This document is an excerpt from the EUR-Lex website
Document 01973A0514(01)-20210901
Agreement between the European Economic Community and the Kingdom of Norway
Consolidated text: Agreement between the European Economic Community and the Kingdom of Norway
Agreement between the European Economic Community and the Kingdom of Norway
ELI: http://data.europa.eu/eli/agree_internation/1973/1691/2021-09-01
01973A0514(01) — EN — 01.09.2021 — 004.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
|
AGREEMENT between the European Economic Community and the Kingdom of Norway (OJ L 171 27.6.1973, p. 2) |
Amended by:
Corrected by:
AGREEMENT
between the European Economic Community and the Kingdom of Norway
THE EUROPEAN ECONOMIC COMMUNITY,
of the one part,
and
THE KINGDOM OF NORWAY,
of the other part,
DESIRING to consolidate and to extend, upon the enlargement of the European Economic Community, the economic relations existing between the Community and Norway and to ensure, with due regard for fair conditions of competition, the harmonious development of their commerce for the purpose of contributing to the work of constructing Europe,
RESOLVED to this end to eliminate progressively the obstacles to substantially all their trade, in accordance with the provisions of the General Agreement on Tariffs and Trade concerning the establishment of free trade areas,
DECLARING their readiness to examine, in the light of any relevant factor, and in particular of developments in the Community, the possibility of developing and deepening their relations where it would appear to be useful in the interests of their economies to extend them to fields not covered by this Agreement,
HAVE DECIDED, in pursuit of these objectives and considering that no provision of this Agreement may be interpreted as exempting the Contracting Parties from the obligations which are incumbent upon them under other international agreements,
TO CONCLUDE THIS AGREEMENT:
Article 1
The aim of this Agreement is:
to promote through the expansion of reciprocal trade the harmonious development of economic relations between the European Economic Community and the Kingdom of Norway and thus to foster in the Community and in Norway the advance of economic activity, the improvement of living and employment conditions, and increased productivity and financial stability,
to provide fair conditions of competition for trade between the Contracting Parties,
to contribute in this way, by the removal of barriers to trade, to the harmonious development and expansion of world trade.
Article 2
The Agreement shall apply to products originating in the Community or Norway:
which fall within Chapters 25 to 99 of the Brussels Nomenclature, excluding the products listed in the Annex;
which are specified in Protocol No 2 with due regard to the arrangements provided for in that Protocol.
Article 3
Customs duties on imports shall be progressively abolished in accordance with the following timetable:
on the date of entry into force of the Agreement each duty shall be reduced to 80 % of the basic duty;
four further reductions of 20 % each shall be made on:
Article 4
The Contracting Parties may replace a customs duty of a fiscal nature or the fiscal element of a customs duty by an internal tax.
Article 5
Subject to the application by the Community of Article 39 (5) of the ‘Act concerning the Conditions of Accession and the Adjustments to the Treaties’ as regards the specific duties or the specific part of the mixed duties in the Irish Customs Tariff, Article 3 and Protocols Nos. 1 and 2 shall be applied, with rounding to the fourth decimal place.
Article 6
Any charge having an effect equivalent to a customs duty on imports, the rate of which on 31 December 1972 is higher than that actually applied on 1 January 1972, shall be reduced to the latter rate upon the entry into force of the Agreement.
Charges having an effect equivalent to customs duties on imports shall be progressively abolished in accordance with the following timetable:
by 1 January 1974 at the latest each charge shall be reduced to 60 % of the rate applied on 1 January 1972;
three further reductions of 20 % each shall be made on:
Article 7
Customs duties on exports and charges having equivalent effect shall be abolished not later than 1 January 1974.
Article 8
Protocol No 1 lays down the tariff treatment and arrangements applicable to certain products.
Article 9
Protocol No 2 lays down the tariff treatment and arrangements applicable to certain goods obtained by processing agricultural products.
Article 10
Article 11
Protocol No 3 lays down the rules of origin.
Article 12
A Contracting Party which is considering the reduction of the effective level of its duties or charges having equivalent effect applicable to third countries benefiting from most-favoured-nation treatment, or which is considering the suspension of their application, shall, as far as may be practicable, notify the Joint Committee not less than thirty days before such reduction or suspension comes into effect. It shall take note of any representations by the other Contracting Party regarding any distortions which might result therefrom.
Article 12a
In the event of amendments to the customs tariff nomenclature of one or both of the Contracting Parties for products referred to in the Agreement, the Joint Committee may adapt the tariff nomenclature of those products in the Agreement to conform with such amendments having due regard to the principle that the advantages resulting from the Agreement should be maintained.
Article 13
Article 13a
Article 13b
A Contracting Party which is considering a change in the arrangements which it applies to exports to third countries shall, as far as may be practicable, notify the Joint Committee not less than 30 days before the proposed change comes into effect. It shall take note of any representations by the other Contracting Party regarding any distortions which may result therefrom.
Article 14
In this event the Community shall take due account of the interests of Norway; to this end it shall inform the Joint Committee, which shall meet under the conditions set out in Article 31.
Article 15
Article 16
From 1 July 1977 products originating in Norway may not enjoy more favourable treatment when imported into the Community than that applied by the Member States of the Community between themselves.
Article 17
The Agreement shall not preclude the maintenance or establishment of customs unions, free-trade areas or arrangements for frontier trade, except in so far as they alter the trade arrangements provided for in the Agreement, in particular the provisions concerning rules of origin.
Article 18
The Contracting Parties shall refrain from any measure or practice of an internal fiscal nature establishing, whether directly or indirectly, discrimination between the products of one Contracting Party and like products originating in the territory of the other Contracting Party.
Products exported to the territory of one of the Contracting Parties may not benefit from repayment of internal taxation in excess of the amount of direct or indirect taxation imposed on them.
Article 19
Payments relating to trade in goods and the transfer of such payments to the Member State of the Community in which the creditor is resident, or to Norway, shall be free from any restrictions.
The Contracting Parties shall refrain from any exchange or administrative restrictions on the grant, repayment or acceptance of short and medium-term credits covering commercial transactions in which a resident participates.
Article 20
The Agreement shall not preclude prohibitions or restrictions on imports, exports or goods in transit justified on grounds of public morality, law and order or public security, the protection of life and health of humans, animals or plants, the protection of national treasures of artistic, historic or archaeological value, the protection of industrial and commercial property, or rules relating to gold or silver. Such prohibitions or restrictions must not, however, constitute a means of arbitrary discrimination or a disguised restriction on trade between the Contracting Parties.
Article 21
Nothing in the Agreement shall prevent a Contracting Party from taking any measures:
which it considers necessary to prevent the disclosure of information contrary to its essential security interests;
which relate to trade in arms, munitions or war materials or to research, development or production indispensable for defence purposes, provided that such measures do not impair the conditions of competition in respect of products not intended for specifically military purposes;
which it considers essential to its own security in time of war or serious international tension.
Article 22
If either Contracting Party considers that the other Contracting Party has failed to fulfill an obligation under the Agreement, it may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 27.
Article 23
The following are incompatible with the proper functioning of the Agreement in so far as they may affect trade between the Community and Norway:
all agreements between undertakings, decisions by associations of undertakings and concerted practices between undertakings which have as their object or effect the prevention, restriction or distortion of competition as regards the production of or trade in goods;
abuse by one or more undertakings of a dominant position in the territories of the Contracting Parties as a whole or in a substantial part thereof;
any public aid which distorts or threatens to distort competition by favouring certain undertakings on the production of certain goods.
Article 24
Where an increase in imports of a given product is, or is likely, to be seriously detrimental to any production activity carried on in the territory of one of the Contracting Parties and where this increase is due to:
the partial or total reduction in the importing Contracting Party, as provided for in the Agreement, of customs duties and charges having equivalent effect levied on the product in question; and
the fact that the duties or charges having equivalent effect levied by the exporting Contracting Party on imports of raw materials or intermediate products used in the manufacture of the product in question are significantly lower than the corresponding duties or charges levied by the importing Contracting Party;
the Contracting Party concerned may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 27.
Article 24a
Where compliance with the provisions of Articles 7 and 13a leads to
re-export towards a third country against which the exporting Contracting Party maintains, for the product concerned quantitative export restrictions, export duties or measures or charges having equivalent effect; or
a serious shortage, or threat thereof, of a product essential to the exporting Contracting Party,
and where the situations referred to above give rise or are likely to give rise to major difficulties for the exporting Contracting Party, that Contracting Party may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 27.
Article 25
If one of the Contracting Parties finds that dumping is taking place in trade with the other Contracting Party, it may take appropriate measures against this practice in accordance with the Agreement on Implementation of Article VI of the General Agreement on Tariffs and Trade, under the conditions and in accordance with the procedures laid down in Article 27.
Article 26
If serious disturbances arise in any sector of the economy or if difficulties arise which could bring about serious deterioration in the economic situation of a region, the Contracting Party concerned may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 27.
Article 27
The safeguard measures shall be notified immediately to the Joint Committee and shall be the subject of periodical consultations within the Committee, particularly with a view to their abolition as soon as circumstances permit.
For the implementation of paragraph 2, the following provisions shall apply:
As regards Article 23, either Contracting Party may refer the matter to the Joint Committee if it considers that a given practice is incompatible with the proper functioning of the Agreement within the meaning of Article 23 (1).
The Contracting Parties shall provide the Joint Committee with all relevant information and shall give it the assistance it requires in order to examine the case and, where appropriate, to eliminate the practice objected to.
If the Contracting Party in question fails to put an end to the practice objected to within the period fixed by the Joint Committee, or in the absence of agreement in the Joint Committee within three months of the matter being referred to it, the Contracting Party concerned may adopt any safeguard measures it considers necessary to deal with the serious difficulties resulting from the practices in question; in particular it may withdraw tariff concessions.
As regards Article 24, the difficulties arising from the situation referred to in that Article shall be referred for examination to the Joint Committee, which may take any decision needed to put an end to such difficulties.
If the Joint Committee or the exporting Contracting Party has not taken a decision putting an end to the difficulties within 30 days of the matter being referred, the importing Contracting Party is authorized to levy a compensatory charge on the product imported.
The compensatory charge shall be calculated according to the incidence on the value of the goods in question of the tariff disparities in respect of the raw materials or intermediate products incorporated therein.
As regards Article 24a, the difficulties arising from the situations referred to in that Article shall be referred for examination to the Joint Committee. With regard to subparagraph (ii) of Article 24a, the threat of shortage shall be duly evidenced by appropriate quantitative and price indicators.
The Joint Committee may take any decision needed to put an end to the difficulties. If the Joint Committee has not taken such a decision within 30 days of the matter being referred to it, the exporting Contracting Party is authorized to apply temporarily appropriate measures on the exportation of the product concerned.
As regards Article 25, consultation in the Joint Committee shall take place before the Contracting Party concerned takes the appropriate measures.
Where exceptional circumstances requiring immediate action make prior examination impossible, the Contracting Party concerned may, in the situations specified in Articles 24,24a, 25 and 26 and also in the case of export aids having a direct and immediate incidence on trade, apply forthwith the precautionary measures strictly necessary to remedy the situation.
Article 28
Where one or more Member States of the Community or Norway is in difficulties or is seriously threatened with difficulties as regards its balance of payments, the Contracting Party concerned may take the necessary safeguard measures. It shall inform the other Contracting Party forthwith.
Article 29
Article 30
Article 31
The Joint Committee shall, in addition, meet whenever special circumstances so require, at the request of either Contracting Party, in accordance with the conditions to be laid down in its rules of procedure.
Article 32
The Contracting Parties may instruct the Joint Committee to examine this request and, where appropriate, to make recommendations to them, particularly with a view to opening negotiations. These recommendations may, where appropriate, aim at the attainment of a concerted harmonization, provided that the autonomy of decision of the two Contracting Parties is not impaired.
Article 33
The Annex and Protocols to the Agreement shall form an integral part thereof.
Article 34
Either Contracting Party may denounce the Agreement by notifying the other Contracting Party. The Agreement shall cease to be in force twelve months after the date of such notification.
Article 35
The Agreement shall apply, on the one hand, to the territories to which the Treaty establishing the European Economic Community applies upon the terms laid down in that Treaty and, on the other, to the territory of the Kingdom of Norway.
Article 36
This Agreement is drawn up in duplicate in the Danish, Dutch, English, French, German, Italian and Norwegian languages, each of these texts being equally authentic.
This Agreement will be approved by the Contracting Parties in accordance with their own procedures.
It shall enter into force on 1 July 1973, provided that the Contracting Parties have notified each other before that date that the procedures necessary to this end have been completed.
After that date this Agreement shall enter into force on the first day of the second month following such notification. The final date for such notification shall be 30 November 1973.
Udfærdiget i Bruxelles, den fjortende maj nitten hundrede og treoghalvfjerds.
Geschehen zu Brüssel am vierzehnten Mai neunzehnhundertdreiundsiebzig.
Done at Brussels on this fourteenth day of May in the year one thousand nine hundred and seventy-three.
Fait à Bruxelles, le quatorze mai mil neuf cent soixante-treize.
Fatto a Bruxelles, addì quattordici maggio millenovecentosettantatré.
Gedaan te Brussel, de veertiende mei negentienhonderddrieënzeventig.
Utferdiget i Brussel, fjortende mai nitten hundre og syttitre.
På Rådet for De europæiske Fællesskabers vegne
Im Namen des Rates der Europäischen Gemeinschaften
In the name of the Council of the European Communities
Au nom du Conseil des Communautés européennes
A nome del Consiglio delle Comunità europee
Namens de Raad van de Europese Gemeenschappen
For Kongeriket Norge
ANNEX
List of products referred to in Article 2 of the Agreement
|
Brussels Nomenclature heading No |
Description |
|
35.02 |
Albumins, albuminates and other albumin derivatives: A. Albumins: II. Other: (a) Ovalbumin and lactalbumin: 1. Dried (for example, in sheets, scales, flakes, powder) 2. Other |
|
45.01 |
Natural cork, unworked, crushed, granulated or ground; waste cork |
|
54.01 |
Flax, raw or processed but not spun: flax tow and waste (including pulled or garnetted rags) |
|
57.01 |
True hemp (‘Cannabis sativa’), raw or processed but not spun; tow and waste of true hemp (including pulled or garnetted rags or ropes) |
PROTOCOL No 1
concerning the treatment applicable to certain products
SECTION A
TREATMENT APPLICABLE TO IMPORTS INTO THE COMMUNITY OF CERTAIN PRODUCTS ORIGINATING IN NORWAY
Article 1
|
Timetable |
Products falling within heading No or subheading 48.01 C II, 48.01 F, 48.07 C, 48.13 or 48.15 B |
Other products |
|
Rates of duty applicable – percentage |
Percentage of basic duties applicable |
|
|
1 January 1978 |
8 |
65 |
|
1 January 1979 |
6 |
50 |
|
1 January 1980 |
6 |
50 |
|
1 January 1981 |
4 |
35 |
|
1 January 1982 |
4 |
35 |
|
1 January 1983 |
2 |
20 |
|
1 January 1984 |
0 |
0 |
|
Timetable |
Percentage of basic duties applicable |
|
1 January 1978 |
20 |
|
1 January 1979 |
15 |
|
1 January 1980 |
15 |
|
1 January 1981 |
10 |
|
1 January 1982 |
10 |
|
1 January 1983 |
5 |
|
1 January 1984 |
0 |
|
Timetable |
Products falling within heading No or subheading 48.01 C II, 48.01 F, 48.07 C, 48.13 or 48.15 B |
Other products |
|
Rates of duty applicable – percentage |
Percentage of Common Customs Tariff duty applicable |
|
|
1 January 1978 |
8 |
65 |
|
1 January 1979 |
6 |
50 |
|
1 January 1980 |
6 |
50 |
|
1 January 1981 |
4 |
35 |
|
1 January 1982 |
4 |
35 |
|
1 January 1983 |
2 |
20 |
|
1 January 1984 |
0 |
0 |
The basic amounts of these tariff quotas are shown in Annex B. For 1973 these amounts shall be reduced pro rata according to the date of entry into force of the Agreement.
Article 2
|
Timetable |
Percentage of basic duties applicable |
|||
|
On the date of entry into force of the Agreement |
|
95 |
|
|
|
1 January 1974 |
|
90 |
|
|
|
1 January 1975 |
|
85 |
|
|
|
1 January 1976 |
|
75 |
|
|
|
1 January 1977 |
|
60 |
|
|
|
1 January 1978 |
|
40 |
with a maximum of 3 % ad valorem (except subheading No 79.01 A) |
|
|
1 January 1979 |
|
30 20 |
for subheading No 28.56 A for other products |
|
|
1 January 1980 |
|
0 |
|
|
For tariff subheading No 79.01 A, listed in the table given in paragraph 2, the tariff reductions shall be made, as regards the Community as originally constituted and notwithstanding Article 5 (3) of the Agreement, rounded to the second decimal place.
|
CCT heading No |
Description |
|
►M15 28.56 ◄ |
►M15
|
|
56.01 |
Man-made fibres (discontinuous), not carded, combed or otherwise prepared for spinning: B. Regenerated textile fibres |
|
56.02 |
Continuous filament for the manufacture of man-made fibres (discontinuous): B. Of regenerated textile fibres |
|
ex 73.02 |
Ferro-alloys, excluding ferro-nickel and products covered by the ECSC Treaty |
|
77.01 |
Unwrought magnesium: magnesium waste (excluding shavings of uniform size) and scrap: A. Unwrought |
|
79.01 |
Unwrought zinc; zinc waste and scrap: A. Unwrought |
Article 3
Customs duties on imports into the Community as originally constituted and into Ireland of the products falling within subheading No 76.01 A and of headings Nos 76.02 and 76.03 of the Common Customs Tariff shall be progressively reduced to the following levels in accordance with the following timetable:
|
Timetable |
Community as originally constituted Rates of duty applicable — percentage ad valorem |
Ireland Percentage of basic duties applicable |
|
|
Heading Nos 76.02 and 76.03 |
Subheading No 76.01 A |
Heading Nos 76.02 and 76.03 |
|
|
On the date of entry into force of the Agreement |
11,4 |
6,6 |
95 % |
|
1 January 1974 |
10,8 |
6,3 |
90 % |
|
1 January 1975 |
10,2 |
5,9 |
85 % |
|
1 January 1976 |
9 |
5,6 |
75 % |
|
1 January 1977 |
7,2 |
4,2 |
60 % |
|
1 January 1978 |
3 |
3 |
25 % |
|
1 January 1979 |
2,7 |
2,7 |
22,5 % |
|
1 January 1980 |
0 |
0 |
0 % |
Article 4
Imports to which the tariff treatment provided for in Articles 1, 2 and 3 applies shall be subjected to annual indicative ceilings above which the customs duties applicable in respect of third countries may be reintroduced in accordance with the following provisions:
Taking into account the Community’s right to suspend application of ceilings for certain products, the basic amounts for fixing the ceilings for 1973 are shown in Annex C. The ceilings for 1973 are calculated by reducing the basic amounts pro rata according to the date of entry into force of the Agreement.
From 1974 on the level of the ceilings shall correspond to the basic amounts for 1973 increased annually by a compound rate of 5 %, with the exception that for subheading No 76.01 A the annual rates of increase shall be the following:
|
1974 |
3 % |
|
1975 |
3 % |
|
1976 |
3 % |
|
1977 |
5 % |
|
1978 |
5 % |
|
1979 |
10 % |
|
1980 |
10 % |
|
1981 |
10 % |
For products covered by this Protocol but not included in that Annex, the Community reserves the right to introduce ceilings of which the level will be equal to the average amount of imports into the Community over the last four years for which statistics are available, increased by 5 %; for the following years, the levels of these ceilings shall be raised annually by 5 %.
Should, for two successive years, imports of a product subject to a ceiling be less than 90 % of the level fixed, the Community shall suspend the application of this ceiling.
In the event of short-term economic difficulties, the Community reserves the right, after consultation within the Joint Committee, to maintain for a year the level fixed for the preceding year.
On 1 December each year the Community shall notify the Joint Committee of the list of products subject to ceilings in the following year and of the levels of the ceilings.
Imports under the tariff quotas opened in accordance with Article 1 (4) and (5) shall also be set off against the ceiling levels fixed for the same products.
Notwithstanding Article 3 of the Agreement and Articles 1, 2 and 3 of this Protocol, when a ceiling fixed for imports of a product covered by this Protocol is reached, Common Customs Tariff duties on imports of the product in question may be reimposed until the end of the calendar year.
In this event, prior to 1 July 1977:
|
Years |
Percentage of Common Customs Tariff duties applicable |
|
1974 |
40 |
|
1975 |
60 |
|
1976 |
80 |
The customs duties specified in Articles 1,2 and 3 of this Protocol shall be reintroduced on 1 January of the following year.
After 1 July 1977 the Contracting Parties shall examine within the Joint Committee the possibility of revising the percentage by which the levels of ceilings are raised, having regard to the trend of consumption and imports in the Community and to experience gained in applying this Article.
The ceilings shall be abolished at the end of the tariff-dismantling periods provided for in Articles 1, 2 and 3 of this Protocol, with the exception that for subheading No 76.01 A the ceilings shall be abolished on 31 December 1981.
SECTION B
TREATMENT APPLICABLE TO IMPORTS INTO NORWAY OF CERTAIN PRODUCTS ORIGINATING IN THE COMMUNITY
Article 5
|
Timetable |
Percentage of basic duties applicable |
|
1 January 1978 |
65 |
|
1 January 1979 |
50 |
|
1 January 1980 |
50 |
|
1 January 1981 |
35 |
|
1 January 1982 |
35 |
|
1 January 1983 |
20 |
|
1 January 1984 |
0 |
|
Timetable |
Percentage of basic duties applicable |
|
On the date of entry into force of the Agreement |
95 |
|
1 January 1974 |
90 |
|
1 January 1975 |
85 |
|
1 January 1976 |
75 |
|
1 January 1977 |
60 |
|
1 January 1978 |
40 |
|
1 January 1979 |
20 |
|
1 January 1980 |
0 |
Article 6
For products covered by section B of this Protocol, Norway reserves the right, in the event of it becoming absolutely necessary at a later stage and following consultations within the Joint Committee, to introduce indicative ceilings as defined in Section A of this Protocol, the methods applied to which will be the same as those mentioned therein. For imports exceeding the ceilings, customs duties not exceeding those applicable in respect of third countries may be reintroduced.
ANNEX A
List of tariff quotas for 1974
DENMARK, UNITED KINGDOM
|
CCT heading No |
Description |
Level (in metric tons) |
||
|
Denmark |
United Kingdom |
|||
|
Chapter 48 |
PAPER AND PAPERBOARD; ARTICLES OF PAPER PULP, OF PAPER OR OF PAPERBOARD |
|
|
|
|
►M15 48.01 ◄ |
►M15 Paper and paperboard (including cellulose wadding), in rolls or sheets: ◄ |
|
|
|
|
C. Kraft paper and kraft board: |
|
|
||
|
II. Other: |
|
|
||
|
— Kraft liner |
303 |
7 669 |
||
|
— Kraft paper for large bags |
2 615 |
15 428 |
||
|
— Other |
2 391 |
15 138 |
||
|
►M15
|
|
|
||
|
►M15
— Bible paper, manifold (thin typing) paper; other printing paper and other writing paper, not containing mechanical wood pulp or in which mechanical wood pulp does not represent more than 5 % |
7 484 |
15 419 |
||
|
►M15
— Printing paper and writing paper, containing mechanical wood pulp, excluding copying tissue |
8 460 |
27 192 |
||
|
►M15
— Fluting paper for corrugated paperboard |
558 |
21 108 |
||
|
►M15
— Sulphite paper for wrapping purposes |
1 208 |
12 582 |
||
|
►M15
— Other, excluding cellulose wadding and tissues |
4 855 |
— |
||
|
►M15
— Other paper |
— |
12 168 |
||
|
►M15
— Other paper board |
— |
10 903 |
||
|
48.03 |
Parchment or greaseproof paper and paperboard, and imitations thereof, and glazed transparent paper, in rolls or sheets |
2 495 |
18 433 |
|
|
48.04 |
Composite paper or paperboard (made by sticking flat layers together with an adhesive), not surface-coated or impregnated, whether or not internally reinforced, in rolls or sheets |
304 |
— |
|
|
48.05 |
Paper and paperboard, corrugated (with or without flat surface sheets), creped, crinkled, embossed or perforated, in rolls or sheets: |
|
|
|
|
B. Other |
573 |
— |
||
|
►M15 48.07 ◄ |
►M15 Paper and paperboard, impregnated, coated, surface-coloured, surface-decorated or printed (not constituting printed matter falling within Chapter 49), in rolls or sheets: ◄ |
|
|
|
|
►M15
|
|
|
||
|
►M15
— Coated printing or writing paper |
1 694 |
|
||
|
►M15
— Other |
5 132 |
|||
|
48.15 |
Other paper and paperboard, cut to size or shape: |
|
|
|
|
B. Other |
1 218 |
— |
||
|
►M15 48.16 ◄ |
►M15 Boxes, bags and other packing containers, of paper or paperboard; box files, letter trays and similar articles, of paper or paperboard, of a kind commonly used in offices, shops and the like: ◄ |
|
|
|
|
►M15
|
1 011 |
— |
||
|
►M15 48.21 ◄ |
►M15 Other articles of paper pulp, paper, paperboard or cellulose wadding: ◄ |
|
|
|
|
►M15
|
|
|
||
|
►M15
|
231 |
— |
||
|
►M15 ex Chapter 48 ◄ |
►M15 Other products falling within Chapter 48, excluding products falling within subheading 48.01 A ◄ |
1 000 |
7 399 |
|
|
ex Chapter 49 |
Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans — subject to customs duties in the Common Customs Tariff (headings Nos 49.03, 49.05 A, 49.07 A, 49.07 C II, 49.08, 49.09, 49.10, 49.11 B) |
175 |
►M13 68 625 ◄ |
|
ANNEX B
List of tariff quotas for 1973
IRELAND
|
CCT heading No |
Description |
Level (in metric tons) |
|
►M15 48.01 ◄ |
►M15 Paper and paperboard (including cellulose wadding) in rolls or sheets: ◄ |
|
|
C. Kraft paper and kraft board: |
|
|
|
II. Other: |
|
|
|
— Kraft paper for large bags |
2 058 |
|
|
►M15
|
|
|
|
►M15
— Printing paper and writing paper containing mechanical wood pulp, excluding copying tissue |
61 |
|
|
►M15
— Sulphite paper for wrapping purposes |
1.7 |
|
|
►M15
— Other, excluding cellulose wadding and tissues |
435.5 |
|
|
►M15
— Other paper and paperboard falling within heading No 48.01, excluding subheading 48.01 A and products subject to ceilings |
398.4 |
|
|
48.05 |
Paper and paperboard, corrugated (with or without flat surface sheets), creped, crinkled, embossed or perforated, in rolls or sheets: |
|
|
B. Other |
4 008 |
|
|
►M15 48.07 ◄ |
►M15 Paper and paperboard, impregnated, coated, surface-coloured, surface-decorated or printed (not constituting printed matter falling within Chapter 49), in rolls or sheets: ◄ |
|
|
►M15
|
|
|
|
►M15
— Coated printing or writing paper |
484 |
|
|
►M15
— Other |
965.5 |
ANNEX C
Basic amounts for 1973
|
CCT heading No |
Description |
Basic amount (in metric tons) |
|
|
►M15 28.56 ◄ |
►M15 Carbides, whether or not chemically defined: ◄ |
|
|
|
A. Of silicon |
34 500 |
||
|
►M15 48.01 ◄ |
►M15 Paper and paperboard (including cellulose wadding), in rolls or sheets: ◄ |
|
|
|
C. Kraft paper and kraft board: |
|
||
|
II. Other: |
|
||
|
— Kraft liner |
15 000 |
||
|
— Kraft paper for large bags |
28 500 |
||
|
— Other |
27 000 |
||
|
►M15
|
|
||
|
►M15
— Bible paper, manifold (thin typing) paper; other printing paper and other writing paper, not containing mechanical wood pulp or in which mechanical wood pulp does not represent more than 5 % |
35 000 |
||
|
►M15
— Printing paper and writing paper, containing mechanical wood pulp, excluding copying tissue |
114 000 |
||
|
►M15
— Fluting paper for corrugated paperboard |
43 500 |
||
|
►M15
— Sulphite paper for wrapping purposes |
20 000 |
||
|
►M15
— Other, excluding cellulose wadding and tissues |
33 000 |
||
|
48.03 |
Parchment or greaseproof paper and paperboard, and imitations thereof, and glazed transparent paper, in rolls or sheets |
21 000 |
|
|
►M15 48.07 ◄ |
►M15 Paper and paperboard, impregnated, coated, surface-coloured, surface-decorated or printed (not constituting printed matter falling within Chapter 49), in rolls or sheets: ◄ |
|
|
|
►M24
|
|
||
|
►M24
— Other, excluding coated printing or writing paper |
|
||
|
►M24
|
|
||
|
►M24
— Other, excluding coated printing or writing paper |
22 000 |
||
|
73.02 |
Ferro-alloys: |
|
|
|
A. Ferro-manganese: |
|
||
|
II. Other |
|||
|
D. Ferro-silico-manganese |
|||
|
C. Ferro-silicon |
180 000 |
||
|
E. Ferro-chromium and ferro-silico-chromium |
23 000 |
||
|
ex G. Other: |
|
||
|
— Ferro-vanadium |
490 |
||
|
— Other, excluding ferro-molybdenum |
11 000 |
||
|
76.01 |
Unwrought aluminium; aluminium waste and scrap: |
|
|
|
A. Unwrought |
190 000 |
||
|
76.02 |
Wrought bars, rods, angles, shapes and sections, of aluminium; aluminium wire |
12 000 |
|
|
76.03 |
Wrought plates, sheets and strip, of aluminium |
18 000 |
ANNEX D
|
Norwegian Customs Tariff heading No |
Description |
|
ex 51.04 |
Woven fabrics of man-made fibres (continuous), including woven fabrics of monofil or strip, falling within heading No 51.01 or 51.02, excluding cord fabrics, fabrics containing more than 10 % by weight of silk and fabrics for use in the industry for production of clothing |
|
53.10 |
Yarn of sheep’s or lambs’ wool, of horsehair or of other animal hair (fine or coarse) put up for retail sale |
|
ex 53.11 |
Woven fabrics, of sheep’s or lamb’s wool or of fine animal hair, excluding fabrics containing more than 10 % by weight of silk and fabrics for use in the industry for production of clothing |
|
54.05 |
Woven fabrics of flax or ramie |
|
55.06 |
Cotton yarn, put up for retail sale |
|
55.08 |
Terry towelling and similar terry fabrics, of cotton |
|
ex 55.09 |
Other woven fabrics of cotton, excluding fabrics containing more than 10 % by weight of silk and fabrics for use in the industry for production of clothing |
|
56.06 |
Yarn of man-made fibres (discontinuous or waste), put up for retail sale |
|
ex 56.07 |
Woven fabrics of man-made fibres (discontinuous or waste), excluding fabrics containing more than 10 % by weight of silk and fabrics for use in the industry for production of clothing |
|
ex 58.04 |
Woven pile fabrics and chenille fabrics (other than terry towelling or similar terry fabrics of cotton falling within heading No 55.08 and fabrics falling within heading No 58.05) excluding those for use in the industry for production of clothing: A. Containing continuous man-made textile fibres B. Other: 1. Of wool |
|
58.05 |
Narrow woven fabrics and narrow fabrics (bolduc) consisting of warp without weft assembled by means of an adhesive, other than goods falling within heading No 58.06: A. Containing silk or continuous man-made textile fibres B. Other: 2. Other |
|
58.06 |
Woven labels, badges and the like, not embroidered, in the piece, in strips or cut to shape or size |
|
58.07 |
Chenille yarn (including flock chenille yarn), gimped yarn (other than metallized yarn of heading No 52.01 and gimped horsehair yarn); braids and ornamental trimmings in the piece; tassels, pompons and the like |
|
58.09 |
Tulle and other net fabrics (but not including woven, knitted or crocheted fabrics), figured; hand or mechanically made lace, in the piece, in strips or in motifs |
|
59.01 |
Wadding and articles of wadding; textile flock and dust and mill neps: A. Sanitary towels and pads C. Other |
|
59.02 |
Felt and articles of felt, whether or not impregnated or coated: B. Other felt C. Articles of felt |
|
59.03 |
Bonded fibre fabrics, similar bonded yarn fabrics, and articles of such fabrics, whether or not impregnated or coated |
|
59.04 |
Twine, cordage, ropes and cables, plaited or not: A. Plaited B. Other: 1. Containing continuous man-made textile fibres 2. Other: (a) Of cotton or jute (b) Of other materials: 2. Other |
|
ex 59.08 |
Textile fabrics impregnated, coated, covered or laminated with preparations of cellulose derivatives or of other artificial plastic materials excluding those for use in the industry for production of clothing: B. Other |
|
59.13 |
Elastic fabrics and trimmings (other than knitted or crocheted goods) consisting of textile materials combined with rubber threads |
|
59.15 |
Textile hosepiping and similar tubing, with or without lining, armour or accessories of other materials |
|
ex 60.01 |
Knitted or crocheted fabrics, not elastic or rubberized, excluding those for use in the industry for production of clothing |
|
60.03 |
Stockings, under stockings, socks, ankle-socks, sockettes and the like, knitted or crocheted, not elastic or rubberized |
|
60.04 |
Under garments, knitted or crocheted, not elastic or rubberized |
|
60.05 |
Outer garments and other articles, knitted or crocheted, not elastic or rubberized |
|
61.01 |
Men’s and boys’ outer garments: B. Trimmed with fur C. Garments of which the chief constituent material contains silk or continuous man-made textile fibres D. Other |
|
61.02 |
Women’s, girls’ and infants’ outer garments |
|
61.03 |
Men’s and boys’ under garments, including collars, shirt fronts and cuffs |
|
61.04 |
Women’s, girls’ and infants’ under garments |
|
61.07 |
Ties, bow ties and cravats |
|
61.09 |
Corsets, corset-belts, suspender-belts, brassieres, braces, suspenders, garters and the like (including such articles of knitted or crocheted fabric), whether or not elastic |
|
62.01 |
Travelling rugs and blankets |
|
62.02 |
Bed linen, table linen, toilet linen and kitchen linen; curtains and other furnishing articles |
|
64.01 |
Footwear with outer soles and uppers of rubber or artificial plastic material |
|
ex 85.15 |
Receivers for colour television |
ANNEX E
|
Norwegian Customs Tariff heading No |
Description |
|
ex 33.06 |
Perfumery, cosmetics and toilet preparations |
|
36.01 |
Propellent powders |
|
36.02 |
Prepared explosives, other than propellent powders |
|
ex 36.04 |
Mining, blasting and safety fuses |
|
39.01 |
Condensation, polycondensation and polyaddition products, whether or not monified or polymerized, and whether or not linear (for example, phenoplasts, aminoplasts, alkyds, polyallyl esters and other unsaturated polyesters, silicones):
►M15
|
|
39.02 |
Polymerization and copolymerization products (for example, polyethylene, polytetrahaloethylenes, polyisobutylene, polystyrene, polyvinyl chloride, polyvinyl acetate, polyvinyl chloroacetate and other polyvinyl derivatives and polymethacrylic derivatives, coumarone-indene resins): A. Polyethylene imported in the forms specified in Note 3 (a), (b) and (e) to this Chapter ex B. Paving tiles containing at least 60 % of mineral extenders, excluding polypropylene and polyacrylic ex C. Other floor coverings, excluding polypropylene and polyacrylic ex E. Artificial sausage casings, excluding polypropylene and polyacrylic ex F. Other, excluding polypropylene and polyacrylic |
|
39.03 |
Regenerated cellulose; cellulose nitrate, cellulose acetate and other cellulose esters, cellulose ethers and other chemical derivatives of cellulose, plasticized or not (for example, collodions, celluloid); vulcanized fibre: A. Vulcanized fibre: 2. Other B. Collodion cotton, gun cotton and collodion C. Other: 1. Unworked: (a) Cellulose acetate moulding powders (c) Other 2. Worked: (b) Sponges (c) Other |
|
39.04 |
Hardened proteins (for example, hardened casein and hardened gelatin): A. Artificial sausage casings |
|
39.05 |
Natural resins modified by fusion (run gums); artificial resins obtained by esterification of natural resins or of resinic acids (ester gums); chemical derivatives of natural rubber (for example, chlorinated rubber, rubber hydrochloride, oxidized rubber, cyclized rubber) |
|
39.06 |
Other high polymers, artificial resins and artificial plastic materials, including alginic acid, its salts and esters; linoxyn |
|
39.07 |
Articles of materials of the kinds described in heading Nos 39.01 to 39.06: B. Artificial sausage casings C. Bags and similar packaging articles of film falling within heading No 39.03; lamps and parts thereof D. Viscose sponges E. Transmission, conveyor and elevator belts and belting F. Other |
|
40.09 |
Piping and tubing of unhardened vulcanized rubber: |
|
40.10 |
Transmission, conveyor or elevator belts or belting, of vulcanized rubber |
|
40.11 |
ex A. Pneumatic tyres for motor vehicles, aircraft and cycles, excluding tyres for motor-cycles, motor-scooters and tractors; inner tubes for motor vehicles and tractors; flaps and solid tyres for motor vehicles B. Other |
|
40.14 |
Other articles of unhardened vulcanized rubber: B. Other |
|
48.21 |
Other articles of paper pulp, paper, paperboard or cellulose wadding: A. Lampshades; moulded sheets for packing eggs, of paper pulp D. Other |
|
58.02 |
Other carpets, carpeting, rugs, mats and matting, and ‘Kelem’, ‘Schumacks’ and ‘Karamanie’ rugs and the like (made up or not) |
|
59.10 |
Linoleum and materials prepared on a textile base in a similar manner to linoleum, whether or not cut to shape or of a kind used as floor coverings; floor coverings consisting of a coating applied on a textile base, cut to shape or not: B. Other |
|
64.02 |
Footwear with outer soles of leather or composition leather; footwear (other than footwear falling within heading No 64.01) with outer soles of rubber or artificial plastic material |
|
69.11 |
Tableware and other articles of a kind commonly used for domestic or toilet purposes, of porcelain or china (including biscuit porcelain and parian) |
|
69.12 |
Tableware and other articles of a kind commonly used for domestic or toilet purposes, of other kinds of pottery |
|
70.05 |
Unworked drawn or blown glass (including flashed glass), in rectangles |
|
70.06 |
Cast, rolled, drawn or blown glass (including flashed or wired glass) in rectangles, surface-ground or polished, but not further worked |
|
70.07 |
Cast, rolled, drawn or blown glass (including flashed or wired glass) cut to shape other than rectangular shape, or bent or otherwise worked (for example, edge worked or engraved), whether or not surface-ground or polished; multiple-walled insulating glass; leaded lights and the like |
|
70.08 |
Safety glass consisting of toughened or laminated glass, shaped or not |
|
70.09 |
Glass mirrors (including rear-view mirrors), unframed, framed or backed B. Other |
|
ex 70.13 |
Glassware (other than articles falling within heading No 70.19) of a kind commonly used for table, kitchen, toilet or office purposes, for indoor decoration or for similar uses, excluding articles of crystal (of a content of minimum 24 % of lead oxides and of a density equal to or above 2-9), hand made or mechanically made, cut or not, decorated or not |
|
70.14 |
Illuminating glassware, signalling glassware and optical elements of glass, not optically worked nor of optical glass |
|
73.17 |
Tubes and pipes, of cast iron: A. Finned B. Soil pipes |
|
73.18 |
Tubes and pipes and blanks therefore, of iron (other than of cast iron) or steel, excluding high-pressure hydro-electric conduits: A. With riveted or folded edges B. Other: ex 1. Of a wall thickness of more than 1-8 mm, excluding seamless tubes and pipes |
|
73.20 |
Tube and pipe fittings (for example, joints elbows, unions and flanges), of iron or steel: A. Soil-pipe fittings |
|
73.38 |
Articles of a kind commonly used for domestic purposes, sanitary ware for indoor use, and parts of such articles and ware, of iron or steel; iron or steel wool; pot scourers and scouring and polishing pads, gloves and the like, of iron or steel: A. Articles of a kind commonly used for domestic purposes: 2. Other B. Builders’ sanitary ware for indoor use: 2. Other |
|
76.02 |
Wrought bars, rods, angles, shapes and sections, of aluminum; aluminum wire: B. Other |
|
76.03 |
Wrought plates, sheets and strip, of aluminum: B. Other |
|
82.04 |
Hand tools, including glaziers’ diamonds, not falling within any other heading of this Chapter; blow lamps, anvils, vices and clamps, other than accessories for, and parts of machine tools; portable forges; grinding wheels mounted on frameworks (hand or pedal operated) |
|
82.07 |
Tool-tips and plates, sticks and the like for tool-tips, unmounted, of sintered metal carbides (for example, carbides of tungsten, molybdenum or vanadium) |
|
ex 82.09 |
Knives with cutting blades, serrated or not (including pruning knives), other than knives falling within heading No 82.06, except knife blades |
|
82.14 |
Spoons, forks, fish-eaters, butter-knives, ladles, and similar kitchen or tableware |
|
83.01 |
Locks and padlocks (key, combination or electrically operated), and parts thereof, of base metal; frames incorporating locks, for handbags, trunks or the like, and parts of such frames, of base metal; keys for any of the foregoing articles, finished or not, of base metal |
|
83.02 |
Base metal fittings and mountings of a kind suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, caskets and the like (including automatic door closers), base metal hat-racks, hat-pegs, brackets and the like |
|
84.15 |
Refrigerators and refrigerating equipment (electrical and other): ex A. Combined refrigerators and freezers of a capacity of not more than 0.284 cubic metre ex C. Freezers and combined refrigerators and freezers |
|
84.47 |
Machine-tools for working wood, cork, bone, ebonite (vulcanite), hard artificial plastic materials or other hard carving materials, other than machines falling within heading No 84.49: B. Multi-spindle boring and drilling machines C. Morticing and tenoning machines for working wood D. Other |
|
84.61 |
Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats and the like including pressure reducing valves and thermostatically controlled valves |
|
85.04 |
Electric accumulators |
|
85.12 |
Electric instantaneous or storage water heaters and immersion heaters; electric soil heating apparatus and electric space heating apparatus; electric hair dressing appliances (for example hair dryers, hair curlers, curling tong heaters) and electric smoothing irons; electrothermic domestic appliances; electric heating resistors, other than those of carbon: B. Other |
|
85.23 |
Insulated (including enamelled or anodized) electric wire, cable, bars, strip and the like (including coaxial cable), whether or not fitted with connectors |
|
85.25 |
Insulators of any material |
|
85.26 |
Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal incorporated during moulding solely for purposes of assembly, but not including insulators falling within heading No 85.25 |
|
87.05 |
Bodies (including cabs) for the motor vehicles falling within heading No 87.01, 87.02 or 87.03: B. For motor vehicles for the transport of persons, including motor buses C. Other |
|
87.09 |
Motor-cycles, auto-cycles and cycles fitted with an auxiliary motor, with or without side-cars; side-cars of all kinds |
|
87.10 |
Cycles (including delivery tricycles), not motorized |
|
►M15 87.13 ◄ |
►M15
|
|
90.28 |
Electrical measuring, checking, analyzing or automatically controlling instruments and apparatus: A. Echo-sounding instruments and asdic apparatus |
|
ex 92.11 |
Gramophones, dictating machines and other sound recorders or reproducers, including record-players and tape decks, with or without sound-heads; television image and sound recorders or reproducers, magnetic |
|
94.03 |
Other furniture and parts thereof: A. Of steel: 1. Nickel- or chromium-plated |
|
96.01 |
Brooms and brushes, consisting of twigs or other vegetable materials merely bound together and not mounted in a head (for example, besoms and whisks), with or without handles; other brooms and brushes (including brushes of a kind used as parts of machines); prepared knots and tufts for broom or brush making; paint rollers; squeegees (other than roller squeegees) and mops: B. Paint rollers C. Other: 1. With mountings of paperboard, wood or metal, not covered: a) Of vegetable materials b) Other 2. Other |
|
98.01 |
Buttons and button moulds, studs, cuff-links, and press-fasteners, including snap-fasteners and press-studs; blanks and parts of such articles |
|
98.02 |
Slide fasteners and parts thereof |
PROTOCOL No 2
concerning products subject to special arrangements to take account of differences in the cost of agricultural products incorporated therein
Article 1
In order to take account of differences in the cost of the agricultural products incorporated in the goods specified in the Tables annexed to this Protocol, the Agreement does not preclude:
the levying, upon import, of a variable component or fixed amount, or the application of internal price compensation measures;
the application of measures adopted upon export.
Article 2
For the products specified in the Tables annexed to this Protocol the basic duties shall be:
for the Community as originally constituted: the duties actually applied on 1 January 1972;
for Denmark, Ireland and the United Kingdom:
in respect of products covered by Regulation (EEC) No 1059/69:
the customs duties resulting from Article 47 of the ‘Act concerning the Conditions of Accession and the Adjustments to the Treaties’; the Joint Committee shall be informed of these basic duties in good time and in any case before the first reduction provided for in paragraph 2;
in respect of the other products: the duties actually applied on 1 January 1972;
for Norway: the duties shown in Table II annexed to this Protocol.
On the date of entry into force of the Agreement,
1 January 1974,
1 January 1975,
1 January 1976,
1 July 1977.
However, if the duty applicable on 1 July 1977 is greater than the basic duty, the difference between these duties shall be reduced by 40 % on 1 January 1974 and again reduced by 20 % on each of the following dates:
1 January 1975,
1 January 1976,
1 July 1977.
Notwithstanding Article 5 (3) of the Agreement and subject to the application by the Community of Article 39 (5) of the ‘Act concerning the Conditions of Accession and the Adjustments to the Treaties’, as regards the specific duties or the specific part of the mixed duties of the customs tariff of the United Kingdom, paragraphs 1 and 2 shall be applied with rounding to the fourth decimal place for the products listed below:
|
CCT heading No |
Description |
|
22.06 |
Vermouths, and other wines of fresh grapes flavoured with aromatic extracts |
|
ex 22.09 |
Spirits (other than those of heading No 22.08); liqueurs and other spirituous beverages; compound alcoholic preparations (known as ‘concentrated extracts’) for the manufacture of beverages: — Spirits other than rum, arrack, tafia, gin, whisky, vodka with an ethyl alcohol content of 45.2° or less, and plum, pear or cherry brandy, containing eggs or egg yolk and/or sugar (sucrose or invert sugar). |
Article 3
When defining these rules or at a later date, the Joint Committee shall decide whether to include in this Protocol other products of Chapters 1 to 24 of the Brussels Nomenclature which are not subject to agricultural regulations in the territories of the Contracting Parties.
TABLE I
EUROPEAN ECONOMIC COMMUNITY
|
CCT heading No |
Description |
Basic duties |
Duty applicable on 1 July 1977 |
|
15.10 |
Fatty acids; acid oils from refining; fatty alcohols: |
|
|
|
ex C. Other fatty acids; acid oils from refining: |
|
|
|
|
— Products obtained from pinewood, with a fatty acid content of 90 % or more by weight |
4.5 % |
0 |
|
|
17.04 |
Sugar confectionery, not containing cocoa: |
|
|
|
A. Liquorice extract containing more than 10 % by weight of sucrose but not containing other added substances |
21 % |
12 % |
|
|
B. Chewing gum |
8 % + vc with max. of 23 % |
vc |
|
|
C. White chocolate |
13 % + vc with max. of 27 % + ads |
vc |
|
|
D. Other |
13 % + vc with max. of 27 % + ads |
vc |
|
|
18.06 |
Chocolate and other food preparations containing cocoa: |
|
|
|
A. Cocoa powder, not otherwise sweetened than by the addition of sucrose |
10 % + vc |
vc |
|
|
B. Ice-cream (not including ice-cream powder) |
12 % + vc with max. of 27 % + ads |
vc |
|
|
C. Chocolate and chocolate goods, whether or not filled; sugar confectionery and substitutes therefore made from sugar substitution products, containing cocoa |
12 % + vc with max. of 27 % + ads |
vc |
|
|
D. Other: |
|
|
|
|
I. Containing no milkfats or containing less than 1.5 % by weight of such fats: |
|
|
|
|
(a) In immediate packings of a net capacity of 500 g or less |
12 % + vc with max. of 27 % + ads |
vc |
|
|
(b) Other: |
|
|
|
|
— In immediate packings of a net capacity of more than 500 g but of not more than 1 kg |
19 % + vc |
vc |
|
|
— Other |
19 % + vc |
6 % + vc |
|
|
II. Containing by weight of milkfats: |
|
|
|
|
(a) More than 1.5 % but less than 6.5 % |
|
|
|
|
1. In immediate packings of a net capacity of 500 g or less |
12 % + vc with max. of 27 % + ads |
vc |
|
|
2. Other: |
|
|
|
|
— In immediate packings of a net capacity of more than 500 g but of not more than 1 kg |
19 % + vc |
vc |
|
|
— Other |
19 % + vc |
6 % + vc |
|
|
(b) More than 6.5 % but less than 26 %: |
|
|
|
|
1. In immediate packings of a net capacity of 500 g or less |
12 % + vc |
VC |
|
|
2. Other: |
|
|
|
|
— In immediate packings of a net capacity of more than 500 g but of not more than 1 kg |
19 % + vc |
VC |
|
|
— Other |
19 % + vc |
6 % + vc |
|
|
(c) 26 % or more: |
|
|
|
|
1. In immediate packings of a net capacity of 500 g or less |
12 % + vc |
vc |
|
|
2. Other: |
|
|
|
|
— In immediate packings of a net capacity of more than 500 g but of not more than 1 kg |
19 % + vc |
vc |
|
|
— Other |
19 % + vc |
6 % + vc |
|
|
19.01 |
Malt extract |
8 % + vc |
vc |
|
19.02 |
Malt extract; preparations of flour, meal, starch or malt extract, of a kind used as infant food or for dietetic or culinary purposes, containing less than 50 % by weight of cocoa: |
|
|
|
A. Malt extract |
8 % + vc |
vc |
|
|
B. Other |
11 % + vc |
vc |
|
|
19.03 |
Macaroni, spaghetti and similar products |
12 % + vc |
vc |
|
19.04 |
Tapioca and sago; tapioca and sago substitutes obtained from potato or other starches |
10 % + vc |
vc |
|
19.05 |
Prepared foods obtained by the swelling or roasting of cereals or cereal products (puffed rice, cornflakes and similar products) |
8 % + vc |
vc |
|
19.06 |
Communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products |
7 % + vc |
vc |
|
19.07 |
Bread, ships’ biscuits and other ordinary bakers’ wares, not containing added sugar, honey, eggs, fats, cheese or fruit; communion wafers, cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products: |
|
|
|
A. Crispbread |
9 % + vc with a max. of 24 %+adf |
vc |
|
|
B. Matzos |
6 % + vc with a max. of 20 %+adf |
vc |
|
|
C. Communion wafers, cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products |
7 % + vc |
vc |
|
|
D. Other |
14 % + vc |
vc |
|
|
19.08 |
Pastry, biscuits, cakes and other fine bakers’ wares, whether or not containing cocoa in any proportion: |
|
|
|
A. Gingerbread and the like |
13 % + vc |
vc |
|
|
B. Other |
13 % + vc with max. of 30 % + adf or 35 % + ads |
vc |
|
|
21.02 |
Extracts, essences or concentrates, of coffee, tea or mate and preparations with a basis of those extracts, essences or concentrates: roasted chicory and other roasted coffee substitutes and extracts, essences and concentrates thereof: |
|
|
|
C. Roasted chicory and other roasted coffee substitutes: |
|
|
|
|
II. Other |
8 % + vc |
vc |
|
|
D. Extracts, essences and concentrates of roasted chicory and other roasted coffee substitutes: |
|
|
|
|
II. Other |
14 % + vc |
vc |
|
|
21.04 |
Sauces; mixed condiments and mixed seasonings: |
|
|
|
B. Other |
|
|
|
|
— Containing tomatoes |
18 % |
10 % |
|
|
— Not specified |
18 % |
6 % |
|
|
21.05 |
Soups and broths, in liquid, solid or powder form; homogenized composite food preparations: |
|
|
|
A. Soups and broths, in liquid, solid or powder form: |
|
|
|
|
— Containing tomatoes |
18 % |
10 % |
|
|
— Not specified |
18 % |
6 % |
|
|
21.06 |
Natural yeasts (active or inactive); prepared baking powders: |
|
|
|
A. Active natural yeasts: |
|
|
|
|
II. Bakers’ yeasts |
15 % + vc |
vc |
|
|
B. Inactive natural yeasts: |
|
|
|
|
I. In tablet, cube or similar form, or in immediate packings of a net capacity of 1 kg or less |
13 % |
4 % |
|
|
II. Other |
8 % |
4 % |
|
|
21.07 |
Food preparations not elsewhere specified or included: |
|
|
|
A. Cereals in grain or ear form, pre-cooked or otherwise prepared |
13 % + vc |
vc |
|
|
B. Ravioli, macaroni, spaghetti and similar products, not stuffed, cooked; the foregoing preparations, stuffed |
13 % + vc |
vc |
|
|
C. Ice-cream (not including ice-cream powder) and other ices |
13 % + vc |
vc |
|
|
D. Prepared yoghourt; prepared milk, in powder form, for use as infants’ food or for dietetic or culinary purposes |
13 % + vc |
vc |
|
|
E. Cheese fondues |
13 % + vc with max. of 35 UA per 100 kg net weight |
vc with max. of 25 UA per 100 kg net weight |
|
|
G. Other: |
|
|
|
|
I. Containing no milkfats or containing less than 1-5 % by weight of such fats: |
|
|
|
|
a) Containing no sucrose or containing less than 5 % by weight of sucrose (including invert sugar expressed as sucrose): |
|
|
|
|
ex 1. Containing no starch or containing less than 5 % by weight of-starch: |
|
|
|
|
— Hydrolysates of proteins; autolysates of yeast |
20 % |
6 % |
|
|
2. Containing by weight of starch 5 % or more |
13 % + vc |
vc |
|
|
b) Containing 5 % or more but less than 15 % by weight of sucrose (including invert sugar expressed as sucrose) |
13 % + vc |
vc |
|
|
c) Containing 15 % or more but less than 30 % by weight of sucrose (including invert sugar expressed as sucrose) |
13 % + vc |
vc |
|
|
d) Containing 30 % or more but less than 50 % by weight of sucrose (including invert sugar expressed as sucrose) |
13 % + vc |
vc |
|
|
e) Containing 50 % or more but less than 85 % by weight of sucrose (including invert sugar expressed as sucrose) |
13 % + vc |
vc |
|
|
f) Containing 85 % or more by weight of sucrose (including invert sugar expressed as sucrose) |
13 % + vc |
vc |
|
|
II. Containing 1-5 % or more but less than 6 % by weight of milkfats |
13 % + vc |
vc |
|
|
III. Containing 6 % or more but less than 12 % by weight of milkfats |
13 % + vc |
vc |
|
|
IV. Containing 12 % or more but less than 18 % by weight of milkfats |
13 % + vc |
vc |
|
|
V. Containing 18 % or more but less than 26 % by weight of milkfats |
13 % + vc |
vc |
|
|
VI. Containing 26 %-or more but less than 45 % by weight of milkfats: |
|
|
|
|
— In immediate packings of a net capacity of 1 kg or less |
13 % + vc |
vc |
|
|
— Other |
13 % + vc |
6 % + vc |
|
|
VII. Containing 45 % or more but less than 65 % by weight of milkfats: |
|
|
|
|
— In immediate packings of a net capacity of 1 kg or less |
13 % + vc |
vc |
|
|
— Other |
13 % + vc |
6 % + vc |
|
|
VIII. Containing 65 % or more but less than 85 % by weight of milkfats: |
|
|
|
|
— In immediate packings of a net capacity of 1 kg or less |
13 % + vc |
vc |
|
|
— Other |
13 % + vc |
6 % + vc |
|
|
IX. Containing 85 % or more by weight of milkfats: |
|
|
|
|
— In immediate packings of a net capacity of 1 kg or less |
13 % + vc |
vc |
|
|
— Other |
13 % + vc |
6 % + vc |
|
|
22.02 |
Lemonade, flavoured spa waters and flavoured aerated waters, and other non-alcoholic beverages, not including fruit and vegetable juices falling within heading No 20.07: |
|
|
|
ex A. Not containing milk or milkfats: |
|
|
|
|
— Containing sugar (sucrose or invert sugar) |
15 % |
0 |
|
|
B. Other |
8 % + vc |
vc |
|
|
22.03 |
Beer made from malt |
24 % |
10 % |
|
22.06 |
Vermouths, and other wines of fresh grapes flavoured with aromatic extracts: |
|
|
|
A. Of an actual alcoholic strength of 18o or less, in containers containing: |
|
|
|
|
I. 2 litres or less |
17 UA/hl |
0 |
|
|
II. More than 2 litres |
14 UA/hl |
0 |
|
|
B. Of an actual alcoholic strength exceeding 18o but not exceeding 22o, in containers containing: |
|
|
|
|
I. 2 litres or less |
19 UA/hl |
0 |
|
|
II. More than 2 litres |
16 UA/hl |
0 |
|
|
C. Of an actual alcoholic strength exceeding 22o, in containers containing: |
|
|
|
|
I. 2 litres or less |
1.60 UA/hl per degree of alcohol + 10 UA/hl |
0 |
|
|
II. More than 2 litres |
1.60 UA/hl per degree of alcohol |
0 |
|
|
22.09 |
Spirits (other than those of heading No 22.08); liqueurs and other spirituous beverages; compound alcoholic preparations (known as ‘concentrated extracts’) for the manufacture of beverages: |
|
|
|
C. Spirituous beverages: |
|
|
|
|
ex V. Other: |
|
|
|
|
— Containing eggs or egg yolks and/or sugar (sucrose or invert sugar), in containers containing: |
|
|
|
|
(a) 2 litres or less |
1-60 UA/hl per degree of alcohol + 10 UA/hl |
1 UA/hl per degree of alcohol + 6 UA/hl |
|
|
(b) More than 2 litres |
1-60 UA/hl per degree of alcohol |
1 UA/hl per degree of alcohol |
|
|
29.04 |
Acyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives: |
|
|
|
C. Polyhydric alcohols: |
|
|
|
|
II. Mannitol |
12 % + vc |
8 % + vc |
|
|
III. Sorbitol |
|
|
|
|
(a) In aqueous solutions: |
|
|
|
|
1. Containing 2 % or less by weight of mannitol, calculated on the sorbitol content |
12 % + vc |
6 % + vc |
|
|
2. Other |
9 % + vc |
6 % + vc |
|
|
(b) Other: |
|
|
|
|
1. Containing 2 % or less by weight of mannitol, calculated on the sorbitol content |
12 % + vc |
6 % + vc |
|
|
2. Other |
9 % + vc |
6 % + vc |
|
|
29.10 |
Acetals and hemiacetals and single or complex oxygen-function acetals and hemiacetals, and their halogenated, sulphonated, nitrated or nitrosated derivatives: |
|
|
|
ex B. Other: |
|
|
|
|
— Methyl glucosides |
14,4 % |
8 % |
|
|
29.14 |
Monocarboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives: |
|
|
|
ex A. Saturated acyclic monocarboxylic acids: |
|
|
|
|
— Esters of mannitol and esters of sorbitol |
from 8.8 % to 18.4 % |
8 % |
|
|
ex B. Unsaturated acyclic monocarboxylic acids: |
|
|
|
|
— Esters of mannitol and esters of sorbitol |
from 12 % to 13.6 % |
8 % |
|
|
29.15 |
Polycarboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives: |
|
|
|
A. Acyclic polycarboxylic acids: |
|
|
|
|
ex V. Other: |
|
|
|
|
— Itaconic acid and its salts and esters |
10,4 % |
0 |
|
|
29.16 |
Carboxylic acids with alcohol, phenol, aldehyde or ketone function and other single or complex oxygen-function carboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives: |
|
|
|
A. Carboxylic acids with alcohol function: |
|
|
|
|
I. Lactic acid and its salts and esters |
13-6 % |
0 |
|
|
IV. Citric acid and its salts and esters: |
|
|
|
|
(a) Citric acid |
15,2 % |
0 |
|
|
(b) Crude calcium citrate |
5,6 % |
0 |
|
|
(c) Other |
16 % |
0 |
|
|
►M10
German text: ex VIII. andere: — Glycerinsäure, Glykolsäure, Zuckersäure, Isozuckersäure, Heptazuckersäure, ihre Salze und Ester. English text: ex VIII. Other: — Glyceric acid, glycolic acid, saccharic acid, isosaccharic acid, heptasaccharic acid, their salts and esters. French text: ex VIII. autres: — Acide glycérique, acide glycolique, acide saccharique, acide isosaccharique, acide heptasaccharique, leurs sels et leurs esters. Italian text:, ex VIII. altri: — Acido glicerico, acido glicolico, acido saccarico, acido isosaccarico, acido eptasaccarico, loro sali e loro esteri. Dutch text: ex VIII. andere: — Glycerinezuur, glycolzuur, suikerzuur, isosuikerzuur, heptasuikerzuur, alsmede zouten en esters daarvan. The Danish text remains unchanged. |
12 % |
8 % |
|
|
29.35 |
Heterocyclic compounds; nucleic acids: |
|
|
|
ex Q. Other: |
|
|
|
|
— Anhydrous mannitol and sorbitol compounds, excluding maltol and isomaltol |
10,4 % |
8 % |
|
|
29.43 |
Sugars, chemically pure, other than sucrose, glucose and lactose; sugar ethers and sugar esters, and their salts, other than products of headings Nos 29.39, 29.41 and 29.42: |
|
|
|
B. Other |
20 % |
8 % |
|
|
29.44 |
Antibiotics: |
|
|
|
A. Penicillins |
16,8 % |
0 |
|
|
35.01 |
Casein, caseinates and other casein derivatives; casein glues: |
|
|
|
A. Casein: |
|
|
|
|
I. For the manufacture of regenerated textile fibres () |
2 % |
0 |
|
|
II. For industrial uses other than the manufacture of foodstuffs or fodder (): |
|
|
|
|
— With a water content of 50 % or more by weight |
5 % |
0 |
|
|
— Other |
5 % |
3 % |
|
|
III. Other |
14 % |
12 % |
|
|
B. Casein glues |
13 % |
11 % |
|
|
C. Other |
10 % |
8 % |
|
|
35.05 |
Dextrins and dextrin glues; soluble or roasted starches; starch glues: |
|
|
|
A. Dextrins; soluble or roasted starches |
14 % + vc |
vc |
|
|
B. Glues made from dextrin or from starch |
13 % + vc with max. of 18 % |
vc |
|
|
35.06 |
Prepared glues not elsewhere specified or included; products suitable for use as glues, put up for sale by retail as glues in packages not exceeding a net weight of 1 kg: |
|
|
|
A. Prepared glues not elsewhere specified or included: |
|
|
|
|
ex II. Other glues: |
|
|
|
|
— With a basis of sodium silicate emulsion |
12,8 % |
0 |
|
|
ex B. Products suitable for use as glues, put up for sale by retail as glues in packages not exceeding a net weight of 1 kg: |
|
|
|
|
— With a basis of sodium silicate emulsion |
15,2 % |
0 |
|
|
38.12 |
Prepared glazings, prepared dressings and prepared mordants, of a kind used in the textile, paper, leather or like industries: |
|
|
|
A. Prepared glazings and prepared dressings: |
|
|
|
|
I. With a basis of amylaceous substances |
13 % + vc with max. of 20 % |
vc |
|
|
38.19 |
Chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: |
|
|
|
Q. Foundry core binders based on synthetic resins |
12,8 % |
8 % |
|
|
T. Sorbitol, other than that falling within subheading 29.04 C III: |
|
|
|
|
I. In aqueous solution: |
|
|
|
|
(a) Containing 2 % or less by weight of mannitol, calculated on the sorbitol content |
12 % + vc |
6 % + vc |
|
|
(b) Other |
9 % + vc |
6 % + vc |
|
|
II. Other: |
|
|
|
|
(a) Containing 2 % or less by weight of mannitol, calculated on the sorbitol content |
12 % + vc |
6 % + vc |
|
|
(b) Other |
9 % + vc |
6 % + vc |
|
|
ex U. Other: |
|
|
|
|
— Products obtained from the cracking of sorbitol |
14,4 % |
8 % |
|
|
39.02 |
Polymerization and copolymerization products (for example, polyethylene, polytetrahaloethylenes, polyisobutylene, polystyrene, polyvinyl chloride, polyvinyl acetate, polyvinyl chloroacetate and other polyvinyl derivatives, polyacrylic and polymethacrylic derivatives, coumarone-indene resins): |
|
|
|
ex C. Other: |
|
|
|
|
— Adhesives with a basis of resin emulsions |
from 12 % to 18,4 % |
0 |
|
|
39.06 |
Other high polymers, artificial resins and artificial plastic materials, including alginic acid, its salts and esters; linoxyn: |
|
|
|
ex B. Other: |
|
|
|
|
— Dextran |
16 % |
6 % |
|
|
— Not specified, excluding linoxyn |
16 % |
8 % |
|
|
(1)
Entry under this subheading is subject to conditions to be determined by the competent authorities. |
|||
Note: The abbreviations vc, ads, adf appearing in this list mean ‘variable component’, ‘additional duty on sugar’ ‘additional duty on flour’.
TABLE II
NORWAY
|
Norwegian Customs Tariff heading No |
Description |
Basic duties (N.Kr./kg) |
Duty applicable on 1 July 1977 |
|
15.10 |
Fatty acids; acid oils from refining; fatty alcohols: |
|
|
|
ex C. Other: |
|
|
|
|
— Fatty acids obtained from pinewood, with a fatty acid content of 90 % or more by weight |
0,16 |
0 |
|
|
17.04 |
Sugar confectionery, not containing cocoa: |
|
|
|
A. Liquorice |
2,00 |
0 (1) |
|
|
B. Other |
1,00 |
0 (1) |
|
|
18.06 |
Chocolate and other food preparations containing cocoa: |
|
|
|
A. Chocolate; cocoa powder, sweetened; ice-cream; ice-cream powders and table cream powders: |
|
|
|
|
— Cocoa powder, sweetened |
1,00 |
0 |
|
|
— Chocolate; ice-cream powders and table cream powders |
1,00 |
0 (1) |
|
|
— Ice-cream |
15 % with a minimum of N.Kr. 0,90 per kg |
0,90 |
|
|
B. Other |
0,50 |
0 (1) |
|
|
19.01 |
Malt extract |
0,40 |
0 |
|
19.02 |
Malt extract; preparations of flour, meal, starch or malt extract, of a kind used as infant food or for dietetic or culinary purposes, containing less than 50 % by weight of cocoa: |
|
|
|
— Malt extract |
0.40 |
0 |
|
|
— Cake mixtures in containers of a net capacity of less than 2 kg |
0.80 |
0 (1) |
|
|
— Other |
0.80 |
0.50 (1) |
|
|
19.03 |
Macaroni, spaghetti and similar products |
0,40 |
0,20 (1) |
|
19.04 |
Tapioca and sago; tapioca and sago substitutes obtained from potato or other starches |
0,60 |
0,20 (1) |
|
19.05 |
Prepared foods obtained by the swelling or roasting of cereal products (puffed rice, cornflakes and similar products) |
0,40 |
0 |
|
19.06 |
Communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products |
1,60 |
0 |
|
19.07 |
Bread, ships’ biscuits and other ordinary bakers’ wares, not containing added sugar, honey, eggs, fats, cheese or fruit; communion wafers, cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products: |
|
|
|
— Communion wafers, cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products |
1.60 |
0 |
|
|
— ‘Knekkebrød’ |
20 % |
10 % (1) |
|
|
— ‘Flatbrød’: |
|
|
|
|
— Containing wheat |
0.80 |
0 |
|
|
— Other |
0.20 |
0 |
|
|
— Ships’ biscuits, fine bread crumbs and rusks: |
|
|
|
|
— Containing wheat |
0.80 |
0 |
|
|
— Other |
0.20 |
0 |
|
|
— Other: |
|
|
|
|
— Containing wheat |
0.80 |
0.50 (1) |
|
|
— Other |
0.20 |
0 |
|
|
19.08 |
Pastry, biscuits, cakes and other fine bakers’ wares, whether or not containing cocoa in any proportion |
2,00 |
0 (1) |
|
ex 21.02 |
Roasted chicory and other roasted coffee substitutes; extracts, essences and concentrates thereof |
0 |
0 |
|
21.04 |
Sauces; mixed condiments and mixed seasonings |
18 % + vc with a maximum of N.Kr. 1,50 per kg |
vc (1) |
|
21.05 |
Soups and broths, in liquid, solid or powder form; homogenized composite food preparations: |
|
|
|
B. Soups and broths, in liquid, solid or powder form: |
|
|
|
|
1. In airtight containers: |
|
|
|
|
(a) Meat broth |
8 % + vc with a maximum of N.Kr. 0,70 per kg |
vc (1) |
|
|
(b) Vegetable soups and broths, containing neither meat or extract |
8 % + vc with a maximum of N.Kr. 0,35 per kg |
vc (1) |
|
|
(c) Other: |
|
|
|
|
1. Fish soup (containing not less than 25 % by weight of fish) |
8 % + vc |
vc (1) |
|
|
2. Other |
8 % + vc |
vc (1) |
|
|
2. In other containers: |
|
|
|
|
(a) Containing meat or meat extract |
8 % + vc |
vc (1) |
|
|
(b) Other |
8 % + vc |
vc (1) |
|
|
21.06 |
Natural yeasts (active or inactive); prepared baking powders: |
|
|
|
ex A. Natural yeasts: |
|
|
|
|
1. Wine yeast |
1,20 |
0 |
|
|
2. Yeast for feeding animals |
Free |
Free |
|
|
3. Other, except pressed yeast |
30 % |
0 |
|
|
21.07 |
Food preparations not elsewhere specified or included: |
|
|
|
A. Semi-manufactures intended for the manufacture of products falling within heading No 19.05 |
0,20 |
0 |
|
|
B. Sweets and chewing gum, not containing sugar |
1,00 |
0 (1) |
|
|
C. Non-alcoholic preparations (known as ‘concentrated extracts’) for the manufacture of beverages: |
|
|
|
|
— Concentrated extracts of juice from apples and blackcurrants |
15 % |
10 % (1) |
|
|
— Other |
15 % |
0 |
|
|
D. Prepared maize |
15 % |
0 |
|
|
E. Protein concentrates |
30 % |
0 |
|
|
F. Other: |
|
|
|
|
1. Ice-cream, ice-cream powders and table cream powders: |
|
|
|
|
— Ice-cream containing fatty substances |
30 % with a minimum of NKr 1 · 70/kg |
NKr 1 · 70/kg |
|
|
— Other |
30 % |
0 (1) |
|
|
2. Other: |
|
|
|
|
— Sweetfat; fatty emulsions and similar products of the kinds used by bakers and pastry cooks: |
|
|
|
|
— With a content of fatty substances of less than 10 % by weight |
30 % |
0 (1) |
|
|
— With a content of fatty substances of 10 % or more by weight |
30 % |
25 % (1) |
|
|
— Yoghurt, flavoured or with added fruit |
30 % with a minimum of NKr 1 · 70/kg |
NKr 1 · 70/kg |
|
|
— Minute rice and the like |
30 % |
0 |
|
|
— Coffee pastes; ravioli, macaroni, spaghetti and other similar pastes, cooked |
30 % |
0 |
|
|
— Other |
30 % |
0 |
|
|
22.02 |
Lemonade, flavoured spa waters and flavoured aerated waters, and other non-alcoholic beverages not including fruit and vegetable juices falling within heading No 20.07 |
1,00 |
0 (1) |
|
22.03 |
Beer made from malt: |
|
|
|
A. In bottles or jars |
N.Kr. 2,00 per litre |
0 |
|
|
B. In other containers |
1,80 |
0 |
|
|
22.06 |
Vermouths and other wines of fresh grapes flavoured with aromatic extracts |
Free |
Free |
|
ex 22.09 |
Ethyl alcohol, undenatured, of a strength of less than 80; liqueurs and other spirituous beverages; compound alcoholic preparations (known as ‘concentrated extracts’) for the manufacture of beverages: |
|
|
|
— Spirituous beverages containing eggs or egg yolks and/or sugar (sucrose or invert sugar) |
Free |
Free |
|
|
29.04 |
Acyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives: |
|
|
|
ex C. Other: |
|
|
|
|
— Mannitol and sorbitol |
15 % |
0 |
|
|
ex 29.10 |
Acetals and hemiacetals and single or complex oxygen-function acetals and hemiacetals, and their halogenated, sulphonated, nitrated or nitrosated derivatives: |
|
|
|
— Methylglucosides |
15 % |
0 |
|
|
ex 29.14 |
Monocarboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives: |
|
|
|
— Esters of mannitol and sorbitol |
24 % |
0 |
|
|
29.15 |
Polycarboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives: |
|
|
|
ex A. Itaconic acids and their salts |
Free |
Free |
|
|
ex B. Esters of itaconic acids |
24 % |
0 |
|
|
ex 29.16 |
Carboxylic acids with alcohol, phenol, aldehyde or ketone function and other single or complex oxygen-function carboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives: |
|
|
|
►M10
The German text remains unchanged. The English text remains unchanged. French text: (i) Acide lactique, acide citrique, acide glycérique, acide glycolique, acide saccharique, acide isosaccharique, acide heptasaccharique et leurs sels. Italian text: (i) Acido lattico, acido citrico, acido glicerico, acido glicolico, acido saccarico, acido isosaccarico, acido eptasaccarico e loro sali. Dutch text: (i) Melkzuur, citroenzuur, glycerinezuur, glycolzuur, suikerzuur, isosuikerzuur, heptasuikerzuur, alsmede zouten en esters daarvan. The Danish text remains unchanged. |
Free |
Free |
|
|
(ii) Esters of lactic acid, citric acid, glyseric acid, glycolic acid, saccharic acid, isosaccharic acid and heptasaccharic acid |
15 % |
0 |
|
|
ex 29.35 |
Heterocyclic compounds, nucleic acids: |
|
|
|
— Anhydrides of mannitol and sorbitol, except of maltol and isomaltol |
15 % |
0 |
|
|
ex 29.43 |
Sugars, chemically pure, other than sucrose, glucose and lactose; sugar ethers and sugar esters, and their salts, other than products of headings Nos 29.39, 29.41 and 29.42: |
|
|
|
— Other than rhamnose, raffinose and mannose |
0,10 |
0 |
|
|
ex 29.44 |
Antibiotics: |
|
|
|
— Penicillins and their salts and other derivatives |
Free |
Free |
|
|
35.01 |
Casein, caseinates and other casein derivatives; casein glues: |
|
|
|
A. Casein |
1,50 |
0 (1) |
|
|
B. Casein glues |
25 % |
0 (1) |
|
|
C. Other |
15 % |
0 (1) |
|
|
35.05 |
Dextrins and dextrin glues; soluble or roasted starches; starch glues: |
|
|
|
A. Soluble and roasted starches: |
|
|
|
|
1. Of potatoes: |
|
|
|
|
(a) For food processing industry and household use |
0,51 + vc with maximum of N. Kr. 0,51 per kg |
0,17 + vc (2) |
|
|
(b) Other |
0,51 |
0 |
|
|
2. Other |
0,51 |
0 |
|
|
B. Other |
0,51 |
0 |
|
|
ex 35.06 |
Prepared glues not elsewhere specified or included; products suitable for use as glues put up for sale by retail as glues in packages not exceeding a net weight of 1 kg: |
|
|
|
— Based on emulsions of natriumsilicate |
12,5 % |
0 |
|
|
ex 35.07 |
Enzymes; prepared enzymes not elsewhere specified or included: |
|
|
|
— Prepared enzymes containing foodstuffs |
30 % |
0 (1) |
|
|
ex 38.12 |
Prepared glazings, prepared dressings and prepared mordants, of a kind used in the textile, paper, leather or like industries: |
|
|
|
— Starch based |
0,51 |
0 (1) |
|
|
ex 38.19 |
Chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: |
|
|
|
— Foundry core binders based on artificial resins |
0,10 |
0 |
|
|
— Products of sorbitol cracking |
15 % |
0 |
|
|
ex 39.02 |
Polymerization and copolymerization products (for example, polyethylene, polytetrahaloethylenes, polyisobutylene, polystyrene, polyvinyl chloride, polyvinyl acetate, polyvinyl chloroacetate and other polyvinyl derivatives, poly acrylic and polymethacrylic derivatives, coumarone-indene resins): |
|
|
|
— Glues based on resin emulsions |
10—20 % |
0 |
|
|
ex 39.06 |
Other high polymers, artificial resins and artificial plastic materials, including alginic acid, its salts and esters; linoxyn: |
|
|
|
— Other high polymers, artificial resins and artificial plastic materials, their salts and esters, except alginic acid and its salts and esters |
15 % |
0 |
|
|
(1)
Norway reserves the right to choose the system to be applied in order to take account of the differences in the prices of basic agricultural products.
(2)
As an exception to the provisions of Article 2 (1) and (2) of Protocol No 2, the Joint Committee shall decide how the reductions for this heading are to be implemented and the date of the first reduction. |
|||
Note: The Abbreviation vc appearing in this list means ‘variable component’.
PROTOCOL No 3
concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation
Article 1
Applicable rules of origin
Article 2
Alternative applicable rules of origin
Article 3
Dispute settlement
Article 4
Amendments to the Protocol
The Joint Committee may decide to amend the provisions of this Protocol.
Article 5
Withdrawal from the Convention
Appendix A
ALTERNATIVE APPLICABLE RULES OF ORIGIN
Rules for optional application among Contracting Parties to the Regional Convention on pan-Euro-Mediterranean preferential rules of origin, pending the conclusion and entry into force of the amendment of the Convention
(‘the Rules’ or ‘the Transitional rules’)
DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’ AND METHODS OF ADMINISTRATIVE COOPERATION
|
TABLE OF CONTENTS |
|
|
OBJECTIVES |
|
|
TITLE I |
GENERAL PROVISIONS |
|
Article 1 |
Definitions |
|
TITLE II |
DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’ |
|
Article 2 |
General requirements |
|
Article 3 |
Wholly obtained products |
|
Article 4 |
Sufficient working or processing |
|
Article 5 |
Tolerance rule |
|
Article 6 |
Insufficient working or processing |
|
Article 7 |
Cumulation of origin |
|
Article 8 |
Conditions for the application of cumulation of origin |
|
Article 9 |
Unit of qualification |
|
Article 10 |
Sets |
|
Article 11 |
Neutral elements |
|
Article 12 |
Accounting segregation |
|
TITLE III |
TERRITORIAL REQUIREMENTS |
|
Article 13 |
Principle of territoriality |
|
Article 14 |
Non-alteration |
|
Article 15 |
Exhibitions |
|
TITLE IV |
DRAWBACK OR EXEMPTION |
|
Article 16 |
Drawback of or exemption from customs duties |
|
TITLE V |
PROOF OF ORIGIN |
|
Article 17 |
General requirements |
|
Article 18 |
Conditions for making out an origin declaration |
|
Article 19 |
Approved exporter |
|
Article 20 |
Procedure for issue of a movement certificate EUR.1 |
|
Article 21 |
Movement certificates EUR.1 issued retrospectively |
|
Article 22 |
Issue of a duplicate movement certificate EUR.1 |
|
Article 23 |
Validity of proof of origin |
|
Article 24 |
Free zones |
|
Article 25 |
Importation requirements |
|
Article 26 |
Importation by instalments |
|
Article 27 |
Exemption from proof of origin |
|
Article 28 |
Discrepancies and formal errors |
|
Article 29 |
Supplier's declarations |
|
Article 30 |
Amounts expressed in euro |
|
TITLE VI |
PRINCIPLES OF COOPERATION AND DOCUMENTARY EVIDENCE |
|
Article 31 |
Documentary evidence, preservation of proofs of origin and supporting documents |
|
Article 32 |
Dispute settlement |
|
TITLE VII |
ADMINISTRATIVE COOPERATION |
|
Article 33 |
Notification and cooperation |
|
Article 34 |
Verification of proofs of origin |
|
Article 35 |
Verification of supplier's declarations |
|
Article 36 |
Penalties |
|
TITLE VIII |
APPLICATION OF APPENDIX A |
|
Article 37 |
European Economic Area |
|
Article 38 |
Liechtenstein |
|
Article 39 |
Republic of San Marino |
|
Article 40 |
Principality of Andorra |
|
Article 41 |
Ceuta and Melilla |
|
List of Annexes |
|
|
ANNEX I: |
Introductory notes to the list in Annex II |
|
ANNEX II: |
List of working or processing required to be carried out on non-originating materials in order for the product manufactured to obtain originating status |
|
ANNEX III: |
Text of the origin declaration |
|
ANNEX IV: |
Specimens of movement certificate EUR.1 and application for a movement certificate EUR.1 |
|
ANNEX V: |
Special conditions concerning products originating in Ceuta and Melilla |
|
ANNEX VI: |
Supplier's declaration |
|
ANNEX VII: |
Long-term supplier's declaration |
OBJECTIVES
These Rules are optional. They are intended to apply on a provisional basis, pending the conclusion and entry into force of the amendment of the Regional Convention on pan-Euro-Mediterranean preferential rules of origin (‘PEM Convention’ or ‘Convention’). These Rules will apply bilaterally to trade between those Contracting Parties that agree to refer to them or include them in their bilateral preferential trade agreements. These Rules are intended to apply as an alternative to the rules of the Convention, which, as provided by the Convention, are without prejudice to the principles laid down in the relevant agreements and other related bilateral agreements among Contracting Parties. Accordingly, these Rules will not be mandatory, but optional. They may be applied by economic operators that desire to claim preferences based on these Rules instead of on the basis of the rules of the Convention.
These Rules are not intended to modify the Convention. The Convention continues to apply in full between the Contracting Parties to the Convention. These Rules will not alter the rights and obligations of the Contracting Parties under the Convention.
TITLE I
GENERAL PROVISIONS
Article 1
Definitions
For the purposes of these Rules:
‘applying Contracsting Party’ means a Contracting Party to the PEM Convention that incorporates these Rules in its bilateral preferential trade agreements with another Contracting Party to the PEM Convention and includes the Parties to the Agreement;
‘chapters’, ‘headings’ and ‘subheadings’ mean the chapters, the headings and the subheadings (four- or six-digit codes) used in the nomenclature which makes up the Harmonized Commodity Description and Coding System (‘Harmonised System’) with the changes pursuant to the Recommendation of 26 June 2004 of the Customs Cooperation Council;
‘classified’ means the classification of a good under a particular heading or subheading of the Harmonised System;
‘consignment’ means products which are either:
sent simultaneously from one exporter to one consignee; or
covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice;
‘customs authorities of the Party or applying Contracting Party’ for the European Union means any of the customs authorities of the Member States of the European Union;
‘customs value’ means the value as determined in accordance with the Agreement on implementation of Article VII of the General Agreement on Tariffs and Trade 1994 (WTO Agreement on Customs Valuation);
‘ex-works price’ means the price paid for the product ex works to the manufacturer in the Party in whose undertaking the last working or processing is carried out, provided that the price includes the value of all the materials used and all other costs related to its production, minus any internal taxes which are, or may be, repaid when the product obtained is exported. Where the last working or processing has been subcontracted to a manufacturer, the term ‘manufacturer’ refers to the enterprise that has employed the subcontractor.
Where the actual price paid does not reflect all costs related to the manufacturing of the product which are actually incurred in the Party, the ex-works price means the sum of all those costs, minus any internal taxes which are, or may be, repaid when the product obtained is exported;
‘fungible material’ or ‘fungible product’ means material or product that is of the same kind and commercial quality, with the same technical and physical characteristics, and which cannot be distinguished from one another;
‘goods’ means both material and product;
‘manufacture’ means any kind of working or processing, including assembly;
‘material’ means any ingredient, raw material, component or part, etc., used in the manufacture of the product;
‘maximum content of non-originating materials’ means the maximum content of non-originating materials which is permitted in order to consider a manufacture to be working or processing sufficient to confer originating status on the product. It may be expressed as a percentage of the ex-works price of the product or as a percentage of the net weight of these materials used falling under a specified group of chapters, chapter, heading or subheading;
‘product’ means the product being manufactured, even if it is intended for later use in another manufacturing operation;
‘territory’ includes the land territory, internal waters and the territorial sea of a Party;
‘value added’ shall be taken to be the ex-works price of the product minus the customs value of each of the materials incorporated which originate in the other applying Contracting Parties with which cumulation is applicable or, where the customs value is not known or cannot be ascertained, the first ascertainable price paid for the materials in the exporting Party;
‘value of materials’ means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the exporting Party. Where the value of the originating materials used needs to be established, this point shall be applied mutatis mutandis.
TITLE II
DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’
Article 2
General requirements
For the purpose of implementing the Agreement, the following products shall be considered as originating in a Party when exported to the other Party:
products wholly obtained in a Party, within the meaning of Article 3;
products obtained in a Party incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in that Party within the meaning of Article 4.
Article 3
Wholly obtained products
The following shall be considered as wholly obtained in a Party when exported to the other Party:
mineral products and natural water extracted from its soil or from its seabed;
plants, including aquatic plants, and vegetable products grown or harvested there;
live animals born and raised there;
products from live animals raised there;
products from slaughtered animals born and raised there;
products obtained by hunting or fishing conducted there;
products of aquaculture where the fish, crustaceans, molluscs and other aquatic invertebrates are born or raised there from eggs, larvae, fry or fingerlings;
products of sea fishing and other products taken from the sea outside any territorial sea by its vessels;
products made on board its factory ships exclusively from products referred to in point (h);
used articles collected there fit only for the recovery of raw materials;
waste and scrap resulting from manufacturing operations conducted there;
products extracted from the seabed or below the seabed which is situated outside its territorial sea but where it has exclusive exploitation rights;
goods produced there exclusively from the products specified in points (a) to (l).
The terms ‘its vessels’ and ‘its factory ships’ in points (h) and (i) of paragraph 1 respectively shall apply only to vessels and factory ships which meet each of the following requirements:
they are registered in the exporting or the importing Party;
they sail under the flag of the exporting or the importing Party;
they meet one of the following conditions:
they are at least 50 % owned by nationals of the exporting or the importing Party; or
they are owned by companies which:
Article 4
Sufficient working or processing
However, where the relevant rule is based on compliance with a maximum content of non-originating materials, the customs authorities of the Parties may authorise exporters to calculate the ex-works price of the product and the value of the non-originating materials on an average basis as set out in paragraph 4, in order to take into account the fluctuations in costs and currency rates.
Article 5
Tolerance rule
By way of derogation from Article 4 and subject to paragraphs 2 and 3 of this Article, non-originating materials which, according to the conditions set out in the list in Annex II, are not to be used in the manufacture of a given product may nevertheless be used, provided that their total net weight or value assessed for the product does not exceed:
15 % of the net weight of the product falling within Chapters 2 and 4 to 24, other than processed fishery products of Chapter 16;
15 % of the ex-works price of the product for products other than those covered by point (a).
This paragraph shall not apply to products falling within Chapters 50 to 63 of the Harmonised System, for which the tolerances mentioned in Notes 6 and 7 of Annex I shall apply.
Article 6
Insufficient working or processing
Without prejudice to paragraph 2 of this Article, the following operations shall be considered to be insufficient working or processing to confer the status of an originating product, whether or not the requirements of Article 4 are satisfied:
preserving operations to ensure that the products remain in good condition during transport and storage;
breaking-up and assembly of packages;
washing, cleaning; removal of dust, oxide, oil, paint or other coverings;
ironing or pressing of textiles;
simple painting and polishing operations;
husking and partial or total milling of rice; polishing, and glazing of cereals and rice;
operations to colour or flavour sugar or form sugar lumps; partial or total milling of crystal sugar;
peeling, stoning and shelling, of fruits, nuts and vegetables;
sharpening, simple grinding or simple cutting;
sifting, screening, sorting, classifying, grading, matching; (including the making-up of sets of articles);
simple placing in bottles, cans, flasks, bags, cases, boxes, fixing on cards or boards and all other simple packaging operations;
affixing or printing marks, labels, logos and other like distinguishing signs on products or their packaging;
simple mixing of products, whether or not of different kinds;
mixing of sugar with any material;
simple addition of water or dilution or dehydratation or denaturation of products;
simple assembly of parts of articles to constitute a complete article or disassembly of products into parts;
slaughter of animals;
a combination of two or more operations specified in points (a) to (q).
Article 7
Cumulation of origin
For the purpose of this paragraph, the participants in the European Union's Stabilisation and Association process and the Republic of Moldova are to be considered as one applying Contracting Party.
Article 8
Conditions for the application of cumulation of origin
The cumulation provided for in Article 7 may be applied only provided that:
a preferential trade agreement in accordance with Article XXIV of the General Agreement on Tariffs and Trade 1994 (GATT) is applicable between the applying Contracting Parties involved in the acquisition of the originating status and the applying Contracting Party of destination; and
goods have obtained originating status by the application of rules of origin identical to those given in these Rules.
The cumulation provided for in Article 7 shall apply from the date indicated in those notices.
The Parties shall provide the European Commission with details of the relevant agreements concluded with other applying Contracting Parties, including the dates of entry into force of these Rules.
In cases where a movement certificate EUR.1 is used as a proof of origin, that statement shall be made in Box 7 of the movement certificate EUR.1.
The Parties shall notify the waiver to the European Commission in accordance with Article 8(2).
Article 9
Unit of qualification
The unit of qualification for the application of these Rules shall be the particular product which is considered to be the basic unit when determining classification using the nomenclature of the Harmonised System. It follows that:
when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole constitutes the unit of qualification;
when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each individual item shall be taken into account when applying these Rules.
Article 10
Sets
Sets, as defined in General Rule 3 of the Harmonised System, shall be regarded as originating when all the component products are originating.
When a set is composed of originating and non-originating products, the set as a whole shall however be regarded as originating, provided that the value of the non-originating products does not exceed 15 % of the ex-works price of the set.
Article 11
Neutral elements
In order to determine whether a product is an originating product, no account shall be taken of the origin of the following which might be used in its manufacture:
energy and fuel;
plant and equipment;
machines and tools;
any other goods which do not enter, and which are not intended to enter, into the final composition of the product.
Article 12
Accounting segregation
Through the use of accounting segregation it must be ensured that, at any time, no more products can be considered as ‘originating in the exporting Party’ than would have been the case if a method of physical segregation of the stocks had been used.
The method shall be applied and the application thereof shall be recorded on the basis of the general accounting principles applicable in the exporting Party.
TITLE III
TERRITORIAL REQUIREMENTS
Article 13
Principle of territoriality
If originating products exported from a Party to another country are returned, they shall be considered to be non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that:
the products returned are the same as those which were exported; and
they have not undergone any operations beyond that necessary to preserve them in good condition while in that country or while being exported.
The obtention of originating status in accordance with the conditions set out in Title II shall not be affected by working or processing done outside the exporting Party on materials exported from this Party and subsequently re-imported there, provided:
those materials are wholly obtained in the exporting Party or have undergone working or processing beyond the operations referred to in Article 6 prior to being exported; and
it can be demonstrated to the satisfaction of the customs authorities that:
the re-imported products have been obtained by working or processing the exported materials; and
the total added value acquired outside the exporting Party by applying this Article does not exceed 10 % of the ex-works price of the end product for which originating status is claimed.
Article 14
Non-alteration
In the case of doubt, the importing Party may request the importer or its representative to submit at any time all appropriate documents to provide evidence of compliance with this Article, which may be given by any documentary evidence, and notably by:
contractual transport documents such as bills of lading;
factual or concrete evidence based on marking or numbering of packages;
a certificate of non-manipulation provided by the customs authorities of the country(ies) of transit or splitting or any other documents demonstrating that the goods remained under customs supervision in the country(ies) of transit or splitting; or
any evidence related to the goods themselves.
Article 15
Exhibitions
Originating products, sent for exhibition in a country other than with which cumulation is applicable in accordance with Articles 7 and 8 and sold after the exhibition for importation in a Party, shall benefit on importation from the relevant agreement provided it is shown to the satisfaction of the customs authorities that:
an exporter has consigned the products from a Party to the country in which the exhibition is held and has exhibited them there;
the products have been sold or otherwise disposed of by that exporter to a person in another Party;
the products have been consigned during the exhibition or immediately thereafter in the state in which they were sent for exhibition; and
the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.
TITLE IV
DRAWBACK OR EXEMPTION
Article 16
Drawback of or exemption from customs duties
TITLE V
PROOF OF ORIGIN
Article 17
General requirements
Products originating in one of the Parties shall, on importation into the other Party, benefit from the provisions of the Agreement upon submission of one of the following proofs of origin:
a movement certificate EUR.1, a specimen of which appears in Annex IV to this Appendix;
in the cases specified in Article 18(1), a declaration, subsequently referred to as the ‘origin declaration’ given by the exporter on an invoice, a delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified; the text of the origin declaration appears in Annex III to this Appendix.
The use of a statement on origin made out by the exporters registered in an electronic database agreed by two or more applying Contracting Parties shall not impede the use of diagonal cumulation with other applying Contracting Parties.
Article 18
Conditions for making out an origin declaration
An origin declaration as referred to in point (b) of Article 17(1) may be made out:
by an approved exporter within the meaning of Article 19; or
by any exporter for any consignment consisting of one or more packages containing originating products the total value of which does not exceed EUR 6 000 .
Where the splitting of a consignment takes place in accordance with Article 14(3) and provided that the same two-year deadline is respected, the retrospective origin declaration shall be made out by the approved exporter of the exporting Party of the products.
Article 19
Approved exporter
Article 20
Procedure for issuing of a movement certificate EUR.1
Article 21
Movement certificates EUR.1 issued retrospectively
Notwithstanding Article 20(8), a movement certificate EUR.1 may be issued after exportation of the products to which it relates if:
it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances;
it is demonstrated to the satisfaction of the customs authorities that a movement certificate EUR.1 was issued but was not accepted at importation for technical reasons;
the final destination of the products concerned was not known at the time of exportation and was determined during their transportation or storage and after possible splitting of consignments in accordance with Article 14(3);
a movement certificate EUR.1 or EUR.MED was issued in accordance with the rules of the PEM Convention for products that are also originating in accordance with these Rules; the exporter shall take all necessary steps to ensure that the conditions to apply cumulation are fulfilled and be prepared to submit to the customs authorities all relevant documents proving that the product is originating in accordance with these Rules; or
a movement certificate EUR.1 was issued on the basis of Article 8(4) and the application of Article 8(3) is required at importation in another applying Contracting Party.
Article 22
Issue of a duplicate movement certificate EUR.1
Article 23
Validity of proof of origin
Article 24
Free zones
Article 25
Importation requirements
Proofs of origin shall be submitted to the customs authorities of the importing Party in accordance with the procedures applicable in that Party.
Article 26
Importation by instalments
Where, at the request of the importer and subject to the conditions laid down by the customs authorities of the importing Party, dismantled or non-assembled products within the meaning of General Rule 2(a) for the interpretation of the Harmonised System falling within Sections XVI and XVII or headings 7308 and 9406 are imported by instalments, a single proof of origin for such products shall be submitted to the customs authorities on importation of the first instalment.
Article 27
Exemptions from proof of origin
Imports shall not be considered as imports by way of trade if all the following conditions are met:
the imports are occasional;
the imports consist solely of products for the personal use of the recipients or travellers or their families;
it is evident from the nature and quantity of the products that no commercial purpose is in view.
The total value of those products shall not exceed EUR 500 in the case of small packages or EUR 1 200 in the case of products forming part of travellers' personal luggage.
Article 28
Discrepancies and formal errors
Article 29
Supplier's declarations
Article 30
Amounts expressed in euro
TITLE VI
PRINCIPLES OF COOPERATION AND DOCUMENTARY EVIDENCE
Article 31
Documentary evidence, preservation of proofs of origin and supporting documents
The supplier making out a long-term supplier's declaration shall keep copies of the declaration and of all the invoices, delivery notes or other commercial documents concerning goods covered by that declaration sent to the customer concerned, as well as the documents referred to in Article 29(6) for at least three years. That period shall begin from the date of expiry of validity of the long-term supplier's declaration.
For the purposes of paragraph 1 of this Article, the documents supporting the originating status, inter alia, are the following:
direct evidence of the processes carried out by the exporter or supplier to obtain the product, contained, for example, in his accounts or internal bookkeeping;
documents proving the originating status of materials used, issued or made out in the relevant applying Contracting Party in accordance with its national legislation;
documents proving the working or processing of materials in the relevant Party, made out or issued in that Party in accordance with its national legislation;
origin declarations or movement certificates EUR.1 proving the originating status of materials used, made out or issued in the Parties in accordance with these Rules;
appropriate evidence concerning working or processing undergone outside the Parties by application of Articles 13 and 14, proving the fulfilment of the requirements of those Articles.
Article 32
Dispute settlement
Where disputes arise in relation to the verification procedures under Articles 34 and 35, or in relation to the interpretation of this Appendix, which cannot be settled between the customs authorities requesting a verification and the customs authorities responsible for carrying out the verification, they shall be submitted to the Joint Committee.
In all cases the settlement of disputes between the importer and the customs authorities of the importing Party shall take place in accordance with the legislation of that country.
TITLE VII
ADMINISTRATIVE COOPERATION
Article 33
Notification and cooperation
Article 34
Verification of proofs of origin
Article 35
Verification of supplier's declarations
They shall forward, in support of the request for subsequent verification, any documents and information that have been obtained suggesting that the information given in the supplier's declaration or the long-term supplier's declaration is incorrect.
Article 36
Penalties
Each Party shall provide for the imposition of criminal, civil or administrative penalties for violations of its national legislation related to these Rules.
TITLE VIII
APPLICATION OF APPENDIX A
Article 37
European Economic Area
Goods originating in the European Economic Area (EEA) within the meaning of Protocol 4 to the Agreement on the European Economic Area shall be considered as originating in the European Union, Iceland, Liechtenstein or Norway (the ‘EEA Parties’) when exported respectively from the European Union, Iceland, Liechtenstein or Norway to an applying Contracting Party, provided that free trade agreements using these Rules are applicable between the importing applying Contracting Party and the EEA Parties.
Article 38
Liechtenstein
Without prejudice to Article 2, a product originating in Liechtenstein shall, due to the customs union between Switzerland and Liechtenstein, be considered as originating in Switzerland.
Article 39
Republic of San Marino
Without prejudice to Article 2, a product originating in the Republic of San Marino shall, due to the customs union between the European Union and the Republic of San Marino, be considered as originating in the European Union.
Article 40
Principality of Andorra
Without prejudice to Article 2, a product originating in the Principality of Andorra classified under Chapters 25 to 97 of the Harmonised System shall, due to the customs union between the European Union and the Principality of Andorra, be considered as originating in the European Union.
Article 41
Ceuta and Melilla
ANNEX I
INTRODUCTORY NOTES TO THE LIST IN ANNEX II
Note 1 – General introduction
The list sets out the conditions required for all products to be considered as sufficiently worked or processed within the meaning of Article 4 of Title II of this Appendix. There are four different types of rules, which vary according to the product:
through working or processing a maximum content of non-originating materials is not exceeded;
through working or processing the 4-digit Harmonised System heading or 6-digit Harmonised System subheading of the manufactured products becomes different from the 4-digit Harmonised System heading or 6-digit subheading respectively of the materials used;
a specific working or processing operation is carried out;
working or processing is carried out on certain wholly obtained materials.
Note 2 – The structure of the list
2.1. The first two columns in the list describe the product obtained. The column (1) gives the heading number or chapter number used in the Harmonised System and the column (2) gives the description of goods used in that system for that heading or chapter. For each entry in the first two columns, a rule is specified in column (3). Where, in some cases, the entry in the column (1) is preceded by an ‘ex’, this signifies that the rules in column (3) apply only to the part of that heading as described in column (2).
2.2. Where several heading numbers are grouped together in column (1) or a chapter number is given and the description of products in column (2) is therefore given in general terms, the adjacent rules in column (3) apply to all products which, under the Harmonised System, are classified in headings of the chapter or in any of the headings grouped together in column (1).
2.3. Where there are different rules in the list applying to different products within a heading, each indent contains the description of that part of the heading covered by the adjacent rules in column (3).
2.4. Where two alternative rules are set out in column (3), separated by ‘or’, it is at the choice of the exporter which one to use.
Note 3 – Examples of how to apply the rules
3.1. Article 4 of Title II of this Appendix, concerning products having obtained originating status which are used in the manufacture of other products, shall apply, regardless of whether that status has been obtained inside the factory where those products are used or in another factory in a Party.
3.2. Pursuant to Article 6 of Title II of this Appendix , the working or processing carried out must go beyond the list of operations mentioned in that Article. If it does not, the goods shall not qualify for the granting of the benefit of preferential tariff treatment, even if the conditions set out in the list below are met.
Subject to Article 6 of Title II of this Appendix, the rules in the list represent the minimum amount of working or processing required, and the carrying-out of more working or processing also confers originating status; conversely, the carrying-out of less working or processing cannot confer originating status.
Thus, if a rule provides that non-originating material, at a certain level of manufacture, may be used, the use of such material at an earlier stage of manufacture is allowed, and the use of such material at a later stage is not.
If a rule provides that non-originating material, at a certain level of manufacture, may not be used, the use of materials at an earlier stage of manufacture is allowed, and the use of materials at a later stage is not.
Example: when the list-rule for Chapter 19 requires that ‘non-originating materials of headings 1101 to 1108 cannot exceed 20 % weight’, the use (i.e. importation) of cereals of Chapter 10 (materials at an earlier stage of manufacture) is not limited.
3.3. Without prejudice to Note 3.2, where a rule uses the expression ‘Manufacture from materials of any heading’, then materials of any heading(s) (even materials of the same description and heading as the product) may be used, subject, however, to any specific limitations which may also be contained in the rule.
However, the expression ‘Manufacture from materials of any heading, including other materials of heading …’ or ‘Manufacture from materials of any heading, including other materials of the same heading as the product’ means that materials of any heading(s) may be used, except those of the same description as the product as given in column (2) of the list.
3.4. When a rule in the list specifies that a product may be manufactured from more than one material, this means that one or more materials may be used. It does not require that all be used.
3.5. Where a rule in the list specifies that a product must be manufactured from a particular material, the condition does not prevent the use of other materials which, because of their inherent nature, cannot satisfy this.
3.6. Where, in a rule in the list, two percentages are given for the maximum value of non-originating materials that can be used, then those percentages may not be added together. In other words, the maximum value of all the non-originating materials used may never exceed the higher of the percentages given. Furthermore, the individual percentages shall not be exceeded, in relation to the particular materials to which they apply.
Note 4 – General provisions concerning certain agricultural goods
4.1. Agricultural goods falling within Chapters 6, 7, 8, 9, 10, 12 and heading 2401 which are grown or harvested in the territory of a Party shall be treated as originating in the territory of that Party, even if grown from imported seeds, bulbs, rootstock, cuttings, grafts, shoots, buds, or other live parts of plants.
4.2. In cases where the content of non-originating sugar in a given product is subject to limitations, the weight of sugars of headings 1701 (sucrose) and 1702 (e.g., fructose, glucose, lactose, maltose, isoglucose or invert sugar) used in the manufacture of the final product and used in the manufacture of the non-originating products incorporated in the final product is taken into account for the calculation of such limitations.
Note 5 – Terminology used in respect of certain textile products
5.1. The term ‘natural fibres’ is used in the list to refer to fibres other than artificial or synthetic fibres. It is restricted to the stages before spinning takes place, including waste, and, unless otherwise specified, includes fibres which have been carded, combed or otherwise processed, but not spun.
5.2. The term ‘natural fibres’ includes horsehair of heading 0511 , silk of headings 5002 and 5003 , as well as wool-fibres and fine or coarse animal hair of headings 5101 to 5105 , cotton fibres of headings 5201 to 5203 , and other vegetable fibres of headings 5301 to 5305 .
5.3. The terms ‘textile pulp’, ‘chemical materials’ and ‘paper-making materials’ are used in the list to describe the materials, not classified in Chapters 50 to 63, which can be used to manufacture artificial, synthetic or paper fibres or yarns.
5.4. The term ‘man-made staple fibres’ is used in the list to refer to synthetic or artificial filament tow, staple fibres or waste, of headings 5501 to 5507 .
5.5. Printing (when combined with Weaving, Knitting/Crocheting, Tufting or Flocking) is defined as a technique by which an objectively assessed function, like colour, design, technical performance, is given to a textile substrate with a permanent character, using screen, roller, digital or transfer techniques.
5.6. Printing (as standalone operation) is defined as a technique by which an objectively assessed function, like colour, design, technical performance, is given to a textile substrate with a permanent character, using screen, roller, digital or transfer techniques combined with at least two preparatory/finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product.
Note 6 – Tolerances applicable to products made of a mixture of textile materials
6.1. Where, for a given product in the list, reference is made to this Note, the conditions set out in column (3) shall not be applied to any basic textile materials used in the manufacture of that product and which, taken together, represent 15 % or less of the total weight of all the basic textile materials used (See also Notes 6.3 and 6.4).
6.2. However, the tolerance mentioned in Note 6.1 may be applied only to mixed products which have been made from two or more basic textile materials.
The following are the basic textile materials:
6.3. In the case of products incorporating ‘yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped’, this tolerance is 20 % in respect of this yarn.
6.4. In the case of products incorporating ‘strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of a transparent or coloured adhesive between two layers of plastic film’, this tolerance is 30 % in respect of this strip.
Note 7 – Other tolerances applicable to certain textile products
7.1. Where, in the list, reference is made to this Note, textile materials (with the exception of linings and interlinings) which do not satisfy the rule set out in the list in column (3) for the made-up product concerned may be used, provided that they are classified in a heading other than that of the product and that their value does not exceed 15 % of the ex-works price of the product.
7.2. Without prejudice to Note 7.3, materials which are not classified within Chapters 50 to 63 may be used freely in the manufacture of textile products, whether or not they contain textiles.
7.3. Where a percentage rule applies, the value of non-originating materials which are not classified within Chapters 50 to 63 must be taken into account when calculating the value of the non-originating materials incorporated.
Note 8 – Definition of specific processes and simple operations carried out in respect of certain products of Chapter 27
8.1. For the purposes of headings ex 27 07 and 2713 , the ‘specific processes’ are the following:
vacuum-distillation;
redistillation by a very thorough fractionation process;
cracking;
reforming;
extraction by means of selective solvents;
the process comprising all of the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite;
polymerisation;
alkylation;
isomerisation.
8.2. For the purposes of headings 2710 , 2711 and 2712 , the ‘specific processes’ are the following:
vacuum-distillation;
redistillation by a very thorough fractionation process;
cracking;
reforming;
extraction by means of selective solvents;
the process comprising all of the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite;
polymerisation;
alkylation;
isomerisation;
in respect of heavy oils of heading ex 27 10 only, desulphurisation with hydrogen, resulting in a reduction of at least 85 % of the sulphur content of the products processed (ASTM D 1266-59 T method);
in respect of products of heading 2710 only, deparaffining by a process other than filtering;
in respect of heavy oils of heading ex 27 10 only, treatment with hydrogen, at a pressure of more than 20 bar and a temperature of more than 250 °C, with the use of a catalyst, other than to effect desulphurisation, when the hydrogen constitutes an active element in a chemical reaction. The further treatment, with hydrogen, of lubricating oils of heading ex 27 10 (e.g. hydrofinishing or decolourisation), in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process;
in respect of fuel oils of heading ex 27 10 only, atmospheric distillation, on condition that less than 30 % of these products distils, by volume, including losses, at 300 °C, by the ASTM D 86 method;
in respect of heavy oils other than gas oils and fuel oils of heading ex 27 10 only, treatment by means of a high-frequency electrical brush discharge;
in respect of crude products (other than petroleum jelly, ozokerite, lignite wax or peat wax, paraffin wax containing by weight less than 0,75 % of oil) of heading ex 27 12 only, de-oiling by fractional crystallisation.
8.3. For the purposes of headings ex 27 07 and 2713 , simple operations, such as cleaning, decanting, desalting, water separation, filtering, colouring, marking, obtaining a sulphur content as a result of mixing products with different sulphur contents, or any combination of those operations or like operations, do not confer origin.
Note 9 – Definition of specific processes and operations carried out in respect of certain products
9.1. Products falling within Chapter 30 obtained in a Party by using cell cultures, shall be considered as originating in that Party. ‘Cell culture’ is defined as the cultivation of human, animal and plant cells under controlled conditions (such as defined temperatures, growth medium, gas mixture, pH) outside a living organism.
9.2. Products falling within Chapters 29 (except for: 2905.43-2905.44), 30, 32, 33 (except for: 3302.10, 3301), 34, 35 (except for: 35.01, 3502.11-3502.19, 3502.20, 35.05), 36, 37, 38 (except for: 3809.10, 38.23, 3824.60, 38.26) and 39 (except for: 39.16-39.26) obtained in a Party by fermentation shall be considered as originating in that Party. ‘Fermentation’ is a biotechnological process in which human, animal, plant cells, bacteria, yeasts, fungi or enzymes are used to produce products falling within Chapters 29 to 39.
9.3. The following processing operations are considered sufficient according to paragraph 1 of Article 4 for products falling within Chapters 28, 29 (except for: 2905.43-2905.44), 30, 32, 33 (except for: 3302.10, 3301), 34, 35 (except for: 35.01, 3502.11-3502.19, 3502.20, 35.05), 36, 37, 38 (except for: 3809.10, 38.23, 3824.60, 38.26) and 39 (except for: 39.16-39.26):
purification of a good resulting in the elimination of at least 80 % of the content of existing impurities; or
the reduction or elimination of impurities resulting in a good suitable for one or more of the following applications:
pharmaceutical, medicinal, cosmetic, veterinary, or food grade substances;
chemical products and reagents for analytical, diagnostic or laboratory uses;
elements and components for use in micro-electronics;
specialised optical uses;
biotechnical use (e.g., in cell culturing, in genetic technology, or as a catalyst);
carriers used in a separation process; or
nuclear grade uses.
ANNEX II
LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER FOR THE PRODUCT MANUFACTURED TO OBTAIN ORIGINATING STATUS
|
Heading |
Description of product |
Working or processing, carried out on non-originating materials, which confers originating status |
|
(1) |
(2) |
(3) |
|
Chapter 1 |
Live animals |
All the animals of Chapter 1 shall be wholly obtained |
|
Chapter 2 |
Meat and edible meat offal |
Manufacture in which all the meat and edible meat offal in the products of this Chapter is wholly obtained |
|
Chapter 3 |
Fish and crustaceans, molluscs and other aquatic invertebrates |
Manufacture in which all the materials of Chapter 3 used are wholly obtained |
|
Chapter 4 |
Dairy produce; birds' eggs; natural honey; edible products of animal origin, not elsewhere specified or included |
Manufacture in which all the materials of Chapter 4 used are wholly obtained |
|
ex Chapter 5 |
Products of animal origin, not elsewhere specified or included; except for: |
Manufacture from materials of any heading |
|
ex 0511 91 |
Inedible fish eggs and roes |
All the eggs and roes are wholly obtained |
|
Chapter 6 |
Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliage |
Manufacture in which all the materials of Chapter 6 used are wholly obtained |
|
Chapter 7 |
Edible vegetables and certain roots and tubers |
Manufacture in which all the materials of Chapter 7 used are wholly obtained |
|
Chapter 8 |
Edible fruit and nuts; peel of citrus fruits or melons |
Manufacture in which all the fruit, nuts and peels of citrus fruits or melons of Chapter 8 used are wholly obtained |
|
Chapter 9 |
Coffee, tea, maté and spices |
Manufacture from materials of any heading |
|
Chapter 10 |
Cereals |
Manufacture in which all the materials of Chapter 10 used are wholly obtained |
|
Chapter 11 |
Products of the milling industry; malt; starches; inulin; wheat gluten |
Manufacture in which all the materials of Chapters 8, 10 and 11, headings 0701 , 0714 , 2302 and 2303 , and subheading 0710 10 used are wholly obtained |
|
Chapter 12 |
Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder |
Manufacture from materials of any heading, except that of the product |
|
ex Chapter 13 |
Lac; gums, resins and other vegetable saps and extracts; except for: |
Manufacture from materials of any heading |
|
ex 13 02 |
Pectic substances, pectinates and pectates |
Manufacture from materials of any heading and in which the weight of sugar used does not exceed 40 % of the weight of the final product |
|
Chapter 14 |
Vegetable plaiting materials; vegetable products not elsewhere specified or included |
Manufacture from materials of any heading |
|
ex Chapter 15 |
Animal or vegetable fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes; except for: |
Manufacture from materials of any heading, except that of the product |
|
1504 to 1506 |
Fats and oils and their fractions, of fish or marine mammals; wool grease and fatty substances derived therefrom (including lanolin); other animal fats and oils and their fractions, whether or not refined, but not chemically modified |
Manufacture from materials of any heading |
|
1508 |
Groundnut oil and its fractions, whether or not refined, but not chemically modified |
Manufacture from materials of any subheading, except that of the product |
|
1509 and 1510 |
Olive oil and its fractions |
Manufacture in which all the vegetable materials used are wholly obtained |
|
1511 |
Palm oil and its fractions, whether or not refined, but not chemically modified |
Manufacture from materials of any subheading, except that of the product |
|
ex 15 12 |
Sunflower seed oils and their fractions: |
|
|
— for technical or industrial uses other than the manufacture of foodstuffs for human consumption |
Manufacture from materials of any heading, except that of the product |
|
|
— other |
Manufacture in which all the vegetable materials used are wholly obtained |
|
|
1515 |
Other fixed vegetable fats and oils (including jojoba oil) and their fractions, whether or not refined, but not chemically modified |
Manufacture from materials of any subheading, except that of the product |
|
ex 15 16 |
Fats and oils and their fractions, of fish |
Manufacture from materials of any heading |
|
1520 |
Glycerol, crude; glycerol waters and glycerol lyes |
Manufacture from materials of any heading |
|
Chapter 16 |
Preparations of meat, of fish or of crustaceans, molluscs or other aquatic invertebrates |
Manufacture in which all the materials of Chapter 2, 3 and 16 used are wholly obtained |
|
ex Chapter 17 |
Sugars and sugar confectionery; except for: |
Manufacture from materials of any heading, except that of the product |
|
1702 |
Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel: |
|
|
— Chemically-pure maltose and fructose |
Manufacture from materials of any heading, including other materials of heading 1702 |
|
|
— Other |
Manufacture from materials of any heading, except that of the product, in which the weight of the materials of heading 1101 to 1108 , 1701 and 1703 used does not exceed 30 % of the weight of the final product |
|
|
1704 |
Sugar confectionery (including white chocolate), not containing cocoa |
Manufacture from materials of any heading, except that of the product, in which: — the weight of sugar used does not exceed 40 % of the weight of the final product — or — the value of sugar used does not exceed 30 % of the ex-works price of the product |
|
ex Chapter 18 |
Cocoa and cocoa preparations; except for: |
Manufacture from materials of any heading, except that of the product, in which the weight of sugar used does not exceed 40 % of the weight of the final product |
|
ex 18 06 |
Chocolate and other food preparations containing cocoa; except for: |
Manufacture from materials of any heading, except that of the product, in which: — the weight of sugar used does not exceed 40 % of the weight of the final product — or — the value of sugar used does not exceed 30 % of the ex-works price of the product |
|
1806 10 |
Cocoa powder, containing added sugar or other sweetening matters |
Manufacture from materials of any heading, except that of the product, in which the weight of sugar used does not exceed 40 % of the weight of the final product |
|
1901 |
Malt extract; food preparations of flour, groats, meal, starch or malt extract, not containing cocoa or containing less than 40 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of headings 0401 to 0404 , not containing cocoa or containing less than 5 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included: |
|
|
— Malt extract |
Manufacture from cereals of Chapter 10 |
|
|
— Other |
Manufacture from materials of any heading, except that of the product, in which the individual weight of sugar and of the materials of Chapter 4 used does not exceed 40 % of the weight of the final product |
|
|
1902 |
Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared |
Manufacture from materials of any heading, except that of the product, in which: — the weight of the materials of headings 1006 and 1101 to 1108 used does not exceed 20% of the weight of the final product, and — the weight of the materials of Chapters 2, 3 and 16 used does not exceed 20 % of the weight of the final product |
|
1903 |
Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or similar forms |
Manufacture from materials of any heading, except potato starch of heading 1108 |
|
1904 |
Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals (other than maize (corn)) in grain form or in the form of flakes or other worked grains (except flour, groats and meal), pre-cooked or otherwise prepared, not elsewhere specified or included |
Manufacture from materials of any heading, except that of the product, in which: — the weight of the materials of headings 1006 and 1101 to 1108 used does not exceed 20 % of the weight of the final product, and — the weight of sugar used does not exceed 40 % of the weight of the final product |
|
1905 |
Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products |
Manufacture from materials of any heading, except that of the product, in which the weight of the materials of headings 1006 and 1101 to 1108 used does not exceed 20 % of the weight of the final product |
|
ex Chapter 20 |
Preparations of vegetables, fruit, nuts or other parts of plants; except for: |
Manufacture from materials of any heading, except that of the product |
|
2002 and 2003 |
Tomatoes, mushrooms and truffles prepared or preserved otherwise than by vinegar or acetic acid |
Manufacture from materials of any heading, except that of the product, in which all the materials of Chapter 7 used are wholly obtained |
|
2006 |
Vegetables, fruit, nuts, fruit-peel and other parts of plants, preserved by sugar (drained, glacé or crystallized) |
Manufacture from materials of any heading, except that of the product, in which the weight of sugar used does not exceed 40 % of the weight of the final product |
|
2007 |
Jams, fruit jellies, marmalades, fruit or nut purée and fruit or nut pastes, obtained by cooking, whether or not containing added sugar or other sweetening matter |
Manufacture from materials of any heading, except that of the product, in which the weight of sugar used does not exceed 40 % of the weight of the final product |
|
ex 20 08 |
Products, other than: — Nuts, not containing added sugar or spirits — Peanut butter; mixtures based on cereals; palm hearts; maize (corn) — Fruit and nuts cooked otherwise than by steaming or boiling in water, not containing added sugar, frozen |
Manufacture from materials of any heading, except that of the product, in which the weight of sugar used does not exceed 40 % of the weight of the final product |
|
2009 |
Fruit juices (including grape must) and vegetable juices, unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matter |
Manufacture from materials of any heading, except that of the product, in which the weight of sugar used does not exceed 40 % of the weight of the final product |
|
ex Chapter 21 |
Miscellaneous edible preparations; except for: |
Manufacture from materials of any heading, except that of the product |
|
2103 |
— Sauces and preparations therefor; mixed condiments and mixed seasonings — Mustard flour and meal and prepared mustard |
Manufacture from materials of any heading, except that of the product. However, mustard flour or meal or prepared mustard may be used Manufacture from materials of any heading |
|
2105 |
Ice cream and other edible ice, whether or not containing cocoa |
Manufacture from materials of any heading, except that of the product, in which: — the individual weight of sugar and of the materials of Chapter 4 used does not exceed 40 % of the weight of the final product — and — the total combined weight of sugar and of the materials of Chapter 4 used does not exceed 60 % of the weight of the final product |
|
2106 |
Food preparations not elsewhere specified or included |
Manufacture from materials of any heading, except that of the product, in which the weight of sugar used does not exceed 40 % of the weight of the final product |
|
ex Chapter 22 |
Beverages, spirits and vinegar; except for: |
Manufacture from materials of any heading, except that of the product, in which all the materials of subheadings 0806 10 , 2009 61 , 2009 69 used are wholly obtained |
|
2202 |
Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcoholic beverages, not including fruit or vegetable juices of heading 2009 |
Manufacture from materials of any heading, except that of the product |
|
2207 and 2208 |
Undenatured ethyl alcohol of an alcoholic strength by volume of higher or less than 80 % vol; spirits, liqueurs and other spirituous beverages |
Manufacture from materials of any heading, except heading 2207 or 2208 , in which all the materials of subheadings 0806 10 , 2009 61 , 2009 69 used are wholly obtained |
|
ex Chapter 23 |
Residues and waste from the food industries; prepared animal fodder; except for: |
Manufacture from materials of any heading, except that of the product |
|
2309 |
Preparations of a kind used in animal feeding |
Manufacture in which: — all the materials of Chapters 2 and 3 used are wholly obtained, — the weight of materials of Chapters 10 and 11 and headings 2302 and 2303 used does not exceed 20 % of the weight of the final product, — the individual weight of sugar and the materials of Chapter 4 used does not exceed 40 % of the weight of the final product, and — the total combined weight of sugar and the materials of Chapter 4 used does not exceed 50 % of the weight of the final product |
|
ex Chapter 24 |
Tobacco and manufactured tobacco substitutes; except for: |
Manufacture from materials of any heading in which the weight of materials of heading 2401 does not exceed 30 % of the total weight of materials of Chapter 24 used |
|
2401 |
Unmanufactured tobacco; tobacco refuse |
Manufacture in which all materials of heading 2401 are wholly obtained |
|
ex 24 02 |
Cigarettes, of tobacco or of tobacco substitutes |
Manufacture from materials of any heading, except that of the product and of smoking tobacco of subheading 2403 19 , in which at least 10 % by weight of all materials of heading 2401 used is wholly obtained |
|
ex 24 03 |
Products intended for inhalation through heated delivery or other means, without combustion |
Manufacture from materials of any heading, except that of the product, in which at least 10 % by weight of all materials of heading 2401 used is wholly obtained |
|
ex Chapter 25 |
Salt; sulphur; earths and stone; plastering materials, lime and cement; except for: |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product |
|
ex 25 19 |
Crushed natural magnesium carbonate (magnesite), in hermetically-sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesia |
Manufacture from materials of any heading, except that of the product. However, natural magnesium carbonate (magnesite) may be used |
|
Chapter 26 |
Ores, slag and ash |
Manufacture from materials of any heading, except that of the product |
|
ex Chapter 27 |
Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes; except for: |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex 27 07 |
Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 % by volume distils at a temperature of up to 250 °C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels |
Operations of refining and/or one or more specific process(es) (1) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product |
|
2710 |
Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils |
Operations of refining and/or one or more specific process(es) (1) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product |
|
2711 |
Petroleum gases and other gaseous hydrocarbons |
Operations of refining and/or one or more specific process(es) (1) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product |
|
2712 |
Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured |
Operations of refining and/or one or more specific process(es) (1) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product |
|
2713 |
Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous minerals |
Operations of refining and/or one or more specific process(es) (1) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product |
|
Chapter 28 |
Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes |
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex Chapter 29 |
Organic chemicals; except for: |
Specific process(es) (4) or Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex 29 01 |
Acyclic hydrocarbons for use as power or heating fuels |
Specific process(es) (4) or Operations of refining and/or one or more specific process(es) (1) or Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product |
|
ex 29 02 |
Cyclanes and cyclenes (other than azulenes), benzene, toluene, xylenes, for use as power or heating fuels |
Specific process(es) (4) or Operations of refining and/or one or more specific process(es) (1) or Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product |
|
ex 29 05 |
Metal alcoholates of alcohols of this heading and of ethanol |
Specific process(es) (4) or Manufacture from materials of any heading, including other materials of heading 2905 . However, metal alcoholates of this heading may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 30 |
Pharmaceutical products |
Specific process(es) (4) or Manufacture from materials of any heading |
|
Chapter 31 |
Fertilizers |
Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 32 |
Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks |
Specific process(es) (4) or Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 33 |
Essential oils and resinoids; perfumery, cosmetic or toilet preparations |
Specific process(es) (4) or Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 34 |
Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, ‘dental waxes’ and dental preparations with a basis of plaster |
Specific process(es) (4) or Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 35 |
Albuminoidal substances; modified starches; glues; enzymes |
Specific process(es) (4) or Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product |
|
Chapter 36 |
Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations |
Specific process(es) (4) or Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 37 |
Photographic or cinematographic goods |
Specific process(es) (4) or Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex Chapter 38 |
Miscellaneous chemical products; except for: |
Specific process(es) (4) or Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex 38 11 |
Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils: |
Specific process(es) (4) or |
|
— Prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals |
Manufacture in which the value of all the materials of heading 3811 used does not exceed 50 % of the ex-works price of the product |
|
|
ex 3824 99 and ex 3826 00 |
Biodiesel |
Manufacture in which biodiesel is obtained through transesterification and/or esterification or through hydro-treatment |
|
Chapter 39 |
Plastics and articles thereof |
Specific process(es) (4) or Manufacture from materials of any heading, except that of the product. However, materials of the same subheading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex Chapter 40 |
Rubber and articles thereof; except for: |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex 40 12 |
Retreaded pneumatic, solid or cushion tyres, of rubber |
Retreading of used tyres |
|
ex Chapter 41 |
Raw hides and skins (other than furskins) and leather; except for: |
Manufacture from materials of any heading, except that of the product |
|
4104 to 4106 |
Tanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared |
Re-tanning of tanned leather or Manufacture from materials of any heading, except that of the product |
|
Chapter 42 |
Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut) |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex Chapter 43 |
Furskins and artificial fur; manufactures thereof; except for: |
Manufacture from materials of any heading, except that of the product |
|
ex 43 02 |
Tanned or dressed furskins, assembled: |
|
|
— Plates, crosses and similar forms. |
Bleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins |
|
|
— Other |
Manufacture from non-assembled, tanned or dressed furskins |
|
|
4303 |
Articles of apparel, clothing accessories and other articles of furskin |
Manufacture from non-assembled tanned or dressed furskins of heading 4302 |
|
ex Chapter 44 |
Wood and articles of wood; wood charcoal; except for: |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex 44 07 |
Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or end-jointed |
Planing, sanding or end-jointing |
|
ex 44 08 |
Sheets for veneering (including those obtained by slicing laminated wood) and for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or end-jointed |
Splicing, planing, sanding or end-jointing |
|
ex 44 10 to ex 44 13 |
Beadings and mouldings, including moulded skirting and other moulded boards |
Beading or moulding |
|
ex 44 15 |
Packing cases, boxes, crates, drums and similar packings, of wood |
Manufacture from boards not cut to size |
|
ex 44 18 |
— Builders' joinery and carpentry of wood |
Manufacture from materials of any heading, except that of the product. However, cellular wood panels, shingles and shakes may be used |
|
— Beadings and mouldings |
Beading or moulding |
|
|
ex 44 21 |
Match splints; wooden pegs or pins for footwear |
Manufacture from wood of any heading, except drawn wood of heading 4409 |
|
Chapter 45 |
Cork and articles of cork |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 46 |
Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 47 |
Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 48 |
Paper and paperboard; articles of paper pulp, of paper or of paperboard |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 49 |
Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans |
Manufacture from materials of any heading except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex Chapter 50 |
Silk; except for: |
Manufacture from materials of any heading, except that of the product |
|
ex 50 03 |
Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock), carded or combed |
Carding or combing of silk waste |
|
5004 to ex 50 06 |
Silk yarn and yarn spun from silk waste |
Spinning of natural fibres or Extrusion of man-made continuous filament combined with spinning or Extrusion of man-made continuous filament combined with twisting or Twisting combined with any mechanical operation |
|
5007 |
Woven fabrics of silk or of silk waste |
Spinning of natural and/or man-made staple fibres combined with weaving or Extrusion of man-made filament yarn combined with weaving or Twisting or any mechanical operation combined with weaving or Weaving combined with dyeing or Yarn dyeing combined with weaving or Weaving combined with printing or Printing (as standalone operation) |
|
ex Chapter 51 |
Wool, fine or coarse animal hair; horsehair yarn and woven fabric; except for: |
Manufacture from materials of any heading, except that of the product |
|
5106 to 5110 |
Yarn of wool, of fine or coarse animal hair or of horsehair |
Spinning of natural fibres or Extrusion of man-made fibres combined with spinning or Twisting combined with any mechanical operation |
|
5111 to 5113 |
Woven fabrics of wool, of fine or coarse animal hair or of horsehair: |
Spinning of natural and/or man-made staple fibres combined with weaving or Extrusion of man-made filament yarn combined with weaving or Weaving combined with dyeing or Yarn dyeing combined with weaving or Weaving combined with printing or Printing (as standalone operation) |
|
ex Chapter 52 |
Cotton; except for: |
Manufacture from materials of any heading, except that of the product |
|
5204 to 5207 |
Yarn and thread of cotton |
Spinning of natural fibres or Extrusion of man-made fibres combined with spinning or Twisting combined with any mechanical operation |
|
5208 to 5212 |
Woven fabrics of cotton |
Spinning of natural and/or man-made staple fibres combined with weaving or Extrusion of man-made filament yarn combined with weaving or Twisting or any mechanical operation combined with weaving or Weaving combined with dyeing or with coating or with laminating or Yarn dyeing combined with weaving or Weaving combined with printing or Printing (as standalone operation) |
|
ex Chapter 53 |
Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for: |
Manufacture from materials of any heading, except that of the product |
|
5306 to 5308 |
Yarn of other vegetable textile fibres; paper yarn |
Spinning of natural fibres or Extrusion of man-made fibres combined with spinning or Twisting combined with any mechanical operation |
|
5309 to 5311 |
Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn: |
Spinning of natural and/or man-made staple fibres combined with weaving or Extrusion of man-made filament yarn combined with weaving or Weaving combined with dyeing or with coating or with laminating or Yarn dyeing combined with weaving or Weaving combined with printing or Printing (as standalone operation) |
|
5401 to 5406 |
Yarn, monofilament and thread of man-made filaments |
Spinning of natural fibres or Extrusion of man-made fibres combined with spinning or Twisting combined with any mechanical operation |
|
5407 and 5408 |
Woven fabrics of man-made filament yarn |
Spinning of natural and/or man-made staple fibres combined with weaving or Extrusion of man-made filament yarn combined with weaving or Twisting or any mechanical operation combined with weaving or Yarn dyeing combined with weaving or Weaving combined with dyeing or with coating or with laminating or Weaving combined with printing or Printing (as standalone operation) |
|
5501 to 5507 |
Man-made staple fibres |
Extrusion of man-made fibres |
|
5508 to 5511 |
Yarn and sewing thread of man-made staple fibres |
Spinning of natural fibres or Extrusion of man-made fibres combined with spinning or Twisting combined with any mechanical operation |
|
5512 to 5516 |
Woven fabrics of man-made staple fibres: |
Spinning of natural and/or man-made staple fibres combined with weaving or Extrusion of man-made filament yarn combined with weaving or Twisting or any mechanical operation combined with weaving or Weaving combined with dyeing or with coating or with laminating or Yarn dyeing combined with weaving or Weaving combined with printing or Printing (as standalone operation) |
|
ex Chapter 56 |
Wadding, felt and non-wovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for: |
Spinning of natural fibres or Extrusion of man-made fibres combined with spinning |
|
5601 |
Wadding of textile materials and articles thereof; textile fibres, not exceeding 5 mm in length (flock), textile dust and mill neps |
Spinning of natural fibres or Extrusion of man-made fibres combined with spinning or Flocking combined with dyeing or printing or Coating, flocking, laminating, or metalizing combined with at least two other main preparatory or finishing operations (such as calendering, shrink-resistance processes, heat setting, permanent finishing) provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
5602 |
Felt, whether or not impregnated, coated, covered or laminated: |
|
|
— Needleloom felt |
Extrusion of man-made fibres combined with fabric formation. However: — polypropylene filament of heading 5402 , — polypropylene fibres of heading 5503 or 5506 , or — polypropylene filament tow of heading 5501 , of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 % of the ex-works price of the product or Non-woven fabric formation alone in the case of felt made from natural fibres |
|
|
— Other |
Extrusion of man-made fibres combined with fabric formation or Non-woven fabric formation alone in the case of other felt made from natural fibres |
|
|
5603 |
Nonwovens whether or not impregnated, coated, covered or laminated |
|
|
5603 11 to 5603 14 |
Nonwovens whether or not impregnated, coated, covered or laminated of man-made filaments |
Manufacture from — directionally or randomly oriented filaments — or — substances or polymers of natural or man-made origin, — followed in both cases by bonding into a nonwoven |
|
5603 91 to 5603 94 |
Nonwovens whether or not impregnated, coated, covered or laminated, other than of man-made filaments |
Manufacture from — directionally or randomly oriented staple fibres — and/or — chopped yarns, of natural or man-made origin, — followed in both by bonding into a nonwoven |
|
5604 |
Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading 5404 or 5405 , impregnated, coated, covered or sheathed with rubber or plastics: |
|
|
— Rubber thread and cord, textile covered |
Manufacture from rubber thread or cord, not textile covered |
|
|
— Other |
Spinning of natural fibres or Extrusion of man-made fibres combined with spinning or Twisting combined with any mechanical operation |
|
|
5605 |
Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405 , combined with metal in the form of thread, strip or powder or covered with metal |
Spinning of natural and/or man-made staple fibres or Extrusion of man-made fibres combined with spinning or Twisting combined with any mechanical operation |
|
5606 |
Gimped yarn, and strip and the like of heading 5404 or 5405 , gimped (other than those of heading 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn |
Extrusion of man-made fibres combined with spinning or Twisting combined with gimping or Spinning of natural and/or man-made staple fibres or Flocking combined with dyeing |
|
Chapter 57 |
Carpets and other textile floor coverings: |
Spinning of natural and/or man-made staple fibres combined with weaving or with tufting or Extrusion of man-made filament yarn combined with weaving or with tufting or Manufacture from coir yarn or sisal yarn or jute yarn or classical ring spun viscose yarn or Tufting combined with dyeing or with printing or Flocking combined with dyeing or with printing or Extrusion of man-made fibres combined with non-woven techniques including needle punching Jute fabric may be used as a backing |
|
ex Chapter 58 |
Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery; except for: |
Spinning of natural and/or man-made staple fibres combined with weaving or tufting or Extrusion of man-made filament yarn combined with weaving or with tufting or Weaving combined with dyeing or with flocking or with coating or with laminating or with metalizing or Tufting combined with dyeing or with printing or Flocking combined with dyeing or with printing or Yarn dyeing combined with weaving or Weaving combined with printing or Printing (as standalone operation) |
|
5805 |
Hand-woven tapestries of the types Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up |
Manufacture from materials of any heading, except that of the product |
|
5810 |
Embroidery in the piece, in strips or in motifs |
Embroidering in which the value of all the materials of any heading, except that of the product, used does not exceed 50 % of the ex-works price of the product |
|
5901 |
Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations |
Weaving combined with dyeing or with flocking or with coating or with laminating or with metalizing or Flocking combined with dyeing or with printing |
|
5902 |
Tyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon: |
|
|
— Containing not more than 90 % by weight of textile materials |
Weaving |
|
|
— Other |
Extrusion of man-made fibres combined with weaving |
|
|
5903 |
Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902 |
Weaving combined with impregnating or with coating or with covering or with laminating or with metalizing or Weaving combined with printing or Printing (as standalone operation) |
|
5904 |
Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape |
Weaving combined with dyeing or with coating or with laminating or with metalizing Jute fabric may be used as a backing. |
|
5905 |
Textile wall coverings: — Impregnated, coated, covered or laminated with rubber, plastics or other materials |
Weaving, knitting or non-woven fabric formation combined with impregnating or with coating or with covering or with laminating or with metalizing |
|
— Other |
Spinning of natural and/or man-made staple fibres combined with weaving or Extrusion of man-made filament yarn combined with weaving or Weaving, knitting or non-woven fabric formation combined with dyeing or with coating or with laminating or Weaving combined with printing or Printing (as standalone operation) |
|
|
5906 |
Rubberised textile fabrics, other than those of heading 5902 : |
|
|
— Knitted or crocheted fabrics |
Spinning of natural and/or man-made staple fibres combined with knitting/crocheting or Extrusion of man-made filament yarn combined with knitting/crocheting or Knitting or crocheting combined with rubberising or Rubberising combined with at least two other main preparatory or finishing operations (such as calendering, shrink-resistance processes, heat setting, permanent finishing) provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
|
— Other fabrics made of synthetic filament yarn, containing more than 90 % by weight of textile materials |
Extrusion of man-made fibres combined with weaving |
|
|
— Other |
Weaving, knitting or non-woven process combined with dyeing or with coating/rubberising or Yarn dyeing combined with weaving, knitting or non-woven process or Rubberising combined with at least two other main preparatory or finishing operations (such as calendering, shrink-resistance processes, heat setting, permanent finishing) provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
|
5907 |
Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio back-cloths or the like |
Weaving or knitting or non-woven fabric formation combined with dyeing or with printing or with coating or with impregnating or with covering or Flocking combined with dyeing or with printing or Printing (as standalone operation) |
|
5908 |
Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefore, whether or not impregnated: |
|
|
— Incandescent gas mantles, impregnated |
Manufacture from tubular knitted/crocheted gas mantle fabric |
|
|
— Other |
Manufacture from materials of any heading, except that of the product |
|
|
5909 to 5911 |
Textile articles of a kind suitable for industrial use: |
Spinning of natural and/or of man-made staple fibres combined with weaving or Extrusion of man-made fibres combined with weaving or Weaving combined with dyeing or with coating or with laminating or Coating, flocking, laminating or metalizing combined with at least two other main preparatory or finishing operations (such as calendering, shrink-resistance processes, heat setting, permanent finishing) provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 60 |
Knitted or crocheted fabrics |
Spinning of natural and/or man-made staple fibres combined with knitting/crocheting or Extrusion of man-made filament yarn combined with knitting/crocheting or Knitting/crocheting combined with dyeing or with flocking or with coating or with laminating or with printing or Flocking combined with dyeing or with printing or Yarn dyeing combined with knitting/crocheting or Twisting or texturing combined with knitting/crocheting provided that the value of the non-twisted/non-textured yarns used does not exceed 50 % of the ex-works price of the product |
|
Chapter 61 |
Articles of apparel and clothing accessories, knitted or crocheted: |
|
|
— Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form |
Knitting or crocheting combined with making-up including cutting of fabric |
|
|
— Other |
Spinning of natural and/or man-made staple fibres combined with knitting or crocheting or Extrusion of man-made filament yarn combined with knitting or crocheting or Knitting and making-up in one operation |
|
|
ex Chapter 62 |
Articles of apparel and clothing accessories, not knitted or crocheted; except for: |
Weaving combined with making-up including cutting of fabric or Making-up including cutting of fabric preceded by printing (as standalone operation) |
|
ex 62 02 , ex 62 04 , ex 62 06 , ex 62 09 and ex 62 11 |
Women's, girls' and babies' clothing and clothing accessories for babies, embroidered |
Weaving combined with making-up including cutting of fabric or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product |
|
ex 62 10 and ex 62 16 |
Fire-resistant equipment of fabric covered with foil of aluminised polyester |
Weaving combined with making-up including cutting of fabric or Coating or laminating provided that the value of the uncoated or unlaminated fabric used does not exceed 40 % of the ex-works price of the product, combined with making-up including cutting of fabric |
|
ex 62 12 |
Brassieres, girdles, corsets, braces, suspenders, garters and similar articles and parts thereof, knitted or crocheted, obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form |
Knitting combined with making-up including cutting of fabric or Making-up including cutting of fabric preceded by printing (as standalone operation) |
|
6213 and 6214 |
Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like: |
|
|
— Embroidered |
Weaving combined with making-up including cutting of fabric or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product or Making-up including cutting of fabric preceded by printing (as standalone operation) |
|
|
— Other |
Weaving combined with making-up including cutting of fabric or Making-up preceded by printing (as standalone operation) |
|
|
6217 |
Other made up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212 : |
|
|
— Embroidered |
Weaving combined with making-up including cutting of fabric or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product or Making-up preceded by printing (as standalone operation) |
|
|
— Fire-resistant equipment of fabric covered with foil of aluminised polyester |
Weaving combined with making-up including cutting of fabric or Coating or laminating provided that the value of the uncoated or unlaminated fabric used does not exceed 40 % of the ex-works price of the product combined with making-up including cutting of fabric |
|
|
— Interlinings for collars and cuffs, cut out |
Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product |
|
|
— Other |
Weaving combined with making-up including cutting of fabric |
|
|
ex Chapter 63 |
Other made-up textile articles; sets; worn clothing and worn textile articles; rags; except for: |
Manufacture from materials of any heading, except that of the product |
|
6301 to 6304 |
Blankets, travelling rugs, bed linen etc.; curtains etc.; other furnishing articles: |
|
|
— Of felt, of nonwovens |
Non-woven fabric formation combined with making-up including cutting of fabric |
|
|
— Other: |
|
|
|
— Embroidered |
Weaving or knitting/crocheting combined with making-up including cutting of fabric or Manufacture from unembroidered fabric (other than knitted or crocheted), provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product |
|
|
— Other |
Weaving or knitting/crocheting combined with making-up including cutting of fabric |
|
|
6305 |
Sacks and bags, of a kind used for the packing of goods |
(2)Extrusion of man-made fibres or spinning of natural and/or man-made staple fibres, combined with weaving or with knitting and making-up including cutting of fabric |
|
6306 |
Tarpaulins, awnings and sunblinds; tents; sails for boats, sailboards or landcraft; camping goods: |
|
|
— Of nonwovens |
Non-woven fabric formation combined with making-up including cutting of fabric |
|
|
— Other |
Weaving combined with making-up including cutting of fabric |
|
|
6307 |
Other made-up articles, including dress patterns |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product |
|
6308 |
Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes, or similar textile articles, put up in packings for retail sale |
Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, no originating articles may be incorporated, provided that their total value does not exceed 15 % of the ex-works price of the set |
|
ex Chapter 64 |
Footwear, gaiters and the like; parts of such articles; except for: |
Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406 |
|
6406 |
Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable in-soles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof |
Manufacture from materials of any heading, except that of the product |
|
Chapter 65 |
Headgear and parts thereof |
Manufacture from materials of any heading, except that of the product |
|
Chapter 66 |
Umbrellas, sun umbrellas, walking-sticks, seat-sticks, whips, riding-crops, and parts thereof: |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 67 |
Prepared feathers and down and articles made of feathers or of down; artificial flowers; articles of human hair |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 68 |
Articles of stone, plaster, cement, asbestos, mica or similar materials |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product |
|
Chapter 69 |
Ceramic products |
Manufacture from materials of any heading, except that of the product |
|
ex Chapter 70 |
Glass and glassware |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
7010 |
Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass |
Manufacture from materials of any heading, except that of the product or Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product |
|
7013 |
Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018 ) |
Manufacture from materials of any heading, except that of the product |
|
ex Chapter 71 |
Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin; except for: |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product |
|
ex 71 02 , ex 71 03 and ex 71 04 |
Worked precious or semi-precious stones (natural, synthetic or reconstructed) |
Manufacture of materials of any subheading except that of the product |
|
7106 , 7108 and 7110 |
Precious metals: — Unwrought |
Manufacture from materials of any heading, except those of headings 7106 , 7108 and 7110 , or electrolytic, thermal or chemical separation of precious metals of heading 7106 , 7108 or 7110 , or fusion and/or alloying of precious metals of heading 7106 , 7108 or 7110 with each other or with base metals or purification |
|
— Semi-manufactured or in powder form |
Manufacture from unwrought precious metals |
|
|
ex 71 07 , ex 71 09 and ex 71 11 |
Metals clad with precious metals, semi-manufactured |
Manufacture from metals clad with precious metals, unwrought |
|
ex Chapter 72 |
Iron and steel; except for: |
Manufacture from materials of any heading, except that of the product |
|
7207 |
Semi-finished products of iron or non-alloy steel |
Manufacture from materials of heading 7201 , 7202 , 7203 , 7204 or 7205 |
|
7208 to 7212 |
Flat-rolled products of iron or non-alloy steel |
Manufacture from semi-finished materials of heading 7207 |
|
7213 to 7216 |
Bars and sections bars and rods, angles, shapes and sections of iron or non-alloy steel |
Manufacture from ingots or other primary forms of heading 7206 |
|
7217 |
Wire of iron or non-alloy steel |
Manufacture from semi-finished materials of heading 7207 |
|
7218 91 and 7218 99 |
Semi-finished products |
Manufacture from materials of heading 7201 , 7202 , 7203 , 7204 or 7205 |
|
7219 to 7222 |
Flat-rolled products, bars and rods, angles, shapes and sections of stainless steel |
Manufacture from ingots or other primary forms of heading 7218 |
|
7223 |
Wire of stainless steel |
Manufacture from semi-finished materials of heading 7218 |
|
7224 90 |
Semi-finished products |
Manufacture from materials of heading 7201 , 7202 , 7203 , 7204 or 7205 |
|
7225 to 7228 |
Flat-rolled products, hot-rolled bars and rods, in irregularly wound coils; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel |
Manufacture from ingots or other primary forms of heading 7206 , 7218 or 7224 |
|
7229 |
Wire of other alloy steel |
Manufacture from semi-finished materials of heading 7224 |
|
ex Chapter 73 |
Articles of iron or steel; except for: |
Manufacture from materials of any heading, except that of the product |
|
ex 73 01 |
Sheet piling |
Manufacture from materials of heading 7207 |
|
7302 |
Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails |
Manufacture from materials of heading 7206 |
|
7304 , 7305 and 7306 |
Tubes, pipes and hollow profiles, of iron or steel |
Manufacture from materials of heading 7206 to 7212 and 7218 or 7224 |
|
ex 73 07 |
Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts |
Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product |
|
7308 |
Structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel |
Manufacture from materials of any heading, except that of the product. However, welded angles, shapes and sections of heading 7301 may not be used |
|
ex 73 15 |
Skid chain |
Manufacture in which the value of all the materials of heading 7315 used does not exceed 50 % of the ex-works price of the product |
|
ex Chapter 74 |
Copper and articles thereof; except for: |
Manufacture from materials of any heading, except that of the product |
|
7403 |
Refined copper and copper alloys, unwrought |
Manufacture from materials of any heading |
|
7408 |
Copper wire |
Manufacture: — From materials of any heading, except that of the product, and — In which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 75 |
Nickel and articles thereof |
Manufacture from materials of any heading, except that of the product |
|
ex Chapter 76 |
Aluminium and articles thereof; except for: |
Manufacture: — From materials of any heading, except that of the product, and — In which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
7601 |
Unwrought aluminium |
Manufacture: — From materials of any heading, except that of the product, and — In which the value of all the materials used does not exceed 50 % of the ex-works price of the product or Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium |
|
7602 |
Aluminium waste or scrap |
Manufacture from materials of any heading, except that of the product |
|
ex 76 16 |
Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium |
Manufacture: — From materials of any heading, except that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; and — In which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 78 |
Lead and articles thereof |
Manufacture from materials of any heading, except that of the product |
|
Chapter 79 |
Zinc and articles thereof |
Manufacture from materials of any heading, except that of the product |
|
Chapter 80 |
Tin and articles thereof |
Manufacture from materials of any heading, except that of the product |
|
Chapter 81 |
Other base metals; cermets; articles thereof |
Manufacture from materials of any heading |
|
ex Chapter 82 |
Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for: |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8206 |
Tools of two or more of the headings 8202 to 8205 , put up in sets for retail sale |
Manufacture from materials of any heading, except those of headings 8202 to 8205 . However, tools of headings 8202 to 8205 may be incorporated into the set, provided that their total value does not exceed 15 % of the ex-works price of the set |
|
Chapter 83 |
Miscellaneous articles of base metal |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex Chapter 84 |
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8407 |
Spark-ignition reciprocating or rotary internal combustion piston engines |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8408 |
Compression-ignition internal combustion piston engines (diesel or semi-diesel engines |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8425 to 8430 |
Pulley tackle and hoists other than skip hoists; winches and capstans; jacks: Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane Fork-lift trucks; other works trucks fitted with lifting or handling equipment Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics) Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and roadrollers Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; piledrivers and pile extractors; snowploughs and snowblowers |
Manufacture from materials of any heading, except that of the product and heading 8431 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8444 to 8447 |
Machines for extruding, drawing, texturing or cutting man-made textile materials: Machines for preparing textile fibres; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft-winding) machines and machines for preparing textile yarns for use on the machines of heading 8446 or 8447 Weaving machines (looms): Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting |
Manufacture from materials of any heading, except that of the product and heading 8448 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8456 to 8465 |
Machine tools for working any material by removal of material Machining centres, unit construction machines (single station) and multi-station transfer machines, for working metal Lathes for removing metal Machine tools |
Manufacture from materials of any heading, except that of the product and heading 8466 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8470 to 8472 |
Calculating machines and pocket-size data-recording, reproducing and displaying machines with calculating functions; accounting machines, postage- franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash registers Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data Other office machines |
Manufacture from materials of any heading, except that of the product and heading 8473 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex Chapter 85 |
Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8501 to 8502 |
Electric motors and generators Electric generating sets and rotary converters |
Manufacture from materials of any heading, except that of the product and heading 8503 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8519 , 8521 |
Sound recording or sound reproducing apparatus Video recording or reproducing apparatus, whether or not incorporating a video tuner |
Manufacture from materials of any heading, except that of the product and heading 8522 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8525 to 8528 |
Transmission apparatus for radio-broadcasting or television, television cameras, digital cameras and video camera recorders Radar apparatus, radio navigational aid apparatus and radio remote control apparatus Reception apparatus for radio-broadcasting Monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, or video recording or reproducing apparatus |
Manufacture from materials of any heading, except that of the product and heading 8529 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8535 to 8537 |
Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity: |
Manufacture from materials of any heading, except that of the product and heading 8538 or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8542 31 to 8542 39 |
Monolithic integrated circuits |
Diffusion in which integrated circuits are formed on a semi-conductor substrate by the selective introduction of an appropriate dopant assembled or not and/or tested in a non-party or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8544 to 8548 |
Insulated wire, cable (and other insulated electric conductors, optical fibre cables Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, of a kind used for electrical purposes Electrical insulators of any material Insulating fittings for electrical machines, appliances or equipment, electrical conduit tubing and joints therefor, of base metal lined with insulating material Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified or included elsewhere in this Chapter |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 86 |
Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
ex Chapter 87 |
Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof; except for: |
Manufacture in which the value of all the materials used does not exceed 45 % of the ex-works price of the product |
|
8708 |
Parts and accessories for vehicles of headings 8701 to 8705 |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
8711 |
Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 88 |
Aircraft, spacecraft, and parts thereof |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 89 |
Ships, boats and floating structures |
Manufacture from materials of any heading, except that of the product; however, hulls of heading 8906 may not be used or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product |
|
ex Chapter 90 |
Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
9001 50 |
Spectacle lenses of other materials than glass |
Manufacture from materials of any heading, except that of the product or Manufacture in which one of the following operations is made: — surfacing of the semi-finished lens into a finished ophthalmic lens with optical corrective power meant to be mounted on a pair of spectacles — coating of the lens through appropriated treatments to improve vision and ensure protection of the wearer or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 91 |
Clocks and watches and parts thereof |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product |
|
Chapter 92 |
Musical instruments; parts and accessories of such articles |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 93 |
Arms and ammunition; parts and accessories thereof |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 94 |
Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 95 |
Toys, games and sports requisites; parts and accessories thereof |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 96 |
Miscellaneous manufactured articles |
Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|
Chapter 97 |
Works of art, collectors' pieces and antiques |
Manufacture from materials of any heading, except that of the product |
|
(1)
For the special conditions relating to ‘specific process(es)’, see Introductory Notes 8.1 to 8.3.
(2)
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 6.
(3)
See Introductory Note 7.
(4)
See Introductory Note 9. |
||
ANNEX III
TEXT OF THE ORIGIN DECLARATION
The origin declaration, the text of which is given below, must be made out in accordance with the footnotes. However, the footnotes do not have to be reproduced.
Albanian version
Eksportuesi i produkteve të mbuluara nga ky dokument (autorizim doganor Nr. … ( 4 )) deklaron që përveç rasteve kur tregohet qartësisht ndryshe, këto produkte janë me origjine preferenciale … ( 5 ) n në përputhje me Rregullat kalimtare të origjinës.
Arabic version
Bosnian version
Izvoznik proizvoda obuhvaćenih ovom ispravom (carinsko ovlaštenje br. …(1)) izjavljuje da su, osim ako je to drugačije izričito navedeno, ovi proizvodi …(2) preferencijalnog porijekla u skladu sa prijelaznim pravilima porijekla.
Bulgarian version
Износителят на продуктите, обхванати от този документ (митническо разрешение №…(1)), декларира, че освен където ясно е отбелязано друго, тези продукти са с …(2) преференциален произход съгласно преходните правила за произход.
Croatian version
Izvoznik proizvoda obuhvaćenih ovom ispravom (carinsko ovlaštenje br. …(1)) izjavljuje da su, osim ako je drukčije izričito navedeno, ovi proizvodi …(2) preferencijalnog podrijetla prema prijelaznim pravilima o podrijetlu.
Czech version
Vývozce výrobků uvedených v tomto dokumentu (číslo povolení …(1)) prohlašuje, že podle přechodných pravidel původu mají tyto výrobky kromě zřetelně označených preferenční původ v … (2).
Danish version
Eksportøren af varer, der er omfattet af nærværende dokument (toldmyndighedernes tilladelse nr. …(1)) erklærer, at varerne, medmindre andet tydeligt er angivet, har præferenceoprindelse i …(2) i henhold til overgangsreglerne for oprindelse.
Dutch version
De exporteur van de goederen waarop dit document van toepassing is (douanevergunning nr. …(1)), verklaart dat, behoudens uitdrukkelijke andersluidende vermelding, deze goederen van preferentiële … (2) oorsprong zijn in overeenstemming met de overgangsregels van oorsprong.
English version
The exporter of the products covered by this document (customs authorization No…(1)) declares that, except where otherwise clearly indicated, these products are of …(2) preferential origin according to the transitional rules of origin.
Estonian version
Käesoleva dokumendiga hõlmatud toodete eksportija (tolli kinnitus nr. …(1)) deklareerib, et need tooted on päritolureeglite üleminekueeskirjade kohaselt …(2)sooduspäritoluga, välja arvatud juhul, kui on selgelt näidatud teisiti.
Faeroese version
Útflytarin av vørunum, sum hetta skjal fevnir um (tollvaldsins loyvi nr. …(1)) váttar, át um ikki nakað annað er tilskilað, eru hesar vørur upprunavørur …(2) sambært skiftisreglunum um uppruna.
Finnish version
Tässä asiakirjassa mainittujen tuotteiden viejä (tullin lupa n:o …(1)) ilmoittaa, että nämä tuotteet ovat, ellei toisin ole selvästi merkitty, etuuskohteluun oikeutettuja…(2) alkuperätuotteita siirtymäkauden alkuperäsääntöjen nojalla.
French version
L'exportateur des produits couverts par le présent document (autorisation douanière no …(1)) déclare que, sauf indication claire du contraire, ces produits ont l'origine préférentielle …(2) selon les règles d'origine transitoires.
German version
Der Ausführer (Ermächtigter Ausführer; Bewilligungs-Nr. …(1)) der Waren, auf die sich dieses Handelspapier bezieht, erklärt, dass diese Waren, soweit nicht anders angegeben, präferenzbegünstigte …(2) Ursprungswaren gemäß den Übergangsregeln für den Ursprung sind.
Georgian version
Greek version
Ο εξαγωγέας των προϊόντων που καλύπτονται από το παρόν έγγραφο (άδεια τελωνείου υπ' αριθ. …(1)) δηλώνει ότι, εκτός εάν δηλώνεται σαφώς άλλως, τα προϊόντα αυτά είναι προτιμησιακής καταγωγής …(2) σύμφωνα με τους μεταβατικούς κανόνες καταγωγής.
Hebrew version
Hungarian version
A jelen okmányban szereplő termékek exportőre (vámfelhatalmazási szám: …(1)) kijelentem, hogy eltérő egyértelmű jelzés hiányában a termékek az átmeneti származási szabályok szerint preferenciális …(2) származásúak.
Icelandic version
Útflytjandi framleiðsluvara sem skjal þetta tekur til (leyfi tollyfirvalda nr. …(1)), lýsir því yfir að vörurnar séu, ef annars er ekki greinilega getið, af … (2) uppruna samkvæmt upprunareglum á umbreytingartímabili.
Italian version
L'esportatore delle merci contemplate nel presente documento (autorizzazione doganale n. …(1)) dichiara che, salvo indicazione contraria, le merci sono di origine preferenziale …(2) conformemente alle norme di origine transitorie.
Latvian version
To produktu eksportētājs, kuri ietverti šajā dokumentā (muitas atļauja Nr. …(1)), deklarē, ka, izņemot tur, kur ir citādi skaidri noteikts, šiem produktiem ir…(2) preferenciāla izcelsme saskaņā ar pārejas noteikumiem par izcelsmi.
Lithuanian version
Šiame dokumente nurodytų produktų eksportuotojas (muitinės leidimo Nr. .…(1)) deklaruoja, kad, jeigu aiškiai nenurodyta kitaip, šie produktai turi …(2) lengvatinės kilmės statusą pagal pereinamojo laikotarpio kilmės taisykles.
Macedonian version
Извозникот на производите што ги покрива овоj документ (царинскo одобрение бр. … (1)) изjавува дека, освен ако тоа не е jасно поинаку назначено, овие производи се со … (2) преференциjaлно потекло, во согласност со преодните правила за потекло.
Maltese version
L-esportatur tal-prodotti koperti minn dan id-dokument (awtorizzazzjoni tad-dwana nru…(1)) jiddikjara li, ħlief fejn indikat mod ieħor b'mod ċar, dawn il-prodotti huma ta' oriġini preferenzjali … (2) skont ir-regoli ta' oriġini tranżitorji.
Montenegrin version
Извозник производа обухваћених овом исправом (царинско овлашћење бр. …(1)) изјављује да су, осим ако је другачије изричито наведено, ови производи …(2) преференцијалног пориjекла, у складу са транзиционим правилима поријекла.
Izvoznik proizvoda obuhvaćenih ovom ispravom (carinsko ovlašćenje br. …(1)) izjavljuje da su, osim ako je drugačije izričito navedeno, ovi proizvodi …(2) preferencijalnog porijekla u skladu sa tranzicionim pravilima porijekla.
Norwegian version
Eksportøren av produktene omfattet av dette dokument (tollmyndighetenes autorisasjonsnr…(1)) erklærer at disse produktene, unntatt hvor annet er tydelig angitt, har … preferanseopprinnelse i henhold til overgangsreglene for opprinnelse(2).
Polish version
Eksporter produktów objętych tym dokumentem (upoważnienie władz celnych nr…(1)) deklaruje, że z wyjątkiem gdzie jest to wyraźnie określone, produkty te mają …(2) preferencyjne pochodzenie zgodnie z przejściowymi regułami pochodzenia.
Portuguese version
O exportador dos produtos cobertos pelo presente documento (autorização aduaneira n.o…(1)) declara que, salvo expressamente indicado em contrário, estes produtos são de origem preferencial …(2) de acordo com as regras de origem transitórias.
Romanian version
Exportatorul produselor care fac obiectul prezentului document (autorizația vamală nr. …(1)) declară că, exceptând cazul în care se indică altfel în mod clar, aceste produse sunt de origine preferențială ….(2) în conformitate cu regulile de origine tranzitorii.
Serbian version
Извозник производа обухваћених овом исправом (царинско овлашћење бр. …(1)) изјављује да су, осим ако је другачије изричито наведено, ови производи …(2) преференцијалног порекла, у складу са прелазним правилима о пореклу.
Izvoznik proizvoda obuhvaćenih ovom ispravom (carinsko ovlašćenje br…(1)) izjavljuje da su, osim ako je drugačije izričito nаvedeno, ovi proizvodi … (2) preferencijalnog porekla, u skladu sa prelaznim pravilima o poreklu.
Slovak version
Vývozca výrobkov uvedených v tomto dokumente (číslo povolenia …(1)) vyhlasuje, že pokiaľ nie je zreteľne uvedené inak, tieto výrobky majú v súlade s prechodnými pravidlami pôvodu preferenčný pôvod v …(2).
Slovenian version
Izvoznik blaga, zajetega s tem dokumentom (pooblastilo carinskih organov št …(1)), izjavlja, da, razen če ni drugače jasno navedeno, ima to blago preferencialno …(2) poreklo v skladu s prehodnimi pravili o poreklu.
Spanish version
El exportador de los productos incluidos en el presente documento (autorización aduanera n.o…(1)) declara que, excepto donde se indique claramente lo contrario, estos productos son de origen preferencial…(2) con arreglo a las normas de origen transitorias.
Swedish version
Exportören av de varor som omfattas av detta dokument (tullmyndighetens tillstånd nr. …(1)) försäkrar att dessa varor, om inte annat tydligt markerats, har förmånsberättigande …(2) ursprung i enlighet med övergångsreglerna om ursprung.
Turkish version
Bu belge kapsamındaki ürünlerin ihracatçısı (gümrük yetki No: …(1)), aksi açıkça belirtilmedikçe, bu ürünlerin geçiș menșe kurallarına göre ….(2) tercihli menșeli olduğunu beyan eder.
Ukrainian version
Експортер продукцiї, на яку поширюється цей документ (митний дозвiл № ….(1)) заявляє, що, за винятком випадкiв, де це явно зазначено, ця продукцiя має … (2) преференцiйне походження згiдно з перехiдними правилами походження.
…
(Place and date) ( 6 )
…
(Signature of the exporter, in addition the name of the person signing the declaration has to be indicated in clear script) ( 7 )
ANNEX IV
SPECIMENS OF MOVEMENT CERTIFICATE EUR.1 AND APPLICATION FOR A MOVEMENT CERTIFICATE EUR.1
PRINTING INSTRUCTIONS
1. Each form shall measure 210 x 297 mm; a tolerance of up to minus 5 mm or plus 8 mm in the length may be allowed. The paper used must be white, sized for writing, not containing mechanical pulp and weighing not less than 25 g/m2. It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye.
2. The competent authorities of the Parties may reserve the right to print the forms themselves or may have them printed by approved printers. In the latter case, each form must include a reference to such approval. Each form must bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number, either printed or not, by which it can be identified.
MOVEMENT CERTIFICATE
|
1. Exporter (Name, full add ress, country) |
EUR.1 |
No A |
000.000 |
|
|
|
See notes overleaf before completing this form. |
|||
|
|
2. Certificate used in preferential trade between |
|||
|
3. Consignee (Name, full address, country) (Optional) |
… and … (Insert appropriate countries, groups of countries or territories) |
|||
|
4. Country, group of countries or territory in which the products are considered as originating |
5. Country, group of countries or territory of destination |
|||
|
6. Transport details (Optional) |
7. Remarks |
|||
|
8. Item number; Marks and numbers; Number and kind of packages(1); Description of goods |
9. Gross mass (kg) or other measure (litres, m3, etc.) |
10. Invoices (Optional) |
||
|
11. CUSTOMS ENDORSEMENT Declaration certified Export document (2) Form … No … Of … Customs office … Issuing country or territory … … … Place and date … … … (Signature) |
Stamp |
12. DECLARATION BY THE EXPORTER I, the undersigned, declare that the goods described above meet the conditions required for the issue of this certificate. Place and date … … (Signature) |
||
|
(1) If goods are not packed, indicate number of articles or state ‘in bulk’, as appropriate. (2) Complete only where the regulations of the exporting country or territory require. |
||||
|
13. REQUEST FOR VERIFICATION, to |
14. RESULT OF VERIFICATION |
|||
|
|
Verification carried out shows that this certificate (1) □ was issued by the customs office indicated and that the information contained therein is accurate. □ does not meet the requirements as to authenticity and accuracy (see remarks appended). |
|||
|
Verification of the authenticity and accuracy of this certificate is requested. |
|
|||
|
… (Place and date) Stamp … (Signature) |
… (Place and date) Stamp … (Signature) (1) Insert X in the appropriate box. |
|||
|
NOTES (1) Certificate must not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections. Any such alteration must be initialled by the person who completed the certificate and endorsed by the Customs authorities of the issuing country or territory. (2) No spaces must be left between the items entered on the certificate and each item must be preceded by an item number. A horizontal line must be drawn immediately below the last item. Any unused space must be struck through in such a manner as to make any later additions impossible. (3) Goods must be described in accordance with commercial practice and with sufficient detail to enable them to be identified. |
||||
APPLICATION FOR A MOVEMENT CERTIFICATE
|
1. Exporter (Name, full address, country) |
EUR.1 |
No A |
000.000 |
|
|
|
See notes overleaf before completing this form. |
|||
|
|
2. Application for a certificate to be used in preferential trade between … and … (Insert appropriate countries or groups of countries or territories) |
|||
|
3. Consignee (Name, full address, country) (Optional) |
||||
|
|
4. Country, group of countries or territory in which the products are considered as originating |
5. Country, group of countries or territory of destination |
||
|
6. Transport details (Optional) |
7. Remarks |
|||
|
8. Item number; Marks and numbers; Number and kind of packages (1) ; Description of goods |
9. Gross mass (kg) or other measure (litres, m3, etc.) |
10. Invoices (Optional) |
||
|
(1)
If goods are not packed, indicate number of articles or state ‘in bulk’, as appropriate. |
||||
DECLARATION BY THE EXPORTER
I, the undersigned, exporter of the goods described overleaf,
DECLARE that the goods meet the conditions required for the issue of the attached certificate;
SPECIFY as follows the circumstances which have enable these goods to meet the above conditions:
…
…
…
…
SUBMIT the following supporting documents ( 8 ):
…
…
…
…
UNDERTAKE to submit, at the request of the appropriate authorities, any supporting evidence which those authorities may require for the purpose of issuing the attached certificate, and undertake, if required, to agree to any inspection of my accounts and to any check on the processes of manufacture of the above goods, carried out by the said authorities;
REQUEST the issue of the attached certificate for those goods.
…
(Place and date)
…
(Signature)
ANNEX V
SPECIAL CONDITIONS CONCERNING PRODUCTS ORIGINATING IN CEUTA AND MELILLA
Sole Article
Providing they comply with the non-alteration rule of Article 14 of this Appendix, the following shall be considered as:
products originating in Ceuta and Melilla:
products wholly obtained in Ceuta and Melilla;
products obtained in Ceuta and Melilla in the manufacture of which products other than products wholly obtained in Ceuta and Melilla are used, provided that:
the said products have undergone sufficient working or processing within the meaning of Article 4 of this Appendix; or
those products originate in Norway or in the European Union, provided that they have been submitted to working or processing which goes beyond the operations referred to in Article 6 of this Appendix;
products originating in Norway:
products wholly obtained in Norway;
products obtained in Norway, in the manufacture of which products other than products wholly obtained in Norway are used, provided that:
those products have undergone sufficient working or processing within the meaning of Article 4 of this Appendix; or
those products originate in Ceuta and Melilla or in the European Union, and they have been submitted to working or processing which goes beyond the operations referred to in Article 6 of this Appendix.
ANNEX VI
SUPPLIER'S DECLARATION
The supplier's declaration, the text of which is provided below, must be made out in accordance with the footnotes. However, the footnotes do not have to be reproduced.
SUPPLIERS DECLARATION
for goods which have undergone working or processing in applying Contracting Parties without having obtained preferential origin status
I, the undersigned, supplier of the goods covered by the annexed document, declare that:
The following materials which do not originate in [indicate the name of the relevant applying Contracting Party(ies)] have been used in [indicate the name of the relevant applying Contracting Party(ies)] to produce these goods:
|
Description of the goods supplied (1) |
Description of non-originating materials used |
Heading of non-originating materials used (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total value |
|
||
|
(1)
When the invoice, delivery note or other commercial document to which the declaration is annexed relates to different kinds of goods, or to goods which do not incorporate non-originating materials to the same extent, the supplier must clearly differentiate them. Example: The document relates to different models of electric motor of heading 8501 to be used in the manufacture of washing machines of heading 8450 . The nature and value of the non-originating materials used in the manufacture of those motors differ from one model to another. The models must therefore be differentiated in the first column and the indications in the other columns must be provided separately for each of the models to make it possible for the manufacturer of washing machines to make a correct assessment of the originating status of his products depending on which model of electrical motor he uses.
(2)
The indications requested in those columns should only be given if they are necessary. Examples: The rule for garments of ex Chapter 62 says Weaving combined with making-up including cutting of fabric may be used. If a manufacturer of such garments in an applying Contracting Party uses fabric imported from the European Union which has been obtained there by weaving non-originating yarn, it is sufficient for the European Union supplier to describe in his declaration the non-originating material used as yarn, without it being necessary to indicate the heading and value of such yarn. A producer of iron of heading 7217 who has produced it from non-originating iron bars should indicate in the second column ‘bars of iron’. Where this wire is to be used in the production of a machine, for which the rule contains a limitation for all non-originating materials used to a certain percentage value, it is necessary to indicate in the third column the value of non-originating bars.
(3)
‘Value of materials’ means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in [indicate the name of the relevant applying Contracting Party(ies)]. The exact value for each non-originating material used must be given per unit of the goods specified in the first column. |
|||
All the other materials used in [indicate the name of the relevant applying Contracting Party(ies)] to produce those goods originate in [indicate the name of the relevant applying Contracting Party(ies)];
The following goods have undergone working or processing outside [indicate the name of the relevant applying Contracting Party(ies)] in accordance with Article 13 of this Appendix and have acquired the following total added value there:
|
Description of the goods supplied |
Total added value acquired outside [indicate the name of the relevant applying Contracting Party(ies)] (1) |
|
|
|
|
|
|
|
|
|
|
|
(Place and date) |
|
|
|
|
|
|
|
|
|
|
|
(Address and signature of the supplier; in addition the name of the person signing the declaration has to be indicated in clear script) |
|
|
|
|
(1)
‘Total added value’ shall mean all costs accumulated outside [indicate the name of the relevant applying Contracting Party(ies)], including the value of all materials added there. The exact total added value acquired outside [indicate the name of the relevant applying Contracting Party(ies)] must be given per unit of the goods specified in the first column. |
|
ANNEX VII
LONG-TERM SUPPLIER'S DECLARATION
The long-term supplier's declaration, the text of which is given below, must be made out in accordance with the footnotes. However, the footnotes do not have to be reproduced.
LONG-TERM SUPPLIER'S DECLARATION
for goods which have undergone working or processing in an applying Contracting Party without having obtained preferential origin status
I, the undersigned, supplier of the goods covered by the annexed document, which are regularly supplied to ( 9 ) …, declare that:
The following materials which do not originate in [indicate the name of the relevant applying Contracting Party(ies)] have been used in [indicate the name of the relevant applying Contracting Party(ies)] to produce these goods:
|
Description of the goods supplied (1) |
Description of non-originating materials used |
Heading of non-originating materials used (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total value |
|
||
|
(1)
When the invoice, delivery note or other commercial document to which the declaration is annexed relates to different kinds of goods, or to goods which do not incorporate non-originating materials to the same extent, the supplier must clearly differentiate them. Example: The document relates to different models of electric motor of heading 8501 to be used in the manufacture of washing machines of heading 8450 . The nature and value of the non-originating materials used in the manufacture of those motors differ from one model to another. The models must therefore be differentiated in the first column and the indications in the other columns must be provided separately for each of the models to make it possible for the manufacturer of washing machines to make a correct assessment of the originating status of his products depending on which model of electrical motor he uses.
(2)
The indications requested in these columns should only be given if they are necessary. Examples: The rule for garments of ex Chapter 62 says Weaving combined with making-up including cutting of fabric may be used. If a manufacturer of such garments in an applying Contracting Party uses fabric imported from the European Union which has been obtained there by weaving non-originating yarn, it is sufficient for the European Union supplier to describe in his declaration the non-originating material used as yarn, without it being necessary to indicate the heading and value of such yarn. A producer of iron of heading 7217 who has produced it from non-originating iron bars should indicate in the second column ‘bars of iron’. Where this wire is to be used in the production of a machine, for which the rule contains a limitation for all non-originating materials used to a certain percentage value, it is necessary to indicate in the third column the value of non-originating bars.
(3)
‘Value of materials’ means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in [indicate the name of the relevant applying Contracting Party(ies)]. The exact value for each non-originating material used must be given per unit of the goods specified in the first column. |
|||
All the other materials used in [indicate the name of the relevant applying Contracting Party(ies)] to produce those goods originate in [indicate the name of the relevant applying Contracting Party(ies)];
The following goods have undergone working or processing outside [indicate the name of the relevant applying Contracting Party(ies)] in accordance with Article 13 of this Appendix and have acquired the following total added value there:
|
Description of the goods supplied |
Total added value acquired outside [indicate the name of the relevant applying Contracting Party(ies)] (1) |
|
|
|
|
|
|
|
|
|
|
(1)
‘Total added value’ shall mean all costs accumulated outside [indicate the name of the relevant applying Contracting Party(ies)], including the value of all materials added there. The exact total added value acquired outside [indicate the name of the relevant applying Contracting Party(ies)] must be given per unit of the goods specified in the first column. |
|
This declaration is valid for all subsequent consignments of those goods dispatched from…
to… ( 10 )
I undertake to inform … (9) immediately if this declaration is no longer valid.
|
|
|
(Place and date) |
|
|
|
|
|
|
|
(Address and signature of the supplier; in addition the name of the person signing the declaration has to be indicated in clear script) |
PROTOCOL No 4
concerning certain provisions relating to Ireland
Notwithstanding Article 13 of the Agreement, the measures provided for in paragraphs 1 and 2 of Protocol No 6 and in Article 1 of Protocol No 7 of the ‘Act concerning the Conditions of Accession and the Adjustments to the Treaties’ on certain quantitative restrictions relating to Ireland and on imports of motor vehicles and the motor vehicle assembly industry in Ireland shall apply to Norway.
PROTOCOL No 5
concerning the elimination of certain quantitative restrictions on exports
Article 1
Quantitative restrictions applied by the Community on exports to Norway of the products listed below shall be eliminated at the latest on the dates indicated.
|
Harmonized system Heading No |
Product description |
Date of elimination |
|
74.04 |
Copper waste and scrap |
1.1.1992 |
|
ex 44.01 |
Fuel wood, of coniferous wood and pine and fir shavings |
1.1.1993 |
|
ex 44.03 |
Wood in the rough, whether or not stripped of its bark or merely roughed down |
|
|
— Other, not including poplar |
1.1.1993 |
|
|
Wood, roughly squared or half squared but not further manufactured |
|
|
|
— Other, not including poplar |
1.1.1993 |
|
|
ex 44.07 |
Wood sawn lengthwise, sliced or peeled but not further prepared, of a thickness exceeding 6 mm |
|
|
— Of coniferous wood not including small boards for the manufacture of boxes, sieves or riddles and the like |
1.1.1993 |
|
|
ex 41.01 |
Raw hides and skins of bovine animals weighing less than 6 kg per skin |
1.1.1992 |
|
ex 41.02 |
Raw skins of sheep and lambs |
1.1.1992 |
|
ex 41.03 |
Raw hides and skins of goats and kids |
1.1.1992 |
|
ex 43.01 |
Raw furskins of rabbits |
1.1.1992 |
Article 2
Quantitative restrictions applied by Norway on exports to the Community of the products listed below shall be eliminated at the latest on the dates indicated.
|
Harmonized system Heading No |
Product description |
Date of elimination |
|
74.04 |
Copper waste and scrap |
1.1.1992 |
FINAL ACT
The representatives
OF THE EUROPEAN ECONOMIC COMMUNITY
and
OF THE KINGDOM OF NORWAY,
assembled at Brussels on this fourteenth day of May in the year one thousand nine hundred and seventy-three,
for the signature of the Agreement between the European Economic Community and the Kingdom of Norway,
at the time of signature of this Agreement,
have taken note of the declarations listed below and annexed to this Act:
Declaration by the European Economic Community concerning Article 23 (1) of the Agreement,
Declaration by the European Economic Community concerning the regional application of certain provisions of the Agreement.
Udfærdiget i Bruxelles, den fjortende maj nitten hundrede og treoghalvfjerds.
Geschehen zu Brüssel am vierzehnten Mai neunzehnhundertdreiundsiebzig.
Done at Brussels on this fourteenth day of May in the year one thousand nine hundred and seventy-three.
Fait à Bruxelles, le quatorze mai mil neuf cent soixante-treize.
Fatto a Bruxelles, addì quattordici maggio millenovecentosettantatré.
Gedaan te Brussel, de veertiende mei negentienhonderddrieënzeventig.
Utferdiget i Brussel, fjortende mai nitten hundre og syttitre.
På Rådet for De europæiske Fællesskabers vegne
Im Namen des Rates der Europäischen Gemeinschaften
In the name of the Council of the European Communities
Au nom du Conseil des Communautés européennes
A nome del Consiglio delle Comunità europee
Namens de Raad van de Europese Gemeenschappen
For Kongeriket Norge
DECLARATIONS
Declaration by the European Economic Community concerning Article 23 (1) of the Agreement
The European Economic Community declares that in the context of the autonomous implementation of Article 23 (1) of the Agreement which is incumbent on the Contracting Parties, it will assess any practices contrary to that Article on the basis of criteria arising from the application of the rules of Articles 85, 86, 90 and 92 of the Treaty establishing the European Economic Community.
Declaration by the European Economic Community concerning the regional application of certain provisions of the Agreement
The European Economic Community declares that the application of any measures it may take under Articles 23, 24, 25 or 26 of the Agreement, in accordance with the procedure and under the arrangements set out in Article 27, or under Article 28 may be limited to one of its regions by virtue of Community rules.
( *1 ) Translation.
( 1 ) OJ L 54, 26.2.2013, p. 4.
( 2 ) The parties agree to waive the obligation to include in the proof of origin the statement referred to in Article 8(3).
( 3 ) OJ L 302, 15.11.1985, p. 23.
( 4 ) When the origin declaration is made out by an approved exporter, the authorisation number of the approved exporter must be entered in this space. When the origin declaration is not made out by an approved exporter, the words in brackets shall be omitted or the space left blank.
( 5 ) Origin of products to be indicated. When the origin declaration relates in whole or in part, to products originating in Ceuta and Melilla, the exporter must clearly indicate them in the document on which the declaration is made out, by means of the symbol ‘CM’.
( 6 ) These indications may be omitted if the information is contained on the document itself.
( 7 ) In cases where the exporter is not required to sign, the exemption of signature also implies the exemption of the name of the signatory.
( 8 ) For example: import documents, movement certificates, invoices, manufacturer's declarations, etc., referring to the products used in manufacture or to the goods re-exported in the same state.
( 9 ) Name and address of the customer.
( 10 ) Insert dates. The period of validity of the long-term supplier's declaration should not normally exceed 24 months, subject to the conditions laid down by the customs authorities of the applying Contracting Party where the long-term supplier's declaration is made out.