This document is an excerpt from the EUR-Lex website
Document 02019D0919-20210202
Commission Implementing Decision (EU) 2019/919 of 4 June 2019 on the harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU of the European Parliament and of the Council
Consolidated text: Commission Implementing Decision (EU) 2019/919 of 4 June 2019 on the harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU of the European Parliament and of the Council
Commission Implementing Decision (EU) 2019/919 of 4 June 2019 on the harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU of the European Parliament and of the Council
02019D0919 — EN — 02.02.2021 — 002.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
|
COMMISSION IMPLEMENTING DECISION (EU) 2019/919 of 4 June 2019 (OJ L 146 5.6.2019, p. 106) |
Amended by:
|
|
|
Official Journal |
||
|
No |
page |
date |
||
|
COMMISSION IMPLEMENTING DECISION (EU) 2020/50 of 21 January 2020 |
L 17 |
3 |
22.1.2020 |
|
|
COMMISSION IMPLEMENTING DECISION (EU) 2021/117 of 1 February 2021 |
L 36 |
39 |
2.2.2021 |
|
COMMISSION IMPLEMENTING DECISION (EU) 2019/919
of 4 June 2019
on the harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU of the European Parliament and of the Council
Article 1
The references to harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.
Article 2
The references to harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union.
Article 3
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX I
|
No |
Reference of the standard |
|
1. |
EN ISO 6185-1:2018 |
|
|
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) |
|
2. |
EN ISO 6185-2:2018 |
|
|
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) |
|
3. |
EN ISO 6185-3:2018 |
|
|
Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
|
4. |
EN ISO 6185-4:2018 |
|
|
Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
|
5. |
EN ISO 7840:2018 |
|
|
Small craft - Fire-resistant fuel hoses (ISO 7840:2013) |
|
6. |
EN ISO 8469:2018 |
|
|
Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) |
|
7. |
EN ISO 8666:2018 |
|
|
Small craft - Principal data (ISO 8666:2016) |
|
8. |
EN ISO 8849:2018 |
|
|
Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003) |
|
9. |
EN ISO 9093-1:2018 |
|
|
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994) |
|
10. |
EN ISO 9093-2:2018 |
|
|
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
|
11. |
EN ISO 11192:2018 |
|
|
Small craft - Graphical symbols (ISO 11192:2005) |
|
12. |
EN ISO 11547:2018 |
|
|
Small craft - Start-in-gear protection (ISO 11547:1994) |
|
13. |
EN ISO 11812:2018 |
|
|
Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
|
14. |
EN ISO 12215-1:2018 |
|
|
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
|
15. |
EN ISO 12215-2:2018 |
|
|
Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
|
16. |
EN ISO 12215-3:2018 |
|
|
Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
|
17. |
EN ISO 12215-4:2018 |
|
|
Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
|
18. |
EN ISO 12215-5:2018 |
|
|
Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008, including Amd 1:2014) |
|
19. |
EN ISO 12215-6:2018 |
|
|
Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008) |
|
20. |
EN ISO 12215-8:2018 |
|
|
Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009, including Cor 1:2010) |
|
21. |
EN ISO 12215-9:2018 |
|
|
Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
|
22. |
EN ISO 12216:2018 |
|
|
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002) |
|
23. |
EN ISO 13297:2018 |
|
|
Small craft - Electrical systems - Alternating current installations (ISO 13297:2014) |
|
24. |
EN ISO 13590:2018 |
|
|
Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003) |
|
25. |
EN ISO 14509-1:2018 |
|
|
Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008) |
|
26. |
EN ISO 14509-3:2018 |
|
|
Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009) |
|
27. |
EN ISO 15083:2018 |
|
|
Small craft - Bilge-pumping systems (ISO 15083:2003) |
|
28. |
EN ISO 15084:2018 |
|
|
Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003) |
|
29. |
EN ISO 16180:2018 |
|
|
Small craft - Navigation lights - Installation, placement and visibility (ISO 16180:2013) |
|
30. |
EN ISO 21487:2018 |
|
|
Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012, including Amd 1:2014 and Amd 2:2015) |
|
31. |
EN ISO 25197:2018 |
|
|
Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012, including Amd 1:2014) |
|
32. |
EN ISO 10087:2019 |
|
|
Small craft - Craft identification - Coding system |
|
33. |
EN ISO 12215-5:2019 |
|
|
Small craft - Hull construction and scantlings, Part 5: Design pressures for monohulls, design stresses and scantlings determination |
|
34. |
EN ISO 11105:2020 |
|
|
Small craft – Ventilation of petrol engine and/or petrol tank compartments |
ANNEX II
|
No |
Reference of the standard |
|
1. |
EN ISO 6185-1:2001 |
|
|
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) |
|
2. |
EN ISO 6185-2:2001 |
|
|
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) |
|
3. |
EN ISO 6185-3:2014 |
|
|
Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
|
4. |
EN ISO 6185-4:2011 |
|
|
Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
|
5. |
EN ISO 7840:2013 |
|
|
Small craft - Fire-resistant fuel hoses (ISO 7840:2013) |
|
6. |
EN ISO 8469:2013 |
|
|
Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) |
|
7. |
EN ISO 8849:2003 |
|
|
Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003) |
|
8. |
EN ISO 9093-1:1997 |
|
|
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994) |
|
9. |
EN ISO 9093-2:2002 |
|
|
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
|
10. |
EN ISO 11192:2005 |
|
|
Small craft - Graphical symbols (ISO 11192:2005) |
|
11. |
EN ISO 11547:1995 |
|
|
Small craft - Start-in-gear protection (ISO 11547:1994) |
|
|
EN ISO 11547:1995/A1:2000 |
|
12. |
EN ISO 11812:2001 |
|
|
Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
|
13. |
EN ISO 12215-1:2000 |
|
|
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
|
14. |
EN ISO 12215-2:2002 |
|
|
Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
|
15. |
EN ISO 12215-3:2002 |
|
|
Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
|
16. |
EN ISO 12215-4:2002 |
|
|
Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
|
17. |
EN ISO 12215-5:2008 |
|
|
Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
|
|
EN ISO 12215-5:2008/A1:2014 |
|
18. |
EN ISO 12215-6:2008 |
|
|
Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008) |
|
19. |
EN ISO 12215-8:2009 |
|
|
Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009) |
|
|
EN ISO 12215-8:2009/AC:2010 |
|
20. |
EN ISO 12215-9:2012 |
|
|
Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
|
21. |
EN ISO 12216:2002 |
|
|
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002) |
|
22. |
EN ISO 13297:2014 |
|
|
Small craft - Electrical systems - Alternating current installations (ISO 13297:2014) |
|
23. |
EN ISO 13590:2003 |
|
|
Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003) |
|
|
EN ISO 13590:2003/AC:2004 |
|
24. |
EN ISO 14509-1:2008 |
|
|
Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008) |
|
25. |
EN ISO 14509-3:2009 |
|
|
Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009) |
|
26. |
EN ISO 15083:2003 |
|
|
Small craft - Bilge-pumping systems (ISO 15083:2003) |
|
27. |
EN ISO 15084:2003 |
|
|
Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003) |
|
28. |
EN ISO 16180:2013 |
|
|
Small craft - Navigation lights - Installation, placement and visibility (ISO 16180:2013) |
|
29. |
EN ISO 21487:2012 |
|
|
Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012) |
|
|
EN ISO 21487:2012/A1:2014 |
|
|
EN ISO 21487:2012/A2:2015 |
|
30. |
EN ISO 25197:2012 |
|
|
Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012) |
|
|
EN ISO 25197:2012/A1:2014 |
|
31. |
EN ISO 9097:2017 Small craft – Electric fans |