‘ANNEX XIV

Activity-specific guidelines for determination of emissions from aviation activities as listed in Annex I to Directive 2003/87/EC

1.   BOUNDARIES AND COMPLETENESS

The activity-specific guidelines in this Annex shall be used to monitor and report emissions occurring from aviation activities as listed in Annex I to Directive 2003/87/EC. Annex II for the combustion of fuels is not applicable to mobile sources such as aircraft.

All flights included in Annex I to Directive 2003/87/EC and performed by an aircraft operator during the reporting period shall be included. For the purpose of identifying the unique aircraft operator as defined by Article 3(o) of Directive 2003/87/EC responsible for a flight, the call sign used for Air Traffic Control (ATC) purposes shall be used. The call sign is the ICAO designator in box 7 of the flight plan or, if not available, the registration marking of the aircraft. If the identity of the aircraft operator is not known, the owner of the aircraft shall be regarded as the aircraft operator unless it proves to the satisfaction of the competent authority who was the aircraft operator.

2.   DETERMINATION OF CO2 EMISSIONS

CO2 emissions from aviation activities shall be calculated using the formula:

CO2 emissions = Fuel consumption * emission factor

2.1.   CHOICE OF METHODOLOGY

The aircraft operator shall define in the monitoring plan which monitoring methodology is used for each aircraft type. In case the aircraft operator intends to use leased-in or other aircraft types which are not yet included in the monitoring plan at the time of submission to the competent authority, the aircraft operator shall include in the monitoring plan a description of the procedure to be used for defining the monitoring methodology for these additional aircraft types. The aircraft operator shall ensure that the monitoring methodology, once it has been chosen, is consistently applied.

The aircraft operator shall define in the monitoring plan for each aircraft type:

(a)	which calculation formula will be used (method A or method B);

(b)	the data source which is used for determining the data on fuel uplift and fuel contained in the tank, and the methods for transmitting, storing and retrieving that data;

(c)	which method is used to determine density, where applicable. When density-temperature correlation tables are used the operator shall specify the source of this data.

For points (b) and (c), where necessary due to special circumstances such as fuel suppliers who cannot provide all the required data for a certain methodology, this list of applied methodologies may contain a list of deviations from the general methodology for specific aerodromes.

2.2.   FUEL CONSUMPTION

Fuel consumption is expressed as fuel consumed in mass units (tonnes) during the reporting period.

Fuel consumed shall be monitored for each flight and for each fuel and shall include fuel consumed by the auxiliary power unit as provided for by the calculation formulae below. Fuel uplift may be determined based on the measurement by the fuel supplier, as documented in the fuel delivery notes or invoices for each flight. Alternatively, fuel uplift may also be determined using aircraft onboard measurement systems. The data shall be taken from the fuel supplier, or recorded in the mass and balance documentation, in the aircraft technical log or be transmitted electronically from the aircraft to the aircraft operator. Fuel contained in the tank may be determined using aircraft onboard measurement systems and recorded in the mass and balance documentation, in the aircraft technical log or transmitted electronically from the aircraft to the aircraft operator.

The operator shall choose the method which provides for the most complete and timely data combined with the lowest uncertainty without incurring unreasonable costs.

2.2.1.   CALCULATION FORMULAE

Actual fuel consumed shall be calculated using one of the following two methods:

METHOD A: The following formula is used: Actual fuel consumption for each flight (tonnes) = Amount of fuel contained in aircraft tanks once fuel uplift for the flight is complete (tonnes) – Amount of fuel contained in aircraft tanks once fuel uplift for subsequent flight is complete (tonnes) + Fuel uplift for that subsequent flight (tonnes) In case there is no fuel uplift for the flight or subsequent flight, the amount of fuel contained in aircraft tanks shall be determined at block-off for the flight or subsequent flight. In the exceptional case that an aircraft performs activities other than a flight, such as undergoing major maintenance involving the emptying of the tanks, after the flight whose fuel consumption is being monitored, an aircraft operator may substitute the figures “Amount of fuel contained in aircraft tanks once fuel uplift for subsequent flight is complete + fuel uplift for that subsequent flight” by the “amount of fuel remaining in tanks at the start of the subsequent activity of the aircraft”, as recorded by technical logs.

METHOD B: The following formula is used: Actual fuel consumption for each flight (tonnes) = Amount of fuel remaining in aircraft tanks at block-on at the end of the previous flight (tonnes) + Fuel uplift for the flight (tonnes) – Amount of fuel contained in tanks at block-on at the end of the flight (tonnes) The moment of block-on may be considered equivalent to the moment of engine shut down. When an aircraft did not perform a flight previous to the flight whose fuel consumption is being measured, aircraft operators may provide the amount of fuel remaining in aircraft tanks at the end of the previous activity of the aircraft, as recorded by technical logs, instead of the “Amount of fuel remaining in aircraft tanks at block-on at the end of the previous flight”.

2.2.2.   QUANTIFICATION REQUIREMENTS

Tier 1

Fuel consumption over the reporting period is determined with a maximum uncertainty of less than ± 5,0 %.

Tier 2

Fuel consumption over the reporting period is determined with a maximum uncertainty of less than ± 2,5 %.

Aircraft operators with average reported annual emissions over the previous trading period (or a conservative estimate or projection if reported emissions are not available or no longer applicable) equal to or less than 50 kilotonnes of fossil CO2 shall apply as a minimum tier 1 for major source streams. All other aircraft operators shall apply tier 2 for major source streams.

2.2.3.   FUEL DENSITY

If the amount of fuel uplift or the amount of fuel remaining in the tanks is determined in units of volume (litres or m3), the aircraft operator shall convert this amount from volume to mass by using actual density values. Actual density means density expressed as kg/litre and determined for the applicable temperature for a specific measurement. Unless on-board measurement systems can be used, the actual density shall be the one measured by the fuel supplier at fuel uplift and recorded on the fuel invoice or delivery note. If such information is not available, the actual density shall be determined from the temperature of the fuel during the uplift provided by the fuel supplier or specified for the aerodrome where the fuel uplift takes place, using standard density-temperature correlation tables. Only in cases for which it is shown to the satisfaction of the competent authority that actual values are not available, a standard density factor of 0,8 kg/litre shall be applied.

2.3.   EMISSION FACTOR

The following reference factors, expressed as t CO2/t fuel, based on the reference net calorific values and emission factors specified in Section 11 of Annex I, shall be used for each aviation fuel:

Table 1

Emission factors for aviation fuels

Fuel	Emission factor (tCO2/tfuel)
Aviation gasoline (AvGas)	3,10
Jet gasoline (Jet B)	3,10
Jet kerosene (Jet A1 or Jet A)	3,15

For reporting purposes, this approach is considered as tier 1.

For alternative fuels for which no reference values have been defined, activity specific emission factors shall be determined as specified in Section 5.5 and 13 of Annex I. In such cases the net calorific value shall be determined and reported as a memo-item. If the alternative fuel contains biomass, the requirements for monitoring and reporting of biomass content as set out in Annex I shall apply.

For commercially traded fuels the emission factor or the carbon content, on which it is based, the biomass content and net calorific value may be derived from the purchasing records for the respective fuel provided by the fuel supplier, provided it has been derived based on accepted international standards.

3.   UNCERTAINTY ASSESSMENT

The aircraft operator shall have an understanding of the main sources of uncertainty when calculating emissions. Aircraft operators shall not be required to carry out a detailed uncertainty assessment as set out in Section 7.1 of Annex I, provided the aircraft operator identifies sources of uncertainties and their associated levels of uncertainty. This information shall be used when selecting the monitoring methodology under section 2.2.

Where fuel uplifts are determined solely on the invoiced quantity of fuel or other appropriate information provided by the fuel supplier such as delivery notes for fuel uplift per flight, no further proof of the associated uncertainty level is required.

Where on-board systems are used for measuring fuel uplift, the level of uncertainty associated with fuel measurements shall be supported by calibration certificates. If such certificates are not available, aircraft operators shall.

—	provide the aircraft manufacturer’s specifications determining uncertainty levels of on-board fuel measurement systems, and,

—	provide evidence of carrying out routine checks of the satisfactory operation of the fuel measurement systems,

Uncertainties for all other components of the monitoring methodology may be based on conservative expert judgement taking into account the estimated number of flights within the reporting period. There is no requirement to take into account the cumulative effect of all components of the measurement system on the uncertainty of the annual activity data.

The aircraft operator shall regularly carry out cross-checks between uplift quantity as provided by invoices and uplift quantity indicated by on-board measurement, and take corrective action in accordance with section 10.3.5 if deviations are observed.

4.   SIMPLIFIED PROCEDURES FOR SMALL EMITTERS

Aircraft operators operating fewer than 243 flights per period for three consecutive four-month periods and aircraft operators operating flights with total annual emissions lower than 10 000 tonnes CO2 per year shall be considered small emitters.

Aircraft operators that are small emitters may estimate the fuel consumption using tools implemented by Eurocontrol or another relevant organisation, which can process all relevant air traffic information such as that available to Eurocontrol. The applicable tools shall be used only if they are approved by the Commission including the application of correction factors to compensate for any inaccuracies in the modelling methods.

An aircraft operator making use of the simplified procedure and exceeding the threshold for small emitters during a reporting year shall notify this fact to the competent authority. Unless the aircraft operator demonstrates to the satisfaction of the competent authority, that the threshold will not be exceeded again from the following reporting period onwards, the aircraft operator shall update the monitoring plan to meet the monitoring requirements laid down in sections 2 and 3. The revised monitoring plan shall be submitted without undue delay to the competent authority for approval.

5.   APPROACHES FOR DATA GAPS

The aircraft operator shall take all necessary action to prevent missing data from occurring by implementing suitable control activities as referred to in section 10.2 to 10.3 of Annex I of these guidelines.

If a competent authority, an aircraft operator or the verifier detects that for a flight covered by Annex I to Directive 2003/87/EC part of the data necessary for determining the emissions are missing as a result of circumstances beyond the control of the aircraft operator and cannot be determined by an alternative method defined in the monitoring plan, the emissions for that flight may be estimated by the operator using the tools mentioned in section 4. The quantity of emissions for which such approach is used shall be specified in the annual emission report.

6.   MONITORING PLAN

Aircraft operators shall submit their monitoring plan to the competent authority for approval at least four months prior to the start of the first reporting period.

The competent authority shall ensure that the aircraft operator reviews the monitoring plan before the start of each trading period and submits a revised monitoring plan as appropriate. Subsequent to the submission of a monitoring plan for the reporting of emissions from 1 January 2010, a review of the monitoring plan shall take place before the start of the trading period commencing in 2013.

In performing such review, the aircraft operator shall assess to the satisfaction of the competent authority if the monitoring methodology can be changed in order to improve the quality of the reported data without leading to unreasonably high costs. Proposed changes to the monitoring methodology, if any, shall be notified to the competent authority. Substantial changes to the monitoring methodology which require an update of the monitoring plan shall be subject to the approval of the competent authority. Substantial changes include:

—	a change of the average reported annual emissions which require the aircraft operator to apply a different tier as laid down in section 2.2.2,

—	a change in the number of flights or in the total annual emissions which cause the aircraft operator to exceed the threshold for small emitters as laid down in section 4,

—	substantial changes to the type of fuels used.

By way of derogation from Section 4.3 of Annex I, the monitoring plan shall contain the following information:

For all aircraft operators:

(1)	identification of the aircraft operator, call sign or other unique designator used for air traffic control purposes, contact details of the aircraft operator and of a responsible person at the aircraft operator, contact address;

(2)	identification of the version of the Monitoring Plan;

(3)

an initial list of aircraft types in its fleet operated at the time of submission of the monitoring plan and the number of aircraft per type, and an indicative list of additional aircraft types expected to be used including, where available, an estimated number of aircraft per type as well as the fuel streams (fuel types) associated with each aircraft type;

(4)	a description of procedures, systems and responsibilities used to track the completeness of the list of emission sources over the monitoring year, i.e. for ensuring the completeness of monitoring and reporting of the emissions of owned aircraft as well as leased-in aircraft;

(5)	a description of the procedures used to monitor the completeness of the list of flights operated under the unique designator by aerodrome pair, and the procedures used for determining whether flights are covered by Annex I of Directive 2003/87/EC, ensuring completeness and avoiding double-counting;

(6)	a description of data acquisition and handling activities and control activities, the quality control and assurance activities, including maintenance and calibration of measurement equipment (see section 10.3 of Annex I);

(7)

where applicable, information on relevant links with activities undertaken under the Community eco-management and audit scheme (EMAS) and other environmental management systems (e.g. ISO14001:2004), in particular on procedures and controls with relevance to greenhouse gas emissions monitoring and reporting.

In addition to points 1 to 7, for all aircraft operators, except small emitters who want to make use of the simplified procedure defined in section 4, the monitoring plan shall contain:

(8)

a description of the methods for monitoring fuel consumption in both owned and leased-in aircraft, including: (a) the chosen methodology (method A or method B) for calculation of fuel consumption; if the same method is not applied for all aircraft types, a justification for this approach is to be provided, as well as a list specifying which method is used under which conditions; (b) procedures for measurement of fuel uplifts and fuel in tanks, including the selected tiers, a description of the measurement instruments involved and the procedures for recording, retrieving, transmitting and storing information regarding measurements, as applicable; (c) a procedure to ensure that the total uncertainty of fuel measurements will comply with the requirements of the selected tier, referring to calibration certificates of measurement systems, national laws, clauses in customer contracts or fuel suppliers accuracy standards.

(9)	the procedures for measurement of the density used for fuel uplifts and fuel in tanks, including a description of the measurement instruments involved, or if measurement is not feasible, the standard value used and a justification for this approach;

(10)

emission factors used for each fuel type, or in case of alternative fuels, the methodologies for determining the emission factors, including the approach for sampling, methods of analysis, a description of the laboratories used and of their accreditation and/or of their quality assurance procedures.

In addition to points 1 to 7, for small emitters who want to make use of the simplified procedure defined in section 4, the monitoring plan shall contain:

(11)	Evidence that the thresholds defined for small emitters in section 4 are met;

(12)	A confirmation of which tool as described in section 4 will be used, including a description of the tool.

The competent authority may require the aircraft operator to use an electronic template for submission of the monitoring plan. The Commission may publish a standardised electronic template or file format specification. In this case the competent authority shall accept the use by the aircraft operator of this template or specification, unless the competent authority’s template requires at least the same data input.

7.   REPORTING FORMAT

Aircraft operators shall use the format set out in section 8 for reporting their annual emissions. The competent authority may require the aircraft operator to use an electronic template for submission of the annual emission report. The Commission may publish a standardised electronic template or file format specification. In this case the competent authority shall accept the use by the aircraft operator of this template or specification, unless the competent authority’s template requires at least the same data input.

Emissions shall be reported as rounded tonnes of CO2. Emission factors shall be rounded to include only significant digits both for emission calculations and reporting purposes. Fuel consumption per flight shall be used with all significant digits for calculation.

8.   CONTENT OF THE ANNUAL EMISSION REPORT

Each aircraft operator shall include the following information in its annual emission report:

(1)	data identifying the aircraft operator as set out by Annex IV of Directive 2003/87/EC, and the call sign or other unique designators used for air traffic control purposes, as well as relevant contact details;

(2)	name and address of the verifier of the report;

(3)	the reporting year;

(4)	reference to and version number of the relevant approved monitoring plan;

(5)	relevant changes in the operations and deviations from the approved monitoring plan during the reporting period;

(6)	the aircraft registration numbers and types of aircraft used in the period covered by the report to perform the aviation activities covered by Annex I of Directive 2003/87/EC carried out by the aircraft operator;

(7)	the total number of flights covered by the report;

(8)	the data according to Table 2;

(9)	Memo-Items: amount of biomass used as fuel during the reporting year (in tonnes or m3) listed per fuel type.

Table 2

Reporting format for annual emissions from aviation activities

Parameter	Units	Source stream			Total
		Fuel type 1	Fuel type 2	Fuel type n
Name of fuel
Emission sources using each type of source stream (Generic aircraft types):
Total fuel consumption	t
Net Calorific Value of the Fuel (2)	TJ/t
Emission Factor of this fuel	t CO2/t or t CO2/TJ
Total aggregated CO2 emissions from all eligible flights using this fuel	t CO2
of which departure MS is the same as arrival MS (domestic flights)	t CO2
of which all other flights (international flights both intra and extra EU)	t CO2
Aggregated CO2 emissions from all flights of which departure Member State is the same as arrival Member State (domestic flights):
Member State 1	t CO2
Member State 2	t CO2
Member State n	t CO2
Aggregated CO2 emissions from all flights departing from each Member State to another Member State or a third country  (3) :
Member State 1	t CO2
Member State 2	t CO2
Member State n	t CO2
Aggregated CO2 emissions from all flights arriving at each Member State from a third country  (3) :
Member State 1	t CO2
Member State 2	t CO2
Member State n	t CO2

Each aircraft operator shall include the following information as an annex to its annual emission report:

—	Annual emissions and annual numbers of flights per aerodrome pair.

The operator may request that this annex is treated as confidential information.

9.   VERIFICATION

In addition to the verification requirements set out in Section 10.4 of Annex I, the following shall be taken into account by the verifier:

—	completeness of flight and emissions data compared to air traffic data such as collected by Eurocontrol,

—	consistency between reported data and mass and balance documentation,

—	consistency between aggregated fuel consumption data and data on fuel purchased or otherwise supplied to the aircraft performing the aviation activity.’

‘ANNEX XV

Activity specific guidelines for determination of tonne-kilometre data from aviation activities for the purpose of an application under Articles 3e or 3f of Directive 2003/87/EC

1.   INTRODUCTION

This Annex contains the general guidelines for the monitoring, reporting and verification of tonne-kilometre data for the aviation activities listed in Annex I to Directive 2003/87/EC.

Annex I shall apply to the monitoring, reporting and verification of tonne-kilometre data as appropriate. For this purpose, the references to emissions shall be interpreted as references to tonne-kilometre data. Sections 4.1, 4.2, 5.1, 5.3 to 5.7, 6 to 7 and 11 to 16 of Annex I are not applicable to tonne-kilometre data.

2.   BOUNDARIES AND COMPLETENESS

The activity-specific guidelines of this Annex shall be used to monitor and report tonne-kilometre data from aviation activities as included in Annex I to Directive 2003/87/EC. All flights covered by Annex I of that Directive performed by an aircraft operator during the reporting period shall be included.

For the purpose of identifying the unique aircraft operator as defined by Article 3(o) of Directive 2003/87/EC responsible for a flight, the call sign used for Air Traffic Control (ATC) purposes shall be used. The call sign is the ICAO designator in box 7 of the flight plan or, if not available, the registration marking of the aircraft. If the identity of the aircraft operator is not known, the owner of the aircraft shall be regarded as the aircraft operator unless it proves which other person was the aircraft operator.

3.   THE MONITORING PLAN

Pursuant to Article 3g of Directive 2003/87/EC aircraft operators shall submit a monitoring plan setting out measures to monitor and report tonne-kilometre data.

Aircraft operators shall submit their monitoring plan to the competent authority at least four months prior to the start of the first reporting period for approval.

The aircraft operator shall define in the monitoring plan which monitoring methodology is used for each aircraft type. In case the aircraft operator intends to use leased-in or other aircraft types which are not yet included in the monitoring plan at the time of submission to the competent authority, the aircraft operator shall include in the monitoring plan a description of the procedure to be used for defining the monitoring methodology for these additional aircraft types. The aircraft operator shall ensure that the monitoring methodology, once it has been chosen, is consistently applied.

By way of derogation from Section 4.3 of Annex I, the monitoring plan shall contain the following information:

(1)	identification of the aircraft operator, call sign or other unique designators used for air traffic control purposes, contact details of the aircraft operator and of a responsible person at the aircraft operator, contact address;

(2)	identification of the version of the monitoring plan;

(3)	an initial list of aircraft types in its fleet operated at the time of submission of the monitoring plan and the number of aircraft per type, and an indicative list of additional aircraft types expected to be used including, where available, an estimated number of aircraft per type;

(4)	a description of procedures, systems and responsibilities used to track the completeness of the list of aircraft employed over the monitoring year, i.e. ensuring the completeness of monitoring and reporting of the tonne-kilometre data of owned aircraft as well as leased-in aircraft;

(5)	a description of the procedures used to monitor the completeness of the list of flights operated under the unique designator by aerodrome pair, and the procedures used for determining whether flights are covered by Annex I of Directive 2003/87/EC, ensuring completeness and avoiding double-counting;

(6)	a description of data acquisition and handling activities and control activities in accordance with section 10.3 of Annex I;

(7)	information on relevant links with activities undertaken under a quality management system, in particular on procedures and controls with relevance to tonne-kilometre data monitoring and reporting, if applicable;

(8)

a description of the methods for determining tonne-kilometre data per flight, including (a) the procedures, responsibilities, data sources and calculation formulae for determination and recording of the distance per aerodrome pair; (b) whether a standard mass of 100 kg per passenger (tier 1) is used or the passenger mass from the mass and balance documentation (tier 2). In the case of tier 2, a description of the procedure for obtaining passenger mass is to be provided; (c) a description of the procedures used to determine the mass of freight and mail; (d) a description of the measurement devices used for measuring mass of passengers, freight and mail as applicable.

The competent authority may require the aircraft operator to use an electronic template for submission of the monitoring plan. The Commission may publish a standardised electronic template or file format specification. In this case the competent authority shall accept the use by the aircraft operator of this template or specification, unless the competent authority’s template requires at least the same data input.

4.   METHODOLOGIES FOR CALCULATING TONNE-KILOMETRE DATA

4.1.   CALCULATION FORMULA

Aircraft operators shall monitor and report tonne-kilometre data using a calculation-based methodology. Calculation of tonne-kilometre data shall be based on the following formula:

tonne kilometres (t km) = distance (km) * payload (t)

4.2.   DISTANCE

Distance shall be calculated using the formula:

Distance [km] = Great Circle Distance [km] + 95 km

The Great Circle Distance is defined as the shortest distance between any two points on the surface of the Earth, which shall be approximated using the system referred to in Article 3.7.1.1 of Annex 15 to the Chicago Convention (WGS 84).

The latitude and longitude of aerodromes shall be taken either from aerodrome location data published in Aeronautical Information Publications (hereinafter AIP) in compliance to Annex 15 of the Chicago Convention or from a source using such AIP data.

Distances calculated by software or by a third party may also be used, provided that the calculation methodology is based on the above formula and AIP data.

4.3.   PAYLOAD

Payload shall be calculated using the following formula:

Payload (t) = mass of freight and mail (t) + mass of passengers and checked baggage (t)

4.3.1.   MASS OF FREIGHT AND MAIL

Actual or standard mass contained in the mass and balance documentation for the relevant flights shall be used for calculating payload. Aircraft operators which are not required to have a mass and balance documentation shall propose a suitable methodology for determining mass of freight and mail in the monitoring plan for approval by the competent authority.

The actual freight and mail mass shall exclude the tare weight of all pallets and containers that are not payload, and the service weight.

4.3.2.   MASS OF PASSENGERS AND CHECKED BAGGAGE

Aircraft operators may apply one of two different tiers to determine the mass of passengers. The aircraft operator may select as a minimum the Tier 1 level to determine the mass of passengers and checked baggage. Within the same trading period the chosen tier shall be applied to all flights.

Tier 1

A default value of 100 kg for each passenger and their checked baggage is used.

Tier 2

The mass for passengers and checked baggage contained in the mass and balance documentation for each flight is used.

5.   UNCERTAINTY ASSESSMENT

The aircraft operator shall have an understanding of the main sources of uncertainty when calculating tonne-kilometre data. A detailed uncertainty analysis as set out in Section 7 of Annex I is not required for the methodology of tonne-kilometre data determination.

The aircraft operator shall carry out regularly suitable control activities as set out by section 10.2 and 10.3 of Annex I, and take immediately corrective action in accordance with section 10.3.5 if irregularities are observed.

6.   REPORTING

Reporting of tonne-kilometre data is required for the purpose of applications pursuant to Articles 3e and 3f of Directive 2003/87/EC in respect of the monitoring years specified therein only.

Aircraft operators shall use the format set out in section 7 below for reporting their tonne-kilometre data. The competent authority may require the aircraft operator to use an electronic template for submission of the tonne-kilometre data report. The Commission may publish a standardised electronic template or file format specification. In this case the competent authority shall accept the use by the aircraft operator of this template or specification, unless the competent authority’s template requires at least the same data input.

Tonne-kilometres shall be reported as rounded values of [t km]. All data per flight shall be used with all significant digits for calculation.

7.   CONTENT OF THE REPORT ON TONNE-KILOMETRE DATA

Each aircraft operator shall include the following information in its report on tonne-kilometre data:

(1)	data identifying the aircraft operator as set out by Annex IV of Directive 2003/87/EC, and the call sign or other unique designator used for air traffic control purposes, as well as relevant contact details;

(2)	name and address of the verifier of the report;

(3)	the reporting year;

(4)	reference to and version number of the relevant approved monitoring plan;

(5)	relevant changes in the operations and deviations from the approved monitoring plan during the reporting period;

(6)	the aircraft registration numbers and types of aircraft used in the period covered by the report to perform the aviation activities covered by Annex I of Directive 2003/87/EC carried out by the aircraft operator;

(7)	chosen method for calculation of mass for passengers and checked baggage, as well as for freight and mail;

(8)	total number of passenger kilometres and tonne-kilometres for all flights performed during the year to which the report relates falling within the aviation activities listed in Annex I;

(9)

for each aerodrome pair: ICAO designator of the two aerodromes, distance (= great circle distance + 95 km) in km, total number of flights per aerodrome pair in the reporting period, total mass of passengers and checked baggage (tonnes) during the reporting period per aerodrome pair, total number of passengers during the reporting period, total number of passenger * kilometres per aerodrome pair, total mass of freight and mail (tonnes) during the reporting period per aerodrome pair, total tonne-kilometres per aerodrome pair (t km).

8.   VERIFICATION

In addition to the verification requirements set out in Section 10.4 of Annex I, the following shall be taken into account by the verifier:

—	completeness of flight and tonne-kilometre data compared to air traffic data such as collected by Eurocontrol to ascertain that only eligible flights have been taken into account in the operators report,

—	consistency between reported data and mass and balance documentation,

For tonne-kilometre data, the materiality level shall be 5 %.’