This document is an excerpt from the EUR-Lex website
Document 22024D1407
Decision of the EEA joint Committee No 317/2023 of 8 December 2023 amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement [2024/1407]
Decision of the EEA joint Committee No 317/2023 of 8 December 2023 amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement [2024/1407]
Decision of the EEA joint Committee No 317/2023 of 8 December 2023 amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement [2024/1407]
OJ L, 2024/1407, 13.6.2024, ELI: http://data.europa.eu/eli/dec/2024/1407/oj (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
Date of entry into force unknown (pending notification) or not yet in force.
|
Official Journal |
EN L series |
|
2024/1407 |
13.6.2024 |
DECISION OF THE EEA JOINT COMMITTEE No 317/2023
of 8 December 2023
amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement [2024/1407]
THE EEA JOINT COMMITTEE,
Having regard to the Agreement on the European Economic Area (“the EEA Agreement”), and in particular Article 98 thereof,
Whereas:
|
(1) |
Regulation (EU) 2019/1020 of the European Parliament and of the Council of 20 June 2019 on market surveillance and compliance of products and amending Directive 2004/42/EC and Regulations (EC) No 765/2008 and (EU) No 305/2011 (1) is to be incorporated into the EEA Agreement. |
|
(2) |
Commission Implementing Regulation (EU) 2021/1121 of 8 July 2021 specifying the details of the statistical data to be submitted by the Member States as regards controls on products entering the Union market with regard to product safety and compliance (2) is to be incorporated into the EEA Agreement. |
|
(3) |
Commission Implementing Regulation (EU) 2022/1267 of 20 July 2022 specifying the procedures for the designation of Union testing facilities for the purposes of market surveillance and verification of product compliance in accordance with Regulation (EU) 2019/1020 of the European Parliament and of the Council (3) is to be incorporated into the EEA Agreement. |
|
(4) |
Annex II to the EEA Agreement should therefore be amended accordingly, |
HAS ADOPTED THIS DECISION:
Article 1
Annex II to the EEA Agreement shall be amended as follows:
|
1. |
The following indent is added in point 9 (Directive 2004/42/EC of the European Parliament and of the Council) of Chapter XVII:
|
|
2. |
Point 3b (Regulation (EC) No 765/2008 of the European Parliament and of the Council) of Chapter XIX is amended as follows:
|
|
3. |
The following is inserted after point 3ua (Commission Implementing Regulation (EU) 2020/1668) of Chapter XIX:
|
|
4. |
The following indent is added in point 1 (Regulation (EU) No 305/2011 of the European Parliament and of the Council) of Chapter XXI:
|
Article 2
The texts of Regulation (EU) 2019/1020 and Implementing Regulations (EU) 2021/1121 and (EU) 2022/1267 in the Icelandic and Norwegian languages, to be published in the EEA Supplement to the Official Journal of the European Union, shall be authentic.
Article 3
This Decision shall enter into force on 9 December 2023, provided that all the notifications under Article 103(1) of the EEA Agreement have been made (*1).
Article 4
This Decision shall be published in the EEA Section of, and in the EEA Supplement to, the Official Journal of the European Union.
Done at Brussels, 8 December 2023.
For the EEA Joint Committee
The President
Pascal SCHAFHAUSER
(1) OJ L 169, 25.6.2019, p. 1.
(2) OJ L 243, 9.7.2021, p. 37.
(3) OJ L 192, 21.7.2022, p. 21.
(*1) Constitutional requirements indicated.
ELI: http://data.europa.eu/eli/dec/2024/1407/oj
ISSN 1977-0677 (electronic edition)