EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32006L0033

Commission Directive 2006/33/EC of 20 March 2006 amending Directive 95/45/EC as regards sunset yellow FCF (E 110) and titanium dioxide (E 171) (Text with EEA relevance)

OJ L 82, 21.3.2006, p. 10–13 (ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, NL, PL, PT, SK, SL, FI, SV)
OJ L 330M, 28.11.2006, p. 285–288 (MT)
Special edition in Bulgarian: Chapter 13 Volume 053 P. 38 - 41
Special edition in Romanian: Chapter 13 Volume 053 P. 38 - 41
Special edition in Croatian: Chapter 13 Volume 030 P. 225 - 228

Legal status of the document No longer in force, Date of end of validity: 29/01/2009; Repealed by 32008L0128

ELI: http://data.europa.eu/eli/dir/2006/33/oj

21.3.2006   

EN

Official Journal of the European Union

L 82/10


COMMISSION DIRECTIVE 2006/33/EC

of 20 March 2006

amending Directive 95/45/EC as regards sunset yellow FCF (E 110) and titanium dioxide (E 171)

(Text with EEA relevance)

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Council Directive 89/107/EEC of 21 December 1988 on the approximation of the laws of the Member States concerning food additives authorised for use in foodstuffs intended for human consumption (1), and in particular Article 3(3)(a) thereof,

After consulting the European Food Safety Authority,

Whereas:

(1)

Commission Directive 95/45/EC of 26 July 1995 laying down specific purity criteria concerning colours for use in foodstuffs (2), sets out the purity criteria for the colours mentioned in Directive 94/36/EC of the European Parliament and of the Council of 30 June 1994 on colours for use in foodstuffs (3).

(2)

Sunset yellow FCF (E 110) is authorised under Directive 94/36/EC as a colour for use in certain foodstuffs. There is scientific evidence that under certain circumstances, Sudan I (1-(phenylazo)-2-naphthalenol) may be formed as an impurity during the production of sunset yellow. Sudan I is an unauthorised colour and an undesired substance in food. Its presence in sunset yellow should therefore be restricted to an amount below the limit of detection, i.e. 0,5 mg/kg. The purity criteria for sunset yellow FCF (E 110) should therefore be amended accordingly.

(3)

Account should be taken of the specifications and analytical techniques for additives set out in the Codex Alimentarius as drafted by the Joint FAO/WHO Expert Committee on Food Additives (JECFA). JECFA began the implementation of a systematic programme to replace the test for heavy metals (as lead) in all existing food additive specifications with appropriate limits for individual metals of concern. These limits for sunset yellow FCF (E 110) should therefore be amended accordingly.

(4)

Titanium dioxide (E 171) is authorised under Directive 94/36/EC as a colour for use in certain foodstuffs. Titanium dioxide can be manufactured to obtain crystals in the anatase or in the rutile form. The platelet form of rutile titanium dioxide differs from the anatase form in structure and optical properties (pearlescence). There is a technological need for the use of the platelet form of rutile titanium dioxide as a colour in foodstuffs and in film coatings for food supplement tablets. On 7 December 2004 the European Food Safety Authority stated that the use of rutile titanium dioxide in the platelet or amorphous forms would not pose any safety concerns. The purity criteria for titanium dioxide (E 171) should therefore be amended in order to include both the anatase and the rutile form of the substance.

(5)

Directive 95/45/EC should therefore be amended accordingly.

(6)

The measures provided for in this Directive are in accordance with the opinion of the Standing Committee on the Food Chain and Animal Health,

HAS ADOPTED THIS DIRECTIVE:

Article 1

The Annex to Directive 95/45/EC is amended in accordance with the Annex to this Directive.

Article 2

1.   Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 10 April 2007 at the latest. They shall forthwith communicate to the Commission the text of those provisions and a correlation table between those provisions and this Directive.

When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.

2.   Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.

Article 3

This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

Article 4

This Directive is addressed to the Member States.

Done at Brussels, 20 March 2006.

For the Commission

Markos KYPRIANOU

Member of the Commission


(1)  OJ L 40, 11.2.1989, p. 27. Directive as last amended by Regulation (EC) No 1882/2003 of the European Parliament and of the Council (OJ L 284, 31.10.2003, p. 1).

(2)  OJ L 226, 22.9.1995, p. 1. Directive as last amended by Directive 2004/47/EC (OJ L 113, 20.4.2004, p. 24).

(3)  OJ L 237, 10.9.1994, p. 13. Directive as amended by Regulation (EC) No 1882/2003.


ANNEX

In the Annex to Directive 95/45/EC, Part B is amended as follows:

(1)

The text concerning sunset yellow FCF (E 110) is replaced by the following:

‘E 110 SUNSET YELLOW FCF

Synonyms

CI Food Yellow 3, Orange Yellow S

Definition

Sunset Yellow FCF consists essentially of disodium 2-hydroxy-1-(4-sulfonatophenylazo) naphthalene-6-sulfonate and subsidiary colouring matters together with sodium chloride and/or sodium sulfate as the principal uncoloured components.

Sunset Yellow FCF is described as the sodium salt. The calcium and the potassium salt are also permitted.

Class

Monoazo

Colour Index No

15985

EINECS

220-491-7

Chemical names

Disodium 2-hydroxy-1-(4-sulfonatophenylazo)naphthalene-6-sulfonate

Chemical formula

C16H10N2Na2O7S2

Molecular weight

452,37

Assay

Content not less than 85 % total colouring matters calculated as the sodium salt

E1 % 1 cm 555 at ca 485 nm in aqueous solution at pH 7

Description

Orange-red powder or granules

Identification

A.

Spectrometry

Maximum in water at ca 485 nm at pH 7

B.

Orange solution in water

 

Purity

Water insoluble matter

Not more than 0,2 %

Subsidiary colouring matters

Not more than 5,0 %

1-(Phenylazo)-2-naphthalenol (Sudan I)

Not more than 0,5 mg/kg

Organic compounds other than colouring matters:

 

4-aminobenzene-1-sulfonic acid

3-hydroxynaphthalene-2,7-disulfonic acid

6-hydroxynaphthalene-2-sulfonic acid

7-hydroxynaphthalene-1,3-disulfonic acid

4,4′-diazoaminodi(benzene sulfonic acid)

6,6′-oxydi(naphthalene-2-sulfonic acid)

Total not more than 0,5 %

Unsulfonated primary aromatic amines

Not more than 0,01 % (calculated as aniline)

Ether extractable matter

Not more than 0,2 % under neutral conditions

Arsenic

Not more than 3 mg/kg

Lead

Not more than 2 mg/kg

Mercury

Not more than 1 mg/kg

Cadmium

Not more than 1 mg/kg’

(2)

The text concerning titanium dioxide (E 171) is replaced by the following:

‘E 171 TITANIUM DIOXIDE

Synonyms

CI Pigment White 6

Definition

Titanium dioxide consists essentially of pure anatase and/or rutile titanium dioxide which may be coated with small amounts of alumina and/or silica to improve the technological properties of the product.

Class

Inorganic

Colour Index No

77891

EINECS

236-675-5

Chemical names

Titanium dioxide

Chemical formula

TiO2

Molecular weight

79,88

Assay

Content not less than 99 % on an alumina and silica-free basis

Description

White to slightly coloured powder

Identification

Solubility

Insoluble in water and organic solvents. Dissolves slowly in hydrofluoric acid and in hot concentrated sulfuric acid.

Purity

Loss on Drying

Not more than 0,5 % (105 oC, 3 hours)

Loss on Ignition

Not more than 1,0 % on a volatile matter free basis (800 oC)

Aluminum oxide and/or silicon dioxide

Total not more than 2,0 %

Matter soluble in 0,5 N HCl

Not more than 0,5 % on an alumina and silica-free basis and, in addition, for products containing alumina and/or silica, not more than 1,5 % on the basis of the product as sold.

Water soluble matter

Not more than 0,5 %

Cadmium

Not more than 1 mg/kg

Antimony

Not more than 50 mg/kg by total dissolution

Arsenic

Not more than 3 mg/kg by total dissolution

Lead

Not more than 10 mg/kg by total dissolution

Mercury

Not more than 1 mg/kg by total dissolution

Zinc

Not more than 50 mg/kg by total dissolution.’.


Top