Back to EUR-Lex homepage

EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search
You are here

Document 32019D0235R(01)

Corrigendum to Commission Implementing Decision (EU) 2019/235 of 24 January 2019 on amending Decision 2008/411/EC as regards an update of relevant technical conditions applicable to the 3400-3800 MHz frequency band (OJ L 37, 8.2.2019)

OJ L 92, 1.4.2019, p. 11–11 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

ELI: http://data.europa.eu/eli/dec_impl/2019/235/corrigendum/2019-04-01/oj

1.4.2019   

EN

Official Journal of the European Union

L 92/11

Corrigendum to Commission Implementing Decision (EU) 2019/235 of 24 January 2019 on amending Decision 2008/411/EC as regards an update of relevant technical conditions applicable to the 3 400-3 800 MHz frequency band

( Official Journal of the European Union L 37 of 8 February 2019 )

On page 138, in the Annex, section A ‘Definitions’, the fifth paragraph:

for:

‘

Image 1

where P(θ, φ) is the power radiated by an antenna array system in direction (θ, φ) given by the formula:

P(θ, φ) = PTxg(θ, φ)

where PTx denotes the conducted power (measured in Watts), which is input to the array system, and g(θ, φ) denotes the array systems directional gain along the (θ, φ) direction.’,

read:

‘

Image 2

where P(

Image 3
, φ) is the power radiated by an antenna array system in direction (
Image 4
, φ) given by the formula:

P(

Image 5
, φ) = PTxg(
Image 6
, φ)

where PTx denotes the conducted power (measured in Watts), which is input to the array system, and g(

Image 7
, φ) denotes the array systems directional gain along the (
Image 8
, φ) direction.’.

On page 139, the fourth paragraph:

for:

‘In Tables 3, 4, and 7 the power limits are determined relative to a fixed upper limit by means of the formula Min(P Max — A , B), which sets the lower (or stricter) of two values: (1) (P Max A) expressing the maximum carrier power P Max minus a relative offset A, and (2) the fixed upper limit B.’,

read:

‘In Tables 3, 4, and 7 the power limits are determined relative to a fixed upper limit by means of the formula Min(P Max – A, B), which sets the lower (or stricter) of two values: (1) (P Max – A) expressing the maximum carrier power P Max minus a relative offset A, and (2) the fixed upper limit B.’.

Top