ISSN 1725-2423
doi:10.3000/17252423.C_2010.097.eng
Official Journal
of the European Union
C 97
English edition
Information and Notices
Volume 53
16 April 2010
|
ISSN 1725-2423 doi:10.3000/17252423.C_2010.097.eng |
||
|
Official Journal of the European Union |
C 97 |
|
|
|
||
|
English edition |
Information and Notices |
Volume 53 |
|
|
|
|
|
(1) Text with EEA relevance |
|
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
16.4.2010 |
EN |
Official Journal of the European Union |
C 97/1 |
Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and of the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
(Text with EEA relevance)
(Publication of titles and references of harmonised standards under the directive)
2010/C 97/01
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
First publication in the Official Journal |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
CEN |
EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements |
This is the first publication |
|
|
|
CEN |
EN 1010-1:2004 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
30.11.2005 |
|
|
|
CEN |
EN 1010-2:2006 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
20.7.2006 |
|
|
|
CEN |
EN 1127-1:2007 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
11.4.2008 |
EN 1127-1:1997 Note 2.1 |
Date expired (28.12.2009) |
|
CEN |
EN 1127-2:2002+A1:2008 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
20.8.2008 |
EN 1127-2:2002 Note 2.1 |
Date expired (28.12.2009) |
|
CEN |
EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines |
20.8.2008 |
EN 1710:2005 Note 2.1 |
Date expired (28.12.2009) |
|
CEN |
EN 1755:2000+A1:2009 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
This is the first publication |
EN 1755:2000 Note 2.1 |
The date of this publication |
|
CEN |
EN 1834-1:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
21.7.2001 |
|
|
|
CEN |
EN 1834-2:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
21.7.2001 |
|
|
|
CEN |
EN 1834-3:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
21.7.2001 |
|
|
|
CEN |
EN 1839:2003 Determination of explosion limits of gases and vapours |
12.8.2004 |
|
|
|
CEN |
EN 12581:2005 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
9.3.2006 |
|
|
|
CEN |
EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
20.7.2006 |
|
|
|
CEN |
EN 12757-1:2005 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
9.3.2006 |
|
|
|
CEN |
EN 12874:2001 Flame arresters - Performance requirements, test methods and limits for use |
7.9.2002 |
|
|
|
CEN |
EN 13012:2001 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
22.1.2002 |
|
|
|
CEN |
EN 13160-1:2003 Leak detection systems - Part 1: General principles |
14.8.2003 |
|
|
|
CEN |
EN 13237:2003 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
14.8.2003 |
|
|
|
CEN |
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
This is the first publication |
EN 13463-1:2001 Note 2.1 |
The date of this publication |
|
CEN |
EN 13463-2:2004 Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure ‘fr’ |
30.11.2005 |
|
|
|
CEN |
EN 13463-3:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure ‘d’ |
30.11.2005 |
|
|
|
CEN |
EN 13463-5:2003 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety ‘c’ |
12.8.2004 |
|
|
|
CEN |
EN 13463-6:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source ‘b’ |
30.11.2005 |
|
|
|
CEN |
EN 13463-8:2003 Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion ‘k’ |
12.8.2004 |
|
|
|
CEN |
EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels |
9.3.2006 |
|
|
|
EN 13616:2004/AC:2006 |
|
|
|
|
|
CEN |
EN 13617-2:2004 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
30.11.2005 |
|
|
|
CEN |
EN 13617-3:2004 Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
30.11.2005 |
|
|
|
CEN |
EN 13673-1:2003 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure |
14.8.2003 |
|
|
|
CEN |
EN 13673-2:2005 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise |
30.11.2005 |
|
|
|
CEN |
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
24.1.2004 |
|
|
|
CEN |
EN 13821:2002 Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures |
20.5.2003 |
|
|
|
CEN |
EN 13980:2002 Potentially explosive atmospheres - Application of quality systems |
20.5.2003 |
|
|
|
CEN |
EN 14034-1:2004 Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
30.11.2005 |
|
|
|
CEN |
EN 14034-2:2006 Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
15.12.2006 |
|
|
|
CEN |
EN 14034-3:2006 Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds |
15.12.2006 |
|
|
|
CEN |
EN 14034-4:2004 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
30.11.2005 |
|
|
|
CEN |
EN 14373:2005 Explosion suppression systems |
9.3.2006 |
|
|
|
CEN |
EN 14460:2006 Explosion resistant equipment |
15.12.2006 |
|
|
|
CEN |
EN 14491:2006 Dust explosion venting protective systems |
15.12.2006 |
|
|
|
EN 14491:2006/AC:2008 |
|
|
|
|
|
CEN |
EN 14492-1:2006+A1:2009 Cranes - Power driven winches and hoists - Part 1: Power driven winches |
This is the first publication |
EN 14492-1:2006 Note 2.1 |
30.4.2010 |
|
CEN |
EN 14492-2:2006+A1:2009 Cranes - Power driven winches and hoists - Part 2: Power driven hoists |
This is the first publication |
EN 14492-2:2006 Note 2.1 |
(31.3.2010) |
|
CEN |
EN 14522:2005 Determination of the auto ignition temperature of gases and vapours |
30.11.2005 |
|
|
|
CEN |
EN 14591-1:2004 Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure |
9.3.2006 |
|
|
|
EN 14591-1:2004/AC:2006 |
|
|
|
|
|
CEN |
EN 14591-2:2007 Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers |
12.12.2007 |
|
|
|
EN 14591-2:2007/AC:2008 |
|
|
|
|
|
CEN |
EN 14591-4:2007 Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers |
12.12.2007 |
|
|
|
EN 14591-4:2007/AC:2008 |
|
|
|
|
|
CEN |
EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
20.8.2008 |
|
|
|
CEN |
EN 14678-1:2006+A1:2009 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
This is the first publication |
EN 14678-1:2006 Note 2.1 |
The date of this publication |
|
CEN |
EN 14681:2006 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
15.12.2006 |
|
|
|
CEN |
EN 14756:2006 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours |
12.12.2007 |
|
|
|
CEN |
EN 14797:2006 Explosion venting devices |
12.12.2007 |
|
|
|
CEN |
EN 14983:2007 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
12.12.2007 |
|
|
|
CEN |
EN 14986:2007 Design of fans working in potentially explosive atmospheres |
12.12.2007 |
|
|
|
CEN |
EN 14994:2007 Gas explosion venting protective systems |
12.12.2007 |
|
|
|
CEN |
EN 15089:2009 Explosion isolation systems |
This is the first publication |
|
|
|
CEN |
EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations |
12.12.2007 |
|
|
|
CEN |
EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
12.12.2007 |
|
|
|
CEN |
EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
12.12.2007 |
|
|
|
CEN |
EN 15268:2008 Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
27.1.2009 |
|
|
|
CEN |
EN 15794:2009 Determination of explosion points of flammable liquids |
This is the first publication |
|
|
|
Cenelec |
EN 50050:2006 Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
20.8.2008 |
|
|
|
Cenelec |
EN 50104:2002 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods |
12.8.2004 |
EN 50104:1998 Note 2.1 |
Date expired (1.2.2005) |
|
EN 50104:2002/A1:2004 |
12.8.2004 |
Note 3 |
Date expired (1.8.2004) |
|
|
Cenelec |
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
This is the first publication |
|
|
|
Cenelec |
EN 50177:2009 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements |
This is the first publication |
|
|
|
Cenelec |
EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1: General requirements and test methods |
6.11.1999 |
|
|
|
EN 50241-1:1999/A1:2004 |
12.8.2004 |
Note 3 |
Date expired (1.8.2004) |
|
|
Cenelec |
EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2: Performance requirements for apparatus for the detection of combustible gases |
6.11.1999 |
|
|
|
Cenelec |
EN 50281-2-1:1998 Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust |
6.11.1999 |
|
|
|
Cenelec |
EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
7.9.2002 |
|
|
|
Cenelec |
EN 50381:2004 Transportable ventilated rooms with or without an internal source of release |
9.3.2006 |
|
|
|
Cenelec |
EN 60079-0:2009 Explosive atmospheres - Part 0: Equipment - General requirements IEC 60079-0:2007 |
This is the first publication |
EN 60079-0:2006 + EN 61241-0:2006 Note 2.1 |
1.6.2012 |
|
Cenelec |
EN 60079-1:2007 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures ‘d’ IEC 60079-1:2007 |
11.4.2008 |
EN 60079-1:2004 Note 2.1 |
1.7.2010 |
|
Cenelec |
EN 60079-2:2007 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure ‘p’ IEC 60079-2:2007 |
20.8.2008 |
EN 60079-2:2004 Note 2.1 |
1.11.2010 |
|
Cenelec |
EN 60079-5:2007 Explosive atmospheres - Part 5: Equipment protection by powder filling ‘q’ IEC 60079-5:2007 |
20.8.2008 |
EN 50017:1998 Note 2.1 |
1.11.2010 |
|
Cenelec |
EN 60079-6:2007 Explosive atmospheres - Part 6: Equipment protection by oil immersion ‘o’ IEC 60079-6:2007 |
20.8.2008 |
EN 50015:1998 Note 2.1 |
1.5.2010 |
|
Cenelec |
EN 60079-7:2007 Explosive atmospheres - Part 7: Equipment protection by increased safety ‘e’ IEC 60079-7:2006 |
11.4.2008 |
EN 60079-7:2003 Note 2.1 |
Date expired (1.10.2009) |
|
Cenelec |
EN 60079-11:2007 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety ‘i’ IEC 60079-11:2006 |
11.4.2008 |
EN 50020:2002 Note 2.1 |
Date expired (1.10.2009) |
|
Cenelec |
EN 60079-15:2005 Electrical apparatus for explosive gas atmospheres - Part 15: Construction, test and marking of type of protection ‘n’ electrical apparatus IEC 60079-15:2005 |
20.7.2006 |
EN 60079-15:2003 Note 2.1 |
Date expired (1.6.2008) |
|
Cenelec |
EN 60079-18:2004 Electrical apparatus for explosive gas atmospheres - Part 18: Construction, test and marking of type of protection encapsulation ‘m’ electrical apparatus IEC 60079-18:2004 |
20.7.2006 |
|
|
|
Cenelec |
EN 60079-25:2004 Electrical apparatus for explosive gas atmospheres - Part 25: Intrinsically safe systems IEC 60079-25:2003 |
20.8.2008 |
|
|
|
Cenelec |
EN 60079-26:2007 Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga IEC 60079-26:2006 |
20.8.2008 |
|
|
|
Cenelec |
EN 60079-27:2008 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) IEC 60079-27:2008 |
This is the first publication |
EN 60079-27:2006 Note 2.1 |
1.4.2011 |
|
Cenelec |
EN 60079-28:2007 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation IEC 60079-28:2006 |
11.4.2008 |
|
|
|
Cenelec |
EN 60079-29-1:2007 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases IEC 60079-29-1:2007 (Modified) |
20.8.2008 |
EN 61779-1:2000 and its amendment + EN 61779-2:2000 + EN 61779-3:2000 + EN 61779-4:2000 + EN 61779-5:2000 Note 2.1 |
1.11.2010 |
|
Cenelec |
EN 60079-30-1:2007 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements IEC 60079-30-1:2007 |
20.8.2008 |
|
|
|
Cenelec |
EN 61241-1:2004 Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures ‘tD’ IEC 61241-1:2004 |
20.8.2008 |
EN 50281-1-1:1998 + A1:2002 Note 2.1 |
Date expired (1.10.2008) |
|
Cenelec |
EN 61241-4:2006 Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection ‘pD’ IEC 61241-4:2001 |
20.8.2008 |
|
|
|
Cenelec |
EN 61241-11:2006 Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety ‘iD’ IEC 61241-11:2005 |
11.4.2008 |
|
|
|
Cenelec |
EN 61241-18:2004 Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation ‘mD’ IEC 61241-18:2004 |
11.4.2008 |
|
|
|
Cenelec |
EN 62013-1:2006 Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion IEC 62013-1:2005 |
20.8.2008 |
EN 62013-1:2002 Note 2.1 |
Date expired (1.2.2009) |
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and of the Council (2) amended by the Directive 98/48/EC (3). |
|
— |
Harmonised standards are adopted by the European Standardisation Organisations in English (CEN and CENELEC also publish in French and German). Subsequently, the titles of the harmonised standards are translated into all other required official languages of the European Union by the National Standards Bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list. |
|
— |
More information about harmonised standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European Standards Organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Brussels, BELGIUM Tel.+32 2 5500811; fax +32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, 1000 Brussels, BELGIUM Tel.+32 2 5196871; fax +32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE Tel.+33 492 944200; fax +33 493 654716 (http://www.etsi.eu) |
(2) OJ L 204, 21.7.1998, p. 37.
(3) OJ L 217, 5.8.1998, p. 18.
|
16.4.2010 |
EN |
Official Journal of the European Union |
C 97/11 |
Commission communication in the framework of the implementation of the Council Directive 96/48/EC of 23 July 1996 on the interoperability of the trans-European high-speed rail system
(Text with EEA relevance)
(Publication of titles and references of harmonised standards under the directive)
2010/C 97/02
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
CEN |
EN ISO 3095:2005 Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles (ISO 3095:2005) |
|
|
|
CEN |
EN ISO 3381:2005 Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
|
|
|
CEN |
EN 12082:2007 Railway applications - Axleboxes - Performance testing |
|
|
|
CEN |
EN 12663:2000 Railway applications - Structural requirements of railway vehicle bodies |
|
|
|
CEN |
EN 13103:2009 Railway applications - Wheelsets and bogies - Non-powered axles - Design method |
|
|
|
CEN |
EN 13104:2009 Railway applications - Wheelsets and bogies - Powered axles - Design method |
|
|
|
CEN |
EN 13129-1:2002 Railway applications - Air conditioning for main line rolling stock - Part 1: Comfort parameters |
|
|
|
CEN |
EN 13129-2:2004 Railway applications - Air conditioning for main line rolling stock - Part 2: Type tests |
|
|
|
CEN |
EN 13232-4:2005 Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection |
|
|
|
CEN |
EN 13232-5:2005 Railway applications - Track - Switches and crossings - Part 5: Switches |
|
|
|
CEN |
EN 13232-6:2005 Railway applications - Track - Switches and crossings - Part 6: Fixed common and obtuse crossings |
|
|
|
CEN |
EN 13232-7:2006 Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts |
|
|
|
CEN |
EN 13232-8:2007 Railway applications - Track - Switches and crossings - Part 8: Expansion devices |
|
|
|
CEN |
EN 13232-9:2006 Railway applications - Track - Switches and crossings - Part 9: Layouts |
|
|
|
CEN |
EN 13260:2009 Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
EN 13260:2003 Note 2.1 |
Date expired (30.9.2009) |
|
CEN |
EN 13261:2009 Railway applications - Wheelsets and bogies - Axles - Product requirements |
|
|
|
CEN |
EN 13262:2004+A1:2008 Railway applications - Wheelsets and bogies - Wheels - Product requirements |
EN 13262:2004 Note 2.1 |
Date expired (31.5.2009) |
|
CEN |
EN 13272:2001 Railway applications - Electrical lighting for rolling stock in public transport systems |
|
|
|
CEN |
EN 13481-1:2002 Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions |
|
|
|
|
EN 13481-1:2002/A1:2006 |
Note 3 |
Date expired (28.2.2007) |
|
CEN |
EN 13481-2:2002 Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
|
|
|
|
EN 13481-2:2002/A1:2006 |
Note 3 |
Date expired (28.2.2007) |
|
CEN |
EN 13481-5:2002 Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track |
|
|
|
|
EN 13481-5:2002/A1:2006 |
Note 3 |
Date expired (28.2.2007) |
|
CEN |
EN 13674-1:2003+A1:2007 Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
EN 13674-1:2003 Note 2.1 |
Date expired (31.5.2008) |
|
CEN |
EN 13674-2:2006 Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
|
|
|
CEN |
EN 13674-3:2006 Railway applications - Track - Rail - Part 3: Check rails |
|
|
|
CEN |
EN 13715:2006 Railway applications - Wheelsets and bogies - Wheels - Wheels tread |
|
|
|
CEN |
EN 13848-1:2003+A1:2008 Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry |
EN 13848-1:2003 Note 2.1 |
Date expired (31.1.2009) |
|
CEN |
EN 13848-5:2008 Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels |
|
|
|
CEN |
EN 14067-5:2006 Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels |
|
|
|
CEN |
EN 14363:2005 Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests |
|
|
|
CEN |
EN 14531-1:2005 Railway applications - Methods for calculation of stopping distances, slowing distances and immobilization braking - Part 1: General algorithms |
|
|
|
CEN |
EN 14535-1:2005 Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
|
|
|
CEN |
EN 14601:2005 Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
|
|
|
CEN |
EN 14752:2005 Railway applications - Bodyside entrance systems |
|
|
|
CEN |
EN 14813-1:2006 Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters |
|
|
|
CEN |
EN 14813-2:2006 Railway applications - Air conditioning for driving cabs - Part 2: Type tests |
|
|
|
CEN |
EN 15020:2006 Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods |
|
|
|
CEN |
EN 15152:2007 Railway applications - Front windscreens for train cabs |
|
|
|
CEN |
EN 15153-1:2007 Railway applications - External visible and audible warning devices for high speed trains - Part 1: Head, marker and tail lamps |
|
|
|
CEN |
EN 15153-2:2007 Railway applications - External visible and audible warning devices for high speed trains - Part 2: Warning horns |
|
|
|
CEN |
EN 15220-1:2008 Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators |
|
|
|
CEN |
EN 15227:2008 Railway applications - Crashworthiness requirements for railway vehicle bodies |
|
|
|
CEN |
EN 15302:2008 Railway applications - Method for determining the equivalent conicity |
|
|
|
CEN |
EN 15327-1:2008 Railway applications - Passenger alarm subsystem - Part 1: General requirements and passenger interface for the passenger emergency brake system |
|
|
|
CEN |
EN 15355:2008 Railway applications - Braking - Distributor valves and distributor-isolating devices |
|
|
|
CEN |
EN 15427:2008 Railway applications - Wheel/rail friction management - Flange lubrication |
|
|
|
CEN |
EN 15551:2009 Railway applications - Railway rolling stock - Buffers |
|
|
|
CEN |
EN 15566:2009 Railway applications - Railway rolling stock - Draw gear and screw coupling |
|
|
|
CEN |
EN 15595:2009 Railway applications - Braking - Wheel slide protection |
|
|
|
CEN |
EN 15611:2008 Railway applications - Braking - Relay valves |
|
|
|
CEN |
EN 15612:2008 Railway applications - Braking - Brake pipe accelerator valve |
|
|
|
CEN |
EN 15625:2008 Railway applications - Braking - Automatic variable load sensing devices |
|
|
|
Cenelec |
EN 50119:2001 Railway applications - Fixed installations - Electric traction overhead contact lines |
|
|
|
Cenelec |
EN 50122-1:1997 Railway applications - Fixed installations - Part 1: Protective provisions relating to electrical safety and earthing |
|
|
|
Cenelec |
EN 50124-1:2001 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
|
|
|
|
EN 50124-1:2001/A1:2003 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 50124-1:2001/A2:2005 |
Note 3 |
Date expired (1.5.2008) |
|
Cenelec |
EN 50124-2:2001 Railway applications - Insulation coordination - Part 2: Overvoltages and related protection |
|
|
|
Cenelec |
EN 50125-1:1999 Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock |
|
|
|
Cenelec |
EN 50125-3:2003 Railway applications - Environmental conditions for equipment - Part 3: Equipment for signalling and telecommunications |
|
|
|
Cenelec |
EN 50126-1:1999 Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Basic requirements and generic process |
|
|
|
Cenelec |
EN 50128:2001 Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
|
|
|
Cenelec |
EN 50129:2003 Railway applications - Communication, signalling and processing systems - Safety related electronic systems for signalling |
|
|
|
Cenelec |
EN 50149:2001 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires |
|
|
|
Cenelec |
EN 50155:2001 Railway applications - Electronic equipment used on rolling stock |
|
|
|
|
EN 50155:2001/A1:2002 |
Note 3 |
Date expired (1.9.2005) |
|
Cenelec |
EN 50155:2007 Railway applications - Electronic equipment used on rolling stock |
EN 50155:2001 and its amendment Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 50159-1:2001 Railway applications - Communication, signalling and processing systems - Part 1: Safety-related communication in closed transmission systems |
|
|
|
Cenelec |
EN 50159-2:2001 Railway applications - Communication, signalling and processing systems - Part 2: Safety related communication in open transmission systems |
|
|
|
Cenelec |
EN 50163:2004 Railway applications - Supply voltages of traction systems |
|
|
|
|
EN 50163:2004/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
Cenelec |
EN 50206-1:1998 Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1: Pantographs for main line vehicles |
|
|
|
Cenelec |
EN 50238:2003 Railway applications - Compatibility between rolling stock and train detection systems |
|
|
|
Cenelec |
EN 50317:2002 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line |
|
|
|
|
EN 50317:2002/A1:2004 |
Note 3 |
Date expired (1.10.2007) |
|
|
EN 50317:2002/A2:2007 |
Note 3 |
Date expired (1.2.2010) |
|
Cenelec |
EN 50367:2006 Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) |
|
|
|
Cenelec |
EN 50388:2005 Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and Council (2) amended by the Directive 98/48/EC (3). |
|
— |
Harmonised standards are adopted by the European Standardisation Organisations in English (CEN and CENELEC also publish in French and German). Subsequently, the titles of the harmonised standards are translated into all other required official languages of the European Union by the National Standards Bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list. |
|
— |
More information about harmonised standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European Standards Organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Brussels, BELGIUM, Tel. +32 2 5500811; fax +32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, 1000 Brussels, BELGIUM, Tel. +32 2 5196871; fax +32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, FRANCE, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 204, 21.7.1998, p. 37.
(3) OJ L 217, 5.8.1998, p. 18.
|
16.4.2010 |
EN |
Official Journal of the European Union |
C 97/18 |
Commission communication in the framework of the implementation of the Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system
(Text with EEA relevance)
(Publication of titles and references of harmonised standards under the directive)
2010/C 97/03
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
CEN |
EN 12080:2007 Railway applications - Axleboxes - Rolling bearings |
|
|
|
CEN |
EN 12081:2007 Railway applications - Axleboxes - Lubricating greases |
|
|
|
CEN |
EN 12082:2007 Railway applications - Axleboxes - Performance testing |
|
|
|
CEN |
EN 13103:2009 Railway applications - Wheelsets and bogies - Non-powered axles - Design method |
|
|
|
CEN |
EN 13104:2009 Railway applications - Wheelsets and bogies - Powered axles - Design method |
|
|
|
CEN |
EN 13260:2009 Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
|
|
|
CEN |
EN 13261:2009 Railway applications - Wheelsets and bogies - Axles - Product requirements |
|
|
|
CEN |
EN 13262:2004+A1:2008 Railway applications - Wheelsets and bogies - Wheels - Product requirements |
|
|
|
CEN |
EN 13715:2006 Railway applications - Wheelsets and bogies - Wheels - Wheels tread |
|
|
|
CEN |
EN 13848-1:2003+A1:2008 Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry |
|
|
|
CEN |
EN 14531-1:2005 Railway applications - Methods for calculation of stopping distances, slowing distances and immobilization braking - Part 1: General algorithms |
|
|
|
CEN |
EN 14535-1:2005 Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
|
|
|
CEN |
EN 14601:2005 Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
|
|
|
CEN |
EN 14865-1:2009 Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
|
|
|
CEN |
EN 14865-2:2006+A1:2009 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
|
|
|
CEN |
EN 15220-1:2008 Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators |
|
|
|
CEN |
EN 15355:2008 Railway applications - Braking - Distributor valves and distributor-isolating devices |
|
|
|
CEN |
EN 15461:2008 Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements |
|
|
|
CEN |
EN 15528:2008 Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
|
|
|
CEN |
EN 15551:2009 Railway applications - Railway rolling stock - Buffers |
|
|
|
CEN |
EN 15566:2009 Railway applications - Railway rolling stock - Draw gear and screw coupling |
|
|
|
CEN |
EN 15595:2009 Railway applications - Braking - Wheel slide protection |
|
|
|
CEN |
EN 15611:2008 Railway applications - Braking - Relay valves |
|
|
|
CEN |
EN 15612:2008 Railway applications - Braking - Brake pipe accelerator valve |
|
|
|
CEN |
EN 15624:2008 Railway applications - Braking - Empty-loaded changeover devices |
|
|
|
CEN |
EN 15625:2008 Railway applications - Braking - Automatic variable load sensing devices |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and Council (2) amended by the Directive 98/48/EC (3). |
|
— |
Harmonised standards are adopted by the European Standardisation Organisations in English (CEN and CENELEC also publish in French and German). Subsequently, the titles of the harmonised standards are translated into all other required official languages of the European Union by the National Standards Bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list. |
|
— |
More information about harmonised standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European Standards Organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Brussels, BELGIUM, Tel. +32 2 5500811; fax +32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, 1000 Brussels, BELGIUM, Tel. +32 2 5196871; fax +32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, FRANCE, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 204, 21.7.1998, p. 37.
(3) OJ L 217, 5.8.1998, p. 18.