Help Print this page 
Title and reference
Council Directive 88/218/EEC of 11 April 1988 amending Directive 85/3/EEC on the weights, dimensions and certain other technical characteristics of certain road vehicles

OJ L 98, 15.4.1988, p. 48–48 (ES, DA, DE, EL, EN, FR, IT, NL, PT)
Special edition in Finnish: Chapter 07 Volume 003 P. 161 - 161
Special edition in Swedish: Chapter 07 Volume 003 P. 161 - 161
Languages, formats and link to OJ
BG ES CS DA DE ET EL EN FR GA HR IT LV LT HU MT NL PL PT RO SK SL FI SV
HTML html ES html DA html DE html EL html EN html FR html IT html NL html PT html FI html SV
PDF pdf ES pdf DA pdf DE pdf EL pdf EN pdf FR pdf IT pdf NL pdf PT pdf FI pdf SV
Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal
Multilingual display
Text

31988L0218

Council Directive 88/218/EEC of 11 April 1988 amending Directive 85/3/EEC on the weights, dimensions and certain other technical characteristics of certain road vehicles

Official Journal L 098 , 15/04/1988 P. 0048 - 0048
Finnish special edition: Chapter 7 Volume 3 P. 0161
Swedish special edition: Chapter 7 Volume 3 P. 0161


*****

COUNCIL DIRECTIVE

of 11 April 1988

amending Directive 85/3/EEC on the weights, dimensions and certain other technical characteristics of certain road vehicles

(88/218/EEC)

THE COUNCIL OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Economic Community, and in particular Article 75 thereof,

Having regard to the proposal from the Commission (1),

Having regard to the opinion of the European Parliament (2),

Having regard to the opinion of the Economic and Social Committee (3),

Whereas Directive 85/3/EEC (4) requires a maximum authorized width of 2 500 mm for all vehicles;

Whereas the transport of goods under temperature-controlled conditions requires the use of special vehicles which are equipped with insulated walls;

Whereas extra internal space is required for air circulation and to ensure that the load is prevented from touching the walls; whereas, in the present state of insulation technology, insulated walls should be at least 45 mm thick; whereas it is therefore impossible to use efficiently standard pallets with dimensions of 1 200 × 800 mm and also to comply with a maximum authorized width of 2 500 mm;

Whereas therefore the maximum permitted width of 2 500 mm as laid down in Directive 85/3/EEC should be increased for the category of 'refrigerated vehicles' only,

HAS ADOPTED THIS DIRECTIVE:

Article 1

Directive 895/3/EEC amended as follows:

1. the following indent shall be inserted as the fifth indent of Article 2:

'- thick-walled refrigerated vehicle' means any vehicle whose or movable superstructures are specially equipped for the carriage of goods at controlled temperatures in accordance with Classes B, C, E and F of the Agreement of 1 September 1970 on the International Carriage of Perishable Foodstuffs and on the Special Equipment to be used for such Carriage (ATP) and whose side walls, inclusive of insulation, are each at least 45 mm thick;'

2. Section 1.2. of Annex I shall be replaced by the following:

'1.2. Maximum width:

1.2 // (a) all vehicles // 2,50 m // (b) refrigerated superstructures of thick-walled refrigerated vehicles // 2,60 m.'

Article 2

Member States shall take the measures necessary to comply with this Directive not later than 1 January 1989. They shall forthwith inform the Commission thereof.

Article 3

This Directive is addressed to the Member States.

Done at Luxembourg, 11 April 1988.

For the Council

The President

H. RIESENHUBER

(1) OJ No C 148, 6. 6. 1987, p. 10.

(2) OJ No C 305, 16. 11. 1987, p. 152.

(3) OJ No C 319, 30. 11. 1987, p. 25.

(4) OJ No L 2, 3. 1. 1985, p. 14.

Top