EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32023D0941

Commission Implementing Decision (EU) 2023/941 of 2 May 2023 on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council (Text with EEA relevance)

C/2023/2898

OJ L 125, 11.5.2023, p. 37–58 (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

Legal status of the document In force: This act has been changed. Current consolidated version: 11/12/2023

ELI: http://data.europa.eu/eli/dec_impl/2023/941/oj

11.5.2023   

EN

Official Journal of the European Union

L 125/37


COMMISSION IMPLEMENTING DECISION (EU) 2023/941

of 2 May 2023

on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (1), and in particular Article 10(6) thereof,

Whereas:

(1)

In accordance with Article 14 of Regulation (EU) 2016/425 of the European Parliament and of the Council (2), personal protective equipment that is in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, is to be presumed to be in conformity with the essential health and safety requirements set out in Annex II to that Regulation covered by those standards or parts thereof.

(2)

In Commission Implementing Decision C(2020)7924 (3), the Commission calls upon the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (Cenelec) to draft harmonised standards in support of Regulation (EU) 2016/425.

(3)

On the basis of the request set out in Implementing Decision C(2020)7924, CEN drafted several new standards and revised a number of existing harmonised standards.

(4)

On the basis of Implementing Decision C(2020)7924, CEN drafted the following new harmonised standards: EN 13138-1:2021 on safety requirements and test methods for buoyant aids for swimming instructions, as corrected by EN 13138-1:2021/AC:2022, EN 17520:2021 on safety requirements and test methods for personal belay lanyards, and EN ISO 16321-2:2021 on additional requirements for eye and face protection used during welding and related techniques in support of Regulation (EU) 2016/425.

(5)

On the basis of Implementing Decision C(2020)7924, CEN revised the harmonised standards EN 166:2001, EN 169:2002, EN 170:2002, EN 171:2002, EN 172:1994 as amended by EN 172:1994/A1:2000 and EN 172:1994/A2:2001, EN 174:2001, EN 379:2003+A1:2009, EN 1731:2006 and EN ISO 20345:2011. That revision resulted in the adoption of harmonised standards EN ISO 16321-1:2022 on general requirements for eye and face protection for occupational use, EN ISO 16321-3:2022 on additional requirements for mesh eye and face protectors, EN ISO 18527-1:2022 on requirements for downhill skiing and snowboarding goggles and EN ISO 20345:2022 on safety footwear.

(6)

The Commission together with CEN has assessed whether the harmonised standards drafted and revised by CEN comply with the request set out in Implementing Decision C(2020)7924.

(7)

The harmonised standards EN 13138-1:2021, as corrected by EN 1318-1:2021/AC:2022, EN ISO 16321-1:2022, EN ISO 16321-2:2021, EN ISO 16321-3:2022, EN 17520:2021, EN ISO 18527-1:2022 and EN ISO 20345:2022 satisfy the requirements which they aim to cover and which are set out in Regulation (EU) 2016/425. It is therefore appropriate to publish the references of those harmonised standards in the Official Journal of the European Union.

(8)

The harmonised standards EN ISO 16321-2:2021 and EN ISO 16321-3:2022 refer to a normative reference standard EN ISO 16321-1:2020, the date of which is incorrect. Those harmonised standards should therefore be published with restriction in the Official Journal of the European Union.

(9)

It is necessary to withdraw the references of harmonised standards EN 166:2001, EN 169:2002, EN 170:2002, EN 172:1994 as amended by EN 172:1994/A1:2000, and EN 172:1994/A2:2001, EN 174:2001, EN 379:2003+A1:2009, EN 1731:2006 and EN ISO 20345:2011 from the Official Journal of the European Union, given that those standards have been revised.

(10)

In the interests of clarity and rationality, a complete list of references of harmonised standards drafted in support of Regulation (EU) 2016/425 and satisfying the requirements they aim to cover should be published in a single act. The references of harmonised standards drafted in support of Regulation (EU) 2016/425 are currently set out in Commission Implementing Decision (EU) 2020/668 (4) and Commission Communication 2018/C 209/03 (5).

(11)

Implementing Decision (EU) 2020/668 has been substantially amended several times. In the interests of clarity and rationality, and since further amendment needs to be made to that Implementing Decision, that Implementing Decision should be replaced.

(12)

Many of the references of harmonised standards published by Communication 2018/C 209/03 have been withdrawn by Implementing Decision (EU) 2020/668. Implementing Decision (EU) 2020/668 provides for the withdrawal of the remaining references of harmonised standards that are published by that Communication. In the interests of clarity and rationality, Communication 2018/C 209/03 should be repealed. To give manufacturers sufficient time to adapt their products to the revised versions of the standards concerned, Communication 2018/C 209/03 should continue to apply until the dates of withdrawal of the references of the concerned harmonised standards published by that Communication.

(13)

Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,

HAS ADOPTED THIS DECISION:

Article 1

The references to harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.

Article 2

Implementing Decision (EU) 2020/668 is repealed.

Article 3

Communication 2018/C 209/03 is repealed.

However, it shall continue to apply in respect of the references of harmonised standards listed in Annex II to this Decision until the dates of withdrawal of those references set out in that Annex.

Article 4

This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.

Done at Brussels, 2 May 2023.

For the Commission

The President

Ursula VON DER LEYEN


(1)   OJ L 316, 14.11.2012, p. 12.

(2)  Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC (OJ L 81, 31.3.2016, p. 51).

(3)  Commission Implementing Decision C(2020)7924 of 19 November 2020 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards personal protective equipment in support of Regulation (EU) 2016/425 of the European Parliament and of the Council.

(4)  Commission Implementing Decision (EU) 2020/668 of 18 May 2020 on the harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council (OJ L 156, 19.5.2020, p. 13).

(5)  Commission communication 2018/C 209/03 in the framework of the implementation of Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment and repealing Council Directive 89/686/EEC (OJ C 209, 15.6.2018, p. 17).


ANNEX I

No

Reference of the standard

1.

EN 136:1998

Respiratory protective devices – Full face masks – Requirements, testing, marking

EN 136:1998/AC:2003

2.

EN 137:2006

Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking

3.

EN 140:1998

Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking

EN 140:1998/AC:1999

4.

EN 142:2002

Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking

5.

EN 143:2021

Respiratory protective devices – Particle filters – Requirements, testing, marking

6.

EN 144-1:2000

Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector

EN 144-1:2000/A1:2003

EN 144-1:2000/A2:2005

7.

EN 144-2:1998

Respiratory protective devices – Gas cylinder valves – Part 2: Outlet connections

8.

EN 144-3:2003

Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygen

EN 144-3:2003/AC:2003

9.

EN 145:1997

Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking

EN 145:1997/A1:2000

10.

EN 148-1:1999

Respiratory protective devices – Threads for facepieces – Part 1: Standard thread connection

11.

EN 148-2:1999

Respiratory protective devices – Threads for facepieces – Part 2: Centre thread connection

12.

EN 148-3:1999

Respiratory protective devices – Threads for facepieces – Part 3: Tread connection M 45 x 3

13.

EN 149:2001+A1:2009

Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking

14.

EN 175:1997

Personal protection – Equipment for eye and face protection during welding and allied processes

15.

EN 207:2017

Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors)

16.

EN 208:2009

Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)

17.

EN 250:2014

Respiratory equipment – Open-circuit self-contained compressed air diving apparatus – Requirements, testing and marking

18.

EN 342:2017

Protective clothing – Ensembles and garments for protection against cold

19.

EN 343:2019

Protective clothing – Protection against rain

20.

EN 352-1:2020

Hearing protectors – General requirements – Part 1: Earmuffs

Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.

21.

EN 352-2:2020

Hearing protectors – General requirements – Part 2: Earplugs

Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.

22.

EN 352-3:2020

Hearing protectors – General requirements – Part 3: Earmuffs attached to head protection and/or face protection devices

Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.

23.

EN 352-4:2020

Hearing protectors – Safety requirements – Part 4: Level-dependent earmuffs

24.

EN 352-5:2020

Hearing protectors – Safety requirements – Part 5: Active noise reduction earmuffs

25.

EN 352-6:2020

Hearing protectors – Safety requirements – Part 6: Earmuffs with safety-related audio input

26.

EN 352-7:2020

Hearing protectors – Safety requirements – Part 7: Level-dependent earplugs

27.

EN 352-8:2020

Hearing protectors – Safety requirements – Part 8: Entertainment audio earmuffs

28.

EN 352-9:2020

Hearing protectors – Safety requirements – Part 9: Earplugs with safety-related audio input

29.

EN 352-10:2020

Hearing protectors – Safety requirements – Part 10: Entertainment audio earplugs

30.

EN 353-1:2014+A1:2017

Personal fall protection equipment – Guided type fall arresters including an anchor line – Part 1: Guided type fall arresters including a rigid anchor line

31.

EN 353-2:2002

Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line

32.

EN 354:2010

Personal fall protection equipment – Lanyards

33.

EN 355:2002

Personal protective equipment against falls from a height – Energy absorbers

34.

EN 358:2018

Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint

35.

EN 360:2002

Personal protective equipment against falls from a height – Retractable type fall arresters

36.

EN 361:2002

Personal protective equipment against falls from a height – Full body harnesses

37.

EN 362:2004

Personal protective equipment against falls from a height – Connectors

38.

EN 365:2004

Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging

EN 365:2004/AC:2006

39.

EN ISO 374-1:2016

Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)

40.

EN ISO 374-5:2016

Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)

41.

EN 388:2016+A1:2018

Protective gloves against mechanical risks

42.

EN 397:2012+A1:2012

Industrial safety helmets

43.

EN 402:2003

Respiratory protective devices – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape – Requirements, testing, marking

44.

EN 403:2004

Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking

45.

EN 404:2005

Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly

46.

EN 405:2001+A1:2009

Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking

47.

EN 407:2004

Protective gloves against thermal risks (heat and/or fire)

48.

EN 420:2003+A1:2009

Protective gloves – General requirements and test methods

49.

EN 421:2010

Protective gloves against ionizing radiation and radioactive contamination

50.

EN 443:2008

Helmets for fire fighting in buildings and other structures

51.

EN 469:2020

Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities

52.

EN 510:2019

Specification for protective clothing for use where there is a risk of entanglement with moving parts

53.

EN 511:2006

Protective gloves against cold

54.

EN 564:2014

Mountaineering equipment – Accessory cord – Safety requirements and test methods

55.

EN 565:2017

Mountaineering equipment – Tape – Safety requirements and test methods

56.

EN 566:2017

Mountaineering equipment – Slings – Safety requirements and test methods

57.

EN 567:2013

Mountaineering equipment – Rope clamps – Safety requirements and test methods

58.

EN 568:2015

Mountaineering equipment – Ice anchors – Safety requirements and test methods

59.

EN 569:2007

Mountaineering equipment – Pitons – Safety requirements and test methods

60.

EN 659:2003+A1:2008

Protective gloves for firefighters

EN 659:2003+A1:2008/AC:2009

61.

EN 795:2012

Personal fall protection equipment – Anchor devices

Warning: This publication does not concern the equipment described in:

type A (anchor devices with one or more stationary anchor points and with the need for structural anchors or fixing elements to fix to the structure) referred to in clauses 3.2.1, 4.4.1, 5.3;

type C (anchor devices employing horizontal flexible anchor lines) referred to in clauses 3.2.3, 4.4.3 and 5.5;

type D (anchor devices employing horizontal rigid anchor lines) referred to in clauses 3.2.4, 4.4.4 and 5.6;

any combination of the above. In respect of types A, C and D, this publication does not concern either clauses: 4.5, 5.2.2, 6, 7; Annex A or Annex ZA. Accordingly, in respect of the equipment mentioned above, there shall be no presumption of conformity with the provisions of Regulation (EU) 2016/425 because they are not considered to be PPE.

62.

EN 812:2012

Industrial bump caps

63.

EN 813:2008

Personal fall protection equipment – Sit harnesses

64.

EN 893:2019

Mountaineering equipment – Crampons – Safety requirements and test methods

65.

EN 943-1:2015+A1:2019

Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits

66.

EN 943-2:2019

Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET)

67.

EN 958:2017

Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods

68.

EN 966:2012+A1:2012

Helmets for airborne sports

69.

EN 1073-1:2016+A1:2018

Protective clothing against solid airborne particles including radioactive contamination – Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract

70.

EN 1073-2:2002

Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination

71.

EN 1077:2007

Helmets for alpine skiers and snowboarders

72.

EN 1078:2012+A1:2012

Helmets for pedal cyclists and for users of skateboards and roller skates

73.

EN 1080:2013

Impact protection helmets for young children

74.

EN 1082-1:1996

Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 1: Chain mail gloves and arm guards

75.

EN 1082-2:2000

Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 2: Gloves and arm guards made of material other than chain mail

76.

EN 1146:2005

Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape – Requirements, testing, marking

77.

EN 1149-5:2018

Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements

78.

EN 1385:2012

Helmets for canoeing and white water sports

79.

EN 1486:2007

Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting

80.

EN 1497:2007

Personal fall protection equipment – Rescue harnesses

81.

EN 1827:1999+A1:2009

Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, testing, marking

82.

EN 1891:1998

Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes

83.

EN 1938:2010

Personal eye protection – Goggles for motorcycle and moped users

84.

EN ISO 10819:2013

Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)

EN ISO 10819:2013/A1:2019

85.

EN ISO 10862:2009

Small craft – Quick release system for trapeze harness (ISO 10862:2009)

86.

EN ISO 11393-2:2019

Protective clothing for users of hand-held chainsaws – Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018)

87.

EN ISO 11393-4:2019

Protective clothing for users of hand-held chainsaws – Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018)

88.

EN ISO 11393-5:2019

Protective clothing for users of hand-held chainsaws – Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018)

89.

EN ISO 11393-6:2019

Protective clothing for users of hand-held chainsaws – Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018)

90.

EN 12021:2014

Respiratory equipment – Compressed gases for breathing apparatus

91.

EN 12083:1998

Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, marking

EN 12083:1998/AC:2000

92.

EN 12270:2013

Mountaineering equipment – Chocks – Safety requirements and test methods

93.

EN 12275:2013

Mountaineering equipment – Connectors – Safety requirements and test methods

94.

EN 12276:2013

Mountaineering equipment – Frictional anchors – Safety requirements and test methods

95.

EN 12277:2015+A1:2018

Mountaineering equipment – Harnesses – Safety requirements and test methods

96.

EN 12278:2007

Mountaineering equipment – Pulleys – Safety requirements and test methods

97.

EN ISO 12312-1:2013

Eye and face protection – Sunglasses and related eyewear – Part 1: Sunglasses for general use (ISO 12312-1:2013)

EN ISO 12312-1:2013/A1:2015

98.

EN ISO 12312-2:2015

Eye and face protection – Sunglasses and related eyewear – Part 2: Filters for direct observation of the sun (ISO 12312-2:2015)

99.

EN ISO 12401:2009

Small craft – Deck safety harness and safety line – Safety requirements and test methods (ISO 12401:2009)

100.

EN ISO 12402-2:2020

Personal flotation devices – Part 2: Lifejackets, performance level 275 – Safety requirements (ISO 12402-2:2020)

Notice:

Application of clause 5.6 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425.

Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425.

Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425.

101.

EN ISO 12402-3:2020

Personal flotation devices – Part 3: Lifejackets, performance level 150 – Safety requirements (ISO 12402-3:2020)

Notice:

Application of clause 5.6 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425.

Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425.

Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425.

102.

EN ISO 12402-4:2020

Personal flotation devices – Part 4: Lifejackets, performance level 100 – Safety requirements (ISO 12402-4:2020)

Notice:

Application of clause 5.6 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425.

Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425.

Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425.

103.

EN ISO 12402-5:2020

Personal flotation devices – Part 5: Buoyancy aids (level 50) – Safety requirements (ISO 12402-5:2020)

104.

EN ISO 12402-6:2020

Personal flotation devices – Part 6: Special application lifejackets and buoyancy aids – Safety requirements and additional test methods (ISO 12402-6:2020)

105.

EN ISO 12402-8:2020

Personal flotation devices – Part 8: Accessories – Safety requirements and test methods (ISO 12402-8:2020)

106.

EN 12477:2001

Protective gloves for welders

EN 12477:2001/A1:2005

107.

EN 12492:2012

Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods

108.

EN 12841:2006

Personal fall protection equipment – Rope access systems – Rope adjustment devices

109.

EN 12941:1998

Respiratory protective devices – Powered filtering devices incorporating a helmet or a hood – Requirements, testing, marking

EN 12941:1998/A1:2003

EN 12941:1998/A2:2008

110.

EN 12942:1998

Respiratory protective devices – Power assisted filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking

EN 12942:1998/A1:2002

EN 12942:1998/A2:2008

111.

EN 13034:2005+A1:2009

Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)

112.

EN 13061:2009

Protective clothing – Shin guards for association football players – Requirements and test methods

113.

EN 13138-1:2021

Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be worn

EN 13138-1:2021/AC:2022

114.

EN 13158:2018

Protective clothing – Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers – Requirements and test methods

115.

EN 13178:2000

Personal eye-protection – Eye protectors for snowmobile users

116.

EN 13277-1:2000

Protective equipment for martial arts – Part 1: General requirements and test methods

117.

EN 13277-2:2000

Protective equipment for martial arts – Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors

118.

EN 13277-3:2013

Protective equipment for martial arts – Part 3: Additional requirements and test methods for trunk protectors

119.

EN 13277-4:2001

Protective equipment for martial arts – Part 4: Additional requirements and test methods for head protectors

EN 13277-4:2001/A1:2007

120.

EN 13277-5:2002

Protective equipment for martial arts – Part 5: Additional requirements and test methods for genital protectors and abdominal protectors

121.

EN 13277-6:2003

Protective equipment for martial arts – Part 6: Additional requirements and test methods for breast protectors for females

122.

EN 13277-7:2009

Protective equipment for martial arts – Part 7: Additional requirements and test methods for hand and foot protectors

123.

EN 13277-8:2017

Protective equipment for martial arts – Part 8: Additional requirements and test methods for karate face protectors

124.

EN 13484:2012

Helmets for users of luges

125.

EN 13546:2002+A1:2007

Protective clothing – Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players – Requirements and test methods

126.

EN 13567:2002+A1:2007

Protective clothing – Hand, arm, chest, abdomen, leg, genital and face protectors for fencers – Requirements and test methods

127.

EN 13594:2015

Protective gloves for motorcycle riders – Requirements and test methods

128.

EN 13634:2017

Protective footwear for motorcycle riders – Requirements and test methods

129.

EN ISO 13688:2013

Protective clothing – General requirements (ISO 13688:2013)

EN ISO 13688:2013/A1:2021

130.

EN 13781:2012

Protective helmets for drivers and passengers of snowmobiles and bobsleighs

131.

EN 13794:2002

Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, testing, marking

132.

EN 13832-2:2018

Footwear protecting against chemicals – Part 2: Requirements for limited contact with chemicals

133.

EN 13832-3:2018

Footwear protecting against chemicals – Part 3: Requirements for prolonged contact with chemicals

134.

EN 13949:2003

Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, testing, marking

135.

EN ISO 13982-1:2004

Protective clothing for use against solid particulates – Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)

EN ISO 13982-1:2004/A1:2010

136.

EN ISO 13998:2003

Protective clothing – Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003)

137.

EN 14021:2003

Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods

138.

EN 14052:2012+A1:2012

High performance industrial helmets

139.

EN 14058:2017

Protective clothing – Garments for protection against cool environments

140.

EN 14120:2003+A1:2007

Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods

141.

EN 14126:2003

Protective clothing – Performance requirements and tests methods for protective clothing against infective agents

EN 14126:2003/AC:2004

142.

EN 14143:2013

Respiratory equipment – Self-contained re-breathing diving apparatus

143.

EN 14225-1:2017

Diving suits – Part 1: Wet suits – Requirements and test methods

144.

EN 14225-2:2017

Diving suits – Part 2: Dry suits – Requirements and test methods

145.

EN 14225-3:2017

Diving suits – Part 3: Actively heated or cooled suit systems and components – Requirements and test methods

146.

EN 14328:2005

Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods

147.

EN 14387:2004+A1:2008

Respiratory protective devices – Gas filter(s) and combined filter(s) – Requirements, testing, marking

148.

EN 14435:2004

Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, testing, marking

149.

EN 14458:2018

Personal eye-equipment – High performance visors intended only for use with protective helmets

150.

EN ISO 14460:1999

Protective clothing for automobile racing drivers – Protection against heat and flame – Performance requirements and test methods (ISO 14460:1999)

EN ISO 14460:1999/AC:1999

EN ISO 14460:1999/A1:2002

151.

EN 14529:2005

Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only

152.

EN 14593-1:2005

Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, testing, marking

153.

EN 14594:2018

Respiratory protective devices – Continuous flow compressed air line breathing devices – Requirements, testing and marking

154.

EN 14605:2005+A1:2009

Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])

155.

EN ISO 14877:2002

Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002)

156.

EN ISO 15027-1:2012

Immersion suits – Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)

157.

EN ISO 15027-2:2012

Immersion suits – Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)

158.

EN 15090:2012

Footwear for firefighters

159.

EN 15151-1:2012

Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods

160.

EN 15333-1:2008

Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatus

EN 15333-1:2008/AC:2009

161.

EN 15333-2:2009

Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 2: Free flow apparatus

162.

EN 15613:2008

Knee and elbow protectors for indoor sports – Safety requirements and test methods

163.

EN 16027:2011

Protective clothing – Gloves with protective effect for association football goal keepers

164.

EN ISO 16321-1:2022

Eye and face protection for occupational use – Part 1: General requirements (ISO 16321-1:2021)

165.

EN ISO 16321-2:2021

Eye and face protection for occupational use – Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)

Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead.

166.

EN ISO 16321-3:2022

Eye and face protection for occupational use – Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)

Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead.

167.

EN 16350:2014

Protective gloves – Electrostatic properties

168.

EN 16473:2014

Firefighters helmets – Helmets for technical rescue

169.

EN 16716:2017

Mountaineering equipment – Avalanche airbag systems – Safety requirements and test methods

170.

EN 17092-2:2020

Protective garments for motorcycle riders – Part 2: Class AAA garments – Requirements

171.

EN 17092-3:2020

Protective garments for motorcycle riders – Part 3: Class AA garments – Requirements

172.

EN 17092-4:2020

Protective garments for motorcycle riders – Part 4: Class A garments – Requirements

173.

EN 17092-5:2020

Protective garments for motorcycle riders – Part 5: Class B garments – Requirements

174.

EN 17092-6:2020

Protective garments for motorcycle riders – Part 6: Class C garments – Requirements

175.

EN 17109:2020

Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods

176.

EN ISO 17249:2013

Safety footwear with resistance to chain saw cutting (ISO 17249:2013)

EN ISO 17249:2013/AC:2014

177.

EN 17353:2020

Protective clothing – Enhanced visibility equipment for medium risk situations – Test methods and requirements

178.

EN 17520:2021

Mountaineering equipment – Personal belay lanyards – Safety requirements and test methods

179.

EN ISO 18527-1:2022

Eye and face protection for sports use – Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)

180.

EN ISO 18527-2:2021

Eye and face protection for sports use – Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021)

181.

EN ISO 20320:2020

Protective clothing for use in Snowboarding – Wrist Protectors – Requirements and test methods (ISO 20320:2020)

182.

EN ISO 20345:2022

Personal protective equipment – Safety footwear (ISO 20345:2021)

183.

EN ISO 20346:2014

Personal protective equipment – Protective footwear (ISO 20346:2014)

184.

EN ISO 20347:2012

Personal protective equipment – Occupational footwear (ISO 20347:2012)

185.

EN ISO 20349-1:2017

Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)

EN ISO 20349-1:2017/A1:2020

186.

EN ISO 20349-2:2017

Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)

EN ISO 20349-2:2017/A1:2020

187.

EN ISO 20471:2013

High visibility clothing – Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01)

EN ISO 20471:2013/A1:2016

188.

EN ISO 27065:2017

Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017)

EN ISO 27065:2017/A1:2019

189.

EN 50321-1:2018

Live working – Footwear for electrical protection – Insulating footwear and overboots

EN 50321-1:2018/AC:2018-08

190.

EN 61482-2:2020

Live working – Protective clothing against the thermal hazards of an electric arc – Part 2: Requirements (IEC 61482-2:2018, Modified)


ANNEX II

No

Reference of the standard

Date of withdrawal

1

EN 143:2000

Respiratory protective devices – Particle filters – Requirements, testing, marking

EN 143:2000/AC:2005

EN 143:2000/A1:2006

9.6.2024

2

EN 166:2001

Personal eye-protection – Specifications

11.11.2024

3

EN 169:2002

Personal eye-protection – Filters for welding and related techniques – Transmittance requirements and recommended use

11.11.2024

4

EN 170:2002

Personal eye-protection – Ultraviolet filters – Transmittance requirements and recommended use

11.11.2024

5

EN 172:1994

Personal eye protection – Sunglare filters for industrial use

EN 172:1994/A1:2000

EN 172:1994/A2:2001

11.11.2024

6

EN 174:2001

Personal eye-protection – Ski goggles for downhill skiing

11.11.2024

7

EN 352-1:2002

Hearing protectors – General requirements – Part 1: Ear-Muffs

21.7.2024

8

EN 352-2:2002

Hearing protectors – General requirements – Part 2: Ear-plugs

21.7.2024

9

EN 352-3:2002

Hearing protectors – General requirements – Part 3: Ear-muffs attached to an industrial safety helmet

21.7.2024

10

EN 352-4:2001

Hearing protectors – Safety requirements and testing – Part 4: Level-dependent ear-muffs

EN 352-4:2001/A1:2005

21.7.2024

11

EN 352-5:2002

Hearing protectors – Safety requirements and testing – Part 5: Active noise reduction ear-muffs

EN 352-5:2002/A1:2005

21.7.2024

12

EN 352-6:2002

Hearing protectors – Safety requirements and testing – Part 6: Ear-muffs with electrical audio input

21.7.2024

13

EN 352-7:2002

Hearing protectors – Safety requirements and testing – Part 7: Level-dependent ear-plugs

21.7.2024

14

EN 352-8:2008

Hearing protectors – Safety requirements and testing – Part 8: Entertainment audio ear-muffs

21.7.2024

15

EN 379:2003+A1:2009

Personal eye-protection – Automatic welding filters

11.11.2024

16

EN 1731:2006

Personal eye protection – Mesh eye and face protectors

11.11.2024

17

EN ISO 13688:2013

Protective clothing – General requirements (ISO 13688:2013)

9.6.2024

18

EN ISO 20345:2011

Personal protective equipment – Safety footwear (ISO 20345:2011)

11.11.2024


Top