13.11.2015   

EN

Official Journal of the European Union

C 378/6


Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2015/C 378/03)

The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards.

ESO (1)

Reference and title of the standard

(and reference document)

Reference of superseded standard

Date of applicability of the standard as a harmonised standard

Date of the end of the co-existence period

(1)

(2)

(3)

(4)

(5)

CEN

EN 1:1998

Flued oil stoves with vaporizing burners

 

1.1.2008

1.1.2009

 

EN 1:1998/A1:2007

 

1.1.2008

1.1.2009

CEN

EN 40-4:2005

Lighting columns — Part 4: Requirements for reinforced and prestressed concrete lighting columns

 

1.10.2006

1.10.2007

 

EN 40-4:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 40-5:2002

Lighting columns — Part 5: Requirements for steel lighting columns

 

1.2.2003

1.2.2005

CEN

EN 40-6:2002

Lighting columns — Part 6: Requirements for aluminium lighting columns

 

1.2.2003

1.2.2005

CEN

EN 40-7:2002

Lighting columns — Part 7: Requirements for fibre reinforced polymer composite lighting columns

 

1.10.2003

1.10.2004

CEN

EN 54-2:1997

Fire detection and fire alarm systems — Part 2: Control and indicating equipment

 

1.1.2008

1.8.2009

 

EN 54-2:1997/AC:1999

 

1.1.2008

1.1.2008

 

EN 54-2:1997/A1:2006

 

1.1.2008

1.8.2009

CEN

EN 54-3:2001

Fire detection and fire alarm systems — Part 3: Fire alarm devices — Sounders

 

1.4.2003

1.6.2009

 

EN 54-3:2001/A1:2002

 

1.4.2003

30.6.2005

 

EN 54-3:2001/A2:2006

 

1.3.2007

1.6.2009

CEN

EN 54-4:1997

Fire detection and fire alarm systems — Part 4: Power supply equipment

 

1.10.2003

1.8.2009

 

EN 54-4:1997/AC:1999

 

1.6.2005

1.6.2005

 

EN 54-4:1997/A1:2002

 

1.10.2003

1.8.2009

 

EN 54-4:1997/A2:2006

 

1.6.2007

1.8.2009

CEN

EN 54-5:2000

Fire detection and fire alarm systems — Part 5: Heat detectors — Point detectors

 

1.4.2003

30.6.2005

 

EN 54-5:2000/A1:2002

 

1.4.2003

30.6.2005

CEN

EN 54-7:2000

Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization

 

1.4.2003

1.8.2009

 

EN 54-7:2000/A1:2002

 

1.4.2003

30.6.2005

 

EN 54-7:2000/A2:2006

 

1.5.2007

1.8.2009

CEN

EN 54-10:2002

Fire detection and fire alarm systems — Part 10: Flame detectors — Point detectors

 

1.9.2006

1.9.2008

 

EN 54-10:2002/A1:2005

 

1.9.2006

1.9.2008

CEN

EN 54-11:2001

Fire detection and fire alarm systems — Part 11: Manual call points

 

1.9.2006

1.9.2008

 

EN 54-11:2001/A1:2005

 

1.9.2006

1.9.2008

CEN

EN 54-12:2002

Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical light beam

 

1.10.2003

31.12.2005

CEN

EN 54-16:2008

Fire detection and fire alarm systems — Part 16: Voice alarm control and indicating equipment

 

1.1.2009

1.4.2011

CEN

EN 54-17:2005

Fire detection and fire alarm systems — Part 17: Short-circuit isolators

 

1.10.2006

1.12.2008

 

EN 54-17:2005/AC:2007

 

1.1.2009

1.1.2009

CEN

EN 54-18:2005

Fire detection and fire alarm systems — Part 18: Input/output devices

 

1.10.2006

1.12.2008

 

EN 54-18:2005/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 54-20:2006

Fire detection and fire alarm systems — Part 20: Aspirating smoke detectors

 

1.4.2007

1.7.2009

 

EN 54-20:2006/AC:2008

 

1.8.2009

1.8.2009

CEN

EN 54-21:2006

Fire detection and fire alarm systems — Part 21: Alarm transmission and fault warning routing equipment

 

1.3.2007

1.6.2009

CEN

EN 54-23:2010

Fire detection and fire alarm systems — Part 23: Fire alarm devices — Visual alarm devices

 

1.12.2010

31.12.2013

CEN

EN 54-24:2008

Fire detection and fire alarm systems — Part 24: Components of voice alarm systems — Loudspeakers

 

1.1.2009

1.4.2011

CEN

EN 54-25:2008

Fire detection and fire alarm systems — Part 25: Components using radio links

 

1.1.2009

1.4.2011

 

EN 54-25:2008/AC:2012

 

1.7.2012

1.7.2012

CEN

EN 179:2008

Building hardware — Emergency exit devices operated by a lever handle or push pad, for use on escape routes — Requirements and test methods

EN 179:1997

1.1.2009

1.1.2010

CEN

EN 197-1:2011

Cement — Part 1: Composition, specifications and conformity criteria for common cements

EN 197-1:2000

EN 197-4:2004

1.7.2012

1.7.2013

CEN

EN 295-1:2013

Vitrified clay pipe systems for drains and sewers — Part 1: Requirements for pipes, fittings and joints

EN 295-10:2005

1.11.2013

1.11.2014

CEN

EN 295-4:2013

Vitrified clay pipe systems for drains and sewers — Part 4: Requirements for adaptors, connectors and flexible couplings

EN 295-10:2005

1.11.2013

1.11.2014

CEN

EN 295-5:2013

Vitrified clay pipe systems for drains and sewers — Part 5: Requirements for perforated pipes and fittings

EN 295-10:2005

1.11.2013

1.11.2014

CEN

EN 295-6:2013

Vitrified clay pipes systems for drain and sewers — Part 6: Requirements for components of manholes and inspection chambers

EN 295-10:2005

1.11.2013

1.11.2014

CEN

EN 295-7:2013

Vitrified clay pipe systems for drains and sewers — Part 7: Requirements for pipes and joints for pipe jacking

EN 295-10:2005

1.11.2013

1.11.2014

CEN

EN 331:1998

Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings

 

1.9.2011

1.9.2012

 

EN 331:1998/A1:2010

 

1.9.2011

1.9.2012

CEN

EN 413-1:2011

Masonry cement — Part 1: Composition, specifications and conformity criteria

EN 413-1:2004

1.2.2012

1.2.2013

CEN

EN 416-1:2009

Single burner gas-fired overhead radiant tube heaters for non-domestic use — Part 1: Safety

 

1.12.2009

1.12.2010

CEN

EN 438-7:2005

High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes

 

1.11.2005

1.11.2006

CEN

EN 442-1:2014

Radiators and convectors — Part 1: Technical specifications and requirements

EN 442-1:1995

13.11.2015

13.11.2016

CEN

EN 450-1:2012

Fly ash for concrete — Part 1: Definition, specifications and conformity criteria

EN 450-1:2005+A1:2007

1.5.2013

1.5.2014

CEN

EN 459-1:2010

Building lime — Part 1: Definitions, specifications and conformity criteria

EN 459-1:2001

1.6.2011

1.6.2012

CEN

EN 490:2011

Concrete roofing tiles and fittings for roof covering and wall cladding — Product specifications

EN 490:2004

1.8.2012

1.8.2012

CEN

EN 492:2012

Fibre-cement slates and fittings — Product specification and test methods

EN 492:2004

1.7.2013

1.7.2013

CEN

EN 494:2012

Fibre-cement profiled sheets and fittings — Product specification and test methods

EN 494:2004+A3:2007

1.8.2013

1.8.2013

CEN

EN 516:2006

Prefabricated accessories for roofing — Installations for roof access — Walkways, treads and steps

 

1.11.2006

1.11.2007

CEN

EN 517:2006

Prefabricated accessories for roofing — Roof safety hooks

 

1.12.2006

1.12.2007

CEN

EN 520:2004+A1:2009

Gypsum plasterboards — Definitions, requirements and test methods

EN 520:2004

1.6.2010

1.12.2010

CEN

EN 523:2003

Steel strip sheaths for prestressing tendons — Terminology, requirements, quality control

 

1.6.2004

1.6.2005

CEN

EN 534:2006+A1:2010

Corrugated bitumen sheets — Product specification and test methods

EN 534:2006

1.1.2011

1.1.2011

CEN

EN 544:2011

Bitumen shingles with mineral and/or synthetic reinforcements — Product specification and test methods

EN 544:2005

1.4.2012

1.4.2012

CEN

EN 572-9:2004

Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 588-2:2001

Fibre cement pipes for drains and sewers — Part 2: Manholes and inspection chambers

 

1.10.2002

1.10.2003

CEN

EN 598:2007+A1:2009

Ductile iron pipes, fittings, accessories and their joints for sewerage applications — Requirements and test methods

EN 598:2007

1.4.2010

1.4.2011

CEN

EN 621:2009

Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products

 

1.8.2010

1.8.2011

CEN

EN 671-1:2012

Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose

EN 671-1:2001

1.3.2013

1.7.2013

CEN

EN 671-2:2012

Fixed firefighting systems — Hose systems — Part 2: Hose systems with lay-flat hose

EN 671-2:2001

1.3.2013

1.7.2013

CEN

EN 681-1:1996

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber

 

1.1.2003

1.1.2009

 

EN 681-1:1996/A3:2005

 

1.1.2008

1.1.2009

 

EN 681-1:1996/A1:1998

 

1.1.2003

1.1.2004

 

EN 681-1:1996/A2:2002

 

1.1.2003

1.1.2004

CEN

EN 681-2:2000

Elastomeric Seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers

 

1.1.2003

1.1.2004

 

EN 681-2:2000/A1:2002

 

1.1.2003

1.1.2004

 

EN 681-2:2000/A2:2005

 

1.1.2010

1.1.2010

CEN

EN 681-3:2000

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 3: Cellular materials of vulcanized rubber

 

1.1.2003

1.1.2004

 

EN 681-3:2000/A1:2002

 

1.1.2003

1.1.2004

 

EN 681-3:2000/A2:2005

 

1.7.2012

1.7.2012

CEN

EN 681-4:2000

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 4: Cast polyurethane sealing elements

 

1.1.2003

1.1.2004

 

EN 681-4:2000/A1:2002

 

1.1.2003

1.1.2004

 

EN 681-4:2000/A2:2005

 

1.7.2012

1.7.2012

CEN

EN 682:2002

Elastomeric Seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids

 

1.10.2002

1.12.2003

 

EN 682:2002/A1:2005

 

1.7.2012

1.7.2012

CEN

EN 771-1:2011

Specification for masonry units — Part 1: Clay masonry units

EN 771-1:2003

1.2.2012

1.2.2013

CEN

EN 771-2:2011

Specification for masonry units — Part 2: Calcium silicate masonry units

EN 771-2:2003

1.2.2012

1.2.2013

CEN

EN 771-3:2011

Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)

EN 771-3:2003

1.2.2012

1.2.2013

CEN

EN 771-4:2011

Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units

EN 771-4:2003

1.2.2012

1.2.2013

CEN

EN 771-5:2011

Specification for masonry units — Part 5: Manufactured stone masonry units

EN 771-5:2003

1.2.2012

1.2.2013

CEN

EN 771-6:2011

Specification for masonry units — Part 6: Natural stone masonry units

EN 771-6:2005

1.2.2012

1.2.2013

CEN

EN 777-1:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 1: System D — Safety

 

1.11.2009

1.11.2010

CEN

EN 777-2:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 2: System E — Safety

 

1.11.2009

1.11.2010

CEN

EN 777-3:2009

Multi-burner gas-fired overhead radiant tube heater systems for non domestic use — Part 3: System F — Safety

 

1.11.2009

1.11.2010

CEN

EN 777-4:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 4: System H — Safety

 

1.11.2009

1.11.2010

CEN

EN 778:2009

Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products

 

1.8.2010

1.8.2011

CEN

EN 845-1:2013

Specification for ancillary components for masonry — Part 1: Wall ties, tension straps, hangers and brackets

EN 845-1:2003+A1:2008

8.8.2014

8.8.2015

CEN

EN 845-2:2013

Specification for ancillary components for masonry — Part 2: Lintels

EN 845-2:2003

8.8.2014

8.8.2015

CEN

EN 845-3:2013

Specification for ancillary components for masonry — Part 3: Bed joint reinforcement of steel meshwork

EN 845-3:2003+A1:2008

8.8.2014

8.8.2015

CEN

EN 858-1:2002

Separator systems for light liquids (e.g. oil and petrol) — Part 1: Principles of product design, performance and testing, marking and quality control

 

1.9.2005

1.9.2006

 

EN 858-1:2002/A1:2004

 

1.9.2005

1.9.2006

CEN

EN 877:1999

Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings — Requirements, test methods and quality assurance

 

1.1.2008

1.9.2009

 

EN 877:1999/A1:2006/AC:2008

 

1.1.2009

1.1.2009

 

EN 877:1999/A1:2006

 

1.1.2008

1.9.2009

CEN

EN 934-2:2009+A1:2012

Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and labelling

EN 934-2:2009

1.3.2013

1.9.2013

CEN

EN 934-3:2009+A1:2012

Admixtures for concrete, mortar and grout — Part 3: Admixtures for masonry mortar — Definitions, requirements, conformity and marking and labelling

EN 934-3:2009

1.3.2013

1.9.2013

CEN

EN 934-4:2009

Admixtures for concrete, mortar and grout — Part 4: Admixtures for grout for prestressing tendons — Definitions, requirements, conformity, marking and labelling

EN 934-4:2001

1.3.2010

1.3.2011

CEN

EN 934-5:2007

Admixtures for concrete, mortar and grout — Part 5: Admixtures for sprayed concrete — Definitions, requirements, conformity, marking and labelling

 

1.1.2009

1.1.2010

CEN

EN 969:2009

Ductile iron pipes, fittings, accessories and their joints for gas pipelines — Requirements and test methods

 

1.1.2010

1.1.2011

CEN

EN 997:2012

WC pans and WC suites with integral trap

EN 997:2003

1.12.2012

1.6.2013

 

EN 997:2012/AC:2012

 

1.3.2013

1.3.2013

CEN

EN 998-1:2010

Specification for mortar for masonry — Part 1: Rendering and plastering mortar

EN 998-1:2003

1.6.2011

1.6.2012

CEN

EN 998-2:2010

Specification for mortar for masonry — Part 2: Masonry mortar

EN 998-2:2003

1.6.2011

1.6.2012

CEN

EN 1013:2012+A1:2014

Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings — Requirements and test methods

EN 1013:2012

10.7.2015

10.7.2016

CEN

EN 1020:2009

Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products

 

1.8.2010

1.8.2011

CEN

EN 1036-2:2008

Glass in building — Mirrors from silver-coated float glass for internal use — Part 2: Evaluation of conformity; product standard

 

1.1.2009

1.1.2010

CEN

EN 1051-2:2007

Glass in building — Glass blocks and glass pavers — Part 2: Evaluation of conformity/Product standard

 

1.1.2009

1.1.2010

CEN

EN 1057:2006+A1:2010

Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heating applications

EN 1057:2006

1.12.2010

1.12.2010

CEN

EN 1090-1:2009+A1:2011

Execution of steel structures and aluminium structures — Part 1: Requirements for conformity assessment of structural components

EN 1090-1:2009

1.9.2012

1.7.2014

CEN

EN 1096-4:2004

Glass in building — Coated glass — Part 4: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 1123-1:1999

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control

 

1.6.2005

1.6.2006

 

EN 1123-1:1999/A1:2004

 

1.6.2005

1.6.2006

CEN

EN 1124-1:1999

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control

 

1.6.2005

1.6.2006

 

EN 1124-1:1999/A1:2004

 

1.6.2005

1.6.2006

CEN

EN 1125:2008

Building hardware — Panic exit devices operated by a horizontal bar, for use on escape routes — Requirements and test methods

EN 1125:1997

1.1.2009

1.1.2010

CEN

EN 1154:1996

Building hardware — Controlled door closing devices — Requirements and test methods

 

1.10.2003

1.10.2004

 

EN 1154:1996/A1:2002/AC:2006

 

1.1.2010

1.1.2010

 

EN 1154:1996/A1:2002

 

1.10.2003

1.10.2004

CEN

EN 1155:1997

Building hardware — Electrically powered hold-open devices for swing doors — Requirements and test methods

 

1.10.2003

1.10.2004

 

EN 1155:1997/A1:2002/AC:2006

 

1.1.2010

1.1.2010

 

EN 1155:1997/A1:2002

 

1.10.2003

1.10.2004

CEN

EN 1158:1997

Building hardware — Door coordinator devices — Requirements and test methods

 

1.10.2003

1.10.2004

 

EN 1158:1997/A1:2002/AC:2006

 

1.6.2006

1.6.2006

 

EN 1158:1997/A1:2002

 

1.10.2003

1.10.2004

CEN

EN 1168:2005+A3:2011

Precast concrete products — Hollow core slabs

EN 1168:2005+A2:2009

1.7.2012

1.7.2013

CEN

EN 1279-5:2005+A2:2010

Glass in building — Insulating glass units — Part 5: Evaluation of conformity

EN 1279-5:2005+A1:2008

1.2.2011

1.2.2012

CEN

EN 1304:2005

Clay roofing tiles and fittings — Product definitions and specifications

 

1.2.2006

1.2.2007

CEN

EN 1317-5:2007+A2:2012

Road restraint systems — Part 5: Product requirements and evaluation of conformity for vehicle restraint systems

EN 1317-5:2007+A1:2008

1.1.2013

1.1.2013

 

EN 1317-5:2007+A2:2012/AC:2012

 

1.3.2013

1.3.2013

CEN

EN 1319:2009

Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW

 

1.10.2010

1.10.2011

CEN

EN 1337-3:2005

Structural bearings — Part 3: Elastomeric bearings

 

1.1.2006

1.1.2007

CEN

EN 1337-4:2004

Structural bearings — Part 4: Roller bearings

 

1.2.2005

1.2.2006

 

EN 1337-4:2004/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 1337-5:2005

Structural bearings — Part 5: Pot bearings

 

1.1.2006

1.1.2007

CEN

EN 1337-6:2004

Structural bearings — Part 6: Rocker bearings

 

1.2.2005

1.2.2006

CEN

EN 1337-7:2004

Structural bearings — Part 7: Spherical and cylindrical PTFE bearings

EN 1337-7:2000

1.12.2004

1.6.2005

CEN

EN 1337-8:2007

Structural bearings — Part 8: Guide Bearings and Restraint Bearings

 

1.1.2009

1.1.2010

CEN

EN 1338:2003

Concrete paving blocks — Requirements and test methods

 

1.3.2004

1.3.2005

 

EN 1338:2003/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1339:2003

Concrete paving flags — Requirements and test methods

 

1.3.2004

1.3.2005

 

EN 1339:2003/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1340:2003

Concrete kerb units — Requirements and test methods

 

1.2.2004

1.2.2005

 

EN 1340:2003/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1341:2012

Slabs of natural stone for external paving — Requirements and test methods

EN 1341:2001

1.9.2013

1.9.2013

CEN

EN 1342:2012

Setts of natural stone for external paving — Requirements and test methods

EN 1342:2001

1.9.2013

1.9.2013

CEN

EN 1343:2012

Kerbs of natural stone for external paving — Requirements and test methods

EN 1343:2001

1.9.2013

1.9.2013

CEN

EN 1344:2013

Clay pavers — Requirements and test methods

EN 1344:2002

8.8.2014

8.8.2016

 

EN 1344:2013/AC:2015

 

 

 

CEN

EN 1423:2012

Road marking materials — Drop on materials — Glass beads, antiskid aggregates and mixtures of the two

EN 1423:1997

1.11.2012

1.11.2012

 

EN 1423:2012/AC:2013

 

1.7.2013

1.7.2013

CEN

EN 1433:2002

Drainage channels for vehicular and pedestrian areas — Classification, design and testing requirements, marking and evaluation of conformity

 

1.8.2003

1.8.2004

 

EN 1433:2002/A1:2005

 

1.1.2006

1.1.2006

CEN

EN 1457-1:2012

Chimneys — Clay/ceramic flue liners — Part 1: Flue liners operating under dry conditions — Requirements and test methods

EN 1457:1999

1.11.2012

1.11.2013

CEN

EN 1457-2:2012

Chimneys — Clay/ceramic flue liners — Part 2: Flue liners operating under wet conditions — Requirements and test methods

EN 1457:1999

1.11.2012

1.11.2013

CEN

EN 1463-1:2009

Road marking materials — Retroreflecting road studs — Part 1: Initial performance requirements

EN 1463-1:1997

1.1.2010

1.1.2011

CEN

EN 1469:2004

Natural stone products — Slabs for cladding — Requirements

 

1.7.2005

1.7.2006

CEN

EN 1504-2:2004

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 2: Surface protection systems for concrete

 

1.9.2005

1.1.2009

CEN

EN 1504-3:2005

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 3: Structural and non-structural repair

 

1.10.2006

1.1.2009

CEN

EN 1504-4:2004

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 4: Structural bonding

 

1.9.2005

1.1.2009

CEN

EN 1504-5:2004

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 5: Concrete injection

 

1.10.2005

1.1.2009

CEN

EN 1504-6:2006

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 6: Anchoring of reinforcing steel bar

 

1.6.2007

1.1.2009

CEN

EN 1504-7:2006

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 7: Reinforcement corrosion protection

 

1.6.2007

1.1.2009

CEN

EN 1520:2011

Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement

EN 1520:2002

1.1.2012

1.1.2013

CEN

EN 1748-1-2:2004

Glass in building — Special basic products — Borosilicate glasses — Part 1-2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 1748-2-2:2004

Glass in building — Special basic products — Glass ceramics — Part 2-2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 1806:2006

Chimneys — Clay/ceramic flue blocks for single wall chimneys — Requirements and test methods

 

1.5.2007

1.5.2008

CEN

EN 1825-1:2004

Grease separators — Part 1: Principles of design, performance and testing, marking and quality control

 

1.9.2005

1.9.2006

 

EN 1825-1:2004/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1856-1:2009

Chimneys — Requirements for metal chimneys — Part 1: System chimney products

EN 1856-1:2003

1.3.2010

1.3.2011

CEN

EN 1856-2:2009

Chimneys — Requirements for metal chimneys — Part 2: Metal flue liners and connecting flue pipes

EN 1856-2:2004

1.3.2010

1.3.2011

CEN

EN 1857:2010

Chimneys — Components — Concrete flue liners

EN 1857:2003+A1:2008

1.1.2011

1.1.2012

CEN

EN 1858:2008+A1:2011

Chimneys — Components — Concrete flue blocks

EN 1858:2008

1.4.2012

1.4.2013

CEN

EN 1863-2:2004

Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 1873:2005

Prefabricated accessories for roofing — Individual roof lights of plastics — Product specification and test methods

 

1.10.2006

1.10.2009

CEN

EN 1916:2002

Concrete pipes and fittings, unreinforced, steel fibre and reinforced

 

1.8.2003

23.11.2004

 

EN 1916:2002/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 1917:2002

Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

 

1.8.2003

23.11.2004

 

EN 1917:2002/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 1935:2002

Building hardware — Single-axis hinges — Requirements and test methods

 

1.10.2002

1.12.2003

 

EN 1935:2002/AC:2003

 

1.1.2007

1.1.2007

CEN

EN 10025-1:2004

Hot rolled products of structural steels — Part 1: General technical delivery conditions

 

1.9.2005

1.9.2006

CEN

EN 10088-4:2009

Stainless steels — Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

 

1.2.2010

1.2.2011

CEN

EN 10088-5:2009

Stainless steels — Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes

 

1.1.2010

1.1.2011

CEN

EN 10210-1:2006

Hot finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions

 

1.2.2007

1.2.2008

CEN

EN 10219-1:2006

Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions

 

1.2.2007

1.2.2008

CEN

EN 10224:2002

Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions

 

1.4.2006

1.4.2007

 

EN 10224:2002/A1:2005

 

1.4.2006

1.4.2007

CEN

EN 10255:2004+A1:2007

Non-Alloy steel tubes suitable for welding and threading — Technical delivery conditions

 

1.1.2010

1.1.2011

CEN

EN 10311:2005

Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids

 

1.3.2006

1.3.2007

CEN

EN 10312:2002

Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions

 

1.4.2006

1.4.2007

 

EN 10312:2002/A1:2005

 

1.4.2006

1.4.2007

CEN

EN 10340:2007

Steel castings for structural uses

 

1.1.2010

1.1.2011

 

EN 10340:2007/AC:2008

 

1.1.2010

1.1.2010

CEN

EN 10343:2009

Steels for quenching and tempering for construction purposes — Technical delivery conditions

 

1.1.2010

1.1.2011

CEN

EN 12004:2007+A1:2012

Adhesives for tiles — Requirements, evaluation of conformity, classification and designation

EN 12004:2007

1.4.2013

1.7.2013

CEN

EN 12050-1:2001

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 1: Lifting plants for wastewater containing faecal matter

 

1.11.2001

1.11.2002

CEN

EN 12050-2:2000

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 2: Lifting plants for faecal-free wastewater

 

1.10.2001

1.10.2002

CEN

EN 12050-3:2000

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 3: Lifting plants for wastewater containing faecal matter for limited applications

 

1.10.2001

1.10.2002

CEN

EN 12050-4:2000

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter

 

1.10.2001

1.10.2002

CEN

EN 12057:2004

Natural stone products — Modular tiles — Requirements

 

1.9.2005

1.9.2006

CEN

EN 12058:2004

Natural stone products — Slabs for floors and stairs — Requirements

 

1.9.2005

1.9.2006

CEN

EN 12094-1:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 1: Requirements and test methods for electrical automatic control and delay devices

 

1.2.2004

1.5.2006

CEN

EN 12094-2:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 2: Requirements and test methods for non-electrical automatic control and delay devices

 

1.2.2004

1.5.2006

CEN

EN 12094-3:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 3: Requirements and test methods for manual triggering and stop devices

 

1.1.2004

1.9.2005

CEN

EN 12094-4:2004

Fixed firefighting systems — Components for gas extinguishing systems — Part 4: Requirements and test methods for container valve assemblies and their actuators

 

1.5.2005

1.8.2007

CEN

EN 12094-5:2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 5: Requirements and test methods for high and low pressure selector valves and their actuators

EN 12094-5:2000

1.2.2007

1.5.2009

CEN

EN 12094-6:2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 6: Requirements and test methods for non-electrical disable devices

EN 12094-6:2000

1.2.2007

1.5.2009

CEN

EN 12094-7:2000

Fixed firefighting systems — Components for gas extinguishing systems — Part 7: Requirements and test methods for nozzles for CO2 systems

 

1.10.2001

1.4.2004

 

EN 12094-7:2000/A1:2005

 

1.11.2005

1.11.2006

CEN

EN 12094-8:2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 8: Requirements and test methods for connectors

 

1.2.2007

1.5.2009

CEN

EN 12094-9:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 9: Requirements and test methods for special fire detectors

 

1.1.2004

1.9.2005

CEN

EN 12094-10:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 10: Requirements and test methods for pressure gauges and pressure switches

 

1.2.2004

1.5.2006

CEN

EN 12094-11:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 11: Requirements and test methods for mechanical weighing devices

 

1.1.2004

1.9.2005

CEN

EN 12094-12:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 12: Requirements and test methods for pneumatic alarm devices

 

1.1.2004

1.9.2005

CEN

EN 12094-13:2001

Fixed firefighting systems — Components for gas extinguishing systems — Part 13: Requirements and test methods for check valves and non-return valves

 

1.1.2002

1.4.2004

 

EN 12094-13:2001/AC:2002

 

1.1.2010

1.1.2010

CEN

EN 12101-1:2005

Smoke and heat control systems — Part 1: Specification for smoke barriers

 

1.6.2006

1.9.2008

 

EN 12101-1:2005/A1:2006

 

1.12.2006

1.9.2008

CEN

EN 12101-2:2003

Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators

 

1.4.2004

1.9.2006

CEN

EN 12101-3:2002

Smoke and heat control systems — Part 3: Specification for powered smoke and heat exhaust ventilators

 

1.4.2004

1.4.2005

 

EN 12101-3:2002/AC:2005

 

1.1.2006

1.1.2006

CEN

EN 12101-6:2005

Smoke and heat control systems — Part 6: Specification for pressure differential systems — Kits

 

1.4.2006

1.4.2007

 

EN 12101-6:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 12101-7:2011

Smoke and heat control systems — Part 7: Smoke duct sections

 

1.2.2012

1.2.2013

CEN

EN 12101-8:2011

Smoke and heat control systems — Part 8: Smoke control dampers

 

1.2.2012

1.2.2013

CEN

EN 12101-10:2005

Smoke and heat control systems — Part 10: Power supplies

 

1.10.2006

1.5.2012

 

EN 12101-10:2005/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 12150-2:2004

Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 12209:2003

Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods

 

1.12.2004

1.6.2006

 

EN 12209:2003/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 12259-1:1999 + A1:2001

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers

 

1.4.2002

1.9.2005

 

EN 12259-1:1999 + A1:2001/A3:2006

 

1.11.2006

1.11.2007

 

EN 12259-1:1999 + A1:2001/A2:2004

 

1.3.2005

1.3.2006

CEN

EN 12259-2:1999

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 2: Wet alarm valve assemblies

 

1.1.2002

1.8.2007

 

EN 12259-2:1999/AC:2002

 

1.6.2005

1.6.2005

 

EN 12259-2:1999/A1:2001

 

1.1.2002

1.8.2007

 

EN 12259-2:1999/A2:2005

 

1.9.2006

1.8.2007

CEN

EN 12259-3:2000

Fixed firefighting systems — Components for automatic sprinkler and water spray systems — Part 3: Dry alarm valve assemblies

 

1.1.2002

1.8.2007

 

EN 12259-3:2000/A1:2001

 

1.1.2002

1.8.2007

 

EN 12259-3:2000/A2:2005

 

1.9.2006

1.8.2007

CEN

EN 12259-4:2000

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 4: Water motor alarms

 

1.1.2002

1.4.2004

 

EN 12259-4:2000/A1:2001

 

1.1.2002

1.4.2004

CEN

EN 12259-5:2002

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 5: Water flow detectors

 

1.7.2003

1.9.2005

CEN

EN 12271:2006

Surface dressing — Requirements

 

1.1.2008

1.1.2011

CEN

EN 12273:2008

Slurry surfacing — Requirements

 

1.1.2009

1.1.2011

CEN

EN 12285-2:2005

Workshop fabricated steel tanks — Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids

 

1.1.2006

1.1.2008

CEN

EN 12326-1:2014

Slate and stone for discontinuous roofing and external cladding — Part 1: Specifications for slate and carbonate slate

EN 12326-1:2004

13.2.2015

13.2.2016

CEN

EN 12337-2:2004

Glass in building — Chemically strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 12352:2006

Traffic control equipment — Warning and safety light devices

 

1.2.2007

1.2.2008

CEN

EN 12368:2006

Traffic control equipment — Signal heads

 

1.2.2007

1.2.2008

CEN

EN 12380:2002

Air admittance valves for drainage systems — Requirements, tests methods and evaluation of conformity

 

1.10.2003

1.10.2004

CEN

EN 12446:2011

Chimneys — Components — Concrete outer wall elements

EN 12446:2003

1.4.2012

1.4.2013

CEN

EN 12467:2012

Fibre-cement flat sheets — Product specification and test methods

EN 12467:2004

1.7.2013

1.7.2013

CEN

EN 12566-1:2000

Small wastewater treatment systems for up to 50 PT — Part 1: Prefabricated septic tanks

 

1.12.2004

1.12.2005

 

EN 12566-1:2000/A1:2003

 

1.12.2004

1.12.2005

CEN

EN 12566-3:2005+A2:2013

Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants

EN 12566-3:2005+A1:2009

8.8.2014

8.8.2015

CEN

EN 12566-4:2007

Small wastewater treatment systems for up to 50 PT — Part 4: Septic tanks assembled in situ from prefabricated kits

 

1.1.2009

1.1.2010

CEN

EN 12566-6:2013

Small wastewater treatment systems for up to 50 PT — Part 6: Prefabricated treatment units for septic tank effluent

 

1.11.2013

1.11.2014

CEN

EN 12566-7:2013

Small wastewater treatment systems for up to 50 PT — Part 7: Prefabricated tertiary treatment units

 

8.8.2014

8.8.2015

CEN

EN 12591:2009

Bitumen and bituminous binders — Specifications for paving grade bitumens

 

1.1.2010

1.1.2011

CEN

EN 12602:2008+A1:2013

Prefabricated reinforced components of autoclaved aerated concrete

 

8.8.2014

8.8.2015

CEN

EN 12620:2002+A1:2008

Aggregates for concrete

EN 12620:2002

1.1.2009

1.1.2010

CEN

EN 12676-1:2000

Anti-glare systems for roads — Part 1: Performance and characteristics

 

1.2.2004

1.2.2006

 

EN 12676-1:2000/A1:2003

 

1.2.2004

1.2.2006

CEN

EN 12737:2004+A1:2007

Precast concrete products — Floor slats for livestock

 

1.1.2009

1.1.2010

CEN

EN 12764:2004+A1:2008

Sanitary appliances — Specification for whirlpool baths

EN 12764:2004

1.1.2009

1.1.2010

CEN

EN 12794:2005+A1:2007

Precast concrete products — Foundation piles

EN 12794:2005

1.2.2008

1.2.2009

 

EN 12794:2005+A1:2007/AC:2008

 

1.8.2009

1.8.2009

CEN

EN 12809:2001

Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods

 

1.7.2005

1.7.2007

 

EN 12809:2001/AC:2006

 

1.1.2008

1.1.2008

 

EN 12809:2001/A1:2004

 

1.7.2005

1.7.2007

 

EN 12809:2001/A1:2004/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 12815:2001

Residential cookers fired by solid fuel — Requirements and test methods

 

1.7.2005

1.7.2007

 

EN 12815:2001/AC:2006

 

1.1.2007

1.1.2007

 

EN 12815:2001/A1:2004

 

1.7.2005

1.7.2007

 

EN 12815:2001/A1:2004/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 12839:2012

Precast concrete products — Elements for fences

EN 12839:2001

1.10.2012

1.10.2013

CEN

EN 12843:2004

Precast concrete products — Masts and poles

 

1.9.2005

1.9.2007

CEN

EN 12859:2011

Gypsum blocks — Definitions, requirements and test methods

EN 12859:2008

1.12.2011

1.12.2012

CEN

EN 12860:2001

Gypsum based adhesives for gypsum blocks — Definitions, requirements and test methods

 

1.4.2002

1.4.2003

 

EN 12860:2001/AC:2002

 

1.1.2010

1.1.2010

CEN

EN 12878:2005

Pigments for the colouring of building materials based on cement and/or lime — Specifications and methods of test

 

1.3.2006

1.3.2007

 

EN 12878:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 12899-1:2007

Fixed, vertical road traffic signs — Part 1: Fixed signs

 

1.1.2009

1.1.2013

CEN

EN 12899-2:2007

Fixed, vertical road traffic signs — Part 2: Transilluminated traffic bollards (TTB)

 

1.1.2009

1.1.2013

CEN

EN 12899-3:2007

Fixed, vertical road traffic signs — Part 3: Delineator posts and retroreflectors

 

1.1.2009

1.1.2013

CEN

EN 12951:2004

Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods

 

1.9.2005

1.9.2006

CEN

EN 12966-1:2005+A1:2009

Road vertical signs — Variable message traffic signs — Part 1: Product standard

 

1.8.2010

1.8.2010

CEN

EN 13024-2:2004

Glass in building — Thermally toughened borosilicate safety glass — Part 2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 13043:2002

Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas

 

1.7.2003

1.6.2004

 

EN 13043:2002/AC:2004

 

1.6.2006

1.6.2006

CEN

EN 13055-1:2002

Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout

 

1.3.2003

1.6.2004

 

EN 13055-1:2002/AC:2004

 

1.1.2010

1.1.2010

CEN

EN 13055-2:2004

Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications

 

1.5.2005

1.5.2006

CEN

EN 13063-1:2005+A1:2007

Chimneys — System chimneys with clay/ceramic flue liners — Part 1: Requirements and test methods for sootfire resistance

EN 13063-1:2005

1.5.2008

1.5.2009

CEN

EN 13063-2:2005+A1:2007

Chimneys — System chimneys with clay/ceramic flue liners — Part 2: Requirements and test methods under wet conditions

EN 13063-2:2005

1.5.2008

1.5.2009

CEN

EN 13063-3:2007

Chimneys — System chimneys with clay/ceramic flue liners — Part 3: Requirements and test methods for air flue system chimneys

 

1.5.2008

1.5.2009

CEN

EN 13069:2005

Chimneys — Clay/ceramic outer walls for system chimneys — Requirements and test methods

 

1.5.2006

1.5.2007

CEN

EN 13084-5:2005

Free-standing chimneys — Part 5: Material for brick liners — Product specifications

 

1.4.2006

1.4.2007

 

EN 13084-5:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 13084-7:2012

Free-standing chimneys — Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners

EN 13084-7:2005

1.9.2013

1.9.2013

CEN

EN 13101:2002

Steps for underground man entry chambers — Requirements, marking, testing and evaluation of conformity

 

1.8.2003

1.8.2004

CEN

EN 13108-1:2006

Bituminous mixtures — Material specifications — Part 1: Asphalt Concrete

 

1.3.2007

1.3.2008

 

EN 13108-1:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-2:2006

Bituminous mixtures — Material specifications — Part 2: Asphalt Concrete for very thin layers

 

1.3.2007

1.3.2008

 

EN 13108-2:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-3:2006

Bituminous mixtures — Material specifications — Part 3: Soft Asphalt

 

1.3.2007

1.3.2008

 

EN 13108-3:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-4:2006

Bituminous mixtures — Material specifications — Part 4: Hot Rolled Asphalt

 

1.3.2007

1.3.2008

 

EN 13108-4:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-5:2006

Bituminous mixtures — Material specifications — Part 5: Stone Mastic Asphalt

 

1.3.2007

1.3.2008

 

EN 13108-5:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-6:2006

Bituminous mixtures — Material specifications — Part 6: Mastic Asphalt

 

1.3.2007

1.3.2008

 

EN 13108-6:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13108-7:2006

Bituminous mixtures — Material specifications — Part 7: Porous Asphalt

 

1.3.2007

1.3.2008

 

EN 13108-7:2006/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 13139:2002

Aggregates for mortar

 

1.3.2003

1.6.2004

 

EN 13139:2002/AC:2004

 

1.1.2010

1.1.2010

CEN

EN 13160-1:2003

Leak detection systems — Part 1: General principles

 

1.3.2004

1.3.2005

CEN

EN 13162:2012+A1:2015

Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification

EN 13162:2012

10.7.2015

10.7.2016

CEN

EN 13163:2012+A1:2015

Thermal insulation products for buildings — Factory made expanded polystyrene (EPS) products — Specification

EN 13163:2012

10.7.2015

10.7.2016

CEN

EN 13164:2012+A1:2015

Thermal insulation products for buildings — Factory made extruded polystyrene foam (XPS) products — Specification

EN 13164:2012

10.7.2015

10.7.2016

CEN

EN 13165:2012+A1:2015

Thermal insulation products for buildings — Factory made rigid polyurethane foam (PU) products — Specification

EN 13165:2012

10.7.2015

10.7.2016

CEN

EN 13166:2012+A1:2015

Thermal insulation products for buildings — Factory made phenolic foam (PF) products — Specification

EN 13166:2012

10.7.2015

10.7.2016

CEN

EN 13167:2012+A1:2015

Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification

EN 13167:2012

10.7.2015

10.7.2016

CEN

EN 13168:2012+A1:2015

Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification

EN 13168:2012

10.7.2015

10.7.2016

CEN

EN 13169:2012+A1:2015

Thermal insulation products for buildings — Factory made expanded perlite board (EPB) products — Specification

EN 13169:2012

10.7.2015

10.7.2016

CEN

EN 13170:2012+A1:2015

Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification

EN 13170:2012

10.7.2015

10.7.2016

CEN

EN 13171:2012+A1:2015

Thermal insulation products for buildings — Factory made wood fibre (WF) products — Specification

EN 13171:2012

10.7.2015

10.7.2016

CEN

EN 13224:2011

Precast concrete products — Ribbed floor elements

EN 13224:2004+A1:2007

1.8.2012

1.8.2013

CEN

EN 13225:2013

Precast concrete products — Linear structural elements

EN 13225:2004

8.8.2014

8.8.2015

CEN

EN 13229:2001

Inset appliances including open fires fired by solid fuels — Requirements and test methods

 

1.7.2005

1.7.2007

 

EN 13229:2001/AC:2006

 

1.7.2007

1.7.2007

 

EN 13229:2001/A1:2003

 

1.6.2006

1.6.2007

 

EN 13229:2001/A2:2004

 

1.7.2005

1.7.2007

 

EN 13229:2001/A2:2004/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 13240:2001

Roomheaters fired by solid fuel — Requirements and test methods

 

1.7.2005

1.7.2007

 

EN 13240:2001/AC:2006

 

1.1.2007

1.1.2007

 

EN 13240:2001/A2:2004

 

1.7.2005

1.7.2007

 

EN 13240:2001/A2:2004/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 13241-1:2003+A1:2011

Industrial, commercial and garage doors and gates — Product standard — Part 1: Products without fire resistance or smoke control characteristics

EN 13241-1:2003

1.1.2012

1.1.2013

CEN

EN 13242:2002+A1:2007

Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction

EN 13242:2002

1.1.2009

1.1.2010

CEN

EN 13245-2:2008

Plastics — Unplasticized polyvinyl chloride (PVC-U) profiles for building applications — Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes

 

1.7.2010

1.7.2012

 

EN 13245-2:2008/AC:2009

 

1.7.2010

1.7.2010

CEN

EN 13249:2000

Geotextiles and geotextile-related products — Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)

 

1.10.2001

1.10.2002

 

EN 13249:2000/A1:2005

 

1.11.2005

1.11.2006

CEN

EN 13250:2000

Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways

 

1.10.2001

1.10.2002

 

EN 13250:2000/A1:2005

 

1.6.2006

1.6.2007

CEN

EN 13251:2000

Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures

 

1.10.2001

1.10.2002

 

EN 13251:2000/A1:2005

 

1.6.2006

1.6.2007

CEN

EN 13252:2000

Geotextiles and geotextile-related products — Characteristics required for use in drainage systems

 

1.10.2001

1.10.2002

 

EN 13252:2000/A1:2005

 

1.6.2006

1.6.2007

CEN

EN 13253:2000

Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments)

 

1.10.2001

1.10.2002

 

EN 13253:2000/A1:2005

 

1.6.2006

1.6.2007

CEN

EN 13254:2000

Geotextiles and geotextile-related products — Characteristics required for use in the construction of reservoirs and dams

 

1.10.2001

1.10.2002

 

EN 13254:2000/A1:2005

 

1.6.2006

1.6.2007

 

EN 13254:2000/AC:2003

 

1.6.2006

1.6.2006

CEN

EN 13255:2000

Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals

 

1.10.2001

1.10.2002

 

EN 13255:2000/A1:2005

 

1.6.2006

1.6.2007

 

EN 13255:2000/AC:2003

 

1.6.2006

1.6.2006

CEN

EN 13256:2000

Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures

 

1.10.2001

1.10.2002

 

EN 13256:2000/A1:2005

 

1.6.2006

1.6.2007

 

EN 13256:2000/AC:2003

 

1.6.2006

1.6.2006

CEN

EN 13257:2000

Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals

 

1.10.2001

1.10.2002

 

EN 13257:2000/A1:2005

 

1.6.2006

1.6.2007

 

EN 13257:2000/AC:2003

 

1.6.2006

1.6.2006

CEN

EN 13263-1:2005+A1:2009

Silica fume for concrete — Part 1: Definitions, requirements and conformity criteria

EN 13263-1:2005

1.1.2010

1.1.2011

CEN

EN 13265:2000

Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects

 

1.10.2001

1.10.2002

 

EN 13265:2000/A1:2005

 

1.6.2006

1.6.2007

 

EN 13265:2000/AC:2003

 

1.6.2006

1.6.2006

CEN

EN 13279-1:2008

Gypsum binders and gypsum plasters — Part 1: Definitions and requirements

EN 13279-1:2005

1.10.2009

1.10.2010

CEN

EN 13282-1:2013

Hydraulic road binders — Part 1: Rapid hardening hydraulic road binders — Composition, specifications and conformity criteria

 

1.11.2013

1.11.2014

CEN

EN 13310:2003

Kitchen sinks — Functional requirements and test methods

 

1.2.2004

1.2.2006

CEN

EN 13341:2005+A1:2011

Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels — Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 — Requirements and test methods

EN 13341:2005

1.10.2011

1.10.2011

CEN

EN 13361:2004

Geosynthetic barriers — Characteristics required for use in the construction of reservoirs and dams

 

1.9.2005

1.9.2006

 

EN 13361:2004/A1:2006

 

1.6.2007

1.6.2008

CEN

EN 13362:2005

Geosynthetic Barriers — Characteristics required for use in the construction of canals

 

1.2.2006

1.2.2007

CEN

EN 13383-1:2002

Armourstone — Part 1: Specification

 

1.3.2003

1.6.2004

 

EN 13383-1:2002/AC:2004

 

1.1.2010

1.1.2010

CEN

EN 13407:2006

Wall-hung urinals — Functional requirements and test methods

 

1.1.2008

1.1.2009

CEN

EN 13450:2002

Aggregates for railway ballast

 

1.10.2003

1.6.2004

 

EN 13450:2002/AC:2004

 

1.1.2007

1.1.2007

CEN

EN 13454-1:2004

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate — Part 1: Definitions and requirements

 

1.7.2005

1.7.2006

CEN

EN 13479:2004

Welding consumables — General product standard for filler metals and fluxes for fusion welding of metallic materials

 

1.10.2005

1.10.2006

CEN

EN 13491:2004

Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures

 

1.9.2005

1.9.2006

 

EN 13491:2004/A1:2006

 

1.6.2007

1.6.2008

CEN

EN 13492:2004

Geosynthetic barriers — Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

 

1.9.2005

1.9.2006

 

EN 13492:2004/A1:2006

 

1.6.2007

1.6.2008

CEN

EN 13493:2005

Geosynthetic barriers — Characteristics required for use in the construction of solid waste storage and disposal sites

 

1.3.2006

1.3.2007

CEN

EN 13502:2002

Chimneys — Requirements and test methods for clay/ceramic flue terminals

 

1.8.2003

1.8.2004

CEN

EN 13561:2004+A1:2008

External blinds — Performance requirements including safety

EN 13561:2004

1.8.2009

1.8.2010

CEN

EN 13564-1:2002

Anti-flooding devices for buildings — Part 1: Requirements

 

1.5.2003

1.5.2004

CEN

EN 13616:2004

Overfill prevention devices for static tanks for liquid petroleum fuels

 

1.5.2005

1.5.2006

 

EN 13616:2004/AC:2006

 

1.6.2006

1.6.2006

CEN

EN 13658-1:2005

Metal lath and beads — Definitions, requirements and test methods — Part 1: Internal plastering

 

1.3.2006

1.3.2007

CEN

EN 13658-2:2005

Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering

 

1.3.2006

1.3.2007

CEN

EN 13659:2004+A1:2008

Shutters — Performance requirements including safety

EN 13659:2004

1.8.2009

1.8.2010

CEN

EN 13693:2004+A1:2009

Precast concrete products — Special roof elements

EN 13693:2004

1.5.2010

1.5.2011

CEN

EN 13707:2004+A2:2009

Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics

 

1.4.2010

1.10.2010

CEN

EN 13747:2005+A2:2010

Precast concrete products — Floor plates for floor systems

EN 13747:2005+A1:2008

1.1.2011

1.1.2011

CEN

EN 13748-1:2004

Terrazzo tiles — Part 1: Terrazzo tiles for internal use

 

1.6.2005

1.10.2006

 

EN 13748-1:2004/AC:2005

 

1.6.2005

1.6.2005

 

EN 13748-1:2004/A1:2005

 

1.4.2006

1.10.2006

CEN

EN 13748-2:2004

Terrazzo tiles — Part 2: Terrazzo tiles for external use

 

1.4.2005

1.4.2006

CEN

EN 13808:2013

Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions

EN 13808:2005

8.8.2014

8.8.2015

CEN

EN 13813:2002

Screed material and floor screeds — Screed material — Properties and requirements

 

1.8.2003

1.8.2004

CEN

EN 13815:2006

Fibrous gypsum plaster casts — Definitions, requirements and test methods

 

1.6.2007

1.6.2008

CEN

EN 13830:2003

Curtain walling — Product standard

 

1.12.2004

1.12.2005

CEN

EN 13859-1:2010

Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 1: Underlays for discontinuous roofing

 

1.4.2011

1.4.2012

CEN

EN 13859-2:2010

Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 2: Underlays for walls

 

1.4.2011

1.4.2012

CEN

EN 13877-3:2004

Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements

 

1.9.2005

1.9.2006

CEN

EN 13915:2007

Prefabricated gypsum plasterboard panels with a cellular paperboard core — Definitions, requirements and test methods

 

1.6.2008

1.6.2009

CEN

EN 13924:2006

Bitumen and bituminous binders — Specifications for hard paving grade bitumens

 

1.1.2010

1.1.2011

 

EN 13924:2006/AC:2006

 

1.1.2010

1.1.2010

CEN

EN 13950:2014

Gypsum board thermal/acoustic insulation composite panels — Definitions, requirements and test methods

EN 13950:2005

13.2.2015

13.2.2016

CEN

EN 13956:2012

Flexible sheets for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics

EN 13956:2005

1.10.2013

1.10.2013

CEN

EN 13963:2005

Jointing materials for gypsum plasterboards — Definitions, requirements and test methods

 

1.3.2006

1.3.2007

 

EN 13963:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 13964:2004

Suspended ceilings — Requirements and test methods

 

1.1.2005

1.7.2007

 

EN 13964:2004/A1:2006

 

1.1.2008

1.1.2009

CEN

EN 13967:2012

Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and characteristics

EN 13967:2004

1.3.2013

1.7.2013

CEN

EN 13969:2004

Flexible sheets for waterproofing — Bitumen damp proof sheets including bitumen basement tanking sheets — Definitions and characteristics

 

1.9.2005

1.9.2006

 

EN 13969:2004/A1:2006

 

1.1.2008

1.1.2009

CEN

EN 13970:2004

Flexible sheets for waterproofing — Bitumen water vapour control layers — Definitions and characteristics

 

1.9.2005

1.9.2006

 

EN 13970:2004/A1:2006

 

1.1.2008

1.1.2009

CEN

EN 13978-1:2005

Precast concrete products — Precast concrete garages — Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions

 

1.3.2006

1.3.2008

CEN

EN 13984:2013

Flexible sheets for waterproofing — Plastic and rubber vapour control layers — Definitions and characteristics

EN 13984:2004

1.11.2013

1.11.2013

CEN

EN 13986:2004+A1:2015

Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking

EN 13986:2004

13.11.2015

13.11.2016

CEN

EN 14016-1:2004

Binders for magnesite screeds — Caustic magnesia and magnesium chloride — Part 1: Definitions, requirements

 

1.12.2004

1.12.2005

CEN

EN 14023:2010

Bitumen and bituminous binders — Specification framework for polymer modified bitumens

 

1.1.2011

1.1.2012

CEN

EN 14037-1:2003

Ceiling mounted radiant panels supplied with water at temperature below 120 oC — Part 1: Technical specifications and requirements

 

1.2.2004

1.2.2005

CEN

EN 14041:2004

Resilient, textile and laminate floor coverings — Essential characteristics

 

1.1.2006

1.1.2007

 

EN 14041:2004/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 14055:2010

WC and urinal flushing cisterns

 

1.9.2011

1.9.2012

CEN

EN 14063-1:2004

Thermal insulation products for buildings — In-situ formed expanded clay lightweight aggregate products — Part 1: Specification for the loose-fill products before installation

 

1.6.2005

1.6.2006

 

EN 14063-1:2004/AC:2006

 

1.1.2008

1.1.2008

CEN

EN 14064-1:2010

Thermal insulation products for buildings — In-situ formed loose-fill mineral wool (MW) products — Part 1: Specification for the loose-fill products before installation

 

1.12.2010

1.12.2011

CEN

EN 14080:2013

Timber structures — Glued laminated timber and glued solid timber — Requirements

EN 14080:2005

8.8.2014

8.8.2015

CEN

EN 14081-1:2005+A1:2011

Timber structures — Strength graded structural timber with rectangular cross section — Part 1: General requirements

EN 14081-1:2005

1.10.2011

31.12.2011

CEN

EN 14178-2:2004

Glass in building — Basic alkaline earth silicate glass products — Part 2: Evaluation of conformity/Product standard

 

1.9.2005

1.9.2006

CEN

EN 14179-2:2005

Glass in building — Heat soaked thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

1.3.2006

1.3.2007

CEN

EN 14188-1:2004

Joint fillers and sealants — Part 1: Specifications for hot applied sealants

 

1.7.2005

1.1.2007

CEN

EN 14188-2:2004

Joint fillers and sealants — Part 2: Specifications for cold applied sealants

 

1.10.2005

1.1.2007

CEN

EN 14188-3:2006

Joint fillers and sealants — Part 3: Specifications for preformed joint seals

 

1.11.2006

1.11.2007

CEN

EN 14190:2014

Gypsum board products from reprocessing — Definitions, requirements and test methods

EN 14190:2005

13.2.2015

13.2.2016

CEN

EN 14195:2005

Metal framing components for gypsum plasterboard systems — Definitions, requirements and test methods

 

1.1.2006

1.1.2007

 

EN 14195:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 14209:2005

Preformed plasterboard cornices — Definitions, requirements and test methods

 

1.9.2006

1.9.2007

CEN

EN 14216:2004

Cement — Composition, specifications and conformity criteria for very low heat special cements

 

1.2.2005

1.2.2006

CEN

EN 14229:2010

Structural timber — Wood poles for overhead lines

 

1.9.2011

1.9.2012

CEN

EN 14246:2006

Gypsum elements for suspended ceilings — Definitions, requirements and test methods

 

1.4.2007

1.4.2008

 

EN 14246:2006/AC:2007

 

1.1.2008

1.1.2008

CEN

EN 14250:2010

Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners

EN 14250:2004

1.11.2010

1.11.2010

CEN

EN 14296:2005

Sanitary appliances — Communal washing troughs

 

1.3.2006

1.3.2008

CEN

EN 14303:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made mineral wool (MW) products — Specification

EN 14303:2009

1.11.2013

1.11.2013

CEN

EN 14304:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made flexible elastomeric foam (FEF) products — Specification

EN 14304:2009

1.11.2013

1.11.2013

CEN

EN 14305:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made cellular glass (CG) products — Specification

EN 14305:2009

1.11.2013

1.11.2013

CEN

EN 14306:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made calcium silicate (CS) products — Specification

EN 14306:2009

1.11.2013

1.11.2013

CEN

EN 14307:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made extruded polystyrene foam (XPS) products — Specification

EN 14307:2009

1.11.2013

1.11.2013

CEN

EN 14308:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products — Specification

EN 14308:2009

1.11.2013

1.11.2013

CEN

EN 14309:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made products of expanded polystyrene (EPS) — Specification

EN 14309:2009

1.11.2013

1.11.2013

CEN

EN 14313:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made polyethylene foam (PEF) products — Specification

EN 14313:2009

1.11.2013

1.11.2013

CEN

EN 14314:2009+A1:2013

Thermal insulation products for building equipment and industrial installations — Factory made phenolic foam (PF) products — Specification

EN 14314:2009

1.11.2013

1.11.2013

CEN

EN 14315-1:2013

Thermal insulating products for buildings — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam spray system before installation

 

1.11.2013

1.11.2014

CEN

EN 14316-1:2004

Thermal insulation products for buildings — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation

 

1.6.2005

1.6.2006

CEN

EN 14317-1:2004

Thermal insulation products for buildings — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation

 

1.6.2005

1.6.2006

CEN

EN 14318-1:2013

Thermal insulating products for buildings — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam dispensed system before installation

 

1.11.2013

1.11.2014

CEN

EN 14319-1:2013

Thermal insulating products for building equipment and industrial installations — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam dispensed system before installation

 

1.11.2013

1.11.2014

CEN

EN 14320-1:2013

Thermal insulating products for building equipment and industrial installations — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam spray system before installation

 

1.11.2013

1.11.2014

CEN

EN 14321-2:2005

Glass in building — Thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

1.6.2006

1.6.2007

CEN

EN 14339:2005

Underground fire hydrants

 

1.5.2006

1.5.2007

CEN

EN 14342:2013

Wood flooring and parquet — Characteristics, evaluation of conformity and marking

EN 14342:2005+A1:2008

8.8.2014

8.8.2015

CEN

EN 14351-1:2006+A1:2010

Windows and doors — Product standard, performance characteristics — Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

EN 14351-1:2006

1.12.2010

1.12.2010

CEN

EN 14353:2007+A1:2010

Metal beads and feature profiles for use with gypsum plasterboards — Definitions, requirements and test methods

EN 14353:2007

1.11.2010

1.11.2010

CEN

EN 14374:2004

Timber structures — Structural laminated veneer lumber — Requirements

 

1.9.2005

1.9.2006

CEN

EN 14384:2005

Pillar fire hydrants

 

1.5.2006

1.5.2007

CEN

EN 14388:2005

Road traffic noise reducing devices — Specifications

 

1.5.2006

1.5.2007

 

EN 14388:2005/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 14396:2004

Fixed ladders for manholes

 

1.12.2004

1.12.2005

CEN

EN 14399-1:2005

High-strength structural bolting assemblies for preloading — Part 1: General requirements

 

1.1.2006

1.10.2007

CEN

EN 14411:2012

Ceramic tiles — Definitions, classification, characteristics, evaluation of conformity and marking

EN 14411:2006

1.7.2013

1.7.2014

CEN

EN 14428:2004+A1:2008

Shower enclosures — Functional requirements and test methods

EN 14428:2004

1.1.2009

1.1.2010

CEN

EN 14449:2005

Glass in building — Laminated glass and laminated safety glass — Evaluation of conformity/Product standard

 

1.3.2006

1.3.2007

 

EN 14449:2005/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 14471:2013+A1:2015

Chimneys — System chimneys with plastic flue liners — Requirements and test methods

EN 14471:2013

10.7.2015

10.7.2016

CEN

EN 14496:2005

Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards — Definitions, requirements and test methods

 

1.9.2006

1.9.2007

CEN

EN 14509:2013

Self-supporting double skin metal faced insulating panels — Factory made products — Specifications

EN 14509:2006

8.8.2014

8.8.2015

CEN

EN 14516:2006+A1:2010

Baths for domestic purposes

 

1.5.2011

1.5.2012

CEN

EN 14527:2006+A1:2010

Shower trays for domestic purposes

 

1.5.2011

1.5.2012

CEN

EN 14528:2007

Bidets — Functional requirements and test methods

EN 14528:2005

1.1.2008

1.1.2009

CEN

EN 14545:2008

Timber structures — Connectors — Requirements

 

1.8.2009

1.8.2010

CEN

EN 14566:2008+A1:2009

Mechanical fasteners for gypsum plasterboard systems — Definitions, requirements and test methods

EN 14566:2008

1.5.2010

1.11.2010

CEN

EN 14592:2008+A1:2012

Timber structures — Dowel-type fasteners — Requirements

EN 14592:2008

1.3.2013

1.7.2013

CEN

EN 14604:2005

Smoke alarm devices

 

1.5.2006

1.8.2008

 

EN 14604:2005/AC:2008

 

1.8.2009

1.8.2009

CEN

EN 14647:2005

Calcium aluminate cement — Composition, specifications and conformity criteria

 

1.8.2006

1.8.2007

 

EN 14647:2005/AC:2006

 

1.1.2008

1.1.2008

CEN

EN 14680:2006

Adhesives for non-pressure thermoplastic piping systems — Specifications

 

1.1.2008

1.1.2009

CEN

EN 14688:2006

Sanitary appliances — Wash basins — Functional requirements and test methods

 

1.1.2008

1.1.2009

CEN

EN 14695:2010

Flexible sheets for waterproofing — Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete — Definitions and characteristics

 

1.10.2010

1.10.2011

CEN

EN 14716:2004

Stretched ceilings — Requirements and test methods

 

1.10.2005

1.10.2006

CEN

EN 14782:2006

Self-supporting metal sheet for roofing, external cladding and internal lining — Product specification and requirements

 

1.11.2006

1.11.2007

CEN

EN 14783:2013

Fully supported metal sheet and strip for roofing, external cladding and internal lining — Product specification and requirements

EN 14783:2006

8.8.2014

8.8.2015

CEN

EN 14785:2006

Residential space heating appliances fired by wood pellets — Requirements and test methods

 

1.1.2010

1.1.2011

CEN

EN 14800:2007

Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels

 

1.1.2008

1.1.2009

CEN

EN 14814:2007

Adhesives for thermoplastic piping systems for fluids under pressure — Specifications

 

1.1.2008

1.1.2009

CEN

EN 14843:2007

Precast concrete products — Stairs

 

1.1.2008

1.1.2009

CEN

EN 14844:2006+A2:2011

Precast concrete products — Box culverts

EN 14844:2006+A1:2008

1.9.2012

1.9.2013

CEN

EN 14846:2008

Building hardware — Locks and latches — Electromechanically operated locks and striking plates — Requirements and test methods

 

1.9.2011

1.9.2012

CEN

EN 14889-1:2006

Fibres for concrete — Part 1: Steel fibres — Definitions, specifications and conformity

 

1.6.2007

1.6.2008

CEN

EN 14889-2:2006

Fibres for concrete — Part 2: Polymer fibres — Definitions, specifications and conformity

 

1.6.2007

1.6.2008

CEN

EN 14891:2012

Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, evaluation of conformity, classification and designation

 

1.3.2013

1.3.2014

 

EN 14891:2012/AC:2012

 

1.3.2013

1.3.2013

CEN

EN 14904:2006

Surfaces for sports areas — Indoor surfaces for multi-sports use — Specification

 

1.2.2007

1.2.2008

CEN

EN 14909:2012

Flexible sheets for waterproofing — Plastic and rubber damp proof courses — Definitions and characteristics

EN 14909:2006

1.3.2013

1.7.2013

CEN

EN 14915:2013

Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking

EN 14915:2006

8.8.2014

8.8.2015

CEN

EN 14933:2007

Thermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded polystyrene (EPS) — Specification

 

1.7.2008

1.7.2009

CEN

EN 14934:2007

Thermal insulation and light weight fill products for civil engineering applications — Factory made products of extruded polystyrene foam (XPS) — Specification

 

1.7.2008

1.7.2009

CEN

EN 14963:2006

Roof coverings — Continuous rooflights of plastics with or without upstands — Classification, requirements and test methods

 

1.8.2009

1.8.2012

CEN

EN 14964:2006

Rigid underlays for discontinuous roofing — Definitions and characteristics

 

1.1.2008

1.1.2009

CEN

EN 14967:2006

Flexible sheets for waterproofing — Bitumen damp proof courses — Definitions and characteristics

 

1.3.2007

1.3.2008

CEN

EN 14989-1:2007

Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 1: Vertical air/flue terminals for C6-type appliances

 

1.1.2008

1.1.2009

CEN

EN 14989-2:2007

Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 2: Flue and air supply ducts for room sealed appliances

 

1.1.2009

1.1.2010

CEN

EN 14991:2007

Precast concrete products — Foundation elements

 

1.1.2008

1.1.2009

CEN

EN 14992:2007+A1:2012

Precast concrete products — Wall elements

EN 14992:2007

1.4.2013

1.7.2013

CEN

EN 15037-1:2008

Precast concrete products — Beam-and-block floor systems — Part 1: Beams

 

1.1.2010

1.1.2011

CEN

EN 15037-2:2009+A1:2011

Precast concrete products — Beam-and-block floor systems — Part 2: Concrete blocks

 

1.12.2011

1.12.2012

CEN

EN 15037-3:2009+A1:2011

Precast concrete products — Beam-and-block floor systems — Part 3: Clay blocks

 

1.12.2011

1.12.2012

CEN

EN 15037-4:2010+A1:2013

Precast concrete products — Beam-and-block floor systems — Part 4: Expanded polystyrene blocks

EN 15037-4:2010

8.8.2014

8.8.2015

CEN

EN 15037-5:2013

Precast concrete products — Beam-and-block floor systems — Part 5: Lightweight blocks for simple formwork

 

8.8.2014

8.8.2015

CEN

EN 15048-1:2007

Non-preloaded structural bolting assemblies — Part 1: General requirements

 

1.1.2008

1.10.2009

CEN

EN 15050:2007+A1:2012

Precast concrete products — Bridge elements

EN 15050:2007

1.12.2012

1.12.2012

CEN

EN 15069:2008

Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel

 

1.1.2009

1.1.2010

CEN

EN 15088:2005

Aluminium and aluminium alloys — Structural products for construction works — Technical conditions for inspection and delivery

 

1.10.2006

1.10.2007

CEN

EN 15102:2007+A1:2011

Decorative wall coverings — Roll and panel form

EN 15102:2007

1.7.2012

1.7.2012

CEN

EN 15129:2009

Anti-seismic devices

 

1.8.2010

1.8.2011

CEN

EN 15167-1:2006

Ground granulated blast furnace slag for use in concrete, mortar and grout — Part 1: Definitions, specifications and conformity criteria

 

1.1.2008

1.1.2009

CEN

EN 15250:2007

Slow heat release appliances fired by solid fuel — Requirements and test methods

 

1.1.2008

1.1.2010

CEN

EN 15258:2008

Precast concrete products — Retaining wall elements

 

1.1.2010

1.1.2011

CEN

EN 15274:2015

General purpose adhesives for structural assembly — Requirements and test methods

EN 15274:2007

13.11.2015

13.11.2016

CEN

EN 15275:2015

Structural adhesives — Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures

EN 15275:2007

13.11.2015

13.11.2016

CEN

EN 15283-1:2008+A1:2009

Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 1: Gypsum boards with mat reinforcement

EN 15283-1:2008

1.6.2010

1.6.2011

CEN

EN 15283-2:2008+A1:2009

Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 2: Gypsum fibre boards

EN 15283-2:2008

1.6.2010

1.6.2011

CEN

EN 15285:2008

Agglomerated stone — Modular tiles for flooring and stairs (internal and external)

 

1.1.2009

1.1.2010

 

EN 15285:2008/AC:2008

 

1.1.2009

1.1.2009

CEN

EN 15286:2013

Agglomerated stone — Slabs and tiles for wall finishes (internal and external)

 

8.8.2014

8.8.2015

CEN

EN 15322:2013

Bitumen and bituminous binders — Framework for specifying cut-back and fluxed bituminous binders

EN 15322:2009

8.8.2014

8.8.2015

CEN

EN 15368:2008+A1:2010

Hydraulic binder for non-structural applications — Definition, specifications and conformity criteria

 

1.9.2011

1.9.2012

CEN

EN 15381:2008

Geotextiles and geotextile-related products — Characteristics required for use in pavements and asphalt overlays

 

1.1.2010

1.1.2011

CEN

EN 15382:2013

Geosynthetic barriers — Characteristics required for use in transportation infrastructure

EN 15382:2008

8.8.2014

8.8.2015

CEN

EN 15435:2008

Precast concrete products — Normal weight and lightweight concrete shuttering blocks — Product properties and performance

 

1.2.2009

1.2.2010

CEN

EN 15497:2014

Structural finger jointed solid timber — Performance requirements and minimum production requirements

 

10.10.2014

10.10.2015

CEN

EN 15498:2008

Precast concrete products — Wood-chip concrete shuttering blocks — Product properties and performance

 

1.2.2009

1.2.2010

CEN

EN 15501:2013

Thermal insulation products for building equipment and industrial installations — Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products — Specification

 

8.8.2014

8.8.2015

CEN

EN 15599-1:2010

Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation

 

1.4.2011

1.4.2012

CEN

EN 15600-1:2010

Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation

 

1.4.2011

1.4.2012

CEN

EN 15650:2010

Ventilation for buildings — Fire dampers

 

1.9.2011

1.9.2012

CEN

EN 15651-1:2012

Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 1: Sealants for facade elements

 

1.7.2013

1.7.2014

CEN

EN 15651-2:2012

Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 2: Sealants for glazing

 

1.7.2013

1.7.2014

CEN

EN 15651-3:2012

Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 3: Sealants for sanitary joints

 

1.7.2013

1.7.2014

CEN

EN 15651-4:2012

Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 4: Sealants for pedestrian walkways

 

1.7.2013

1.7.2014

CEN

EN 15682-2:2013

Glass in building — Heat soaked thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

8.8.2014

8.8.2015

CEN

EN 15683-2:2013

Glass in building — Thermally toughened soda lime silicate channel shaped safety glass — Part 2: Evaluation of conformity/Product standard

 

8.8.2014

8.8.2015

CEN

EN 15732:2012

Light weight fill and thermal insulation products for civil engineering applications (CEA) — Expanded clay lightweight aggregate products (LWA)

 

1.8.2013

1.8.2014

CEN

EN 15743:2010+A1:2015

Supersulfated cement — Composition, specifications and conformity criteria

EN 15743:2010

13.11.2015

13.11.2016

CEN

EN 15814:2011+A2:2014

Polymer modified bituminous thick coatings for waterproofing — Definitions and requirements

EN 15814:2011+A1:2012

10.7.2015

10.7.2016

CEN

EN 15821:2010

Multi-firing sauna stoves fired by natural wood logs — Requirements and test methods

 

1.7.2011

1.7.2012

CEN

EN 15824:2009

Specifications for external renders and internal plasters based on organic binders

 

1.4.2010

1.4.2011

CEN

EN 16034:2014

Pedestrian doorsets, industrial, commercial, garage doors and openable windows — Product standard, performance characteristics — Fire resisting and/or smoke control characteristics

 

1.9.2016

1.9.2019

CEN

EN 16069:2012+A1:2015

Thermal insulation products for buildings — Factory made products of polyethylene foam (PEF) — Specification

EN 16069:2012

10.7.2015

10.7.2016

CEN

EN 16153:2013+A1:2015

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods

EN 16153:2013

10.7.2015

10.7.2016

Cenelec

EN 50575:2014

Power, control and communication cables — Cables for general applications in construction works subject to reaction to fire requirements

 

1.7.2016

1.7.2017

NOTE:

Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2).

Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal.

References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation.

Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union.

This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.

More information about harmonised standards and other European standards on the Internet at:

http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm


(1)  ESO: European standardisation organisation:

CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu)

CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu)

ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu)

(2)  OJ L 316, 14.11.2012, p. 12.