This document is an excerpt from the EUR-Lex website
Document 32024L2853
Directive (EU) 2024/2853 of the European Parliament and of the Council of 23 October 2024 on liability for defective products and repealing Council Directive 85/374/EEC (Text with EEA relevance)
Directive (EU) 2024/2853 of the European Parliament and of the Council of 23 October 2024 on liability for defective products and repealing Council Directive 85/374/EEC (Text with EEA relevance)
Directive (EU) 2024/2853 of the European Parliament and of the Council of 23 October 2024 on liability for defective products and repealing Council Directive 85/374/EEC (Text with EEA relevance)
PE/7/2024/REV/1
OJ L, 2024/2853, 18.11.2024, ELI: http://data.europa.eu/eli/dir/2024/2853/oj (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
In force
Official Journal |
EN L series |
2024/2853 |
18.11.2024 |
DIRECTIVE (EU) 2024/2853 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 23 October 2024
on liability for defective products and repealing Council Directive 85/374/EEC
(Text with EEA relevance)
THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 114 thereof,
Having regard to the proposal from the European Commission,
After transmission of the draft legislative act to the national parliaments,
Having regard to the opinion of the European Economic and Social Committee (1),
Acting in accordance with the ordinary legislative procedure (2),
Whereas:
(1) |
In order to improve the proper functioning of the internal market, it is necessary to ensure that competition is not distorted and that the movement of goods is not obstructed. Council Directive 85/374/EEC (3) lays down common rules on liability for defective products with the aim of removing divergences between the legal systems of Member States that may distort competition and affect the movement of goods within the internal market. Greater harmonisation of the common rules on liability for defective products laid down in that Directive would further contribute to the achievement of those objectives, while entailing an increased degree of protection of consumers’ and other natural persons’ health or property. |
(2) |
Liability without fault on the part of economic operators remains the sole means of adequately addressing the problem of fair apportionment of risk inherent in modern technological production. |
(3) |
Directive 85/374/EEC has been an effective and important instrument, but it would need to be revised in light of developments related to new technologies, including artificial intelligence (AI), new circular economy business models and new global supply chains, which have led to inconsistencies and legal uncertainty, in particular as regards the meaning of the term ‘product’. Experience gained from applying that Directive has also shown that injured persons face difficulties obtaining compensation due to restrictions on making compensation claims and due to challenges in gathering evidence to prove liability, especially in light of increasing technical and scientific complexity. That includes compensation claims in respect of damage related to new technologies. The revision of that Directive would therefore encourage the roll-out and uptake of such new technologies, including AI, while ensuring that claimants enjoy the same level of protection irrespective of the technology involved and that all businesses benefit from more legal certainty and a level playing field. |
(4) |
A revision of Directive 85/374/EEC would be needed in order to ensure coherence and consistency with product safety and market surveillance legislation at Union and national level. In addition, there is a need to clarify basic notions and concepts to ensure coherence and legal certainty and a level playing field in the internal market, and to reflect the recent case law of the Court of Justice of the European Union. |
(5) |
Considering the extensive nature of the amendments that would be required in order for Directive 85/374/EEC to remain effective and in order to ensure clarity and legal certainty, that Directive should be repealed and replaced with this Directive. |
(6) |
In order to ensure that the Union’s product liability regime is comprehensive, no-fault liability for defective products should apply to all movables, including software, including when they are integrated into other movables or installed in immovables. |
(7) |
Liability for defective products should not apply to damage arising from nuclear accidents, in so far as liability for such damage is covered by international conventions ratified by Member States. |
(8) |
In order to create a genuine internal market with a high and uniform level of protection of consumers and other natural persons, and to reflect the case law of the Court of Justice of the European Union, Member States should not, in respect of matters within the scope of this Directive, maintain or introduce provisions that are more stringent or less stringent than those laid down in this Directive. |
(9) |
Under the national law of Member States, an injured person could have a claim for damages on the basis of contractual liability or on grounds of non-contractual liability that does not involve the manufacturer’s liability for the defectiveness of a product as established in this Directive. This concerns for example liability based on a warranty or on fault or strict liability of operators for damage caused by the properties of an organism resulting from genetic engineering. Such national law provisions, which serve to attain, inter alia, the objective of effective protection of consumers and other natural persons, should remain unaffected by this Directive. |
(10) |
In certain Member States, injured persons are entitled to make claims for damage caused by pharmaceutical products under a special national liability system, with the result that effective protection of natural persons in the pharmaceutical sector is already achieved. The right to make such claims should remain unaffected by this Directive. Furthermore, amendments to such special liability systems should not be precluded as long as they do not undermine the effectiveness of the system of liability provided for in this Directive or its objectives. |
(11) |
Compensation schemes outside the context of liability regimes, such as national health systems, social security schemes or insurance schemes, fall outside the scope of this Directive and should therefore not be precluded. For example, some Member States have schemes in place to provide compensation in respect of pharmaceutical products that cause harm without being defective. |
(12) |
Decision No 768/2008/EC of the European Parliament and of the Council (4) lays down common principles and reference provisions intended to apply in all sectoral product legislation. In order to ensure consistency with that Decision, certain provisions of this Directive, in particular the definitions, should be aligned therewith. |
(13) |
Products in the digital age can be tangible or intangible. Software, such as operating systems, firmware, computer programs, applications or AI systems, is increasingly common on the market and plays an increasingly important role for product safety. Software is capable of being placed on the market as a standalone product or can subsequently be integrated into other products as a component, and it is capable of causing damage through its execution. In the interest of legal certainty, it should be clarified in this Directive that software is a product for the purposes of applying no-fault liability, irrespective of the mode of its supply or usage, and therefore irrespective of whether the software is stored on a device, accessed through a communication network or cloud technologies, or supplied through a software-as-a-service model. Information is not, however, to be considered a product, and product liability rules should therefore not apply to the content of digital files, such as media files or e-books or the mere source code of software. A developer or producer of software, including AI system providers within the meaning of Regulation (EU) 2024/1689 of the European Parliament and of the Council (5), should be treated as a manufacturer. |
(14) |
Free and open-source software, whereby the source code is openly shared and users can freely access, use, modify and redistribute the software or modified versions thereof, can contribute to research and innovation on the market. Such software is subject to licences that allow anyone the freedom to run, copy, distribute, study, change and improve the software. In order not to hamper innovation or research, this Directive should not apply to free and open-source software developed or supplied outside the course of a commercial activity, since products so developed or supplied are by definition not placed on the market. Developing or contributing to such software should not be understood as making it available on the market. Providing such software on open repositories should not be considered as making it available on the market, unless that occurs in the course of a commercial activity. In principle, the supply of free and open-source software by non-profit organisations should not be considered as taking place in a business-related context, unless such supply occurs in the course of a commercial activity. However, where software is supplied in exchange for a price, or for personal data used other than exclusively for improving the security, compatibility or interoperability of the software, and is therefore supplied in the course of a commercial activity, this Directive should apply. |
(15) |
Where free and open-source software supplied outside the course of a commercial activity is subsequently integrated by a manufacturer as a component into a product in the course of a commercial activity and is thereby placed on the market, it should be possible to hold that manufacturer liable for damage caused by the defectiveness of such software but not the manufacturer of the software because the manufacturer of the software would not have fulfilled the conditions of placing a product or component on the market. |
(16) |
Whereas digital files as such are not products within the scope of this Directive, digital manufacturing files, which contain the functional information necessary to produce a tangible item by enabling the automated control of machinery or tools, such as drills, lathes, mills and 3D printers, should be considered to be products in order to ensure the protection of natural persons in cases where such files are defective. For example, a defective computer-assisted-design file used to create a 3D-printed good that causes harm should give rise to liability under this Directive, where such a file is developed or supplied in the course of a commercial activity. For the avoidance of doubt, it should be clarified that raw materials, such as gas and water, and electricity are products. |
(17) |
It is becoming increasingly common for digital services to be integrated into, or inter-connected with, a product in such a way that the absence of the service would prevent the product from performing one of its functions. While this Directive should not apply to services as such, it is necessary to extend no-fault liability to such integrated or inter-connected digital services as they determine the safety of the product just as much as physical or digital components. Those related services should be considered components of the product into which they are integrated or with which they are inter-connected where they are within the control of the manufacturer of that product. Examples of related services include the continuous supply of traffic data in a navigation system, a health monitoring service that relies on a physical product’s sensors to track the user’s physical activity or health metrics, a temperature control service that monitors and regulates the temperature of a smart fridge, or a voice-assistant service that allows one or more products to be controlled by using voice commands. Internet access services should not be treated as related services, since they cannot be considered as part of a product within a manufacturer’s control and it would be unreasonable to make manufacturers liable for damage caused by shortcomings in internet access services. Nevertheless, a product that relies on internet access services and fails to maintain safety in the event of a loss of connectivity could be found to be defective under this Directive. |
(18) |
Related services and other components, including software updates and upgrades, should be considered to be within the manufacturer’s control where they are integrated into, or inter-connected with, a product, or supplied, by the manufacturer or where the manufacturer authorises or consents to their integration, inter-connection or supply by a third party, for example where the manufacturer of a smart home appliance consents to the provision by a third party of software updates for the manufacturer’s appliance or where a manufacturer presents a related service or component as part of the product even though it is supplied by a third party. A manufacturer should not be considered to have consented to integration or inter-connection merely by providing for the technical possibility of integration or inter-connection or by recommending certain brands or by not prohibiting potential related services or components. |
(19) |
Once a product has been placed on the market, it should be considered to remain within the manufacturer’s control where the manufacturer retains the ability to supply software updates or upgrades itself or via a third party. |
(20) |
In recognition of the growing relevance and value of intangible assets, the destruction or corruption of data, such as digital files deleted from a hard drive, should also be compensated for, including the cost of recovering or restoring those data. The protection of natural persons necessitates compensation being available for material losses resulting not only from death or personal injury, such as funeral or medical expenses or lost income, and from damage to property, but also for destruction or corruption of data. Destruction or corruption of data does not automatically result in a material loss if the victim is able to retrieve the data at no cost, such as where a back-up of the data exists or the data can be downloaded again, or an economic operator restores or recreates temporarily unavailable data, for example in a virtual environment. Destruction or corruption of data is distinct from data leaks or breaches of data protection rules, and, consequently, compensation for infringements of Regulation (EU) 2016/679 (6) or (EU) 2018/1725 (7) of the European Parliament and of the Council or Directive 2002/58/EC (8) or (EU) 2016/680 (9) of the European Parliament and of the Council is not affected by this Directive. |
(21) |
In the interest of legal certainty, this Directive should clarify that personal injury includes medically recognised and medically certified damage to psychological health that affects the victim’s general state of health and could require therapy or medical treatment, taking into account, inter alia, the International Classification of Diseases of the World Health Organization. |
(22) |
In line with this Directive’s objective of making compensation available only to natural persons, damage to property used exclusively for professional purposes should not be compensated under this Directive. In order to address a potential risk of litigation in an excessive number of cases, the destruction or corruption of data that are used for professional purposes, even if not exclusively so, should not be compensated for under this Directive. |
(23) |
While Member States should provide for full and proper compensation for all material losses resulting from death or personal injury, or from damage to or destruction of property, and destruction or corruption of data, the rules on calculating compensation should be laid down by Member States. Furthermore, compensation for non-material losses resulting from damage covered by this Directive, such as pain and suffering, should be provided in so far as such losses can be compensated for under national law. |
(24) |
Types of damage other than those provided for in this Directive, such as pure economic loss, privacy infringements or discrimination, should not by themselves trigger liability under this Directive. However, this Directive should not affect the right to compensation for any damage, including non-material, under other liability regimes. |
(25) |
In order to protect natural persons, damage to any property owned by a natural person should be compensated for. Since property is increasingly used for both private and professional purposes, it is appropriate to provide for compensation for damage to such mixed-use property. In light of this Directive’s objective of protecting natural persons, property used exclusively for professional purposes should be excluded from its scope. |
(26) |
This Directive should apply to products placed on the market or, where relevant, put into service in the course of a commercial activity, whether in return for payment or free of charge, for example products supplied in the context of a sponsoring campaign or products manufactured for the provision of a service financed by public funds, since that mode of supply nonetheless has an economic or business character. The concept of ‘putting into service’ is relevant for products that are not placed on the market prior to their first use, as can be the case for lifts, machinery or medical devices. |
(27) |
In so far as national law so provides, the right to compensation for injured persons should apply both to direct victims, who suffer damage directly caused by a defective product, and to indirect victims, who suffer damage as a result of the direct victim’s damage. |
(28) |
Taking into account the increased complexity of products, of business models and of supply chains, and considering that the aim of this Directive is to ensure that consumers and other natural persons can easily exercise their right to obtain compensation in the event of damage caused by defective products, it is important that Member States ensure that competent consumer protection authorities or bodies provide all relevant information to affected consumers to enable them to effectively exercise their right to compensation in accordance with this Directive. In doing so, it is appropriate that Member States have regard to existing obligations concerning cooperation between national authorities responsible for enforcing consumer protection law, in particular the obligations under Regulation (EU) 2017/2394 of the European Parliament and of the Council (10). It is important that national consumer protection authorities or bodies regularly exchange any relevant information that they become aware of and closely cooperate with market surveillance authorities. Member States can also encourage the competent consumer protection authorities or bodies to provide information to consumers to enable them better to exercise their right to compensation in accordance with this Directive effectively. |
(29) |
This Directive does not affect the various means of seeking redress at national level, whether through court proceedings, non-court solutions, alternative dispute resolution or representative actions under Directive (EU) 2020/1828 of the European Parliament and of the Council (11) or under national collective redress schemes. |
(30) |
In order to protect the health and property of natural persons, the defectiveness of a product should be determined by reference not to its fitness for use but to the lack of the safety that a person is entitled to expect or that is required under Union or national law. The assessment of defectiveness should involve an objective analysis of the safety that the public at large is entitled to expect and not refer to the safety that any particular person is entitled to expect. The safety that the public at large is entitled to expect should be assessed by taking into account, inter alia, the intended purpose, reasonably foreseeable use, presentation, objective characteristics and properties of the product in question, including its expected lifespan, as well as the specific requirements of the group of users for whom the product is intended. Some products, such as life-sustaining medical devices, entail an especially high risk of causing damage to people and therefore give rise to particularly high safety expectations. In order to take such expectations into account, it should be possible for a court to find that a product is defective without establishing its actual defectiveness, where it belongs to the same production series as a product already proven to be defective. |
(31) |
The assessment of defectiveness should take into account the presentation of the product. However, warnings or other information provided with a product cannot be considered sufficient to make an otherwise defective product safe, since defectiveness should be determined by reference to the safety that the public at large is entitled to expect. Therefore, liability under this Directive cannot be avoided simply by listing all conceivable side effects of a product. When determining the defectiveness of a product, reasonably foreseeable use also encompasses misuse that is not unreasonable under the circumstances, such as the foreseeable behaviour of a user of machinery resulting from a lack of concentration or the foreseeable behaviour of certain user groups such as children. |
(32) |
In order to reflect the increasing prevalence of inter-connected products, the assessment of a product’s safety should take into account the reasonably foreseeable effects of other products on the product in question, for example within a smart home system. The effect on a product’s safety of any ability to learn or acquire new features after it is placed on the market or put into service should also be taken into account to reflect the legitimate expectation that a product’s software and underlying algorithms are designed in such a way as to prevent hazardous product behaviour. Consequently, a manufacturer that designs a product with the ability to develop unexpected behaviour should remain liable for behaviour that causes harm. In order to reflect the fact that in the digital age many products remain within the manufacturer’s control after being placed on the market, the moment in time a product leaves the manufacturer’s control should also be taken into account in the assessment of a product’s safety. A product can also be found to be defective on account of its cybersecurity vulnerability, for example where the product does not fulfil safety-relevant cybersecurity requirements. |
(33) |
In order to reflect the nature of products whose very purpose is to prevent damage, such as a warning mechanism like a smoke alarm, the assessment of the defectiveness of such a product should take into account its failure to fulfil that purpose. |
(34) |
In order to reflect the relevance of product safety and market surveillance legislation for determining the level of safety that a person is entitled to expect, it should be clarified that relevant product safety requirements, including safety-relevant cybersecurity requirements, and interventions by competent authorities, such as issuing product recalls, or by economic operators themselves, should be taken into account in the assessment of defectiveness. Such interventions should, however, not in themselves create a presumption of defectiveness. |
(35) |
In the interests of consumer choice and in order to encourage innovation, research and easy access to new technologies, the existence or subsequent placing on the market of a better product should not in itself lead to the conclusion that a product is defective. Similarly, the supply of updates or upgrades for a product should not in itself lead to the conclusion that a previous version of the product is defective. |
(36) |
The protection of natural persons requires that any manufacturer involved in the production process can be held liable, in so far as a product or a component supplied by that manufacturer is defective. This includes any person who presents themselves as the manufacturer by putting, or authorising a third party to put, their name, trademark or other distinguishing feature on a product, since by doing so that person gives the impression of being involved in the production process or of assuming responsibility for it. Where a manufacturer integrates a defective component from another manufacturer into a product, an injured person should be able to seek compensation for the same damage both from the manufacturer of the product and from the manufacturer of the component. Where a component is integrated into a product outside the control of the manufacturer of that product, an injured person should be able to seek compensation from the component manufacturer where the component itself is a product under this Directive. |
(37) |
In order to ensure that injured persons have an enforceable claim for compensation where a manufacturer of a product is established outside the Union, it should be possible to hold the importer of that product and the authorised representative of the manufacturer, appointed in relation to specified tasks under Union legislation, for example under product safety and market surveillance legislation, liable. Market surveillance has shown that supply chains sometimes involve economic operators whose novel form means that they do not fit easily into traditional supply chains under the existing legal framework. Such is the case, in particular, with fulfilment service providers, which perform many of the same functions as importers but which might not always correspond to the traditional definition of importer in Union law. Fulfilment service providers play an increasingly significant role as economic operators, enabling and facilitating access to the Union market for products from third countries. That shift in relevance is already reflected in the product safety and market surveillance framework, in particular Regulations (EU) 2019/1020 (12) and (EU) 2023/988 (13) of the European Parliament and of the Council. Therefore, it should be possible to hold fulfilment service providers liable, but given the subsidiary nature of their role, they should be liable only where no importer or authorised representative is established in the Union. In the interests of channelling liability in an effective manner towards manufacturers, importers, authorised representatives and fulfilment service providers, it should be possible to hold distributors liable only where they fail to promptly identify a relevant economic operator established in the Union. |
(38) |
Online selling has grown consistently and steadily, creating new business models and new actors in the market, such as online platforms. Regulation (EU) 2022/2065 of the European Parliament and of the Council (14) and Regulation (EU) 2023/988 regulate, inter alia, the responsibility and accountability of online platforms with regard to illegal content, including in relation to the sale of products. When online platforms perform the role of manufacturer, importer, authorised representative, fulfilment service provider or distributor in respect of a defective product, they should be subject to the same liability as such economic operators. Where online platforms play a mere intermediary role in the sale of products between traders and consumers, they are covered by a conditional liability exemption under Regulation (EU) 2022/2065. However, Regulation (EU) 2022/2065 provides that online platforms that allow consumers to conclude distance contracts with traders are not exempt from liability under consumer protection law where they present the product or otherwise enable the specific transaction in question in a way that would lead an average consumer to believe that the product is provided either by the online platform itself or by a trader acting under its authority or control. In keeping with that principle, where online platforms so present the product or otherwise enable the specific transaction, it should be possible to hold them liable in the same way as distributors under this Directive. Therefore, provisions of this Directive relating to distributors should apply analogously to such online platforms. That means that such online platforms should be liable only where they present the product or otherwise enable the specific transaction in a way that would lead an average consumer to believe that the product is provided either by the online platform itself or by a trader acting under its authority or control, and only where the online platform fails to promptly identify a relevant economic operator established in the Union. |
(39) |
In the transition from a linear to a circular economy, products are designed to be more durable, reusable, repairable and upgradable. The Union is also promoting innovative and sustainable forms of production and consumption that prolong the functionality of products and components, such as remanufacturing, refurbishment and repair, as set out in the communication of the Commission of 11 March 2020 entitled ‘A new Circular Economy Action Plan – For a cleaner and more competitive Europe’. When a product is substantially modified and is thereafter made available on the market or put into service, it is considered to be a new product. Where the modification is made outside the control of the original manufacturer, it should be possible to hold the person that made the substantial modification liable as a manufacturer of the modified product, since under relevant Union law that person is responsible for the product’s compliance with safety requirements. Whether a modification is substantial should be determined on the basis of criteria laid down in relevant Union and national product safety law, including Regulation (EU) 2023/988. Where no such criteria are laid down in respect of the product in question, modifications that change the original intended functions of the product or affect its compliance with applicable safety requirements or change its risk profile should be considered to be substantial modifications. Where a substantial modification is carried out by the original manufacturer, or within its control, and where such a substantial modification makes the product defective, that manufacturer should not be able to avoid liability by arguing that the defectiveness came into being after it placed the product on the market or put it into service. In the interests of a fair apportionment of risk in the circular economy, an economic operator that makes a substantial modification, other than the original manufacturer, should be exempted from liability if that economic operator can prove that the damage is related to a part of the product not affected by the modification. Economic operators that carry out repairs or other operations that do not involve substantial modifications should not be subject to liability under this Directive. |
(40) |
Since products can be designed in a manner that allows modifications to be made through changes to software, including upgrades, the same principles should apply to modifications made by way of a software update or upgrade as apply to modifications made in other ways. Where a substantial modification is made through a software update or upgrade, or due to the continuous learning of an AI system, the substantially modified product should be considered to be made available on the market or put into service at the time that modification is actually made. |
(41) |
Where victims fail to obtain compensation because no person is held liable under this Directive or because the liable persons are insolvent or have ceased to exist, Member States can use existing national sectoral compensation schemes or establish new ones under national law to appropriately compensate injured persons who suffered damage caused by defective products. It is for Member States to decide whether such compensation schemes are funded in whole or in part from public or private revenue. |
(42) |
In light of the imposition on economic operators of liability irrespective of fault, and with a view to achieving a fair apportionment of risk, a person that claims compensation for damage caused by a defective product should bear the burden of proving the damage, the defectiveness of a product and the causal link between the two, in accordance with the standard of proof applicable under national law. Persons claiming compensation for damage are, however, often at a significant disadvantage compared to manufacturers in terms of access to, and understanding of, information on how a product was produced and how it operates. That asymmetry of information can undermine the fair apportionment of risk, in particular in cases involving technical or scientific complexity. It is therefore necessary to facilitate claimants’ access to evidence to be used in legal proceedings. Such evidence includes documents that have to be created ex novo by the defendant by compiling or classifying the available evidence. In assessing the request for disclosure of evidence, national courts should ensure that such access is limited to that which is necessary and proportionate, inter alia, to avoid non-specific searches for information that is not relevant to the proceedings and to protect confidential information, such as information falling within the scope of legal professional privilege and trade secrets in accordance with Union and national law, in particular Directive (EU) 2016/943 of the European Parliament and of the Council (15). Taking into consideration the complexity of certain types of evidence, for example evidence relating to digital products, it should be possible for national courts to require such evidence to be presented in an easily accessible and easily understandable manner, subject to certain conditions. |
(43) |
This Directive harmonises rules on disclosure of evidence only in so far as such matters are regulated by it. Matters not regulated by this Directive include rules on disclosure of evidence with regard to: pre-trial procedures; how specific a request for evidence must be; third parties; cases of declaratory actions; and sanctions for non-compliance with the obligation to disclose evidence. |
(44) |
In light of the fact that defendants might need access to evidence at the disposal of the claimant in order to counter a claim for compensation under this Directive, defendants should also have the possibility of accessing evidence. Similar to a disclosure request made by the claimant, when assessing the request of the defendant for disclosure of evidence, national courts should ensure that such access is limited to that which is necessary and proportionate, inter alia, to avoid non-specific searches for information that is not relevant to the proceedings and to protect confidential information. |
(45) |
In respect of trade secrets as defined in Directive (EU) 2016/943, national courts should be empowered to take specific measures to ensure the confidentiality of trade secrets during and after the proceedings, while achieving a fair and proportionate balance between the interests of the trade secret holder with regard to secrecy and the interests of the injured person. Such measures should include at least measures to restrict access to documents containing trade secrets or alleged trade secrets and to restrict access to hearings to a limited number of people, or allowing access only to redacted documents or transcripts of hearings. When deciding on such measures, it is appropriate that national courts take into account the need to ensure the right to an effective remedy and to a fair trial, the legitimate interests of the parties and, where appropriate, of third parties, and potential harm for either of the parties to a dispute, and, where appropriate, for third parties, which results from the granting or rejection of such measures. |
(46) |
It is necessary to alleviate the claimant’s burden of proof provided that certain conditions are fulfilled. Rebuttable presumptions of fact are a common mechanism for alleviating a claimant’s evidential difficulties and allowing a court to base the existence of defectiveness or of a causal link on the presence of another fact that has been proven while preserving the rights of the defendant. In order to provide an incentive to comply with the obligation to disclose information, national courts should presume the defectiveness of a product where a defendant fails to comply with such an obligation. Many mandatory safety requirements have been adopted in order to protect consumers and other natural persons from the risk of harm, including under Regulation (EU) 2023/988. In order to reinforce the close relationship between product safety rules and liability rules, non-compliance with such requirements should also result in a presumption of defectiveness. That includes cases in which a product is not equipped with the means to log information about the operation of the product as required under Union or national law. The same should apply in the case of obvious malfunction, such as a glass bottle that explodes in the course of reasonably foreseeable use, since it is unnecessarily burdensome to require a claimant to prove defectiveness when the circumstances are such that its existence is undisputed. Reasonably foreseeable use covers the use for which a product is intended in accordance with the information provided by the manufacturer or economic operator placing it on the market, the ordinary use as determined by the design and construction of the product, and use which can be reasonably foreseen where such use could result from lawful and readily predictable human behaviour. |
(47) |
Where it has been established that a product is defective and the kind of damage that occurred is, based primarily on similar cases, typically caused by the defectiveness in question, the claimant should not be required to prove the causal link and its existence should be presumed. |
(48) |
National courts should presume the defectiveness of a product or the causal link between the damage and the defectiveness, or both, where, notwithstanding the defendant’s disclosure of information, it would be excessively difficult for the claimant, in particular due to the technical or scientific complexity of the case, to prove the defectiveness or the causal link, or both. They should do so taking into account all the circumstances of the case. In such cases, imposing the usual standard of proof as required under national law, which often calls for a high degree of probability, would undermine the effectiveness of the right to compensation. Therefore, given that manufacturers have expert knowledge and are better informed than the injured person, and in order to maintain a fair apportionment of risk while avoiding a reversal of the burden of proof, that claimant should be required to demonstrate, where the claimant’s difficulties relate to proving defectiveness, only that it is likely that the product was defective, or, where the claimant’s difficulties relate to proving the causal link, only that the defectiveness of the product is a likely cause of the damage. Technical or scientific complexity should be determined by national courts on a case-by-case basis, taking into account various factors. Those factors should include the complex nature of the product, such as an innovative medical device; the complex nature of the technology used, such as machine learning; the complex nature of the information and data to be analysed by the claimant; and the complex nature of the causal link, such as a link between a pharmaceutical or food product and the onset of a health condition or a link that, in order to be proven, would require the claimant to explain the inner workings of an AI system. The assessment of excessive difficulties should also be made by national courts on a case-by-case basis. While a claimant should provide arguments to demonstrate excessive difficulties, proof of such difficulties should not be required. For example, in a claim concerning an AI system, the claimant should, for the court to decide that excessive difficulties exist, neither be required to explain the AI system’s specific characteristics nor how those characteristics make it harder to establish the causal link. The defendant should have the possibility of contesting all elements of the claim, including the existence of excessive difficulties. |
(49) |
In the interest of a fair apportionment of risk, economic operators should be exempted from liability if they can prove the existence of specific exonerating circumstances. They should not be liable where they can prove that a person other than themselves caused the product to leave the manufacturing process against their will or that compliance with legal requirements was precisely the reason for the product’s defectiveness. |
(50) |
The moment of placing on the market or putting into service is normally the moment when a product leaves the control of the manufacturer, while for distributors it is the moment when they make the product available on the market. Manufacturers should therefore be exempted from liability where they prove that it is probable that the defectiveness that caused the damage did not exist when they placed the product on the market or put it into service or that the defectiveness came into being after that moment. However, since digital technologies allow manufacturers to exercise control beyond the moment of placing the product on the market or putting into service, manufacturers should remain liable for defectiveness that comes into being after that moment as a result of software or related services within their control, be it in the form of updates or upgrades or machine-learning algorithms. Such software or related services should be considered to be within the manufacturer’s control where they are supplied by that manufacturer or where that manufacturer authorises them or otherwise consents to their supply by a third party. For example, if a smart television is presented as including a video application, but the user is required to download the application from a third party’s website after the purchase of the television, the television manufacturer should remain liable, alongside the manufacturer of the video application, for damage caused by any defectiveness of the video application, even though the defectiveness came into being only after the television was placed on the market. |
(51) |
The possibility for economic operators to avoid liability by proving that the defectiveness came into being after they placed the product on the market or put it into service should be restricted when a product’s defectiveness consists in the lack of software updates or upgrades necessary to address cybersecurity vulnerabilities and maintain the safety of the product. Such vulnerabilities can affect the product in such a way that it causes damage within the meaning of this Directive. In recognition of manufacturers’ responsibilities under Union law for the safety of products throughout their lifecycle, such as under Regulation (EU) 2017/745 of the European Parliament and of the Council (16), manufacturers should also not be exempted from liability for damage caused by their defective products when the defectiveness results from their failure to supply the software security updates or upgrades that are necessary to address those products’ vulnerabilities in response to evolving cybersecurity risks. Such liability should not apply where the supply or installation of such software is beyond the manufacturer’s control, for example where the owner of the product does not install an update or upgrade supplied for the purpose of ensuring or maintaining the level of safety of the product. This Directive does not impose any obligation to provide updates or upgrades for a product. |
(52) |
In the interests of a fair apportionment of risk, economic operators should be exempted from liability if they prove that the state of scientific and technical knowledge, determined with reference to the most advanced level of objective knowledge accessible and not to the actual knowledge of the economic operator in question, during the period in which the product was within the manufacturer’s control, was such that the existence of the defectiveness could not be discovered. |
(53) |
Situations can arise in which two or more parties are liable for the same damage, in particular where a defective component is integrated into a product that causes damage. In such a case, the injured person should be able to seek compensation both from the manufacturer that integrated the defective component into its product and from the manufacturer of the defective component itself. In order to ensure the protection of natural persons, all parties should be held liable jointly and severally in such situations. |
(54) |
A high degree of innovation is particularly necessary in the software sector. With a view to supporting the innovative capacity of microenterprises and small enterprises that manufacture software, it should be possible for such enterprises to contractually agree with manufacturers that integrate their software into a product that the latter will not seek recourse from the software manufacturer in the event of a defective software component causing harm. Such contractual agreements, already used in some Member States, should be allowed, since the manufacturer of the product as a whole is in any event liable for any defectiveness in the product, including in components. However, liability towards an injured person should never be limited or excluded by such a contractual agreement. |
(55) |
Situations can arise in which the acts and omissions of a person other than a potentially liable economic operator contribute, in addition to the defectiveness of the product, to the cause of the damage suffered, such as a third party exploiting a cybersecurity vulnerability of a product. In the interests of consumer protection, where a product is defective, for example due to a vulnerability that makes the product less safe than the public at large is entitled to expect, the liability of the economic operator should not be reduced or disallowed as a result of such acts or omissions by a third party. However, it should be possible to reduce or disallow the economic operator’s liability where injured persons themselves have negligently contributed to the cause of the damage, for example where the injured person negligently failed to install updates or upgrades provided by the economic operator that would have mitigated or avoided the damage. |
(56) |
The objective of protecting natural persons would be undermined if it were possible to limit or exclude an economic operator’s liability through contractual provisions. Therefore no contractual derogations should be permitted. For the same reason, it should not be possible for provisions of national law to limit or exclude liability, such as by setting financial ceilings on an economic operator’s liability. |
(57) |
Given that products age over time and that higher safety standards are developed as the state of science and technology progresses, it would not be reasonable to make manufacturers liable for an unlimited period of time for the defectiveness of their products. Therefore, liability should be subject to a reasonable length of time, namely 10 years from the placing on the market or putting into service of a product (the ‘expiry period’), without prejudice to claims pending in legal proceedings. In order to avoid unreasonably restricting the possibility of compensation for damage caused by a defective product, the expiry period should be extended to 25 years in cases where the symptoms of a personal injury are, according to medical evidence, slow to emerge. |
(58) |
Since substantially modified products are essentially new products, a new expiry period should start to run after a product has been substantially modified and has subsequently been made available on the market or put into service, for example as a result of remanufacturing. Updates or upgrades that do not amount to a substantial modification of the product should not affect the expiry period that applies to the original product. |
(59) |
The possibility provided for in this Directive whereby an economic operator that proves that the state of scientific and technical knowledge at the time when a product was placed on the market or put into service or during the period in which the product was within the manufacturer’s control was not such as to enable the existence of a defect to be discovered can avoid liability, the so-called ‘development risk defence’, could be deemed in certain Member States to limit unduly the protection of natural persons. It should therefore be possible for a Member State to derogate from that possibility by introducing new measures, or amending existing measures, to extend liability in such situations to specific types of products if it is deemed necessary, proportionate and justified by public interest objectives, such as those set out in the Treaty on the Functioning of the European Union, namely public policy, public security and public health. To ensure transparency and legal certainty for economic operators operating across the Union, the use of such a derogation from the development risk defence should be notified to the Commission, which should then inform the other Member States. In order to facilitate a coherent approach across Member States and consistency with the objectives of this Directive, the Commission should be able to issue non-binding opinions on the proposed measures or amendments. In order to allow time for the issuing of an opinion, a Member State proposing such measures or amendments should hold the proposed measures or amendments in abeyance for six months following their notification to the Commission, unless the Commission issues an opinion earlier. Such an opinion should be issued after close cooperation between the Member State concerned and the Commission, taking into account the views of other Member States, if any. In the interest of legal certainty and to facilitate continuity of arrangements established under Directive 85/374/EEC, it should also be possible for a Member State to maintain existing derogations from the development risk defence in its legal system. |
(60) |
In order to facilitate the harmonised interpretation of this Directive by national courts, Member States should be required to publish final court judgments on product liability under this Directive, meaning those judgments that cannot be, or can no longer be, appealed. In order to limit the administrative burden, Member States should be required only to publish judgments of national courts of appeal or of the highest instance. |
(61) |
To increase the understanding of how this Directive is applied at national level, for the benefit of, inter alia, the public, legal practitioners, academics and Member States, the Commission should set up and maintain an easily accessible and publicly available database containing the relevant judgments as well as references to relevant judgments delivered by the Court of Justice of the European Union. |
(62) |
The Commission should carry out an evaluation of this Directive. Pursuant to paragraph 22 of the Interinstitutional Agreement of 13 April 2016 on Better Law-Making (17), that evaluation should be based on the five criteria of efficiency, effectiveness, relevance, coherence and value added and should provide the basis for impact assessments of possible further measures. In its evaluation report, the Commission should provide the methodology for the calculations used in its evaluation. It is important that the Commission gather all relevant information in a way that avoids overregulation and an administrative burden for Member States and economic operators, using information from all relevant and reliable sources, including Union institutions, bodies, offices and agencies, national competent authorities and internationally recognised bodies and organisations. |
(63) |
For reasons of legal certainty, this Directive does not apply to products placed on the market or put into service before 9 December 2026. It is therefore necessary to provide for transitional arrangements in order to ensure continued liability under Directive 85/374/EEC for damage caused by defective products which have been placed on the market or put into service before that date. |
(64) |
Since the objectives of this Directive, namely to ensure the functioning of the internal market, undistorted competition and a high level of protection for natural persons, cannot be sufficiently achieved by the Member States due to the Union-wide nature of the market in goods but can rather, by reason of the harmonising effect of common rules on liability, be better achieved at Union level, the Union may adopt measures, in accordance with the principle of subsidiarity as set out in Article 5 of the Treaty on European Union. In accordance with the principle of proportionality, as set out in that Article, this Directive does not go beyond what is necessary in order to achieve those objectives, |
HAVE ADOPTED THIS DIRECTIVE:
CHAPTER I
GENERAL PROVISIONS
Article 1
Subject matter and objective
This Directive lays down common rules on the liability of economic operators for damage suffered by natural persons and caused by defective products, and on compensation for such damage.
The objective of this Directive is to contribute to the proper functioning of the internal market while ensuring a high level of protection of consumers and other natural persons.
Article 2
Scope
1. This Directive shall apply to products placed on the market or put into service after 9 December 2026.
2. This Directive does not apply to free and open-source software that is developed or supplied outside the course of a commercial activity.
3. This Directive does not apply to damage arising from nuclear accidents in so far as liability for such damage is covered by international conventions ratified by Member States.
4. This Directive does not affect:
(a) |
the applicability of Union law on the protection of personal data, in particular Regulation (EU) 2016/679 and Directives 2002/58/EC and (EU) 2016/680; |
(b) |
any right which an injured person has under national rules concerning contractual liability or concerning non-contractual liability on grounds other than the defectiveness of a product as provided for in this Directive, including national rules implementing Union law; |
(c) |
any right which an injured person has under any special liability system that existed in national law on 30 July 1985. |
Article 3
Level of harmonisation
Member States shall not maintain or introduce, in their national law, provisions diverging from those laid down in this Directive, including more stringent or less stringent provisions, to achieve a different level of protection for consumers and other natural persons, unless otherwise provided for in this Directive.
Article 4
Definitions
For the purposes of this Directive, the following definitions apply:
(1) |
‘product’ means all movables, even if integrated into, or inter-connected with, another movable or an immovable; it includes electricity, digital manufacturing files, raw materials and software; |
(2) |
‘digital manufacturing file’ means a digital version of, or digital template for, a movable which contains the functional information necessary to produce a tangible item by enabling the automated control of machinery or tools; |
(3) |
‘related service’ means a digital service that is integrated into, or inter-connected with, a product in such a way that its absence would prevent the product from performing one or more of its functions; |
(4) |
‘component’ means any item, whether tangible or intangible, raw material or related service, that is integrated into, or inter-connected with, a product; |
(5) |
‘manufacturer’s control’ means that:
|
(6) |
‘data’ means data as defined in Article 2, point (1), of Regulation (EU) 2022/868 of the European Parliament and of the Council (18); |
(7) |
‘making available on the market’ means any supply of a product for distribution, consumption or use on the Union market in the course of a commercial activity, whether in return for payment or free of charge; |
(8) |
‘placing on the market’ means the first making available of a product on the Union market; |
(9) |
‘putting into service’ means the first use of a product in the Union in the course of a commercial activity, whether in return for payment or free of charge, in circumstances in which that product has not been placed on the market prior to its first use; |
(10) |
‘manufacturer’ means any natural or legal person who:
|
(11) |
‘authorised representative’ means any natural or legal person established within the Union who has received a written mandate from a manufacturer to act on that manufacturer’s behalf in relation to specified tasks; |
(12) |
‘importer’ means any natural or legal person who places a product from a third country on the Union market; |
(13) |
‘fulfilment service provider’ means any natural or legal person offering, in the course of a commercial activity, at least two of the following services: warehousing, packaging, addressing and dispatching of a product, without having ownership of that product, excluding postal services as defined in Article 2, point (1), of Directive 97/67/EC of the European Parliament and of the Council (19), parcel delivery services as defined in Article 2, point (2), of Regulation (EU) 2018/644 of the European Parliament and of the Council (20), and any other postal services or freight transport services; |
(14) |
‘distributor’ means any natural or legal person in the supply chain who makes a product available on the market, other than the manufacturer or importer of that product; |
(15) |
‘economic operator’ means a manufacturer of a product or component, a provider of a related service, an authorised representative, an importer, a fulfilment service provider or a distributor; |
(16) |
‘online platform’ means online platform as defined in Article 3, point (i), of Regulation (EU) 2022/2065; |
(17) |
‘trade secret’ means trade secret as defined in Article 2, point (1), of Directive (EU) 2016/943; |
(18) |
‘substantial modification’ means a modification of a product after it has been placed on the market or put into service:
|
CHAPTER II
SPECIFIC PROVISIONS ON LIABILITY FOR DEFECTIVE PRODUCTS
Article 5
Right to compensation
1. Member States shall ensure that any natural person who suffers damage caused by a defective product (the ‘injured person’) is entitled to compensation in accordance with this Directive.
2. Member States shall ensure that claims for compensation pursuant to paragraph 1 may also be brought by:
(a) |
a person that succeeded, or was subrogated, to the right of the injured person by virtue of Union or national law or contract; or |
(b) |
a person acting on behalf of one or more injured persons by virtue of Union or national law. |
Article 6
Damage
1. The right to compensation pursuant to Article 5 shall apply in respect of only the following types of damage:
(a) |
death or personal injury, including medically recognised damage to psychological health; |
(b) |
damage to, or destruction of, any property, except:
|
(c) |
destruction or corruption of data that are not used for professional purposes. |
2. The right to compensation pursuant to Article 5 shall cover all material losses resulting from the damage referred to in paragraph 1 of this Article. The right to compensation shall also cover non-material losses resulting from the damage referred to in paragraph 1 of this Article, in so far as they can be compensated for under national law.
3. This Article does not affect national law relating to compensation for damage under other liability regimes.
Article 7
Defectiveness
1. A product shall be considered defective where it does not provide the safety that a person is entitled to expect or that is required under Union or national law.
2. In assessing the defectiveness of a product, all circumstances shall be taken into account, including:
(a) |
the presentation and the characteristics of the product, including its labelling, design, technical features, composition and packaging and the instructions for its assembly, installation, use and maintenance; |
(b) |
reasonably foreseeable use of the product; |
(c) |
the effect on the product of any ability to continue to learn or acquire new features after it is placed on the market or put into service; |
(d) |
the reasonably foreseeable effect on the product of other products that can be expected to be used together with the product, including by means of inter-connection; |
(e) |
the moment in time when the product was placed on the market or put into service or, where the manufacturer retains control over the product after that moment, the moment in time when the product left the control of the manufacturer; |
(f) |
relevant product safety requirements, including safety-relevant cybersecurity requirements; |
(g) |
any recall of the product or any other relevant intervention relating to product safety by a competent authority or by an economic operator as referred to in Article 8; |
(h) |
the specific needs of the group of users for whose use the product is intended; |
(i) |
in the case of a product whose very purpose is to prevent damage, any failure of the product to fulfil that purpose. |
3. A product shall not be considered to be defective for the sole reason that a better product, including updates or upgrades for a product, has already been or is subsequently placed on the market or put into service.
Article 8
Economic operators liable for defective products
1. Member States shall ensure that the following economic operators are liable for damage in accordance with this Directive:
(a) |
the manufacturer of a defective product; |
(b) |
the manufacturer of a defective component, where that component was integrated into, or inter-connected with, a product within the manufacturer’s control and caused that product to be defective, and without prejudice to the liability of the manufacturer referred to in point (a); and |
(c) |
in the case of a manufacturer of a product or a component established outside the Union, and without prejudice to the liability of that manufacturer:
|
The liability of the manufacturer referred to in the first subparagraph, point (a), shall also cover any damage caused by a defective component where it was integrated into, or inter-connected with, a product within that manufacturer’s control.
2. Any natural or legal person that substantially modifies a product outside the manufacturer’s control and thereafter makes it available on the market or puts it into service shall be considered to be a manufacturer of that product for the purposes of paragraph 1.
3. Member States shall ensure that, where an economic operator from among those referred to in paragraph 1 and established in the Union cannot be identified, each distributor of the defective product is liable where:
(a) |
the injured person requests that distributor to identify an economic operator from among those referred to in paragraph 1 and established in the Union, or its own distributor that supplied it with that product; and |
(b) |
that distributor fails to identify an economic operator or its own distributor, as referred to in point (a), within one month of receiving the request referred to in point (a). |
4. Paragraph 3 of this Article shall also apply to any provider of an online platform that allows consumers to conclude distance contracts with traders and that is not an economic operator, provided that the conditions set out in Article 6(3) of Regulation (EU) 2022/2065 are fulfilled.
5. Where victims fail to obtain compensation because none of the persons referred to in paragraphs 1 to 4 can be held liable under this Directive, or because the liable persons are insolvent or have ceased to exist, Member States may use existing national sectoral compensation schemes or establish new ones under national law, preferably not funded by public revenue, to appropriately compensate injured persons who have suffered damage caused by defective products.
Article 9
Disclosure of evidence
1. Member States shall ensure that, at the request of a person who is claiming compensation in proceedings before a national court for damage caused by a defective product (the ‘claimant’) and who has presented facts and evidence sufficient to support the plausibility of the claim for compensation, the defendant is required to disclose relevant evidence that is at the defendant’s disposal, subject to the conditions set out in this Article.
2. Member States shall ensure that, at the request of a defendant that has presented facts and evidence sufficient to demonstrate the defendant’s need for evidence for the purposes of countering a claim for compensation, the claimant is required, in accordance with national law, to disclose relevant evidence that is at the claimant’s disposal.
3. Member States shall ensure that the disclosure of evidence pursuant to paragraphs 1 and 2, and in accordance with national law, is limited to what is necessary and proportionate.
4. Member States shall ensure that, when determining whether the disclosure of evidence requested by a party is necessary and proportionate, national courts consider the legitimate interests of all parties concerned, including third parties, in particular in relation to the protection of confidential information and trade secrets.
5. Member States shall ensure that, where a defendant is required to disclose information that is a trade secret or an alleged trade secret, national courts are empowered, upon a duly reasoned request of a party or on their own initiative, to take the specific measures necessary to preserve the confidentiality of that information when it is used or referred to in the course of or after the legal proceedings.
6. Member States shall ensure that, where a party is required to disclose evidence, national courts are empowered, upon a duly reasoned request of the opposing party or where the national court concerned deems it appropriate and in accordance with national law, to require such evidence to be presented in an easily accessible and easily understandable manner, if such presentation is deemed proportionate by the national court in terms of costs and effort for the required party.
7. This Article does not affect national rules relating to the pre-trial disclosure of evidence, where such rules exist.
Article 10
Burden of proof
1. Member States shall ensure that a claimant is required to prove the defectiveness of the product, the damage suffered and the causal link between that defectiveness and that damage.
2. The defectiveness of the product shall be presumed where any of the following conditions are met:
(a) |
the defendant fails to disclose relevant evidence pursuant to Article 9(1); |
(b) |
the claimant demonstrates that the product does not comply with mandatory product safety requirements laid down in Union or national law that are intended to protect against the risk of the damage suffered by the injured person; or |
(c) |
the claimant demonstrates that the damage was caused by an obvious malfunction of the product during reasonably foreseeable use or under ordinary circumstances. |
3. The causal link between the defectiveness of the product and the damage shall be presumed where it has been established that the product is defective and that the damage caused is of a kind typically consistent with the defect in question.
4. A national court shall presume the defectiveness of the product or the causal link between its defectiveness and the damage, or both, where, despite the disclosure of evidence in accordance with Article 9 and taking into account all the relevant circumstances of the case:
(a) |
the claimant faces excessive difficulties, in particular due to technical or scientific complexity, in proving the defectiveness of the product or the causal link between its defectiveness and the damage, or both; and |
(b) |
the claimant demonstrates that it is likely that the product is defective or that there is a causal link between the defectiveness of the product and the damage, or both. |
5. The defendant shall have the right to rebut any of the presumptions referred to in paragraphs 2, 3 and 4.
Article 11
Exemption from liability
1. An economic operator as referred to in Article 8 shall not be liable for damage caused by a defective product if that economic operator proves any of the following:
(a) |
in the case of a manufacturer or importer, that it did not place the product on the market or put it into service; |
(b) |
in the case of a distributor, that it did not make the product available on the market; |
(c) |
that it is probable that the defectiveness that caused the damage did not exist at the time the product was placed on the market, put into service or, in the case of a distributor, made available on the market, or that that defectiveness came into being after that moment; |
(d) |
that the defectiveness that caused the damage is due to compliance of the product with legal requirements; |
(e) |
that the objective state of scientific and technical knowledge at the time the product was placed on the market or put into service or during the period in which the product was within the manufacturer’s control was not such that the defectiveness could be discovered; |
(f) |
in the case of a manufacturer of a defective component, as referred to in Article 8(1), first subparagraph, point (b), that the defectiveness of the product in which that component has been integrated is attributable to the design of that product or to the instructions given by the manufacturer of that product to the manufacturer of that component; |
(g) |
in the case of a person that modifies a product as referred to in Article 8(2), that the defectiveness that caused the damage is related to a part of the product not affected by the modification. |
2. By way of derogation from paragraph 1, point (c), an economic operator shall not be exempted from liability where the defectiveness of a product is due to any of the following, provided that it is within the manufacturer’s control:
(a) |
a related service; |
(b) |
software, including software updates or upgrades; |
(c) |
a lack of software updates or upgrades necessary to maintain safety; |
(d) |
a substantial modification of the product. |
CHAPTER III
GENERAL PROVISIONS ON LIABILITY
Article 12
Liability of multiple economic operators
1. Without prejudice to national law concerning rights of contribution or recourse, Member States shall ensure that where two or more economic operators are liable for the same damage pursuant to this Directive, they can be held liable jointly and severally.
2. A manufacturer that integrates software as a component in a product shall not have a right of recourse against the manufacturer of a defective software component that causes damage where:
(a) |
the manufacturer of the defective software component was, at the time of the placing on the market of that software component, a microenterprise or a small enterprise, meaning an enterprise that, when assessed together with all of its partner enterprises as defined in Article 3(2) of the Annex to Commission Recommendation 2003/361/EC (21) and linked enterprises as defined in Article 3(3) of that Annex, if any, is a microenterprise as defined in Article 2(3) of that Annex or a small enterprise as defined in Article 2(2) of that Annex; and |
(b) |
the manufacturer that integrated the defective software component in the product contractually agreed with the manufacturer of the defective software component to waive that right. |
Article 13
Reduction of liability
1. Without prejudice to national law concerning rights of contribution or recourse, Member States shall ensure that the liability of an economic operator is not reduced or disallowed where the damage is caused both by the defectiveness of a product and by an act or omission of a third party.
2. The liability of an economic operator may be reduced or disallowed where the damage is caused both by the defectiveness of the product and by the fault of the injured person or any person for whom the injured person is responsible.
Article 14
Right of recourse
Where more than one economic operator is liable for the same damage, an economic operator that has compensated the injured person shall be entitled to pursue remedies against other economic operators liable pursuant to Article 8 in accordance with national law.
Article 15
Exclusion or limitation of liability
Member States shall ensure that the liability of an economic operator pursuant to this Directive is not, in relation to the injured person, limited or excluded by a contractual provision or by national law.
Article 16
Limitation period
1. Member States shall ensure that a limitation period of three years applies to the initiation of proceedings to claim compensation for damage falling within the scope of this Directive. The limitation period shall run from the day on which the injured person became aware, or should reasonably have become aware, of all of the following:
(a) |
the damage; |
(b) |
the defectiveness; |
(c) |
the identity of the relevant economic operator that can be held liable for that damage under Article 8. |
2. National law regulating the suspension or interruption of the limitation period referred to in paragraph 1 shall not be affected by this Directive.
Article 17
Expiry period
1. Member States shall ensure that an injured person is no longer entitled to compensation pursuant to this Directive upon the expiry of a period of 10 years, unless that injured person has, in the meantime, initiated proceedings against an economic operator that can be held liable pursuant to Article 8. That period shall run from:
(a) |
the date on which the defective product which caused the damage was placed on the market or put into service; or |
(b) |
in the case of a substantially modified product, the date on which that product was made available on the market or put into service following its substantial modification. |
2. By way of exception from paragraph 1, where an injured person has not been able to initiate proceedings within 10 years of the dates referred to in paragraph 1 due to the latency of a personal injury, the injured person shall no longer be entitled to compensation pursuant to this Directive upon the expiry of a period of 25 years, unless that injured person has, in the meantime, initiated proceedings against an economic operator that can be held liable pursuant to Article 8.
CHAPTER IV
FINAL PROVISIONS
Article 18
Derogation from development risk defence
1. Member States may, by way of derogation from Article 11(1), point (e), maintain in their legal systems existing measures whereby economic operators are liable even if they prove that the objective state of scientific and technical knowledge at the time the product was placed on the market or put into service or during the period in which the product was within the manufacturer’s control was not such that the defectiveness could be discovered.
Any Member State wishing to maintain measures in accordance with this paragraph shall notify the text of the measures to the Commission no later than 9 December 2026. The Commission shall inform the other Member States thereof.
2. Member States may, by way of derogation from Article 11(1), point (e), introduce or amend in their legal systems measures whereby economic operators are liable even if they prove that the objective state of scientific and technical knowledge at the time the product was placed on the market or put into service or during the period in which the product was within the manufacturer’s control was not such that the defectiveness could be discovered.
3. The measures referred to in paragraph 2 shall be:
(a) |
limited to specific categories of products; |
(b) |
justified by public interest objectives; and |
(c) |
proportionate in that they are suitable for securing the attainment of the objectives pursued and do not go beyond what is necessary to attain those objectives. |
4. Any Member State wishing to introduce or amend a measure referred to in paragraph 2 shall notify the text of the proposed measure to the Commission and shall provide a justification of how that measure complies with paragraph 3. The Commission shall inform the other Member States thereof.
5. The Commission may, within six months of receiving a notification pursuant to paragraph 4, issue an opinion on the text of the proposed measure and the justification for that measure, taking into account any observations received from other Member States. The Member State wishing to introduce or amend that measure shall hold that measure in abeyance for six months following its notification to the Commission, unless the Commission issues its opinion earlier.
Article 19
Transparency
1. Member States shall publish, in an easily accessible and electronic format, any final judgment delivered by their national courts of appeal or of the highest instance in proceedings launched pursuant to this Directive. The publication of such a judgment shall be carried out in accordance with national law.
2. The Commission shall set up and maintain an easily accessible and publicly available database containing the judgments referred to in paragraph 1.
Article 20
Evaluation
The Commission shall by 9 December 2030, and every five years thereafter, evaluate the application of this Directive and submit a report to the European Parliament, to the Council and to the European Economic and Social Committee. Those reports shall include information about the cost and benefits of the transposition of this Directive, a comparison with OECD countries and the availability of product liability insurance.
Article 21
Repeal and transitional provision
Directive 85/374/EEC is repealed with effect from 9 December 2026. However, it shall continue to apply with regard to products placed on the market or put into service before that date.
References to the repealed Directive shall be construed as references to this Directive and shall be read in accordance with the correlation table set out in the Annex.
Article 22
Transposition
1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 9 December 2026. They shall immediately inform the Commission thereof.
When Member States adopt those measures, they shall contain a reference to this Directive or shall be accompanied by such a reference on the occasion of their official publication. The methods of making such reference shall be laid down by the Member States.
2. Member States shall communicate to the Commission the text of the main measures of national law which they adopt in the field covered by this Directive.
Article 23
Entry into force
This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Article 24
Addressees
This Directive is addressed to the Member States.
Done at Strasbourg, 23 October 2024.
For the European Parliament
The President
R. METSOLA
For the Council
The President
ZSIGMOND B. P.
(1) OJ C 140, 21.4.2023, p. 34.
(2) Position of the European Parliament of 12 March 2024 (not yet published in the Official Journal) and decision of the Council of 10 October 2024.
(3) Council Directive 85/374/EEC of 25 July 1985 on the approximation of the laws, regulations and administrative provisions of the Member States concerning liability for defective products (OJ L 210, 7.8.1985, p. 29).
(4) Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for the marketing of products, and repealing Council Decision 93/465/EEC (OJ L 218, 13.8.2008, p. 82).
(5) Regulation (EU) 2024/1689 of the European Parliament and of the Council of 13 June 2024 laying down harmonised rules on artificial intelligence and amending Regulations (EC) No 300/2008, (EU) No 167/2013, (EU) No 168/2013, (EU) 2018/858, (EU) 2018/1139 and (EU) 2019/2144 and Directives 2014/90/EU, (EU) 2016/797 and (EU) 2020/1828 (Artificial Intelligence Act) (OJ L, 2024/1689, 12.7.2024, ELI: http://data.europa.eu/eli/reg/2024/1689/oj).
(6) Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ L 119, 4.5.2016, p. 1).
(7) Regulation (EU) 2018/1725 of the European Parliament and of the Council of 23 October 2018 on the protection of natural persons with regard to the processing of personal data by the Union institutions, bodies, offices and agencies and on the free movement of such data, and repealing Regulation (EC) No 45/2001 and Decision No 1247/2002/EC (OJ L 295, 21.11.2018, p. 39).
(8) Directive 2002/58/EC of the European Parliament and of the Council of 12 July 2002 concerning the processing of personal data and the protection of privacy in the electronic communications sector (Directive on privacy and electronic communications) (OJ L 201, 31.7.2002, p. 37).
(9) Directive (EU) 2016/680 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data by competent authorities for the purposes of the prevention, investigation, detection or prosecution of criminal offences or the execution of criminal penalties, and on the free movement of such data, and repealing Council Framework Decision 2008/977/JHA (OJ L 119, 4.5.2016, p. 89).
(10) Regulation (EU) 2017/2394 of the European Parliament and of the Council of 12 December 2017 on cooperation between national authorities responsible for the enforcement of consumer protection laws and repealing Regulation (EC) No 2006/2004 (OJ L 345, 27.12.2017, p. 1).
(11) Directive (EU) 2020/1828 of the European Parliament and of the Council of 25 November 2020 on representative actions for the protection of the collective interests of consumers and repealing Directive 2009/22/EC (OJ L 409, 4.12.2020, p. 1).
(12) Regulation (EU) 2019/1020 of the European Parliament and of the Council of 20 June 2019 on market surveillance and compliance of products and amending Directive 2004/42/EC and Regulations (EC) No 765/2008 and (EU) No 305/2011 (OJ L 169, 25.6.2019, p. 1).
(13) Regulation (EU) 2023/988 of the European Parliament and of the Council of 10 May 2023 on general product safety, amending Regulation (EU) No 1025/2012 of the European Parliament and of the Council and Directive (EU) 2020/1828 of the European Parliament and the Council, and repealing Directive 2001/95/EC of the European Parliament and of the Council and Council Directive 87/357/EEC (OJ L 135, 23.5.2023, p. 1).
(14) Regulation (EU) 2022/2065 of the European Parliament and of the Council of 19 October 2022 on a Single Market For Digital Services and amending Directive 2000/31/EC (Digital Services Act) (OJ L 277, 27.10.2022, p. 1).
(15) Directive (EU) 2016/943 of the European Parliament and of the Council of 8 June 2016 on the protection of undisclosed know-how and business information (trade secrets) against their unlawful acquisition, use and disclosure (OJ L 157, 15.6.2016, p. 1).
(16) Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017 on medical devices, amending Directive 2001/83/EC, Regulation (EC) No 178/2002 and Regulation (EC) No 1223/2009 and repealing Council Directives 90/385/EEC and 93/42/EEC (OJ L 117, 5.5.2017, p. 1).
(17) OJ L 123, 12.5.2016, p. 1.
(18) Regulation (EU) 2022/868 of the European Parliament and of the Council of 30 May 2022 on European data governance and amending Regulation (EU) 2018/1724 (Data Governance Act) (OJ L 152, 3.6.2022, p. 1).
(19) Directive 97/67/EC of the European Parliament and of the Council of 15 December 1997 on common rules for the development of the internal market of Community postal services and the improvement of quality of service (OJ L 15, 21.1.1998, p. 14).
(20) Regulation (EU) 2018/644 of the European Parliament and of the Council of 18 April 2018 on cross-border parcel delivery services (OJ L 112, 2.5.2018, p. 19).
(21) Commission Recommendation 2003/361/EC of 6 May 2003 concerning the definition of micro, small and medium-sized enterprises (OJ L 124, 20.5.2003, p. 36).
ANNEX
Correlation table
Directive 85/374/EEC |
This Directive |
Article 1 |
Article 1 |
— |
Article 2(2) |
— |
Article 3 |
Article 2 |
Article 4, point (1) |
— |
Article 4, points (2) to (9), (11) and (13) to (18) |
Article 3(1) |
Article 4, point (10), and Article 8(1), first subparagraph, points (a) and (b) |
Article 3(2) |
Article 4, point (12), and Article 8(1), first subparagraph, point (c)(i) |
— |
Article 5 |
Article 3(3) |
Article 8(3) |
— |
Article 8(1), first subparagraph, point (c)(ii) and (iii), and second subparagraph, and (2), (4) and (5) |
— |
Article 9 |
Article 4 |
Article 10(1) |
— |
Article 10(2) to (5) |
Article 5 |
Article 12(1) |
— |
Article 12(2) |
Article 6 |
Article 7 |
Article 7 |
Article 11 |
Article 8 |
Article 13 |
— |
Article 14 |
Article 9, first paragraph, point (a) |
Article 6(1), point (a) |
Article 9, first paragraph, point (b) |
Article 6(1), point (b) |
— |
Article 6(1), point (c) |
— |
Article 6(2) |
Article 9, second paragraph |
Article 6(3) |
Article 10 |
Article 16 |
Article 11 |
Article 17(1) |
— |
Article 17(2) |
Article 12 |
Article 15 |
— |
Article 19 |
Article 13 |
Article 2(5), points (b) and (c) |
— |
Article 2(5), point (a) |
Article 14 |
Article 2(3) |
— |
Article 18(1) |
Article 15(1), point (b) |
Article 18(2) |
Article 15(2) and (3) |
Article 18(3), (4) and (5) |
Article 16 |
— |
Article 17 |
Article 2(1) |
— |
Article 20 |
— |
Article 21 |
Article 18 |
— |
Article 19 |
Article 22(1) |
Article 20 |
Article 22(2) |
Article 21 |
Article 20 |
— |
Article 23 |
Article 22 |
Article 24 |
ELI: http://data.europa.eu/eli/dir/2024/2853/oj
ISSN 1977-0677 (electronic edition)