31990R1730

COUNCIL REGULATION (EEC) No 1730/90 of 20 June 1990 temporarily suspending the autonomous Common Customs Tariff duty on certain industrial products (in the chemical and allied sectors)

THE COUNCIL OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Economic Community, and in particular Article 28 thereof,

Having regard to the proposal from the Commission,

Whereas production of the products referred to in this Regulation is at present inadequate or non-existent within the Community and producers are thus unable to meet the needs of user industries in the Community;

Whereas it is in the Community's interest in certain cases to suspend the autonomous Common Customs Tariff duties only partially, particularly because of the existence of Community production, and in other cases to suspend them completely;

Whereas, taking account of the difficulties involved in accurately assessing the development of the economic situation in the sectors concerned in the near future,

these suspension measures should be taken only

temporarily, by fixing their period of validity by reference to the interests of Community production,

HAS ADOPTED THIS REGULATION:

Article 1

The autonomous Common Customs Tariff duties for the products listed in the tables appearing in the Annexes shall be suspended at the level indicated in respect of each of them.

These suspensions shall apply:

-from 1 July to 30 September 1990 for the product listed in the table apearing in Annex I,

-from 1 July to 31 December 1990 for the products listed in the table appearing in Annex II,

-from 1 July 1990 to 30 June 1991 for the products listed in the table appearing in Annex III.

Article 2

This Regulation shall enter into force on 1 July 1990.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Luxembourg, 20 June 1990.

For the CouncilThe PresidentD. J. O'MALLEY

ANNEX I

ex 2712 90 901-Alkenes of a chain-length of 18 carbon atoms or more but not exceeding 30 carbon atoms0

ANNEX II

ex 2843 90 90 ex 3004 90 99Carboplatin (INN)0

ex 2903 30 10Carbon tetrafluoride (tetrafluoromethane)0

ex 2907 29 906,6,6-Tri-tert-butyl-4,4,4-(1-methylpropan-1-yl-3-ylidene)tri-m-cresol, whether or not

containing toluene of crystallization0

ex 2908 10 904,4-(Perfluoroisopropylidene)diphenol0

ex 2910 90 001,2-Epoxybutane0

ex 2918 19 90Pravastatin sodium (INNM)3,5

ex 2918 19 90Ammonium (3R,5R)-7-[(1S,2S,6R,8S,8aR)-8-(2,2-dimethylbutyryloxy)-1,2,6,7,8,8a-hexahydro-2,6-dimethyl-

1-naphthyl]-3,5-dihydroxyheptanoate3,5

ex 2918 29 90Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate0

ex 2926 90 902-Cyanoacetamide0

ex 2926 90 90(-)-N-(a-Cyano-4-hydroxy-3-methoxy-a-methylphenethyl)acetamide0

ex 2928 00 00Carbidopa (INN)0

ex 2929 10 00m-Isopropenyl-a,a-dimethylbenzyl isocyanate0

ex 2930 90 80Probucol (INN)3,8

ex 2931 00 902-Chloroethylphosphonic acid3,8

ex 2932 29 90Etoposide (INN)0

ex 2933 39 902-(4-Pyridyl)ethanesulphonic acid0

ex 2933 59 901,4-Diazabicyclo[2.2.2]octane (triethylenediamine)0

ex 2933 90 60Estazolam (INN)4

ex 2934 90 60Etizolam (INN)4

ex 2934 90 60Clotiazepam (INN)4

ex 2934 90 60Teniposide (INN)0

ex 2935 00 00Sulfadimethoxine (INN) and its sodium salt3,3

ex 2940 00 90Ribose0

ex 2941 10 00Piperacillin (INN)4,1

ex 2941 10 00 ex 3004 10 10Piperacillin sodium (INNM)3,6

ex 2941 30 00Minocycline (INN) and its salts0

ex 2941 90 00Josamycin (INN)2,7

ex 2941 90 00Josamycin propionate (INNM)2,7

ex 2941 90 00Midecamycin (INN) and its acetates2,7

ex 2941 90 00Rokitamycin (INN)2,7

ex 2941 90 00Clindamycin (INN) and its salts and esters0

ex 2941 90 00Kanamycin sulphate (INNM)0

ex 2941 90 00Lincomycin (INN) and its salts and esters, for the manufacture of medicaments of heading No 3003 or 3004 (a)0

ex 2941 90 00Cefotetan (INN)0

ex 2941 90 00Ceftizoxime sodium (INNM)0

ex 2941 90 00Cefotiam dihydrochloride (INNM)0

ex 2941 90 00Cefmenoxime hemihydrochloride (INNM)0

ex 2941 90 00 ex 3004 20 90Amikacin (INN) and its salts0

ex 3004 90 19Purified collagen dispersed in a phospate physiological saline solution, whether or not containing lidocaine (INN)3

ex 3004 90 99Preparation containing des-1-alanine-(125-serine) interleukin-2 (human), obtained from genetically-manipulated Escherichia coli0

ex 3701 91 00Film in the flat, put up in disc form and incorporated in a cartridge5,3

ex 3802 90 00Acid-activated montmorillonite, for the manufacture of self-copy paper (a)0

ex 3805 20 00Pine oil1,7

ex 3805 90 00Crude dipentene1,7

ex 3815 90 00Catalyst, consisting of dialkyldimethylammonium acetate of chain-lengths of 16 and 18 carbon atoms, suspended in organic solvents to a concentration by weight of 40% or more0

ex 3901 10 90Polyethylene, containing by weight 0.25% or more of carbonyl groups in the chain, in the form of pellets0

ex 3901 20 00Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity

of 0.945 or more but not more than 0.985, for the manufacture of typewriter ribbon or similar

ribbon (a)0

ex 3901 90 00Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid4

ex 3901 90 00Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid0

ex 3903 90 00Copolymer, entirely of maleic anhydride with styrene, or entirely of maleic anhydride with styrene and an acrylic monomer, whether or not containing a styrene-butadiene block copolymer, in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3906 90 00Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR)0

ex 3907 20 90a-4-Hydroxybutyl-o-hydroxypoly(oxytetramethylene), containing less than 1 mg/kg of halogen and of metal, and of a colour not exceeding 20 units on the Hazen scale0

ex 3909 40 00Polycondensation products of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 micrometres0

ex 3911 90 10Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene), in one of the forms mentioned in note 6 (b) to Chapter 393,5

ex 3919 90 31 ex 3920 62 00 ex 3921 90 19Polyethylene terephthalate film, dyed in the mass, of a thickness not exceeding 25 micrometres and metallized on one side6

ex 3920 42 11 ex 3920 42 91Reflecting polyvinyl chloride sheeting, wholly embossed on one side in a regular pyramidal pattern, not containing microspheres0

ex 3920 62 00 ex 3920 63 00 ex 3920 69 00Reflecting polyester sheeting embossed in a regular pyramidal pattern, not containing microspheres0

ex 3920 62 00 ex 3920 69 00 ex 3921 90 19Iridescent film of polyester with polyethylene0

ex 3920 99 50Film of a mixture of polyvinylidene fluoride with an acrylic polymer, of a thickness of 40 micrometres or more but not exceeding 60 micrometres0

ex 4811 21 00Impregnated paper coated or covered with a pressure-sensitive self-adhesive layer, the whole:

-of a tensile of 2200 N/m or more but not exceeding 3400 N/m (as determined by the DIN 53455 method),

-of a stretch factor of 3,0% or more but not exceeding 4,5% (as determined by the DIN 53455 method)

and of adhesivity on stainless steel (as determined by the Finat FTM 1 method):

-of 50 N/m or more but not exceeding 225 N/m, at a temperature of 23C (+/- 3C) and a relative humidity of 50% (+/- 5%)

-not exceeding 250 N/m after aging for three weeks at a temperature of 70C

0

ex 5509 41 10 ex 5509 41 90 ex 5509 42 10 ex 5509 42 90Flame-resistant textile-fibre yarn, containing by weight 85% or more of acetalised polyvinyl alcohol [vinylal (ISO)] and not more than 15% of modal (ISO)0

ex 5603 00 93 ex 5603 00 95Nonwovens of polypropylene consisting of a melt-blown central layer, laminated on each side with spun-bonded fibres, of a thickness not exceeding 550 micrometres and of a weight not exceeding

80 g/m2, in the piece or simply cut into rectangular shape, not impregnated0

ex 5911 10 00Needle-punched synthetic fibre felts on a woven synthetic fibre base not containing polyester, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration pro-

ducts (a)0

ex 5911 10 00Needle-punched polyester felts on a woven polyester base, coated or covered on one side with polytetrafluoroethylene film, of a weight not exceeding 500 g/m2, for the manufacture of filtration products (a)0

ex 6305 10 10Sacks and bags, of a kind used for the packing of goods, used, of jute or of other textile bast fibres of heading No 53030

ex 6305 90 00Sacks and bags, of a kind used for the packing of goods, used, of flax or of sisal0

ex 6903 20 90 ex 6914 90 90Yarn of continuous ceramic filaments, each filament containing by weight 12% or more of diboron trioxide, not more than 26% of silicon dioxide and 60% or more of dialuminium trioxide0

ex 6909 19 00Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces of roughly circular, square, rectangular, oval or asymmetrical cross-section, of an overall volume not exceeding

65 000 ml, and of an external dimension of 20 mm or more but not exceeding 1 800 mm, having, per 100 mm2 and running parallel to the main axis of symmetry, not less than one continuous channel which may be open at both ends or stopped at one end, with a total channel cross-sectional area of 10% or more but not exceeding 90% of the whole cross-sectional area0

ex 8111 00 11Electrolytic manganese of a purity by weight of 99.7% or more, for the manufacture of non-ferrous alloys (a)0

ex 8112 99 30Alloy of niobium (columbium) and titanium, in the form of bars and rods0

aControl of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.

ANNEX III

ex 1518 00 90Inedible mixtures of animal or vegetable fats and oils, or their fractions2

ex 2707 99 11Crude light oils containing by weight:

-10% or more of vinyltoluenes

-10% or more of indene

-1% or more but not more than 5% of naphthalene

0

ex 2707 99 99Mineral oil containing by weight:

-more than 60% of aromatic constituents,

-less than 0.7% of sulphur,

and of which not more than 15% by volume distils at 250oC, for the manufacture of needle

cokes (a)0

ex 2712 20 00Synthetic paraffin wax of a molecular weight of 460 or more but not exceeding 15600

ex 2804 29 00Helium0

ex 2805 30 10Alloy of cerium and other rare earth metals, containing by weight 47% or more of cerium0

ex 2810 00 00Diboron trioxide0

ex 2811 19 00Sulphamidic acid0

ex 2811 29 90Tellurium dioxide0

ex 2818 30 00Aluminium hydroxide oxide in the form of pseudo-boehmite4

ex 2819 90 00Chromium dioxide0

ex 2820 90 00Manganese oxide containing by weight 77% or more of manganese0

ex 2827 60 00Titanium tetraiodide0

ex 2835 26 90Pentacalcium hydroxide tris(orthophosphate), for use in non-ferrous metallurgy (a)0

ex 2836 91 00Lithium carbonates not corresponding to the following specifications:

-in the form of white powder

and

-containing by weight 98,5% or more of Li2CO3

and containing:

-less than 2 mg/kg of arsenic

-less than 200 mg/kg of calcium

-less than 200 mg/kg of chlorides

-less than 20 mg/kg of iron

-less than 150 mg/kg of magnesium

-less than 20 mg/kg of heavy metals

-less than 300 mg/kg of potassium

-less than 300 mg/kg of sodium

-less than 200 mg/kg of sulphates

0

ex 2840 11 00

ex 2840 20 10Borates of sodium, anhydrous0

ex 2840 19 00Disodium tetraborate pentahydrate0

ex 2841 80 00Calcium tungstate (wolframate), for the manufacture of ferro-alloys or decaammonium-

41-oxododecawolframate (ammonium paratungstate) (a)0

ex 2845 10 00Heavy water (deuterium oxide) (Euratom)0

ex 2845 90 10Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)0

ex 2902 90 90Vinyltoluenes0

ex 2902 90 90Tricyclo[8.2.2.24,7]hexadeca-1(12),4,6,10,13,15-hexaene0

ex 2902 90 90p-Cymene0

ex 2903 30 39Dibromomethane0

ex 2903 40 99Bromochloromethane0

ex 2903 59 001,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo[12.2.1.16,9.02,13.05,10]octadeca-7,15-

diene, for use in the manufacture of polyamide, polyethylene and synthetic rubber (a)0

ex 2903 69 00Di- or tetrachlorotricyclo[8.2.2.24,7]hexadeca-1(12),4,6,10,13, 15-hexaene, mixed isomers0

ex 2904 10 00Sodium prop-2-ene-1-sulphonate of a purity of 93% or more by weight, in powder form, for the manufacture of acrylic fibres (a)0

ex 2904 20 90Nitromethane0

ex 2904 20 901-Nitropropane0

ex 2904 20 902-Nitropropane0

ex 2904 20 90Nitroethane0

ex 2904 90 102,2,2-Trifluoroethyl trichloromethanesulphonate0

ex 2905 19 10Potassium tert-butoxide0

ex 2905 39 90Butane-1,3-diol0

ex 2905 39 902,4,7,9-Tetramethyldec-5-yne-4,7-diol0

ex 2905 50 902,2-Bis(bromomethyl)propanediol0

ex 2906 11 00Menthol0

ex 2906 19 00Labd-14-ene-8,13-diol0

ex 2907 29 902,5-Di(tert-pentyl)hydroquinone0

ex 2909 30 302-Bromo-6-methoxynaphthalene0

ex 2909 30 301,2-Bis(2,4,6-tribromophenoxy)ethane for the manufacture of acrylonitrile-butadiene-styrene

(ABS) (a)0

ex 2909 49 102-(2-Chloroethoxy)ethanol0

ex 2909 49 102,2,2,2-Tetrakis(hydroxymethyl)-3,3-oxydipropan-1-ol0

ex 2910 90 002,3-Epoxypropan-1-ol (glycidol)0

ex 2914 19 005-Methylhexan-2-one0

ex 2914 19 003,3-Dimethylbutanone0

ex 2914 49 0011a,17,21-Trihydroxy-16v-methylpregna-1,4-diene-3,20-dione0

ex 2914 50 004-Methoxy-4-methylpentan-2-one0

ex 2914 50 006-Methoxy-2-propiononaphthone0

ex 2914 69 001,4-Naphthoquinone0

ex 2914 69 00Ubidecarenone (INN) (coenzyme Q10)0

ex 2914 70 901-Chloro-3,3-dimethylbutanone0

ex 2915 39 9020-Oxopregna-5,16-dien-3v-yl acetate0

ex 2915 60 101-Isopropyl-2,2-dimethyltrimethylene diisobutyrate0

ex 2915 90 90Trimethyl orthoacetate0

ex 2916 14 002,3-Epoxypropyl methacrylate0

ex 2916 19 90Butyl perchlorocrotonate0

ex 2916 39 00Methyl 3-chlorobenzoate0

ex 2917 13 00Azelaic acid and sebacic acid0

ex 2917 19 90Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate0

ex 2917 20 008,9,10-Trinorborn-5-ene-2,3-dicarboxylic anhydride0

ex 2917 39 10Tetrabromophthalic anhydride0

ex 2917 39 90Benzene-1,2,4-tricarboxylic acid0

ex 2917 39 90Benzene-1,2,4-tricarboxylic acid 1,2-anhydride0

ex 2917 39 90Benzene-1,2,4-tricarbonyl trichloride0

ex 2917 39 90Tetrachlorophthalic anhydride0

ex 2918 19 902,2-Bis(hydroxymethyl)propionic acid0

ex 2918 19 90Dinoprost (INN), for the manufacture of human medicaments of heading No 3004 (a)0

ex 2918 29 90Pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]0

ex 2918 90 00Dinoprostone (INN)0

ex 2918 90 00Alprostadil (INN)0

ex 2918 90 002,6-Dimethoxybenzoic acid0

ex 2920 90 10Diethyl sulphate0

ex 2920 90 80O,O-Bis(2,4-di-tert-butylphenyl)pentaerythritol bis(phosphite)0

ex 2920 90 80O,O-Dioctadecyl pentaerythritol bis(phosphite)0

ex 2921 19 901,1,3,3-Tetramethylbutylamine0

ex 2921 29 00Tetramethylenediamine in aqueous solution, having in the water-free material:

-a purity by weight of 99,9% or more

-a pyrrolidine content of not more than 0,03% by weight

-an aminobutyronitrile content of not more than 0,02% by weight

0

ex 2921 29 00N,N,N,N-Tetrabutylhexamethylenediamine0

ex 2921 30 90Cyclohex-1,3-ylenediamine (1,3-diaminocyclohexane)0

ex 2921 49 10a,a,a-Trifluoro-2,3-xylidine0

ex 2921 49 90Selegiline hydrochloride (INNM)0

ex 2921 59 00m-Phenylenebis(methylamine)0

ex 2922 19 00Dinoprost (INN), trometamol (INN) salt0

ex 2922 19 001-Deoxy-1-(octylamino)-D-glucitol0

ex 2922 19 00Tulobuterol hydrochloride (INNM)0

ex 2922 49 90Tranexamic acid (INN)0

ex 2922 49 90v-Alanine0

ex 2922 50 00Metipranolol (INN)0

ex 2922 50 00Nadolol (INN)0

ex 2924 10 002-Acrylamido-2-methylpropanesulphonic acid and its sodium or ammonium salts0

ex 2924 29 905-{(R)-1-Hydroxy-2-[(R)-1-methyl-3-phenylpropylamino]ethyl}salicylamide-2,3-di-O-benzoyl-(+)-

tartaric acid (1/1)0

ex 2925 11 00Saccharin and its sodium salt0

ex 2925 19 103,3,4,4,5,5,6,6-Octabromo-N,N-ethylenediphthalimide0

ex 2925 19 90N-Phenylmaleimide0

ex 2926 90 90Etocrilene (INN)0

ex 2926 90 90Octocrilene (INN)0

ex 2926 90 90Isophthalonitrile6

ex 2926 90 902-(3-Phenoxyphenyl)propiononitrile0

ex 2928 00 00Robenidine hydrochloride (INNM)0

ex 2928 00 00N,N-Diethylhydroxylamine0

ex 2928 00 003,3-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N-bipropionamide0

ex 2928 00 002,4,6-Trichlorophenylhydrazine0

ex 2929 10 00m-Phenylenediisopropylidene diisocyanate0

ex 2929 10 00Methylenedicyclohexyl diisocyanate, mixed isomers0

ex 2929 10 00p-Phenylene diisocyanate0

ex 2929 10 00trans-(Cyclohex-1,4-ylene diisocyanate), for the manufacture of thermoplastic polyurethane elastomers (a)0

ex 2929 10 003,3-Dimethylbiphenyl-4,4-diyl diisocyanate0

ex 2930 90 10Cilastatin sodium (INNM)0

ex 2930 90 80Thiophanate-methyl (ISO)0

ex 2930 90 803,3-Dimethyl-1-methylthiobutanone oxime0

ex 2930 90 80Netobimin (INN)0

ex 2930 90 80Thiophenol0

ex 2930 90 802,2-Thiodiethyl bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]0

ex 2930 90 80Ethoprophos (ISO)0

ex 2931 00 90Chlorodiphenylphosphine0

ex 2931 00 902-Diphenylphosphinobenzoic acid0

ex 2932 11 00Tetrahydrofuran, containing not more than 40 mg per litre in total of tetrahydro-2-methylfuran and tetrahydro-3-methylfuran, for the manufacture of a-4-hydroxybutyl-o-hydroxypoly

(oxytetramethylene) (a)0

ex 2932 13 00Tetrahydrofurfuryl alcohol0

ex 2932 19 00Furan of a purity by weight of 99% or more0

ex 2932 29 902-Anilino-6-[ethyl(isopentyl)amino]-3-methylspiro[isobenzofuran-1(3H),9-xanthen]-3-one0

ex 2932 29 902-Chloro-6-(diethylamino)-3-methylspiro[isobenzofuran-1 (3H),9-xanthen]-3-one0

ex 2932 29 90Glucurolactone (INN)0

ex 2932 29 9013,14,15,16-Tetranorlabdano-12,8a-lactone0

ex 2932 29 901-Hydroxy-4-[1-(4-hydroxy-3-methoxycarbonyl-1-naphthyl)-3-oxo-1H,3H-benzo[de]isochromen-1-yl]-6-octadecyloxy-2-naphthoic acid0

ex 2932 29 903-Chloro-6-cyclohexylaminospiro[isobenzofuran-1(3H),9-xanthen]-3-one0

ex 2932 29 906-(N-Ethyl-p-toluidino)-2-(N-methylanilino)spiro[isobenzofuran-1(3H),9-xanthen]-3-one0

ex 2932 29 906-(N-Ethyl-p-toluidino)-2-methylspiro[isobenzofuran-1 (3H),9-xanthen]-3-one0

ex 2932 29 902-Anilino-6-(N-ethyl-p-toluidino)-3-methylspiro[isobenzofuran-1(3H),9-xanthen]-3-one0

ex 2932 90 70Bendiocarb (ISO)0

ex 2932 90 70Glucosamine hydrochloride (INNM)0

ex 2932 90 70(25R)-Spirost-5-en-3v-ol (diosgenin) and its esters0

ex 2933 29 90Enoximone (INN)0

ex 2933 39 90Obidoxime chloride (INN)0

ex 2933 39 90Pyridine-2,3-dicarboxylic acid0

ex 2933 39 90Diphemanil metilsulphate (INN)0

ex 2933 39 902,3,5,6-Tetrachloropyridine0

ex 2933 39 90Flunixin meglumine (INNM)0

ex 2933 39 90Isonicotinonitrile0

ex 2933 39 903,6-Dichloropyridine-2-carboxylic acid0

ex 2933 39 902-Hydroxyethylammonium 3,6-dichloropyridine-2-carboxylate0

ex 2933 39 902-Butoxyethyl (3,5,6-trichloro-2-pyridyloxy)acetate0

ex 2933 39 903,5-Dichloro-2,4,6-trifluoropyridine0

ex 2933 39 904,4-Bis(hydroxyiminomethyl)-1,1-(oxydimethylene)dipyridinium dichloride0

ex 2933 39 90(RS)-1-[2-(4-Chlorobenzhydryloxy)ethyl]piperidine and its salts0

ex 2933 39 90Carpipramine dihydrochloride (INNM)0

ex 2933 39 90Encainide hydrochloride (INNM)0

ex 2933 59 90Amprolium hydrochloride (INNM)0

ex 2933 59 901-Ethyl-6-fluoro-1,4-dihydro-4-oxo-7-piperazin-1-yl-1,8-naphthyridine-3-carboxylic acid and its salts and esters0

ex 2933 69 902,6-Di-tert-butyl-4-[4,6-bis(octylthio)-1,3,5-triazin-2-ylamino]phenol0

ex 2933 69 901,3,5-Tris(4-tert-butyl-3-hydroxy-2,6-dimethylbenzyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trione0

ex 2933 79 00Carteolol hydrochloride (INNM)0

ex 2933 90 90Octrizole (INN)0

ex 2933 90 90Drometrizole (INN)0

ex 2933 90 902,4-Di-tert-butyl-6-(5-chlorobenzotriazol-2-yl)phenol0

ex 2933 90 90Captopril (INN)0

ex 2933 90 90Tryptophan, of a purity by weight not exceeding 98.5%, for the manufacture of goods of heading No 2309 (a)0

ex 2933 90 90(2S)-1-(3-Acetylthio-2-methyl-1-oxopropyl)-L-proline0

ex 2934 30 9010-Benzoyl-3,7-bis(dimethylamino)phenothiazine0

ex 2934 90 60Tiquizium bromide (INN)0

ex 2934 90 60Timepidium bromide (INN)0

ex 2934 90 70Timolol (INN)0

ex 2934 90 70Ofloxacin (INN)0

ex 2934 90 90p-Methoxybenzyl-3-chloromethyl-7-(2-phenylacetamido)-3-cephem-4-carboxylate0

ex 2934 90 90p-Methoxybenzyl-(Z)-7-(2-phenylacetamido)-3-prop-1-enyl-3-cephem-4-carboxylate0

ex 2934 90 90Benzhydryl-(Z)-7-(2-phenylacetamido)-3-prop-1-enyl-3-cephem-4-carboxylate0

ex 2934 90 90Zotepine (INN)4

ex 2934 90 901-Ethyl-1,4-dihydro-4-oxo[1,3]dioxolo[4,5-g]cinnoline-3-carbonitrile0

ex 2934 90 902-Chlorodibenz[bf][1,4]oxazepin-11(10H)-one0

ex 2934 90 90 (6R,7R)-3-Acetoxymethyl-7-[(R)-2-formyloxy-2-phenylacetamido]-8-oxo-5-thia-1-azabicyclo

[4.2.0]oct-2-ene-2-carboxylic acid and its salts and esters0

ex 2934 90 90Bis(2-hydroxyethyl) (9,10-dihydro-10-oxo-9-oxa-10-l5-phospha-10-phenanthrylmethyl) succinate0

ex 2934 90 90Adenosine phosphate (INN)0

ex 2934 90 903-(1-Ethyl-1-methylpropyl)isoxazol-5-ylamine0

ex 2934 90 90(2,3-Dihydro-3-oxobenz[d]isothiazol-2-yl)-N-5-methylisoxazol-3-ylacetamide S,S-dioxide0

ex 2934 90 90Tegafur (INN)0

ex 2935 00 003-[1-(7-Hexadecane-1-sulphonamidoindol-3-yl)-3-oxo-1H,3H-benz[de]isochromen-1-yl]indole-7-

carboxylic acid0

ex 2935 00 00Sulfaguanidine (INN)0

ex 2935 00 00Sulfathiazole (INN) and its salts0

ex 2936 24 00Dexpanthenol (INN)0

ex 2936 29 10Folic acid (INN)0

ex 2937 10 10Serum gonadotrophin (INN)0

ex 2937 10 90Protirelin tartrate (INNM)0

ex 2937 29 90Alclometasone 17,21-dipropionate (INNM)0

ex 2937 29 90Methylprednisolone (INN) and its salts and esters0

ex 2937 29 90Mometasone furoate (INNM)0

ex 2937 99 00Calcitonin (INN), salmon-type and its salts0

ex 2937 99 00Calcitonin (INN), porcine0

ex 2939 30 00Caffeine and its salts4,1

ex 2940 00 90Sucrose benzoate, having a saponification equivalent not exceeding 1750

ex 2941 90 00Kitasamycin (INN) and its tartrate0

ex 2941 90 00Amphotericin B (INN)0

ex 2941 90 00Cefixime (INN)0

ex 2941 90 00Monensin (INN) and its salts0

ex 2941 90 00Pirarubicin (INN)0

ex 2941 90 00Spectinomycin dihydrochloride (INNM), pentahydrate0

ex 2941 90 00Nystatin (INN)0

ex 2941 90 00Sisomicin sulphate (INNM)0

ex 2941 90 00Spectinomycin sulphate (INNM)0

ex 2941 90 00Tobramycin (INN) and its salts0

ex 2941 90 00Cefaclor (INN) and its hydrates, salts and esters0

ex 2941 90 00Netilmicin sulphate (INNM)0

ex 2941 90 00Dibekacin sulphate (INNM)0

ex 2941 90 00Cefoxitin sodium (INNM)0

ex 2941 90 00Cefradine (INN)0

ex 2941 90 00Latamoxef (INN) and its salts and esters0

ex 2941 90 00Ribostamycin sulphate (INNM)0

ex 2941 90 00Aztreonam (INN)0

ex 2941 90 00Imipenem (INN)0

ex 2941 90 00Neomycin sulphate (INNM)0

ex 2941 90 00Lasalocid sodium (INNM)0

ex 2941 90 00 ex 3004 20 90Vancomycin (INN) and its salts and esters0

ex 2941 90 00 ex 3004 20 90Mitomycin (INN)0

ex 2941 90 00 ex 3004 20 90Bleomycin sulphate (INNM)0

ex 3002 10 10Tetanus-immunoglobulin0

ex 3002 10 10Anti-tetanus immunoplasma0

ex 3002 10 10Rabies immunoplasma0

ex 3002 10 91Anti-haemophilic globulin and anti-Rho(D)-globulin derived from human blood0

ex 3002 10 91Gamma globulin, in solution, derived from human blood0

ex 3002 10 91Lyophilized gamma globulin derived from human blood0

ex 3002 10 99Unsterile blood serum obtained from the blood of a bovine foetus or non-immunized newly born calf0

ex 3002 39 00Vaccine consisting of a bacterium obtained by isolating R-980 from Mycoplasma gallisepticum, in an oil-based emulsion0

ex 3003 20 00Mixture of cefradine (INN) and arginine (INN)0

ex 3003 39 00Mixture of oestrogens of equine origin, in the form of powder0

ex 3003 40 00Granules containing by weight 40% or more but not more than 50% of theophylline0

ex 3003 90 90Granules containing by weight 0,7% or more but not more than 1,2% of glycerol trinitrate0

ex 3005 10 00Self-adhesive plastic film, coated or covered on one side with glycerol trinitrate mixed with an acrylic adhesive, containing 4 mg/cm2 or more of glycerol trinitrate, protected by a release sheet, not put up in forms or packings for retail sale0

ex 3201 20 00Tanning extracts of wattle (mimosa)0

ex 3201 90 90Tanning extracts derived from gambier and myrobalan fruits0

ex 3201 90 90Tanning extracts of eucalyptus3,2

ex 3207 40 90Glass, in the form of flakes of a length of 0.1 mm or more but not exceeding 3,5 mm and of a thickness of 2 micrometres or more but not exceeding 5 micrometres0

ex 3207 40 90Glass, in the form of powder or granules, containing by weight 99% or more of silicon dioxide0

ex 3208 90 10 ex 3909 50 00Polyurethane of 2,2-(tert-butylimino)diethanol and 4,4-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N-dimethylacetamide containing by weight 48% or more of polymer0

ex 3208 90 10 ex 3911 90 90Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide containing by weight 48% or more of polymer0

ex 3402 11 00Aqueous solution containing by weight 30% or more but not more than 50% of disodium alkyl [oxydi(benzenesulphonate)]0

ex 3402 90 10Mixture of docusate sodium (INN) and sodium benzoate0

ex 3505 10 50O-(2-Hydroxyethyl)amylopectin hydrolysate0

ex 3507 90 00Bromelains (INN)0

ex 3507 90 00Pyruvate: oxygen oxidoreductase0

ex 3507 90 00Lipoprotein lipase0

ex 3507 90 00Serrapeptase (INN)0

ex 3507 90 00Aspergillus alkaline proteinase0

ex 3702 31 90Colour negative film, of a width of 75 mm or more but not exceeding 105 mm and of a length of 100 m or more, for the manufacture of instant picture film packs (a)0

ex 3805 10 30Wood turpentine1,7

3805 10 90Sulphate turpentine0

ex 3805 90 00Sulphite turpentine; other terpenic oils produced by the distillation or other treatment of coniferous woods1,7

ex 3806 90 00Hydroabietyl alcohol0

ex 3809 91 00Mixture of (5-ethyl-2-methyl-2-oxo-1,3,2l5-dioxaphosphoran-5-ylmethyl) methyl methyl-

phosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2l5-dioxaphosphoran-5-ylmethyl) methyl-

phosphonate0

ex 3811 21 00Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils0

ex 3812 20 00Reaction mixture containing benzyl 3-isobutyryloxy-1-isopropyl-2,2-dimethylpropyl phthalate and benzyl 3-isobutyryloxy-2,2,4-trimethylpentyl phthalate0

ex 3812 30 80Tetraaluminium nonamagnesium dicarbonate hexacosahydroxide heptahydrate, coated with a surface active agent0

ex 3815 11 00Catalyst, in the form of granules, consisting of a mixture of oxides on an aluminium oxide support and containing by weight:

-12% or more but not more than 20% of nickel,

-5% or more but not more than 10% of copper,

-0,5% or more but not more than 1,5% of manganese,

of a pore volume of 0,25 cm3/g or more but not exceeding 0,95 cm3/g and of an apparent specific gravity of 0,5 or more but not exceeding 1,250

ex 3815 12 00Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not exceeding 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8% or more but not more than 20% of silver0

ex 3815 19 00Catalyst consisting of titanium tetrachloride supported on magnesium dichloride, in the form of a suspension in mineral oil, for use in the manufacture of polypropylene (a)0

ex 3815 19 00Catalyst, in the form of spherical grains of a diameter of 1,4 mm or more but not exceeding 1,8 mm, consisting of boron trifluoride on an aluminium oxide support0

ex 3815 19 00Catalyst, consisting of chromium trioxide or dichromium trioxide fixed on a silicon dioxide support, of a pore volume, as determined by the nitrogen absorption method, of 2 cm3/g or more0

ex 3815 19 00Catalyst consisting of chromium oxides and titanium dioxide fixed on a support of silicon dioxide, aluminium oxide or aluminium phosphate0

ex 3815 19 00Catalyst, in the form of grains of which 90% or more by weight have a particle size not exceeding 10 micrometres, consisting of a mixture of oxides on a magnesium silicate support, containing by weight:

-20% or more but not more than 35% of copper,

-2% or more but not more than 3% of bismuth,

and of an apparent specific gravity of 0,2 or more but not exceeding 1,00

ex 3815 90 00Catalyst, in the form of rodlets of a diameter of 4 mm or more but not exceeding 6mm, consisting of a mixture of oxides containing by weight more than 96% of oxides of molybdenum, vanadium, nickel and antimony, for use in the manufacture of acrylic acid (a)0

ex 3815 90 00Catalyst, in the form of rodlets of a diameter of 4 mm or more but not exceeding 6 mm, consisting of a mixture of oxides containing by weight more than 96% of oxides of molybdenum, bismuth, nickel, iron and silicon, for use in the manufacture of acrylaldehyde (a)0

ex 3815 90 00Catalyst, in the form of rodlets of a length of 3 mm or more but not exceeding 6 mm and of a diameter not exceeding 3.8 mm, containing by weight 18% or more but not more than 21% of dichromium trioxide and 78% or more but not more than 81% of aluminium oxide, for use in the manufacture of benzene, toluene, propene or 2-methylpropene (a)0

ex 3815 90 00Catalysts, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight 20% or more but not more than 30% of titanium and 55% or more but not more than 72% of chlorine0

ex 3815 90 00Catalyst, in the form of a suspension in oil, consisting of titanium trichloride and aluminium trichloride, containing by weight (on an oil-free basis) 15% or more but not more than 30% of titanium and 40% or more but not more than 72% of chlorine0

ex 3815 90 00Catalyst containing titanium trichloride, in the form of a suspension in hexane containing by weight, in the hexane-free material, 14% or more but not more than 17% of titanium0

ex 3815 90 00Catalyst, in the form of pellets, consisting of mixed vanadium and phosphorus oxides, containing by weight not more than 0.5% of one of the following elements: lithium, potassium, sodium, cadmium or zinc, for use in the manufacture of maleic anhydride from butane (a)0

ex 3815 90 00Catalyst, consisting of a mixture of titanium, magnesium and aluminium compounds, in the form of a suspension in hexane, containing by weight:

-3% or more but not more than 6% of titanium,

-1.5% or more but not more than 3% of magnesium,

-0.3% or more but not more than 0.5% of aluminium,

for use in the manufacture of polyethylene of a specific gravity of 0.930 or more (a)0

ex 3815 90 00Catalyst, in the form of rodlets, consisting of an acid aluminosilicate (zeolite) with a mole ratio of silicon dioxide : dialuminium trioxide of not less than 500 : 1 and containing by weight 0.2% or more but not more than 0.8% of platinum0

ex 3818 00 10Doped silicon wafers, of Czochralski technology, of a diameter of 70 mm or more, unpolished and containing 5×1017 or more of oxygen atoms per cm30

ex 3822 00 00Lyophilized extract of the blood cells of Limulus polyphemus (Limulus amoebocyte lysate)0

ex 3823 90 20Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11% of sodium expressed as sodium oxide, in the form of rodlets0

ex 3823 90 91Diosgenin crude0

ex 3823 90 914-(6-Fluoro-2-methylinden-3-ylmethyl)phenyl methyl sulphide, in the form of a solution in toluene0

ex 3823 90 91Residues of manufacture containing by weight 40% or more of 11v,17,20,21-tetra-

hydroxy-6-methylpregna-1,4-dien-3-one-21-acetate0

ex 3823 90 91Intermediate products from the manufacture of monensin salts0

ex 3823 90 91Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Streptomyces tenebrarius, whether or not dried, for use in the manufacture of human medicaments of No 3004 (a)0

ex 3823 90 91Products obtained by the N-ethylation of sisomycin (INN)0

ex 3823 90 91Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora purpurea, whether or not dried0

ex 3823 90 91Cholic acid and 3a,12a-dihydroxy-5v-cholan-24-oic acid (deoxycholic acid), crude0

ex 3823 90 91Crude bile acids0

ex 3823 90 91Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora inyoensis, whether or not dried0

ex 3823 90 914-(2-Aminoethylthiomethyl)-1,3-thiazol-2-ylmethyldimethylamine, in the form of a solution in toluene0

ex 3823 90 98Mixture of lithium diisopropylamide (lithium salt of diisopropylamine) and magnesium bis(diisopropylamide) (magnesium salt of diisopropylamine), in the form of a solution in organic solvents0

ex 3823 90 98Mixture of nitromethane and 1,2-epoxybutane0

ex 3823 90 98Preparation, in the form of powder, containing by weight 75% or more of zinc bis[3,5-bis(1-phenylethyl)salicylate]0

ex 3823 90 98Colloidal diantimony pentaoxide0

ex 3823 90 98Calcined bauxite (refractory grade)0

ex 3823 90 98Tetrakis(2-chloroethyl)ethylene bis(phosphate)5

ex 3823 90 98Grains, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight 70% or more but not more than 78% of dialuminium trioxide and 19% or more but not more than 26% of zirconium dioxide5,2

ex 3823 90 98Grains, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight 54% or more but not more than 62% of dialuminium trioxide and 36% or more but not more than 44% of zirconium dioxide5.2

ex 3823 90 98Magnesium bromide 2-oxoperhydroazepin-1-ide, in the form of a solution in epsilon-caprolactam containing by weight 20% or more but not more than 25% of magnesium bromide 2-oxoperhydroazepin-1-ide0

ex 3823 90 98Reaction products of dibutyl dihydrogendiphosphate and 1,2-epoxypropane, for the manufacture of non-rigid polyurethane (a)0

ex 3823 90 98Film consisting of the oxides of barium, calcium and either titanium or zirconium, mixed with binding materials0

ex 3823 90 98Mixture of amines derived from dimerized fatty acids, of an average molecular weight of 520 or more but not exceeding 5500

ex 3823 90 98Crude lithium hypochlorite0

ex 3823 90 98Mixture of 2-(perfluoroalkyl)ethanethiols of a perfluoroalkyl chain-length of 6 or more carbon atoms but not exceeding 20 carbon atoms0

ex 3823 90 98Butylethylmagnesium, in the form of a solution in organic solvents containing by weight 19% or more but not more than 30% of butylethylmagnesium0

ex 3823 90 98Mixed oxides of barium, bismuth, lead and titanium, in the form of powder, containing by weight 5% or more of barium and 15% or more of titanium, for use as dielectric materials in the manufacture of multilayer ceramic capacitors (a)0

ex 3823 90 98Lithium niobate wafers, undoped0

ex 3823 90 98Magnetisable iron oxide, in the form of powder, containing by weight:

-30% or more but not more than 38% of bivalent iron in relation to the total iron

-1% or more but not more than 4% of cobalt

0

ex 3823 90 98Preparation consisting essentially of alkaline asphalt sulphonate,of a specific gravity of 0,9 or more but not exceeding 1,5, and a solubility in water of 70% by weight or more0

ex 3823 90 98Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either on a support of mineral wax, whether or not modified chemically, or in the form of a solution in an organic solvent0

ex 3901 20 00Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,958 or more at 23oC, containing:

-not more than 50 mg/kg of aluminium,

-not more than 2 mg/kg of calcium,

-not more than 2 mg/kg of chromium,

-not more than 2 mg/kg of iron,

-not more than 2 mg/kg of nickel,

-not more than 2 mg/kg of titanium,

-not more than 8 mg/kg of vanadium,

for the manufacture of chlorosulphonated polyethylene (a)0

ex 3901 20 00Polyethylene, containing by weight 35% or more but not more than 45% of mica0

ex 3901 90 00Copolymer of ethylene with acrylic acid or with methacrylic acid, containing by weight 16% or more but not more than 30% of acrylic acid or methacrylic acid, in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3901 90 00 ex 3902 90 00A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35% of styrene, in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3902 90 00Poly(1-ethylethylene) (polybutene-1), in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3903 90 00Copolymer, solely of allyl alcohol with styrene, of an acetyl value of 175 or more0

ex 3903 90 00Brominated polystyrene, containing by weight 58% or more but not more than 71% of bromine, in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3904 40 00Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight 87% or more but not more than 92% of vinyl chloride, 2% or more but not more than 9% of vinyl acetate and 1% or more but not more than 8% of vinyl alcohol, in one of the forms mentioned in note 6 (a) or (b) to Chapter 390

ex 3904 50 00Copolymer of vinylidene chloride with vinyl chloride, containing by weight 79,5% or more of vinylidene chloride, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of fibres, monofilament or strip (a)0

ex 3904 50 00Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of 4 micrometres or more but not more than 20 micrometres0

ex 3904 69 00Polyvinyl fluoride, in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3904 69 00Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3904 69 00Terpolymer of ethylene with chlorotrifluoroethylene and hexafluoro(2-methylpropene), in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3905 90 00Poly(vinyl formal), in one of the forms mentioned in note 6 (b) to Chapter 39, of a molecular weight of 10 000 or more but not exceeding 40 000 and containing by weight:

-9,5% or more but not more than 13% of acetyl groups, expressed as vinyl acetate

-5% or more but not more than 6,5% of hydroxy groups, expressed as vinyl alcohol

0

ex 3906 10 00Polymethyl methacrylate, in the form of expansible beads containing 2-methylpentane as blowing agent0

ex 3906 90 00Copolymer, entirely of methyl methacrylate with styrene and maleic anhydride, containing by weight 36% or more but not more than 45% of methyl methacrylate, 20% or more but not more than 28% of maleic anhydride and not more than 36% of styrene, in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3906 90 00Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N,N-dimethylacetamide containing by weight 55% or more of copolymer0

ex 3906 90 00Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10% or more but not more than 11% of 2-ethylhexyl acrylate0

ex 3906 90 00Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]0

ex 3906 90 00Polymerization products of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 (a)6

ex 3906 90 00Polymerization products of acrylic acid with small quantities of a polyunsaturated monomer, for use as a thickener in textile pigment printing pastes or in the manufacture of medicaments of heading

No 3003 or 3004 (a)0

ex 3906 90 00Terpolymer of ethylene with methyl acrylate and a monomer containing a non-terminal carboxy group as a substituent, whether or not compounded with silica5

ex 3906 90 00Polymerization products of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as thickeners in the manufacture of textile printing pastes (a)0

ex 3907 20 90Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)0

ex 3907 20 90Copolymer of 1-chloro-2,3-epoxypropane with ethylene oxide0

ex 3907 20 90Poly[oxy(2,6-dibromo-1,4-phenylene)], for the manufacture of polyamide (a)0

ex 3907 20 90Poly[oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxy-(2-hydroxytrimethylene)], of an average molecular weight of more than 26 000, in one of the forms mentioned in note 6 (b) to

Chapter 390

ex 3907 20 90Poly(oxypropylene) having alkoxysilyl end-groups0

ex 3907 20 90Reaction product of poly(oxyalkylene) polyol with a polycarboxylic acid and epsilon-caprolactam0

ex 3907 91 90Diallyl phthalate prepolymer0

ex 3907 99 00Poly(oxy-1,4-phenylenecarbonyl), in the form of powder0

ex 3908 90 00Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3911 90 90Alternating copolymer of ethylene with maleic anhydride, for use as a thickener in textile pigment printing pastes (a)0

ex 3911 90 90Polymerization products of a (polybutadiene)polyol with two lactams N,N-linked by the bivalent acyl radical of a dicarboxylic acid0

ex 3912 11 00Non-plasticized cellulose triacetate, in the form of flakes, for the manufacture of cellulose triacetate yarn (a)0

ex 3912 39 10Ethylcellulose, not plasticized0

ex 3912 39 90Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms0

ex 3912 39 90Hydroxypropylcellulose0

ex 3912 39 90Cellulose, both hydroxyethylated and ethylated, insoluble in water0

ex 3912 90 10Cellaburate (INN), non-plasticized, in the form of powder, with a butyryl content by weight of 25% or more, as determined by the ASTM D 817-72 method, and of a viscosity not exceeding 57 poise, as determined by the ASTM D 817-72 method, for use as a binding agent in the manufacture of paints or lacquers for cars and aircraft (a)0

ex 3914 00 00Colestipol hydrochloride (INNM)0

ex 3915 90 93 ex 3915 90 99Waste and scrap of photographic (including cinematographic) and X-ray film0

ex 3915 90 99Waste and scrap from polyester film coated with a tungsten compound or with rare-earth metal compounds0

ex 3919 90 31 ex 3920 62 00 ex 3921 90 19Reflecting laminated sheeting, metallized, consisting of one sheet of polyester and at least another sheet of polyester or other plastic material and coated on one side with an adhesive, whether or not protected by a release sheet0

ex 3919 90 50Polyvinyl chloride sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded hollow glass balls of a diameter not exceeding 100 micrometres0

ex 3920 10 11Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photo-resist film used in the manufacture of semiconductors (a)0

ex 3920 10 11 ex 3920 10 19 ex 3921 90 60Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene

with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate0

ex 3920 10 11 ex 3921 90 19Laminated plastic sheet or strip, either:

-of a width of 190 mm or more, consisting of a layer of biaxially-orientated polyamide film, coated, on one side, with polyvinylidene chloride and, on the other side, with a layer of polyethylene film,

or

-of a width not exceeding 15 mm, consisting of a layer of biaxially-orientated polyamide film and two layers of polyethylene film

0

ex 3920 10 19 ex 3920 10 90 ex 3920 99 50Film, of a thickness not exceeding 1 mm, of a copolymer of vinyl alcohol with ethylene, containing no other polymerization products or copolymerization products, with an extension at break (longitudinal or transversal) of 65% or more0

ex 3920 10 90Synthetic paper pulp, in the form of moist sheets, made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15%, containing polyvinyl alcohol dissolved in water as the moistening agent0

ex 3920 10 90Synthetic paper pulp, in the form of moist sheets, made from unconnected finely branched fibrils of a mixture of polyethylene and a polyethylene copolymer, whether or not blended with cellulose fibres in a quantity not exceeding 15%, containing polyvinyl alcohol dissolved in water as the moistening agent0

ex 3920 10 90Copolymer of ethylene with propylene, in the form of strip of a width of 18 mm or more but not exceeding 27 mm, or of 58 cm or more but not exceeding 90 cm, and of a thickness not exceeding

1 mm, which, after being extended at 23C to twice the original length, returns to its original

length, with a tolerance of not more than + 15%, within a period of two minutes0

ex 3920 20 90Synthetic paper pulp, in the form of moist sheets, made from unconnected finely branched polypropylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15%, containing polyvinyl alcohol dissolved in water as the moistening agent0

ex 3920 20 90Synthetic paper pulp, in the form of moist sheets, made from unconnected finely branched fibrils of polypropylene modified by an organic acid, whether or not blended with cellulose fibres in a quantity not exceeding 15%, containing polyvinyl alcohol dissolved in water as the moistening agent0

ex 3920 42 91Sheeting of polyvinyl chloride, stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 micrometres or more but not exceeding 80 micrometres, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of polyvinyl chloride0

ex 3920 59 00Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding

150 micrometres0

ex 3920 62 00Polyethylene terephthalate film, of a thickness of less than 10 micrometres, for the manufacture of video cassettes with a playing time of 300 minutes at a tape speed of 24 mm per second (a)0

ex 3920 62 00Polyethylene terephthalate film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for use in the manufacture of photopolymer printing plates (a)0

ex 3920 62 00Polyethylene terephthalate film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks (floppy disks) (a)0

ex 3920 62 00 ex 3920 63 00 ex 3921 90 19Polyester film of a thickness not exceeding 70 micrometres, coated on one side with a substance which becomes coloured in the presence of salicyclic acid at a temperature not exceeding 100 C0

ex 3920 62 00 ex 3920 63 00 ex 3921 90 19Polyester film of a thickness not exceeding 10 micrometres, coated on one side with salicyclic acid0

ex 3920 69 00 ex 3921 90 19Iridescent film of polyester and polymethyl methacrylate0

ex 3920 69 00Polycondensation products of terephthalic acid with a mixture of cyclohex-1,4-ylenedimethanol and ethane-1,2-diol, in the form of a film0

ex 3920 91 00Polyvinyl butyral film having a graduated coloured band6

ex 3920 92 00Film consisting of poly(epsilon-caprolactam) blended with either not more than 10% by weight of polyethylene or not more than 10% weight of a copolymer of ethylene with vinyl acetate0

ex 3920 92 00Poly(epsilon-caprolactam) film, of a softening point of 200 °C or more and containing 130 mg/kg or more but not more than 170 mg/kg of copper, for use during the bonding together, under heat and vacuum, of components of composite articles (a)0

ex 3920 99 19 ex 3921 90 50Polyimide sheet and strip, uncoated, or coated or covered solely with plastic0

ex 3920 99 50Poly(1-chlorotrifluoroethylene) film0

ex 3920 99 50Polyvinyl fluoride sheet0

ex 3920 99 50Film and sheet of a copolymer of ethylene with chlorotrifluoroethylene, of a thickness of 12 micrometres or more but not exceeding 400 micrometres0

ex 3920 99 50Film of a thickness not exceeding 1 mm, entirely of polyvinyl alcohol, containing by weight not more than 2% of unhydrolysed acetate groups expressed as vinyl acetate, and 5% or more but not more than 25% of glycerol as a plasticizer, insoluble in water at a temperature of less than 65C0

ex 3920 99 50Polyvinyl alcohol film, coated on both sides, of a total thickness of less than 1 mm and with an extension at break (longitudinal or transversal) of 65% or more0

ex 3920 99 50Biaxially-orientated polyvinyl alcohol film, containing by weight 97% or more of polyvinyl alcohol, uncoated, of a thickness not exceeding 1 mm0

ex 3920 99 50 ex 3921 90 60Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic

cells (a)0

ex 3920 99 50 ex 3921 90 60Sheet of a thickness of 1 mm or more but not exceeding 3 mm, consisting of a copolymer of ethylene with chlorotrifluoroethylene, whether or not backed with a woven glass-fibre fabric0

ex 3926 90 91Reflecting sheeting or tape, consisting of a facing strip of polyvinyl chloride embossed in a regular pyramidal pattern, heat sealed in parallel lines or a grid pattern to a backing strip of plastic material, or of knitted or woven fabric covered on one side with plastic material0

ex 4104 10 91 ex 4104 21 00Leather of East India kip, whole, whether or not the heads and legs have been removed, each of a net weight exceeding 4.5 kg but not exceeding 8 kg, not further prepared than vegetable-tanned, whether or not having undergone certain treatments, but obviously unsuitable for immediate use for the manufacture of leather articles0

ex 4105 11 91

ex 4105 11 99

ex 4105 12 10

ex 4105 12 90

ex 4105 19 10

ex 4105 19 90Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 4108 or 41090

ex 4106 11 90

ex 4106 12 00

ex 4106 19 00Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 4108 or 41090

ex 4107 10 10

ex 4107 29 10

ex 4107 90 10Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading No 4108 or 41090

ex 4416 00 90Used casks and barrels of oak, whether assembled or not; their staves and heads0

ex 4501 10 00Natural cork, raw or simply prepared0

ex 4501 90 00Waste cork; crushed, granulated or ground cork0

ex 4823 90 90Strips of paper glued to one another to form a honeycomb of a height not exceeding 13 cm, for agricultural purposes (a)0

ex 5002 00 00Raw silk (not thrown)0

ex 5004 00 10

ex 5004 00 90Yarn spun entirely from silk, not put up for retail sale2,5

ex 5005 00 10

ex 5005 00 90Yarn spun entirely from silk waste (noil), not put up for retail sale0

ex 5306 10 11

ex 5306 10 31Unbleached flax yarn (other than tow yarn) measuring 333,3 decitex or more (not exceeding

30 metric number), for the manufacture of multiple or cabled yarn of the footwear industry or

for whipping cables (a)1,8

ex 5402 39 10Texturized yarn of polypropylene, impregnated with silicone-based water-repellant0

ex 5402 41 10Polyamide yarn, not textured, untwisted or with a twist not exceeding 22 turns per metre, of crimpable bicomponent filaments consisting of poly(hexamethylene adipamide) with a copolyamide, for the manufacture of knee-length stockings of subheadings 6115 20 11 and 6115 93 30, women's stockings of subheadings 6115 20 19 and 6115 93 91, or panty hose (tights) of subheading

6115 11 00 (a)0

ex 5402 41 30 ex 5402 41 90Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation ofm-phenylenediamine and isophthalic acid0

ex 5402 49 99Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (a)0

ex 5402 49 99 ex 5402 59 90 ex 5402 69 90Non-textured filament yarn of polyvinyl alcohol, for the manufacture of sleeves for printing

rollers (a)0

ex 5402 49 99 ex 5402 69 90Yarn of polytetrafluoroethylene0

ex 5402 49 99 ex 5402 69 90Yarn wholly of polyglycollic acid0

ex 5404 10 90Monofilament of poly(1,4-dioxanone)0

ex 5404 10 90Monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures (a)0

ex 5404 10 90Monofilament of polytetrafluoroethylene0

ex 5404 90 90Strip of polytetrafluoroethylene, with an extension at break not exceeding 25%0

ex 5407 71 00Woven fabrics of polyvinyl alcohol fibres, for machine embroidery0

ex 5407 71 00 ex 5903 90 99Woven polytetrafluoroethylene fibre fabric, coated or covered on one side with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side chains ending in carboxylic acid or sulphonic acid groups in the potassium or sodium salt form, whether or not coated on the same side with a metallic inorganic compound0

ex 5503 10 19Textile fibres exclusively of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid, for uses other than the manufacture of goods of Chapters 60 to 65 or of materials used in the manufacture of such goods (a)0

ex 5503 10 19Textile fibres containing by weight 85% or more of fibres of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid, and 1% or more but not more than 15% of fibres of poly(p-phenylene terephthalamide)5

ex 5503 90 10 ex 5503 90 90Acetalized, multicomponent spun fibres with a matrix fibril structure, consisting of emulsion-polymerized polyvinyl alcohol and polyvinyl chloride0

ex 5503 90 90Textile fibres of polytetrafluoroethylene0

ex 5503 90 90Fibres wholly of poly(thio-1,4-phenylene)0

ex 5503 90 90 ex 5601 30 00Polyvinyl alcohol fibres, whether or not acetalized0

ex 5504 10 00Fibres entirely of modal (ISO)0

ex 5603 00 10 ex 5603 00 91 ex 5603 00 93Polyvinyl alcohol nonwovens, of a thickness of 200 micrometres or more but not exceeding 280 micrometres and of a weight of 20 g/m2 (a) or more but not exceeding 50 g/m2, in the piece or cut into rectangles0

ex 5603 00 10 ex 5603 00 93 ex 5603 00 95 ex 5603 00 99Nonwovens of aromatic polyamide fibres obtained by polycondensation ofm-phenylenediamine and isophthalic acid, in the piece or cut into rectangles0

ex 5903 10 90 ex 5903 20 90 ex 5903 90 99Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres0

ex 5907 00 00Textile fabrics, coated with adhesive in which are embedded spheres of a diameter not exceeding

75 micrometres, of a weight not exceeding 550 g/m20

ex 5911 90 90Yarn and strip of impregnated polytetrafluoroethylene, whether or not oiled or graphited0

ex 6815 99 90Microspheres, containing by weight more than 90% of barium and titanium expressed as barium oxide and titanium dioxide, of a diameter of less than 100 micrometres and a refractive index of

2,1 or more but not exceeding 2,40

ex 6909 19 00Plate, of dialuminium trioxide and titanium carbide, of dimensions not exceeding 48×48 mm, or of a diameter not exceeding 125 mm, for the manufacture of magnetic heads (a)0

ex 7011 20 00Glass envelopes for monochrome cathode-ray tubes:

-of a diagonal screen measurement of 3,8 cm or more but not exceeding 51 cm,

and

-of a nominal neck-diameter of 13 mm, 20 mm, 29 mm or 37 mm

0

ex 7011 20 00Face-plates, wholly of glass, of a diagonal dimension not exceeding 61 cm, and with a raised edge, for the manufacture of monochrome cathode-ray tubes (a)0

ex 7011 20 00Glass cones, with a shaped edge, of a diagonal dimension not exceeding 61 cm, for the manufacture of monochrome cathode-ray tubes (a)0

ex 7019 10 59Yarns of 33 tex ±7,5%, or a multiple thereof, obtained from continuous spun glass filaments of a diameter of 2,5 micrometres or more but not exceeding 5,1 micrometres, other than those treated so as to improve their adhesion to elastomers0

ex 7019 10 59Yarn of 22 tex, spun from continuous glass filaments of a diameter of 4,7 micrometres or more but not exceeding 5,5 micrometres0

ex 7019 10 59Yarn of 33, 34 or 51 ±7,5%, or a multiple thereof, spun from continuous glass filaments of a diameter of 5,8 micrometres or more but not exceeding 7,1 micrometres0

ex 7019 32 00 ex 7019 39 00Non-woven products of non-textile glass fibre, of a weight not exceeding 120 g/m2 and a fibre diameter, excluding any coating, not exceeding 7 micrometres, for the manufacture of filtration products (a)0

ex 7019 90 10Non-textile glass fibres in which fibres of a diameter of less than 3,5 micrometres predominate0

ex 7410 21 00Sheets and plates of polytetrafluoroethylene, with aluminium oxide or titanium dioxide as a filler or reinforced with glass-fibre fabric, laminated on both sides with copper foil0

ex 7602 00 19Waste of aluminium, other (including factory rejects)0

ex 8103 90 10Wire of unalloyed tantalum, of a diameter of 0,2 mm or more but not exceeding 0,5 mm, for the manufacture of capacitors (a)0

ex 8104 90 10Ground and polished magnesium sheets, of dimensions not exceeding 1 500×2 000 mm, coated on one side with an epoxy resin insensitive to light0

ex 8108 10 10Titanium sponge0

ex 8108 10 90Waste and scrap titanium0

ex 8111 00 11Electrolytic manganese of a purity by weight of 99,7% or more, for the chemical industry (a)0

ex 8419 89 90Immersion tube (coils) bundles, consisting of an assembly of plastic tubes terminating at each end in a honeycomb structure (end-fitting) surrounded by a pipe connector0

ex 8421 99 00Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of

an overall length of 300 mm or more but not exceeding 3 700 mm and a diameter not exceeding

500 mm0

ex 8421 99 00Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder0

ex 8421 99 00 ex 5911 90 90Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness not exceeding 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0

ex 8439 99 10 ex 8439 99 90Suction roll shells, not drilled, in the form of alloy steel tubes, of a length of 5 207 mm or more and an external diameter of 754 mm or more, for use in machinery for making paper or paper-

board (a)0

aControl of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.