ISSN 1977-091X |
||
Official Journal of the European Union |
C 344 |
|
English edition |
Information and Notices |
Volume 60 |
|
|
|
(1) Text with EEA relevance. |
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
13.10.2017 |
EN |
Official Journal of the European Union |
C 344/1 |
Commission communication in the framework of the implementation of Council Directive 89/686/EEC on the approximation of the laws of the Member States relating to personal protective equipment
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2017/C 344/01)
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
||||||||
(1) |
(2) |
(3) |
(4) |
(5) |
||||||||
CEN |
EN 132:1998 Respiratory protective devices — Definitions of terms and pictograms |
4.6.1999 |
EN 132:1990 Note 2.1 |
30.6.1999 |
||||||||
CEN |
EN 133:2001 Respiratory protective devices — Classification |
10.8.2002 |
EN 133:1990 Note 2.1 |
10.8.2002 |
||||||||
CEN |
EN 134:1998 Respiratory protective devices — Nomenclature of components |
13.6.1998 |
EN 134:1990 Note 2.1 |
31.7.1998 |
||||||||
CEN |
EN 135:1998 Respiratory protective devices — List of equivalent terms |
4.6.1999 |
EN 135:1990 Note 2.1 |
30.6.1999 |
||||||||
CEN |
EN 136:1998 Respiratory protective devices — Full face masks — Requirements, testing, marking |
13.6.1998 |
EN 136:1989 EN 136-10:1992 Note 2.1 |
31.7.1998 |
||||||||
|
EN 136:1998/AC:2003 |
|
|
|
||||||||
CEN |
EN 137:2006 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with full face mask — Requirements, testing, marking |
23.11.2007 |
EN 137:1993 Note 2.1 |
23.11.2007 |
||||||||
CEN |
EN 138:1994 Respiratory protective devices — Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly — Requirements, testing, marking |
16.12.1994 |
|
|
||||||||
CEN |
EN 140:1998 Respiratory protective devices — Half masks and quarter masks — Requirements, testing, marking |
6.11.1998 |
EN 140:1989 Note 2.1 |
31.3.1999 |
||||||||
|
EN 140:1998/AC:1999 |
|
|
|
||||||||
CEN |
EN 142:2002 Respiratory protective devices — Mouthpiece assemblies — Requirements, testing, marking |
10.4.2003 |
EN 142:1989 Note 2.1 |
10.4.2003 |
||||||||
CEN |
EN 143:2000 Respiratory protective devices — Particle filters — Requirements, testing, marking |
24.1.2001 |
EN 143:1990 Note 2.1 |
24.1.2001 |
||||||||
|
EN 143:2000/A1:2006 |
21.12.2006 |
Note 3 |
21.12.2006 |
||||||||
|
EN 143:2000/AC:2005 |
|
|
|
||||||||
CEN |
EN 144-1:2000 Respiratory protective devices — Gas cylinder valves — Part 1: Thread connections for insert connector |
24.1.2001 |
EN 144-1:1991 Note 2.1 |
24.1.2001 |
||||||||
|
EN 144-1:2000/A1:2003 |
21.2.2004 |
Note 3 |
21.2.2004 |
||||||||
|
EN 144-1:2000/A2:2005 |
6.10.2005 |
Note 3 |
31.12.2005 |
||||||||
CEN |
EN 144-2:1998 Respiratory protective devices — Gas cylinder valves — Part 2: Outlet connections |
4.6.1999 |
|
|
||||||||
CEN |
EN 144-3:2003 Respiratory protective devices — Gas cylinder valves — Part 3: Outlet connections for diving gases Nitrox and oxygen |
21.2.2004 |
|
|
||||||||
|
EN 144-3:2003/AC:2003 |
|
|
|
||||||||
CEN |
EN 145:1997 Respiratory protective devices — Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type — Requirements, testing, marking |
19.2.1998 |
EN 145:1988 EN 145-2:1992 Note 2.1 |
28.2.1998 |
||||||||
|
EN 145:1997/A1:2000 |
24.1.2001 |
Note 3 |
24.1.2001 |
||||||||
CEN |
EN 148-1:1999 Respiratory protective devices — Threads for facepieces — Part 1: Standard thread connection |
4.6.1999 |
EN 148-1:1987 Note 2.1 |
31.8.1999 |
||||||||
CEN |
EN 148-2:1999 Respiratory protective devices — Threads for facepieces — Part 2: Centre thread connection |
4.6.1999 |
EN 148-2:1987 Note 2.1 |
31.8.1999 |
||||||||
CEN |
EN 148-3:1999 Respiratory protective devices — Threads for facepieces — Part 3: Tread connection M 45 x 3 |
4.6.1999 |
EN 148-3:1992 Note 2.1 |
31.8.1999 |
||||||||
CEN |
EN 149:2001+A1:2009 Respiratory protective devices — Filtering half masks to protect against particles — Requirements, testing, marking |
6.5.2010 |
EN 149:2001 Note 2.1 |
6.5.2010 |
||||||||
CEN |
EN 166:2001 Personal eye-protection — Specifications |
10.8.2002 |
EN 166:1995 Note 2.1 |
10.8.2002 |
||||||||
CEN |
EN 167:2001 Personal eye-protection — Optical test methods |
10.8.2002 |
EN 167:1995 Note 2.1 |
10.8.2002 |
||||||||
CEN |
EN 168:2001 Personal eye-protection — Non-optical test methods |
10.8.2002 |
EN 168:1995 Note 2.1 |
10.8.2002 |
||||||||
CEN |
EN 169:2002 Personal eye-protection — Filters for welding and related techniques — Transmittance requirements and recommended use |
28.8.2003 |
EN 169:1992 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 170:2002 Personal eye-protection — Ultraviolet filters — Transmittance requirements and recommended use |
28.8.2003 |
EN 170:1992 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 171:2002 Personal eye-protection — Infrared filters — Transmittance requirements and recommended use |
10.4.2003 |
EN 171:1992 Note 2.1 |
10.4.2003 |
||||||||
CEN |
EN 172:1994 Personal eye protection — Sunglare filters for industrial use |
15.5.1996 |
|
|
||||||||
|
EN 172:1994/A2:2001 |
10.8.2002 |
Note 3 |
10.8.2002 |
||||||||
|
EN 172:1994/A1:2000 |
4.7.2000 |
Note 3 |
31.10.2000 |
||||||||
CEN |
EN 174:2001 Personal eye-protection — Ski goggles for downhill skiing |
21.12.2001 |
EN 174:1996 Note 2.1 |
21.12.2001 |
||||||||
CEN |
EN 175:1997 Personal protection — Equipment for eye and face protection during welding and allied processes |
19.2.1998 |
|
|
||||||||
CEN |
EN 207:2017 Personal eye-protection equipment — Filters and eye-protectors against laser radiation (laser eye-protectors) |
This is the first publication |
EN 207:2009 Note 2.1 |
30.9.2017 |
||||||||
CEN |
EN 208:2009 Personal eye-protection — Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
6.5.2010 |
EN 208:1998 Note 2.1 |
30.6.2010 |
||||||||
CEN |
EN 250:2014 Respiratory equipment — Open-circuit self-contained compressed air diving apparatus — Requirements, testing and marking |
12.12.2014 |
EN 250:2000 Note 2.1 |
31.12.2014 |
||||||||
CEN |
EN 269:1994 Respiratory protective devices — Powered fresh air hose breathing apparatus incorporating a hood — Requirements, testing, marking |
16.12.1994 |
|
|
||||||||
CEN |
EN 342:2004 Protective clothing — Ensembles and garments for protection against cold |
6.10.2005 |
|
|
||||||||
|
EN 342:2004/AC:2008 |
|
|
|
||||||||
CEN |
EN 343:2003+A1:2007 Protective clothing — Protection against rain |
8.3.2008 |
EN 343:2003 Note 2.1 |
8.3.2008 |
||||||||
|
EN 343:2003+A1:2007/AC:2009 |
|
|
|
||||||||
CEN |
EN 348:1992 Protective clothing — Test method: Determination of behaviour of materials on impact of small splashes of molten metal |
23.12.1993 |
|
|
||||||||
|
EN 348:1992/AC:1993 |
|
|
|
||||||||
CEN |
EN 352-1:2002 Hearing protectors — General requirements — Part 1: Ear-Muffs |
28.8.2003 |
EN 352-1:1993 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 352-2:2002 Hearing protectors — General requirements — Part 2: Ear-plugs |
28.8.2003 |
EN 352-2:1993 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 352-3:2002 Hearing protectors — General requirements — Part 3: Ear-muffs attached to an industrial safety helmet |
28.8.2003 |
EN 352-3:1996 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 352-4:2001 Hearing protectors — Safety requirements and testing — Part 4: Level-dependent ear-muffs |
10.8.2002 |
|
|
||||||||
|
EN 352-4:2001/A1:2005 |
19.4.2006 |
Note 3 |
30.4.2006 |
||||||||
CEN |
EN 352-5:2002 Hearing protectors — Safety requirements and testing — Part 5: Active noise reduction ear-muffs |
28.8.2003 |
|
|
||||||||
|
EN 352-5:2002/A1:2005 |
6.5.2010 |
Note 3 |
6.5.2010 |
||||||||
CEN |
EN 352-6:2002 Hearing protectors — Safety requirements and testing — Part 6: Ear-muffs with electrical audio input |
28.8.2003 |
|
|
||||||||
CEN |
EN 352-7:2002 Hearing protectors — Safety requirements and testing — Part 7: Level-dependent ear-plugs |
28.8.2003 |
|
|
||||||||
CEN |
EN 352-8:2008 Hearing protectors — Safety requirements and testing — Part 8: Entertainment audio ear-muffs |
28.1.2009 |
|
|
||||||||
CEN |
EN 353-1:2014 Personal fall protection equipment — Guided type fall arresters including an anchor line — Part 1: Guided type fall arresters including a rigid anchor line |
11.12.2015 |
|
|
||||||||
CEN |
EN 353-2:2002 Personal protective equipment against falls from a height — Part 2: Guided type fall arresters including a flexible anchor line |
28.8.2003 |
EN 353-2:1992 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 354:2010 Personal fall protection equipment — Lanyards |
9.7.2011 |
EN 354:2002 Note 2.1 |
9.7.2011 |
||||||||
CEN |
EN 355:2002 Personal protective equipment against falls from a height — Energy absorbers |
28.8.2003 |
EN 355:1992 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 358:1999 Personal protective equipment for work positioning and prevention of falls from a height — Belts for work positioning and restraint and work positioning lanyards |
21.12.2001 |
EN 358:1992 Note 2.1 |
21.12.2001 |
||||||||
CEN |
EN 360:2002 Personal protective equipment against falls from a height — Retractable type fall arresters |
28.8.2003 |
EN 360:1992 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 361:2002 Personal protective equipment against falls from a height — Full body harnesses |
28.8.2003 |
EN 361:1992 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 362:2004 Personal protective equipment against falls from a height — Connectors |
6.10.2005 |
EN 362:1992 Note 2.1 |
6.10.2005 |
||||||||
CEN |
EN 363:2008 Personal fall protection equipment — Personal fall protection systems |
20.6.2008 |
EN 363:2002 Note 2.1 |
31.8.2008 |
||||||||
CEN |
EN 364:1992 Personal protective equipment against falls from a height — Test methods |
23.12.1993 |
|
|
||||||||
|
EN 364:1992/AC:1993 |
|
|
|
||||||||
CEN |
EN 365:2004 Personal protective equipment against falls from a height — General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
6.10.2005 |
EN 365:1992 Note 2.1 |
6.10.2005 |
||||||||
|
EN 365:2004/AC:2006 |
|
|
|
||||||||
CEN |
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and microorganisms — Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) |
12.4.2017 |
EN 374-1:2003 Note 2.1 |
31.5.2017 |
||||||||
CEN |
EN 374-2:2003 Protective gloves against chemicals and micro-organisms — Part 2: Determination of resistance to penetration |
6.10.2005 |
EN 374-2:1994 Note 2.1 |
6.10.2005 |
||||||||
CEN |
EN 374-3:2003 Protective gloves against chemicals and micro-organisms — Part 3: Determination of resistance to permeation by chemicals |
6.10.2005 |
EN 374-3:1994 Note 2.1 |
6.10.2005 |
||||||||
|
EN 374-3:2003/AC:2006 |
|
|
|
||||||||
CEN |
EN 374-4:2013 Protective gloves against chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals |
11.4.2014 |
|
|
||||||||
CEN |
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and microorganisms — Part 5: Terminology and performance requirements for microorganisms risks (ISO 374-5:2016) |
12.4.2017 |
|
|
||||||||
CEN |
EN 379:2003+A1:2009 Personal eye-protection — Automatic welding filters |
6.5.2010 |
EN 379:2003 Note 2.1 |
6.5.2010 |
||||||||
CEN |
EN 381-1:1993 Protective clothing for users of hand-held chainsaws — Part 1: Test rig for testing resistance to cutting by a chainsaw |
23.12.1993 |
|
|
||||||||
CEN |
EN 381-2:1995 Protective clothing for users of hand-held chain saws — Part 2: Test methods for leg protectors |
12.1.1996 |
|
|
||||||||
CEN |
EN 381-3:1996 Protective clothing for users of hand-held chain-saws — Part 3: Test methods for footwear |
10.10.1996 |
|
|
||||||||
CEN |
EN 381-4:1999 Protective clothing for users of hand-held chainsaws — Part 4: Test methods for chainsaw protective gloves |
16.3.2000 |
|
|
||||||||
CEN |
EN 381-5:1995 Protective clothing for users of hand-held chain saws — Part 5: Requirements for leg protectors |
12.1.1996 |
|
|
||||||||
CEN |
EN 381-7:1999 Protective clothing for users of hand-held chainsaws — Part 7: Requirements for chainsaw protective gloves |
16.3.2000 |
|
|
||||||||
CEN |
EN 381-8:1997 Protective clothing for users of hand-held chain saws — Part 8: Test methods for chain saw protective gaiters |
18.10.1997 |
|
|
||||||||
CEN |
EN 381-9:1997 Protective clothing for users of hand-held chain saws — Part 9: Requirements for chain saw protective gaiters |
18.10.1997 |
|
|
||||||||
CEN |
EN 381-10:2002 Protective clothing for users of hand-held chainsaws — Part 10: Test method for upper body protectors |
28.8.2003 |
|
|
||||||||
CEN |
EN 381-11:2002 Protective clothing for users of hand-held chainsaws — Part 11: Requirements for upper body protectors |
28.8.2003 |
|
|
||||||||
CEN |
EN 388:2016 Protective gloves against mechanical risks |
12.4.2017 |
EN 388:2003 Note 2.1 |
31.5.2017 |
||||||||
CEN |
EN 397:2012+A1:2012 Industrial safety helmets |
20.12.2012 |
EN 397:2012 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 402:2003 Respiratory protective devices — Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape — Requirements, testing, marking |
21.2.2004 |
EN 402:1993 Note 2.1 |
21.2.2004 |
||||||||
CEN |
EN 403:2004 Respiratory protective devices for self-rescue — Filtering devices with hood for escape from fire — Requirements, testing, marking |
6.10.2005 |
EN 403:1993 Note 2.1 |
6.10.2005 |
||||||||
CEN |
EN 404:2005 Respiratory protective devices for self-rescue — Filter self-rescuer from carbon monoxide with mouthpiece assembly |
6.10.2005 |
EN 404:1993 Note 2.1 |
2.12.2005 |
||||||||
CEN |
EN 405:2001+A1:2009 Respiratory protective devices — Valved filtering half masks to protect against gases or gases and particles — Requirements, testing, marking |
6.5.2010 |
EN 405:2001 Note 2.1 |
6.5.2010 |
||||||||
CEN |
EN 407:2004 Protective gloves against thermal risks (heat and/or fire) |
6.10.2005 |
EN 407:1994 Note 2.1 |
6.10.2005 |
||||||||
CEN |
EN 420:2003+A1:2009 Protective gloves — General requirements and test methods |
6.5.2010 |
EN 420:2003 Note 2.1 |
31.5.2010 |
||||||||
CEN |
EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination |
9.7.2011 |
EN 421:1994 Note 2.1 |
9.7.2011 |
||||||||
CEN |
EN 443:2008 Helmets for fire fighting in buildings and other structures |
20.6.2008 |
EN 443:1997 Note 2.1 |
31.8.2008 |
||||||||
CEN |
EN 458:2004 Hearing protectors — Recommendations for selection, use, care and maintenance — Guidance document |
6.10.2005 |
EN 458:1993 Note 2.1 |
6.10.2005 |
||||||||
CEN |
EN 464:1994 Protective clothing — Protection against liquid and gaseous chemicals, including aerosols and solid particles — Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test) |
16.12.1994 |
|
|
||||||||
CEN |
EN 469:2005 Protective clothing for firefighters — Performance requirements for protective clothing for firefighting |
19.4.2006 |
EN 469:1995 Note 2.1 |
30.6.2006 |
||||||||
|
EN 469:2005/AC:2006 |
|
|
|
||||||||
|
EN 469:2005/A1:2006 |
23.11.2007 |
Note 3 |
23.11.2007 |
||||||||
CEN |
EN 510:1993 Specification for protective clothing for use where there is a risk of entanglement with moving parts |
16.12.1994 |
|
|
||||||||
CEN |
EN 511:2006 Protective gloves against cold |
21.12.2006 |
EN 511:1994 Note 2.1 |
21.12.2006 |
||||||||
CEN |
EN 530:2010 Abrasion resistance of protective clothing material — Test methods |
9.7.2011 |
EN 530:1994 Note 2.1 |
9.7.2011 |
||||||||
CEN |
EN 564:2014 Mountaineering equipment — Accessory cord — Safety requirements and test methods |
11.12.2015 |
EN 564:2006 Note 2.1 |
31.1.2016 |
||||||||
CEN |
EN 565:2006 Mountaineering equipment — Tape — Safety requirements and test methods |
8.3.2008 |
EN 565:1997 Note 2.1 |
8.3.2008 |
||||||||
CEN |
EN 566:2017 Mountaineering equipment — Slings — Safety requirements and test methods |
This is the first publication |
EN 566:2006 Note 2.1 |
30.9.2017 |
||||||||
CEN |
EN 567:2013 Mountaineering equipment — Rope clamps — Safety requirements and test methods |
28.6.2013 |
EN 567:1997 Note 2.1 |
30.9.2013 |
||||||||
CEN |
EN 568:2015 Mountaineering equipment — Ice anchors — Safety requirements and test methods |
9.9.2016 |
EN 568:2007 Note 2.1 |
31.5.2016 |
||||||||
CEN |
EN 569:2007 Mountaineering equipment — Pitons — Safety requirements and test methods |
8.3.2008 |
EN 569:1997 Note 2.1 |
8.3.2008 |
||||||||
CEN |
EN 659:2003+A1:2008 Protective gloves for firefighters |
20.6.2008 |
EN 659:2003 Note 2.1 |
30.9.2008 |
||||||||
|
EN 659:2003+A1:2008/AC:2009 |
|
|
|
||||||||
CEN |
EN 795:2012 Personal fall protection equipment — Anchor devices |
11.12.2015 |
EN 795:1996 Note 2.1 |
9.9.2016 |
||||||||
Warning: This publication does not concern the equipment described in:
|
||||||||||||
CEN |
EN 812:2012 Industrial bump caps |
20.12.2012 |
EN 812:1997 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 813:2008 Personal fall protection equipment — Sit harnesses |
28.1.2009 |
EN 813:1997 Note 2.1 |
28.2.2009 |
||||||||
CEN |
EN 863:1995 Protective clothing — Mechanical properties — Test method: Puncture resistance |
15.5.1996 |
|
|
||||||||
CEN |
EN 892:2012+A1:2016 Mountaineering equipment — Dynamic mountaineering ropes — Safety requirements and test methods |
12.4.2017 |
EN 892:2012 Note 2.1 |
31.5.2017 |
||||||||
CEN |
EN 893:2010 Mountaineering equipment — Crampons — Safety requirements and test methods |
9.7.2011 |
EN 893:1999 Note 2.1 |
9.7.2011 |
||||||||
CEN |
EN 943-1:2015 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols — Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
9.9.2016 |
EN 943-1:2002 Note 2.1 |
29.2.2016 |
||||||||
CEN |
EN 943-2:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles — Part 2: Performance requirements for ‘gas-tight’ (Type 1) chemical protective suits for emergency teams (ET) |
10.8.2002 |
|
|
||||||||
CEN |
EN 958:2017 Mountaineering equipment — Energy absorbing systems for use in klettersteig (via ferrata) climbing — Safety requirements and test methods |
This is the first publication |
EN 958:2006+A1:2010 Note 2.1 |
30.9.2017 |
||||||||
CEN |
EN 960:2006 Headforms for use in the testing of protective helmets |
21.12.2006 |
EN 960:1994 Note 2.1 |
31.12.2006 |
||||||||
CEN |
EN 966:2012+A1:2012 Helmets for airborne sports |
20.12.2012 |
EN 966:2012 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 1073-1:1998 Protective clothing against radioactive contamination — Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactivate contamination |
6.11.1998 |
|
|
||||||||
CEN |
EN 1073-2:2002 Protective clothing against radioactive contamination — Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
28.8.2003 |
|
|
||||||||
CEN |
EN 1077:2007 Helmets for alpine skiers and snowboarders |
8.3.2008 |
EN 1077:1996 Note 2.1 |
8.3.2008 |
||||||||
CEN |
EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates |
20.12.2012 |
EN 1078:2012 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 1080:2013 Impact protection helmets for young children |
28.6.2013 |
EN 1080:1997 Note 2.1 |
31.8.2013 |
||||||||
CEN |
EN 1082-1:1996 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 1: Chain mail gloves and arm guards |
14.6.1997 |
|
|
||||||||
CEN |
EN 1082-2:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 2: Gloves and arm guards made of material other than chain mail |
21.12.2001 |
|
|
||||||||
CEN |
EN 1082-3:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 3: Impact cut test for fabric, leather and other materials |
21.12.2001 |
|
|
||||||||
CEN |
EN 1146:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape — Requirements, testing, marking |
19.4.2006 |
EN 1146:1997 Note 2.1 |
30.4.2006 |
||||||||
CEN |
EN 1149-1:2006 Protective clothing — Electrostatic properties — Part 1: Test method for measurement of surface resistivity |
21.12.2006 |
EN 1149-1:1995 Note 2.1 |
31.12.2006 |
||||||||
CEN |
EN 1149-2:1997 Protective clothing — Electrostatic properties — Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
19.2.1998 |
|
|
||||||||
CEN |
EN 1149-3:2004 Protective clothing — Electrostatic properties — Part 3: Test methods for measurement of charge decay |
6.10.2005 |
|
|
||||||||
CEN |
EN 1149-5:2008 Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements |
20.6.2008 |
|
|
||||||||
CEN |
EN 1150:1999 Protective clothing — Visibility clothing for non-professional use — Test methods and requirements |
4.6.1999 |
|
|
||||||||
CEN |
EN 1385:2012 Helmets for canoeing and white water sports |
20.12.2012 |
EN 1385:1997 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 1486:2007 Protective clothing for fire-fighters — Test methods and requirements for reflective clothing for specialised fire-fighting |
8.3.2008 |
EN 1486:1996 Note 2.1 |
30.4.2008 |
||||||||
CEN |
EN 1497:2007 Personal fall protection equipment — Rescue harnesses |
8.3.2008 |
|
|
||||||||
CEN |
EN 1621-1:2012 Motorcyclists' protective clothing against mechanical impact — Part 1: Motorcyclists' limb joint impact protectors — Requirements and test methods |
13.3.2013 |
EN 1621-1:1997 Note 2.1 |
30.6.2013 |
||||||||
CEN |
EN 1621-2:2014 Motorcyclists' protective clothing against mechanical impact — Part 2: Motorcyclists' back protectors — Requirements and test methods |
12.12.2014 |
EN 1621-2:2003 Note 2.1 |
31.12.2014 |
||||||||
CEN |
EN 1731:2006 Personal eye protection — Mesh eye and face protectors |
23.11.2007 |
EN 1731:1997 Note 2.1 |
23.11.2007 |
||||||||
CEN |
EN 1809:2014+A1:2016 Diving equipment — Buoyancy compensators — Functional and safety requirements, test methods |
9.9.2016 |
EN 1809:2014 Note 2.1 |
30.9.2016 |
||||||||
CEN |
EN 1827:1999+A1:2009 Respiratory protective devices — Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only — Requirements, testing, marking |
6.5.2010 |
EN 1827:1999 Note 2.1 |
6.5.2010 |
||||||||
CEN |
EN 1868:1997 Personal protective equipment against falls from a height — List of equivalent terms |
18.10.1997 |
|
|
||||||||
CEN |
EN 1891:1998 Personal protective equipment for the prevention of falls from a height — Low stretch kernmantel ropes |
6.11.1998 |
|
|
||||||||
CEN |
EN 1938:2010 Personal eye protection — Goggles for motorcycle and moped users |
9.7.2011 |
EN 1938:1998 Note 2.1 |
9.7.2011 |
||||||||
CEN |
EN ISO 4869-2:1995 Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994) |
15.5.1996 |
|
|
||||||||
|
EN ISO 4869-2:1995/AC:2007 |
|
|
|
||||||||
CEN |
EN ISO 4869-3:2007 Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007) |
8.3.2008 |
EN 24869-3:1993 Note 2.1 |
8.3.2008 |
||||||||
CEN |
EN ISO 6529:2001 Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) |
6.10.2005 |
EN 369:1993 Note 2.1 |
6.10.2005 |
||||||||
CEN |
EN ISO 6530:2005 Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
6.10.2005 |
EN 368:1992 Note 2.1 |
6.10.2005 |
||||||||
CEN |
EN ISO 6942:2002 Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
28.8.2003 |
EN 366:1993 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN ISO 9151:2016 Protective clothing against heat and flame — Determination of heat transmission on exposure to flame (ISO 9151:2016, Corrected version 2017-03) |
12.4.2017 |
EN 367:1992 Note 2.1 |
30.6.2017 |
||||||||
CEN |
EN ISO 9185:2007 Protective clothing — Assessment of resistance of materials to molten metal splash (ISO 9185:2007) |
8.3.2008 |
EN 373:1993 Note 2.1 |
8.3.2008 |
||||||||
CEN |
EN ISO 10256:2003 Head and face protection for use in ice hockey (ISO 10256:2003) |
6.10.2005 |
EN 967:1996 Note 2.1 |
6.10.2005 |
||||||||
CEN |
EN ISO 10819:2013 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) |
13.12.2013 |
EN ISO 10819:1996 Note 2.1 |
13.12.2013 |
||||||||
CEN |
EN ISO 10862:2009 Small craft — Quick release system for trapeze harness (ISO 10862:2009) |
6.5.2010 |
|
|
||||||||
CEN |
EN ISO 11611:2015 Protective clothing for use in welding and allied processes (ISO 11611:2015) |
11.12.2015 |
EN ISO 11611:2007 Note 2.1 |
31.1.2016 |
||||||||
CEN |
EN ISO 11612:2015 Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements (ISO 11612:2015) |
11.12.2015 |
EN ISO 11612:2008 Note 2.1 |
31.1.2016 |
||||||||
CEN |
EN 12021:2014 Respiratory equipment — Compressed gases for breathing apparatus |
12.12.2014 |
|
|
||||||||
CEN |
EN 12083:1998 Respiratory protective devices — Filters with breathing hoses, (Non-mask mounted filters) — Particle filters, gas filters, and combined filters — Requirements, testing, marking |
4.7.2000 |
|
|
||||||||
|
EN 12083:1998/AC:2000 |
|
|
|
||||||||
CEN |
EN ISO 12127-1:2015 Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015) |
9.9.2016 |
EN 702:1994 Note 2.1 |
30.6.2016 |
||||||||
CEN |
EN ISO 12127-2:2007 Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007) |
8.3.2008 |
|
|
||||||||
CEN |
EN 12270:2013 Mountaineering equipment — Chocks — Safety requirements and test methods |
11.4.2014 |
EN 12270:1998 Note 2.1 |
31.5.2014 |
||||||||
CEN |
EN 12275:2013 Mountaineering equipment — Connectors — Safety requirements and test methods |
13.12.2013 |
EN 12275:1998 Note 2.1 |
13.12.2013 |
||||||||
CEN |
EN 12276:2013 Mountaineering equipment — Frictional anchors — Safety requirements and test methods |
11.4.2014 |
EN 12276:1998 Note 2.1 |
31.5.2014 |
||||||||
CEN |
EN 12277:2015 Mountaineering equipment — Harnesses — Safety requirements and test methods |
12.4.2017 |
EN 12277:2007 Note 2.1 |
31.5.2017 |
||||||||
CEN |
EN 12278:2007 Montaineering equipment — Pulleys — Safety requirements and test methods |
23.11.2007 |
EN 12278:1998 Note 2.1 |
30.11.2007 |
||||||||
CEN |
EN ISO 12311:2013 Personal protective equipment — Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15) |
13.12.2013 |
|
|
||||||||
CEN |
EN ISO 12312-1:2013 Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use (ISO 12312-1:2013) |
13.12.2013 |
EN 1836:2005+A1:2007 Note 2.3 |
28.2.2015 |
||||||||
CEN |
EN ISO 12312-2:2015 Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun (ISO 12312-2:2015) |
11.12.2015 |
|
|
||||||||
CEN |
EN ISO 12401:2009 Small craft — Deck safety harness and safety line — Safety requirements and test methods (ISO 12401:2009) |
6.5.2010 |
EN 1095:1998 Note 2.1 |
6.5.2010 |
||||||||
CEN |
EN ISO 12402-2:2006 Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements (ISO 12402-2:2006) |
21.12.2006 |
EN 399:1993 Note 2.1 |
31.3.2007 |
||||||||
|
EN ISO 12402-2:2006/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
CEN |
EN ISO 12402-3:2006 Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements (ISO 12402-3:2006) |
21.12.2006 |
EN 396:1993 Note 2.1 |
31.3.2007 |
||||||||
|
EN ISO 12402-3:2006/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
CEN |
EN ISO 12402-4:2006 Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements (ISO 12402-4:2006) |
21.12.2006 |
EN 395:1993 Note 2.1 |
31.3.2007 |
||||||||
|
EN ISO 12402-4:2006/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
CEN |
EN ISO 12402-5:2006 Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements (ISO 12402-5:2006) |
21.12.2006 |
EN 393:1993 Note 2.1 |
31.3.2007 |
||||||||
|
EN ISO 12402-5:2006/AC:2006 |
|
|
|
||||||||
|
EN ISO 12402-5:2006/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
CEN |
EN ISO 12402-6:2006 Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods (ISO 12402-6:2006) |
21.12.2006 |
|
|
||||||||
|
EN ISO 12402-6:2006/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
CEN |
EN ISO 12402-8:2006 Personal flotation devices — Part 8: Accessories — Safety requirements and test methods (ISO 12402-8:2006) |
2.8.2006 |
EN 394:1993 Note 2.1 |
31.8.2006 |
||||||||
|
EN ISO 12402-8:2006/A1:2011 |
11.11.2011 |
Note 3 |
11.11.2011 |
||||||||
CEN |
EN ISO 12402-9:2006 Personal flotation devices — Part 9: Test methods (ISO 12402-9:2006) |
21.12.2006 |
|
|
||||||||
|
EN ISO 12402-9:2006/A1:2011 |
11.11.2011 |
Note 3 |
11.11.2011 |
||||||||
CEN |
EN ISO 12402-10:2006 Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006) |
2.8.2006 |
|
|
||||||||
CEN |
EN 12477:2001 Protective gloves for welders |
10.8.2002 |
|
|
||||||||
|
EN 12477:2001/A1:2005 |
6.10.2005 |
Note 3 |
31.12.2005 |
||||||||
CEN |
EN 12492:2012 Mountaineering equipment — Helmets for mountaineers — Safety requirements and test methods |
20.12.2012 |
EN 12492:2000 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 12628:1999 Diving accessories — Combined buoyancy and rescue devices — Functional and safety requirements, test methods |
4.7.2000 |
|
|
||||||||
|
EN 12628:1999/AC:2000 |
|
|
|
||||||||
CEN |
EN 12841:2006 Personal fall protection equipment — Rope access systems — Rope adjustment devices |
21.12.2006 |
|
|
||||||||
CEN |
EN 12941:1998 Respiratory protective devices — Powered filtering devices incorporating a helmet or a hood — Requirements, testing, marking |
4.6.1999 |
EN 146:1991 Note 2.1 |
4.6.1999 |
||||||||
|
EN 12941:1998/A1:2003 |
6.10.2005 |
Note 3 |
6.10.2005 |
||||||||
|
EN 12941:1998/A2:2008 |
5.6.2009 |
Note 3 |
5.6.2009 |
||||||||
CEN |
EN 12942:1998 Respiratory protective devices — Power assisted filtering devices incorporating full face masks, half masks or quarter masks — Requirements, testing, marking |
4.6.1999 |
EN 147:1991 Note 2.1 |
4.6.1999 |
||||||||
|
EN 12942:1998/A1:2002 |
28.8.2003 |
Note 3 |
28.8.2003 |
||||||||
|
EN 12942:1998/A2:2008 |
5.6.2009 |
Note 3 |
5.6.2009 |
||||||||
CEN |
EN 13034:2005+A1:2009 Protective clothing against liquid chemicals — Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
6.5.2010 |
EN 13034:2005 Note 2.1 |
6.5.2010 |
||||||||
CEN |
EN 13061:2009 Protective clothing — Shin guards for association football players — Requirements and test methods |
6.5.2010 |
EN 13061:2001 Note 2.1 |
6.5.2010 |
||||||||
CEN |
EN 13087-1:2000 Protective helmets — Test methods — Part 1: Conditions and conditioning |
10.8.2002 |
|
|
||||||||
|
EN 13087-1:2000/A1:2001 |
10.8.2002 |
Note 3 |
10.8.2002 |
||||||||
CEN |
EN 13087-2:2012 Protective helmets — Test methods — Part 2: Shock absorption |
20.12.2012 |
EN 13087-2:2000 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 13087-3:2000 Protective helmets — Test methods — Part 3: Resistance to penetration |
10.8.2002 |
|
|
||||||||
|
EN 13087-3:2000/A1:2001 |
10.8.2002 |
Note 3 |
10.8.2002 |
||||||||
CEN |
EN 13087-4:2012 Protective helmets — Test methods — Part 4: Retention system effectiveness |
20.12.2012 |
EN 13087-4:2000 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 13087-5:2012 Protective helmets — Test methods — Part 5: Retention system strength |
20.12.2012 |
EN 13087-5:2000 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 13087-6:2012 Protective helmets — Test methods — Part 6: Field of vision |
20.12.2012 |
EN 13087-6:2000 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 13087-7:2000 Protective helmets — Test methods — Part 7: Flame resistance |
10.8.2002 |
|
|
||||||||
|
EN 13087-7:2000/A1:2001 |
10.8.2002 |
Note 3 |
10.8.2002 |
||||||||
CEN |
EN 13087-8:2000 Protective helmets — Test methods — Part 8: Electrical properties |
21.12.2001 |
|
|
||||||||
|
EN 13087-8:2000/A1:2005 |
6.10.2005 |
Note 3 |
6.10.2005 |
||||||||
CEN |
EN 13087-10:2012 Protective helmets — Test methods — Part 10: Resistance to radiant heat |
20.12.2012 |
EN 13087-10:2000 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 13089:2011 Mountaineering equipment — Ice-tools — Safety requirements and test methods |
9.7.2011 |
|
|
||||||||
CEN |
EN 13138-1:2008 Buoyant aids for swimming instruction — Part 1: Safety requirements and test methods for buoyant aids to be worn |
5.6.2009 |
EN 13138-1:2003 Note 2.1 |
5.6.2009 |
||||||||
CEN |
EN 13158:2009 Protective clothing — Protective jackets, body and shoulder protectors for equestrian use: For horse riders and those working with horses, and for horse drivers — Requirements and test methods |
6.5.2010 |
EN 13158:2000 Note 2.1 |
6.5.2010 |
||||||||
CEN |
EN 13178:2000 Personal eye-protection — Eye protectors for snowmobile users |
21.12.2001 |
|
|
||||||||
CEN |
EN 13274-1:2001 Respiratory protective devices — Methods of test — Part 1: Determination of inward leakage and total inward leakage |
21.12.2001 |
|
|
||||||||
CEN |
EN 13274-2:2001 Respiratory protective devices — Methods of test — Part 2: Practical performance tests |
21.12.2001 |
|
|
||||||||
CEN |
EN 13274-3:2001 Respiratory protective devices — Methods of test — Part 3: Determination of breathing resistance |
10.8.2002 |
|
|
||||||||
CEN |
EN 13274-4:2001 Respiratory protective devices — Methods of test — Part 4: Flame tests |
10.8.2002 |
|
|
||||||||
CEN |
EN 13274-5:2001 Respiratory protective devices — Methods of test — Part 5: Climatic conditions |
21.12.2001 |
|
|
||||||||
CEN |
EN 13274-6:2001 Respiratory protective devices — Methods of test — Part 6: Determination of carbon dioxide content of the inhalation air |
10.8.2002 |
|
|
||||||||
CEN |
EN 13274-7:2008 Respiratory protective devices — Methods of test — Part 7: Determination of particle filter penetration |
20.6.2008 |
EN 13274-7:2002 Note 2.1 |
31.7.2008 |
||||||||
CEN |
EN 13274-8:2002 Respiratory protective devices — Methods of test — Part 8: Determination of dolomite dust clogging |
28.8.2003 |
|
|
||||||||
CEN |
EN 13277-1:2000 Protective equipment for martial arts — Part 1: General requirements and test methods |
24.2.2001 |
|
|
||||||||
CEN |
EN 13277-2:2000 Protective equipment for martial arts — Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
24.2.2001 |
|
|
||||||||
CEN |
EN 13277-3:2013 Protective equipment for martial arts — Part 3: Additional requirements and test methods for trunk protectors |
11.4.2014 |
EN 13277-3:2000 Note 2.1 |
30.6.2014 |
||||||||
CEN |
EN 13277-4:2001 Protective equipment for martial arts — Part 4: Additional requirements and test methods for head protectors |
10.8.2002 |
|
|
||||||||
|
EN 13277-4:2001/A1:2007 |
23.11.2007 |
Note 3 |
31.12.2007 |
||||||||
CEN |
EN 13277-5:2002 Protective equipment for martial arts — Part 5: Additional requirements and test methods for genital protectors and abdominal protectors |
10.8.2002 |
|
|
||||||||
CEN |
EN 13277-6:2003 Protective equipment for martial arts — Part 6: Additional requirements and test methods for breast protectors for females |
21.2.2004 |
|
|
||||||||
CEN |
EN 13277-7:2009 Protective equipment for martial arts — Part 7: Additional requirements and test methods for hand and foot protectors |
6.5.2010 |
|
|
||||||||
CEN |
EN ISO 13287:2012 Personal protective equipment — Footwear — Test method for slip resistance (ISO 13287:2012) |
13.3.2013 |
EN ISO 13287:2007 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 13356:2001 Visibility accessories for non-professional use — Test methods and requirements |
21.12.2001 |
|
|
||||||||
CEN |
EN 13484:2012 Helmets for users of luges |
20.12.2012 |
EN 13484:2001 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 13546:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players — Requirements and test methods |
23.11.2007 |
EN 13546:2002 Note 2.1 |
31.12.2007 |
||||||||
CEN |
EN 13567:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, genital and face protectors for fencers — Requirements and test methods |
23.11.2007 |
EN 13567:2002 Note 2.1 |
31.12.2007 |
||||||||
CEN |
EN 13594:2015 Protective gloves for motorcycle riders — Requirements and test methods |
11.12.2015 |
EN 13594:2002 Note 2.1 |
31.8.2017 |
||||||||
CEN |
EN 13595-1:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one piece or divided suits — Part 1: General requirements |
28.8.2003 |
|
|
||||||||
CEN |
EN 13595-2:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 2: Test method for determination of impact abrasion resistance |
28.8.2003 |
|
|
||||||||
CEN |
EN 13595-3:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 3: Test method for determination of burst strength |
28.8.2003 |
|
|
||||||||
CEN |
EN 13595-4:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 4: Test method for determination of impact cut resistance |
28.8.2003 |
|
|
||||||||
CEN |
EN 13634:2010 Protective footwear for motorcycle riders — Requirements and test methods |
9.7.2011 |
EN 13634:2002 Note 2.1 |
9.7.2011 |
||||||||
CEN |
EN ISO 13688:2013 Protective clothing — General requirements (ISO 13688:2013) |
13.12.2013 |
EN 340:2003 Note 2.1 |
31.1.2014 |
||||||||
CEN |
EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
20.12.2012 |
EN 13781:2001 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 13794:2002 Respiratory protective devices — Self-contained closed-circuit breathing apparatus for escape — Requirements, testing, marking |
28.8.2003 |
EN 400:1993 EN 401:1993 EN 1061:1996 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 13819-1:2002 Hearing protectors — Testing — Part 1: Physical test methods |
28.8.2003 |
|
|
||||||||
CEN |
EN 13819-2:2002 Hearing protectors — Testing — Part 2: Acoustic test methods |
28.8.2003 |
|
|
||||||||
CEN |
EN 13832-1:2006 Footwear protecting against chemicals — Part 1: Terminology and test methods |
21.12.2006 |
|
|
||||||||
CEN |
EN 13832-2:2006 Footwear protecting against chemicals — Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
21.12.2006 |
|
|
||||||||
CEN |
EN 13832-3:2006 Footwear protecting against chemicals — Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
21.12.2006 |
|
|
||||||||
CEN |
EN 13911:2004 Protective clothing for firefighters — Requirements and test methods for fire hoods for firefighters |
6.10.2005 |
|
|
||||||||
CEN |
EN 13921:2007 Personal protective equipment — Ergonomic principles |
23.11.2007 |
|
|
||||||||
CEN |
EN 13949:2003 Respiratory equipment — Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen — Requirements, testing, marking |
21.2.2004 |
|
|
||||||||
CEN |
EN ISO 13982-1:2004 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004) |
6.10.2005 |
|
|
||||||||
|
EN ISO 13982-1:2004/A1:2010 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
CEN |
EN ISO 13982-2:2004 Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004) |
6.10.2005 |
|
|
||||||||
CEN |
EN ISO 13995:2000 Protective clothing — Mechanical properties — Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) |
6.10.2005 |
|
|
||||||||
CEN |
EN ISO 13997:1999 Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects (ISO 13997:1999) |
4.7.2000 |
|
|
||||||||
|
EN ISO 13997:1999/AC:2000 |
|
|
|
||||||||
CEN |
EN ISO 13998:2003 Protective clothing — Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
28.8.2003 |
EN 412:1993 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris — Requirements and test methods |
6.10.2005 |
|
|
||||||||
CEN |
EN 14052:2012+A1:2012 High performance industrial helmets |
20.12.2012 |
EN 14052:2012 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 14058:2004 Protective clothing — Garments for protection against cool environments |
6.10.2005 |
|
|
||||||||
CEN |
EN ISO 14116:2015 Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing (ISO 14116:2015) |
11.12.2015 |
EN ISO 14116:2008 Note 2.1 |
31.1.2016 |
||||||||
CEN |
EN 14120:2003+A1:2007 Protective clothing — Wrist, palm, knee and elbow protectors for users of roller sports equipment — Requirements and test methods |
23.11.2007 |
EN 14120:2003 Note 2.1 |
31.12.2007 |
||||||||
CEN |
EN 14126:2003 Protective clothing — Performance requirements and tests methods for protective clothing against infective agents |
6.10.2005 |
|
|
||||||||
|
EN 14126:2003/AC:2004 |
|
|
|
||||||||
CEN |
EN 14143:2013 Respiratory equipment — Self-contained re-breathing diving apparatus |
13.12.2013 |
EN 14143:2003 Note 2.1 |
31.1.2014 |
||||||||
CEN |
EN 14225-1:2005 Diving suits — Part 1: Wet suits — Requirements and test methods |
6.10.2005 |
|
|
||||||||
CEN |
EN 14225-2:2005 Diving suits — Part 2: Dry suits — Requirements and test methods |
6.10.2005 |
|
|
||||||||
CEN |
EN 14225-3:2005 Diving suits — Part 3: Actively heated or cooled suits (systems) — Requirements and test methods |
6.10.2005 |
|
|
||||||||
CEN |
EN 14225-4:2005 Diving suits — Part 4: One atmosphere suits (ADS) — Human factors requirements and test methods |
6.10.2005 |
|
|
||||||||
CEN |
EN 14325:2004 Protective clothing against chemicals — Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
6.10.2005 |
|
|
||||||||
CEN |
EN 14328:2005 Protective clothing — Gloves and armguards protecting against cuts by powered knives — Requirements and test methods |
6.10.2005 |
|
|
||||||||
CEN |
EN 14360:2004 Protective clothing against rain — Test method for ready made garments — Impact from above with high energy droplets |
6.10.2005 |
|
|
||||||||
CEN |
EN 14387:2004+A1:2008 Respiratory protective devices — Gas filter(s) and combined filter(s) — Requirements, testing, marking |
20.6.2008 |
EN 14387:2004 Note 2.1 |
31.7.2008 |
||||||||
CEN |
EN 14404:2004+A1:2010 Personal protective equipment — Knee protectors for work in the kneeling position |
6.5.2010 |
EN 14404:2004 Note 2.1 |
31.7.2010 |
||||||||
CEN |
EN 14435:2004 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only — Requirements, testing, marking |
6.10.2005 |
|
|
||||||||
CEN |
EN 14458:2004 Personal eye-equipment — Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
6.10.2005 |
|
|
||||||||
CEN |
EN ISO 14460:1999 Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods (ISO 14460:1999) |
16.3.2000 |
|
|
||||||||
|
EN ISO 14460:1999/AC:1999 |
|
|
|
||||||||
|
EN ISO 14460:1999/A1:2002 |
10.8.2002 |
Note 3 |
30.9.2002 |
||||||||
CEN |
EN 14529:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
19.4.2006 |
|
|
||||||||
CEN |
EN 14593-1:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 1: Apparatus with a full face mask — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 Note 2.1 |
2.12.2005 |
||||||||
CEN |
EN 14593-2:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 2: Apparatus with a half mask at positive pressure — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 Note 2.1 |
2.12.2005 |
||||||||
|
EN 14593-2:2005/AC:2005 |
|
|
|
||||||||
CEN |
EN 14594:2005 Respiratory protective devices — Continuous flow compressed air line breathing apparatus — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 EN 270:1994 EN 271:1995 EN 1835:1999 EN 12419:1999 Note 2.1 |
2.12.2005 |
||||||||
|
EN 14594:2005/AC:2005 |
|
|
|
||||||||
CEN |
EN 14605:2005+A1:2009 Protective clothing against liquid chemicals — performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
6.5.2010 |
EN 14605:2005 Note 2.1 |
6.5.2010 |
||||||||
CEN |
EN 14786:2006 Protective clothing — Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions — Atomizer test |
21.12.2006 |
|
|
||||||||
CEN |
EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
28.8.2003 |
|
|
||||||||
CEN |
EN ISO 15025:2002 Protective clothing — Protection against heat and flame — Method of test for limited flame spread (ISO 15025:2000) |
28.8.2003 |
EN 532:1994 Note 2.1 |
28.8.2003 |
||||||||
CEN |
EN ISO 15027-1:2012 Immersion suits — Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
13.3.2013 |
EN ISO 15027-1:2002 Note 2.1 |
31.5.2013 |
||||||||
CEN |
EN ISO 15027-2:2012 Immersion suits — Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
13.3.2013 |
EN ISO 15027-2:2002 Note 2.1 |
31.5.2013 |
||||||||
CEN |
EN ISO 15027-3:2012 Immersion suits — Part 3: Test methods (ISO 15027-3:2012) |
13.3.2013 |
EN ISO 15027-3:2002 Note 2.1 |
31.5.2013 |
||||||||
CEN |
EN 15090:2012 Footwear for firefighters |
20.12.2012 |
EN 15090:2006 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN 15151-1:2012 Mountaineering equipment — Braking devices — Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
20.12.2012 |
|
|
||||||||
CEN |
EN 15333-1:2008 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 1: Demand apparatus |
20.6.2008 |
|
|
||||||||
|
EN 15333-1:2008/AC:2009 |
|
|
|
||||||||
CEN |
EN 15333-2:2009 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 2: Free flow apparatus |
6.5.2010 |
|
|
||||||||
CEN |
EN 15613:2008 Knee and elbow protectors for indoor sports — Safety requirements and test methods |
5.6.2009 |
|
|
||||||||
CEN |
EN 15614:2007 Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland clothing |
23.11.2007 |
|
|
||||||||
CEN |
EN ISO 15831:2004 Clothing — Physiological effects — Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004) |
6.10.2005 |
|
|
||||||||
CEN |
EN 16027:2011 Protective clothing — Gloves with protective effect for association football goal keepers |
16.2.2012 |
|
|
||||||||
CEN |
EN 16350:2014 Protective gloves — Electrostatic properties |
12.12.2014 |
|
|
||||||||
CEN |
EN 16473:2014 Firefighters helmets — Helmets for technical rescue |
11.12.2015 |
|
|
||||||||
CEN |
EN 16689:2017 Protective clothing for firefighters — Performance requirements for protective clothing for technical rescue |
This is the first publication |
|
|
||||||||
CEN |
EN 16716:2017 Mountaineering equipment — Avalanche airbag systems — Safety requirements and test methods |
This is the first publication |
|
|
||||||||
CEN |
EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) |
11.4.2014 |
EN ISO 17249:2004 Note 2.1 |
30.11.2015 |
||||||||
|
EN ISO 17249:2013/AC:2014 |
|
|
|
||||||||
CEN |
EN ISO 17491-3:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008) |
28.1.2009 |
EN 463:1994 Note 2.1 |
28.2.2009 |
||||||||
CEN |
EN ISO 17491-4:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008) |
28.1.2009 |
EN 468:1994 Note 2.1 |
28.2.2009 |
||||||||
CEN |
EN ISO 20344:2011 Personal protective equipment — Test methods for footwear (ISO 20344:2011) |
16.2.2012 |
EN ISO 20344:2004 Note 2.1 |
30.6.2012 |
||||||||
CEN |
EN ISO 20345:2011 Personal protective equipment — Safety footwear (ISO 20345:2011) |
16.2.2012 |
EN ISO 20345:2004 Note 2.1 |
30.6.2013 |
||||||||
CEN |
EN ISO 20346:2014 Personal protective equipment — Protective footwear (ISO 20346:2014) |
12.12.2014 |
EN ISO 20346:2004 Note 2.1 |
31.12.2014 |
||||||||
CEN |
EN ISO 20347:2012 Personal protective equipment — Occupational footwear (ISO 20347:2012) |
20.12.2012 |
EN ISO 20347:2004 Note 2.1 |
30.4.2013 |
||||||||
CEN |
EN ISO 20349:2010 Personal protective equipment — Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding — Requirements and test method (ISO 20349:2010) |
9.7.2011 |
|
|
||||||||
CEN |
EN ISO 20471:2013 High visibility clothing — Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) |
28.6.2013 |
EN 471:2003+A1:2007 Note 2.1 |
30.9.2013 |
||||||||
|
EN ISO 20471:2013/A1:2016 |
12.4.2017 |
Note 3 |
31.5.2017 |
||||||||
CEN |
EN 24869-1:1992 Acoustics — Hearing protectors — Subjective method for the measurement of sound attenuation (ISO 4869-1:1990) |
16.12.1994 |
|
|
||||||||
Cenelec |
EN 50286:1999 Electrical insulating protective clothing for low-voltage installations |
16.3.2000 |
|
|
||||||||
Cenelec |
EN 50321:1999 Electrically insulating footwear for working on low voltage installations |
16.3.2000 |
|
|
||||||||
Cenelec |
EN 50365:2002 Electrically insulating helmets for use on low voltage installations |
10.4.2003 |
|
|
||||||||
Cenelec |
EN 60743:2001 Live working — Terminology for tools, equipment and devices IEC 60743:2001 |
10.4.2003 |
EN 60743:1996 Note 2.1 |
1.12.2004 |
||||||||
|
EN 60743:2001/A1:2008 IEC 60743:2001/A1:2008 |
9.7.2011 |
Note 3 |
9.7.2011 |
||||||||
Cenelec |
EN 60895:2003 Live working — Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. IEC 60895:2002 (Modified) |
6.10.2005 |
EN 60895:1996 Note 2.1 |
1.7.2006 |
||||||||
Cenelec |
EN 60903:2003 Live working — Gloves of insulating material IEC 60903:2002 (Modified) |
6.10.2005 |
EN 50237:1997 EN 60903:1992 + A11:1997 Note 2.1 |
1.7.2006 |
||||||||
Cenelec |
EN 60984:1992 Sleeves of insulating material for live working IEC 60984:1990 (Modified) |
4.6.1999 |
|
|
||||||||
|
EN 60984:1992/A11:1997 |
4.6.1999 |
Note 3 |
4.6.1999 |
||||||||
|
EN 60984:1992/A1:2002 IEC 60984:1990/A1:2002 |
10.4.2003 |
Note 3 |
6.10.2005 |
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
— |
CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
— |
Cenelec: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
13.10.2017 |
EN |
Official Journal of the European Union |
C 344/32 |
Commission communication in the framework of the implementation of Directive 1999/5/EC of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity and Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2017/C 344/02)
Directive 1999/5/EC
In accordance with the transitional provision of Article 48 of Directive 2014/53/EU (1), Member States shall not impede the making available on the market or putting into service of radio equipment covered by Directive 2014/53/EU which is in conformity with Directive 1999/5/EC (2) and which was placed on the market before 13 June 2017. Accordingly, harmonised standards the references to which have been published under Directive 1999/5/EC, as lastly listed in Commission Communication published in the Official Journal of the European Union C 249 of 8 July 2016, p. 1, and corrected by Corrigendum published in the Official Journal of the European Union C 342 of 17 September 2016, p. 15, and Corrigendum published in the Official Journal of the European Union C 403 of 1 November 2016, p. 26, continue to confer a presumption of conformity with that Directive until 12 June 2017.
Directive 2014/53/EU
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
ESO (3) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
Standard aims to cover Article(s) of Directive 2014/53/EU |
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
ETSI |
EN 300 065 V2.1.2 Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2); Article 3(3)(g) |
ETSI |
EN 300 086 V2.1.2 Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
9.12.2016 |
|
|
Article 3(2) |
ETSI |
EN 300 113 V2.2.1 Land Mobile Service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 219 V2.1.1 Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 220-2 V3.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 220-3-1 V2.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz) |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 220-3-2 V1.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 220-4 V1.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 224 V2.1.1 Land Mobile Service; Radio Equipment for use in a Paging Service operating within the frequency range 25 MHz — 470 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
This is the first publication |
EN 300 224-2 V1.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
ETSI |
EN 300 224-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 300 296 V2.1.1 Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 328 V2.1.1 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 330 V2.1.1 Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 341 V2.1.1 Land Mobile Service; Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 390 V2.1.1 Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 422-1 V2.1.2 Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Class A Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.2.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 422-2 V2.1.1 Wireless Microphones; Audio PMSE up to 3 GHz; Part 2: Class B Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 422-3 V2.1.1 Wireless Microphones; Audio PMSE up to 3 GHz; Part 3: Class C Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 433 V2.1.1 Citizens' Band (CB) radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 440 V2.1.1 Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
14.7.2017 |
EN 300 440-2 V1.4.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
This harmonised standard does not address, for receiver categories 2 and 3 as defined in Table 5, the requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 300 440-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 300 454-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 300 487 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Receive-Only Mobile Earth Stations (ROMES) providing data communications operating in the 1,5 GHz frequency band; Radio Frequency (RF) specifications covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 300 676-2 V2.1.1 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
ETSI |
EN 300 698 V2.1.1 Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2); Article 3(3)(g) |
ETSI |
EN 300 718-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 300 718-3 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(3)(g) |
ETSI |
EN 300 720 V2.1.1 Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 025 V2.1.1 VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
12.8.2016 |
|
|
Article 3(2); Article 3(3)(g) |
ETSI |
EN 301 025 V2.2.1 VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.4.2017 |
EN 301 025 V2.1.1 Note 2.1 |
30.11.2018 |
Article 3(2);Article 3(3)(g) |
ETSI |
EN 301 091-2 V1.3.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 301 166 V2.1.1 Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.2.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 178 V2.2.2 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 357 V2.1.1 Cordless audio devices in the range 25 MHz to 2 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
14.7.2017 |
EN 301 357-2 V1.4.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
ETSI |
EN 301 357-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 301 360 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 29,5 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 406 V2.2.2 Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 426 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Low data rate Land Mobile satellite Earth Stations (LMES) and Maritime Mobile satellite Earth Stations (MMES) not intended for distress and safety communications operating in the 1,5 GHz/1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 427 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for low data rate Mobile satellite Earth Stations (MES) except aeronautical mobile satellite earth stations, operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 428 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 430 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11 GHz to 12 GHz/13 GHz to 14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
14.10.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 441 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1,6 GHz/2,4 GHz frequency band under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 442 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for NGSO Mobile Earth Stations (MES) including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 443 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 444 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Land Mobile Earth Stations (LMES) providing voice and/or data communications, operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 447 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 459 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
14.10.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 473 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Aircraft Earth Stations (AES) providing Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS), operating in the frequency band below 3 GHz covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 502 V12.5.2 Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 511 V9.0.2 Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC) |
12.4.2017 |
|
|
Article 3(2) |
Notice: This harmonised standard provides presumption of conformity with the essential requirements of Directive 2014/53/EU if also the receiving parameters in clause(s) 4.2.20, 4.2.21 and 4.2.26 are applied |
|||||
ETSI |
EN 301 559 V2.1.1 Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) and associated Peripherals (LP-AMI-P) operating in the frequency range 2 483,5 MHz to 2 500 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 598 V1.1.1 White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 301 681 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) under the Mobile Satellite Service (MSS), operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 721 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz frequency band covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 783 V2.1.1 Commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 839 V2.1.1 Ultra Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 841-3 V2.1.1 VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 842-5 V2.1.1 VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 5: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 893 V1.8.1 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 301 893 V2.1.1 5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 301 893 V1.8.1 Note 2.1 |
12.6.2018 |
Article 3(2) |
As regards adaptivity, until 12.6.2018, either clause 4.2.7 of this harmonised standard or clause 4.8 of harmonised standard EN 301 893 v1.8.1 may be used; after that date, only clause 4.2.7 of this harmonised standard may be used. |
|||||
ETSI |
EN 301 908-1 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements |
9.12.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 908-2 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 908-2 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) |
This is the first publication |
EN 301 908-2 V11.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
ETSI |
EN 301 908-3 V11.1.3 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) |
12.5.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 908-10 V4.2.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonised Standard for IMT-2000, FDMA/TDMA (DECT) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 908-11 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 11: CDMA Direct Spread (UTRA FDD) Repeaters |
10.2.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 908-12 V7.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 12: CDMA Multi-Carrier (cdma2000) Repeaters |
9.9.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 908-13 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
12.5.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 908-13 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
This is the first publication |
EN 301 908-13 V11.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
ETSI |
EN 301 908-14 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) |
12.5.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 908-15 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters |
10.2.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 908-18 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) |
12.5.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 908-19 V6.3.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 19: OFDMA TDD WMAN (Mobile WiMAXTM) TDD User Equipment (UE) |
8.6.2017 |
|
|
Article 3(2) |
ETSI |
EN 301 908-20 V6.3.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 20: OFDMA TDD WMAN (Mobile WiMAXTM) TDD Base Stations (BS) |
14.10.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 908-21 V6.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 21: OFDMA TDD WMAN (Mobile WiMAXTM) FDD User Equipment (UE) |
14.10.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 908-22 V6.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS) |
9.12.2016 |
|
|
Article 3(2) |
ETSI |
EN 301 929 V2.1.1 VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 017 V2.1.1 Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 018 V2.1.1 Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 302 018-2 V1.2.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
ETSI |
EN 302 018-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 054-2 V1.2.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 064-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 065-1 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Requirements for Generic UWB applications |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 065-2 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Requirements for UWB location tracking |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 065-3 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: Requirements for UWB devices for ground based vehicular applications |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 065-4 V1.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 4: Material Sensing devices using UWB technology below 10,6 GHz |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 066-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall-Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 077-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Terrestrial — Digital Audio Broadcasting (T-DAB) service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 186 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 194-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 195 V2.1.1 Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and accessories (ULP-AMI-P) operating in the frequency range 9 kHz to 315 kHz Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 302 208 V3.1.1 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 217-2 V3.1.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 302 217-2-2 V2.2.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
ETSI |
EN 302 217-2-2 V2.2.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Digital systems operating in frequency bands where frequency coordination is applied; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
Notice: This harmonised standard provides presumption of conformity with the essential requirements of Directive 2014/53/EU if also the receiving parameters in clause(s) 4.3.1, 4.3.2, 4.3.3 and 4.3.4 are applied |
|||||
ETSI |
EN 302 245-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting service Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 248 V2.1.1 Navigation radar for use on non-SOLAS vessels; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 264-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 288-2 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 296-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 326-2 V1.2.2 Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 340 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 372 V2.1.1 Short Range Devices (SRD); Tank Level Probing Radar (TLPR) equipment operating in the frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz, 24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 448 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for tracking Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 454-2 V1.2.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 480 V2.1.2 Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 502 V2.1.1 Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 510-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power Active Medical Membrane Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 536-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 537 V2.1.1 Ultra Low Power Medical Data Service (MEDS) Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 561 V2.1.1 Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 567 V1.2.1 Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 571 V2.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 574-1 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Complementary Ground Component (CGC) for wideband systems |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 574-2 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: User Equipment (UE) for wideband systems |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 574-3 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: User Equipment (UE) for narrowband systems |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 608 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment for Eurobalise railway systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 609 V2.1.1 Short Range Devices (SRD); Radio equipment for Euroloop railway systems; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 617-2 V2.1.1 Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 686 V1.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 729 V2.1.1 Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
ETSI |
EN 302 752 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Active radar target enhancers; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 858-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Automotive radar equipment operating in the 24,05 GHz up to 24,25 GHz or 24,50 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
ETSI |
EN 302 885 V2.1.1 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2); Article 3(3)(g) |
ETSI |
EN 302 885 V2.2.2 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.4.2017 |
EN 302 885 V2.1.1 Note 2.1 |
31.12.2018 |
Article 3(2); Article 3(3)(g) |
ETSI |
EN 302 885 V2.2.3 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.5.2017 |
EN 302 885 V2.2.2 Note 2.1 |
31.1.2019 |
Article 3(2); Article 3(3)(g) |
ETSI |
EN 302 961 V2.1.2 Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 302 977 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Vehicle-Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 303 039 V2.1.2 Land Mobile Service; Multichannel transmitter specification for the PMR Service; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 303 084 V2.1.1 Ground Based Augmentation System (GBAS) VHF ground-air Data Broadcast (VDB); Technical characteristics and methods of measurement for ground-based equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 303 098 V2.1.1 Maritime low power personal locating devices employing AIS; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 303 132 V1.1.1 Maritime low power VHF personal locating beacons employing Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
ETSI |
EN 303 135 V2.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Coastal Surveillance, Vessel Traffic Services and Harbour Radars (CS/VTS/HR); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 303 203 V2.1.1 Short Range Devices (SRD); Medical Body Area Network Systems (MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.8.2016 |
|
|
Article 3(2) |
ETSI |
EN 303 204 V2.1.2 Network Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 303 213-6-1 V2.1.1 Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 303 339 V1.1.1 Broadband Direct Air-to-Ground Communications; Equipment operating in the 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz frequency bands; Fixed pattern antennas; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 303 340 V1.1.2 Digital Terrestrial TV Broadcast Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 303 354 V1.1.1 Amplifiers and active antennas for TV broadcast reception in domestic premises; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
ETSI |
EN 303 372-1 V1.1.1 Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 303 372-2 V1.1.1 Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Indoor unit |
9.9.2016 |
|
|
Article 3(2) |
ETSI |
EN 303 402 V2.1.2 Maritime mobile transmitters and receivers for use in the MF and HF bands; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
This is the first publication |
|
|
Article 3(2); Article 3(3)(g) |
ETSI |
EN 303 406 V1.1.1 Short Range Devices (SRD); Social Alarms Equipment operating in the frequency range 25 MHz to 1 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
ETSI |
EN 303 609 V12.5.1 Global System for Mobile communications (GSM); GSM Repeaters; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
ETSI |
EN 303 978 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 303 979 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in non-geostationary orbit, operating in the 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
ETSI |
EN 305 550-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (4). |
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
— |
This list replaces all the previous lists published in the Official Journal of the European Union under Directive 1999/5/EC and Directive 2014/53/EU. The European Commission ensures the updating of this list. |
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) OJ L 153, 22.5.2014, p. 62.
(3) ESO: European standardisation organisation:
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(4) OJ C 338, 27.9.2014, p. 31.