ISSN 1977-091X
Official Journal
of the European Union
C 49
English edition
Information and Notices
Volume 61
9 February 2018
|
ISSN 1977-091X |
||
|
Official Journal of the European Union |
C 49 |
|
|
|
||
|
English edition |
Information and Notices |
Volume 61 |
|
|
|
|
|
(1) Text with EEA relevance. |
|
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
9.2.2018 |
EN |
Official Journal of the European Union |
C 49/1 |
Commission communication in the framework of the implementation of Directive 2014/68/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2018/C 049/01)
The following list contains references to harmonised standards for pressure equipment and harmonised supporting standards for materials used in manufacturing pressure equipment. In the case of a harmonised supporting standard for materials, presumption of conformity to the essential safety requirements is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently the technical data stated in the material standard shall be assessed against the design requirements of this specific item of equipment to verify that the essential safety requirements of the Pressure Equipment Directive are satisfied.
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 3-8:2006 Portable fire extinguishers — Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
12.8.2016 |
|
|
|
|
EN 3-8:2006/AC:2007 |
12.8.2016 |
|
|
|
CEN |
EN 19:2016 Industrial valves — Marking of metallic valves |
12.8.2016 |
|
|
|
CEN |
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels |
12.8.2016 |
|
|
|
CEN |
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar |
12.8.2016 |
|
|
|
CEN |
EN 378-2:2016 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation |
17.11.2017 |
EN 378-2:2008+A2:2012 Note 2.1 |
The date of this publication |
|
CEN |
EN 593:2009+A1:2011 Industrial valves — Metallic butterfly valves |
12.8.2016 |
|
|
|
CEN |
EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels |
12.8.2016 |
|
|
|
|
EN 676:2003+A2:2008/AC:2008 |
12.8.2016 |
|
|
|
CEN |
EN 764-4:2014 Pressure equipment — Part 4: Establishment of technical delivery conditions for metallic materials |
12.8.2016 |
|
|
|
CEN |
EN 764-5:2014 Pressure equipment — Part 5: Inspection documentation of metallic materials and compliance with the material specification |
12.8.2016 |
|
|
|
CEN |
EN 764-7:2002 Pressure equipment — Part 7: Safety systems for unfired pressure equipment |
12.8.2016 |
|
|
|
|
EN 764-7:2002/AC:2006 |
12.8.2016 |
|
|
|
CEN |
EN 1057:2006+A1:2010 Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heating applications |
12.8.2016 |
|
|
|
CEN |
EN 1092-1:2007+A1:2013 Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN designated — Part 1: Steel flanges |
12.8.2016 |
|
|
|
CEN |
EN 1092-3:2003 Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN designated — Part 3: Copper alloy flanges |
12.8.2016 |
|
|
|
|
EN 1092-3:2003/AC:2007 |
12.8.2016 |
|
|
|
CEN |
EN 1092-4:2002 Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN designated — Part 4: Aluminium alloy flanges |
12.8.2016 |
|
|
|
CEN |
EN 1171:2015 Industrial valves — Cast iron gate valves |
12.8.2016 |
|
|
|
CEN |
EN 1252-2:2001 Cryogenic vessels — Materials — Part 2: Toughness requirements for temperatures between - 80 oC and - 20 oC |
12.8.2016 |
|
|
|
CEN |
EN 1349:2009 Industrial process control valves |
12.8.2016 |
|
|
|
CEN |
EN 1515-4:2009 Flanges and their joints — Bolting — Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
12.8.2016 |
|
|
|
CEN |
EN 1562:2012 Founding — Malleable cast irons |
12.8.2016 |
|
|
|
CEN |
EN 1563:2011 Founding — Spheroidal graphite cast irons |
12.8.2016 |
|
|
|
CEN |
EN 1564:2011 Founding — Ausferritic spheroidal graphite cast irons |
12.8.2016 |
|
|
|
CEN |
EN 1591-1:2013 Flanges and their joints — Design rules for gasketed circular flange connections — Part 1: Calculation |
12.8.2016 |
|
|
|
CEN |
EN 1626:2008 Cryogenic vessels — Valves for cryogenic service |
12.8.2016 |
|
|
|
CEN |
EN 1653:1997 Copper and copper alloys — Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
12.8.2016 |
|
|
|
|
EN 1653:1997/A1:2000 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 1759-3:2003 Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, Class designated — Part 3: Copper alloy flanges |
12.8.2016 |
|
|
|
|
EN 1759-3:2003/AC:2004 |
12.8.2016 |
|
|
|
CEN |
EN 1759-4:2003 Flanges and their joint — Circular flanges for pipes, valves, fittings and accessories, class designated — Part 4: Aluminium alloy flanges |
12.8.2016 |
|
|
|
CEN |
EN 1797:2001 Cryogenic vessels — Gas/material compatibility |
12.8.2016 |
|
|
|
CEN |
EN 1866-2:2014 Mobile fire extinguishers — Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 |
12.8.2016 |
|
|
|
CEN |
EN 1866-3:2013 Mobile fire extinguishers — Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1 |
12.8.2016 |
|
|
|
CEN |
EN 1983:2013 Industrial valves — Steel ball valves |
12.8.2016 |
|
|
|
CEN |
EN 1984:2010 Industrial valves — Steel gate valves |
12.8.2016 |
|
|
|
CEN |
EN ISO 4126-1:2013 Safety devices for protection against excessive pressure — Part 1: Safety valves (ISO 4126-1:2013) |
12.8.2016 |
|
|
|
CEN |
EN ISO 4126-3:2006 Safety devices for protection against excessive pressure — Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) |
12.8.2016 |
|
|
|
CEN |
EN ISO 4126-4:2013 Safety devices for protection against excessive pressure — Part 4: Pilot-operated safety valves (ISO 4126-4:2013) |
12.8.2016 |
|
|
|
CEN |
EN ISO 4126-5:2013 Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013) |
12.8.2016 |
|
|
|
CEN |
EN ISO 4126-7:2013 Safety devices for protection against excessive pressure — Part 7: Common data (ISO 4126-7:2013) |
12.8.2016 |
|
|
|
CEN |
EN ISO 9606-1:2017 Qualification testing of welders — Fusion welding — Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
This is the first publication |
EN ISO 9606-1:2013 Note 2.1 |
28.2.2018 |
|
CEN |
EN ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
12.8.2016 |
|
|
|
CEN |
EN ISO 9606-3:1999 Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys (ISO 9606-3:1999) |
12.8.2016 |
|
|
|
CEN |
EN ISO 9606-4:1999 Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
12.8.2016 |
|
|
|
CEN |
EN ISO 9606-5:2000 Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
12.8.2016 |
|
|
|
CEN |
EN ISO 9712:2012 Non-destructive testing — Qualification and certification of NDT personnel (ISO 9712:2012) |
12.8.2016 |
|
|
|
CEN |
EN 10028-1:2017 Flat products made of steels for pressure purposes — Part 1: General requirements |
This is the first publication |
EN 10028-1:2007+A1:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 10028-2:2017 Flat products made of steels for pressure purposes — Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
This is the first publication |
EN 10028-2:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 10028-3:2017 Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized |
This is the first publication |
EN 10028-3:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 10028-4:2017 Flat products made of steels for pressure purposes — Part 4: Nickel alloy steels with specified low temperature properties |
This is the first publication |
EN 10028-4:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 10028-5:2017 Flat products made of steels for pressure purposes — Part 5: Weldable fine grain steels, thermomechanically rolled |
This is the first publication |
EN 10028-5:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 10028-6:2017 Flat products made of steels for pressure purposes — Part 6: Weldable fine grain steels, quenched and tempered |
This is the first publication |
EN 10028-6:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 10028-7:2016 Flat products made of steels for pressure purposes — Part 7: Stainless steels |
17.11.2017 |
EN 10028-7:2007 Note 2.1 |
The date of this publication |
|
CEN |
EN 10204:2004 Metallic products — Types of inspection documents |
12.8.2016 |
|
|
|
CEN |
EN 10213:2007+A1:2016 Steel castings for pressure purposes |
12.8.2016 |
|
|
|
CEN |
EN 10216-1:2013 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties |
12.8.2016 |
|
|
|
CEN |
EN 10216-2:2013 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
12.8.2016 |
|
|
|
CEN |
EN 10216-3:2013 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy fine grain steel tubes |
12.8.2016 |
|
|
|
CEN |
EN 10216-4:2013 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
12.8.2016 |
|
|
|
CEN |
EN 10216-5:2013 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 5: Stainless steel tubes |
12.8.2016 |
|
|
|
CEN |
EN 10217-1:2002 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties |
12.8.2016 |
|
|
|
|
EN 10217-1:2002/A1:2005 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 10217-2:2002 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
12.8.2016 |
|
|
|
|
EN 10217-2:2002/A1:2005 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 10217-3:2002 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy fine grain steel tubes |
12.8.2016 |
|
|
|
|
EN 10217-3:2002/A1:2005 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 10217-4:2002 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
12.8.2016 |
|
|
|
|
EN 10217-4:2002/A1:2005 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 10217-5:2002 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
12.8.2016 |
|
|
|
|
EN 10217-5:2002/A1:2005 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 10217-6:2002 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
12.8.2016 |
|
|
|
|
EN 10217-6:2002/A1:2005 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 10217-7:2014 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 7: Stainless steel tubes |
12.8.2016 |
|
|
|
CEN |
EN 10222-1:2017 Steel forgings for pressure purposes — Part 1: General requirements for open die forgings |
17.11.2017 |
EN 10222-1:1998 Note 2.1 |
31.10.2017 |
|
CEN |
EN 10222-2:2017 Steel forgings for pressure purposes — Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
17.11.2017 |
EN 10222-2:1999 Note 2.1 |
31.10.2017 |
|
CEN |
EN 10222-3:2017 Steel forgings for pressure purposes — Part 3: Nickel steels with specified low temperature properties |
17.11.2017 |
EN 10222-3:1998 Note 2.1 |
31.10.2017 |
|
CEN |
EN 10222-4:2017 Steel forgings for pressure purposes — Part 4: Weldable fine grain steels with high proof strength |
17.11.2017 |
EN 10222-4:1998 Note 2.1 |
31.10.2017 |
|
CEN |
EN 10222-5:2017 Steel forgings for pressure purposes — Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
17.11.2017 |
EN 10222-5:1999 Note 2.1 |
31.10.2017 |
|
CEN |
EN 10253-2:2007 Butt-welding pipe fittings — Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
12.8.2016 |
|
|
|
CEN |
EN 10253-4:2008 Butt-welding pipe fittings — Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
12.8.2016 |
|
|
|
|
EN 10253-4:2008/AC:2009 |
12.8.2016 |
|
|
|
CEN |
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
12.8.2016 |
|
|
|
CEN |
EN 10272:2016 Stainless steel bars for pressure purposes |
17.11.2017 |
EN 10272:2007 Note 2.1 |
The date of this publication |
|
CEN |
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
17.11.2017 |
EN 10273:2007 Note 2.1 |
The date of this publication |
|
CEN |
EN 10305-4:2016 Steel tubes for precision applications — Technical delivery conditions — Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
12.8.2016 |
|
|
|
CEN |
EN 10305-6:2016 Steel tubes for precision applications — Technical delivery conditions — Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
12.8.2016 |
|
|
|
CEN |
EN ISO 10931:2005 Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Specifications for components and the system (ISO 10931:2005) |
12.8.2016 |
|
|
|
|
EN ISO 10931:2005/A1:2015 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 12178:2016 Refrigerating systems and heat pumps — Liquid level indicating devices — Requirements, testing and marking |
17.11.2017 |
EN 12178:2003 Note 2.1 |
The date of this publication |
|
CEN |
EN 12263:1998 Refrigerating systems and heat pumps — Safety switching devices for limiting the pressure — Requirements and tests |
12.8.2016 |
|
|
|
CEN |
EN 12266-1:2012 Industrial valves — Testing of metallic valves — Part 1: Pressure tests, test procedures and acceptance criteria — Mandatory requirements |
12.8.2016 |
|
|
|
CEN |
EN 12284:2003 Refrigerating systems and heat pumps — Valves — Requirements, testing and marking |
12.8.2016 |
|
|
|
CEN |
EN 12288:2010 Industrial valves — Copper alloy gate valves |
12.8.2016 |
|
|
|
CEN |
EN 12392:2016 Aluminium and aluminium alloys — Wrought products and cast products — Special requirements for products intended for the production of pressure equipment |
12.8.2016 |
|
|
|
CEN |
EN 12420:2014 Copper and copper alloys — Forgings |
12.8.2016 |
|
|
|
CEN |
EN 12434:2000 Cryogenic vessels — Cryogenic flexible hoses |
12.8.2016 |
|
|
|
|
EN 12434:2000/AC:2001 |
12.8.2016 |
|
|
|
CEN |
EN 12451:2012 Copper and copper alloys — Seamless, round tubes for heat exchangers |
12.8.2016 |
|
|
|
CEN |
EN 12452:2012 Copper and copper alloys — Rolled, finned, seamless tubes for heat exchangers |
12.8.2016 |
|
|
|
CEN |
EN 12516-1:2014 Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells |
12.8.2016 |
|
|
|
CEN |
EN 12516-2:2014 Industrial valves — Shell design strength — Part 2: Calculation method for steel valve shells |
12.8.2016 |
|
|
|
CEN |
EN 12516-3:2002 Valves — Shell design strength — Part 3: Experimental method |
12.8.2016 |
|
|
|
|
EN 12516-3:2002/AC:2003 |
12.8.2016 |
|
|
|
CEN |
EN 12516-4:2014 Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
12.8.2016 |
|
|
|
CEN |
EN 12542:2010 LPG equipment and accessories — Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 — Design and manufacture |
12.8.2016 |
|
|
|
CEN |
EN 12735-1:2016 Copper and copper alloys — Seamless, round tubes for air conditioning and refrigeration — Part 1: Tubes for piping systems |
12.8.2016 |
|
|
|
CEN |
EN 12735-2:2016 Copper and copper alloys — Seamless, round tubes for air conditioning and refrigeration — Part 2: Tubes for equipment |
12.8.2016 |
|
|
|
CEN |
EN 12778:2002 Cookware — Pressure cookers for domestic use |
12.8.2016 |
|
|
|
|
EN 12778:2002/AC:2003 |
12.8.2016 |
|
|
|
|
EN 12778:2002/A1:2005 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 12952-1:2015 Water-tube boilers and auxiliary installations — Part 1: General |
12.8.2016 |
|
|
|
CEN |
EN 12952-2:2011 Water-tube boilers and auxiliary installations — Part 2: Materials for pressure parts of boilers and accessories |
12.8.2016 |
|
|
|
CEN |
EN 12952-3:2011 Water-tube boilers and auxiliary installations — Part 3: Design and calculation for pressure parts of the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12952-5:2011 Water-tube boilers and auxiliary installations — Part 5: Workmanship and construction of pressure parts of the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12952-6:2011 Water-tube boilers and auxiliary installations — Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12952-7:2012 Water-tube boilers and auxiliary installations — Part 7: Requirements for equipment for the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12952-8:2002 Water-tube boilers and auxiliary installations — Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12952-9:2002 Water-tube boilers and auxiliary installations — Part 9: Requirements for firing systems for pulverized solid fuels for the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12952-10:2002 Water-tube boilers and auxiliary installations — Part 10: Requirements for safeguards against excessive pressure |
12.8.2016 |
|
|
|
CEN |
EN 12952-11:2007 Water-tube boilers and auxiliary installations — Part 11: Requirements for limiting devices of the boiler and accessories |
12.8.2016 |
|
|
|
CEN |
EN 12952-14:2004 Water-tube boilers and auxiliary installations — Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution |
12.8.2016 |
|
|
|
CEN |
EN 12952-16:2002 Water-tube boilers and auxiliary installations — Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12952-18:2012 Water-tube boilers and auxiliary installations — Part 18: Operating instructions |
12.8.2016 |
|
|
|
CEN |
EN 12953-1:2012 Shell boilers — Part 1: General |
12.8.2016 |
|
|
|
CEN |
EN 12953-2:2012 Shell boilers — Part 2: Materials for pressure parts of boilers and accessories |
12.8.2016 |
|
|
|
CEN |
EN 12953-3:2016 Shell boilers — Part 3: Design and calculation for pressure parts |
12.8.2016 |
|
|
|
CEN |
EN 12953-4:2002 Shell boilers — Part 4: Workmanship and construction of pressure parts of the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12953-5:2002 Shell boilers — Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12953-6:2011 Shell Boilers — Part 6: Requirements for equipment for the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12953-7:2002 Shell boilers — Part 7: Requirements for firing systems for liquid and gaseous fuels for the boilers |
12.8.2016 |
|
|
|
CEN |
EN 12953-8:2001 Shell boilers — Part 8: Requirements for safeguards against excessive pressure |
12.8.2016 |
|
|
|
|
EN 12953-8:2001/AC:2002 |
12.8.2016 |
|
|
|
CEN |
EN 12953-9:2007 Shell boilers — Part 9: Requirements for limiting devices of the boiler and accessories |
12.8.2016 |
|
|
|
CEN |
EN 12953-12:2003 Shell boilers — Part 12: Requirements for grate firing systems for solid fuels for the boiler |
12.8.2016 |
|
|
|
CEN |
EN 12953-13:2012 Shell boilers — Part 13: Operating instructions |
12.8.2016 |
|
|
|
CEN |
EN 13121-1:2003 GRP tanks and vessels for use above ground — Part 1: Raw materials — Specification conditions and acceptance conditions |
12.8.2016 |
|
|
|
CEN |
EN 13121-2:2003 GRP tanks and vessels for use above ground — Part 2: Composite materials — Chemical resistance |
12.8.2016 |
|
|
|
CEN |
EN 13121-3:2016 GRP tanks and vessels for use above ground — Part 3: Design and workmanship |
12.8.2016 |
|
|
|
CEN |
EN 13134:2000 Brazing — Procedure approval |
12.8.2016 |
|
|
|
CEN |
EN 13136:2013 Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation |
12.8.2016 |
|
|
|
CEN |
EN 13175:2014 LPG Equipment and accessories — Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
12.8.2016 |
|
|
|
CEN |
EN 13348:2016 Copper and copper alloys — Seamless, round copper tubes for medical gases or vacuum |
12.8.2016 |
|
|
|
CEN |
EN 13371:2001 Cryogenic vessels — Couplings for cryogenic service |
12.8.2016 |
|
|
|
CEN |
EN 13397:2001 Industrial valves — Diaphragm valves made of metallic materials |
12.8.2016 |
|
|
|
CEN |
EN 13445-1:2014 Unfired pressure vessels — Part 1: General |
12.8.2016 |
|
|
|
|
EN 13445-1:2014/A1:2014 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 13445-2:2014 Unfired pressure vessels — Part 2: Materials |
12.8.2016 |
|
|
|
|
EN 13445-2:2014/A1:2016 |
17.11.2017 |
Note 3 |
The date of this publication |
|
CEN |
EN 13445-3:2014 Unfired pressure vessels — Part 3: Design |
12.8.2016 |
|
|
|
|
EN 13445-3:2014/A1:2015 |
12.8.2016 |
Note 3 |
|
|
|
EN 13445-3:2014/A2:2016 |
17.11.2017 |
Note 3 |
The date of this publication |
|
|
EN 13445-3:2014/A3:2017 |
This is the first publication |
Note 3 |
28.2.2018 |
|
CEN |
EN 13445-4:2014 Unfired pressure vessels — Part 4: Fabrication |
12.8.2016 |
|
|
|
CEN |
EN 13445-5:2014 Unfired pressure vessels — Part 5: Inspection and testing |
12.8.2016 |
|
The date of this publication |
|
CEN |
EN 13445-6:2014 Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
12.8.2016 |
|
|
|
CEN |
EN 13445-8:2014 Unfired pressure vessels — Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys |
12.8.2016 |
|
|
|
|
EN 13445-8:2014/A1:2014 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 13458-1:2002 Cryogenic vessels — Static vacuum insulated vessels — Part 1: Fundamental requirements |
12.8.2016 |
|
|
|
CEN |
EN 13458-2:2002 Cryogenic vessels — Static vacuum insulated vessels — Part 2: Design, fabrication, inspection and testing |
12.8.2016 |
|
|
|
|
EN 13458-2:2002/AC:2006 |
12.8.2016 |
|
|
|
CEN |
EN 13480-1:2017 Metallic industrial piping — Part 1: General |
17.11.2017 |
EN 13480-1:2012 Note 2.1 |
15.12.2017 |
|
CEN |
EN 13480-2:2017 Metallic industrial piping — Part 2: Materials |
17.11.2017 |
EN 13480-2:2012 Note 2.1 |
15.12.2017 |
|
CEN |
EN 13480-3:2017 Metallic industrial piping — Part 3: Design and calculation |
17.11.2017 |
EN 13480-3:2012 Note 2.1 |
15.12.2017 |
|
CEN |
EN 13480-4:2012 Metallic industrial piping — Part 4: Fabrication and installation |
12.8.2016 |
|
|
|
|
EN 13480-4:2012/A1:2013 |
12.8.2016 |
Note 3 |
|
|
|
EN 13480-4:2012/A2:2015 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN 13480-5:2017 Metallic industrial piping — Part 5: Inspection and testing |
17.11.2017 |
EN 13480-5:2012 Note 2.1 |
15.12.2017 |
|
CEN |
EN 13480-6:2017 Metallic industrial piping — Part 6: Additional requirements for buried piping |
17.11.2017 |
EN 13480-6:2012 Note 2.1 |
15.12.2017 |
|
CEN |
EN 13480-8:2017 Metallic industrial piping — Part 8: Additional requirements for aluminium and aluminium alloy piping |
17.11.2017 |
EN 13480-8:2012 Note 2.1 |
15.12.2017 |
|
CEN |
EN 13547:2013 Industrial valves — Copper alloy ball valves |
12.8.2016 |
|
|
|
CEN |
EN ISO 13585:2012 Brazing — Qualification test of brazers and brazing operators (ISO 13585:2012) |
12.8.2016 |
|
|
|
CEN |
EN 13648-1:2008 Cryogenic vessels — Safety devices for protection against excessive pressure — Part 1: Safety valves for cryogenic service |
12.8.2016 |
|
|
|
CEN |
EN 13648-2:2002 Cryogenic vessels — Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices for cryogenic service |
12.8.2016 |
|
|
|
CEN |
EN 13709:2010 Industrial valves — Steel globe and globe stop and check valves |
12.8.2016 |
|
|
|
CEN |
EN 13789:2010 Industrial valves — Cast iron globe valves |
12.8.2016 |
|
|
|
CEN |
EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water |
12.8.2016 |
|
|
|
CEN |
EN 13835:2012 Founding — Austenitic cast irons |
12.8.2016 |
|
|
|
CEN |
EN 13923:2005 Filament-wound FRP pressure vessels — Materials, design, manufacturing and testing |
12.8.2016 |
|
|
|
CEN |
EN 14129:2014 LPG Equipment and accessories — Pressure relief valves for LPG pressure vessels |
12.8.2016 |
|
|
|
CEN |
EN 14197-1:2003 Cryogenic vessels — Static non-vacuum insulated vessels — Part 1: Fundamental requirements |
12.8.2016 |
|
|
|
CEN |
EN 14197-2:2003 Cryogenic vessels — Static non-vacuum insulated vessels — Part 2: Design, fabrication, inspection and testing |
12.8.2016 |
|
|
|
|
EN 14197-2:2003/A1:2006 |
12.8.2016 |
Note 3 |
|
|
|
EN 14197-2:2003/AC:2006 |
12.8.2016 |
|
|
|
CEN |
EN 14197-3:2004 Cryogenic vessels — Static non-vacuum insulated vessels — Part 3: Operational requirements |
12.8.2016 |
|
|
|
|
EN 14197-3:2004/A1:2005 |
12.8.2016 |
Note 3 |
|
|
|
EN 14197-3:2004/AC:2004 |
12.8.2016 |
|
|
|
CEN |
EN 14222:2003 Stainless steel shell boilers |
12.8.2016 |
|
|
|
CEN |
EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps — Part 1: Vessels — General requirements |
12.8.2016 |
|
|
|
CEN |
EN 14276-2:2007+A1:2011 Pressure equipment for refrigerating systems and heat pumps — Part 2: Piping — General requirements |
12.8.2016 |
|
|
|
CEN |
EN 14359:2006+A1:2010 Gas-loaded accumulators for fluid power applications |
12.8.2016 |
|
|
|
CEN |
EN 14382:2005+A1:2009 Safety devices for gas pressure regulating stations and installations — Gas safety shut-off devices for inlet pressures up to 100 bar |
12.8.2016 |
|
|
|
|
EN 14382:2005+A1:2009/AC:2009 |
12.8.2016 |
|
|
|
CEN |
EN 14394:2005+A1:2008 Heating boilers — Heating boilers with forced draught burners — Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 oC |
12.8.2016 |
|
|
|
CEN |
EN 14570:2014 LPG equipment and accessories — Equipping of overground and underground LPG vessels |
12.8.2016 |
|
|
|
CEN |
EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications — Part 1: Requirements |
12.8.2016 |
|
|
|
CEN |
EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications |
12.8.2016 |
|
|
|
CEN |
EN 15001-1:2009 Gas Infrastructure — Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations — Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
12.8.2016 |
|
|
|
CEN |
EN ISO 15493:2003 Plastics piping systems for industrial applications — Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) — Specifications for components and the system — Metric series (ISO 15493:2003) |
12.8.2016 |
|
|
|
|
EN ISO 15493:2003/A1:2017 |
17.11.2017 |
Note 3 |
The date of this publication |
|
CEN |
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test (ISO 15613:2004) |
12.8.2016 |
|
|
|
CEN |
EN ISO 15614-1:2004 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) |
12.8.2016 |
|
|
|
|
EN ISO 15614-1:2004/A1:2008 |
12.8.2016 |
Note 3 |
|
|
|
EN ISO 15614-1:2004/A2:2012 |
12.8.2016 |
Note 3 |
|
|
CEN |
EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
12.8.2016 |
|
|
|
|
EN ISO 15614-2:2005/AC:2009 |
12.8.2016 |
|
|
|
CEN |
EN ISO 15614-4:2005 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005) |
12.8.2016 |
|
|
|
|
EN ISO 15614-4:2005/AC:2007 |
12.8.2016 |
|
|
|
CEN |
EN ISO 15614-5:2004 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
12.8.2016 |
|
|
|
CEN |
EN ISO 15614-6:2006 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
12.8.2016 |
|
|
|
CEN |
EN ISO 15614-7:2007 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding (ISO 15614-7:2007) |
12.8.2016 |
|
|
|
CEN |
EN ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) |
12.8.2016 |
|
|
|
CEN |
EN ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
12.8.2016 |
|
|
|
CEN |
EN ISO 15620:2000 Welding — Friction welding of metallic materials (ISO 15620:2000) |
12.8.2016 |
|
|
|
CEN |
EN 15776:2011+A1:2015 Unfired pressure vessels — Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % |
12.8.2016 |
|
|
|
CEN |
EN ISO 16135:2006 Industrial valves — Ball valves of thermoplastics materials (ISO 16135:2006) |
12.8.2016 |
|
|
|
CEN |
EN ISO 16136:2006 Industrial valves — Butterfly valves of thermoplastics materials (ISO 16136:2006) |
12.8.2016 |
|
|
|
CEN |
EN ISO 16137:2006 Industrial valves — Check valves of thermoplastics materials (ISO 16137:2006) |
12.8.2016 |
|
|
|
CEN |
EN ISO 16138:2006 Industrial valves — Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
12.8.2016 |
|
|
|
CEN |
EN ISO 16139:2006 Industrial valves — Gate valves of thermoplastics materials (ISO 16139:2006) |
12.8.2016 |
|
|
|
CEN |
EN 16767:2016 Industrial valves — Steel and cast iron check valves |
12.8.2016 |
|
|
|
CEN |
EN ISO 21009-2:2015 Cryogenic vessels — Static vacuum insulated vessels — Part 2: Operational requirements (ISO 21009-2:2015) |
12.8.2016 |
|
|
|
CEN |
EN ISO 21013-3:2016 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 3: Sizing and capacity determination (ISO 21013-3:2016) |
12.8.2016 |
|
|
|
CEN |
EN ISO 21028-1:2016 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below - 80 oC (ISO 21028-1:2016) |
17.11.2017 |
EN 1252-1:1998 Note 2.1 |
The date of this publication |
|
CEN |
EN ISO 21787:2006 Industrial valves — Globe valves of thermoplastics materials (ISO 21787:2006) |
12.8.2016 |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
9.2.2018 |
EN |
Official Journal of the European Union |
C 49/22 |
Commission communication in the framework of the implementation of Directive 2014/29/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of simple pressure vessels
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2018/C 049/02)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
CEN |
EN ISO 9606-1:2017 Qualification testing of welders — Fusion welding — Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
This is the first publication |
|
|
|
CEN |
EN 10207:2005 Steels for simple pressure vessels — Technical delivery requirements for plates, strips and bars |
20.4.2016 |
|
|
|
CEN |
EN ISO 15614-1:2004 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) |
20.4.2016 |
|
|
|
|
EN ISO 15614-1:2004/A1:2008 |
20.4.2016 |
Note 3 |
|
|
|
EN ISO 15614-1:2004/A2:2012 |
20.4.2016 |
Note 3 |
|
|
CEN |
EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
20.4.2016 |
|
|
|
|
EN ISO 15614-2:2005/AC:2009 |
20.4.2016 |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: CEN: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel. +32 2 5196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, FRANCE. Tel. +33 492944200; fax +33 493654716, (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
9.2.2018 |
EN |
Official Journal of the European Union |
C 49/24 |
Commission communication in the framework of the implementation of Directive 1999/5/EC of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity and Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2018/C 049/03)
Directive 1999/5/EC
In accordance with the transitional provision of Article 48 of Directive 2014/53/EU (1), Member States shall not impede the making available on the market or putting into service of radio equipment covered by Directive 2014/53/EU which is in conformity with Directive 1999/5/EC (2) and which was placed on the market before 13 June 2017. Accordingly, harmonised standards the references to which have been published under Directive 1999/5/EC, as lastly listed in Commission Communication published in the Official Journal of the European Union C 249 of 8 July 2016, p. 1 , and corrected by Corrigendum published in the Official Journal of the European Union C 342 of 17 September 2016, p. 15 , and Corrigendum published in the Official Journal of the European Union C 403 of 1 November 2016, p. 26 , continue to confer a presumption of conformity with that Directive until 12 June 2017.
Directive 2014/53/EU
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
|
ESO (3) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
Standard aims to cover Article(s) of Directive 2014/53/EU |
|
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
|
Cenelec |
EN 50360:2017 Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 50385:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz — 100 GHz), when placed on the market |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 50401:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz — 100 GHz), when put into service |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 50566:2017 Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 55035:2017 Electromagnetic compatibility of multimedia equipment — Immunity requirements CISPR 35:2016 (Modified) |
17.11.2017 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 300 065 V2.1.2 Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 300 086 V2.1.2 Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
9.12.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 300 113 V2.2.1 Land Mobile Service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 219 V2.1.1 Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-2 V3.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-3-1 V2.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz) |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-3-2 V1.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-4 V1.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 224 V2.1.1 Land Mobile Service; Radio Equipment for use in a Paging Service operating within the frequency range 25 MHz — 470 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
13.10.2017 |
EN 300 224-2 V1.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 300 224-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 296 V2.1.1 Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 328 V2.1.1 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 330 V2.1.1 Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 341 V2.1.1 Land Mobile Service; Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 390 V2.1.1 Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-1 V2.1.2 Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Class A Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-2 V2.1.1 Wireless Microphones; Audio PMSE up to 3 GHz; Part 2: Class B Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-3 V2.1.1 Wireless Microphones; Audio PMSE up to 3 GHz; Part 3: Class C Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-4 V2.1.1 Wireless Microphones; Audio PMSE up to 3 GHz; Part 4: Assistive Listening Devices including personal sound amplifiers and inductive systems up to 3 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
This is the first publication |
|
|
Article 3(2) |
|
ETSI |
EN 300 433 V2.1.1 Citizens' Band (CB) radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 440 V2.1.1 Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
14.7.2017 |
EN 300 440-2 V1.4.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
|
This harmonised standard does not address, for receiver categories 2 and 3 as defined in Table 5, the requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 440-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 454-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 487 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Receive-Only Mobile Earth Stations (ROMES) providing data communications operating in the 1,5 GHz frequency band; Radio Frequency (RF) specifications covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 676-2 V2.1.1 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 300 698 V2.1.1 Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 300 698 V2.2.1 Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
15.12.2017 |
EN 300 698 V2.1.1 Note 2.1 |
31.5.2018 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 300 718-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 718-3 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(3)(g) |
|
ETSI |
EN 300 720 V2.1.1 Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 025 V2.1.1 VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
12.8.2016 |
|
|
Article 3(2);Article 3(3)(g) |
|
ETSI |
EN 301 025 V2.2.1 VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.4.2017 |
EN 301 025 V2.1.1 Note 2.1 |
30.11.2018 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 301 091-2 V1.3.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 166 V2.1.1 Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 178 V2.2.2 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 357 V2.1.1 Cordless audio devices in the range 25 MHz to 2 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
14.7.2017 |
EN 301 357-2 V1.4.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 301 357-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 360 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 29,5 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 406 V2.2.2 Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 426 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Low data rate Land Mobile satellite Earth Stations (LMES) and Maritime Mobile satellite Earth Stations (MMES) not intended for distress and safety communications operating in the 1,5 GHz/1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 427 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for low data rate Mobile satellite Earth Stations (MES) except aeronautical mobile satellite earth stations, operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 428 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 430 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11 GHz to 12 GHz/13 GHz to 14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 441 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1,6 GHz/2,4 GHz frequency band under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 442 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for NGSO Mobile Earth Stations (MES) including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 443 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 444 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Land Mobile Earth Stations (LMES) providing voice and/or data communications, operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 447 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 459 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 473 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Aircraft Earth Stations (AES) providing Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS), operating in the frequency band below 3 GHz covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 502 V12.5.2 Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 511 V9.0.2 Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC) |
12.4.2017 |
|
|
Article 3(2) |
|
Notice: This harmonised standard provides presumption of conformity with the essential requirements of Directive 2014/53/EU if also the receiving parameters in clause(s) 4.2.20, 4.2.21 and 4.2.26 are applied |
|||||
|
ETSI |
EN 301 511 V12.5.1 Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
This is the first publication |
EN 301 511 V9.0.2 Note 2.1 |
30.4.2019 |
Article 3(2) |
|
ETSI |
EN 301 559 V2.1.1 Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) and associated Peripherals (LP-AMI-P) operating in the frequency range 2 483,5 MHz to 2 500 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 598 V1.1.1 White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 681 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) under the Mobile Satellite Service (MSS), operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 721 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz frequency band covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 783 V2.1.1 Commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 839 V2.1.1 Ultra Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 841-3 V2.1.1 VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 842-5 V2.1.1 VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 5: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 893 V1.8.1 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 893 V2.1.1 5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 301 893 V1.8.1 Note 2.1 |
12.6.2018 |
Article 3(2) |
|
As regards adaptivity, until 12.6.2018, either clause 4.2.7 of this harmonised standard or clause 4.8 of harmonised standard EN 301 893 v1.8.1 may be used; after that date, only clause 4.2.7 of this harmonised standard may be used. |
|||||
|
ETSI |
EN 301 908-1 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements |
9.12.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-2 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-2 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) |
13.10.2017 |
EN 301 908-2 V11.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 301 908-3 V11.1.3 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-10 V4.2.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonised Standard for IMT-2000, FDMA/TDMA (DECT) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-11 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 11: CDMA Direct Spread (UTRA FDD) Repeaters |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-12 V7.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 12: CDMA Multi-Carrier (cdma2000) Repeaters |
9.9.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-13 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-13 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
13.10.2017 |
EN 301 908-13 V11.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 301 908-14 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-15 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-18 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-19 V6.3.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 19: OFDMA TDD WMAN (Mobile WiMAXTM) TDD User Equipment (UE) |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-20 V6.3.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 20: OFDMA TDD WMAN (Mobile WiMAXTM) TDD Base Stations (BS) |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-21 V6.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 21: OFDMA TDD WMAN (Mobile WiMAXTM) FDD User Equipment (UE) |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-22 V6.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS) |
9.12.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 929 V2.1.1 VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 017 V2.1.1 Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 018 V2.1.1 Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 302 018-2 V1.2.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
|
ETSI |
EN 302 018-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 054 V2.1.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
15.12.2017 |
EN 302 054-2 V1.2.1 Note 2.1 |
31.5.2018 |
Article 3(2) |
|
ETSI |
EN 302 054-2 V1.2.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 064-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 065-1 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Requirements for Generic UWB applications |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-2 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Requirements for UWB location tracking |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-3 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: Requirements for UWB devices for ground based vehicular applications |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-4 V1.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 4: Material Sensing devices using UWB technology below 10,6 GHz |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 066-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 077-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Terrestrial — Digital Audio Broadcasting (T-DAB) service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 186 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 194-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 195 V2.1.1 Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and accessories (ULP-AMI-P) operating in the frequency range 9 kHz to 315 kHz Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 302 208 V3.1.1 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 217-2 V3.1.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 302 217-2-2 V2.2.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
|
ETSI |
EN 302 217-2-2 V2.2.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Digital systems operating in frequency bands where frequency coordination is applied; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
Notice: This harmonised standard provides presumption of conformity with the essential requirements of Directive 2014/53/EU if also the receiving parameters in clause(s) 4.3.1, 4.3.2, 4.3.3 and 4.3.4 are applied |
|||||
|
ETSI |
EN 302 245-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting service Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 248 V2.1.1 Navigation radar for use on non-SOLAS vessels; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 264-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 288-2 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 296-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 326-2 V1.2.2 Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 340 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 372 V2.1.1 Short Range Devices (SRD); Tank Level Probing Radar (TLPR) equipment operating in the frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz, 24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 448 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for tracking Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 454 V2.1.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
15.12.2017 |
EN 302 454-2 V1.2.1 Note 2.1 |
31.5.2018 |
Article 3(2) |
|
ETSI |
EN 302 454-2 V1.2.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 480 V2.1.2 Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 502 V2.1.1 Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 510-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power Active Medical Membrane Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 536-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 537 V2.1.1 Ultra Low Power Medical Data Service (MEDS) Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 561 V2.1.1 Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 567 V1.2.1 Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 571 V2.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-1 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Complementary Ground Component (CGC) for wideband systems |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-2 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: User Equipment (UE) for wideband systems |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-3 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: User Equipment (UE) for narrowband systems |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 608 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment for Eurobalise railway systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 609 V2.1.1 Short Range Devices (SRD); Radio equipment for Euroloop railway systems; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 617-2 V2.1.1 Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 686 V1.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 729 V2.1.1 Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 752 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Active radar target enhancers; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 858-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Automotive radar equipment operating in the 24,05 GHz up to 24,25 GHz or 24,50 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 885 V2.1.1 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 302 885 V2.2.2 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.4.2017 |
EN 302 885 V2.1.1 Note 2.1 |
31.12.2018 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 302 885 V2.2.3 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.5.2017 |
EN 302 885 V2.2.2 Note 2.1 |
31.1.2019 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 302 961 V2.1.2 Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 302 977 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Vehicle-Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 039 V2.1.2 Land Mobile Service; Multichannel transmitter specification for the PMR Service; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 084 V2.1.1 Ground Based Augmentation System (GBAS) VHF ground-air Data Broadcast (VDB); Technical characteristics and methods of measurement for ground-based equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 098 V2.1.1 Maritime low power personal locating devices employing AIS; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 132 V1.1.1 Maritime low power VHF personal locating beacons employing Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 135 V2.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Coastal Surveillance, Vessel Traffic Services and Harbour Radars (CS/VTS/HR); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 203 V2.1.1 Short Range Devices (SRD); Medical Body Area Network Systems (MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.8.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 204 V2.1.2 Network Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 213-6-1 V2.1.1 Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 276 V1.1.1 Maritime Broadband Radiolink operating within the bands 5 852 MHz to 5 872 MHz and/or 5 880 MHz to 5 900 MHz for ships and off-shore installations engaged in coordinated activities; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
15.12.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 339 V1.1.1 Broadband Direct Air-to-Ground Communications; Equipment operating in the 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz frequency bands; Fixed pattern antennas; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 340 V1.1.2 Digital Terrestrial TV Broadcast Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 354 V1.1.1 Amplifiers and active antennas for TV broadcast reception in domestic premises; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 372-1 V1.1.1 Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 372-2 V1.1.1 Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Indoor unit |
9.9.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 402 V2.1.2 Maritime mobile transmitters and receivers for use in the MF and HF bands; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
13.10.2017 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 303 406 V1.1.1 Short Range Devices (SRD); Social Alarms Equipment operating in the frequency range 25 MHz to 1 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 413 V1.1.1 Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
15.12.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 609 V12.5.1 Global System for Mobile communications (GSM); GSM Repeaters; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 978 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 979 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in non-geostationary orbit, operating in the 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 305 550-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (4). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union under Directive 1999/5/EC and Directive 2014/53/EU. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) OJ L 153, 22.5.2014, p. 62.
(3) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(4) OJ C 338, 27.9.2014, p. 31.
|
9.2.2018 |
EN |
Official Journal of the European Union |
C 49/55 |
Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC
(Publication of references of European Assessment Documents in accordance with Article 22 of Regulation (EU) No 305/2011)
(Text with EEA relevance)
(2018/C 049/04)
The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the European Assessment Documents
|
Reference and title of the European Assessment Document |
Reference and title of the superseded European Assessment Document |
Remarks |
|
|
(1) |
(2) |
(3) |
(4) |
|
010001-00-0301 |
Precast concrete composite wall with point connectors |
|
|
|
010003-00-0301 |
Precast balcony elements made of ultra-high performance fibre reinforced concrete (UHPFRC) |
|
|
|
010013-00-0301 |
Lightweight panel made of mortar of cement and granulated EPS reinforced by a glass fibre mesh and an internal steel railing |
|
|
|
020001-01-0405 |
Multi-axis concealed hinge assemblies |
020001-00-0405 |
|
|
020002-00-0404 |
Balcony (and terrace) glazing system without vertical frames |
|
|
|
020011-00-0405 |
Roof, floor, wall and ceiling hatches providing access or for use as an emergency door/with or without fire resistance |
|
|
|
020029-00-1102 |
Internal pedestrian fire resisting and/or smoke control single or double leaf doorsets made of steel |
|
|
|
030019-00-0402 |
Liquid applied roof waterproofing on the basis of polysiloxane |
|
|
|
030218-00-0402 |
Membrane for use as roof underlay |
|
|
|
040005-00-1201 |
Factory-made thermal and/or acoustic insulation products made of vegetable or animal fibres |
|
|
|
040007-00-1201 |
Thermal insulation product for buildings with radiant heat reflective component |
|
|
|
040011-00-1201 |
Vacuum insulation panels (VIP) with factory applied protection layers |
|
|
|
040016-00-0404 |
Glass fibre mesh for reinforcement of cement based renderings |
|
|
|
040037-00-1201 |
Low lambda composite boards made of mineral wool fibres and aerogel additives |
|
|
|
040048-00-0502 |
Rubber fibre mat to be used for impact sound insulation |
|
|
|
040065-00-1201 |
Thermal insulation and/or sound absorbing boards based on expanded polystyrene and cement |
|
|
|
040089-00-0404 |
External Thermal Insulation Composite Systems with renderings for the use on timber frame buildings |
|
|
|
040090-00-1201 |
Factory-made boards and products formed by moulding of an expanded polylactic acid (epla) for thermal and/or acoustical insulation. |
|
|
|
040138-00-1201 |
In-situ formed loose fill thermal and/or acoustic insulation products made of vegetable fibres |
|
|
|
040287-00-0404 |
Kits for external thermal insulation composite system (ETICS) with panels as thermal insulation product and discontinuous claddings as exterior skin |
|
|
|
040288-00-1201 |
Factory-made thermal and acoustic insulations made of polyester fibres |
|
|
|
040313-00-1201 |
In-situ formed loose fill thermal and/or acoustic insulation product made of granulated expanded cork |
|
|
|
040369-00-1201 |
Insulation made of loose-fill or compound granulated expanded cork |
|
|
|
040394-00-1201 |
Factory made cellular glass loose fill |
|
|
|
040456-00-1201 |
In-situ formed loose fill thermal and/or acoustic insulation material made of animal fibres |
|
|
|
040635-00-1201 |
Thermal and/or sound insulation based on bound expanded polystyrene bulk material |
|
|
|
040643-00-1201 |
Fibre reinforced silica aerogel thermal insulation |
|
|
|
040650-00-1201 |
Extruded polystyrene foam boards as load bearing layer and/or thermal insulation outside the waterproofing |
|
|
|
040777-00-1201 |
Cellular glass boards as load bearing layer and thermal insulation outside the waterproofing |
|
|
|
050009-00-0301 |
Spherical and cylindrical bearing with special sliding material made of fluoropolymer |
|
|
|
050013-00-0301 |
Spherical and cylindrical bearing with special sliding material made of filled PTFE with solid lubricant and reinforcing fibres |
|
|
|
060001-00-0802 |
Chimney kit with clay/ceramic flue liner with classification T400 (MINIMUM) N1 W3 GXX |
|
|
|
060003-00-0802 |
Chimney kit with clay/ceramic flue liner and with specific outer wall with classification T400 (minimum) N1 W3 GXX |
|
|
|
060008-00-0802 |
Chimney kit with clay/ceramic flue liner with classification T400 (minimum) N1/P1 W3 Gxx and with different outer walls and possible change of outer wall |
|
|
|
070001-01-0504 |
Gypsum plasterboards for load bearing applications |
070001-00-0504 |
|
|
070002-00-0505 |
Glass fibre joint tape for gypsum plasterboards |
|
|
|
080002-00-0102 |
Non-reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with the aggregate |
|
|
|
090001-00-0404 |
Pre-fabricated compressed mineral wool boards with organic or inorganic finish and with specified fastening system |
|
|
|
090017-00-0404 |
Point supported vertical glazing |
|
|
|
090019-00-0404 |
Kits for ventilated external wall claddings of lightweight boards on subframe with rendering applied in situ with or without thermal insulation |
|
|
|
090020-00-0404 |
Kits for external wall claddings made of agglomerated stone |
|
|
|
090034-00-0404 |
Kit composed by subframe and fixings for fastening cladding and external wall elements |
|
|
|
090035-00-0404 |
Insulated glass unit with structural sealant punctually anchored |
|
|
|
090058-00-0404 |
Ventilated external wall cladding kit comprising a metallic honeycomb panel and its associated fixings |
|
|
|
120001-01-0106 |
Microprismatic retro-reflective sheetings |
120001-00-0106 |
|
|
120003-00-0106 |
Steel lighting columns |
|
|
|
120011-00-0107 |
Flexible plug expansion joints for road bridges with flexible filling based on a synthetic polymer as binder |
|
|
|
130002-00-0304 |
Solid wood slab element — element of dowel jointed timber boards to be used as a structural element in buildings |
|
|
|
130005-00-0304 |
Solid wood slab element to be used as a structural element in buildings |
|
|
|
130010-00-0304 |
Glued laminated timber made of hardwood — structural laminated veneer lumber made of beech |
|
|
|
130011-00-0304 |
Prefabricated wood slab element made of mechanically jointed square-sawn timber members to be used as a structural element in buildings |
|
|
|
130012-00-0304 |
Strength graded structural timber — Square edged logs with wane — Chestnut |
|
|
|
130013-00-0304 |
Solid wood slab element to be used as a structural element in buildings — element of timber boards jointed by dovetail connections |
|
|
|
130019-00-0603 |
Dowel-type fasteners with resin coating |
|
|
|
130022-00-0304 |
Monolithic or laminated beam and wall logs made of timber |
|
|
|
130033-00-0603 |
Nails and screws for use in nailing plates in timber structures |
|
|
|
130087-00-0204 |
Modular construction system |
|
|
|
130090-00-0303 |
Wood-concrete composite slab with dowel-type fasteners |
|
|
|
130118-00-0603 |
Screws for use in timber constructions |
|
|
|
130166-00-0304 |
Strength graded structural timber — steam-cured solid timber with rectangular cross section which may be finger jointed or not — softwood |
|
|
|
130167-00-0304 |
Strength graded structural timber — Square edged logs with wane — Softwood |
|
|
|
130197-00-0304 |
Glued laminated timber made of steam-cured solid timber with rectangular cross section — Softwood |
|
|
|
150001-00-0301 |
Calcium Sulphoaluminate based Cement |
|
|
|
150002-00-0301 |
Calcium aluminate based refractory cement |
|
|
|
150003-00-0301 |
High strength cement |
|
|
|
150004-00-0301 |
Rapid hardening sulfate resistant calcium sulphoaluminate based cement |
|
|
|
150007-00-0301 |
Portland-pozzolana cement for use in tropical conditions |
|
|
|
150008-00-0301 |
Rapid setting cement |
|
|
|
150009-00-0301 |
Blast Furnace Cement CEM III/A with assessment of sulfate resistance (SR) and optional with low effective alkali content (LA) and/or low heat of hydration (LH) |
|
|
|
160004-00-0301 |
Post-tensioning kits for prestressing of structures |
ETAG 013 |
|
|
160027-00-0301 |
Special filling products for post-tensioning kits |
ETAG 013 |
|
|
180008-00-0704 |
Trapped gully — removable — mechanical closure |
|
|
|
180018-00-0704 |
Flexible couplings for gravity and pressure sewerage and drainage pipes |
|
|
|
190002-00-0502 |
Dry floating flooring kit based on prefabricated interlocked units made of ceramic tiles and rubber mats |
|
|
|
190005-00-0402 |
Terrace decking kit |
|
|
|
200001-00-0602 |
Prefabricated steel and stainless steel wire ropes with end connectors |
|
|
|
200002-00-0602 |
Tension rod system |
|
|
|
200005-00-0103 |
Structural steel piles with hollow sections and rigid splices |
|
|
|
200012-00-0401 |
Spacer kits for built-up metal roof and wall cladding |
|
|
|
200014-00-0103 |
Pile joints and rock shoes for concrete piles |
|
|
|
200017-00-0302 |
Hot rolled products and structural components made of steel grades Q235B, Q235D, Q345B AND Q345D |
|
|
|
200019-00-0102 |
Hexagonal woven mesh gabion boxes and matresses |
|
|
|
200020-00-0102 |
Weldmesh gabion boxes and mattresses |
|
|
|
200022-00-0302 |
Thermo-mechanically rolled long steel products made of weldable fine grain structural steel of special steel grades |
|
|
|
200026-00-0102 |
Steel wire mesh systems for reinforced fill |
|
|
|
200032-00-0602 |
Prefabricated tension rod systems with special end connectors |
|
|
|
200033-00-0602 |
Nailed Shear Connector |
|
|
|
200035-00-0302 |
Roof and wall systems with hidden fastenings |
|
|
|
200036-00-0103 |
Kit for micropiles — Kit with hollow bars for self-drilling micropiles — Hollow bars of seamless steel tubes |
|
|
|
200039-00-0102 |
Hexagonal woven mesh gabion boxes and mattresses with zinc coating |
|
|
|
200043-01-0103 |
Pile pipes made of ductile iron |
200043-00-0103 |
|
|
200050-00-0102 |
Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh with pre-coated zinc and/or zinc+organic coating |
|
|
|
200086-00-0602 |
Wire ring connection products |
|
|
|
210004-00-0805 |
Modular element for building services |
|
|
|
210024-00-0504 |
Cement-bonded board |
|
|
|
220006-00-0402 |
Roofing slates made of polypropylene, limestone and fillers |
|
|
|
220007-00-0402 |
Fully supported copper alloy sheet and strip for roofing, external cladding and internal lining |
|
|
|
220008-00-0402 |
Eaves profiles for terraces and balconies |
|
|
|
220010-00-0402 |
Flat plastic sheets for fully supported discontinuous roofing and external cladding |
|
|
|
220013-01-0401 |
Self-supporting ridgelight |
220013-00-0401 |
|
|
220018-00-0401 |
Decentralized energy efficient low-pressure ventilations unit with alternating flow and heat recovery |
|
|
|
220021-00-0402 |
Tubular daylighting devices (TDD) |
|
|
|
220022-00-0401 |
Polycarbonate snow stopper for roof |
|
|
|
220025-00-0401 |
Cantilevered Structural horizontal glazing (structural glass canopy/roof) |
|
|
|
220069-00-0402 |
Flat and profiled (with a pattern) plastic roofing sheets made of recycled material for fully supported discontinuous roofing |
|
|
|
230004-00-0106 |
Wire ring mesh panels |
|
|
|
230005-00-0106 |
Wire rope net panels |
|
|
|
230008-00-0106 |
Double twisted steel wire mesh reinforced or not with ropes |
|
|
|
230011-00-0106 |
Road marking products |
|
|
|
230012-00-0105 |
Additives for asphalt production — bitumen granules made from recycled bituminous roofing felt |
|
|
|
230025-00-0106 |
Flexible facing systems for slope stabilization and rock protection |
|
|
|
260001-00-0303 |
Structural sections made from fibre reinforced polymers (FRP/Glassfiber Composites) |
|
|
|
260002-00-0301 |
Alkali resistant glass fibres containing zirconium dioxide for the use in concrete |
|
|
|
260006-00-0301 |
Polymeric concrete addition |
|
|
|
260007-00-0301 |
Type I addition for concrete, mortar and screed materials — Aqueous solution |
|
|
|
280001-00-0704 |
Preassembled line unit for drainage or infiltration |
|
|
|
290001-00-0701 |
Kit for the transport of cold and hot water inside buildings |
|
|
|
320002-02-0605 |
Coated metal water stop sheet for construction and controlled crack joints in waterproof concrete |
320002-00-0605 320002-01-0605 |
|
|
320008-00-0605 |
Swellable joint sealing tape on the basis of bentonite for construction joints in watertight concrete |
|
|
|
330001-00-0602 |
Expanding Structural Bolting Assemblies for Blind Fastening |
|
|
|
330008-02-0601 |
Anchor channels |
330008-00-0601 330008-01-0601 |
|
|
330011-00-0601 |
Adjustable concrete screws |
|
|
|
330012-00-0601 |
Cast-in anchor with internal threaded socket |
|
|
|
330014-00-0601 |
Mechanical expansion fastener for use in autoclaved aerated concrete |
|
|
|
330046-01-0602 |
Fastening Screws for Metal Members and Sheeting |
330046-00-0602 |
|
|
330047-01-0602 |
Fastening screws for sandwich panels |
330047-00-0602 |
|
|
330075-00-0601 |
Elevator lifting device |
|
|
|
330076-00-0604 |
Metal injection anchors for use in masonry |
ETAG 29 |
|
|
330079-00-0602 |
Floor Fixing Assemblies for use in Checker Plate or Open Bar Grating |
|
|
|
330080-00-0602 |
High Slip Resistance Clamp (HSR) Assembly |
|
|
|
330083-01-0601 |
Power-actuated fastener for multiple use in concrete for non-structural applications |
330083-00-0601 |
|
|
330084-00-0601 |
Steel-plate with cast-in anchors |
|
|
|
330153-00-0602 |
Cartridge fired pin for connections of thin gauge steel members and sheeting |
|
|
|
330155-00-0602 |
Self-adjustable clamp assembly |
|
|
|
330196-01-0604 |
Plastic anchors made of virgin or non-virgin material for fixing of external thermal insulation composite systems with rendering |
330196-00-0604 ETAG 014 |
|
|
330232-00-0601 |
Mechanical fasteners for use in concrete |
ETAG 001-1 ETAG 001-2 ETAG 001-3 ETAG 001-4 |
|
|
330389-00-0601 |
Point connector made of glass fibre reinforced polymer for sandwich walls |
|
|
|
330499-00-0601 |
Bonded fasteners for use in concrete |
ETAG 001-5 |
|
|
330667-00-0602 |
Hot-rolled mounting channel |
|
|
|
330924-00-0601 |
Cast-in anchor bolts of ribbed reinforcing steel |
|
|
|
330965-00-0601 |
Powder-actuated fastener for the fixing of ETICS in concrete |
|
|
|
340002-00-0204 |
Panels of steel wires with incorporated thermal insulation for a whole structure |
|
|
|
340006-00-0506 |
Prefabricated stair kits |
ETAG 008 |
|
|
340020-00-0106 |
Flexible kits for retaining debris flows and shallow landslides/open hill debris flows |
|
|
|
340025-00-0403 |
Substructure kit for heated buildings |
|
|
|
340037-00-0204 |
Light weight steel/wood load bearing roof elements |
|
|
|
350003-00-1109 |
Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of mechanically pre-coated steel sheet) and accessories |
|
|
|
350005-00-1104 |
Intumescent products for fire sealing and fire stopping purposes |
|
|
|
350022-01-1107 |
Kit for closure system for conveyor systems |
350022-00-1107 |
|
|
350134-00-1104 |
Fire proof water trap with intumescent fire seal (combined with a stainless steel floor gully penetration) |
|
|
|
350140-00-1106 |
Renderings and rendering kits for fire resisting applications |
ETAG 018-1 ETAG 018-3 |
|
|
350141-00-1106 |
Linear joint and gap seals |
ETAG 026-1 ETAG 026-3 |
|
|
350142-00-1106 |
Fire protective board, slab and mat products and kits |
ETAG 018-1 ETAG 018-4 |
|
|
350402-00-1106 |
Reactive coatings for fire protection of steel elements |
ETAG 018-1 ETAG 018-2 |
|
|
350454-00-1104 |
Fire stopping and fire sealing products — Penetration seals |
ETAG 026-1 ETAG 026-2 |
|
|
360001-00-0803 |
Ventilation system made of mineral wool covered with film on outside and inside |
|
|
|
360005-00-0604 |
Cavity Tray |
|
|
NOTE:
European Assessment Documents (EAD) are adopted by the European Organisation for Technical Assessment (EOTA) in English. The European Commission is not responsible for the correctness of the titles which have been provided by EOTA for publication in the Official Journal of the European Union.
Publication of the references of European Assessment Documents in the Official Journal of the European Union does not imply that the European Assessment Documents are available in all the official languages of the European Union.
The European Organisation for Technical Assessment (http://www.eota.eu) shall keep the European Assessment Document available by electronic means in line with the provisions of point 8 of Annex II to Regulation (EU) No 305/2011.
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.