|
16.1.2015 |
EN |
Official Journal of the European Union |
C 14/1 |
Commission communication in the framework of the implementation of Directive 2004/108/EC of the European Parliament and of the Council on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2015/C 014/01)
|
ESO (1) |
Reference and title of the standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
|
CEN |
EN 617:2001+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
EN 617:2001 Note 2.1 |
Date expired (30.6.2011) |
|
CEN |
EN 618:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
EN 618:2002 Note 2.1 |
Date expired (30.6.2011) |
|
CEN |
EN 619:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads |
EN 619:2002 Note 2.1 |
Date expired (30.4.2011) |
|
CEN |
EN 620:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for fixed belt conveyors for bulk materials |
EN 620:2002 Note 2.1 |
Date expired (30.6.2011) |
|
CEN |
EN 1155:1997 Building hardware — Electrically powered hold-open devices for swing doors — Requirements and test methods |
|
|
|
CEN |
EN 12015:2014 Electromagnetic compatibility — Standard family product for lifts, escalators and moving walks — Emission |
EN 12015:2004 Note 2.1 |
Date expired (30.9.2014) |
|
CEN |
EN 12016:2013 Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity |
EN 12016:2004+A1:2008 Note 2.1 |
Date expired (28.2.2014) |
|
CEN |
EN 12895:2000 Industrial trucks — Electromagnetic compatibility |
|
|
|
CEN |
EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates — Product standard — Part 1: Products without fire resistance or smoke control characteristics |
EN 13241-1:2003 Note 2.1 |
Date expired (31.10.2011) |
|
CEN |
EN 13309:2010 Construction machinery — Electromagnetic compatibility of machines with internal power supply |
EN 13309:2000 Note 2.1 |
Date expired (31.1.2011) |
|
CEN |
EN 14010:2003+A1:2009 Safety of machinery — Equipment for power driven parking of motor vehicles — Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
EN 14010:2003 Note 2.1 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 14982:2009 Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria (ISO 14982:1998) |
EN ISO 14982:1998 Note 2.1 |
Date expired (28.12.2009) |
|
CEN |
EN 16361:2013 Power operated pedestrian doors — Product standard, performance characteristics — Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics |
|
|
|
Cenelec |
EN 50065-1:2011 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 1: General requirements, frequency bands and electromagnetic disturbances |
EN 50065-1:2001 + A1:2010 Note 2.1 |
Date expired (21.3.2014) |
|
Cenelec |
EN 50065-2-1:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments |
Relevant generic standard(s) Note 2.3 |
Date expired (1.10.2004) |
|
|
EN 50065-2-1:2003/AC:2003 |
|
|
|
|
EN 50065-2-1:2003/A1:2005 |
Note 3 |
Date expired (1.7.2008) |
|
Cenelec |
EN 50065-2-2:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments |
Relevant generic standard(s) Note 2.3 |
Date expired (1.10.2004) |
|
|
EN 50065-2-2:2003/AC:2003 |
|
|
|
|
EN 50065-2-2:2003/A1:2005/AC:2006 |
|
|
|
|
EN 50065-2-2:2003/A1:2005 |
Note 3 |
Date expired (1.7.2008) |
|
Cenelec |
EN 50065-2-3:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
Relevant generic standard(s) Note 2.1 |
Date expired (1.8.2004) |
|
|
EN 50065-2-3:2003/AC:2003 |
|
|
|
|
EN 50065-2-3:2003/A1:2005 |
Note 3 |
Date expired (1.7.2008) |
|
Cenelec |
EN 50083-2:2012 Cable networks for television signals, sound signals and interactive services — Part 2: Electromagnetic compatibility for equipment |
EN 50083-2:2006 Note 2.1 |
Date expired (21.6.2013) |
|
Cenelec |
EN 50121-1:2006 Railway applications — Electromagnetic compatibility — Part 1: General |
Relevant generic standard(s) Note 2.1 |
Date expired (1.7.2009) |
|
|
EN 50121-1:2006/AC:2008 |
|
|
|
Cenelec |
EN 50121-2:2006 Railway applications — Electromagnetic compatibility — Part 2: Emission of the whole railway system to the outside world |
Relevant generic standard(s) Note 2.3 |
Date expired (1.7.2009) |
|
|
EN 50121-2:2006/AC:2008 |
|
|
|
Cenelec |
EN 50121-3-1:2006 Railway applications — Electromagnetic compatibility — Part 3-1: Rolling stock — Train and complete vehicle |
Relevant generic standard(s) Note 2.3 |
Date expired (1.7.2009) |
|
|
EN 50121-3-1:2006/AC:2008 |
|
|
|
Cenelec |
EN 50121-3-2:2006 Railway applications — Electromagnetic compatibility — Part 3-2: Rolling stock — Apparatus |
Relevant generic standard(s) Note 2.3 |
Date expired (1.7.2009) |
|
|
EN 50121-3-2:2006/AC:2008 |
|
|
|
Cenelec |
EN 50121-4:2006 Railway applications — Electromagnetic compatibility — Part 4: Emission and immunity of the signalling and telecommunications apparatus |
Relevant generic standard(s) Note 2.3 |
Date expired (1.7.2009) |
|
|
EN 50121-4:2006/AC:2008 |
|
|
|
Cenelec |
EN 50121-5:2006 Railway applications — Electromagnetic compatibility — Part 5: Emission and immunity of fixed power supply installations and apparatus |
Relevant generic standard(s) Note 2.3 |
Date expired (1.7.2009) |
|
|
EN 50121-5:2006/AC:2008 |
|
|
|
Cenelec |
EN 50130-4:2011 Alarm systems — Part 4: Electromagnetic compatibility — Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
EN 50130-4:1995 and its amendments Note 2.2 |
Date expired (13.6.2014) |
|
Cenelec |
EN 50148:1995 Electronic taximeters |
Relevant generic standard(s) Note 2.3 |
Date expired (15.12.1995) |
|
Cenelec |
EN 50270:2006 Electromagnetic compatibility — Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
EN 50270:1999 Note 2.3 |
Date expired (1.6.2009) |
|
Cenelec |
EN 50293:2000 Electromagnetic compatibility — Road traffic signal systems — Product standard |
Relevant generic standard(s) Note 2.3 |
Date expired (1.4.2003) |
|
Cenelec |
EN 50293:2012 Road traffic signal systems — Electromagnetic compatibility |
EN 50293:2000 Note 2.1 |
Date expired (11.5.2015) |
|
Cenelec |
EN 50295:1999 Low-voltage switchgear and controlgear — Controller and device interface systems — Actuator Sensor interface (AS-i) |
Relevant generic standard(s) Note 2.1 |
Date expired (1.12.1999) |
|
Cenelec |
EN 50370-1:2005 Electromagnetic compatibility (EMC) — Product family standard for machine tools — Part 1: Emission |
Relevant generic standard(s) Note 2.1 |
Date expired (1.2.2008) |
|
Cenelec |
EN 50370-2:2003 Electromagnetic compatibility (EMC) — Product family standard for machine tools — Part 2: Immunity |
Relevant generic standard(s) Note 2.1 |
Date expired (1.11.2005) |
|
Cenelec |
EN 50412-2-1:2005 Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz — Part 2-1: Residential, commercial and industrial environment — Immunity requirements |
Relevant generic standard(s) Note 2.1 |
Date expired (1.4.2008) |
|
|
EN 50412-2-1:2005/AC:2009 |
|
|
|
Cenelec |
EN 50428:2005 Switches for household and similar fixed electrical installations — Collateral standard — Switches and related accessories for use in home and building electronic systems (HBES) |
Relevant generic standard(s) Note 2.1 |
Date expired (1.1.2008) |
|
|
EN 50428:2005/A2:2009 |
Note 3 |
Date expired (1.6.2012) |
|
|
EN 50428:2005/A1:2007 |
Note 3 |
Date expired (1.10.2010) |
|
Cenelec |
EN 50470-1:2006 Electricity metering equipment (a.c.) — Part 1: General requirements, tests and test conditions — Metering equipment (class indexes A, B and C) IEC 62052-11:2003 |
Relevant generic standard(s) Note 2.1 |
Date expired (1.5.2009) |
|
Cenelec |
EN 50490:2008 Electrical installations for lighting and beaconing of aerodromes — Technical requirements for aeronautical ground lighting control and monitoring systems — Units for selective switching and monitoring of individual lamps |
Relevant generic standard(s) Note 2.1 |
Date expired (1.4.2011) |
|
Cenelec |
EN 50491-5-1:2010 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 5-1: EMC requirements, conditions and test set-up |
EN 50090-2-2:1996 + A2:2007 Note 2.1 |
Date expired (1.4.2013) |
|
Cenelec |
EN 50491-5-2:2010 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
EN 50090-2-2:1996 + A2:2007 Note 2.1 |
Date expired (1.4.2013) |
|
Cenelec |
EN 50491-5-3:2010 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 5-3: EMC requirements for HBES/BACS used in industry environment |
EN 50090-2-2:1996 + A2:2007 Note 2.1 |
Date expired (1.4.2013) |
|
Cenelec |
EN 50498:2010 Electromagnetic compatibility (EMC) — Product family standard for aftermarket electronic equipment in vehicles |
Relevant generic standard(s) Note 2.1 |
Date expired (1.7.2013) |
|
Cenelec |
EN 50512:2009 Electrical installations for lighting and beaconing of aerodromes — Advanced Visual Docking Guidance Systems (A-VDGS) |
Relevant generic standard(s) Note 2.3 |
Date expired (1.12.2011) |
|
Cenelec |
EN 50529-1:2010 EMC Network Standard — Part 1: Wire-line telecommunications networks using telephone wires |
|
|
|
Cenelec |
EN 50529-2:2010 EMC Network Standard — Part 2: Wire-line telecommunications networks using coaxial cables |
|
|
|
Cenelec |
EN 50550:2011 Power frequency overvoltage protective device for household and similar applications (POP) |
|
|
|
|
EN 50550:2011/A1:2014 |
Note 3 |
Date expired (28.7.2017) |
|
|
EN 50550:2011/AC:2012 |
|
|
|
Cenelec |
EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
|
|
|
Cenelec |
EN 50561-1:2013 Power line communication apparatus used in low-voltage installations — Radio disturbance characteristics — Limits and methods of measurement — Part 1: Apparatus for in-home use |
EN 55022:2010 + EN 55032:2012 Note 2.3 |
Date expired (9.10.2016) |
|
Cenelec |
EN 55011:2009 Industrial, scientific and medical equipment — Radio-frequency disturbance characteristics — Limits and methods of measurement CISPR 11:2009 (Modified) |
EN 55011:2007 + A2:2007 |
Date expired (1.9.2012) |
|
|
EN 55011:2009/A1:2010 CISPR 11:2009/A1:2010 |
Note 3 |
Date expired (1.7.2013) |
|
Cenelec |
EN 55012:2007 Vehicles, boats and internal combustion engines — Radio disturbance characteristics — Limits and methods of measurement for the protection of off-board receivers CISPR 12:2007 |
EN 55012:2002 + A1:2005 |
Date expired (1.9.2010) |
|
|
EN 55012:2007/A1:2009 CISPR 12:2007/A1:2009 |
Note 3 |
Date expired (1.7.2012) |
|
EN 55012 is applicable for giving presumption of conformity under directive 2004/108/EC for those vehicles, boats and internal combustion engine-driven devices that are not within the scope of directives 95/54/EC, 97/24/EC, 2000/2/EC or 2004/104/EC. |
|||
|
Cenelec |
EN 55013:2001 Sound and television broadcast receivers and associated equipment — Radio disturbance characteristics — Limits and methods of measurement CISPR 13:2001 (Modified) |
EN 55013:1990 + A12:1994 + A13:1996 + A14:1999 Note 2.1 |
Date expired (1.9.2004) |
|
|
EN 55013:2001/A1:2003 CISPR 13:2001/A1:2003 |
Note 3 |
Date expired (1.4.2006) |
|
|
EN 55013:2001/A2:2006 CISPR 13:2001/A2:2006 |
Note 3 |
Date expired (1.3.2009) |
|
Cenelec |
EN 55013:2013 Sound and television broadcast receivers and associated equipment — Radio disturbance characteristics — Limits and methods of measurement CISPR 13:2009 (Modified) |
EN 55013:2001 and its amendments |
Date expired (22.4.2016) |
|
Cenelec |
EN 55014-1:2006 Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 1: Emission CISPR 14-1:2005 |
EN 55014-1:2000 + A1:2001 + A2:2002 Note 2.1 |
Date expired (1.9.2009) |
|
|
EN 55014-1:2006/A1:2009 CISPR 14-1:2005/A1:2008 |
Note 3 |
Date expired (1.5.2012) |
|
|
EN 55014-1:2006/A2:2011 CISPR 14-1:2005/A2:2011 |
Note 3 |
Date expired (16.8.2014) |
|
Cenelec |
EN 55014-2:1997 Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 2: Immunity — Product family standard CISPR 14-2:1997 |
EN 55104:1995 Note 2.1 |
Date expired (1.1.2001) |
|
|
EN 55014-2:1997/AC:1997 |
|
|
|
|
EN 55014-2:1997/A1:2001 CISPR 14-2:1997/A1:2001 |
Note 3 |
Date expired (1.12.2004) |
|
|
EN 55014-2:1997/A2:2008 CISPR 14-2:1997/A2:2008 |
Note 3 |
Date expired (1.9.2011) |
|
Cenelec |
EN 55015:2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment CISPR 15:2005 |
EN 55015:2000 + A1:2001 + A2:2002 Note 2.1 |
Date expired (1.9.2009) |
|
|
EN 55015:2006/A1:2007 CISPR 15:2005/A1:2006 |
Note 3 |
Date expired (1.5.2010) |
|
|
EN 55015:2006/A2:2009 CISPR 15:2005/A2:2008 |
Note 3 |
Date expired (1.3.2012) |
|
Cenelec |
EN 55015:2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment CISPR 15:2013 CISPR 15:2013/IS1:2013 CISPR 15:2013/IS2:2013 |
EN 55015:2006 and its amendments |
Date expired (12.6.2016) |
|
Cenelec |
EN 55020:2007 Sound and television broadcast receivers and associated equipment — Immunity characteristics — Limits and methods of measurement CISPR 20:2006 |
EN 55020:2002 + A1:2003 + A2:2005 Note 2.1 |
Date expired (1.12.2009) |
|
|
EN 55020:2007/A11:2011 |
Note 3 |
Date expired (1.1.2013) |
|
Cenelec |
EN 55022:2010 Information technology equipment — Radio disturbance characteristics — Limits and methods of measurement CISPR 22:2008 (Modified) |
EN 55022:2006 + A1:2007 Note 2.1 |
Date expired (1.12.2013) |
|
|
EN 55022:2010/AC:2011 |
|
|
|
Cenelec |
EN 55024:2010 Information technology equipment — Immunity characteristics — Limits and methods of measurement CIS CISPR 24:2010 |
EN 55024:1998 + A1:2001 + A2:2003 |
Date expired (1.12.2013) |
|
Cenelec |
EN 55032:2012 Electromagnetic compatibility of multimedia equipment — Emission requirements CIS CISPR 32:2012 |
EN 55013:2013 + EN 55022:2010 + EN 55103-1:2009 and its amendment Note 2.2 |
Date expired (5.3.2017) |
|
|
EN 55032:2012/AC:2013 |
|
|
|
Cenelec |
EN 55103-1:2009 Electromagnetic compatibility — Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use — Part 1: Emissions |
EN 55103-1:1996 Note 2.1 |
Date expired (1.7.2012) |
|
|
EN 55103-1:2009/A1:2012 |
Note 3 |
Date expired (5.11.2015) |
|
Cenelec |
EN 55103-2:2009 Electromagnetic compatibility — Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use — Part 2: Immunity |
EN 55103-2:1996 Note 2.1 |
Date expired (1.7.2012) |
|
Cenelec |
EN 60034-1:2010 Rotating electrical machines — Part 1: Rating and performance IEC 60034-1:2010 (Modified) |
Relevant generic standard(s) Note 2.1 |
Date expired (1.10.2013) |
|
|
EN 60034-1:2010/AC:2010 |
|
|
|
Cenelec |
EN 60204-31:1998 Safety of machinery — Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems IEC 60204-31:1996 (Modified) |
Relevant generic standard(s) Note 2.3 |
Date expired (1.6.2002) |
|
|
EN 60204-31:1998/AC:2000 |
|
|
|
Cenelec |
EN 60204-31:2013 Safety of machinery — Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems IEC 60204-31:2013 |
EN 60204-31:1998 Note 2.1 |
Date expired (28.5.2016) |
|
Cenelec |
EN 60255-26:2013 Measuring relays and protection equipment — Part 26: Electromagnetic compatibility requirements IEC 60255-26:2013 |
|
|
|
|
EN 60255-26:2013/AC:2013 |
|
|
|
Cenelec |
EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially type-tested assemblies IEC 60439-1:1999 |
EN 60439-1:1994 + A11:1996 Note 2.1 |
Date expired (1.8.2002) |
|
Cenelec |
EN 60669-2-1:2004 Switches for household and similar fixed electrical installations — Part 2-1: Particular requirements — Electronic switches IEC 60669-2-1:2002 (Modified) IEC 60669-2-1:2002/IS1:2011 IEC 60669-2-1:2002/IS2:2012 |
EN 60669-2-1:2000 + A2:2001 |
Date expired (1.7.2009) |
|
|
EN 60669-2-1:2004/AC:2007 |
|
|
|
|
EN 60669-2-1:2004/A1:2009 IEC 60669-2-1:2002/A1:2008 (Modified) |
Note 3 |
Date expired (1.4.2012) |
|
|
EN 60669-2-1:2004/A12:2010 |
Note 3 |
Date expired (1.6.2013) |
|
Cenelec |
EN 60730-1:2000 Automatic electrical controls for household and similar use — Part 1: General requirements IEC 60730-1:1999 (Modified) |
EN 60730-1:1995 and its amendments |
|
|
|
EN 60730-1:2000/AC:2007 |
|
|
|
|
EN 60730-1:2000/A16:2007/AC:2010 |
|
|
|
|
EN 60730-1:2000/A1:2004 IEC 60730-1:1999/A1:2003 (Modified) |
Note 3 |
Date expired (17.3.2005) |
|
|
EN 60730-1:2000/A16:2007 |
Note 3 |
Date expired (1.6.2010) |
|
|
EN 60730-1:2000/A2:2008 IEC 60730-1:1999/A2:2007 (Modified) |
Note 3 |
Date expired (1.6.2011) |
|
Cenelec |
EN 60730-1:2011 Automatic electrical controls for household and similar use — Part 1: General requirements IEC 60730-1:2010 (Modified) |
EN 60730-1:2000 and its amendments Note 2.1 |
Date expired (1.10.2013) |
|
Note on DOW: EN 60730-1:2000 to remain valid until all the Part 2’s which are used in conjunction with it have been withdrawn. |
|||
|
Cenelec |
EN 60730-1:1995 Automatic electrical controls for household and similar use — Part 1: General requirements IEC 60730-1:1993 (Modified) |
|
|
|
|
EN 60730-1:1995/AC:1997 |
|
|
|
|
EN 60730-1:1995/AC:2007 |
|
|
|
|
EN 60730-1:1995/A11:1996 |
Note 3 |
Date expired (1.1.1998) |
|
|
EN 60730-1:1995/A17:2000 |
Note 3 |
Date expired (1.10.2002) |
|
Cenelec |
EN 60730-2-5:2002 Automatic electrical controls for household and similar use — Part 2-5: Particular requirements for automatic electrical burner control systems IEC 60730-2-5:2000 (Modified) |
Relevant generic standard(s) Note 2.1 |
Date expired (1.12.2008) |
|
|
EN 60730-2-5:2002/A1:2004 IEC 60730-2-5:2000/A1:2004 (Modified) |
Note 3 |
Date expired (1.12.2008) |
|
|
EN 60730-2-5:2002/A11:2005 |
Note 3 |
Date expired (1.12.2008) |
|
|
EN 60730-2-5:2002/A2:2010 IEC 60730-2-5:2000/A2:2008 (Modified) |
Note 3 |
Date expired (1.3.2013) |
|
Cenelec |
EN 60730-2-6:2008 Automatic electrical controls for household and similar use — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements IEC 60730-2-6:2007 (Modified) |
EN 60730-2-6:1995 + A1:1997 Note 2.1 |
Date expired (1.7.2011) |
|
Cenelec |
EN 60730-2-7:2010 Automatic electrical controls for household and similar use — Part 2-7: Particular requirements for timers and time switches IEC 60730-2-7:2008 (Modified) |
EN 60730-2-7:1991 + A1:1997 |
Date expired (1.10.2013) |
|
|
EN 60730-2-7:2010/AC:2011 |
|
|
|
Cenelec |
EN 60730-2-8:2002 Automatic electrical controls for household and similar use — Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements IEC 60730-2-8:2000 (Modified) |
EN 60730-2-8:1995 + A1:1997 + A2:1997 Note 2.1 |
Date expired (1.12.2008) |
|
|
EN 60730-2-8:2002/A1:2003 IEC 60730-2-8:2000/A1:2002 (Modified) |
Note 3 |
Date expired (1.12.2008) |
|
Cenelec |
EN 60730-2-9:2010 Automatic electrical controls for household and similar use — Part 2-9: Particular requirements for temperature sensing controls IEC 60730-2-9:2008 (Modified) |
EN 60730-2-9:2002 + A1:2003 + A2:2005 |
Date expired (1.11.2013) |
|
Cenelec |
EN 60730-2-14:1997 Automatic electrical controls for household and similar use — Part 2-14: Particular requirements for electric actuators IEC 60730-2-14:1995 (Modified) |
EN 60730-1:1995 and its amendments Note 2.1 |
Date expired (1.6.2004) |
|
|
EN 60730-2-14:1997/A1:2001 IEC 60730-2-14:1995/A1:2001 |
Note 3 |
Date expired (1.7.2008) |
|
Cenelec |
EN 60730-2-15:2010 Automatic electrical controls for household and similar use — Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls IEC 60730-2-15:2008 (Modified) |
EN 60730-2-18:1999 Note 2.1 |
Date expired (1.3.2013) |
|
Cenelec |
EN 60870-2-1:1996 Telecontrol equipment and systems — Part 2: Operating conditions — Section 1: Power supply and electromagnetic compatibility IEC 60870-2-1:1995 |
Relevant generic standard(s) Note 2.3 |
Date expired (1.9.1996) |
|
Cenelec |
EN 60945:2002 Maritime navigation and radiocommunication equipment and systems — General requirements — Methods of testing and required test results IEC 60945:2002 |
EN 60945:1997 Note 2.1 |
Date expired (1.10.2005) |
|
Cenelec |
EN 60947-1:2007 Low-voltage switchgear and controlgear — Part 1: General rules IEC 60947-1:2007 |
EN 60947-1:2004 Note 2.1 |
Date expired (1.7.2010) |
|
|
EN 60947-1:2007/A1:2011 IEC 60947-1:2007/A1:2010 |
Note 3 |
Date expired (1.1.2014) |
|
Cenelec |
EN 60947-2:2006 Low-voltage switchgear and controlgear — Part 2: Circuit-breakers IEC 60947-2:2006 |
EN 60947-2:2003 Note 2.1 |
Date expired (1.7.2009) |
|
|
EN 60947-2:2006/A1:2009 IEC 60947-2:2006/A1:2009 |
Note 3 |
Date expired (1.7.2012) |
|
|
EN 60947-2:2006/A2:2013 IEC 60947-2:2006/A2:2013 |
Note 3 |
Date expired (7.3.2016) |
|
Cenelec |
EN 60947-3:2009 Low-voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units IEC 60947-3:2008 |
EN 60947-3:1999 + A1:2001 |
Date expired (1.5.2012) |
|
|
EN 60947-3:2009/A1:2012 IEC 60947-3:2008/A1:2012 |
Note 3 |
Date expired (21.3.2015) |
|
Cenelec |
EN 60947-4-1:2010 Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters — Electromechanical contactors and motor-starters IEC 60947-4-1:2009 |
EN 60947-4-1:2001 + A1:2002 + A2:2005 |
Date expired (1.4.2013) |
|
|
EN 60947-4-1:2010/A1:2012 IEC 60947-4-1:2009/A1:2012 |
Note 3 |
Date expired (24.8.2015) |
|
Cenelec |
EN 60947-4-2:2012 Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters — AC semiconductor motor controllers and starters IEC 60947-4-2:2011 |
EN 60947-4-2:2000 EN 60947-4-2:1996# + A2:1998 Note 2.1 |
Date expired (22.6.2014) |
|
Cenelec |
EN 60947-4-3:2000 Low-voltage switchgear and controlgear — Part 4-3: Contactors and motor-starters — AC semiconductor controllers and contactors for non-motor loads IEC 60947-4-3:1999 |
Relevant generic standard(s) Note 2.3 |
Date expired (1.12.2002) |
|
|
EN 60947-4-3:2000/A1:2006 IEC 60947-4-3:1999/A1:2006 |
Note 3 |
Date expired (1.11.2009) |
|
|
EN 60947-4-3:2000/A2:2011 IEC 60947-4-3:1999/A2:2011 |
Note 3 |
Date expired (18.4.2014) |
|
Cenelec |
EN 60947-4-3:2014 Low-voltage switchgear and controlgear — Part 4-3: Contactors and motor-starters — AC semiconductor controllers and contactors for non-motor loads IEC 60947-4-3:2014 |
EN 60947-4-3:2000 Note 2.1 |
Date expired (11.6.2017) |
|
Cenelec |
EN 60947-5-1:2004 Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices IEC 60947-5-1:2003 |
EN 60947-5-1:1997 + A12:1999 Note 2.1 |
Date expired (1.5.2007) |
|
|
EN 60947-5-1:2004/AC:2005 |
|
|
|
|
EN 60947-5-1:2004/A1:2009 IEC 60947-5-1:2003/A1:2009 |
Note 3 |
Date expired (1.5.2012) |
|
Cenelec |
EN 60947-5-2:2007 Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements — Proximity switches IEC 60947-5-2:2007 |
EN 60947-5-2:1998 + A2:2004 |
Date expired (1.11.2010) |
|
|
EN 60947-5-2:2007/A1:2012 IEC 60947-5-2:2007/A1:2012 |
Note 3 |
Date expired (1.11.2015) |
|
Cenelec |
EN 60947-5-3:1999 Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDF) IEC 60947-5-3:1999 |
Relevant generic standard(s) Note 2.1 |
Date expired (1.5.2002) |
|
|
EN 60947-5-3:1999/A1:2005 IEC 60947-5-3:1999/A1:2005 |
Note 3 |
Date expired (1.3.2008) |
|
Cenelec |
EN 60947-5-6:2000 Low-voltage switchgear and controlgear — Part 5-6: Control circuit devices and switching elements — DC interface for proximity sensors and switching amplifiers (NAMUR) IEC 60947-5-6:1999 |
EN 50227:1997 Note 2.1 |
Date expired (1.1.2003) |
|
Cenelec |
EN 60947-5-7:2003 Low-voltage switchgear and controlgear — Part 5-7: Control circuit devices and switching elements — Requirements for proximity devices with analogue output IEC 60947-5-7:2003 |
Relevant generic standard(s) Note 2.1 |
Date expired (1.9.2006) |
|
Cenelec |
EN 60947-5-9:2007 Low-voltage switchgear and controlgear — Part 5-9: Control circuit devices and switching elements — Flow rate switches IEC 60947-5-9:2006 |
|
|
|
Cenelec |
EN 60947-6-1:2005 Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment — Transfer switching equipment IEC 60947-6-1:2005 |
EN 60947-6-1:1991 + A2:1997 Note 2.1 |
Date expired (1.10.2008) |
|
|
EN 60947-6-1:2005/A1:2014 IEC 60947-6-1:2005/A1:2013 |
Note 3 |
Date expired (17.1.2017) |
|
Cenelec |
EN 60947-6-2:2003 Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment — Control and protective switching devices (or equipment) (CPS) IEC 60947-6-2:2002 |
EN 60947-6-2:1993 + A1:1997 Note 2.1 |
Date expired (1.9.2005) |
|
|
EN 60947-6-2:2003/A1:2007 IEC 60947-6-2:2002/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
Cenelec |
EN 60947-8:2003 Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines IEC 60947-8:2003 |
Relevant generic standard(s) Note 2.3 |
Date expired (1.7.2006) |
|
|
EN 60947-8:2003/A1:2006 IEC 60947-8:2003/A1:2006 |
Note 3 |
Date expired (1.10.2009) |
|
|
EN 60947-8:2003/A2:2012 IEC 60947-8:2003/A2:2011 |
Note 3 |
Date expired (22.6.2014) |
|
Cenelec |
EN 60974-10:2007 Arc welding equipment — Part 10: Electromagnetic compatibility (EMC) requirements IEC 60974-10:2007 |
EN 60974-10:2003 Note 2.1 |
Date expired (1.12.2010) |
|
Cenelec |
EN 60974-10:2014 Arc welding equipment — Part 10: Electromagnetic compatibility (EMC) requirements IEC 60974-10:2014 |
EN 60974-10:2007 Note 2.1 |
Date expired (13.3.2017) |
|
Cenelec |
EN 61000-3-2:2006 Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current <= 16 A per phase) IEC 61000-3-2:2005 |
EN 61000-3-2:2000 + A2:2005 Note 2.1 |
Date expired (1.2.2009) |
|
|
EN 61000-3-2:2006/A2:2009 IEC 61000-3-2:2005/A2:2009 |
Note 3 |
Date expired (1.7.2012) |
|
|
EN 61000-3-2:2006/A1:2009 IEC 61000-3-2:2005/A1:2008 |
Note 3 |
Date expired (1.7.2012) |
|
Cenelec |
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) IEC 61000-3-2:2014 |
EN 61000-3-2:2006 Note 2.1 |
Date expired (30.6.2017) |
|
Cenelec |
EN 61000-3-3:2008 Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection IEC 61000-3-3:2008 |
EN 61000-3-3:1995 |
Date expired (1.9.2011) |
|
Cenelec |
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection IEC 61000-3-3:2013 |
EN 61000-3-3:2008 Note 2.1 |
Date expired (18.6.2016) |
|
Cenelec |
EN 61000-3-11:2000 Electromagnetic compatibility (EMC) — Part 3-11: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems — Equipment with rated current <= 75 A and subject to conditional connection IEC 61000-3-11:2000 |
Relevant generic standard(s) Note 2.3 |
Date expired (1.11.2003) |
|
Cenelec |
EN 61000-3-12:2011 Electromagnetic compatibility (EMC) — Part 3-12: Limits — Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase IEC 61000-3-12:2011 IEC 61000-3-12:2011/IS1:2012 |
EN 61000-3-12:2005 Note 2.1 |
Date expired (16.6.2014) |
|
Cenelec |
EN 61000-6-1:2007 Electromagnetic compatibility (EMC) — Part 6-1: Generic standards — Immunity for residential, commercial and light-industrial environments IEC 61000-6-1:2005 |
EN 61000-6-1:2001 Note 2.1 |
Date expired (1.12.2009) |
|
Cenelec |
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity for industrial environments IEC 61000-6-2:2005 |
EN 61000-6-2:2001 Note 2.1 |
Date expired (1.6.2008) |
|
|
EN 61000-6-2:2005/AC:2005 |
|
|
|
Cenelec |
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) — Part 6-3: Generic standards — Emission standard for residential, commercial and light-industrial environments IEC 61000-6-3:2006 |
EN 61000-6-3:2001 + A11:2004 |
Date expired (1.12.2009) |
|
|
EN 61000-6-3:2007/A1:2011 IEC 61000-6-3:2006/A1:2010 |
Note 3 |
Date expired (12.1.2014) |
|
|
EN 61000-6-3:2007/A1:2011/AC:2012 |
|
|
|
Cenelec |
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) — Part 6-4: Generic standards — Emission standard for industrial environments IEC 61000-6-4:2006 |
EN 61000-6-4:2001 Note 2.1 |
Date expired (1.12.2009) |
|
|
EN 61000-6-4:2007/A1:2011 IEC 61000-6-4:2006/A1:2010 |
Note 3 |
Date expired (12.1.2014) |
|
Cenelec |
EN 61008-1:2004 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) — Part 1: General rules IEC 61008-1:1996 (Modified) IEC 61008-1:1996/A1:2002 (Modified) |
EN 61008-1:1994 + A2:1995 + A14:1998 |
Date expired (1.4.2009) |
|
|
EN 61008-1:2004/A12:2009 |
Note 3 |
Date expired (1.12.2011) |
|
Cenelec |
EN 61008-1:2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) — Part 1: General rules IEC 61008-1:2010 (Modified) |
EN 61008-1:2004 and its amendment |
Date expired (18.6.2017) |
|
Cenelec |
EN 61009-1:2004 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) — Part 1: General rules IEC 61 IEC 61009-1:1996 (Modified) IEC 61009-1:1996/A1:2002 (Modified) |
EN 61009-1:1994 + A1:1995 + A14:1998 |
Date expired (1.4.2009) |
|
|
EN 61009-1:2004/AC:2006 |
|
|
|
|
EN 61009-1:2004/A12:2009 |
Note 3 |
Date expired (1.12.2011) |
|
|
EN 61009-1:2004/A13:2009 |
Note 3 |
Date expired (1.12.2011) |
|
Cenelec |
EN 61009-1:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) — Part 1: General rules IEC 61009-1:2010 (Modified) |
EN 61009-1:2004 and its amendments |
Date expired (18.6.2017) |
|
Cenelec |
EN 61131-2:2007 Programmable controllers — Part 2: Equipment requirements and tests IEC 61131-2:2007 |
EN 61131-2:2003 Note 2.1 |
Date expired (1.8.2010) |
|
Cenelec |
EN 61204-3:2000 Low voltage power supplies, d.c. output — Part 3: Electromagnetic compatibility (EMC) IEC 61204-3:2000 |
Relevant generic standard(s) Note 2.3 |
Date expired (1.11.2003) |
|
Cenelec |
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 1: General requirements IEC 61326-1:2005 |
EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 Note 2.1 |
Date expired (1.2.2009) |
|
Cenelec |
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 1: General requirements IEC 61326-1:2012 |
EN 61326-1:2006 Note 2.1 |
Date expired (14.8.2015) |
|
Cenelec |
EN 61326-2-1:2006 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-1: Particular requirements — Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications IEC 61326-2-1:2005 |
EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 Note 2.1 |
Date expired (1.2.2009) |
|
Cenelec |
EN 61326-2-1:2013 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-1: Particular requirements — Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications IEC 61326-2-1:2012 |
EN 61326-2-1:2006 Note 2.1 |
Date expired (6.11.2015) |
|
Cenelec |
EN 61326-2-2:2006 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-2: Particular requirements — Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems IEC 61326-2-2:2005 |
EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 Note 2.1 |
Date expired (1.2.2009) |
|
Cenelec |
EN 61326-2-2:2013 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-2: Particular requirements — Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems IEC 61326-2-2:2012 |
EN 61326-2-2:2006 Note 2.1 |
Date expired (6.11.2015) |
|
Cenelec |
EN 61326-2-3:2006 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-3: Particular requirements — Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning IEC 61326-2-3:2006 |
EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 Note 2.1 |
Date expired (1.8.2009) |
|
Cenelec |
EN 61326-2-3:2013 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-3: Particular requirements — Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning IEC 61326-2-3:2012 |
EN 61326-2-3:2006 Note 2.1 |
Date expired (14.8.2015) |
|
Cenelec |
EN 61326-2-4:2006 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-4: Particular requirements — Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 IEC 6132 IEC 61326-2-4:2006 |
EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 Note 2.1 |
Date expired (1.11.2009) |
|
Cenelec |
EN 61326-2-4:2013 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-4: Particular requirements — Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 IEC 61326-2-4:2012 |
EN 61326-2-4:2006 Note 2.1 |
Date expired (14.8.2015) |
|
Cenelec |
EN 61326-2-5:2006 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-5: Particular requirements — Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 IEC 61326-2-5:2006 |
EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 61326-2-5:2013 Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-5: Particular requirements — Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 IEC 61326-2-5:2012 |
EN 61326-2-5:2006 Note 2.1 |
Date expired (6.11.2015) |
|
Cenelec |
EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies — Part 1: General rules IEC 61439-1:2011 |
EN 61439-1:2009 Note 2.1 |
Date expired (23.9.2014) |
|
Cenelec |
EN 61439-1:2009 Low-voltage switchgear and controlgear assemblies — Part 1: General rules IEC 61439-1:2009 (Modified) |
EN 60439-1:1999 Note 2.1 |
Date expired (1.11.2014) |
|
|
EN 61439-1:2009/AC:2013 |
|
|
|
EN 61439-1:2009 does not give presumption of conformity without another part of the standard. |
|||
|
Cenelec |
EN 61439-2:2011 Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies IEC 61439-2:2011 |
EN 61439-2:2009 Note 2.1 |
Date expired (23.9.2014) |
|
Cenelec |
EN 61439-2:2009 Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies IEC 61439-2:2009 |
|
|
|
Cenelec |
EN 61439-3:2012 Low-voltage switchgear and controlgear assemblies — Part 3: Distribution boards intended to be operated by ordinary persons (DBO) IEC 61439-3:2012 |
|
|
|
Cenelec |
EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites (ACS) IEC 61439-4:2012 |
|
|
|
Cenelec |
EN 61439-5:2011 Low-voltage switchgear and controlgear assemblies — Part 5: Assemblies for power distribution in public networks IEC 61439-5:2010 |
|
|
|
Cenelec |
EN 61439-6:2012 Low-voltage switchgear and controlgear assemblies — Part 6: Busbar trunking systems (busways) IEC 61439-6:2012 |
|
|
|
Cenelec |
EN 61543:1995 Residual current-operated protective devices (RCDs) for household and similar use — Electromagnetic compatibility IEC 61543:1995 |
Relevant generic standard(s) Note 2.3 |
Date expired (4.7.1998) |
|
|
EN 61543:1995/AC:1997 |
|
|
|
|
EN 61543:1995/A11:2003/AC:2004 |
|
|
|
|
EN 61543:1995/A11:2003 IEC 61543:1995/A1:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 61543:1995/A12:2005 |
Note 3 |
Date expired (1.3.2008) |
|
|
EN 61543:1995/A2:2006 IEC 61543:1995/A2:2005 |
Note 3 |
Date expired (1.12.2008) |
|
Cenelec |
EN 61547:2009 Equipment for general lighting purposes — EMC immunity requirements IEC 61547:2009 IEC 61547:2009/IS1:2013 |
EN 61547:1995 |
Date expired (1.7.2012) |
|
Cenelec |
EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 12: Performance measuring and monitoring devices (PMD) IEC 61557-12:2007 |
|
|
|
Cenelec |
EN 61800-3:2004 Adjustable speed electrical power drive systems — Part 3: EMC requirements and specific test methods IEC 61800-3:2004 |
EN 61800-3:1996 + A11:2000 Note 2.1 |
Date expired (1.10.2007) |
|
|
EN 61800-3:2004/A1:2012 IEC 61800-3:2004/A1:2011 |
Note 3 |
Date expired (19.12.2014) |
|
Cenelec |
EN 61812-1:2011 Time relays for industrial and residential use — Part 1: Requirements and tests IEC 61812-1:2011 |
EN 61812-1:1996 Note 2.1 |
Date expired (29.6.2014) |
|
Cenelec |
EN 62020:1998 Electrical accessories — Residual current monitors for household and similar uses (RCMs) IEC 62020:1998 |
|
|
|
|
EN 62020:1998/A1:2005 IEC 62020:1998/A1:2003 (Modified) |
Note 3 |
Date expired (1.3.2008) |
|
Cenelec |
EN 62026-1:2007 Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 1: General rules IEC 62026-1:2007 |
Relevant generic standard(s) Note 2.1 |
Date expired (1.9.2010) |
|
EN 62026-1:2007 does not give presumption of conformity without another part of the standard. |
|||
|
Cenelec |
EN 62026-2:2013 Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 2: Actuator sensor interface (AS-i) IEC 62026-2:2008 (Modified) |
EN 50295:1999 Note 2.1 |
Date expired (3.12.2015) |
|
Cenelec |
EN 62026-3:2009 Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 3: DeviceNet IEC 62026-3:2008 |
Relevant generic standard(s) Note 2.1 |
Date expired (1.5.2012) |
|
Cenelec |
EN 62026-7:2013 Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 7: CompoNet IEC 62026-7:2010 (Modified) |
|
|
|
Cenelec |
EN 62040-2:2006 Uninterruptible power systems (UPS) — Part 2: Electromagnetic compatibility (EMC) requirements IEC 62 IEC 62040-2:2005 |
EN 50091-2:1995 Note 2.1 |
Date expired (1.10.2008) |
|
|
EN 62040-2:2006/AC:2006 |
|
|
|
Cenelec |
EN 62052-11:2003 Electricity metering equipment (AC) — General requirements, tests and test conditions — Part 11: Metering equipment IEC 62052-11:2003 |
Relevant generic standard(s) Note 2.3 |
Date expired (1.3.2006) |
|
EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series. |
|||
|
Cenelec |
EN 62052-21:2004 Electricity metering equipment (a.c.) — General requirements, tests and test conditions — Part 21: Tariff and load control equipment IEC 62052-21:2004 |
EN 61037:1992 + A1:1996 + A2:1998 + EN 61038:1992 + A1:1996 + A2:1998 Note 2.1 |
Date expired (1.7.2007) |
|
EN 62052-21:2004 does not give presumption of conformity without a part of the EN 62054 series. |
|||
|
Cenelec |
EN 62053-11:2003 Electricity metering equipment (a.c.) — Particular requirements — Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) IEC 62053-11:2003 |
EN 60521:1995 Note 2.1 |
Date expired (1.3.2006) |
|
Cenelec |
EN 62053-21:2003 Electricity metering equipment (a.c.) — Particular requirements — Part 21: Static meters for active energy (classes 1 and 2) IEC 62053-21:2003 |
EN 61036:1996 + A1:2000 Note 2.1 |
Date expired (1.3.2006) |
|
Cenelec |
EN 62053-22:2003 Electricity metering equipment (a.c.) — Particular requirements — Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) IEC 62053-22:2003 |
EN 60687:1992 Note 2.1 |
Date expired (1.3.2006) |
|
Cenelec |
EN 62053-23:2003 Electricity metering equipment (a.c.) — Particular requirements — Part 23: Static meters for reactive energy (classes 2 and 3) IEC 62053-23:2003 |
EN 61268:1996 Note 2.1 |
Date expired (1.3.2006) |
|
Cenelec |
EN 62054-11:2004 Electricity metering (a.c.) — Tariff and load control — Part 11: Particular requirements for electronic ripple control receivers IEC 62054-11:2004 |
EN 61037:1992 + A1:1996 + A2:1998 Note 2.1 |
Date expired (1.7.2007) |
|
Cenelec |
EN 62054-21:2004 Electricity metering (a.c.) — Tariff and load control — Part 21: Particular requirements for time switches IEC 62054-21:2004 |
EN 61038:1992 + A1:1996 + A2:1998 Note 2.1 |
Date expired (1.7.2007) |
|
Cenelec |
EN 62135-2:2008 Resistance welding equipment — Part 2: Electromagnetic compatibility (EMC) requirements IEC 62135-2:2007 |
EN 50240:2004 Note 2.1 |
Date expired (1.2.2011) |
|
Cenelec |
EN 62310-2:2007 Static transfer systems (STS) — Part 2: Electromagnetic compatibility (EMC) requirements IEC 62310-2:2006 (Modified) |
Relevant generic standard(s) Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 62423:2009 Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs) IEC 62423:2007 (Modified) |
|
|
|
Cenelec |
EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses IEC IEC 62423:2009 (Modified) |
EN 62423:2009 Note 2.1 |
Date expired (19.6.2017) |
|
Cenelec |
EN 62586-1:2014 Power quality measurement in power supply systems — Part 1: Power quality instruments (PQI) IEC 62586-1:2013 |
|
|
|
Cenelec |
EN 62586-2:2014 Power quality measurement in power supply systems — Part 2: Functional tests and uncertainty requirements IEC 62586-2:2013 |
|
|
|
Cenelec |
EN 62606:2013 General requirements for arc fault detection devices IEC IEC 62606:2013 (Modified) |
|
|
|
ETSI |
EN 300 386 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
EN 300 386 V1.3.3 Note 2.1 |
Date expired (31.7.2011) |
|
ETSI |
EN 300 386 V1.5.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
EN 300 386 V1.4.1 Note 2.1 |
Date expired (31.1.2014) |
|
ETSI |
EN 300 386 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
EN 300 386 V1.5.1 Note 2.1 |
Date expired (30.11.2015) |
|
ETSI |
EN 301 489-1 V1.9.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements |
EN 301 489-1 V1.8.1 Note 2.1 |
Date expired (30.6.2013) |
|
ETSI |
EN 301 489-34 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones |
|
|
|
ETSI |
EN 301 489-34 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones |
EN 301 489-34 V1.1.1 Note 2.1 |
Date expired (28.2.2014) |
|
ETSI |
EN 301 489-34 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones |
EN 301 489-34 V1.3.1 Note 2.1 |
Date expired (28.2.2015) |
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.