Back to EUR-Lex homepage

EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search
You are here

Document 32017R1154R(01)

Corrigendum to Commission Regulation (EU) 2017/1154 of 7 June 2017 amending Regulation (EU) 2017/1151 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Regulation (EC) No 692/2008 and Directive 2007/46/EC of the European Parliament and of the Council as regards real-driving emissions from light passenger and commercial vehicles (Euro 6) (OJ L 175, 7.7.2017)

C/2017/6732

OJ L 256, 4.10.2017, p. 11–12 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

ELI: http://data.europa.eu/eli/reg/2017/1154/corrigendum/2017-10-04/oj

4.10.2017   

EN

Official Journal of the European Union

L 256/11

Corrigendum to Commission Regulation (EU) 2017/1154 of 7 June 2017 amending Regulation (EU) 2017/1151 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Regulation (EC) No 692/2008 and Directive 2007/46/EC of the European Parliament and of the Council as regards real-driving emissions from light passenger and commercial vehicles (Euro 6)

( Official Journal of the European Union L 175 of 7 July 2017 )

On page 715, in Annex II, amending Annex IIIA to Regulation (EU) 2017/1151, in point 8:

for:

‘The last sentence in point 2.3 is amended as follows:’,

read:

‘The last sentence in point 2.4 is replaced by the following:’;

on page 727, in Annex II, amending Annex IIIA to Regulation (EU) 2017/1151, in point 36:

for:

‘(d)

in point 1 following the title “Verification of trip dynamic conditions and calculation of the final RDE emissions result with method 1 (Moving Averaging Window)”, the words “Step 1. Segmentation of the data and exclusion of cold start emissions (section 4 in Appendix 4);” are replaced by the words “Step 1. Segmentation of the data;”;

(e)

in point 3.1 following the title “Verification of trip dynamic conditions and calculation of the final RDE emissions result with method 1 (Moving Averaging Window)”, the last sentence of the first paragraph is amended as follows:

“The calculation described in the present point shall be run from the first point (forward).”;

(f)

in point 3.1 following the title “Verification of trip dynamic conditions and calculation of the final RDE emissions result with method 1 (Moving Averaging Window)”, in the second paragraph, the second and fourth indents are deleted;

(g)

in point 3.2. following the title “Verification of trip dynamic conditions and calculation of the final RDE emissions result with method 1 (Moving Averaging Window)”, the following paragraph is added:

“In case a NOVC-HEV is tested, the window calculation shall start at the point of ignition on and include driving events during which no CO2 is emitted.”;

(h)

in point 5. following the title “Verification of trip dynamic conditions and calculation of the final RDE emissions result with method 1 (Moving Averaging Window)”, the following paragraph is inserted:

“For N2 category vehicles that are equipped in accordance with Directive 92/6/EEC with a device limiting vehicle speed to 90 km/h, the share of motorway windows in the complete test shall be at least 5 %.”;

(i)

in point 5.3. following the title “Verification of trip dynamic conditions and calculation of the final RDE emissions result with method 1 (Moving Averaging Window)”, the following paragraph is added:

“When testing a NOVC-HEV and only if the specified minimum requirement of 50 % is not met, the upper positive tolerance tol 1 may be increased by steps of 1 percentage point until the 50 % of normal windows target is reached. When using this approach, tol 1 shall never exceed 50 %.”;

(j)

in point 6.1. following the title “Verification of trip dynamic conditions and calculation of the final RDE emissions result with method 1 (Moving Averaging Window)”, the following paragraph is added:

“For all averaging windows including cold start data points, as defined in point 4 of Appendix 4, the weighting function is set to 1.”.’,

read:

‘(36a)

 Appendix 5 is amended as follows:

(a)

in point 1, the words “Step 1. Segmentation of the data and exclusion of cold start emissions (section 4 in Appendix 4);” are replaced by the words “Step 1. Segmentation of the data;”;

(b)

in point 3.1., in the first paragraph, the last sentence is replaced by the following:

“The calculation described in the present point shall be run from the first point (forward).”;

(c)

in point 3.1., in the second paragraph, the second and fourth indents are deleted;

(d)

in point 3.2., the following paragraph is added:

“In case a NOVC-HEV is tested, the window calculation shall start at the point of ignition on and include driving events during which no CO2 is emitted.”;

(e)

in point 5, following the title “VERIFICATION OF TRIP COMPLETENESS AND NORMALITY”, the following paragraph is inserted:

“For N2 category vehicles that are equipped in accordance with Directive 92/6/EEC with a device limiting vehicle speed to 90 km/h, the share of motorway windows in the complete test shall be at least 5 %.”;

(f)

in point 5.3., the following paragraph is added:

“When testing a NOVC-HEV and only if the specified minimum requirement of 50 % is not met, the upper positive tolerance tol 1 may be increased by steps of 1 percentage point until the 50 % of normal windows target is reached. When using this approach, tol 1 shall never exceed 50 %.”;

(g)

in point 6.1., the following paragraph is added:

“For all averaging windows including cold start data points, as defined in point 4 of Appendix 4, the weighting function is set to 1.”;’.
Top