This document is an excerpt from the EUR-Lex website
Document 32022D0866
Commission Implementing Decision (EU) 2022/866 of 25 May 2022 on the unresolved objections regarding the conditions for granting an authorisation for the biocidal product Primer PIP in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (notified under document C(2022) 3318) (Text with EEA relevance)
Commission Implementing Decision (EU) 2022/866 of 25 May 2022 on the unresolved objections regarding the conditions for granting an authorisation for the biocidal product Primer PIP in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (notified under document C(2022) 3318) (Text with EEA relevance)
Commission Implementing Decision (EU) 2022/866 of 25 May 2022 on the unresolved objections regarding the conditions for granting an authorisation for the biocidal product Primer PIP in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (notified under document C(2022) 3318) (Text with EEA relevance)
C/2022/3318
OJ L 151, 2.6.2022, p. 68–71
(BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
In force
2.6.2022 |
EN |
Official Journal of the European Union |
L 151/68 |
COMMISSION IMPLEMENTING DECISION (EU) 2022/866
of 25 May 2022
on the unresolved objections regarding the conditions for granting an authorisation for the biocidal product Primer PIP in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council
(notified under document C(2022) 3318)
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products (1), and in particular Article 36(3) thereof,
Whereas:
(1) |
On 11 March 2016, the company Lanxess Deutschland GmbH (‘the applicant’) submitted an application to France for the mutual recognition in parallel in accordance with Article 34 of Regulation (EU) No 528/2012 of the biocidal product Primer PIP (‘the biocidal product’). The biocidal product is a wood preservative of product-type 8 to be used for the preventive treatment against wood discolouring fungi, wood destroying basidiomycetes and wood boring beetles (larvae). The biocidal product is applied by manual dipping, automated dipping or automated spraying and contains as active substances propiconazole, IPBC and permethrin. Germany is the reference Member State responsible for the evaluation of the application as referred to in Article 34(1) of Regulation (EU) No 528/2012. |
(2) |
On 9 March 2020, pursuant to Article 35(2) of Regulation (EU) No 528/2012, France referred objections to the coordination group, indicating that the conditions of the authorisation set by Germany do not ensure that the biocidal product meets the requirement laid down in Article 19(1), point (b)(iii), of that Regulation. France considers that in order to ensure the safe handling of the biocidal product, wearing of personal protective equipment, consisting of protective chemical resistant gloves meeting the requirements of the European Standard EN 374 (glove material to be specified by the authorisation holder within the product information) and coverall of at least type-6 as specified in European Standard EN 13034, is required for application by manual dipping and automated spraying, wearing of personal protective equipment consisting of protective chemical resistant gloves meeting the requirements of the European Standard EN 374 (glove material to be specified by the authorisation holder within the product information) is required for application by automated dipping, and wearing of chemical resistant gloves meeting the requirements of the European Standard EN 374 is required for subsequent manual processing of the freshly treated timber. According to France, the application of technical and organisational measures in accordance with Council Directive 98/24/EC (2) as a possible replacement for wearing personal protective equipment does not ensure an adequate protection if those measures are not specified and evaluated in the assessment of the biocidal product. |
(3) |
Germany considers that Directive 98/24/EC establishes the order of preference of different risk mitigation measures for protection of workers and prioritises the application of technical and organisational measures over wearing personal protection equipment for the use of the biocidal product. According to Germany, pursuant to that Directive the employer is to decide which technical and organisational measures are to be applied, and as there is a broad range of such measures, it is not feasible to describe and evaluate the measures in the authorisation of the biocidal product. |
(4) |
As no agreement was reached by the coordination group, on 28 October 2020 Germany referred the unresolved objection to the Commission pursuant to Article 36(1) of Regulation (EU) No 528/2012. It thereby provided the Commission with a detailed statement of the matter on which Member States were unable to reach agreement and the reasons for their disagreement. That statement was forwarded to the Member States concerned and the applicant. |
(5) |
Article 2(3), points (b) and (c), of Regulation (EU) No 528/2012 provides that that Regulation is to be without prejudice to Council Directive 89/391/EEC (3) and Directive 98/24/EC. |
(6) |
Article 19(1), point (b)(iii), of Regulation (EU) No 528/2012 indicates as one of the criteria for granting an authorisation that the biocidal product has no unacceptable effects itself, or as a result of its residues, on the health of humans. |
(7) |
Point 9 of Annex VI to Regulation (EU) No 528/2012 states that the application of the common principles laid down in that Annex for the evaluation of dossiers for biocidal products referred to in Article 19(1), point (b), of that Regulation, when taken together with the other conditions set out in its Article 19, is to lead to the competent authorities or the Commission deciding whether or not a biocidal product is to be authorised. Such authorisation may include restrictions on the use of the biocidal product or other conditions. |
(8) |
Point 18(d) of Annex VI to Regulation (EU) No 528/2012 states that the risk assessment conducted for the product is to determine the measures necessary to protect humans, animals and the environment, both during the proposed normal use of the biocidal product and in a realistic worst-case situation. |
(9) |
Point 56(2) of Annex VI to Regulation (EU) No 528/2012 indicates that in establishing compliance with the criteria set out in Article 19(1), point (b), of that Regulation, one of the conclusions to which the evaluating body is to make, is that subject to specific conditions/restrictions the biocidal product can comply with the criteria. |
(10) |
Point 62 of Annex VI to Regulation (EU) No 528/2012 states that the evaluating body is, where appropriate, to conclude that the criterion under Article 19(1), point (b)(iii), of that Regulation can only be complied with by application of prevention and protection measures including the design of work processes, engineering controls, use of adequate equipment and materials, application of collective protection measures and, where exposure cannot be prevented by other means, application of individual protection measures including the wearing of personal protective equipment such as respirators, breathing-masks, overalls, gloves and goggles, in order to reduce exposure for professional operators. |
(11) |
However, point 62 of Annex VI to Regulation (EU) No 528/2012 does not provide that the assessment leading to the conclusion that the criterion under Article 19(1), point (b)(iii), of that Regulation can only be complied with by application of prevention and protection measures is to be done in accordance with Directive 98/24/EC. It also does not explicitly provide that that Directive would not apply. Therefore, it should not be inferred from those provisions that Directive 98/24/EC does not apply. In addition, the relevant obligations under Directive 98/24/EC are imposed on employers, not on the authorities of Member States. |
(12) |
Article 4 of Directive 98/24/EC provides that for the assessment of any risk to the safety and health of workers arising from the presence of chemical agents, employers are to obtain additional information needed from the supplier or from other readily available sources and that where appropriate, that information is to comprise the specific assessment concerning the risk to users established on the basis of Union legislation on chemical agents. |
(13) |
Article 6 of Directive 98/24/EC lays down prioritisation of the measures to be taken by the employer for the protection of workers from the risks related to chemical agents at work. Priority is to be given to replacement of the hazardous substance and when this is not possible, the risk from a hazardous chemical agent to the safety and health of workers at work needs to be reduced to a minimum by application of protection and prevention measures. If it is not possible to prevent exposure to the hazardous substance by other means, protection of the workers is to be ensured by applying individual protection measures including personal protective equipment. |
(14) |
Taking into account the methods of application of the biocidal product and the available information from the evaluating body, no such technical or organisational measures have been identified in the application for authorisation of the biocidal product, nor during the evaluation of that application. |
(15) |
The Commission therefore considers that the biocidal product meets the criterion laid down in Article 19(1), point (b)(iii), of Regulation (EU) No 528/2012, provided that the following condition regarding its use is included in the authorisation and on the label of the biocidal product: ‘The wearing of protective chemical resistant gloves meeting the requirements of the European Standard EN 374 (glove material to be specified by the authorisation holder within the product information) and coverall of at least type 6 as specified in the European Standard EN 13034 is required for application by manual dipping and automated spraying, wearing of protective chemical resistant gloves meeting the requirements of the European Standard EN 374 (glove material to be specified by the authorisation holder within the product information) is required for application by automated dipping, and wearing of chemical resistant gloves meeting the requirements of European Standard EN 374 (glove material to be specified by the authorisation holder within the product information) is required for subsequent manual processing of the freshly treated timber. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work’. |
(16) |
However, if the applicant for authorisation identifies effective technical or organisational measures and the authorising authority agrees that such measures lead to an equivalent or higher level of exposure reduction, or the authorising authority itself identifies measures leading to an equivalent or higher level of exposure reduction, those measures should replace the wearing of personal protective equipment and should be specified in the authorisation and on the label of the biocidal product. |
(17) |
On 15 February 2021, the Commission provided the applicant with the opportunity to provide written comments in accordance with Article 36(2) of Regulation (EU) No 528/2012. The applicant did not provide comments. |
(18) |
The measures provided for in this Decision are in accordance with the opinion of the Standing Committee on Biocidal Products, |
HAS ADOPTED THIS DECISION:
Article 1
The biocidal product identified by the case number BC-XP022475-16 in the Register for Biocidal Products meets the condition laid down in Article 19(1), point (b)(iii), of Regulation (EU) No 528/2012 provided that the following condition regarding its use is included in the authorisation and on the label of the biocidal product: ‘The wearing of protective chemical resistant gloves meeting the requirements of the European Standard EN 374 (glove material to be specified by the authorisation holder within the product information) and coverall of at least type 6 as specified in European Standard EN 13034 is required for application by manual dipping and automated spraying, wearing of protective chemical resistant gloves meeting the requirements of the European Standard EN 374 (glove material to be specified by the authorisation holder within the product information) is required for application by automated dipping, and wearing of chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) meeting the requirements of European Standard EN 374 is required for subsequent manual processing of the freshly treated timber. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work.’
However, where the applicant for authorisation identifies technical or organisational measures and the authorising authority agrees that such measures achieve a level of exposure reduction equivalent to or higher than the reduction achieved by wearing the protective equipment referred to in the first paragraph, or the authorising authority itself identifies such measures leading to an equivalent or higher level of exposure reduction than the reduction achieved by wearing the protective equipment referred to in the first paragraph, those measures shall be used instead of that personal protective equipment and shall be specified in the authorisation and on the label of the biocidal product. In that case the obligation to include the condition regarding the use of the biocidal product laid down in the first paragraph shall not apply.
Article 2
This Decision is addressed to the Member States.
Done at Brussels, 25 May 2022.
For the Commission
Stella KYRIAKIDES
Member of the Commission
(1) OJ L 167, 27.6.2012, p. 1.
(2) Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).
(3) Council Directive 89/391/EEC of 12 June 1989 on the introduction of measures to encourage improvements in the safety and health of workers at work (OJ L 183, 29.6.1989, p. 1).