manufacturer, a fitter, a vehicle manufacturer or a workshop, approved by that Member State, which identifies the cardholder and allows for the testing, calibration and activation of tachographs, and/or downloading from them;
‘activation’ means the phase in which the tachograph becomes fully operational and implements all functions, including security functions, through the use of a workshop card;
‘calibration’ of a digital tachograph means updating or confirming vehicle parameters, including vehicle identification and vehicle characteristics, to be held in the data memory through the use of a workshop card;
‘downloading’ from a digital tachograph means the copying, together with the digital signature, of a part, or of a complete set, of data files recorded in the data memory of the vehicle unit or in the memory of a tachograph card, provided that this process does not alter or delete any stored data;
‘event’ means an abnormal operation detected by the digital tachograph which may result from a fraud attempt;
‘fault’ means an abnormal operation detected by the digital tachograph which may result from an equipment malfunction or failure;
‘installation’ means the mounting of a tachograph in a vehicle;
‘non-valid card’ means a card detected as faulty, or whose initial authentication failed, or whose start of validity date is not yet reached, or whose expiry date has passed;
‘periodic inspection’ means a set of operations performed to check that the tachograph works properly, that its settings correspond to the vehicle parameters, and that no manipulation devices are attached to the tachograph;
‘repair’ means any repair of a motion sensor or of a vehicle unit that requires the disconnection of its power supply, or its disconnection from other tachograph components, or the opening of the motion sensor or vehicle unit;
‘type-approval’ means a process to certify, by a Member State, in accordance with Article 13, that the tachograph, its relevant components or the tachograph card to be introduced to market fulfil the requirements of this Regulation;
‘interoperability’ means the capacity of systems and the underlying business processes to exchange data and to share information;
‘interface’ means a facility between systems which provides the media through which they can connect and interact;
‘time measurement’ means a permanent digital record of the coordinated universal date and time (UTC);
‘time adjustment’ means an automatic adjustment of current time at regular intervals and within a maximum tolerance of one minute, or an adjustment performed during calibration;
‘open standard’ means a standard set out in a standard specification document available freely or at a nominal charge which it is permissible to copy, distribute or use for no fee or for a nominal fee.
Article 3
Scope
Member States may exempt from the application of this Regulation vehicles used for transport operations which have been granted an exception in accordance with Article 14(2) of Regulation (EC) No 561/2006; they shall immediately notify the Commission thereof.
No later than three years from the end of the year of entry into force of the detailed provisions referred to in the second paragraph of Article 11, the following categories of vehicles operating in a Member State other than their Member State of registration shall be fitted with a smart tachograph as provided in Articles 8, 9 and 10 of this Regulation:
vehicles fitted with an analogue tachograph;
vehicles fitted with a digital tachograph complying with the specifications in Annex IB to Regulation (EEC) No 3821/85 applicable until 30 September 2011;
vehicles fitted with a digital tachograph complying with the specifications in Annex IB to Regulation (EEC) No 3821/85 applicable from 1 October 2011; and
vehicles fitted with a digital tachograph complying with the specifications in Annex IB to Regulation (EEC) No 3821/85 applicable from 1 October 2012.
Article 4
Requirements and data to be recorded
They shall:
Digital tachographs shall record the following data:
the distance travelled, and the speed of the vehicle;
time measurement;
position points as referred to in Article 8(1);
the identity of the driver;
the activity of the driver;
control, calibration and tachograph repair data, including the identity of the workshop;
events and faults.
Access to the data stored in the tachograph and the tachograph card may be granted at all times to:
the competent control authorities;
the relevant transport undertaking so that it can comply with its legal obligations, in particular as set out in Articles 32 and 33.
Article 5
Functions of the digital tachograph
Digital tachographs shall ensure the following functions:
Article 6
Display and warning
The following information shall be displayed:
time;
mode of operation;
driver activity:
data related to warnings;
data related to menu access.
Additional information may be displayed, provided that it is clearly distinguishable from the information required in this paragraph.
Article 7
Data protection
Member States shall, in particular, ensure that personal data are protected against uses other than those strictly linked to the Union legal acts referred to in paragraph 1 in relation to:
the use of a global navigation satellite system (GNSS) for the recording of location data as referred to in Article 8;
the use of remote communication for control purposes as referred to in Article 9, the use of tachographs with an interface as referred to in Article 10, the electronic exchange of information on driver cards as referred to in Article 31, and in particular any cross-border exchanges of such data with third countries; and
the keeping of records by transport undertakings as referred to in Article 33.
CHAPTER II
SMART TACHOGRAPH
Article 8
Recording of the position of the vehicle at certain points during the daily working period
In order to facilitate the verification of compliance with the relevant legislation, the position of the vehicle shall be recorded automatically at the following points, or at the closest point to such places where the satellite signal is available:
In order to facilitate the verification of compliance by control authorities, the smart tachograph shall also record whether the vehicle has been employed for the carriage of goods or passengers, as required by Regulation (EC) No 561/2006.
For those purposes, vehicles registered for the first time 36 months after the entry into force of the detailed provisions referred to in the first paragraph of Article 11 shall be fitted with a tachograph connected to a positioning service based on a satellite navigation system.
However, the recording of the border-crossing and additional activities referred to in the second and third indents of the first subparagraph and in the second subparagraph shall apply to vehicles that were registered in a Member State for the first time more than two years after the entry into force of the detailed provisions referred to in the second paragraph of Article 11, without prejudice to the obligation to retrofit certain vehicles later in accordance with Article 3(4).
Article 9
Remote early detection of possible manipulation or misuse
The data exchanged during communication shall be limited to the data necessary for the purpose of targeted roadside checks of vehicles with a potentially manipulated or misused tachograph. Such data shall relate to the following events or data recorded by the tachograph:
Article 10
Interface with Intelligent Transport Systems
The tachographs of vehicles registered for the first time 36 months after the entry into force of the detailed provisions referred to in Article 11 may be equipped with standardised interfaces allowing the data recorded or produced by tachograph to be used in operational mode, by an external device, provided that the following conditions are met:
the interface does not affect the authenticity and the integrity of the data of the tachograph;
the interface complies with the detailed provisions of Article 11;
the external device connected to the interface has access to personal data, including geopositioning data, only after the verifiable consent of the driver to whom the data relates.
The tachographs of vehicles registered for the first time in a Member State more than two years after the entry into force of detailed provisions referred to in the second paragraph of Article 11 shall be equipped with the interface referred to in paragraph 1.
Article 11
Detailed provisions for smart tachographs
In order to ensure that smart tachographs comply with the principles and requirements set out in this Regulation, the Commission shall, by means of implementing acts, adopt detailed provisions necessary for the uniform application of Articles 8, 9 and 10, excluding any provisions which would provide for the recording of additional data by the tachograph.
By 21 August 2021, the Commission shall adopt implementing acts laying down detailed provisions for the uniform application of the obligation to record and store data relating to any border crossing of the vehicle and activities referred to in the second and third indent of the first subparagraph of Article 8(1) and in the second subparagraph of Article 8(1).
By 21 February 2022, the Commission shall adopt implementing acts laying down detailed provisions necessary for the uniform application of rules on data requirements and functions, including Articles 8, 9 and 10 of this Regulation, and the installation of, tachographs for vehicles referred to in point (aa) of Article 2(1) of Regulation (EC) No 561/2006.
Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 42(3).
The detailed provisions referred to in the first, second and third paragraphs of this Article shall:
in relation to the performance of the functions of the smart tachograph as referred to in this Chapter, include the necessary requirements to guarantee the security, accuracy and reliability of data as provided to the tachograph by the satellite positioning service and the remote communication technology referred to in Articles 8 and 9;
specify the various conditions and requirements for the satellite positioning service and the remote communication technology referred to in Articles 8 and 9 to be either outside or embedded in the tachograph and, when outside, specify the conditions for the use of the satellite positioning signal as a second motion sensor;
specify the necessary standards for the interface referred to in Article 10. Such standards may include a provision on the distribution of access rights for drivers, workshops and transport undertakings, and control roles for the data recorded by the tachograph, which control roles shall be based on an authentication/authorisation mechanism defined for the interface, such as a certificate for each level of access and subject to the technical feasibility thereof.
CHAPTER III
TYPE-APPROVAL
Article 12
Applications
Functionality certificates shall be issued to the manufacturer by the type-approval authority.
The interoperability certificate shall be issued by a single laboratory under the authority and responsibility of the Commission.
In respect of tachographs, their relevant components, and tachograph cards:
the security certificate shall certify the following for the vehicle unit, tachograph cards, motion sensor, and connection to the GNSS receiver when the GNSS is not embedded in the vehicle units:
compliance with security targets;
fulfilment of the following security functions: identification and authentication, authorisation, confidentiality, accountability, integrity, audit, accuracy and reliability of service;
the functional certificate shall certify that the tested item fulfils the appropriate requirements in terms of functions performed, environmental characteristics, electromagnetic compatibility characteristics, compliance with physical requirements and compliance with other applicable standards;
the interoperability certificate shall certify that the tested item is fully interoperable with the necessary tachographs or tachograph card models.
Article 13
Granting of type-approval
A Member State shall grant type-approval to any type of vehicle unit, motion sensor, model record sheet or tachograph card which complies with the requirements set out in Articles 4 and 11, provided that the Member State is in a position to check that production models conform to the approved type.
Any modifications or additions to an approved model must receive additional type-approval from the Member State which granted the original type-approval.
Article 14
Type-approval mark
Member States shall issue to the applicant a type-approval mark conforming to a pre-established model, for each type of vehicle unit, motion sensor, model record sheet or tachograph card which they approve pursuant to Article 13 and Annex II. Such models shall be adopted by the Commission through implementing acts in accordance with the examination procedure referred to in Article 42(3).
Article 15
Approval or refusal
The competent authorities of the Member State to which the application for type-approval has been submitted shall, in respect of each type of vehicle unit, motion sensor, model record sheet or tachograph card which they approve, send within one month a copy of the type-approval certificate accompanied by copies of the relevant specifications, including those relating to the seals, to the authorities of the other Member States. Where the competent authorities do not approve the application for type-approval, they shall notify the authorities of the other Member States that approval has been refused and shall communicate the reasons for their decision.
Article 16
Compliance of equipment with type-approval
In any event, the competent authorities of the Member States shall within one month notify one another and the Commission of any withdrawal of type-approval or of any other measures taken pursuant to paragraphs 1, 2 or 3, and shall specify the reasons for such action.
If talks between the Member States have not resulted in agreement within four months of the date of the notification referred to in paragraph 3, the Commission, after consulting experts from all Member States and having considered all the relevant factors, such as economic and technical factors, shall within six months of the expiry of that four-month period adopt a decision which shall be notified to the Member States concerned and communicated at the same time to the other Member States. The Commission shall in each case lay down the time-limit for implementation of its decision.
Article 17
Approval of record sheets
Article 18
Justification of refusal decisions
All decisions pursuant to this Regulation refusing or withdrawing approval of a type of vehicle unit, motion sensor, model record sheet or tachograph card shall specify in detail the reasons on which they are based. A decision shall be communicated to the party concerned, who shall at the same time be informed of the remedies available under the law of the relevant Member State and of the time-limits for the exercise of such remedies.
Article 19
Recognition of type-approved tachographs
Member States shall not refuse to register any vehicle fitted with a tachograph, or prohibit the entry into service or use of such vehicle for any reason connected with the fact that the vehicle is fitted with such equipment, if the equipment bears the type-approval mark referred to in Article 14 and the installation plaque referred to in Article 22(4).
Article 20
Security
Article 21
Field tests
CHAPTER IV
INSTALLATION AND INSPECTION
Article 22
Installation and repair
A seal shall be removed or broken only:
The removed or broken seals shall be replaced by an approved fitter or a workshop without undue delay and at the latest within seven days of their removal or breaking. When the seals have been removed or broken for control purposes, they may be replaced by a control officer equipped with sealing equipment and a unique special mark without undue delay.
When a control officer removes a seal, the control card shall be inserted in the tachograph from the moment of the removal of the seal until the inspection is finished, including in the case of the placement of a new seal. The control officer shall issue a written statement containing at least the following information:
Before replacing the seals, a check and calibration of the tachograph shall be performed by an approved workshop, except where a seal has been removed or broken for control purposes and replaced by a control officer.
Article 23
Inspections of tachographs
The inspections referred to in paragraph 1 shall check at least the following:
Article 24
Approval of fitters, workshops and vehicle manufacturers
Member States shall ensure that fitters, workshops and vehicle manufacturers are competent and reliable. For that purpose, they shall establish and publish a set of clear national procedures and shall ensure that the following minimum criteria are met:
the staff are properly trained;
the equipment necessary to carry out the relevant tests and tasks is available;
the fitters, workshops and vehicle manufacturers are of good repute.
Audits of approved fitters or workshops shall be carried out as follows:
approved fitters or workshops shall be subject, at least every two years, to an audit of the procedures they apply when handling tachographs. The audit shall focus in particular on the security measures taken and the handling of workshop cards. Member States may carry out these audits without conducting a site visit;
unannounced technical audits of approved fitters or workshops shall also take place in order to check the calibrations, inspections and installations carried out. Those audits shall cover at least 10 % of the approved fitters and workshops annually.
Article 25
Workshop cards
CHAPTER V
DRIVER CARDS
Article 26
Issuing of driver cards
However, the normal residence of a person whose occupational ties are in a place different from their personal ties and who consequently lives in turn in different places situated in two or more Member States shall be regarded as being the place of their personal ties, provided that such person returns there regularly. This last condition need not be complied with where the person is living in a Member State in order to carry out a fixed-term assignment.
The Commission shall, on the basis of data provided by Member States, closely monitor the application of this paragraph. It shall report its findings every two years to the European Parliament and to the Council, and shall examine in particular whether temporary driver cards produce any negative impact on the labour market, and whether temporary cards are issued to named drivers ordinarily on more than one occasion. The Commission may make an appropriate legislative proposal to revise this paragraph.
Article 27
Use of driver cards
Article 28
Renewal of driver cards
Article 29
Stolen, lost or defective driver cards
Article 30
Mutual recognition and exchange of driver cards
Article 31
Electronic exchange of information on driver cards
In order to ensure that an applicant does not already hold a valid driver card as referred to in Article 26, Member States shall maintain national electronic registers containing the following information on driver cards, including on those referred to in Article 26(4), for a period at least equivalent to the period of validity of those cards:
CHAPTER VI
USE OF EQUIPMENT
Article 32
Correct use of tachographs
Article 33
Responsibility of transport undertakings
Transport undertakings shall issue a sufficient number of record sheets to drivers of vehicles fitted with analogue tachographs, taking into account the fact that record sheets are personal in character, the length of the period of service and the possible need to replace record sheets which are damaged or have been taken by an authorised control officer. Transport undertakings shall issue to drivers only record sheets of an approved model suitable for use in the equipment installed in the vehicle.
Where a vehicle is fitted with a digital tachograph, the transport undertaking and the driver shall ensure that, taking into account the length of the period of service, the printing of data from the tachograph at the request of a control officer can be carried out correctly in the event of an inspection.
Article 34
Use of driver cards and record sheets
When, as a result of being away from the vehicle, a driver is unable to use the tachograph fitted to the vehicle, the periods of time referred to in points (ii), (iii) and (iv) of paragraph 5(b) shall:
if the vehicle is fitted with an analogue tachograph, be entered on the record sheet, either manually, by automatic recording or other means, legibly and without dirtying the record sheet; or
if the vehicle is fitted with a digital tachograph, be entered onto the driver card using the manual entry facility provided for in the tachograph.
Member States shall not impose on drivers a requirement to present forms attesting to their activities while away from the vehicle.
Where there is more than one driver on board a vehicle fitted with an analogue tachograph, the drivers shall amend the record sheets as necessary, so that the relevant information is recorded on the record sheet of the driver who is actually driving.
Drivers shall:
ensure that the time recorded on the record sheet corresponds to the official time in the country of registration of the vehicle;
operate the switch mechanisms enabling the following periods of time to be recorded separately and distinctly:
under the sign: driving time,
under the sign: ‘other work’, which means any activity other than driving, as defined in point (a) of Article 3 of Directive 2002/15/EC, and also any work for the same or another employer within or outside of the transport sector,
under the sign: ‘availability’, as defined in point (b) of Article 3 of Directive 2002/15/EC,
under the sign : breaks, rest, annual leave or sick leave,
under the sign for ‘ferry/train’: In addition to the sign : the rest period spent on a ferry or train as required by Article 9 of Regulation (EC) No 561/2006.
Each driver of a vehicle fitted with an analogue tachograph shall enter the following information on his record sheet:
on beginning to use the record sheet — his surname and first name;
the date and place where use of the record sheet begins and the date and place where such use ends;
the registration number of each vehicle to which the driver is assigned, both at the start of the first journey recorded on the record sheet and then, in the event of a change of vehicle, during use of the record sheet;
the odometer reading:
at the start of the first journey recorded on the record sheet,
at the end of the last journey recorded on the record sheet,
in the event of a change of vehicle during a working day, the reading on the first vehicle to which the driver was assigned and the reading on the next vehicle;
the time of any change of vehicle;
the symbols of the countries in which the daily working period started and finished. The driver shall also enter the symbol of the country that the driver enters after crossing a border of a Member State at the beginning of the driver’s first stop in that Member State. That first stop shall be made at the nearest possible stopping place at or after the border. Where the crossing of the border of a Member State takes place on a ferry or train, the driver shall enter the symbol of the country at the port or station of arrival.
From 2 February 2022 the driver shall also enter the symbol of the country that the driver enters after crossing a border of a Member State at the beginning of the driver’s first stop in that Member State. That first stop shall be made at the nearest possible stopping place at or after the border. Where the crossing of the border of a Member State takes place on a ferry or train, the driver shall enter the symbol of the country at the port or station of arrival.
Member States may require drivers of vehicles engaged in transport operations inside their territory to add more detailed geographic specifications to the country symbol, provided that those Member States have notified those detailed geographic specifications to the Commission before 1 April 1998.
It shall not be necessary for drivers to enter the information referred to in the first subparagraph if the tachograph is automatically recording location data in accordance with Article 8.
Article 35
Damaged driver cards and record sheets
Where a driver card is damaged, malfunctions, or is lost or stolen, the driver shall:
at the start of his journey, print out the details of the vehicle he is driving, and enter on that printout:
details that enable the driver to be identified (name, driver card or driving licence number), including his signature;
the periods referred to in points (ii), (iii) and (iv) of Article 34(5)(b);
at the end of the journey, print out the information relating to periods of time recorded by the tachograph, record any periods of other work, availability and rest taken since the printout made at the start of the journey, where not recorded by the tachograph, and mark on that document details enabling the driver to be identified (name, driver card or driving licence number), including the driver’s signature.
Article 36
Records to be carried by the driver
Where a driver drives a vehicle fitted with an analogue tachograph, he shall be able to produce, whenever an authorised control officer so requests:
the record sheets for the current day and those used by the driver in the previous 28 days,
the driver card, if one is held, and
any manual records and printouts made during the current day and the previous 28 days as required under this Regulation and Regulation (EC) No 561/2006.
Where the driver drives a vehicle fitted with a digital tachograph, he shall be able to produce, whenever an authorised control officer so requests:
his driver card,
any manual records and printouts made during the current day and the previous 28 days as required under this Regulation and Regulation (EC) No 561/2006,
the record sheets corresponding to the same period as that referred to in point (ii) during which he drove a vehicle fitted with an analogue tachograph.
Article 37
Procedures in the event of malfunctioning equipment
If the vehicle is unable to return to the transport undertaking’s premises within a period of one week calculated from the day of the breakdown or of the discovery of defective operation, the repair shall be carried out en route.
Measures taken by Member States pursuant to Article 41 shall give the competent authorities power to prohibit the use of the vehicle in cases where the breakdown or faulty operation has not been remedied as provided in the first and the second subparagraphs of this paragraph in so far as this is in accordance with the national legislation in the Member State concerned.
While the tachograph is unserviceable or malfunctioning, the driver shall mark data enabling him to be identified (name, driver card or driving licence number), including a signature, as well as the information for the various periods of time which are no longer recorded or printed out correctly by the tachograph:
on the record sheet or sheets, or
on a temporary sheet to be attached to the record sheet or to be kept together with the driver card.
CHAPTER VII
ENFORCEMENT AND SANCTIONS
Article 38
Control officers
In order to monitor effectively compliance with this Regulation, sufficient equipment and appropriate legal powers shall be made available to authorised control officers to enable them to carry out their duties in accordance with this Regulation. That equipment shall include, in particular:
control cards allowing access to data recorded in tachographs and in tachograph cards, and optionally in workshop cards;
the tools necessary to download data files from vehicle units and tachograph cards and to be able to analyse such data files and printouts from digital tachographs in combination with record sheets or charts from analogue tachographs.
If, after having carried out a check, control officers find sufficient evidence leading to reasonable suspicion of fraud, they shall be empowered to direct the vehicle to an authorised workshop to perform further tests in order to check, in particular, that the tachograph:
works properly;
records and stores data correctly, and that the calibration parameters are correct.
Article 39
Training of control officers
Article 40
Mutual assistance
Member States shall assist each other in applying this Regulation and in checking compliance therewith.
Within the framework of that mutual assistance, the competent authorities of the Member States shall, in particular, regularly send to each other all available information concerning infringements of this Regulation by fitters and workshops, types of manipulation practices, and any penalties imposed for such infringements.
Article 41
Penalties
CHAPTER VIII
FINAL PROVISIONS
Article 42
Committee
Where the committee delivers no opinion, the Commission shall not adopt the draft implementing act and the third subparagraph of Article 5(4) of Regulation (EU) No 182/2011 shall apply.
Where the opinion of the committee is to be obtained by a written procedure, that procedure shall be terminated without result when, within the time-limit for delivery of the opinion, the chair of the committee so decides or a simple majority of committee members so request.
Article 43
Tachograph Forum
Article 44
Communication of national measures
Member States shall communicate to the Commission the text of the laws, regulations and administrative provisions which they adopt in the field governed by this Regulation no later than 30 days after their date of adoption and for the first time by 2 March 2015.
Article 45
Amendment of Regulation (EC) No 561/2006
Regulation (EC) No 561/2006 is hereby amended as follows:
in Article 3, the following point is inserted after point (a):
vehicles or combinations of vehicles with a maximum permissible mass not exceeding 7,5 tonnes used for carrying materials, equipment or machinery for the driver’s use in the course of his work, and which are used only within a 100 km radius from the base of the undertaking and on the condition that driving the vehicle does not constitute the driver’s main activity;’;
Article 13(1) is amended as follows:
in points (d), (f) and (p), the words ‘50 kilometre’ or ‘50 km’ are replaced by the words ‘100 km’;
the first subparagraph of point (d) is replaced by the following:
vehicles or combinations of vehicles with a maximum permissible mass not exceeding 7,5 tonnes used by universal service providers as defined in Article 2(13) of Directive 97/67/EC of the European Parliament and of the Council of 15 December 1997 on common rules for the development of the internal market of Community postal services and the improvement of quality of service ( *1 ) to deliver items as part of the universal service.
Article 46
Transitional measures
In so far as the implementing acts referred to in this Regulation have not been adopted so that they may be applied at the time of application of this Regulation, the provisions in Regulation (EEC) No 3821/85, including in Annex IB thereto, shall continue to apply, on a transitional basis, until the date of application of the implementing acts referred to in this Regulation.
Article 47
Repeal
Regulation (EEC) No 3821/85 is hereby repealed. References to the repealed Regulation shall be construed as references to this Regulation.
Article 48
Entry into force
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
It shall, subject to the transitional measures in Article 46, apply with effect from 2 March 2016. However, Articles 24, 34 and 45 shall apply with effect from 2 March 2015.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
ANNEX I
REQUIREMENTS FOR CONSTRUCTION, TESTING, INSTALLATION AND INSPECTION FOR ANALOGUE TACHOGRAPHS
I. DEFINITIONS
In this Annex:
‘recording equipment’ or ‘analogue tachograph’ means:
equipment intended for installation in road vehicles to show and record automatically or semi-automatically details of the movement of such vehicles and details of certain periods of activity of their drivers;
‘constant of the recording equipment’ means:
the numerical characteristic giving the value of the input signal required to show and record a distance travelled of one kilometre; this constant must be expressed either in revolutions per kilometre (k = … rev/km), or in impulses per kilometre (k = … imp/km);
‘characteristic coefficient’ means:
the numerical characteristic giving the value of the output signal emitted by the part of the vehicle linking it with the recording equipment (gearbox output shaft or axle) while the vehicle travels a distance of one measured kilometre under normal test conditions (see point 4 of Part VI of this Annex). The characteristic coefficient is expressed either in revolutions per kilometre (w = … rev/km) or in impulses per kilometre (w = … imp/km);
‘effective circumference of wheel tyres’ means:
the average of the distances travelled by the several wheels moving the vehicle (driving wheels) in the course of one complete rotation. The measurement of these distances must take place under normal test conditions (see point 4 of Part VI of this Annex) and is expressed in the form: 1 = … mm.
II. GENERAL CHARACTERISTICS AND FUNCTIONS OF RECORDING EQUIPMENT
The equipment must be able to record the following:
distance travelled by the vehicle;
speed of the vehicle;
driving time;
other periods of work or of availability;
breaks from work and daily rest periods;
opening of the case containing the record sheet;
for electronic recording equipment which is equipment operating by signals transmitted electrically from the distance and speed sensor, any interruption exceeding 100 milliseconds in the power supply of the recording equipment (except lighting), in the power supply of the distance and speed sensor and any interruption in the signal lead to the distance and speed sensor.
For vehicles used by two drivers, the equipment must be capable of recording simultaneously but distinctly and on two separate record sheets details of the periods listed under points 3, 4 and 5 of the first paragraph.
III. CONSTRUCTION REQUIREMENTS FOR RECORDING EQUIPMENT
(a) General points
1. Recording equipment shall include the following:
Visual instruments showing:
Recording instruments comprising:
A means of marking showing on the record sheet individually:
2. Any inclusion in the equipment of devices additional to those listed in point 1 must not interfere with the proper operation of the mandatory devices or with the reading of them.
The equipment must be submitted for approval complete with any such additional devices.
3. Materials
3.1. All the constituent parts of the recording equipment must be made of materials with sufficient stability and mechanical strength and stable electrical and magnetic characteristics.
3.2. Any modification in a constituent part of the equipment or in the nature of the materials used for its manufacture must, before being applied in manufacture, be submitted for approval to the authority which granted type-approval for the equipment.
4. Measurement of distance travelled
The distances travelled may be measured and recorded either:
Any recording of reversing movements must on no account affect the clarity and accuracy of the other recordings.
5. Measurement of speed
5.1. The range of speed measurement shall be as stated in the type-approval certificate.
5.2. The natural frequency and the damping of the measuring device must be such that the instruments showing and recording the speed can, within the range of measurement, follow acceleration changes of up to 2 m/s2, within the limits of accepted tolerances.
6. Measurement of time (clock)
6.1. The control of the mechanism for resetting the clock must be located inside a case containing the record sheet; each opening of that case must be automatically recorded on the record sheet.
6.2. If the forward movement mechanism of the record sheet is controlled by the clock, the period during which the latter will run correctly after being fully wound must be greater by at least 10 % than the recording period corresponding to the maximum sheet-load of the equipment.
7. Lighting and protection
7.1. The visual instruments of the equipment must be provided with adequate non-dazzling lighting.
7.2. For normal conditions of use, all the internal parts of the equipment must be protected against damp and dust. In addition, they must be made proof against tampering by means of casings capable of being sealed.
(b) Visual instruments
1. Distance travelled indicator (distance recorder)
1.1. The value of the smallest grading on the instrument showing distance travelled must be 0,1 kilometres. Figures showing hectometres must be clearly distinguishable from those showing whole kilometres.
1.2. The figures on the distance recorder must be clearly legible and must have an apparent height of at least 4 mm.
1.3. The distance recorder must be capable of reading up to at least 99 999,9 kilometres.
2. Speed indicators (speedometer)
2.1. Within the range of measurement, the speed scale must be uniformly graduated by 1, 2, 5 or 10 kilometres per hour. The value of a speed graduation (space between two successive marks) must not exceed 10 % of the maximum speed shown on the scale.
2.2. The range indicated beyond that measured need not be marked by figures.
2.3. The length of each space on the scale representing a speed difference of 10 kilometres per hour must not be less than 10 millimetres.
2.4. On an indicator with a needle, the distance between the needle and the instrument face must not exceed three millimetres.
3. Time indicator (clock)
The time indicator must be visible from outside the equipment and must give a clear, plain and unambiguous reading.
(c) Recording instruments
1. General points
1.1. All equipment, whatever the form of the record sheet (strip or disc), must be provided with a mark enabling the record sheet to be inserted correctly, in such a way as to ensure that the time shown by the clock and the time-marking on the record sheet correspond.
1.2. The mechanism moving the record sheet must be such as to ensure that the latter moves without play and can be freely inserted and removed.
1.3. For record sheets in disc form, the forward movement device must be controlled by the clock mechanism. In this case, the rotating movement of the record sheet must be continuous and uniform, with a minimum speed of seven millimetres per hour measured at the inner border of the ring marking the edge of the speed recording area. In equipment of the strip type, where the forward movement device of the record sheets is controlled by the clock mechanism, the speed of rectilinear forward movement must be at least 10 millimetres per hour.
1.4. Recording of the distance travelled, of the speed of the vehicle and of any opening of the case containing the record sheet or sheets must be automatic.
2. Recording distance travelled
2.1. Every kilometre of distance travelled must be represented on the record by a variation of at least one millimetre on the corresponding coordinate.
2.2. Even at speeds reaching the upper limit of the range of measurement, the record of distances must still be clearly legible.
3. Recording speed
3.1. Whatever the form of the record sheet, the speed recording stylus must normally move in a straight line and at right angles to the direction of travel of the record sheet. However, the movement of the stylus may be curvilinear, provided the following conditions are satisfied:
3.2. Each variation in speed of 10 kilometres per hour must be represented on the record by a variation of at least 1,5 millimetres on the corresponding coordinate.
4. Recording time
4.1. Recording equipment must be so constructed that the period of driving time is always recorded automatically and that it is possible, through the operation where necessary of a switch device, to record separately the other periods of time as indicated in points (ii), (iii) and (iv) of Article 34(5)(b) of this Regulation.
4.2. It must be possible, from the characteristics of the traces, their relative positions and if necessary the signs laid down in Article 34 of this Regulation, to distinguish clearly between the various periods of time. The various periods of time should be differentiated from one another on the record by differences in the thickness of the relevant traces, or by any other system of at least equal effectiveness from the point of view of legibility and ease of interpretation of the record.
4.3. In the case of vehicles with a crew consisting of more than one driver, the recordings provided for in point 4.1 must be made on separate record sheets, each record sheet being allocated to one driver. In this case, the forward movement of the separate record sheets must be effected either by a single mechanism or by separate synchronised mechanisms.
(d) Closing device
1. The case containing the record sheet or sheets and the control of the mechanism for resetting the clock must be fitted with a lock.
2. Each opening of the case containing the record sheet or sheets and the control of the mechanism for resetting the clock must be automatically recorded on the record sheet or sheets.
(e) Markings
1. The following markings must appear on the instrument face of the equipment:
However, these requirements shall not apply to recording equipment approved before 10 August 1970.
2. The descriptive plaque must be built into the equipment and must show the following markings, which must be visible on the equipment when installed:
where α is the angle measured from the horizontal position of the front face (fitted the right way up) of the equipment for which the instrument is calibrated, while β and γ represent respectively the maximum permissible upward and downward deviations from the angle of calibration α.
(f) Maximum tolerances (visual and recording instruments)
1. On the test bench before installation:
distance travelled:
1 % more or less than the real distance, where that distance is at least one kilometre;
speed:
3 km/h more or less than the real speed;
time:
± two minutes per day with a maximum of 10 minutes per seven days in cases where the running period of the clock after rewinding is not less than that period.
2. On installation:
distance travelled:
2 % more or less than the real distance, where that distance is at least one kilometre;
speed:
4 km/h more or less than the real speed;
time:
3. In use:
distance travelled:
4 % more or less than the real distance, where that distance is at least one kilometre;
speed:
6 km/h more or less than the real speed;
time:
4. The maximum tolerances set out in points 1, 2 and 3 are valid for temperatures between 0 °C and 40 °C, temperatures being taken in close proximity to the equipment.
5. Measurement of the maximum tolerances set out in points 2 and 3 shall take place under the conditions laid down in Part VI.
IV. RECORD SHEETS
(a) General points
1. The record sheets must be such that they do not impede the normal functioning of the instrument and that the records which they contain are indelible and easily legible and identifiable.
The record sheets must retain their dimensions and any records made on them under normal conditions of humidity and temperature.
In addition it must be possible to write on the record sheets, without damaging them and without affecting the legibility of the recordings, the information referred to in Article 34 of this Regulation.
Under normal conditions of storage, the recordings must remain clearly legible for at least one year.
2. The minimum recording capacity of the record sheets, whatever their form, must be 24 hours.
If several discs are linked together to increase the continuous recording capacity which can be achieved without intervention by staff, the links between the various discs must be made in such a way that there are no breaks in or overlapping of recordings at the point of transfer from one disc to another.
(b) Recording areas and their graduation
1. The record sheets shall include the following recording areas:
2. The area for recording speed must be scaled off in divisions of 20 kilometres per hour or less. The speed corresponding to each marking on the scale must be shown in figures against that marking. The symbol ‘km/h’ must be shown at least once within the area. The last marking on the scale must coincide with the upper limit of the range of measurement.
3. The area for recording distance travelled must be set out in such a way that the number of kilometres travelled may be read without difficulty.
4. The area or areas reserved for recording the periods referred to in point 1 must be so marked that it is possible to distinguish clearly between the various periods of time.
(c) Information to be printed on the record sheets
Each record sheet must bear, in printed form, the following information:
By way of minimal additional requirements, each record sheet must bear, in printed form, a time-scale graduated in such a way that the time may be read directly at intervals of fifteen minutes while each five-minute interval may be determined without difficulty.
(d) Free space for handwritten insertions
A free space must be provided on the record sheets such that drivers may as a minimum write in the following details:
V. INSTALLATION OF RECORDING EQUIPMENT
1. |
Recording equipment must be positioned in the vehicle in such a way that the driver has a clear view from his seat of the speedometer, distance recorder and clock while at the same time all parts of those instruments, including driving parts, are protected against accidental damage. |
2. |
It must be possible to adapt the constant of the recording equipment to the characteristic coefficient of the vehicle by means of a suitable device, to be known as an adaptor. Vehicles with two or more rear axle ratios must be fitted with a switch device whereby those various ratios may be automatically brought into line with the ratio for which the equipment has been adapted to the vehicle. |
3. |
After the equipment has been checked on installation, an installation plaque must be affixed to the vehicle beside the equipment or in the equipment itself and in such a way as to be clearly visible. After every inspection by an approved fitter or workshop requiring a change in the setting of the installation itself, a new installation plaque must be affixed in place of the previous one. The installation plaque must show at least the following details:
—
name, address or trade name of the approved fitter, workshop or vehicle manufacturer,
—
characteristic coefficient of the vehicle, in the form ‘w = … rev/km’ or ‘w = … imp/km’,
—
effective circumference of the wheel tyres, in the form ‘1 = … mm’,
—
the dates on which the characteristic coefficient of the vehicle was determined and the effective circumference of the wheel tyres was measured.
|
4. |
Sealing The following parts must be sealed:
(a)
the installation plaque, unless it is attached in such a way that it cannot be removed without the markings thereon being destroyed;
(b)
the two ends of the link between the recording equipment proper and the vehicle;
(c)
the adaptor itself and the point of its insertion into the circuit;
(d)
the switch mechanism for vehicles with two or more axle ratios;
(e)
the links joining the adaptor and the switch mechanism to the rest of the equipment;
(f)
the casings required under point (a)(7.2) of Part III;
(g)
any cover giving access to the means of adapting the constant of the recording equipment to the characteristic coefficient of the vehicle. In particular cases, further seals may be required on approval of the equipment type and a note of the positioning of those seals must be made on the approval certificate. The seals mentioned in points (b), (c) and (e) of the first paragraph are authorised to be removed:
—
in cases of emergency,
—
in order to install, adjust or repair a speed limitation device or any other device contributing to road safety,
provided that the recording equipment continues to function reliably and correctly and is resealed by an approved fitter or workshop immediately after fitting the speed limitation device or any other device contributing to road safety or within seven days in other cases. For each occasion that those seals are broken, a written statement giving the reasons for such action must be prepared and made available to the competent authority. |
5. |
The cables connecting the recording equipment to the transmitter must be protected by a continuous plastic-coated rust-protected steel sheath with crimped ends, except where an equivalent protection against manipulation is guaranteed by other means (for example by electronic monitoring such as signal encryption) capable of detecting the presence of any device which is unnecessary for the correct operation of the recording equipment and the purpose of which is to prevent the accurate operation of the recording equipment by short circuiting or interruption or by modification of the electronic data from the speed and distance sensor. A joint, comprised of sealed connections, is deemed to be continuous within the meaning of this Regulation. The aforementioned electronic monitoring may be replaced by an electronic control which ensures that the recording equipment is able to record any movement of the vehicle, independent from the signal of the speed and distance sensor. For the purposes of the application of this point, M 1 and N 1 vehicles are those defined in Part A of Annex II to Directive 2007/46/EC of the European Parliament and of the Council ( 12 ). For those vehicles that are equipped with tachographs in compliance with this Regulation and are not designed to be fitted with an armoured cable between the distance and speed sensors and the recording equipment, an adaptor shall be fitted as close as possible to the distance and speed sensors. The armoured cable shall be fitted from the adaptor to the recording equipment. |
VI. CHECKS AND INSPECTIONS
The Member States shall nominate the bodies which shall carry out the checks and inspections.
1. Certification of new or repaired instruments
Every individual device, whether new or repaired, shall be certified in respect of its correct operation and the accuracy of its readings and recordings, within the limits laid down in point (f)(1) of Part III, by means of sealing in accordance with point (f) of the first paragraph of point 4 of Part V.
For this purpose, the Member States may stipulate an initial verification, consisting of a check on, and confirmation of, the conformity of a new or repaired device with the type-approved model and/or with the requirements of this Regulation, or may delegate the power to certify to the manufacturers or to their authorised agents.
2. Installation
When being fitted to a vehicle, the equipment and the whole installation must comply with the provisions relating to maximum tolerances laid down in point (f)(2) of Part III.
The inspection tests shall be carried out by the approved fitter or workshop on its own responsibility.
3. Periodic inspections
(a) Periodic inspections of the equipment fitted to vehicles shall take place at least every two years and may be carried out in conjunction with roadworthiness tests of vehicles.
Those inspections shall include the following checks:
(b) An inspection to ensure compliance with point (f)(3) of Part III on the maximum tolerances in use shall be carried out at least once every six years, although each Member State may stipulate a shorter inspection interval for vehicles registered in its territory. Such inspections must include replacement of the installation plaque.
4. Measurement of errors
The measurement of errors on installation and during use shall be carried out under the following conditions, which are to be regarded as constituting standard test conditions:
ANNEX II
APPROVAL MARK AND CERTIFICATE
I. APPROVAL MARK
1. The approval mark shall be made up of:
a rectangle, within which shall be placed the letter ‘e’ followed by a distinguishing number or letter for the country which has issued the approval in accordance with the following conventional signs:
Belgium |
6, |
Bulgaria |
34, |
Czech Republic |
8, |
Denmark |
18, |
Germany |
1, |
Estonia |
29, |
Ireland |
24, |
Greece |
23, |
Spain |
9, |
France |
2, |
Croatia |
25, |
Italy |
3, |
Cyprus |
CY, |
Latvia |
32, |
Lithuania |
36, |
Luxembourg |
13, |
Hungary |
7, |
Malta |
MT, |
Netherlands |
4, |
Austria |
12, |
Poland |
20, |
Portugal |
21, |
Romania |
19, |
Slovenia |
26, |
Slovakia |
27, |
Finland |
17, |
Sweden |
5, |
United Kingdom |
11, |
and
an approval number corresponding to the number of the approval certificate drawn up for the prototype of the recording equipment or the record sheet or to the number of a tachograph card, placed at any point within the immediate proximity of that rectangle.
2. The approval mark shall be shown on the descriptive plaque of each set of equipment and on each record sheet and on each tachograph card. It must be indelible and must always remain clearly legible.
3. The dimensions of the approval mark drawn below ( 13 ) are expressed in millimetres, these dimensions being minima. The ratios between the dimensions must be maintained.
II. APPROVAL CERTIFICATE FOR ANALOGUE TACHOGRAPHS
A Member State which has granted approval shall issue the applicant with an approval certificate, the model of which is given below. When informing other Member States of approvals issued or, if the occasion should arise, withdrawn, a Member State shall use copies of that certificate.
APPROVAL CERTIFICATE
Name of competent administration …
Notification concerning ( 14 ):
…
Approval No …
1. Trade mark or name …
2. Name of type or model …
3. Name of manufacturer …
4. Address of manufacturer …
5. Submitted for approval on …
6. Tested at …
7. Date and number of the test(s) …
8. Date of approval …
9. Date of withdrawal of approval …
10. Type or types of recording equipment in which sheet is designed to be used …
11. Place …
12. Date …
13. Descriptive documents annexed …
14. Remarks (including the position of seals if applicable)
…
(Signature)
III. APPROVAL CERTIFICATE FOR DIGITAL TACHOGRAPHS
A Member State which has granted approval shall issue the applicant with an approval certificate, the model of which is given below. When informing other Member States of approvals issued or, if the occasion should arise, withdrawn, a Member State shall use copies of that certificate.
APPROVAL CERTIFICATE FOR DIGITAL TACHOGRAPHS
Name of competent administration …
Notification concerning ( 15 ):
□ approval of: |
□ withdrawal of approval of: |
□ recording equipment model
□ recording equipment component ( 16 )
□ a driver’s card
□ a workshop card
□ a company card
□ a controller’s card
…
Approval No …
1. Manufacturing brand or trademark …
2. Name of model …
3. Name of manufacturer …
4. Address of manufacturer …
5. Submitted for approval for …
6. Laboratory(-ies) …
7. Date and number of test report …
8. Date of approval …
9. Date of withdrawal of approval …
10. Model of recording equipment(s) with which the component is designed to be used …
11. Place …
12. Date …
13. Descriptive documents annexed …
14. Remarks
…
(Signature)
( 1 ) Regulation (EC) No 1071/2009 of the European Parliament and of the Council of 21 October 2009 establishing common rules concerning the conditions to be complied with to pursue the occupation of road transport operator and repealing Council Directive 96/26/EC (OJ L 300, 14.11.2009, p. 51).
( 2 ) Regulation (EC) No 1072/2009 of the European Parliament and of the Council of 21 October 2009 on common rules for access to the international road haulage market (OJ L 300, 14.11.2009, p. 72).
( 3 ) Regulation (EC) No 1073/2009 of the European Parliament and of the Council of 21 October 2009 on common rules for access to the international market for coach and bus services, and amending Regulation (EC) No 561/2006 (OJ L 300, 14.11.2009, p. 88).
( 4 ) Directive 2002/15/EC of the European Parliament and of the Council of 11 March 2002 on the organisation of the working time of persons performing mobile road transport activities (OJ L 80, 23.3.2002, p. 35).
( 5 ) Council Directive 92/6/EEC of 10 February 1992 on the installation and use of speed limitation devices for certain categories of motor vehicles in the Community (OJ L 57, 2.3.1992, p. 27).
( 6 ) Council Directive 92/106/EEC of 7 December 1992 on the establishment of common rules for certain types of combined transport of goods between Member States (OJ L 368, 17.12.1992, p. 38).
( 7 ) Directive 96/71/EC of the European Parliament and of the Council of 16 December 1996 concerning the posting of workers in the framework of the provision of services (OJ L 18, 21.1.1997, p. 1).
( 8 ) Directive 2014/67/EU of the European Parliament and of the Council of 15 May 2014 on the enforcement of Directive 96/71/EC concerning the posting of workers in the framework of the provision of services and amending Regulation (EU) No 1024/2012 on administrative cooperation through the Internal Market Information System (‘the IMI Regulation’) (OJ L 159, 28.5.2014, p. 11).
( 9 ) Directive (EU) 2020/1057 of the European Parliament and of the Council of 15 July 2020 laying down specific rules with respect to Directive 96/71/EC and Directive 2014/67/EU for posting drivers in the road transport sector and amending Directive 2006/22/EC as regards enforcement requirements and Regulation (EU) No 1024/2012 (OJ L 249, 31.7.2020, p. 49).
( 10 ) Commission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (OJ L 139, 26.5.2016, p. 1).
( 11 ) Regulation (EC) No 1072/2009 of the European Parliament and of the Council of 21 October 2009 on common rules for access to the international road haulage market (OJ L 300, 14.11.2009, p. 72).
( *1 ) OJ L 15, 21.1.1998, p. 14.’.
( 12 ) Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (OJ L 263, 9.10.2007, p. 1).
( 13 ) These figures are shown for guidance only.
( 14 ) Delete items not applicable.
( 15 ) Tick the relevant boxes.
( 16 ) Specify the component dealt with in the notification.