|
13.11.2015 |
EN |
Official Journal of the European Union |
C 378/6 |
Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2015/C 378/03)
The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards.
|
ESO (1) |
Reference and title of the standard (and reference document) |
Reference of superseded standard |
Date of applicability of the standard as a harmonised standard |
Date of the end of the co-existence period |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 1:1998 Flued oil stoves with vaporizing burners |
|
1.1.2008 |
1.1.2009 |
|
|
EN 1:1998/A1:2007 |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 40-4:2005 Lighting columns — Part 4: Requirements for reinforced and prestressed concrete lighting columns |
|
1.10.2006 |
1.10.2007 |
|
|
EN 40-4:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 40-5:2002 Lighting columns — Part 5: Requirements for steel lighting columns |
|
1.2.2003 |
1.2.2005 |
|
CEN |
EN 40-6:2002 Lighting columns — Part 6: Requirements for aluminium lighting columns |
|
1.2.2003 |
1.2.2005 |
|
CEN |
EN 40-7:2002 Lighting columns — Part 7: Requirements for fibre reinforced polymer composite lighting columns |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 54-2:1997 Fire detection and fire alarm systems — Part 2: Control and indicating equipment |
|
1.1.2008 |
1.8.2009 |
|
|
EN 54-2:1997/AC:1999 |
|
1.1.2008 |
1.1.2008 |
|
|
EN 54-2:1997/A1:2006 |
|
1.1.2008 |
1.8.2009 |
|
CEN |
EN 54-3:2001 Fire detection and fire alarm systems — Part 3: Fire alarm devices — Sounders |
|
1.4.2003 |
1.6.2009 |
|
|
EN 54-3:2001/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
|
EN 54-3:2001/A2:2006 |
|
1.3.2007 |
1.6.2009 |
|
CEN |
EN 54-4:1997 Fire detection and fire alarm systems — Part 4: Power supply equipment |
|
1.10.2003 |
1.8.2009 |
|
|
EN 54-4:1997/AC:1999 |
|
1.6.2005 |
1.6.2005 |
|
|
EN 54-4:1997/A1:2002 |
|
1.10.2003 |
1.8.2009 |
|
|
EN 54-4:1997/A2:2006 |
|
1.6.2007 |
1.8.2009 |
|
CEN |
EN 54-5:2000 Fire detection and fire alarm systems — Part 5: Heat detectors — Point detectors |
|
1.4.2003 |
30.6.2005 |
|
|
EN 54-5:2000/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
CEN |
EN 54-7:2000 Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization |
|
1.4.2003 |
1.8.2009 |
|
|
EN 54-7:2000/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
|
EN 54-7:2000/A2:2006 |
|
1.5.2007 |
1.8.2009 |
|
CEN |
EN 54-10:2002 Fire detection and fire alarm systems — Part 10: Flame detectors — Point detectors |
|
1.9.2006 |
1.9.2008 |
|
|
EN 54-10:2002/A1:2005 |
|
1.9.2006 |
1.9.2008 |
|
CEN |
EN 54-11:2001 Fire detection and fire alarm systems — Part 11: Manual call points |
|
1.9.2006 |
1.9.2008 |
|
|
EN 54-11:2001/A1:2005 |
|
1.9.2006 |
1.9.2008 |
|
CEN |
EN 54-12:2002 Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical light beam |
|
1.10.2003 |
31.12.2005 |
|
CEN |
EN 54-16:2008 Fire detection and fire alarm systems — Part 16: Voice alarm control and indicating equipment |
|
1.1.2009 |
1.4.2011 |
|
CEN |
EN 54-17:2005 Fire detection and fire alarm systems — Part 17: Short-circuit isolators |
|
1.10.2006 |
1.12.2008 |
|
|
EN 54-17:2005/AC:2007 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 54-18:2005 Fire detection and fire alarm systems — Part 18: Input/output devices |
|
1.10.2006 |
1.12.2008 |
|
|
EN 54-18:2005/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 54-20:2006 Fire detection and fire alarm systems — Part 20: Aspirating smoke detectors |
|
1.4.2007 |
1.7.2009 |
|
|
EN 54-20:2006/AC:2008 |
|
1.8.2009 |
1.8.2009 |
|
CEN |
EN 54-21:2006 Fire detection and fire alarm systems — Part 21: Alarm transmission and fault warning routing equipment |
|
1.3.2007 |
1.6.2009 |
|
CEN |
EN 54-23:2010 Fire detection and fire alarm systems — Part 23: Fire alarm devices — Visual alarm devices |
|
1.12.2010 |
31.12.2013 |
|
CEN |
EN 54-24:2008 Fire detection and fire alarm systems — Part 24: Components of voice alarm systems — Loudspeakers |
|
1.1.2009 |
1.4.2011 |
|
CEN |
EN 54-25:2008 Fire detection and fire alarm systems — Part 25: Components using radio links |
|
1.1.2009 |
1.4.2011 |
|
|
EN 54-25:2008/AC:2012 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 179:2008 Building hardware — Emergency exit devices operated by a lever handle or push pad, for use on escape routes — Requirements and test methods |
EN 179:1997 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 197-1:2011 Cement — Part 1: Composition, specifications and conformity criteria for common cements |
EN 197-1:2000 EN 197-4:2004 |
1.7.2012 |
1.7.2013 |
|
CEN |
EN 295-1:2013 Vitrified clay pipe systems for drains and sewers — Part 1: Requirements for pipes, fittings and joints |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-4:2013 Vitrified clay pipe systems for drains and sewers — Part 4: Requirements for adaptors, connectors and flexible couplings |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-5:2013 Vitrified clay pipe systems for drains and sewers — Part 5: Requirements for perforated pipes and fittings |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-6:2013 Vitrified clay pipes systems for drain and sewers — Part 6: Requirements for components of manholes and inspection chambers |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-7:2013 Vitrified clay pipe systems for drains and sewers — Part 7: Requirements for pipes and joints for pipe jacking |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 331:1998 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
|
1.9.2011 |
1.9.2012 |
|
|
EN 331:1998/A1:2010 |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 413-1:2011 Masonry cement — Part 1: Composition, specifications and conformity criteria |
EN 413-1:2004 |
1.2.2012 |
1.2.2013 |
|
CEN |
EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use — Part 1: Safety |
|
1.12.2009 |
1.12.2010 |
|
CEN |
EN 438-7:2005 High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
|
1.11.2005 |
1.11.2006 |
|
CEN |
EN 442-1:2014 Radiators and convectors — Part 1: Technical specifications and requirements |
EN 442-1:1995 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 450-1:2012 Fly ash for concrete — Part 1: Definition, specifications and conformity criteria |
EN 450-1:2005+A1:2007 |
1.5.2013 |
1.5.2014 |
|
CEN |
EN 459-1:2010 Building lime — Part 1: Definitions, specifications and conformity criteria |
EN 459-1:2001 |
1.6.2011 |
1.6.2012 |
|
CEN |
EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding — Product specifications |
EN 490:2004 |
1.8.2012 |
1.8.2012 |
|
CEN |
EN 492:2012 Fibre-cement slates and fittings — Product specification and test methods |
EN 492:2004 |
1.7.2013 |
1.7.2013 |
|
CEN |
EN 494:2012 Fibre-cement profiled sheets and fittings — Product specification and test methods |
EN 494:2004+A3:2007 |
1.8.2013 |
1.8.2013 |
|
CEN |
EN 516:2006 Prefabricated accessories for roofing — Installations for roof access — Walkways, treads and steps |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 517:2006 Prefabricated accessories for roofing — Roof safety hooks |
|
1.12.2006 |
1.12.2007 |
|
CEN |
EN 520:2004+A1:2009 Gypsum plasterboards — Definitions, requirements and test methods |
EN 520:2004 |
1.6.2010 |
1.12.2010 |
|
CEN |
EN 523:2003 Steel strip sheaths for prestressing tendons — Terminology, requirements, quality control |
|
1.6.2004 |
1.6.2005 |
|
CEN |
EN 534:2006+A1:2010 Corrugated bitumen sheets — Product specification and test methods |
EN 534:2006 |
1.1.2011 |
1.1.2011 |
|
CEN |
EN 544:2011 Bitumen shingles with mineral and/or synthetic reinforcements — Product specification and test methods |
EN 544:2005 |
1.4.2012 |
1.4.2012 |
|
CEN |
EN 572-9:2004 Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 588-2:2001 Fibre cement pipes for drains and sewers — Part 2: Manholes and inspection chambers |
|
1.10.2002 |
1.10.2003 |
|
CEN |
EN 598:2007+A1:2009 Ductile iron pipes, fittings, accessories and their joints for sewerage applications — Requirements and test methods |
EN 598:2007 |
1.4.2010 |
1.4.2011 |
|
CEN |
EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 671-1:2012 Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose |
EN 671-1:2001 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 671-2:2012 Fixed firefighting systems — Hose systems — Part 2: Hose systems with lay-flat hose |
EN 671-2:2001 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 681-1:1996 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber |
|
1.1.2003 |
1.1.2009 |
|
|
EN 681-1:1996/A3:2005 |
|
1.1.2008 |
1.1.2009 |
|
|
EN 681-1:1996/A1:1998 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-1:1996/A2:2002 |
|
1.1.2003 |
1.1.2004 |
|
CEN |
EN 681-2:2000 Elastomeric Seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-2:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-2:2000/A2:2005 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 681-3:2000 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 3: Cellular materials of vulcanized rubber |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-3:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-3:2000/A2:2005 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 681-4:2000 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 4: Cast polyurethane sealing elements |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-4:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-4:2000/A2:2005 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 682:2002 Elastomeric Seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
|
1.10.2002 |
1.12.2003 |
|
|
EN 682:2002/A1:2005 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 771-1:2011 Specification for masonry units — Part 1: Clay masonry units |
EN 771-1:2003 |
1.2.2012 |
1.2.2013 |
|
CEN |
EN 771-2:2011 Specification for masonry units — Part 2: Calcium silicate masonry units |
EN 771-2:2003 |
1.2.2012 |
1.2.2013 |
|
CEN |
EN 771-3:2011 Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) |
EN 771-3:2003 |
1.2.2012 |
1.2.2013 |
|
CEN |
EN 771-4:2011 Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units |
EN 771-4:2003 |
1.2.2012 |
1.2.2013 |
|
CEN |
EN 771-5:2011 Specification for masonry units — Part 5: Manufactured stone masonry units |
EN 771-5:2003 |
1.2.2012 |
1.2.2013 |
|
CEN |
EN 771-6:2011 Specification for masonry units — Part 6: Natural stone masonry units |
EN 771-6:2005 |
1.2.2012 |
1.2.2013 |
|
CEN |
EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 1: System D — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 2: System E — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use — Part 3: System F — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 4: System H — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 845-1:2013 Specification for ancillary components for masonry — Part 1: Wall ties, tension straps, hangers and brackets |
EN 845-1:2003+A1:2008 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 845-2:2013 Specification for ancillary components for masonry — Part 2: Lintels |
EN 845-2:2003 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 845-3:2013 Specification for ancillary components for masonry — Part 3: Bed joint reinforcement of steel meshwork |
EN 845-3:2003+A1:2008 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) — Part 1: Principles of product design, performance and testing, marking and quality control |
|
1.9.2005 |
1.9.2006 |
|
|
EN 858-1:2002/A1:2004 |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 877:1999 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings — Requirements, test methods and quality assurance |
|
1.1.2008 |
1.9.2009 |
|
|
EN 877:1999/A1:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
|
EN 877:1999/A1:2006 |
|
1.1.2008 |
1.9.2009 |
|
CEN |
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and labelling |
EN 934-2:2009 |
1.3.2013 |
1.9.2013 |
|
CEN |
EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout — Part 3: Admixtures for masonry mortar — Definitions, requirements, conformity and marking and labelling |
EN 934-3:2009 |
1.3.2013 |
1.9.2013 |
|
CEN |
EN 934-4:2009 Admixtures for concrete, mortar and grout — Part 4: Admixtures for grout for prestressing tendons — Definitions, requirements, conformity, marking and labelling |
EN 934-4:2001 |
1.3.2010 |
1.3.2011 |
|
CEN |
EN 934-5:2007 Admixtures for concrete, mortar and grout — Part 5: Admixtures for sprayed concrete — Definitions, requirements, conformity, marking and labelling |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines — Requirements and test methods |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 997:2012 WC pans and WC suites with integral trap |
EN 997:2003 |
1.12.2012 |
1.6.2013 |
|
|
EN 997:2012/AC:2012 |
|
1.3.2013 |
1.3.2013 |
|
CEN |
EN 998-1:2010 Specification for mortar for masonry — Part 1: Rendering and plastering mortar |
EN 998-1:2003 |
1.6.2011 |
1.6.2012 |
|
CEN |
EN 998-2:2010 Specification for mortar for masonry — Part 2: Masonry mortar |
EN 998-2:2003 |
1.6.2011 |
1.6.2012 |
|
CEN |
EN 1013:2012+A1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings — Requirements and test methods |
EN 1013:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 1036-2:2008 Glass in building — Mirrors from silver-coated float glass for internal use — Part 2: Evaluation of conformity; product standard |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1051-2:2007 Glass in building — Glass blocks and glass pavers — Part 2: Evaluation of conformity/Product standard |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1057:2006+A1:2010 Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN 1057:2006 |
1.12.2010 |
1.12.2010 |
|
CEN |
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures — Part 1: Requirements for conformity assessment of structural components |
EN 1090-1:2009 |
1.9.2012 |
1.7.2014 |
|
CEN |
EN 1096-4:2004 Glass in building — Coated glass — Part 4: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1123-1:1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control |
|
1.6.2005 |
1.6.2006 |
|
|
EN 1123-1:1999/A1:2004 |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 1124-1:1999 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control |
|
1.6.2005 |
1.6.2006 |
|
|
EN 1124-1:1999/A1:2004 |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 1125:2008 Building hardware — Panic exit devices operated by a horizontal bar, for use on escape routes — Requirements and test methods |
EN 1125:1997 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1154:1996 Building hardware — Controlled door closing devices — Requirements and test methods |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1154:1996/A1:2002/AC:2006 |
|
1.1.2010 |
1.1.2010 |
|
|
EN 1154:1996/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 1155:1997 Building hardware — Electrically powered hold-open devices for swing doors — Requirements and test methods |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1155:1997/A1:2002/AC:2006 |
|
1.1.2010 |
1.1.2010 |
|
|
EN 1155:1997/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 1158:1997 Building hardware — Door coordinator devices — Requirements and test methods |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1158:1997/A1:2002/AC:2006 |
|
1.6.2006 |
1.6.2006 |
|
|
EN 1158:1997/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 1168:2005+A3:2011 Precast concrete products — Hollow core slabs |
EN 1168:2005+A2:2009 |
1.7.2012 |
1.7.2013 |
|
CEN |
EN 1279-5:2005+A2:2010 Glass in building — Insulating glass units — Part 5: Evaluation of conformity |
EN 1279-5:2005+A1:2008 |
1.2.2011 |
1.2.2012 |
|
CEN |
EN 1304:2005 Clay roofing tiles and fittings — Product definitions and specifications |
|
1.2.2006 |
1.2.2007 |
|
CEN |
EN 1317-5:2007+A2:2012 Road restraint systems — Part 5: Product requirements and evaluation of conformity for vehicle restraint systems |
EN 1317-5:2007+A1:2008 |
1.1.2013 |
1.1.2013 |
|
|
EN 1317-5:2007+A2:2012/AC:2012 |
|
1.3.2013 |
1.3.2013 |
|
CEN |
EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
|
1.10.2010 |
1.10.2011 |
|
CEN |
EN 1337-3:2005 Structural bearings — Part 3: Elastomeric bearings |
|
1.1.2006 |
1.1.2007 |
|
CEN |
EN 1337-4:2004 Structural bearings — Part 4: Roller bearings |
|
1.2.2005 |
1.2.2006 |
|
|
EN 1337-4:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 1337-5:2005 Structural bearings — Part 5: Pot bearings |
|
1.1.2006 |
1.1.2007 |
|
CEN |
EN 1337-6:2004 Structural bearings — Part 6: Rocker bearings |
|
1.2.2005 |
1.2.2006 |
|
CEN |
EN 1337-7:2004 Structural bearings — Part 7: Spherical and cylindrical PTFE bearings |
EN 1337-7:2000 |
1.12.2004 |
1.6.2005 |
|
CEN |
EN 1337-8:2007 Structural bearings — Part 8: Guide Bearings and Restraint Bearings |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1338:2003 Concrete paving blocks — Requirements and test methods |
|
1.3.2004 |
1.3.2005 |
|
|
EN 1338:2003/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1339:2003 Concrete paving flags — Requirements and test methods |
|
1.3.2004 |
1.3.2005 |
|
|
EN 1339:2003/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1340:2003 Concrete kerb units — Requirements and test methods |
|
1.2.2004 |
1.2.2005 |
|
|
EN 1340:2003/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1341:2012 Slabs of natural stone for external paving — Requirements and test methods |
EN 1341:2001 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 1342:2012 Setts of natural stone for external paving — Requirements and test methods |
EN 1342:2001 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 1343:2012 Kerbs of natural stone for external paving — Requirements and test methods |
EN 1343:2001 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 1344:2013 Clay pavers — Requirements and test methods |
EN 1344:2002 |
8.8.2014 |
8.8.2016 |
|
|
EN 1344:2013/AC:2015 |
|
|
|
|
CEN |
EN 1423:2012 Road marking materials — Drop on materials — Glass beads, antiskid aggregates and mixtures of the two |
EN 1423:1997 |
1.11.2012 |
1.11.2012 |
|
|
EN 1423:2012/AC:2013 |
|
1.7.2013 |
1.7.2013 |
|
CEN |
EN 1433:2002 Drainage channels for vehicular and pedestrian areas — Classification, design and testing requirements, marking and evaluation of conformity |
|
1.8.2003 |
1.8.2004 |
|
|
EN 1433:2002/A1:2005 |
|
1.1.2006 |
1.1.2006 |
|
CEN |
EN 1457-1:2012 Chimneys — Clay/ceramic flue liners — Part 1: Flue liners operating under dry conditions — Requirements and test methods |
EN 1457:1999 |
1.11.2012 |
1.11.2013 |
|
CEN |
EN 1457-2:2012 Chimneys — Clay/ceramic flue liners — Part 2: Flue liners operating under wet conditions — Requirements and test methods |
EN 1457:1999 |
1.11.2012 |
1.11.2013 |
|
CEN |
EN 1463-1:2009 Road marking materials — Retroreflecting road studs — Part 1: Initial performance requirements |
EN 1463-1:1997 |
1.1.2010 |
1.1.2011 |
|
CEN |
EN 1469:2004 Natural stone products — Slabs for cladding — Requirements |
|
1.7.2005 |
1.7.2006 |
|
CEN |
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 2: Surface protection systems for concrete |
|
1.9.2005 |
1.1.2009 |
|
CEN |
EN 1504-3:2005 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 3: Structural and non-structural repair |
|
1.10.2006 |
1.1.2009 |
|
CEN |
EN 1504-4:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 4: Structural bonding |
|
1.9.2005 |
1.1.2009 |
|
CEN |
EN 1504-5:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 5: Concrete injection |
|
1.10.2005 |
1.1.2009 |
|
CEN |
EN 1504-6:2006 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 6: Anchoring of reinforcing steel bar |
|
1.6.2007 |
1.1.2009 |
|
CEN |
EN 1504-7:2006 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 7: Reinforcement corrosion protection |
|
1.6.2007 |
1.1.2009 |
|
CEN |
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
EN 1520:2002 |
1.1.2012 |
1.1.2013 |
|
CEN |
EN 1748-1-2:2004 Glass in building — Special basic products — Borosilicate glasses — Part 1-2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1748-2-2:2004 Glass in building — Special basic products — Glass ceramics — Part 2-2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1806:2006 Chimneys — Clay/ceramic flue blocks for single wall chimneys — Requirements and test methods |
|
1.5.2007 |
1.5.2008 |
|
CEN |
EN 1825-1:2004 Grease separators — Part 1: Principles of design, performance and testing, marking and quality control |
|
1.9.2005 |
1.9.2006 |
|
|
EN 1825-1:2004/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1856-1:2009 Chimneys — Requirements for metal chimneys — Part 1: System chimney products |
EN 1856-1:2003 |
1.3.2010 |
1.3.2011 |
|
CEN |
EN 1856-2:2009 Chimneys — Requirements for metal chimneys — Part 2: Metal flue liners and connecting flue pipes |
EN 1856-2:2004 |
1.3.2010 |
1.3.2011 |
|
CEN |
EN 1857:2010 Chimneys — Components — Concrete flue liners |
EN 1857:2003+A1:2008 |
1.1.2011 |
1.1.2012 |
|
CEN |
EN 1858:2008+A1:2011 Chimneys — Components — Concrete flue blocks |
EN 1858:2008 |
1.4.2012 |
1.4.2013 |
|
CEN |
EN 1863-2:2004 Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1873:2005 Prefabricated accessories for roofing — Individual roof lights of plastics — Product specification and test methods |
|
1.10.2006 |
1.10.2009 |
|
CEN |
EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
|
1.8.2003 |
23.11.2004 |
|
|
EN 1916:2002/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
|
1.8.2003 |
23.11.2004 |
|
|
EN 1917:2002/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 1935:2002 Building hardware — Single-axis hinges — Requirements and test methods |
|
1.10.2002 |
1.12.2003 |
|
|
EN 1935:2002/AC:2003 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 10025-1:2004 Hot rolled products of structural steels — Part 1: General technical delivery conditions |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 10088-4:2009 Stainless steels — Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
|
1.2.2010 |
1.2.2011 |
|
CEN |
EN 10088-5:2009 Stainless steels — Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions |
|
1.4.2006 |
1.4.2007 |
|
|
EN 10224:2002/A1:2005 |
|
1.4.2006 |
1.4.2007 |
|
CEN |
EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading — Technical delivery conditions |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 10311:2005 Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions |
|
1.4.2006 |
1.4.2007 |
|
|
EN 10312:2002/A1:2005 |
|
1.4.2006 |
1.4.2007 |
|
CEN |
EN 10340:2007 Steel castings for structural uses |
|
1.1.2010 |
1.1.2011 |
|
|
EN 10340:2007/AC:2008 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 10343:2009 Steels for quenching and tempering for construction purposes — Technical delivery conditions |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 12004:2007+A1:2012 Adhesives for tiles — Requirements, evaluation of conformity, classification and designation |
EN 12004:2007 |
1.4.2013 |
1.7.2013 |
|
CEN |
EN 12050-1:2001 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 1: Lifting plants for wastewater containing faecal matter |
|
1.11.2001 |
1.11.2002 |
|
CEN |
EN 12050-2:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 2: Lifting plants for faecal-free wastewater |
|
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12050-3:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 3: Lifting plants for wastewater containing faecal matter for limited applications |
|
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12050-4:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
|
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12057:2004 Natural stone products — Modular tiles — Requirements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12058:2004 Natural stone products — Slabs for floors and stairs — Requirements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12094-1:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 1: Requirements and test methods for electrical automatic control and delay devices |
|
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-2:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
|
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-3:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 3: Requirements and test methods for manual triggering and stop devices |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-4:2004 Fixed firefighting systems — Components for gas extinguishing systems — Part 4: Requirements and test methods for container valve assemblies and their actuators |
|
1.5.2005 |
1.8.2007 |
|
CEN |
EN 12094-5:2006 Fixed firefighting systems — Components for gas extinguishing systems — Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
EN 12094-5:2000 |
1.2.2007 |
1.5.2009 |
|
CEN |
EN 12094-6:2006 Fixed firefighting systems — Components for gas extinguishing systems — Part 6: Requirements and test methods for non-electrical disable devices |
EN 12094-6:2000 |
1.2.2007 |
1.5.2009 |
|
CEN |
EN 12094-7:2000 Fixed firefighting systems — Components for gas extinguishing systems — Part 7: Requirements and test methods for nozzles for CO2 systems |
|
1.10.2001 |
1.4.2004 |
|
|
EN 12094-7:2000/A1:2005 |
|
1.11.2005 |
1.11.2006 |
|
CEN |
EN 12094-8:2006 Fixed firefighting systems — Components for gas extinguishing systems — Part 8: Requirements and test methods for connectors |
|
1.2.2007 |
1.5.2009 |
|
CEN |
EN 12094-9:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 9: Requirements and test methods for special fire detectors |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-10:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 10: Requirements and test methods for pressure gauges and pressure switches |
|
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-11:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 11: Requirements and test methods for mechanical weighing devices |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-12:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 12: Requirements and test methods for pneumatic alarm devices |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-13:2001 Fixed firefighting systems — Components for gas extinguishing systems — Part 13: Requirements and test methods for check valves and non-return valves |
|
1.1.2002 |
1.4.2004 |
|
|
EN 12094-13:2001/AC:2002 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 12101-1:2005 Smoke and heat control systems — Part 1: Specification for smoke barriers |
|
1.6.2006 |
1.9.2008 |
|
|
EN 12101-1:2005/A1:2006 |
|
1.12.2006 |
1.9.2008 |
|
CEN |
EN 12101-2:2003 Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators |
|
1.4.2004 |
1.9.2006 |
|
CEN |
EN 12101-3:2002 Smoke and heat control systems — Part 3: Specification for powered smoke and heat exhaust ventilators |
|
1.4.2004 |
1.4.2005 |
|
|
EN 12101-3:2002/AC:2005 |
|
1.1.2006 |
1.1.2006 |
|
CEN |
EN 12101-6:2005 Smoke and heat control systems — Part 6: Specification for pressure differential systems — Kits |
|
1.4.2006 |
1.4.2007 |
|
|
EN 12101-6:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 12101-7:2011 Smoke and heat control systems — Part 7: Smoke duct sections |
|
1.2.2012 |
1.2.2013 |
|
CEN |
EN 12101-8:2011 Smoke and heat control systems — Part 8: Smoke control dampers |
|
1.2.2012 |
1.2.2013 |
|
CEN |
EN 12101-10:2005 Smoke and heat control systems — Part 10: Power supplies |
|
1.10.2006 |
1.5.2012 |
|
|
EN 12101-10:2005/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 12150-2:2004 Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12209:2003 Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods |
|
1.12.2004 |
1.6.2006 |
|
|
EN 12209:2003/AC:2005 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 12259-1:1999 + A1:2001 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers |
|
1.4.2002 |
1.9.2005 |
|
|
EN 12259-1:1999 + A1:2001/A3:2006 |
|
1.11.2006 |
1.11.2007 |
|
|
EN 12259-1:1999 + A1:2001/A2:2004 |
|
1.3.2005 |
1.3.2006 |
|
CEN |
EN 12259-2:1999 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 2: Wet alarm valve assemblies |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-2:1999/AC:2002 |
|
1.6.2005 |
1.6.2005 |
|
|
EN 12259-2:1999/A1:2001 |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-2:1999/A2:2005 |
|
1.9.2006 |
1.8.2007 |
|
CEN |
EN 12259-3:2000 Fixed firefighting systems — Components for automatic sprinkler and water spray systems — Part 3: Dry alarm valve assemblies |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-3:2000/A1:2001 |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-3:2000/A2:2005 |
|
1.9.2006 |
1.8.2007 |
|
CEN |
EN 12259-4:2000 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 4: Water motor alarms |
|
1.1.2002 |
1.4.2004 |
|
|
EN 12259-4:2000/A1:2001 |
|
1.1.2002 |
1.4.2004 |
|
CEN |
EN 12259-5:2002 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 5: Water flow detectors |
|
1.7.2003 |
1.9.2005 |
|
CEN |
EN 12271:2006 Surface dressing — Requirements |
|
1.1.2008 |
1.1.2011 |
|
CEN |
EN 12273:2008 Slurry surfacing — Requirements |
|
1.1.2009 |
1.1.2011 |
|
CEN |
EN 12285-2:2005 Workshop fabricated steel tanks — Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
|
1.1.2006 |
1.1.2008 |
|
CEN |
EN 12326-1:2014 Slate and stone for discontinuous roofing and external cladding — Part 1: Specifications for slate and carbonate slate |
EN 12326-1:2004 |
13.2.2015 |
13.2.2016 |
|
CEN |
EN 12337-2:2004 Glass in building — Chemically strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12352:2006 Traffic control equipment — Warning and safety light devices |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 12368:2006 Traffic control equipment — Signal heads |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 12380:2002 Air admittance valves for drainage systems — Requirements, tests methods and evaluation of conformity |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 12446:2011 Chimneys — Components — Concrete outer wall elements |
EN 12446:2003 |
1.4.2012 |
1.4.2013 |
|
CEN |
EN 12467:2012 Fibre-cement flat sheets — Product specification and test methods |
EN 12467:2004 |
1.7.2013 |
1.7.2013 |
|
CEN |
EN 12566-1:2000 Small wastewater treatment systems for up to 50 PT — Part 1: Prefabricated septic tanks |
|
1.12.2004 |
1.12.2005 |
|
|
EN 12566-1:2000/A1:2003 |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 12566-3:2005+A2:2013 Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
EN 12566-3:2005+A1:2009 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 12566-4:2007 Small wastewater treatment systems for up to 50 PT — Part 4: Septic tanks assembled in situ from prefabricated kits |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12566-6:2013 Small wastewater treatment systems for up to 50 PT — Part 6: Prefabricated treatment units for septic tank effluent |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 12566-7:2013 Small wastewater treatment systems for up to 50 PT — Part 7: Prefabricated tertiary treatment units |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 12591:2009 Bitumen and bituminous binders — Specifications for paving grade bitumens |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 12602:2008+A1:2013 Prefabricated reinforced components of autoclaved aerated concrete |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 12620:2002+A1:2008 Aggregates for concrete |
EN 12620:2002 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12676-1:2000 Anti-glare systems for roads — Part 1: Performance and characteristics |
|
1.2.2004 |
1.2.2006 |
|
|
EN 12676-1:2000/A1:2003 |
|
1.2.2004 |
1.2.2006 |
|
CEN |
EN 12737:2004+A1:2007 Precast concrete products — Floor slats for livestock |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12764:2004+A1:2008 Sanitary appliances — Specification for whirlpool baths |
EN 12764:2004 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12794:2005+A1:2007 Precast concrete products — Foundation piles |
EN 12794:2005 |
1.2.2008 |
1.2.2009 |
|
|
EN 12794:2005+A1:2007/AC:2008 |
|
1.8.2009 |
1.8.2009 |
|
CEN |
EN 12809:2001 Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 12809:2001/AC:2006 |
|
1.1.2008 |
1.1.2008 |
|
|
EN 12809:2001/A1:2004 |
|
1.7.2005 |
1.7.2007 |
|
|
EN 12809:2001/A1:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 12815:2001 Residential cookers fired by solid fuel — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 12815:2001/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
|
EN 12815:2001/A1:2004 |
|
1.7.2005 |
1.7.2007 |
|
|
EN 12815:2001/A1:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 12839:2012 Precast concrete products — Elements for fences |
EN 12839:2001 |
1.10.2012 |
1.10.2013 |
|
CEN |
EN 12843:2004 Precast concrete products — Masts and poles |
|
1.9.2005 |
1.9.2007 |
|
CEN |
EN 12859:2011 Gypsum blocks — Definitions, requirements and test methods |
EN 12859:2008 |
1.12.2011 |
1.12.2012 |
|
CEN |
EN 12860:2001 Gypsum based adhesives for gypsum blocks — Definitions, requirements and test methods |
|
1.4.2002 |
1.4.2003 |
|
|
EN 12860:2001/AC:2002 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 12878:2005 Pigments for the colouring of building materials based on cement and/or lime — Specifications and methods of test |
|
1.3.2006 |
1.3.2007 |
|
|
EN 12878:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 12899-1:2007 Fixed, vertical road traffic signs — Part 1: Fixed signs |
|
1.1.2009 |
1.1.2013 |
|
CEN |
EN 12899-2:2007 Fixed, vertical road traffic signs — Part 2: Transilluminated traffic bollards (TTB) |
|
1.1.2009 |
1.1.2013 |
|
CEN |
EN 12899-3:2007 Fixed, vertical road traffic signs — Part 3: Delineator posts and retroreflectors |
|
1.1.2009 |
1.1.2013 |
|
CEN |
EN 12951:2004 Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12966-1:2005+A1:2009 Road vertical signs — Variable message traffic signs — Part 1: Product standard |
|
1.8.2010 |
1.8.2010 |
|
CEN |
EN 13024-2:2004 Glass in building — Thermally toughened borosilicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13043:2002 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
|
1.7.2003 |
1.6.2004 |
|
|
EN 13043:2002/AC:2004 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13055-1:2002 Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout |
|
1.3.2003 |
1.6.2004 |
|
|
EN 13055-1:2002/AC:2004 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 13055-2:2004 Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
|
1.5.2005 |
1.5.2006 |
|
CEN |
EN 13063-1:2005+A1:2007 Chimneys — System chimneys with clay/ceramic flue liners — Part 1: Requirements and test methods for sootfire resistance |
EN 13063-1:2005 |
1.5.2008 |
1.5.2009 |
|
CEN |
EN 13063-2:2005+A1:2007 Chimneys — System chimneys with clay/ceramic flue liners — Part 2: Requirements and test methods under wet conditions |
EN 13063-2:2005 |
1.5.2008 |
1.5.2009 |
|
CEN |
EN 13063-3:2007 Chimneys — System chimneys with clay/ceramic flue liners — Part 3: Requirements and test methods for air flue system chimneys |
|
1.5.2008 |
1.5.2009 |
|
CEN |
EN 13069:2005 Chimneys — Clay/ceramic outer walls for system chimneys — Requirements and test methods |
|
1.5.2006 |
1.5.2007 |
|
CEN |
EN 13084-5:2005 Free-standing chimneys — Part 5: Material for brick liners — Product specifications |
|
1.4.2006 |
1.4.2007 |
|
|
EN 13084-5:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 13084-7:2012 Free-standing chimneys — Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
EN 13084-7:2005 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 13101:2002 Steps for underground man entry chambers — Requirements, marking, testing and evaluation of conformity |
|
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13108-1:2006 Bituminous mixtures — Material specifications — Part 1: Asphalt Concrete |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-1:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-2:2006 Bituminous mixtures — Material specifications — Part 2: Asphalt Concrete for very thin layers |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-2:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-3:2006 Bituminous mixtures — Material specifications — Part 3: Soft Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-3:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-4:2006 Bituminous mixtures — Material specifications — Part 4: Hot Rolled Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-4:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-5:2006 Bituminous mixtures — Material specifications — Part 5: Stone Mastic Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-5:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-6:2006 Bituminous mixtures — Material specifications — Part 6: Mastic Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-6:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-7:2006 Bituminous mixtures — Material specifications — Part 7: Porous Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-7:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13139:2002 Aggregates for mortar |
|
1.3.2003 |
1.6.2004 |
|
|
EN 13139:2002/AC:2004 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 13160-1:2003 Leak detection systems — Part 1: General principles |
|
1.3.2004 |
1.3.2005 |
|
CEN |
EN 13162:2012+A1:2015 Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification |
EN 13162:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13163:2012+A1:2015 Thermal insulation products for buildings — Factory made expanded polystyrene (EPS) products — Specification |
EN 13163:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13164:2012+A1:2015 Thermal insulation products for buildings — Factory made extruded polystyrene foam (XPS) products — Specification |
EN 13164:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13165:2012+A1:2015 Thermal insulation products for buildings — Factory made rigid polyurethane foam (PU) products — Specification |
EN 13165:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13166:2012+A1:2015 Thermal insulation products for buildings — Factory made phenolic foam (PF) products — Specification |
EN 13166:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13167:2012+A1:2015 Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification |
EN 13167:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13168:2012+A1:2015 Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification |
EN 13168:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13169:2012+A1:2015 Thermal insulation products for buildings — Factory made expanded perlite board (EPB) products — Specification |
EN 13169:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13170:2012+A1:2015 Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification |
EN 13170:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13171:2012+A1:2015 Thermal insulation products for buildings — Factory made wood fibre (WF) products — Specification |
EN 13171:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13224:2011 Precast concrete products — Ribbed floor elements |
EN 13224:2004+A1:2007 |
1.8.2012 |
1.8.2013 |
|
CEN |
EN 13225:2013 Precast concrete products — Linear structural elements |
EN 13225:2004 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 13229:2001 Inset appliances including open fires fired by solid fuels — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13229:2001/AC:2006 |
|
1.7.2007 |
1.7.2007 |
|
|
EN 13229:2001/A1:2003 |
|
1.6.2006 |
1.6.2007 |
|
|
EN 13229:2001/A2:2004 |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13229:2001/A2:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 13240:2001 Roomheaters fired by solid fuel — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13240:2001/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
|
EN 13240:2001/A2:2004 |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13240:2001/A2:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates — Product standard — Part 1: Products without fire resistance or smoke control characteristics |
EN 13241-1:2003 |
1.1.2012 |
1.1.2013 |
|
CEN |
EN 13242:2002+A1:2007 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
EN 13242:2002 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 13245-2:2008 Plastics — Unplasticized polyvinyl chloride (PVC-U) profiles for building applications — Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes |
|
1.7.2010 |
1.7.2012 |
|
|
EN 13245-2:2008/AC:2009 |
|
1.7.2010 |
1.7.2010 |
|
CEN |
EN 13249:2000 Geotextiles and geotextile-related products — Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
|
1.10.2001 |
1.10.2002 |
|
|
EN 13249:2000/A1:2005 |
|
1.11.2005 |
1.11.2006 |
|
CEN |
EN 13250:2000 Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways |
|
1.10.2001 |
1.10.2002 |
|
|
EN 13250:2000/A1:2005 |
|
1.6.2006 |
1.6.2007 |
|
CEN |
EN 13251:2000 Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures |
|
1.10.2001 |
1.10.2002 |
|
|
EN 13251:2000/A1:2005 |
|
1.6.2006 |
1.6.2007 |
|
CEN |
EN 13252:2000 Geotextiles and geotextile-related products — Characteristics required for use in drainage systems |
|
1.10.2001 |
1.10.2002 |
|
|
EN 13252:2000/A1:2005 |
|
1.6.2006 |
1.6.2007 |
|
CEN |
EN 13253:2000 Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments) |
|
1.10.2001 |
1.10.2002 |
|
|
EN 13253:2000/A1:2005 |
|
1.6.2006 |
1.6.2007 |
|
CEN |
EN 13254:2000 Geotextiles and geotextile-related products — Characteristics required for use in the construction of reservoirs and dams |
|
1.10.2001 |
1.10.2002 |
|
|
EN 13254:2000/A1:2005 |
|
1.6.2006 |
1.6.2007 |
|
|
EN 13254:2000/AC:2003 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13255:2000 Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals |
|
1.10.2001 |
1.10.2002 |
|
|
EN 13255:2000/A1:2005 |
|
1.6.2006 |
1.6.2007 |
|
|
EN 13255:2000/AC:2003 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13256:2000 Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures |
|
1.10.2001 |
1.10.2002 |
|
|
EN 13256:2000/A1:2005 |
|
1.6.2006 |
1.6.2007 |
|
|
EN 13256:2000/AC:2003 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13257:2000 Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals |
|
1.10.2001 |
1.10.2002 |
|
|
EN 13257:2000/A1:2005 |
|
1.6.2006 |
1.6.2007 |
|
|
EN 13257:2000/AC:2003 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13263-1:2005+A1:2009 Silica fume for concrete — Part 1: Definitions, requirements and conformity criteria |
EN 13263-1:2005 |
1.1.2010 |
1.1.2011 |
|
CEN |
EN 13265:2000 Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects |
|
1.10.2001 |
1.10.2002 |
|
|
EN 13265:2000/A1:2005 |
|
1.6.2006 |
1.6.2007 |
|
|
EN 13265:2000/AC:2003 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13279-1:2008 Gypsum binders and gypsum plasters — Part 1: Definitions and requirements |
EN 13279-1:2005 |
1.10.2009 |
1.10.2010 |
|
CEN |
EN 13282-1:2013 Hydraulic road binders — Part 1: Rapid hardening hydraulic road binders — Composition, specifications and conformity criteria |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 13310:2003 Kitchen sinks — Functional requirements and test methods |
|
1.2.2004 |
1.2.2006 |
|
CEN |
EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels — Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 — Requirements and test methods |
EN 13341:2005 |
1.10.2011 |
1.10.2011 |
|
CEN |
EN 13361:2004 Geosynthetic barriers — Characteristics required for use in the construction of reservoirs and dams |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13361:2004/A1:2006 |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13362:2005 Geosynthetic Barriers — Characteristics required for use in the construction of canals |
|
1.2.2006 |
1.2.2007 |
|
CEN |
EN 13383-1:2002 Armourstone — Part 1: Specification |
|
1.3.2003 |
1.6.2004 |
|
|
EN 13383-1:2002/AC:2004 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 13407:2006 Wall-hung urinals — Functional requirements and test methods |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 13450:2002 Aggregates for railway ballast |
|
1.10.2003 |
1.6.2004 |
|
|
EN 13450:2002/AC:2004 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 13454-1:2004 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate — Part 1: Definitions and requirements |
|
1.7.2005 |
1.7.2006 |
|
CEN |
EN 13479:2004 Welding consumables — General product standard for filler metals and fluxes for fusion welding of metallic materials |
|
1.10.2005 |
1.10.2006 |
|
CEN |
EN 13491:2004 Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13491:2004/A1:2006 |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13492:2004 Geosynthetic barriers — Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13492:2004/A1:2006 |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13493:2005 Geosynthetic barriers — Characteristics required for use in the construction of solid waste storage and disposal sites |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 13502:2002 Chimneys — Requirements and test methods for clay/ceramic flue terminals |
|
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13561:2004+A1:2008 External blinds — Performance requirements including safety |
EN 13561:2004 |
1.8.2009 |
1.8.2010 |
|
CEN |
EN 13564-1:2002 Anti-flooding devices for buildings — Part 1: Requirements |
|
1.5.2003 |
1.5.2004 |
|
CEN |
EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels |
|
1.5.2005 |
1.5.2006 |
|
|
EN 13616:2004/AC:2006 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13658-1:2005 Metal lath and beads — Definitions, requirements and test methods — Part 1: Internal plastering |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 13658-2:2005 Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 13659:2004+A1:2008 Shutters — Performance requirements including safety |
EN 13659:2004 |
1.8.2009 |
1.8.2010 |
|
CEN |
EN 13693:2004+A1:2009 Precast concrete products — Special roof elements |
EN 13693:2004 |
1.5.2010 |
1.5.2011 |
|
CEN |
EN 13707:2004+A2:2009 Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics |
|
1.4.2010 |
1.10.2010 |
|
CEN |
EN 13747:2005+A2:2010 Precast concrete products — Floor plates for floor systems |
EN 13747:2005+A1:2008 |
1.1.2011 |
1.1.2011 |
|
CEN |
EN 13748-1:2004 Terrazzo tiles — Part 1: Terrazzo tiles for internal use |
|
1.6.2005 |
1.10.2006 |
|
|
EN 13748-1:2004/AC:2005 |
|
1.6.2005 |
1.6.2005 |
|
|
EN 13748-1:2004/A1:2005 |
|
1.4.2006 |
1.10.2006 |
|
CEN |
EN 13748-2:2004 Terrazzo tiles — Part 2: Terrazzo tiles for external use |
|
1.4.2005 |
1.4.2006 |
|
CEN |
EN 13808:2013 Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions |
EN 13808:2005 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 13813:2002 Screed material and floor screeds — Screed material — Properties and requirements |
|
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13815:2006 Fibrous gypsum plaster casts — Definitions, requirements and test methods |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13830:2003 Curtain walling — Product standard |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 13859-1:2010 Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 1: Underlays for discontinuous roofing |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 13859-2:2010 Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 2: Underlays for walls |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 13877-3:2004 Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13915:2007 Prefabricated gypsum plasterboard panels with a cellular paperboard core — Definitions, requirements and test methods |
|
1.6.2008 |
1.6.2009 |
|
CEN |
EN 13924:2006 Bitumen and bituminous binders — Specifications for hard paving grade bitumens |
|
1.1.2010 |
1.1.2011 |
|
|
EN 13924:2006/AC:2006 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels — Definitions, requirements and test methods |
EN 13950:2005 |
13.2.2015 |
13.2.2016 |
|
CEN |
EN 13956:2012 Flexible sheets for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics |
EN 13956:2005 |
1.10.2013 |
1.10.2013 |
|
CEN |
EN 13963:2005 Jointing materials for gypsum plasterboards — Definitions, requirements and test methods |
|
1.3.2006 |
1.3.2007 |
|
|
EN 13963:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 13964:2004 Suspended ceilings — Requirements and test methods |
|
1.1.2005 |
1.7.2007 |
|
|
EN 13964:2004/A1:2006 |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 13967:2012 Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and characteristics |
EN 13967:2004 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 13969:2004 Flexible sheets for waterproofing — Bitumen damp proof sheets including bitumen basement tanking sheets — Definitions and characteristics |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13969:2004/A1:2006 |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 13970:2004 Flexible sheets for waterproofing — Bitumen water vapour control layers — Definitions and characteristics |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13970:2004/A1:2006 |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 13978-1:2005 Precast concrete products — Precast concrete garages — Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions |
|
1.3.2006 |
1.3.2008 |
|
CEN |
EN 13984:2013 Flexible sheets for waterproofing — Plastic and rubber vapour control layers — Definitions and characteristics |
EN 13984:2004 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 13986:2004+A1:2015 Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking |
EN 13986:2004 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 14016-1:2004 Binders for magnesite screeds — Caustic magnesia and magnesium chloride — Part 1: Definitions, requirements |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 14023:2010 Bitumen and bituminous binders — Specification framework for polymer modified bitumens |
|
1.1.2011 |
1.1.2012 |
|
CEN |
EN 14037-1:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 oC — Part 1: Technical specifications and requirements |
|
1.2.2004 |
1.2.2005 |
|
CEN |
EN 14041:2004 Resilient, textile and laminate floor coverings — Essential characteristics |
|
1.1.2006 |
1.1.2007 |
|
|
EN 14041:2004/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 14055:2010 WC and urinal flushing cisterns |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 14063-1:2004 Thermal insulation products for buildings — In-situ formed expanded clay lightweight aggregate products — Part 1: Specification for the loose-fill products before installation |
|
1.6.2005 |
1.6.2006 |
|
|
EN 14063-1:2004/AC:2006 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 14064-1:2010 Thermal insulation products for buildings — In-situ formed loose-fill mineral wool (MW) products — Part 1: Specification for the loose-fill products before installation |
|
1.12.2010 |
1.12.2011 |
|
CEN |
EN 14080:2013 Timber structures — Glued laminated timber and glued solid timber — Requirements |
EN 14080:2005 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14081-1:2005+A1:2011 Timber structures — Strength graded structural timber with rectangular cross section — Part 1: General requirements |
EN 14081-1:2005 |
1.10.2011 |
31.12.2011 |
|
CEN |
EN 14178-2:2004 Glass in building — Basic alkaline earth silicate glass products — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 14179-2:2005 Glass in building — Heat soaked thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 14188-1:2004 Joint fillers and sealants — Part 1: Specifications for hot applied sealants |
|
1.7.2005 |
1.1.2007 |
|
CEN |
EN 14188-2:2004 Joint fillers and sealants — Part 2: Specifications for cold applied sealants |
|
1.10.2005 |
1.1.2007 |
|
CEN |
EN 14188-3:2006 Joint fillers and sealants — Part 3: Specifications for preformed joint seals |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 14190:2014 Gypsum board products from reprocessing — Definitions, requirements and test methods |
EN 14190:2005 |
13.2.2015 |
13.2.2016 |
|
CEN |
EN 14195:2005 Metal framing components for gypsum plasterboard systems — Definitions, requirements and test methods |
|
1.1.2006 |
1.1.2007 |
|
|
EN 14195:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 14209:2005 Preformed plasterboard cornices — Definitions, requirements and test methods |
|
1.9.2006 |
1.9.2007 |
|
CEN |
EN 14216:2004 Cement — Composition, specifications and conformity criteria for very low heat special cements |
|
1.2.2005 |
1.2.2006 |
|
CEN |
EN 14229:2010 Structural timber — Wood poles for overhead lines |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 14246:2006 Gypsum elements for suspended ceilings — Definitions, requirements and test methods |
|
1.4.2007 |
1.4.2008 |
|
|
EN 14246:2006/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 14250:2010 Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
EN 14250:2004 |
1.11.2010 |
1.11.2010 |
|
CEN |
EN 14296:2005 Sanitary appliances — Communal washing troughs |
|
1.3.2006 |
1.3.2008 |
|
CEN |
EN 14303:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made mineral wool (MW) products — Specification |
EN 14303:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14304:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made flexible elastomeric foam (FEF) products — Specification |
EN 14304:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14305:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made cellular glass (CG) products — Specification |
EN 14305:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14306:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made calcium silicate (CS) products — Specification |
EN 14306:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14307:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made extruded polystyrene foam (XPS) products — Specification |
EN 14307:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14308:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products — Specification |
EN 14308:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14309:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made products of expanded polystyrene (EPS) — Specification |
EN 14309:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14313:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made polyethylene foam (PEF) products — Specification |
EN 14313:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made phenolic foam (PF) products — Specification |
EN 14314:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14315-1:2013 Thermal insulating products for buildings — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam spray system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14316-1:2004 Thermal insulation products for buildings — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14317-1:2004 Thermal insulation products for buildings — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14318-1:2013 Thermal insulating products for buildings — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam dispensed system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam dispensed system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam spray system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14321-2:2005 Glass in building — Thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.6.2006 |
1.6.2007 |
|
CEN |
EN 14339:2005 Underground fire hydrants |
|
1.5.2006 |
1.5.2007 |
|
CEN |
EN 14342:2013 Wood flooring and parquet — Characteristics, evaluation of conformity and marking |
EN 14342:2005+A1:2008 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14351-1:2006+A1:2010 Windows and doors — Product standard, performance characteristics — Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics |
EN 14351-1:2006 |
1.12.2010 |
1.12.2010 |
|
CEN |
EN 14353:2007+A1:2010 Metal beads and feature profiles for use with gypsum plasterboards — Definitions, requirements and test methods |
EN 14353:2007 |
1.11.2010 |
1.11.2010 |
|
CEN |
EN 14374:2004 Timber structures — Structural laminated veneer lumber — Requirements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 14384:2005 Pillar fire hydrants |
|
1.5.2006 |
1.5.2007 |
|
CEN |
EN 14388:2005 Road traffic noise reducing devices — Specifications |
|
1.5.2006 |
1.5.2007 |
|
|
EN 14388:2005/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 14396:2004 Fixed ladders for manholes |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 14399-1:2005 High-strength structural bolting assemblies for preloading — Part 1: General requirements |
|
1.1.2006 |
1.10.2007 |
|
CEN |
EN 14411:2012 Ceramic tiles — Definitions, classification, characteristics, evaluation of conformity and marking |
EN 14411:2006 |
1.7.2013 |
1.7.2014 |
|
CEN |
EN 14428:2004+A1:2008 Shower enclosures — Functional requirements and test methods |
EN 14428:2004 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 14449:2005 Glass in building — Laminated glass and laminated safety glass — Evaluation of conformity/Product standard |
|
1.3.2006 |
1.3.2007 |
|
|
EN 14449:2005/AC:2005 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 14471:2013+A1:2015 Chimneys — System chimneys with plastic flue liners — Requirements and test methods |
EN 14471:2013 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 14496:2005 Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards — Definitions, requirements and test methods |
|
1.9.2006 |
1.9.2007 |
|
CEN |
EN 14509:2013 Self-supporting double skin metal faced insulating panels — Factory made products — Specifications |
EN 14509:2006 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14516:2006+A1:2010 Baths for domestic purposes |
|
1.5.2011 |
1.5.2012 |
|
CEN |
EN 14527:2006+A1:2010 Shower trays for domestic purposes |
|
1.5.2011 |
1.5.2012 |
|
CEN |
EN 14528:2007 Bidets — Functional requirements and test methods |
EN 14528:2005 |
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14545:2008 Timber structures — Connectors — Requirements |
|
1.8.2009 |
1.8.2010 |
|
CEN |
EN 14566:2008+A1:2009 Mechanical fasteners for gypsum plasterboard systems — Definitions, requirements and test methods |
EN 14566:2008 |
1.5.2010 |
1.11.2010 |
|
CEN |
EN 14592:2008+A1:2012 Timber structures — Dowel-type fasteners — Requirements |
EN 14592:2008 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 14604:2005 Smoke alarm devices |
|
1.5.2006 |
1.8.2008 |
|
|
EN 14604:2005/AC:2008 |
|
1.8.2009 |
1.8.2009 |
|
CEN |
EN 14647:2005 Calcium aluminate cement — Composition, specifications and conformity criteria |
|
1.8.2006 |
1.8.2007 |
|
|
EN 14647:2005/AC:2006 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 14680:2006 Adhesives for non-pressure thermoplastic piping systems — Specifications |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14688:2006 Sanitary appliances — Wash basins — Functional requirements and test methods |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14695:2010 Flexible sheets for waterproofing — Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete — Definitions and characteristics |
|
1.10.2010 |
1.10.2011 |
|
CEN |
EN 14716:2004 Stretched ceilings — Requirements and test methods |
|
1.10.2005 |
1.10.2006 |
|
CEN |
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining — Product specification and requirements |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining — Product specification and requirements |
EN 14783:2006 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14785:2006 Residential space heating appliances fired by wood pellets — Requirements and test methods |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14814:2007 Adhesives for thermoplastic piping systems for fluids under pressure — Specifications |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14843:2007 Precast concrete products — Stairs |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14844:2006+A2:2011 Precast concrete products — Box culverts |
EN 14844:2006+A1:2008 |
1.9.2012 |
1.9.2013 |
|
CEN |
EN 14846:2008 Building hardware — Locks and latches — Electromechanically operated locks and striking plates — Requirements and test methods |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 14889-1:2006 Fibres for concrete — Part 1: Steel fibres — Definitions, specifications and conformity |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 14889-2:2006 Fibres for concrete — Part 2: Polymer fibres — Definitions, specifications and conformity |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 14891:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, evaluation of conformity, classification and designation |
|
1.3.2013 |
1.3.2014 |
|
|
EN 14891:2012/AC:2012 |
|
1.3.2013 |
1.3.2013 |
|
CEN |
EN 14904:2006 Surfaces for sports areas — Indoor surfaces for multi-sports use — Specification |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 14909:2012 Flexible sheets for waterproofing — Plastic and rubber damp proof courses — Definitions and characteristics |
EN 14909:2006 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 14915:2013 Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking |
EN 14915:2006 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14933:2007 Thermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded polystyrene (EPS) — Specification |
|
1.7.2008 |
1.7.2009 |
|
CEN |
EN 14934:2007 Thermal insulation and light weight fill products for civil engineering applications — Factory made products of extruded polystyrene foam (XPS) — Specification |
|
1.7.2008 |
1.7.2009 |
|
CEN |
EN 14963:2006 Roof coverings — Continuous rooflights of plastics with or without upstands — Classification, requirements and test methods |
|
1.8.2009 |
1.8.2012 |
|
CEN |
EN 14964:2006 Rigid underlays for discontinuous roofing — Definitions and characteristics |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14967:2006 Flexible sheets for waterproofing — Bitumen damp proof courses — Definitions and characteristics |
|
1.3.2007 |
1.3.2008 |
|
CEN |
EN 14989-1:2007 Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 1: Vertical air/flue terminals for C6-type appliances |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14989-2:2007 Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 2: Flue and air supply ducts for room sealed appliances |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 14991:2007 Precast concrete products — Foundation elements |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14992:2007+A1:2012 Precast concrete products — Wall elements |
EN 14992:2007 |
1.4.2013 |
1.7.2013 |
|
CEN |
EN 15037-1:2008 Precast concrete products — Beam-and-block floor systems — Part 1: Beams |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 15037-2:2009+A1:2011 Precast concrete products — Beam-and-block floor systems — Part 2: Concrete blocks |
|
1.12.2011 |
1.12.2012 |
|
CEN |
EN 15037-3:2009+A1:2011 Precast concrete products — Beam-and-block floor systems — Part 3: Clay blocks |
|
1.12.2011 |
1.12.2012 |
|
CEN |
EN 15037-4:2010+A1:2013 Precast concrete products — Beam-and-block floor systems — Part 4: Expanded polystyrene blocks |
EN 15037-4:2010 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15037-5:2013 Precast concrete products — Beam-and-block floor systems — Part 5: Lightweight blocks for simple formwork |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15048-1:2007 Non-preloaded structural bolting assemblies — Part 1: General requirements |
|
1.1.2008 |
1.10.2009 |
|
CEN |
EN 15050:2007+A1:2012 Precast concrete products — Bridge elements |
EN 15050:2007 |
1.12.2012 |
1.12.2012 |
|
CEN |
EN 15069:2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 15088:2005 Aluminium and aluminium alloys — Structural products for construction works — Technical conditions for inspection and delivery |
|
1.10.2006 |
1.10.2007 |
|
CEN |
EN 15102:2007+A1:2011 Decorative wall coverings — Roll and panel form |
EN 15102:2007 |
1.7.2012 |
1.7.2012 |
|
CEN |
EN 15129:2009 Anti-seismic devices |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout — Part 1: Definitions, specifications and conformity criteria |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 15250:2007 Slow heat release appliances fired by solid fuel — Requirements and test methods |
|
1.1.2008 |
1.1.2010 |
|
CEN |
EN 15258:2008 Precast concrete products — Retaining wall elements |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 15274:2015 General purpose adhesives for structural assembly — Requirements and test methods |
EN 15274:2007 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 15275:2015 Structural adhesives — Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
EN 15275:2007 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 15283-1:2008+A1:2009 Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 1: Gypsum boards with mat reinforcement |
EN 15283-1:2008 |
1.6.2010 |
1.6.2011 |
|
CEN |
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 2: Gypsum fibre boards |
EN 15283-2:2008 |
1.6.2010 |
1.6.2011 |
|
CEN |
EN 15285:2008 Agglomerated stone — Modular tiles for flooring and stairs (internal and external) |
|
1.1.2009 |
1.1.2010 |
|
|
EN 15285:2008/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 15286:2013 Agglomerated stone — Slabs and tiles for wall finishes (internal and external) |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15322:2013 Bitumen and bituminous binders — Framework for specifying cut-back and fluxed bituminous binders |
EN 15322:2009 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15368:2008+A1:2010 Hydraulic binder for non-structural applications — Definition, specifications and conformity criteria |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 15381:2008 Geotextiles and geotextile-related products — Characteristics required for use in pavements and asphalt overlays |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 15382:2013 Geosynthetic barriers — Characteristics required for use in transportation infrastructure |
EN 15382:2008 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15435:2008 Precast concrete products — Normal weight and lightweight concrete shuttering blocks — Product properties and performance |
|
1.2.2009 |
1.2.2010 |
|
CEN |
EN 15497:2014 Structural finger jointed solid timber — Performance requirements and minimum production requirements |
|
10.10.2014 |
10.10.2015 |
|
CEN |
EN 15498:2008 Precast concrete products — Wood-chip concrete shuttering blocks — Product properties and performance |
|
1.2.2009 |
1.2.2010 |
|
CEN |
EN 15501:2013 Thermal insulation products for building equipment and industrial installations — Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products — Specification |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 15600-1:2010 Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 15650:2010 Ventilation for buildings — Fire dampers |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 15651-1:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 1: Sealants for facade elements |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15651-2:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 2: Sealants for glazing |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15651-3:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 3: Sealants for sanitary joints |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15651-4:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 4: Sealants for pedestrian walkways |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15682-2:2013 Glass in building — Heat soaked thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15683-2:2013 Glass in building — Thermally toughened soda lime silicate channel shaped safety glass — Part 2: Evaluation of conformity/Product standard |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) — Expanded clay lightweight aggregate products (LWA) |
|
1.8.2013 |
1.8.2014 |
|
CEN |
EN 15743:2010+A1:2015 Supersulfated cement — Composition, specifications and conformity criteria |
EN 15743:2010 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 15814:2011+A2:2014 Polymer modified bituminous thick coatings for waterproofing — Definitions and requirements |
EN 15814:2011+A1:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 15821:2010 Multi-firing sauna stoves fired by natural wood logs — Requirements and test methods |
|
1.7.2011 |
1.7.2012 |
|
CEN |
EN 15824:2009 Specifications for external renders and internal plasters based on organic binders |
|
1.4.2010 |
1.4.2011 |
|
CEN |
EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable windows — Product standard, performance characteristics — Fire resisting and/or smoke control characteristics |
|
1.9.2016 |
1.9.2019 |
|
CEN |
EN 16069:2012+A1:2015 Thermal insulation products for buildings — Factory made products of polyethylene foam (PEF) — Specification |
EN 16069:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods |
EN 16153:2013 |
10.7.2015 |
10.7.2016 |
|
Cenelec |
EN 50575:2014 Power, control and communication cables — Cables for general applications in construction works subject to reaction to fire requirements |
|
1.7.2016 |
1.7.2017 |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.