EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 02013R1387-20140701
Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011
Consolidated text: Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011
Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011
2013R1387 — EN — 01.07.2014 — 001.002
This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents
|
COUNCIL REGULATION (EU) No 1387/2013 of 17 December 2013 (OJ L 354, 28.12.2013, p.201) |
Amended by:
|
|
|
Official Journal |
||
|
No |
page |
date |
||
|
L 192 |
9 |
1.7.2014 |
||
Corrected by:
COUNCIL REGULATION (EU) No 1387/2013
of 17 December 2013
suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:|
(1) |
The Union production of the agricultural and industrial products set out in Annex I is currently inadequate or non-existent, and thus the needs of user industries in the Union cannot be met. |
|
(2) |
It is therefore in the interests of the Union to suspend partially or totally the autonomous Common Customs Tariff duties for those products. |
|
(3) |
Council Regulation (EU) No 1344/2011 ( 1 ) has been amended many times. In addition, following its amendment by Council Regulation (EU) No 1220/2012 ( 2 ), fishery products were removed from the scope of Regulation (EU) No 1344/2011. In the interest of transparency, Regulation (EU) No 1344/2011 should therefore be replaced in its entirety. |
|
(4) |
Regulations suspending the autonomous Common Customs Tariff duties on certain industrial and agricultural products have renewed previous measures to a great extent. Therefore, in the interests of rationalising the implementation of the measures concerned, it is appropriate not to limit the period of validity of this Regulation, as its scope can be adapted and products can be added to or removed from Annex I to this Regulation by means of a Council Regulation. |
|
(5) |
In view of their temporary nature, the suspensions listed in Annex I to this Regulation should be reviewed systematically, and at the latest five years after their date of application or renewal. Moreover, it might be necessary at any time to close certain suspensions, following a proposal of the Commission on the basis of a review carried out on its own initiative or at the request of one or more Member States if it is no longer in the Union's interest to maintain the suspensions or due to technical product developments, changed circumstances or economic trends on the market. |
|
(6) |
Statistics for certain products listed in Annex I to this Regulation are frequently expressed in pieces, square meters or measurement units other than weight. However, there are no such supplementary units in the Combined Nomenclature laid down in Annex I to Council Regulation (EEC) No 2658/87 ( 3 ). It is therefore necessary to provide that not only the weight in kilograms or tonnes, but also the relevant supplementary units for the imports of the products concerned, are entered in the declaration for release for free circulation. |
|
(7) |
Since the suspensions laid down in this Regulation must take effect on 1 January 2014, this Regulation should enter into force immediately upon its publication in the Official Journal of the European Union and should apply from 1 January 2014. |
|
(8) |
In accordance with the principle of proportionality, it is necessary and appropriate for the achievement of the basic objectives of improving the competitive capacity of the Union industry, thereby enabling that industry to maintain or create employment and modernise its structures, to lay down rules on the suspension of the Common Customs Tariff duties for the products set out in Annex I. In accordance with Article 5(4) of the Treaty on European Union, this Regulation does not go beyond what is necessary to achieve the objectives pursued, |
HAS ADOPTED THIS REGULATION:
Article 1
The autonomous Common Customs Tariff duties for the agricultural and industrial products listed in Annex I are hereby suspended.
Article 2
1. The Commission may at any time review the suspensions for the products listed in Annex I in the following cases:
(a) at its own initiative;
(b) at the request of Member States.
2. The Commission shall review the suspensions in the year set out in Annex I.
Article 3
Where a declaration for release for free circulation is presented in respect of the products falling under the CN codes or TARIC codes listed in Annex II, the supplementary unit provided in that Annex shall be entered in the relevant field of that declaration.
Article 4
Regulation (EU) No 1344/2011 is hereby repealed.
Article 5
This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.
It shall apply from 1 January 2014.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
ANNEX I
(*) Suspension relating to a product in this Annex with regard to which the CN or TARIC code or the product description or the mandatory review date has been amended by Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products (OJ L 192, 1.7.2014, p. 9)
|
CN code |
TARIC |
Description |
Rate of autonomous duty |
Date foreseen for mandatory review |
|
ex071021 00 |
10 |
Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals (1) (2) |
0 % |
31.12.2018 |
|
ex071080 95 |
50 |
Bamboo shoots, frozen, not put up for retail sale |
0 % |
31.12.2018 |
|
ex071159 00 |
11 |
Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry (1) |
0 % |
31.12.2016 |
|
ex071232 00 ex071233 00 ex071239 00 |
10 10 31 |
Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale (1) (2) |
0 % |
31.12.2018 |
|
ex080410 00 |
30 |
Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries (1) |
0 % |
31.12.2018 |
|
ex081040 50 |
10 |
Cranberries of the species Vaccinium macrocarpon, fresh, for use in the manufacture (excluding packing) of products of drink or food industries (1) |
0 % |
31.12.2018 |
|
0811 90 50 0811 90 70 ex081190 95 |
70 |
Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter |
0 % |
31.12.2018 |
|
ex081190 95 |
20 |
Boysenberries, frozen, not containing added sugar, not put up for retail sale |
0 % |
31.12.2018 |
|
ex081190 95 |
30 |
Pineapple (Ananas comosus), in pieces, frozen |
0 % |
31.12.2018 |
|
ex081190 95 |
40 |
Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex151190 19 *ex151190 91 *ex151311 10 *ex151319 30 *ex151321 10 *ex151329 30 |
10 10 10 10 10 10 |
Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: — industrial monocarboxylic fatty acids of subheading 3823 19 10, — methyl esters of fatty acids of heading 2915 or 2916, — fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products, — fatty alcohols of subheading 2905 16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products, — stearic acid of subheading 3823 11 00 — goods of heading 3401 — fatty acids with high purity of heading 2915 for the manufacture of chemical products other than products of heading 3826 or — goods of heading 1516 (1) |
0 % |
31.12.2014 |
|
ex151590 99 |
92 |
Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid |
0 % |
31.12.2018 |
|
ex151620 96 |
20 |
Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process |
0 % |
31.12.2014 |
|
ex151790 99 |
10 |
Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 50 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO) |
0 % |
31.12.2016 |
|
ex190190 99 ex210690 98 |
39 45 |
Preparation in powder form containing by weight: — 15 % or more but not more than 35 % of wheat derived Maltodextrin, — 15 % or more but not more than 35 % of whey (milk serum), — 10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil, — 10 % or more but not more than 30 % of blended, aged spray dried cheese, — 5 % or more but not more than 15 % of buttermilk and — 0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid |
0 % |
31.12.2018 |
|
ex190230 10 ex190300 00 |
10 20 |
Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale |
0 % |
31.12.2018 |
|
ex200591 00 |
10 |
Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg |
0 % |
31.12.2018 |
|
ex200799 50 ex200799 50 |
81 91 |
Acerola puree concentrate, obtained by cooking: — of the Genus Malpighia spp., — with a sugar content by weight of more than 13 % but not more than 30 % for use in the manufacture of products of food and drink industry (1) |
9 % (3) |
31.12.2017 |
|
ex200799 50 ex200799 50 |
82 92 |
Acidified banana puree concentrate, obtained by cooking: — of the Genus Musa cavendish, — with a sugar content by weight of more than 13 % but not more than 30 % for use in the manufacture of products of food and drink industry (1) |
11,5 % (3) |
31.12.2017 |
|
ex200799 50 ex200799 50 ex200799 93 |
83 93 10 |
Mango puree concentrate, obtained by cooking: — of the Genus Mangifera spp., — with a sugar content by weight of not more than 30 % for use in the manufacture of products of food and drink industry (1) |
6 % (3) |
31.12.2017 |
|
ex200799 50 ex200799 50 |
84 94 |
Papaya puree concentrate, obtained by cooking: — of the Genus Carica spp., — with a sugar content by weight of more than 13 % but not more than 30 % for use in the manufacture of products of food and drink industry (1) |
7,8 % (3) |
31.12.2017 |
|
ex200799 50 ex200799 50 |
85 95 |
Guava puree concentrate, obtained by cooking: — of the Genus Psidium spp., — with a sugar content by weight of more than 13 % but not more than 30 % for use in the manufacture of products of food and drink industry (1) |
6 % (3) |
31.12.2017 |
|
ex200893 91 |
20 |
Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries (4) |
0 % |
31.12.2017 |
|
ex200899 48 |
94 |
Mango puree: — not from concentrate, — of the genus Mangifera, — of a Brix value of 14 or more, but not more than 20 used in the manufacture of products of drink industry (1) |
6 % |
31.12.2015 |
|
ex200899 49 ex200899 99 |
30 40 |
Seedless boysenberry puree not containing added spirit, whether or not containing added sugar |
0 % |
31.12.2014 |
|
ex200899 49 ex200899 99 |
70 11 |
Blanched vine leaves of the genus Karakishmish, in brine, containing by weight: — more than 6 % of salt concentration, — 0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate and — whether or not but not more than 2 000 mg/kg of sodium benzoate according CODEX STAN 192-1995 for use in the manufacture of stuffed vine leaves with rice (1) |
0 % |
31.12.2017 |
|
ex200941 92 ex200941 99 |
20 70 |
Pineapple juice: — not from concentrate, — of the genus Ananas, — of a Brix value of 11 or more but not more than 16, used in the manufacture of products of drink industry (1) |
8 % |
31.12.2015 |
|
ex200949 30 |
91 |
Pineapple juice, other than in powder form: — with a Brix value of more than 20 but not more than 67, — a value of more than EUR 30 per 100 kg net weight, — containing added sugars used in the manufacture of products of food or drink industry (1) |
0 % |
31.12.2014 |
|
ex200981 31 |
10 |
Cranberry juice concentrate: — of a Brix value of 40 or more but not more than 66, — in immediate packings of a content of 50 litres or more |
0 % |
31.12.2014 |
|
ex200989 79 |
20 |
Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packing of a content of 50 litres or more |
0 % |
31.12.2016 |
|
ex200989 79 |
30 |
Frozen acerola juice concentrate: — with a Brix value of more than 48 but not more than 67, — in immediate packings of a content of 50 litres or more |
0 % |
31.12.2018 |
|
ex200989 79 |
85 |
Acai berry juice concentrate: — of the species Euterpe oleracea, — frozen, — not sweetened, — not in powder form, — of a Brix value of 23 or more but not more than 32, in immediate packings of a content of 10 kg or more |
0 % |
31.12.2016 |
|
ex200989 99 |
93 |
Untreated frozen coconut water, in immediate packing of a content of 50 litres or more |
0 % |
31.12.2016 |
|
ex210610 20 |
10 |
Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate |
0 % |
31.12.2018 |
|
ex210610 20 |
20 |
Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form |
0 % |
31.12.2018 |
|
ex210690 92 |
45 |
Preparation containing by weight: — more than 30 % but not more than 35 % licorice extract, — more than 65 % but not more than 70 % tricaprylin, standardized by weight to 3 % or more but not more than 4 % glabridin |
0 % |
31.12.2016 |
|
ex220720 00 ex220720 00 ex382000 00 |
20 80 20 |
Feedstock consisting of by weight: — 88 % or more but not more than 92 % of Ethanol, — 2,2 % or more but not more than 2,7 % of Monoethylene glycol, — 1,0 % but not more than 1,3 % of Methylethylketone, — 0,36 % or more but not more than 0,40 % of anionic surfactant (ca.30 % active), — 0,0293 % or more but not more than 0,0396 % of methyl isopropylketone, — 0,0195 % or more but not more than 0,0264 % of 5 methyl-3-heptanone, — 10 ppm or more but not more than 12 ppm of Denatonium Benzoate (Bitrex), — Not more than 0,01 of Perfumes, — 6,5 % or more but not more than 8,0 % of water for use in the manufacture of screenwash concentrate and other de-icing preparations (1) |
0 % |
31.12.2018 |
|
ex251990 10 |
10 |
Fused magnesia with a purity by weight of 97 % or more |
0 % |
31.12.2016 |
|
ex270799 99 |
10 |
Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27 (1) |
0 % |
31.12.2018 |
|
ex271019 99 |
10 |
Catalytically hydroisomerized and dewaxed base oil comprising hydrogenated, highly isoparaffinic hydrocarbons, containing: — 90 % or more by weight of saturates, and — not more than 0,03 % by weight of sulphur, with a viscosity index of 120 or more. |
0 % |
31.12.2018 |
|
ex280450 90 |
10 |
Tellurium of a purity by weight of 99,99 % or more, but not more than 99,999 % by weight (CAS RN 13494-80-9) |
0 % |
31.12.2018 |
|
2804 70 00 |
Phosphorus |
0 % |
31.12.2018 |
|
|
ex280519 90 |
10 |
Lithium metal of a purity by weight of 99,7 % or more (CAS RN 7439-93-2) |
0 % |
31.12.2017 |
|
ex280530 10 |
10 |
Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium |
0 % |
31.12.2018 |
|
ex280530 90 ex280530 90 ex280530 90 |
45 55 65 |
Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more |
0 % |
31.12.2015 |
|
ex281119 80 |
10 |
Sulphamidic acid (CAS RN 5329-14-6) |
0 % |
31.12.2018 |
|
ex281119 80 |
20 |
Hydrogen iodide (CAS RN 10034-85-2) |
0 % |
31.12.2016 |
|
ex281119 80 |
30 |
Phosphorous acid (CAS RN 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an ingredient for production of additives used in poly(vinyl chloride) industry (1) |
0 % |
31.12.2017 |
|
ex281122 00 |
10 |
Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1) |
0 % |
31.12.2018 |
|
ex281122 00 |
30 |
Balls of porous white silica of a particle size of more than 1 μm for use in the manufacture of cosmetic products (1) |
0 % |
31.12.2016 |
|
ex281290 00 |
10 |
Nitrogen trifluoride (CAS RN 7783-54-2) |
0 % |
31.12.2018 |
|
ex281640 00 |
10 |
Barium hydroxide (CAS RN 17194-00-2) |
0 % |
31.12.2017 |
|
ex281810 91 |
10 |
Sintered corundum with micro crystalline structure, containing by weight: — 94 % or more, but not more than 98,5 % of α-Al2O3 (CAS RN 1344-28-1), — 2 % (± 1,5 %) of magnesium spinel (CAS RN 1309-48-4), — 1 % (± 0,6 %) of yttrium oxide (CAS RN 1314-36-9), and — either 2 % (± 1,2 %) of lanthanum oxide (CAS RN 1312-81-8) — or 2 % (± 1,2 %) of lanthanum oxide (CAS RN 1312-81-8) and neodymium oxide (CAS RN 1313-97-9) with less than 50 % of the total weight having a particle size of more than 10 mm |
0 % |
31.12.2015 |
|
ex281820 00 |
10 |
Activated alumina with a specific surface area of at least 350 m2/g |
0 % |
31.12.2014 |
|
ex281830 00 |
10 |
Aluminium hydroxide oxide in the form of pseudo-boehmite |
4 % |
31.12.2018 |
|
2819 10 00 |
Chromium trioxide (CAS RN 1333-82-0) |
0 % |
31.12.2016 |
|
|
ex281990 90 |
10 |
Dichromium trioxide for use in metallurgy (CAS RN 1308-38-9) (1) |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex282300 00 |
10 |
Titanium dioxide (CAS RN 13463-67-7): — of a purity by weight of 99,9 % or more, — with an average grain-size of 0,7 μm or more but not more than 2,1 μm |
0 % |
31.12.2017 |
|
ex282300 00 |
20 |
Titanium dioxide (CAS RN 13463-67-7) with a purity by weight of 99,7 % or more and containing by weight: — not more than 0,005 % of potassium and sodium combined (expressed as elemental sodium and elemental potassium), — not more than 0,01 % of phosphorus (expressed as elemental phosphorus), for use in the metallurgy (1) |
0 % |
31.12.2017 |
|
ex282510 00 |
10 |
Hydroxylammonium chloride (CAS RN 5470-11-1) |
0 % |
31.12.2017 |
|
ex282550 00 |
20 |
Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride |
0 % |
31.12.2018 |
|
ex282560 00 |
10 |
Zirconium dioxide (CAS RN 1314-23-4) |
0 % |
31.12.2017 |
|
ex282619 90 |
10 |
Tungsten hexafluoride with a purity of 99,9 % by weight or more (CAS RN 7783-82-6) |
0 % |
31.12.2015 |
|
ex282690 80 |
15 |
Lithium hexafluorophosphate (CAS RN 21324-40-3) |
0 % |
31.12.2016 |
|
ex282739 85 |
10 |
Copper monochloride of a purity by weight of 96 % or more but not more than 99 % (CAS RN 7758-89-6) |
0 % |
31.12.2018 |
|
ex282739 85 |
20 |
Antimony pentachloride of a purity by weight of 99 % or more (CAS RN 7647-18-9) |
0 % |
31.12.2016 |
|
ex282739 85 |
30 |
Manganese dichloride (CAS RN 7773-01-5) |
0 % |
31.12.2014 |
|
ex282739 85 |
40 |
Barium chloride dihydrate (CAS RN 10326-27-9) |
0 % |
31.12.2018 |
|
ex282749 90 |
10 |
Hydrated zirconium dichloride oxide |
0 % |
31.12.2018 |
|
ex283010 00 |
10 |
Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on the dry weight |
0 % |
31.12.2018 |
|
ex283329 80 |
20 |
Manganese sulphate monohydrate (CAS RN 10034-96-5) |
0 % |
31.12.2018 |
|
ex283329 80 |
30 |
Zirconium sulphate (CAS RN 14644-61-2) |
0 % |
31.12.2015 |
|
ex283510 00 |
10 |
Sodium hypophosphite monohydrate (CAS RN 10039-56-2) |
0 % |
31.12.2017 |
|
ex283510 00 |
20 |
Sodium hypophosphite (CAS RN 7681-53-0) |
0 % |
31.12.2018 |
|
ex283691 00 |
20 |
Lithium carbonate, containing one or more of the following impurities at the concentrations indicated: — 2 mg/kg or more of arsenic, — 200 mg/kg or more of calcium, — 200 mg/kg or more of chlorides, — 20 mg/kg or more of iron, — 150 mg/kg or more of magnesium, — 20 mg/kg or more of heavy metals, — 300 mg/kg or more of potassium, — 300 mg/kg or more of sodium, — 200 mg/kg or more of sulphates, determined according to the methods specified in the European Pharmacopœia |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex283699 17 |
20 |
Zirconium (IV) basic carbonate (CAS RN 57219-64-4) |
0 % |
31.12.2018 |
|
ex283719 00 |
20 |
Copper cyanide (CAS RN 544-92-3) |
0 % |
31.12.2018 |
|
ex283720 00 |
10 |
Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9) |
0 % |
31.12.2016 |
|
ex283720 00 |
20 |
Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5) |
0 % |
31.12.2017 |
|
ex283919 00 |
10 |
Disodium disilicate (CAS RN 13870-28-5) |
0 % |
31.12.2017 |
|
ex283990 00 |
20 |
Calcium silicate (CAS RN 1344-95-2) |
0 % |
31.12.2018 |
|
2841 30 00 |
Sodium dichromate (CAS RN 10588-01-9) |
0 % |
31.12.2018 |
|
|
ex284170 00 |
10 |
Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8) |
0 % |
31.12.2018 |
|
ex284180 00 |
10 |
Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5) |
0 % |
31.12.2017 |
|
ex284190 85 |
10 |
Lithium cobalt(III) oxide with a cobalt content of at least 59 % (CAS RN 12190-79-3) |
0 % |
31.12.2017 |
|
ex284190 85 |
20 |
Potassium titanium oxide in powder form with a purity of 99 % or more (CAS RN 12056-51-8) |
0 % |
31.12.2018 |
|
ex284210 00 |
10 |
Synthetic Beta Zeolite powder |
0 % |
31.12.2018 |
|
ex284210 00 |
20 |
Synthetic Chabasite Zeolite Powder |
0 % |
31.12.2014 |
|
ex284290 10 |
10 |
Sodium selenate (CAS RN 13410-01-0) |
0 % |
31.12.2014 |
|
ex284329 00 |
10 |
Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99,99 % by weight of the metal content, for the manufacture of silver oxide batteries (1) |
0 % |
31.12.2016 |
|
2845 10 00 |
Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0) |
0 % |
31.12.2018 |
|
|
2845 90 10 |
Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom) |
0 % |
31.12.2018 |
|
|
ex284590 90 |
10 |
Helium-3 (CAS RN 14762-55-1) |
0 % |
31.12.2016 |
|
ex284590 90 |
20 |
Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2) |
0 % |
31.12.2018 |
|
ex284590 90 |
30 |
(13C)Carbon monoxide (CAS RN 1641-69-6) |
0 % |
31.12.2016 |
|
ex284590 90 |
40 |
Iron boride enriched at a level of more than 95 % by weight with boron-10 (CAS RN 200513-39-9) |
0 % |
31.12.2018 |
|
ex284610 00 ex382490 97 |
10 48 |
Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight |
0 % |
31.12.2018 |
|
ex284610 00 |
20 |
Dicerium tricarbonate, whether or not hydrated (CAS RN 537-01-9) |
0 % |
31.12.2018 |
|
ex284610 00 |
30 |
Cerium lanthanum carbonate, whether or not hydrated |
0 % |
31.12.2018 |
|
ex284610 00 |
40 |
Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated |
0 % |
31.12.2014 |
|
2846 90 00 |
Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 00 |
0 % |
31.12.2018 |
|
|
ex284800 00 |
10 |
Phosphine (CAS RN 7803-51-2) |
0 % |
31.12.2018 |
|
ex285000 20 |
10 |
Silane (CAS RN 7803-62-5) |
0 % |
31.12.2018 |
|
ex285000 20 |
20 |
Arsine (CAS RN 7784-42-1) |
0 % |
31.12.2018 |
|
ex285000 20 |
30 |
Titanium nitride with a particle size of not more than 250 nm (CAS RN 25583-20-4) |
0 % |
31.12.2017 |
|
ex285000 20 |
40 |
Germanium tetrahydride (CAS RN 7782-65-2) |
0 % |
31.12.2016 |
|
ex285000 20 |
50 |
Sodium tetrahydroborate (CAS 16940-66-2) with: — a purity by weight of 98 % or more and — not more than 10ppm iron for use as an additive in the manufacture of oxygen barrier polymer articles (1) |
0 % |
31.12.2017 |
|
ex285000 60 |
10 |
Sodium azide (CAS RN 26628-22-8) |
0 % |
31.12.2018 |
|
ex285300 90 |
10 |
Chlorosulphonyl isocyanate (CAS RN 1189-71-5) |
0 % |
31.12.2016 |
|
ex290339 19 |
10 |
1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity not less than 99,0 % and containing not more than: — 0,25 % of Sec-butyl bromide — 0,06 % of n-butyl bromide — 0,06 % of n-propyl bromide |
0 % |
31.12.2018 |
|
ex290339 90 |
10 |
Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0) |
0 % |
31.12.2018 |
|
ex290339 90 |
15 |
Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0) |
0 % |
31.12.2016 |
|
ex290339 90 |
25 |
2,3,3,3-Tetrafluoroprop-1-ene (CAS RN 754-12-1) |
0 % |
31.12.2017 |
|
ex290339 90 |
30 |
Perfluoroethane (CAS RN 76-16-4) |
0 % |
31.12.2018 |
|
ex290339 90 |
40 |
1,1-Difluoroethane (CAS RN 75-37-6) |
0 % |
31.12.2018 |
|
ex290339 90 |
50 |
1,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
ex290339 90 |
75 |
Trans-1,3,3,3-tetrafluoroprop-1-ene (CAS RN 1645-83-6) |
0 % |
31.12.2018 |
|
ex290339 90 |
80 |
Hexafluoropropene (CAS RN 116-15-4) |
0 % |
31.12.2016 |
|
ex290339 90 |
85 |
(Perfluorobutyl) ethylene (CAS RN 19430-93-4) |
0 % |
31.12.2018 |
|
ex290339 90 |
87 |
1H-Perfluorohexane (CAS RN 355-37-3) |
0 % |
31.12.2018 |
|
ex290377 30 |
10 |
1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5) |
0 % |
31.12.2018 |
|
ex290377 90 |
10 |
Chlorotrifluoroethylene (CAS RN 79-38-9) |
0 % |
31.12.2016 |
|
ex290389 90 |
10 |
1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) |
0 % |
31.12.2018 |
|
ex290389 90 |
30 |
Octafluorocyclopentene (CAS RN 559-40-0) |
0 % |
31.12.2016 |
|
ex290389 90 |
40 |
Hexabromocyclododecane |
0 % |
31.12.2016 |
|
ex290389 90 |
50 |
Chlorocyclopentane (CAS RN 930-28-9) |
0 % |
31.12.2017 |
|
ex290399 90 |
20 |
1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9) |
0 % |
31.12.2018 |
|
ex290399 90 |
40 |
2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing: — 0,001 mg/kg or less of tetrachlorodibenzodioxines, — 0,001 mg/kg or less of tetrachlorodibenzofurans, — 0,2 mg/kg or less of tetrachlorobiphenyls |
0 % |
31.12.2018 |
|
ex290399 90 |
50 |
Fluorobenzene (CAS RN 462-06-6) |
0 % |
31.12.2018 |
|
ex290399 90 |
70 |
α,α,α′,α′-Tetrachloro-o-xylen (CAS RN 25641-99-0) |
0 % |
31.12.2015 |
|
ex290399 90 |
80 |
1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9) |
0 % |
31.12.2018 |
|
ex290399 90 |
85 |
2-Bromo-9H-fluorene (CAS RN 1133-80-8) |
0 % |
31.12.2018 |
|
ex290410 00 |
30 |
Sodium p-styrenesulphonate (CAS RN 2695-37-6) |
0 % |
31.12.2014 |
|
ex290410 00 |
50 |
Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8) |
0 % |
31.12.2014 |
|
ex290420 00 |
10 |
Nitromethane (CAS RN 75-52-5) |
0 % |
31.12.2015 |
|
ex290420 00 |
20 |
Nitroethane (CAS RN 79-24-3) |
0 % |
31.12.2015 |
|
ex290420 00 |
30 |
1-Nitropropane (CAS RN 108-03-2) |
0 % |
31.12.2015 |
|
ex290420 00 |
40 |
2-Nitropropane (CAS RN 79-46-9) |
0 % |
31.12.2014 |
|
ex290490 40 |
10 |
Trichloronitromethane, for the manufacture of goods of subheading 3808 92 (CAS RN 76-06-2) (1) |
0 % |
31.12.2014 |
|
ex290490 95 |
20 |
1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7) |
0 % |
31.12.2014 |
|
ex290490 95 |
30 |
Tosyl chloride (CAS RN 98-59-9) |
0 % |
31.12.2014 |
|
ex290490 95 |
40 |
4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2) |
0 % |
31.12.2017 |
|
ex290490 95 |
50 |
Ethanesulphonyl chloride (CAS RN 594-44-5) |
0 % |
31.12.2018 |
|
ex290511 00 |
10 |
Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex290519 00 |
11 |
Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN |
0 % |
31.12.2018 |
|
ex290519 00 |
20 |
Butyltitanate monohydrate, homopolymer (CAS RN 162303-51-7) |
0 % |
31.12.2018 |
|
ex290519 00 |
25 |
Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6) |
0 % |
31.12.2018 |
|
ex290519 00 |
30 |
2,6-Dimethylheptan-4-ol (CAS RN 108-82-7) |
0 % |
31.12.2018 |
|
ex290519 00 |
40 |
2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7) |
0 % |
31.12.2014 |
|
ex290519 00 |
70 |
Titanium tetrabutanolate (CAS RN 5593-70-4) |
0 % |
31.12.2017 |
|
ex290519 00 |
80 |
Titanium tetraisopropoxide (CAS RN 546-68-9) |
0 % |
31.12.2017 |
|
ex290519 00 |
85 |
Titanium tetraethanolate (CAS RN 3087-36-3) |
0 % |
31.12.2018 |
|
ex290529 90 |
10 |
3,5-Dimethylhex-1-yn-3-ol (CAS RN 107-54-0) |
0 % |
31.12.2014 |
|
ex290529 90 |
20 |
Dec-9-en-1-ol (CAS RN 13019-22-2) |
0 % |
31.12.2014 |
|
ex290529 90 |
30 |
Dodeca-8,10-dien-1-ol (CAS RN 33956-49-9) |
0 % |
31.12.2015 |
|
ex290539 95 |
10 |
Propane-1,3-diol (CAS RN 504-63-2) |
0 % |
31.12.2015 |
|
ex290539 95 |
20 |
Butane-1,2-diol (CAS RN 584-03-2) |
0 % |
31.12.2016 |
|
ex290539 95 |
30 |
2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7) |
0 % |
31.12.2016 |
|
ex290539 95 |
40 |
Decane-1,10-diol (CAS RN 112-47-0) |
0 % |
31.12.2017 |
|
ex290539 95 |
50 |
2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2) |
0 % |
31.12.2018 |
|
ex290549 00 |
10 |
Ethylidynetrimethanol (CAS RN 77-85-0) |
0 % |
31.12.2014 |
|
ex290559 98 |
20 |
2,2,2-Trifluoroethanol (CAS RN 75-89-8) |
0 % |
31.12.2014 |
|
2906 11 00 |
Menthol (CAS RN 1490-04-6) |
0 % |
31.12.2018 |
|
|
ex290619 00 |
10 |
Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8) |
0 % |
31.12.2018 |
|
ex290619 00 |
20 |
4,4′-Isopropylidenedicyclohexanol (CAS RN 80-04-6) |
0 % |
31.12.2018 |
|
ex290629 00 |
10 |
2,2′-(m-Phenylene)dipropan-2-ol (CAS RN 1999-85-5) |
0 % |
31.12.2014 |
|
ex290629 00 |
20 |
1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7) |
0 % |
31.12.2018 |
|
ex290629 00 |
30 |
2-Phenylethanol (CAS RN 60-12-8) |
0 % |
31.12.2017 |
|
ex290715 90 |
10 |
2-Naphthol (CAS RN 135-19-3) |
0 % |
31.12.2016 |
|
ex290719 90 |
10 |
2,3,5-Trimethylphenol (CAS RN 697-82-5) |
0 % |
31.12.2014 |
|
ex290719 90 |
20 |
Biphenyl-4-ol (CAS RN 92-69-3) |
0 % |
31.12.2018 |
|
ex290721 00 |
10 |
Resorcinol (CAS RN 108-46-3) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
ex290729 00 |
15 |
6,6′-Di-tert-butyl-4,4′-butylidenedi-m-cresol (CAS RN 85-60-9) |
0 % |
31.12.2018 |
|
ex290729 00 |
20 |
4,4′-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4) |
0 % |
31.12.2018 |
|
ex290729 00 |
30 |
4,4′,4″-Ethylidynetriphenol (CAS RN 27955-94-8) |
0 % |
31.12.2018 |
|
ex290729 00 |
35 |
4-[2-(4-Hydroxy-3-prop-2-enylphenyl)propan-2-yl]-2-prop-2-enylphenol (CAS RN 1745-89-7) |
0 % |
31.12.2016 |
|
ex290729 00 |
40 |
2,3,5-Trimethylhydroquinone (CAS RN 700-13-0) |
0 % |
31.12.2016 |
|
ex290729 00 |
45 |
2-Methylhydroquinone (CAS RN 95-71-6) |
0 % |
31.12.2016 |
|
ex290729 00 |
50 |
6,6′,6″-Tricyclohexyl-4,4′,4″-butane-1,1,3-triyltri (m-cresol) (CAS RN 111850-25-0) |
0 % |
31.12.2018 |
|
ex290729 00 |
55 |
Biphenyl-2,2′-diol (CAS RN 1806-29-7) |
0 % |
31.12.2017 |
|
ex290729 00 |
70 |
2,2′,2″,6,6′,6″-Hexa-tert-butyl-α,α′,α″-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2) |
0 % |
31.12.2018 |
|
ex290729 00 |
85 |
Phloroglucinol whether or not hydrated |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex290819 00 |
10 |
Pentafluorophenol (CAS RN 771-61-9) |
0 % |
31.12.2018 |
|
ex290819 00 |
20 |
4,4′-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) |
0 % |
31.12.2018 |
|
ex290899 00 |
30 |
4-Nitrophenol (CAS RN 100-02-7) |
0 % |
31.12.2018 |
|
ex290899 00 |
40 |
4,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4) |
0 % |
31.12.2017 |
|
ex290919 90 |
20 |
Bis(2-chloroethyl) ether (CAS RN 111-44-4) |
0 % |
31.12.2018 |
|
ex290919 90 |
30 |
Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more |
0 % |
31.12.2018 |
|
ex290919 90 |
50 |
3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9) |
0 % |
31.12.2016 |
|
ex290919 90 |
60 |
1-Methoxyheptafluoropropane (CAS RN 375-03-1) |
0 % |
31.12.2018 |
|
ex290920 00 |
10 |
8-Methoxycedrane (CAS RN 19870-74-7) |
0 % |
31.12.2016 |
|
ex290930 38 |
10 |
Bis(pentabromophenyl) ether (CAS RN 1163-19-5) |
0 % |
31.12.2018 |
|
ex290930 38 |
20 |
1,1′-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2) |
0 % |
31.12.2016 |
|
ex290930 90 |
10 |
2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7) |
0 % |
31.12.2014 |
|
ex290930 90 |
20 |
1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1) |
0 % |
31.12.2014 |
|
ex290930 90 |
30 |
3,4,5-Trimethoxytoluene (CAS RN 6443-69-2) |
0 % |
31.12.2015 |
|
ex290950 00 |
10 |
4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9) |
0 % |
31.12.2018 |
|
ex290950 00 |
20 |
Ubiquinol (CAS RN 992-78-9) |
0 % |
31.12.2015 |
|
ex290960 00 |
10 |
Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3) |
0 % |
31.12.2018 |
|
ex290960 00 |
20 |
1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3) |
0 % |
31.12.2016 |
|
ex291090 00 |
15 |
1,2-Epoxycyclohexane (CAS RN 286-20-4) |
0 % |
31.12.2018 |
|
ex291090 00 |
20 |
2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4) |
0 % |
31.12.2018 |
|
ex291090 00 |
30 |
2,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5) |
0 % |
31.12.2018 |
|
ex291090 00 |
80 |
Allyl glycidyl ether (CAS RN 106-92-3) |
0 % |
31.12.2016 |
|
ex291229 00 |
40 |
(2E,4E,6E,8E,10E,12E)-2,7,11-Trimethyl-13-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8,10,12-tridecahexaenal (CAS RN 1638-05-7) |
0 % |
31.12.2016 |
|
ex291229 00 |
50 |
4-Isobutylbenzaldehyde (CAS RN 40150-98-9) |
0 % |
31.12.2017 |
|
ex291229 00 |
60 |
3,4-Dimethylbenzaldehyde (CAS RN 5973-71-7) |
0 % |
31.12.2018 |
|
ex291229 00 |
70 |
4-tert-Butylbenzaldehyde (CAS RN 939-97-9) |
0 % |
31.12.2018 |
|
ex291229 00 |
80 |
4-Isopropylbenzaldehyde (CAS RN 122-03-2) |
0 % |
31.12.2018 |
|
ex291249 00 |
10 |
3-Phenoxybenzaldehyde (CAS RN 39515-51-0) |
0 % |
31.12.2018 |
|
ex291249 00 |
20 |
4-Hydroxybenzaldehyde (CAS RN 123-08-0) |
0 % |
31.12.2017 |
|
ex291249 00 |
30 |
Salicylaldehyde (CAS RN 90-02-8) |
0 % |
31.12.2015 |
|
ex291419 90 |
20 |
Heptan-2-one (CAS RN 110-43-0) |
0 % |
31.12.2017 |
|
ex291419 90 |
30 |
3-Methylbutanone (CAS RN 563-80-4) |
0 % |
31.12.2017 |
|
ex291419 90 |
40 |
Pentan-2-one (CAS RN 107-87-9) |
0 % |
31.12.2017 |
|
ex291429 00 |
20 |
Cyclohexadec-8-enone (CAS RN 3100-36–5) |
0 % |
31.12.2018 |
|
ex291429 00 |
30 |
(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1) |
0 % |
31.12.2015 |
|
ex291429 00 |
40 |
Camphor |
0 % |
31.12.2018 |
|
ex291429 00 |
50 |
trans-β-Damascone (CAS RN 23726-91-2) |
0 % |
31.12.2016 |
|
ex291439 00 |
30 |
Benzophenone (CAS RN 119-61-9) |
0 % |
31.12.2017 |
|
ex291439 00 |
50 |
4-Phenylbenzophenone (CAS RN 2128-93-0) |
0 % |
31.12.2018 |
|
ex291439 00 |
60 |
4-Methylbenzophenone (CAS RN 134-84-9) |
0 % |
31.12.2018 |
|
ex291439 00 |
70 |
Benzil (CAS RN 134-81-6) |
0 % |
31.12.2017 |
|
ex291439 00 |
80 |
4′-Methylacetophenone (CAS RN 122-00-9) |
0 % |
31.12.2017 |
|
ex291450 00 |
20 |
3′-Hydroxyacetophenone (CAS RN 121-71-1) |
0 % |
31.12.2015 |
|
ex291450 00 |
25 |
4′-Methoxyacetophenone (CAS RN 100-06-1) |
0 % |
31.12.2018 |
|
ex291450 00 |
30 |
2′-Hydroxyacetophenone (CAS RN 118-93-4) |
0 % |
31.12.2018 |
|
ex291450 00 |
36 |
2,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5) |
0 % |
31.12.2018 |
|
ex291450 00 |
40 |
4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2) |
0 % |
31.12.2016 |
|
ex291450 00 |
45 |
3,4-Dihydroxybenzophenone (CAS RN 10425-11-3) |
0 % |
31.12.2017 |
|
ex291450 00 |
55 |
2,2',4,4'-Tetrahydroxybenzophenone (CAS RN 131-55-5) |
0 % |
31.12.2018 |
|
ex291450 00 |
60 |
2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8) |
0 % |
31.12.2017 |
|
ex291450 00 |
70 |
16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2) |
0 % |
31.12.2017 |
|
ex291450 00 |
80 |
2′,6′-Dihydroxyacetophenone (CAS RN 699-83-2) |
0 % |
31.12.2018 |
|
ex291469 90 |
10 |
2-Ethylanthraquinone (CAS RN 84-51-5) |
0 % |
31.12.2018 |
|
ex291469 90 |
20 |
2-Pentylanthraquinone (CAS RN 13936-21-5) |
0 % |
31.12.2014 |
|
ex291469 90 |
30 |
1,4-Dihydroxyanthraquinone (CAS RN 81-64-1) |
0 % |
31.12.2018 |
|
ex291469 90 |
40 |
p-Benzoquinone (CAS RN 106-51-4) |
0 % |
31.12.2016 |
|
ex291470 00 |
20 |
2,4′-Difluorobenzophenone (CAS RN 342-25-6) |
0 % |
31.12.2017 |
|
ex291470 00 |
40 |
Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8) |
0 % |
31.12.2018 |
|
ex291470 00 |
50 |
3′-Chloropropiophenone (CAS RN 34841-35-5) |
0 % |
31.12.2018 |
|
ex291470 00 |
60 |
4′-tert-Butyl-2′,6′-dimethyl-3′,5′-dinitroacetophenone (CAS RN 81-14-1) |
0 % |
31.12.2015 |
|
ex291470 00 |
70 |
4-Chloro-4′-hydroxybenzophenone (CAS RN 42019-78-3) |
0 % |
31.12.2016 |
|
ex291470 00 |
80 |
Tetrachloro-p-benzoquinone (CAS RN 118-75-2) |
0 % |
31.12.2018 |
|
ex291529 00 |
10 |
Antimony triacetate (CAS RN 6923-52-0) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
ex291539 00 |
25 |
2-Methylcyclohexyl acetate (CAS RN 5726-19-2) |
0 % |
31.12.2018 |
|
ex291539 00 |
40 |
tert-Butyl acetate (CAS RN 540-88-5) |
0 % |
31.12.2018 |
|
ex291539 00 |
50 |
3-Acetylphenyl acetate (CAS RN 2454-35-5) |
0 % |
31.12.2014 |
|
ex291539 00 |
60 |
Dodec-8-enyl acetate (CAS RN 28079-04-1) |
0 % |
31.12.2015 |
|
ex291539 00 |
65 |
Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4) |
0 % |
31.12.2015 |
|
ex291539 00 |
70 |
Dodec-9-enyl acetate (CAS RN 16974-11-1) |
0 % |
31.12.2015 |
|
ex291539 00 |
75 |
Isobornyl acetate (CAS RN 125-12-2) |
0 % |
31.12.2016 |
|
ex291539 00 |
80 |
1-Phenylethyl acetate (CAS RN 93-92-5) |
0 % |
31.12.2016 |
|
ex291539 00 |
85 |
2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5) |
0 % |
31.12.2018 |
|
ex291560 19 |
10 |
Ethyl butyrate (CAS RN 105-54-4) |
0 % |
31.12.2017 |
|
ex291590 70 |
30 |
3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5) |
0 % |
31.12.2017 |
|
ex291590 70 |
40 |
Nonanoic acid (pelargonic acid) (CAS RN 112-05-0) |
0 % |
31.12.2018 |
|
ex291590 70 |
50 |
Allyl heptanoate (CAS RN 142-19-8) |
0 % |
31.12.2014 |
|
ex291590 70 |
55 |
Triethyl orthoformate (CAS RN 122-51-0) |
0 % |
31.12.2018 |
|
ex291590 70 |
60 |
Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0) |
0 % |
31.12.2015 |
|
ex291590 70 |
70 |
Cobalt borate neodecanoate complexes, with a purity by weight of 92 % or more (CAS RN 68457-13-6) |
0 % |
31.12.2016 |
|
ex291590 70 |
75 |
2,2-Dimethylbutyryl chloride (CAS RN 5856-77-9) |
0 % |
31.12.2017 |
|
ex291590 70 |
80 |
Ethyl difluoroacetate (CAS RN 454-31-9) |
0 % |
31.12.2016 |
|
ex291612 00 |
10 |
2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6) |
0 % |
31.12.2018 |
|
ex291612 00 |
40 |
2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2) |
0 % |
31.12.2018 |
|
ex291612 00 |
70 |
2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3) |
0 % |
31.12.2017 |
|
ex291613 00 |
10 |
Hydroxyzinc methacrylate powder (CAS RN 63451-47-8) |
0 % |
31.12.2014 |
|
ex291613 00 |
20 |
Zinc dimethacrylate, in the form of powder (CAS RN 13189-00-9) |
0 % |
31.12.2018 |
|
ex291614 00 |
10 |
2,3-Epoxypropyl methacrylate (CAS RN 106-91-2) |
0 % |
31.12.2018 |
|
ex291614 00 |
20 |
Ethyl methacrylate (CAS RN 97-63-2) |
0 % |
31.12.2018 |
|
ex291619 95 |
20 |
Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1) |
0 % |
31.12.2018 |
|
ex291619 95 |
40 |
Sorbic acid for use in the manufacture of animal feeds (CAS RN 110-44-1) (1) |
0 % |
31.12.2018 |
|
ex291620 00 |
50 |
Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6) |
0 % |
31.12.2018 |
|
ex291620 00 |
60 |
3-Cyclohexylpropionic acid (CAS RN 701-97-3) |
0 % |
31.12.2015 |
|
ex291631 00 |
10 |
Benzyl benzoate (CAS RN 120-51-4) |
0 % |
31.12.2016 |
|
ex291639 90 |
10 |
2,3,4,5-Tetrafluorobenzoic acid (CAS RN 1201-31-6) |
0 % |
31.12.2016 |
|
ex291639 90 |
15 |
2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3) |
0 % |
31.12.2016 |
|
ex291639 90 |
20 |
3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6) |
3,6 % |
31.12.2018 |
|
ex291639 90 |
25 |
2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8) |
0 % |
31.12.2015 |
|
ex291639 90 |
30 |
2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1) |
0 % |
31.12.2015 |
|
ex291639 90 |
35 |
Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9) |
0 % |
31.12.2018 |
|
ex291639 90 |
38 |
6-Bromonaphthalene-2-carboxylic acid (CAS RN 5773-80-8) |
0 % |
31.12.2018 |
|
ex291639 90 |
45 |
2-Chlorobenzoic acid (CAS RN 118-91-2) |
0 % |
31.12.2016 |
|
ex291639 90 |
48 |
3-Fluorobenzoyl chloride (CAS RN 1711-07-5) |
0 % |
31.12.2018 |
|
ex291639 90 |
50 |
3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1) |
0 % |
31.12.2018 |
|
ex291639 90 |
55 |
4-tert-Butylbenzoic acid (CAS RN 98-73-7) |
0 % |
31.12.2017 |
|
ex291639 90 |
60 |
4-Ethylbenzoyl chloride (CAS RN 16331-45-6) |
0 % |
31.12.2018 |
|
ex291639 90 |
70 |
Ibuprofen (INN) (CAS RN 15687-27-1) |
0 % |
31.12.2018 |
|
ex291639 90 |
75 |
m-Toluic acid (CAS RN 99-04-7) |
0 % |
31.12.2017 |
|
ex291639 90 |
85 |
(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0) |
0 % |
31.12.2017 |
|
ex291711 00 |
20 |
Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1) |
0 % |
31.12.2018 |
|
ex291711 00 |
30 |
Cobalt oxalate (CAS RN 814-89-1) |
0 % |
31.12.2014 |
|
ex291719 10 |
10 |
Dimethyl malonate (CAS RN 108-59-8) |
0 % |
31.12.2014 |
|
ex291719 10 |
20 |
Diethyl malonate (CAS RN 105-53-3) |
0 % |
31.12.2017 |
|
ex291719 90 |
15 |
Dimethyl but-2-ynedioate (CAS RN 762-42-5) |
0 % |
31.12.2018 |
|
ex291719 90 |
20 |
Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate (CAS RN 23386-52-9) |
0 % |
31.12.2018 |
|
ex291719 90 |
25 |
n-Dodecenyl succinic anhydride (CAS RN 19780-11-1) |
0 % |
31.12.2018 |
|
ex291719 90 |
30 |
Ethylene brassylate (CAS RN 105-95-3) |
0 % |
31.12.2014 |
|
ex291719 90 |
50 |
Tetradecanedioic acid (CAS RN 821-38-5) |
0 % |
31.12.2015 |
|
ex291719 90 |
70 |
Itaconic acid (CAS RN 97-65-4) |
0 % |
31.12.2018 |
|
ex291720 00 |
30 |
1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5) |
0 % |
31.12.2018 |
|
ex291720 00 |
40 |
3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6) |
0 % |
31.12.2018 |
|
ex291734 00 |
10 |
Diallyl phthalate (CAS RN 131-17-9) |
0 % |
31.12.2018 |
|
ex291739 95 |
20 |
Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0) |
0 % |
31.12.2015 |
|
ex291739 95 |
30 |
Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7) |
0 % |
31.12.2015 |
|
ex291739 95 |
40 |
Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5) |
0 % |
31.12.2018 |
|
ex291816 00 |
20 |
Calcium digluconate monohydrate (CAS RN 66905-23-5) for use in the manufacture of calcium gluconate lactate (CAS RN 11116-97-5) (1) |
0 % |
31.12.2018 |
|
ex291819 98 |
20 |
L-Malic acid (CAS RN 97-67-6) |
0 % |
31.12.2018 |
|
ex291829 00 |
10 |
Monohydroxynaphthoic acids |
0 % |
31.12.2018 |
|
ex291829 00 |
35 |
Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9) |
0 % |
31.12.2017 |
|
ex291829 00 |
50 |
Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2) |
0 % |
31.12.2018 |
|
ex291829 00 |
60 |
Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3) |
0 % |
31.12.2016 |
|
ex291830 00 |
30 |
Methyl-2-benzoylbenzoate (CAS RN 606-28-0) |
0 % |
31.12.2018 |
|
ex291830 00 |
50 |
Ethyl acetoacetate (CAS RN 141-97-9) |
0 % |
31.12.2017 |
|
ex291899 90 |
10 |
3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0) |
0 % |
31.12.2018 |
|
ex291899 90 |
15 |
Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8) |
0 % |
31.12.2017 |
|
ex291899 90 |
20 |
Methyl 3-methoxyacrylate (CAS RN 5788-17-0) |
0 % |
31.12.2014 |
|
ex291899 90 |
25 |
Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0) |
0 % |
31.12.2018 |
|
ex291899 90 |
30 |
Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2) |
0 % |
31.12.2018 |
|
ex291899 90 |
40 |
trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6) |
0 % |
31.12.2018 |
|
ex291899 90 |
50 |
Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0) |
0 % |
31.12.2018 |
|
ex291899 90 |
60 |
3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2) |
0 % |
31.12.2018 |
|
ex291899 90 |
70 |
Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8) |
0 % |
31.12.2014 |
|
ex291899 90 |
80 |
Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (CAS RN 62476-59-9) |
0 % |
31.12.2016 |
|
ex291990 00 |
10 |
2,2′-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) |
0 % |
31.12.2018 |
|
ex291990 00 |
30 |
Aluminium hydroxybis[2,2′-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5) |
0 % |
31.12.2018 |
|
ex291990 00 |
40 |
Tri-n-hexylphosphate (CAS RN 2528-39-4) |
0 % |
31.12.2018 |
|
ex291990 00 |
50 |
Triethyl phosphate (CAS RN 78-40-0) |
0 % |
31.12.2016 |
|
ex291990 00 |
60 |
Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5) |
0 % |
31.12.2018 |
|
ex292019 00 |
10 |
Fenitrothion (ISO) (CAS RN 122-14-5) |
0 % |
31.12.2018 |
|
ex292019 00 |
20 |
Tolclofos-methyl (ISO) (CAS RN 57018-04-9) |
0 % |
31.12.2018 |
|
ex292090 10 |
10 |
Diethyl sulphate (CAS RN 64-67-5) |
0 % |
31.12.2018 |
|
ex292090 10 |
20 |
Diallyl 2,2′-oxydiethyl dicarbonate (CAS RN 142-22-3) |
0 % |
31.12.2018 |
|
ex292090 10 |
40 |
Dimethyl carbonate (CAS RN 616-38-6) |
0 % |
31.12.2018 |
|
ex292090 10 |
50 |
Di-tert-butyl dicarbonate (CAS RN 24424-99-5) |
0 % |
31.12.2018 |
|
ex292090 10 |
60 |
2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1) |
0 % |
31.12.2017 |
|
2920 90 30 |
Trimethyl phosphite (CAS RN 121-45-9) |
0 % |
31.12.2018 |
|
|
2920 90 40 |
Triethyl phosphite (CAS RN 122-52-1) |
0 % |
31.12.2016 |
|
|
ex292090 85 |
10 |
O,O′-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6) |
0 % |
31.12.2018 |
|
ex292090 85 |
20 |
Tris(methylphenyl)phosphite (CAS RN 25586-42-9) |
0 % |
31.12.2015 |
|
ex292090 85 |
30 |
2,2′-[[3,3′,5,5′-Tetrakis(1,1-dimethylethyl)[1,1′-biphenyl]-2,2′-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine], (CAS RN 138776-88-2) |
0 % |
31.12.2015 |
|
ex292090 85 |
40 |
Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8) |
0 % |
31.12.2015 |
|
ex292090 85 |
50 |
Fosetyl-aluminium (CAS RN 39148-24-8) |
0 % |
31.12.2018 |
|
ex292090 85 |
60 |
Bis(neopentylglycolato)diboron (CAS RN 201733-56-4) |
0 % |
31.12.2018 |
|
ex292119 50 ex292990 00 |
10 20 |
Diethylamino-triethoxysilane (CAS RN 35077-00-0) |
0 % |
31.12.2014 |
|
ex292119 60 |
10 |
2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9) |
0 % |
31.12.2017 |
|
ex292119 99 |
20 |
Ethyl(2-methylallyl)amine (CAS RN 18328-90-0) |
0 % |
31.12.2018 |
|
ex292119 99 |
30 |
Allylamine (CAS RN 107-11-9) |
0 % |
31.12.2018 |
|
ex292119 99 |
60 |
Tetrakis(ethylmethylamino) zirconium (IV), (CAS RN 175923-04-3) |
0 % |
31.12.2018 |
|
ex292119 99 |
70 |
N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8) |
0 % |
31.12.2017 |
|
ex292129 00 |
20 |
Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0) |
0 % |
31.12.2018 |
|
ex292129 00 |
30 |
Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1) |
0 % |
31.12.2018 |
|
ex292129 00 |
40 |
Decamethylenediamine (CAS RN 646-25-3) |
0 % |
31.12.2015 |
|
ex292129 00 |
50 |
N′-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine, (CAS RN 6711-48-4) |
0 % |
31.12.2016 |
|
ex292130 99 |
30 |
1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6) |
0 % |
31.12.2015 |
|
ex292130 99 |
40 |
Cyclopropylamin (CAS RN 765-30-0) |
0 % |
31.12.2017 |
|
ex292142 00 |
15 |
4-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2) |
0 % |
31.12.2018 |
|
ex292142 00 |
20 |
3-Chloroaniline (CAS RN 108-42-9) |
0 % |
31.12.2018 |
|
ex292142 00 |
25 |
Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5) |
0 % |
31.12.2018 |
|
ex292142 00 |
30 |
4-Nitroaniline (CAS RN 100-01-6) |
0 % |
31.12.2018 |
|
ex292142 00 |
35 |
2-Nitroaniline (CAS RN 88-74-4) |
0 % |
31.12.2018 |
|
ex292142 00 |
45 |
2,4,5-Trichloroaniline (CAS RN 636-30-6) |
0 % |
31.12.2018 |
|
ex292142 00 |
50 |
3-Aminobenzenesulfonic acid (CAS RN 121-47-1) |
0 % |
31.12.2018 |
|
ex292142 00 |
70 |
2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2) |
0 % |
31.12.2014 |
|
ex292142 00 |
80 |
4-Chloro-2-nitroaniline (CAS RN 89-63-4) |
0 % |
31.12.2018 |
|
ex292142 00 |
82 |
2-Chloro-4-nitroaniline (CAS RN 121-87-9) |
0 % |
31.12.2015 |
|
ex292142 00 |
85 |
3,5-Dichloroaniline (CAS RN 626-43-7) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex292142 00 |
86 |
2,5-Dichloroaniline (CAS RN 95-82-9) |
0 % |
31.12.2017 |
|
ex292142 00 |
87 |
N-Methylaniline (CAS RN 100-61-8) |
0 % |
31.12.2017 |
|
ex292142 00 |
88 |
3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0) |
0 % |
31.12.2017 |
|
ex292143 00 |
20 |
4-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7) |
0 % |
31.12.2018 |
|
ex292143 00 |
30 |
3-Nitro-p-toluidine (CAS RN 119-32-4) |
0 % |
31.12.2018 |
|
ex292143 00 |
40 |
4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8) |
0 % |
31.12.2018 |
|
ex292143 00 |
50 |
4-Aminobenzotrifluoride (CAS RN 455-14-1) |
0 % |
31.12.2015 |
|
ex292143 00 |
60 |
3-Aminobenzotrifluoride (CAS RN 98-16-8) |
0 % |
31.12.2015 |
|
ex292143 00 |
70 |
N-Ethyl-m-toluidine (CAS RN 102-27-2) |
0 % |
31.12.2016 |
|
ex292143 00 |
80 |
6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6) |
0 % |
31.12.2017 |
|
ex292144 00 |
20 |
Diphenylamine (CAS RN 122-39-4) |
0 % |
31.12.2018 |
|
ex292145 00 |
10 |
Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) |
0 % |
31.12.2014 |
|
ex292145 00 |
20 |
2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6) |
0 % |
31.12.2018 |
|
ex292145 00 |
40 |
1-Naphthylamine (CAS RN 134-32-7) |
0 % |
31.12.2014 |
|
ex292145 00 |
50 |
7-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6) |
0 % |
31.12.2018 |
|
ex292149 00 |
20 |
Pendimethalin (ISO) (CAS RN 40487-42-1) |
3,5 % |
31.12.2018 |
|
ex292149 00 |
40 |
N-1-Naphthylaniline (CAS RN 90-30-2) |
0 % |
31.12.2018 |
|
ex292149 00 |
50 |
3,4-Xylidine (CAS RN 95-64-7) |
0 % |
31.12.2018 |
|
ex292149 00 |
60 |
N-Benzyl-N-ethylaniline (CAS RN 92-59-1) |
0 % |
31.12.2014 |
|
▼M1 ————— |
||||
|
ex292149 00 |
80 |
4-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5) |
0 % |
31.12.2015 |
|
ex292149 00 |
85 |
4-Isopropylaniline (CAS RN 99-88-7) |
0 % |
31.12.2017 |
|
ex292151 19 |
20 |
Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight |
0 % |
31.12.2018 |
|
ex292151 19 |
30 |
2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9) |
0 % |
31.12.2018 |
|
ex292151 19 |
40 |
p-Phenylenediamine (CAS RN 106-50-3) |
0 % |
31.12.2016 |
|
ex292151 19 |
50 |
Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene |
0 % |
31.12.2014 |
|
ex292151 19 |
60 |
2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1) |
0 % |
31.12.2018 |
|
ex292159 90 |
10 |
Mixture of isomers of 3,5-diethyltoluenediamine |
0 % |
31.12.2018 |
|
ex292159 90 |
30 |
3,3′-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9) |
0 % |
31.12.2017 |
|
ex292159 90 |
40 |
4,4′-Diaminostilbene-2,2′-disulphonic acid (CAS RN 81-11-8) |
0 % |
31.12.2018 |
|
ex292159 90 |
50 |
N-Ethyl-N′,N′-dimethyl-N-phenyl-ethylene-1,2-diamine (CAS RN 27692-91-7) |
0 % |
31.12.2014 |
|
ex292159 90 |
60 |
(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8) |
0 % |
31.12.2017 |
|
ex292219 85 |
20 |
2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9) |
0 % |
31.12.2017 |
|
ex292219 85 |
25 |
Titanium bis(triethanolamine)diisopropoxide (CAS RN 36673-16-2) |
0 % |
31.12.2017 |
|
ex292219 85 |
30 |
N,N,N′,N′-Tetramethyl-2,2′-oxybis(ethylamine) (CAS RN 3033-62-3) |
0 % |
31.12.2018 |
|
ex292219 85 |
40 |
2-(Dimethylamino)ethyl benzoate (CAS RN 2208-05-1) |
0 % |
31.12.2014 |
|
ex292219 85 |
45 |
2-[2-Hydroxyethyl(octadecyl)amino]ethanol (CAS RN 10213-78-2) |
0 % |
31.12.2016 |
|
ex292219 85 |
50 |
2-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0) |
0 % |
31.12.2018 |
|
ex292219 85 |
60 |
N,N,N′-trimethyl-N′-(2-hydroxy-ethyl) 2,2′-oxybis(ethylamine), (CAS RN 83016-70-0) |
0 % |
31.12.2018 |
|
ex292219 85 |
65 |
trans-4-Aminocyclohexanol (CAS RN 27489-62-9) |
0 % |
31.12.2018 |
|
ex292219 85 |
70 |
D-(-)-threo-2-amino-1-(p-nitrophenyl)propane-1,3-diol (CAS RN 716-61-0) |
0 % |
31.12.2016 |
|
ex292219 85 |
75 |
2-Ethoxyethylamine (CAS RN 110-76-9) |
0 % |
31.12.2018 |
|
ex292219 85 |
80 |
N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine, (CAS RN 189253-72-3) |
0 % |
31.12.2014 |
|
ex292219 85 |
85 |
(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0) |
0 % |
31.12.2018 |
|
ex292221 00 |
10 |
2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2) |
0 % |
31.12.2018 |
|
ex292221 00 |
30 |
6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7) |
0 % |
31.12.2014 |
|
ex292221 00 |
40 |
7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5) |
0 % |
31.12.2018 |
|
ex292221 00 |
50 |
Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate, (CAS RN 5460-09-3) |
0 % |
31.12.2014 |
|
ex292221 00 |
60 |
4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0) |
0 % |
31.12.2018 |
|
ex292229 00 |
20 |
3-Aminophenol (CAS RN 591-27-5) |
0 % |
31.12.2018 |
|
ex292229 00 |
25 |
5-Amino-o-cresol (CAS RN 2835-95-2) |
0 % |
31.12.2018 |
|
ex292229 00 |
45 |
Anisidines |
0 % |
31.12.2018 |
|
ex292229 00 |
55 |
3-Amino-4-hydroxybenzenesulphonic acid (CAS RN 98-37-3) |
0 % |
31.12.2014 |
|
ex292229 00 |
65 |
4-Trifluoromethoxyaniline (CAS RN 461-82-5) |
0 % |
31.12.2014 |
|
ex292229 00 |
70 |
4-Nitro-o-anisidine (CAS RN 97-52-9) |
0 % |
31.12.2018 |
|
ex292229 00 |
75 |
4-(2-Aminoethyl)phenol (CAS RN 51-67-2) |
0 % |
31.12.2015 |
|
ex292229 00 |
80 |
3-Diethylaminophenol (CAS RN 91-68-9) |
0 % |
31.12.2018 |
|
ex292229 00 |
85 |
4-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6) |
0 % |
31.12.2018 |
|
ex292239 00 |
10 |
1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts |
0 % |
31.12.2018 |
|
ex292239 00 |
20 |
2-Amino-5-chlorobenzophenone (CAS RN 719-59-5) |
0 % |
31.12.2015 |
|
ex292239 00 |
70 |
p-[(2-Chloroethyl)ethylamino]benzaldehyde (CAS RN 2643-07-4) |
0 % |
31.12.2016 |
|
ex292243 00 |
10 |
Anthranilic acid (CAS RN 118-92-3) |
0 % |
31.12.2018 |
|
ex292249 85 |
10 |
Ornithine aspartate (INNM) (CAS RN 3230-94-2) |
0 % |
31.12.2018 |
|
ex292249 85 |
15 |
DL-Aspartic acid used for the manufacture of food-integrators, (CAS RN 617-45-8) (1) |
0 % |
31.12.2014 |
|
ex292249 85 |
20 |
3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0) |
0 % |
31.12.2017 |
|
ex292249 85 |
40 |
Norvaline |
0 % |
31.12.2018 |
|
ex292249 85 |
45 |
Glycine (CAS RN 56-40-6) |
0 % |
31.12.2015 |
|
ex292249 85 |
50 |
D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9) |
0 % |
31.12.2014 |
|
ex292249 85 |
60 |
Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3) |
0 % |
31.12.2017 |
|
ex292249 85 |
70 |
2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3) |
0 % |
31.12.2018 |
|
ex292249 85 |
80 |
12-Aminododecanoic acid (CAS RN 693-57-2) |
0 % |
31.12.2018 |
|
ex292250 00 |
20 |
1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride, (CAS RN 130198-05-9) |
0 % |
31.12.2014 |
|
ex292250 00 |
70 |
2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate |
0 % |
31.12.2018 |
|
ex292390 00 |
10 |
Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide |
0 % |
31.12.2018 |
|
ex292390 00 |
25 |
Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN 117342-25-3) |
0 % |
31.12.2018 |
|
ex292390 00 |
45 |
Tetrabutylammonium hydroxide in the form of an aqueous solution containing 55 % (± 1 %) by weight of tetrabutylammonium hydroxide, (CAS RN 2052-49-5) |
0 % |
31.12.2014 |
|
ex292390 00 |
70 |
Tetrapropylammonium hydroxide, in the form of an aqueous solution containing: — 40 % (± 2 %) by weight of tetrapropylammonium hydroxide, — 0,3 % by weight or less of carbonate, — 0,1 % by weight or less of tripropylamine, — 500 mg/kg or less of bromide and — 25 mg/kg or less of potassium and sodium taken together |
0 % |
31.12.2018 |
|
ex292390 00 |
75 |
Tetraethylammonium hydroxide, in the form of an aqueous solution containing: — 35 % (± 0,5 %) by weight of tetraethylammonium hydroxide, — not more than 1 000 mg/kg of chloride, — not more than 2 mg/kg of iron and — not more than 10 mg/kg of potassium |
0 % |
31.12.2015 |
|
ex292390 00 |
80 |
Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride, (CAS RN 7398-69-8) |
0 % |
31.12.2018 |
|
ex292419 00 |
10 |
2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9) |
0 % |
31.12.2018 |
|
ex292419 00 |
30 |
Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0) |
0 % |
31.12.2018 |
|
ex292419 00 |
40 |
N-(1,1-Dimethyl-3-oxobutyl)acrylamide (CAS RN 2873-97-4) |
0 % |
31.12.2018 |
|
ex292419 00 |
50 |
Acrylamide (CAS RN 79-06-1) |
0 % |
31.12.2018 |
|
ex292419 00 |
60 |
N,N-Dimethylacrylamide (CAS RN 2680-03-7) |
0 % |
31.12.2016 |
|
ex292419 00 |
70 |
Methylcarbamate (CAS RN 598-55-0) |
0 % |
31.12.2018 |
|
ex292419 00 |
80 |
Tetrabutylurea (CAS RN 4559-86-8) |
0 % |
31.12.2017 |
|
ex292421 00 |
10 |
4,4′-Dihydroxy-7,7′-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts |
0 % |
31.12.2018 |
|
ex292421 00 |
20 |
(3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9) |
0 % |
31.12.2018 |
|
ex292429 98 |
10 |
Alachlor (ISO), (CAS RN 15972-60-8) |
0 % |
31.12.2018 |
|
ex292429 98 |
12 |
4-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2) |
0 % |
31.12.2018 |
|
ex292429 98 |
15 |
Acetochlor (ISO), (CAS RN 34256-82-1) |
0 % |
31.12.2018 |
|
ex292429 98 |
20 |
2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide, (CAS RN 86763-47-5) |
0 % |
31.12.2014 |
|
ex292429 98 |
27 |
2-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9) |
0 % |
31.12.2016 |
|
ex292429 98 |
37 |
Beflubutamid (ISO) (CAS RN 113614-08-7) |
0 % |
31.12.2018 |
|
ex292429 98 |
40 |
N,N′-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5) |
0 % |
31.12.2015 |
|
ex292429 98 |
43 |
N,N'-(3,3'-Dimethylbiphenyl-4,4'-ylene)di(acetoacetamide) (CAS RN 91-96-3) |
0 % |
31.12.2018 |
|
ex292429 98 |
45 |
Propoxur (ISO) (CAS RN 114-26-1) |
0 % |
31.12.2015 |
|
ex292429 98 |
50 |
N,N′-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 42487-09-2) |
0 % |
31.12.2015 |
|
ex292429 98 |
51 |
Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS RN 59673-82-4) |
0 % |
31.12.2017 |
|
ex292429 98 |
53 |
4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8) |
0 % |
31.12.2017 |
|
ex292429 98 |
55 |
N,N′-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 24304-50-5) |
0 % |
31.12.2015 |
|
ex292429 98 |
60 |
N,N′-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 41131-65-1) |
0 % |
31.12.2015 |
|
ex292429 98 |
63 |
N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0) |
0 % |
31.12.2016 |
|
ex292429 98 |
65 |
2-(4-Hydroxyphenyl)acetamide (CAS RN 17194-82-0) |
0 % |
31.12.2018 |
|
ex292429 98 |
75 |
3-Amino-p-anisanilide (CAS RN 120-35-4) |
0 % |
31.12.2018 |
|
ex292429 98 |
80 |
5′-Chloro-3-hydroxy-2′,4′-dimethoxy-2-naphthanilide (CAS RN 92-72-8) |
0 % |
31.12.2018 |
|
ex292429 98 |
85 |
p-Aminobenzamide (CAS RN 2835-68-9) |
0 % |
31.12.2018 |
|
ex292429 98 |
86 |
Anthranilamide of a purity by weight of 99,5 % or more (CAS RN 88-68-6) |
0 % |
31.12.2017 |
|
ex292429 98 |
87 |
Paracetamol (INN) (CAS RN 103-90-2) |
0 % |
31.12.2018 |
|
ex292429 98 |
88 |
5′-Chloro-3-hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-63-7) |
0 % |
31.12.2018 |
|
ex292429 98 |
89 |
Flutolanil (ISO) (CAS RN 66332-96-5) |
0 % |
31.12.2018 |
|
ex292429 98 |
91 |
3-Hydroxy-2′-methoxy-2-naphthanilide (CAS RN 135-62-6) |
0 % |
31.12.2018 |
|
ex292429 98 |
92 |
3-Hydroxy-2-naphthanilide (CAS RN 92-77-3) |
0 % |
31.12.2014 |
|
ex292429 98 |
93 |
3-Hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-61-5) |
0 % |
31.12.2018 |
|
ex292429 98 |
94 |
2′-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0) |
0 % |
31.12.2018 |
|
ex292429 98 |
97 |
1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3) |
0 % |
31.12.2018 |
|
ex292511 00 |
20 |
Saccharin and its sodium salt |
0 % |
31.12.2018 |
|
ex292519 95 |
10 |
N-Phenylmaleimide (CAS RN 941-69-5) |
0 % |
31.12.2018 |
|
ex292519 95 |
20 |
4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9) |
0 % |
31.12.2017 |
|
ex292519 95 |
30 |
N,N′-(m-Phenylene)dimaleimide (CAS RN 3006-93-7) |
0 % |
31.12.2017 |
|
ex292529 00 |
10 |
Dicyclohexylcarbodiimide (CAS RN 538-75-0) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex292529 00 |
20 |
N-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8) |
0 % |
31.12.2018 |
|
ex292690 95 |
13 |
alpha-Bromo-o-toluonitrile (CAS RN 22115-41-9) |
0 % |
31.12.2018 |
|
ex292690 95 |
20 |
2-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0) |
0 % |
31.12.2014 |
|
ex292690 95 |
23 |
Acrinathrin (ISO) (CAS RN 101007-06-1) |
0 % |
31.12.2018 |
|
ex292690 95 |
25 |
2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2) |
0 % |
31.12.2016 |
|
ex292690 95 |
27 |
Cyhalofop-butyl (ISO) (CAS RN 122008-85-9) |
0 % |
31.12.2018 |
|
ex292690 95 |
30 |
2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanenitrile hydrochloride, (CAS RN 2544-13-0) |
0 % |
31.12.2015 |
|
ex292690 95 |
50 |
Alkyl or alkoxyalkyl esters of cyanoacetic acid |
0 % |
31.12.2018 |
|
ex292690 95 |
55 |
Methyl-2-cyano-2-phenylbutyrate (CAS RN 24131-07-5) |
0 % |
31.12.2016 |
|
ex292690 95 |
60 |
Cyanoacetic acid in crystalline form (CAS RN 372-09-8) |
0 % |
31.12.2014 |
|
ex292690 95 |
61 |
m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3) |
0 % |
31.12.2016 |
|
ex292690 95 |
63 |
1-(Cyanoacetyl)-3-ethylurea (CAS RN 41078-06-2) |
0 % |
31.12.2014 |
|
ex292690 95 |
64 |
Esfenvalerate of a purity by weight of 83 % or more in a mixture of its own isomers (CAS RN 66230-04-4) |
0 % |
31.12.2014 |
|
ex292690 95 |
65 |
Malononitrile (CAS RN 109-77-3) |
0 % |
31.12.2018 |
|
ex292690 95 |
70 |
Methacrylonitrile (CAS RN 126-98-7) |
0 % |
31.12.2014 |
|
ex292690 95 |
74 |
Chlorothalonil (ISO) (CAS RN 1897-45-6) |
0 % |
31.12.2014 |
|
ex292690 95 |
75 |
Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0) |
0 % |
31.12.2014 |
|
ex292690 95 |
80 |
Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8) |
0 % |
31.12.2018 |
|
ex292690 95 |
86 |
Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6) |
0 % |
31.12.2018 |
|
ex292690 95 |
89 |
Butyronitrile (CAS RN 109-74-0) |
0 % |
31.12.2018 |
|
ex292700 00 |
10 |
2,2′-Dimethyl-2,2′-azodipropionamidine dihydrochloride |
0 % |
31.12.2018 |
|
ex292700 00 |
20 |
4-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2) |
0 % |
31.12.2018 |
|
ex292700 00 |
30 |
4′-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4) |
0 % |
31.12.2018 |
|
ex292700 00 |
60 |
4,4'-Dicyano-4,4'-azodivaleric acid (CAS RN 2638-94-0) |
0 % |
31.12.2018 |
|
ex292700 00 |
70 |
Tetrasodium 3,3′-[azoxybis[(2-methoxy-4,1-phenylene)azo]]bis[4,5-dihydroxynaphthalene-2,7-disulphonate], (CAS RN 83968-64-3) |
0 % |
31.12.2014 |
|
ex292700 00 |
80 |
4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7) |
0 % |
31.12.2017 |
|
ex292800 90 |
10 |
3,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide (CAS RN 32687-78-8) |
0 % |
31.12.2018 |
|
ex292800 90 |
25 |
Acetaldehyde oxime in an aqueous solution (CAS RN 107-29-9) |
0 % |
31.12.2015 |
|
ex292800 90 |
30 |
N-Isopropylhydroxylamine (CAS RN 5080-22-8) |
0 % |
31.12.2016 |
|
ex292800 90 |
35 |
2-Chloro-N-methoxy-N-methylacetamide (CAS RN 67442-07-3) |
0 % |
31.12.2018 |
|
ex292800 90 |
40 |
O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2) |
0 % |
31.12.2018 |
|
ex292800 90 |
45 |
Tebufenozide (ISO) (CAS RN 112410-23-8) |
0 % |
31.12.2018 |
|
ex292800 90 |
55 |
Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1) |
0 % |
31.12.2018 |
|
ex292800 90 |
60 |
Adipohydrazide (CAS RN 1071-93-8) |
0 % |
31.12.2018 |
|
ex292800 90 |
70 |
Butanone oxime (CAS RN 96-29-7) |
0 % |
31.12.2018 |
|
ex292800 90 |
75 |
Metaflumizone (ISO) (CAS RN 139968-49-3) |
0 % |
31.12.2016 |
|
ex292800 90 |
80 |
Cyflufenamid (ISO) (CAS RN 180409-60-3) |
0 % |
31.12.2018 |
|
ex292800 90 |
85 |
Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5) |
0 % |
31.12.2016 |
|
ex292910 00 |
10 |
Methylenedicyclohexyl diisocyanates (CAS RN 28605-81-4) |
0 % |
31.12.2018 |
|
ex292910 00 |
15 |
3,3′-Dimethylbiphenyl-4,4′-diyl diisocyanate (CAS RN 91-97-4) |
0 % |
31.12.2014 |
|
ex292910 00 |
20 |
Butyl isocyanate (CAS RN 111-36-4) |
0 % |
31.12.2017 |
|
ex292910 00 |
40 |
m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7) |
0 % |
31.12.2018 |
|
ex292910 00 |
50 |
m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9) |
0 % |
31.12.2018 |
|
ex292910 00 |
55 |
2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8) |
0 % |
31.12.2015 |
|
ex292910 00 |
60 |
Trimethylhexamethylene diisocyanate, mixed isomers |
0 % |
31.12.2018 |
|
ex292910 00 |
80 |
1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1) |
0 % |
31.12.2016 |
|
ex293020 00 |
10 |
Prosulfocarb (ISO) (CAS RN 52888-80-9) |
0 % |
31.12.2017 |
|
ex293020 00 |
20 |
2-Isopropylethylthiocarbamate (CAS RN 141-98-0) |
0 % |
31.12.2016 |
|
ex293090 99 |
10 |
2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6) |
0 % |
31.12.2015 |
|
ex293090 99 |
13 |
Mercaptamine hydrochloride (CAS RN 156-57-0) |
0 % |
31.12.2016 |
|
ex293090 99 |
14 |
4-(Methylthio)benzaldehyde (CAS RN 3446-89-7) |
0 % |
31.12.2018 |
|
ex293090 99 |
15 |
Ethoprophos (ISO) (CAS RN 13194-48-4) |
0 % |
31.12.2018 |
|
ex293090 99 |
17 |
2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4) |
0 % |
31.12.2018 |
|
ex293090 99 |
18 |
1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret (CAS RN 106310-17-2) |
0 % |
31.12.2016 |
|
ex293090 99 |
20 |
2-Methoxy-N-[2-nitro-5-(phenylthio)phenyl]acetamide (CAS RN 63470-85-9) |
0 % |
31.12.2015 |
|
ex293090 99 |
23 |
Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8) |
0 % |
31.12.2018 |
|
ex293090 99 |
25 |
Thiophanate-methyl (ISO), (CAS RN 23564-05-8) |
0 % |
31.12.2018 |
|
ex293090 99 |
30 |
4-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6) |
0 % |
31.12.2018 |
|
ex293090 99 |
35 |
Glutathione (CAS RN 70-18-8) |
0 % |
31.12.2016 |
|
ex293090 99 |
37 |
Ethanethioamide (CAS RN 62-55-5) |
0 % |
31.12.2018 |
|
ex293090 99 |
40 |
3,3′-Thiodi(propionic acid) (CAS RN 111-17-1) |
0 % |
31.12.2018 |
|
ex293090 99 |
43 |
Trimethylsulfoxonium iodide (CAS RN 1774-47-6) |
0 % |
31.12.2018 |
|
ex293090 99 |
45 |
2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5) |
0 % |
31.12.2018 |
|
ex293090 99 |
50 |
[S-(R*,R*)]-2-Amino-1-[4-(methylthio)-phenyl]-1,3-propanediol, (CAS RN 23150-35-8) |
0 % |
31.12.2015 |
|
ex293090 99 |
55 |
Thiourea (CAS RN 62-56-6) |
0 % |
31.12.2015 |
|
ex293090 99 |
60 |
Methyl phenyl sulphide (CAS RN 100-68-5) |
0 % |
31.12.2018 |
|
ex293090 99 |
62 |
Zinc bis(benzenesulfinate) (CAS RN 24308-84-7) |
0 % |
31.12.2014 |
|
ex293090 99 |
64 |
3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2) |
0 % |
31.12.2014 |
|
ex293090 99 |
65 |
Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7) |
0 % |
31.12.2015 |
|
ex293090 99 |
66 |
Diphenyl sulphide (CAS RN 139-66-2) |
0 % |
31.12.2017 |
|
ex293090 99 |
67 |
3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2) |
0 % |
31.12.2018 |
|
ex293090 99 |
68 |
Clethodim (ISO) (CAS RN 99129-21-2) |
0 % |
31.12.2017 |
|
ex293090 99 |
77 |
4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7) |
0 % |
31.12.2018 |
|
ex293090 99 |
78 |
4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6) |
0 % |
31.12.2016 |
|
ex293090 99 |
80 |
Captan (ISO) (CAS RN 133-06-2) |
0 % |
31.12.2018 |
|
ex293090 99 |
81 |
Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3) |
3 % |
31.12.2014 |
|
ex293090 99 |
83 |
Methyl-p-tolyl sulphone (CAS RN 3185-99-7) |
0 % |
31.12.2017 |
|
ex293090 99 |
84 |
2-Chloro-4-(methylsulphonyl)benzoic acid (CAS RN 53250-83-2) |
0 % |
31.12.2014 |
|
ex293090 99 |
87 |
3-Sulphinobenzoic acid (CAS RN 15451-00-0) |
0 % |
31.12.2018 |
|
ex293090 99 |
89 |
Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates |
0 % |
31.12.2016 |
|
ex293190 90 |
05 |
Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane |
0 % |
31.12.2018 |
|
ex293190 90 |
10 |
Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN |
0 % |
31.12.2015 |
|
ex293190 90 |
14 |
Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution |
0 % |
31.12.2017 |
|
ex293190 90 |
15 |
Triethylborane (CAS RN 97-94-9) |
0 % |
31.12.2015 |
|
ex293190 90 |
18 |
Trioctylphosphine oxide (CAS RN 78-50-2) |
0 % |
31.12.2016 |
|
ex293190 90 |
20 |
Methylcyclopentadienyl manganese tricarbonyl containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl, (CAS RN 12108-13-3) |
0 % |
31.12.2014 |
|
ex293190 90 |
24 |
Methyl tris (2-pentanoneoxime) silane (CAS RN 37859-55-5) |
0 % |
31.12.2014 |
|
ex293190 90 |
30 |
Diethylborane isopropoxide (CAS RN 74953-03-0) |
0 % |
31.12.2015 |
|
ex293190 90 |
33 |
Di-tert-butylphosphane (CAS RN 819-19-2) |
0 % |
31.12.2018 |
|
ex293190 90 |
35 |
(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6) |
0 % |
31.12.2017 |
|
ex293190 90 |
40 |
N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) |
0 % |
31.12.2014 |
|
ex293190 90 |
50 |
Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6) |
0 % |
31.12.2018 |
|
ex293190 90 |
55 |
Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7) |
0 % |
31.12.2014 |
|
ex293190 90 |
70 |
N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3) |
0 % |
31.12.2014 |
|
ex293190 90 |
72 |
Phenylphosphonic dichloride (CAS RN 824-72-6) |
0 % |
31.12.2016 |
|
ex293190 90 |
75 |
Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1) |
0 % |
31.12.2016 |
|
ex293190 90 |
86 |
Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane |
0 % |
31.12.2018 |
|
ex293190 90 |
87 |
Tris(4-methylpentan-2-oximino)methylsilane (CAS RN 37859-57-7) |
0 % |
31.12.2018 |
|
ex293190 90 |
89 |
Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4) |
0 % |
31.12.2014 |
|
ex293190 90 |
91 |
Trimethylsilane (CAS RN 993-07-7) |
0 % |
31.12.2016 |
|
ex293190 90 |
92 |
Trimethylborane (CAS RN 593-90-8) |
0 % |
31.12.2014 |
|
ex293190 90 |
96 |
3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8) |
0 % |
31.12.2018 |
|
ex293213 00 |
10 |
Tetrahydrofurfuryl alcohol (CAS RN 97-99-4) |
0 % |
31.12.2018 |
|
ex293219 00 |
40 |
Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more |
0 % |
31.12.2014 |
|
ex293219 00 |
41 |
2,2 di(tetrahydrofuryl)propane (CAS RN 89686-69-1) |
0 % |
31.12.2014 |
|
ex293219 00 |
45 |
1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside, (CAS RN 56038-13-2) |
0 % |
31.12.2014 |
|
ex293219 00 |
50 |
2-Methylfuran (CAS RN 534-22-5) |
0 % |
31.12.2015 |
|
ex293219 00 |
70 |
Furfurylamine (CAS RN 617-89-0) |
0 % |
31.12.2014 |
|
ex293219 00 |
75 |
Tetrahydro-2-methylfuran (CAS RN 96-47-9) |
0 % |
31.12.2018 |
|
ex293219 00 |
80 |
5-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7) |
0 % |
31.12.2016 |
|
ex293220 90 |
10 |
2′-Anilino-6′-[ethyl(isopentyl)amino]-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one (CAS RN 70516-41-5) |
0 % |
31.12.2018 |
|
ex293220 90 |
15 |
Coumarin (CAS RN 91-64-5) |
0 % |
31.12.2016 |
|
ex293220 90 |
20 |
Ethyl 6′-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9′-xanthene]-2′-carboxylate (CAS RN 154306-60-2) |
0 % |
31.12.2017 |
|
ex293220 90 |
35 |
6′-Diethylamino-3′-methyl-2′-(2,4-xylidino)spiro[isobenzofuran-1(3H),9′-xanthen]-3-one (CAS RN 36431-22-8) |
0 % |
31.12.2018 |
|
ex293220 90 |
40 |
(S)-(-)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9) |
0 % |
31.12.2017 |
|
ex293220 90 |
45 |
2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1) |
0 % |
31.12.2018 |
|
ex293220 90 |
55 |
6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7) |
0 % |
31.12.2018 |
|
ex293220 90 |
60 |
6′-(Diethylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 29512-49-0) |
0 % |
31.12.2016 |
|
ex293220 90 |
70 |
3′,6′-Bis(ethylamino)-2′,7′-dimethylspiro[isobenzofuran-1(3H),9′-[9H]-xanthen]-3-one, (CAS RN 41382-37-0) |
0 % |
31.12.2018 |
|
ex293220 90 |
71 |
6′-(Dibutylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 89331-94-2) |
0 % |
31.12.2016 |
|
ex293220 90 |
72 |
2′-[Bis(phenylmethyl)amino]-6′-(diethylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 34372-72-0) |
0 % |
31.12.2016 |
|
ex293220 90 |
80 |
Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5) |
0 % |
31.12.2018 |
|
ex293220 90 |
84 |
Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5) |
0 % |
31.12.2018 |
|
ex293299 00 |
10 |
Bendiocarb (ISO) (CAS RN 22781-23-3) |
0 % |
31.12.2018 |
|
ex293299 00 |
15 |
1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5) |
0 % |
31.12.2016 |
|
ex293299 00 |
20 |
Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1) |
0 % |
31.12.2016 |
|
ex293299 00 |
25 |
1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7) |
0 % |
31.12.2017 |
|
ex293299 00 |
35 |
1,2,3-Trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol, (CAS RN 882073-43-0) |
0 % |
31.12.2018 |
|
ex293299 00 |
40 |
1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2) |
0 % |
31.12.2018 |
|
ex293299 00 |
45 |
2-Butylbenzofuran (CAS RN 4265-27-4) |
0 % |
31.12.2018 |
|
ex293299 00 |
50 |
7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6) |
0 % |
31.12.2015 |
|
ex293299 00 |
53 |
1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3) |
0 % |
31.12.2018 |
|
ex293299 00 |
55 |
6-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic acid (CAS RN 99199-60-7) |
0 % |
31.12.2018 |
|
ex293299 00 |
70 |
1,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9) |
0 % |
31.12.2016 |
|
ex293299 00 |
75 |
3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0) |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex293299 00 |
80 |
1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0) |
0 % |
31.12.2016 |
|
ex293319 90 |
30 |
3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0) |
0 % |
31.12.2018 |
|
ex293319 90 |
40 |
Edaravone (INN) (CAS RN 89-25-8) |
0 % |
31.12.2018 |
|
ex293319 90 |
50 |
Fenpyroximate (ISO) (CAS RN 134098-61-6) |
0 % |
31.12.2014 |
|
ex293319 90 |
60 |
Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9) |
0 % |
31.12.2014 |
|
ex293319 90 |
70 |
4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2) |
0 % |
31.12.2018 |
|
ex293319 90 |
80 |
3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5) |
0 % |
31.12.2017 |
|
ex293319 90 |
85 |
Allyl 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioate (CAS RN 473799-16-5) |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex293321 00 |
50 |
1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2)/(CAS RN 32718-18-6) |
0 % |
31.12.2016 |
|
ex293321 00 |
60 |
DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9) |
0 % |
31.12.2016 |
|
ex293321 00 |
70 |
α-(4-Methoxybenzoyl)-α-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5-dodecyloxycarbonylacetanilide, (CAS RN 70950-45-7) |
0 % |
31.12.2016 |
|
ex293321 00 |
80 |
5,5-Dimethylhydantoin (CAS RN 77-71-4) |
0 % |
31.12.2015 |
|
ex293329 90 |
15 |
Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0) |
0 % |
31.12.2018 |
|
ex293329 90 |
25 |
Prochloraz (ISO) (CAS RN 67747-09-5) |
0 % |
31.12.2018 |
|
ex293329 90 |
35 |
1-Trityl-4-formylimidazole (CAS RN 33016-47-6) |
0 % |
31.12.2018 |
|
ex293329 90 |
40 |
Triflumizole (ISO) (CAS RN 68694-11-1) |
0 % |
31.12.2014 |
|
ex293329 90 |
45 |
Prochloraz copper chloride (ISO) (CAS RN 156065-03-1) |
0 % |
31.12.2018 |
|
ex293329 90 |
50 |
1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9) |
0 % |
31.12.2018 |
|
ex293329 90 |
60 |
1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2) |
0 % |
31.12.2016 |
|
ex293329 90 |
70 |
Cyazofamid (ISO) (CAS RN 120116-88-3) |
0 % |
31.12.2016 |
|
ex293329 90 |
80 |
Imazalil (ISO) (CAS RN 35554-44-0) |
0 % |
31.12.2017 |
|
ex293339 99 |
12 |
2,3-Dichloropyridine (CAS RN 2402-77-9) |
0 % |
31.12.2017 |
|
ex293339 99 |
15 |
Pyridine-2,3-dicarboxylic acid (CAS RN 89-00-9) |
0 % |
31.12.2018 |
|
ex293339 99 |
18 |
6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0) |
0 % |
31.12.2017 |
|
ex293339 99 |
20 |
Copper pyrithione powder (CAS RN 14915-37-8) |
0 % |
31.12.2014 |
|
ex293339 99 |
24 |
2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3) |
0 % |
31.12.2014 |
|
ex293339 99 |
25 |
Imazethapyr (ISO) (CAS RN 81335-77-5) |
0 % |
31.12.2018 |
|
ex293339 99 |
30 |
Fluazinam (ISO) (CAS RN 79622-59-6) |
0 % |
31.12.2014 |
|
ex293339 99 |
32 |
2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2) |
0 % |
31.12.2016 |
|
ex293339 99 |
35 |
Aminopyralid (ISO) (CAS RN 150114-71-9) |
0 % |
31.12.2018 |
|
ex293339 99 |
37 |
Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2) |
0 % |
31.12.2016 |
|
ex293339 99 |
40 |
2-Chloropyridine (CAS RN 109-09-1) |
0 % |
31.12.2018 |
|
ex293339 99 |
42 |
2,2,6,6-Tetramethylpiperidine (CAS RN 768-66-1) |
0 % |
31.12.2016 |
|
ex293339 99 |
45 |
5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole, (CAS RN 102625-64-9) |
0 % |
31.12.2014 |
|
ex293339 99 |
47 |
(-)-trans-4-(4′-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5) |
0 % |
31.12.2014 |
|
ex293339 99 |
48 |
Flonicamid (ISO) (CAS RN 158062-67-0) |
0 % |
31.12.2014 |
|
ex293339 99 |
49 |
2-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]thio]-1H-benzimidazole, (CAS RN 103577-40-8) |
0 % |
31.12.2015 |
|
ex293339 99 |
50 |
N-Fluoro-2,6-dichloropyridinium tetrafluoroborate (CAS RN 140623-89-8) |
0 % |
31.12.2016 |
|
ex293339 99 |
53 |
3-Bromopyridine (CAS RN 626-55-1) |
0 % |
31.12.2018 |
|
ex293339 99 |
55 |
Pyriproxyfen (ISO) of a purity by weight of 97 % or more (CAS RN 95737-68-1) |
0 % |
31.12.2014 |
|
ex293339 99 |
57 |
Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0) |
0 % |
31.12.2017 |
|
ex293339 99 |
58 |
4-Chloro-1-methylpiperidine (CAS RN 5570-77-4) |
0 % |
31.12.2018 |
|
ex293339 99 |
60 |
2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0) |
0 % |
31.12.2018 |
|
ex293339 99 |
63 |
2-Aminomethyl-3-chloro-5-trifluoromethylpyridine hydrochloride (CAS RN 326476-49-7) |
0 % |
31.12.2018 |
|
ex293339 99 |
65 |
Acetamiprid (ISO) (CAS RN 135410-20-7) |
0 % |
31.12.2018 |
|
ex293339 99 |
67 |
(1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2) |
0 % |
31.12.2018 |
|
ex293339 99 |
70 |
2,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7) |
0 % |
31.12.2016 |
|
ex293339 99 |
72 |
5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS RN 120014-30-4) |
0 % |
31.12.2016 |
|
ex293339 99 |
77 |
Imazamox (ISO) (CAS RN 114311-32-9) |
0 % |
31.12.2018 |
|
ex293339 99 |
85 |
2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3) |
0 % |
31.12.2015 |
|
ex293349 10 |
10 |
Quinmerac (ISO) (CAS RN 90717-03-6) |
0 % |
31.12.2018 |
|
ex293349 10 |
20 |
3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7) |
0 % |
31.12.2018 |
|
ex293349 10 |
30 |
Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6) |
0 % |
31.12.2017 |
|
ex293349 90 |
30 |
Quinoline (CAS RN 91-22-5) |
0 % |
31.12.2015 |
|
ex293349 90 |
40 |
Isoquinoline (CAS RN 119-65-3) |
0 % |
31.12.2015 |
|
ex293349 90 |
60 |
5,6,7,8-Tetrahydroquinoline (CAS RN 10500-57-9) |
0 % |
31.12.2014 |
|
ex293349 90 |
70 |
Quinolin-8-ol (CAS RN 148-24-3) |
0 % |
31.12.2018 |
|
ex293349 90 |
80 |
Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1) |
0 % |
31.12.2018 |
|
ex293352 00 |
10 |
Malonylurea (barbituric acid) (CAS RN 67-52-7) |
0 % |
31.12.2016 |
|
ex293359 95 |
13 |
2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex293359 95 |
15 |
Sitagliptin phosphate monohydrate (CAS RN 654671-77-9) |
0 % |
31.12.2018 |
|
ex293359 95 |
17 |
N,N′-(4,6-Dichloropyrimidine-2,5-diyl)diformamide (CAS RN 116477-30-6) |
0 % |
31.12.2018 |
|
ex293359 95 |
20 |
2,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2) |
0 % |
31.12.2018 |
|
ex293359 95 |
23 |
6-Chloro-3-methyluracil (CAS RN 4318-56-3) |
0 % |
31.12.2018 |
|
ex293359 95 |
27 |
2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8) |
0 % |
31.12.2018 |
|
ex293359 95 |
30 |
Mepanipyrim (ISO) (CAS RN 110235-47-7) |
0 % |
31.12.2018 |
|
ex293359 95 |
45 |
1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1) |
0 % |
31.12.2014 |
|
ex293359 95 |
50 |
2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1) |
0 % |
31.12.2014 |
|
ex293359 95 |
55 |
Thiopental (INNM) (CAS RN 76-75-5) |
0 % |
31.12.2014 |
|
ex293359 95 |
60 |
2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8) |
0 % |
31.12.2018 |
|
ex293359 95 |
65 |
1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate), (CAS RN 140681-55-6) |
0 % |
31.12.2014 |
|
ex293359 95 |
70 |
N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9) |
0 % |
31.12.2018 |
|
ex293359 95 |
72 |
Triacetylganciclovir (CAS RN 86357-14-4) |
0 % |
31.12.2016 |
|
ex293359 95 |
75 |
(2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8) |
0 % |
31.12.2014 |
|
ex293359 95 |
77 |
3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6) |
0 % |
31.12.2017 |
|
ex293369 80 |
25 |
1,3,5-Triazine-2,4,6-triamine monophosphate (CAS RN 20208-95-1) |
0 % |
31.12.2016 |
|
ex293369 80 |
40 |
Troclosene sodium (INNM) (CAS RN 2893-78-9) |
0 % |
31.12.2016 |
|
ex293369 80 |
50 |
1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9) |
0 % |
31.12.2018 |
|
ex293369 80 |
55 |
Terbutryn (ISO) (CAS RN 886-50-0) |
0 % |
31.12.2015 |
|
ex293369 80 |
60 |
Cyanuric acid (CAS RN 108-80-5) |
0 % |
31.12.2015 |
|
ex293369 80 |
65 |
1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6) |
0 % |
31.12.2018 |
|
ex293369 80 |
80 |
Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7) |
0 % |
31.12.2018 |
|
ex293379 00 |
30 |
5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0) |
0 % |
31.12.2017 |
|
ex293379 00 |
50 |
6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6) |
0 % |
31.12.2018 |
|
ex293379 00 |
60 |
3,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9) |
0 % |
31.12.2014 |
|
ex293379 00 |
70 |
(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2) |
0 % |
31.12.2015 |
|
ex293399 80 |
10 |
2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol (CAS RN 3846-71-7) |
0 % |
31.12.2018 |
|
ex293399 80 |
13 |
5-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7) |
0 % |
31.12.2016 |
|
ex293399 80 |
14 |
2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6) |
0 % |
31.12.2018 |
|
ex293399 80 |
15 |
2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1) |
0 % |
31.12.2018 |
|
ex293399 80 |
18 |
4,4′-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4) |
0 % |
31.12.2017 |
|
ex293399 80 |
20 |
2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7) |
0 % |
31.12.2018 |
|
ex293399 80 |
22 |
(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4) |
0 % |
31.12.2017 |
|
ex293399 80 |
24 |
1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3) |
0 % |
31.12.2017 |
|
ex293399 80 |
28 |
N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8) |
0 % |
31.12.2017 |
|
ex293399 80 |
30 |
Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3) |
0 % |
31.12.2018 |
|
ex293399 80 |
32 |
5-[4′-(Bromomethyl)biphenyl-2-yl]-2-trityl-2H-tetrazole (CAS RN 133051-88-4) |
0 % |
31.12.2014 |
|
ex293399 80 |
35 |
1,3,3-Trimethyl-2-methyleneindoline (CAS RN 118-12-7) |
0 % |
31.12.2014 |
|
ex293399 80 |
37 |
8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1) |
0 % |
31.12.2014 |
|
ex293399 80 |
40 |
trans-4-Hydroxy-L-proline (CAS RN 51-35-4) |
0 % |
31.12.2018 |
|
ex293399 80 |
43 |
2,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline (CAS RN 5840-01-7) |
0 % |
31.12.2017 |
|
ex293399 80 |
45 |
Maleic hydrazide (ISO) (CAS RN 123-33-1) |
0 % |
31.12.2018 |
|
ex293399 80 |
47 |
Paclobutrazol (ISO) (CAS RN 76738-62-0) |
0 % |
31.12.2017 |
|
ex293399 80 |
50 |
Metconazole (ISO) (CAS RN 125116-23-6) |
3,2 % |
31.12.2018 |
|
ex293399 80 |
53 |
Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (5) |
0 % |
31.12.2018 |
|
ex293399 80 |
55 |
Pyridaben (ISO) (CAS RN 96489-71-3) |
0 % |
31.12.2014 |
|
ex293399 80 |
57 |
2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1) |
0 % |
31.12.2018 |
|
ex293399 80 |
62 |
1H-Indole-6-carboxylic acid (CAS RN 1670-82-2) |
0 % |
31.12.2018 |
|
ex293399 80 |
64 |
((3R)-1-{(1R,2R)-2-[2-(3,4-Dimethoxyphenyl) ethoxy]cyclohexyl}pyrrolidin-3-ol.hydrochloride, (CAS RN 748810-28-8) |
0 % |
31.12.2015 |
|
ex293399 80 |
67 |
Candesartan ethyl ester (INNM) (CAS RN 139481-58-6) |
0 % |
31.12.2016 |
|
ex293399 80 |
71 |
10-Methoxyiminostilbene (CAS RN 4698-11-7) |
0 % |
31.12.2018 |
|
ex293399 80 |
72 |
1,4,7-Trimethyl-1,4,7-Triazacyclononane |
0 % |
31.12.2018 |
|
ex293399 80 |
74 |
Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2) |
0 % |
31.12.2018 |
|
ex293399 80 |
76 |
Manganese(2+), bis(octahydro-1,4,7-trimethyl-1H-1,4,7-triazonine-N1,N4,N7)tri-μ-oxodi-, acetate (1:2) (CAS RN 916075-10-0) |
0 % |
31.12.2014 |
|
ex293399 80 |
78 |
3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7) |
0 % |
31.12.2018 |
|
ex293399 80 |
81 |
1,2,3-Benzotriazole (CAS RN 95-14-7) |
0 % |
31.12.2016 |
|
ex293399 80 |
82 |
Tolytriazole (CAS RN 29385-43-1) |
0 % |
31.12.2018 |
|
ex293399 80 |
88 |
2,6-Dichloroquinoxaline (CAS RN 18671-97-1) |
0 % |
31.12.2014 |
|
ex293399 80 |
89 |
Carbendazim (ISO) (CAS RN 10605-21-7) |
0 % |
31.12.2018 |
|
ex293410 00 |
10 |
Hexythiazox (ISO) (CAS RN 78587-05-0) |
0 % |
31.12.2018 |
|
ex293410 00 |
15 |
4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3) |
0 % |
31.12.2017 |
|
ex293410 00 |
20 |
2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8) |
0 % |
31.12.2018 |
|
ex293410 00 |
25 |
(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3) |
0 % |
31.12.2017 |
|
ex293410 00 |
35 |
(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8) |
0 % |
31.12.2017 |
|
ex293410 00 |
40 |
(Z)-2-(2-tert-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978-24-7) |
0 % |
31.12.2018 |
|
ex293410 00 |
60 |
Fosthiazate (ISO) (CAS RN 98886-44-3) |
0 % |
31.12.2014 |
|
ex293410 00 |
70 |
2-(Formylamino)-4-thiazoleacetyl chloride, hydrochloride (CAS RN 372092-18-7) |
0 % |
31.12.2016 |
|
ex293410 00 |
80 |
3,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0) |
0 % |
31.12.2016 |
|
ex293420 80 |
20 |
S-1,3-Benzothiazol-2-yl (2Z)-(5-amino-1,2,4-thiadiazol-3-yl)(methoxyimino)ethanethioate (CAS RN 89604-91-1) |
0 % |
31.12.2016 |
|
ex293420 80 |
30 |
2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1) |
0 % |
31.12.2016 |
|
ex293420 80 |
40 |
1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5) |
0 % |
31.12.2017 |
|
ex293420 80 |
50 |
S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, (CAS RN 104797-47-9) |
0 % |
31.12.2018 |
|
ex293420 80 |
60 |
Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3) |
0 % |
31.12.2015 |
|
ex293420 80 |
70 |
N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8) |
0 % |
31.12.2015 |
|
ex293430 90 |
10 |
2-Methylthiophenothiazine (CAS RN 7643-08-5) |
0 % |
31.12.2017 |
|
ex293499 90 |
11 |
Methyl 3-{1,4-dioxaspiro[4.5]dec-8-yl[(trans-4-methylcyclohexyl)carbonyl]amino}-5-iodothiophene-2-carboxylate (CAS RN 1026785-65-8) |
0 % |
31.12.2018 |
|
ex293499 90 |
12 |
Dimethomorph (ISO) (CAS RN 110488-70-5) |
0 % |
31.12.2018 |
|
ex293499 90 |
13 |
Buprofezin (ISO) of a purity by weight of 98,5 % or more (CAS RN 953030-84-7) |
0 % |
31.12.2018 |
|
ex293499 90 |
14 |
Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2) |
0 % |
31.12.2017 |
|
ex293499 90 |
15 |
Carboxin (ISO) (CAS RN 5234-68-4) |
0 % |
31.12.2018 |
|
ex293499 90 |
17 |
Methyl(1,8-diethyl-1,3,4,9-tetrahydropyrano[3,4-b]indol-1-yl)acetate (CAS RN 122188-02-7) |
0 % |
31.12.2016 |
|
ex293499 90 |
18 |
3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) |
0 % |
31.12.2017 |
|
ex293499 90 |
20 |
Thiophene (CAS RN 110-02-1) |
0 % |
31.12.2014 |
|
ex293499 90 |
22 |
7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1) |
0 % |
31.12.2017 |
|
ex293499 90 |
23 |
Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2) |
0 % |
31.12.2016 |
|
ex293499 90 |
25 |
2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) |
0 % |
31.12.2015 |
|
ex293499 90 |
28 |
11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4) |
0 % |
31.12.2016 |
|
ex293499 90 |
30 |
Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7) |
0 % |
31.12.2014 |
|
ex293499 90 |
33 |
[2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3) |
0 % |
31.12.2016 |
|
ex293499 90 |
35 |
Dimethenamide (ISO) (CAS RN 87674-68-8) |
0 % |
31.12.2018 |
|
ex293499 90 |
37 |
4-Propan-2-ylmorpholine (CAS RN 1004-14-4) |
0 % |
31.12.2017 |
|
ex293499 90 |
40 |
2-Thiophene ethylamine (CAS RN 30433-91-1) |
0 % |
31.12.2015 |
|
ex293499 90 |
43 |
Clopidogrel acid hydrochloride (CAS RN 144750-42-5) |
0 % |
31.12.2016 |
|
ex293499 90 |
45 |
Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione (CAS RN 2451-62-9) |
0 % |
31.12.2018 |
|
ex293499 90 |
48 |
Propan-2-ol – 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9) |
0 % |
31.12.2016 |
|
ex293499 90 |
50 |
10-[1,1′-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate, (CAS RN 591773-92-1) |
0 % |
31.12.2015 |
|
▼M1 ————— |
||||
|
ex293499 90 |
60 |
DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3) |
0 % |
31.12.2018 |
|
ex293499 90 |
66 |
Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0) |
0 % |
31.12.2018 |
|
ex293499 90 |
72 |
1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione (CAS RN 1672-88-4) |
0 % |
31.12.2018 |
|
ex293499 90 |
74 |
2-Isopropylthioxanthone (CAS RN 5495-84-1) |
0 % |
31.12.2017 |
|
ex293499 90 |
75 |
(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1) |
0 % |
31.12.2016 |
|
ex293499 90 ex320420 00 |
76 10 |
2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5) |
0 % |
31.12.2016 |
|
ex293499 90 |
77 |
Potassium 5-methyl-1,3,4-oxadiazole-2-carboxylate (CAS RN 888504-28-7) |
0 % |
31.12.2016 |
|
ex293499 90 |
79 |
Thiophen-2-ethanol (CAS RN 5402-55-1) |
0 % |
31.12.2018 |
|
ex293499 90 |
83 |
Flumioxazin (ISO) of a purity by weight of 96 % or more (CAS RN 103361-09-7) |
0 % |
31.12.2014 |
|
ex293499 90 |
84 |
Etoxazole (ISO) of a purity by weight of 94,8 % or more (CAS RN 153233-91-1) |
0 % |
31.12.2014 |
|
ex293499 90 |
85 |
N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride (CAS RN 126586-91-2) |
0 % |
31.12.2015 |
|
ex293499 90 |
86 |
Dithianon (ISO) (CAS RN 3347-22-6) |
0 % |
31.12.2015 |
|
ex293499 90 |
87 |
2,2′-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4) |
0 % |
31.12.2015 |
|
ex293500 90 |
15 |
Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex293500 90 |
17 |
6-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS RN 120279-88-1) |
0 % |
31.12.2018 |
|
ex293500 90 |
20 |
Toluenesulphonamides |
0 % |
31.12.2018 |
|
ex293500 90 |
23 |
N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4) |
0 % |
31.12.2016 |
|
ex293500 90 |
25 |
Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7) |
0 % |
31.12.2018 |
|
ex293500 90 |
27 |
Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9) |
0 % |
31.12.2016 |
|
ex293500 90 |
28 |
N-Fluorobenzenesulphonimide (CAS RN 133745-75-2) |
0 % |
31.12.2018 |
|
ex293500 90 |
30 |
Mixture of isomers consisting of N-ethyltoluene-2-sulphonamide and N-ethyltoluene-4-sulphonamide |
0 % |
31.12.2014 |
|
ex293500 90 |
35 |
Chlorsulfuron (ISO) (CAS RN 64902-72-3) |
0 % |
31.12.2018 |
|
ex293500 90 |
40 |
Imazosulfuron (ISO), of a purity by weight of 98 % or more (CAS RN 122548-33-8) |
0 % |
31.12.2015 |
|
ex293500 90 |
42 |
Penoxsulam (ISO) (CAS RN 219714-96-2) |
0 % |
31.12.2015 |
|
ex293500 90 |
45 |
Rimsulfuron (ISO) (CAS RN 122931-48-0) |
0 % |
31.12.2018 |
|
ex293500 90 |
48 |
(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid – 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4) |
0 % |
31.12.2016 |
|
ex293500 90 |
50 |
4,4′-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3) |
0 % |
31.12.2018 |
|
ex293500 90 |
53 |
2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4) |
0 % |
31.12.2014 |
|
ex293500 90 |
55 |
Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3) |
0 % |
31.12.2018 |
|
ex293500 90 |
63 |
Nicosulphuron (ISO), of a purity by weight of 91 % or more (CAS RN 111991-09-4) |
0 % |
31.12.2014 |
|
ex293500 90 |
65 |
Tribenuron-methyl (ISO) (CAS RN 101200-48-0) |
0 % |
31.12.2018 |
|
ex293500 90 |
75 |
Metsulfuron-methyl (ISO) (CAS RN 74223-64-6) |
0 % |
31.12.2018 |
|
ex293500 90 |
77 |
[[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7) |
0 % |
31.12.2014 |
|
ex293500 90 |
82 |
N-(5,7-Dimethoxy[1,2,4]triazolo[1,5-a]pyrimidin-2-yl)-2-methoxy-4-(trifluoromethyl)pyridine-3-sulphonamide, (CAS RN 422556-08-9) |
0 % |
31.12.2014 |
|
ex293500 90 |
85 |
N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex293500 90 |
88 |
N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3) |
0 % |
31.12.2018 |
|
ex293500 90 |
89 |
3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0) |
0 % |
31.12.2016 |
|
ex293890 30 |
10 |
Ammonium glycyrrhizate (CAS RN 53956-04-0) |
0 % |
31.12.2015 |
|
ex293890 90 |
10 |
Hesperidin (CAS RN 520-26-3) |
0 % |
31.12.2018 |
|
ex293890 90 |
20 |
Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0) |
0 % |
31.12.2018 |
|
ex294120 30 |
10 |
Dihydrostreptomycin sulphate (CAS RN 5490-27-7) |
0 % |
31.12.2016 |
|
ex310250 00 |
10 |
Natural sodium nitrate |
0 % |
31.12.2017 |
|
3201 20 00 |
Wattle extract |
0 % |
31.12.2018 |
|
|
ex320190 90 |
20 |
Tanning extracts derived from gambier and myrobalan fruits |
0 % |
31.12.2018 |
|
ex320411 00 |
15 |
Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex320411 00 |
20 |
Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight |
0 % |
31.12.2015 |
|
ex320411 00 |
30 |
Preparation of dispersion dyes, containing: — C.I. Disperse Orange 61, — C.I. Disperse Blue 291:1, — C.I. Disperse Violet 93:1, — C.I. Disperse Red 54 |
0 % |
31.12.2015 |
|
▼M1 ————— |
||||
|
*ex320411 00 |
40 |
Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320411 00 |
50 |
Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320411 00 |
60 |
Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320411 00 |
70 |
Colourant C.I. Disperse Red 343 (CAS RN 99035-78-6) and preparations based thereon with a colourant C.I. Disperse Red 343 content of 95 % or more by weight |
0 % |
31.12.2017 |
|
ex320411 00 |
80 |
Dye preparation, non-ionogenic, containing: — N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine (CAS RN 159010-67-0) — N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN 170222-39-6) and — N-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine (CAS RN 371921-34-5) |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320412 00 |
10 |
Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight |
0 % |
31.12.2016 |
|
ex320412 00 |
20 |
Dye preparation, anionic, containing by weight 75 % or more of disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalenesulfonate (CAS RN 145703-76-0) |
0 % |
31.12.2017 |
|
ex320412 00 |
30 |
Acid dye preparation, anionic, containing: — lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-sulfonate (CAS RN 125328-86-1), — C.I. Acid Green 25 (CAS RN 4403-90-1) and — C.I. Acid Blue 80 (CAS RN 4474-24-2) |
0 % |
31.12.2017 |
|
ex320412 00 |
40 |
Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0) |
0 % |
31.12.2018 |
|
ex320412 00 |
50 |
Colourant C.I. Acid Blue 80 (CAS RN 4474-24-2) and preparations based thereon with a colourant C.I. Acid Blue 80 content of 99 % or more by weight |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex320413 00 |
10 |
Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight |
0 % |
31.12.2016 |
|
ex320413 00 |
20 |
(2,2′-(3,3′-Dioxidobiphenyl-4,4′-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS RN 159604-94-1) |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320413 00 |
30 |
Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320413 00 |
40 |
Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320415 00 |
10 |
Colourant C.I. Vat Orange 7 (C.I.Pigment Orange 43) (CAS RN 4424-06-0) and preparations based thereon with a colourant C.I. Vat Orange 7 (C.I.Pigment Orange 43) content of 20 % or more by weight |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320415 00 |
60 |
Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight |
0 % |
31.12.2018 |
|
ex320415 00 |
70 |
Colourant C.I. Vat Red 1 (CAS RN 2379-74-0) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
10 |
Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight |
0 % |
31.12.2018 |
|
ex320417 00 |
13 |
Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
15 |
Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
20 |
Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
25 |
Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
30 |
Colourant C.I. Pigment Yellow 97 (CAS RN 12225-18-2) and preparations based thereon with a colourant C.I. Pigment Yellow 97 content of 30 % or more by weight |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
35 |
Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
40 |
Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight |
0 % |
31.12.2014 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
50 |
Colourant C.I. Pigment Yellow 180 (CAS RN 77804-81-0) and preparations based thereon with a colourant C.I. Pigment Yellow 180 content of 90 % or more by weight |
0 % |
31.12.2014 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
60 |
Colourant C.I. Pigment Red 53:1 (CAS RN 5160-02-1) and preparations based thereon with a colourant C.I. Pigment Red 53:1 content of 50 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
65 |
Colourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53 content of 50 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
70 |
Colourant C.I. Pigment Yellow 13 (CAS RN 5102-83-0 or CAS RN 15541-56-7) and preparations based thereon with a colourant C.I. Pigment Yellow 13 content of 60 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
75 |
Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
80 |
Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
85 |
Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320417 00 |
88 |
Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight |
0 % |
31.12.2017 |
|
ex320419 00 |
11 |
Photochromic dye, 3-(4-butoxyphenyl-6,7-dimethoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile |
0 % |
31.12.2014 |
|
ex320419 00 |
21 |
Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-yl)morpholine (CAS RN 1021540-64-6) |
0 % |
31.12.2014 |
|
ex320419 00 |
31 |
Photochromic dye, N-hexyl -6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carboxamide |
0 % |
31.12.2014 |
|
ex320419 00 |
41 |
Photochromic dye, 4,4′-(13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-3,3-diyl)diphenol |
0 % |
31.12.2014 |
|
ex320419 00 |
43 |
Photochromic dye, bis(2-(4-(7-methoxy-3-(4-methoxyphenyl)-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenoxy)ethyl) decanedioate (CUS 0133724-2) (5) |
0 % |
31.12.2018 |
|
ex320419 00 |
47 |
Photochromic dye, 4-(4-(13,13-dimethyl-3,11-diphenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl)morpholine (CUS 0133726-4) (5) |
0 % |
31.12.2018 |
|
ex320419 00 |
51 |
Photochromic dye, 4-(4-(6,11-difluoro-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f ]chromen-3-yl)phenyl)morpholine (CAS RN 1360882-72-6) |
0 % |
31.12.2014 |
|
ex320419 00 |
53 |
Photochromic dye, 3-(4-butoxyphenyl)-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile (CUS 0133725-3) (5) |
0 % |
31.12.2018 |
|
ex320419 00 |
55 |
Photochromic dye, 4, 4′-(7-methoxy-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2, 1-f]chromene-3, 3-diyl)diphenol (CUS 0133728-6) (5) |
0 % |
31.12.2018 |
|
ex320419 00 |
57 |
Photochromic dye, bis(2-{4-[11-cyano-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl]phenoxy}ethyl) decanedioate (CUS 0133729-7) (5) |
0 % |
31.12.2018 |
|
ex320419 00 |
61 |
Photochromic dye, 3-(4-butoxyphenyl)-6,7-dimethoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f ]chromene (CAS RN 1021540-61-3) |
0 % |
31.12.2014 |
|
ex320419 00 |
63 |
Photochromic dye, 1-{4-(6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl}piperidine (CUS 0133727-5) (5) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex320419 00 |
70 |
Colourant C.I. Solvent Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Solvent Red 49:2 content of 90 % or more by weight |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex320419 00 |
71 |
Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53 content of 95 % or more by weight |
0 % |
31.12.2015 |
|
▼M1 ————— |
||||
|
*ex320419 00 |
73 |
Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight |
0 % |
31.12.2015 |
|
▼M1 ————— |
||||
|
*ex320419 00 |
77 |
Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320419 00 |
84 |
Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320419 00 |
85 |
Colourant C.I. Solvent Red HPR (CAS RN 75198-96-8) and preparations based thereon with a colourant C.I. Solvent Red HPR content of 95 % or more by weight |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex320420 00 |
20 |
Colourant C.I. Fluorescent Brightener 71 (CAS RN 16090-02-1) and preparations based thereon with a colourant C.I. Fluorescent Brightener 71 content of 94 % or more by weight |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex320420 00 |
30 |
Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight |
0 % |
31.12.2016 |
|
ex320420 00 |
40 |
Disodium 5-[[4-anilino-6-[2-hydroxyethyl(methyl)amino]-1,3,5-triazin-2-yl]amino]-2-[(E)-2-[4-[[4-anilino-6-[2-hydroxyethyl(methyl)amino]-1,3,5-triazin-2-yl]amino]-2-sulfonatophenyl]ethenyl]benzenesulphonate (CAS RN 13863-31-5) |
0 % |
31.12.2018 |
|
ex320500 00 |
10 |
Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry (1) |
0 % |
31.12.2018 |
|
ex320500 00 |
20 |
Dye C.I. Carbon Black 7 Lake |
0 % |
31.12.2016 |
|
ex320611 00 |
10 |
Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate |
0 % |
31.12.2018 |
|
ex320619 00 |
10 |
Preparation containing by weight: — 72 % (± 2 %) of mica (CAS RN 12001-26-2) and — 28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7) |
0 % |
31.12.2016 |
|
ex320642 00 |
10 |
Lithopone (CAS RN 1345-05-7) |
0 % |
31.12.2018 |
|
ex320649 70 |
10 |
Non aqueous dispersion, containing by weight: — 57 % or more but not more than 63 % of aluminium oxide (CAS RN 1344-28-1) — 37 % or more but not more than 42 % of titanium dioxide (CAS RN13463-67-7), and — 1 % or more but not more than 2 % of triethoxycaprylyl silane (CAS RN 2943-75) |
0 % |
31.12.2018 |
|
3206 50 00 |
Inorganic products of a kind used as luminophores |
0 % |
31.12.2018 |
|
|
ex320730 00 |
10 |
Preparation containing: — not more than 85 % by weight of silver, — not less than 2 % by weight of palladium, — barium titanate, — terpineol, and — ethyl cellulose, used for screen printing in the manufacture of multilayer ceramic capacitors (1) |
0 % |
31.12.2018 |
|
ex320740 85 |
20 |
Glass flakes coated with silver, of an average diameter of 40 (± 10) μm |
0 % |
31.12.2018 |
|
ex320740 85 |
40 |
Glass flakes (CAS RN 65997-17-3): — of a thickness of 0,3 μm or more but not more than 10 μm, and — coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5) |
0 % |
31.12.2017 |
|
ex320810 90 ex370790 90 |
10 60 |
Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer |
0 % |
31.12.2018 |
|
ex320820 10 |
10 |
Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer |
0 % |
31.12.2018 |
|
ex320820 10 |
20 |
Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether |
0 % |
31.12.2018 |
|
ex320890 19 |
10 |
Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex320890 19 |
15 |
Chlorinated polyolefins, in a solution |
0 % |
31.12.2018 |
|
ex320890 19 ex320890 91 |
25 20 |
Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight |
0 % |
31.12.2017 |
|
ex320890 19 |
35 |
Silicones containing 50 % by weight or more of xylene of a kind used for the manufacture of long term surgical implants |
0 % |
31.12.2018 |
|
ex320890 19 |
40 |
Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane |
0 % |
31.12.2018 |
|
ex320890 19 ex382490 97 |
45 61 |
Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate |
0 % |
31.12.2018 |
|
ex320890 19 |
50 |
Solution containing by weight: — (65 ± 10) % of γ-butyrolactone, — (30 ± 10) % of polyamide resin, — (3,5 ± 1,5) % of naphthoquinone ester derivative and — (1,5 ± 0,5) % of arylsilicic acid |
0 % |
31.12.2018 |
|
ex320890 19 |
60 |
Copolymer of hydroxystyrene with one or more of the following: — styrene — alkoxystyrene — alkylacrylates dissolved in ethyl lactate |
0 % |
31.12.2016 |
|
ex320890 19 |
75 |
Acenaphthalene copolymer in ethyl lactate solution |
0 % |
31.12.2017 |
|
ex320890 99 |
10 |
Solution based on chemically modified natural polymers, containing two or more of the following dyes: — methyl 8′-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3′-naphtho[2,1-b][1,4]oxazine]-9′-carboxylate, — methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate, — 13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol, — ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate, — 13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol |
0 % |
31.12.2018 |
|
ex321511 00 ex321519 00 |
10 10 |
Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments |
0 % |
31.12.2018 |
|
ex321519 00 |
20 |
Ink: — consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9), — with a total solid content by weight of 55 % or more, but not more than 57 %, and — with a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3, used to imprint electrodes (1) |
0 % |
31.12.2017 |
|
ex321590 00 |
10 |
Ink formulation, for use in the manufacture of ink-jet cartridges (1) |
0 % |
31.12.2018 |
|
ex321590 00 |
20 |
Heat sensitive ink fixed on a plastic film |
0 % |
31.12.2018 |
|
ex321590 00 |
30 |
Disposable cartridge ink, containing by weight: — 5 % or more, but not more than 10 % of amorphous silicon dioxide or — 3,8 % or more of dye C.I. Solvent Black 7 in organic solvents for use in the marking of integrated circuits (1) |
0 % |
31.12.2018 |
|
ex321590 00 |
40 |
Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with: — wax; — a vinyl-based polymer and — a colouring agent for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices (1) |
0 % |
31.12.2015 |
|
3301 12 10 |
Essential oil of orange, not deterpenated |
0 % |
31.12.2018 |
|
|
ex340211 90 |
10 |
Sodium lauroyl methyl isethionate |
0 % |
31.12.2015 |
|
ex340213 00 |
10 |
Vinyl copolymer surface active agent based on polypropylene glycol |
0 % |
31.12.2018 |
|
ex340213 00 |
20 |
Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated |
0 % |
31.12.2017 |
|
ex340213 00 |
30 |
Polyoxyethylated-12-hydroxystearic acid (CAS RN 70142–34–6) |
0 % |
31.12.2018 |
|
ex340290 10 |
20 |
Mixture of docusate sodium (INN) and sodium benzoate |
0 % |
31.12.2018 |
|
ex340290 10 |
30 |
Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1) |
0 % |
31.12.2015 |
|
ex340290 10 |
50 |
Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol) |
0 % |
31.12.2015 |
|
ex340290 10 |
60 |
Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane |
0 % |
31.12.2014 |
|
ex340290 10 |
70 |
Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1) |
0 % |
31.12.2014 |
|
ex340399 00 |
10 |
Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides |
0 % |
31.12.2018 |
|
ex350400 90 |
10 |
Avidin (CAS RN 1405-69-2) |
0 % |
31.12.2014 |
|
ex350510 50 |
20 |
O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch (CAS RN 9005-27-0) |
0 % |
31.12.2018 |
|
ex350691 00 |
10 |
Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA) |
0 % |
31.12.2018 |
|
ex350691 00 |
30 |
Two component microencapsulated epoxy adhesive dispersed in a solvent |
0 % |
31.12.2018 |
|
ex350691 00 |
40 |
Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330) |
0 % |
31.12.2014 |
|
ex360100 00 |
10 |
Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators (1) |
0 % |
31.12.2016 |
|
ex370130 00 |
10 |
Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm |
0 % |
31.12.2018 |
|
ex370130 00 |
20 |
Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total thickness of more than 0,43 mm but not more than 3,18 mm |
0 % |
31.12.2014 |
|
▼M1 ————— |
||||
|
*ex370199 00 |
10 |
Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, of a kind used for goods of heading 8541 or 8542 |
0 % |
31.12.2018 |
|
ex370590 90 |
10 |
Photomasks for photographically transferring circuit diagram patterns onto semiconductor wafers |
0 % |
31.12.2014 |
|
ex370710 00 |
10 |
Photosensitive emulsion for the sensitization of silicon discs (1) |
0 % |
31.12.2018 |
|
ex370710 00 |
15 |
Sensitising emulsion consisting of: — by weight not more than 12 % of diazooxonapthtalenesulphonic acid ester — phenolic resins in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone |
0 % |
31.12.2018 |
|
ex370710 00 |
25 |
Sensitising emulsion containing: — phenolic or acrylic resins — a maximum 2 % by weight of light sensitive acid precursor, in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate |
0 % |
31.12.2018 |
|
ex370710 00 |
30 |
Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate |
0 % |
31.12.2018 |
|
ex370710 00 ex370790 90 |
35 70 |
Sensitising emulsion or preparation containing one or more of: — acrylate polymers, — methacrylate polymers, — derivatives of styrene polymers, containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex370710 00 |
40 |
Sensitising emulsion, containing: — not more than 10 % by weight of naphthoquinonediazide esters, — 2 % or more but not more than 35 % by weight of copolymers of hydroxystyrene — not more than 7 % by weight of epoxy-containing derivatives dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate |
0 % |
31.12.2016 |
|
ex370710 00 |
45 |
Photosensitive emulsion consisting of cyclized polyisoprene containing: — 55 % or more but not more than 75 % by weight of xylene and — 12 % or more but not more than 18 % by weight of ethylbenzene |
0 % |
31.12.2014 |
|
ex370710 00 |
50 |
Photosensitive emulsion containing by weight: — 20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives, — 25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate, — 5 % or more but not more than 30 % of acrylates, — not more than 12 % of a photoinitiator |
0 % |
31.12.2014 |
|
ex370710 00 |
55 |
Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N-ethyl-2-pyrrolidon with a polymer content by weight 10 % or more |
0 % |
31.12.2018 |
|
ex370790 20 |
10 |
Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1) |
0 % |
31.12.2018 |
|
ex370790 20 |
20 |
Dry ink powder or toner blend, based on a polyol resin, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1) |
0 % |
31.12.2018 |
|
ex370790 20 |
40 |
Dry ink powder or toner blend, based on a polyester resin, manufactured by a polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1) |
0 % |
31.12.2018 |
|
ex370790 20 |
50 |
Dry ink powder or toner blend, consisting of: — styrene acrylate/butadiene copolymer — either carbon black or an organic pigment — whether or not containing polyolefin or amorphous silica for use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers (1) |
0 % |
31.12.2017 |
|
ex370790 90 |
10 |
Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in a solution in two or three of the following substances: — 2-methoxy-1-methylethyl acetate (CAS RN 108-65-6) — 1-methoxypropan-2-ol (CAS RN 107-98-2) — ethyl lactate (CAS RN 97-64-3) |
0 % |
31.12.2018 |
|
ex370790 90 |
40 |
Anti-reflection coating, in the form of an aqueous solution, containing by weight not more than: — 2 % of halogen-free alkyl sulphonic acid, and — 5 % of a fluorinated polymer |
0 % |
31.12.2014 |
|
ex370790 90 |
80 |
Anti-reflection coating, consisting of either a siloxane polymer or an organic polymer having a phenolic hydroxy group modified with a chromophore group, in the form of a solution of an organic solvent containing either 1-ethoxy-2-propanol or 2-methoxy-1-methylethyl acetate containing by weight not more than 10 % of polymer |
0 % |
31.12.2015 |
|
ex370790 90 |
85 |
Rolls, containing: — a dry layer of a photosensitive acrylic resin, — on one side a poly(ethylene terephthalate) protecting foil and — on the other side a polyethylene protecting foil |
0 % |
31.12.2014 |
|
ex380190 00 |
10 |
Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6) |
0 % |
31.12.2016 |
|
ex380290 00 |
11 |
Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products (1) |
0 % |
31.12.2017 |
|
3805 90 10 |
Pine oil |
1,7 % |
31.12.2018 |
|
|
ex380610 00 ex390940 00 |
20 50 |
Rosin modified phenolic resin, — containing 60 % or more but not more than 75 % by weight of rosin, — with an acid value of not more than 25, of a kind used in offset printing |
0 % |
31.12.2016 |
|
ex380891 90 |
10 |
Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex380891 90 |
30 |
Preparation containing endospores or spores and protein crystals derived from either: — Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or, — Bacillus thuringiensis subsp. kurstaki or, — Bacillus thuringiensis subsp. israelensis or, — Bacillus thuringiensis subsp. aizawai or, — Bacillus thuringiensis subsp. tenebrionis |
0 % |
31.12.2014 |
|
ex380891 90 |
40 |
Spinosad (ISO) |
0 % |
31.12.2018 |
|
ex380891 90 |
60 |
Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3′-ethoxy-5,6-dihydro spinosyn J) and (3′-ethoxy- spinosyn L) |
0 % |
31.12.2017 |
|
ex380892 90 |
10 |
Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale |
0 % |
31.12.2018 |
|
ex380892 90 |
30 |
Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight: — 24 % or more but not more than 26 % of pyrithione zinc (INN), or — 39 % or more but not more than 41 % of pyrithione zinc (INN) |
0 % |
31.12.2018 |
|
ex380892 90 |
50 |
Preparations based on copper pyrithione (CAS RN 14915-37-8) |
0 % |
31.12.2014 |
|
ex380893 15 |
10 |
Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension |
0 % |
31.12.2017 |
|
ex380893 23 |
10 |
Herbicide containing flazasulfuron (ISO) as an active ingredient |
0 % |
31.12.2014 |
|
ex380893 27 |
40 |
Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight: — 30 % or more of tepraloxydim (ISO) and — not more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons |
0 % |
31.12.2016 |
|
ex380893 90 |
10 |
Preparation, in the form of granules, containing by weight: — 38,8 % or more but not more than 41,2 % of Gibberellin A3, or — 9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7 |
0 % |
31.12.2014 |
|
ex380893 90 |
20 |
Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight: — 1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine of a kind used in plant growth regulators |
0 % |
31.12.2015 |
|
ex380893 90 |
30 |
Aqueous solution containing by weight: — 1,8 % of sodium para-nitrophenolate, — 1,2 % of sodium ortho-nitrophenolate, — 0,6 % of sodium 5-nitroguaiacolate for use in the manufacture of a plant growth regulator (1) |
0 % |
31.12.2015 |
|
ex380893 90 |
40 |
Mixed white powder containing by weight: — 3 % or more but not more than 3,6 % of 1-methylcyclopropene with a purity more than 96 % and — containing less than 0,05 % of each impurity of 1-chloro-2-methylpropene and 3-chloro-2-methylpropene for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator (1) |
0 % |
31.12.2015 |
|
ex380893 90 |
50 |
Preparation in the form of powder, containing by weight: — 55 % or more of Gibberellin A4, — 1 % or more but not more than 35 % of Gibberellin A7, — 90 % or more of Gibberellin A4 and Gibberellin A7 combined — not more than 10 % of a combination of water and other naturally occurring Gibberellins of a kind used in plant growth regulators |
0 % |
31.12.2015 |
|
ex380899 90 |
10 |
Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water |
0 % |
31.12.2015 |
|
ex380899 90 |
20 |
Abamectin (ISO) (CAS RN 71751-41-2) |
0 % |
31.12.2018 |
|
ex380991 00 |
10 |
Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl) methylphosphonate |
0 % |
31.12.2018 |
|
ex380992 00 |
20 |
Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol |
0 % |
31.12.2014 |
|
ex381010 00 |
10 |
Soldering or welding paste, consisting of a mixture of metals and resin containing by weight: — 70 % or more, but not more than 90 % of tin — not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium for use in the electro technical industry (1) |
0 % |
31.12.2018 |
|
ex381119 00 |
10 |
Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than: — 4,9 % of 1,2,4-trimethyl-benzene, — 4,9 % of naphthalene, and — 0,5 % of 1,3,5-trimethyl-benzene |
0 % |
31.12.2014 |
|
ex381121 00 |
10 |
Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils |
0 % |
31.12.2018 |
|
ex381121 00 |
13 |
Additives containing: — borated magnesium (C16-C24) alkylbenzene sulphonates and — mineral oils, having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381121 00 |
15 |
Additives, consisting of: — zinc bis[bis(tetrapropylenephenyl)] bis(hydrogen dithiophosphate) (CAS RN 11059-65-7), — triphenyl thiophosphate (CAS RN 597-82-0), — triphenyl phosphite (CAS RN 101-02-0), and — mineral oils, for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381121 00 |
17 |
Additives containing: — mainly sulphurized diisobutylene, — calcium sulphonate, — dialkylaminoalkyl polyisobutylene succinate, and — mineral oils, for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381121 00 |
20 |
Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil |
0 % |
31.12.2018 |
|
ex381121 00 |
25 |
Additives containing: — a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10,000 but not more than 20,000, and — more than 15 %, but not more than 30 % by weight of mineral oils, for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381121 00 |
27 |
Additives containing: — 20 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 4-(4-nitrophenylazo)aniline and 3-nitroaniline, and — mineral oils, for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381121 00 |
30 |
Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process |
0 % |
31.12.2017 |
|
ex381121 00 |
33 |
Additives containing: — calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and — mineral oils, having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381121 00 |
35 |
Additives containing: — o-amino polyisobutylenephenol (CAS RN 78330-13-9), — polyisobutylene succinimide (CAS RN 84605-20-9), — alkenylimidazoline (CAS RN 68784-17-8), — nonylated diphenylamine derivatives (CAS RN 36878-20-3 and CAS RN 27177-41-9), and — more than 30 %, but not more than 45 % by weight of mineral oils, for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381121 00 |
37 |
Additives containing: — a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and — more than 50 % but not more than 75 % by weight of mineral oils, for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381121 00 |
40 |
Additives for lubricating oils, containing mineral oils, based on a mixture of dodecylphenol sulphide calcium salts (CAS RN 68784-26-9), used as a concentrated additive for the manufacture of engine oils through a blending process |
0 % |
31.12.2017 |
|
ex381121 00 |
43 |
Additives containing: — borated succinimide compounds (CAS RN 134758-95-5), and — mineral oils, having a total base number (TBN) greater than 40, for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381121 00 |
45 |
Additives containing: — an (C8-18) alkyl methacrylate and N-[3-(dimethylamino)propyl]methacrylamide copolymer, — an ethylene-propylene copolymer, — an ethylene-propylene copolymer chemically modified with succinic anhydride, 4-(4-nitrophenyl) aniline and 3-nitroaniline, and — more than 15 % but not more than 30 % by weight of mineral oils, whether or not containing a methacrylic pour point depressant polymer, for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381121 00 |
50 |
Additives for lubricating oils, — based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0), — containing mineral oils, used as a concentrated additive for the manufacture of engine oils through a blending process |
0 % |
31.12.2017 |
|
ex381121 00 |
60 |
Additives for lubricating oils, containing mineral oils, — based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %, — with a total base number (TBN) of 280 or more but not more than 320, used as a concentrated additive for the manufacture of engine oils through a blending process |
0 % |
31.12.2017 |
|
ex381121 00 |
70 |
Additives for lubricating oils, — containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), — containing mineral oils, — with a chlorine content by weight of 0,05 % or more but not more than 0,25 %, — with a total base number (TBN) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex381129 00 |
20 |
Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils |
0 % |
31.12.2017 |
|
ex381129 00 |
30 |
Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex381129 00 |
40 |
Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils |
0 % |
31.12.2017 |
|
ex381129 00 |
50 |
Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process |
0 % |
31.12.2017 |
|
ex381129 00 |
60 |
Additives containing: — mainly sulphurized diisobutylene, — calcium sulphonate, and — dialkylaminoalkyl polyisobutylene succinate for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381129 00 |
70 |
Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381129 00 |
80 |
Additives containing: — more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and — more than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3), for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381129 00 |
85 |
Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils (1) |
0 % |
31.12.2018 |
|
ex381190 00 |
10 |
Dinonylnaphthylsulphonic acid salt, in a mineral oil solution |
0 % |
31.12.2018 |
|
ex381190 00 |
40 |
Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % 2-ethylhexanol |
0 % |
31.12.2017 |
|
ex381210 00 |
10 |
Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7) |
0 % |
31.12.2016 |
|
ex381220 90 |
10 |
Plasticizer, containing: — bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2) — more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0) |
0 % |
31.12.2018 |
|
ex381230 80 |
20 |
Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate |
0 % |
31.12.2018 |
|
ex381230 80 |
25 |
UV photo stabiliser containing: — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2); — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1); — polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3) — bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and — methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7) |
0 % |
31.12.2018 |
|
ex381230 80 |
30 |
Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol |
0 % |
31.12.2014 |
|
ex381230 80 |
35 |
Mixture containing by weight: — 25 % or more but not more than 50 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9) — not more than 20 % of other organic compounds — on a carrier of polypropylene (CAS RN 9003-07-0) |
0 % |
31.12.2018 |
|
ex381230 80 |
40 |
Mixture of: — 80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and — 20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate |
0 % |
31.12.2018 |
|
ex381230 80 |
55 |
UV-stabilizer, containing: — 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and — either N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or — N,N′-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7) |
0 % |
31.12.2016 |
|
ex381230 80 |
60 |
Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotriazolyl)-5-(1,1-di-methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-17-9) |
0 % |
31.12.2016 |
|
ex381230 80 |
65 |
Stabiliser for plastic material containing: — 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), — 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and — 2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1) |
0 % |
31.12.2016 |
|
ex381230 80 |
70 |
Light stabiliser containing: — branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and — 1-methoxy-2-propyl acetate (CAS RN 108-65-6) |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
ex381230 80 |
80 |
UV-stabilizer, consisting of: — a hindered amine: N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and — either an o-hydroxyphenyl triazine UV light absorber or — a chemically modified phenolic compound |
0 % |
31.12.2017 |
|
ex381400 90 |
20 |
Mixture containing by weight: — 69 % or more but not more than 71 % of 1-methoxypropan-2-ol, — 29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate |
0 % |
31.12.2018 |
|
ex381400 90 |
40 |
Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether |
0 % |
31.12.2018 |
|
ex381512 00 |
10 |
Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver |
0 % |
31.12.2018 |
|
ex381519 90 |
10 |
Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method) |
0 % |
31.12.2016 |
|
ex381519 90 |
15 |
Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile (1) |
0 % |
31.12.2018 |
|
ex381519 90 |
25 |
Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde (1) |
0 % |
31.12.2018 |
|
ex381519 90 |
30 |
Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene (1) |
0 % |
31.12.2018 |
|
ex381519 90 |
40 |
Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid (1) |
0 % |
31.12.2018 |
|
ex381519 90 |
60 |
Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide |
0 % |
31.12.2014 |
|
ex381519 90 |
65 |
Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide |
0 % |
31.12.2018 |
|
ex381519 90 |
70 |
Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide |
0 % |
31.12.2018 |
|
ex381519 90 |
75 |
Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide |
0 % |
31.12.2018 |
|
ex381519 90 |
80 |
Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil |
0 % |
31.12.2018 |
|
ex381519 90 |
85 |
Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder |
0 % |
31.12.2018 |
|
ex381519 90 |
86 |
Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins (1) |
0 % |
31.12.2018 |
|
ex381519 90 ex850690 00 |
87 10 |
Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) (1) |
0 % |
31.12.2016 |
|
ex381590 90 |
16 |
Initiator based on dimethylaminopropyl urea |
0 % |
31.12.2017 |
|
ex381590 90 |
18 |
Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO′)-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3) |
0 % |
31.12.2017 |
|
ex381590 90 |
20 |
Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight: — 20 % or more but not more than 30 % of titanium and — 55 % or more but not more than 72 % of chlorine |
0 % |
31.12.2018 |
|
ex381590 90 |
27 |
Catalyst, in the form of hollow cylinders with a length of 5 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, bismuth, iron and nickel, containing also a charge of silicon dioxide, for use in the manufacture of acrylic acid (1) |
0 % |
31.12.2018 |
|
ex381590 90 |
30 |
Catalyst, consisting of a suspension in mineral oil of: — tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride; and — silicon dioxide — containing 6,6 % (± 0,6 %) by weight of magnesium, and — containing 2,3 % (± 0,2 %) by weight of titanium |
0 % |
31.12.2015 |
|
ex381590 90 |
33 |
Catalyst, consisting of a mixture of different alkylnaphthalene sulphonic acids, with aliphatic hydrocarbon chains, containing 12 – 56 carbon atoms |
0 % |
31.12.2018 |
|
ex381590 90 |
50 |
Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium |
0 % |
31.12.2018 |
|
ex381590 90 |
70 |
Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols |
0 % |
31.12.2014 |
|
ex381590 90 |
71 |
Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol |
0 % |
31.12.2016 |
|
ex381590 90 |
80 |
Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol |
0 % |
31.12.2014 |
|
ex381590 90 |
81 |
Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate |
0 % |
31.12.2018 |
|
ex381590 90 |
85 |
Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins (1) |
0 % |
31.12.2017 |
|
ex381590 90 |
86 |
Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide |
0 % |
31.12.2018 |
|
ex381590 90 |
88 |
Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis: — 4 % or more but not more than 10 % of titanium and — 10 % or more but not more than 20 % magnesium |
0 % |
31.12.2018 |
|
ex381590 90 |
89 |
Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1) |
0 % |
31.12.2016 |
|
ex381700 50 |
10 |
Mixture of alkylbenzenes (C14-26) containing by weight: — 35 % or more but not more than 60 % of eicosylbenzene, — 25 % or more but not more than 50 % of docosylbenzene, — 5 % or more but not more than 25 % of tetracosylbenzene |
0 % |
31.12.2018 |
|
ex381700 80 |
10 |
Mixture of alkylnaphthalenes, containing by weight: — 88 % or more but not more than 98 % of hexadecylnaphthalene — 2 % or more but not more than 12 % of dihexadecylnaphthalene |
0 % |
31.12.2018 |
|
ex381700 80 |
20 |
Mixture of branched alkyl benzenes mainly containing dodecyl benzenes |
0 % |
31.12.2018 |
|
ex381700 80 |
30 |
Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms |
0 % |
31.12.2016 |
|
ex381900 00 |
20 |
Fire resistant hydraulic fluid based on phosphate ester |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex382319 30 *ex382319 30 |
20 30 |
Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of: — industrial monocarboxylic fatty acids of heading 3823, — stearic acid of heading 3823, — stearic acid of heading 2915, — palmitic acid of heading 2915, or — animal feed preparations of heading 2309 (1) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex382319 90 *ex382319 90 |
20 30 |
Palm acid oils from refining for use in the manufacture of: — industrial monocarboxylic fatty acids of heading 3823, — stearic acid of heading 3823, — stearic acid of heading 2915, — palmitic acid of heading 2915, or — animal feed preparations of heading 2309 (1) |
0 % |
31.12.2018 |
|
ex382490 15 |
10 |
Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets |
0 % |
31.12.2018 |
|
ex382490 97 |
05 |
Mixture of methylmethacrylate monomer and butylacrylate monomer in a solution of xylene and butylacetate, containing by weight more than 54 % but not more than 56 % of solvents |
0 % |
31.12.2014 |
|
ex382490 97 |
06 |
Paraffin with a level of chlorination of 70 % or more |
0 % |
31.12.2014 |
|
ex382490 97 |
07 |
Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material |
0 % |
31.12.2014 |
|
ex382490 97 |
08 |
Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0) |
0 % |
31.12.2014 |
|
ex382490 97 |
09 |
Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: — on a support of mineral wax, whether or not modified chemically, or — in the form of a solution in an organic solvent |
0 % |
31.12.2018 |
|
ex382490 97 |
10 |
Calcined bauxite (refractory grade) |
0 % |
31.12.2018 |
|
ex382490 97 |
11 |
Mixture of phytosterols, not in powder form, containing by weight: — 40 % or more but not more than 58 % of beta-sitosterols — 20 % or more but not more than 28 % of campesterols — 14 % or more but not more than 23 % of stigmasterols — 0 % or more but not more than 15 % of other sterols |
0 % |
31.12.2014 |
|
ex382490 97 |
12 |
Oligomer of tetrafluoroethylene, having one iodoethyl end-group |
0 % |
31.12.2018 |
|
ex382490 97 |
13 |
Preparations containing not less than 92 % but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate |
0 % |
31.12.2016 |
|
ex382490 97 |
14 |
Calcium phosphonate phenate, dissolved in mineral oil |
0 % |
31.12.2016 |
|
ex382490 97 |
15 |
Structured silica alumina phosphate |
0 % |
31.12.2014 |
|
ex382490 97 |
16 |
Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea |
0 % |
31.12.2018 |
|
ex382490 97 |
17 |
Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 % |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex382490 97 |
18 |
Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8) |
0 % |
31.12.2014 |
|
ex382490 97 |
20 |
Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and: — either an aluminium-alkyl compound, — or an organic complex of tungsten — or an organic complex of molybdenum |
0 % |
31.12.2018 |
|
ex382490 97 |
21 |
Mixture of 2-propenoic acid, (1-methylethylidene)bis(4,1-phenyleneoxy-2,1-ethanediyloxy-2,1-ethanediyl)ester with 2-propenoic acid, (2,4,6-trioxo-1,3,5-triazine-1,3,5(2H,4H,6H)-triyl)tri-2,1-ethanediyl ester and 1-hydroxy-cyclohexyl-phenyl ketone in the solution of methyl ethyl ketone and toluene |
0 % |
31.12.2014 |
|
ex382490 97 |
22 |
Preparations containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol |
0 % |
31.12.2016 |
|
ex382490 97 |
23 |
Mixture of urethane acrylates, tripropylene glycoldiacrylate, ethoxylated bisphenol A acrylate and poly(ethyleneglycol) 400 diacrylate |
0 % |
31.12.2014 |
|
ex382490 97 |
24 |
Solution of (chloromethyl)bis(4-fluorophenyl)methylsilane of a nominal concentration of 65 % in toluene |
0 % |
31.12.2015 |
|
ex382490 97 |
25 |
Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene |
0 % |
31.12.2018 |
|
ex382490 97 |
26 |
Aqueous dispersion, containing by weight: — 76 % (± 0,5 %) of silicon carbide (CAS RN 409-21-2) — 4,6 % (± 0,05 %) of aluminium oxide (CAS RN 1344-28-1) and — 2,4 % (± 0,05 %) of yttrium oxide (CAS RN 1314-36-9) |
0 % |
31.12.2016 |
|
ex382490 97 |
27 |
Preparation, consisting of a mixture of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and propan-2-ol |
0 % |
31.12.2015 |
|
ex382490 97 |
28 |
Preparation containing by weight: — 85 % or more but not more than 95 % of α-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and — 5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate |
0 % |
31.12.2015 |
|
ex382490 97 |
29 |
Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors (1) |
0 % |
31.12.2018 |
|
ex382490 97 |
30 |
2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated |
0 % |
31.12.2014 |
|
ex382490 97 |
31 |
Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran |
0 % |
31.12.2015 |
|
ex382490 97 |
32 |
Mixture of: — basic zirconium carbonate (CAS RN 57219-64-4) and — cerium carbonate (CAS RN 537-01-9) |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex382490 97 |
33 |
Preparation, containing: — trioctylphosphine oxide (CAS RN 78-50-2), — dioctylhexylphosphine oxide (CAS RN 31160-66-4), — octyldihexylphosphine oxide (CAS RN 31160-64-2) and — trihexylphosphine oxide (CAS RN 3084-48-8) |
0 % |
31.12.2016 |
|
*ex382490 97 |
34 |
Zinc Dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder |
0 % |
31.12.2018 |
|
ex382490 97 |
35 |
Mixture of: — 3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) and — ethyl-6′-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9′-[9H]xanthene]-2′-carboxylate (CAS RN 154306-60-2) |
0 % |
31.12.2017 |
|
ex382490 97 |
36 |
Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0) |
0 % |
31.12.2017 |
|
ex382490 97 |
37 |
Liquid crystal mixture for use in the manufacture of displays (1) |
0 % |
31.12.2017 |
|
ex382490 97 |
38 |
Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses (1) |
0 % |
31.12.2017 |
|
ex382490 97 |
39 |
Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid |
0 % |
31.12.2018 |
|
ex382490 97 |
40 |
Azelaic acid of a purity by weight of 75 % or more but not more than 85 % |
0 % |
31.12.2014 |
|
ex382490 97 |
41 |
Preparation, consisting of: — dipropylene glycol — tripropylene glycol — tetrapropylene glycol and — pentapropylene glycol |
0 % |
31.12.2017 |
|
ex382490 97 |
42 |
Mixed metals oxides, in the form of powder, containing by weight: — either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium, — or 30 % or more of lead and 5 % or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors (1) |
0 % |
31.12.2018 |
|
ex382490 97 |
43 |
Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators |
0 % |
31.12.2017 |
|
ex382490 97 |
44 |
Mixture of phytosterols, not in the form of powder, containing by weight: — 75 % or more of sterols, — not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters (1) |
0 % |
31.12.2017 |
|
ex382490 97 |
45 |
Preparations consisting predominantly of ethylene glycol and: — either diethylene glycol, dodecandioic acid and ammonia water, — or N,N-dimethylformamide, — or γ-butyrolactone, — or silicon oxide, — or ammonium hydrogen azelate, — or ammonium hydrogen azelate and silicon oxide, — or dodecandioic acid, ammonia water and silicon oxide, for the manufacture of electrolytic capacitors (1) |
0 % |
31.12.2018 |
|
ex382490 97 |
46 |
Additives for paints and coatings, containing: — a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and — 30 % or more but not more than 35 % by weight of isobutyl alcohol |
0 % |
31.12.2018 |
|
ex382490 97 |
47 |
Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight: — 0,1 % or more but not more than 1 % of platinum, and — 0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9) |
0 % |
31.12.2017 |
|
ex382490 97 |
49 |
Preparation containing: — C,C′-azodi(formamide) (CAS RN 123-77-3), — magnesium oxide (CAS RN 1309-48-4) and — zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6) in which the gas formation from C,C′-azodi(formamide) occurs at 135 °C |
0 % |
31.12.2017 |
|
ex382490 97 |
50 |
Powder mixture containing by weight: — 85 % or more of zinc diacrylate (CAS RN 14643-87-9) — and not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7) |
0 % |
31.12.2018 |
|
ex382490 97 |
51 |
Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6) |
0 % |
31.12.2017 |
|
ex382490 97 |
52 |
Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units |
0 % |
31.12.2014 |
|
ex382490 97 |
53 |
Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units |
0 % |
31.12.2014 |
|
ex382490 97 |
54 |
2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile |
0 % |
31.12.2018 |
|
ex382490 97 |
55 |
Preparation consisting of: — 50 % (± 2 %) by weight of bis-alkoxylated ethyl acetoacetate aluminium chelates, — in an ink oil (white mineral) solvent with a boiling point of 160 °C or more but not more than 180 °C |
0 % |
31.12.2018 |
|
ex382490 97 |
56 |
Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran |
0 % |
31.12.2018 |
|
ex382490 97 |
57 |
Carrier in powder form, consisting of: — Ferrite (Iron oxide) (CAS RN 1309-37-1) — Manganese oxide (CAS RN 1344-43-0) — Magnesium oxide (CAS RN 1309-48-4) — Styrene acrylate copolymer to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers (1) |
0 % |
31.12.2018 |
|
ex382490 97 |
58 |
N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 % |
0 % |
31.12.2015 |
|
ex382490 97 |
59 |
3′,4′,5′-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3′,4′,5′-trifluorobiphenyl-2-amine |
0 % |
31.12.2015 |
|
ex382490 97 |
60 |
α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] |
0 % |
31.12.2018 |
|
ex382490 97 |
62 |
Fused magnesia containing by weight 15 % or more of dichromium trioxide |
0 % |
31.12.2016 |
|
ex382490 97 |
63 |
Catalyst containing by weight of — 52 % (± 10 %) of Cuprous Oxide (CAS RN 1317-39-1), — 38 % (± 10 %) of Cupric Oxide (CAS RN 1317-38-0) and — 10 % (± 5 %) of Metallic Copper (CAS RN 7440-50-8) |
0 % |
31.12.2018 |
|
ex382490 97 |
64 |
Aluminium sodium silicate, in the form of spheres of a diameter of: — either 1,6mm or more but not more than 3,4mm, — or 4mm or more but not more than 6mm |
0 % |
31.12.2018 |
|
ex382490 97 |
65 |
Preparation containing by weight: — 89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol — 0,1 % or more but not more than 1 % of colorants — 1 % or more but not more than 10 % of fluoropolymers |
0 % |
31.12.2016 |
|
ex382490 97 |
66 |
Mixture of primary tert-alkylamines |
0 % |
31.12.2014 |
|
ex382490 97 |
78 |
Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder with a particle size not more than 300 μm, containing by weight: — 60 % or more, but not more than 80 % of sitosterols, — not more than 15 % of campesterols, — not more than 5 % of stigmasterols, — not more than 15 % of betasitostanols |
0 % |
31.12.2017 |
|
ex382490 97 |
79 |
Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine |
0 % |
31.12.2014 |
|
ex382490 97 |
80 |
Preparation consisting of: — 80 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4) and — 10 % or more but not more than 20 % by weight of toluene (CAS RN 108-88-3) |
0 % |
31.12.2018 |
|
ex382490 97 |
81 |
N-(2-phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7) |
0 % |
31.12.2018 |
|
ex382490 97 |
82 |
α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] |
0 % |
31.12.2018 |
|
ex382490 97 |
83 |
C6-24 and C16-18-unsaturated fatty acid esters with sucrose (sucrose polysoyate) (CAS RN 93571-82-5) |
0 % |
31.12.2018 |
|
ex382490 97 |
84 |
Reaction product, containing by weight: — 1 % or more but not more than 40 % of molybdenum oxide, — 10 % or more but not more than 50 % of nickel oxide, — 30 % or more but not more than 70 % of tungsten oxide |
0 % |
31.12.2014 |
|
ex382490 97 ex390690 90 |
85 87 |
Aqueous solution of polymers and ammonia consisting of: — 0,1 % or more but not more than 0,5 % by weight of ammonia (CAS RN 1336-21-6) and — 0,3 % or more but not more than 10 % by weight of polycarboxylate (linear polymers of acrylic acid) |
0 % |
31.12.2018 |
|
ex382490 97 |
87 |
Paste containing by weight: — 75 % or more, but not more than 85 % of copper, — inorganic oxides, — ethyl cellulose, and — a solvent |
0 % |
31.12.2017 |
|
ex382490 97 |
88 |
Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1′-oxybis(2-chloroethane) |
0 % |
31.12.2014 |
|
ex382490 97 |
89 |
Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups |
0 % |
31.12.2018 |
|
ex382490 97 |
90 |
Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics: — a melting point of between 1 600 °C and 1 800 °C, — a density of 0,6 - 0,8 g/cm3, for use in the manufacture of particle filters in motor vehicles (1) |
0 % |
31.12.2018 |
|
ex382490 97 |
92 |
Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide |
0 % |
31.12.2014 |
|
ex382490 97 |
94 |
Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1) |
0 % |
31.12.2018 |
|
ex382490 97 |
95 |
Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols |
0 % |
31.12.2014 |
|
ex382490 97 |
97 |
Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents |
0 % |
31.12.2018 |
|
ex382600 10 ex382600 10 |
20 29 |
Mixture of fatty acid methyl esters containing by weight at least: — 65 % or more but not more than 75 % of C12 FAME, — 21 % or more but not more than 28 % of C14 FAME, — 4 % or more but not more than 8 % of C16 FAME, for use in the manufacture of detergents and home and personal care products (1) |
0 % |
31.12.2018 |
|
ex382600 10 ex382600 10 |
30 39 |
Mixture of fatty acid methyl esters containing by weight at least: — 50 % or more but not more than 58 % of C8-FAME — 35 % or more but not more than 50 % of C10-FAME for use in the manufacture of agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components (1) |
0 % |
31.12.2018 |
|
ex382600 10 ex382600 10 |
40 49 |
Mixture of fatty acid methyl esters containing by weight at least: — 15 % or more but not more than 32 % of C16 FAME — 65 % or more but not more than 85 % of C18 FAME for use in the manufacture of detergents and home and personal cleaning products, agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components (1) |
0 % |
31.12.2018 |
|
ex390110 10 |
10 |
Linear low-density polyethylene/LLDPE (CAS RN 9002-88-4) in the form of powder, with — 5 % or less by weight of comonomer, — a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and — a density of 0,924 g/cm3 or more, but not more than 0,928 g/cm3 |
0 % |
31.12.2018 |
|
ex390110 90 |
20 |
Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a haze value not more than 6 % and an elongation at break (MD/TD) of 210/340 (1) |
0 % |
31.12.2018 |
|
ex390110 90 |
30 |
Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper |
0 % |
31.12.2016 |
|
ex390120 90 |
10 |
Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon (1) |
0 % |
31.12.2018 |
|
ex390120 90 |
20 |
Polyethylene, containing by weight 35 % or more but not more than 45 % of mica |
0 % |
31.12.2018 |
|
ex390130 00 |
80 |
Ethylene-vinyl acetate copolymer, — containing 27,8 % or more but not more than 29,3 % by weight of vinyl acetate — with a melt flow index of 22 g/10 min or more but no more than 28 g/10 min — containing not more than 15 mg/kg vinyl acetate monomer |
0 % |
31.12.2015 |
|
ex390130 00 |
82 |
Ethylene-vinyl acetate copolymer, — containing 9,8 % or more but not more than 10,8 % by weight of vinyl acetate — with a melt flow index of 2,5 g/10 min or more but no more than 3,5 g/10 min — containing not more than 15 mg/kg vinyl acetate monomer |
0 % |
31.12.2015 |
|
ex390190 90 |
30 |
Linear low-density polyethylene/LLDPE (CAS RN 9002-88-4) in the form of powder, with — more than 5 %, but not more than 8 % by weight of comonomer, — a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and — a density of 0,924 g/cm3 or more, but not more than 0,928 g/cm3 |
0 % |
31.12.2018 |
|
ex390190 90 |
40 |
Copolymer of ethylene and 1-hexene only (CAS RN 25213-02-9): — containing more than 5 % but not more than 20 % by weight of 1-hexene, — of a specific gravity of not more than 0,93, — manufactured using a metallocene catalyst |
0 % |
31.12.2018 |
|
ex390190 90 |
80 |
Block copolymer of ethylene with octene in the form of pellets: — with a specific gravity of 0,862 or more, but not more than 0,865, — able to stretch to at least 200 % its original length, — with a hysteresis of 50 % (± 10 %), — with permanent deformation of not more than 20 %, for use in the manufacture of napkin liners for babies (1) |
0 % |
31.12.2015 |
|
ex390190 90 |
82 |
Copolymer of ethylene and methacrylic acid |
0 % |
31.12.2015 |
|
ex390190 90 |
91 |
Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid |
4 % |
31.12.2018 |
|
ex390190 90 |
92 |
Chlorosulphonated polyethylene |
0 % |
31.12.2018 |
|
ex390190 90 |
93 |
Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets (1) |
0 % |
31.12.2018 |
|
ex390190 90 |
94 |
Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene |
0 % |
31.12.2018 |
|
ex390190 90 |
97 |
Chlorinated polyethylene, in the form of powder |
0 % |
31.12.2018 |
|
ex390210 00 |
10 |
Polypropylene containing no plasticizer and not more than: — 7 mg/kg of aluminium, — 2 mg/kg of iron, — 1 mg/kg of magnesium, — 8 mg/kg of chloride |
0 % |
31.12.2018 |
|
ex390210 00 |
20 |
Polypropylene, containing no plasticiser, — of a melting point of more than 150 °C (as determined by the ASTM D 3 417 method), — of a heat of fusion of 15 J/g or more but not more than 70 J/g, — of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method), — of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method) |
0 % |
31.12.2018 |
|
ex390210 00 |
30 |
Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses (1) |
0 % |
31.12.2018 |
|
ex390210 00 |
40 |
Polypropylene, containing no plasticizer: — of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method); — of a flexural strength of 50-90 MPa (as determined by the ASTM D790 method); — of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method); — with 40 % or more but not more than 80 % by weight of polypropylene, — with 10 % or more but not more than 30 % by weight of glass fibre, — with 10 % or more but not more than 30 % by weight of mica |
0 % |
31.12.2014 |
|
ex390210 00 |
50 |
High isotactic polypropylene (HIPP), whether or not coloured, intended for the manufacture of plastic components for air freshener with the following properties: — a density of 0,880 g/cm3 or more but not more than 0,913 g/cm3(as determined by test method ASTM D1505), — a tensile strength at yield of 350 kg/cm2 or more but not more than 390 kg/cm2 (as determined by test method ASTM D638) — a heat deflection temperature of 135 °C or more under load of 0,45 MPa (as determined by test method ASTM 648) (1) |
0 % |
31.12.2015 |
|
ex390220 00 |
10 |
Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800 |
0 % |
31.12.2018 |
|
ex390220 00 |
20 |
Hydrogenated polyisobutene, in liquid form |
0 % |
31.12.2018 |
|
ex390230 00 |
91 |
A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
31.12.2018 |
|
ex390230 00 |
95 |
A-B-A block copolymer, consisting of: — a copolymer of propylene and ethylene and — 21 % (± 3 %) by weight of polystyrene |
0 % |
31.12.2016 |
|
ex390230 00 |
97 |
Liquid ethylene-propylene-copolymer with: — a flashpoint of 250 °C or more, — a viscosity index of 150 or more, — of a number average molecular weight (Mn) of 650 or more |
0 % |
31.12.2016 |
|
ex390290 90 |
52 |
Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin |
0 % |
31.12.2018 |
|
ex390290 90 |
55 |
Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene |
0 % |
31.12.2018 |
|
ex390290 90 |
60 |
Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics: — liquid at room temperature — obtained by cationic polymerisation of C-5 alkenes monomers — with a number average molecular weight (Mn) of 370 (± 50) — with a weight average molecular weight (Mw) of 500 (± 100) |
0 % |
31.12.2014 |
|
ex390290 90 |
84 |
Blend of hydrogenated styrenic block copolymer, polyethylene wax, and tackifier resin, in the form of pellets, containing by weight: — 70 (± 5) % of styrenic block copolymer, — 15 (± 5) % of polyethylene wax, and — 15 (± 5) % of tackifier resin with the following physical properties: — able to stretch to at least 200 % of its original length — with a hysteresis of 50 (± 10) % — with a permanent deformation of no more than 20 % for use in the manufacture of napkins and napkin liners for babies (1) |
0 % |
31.12.2015 |
|
ex390290 90 |
92 |
Polymers of 4-methylpent-1-ene |
0 % |
31.12.2018 |
|
ex390290 90 |
93 |
Synthetic poly-alpha-olefin having a viscosity of at least 38 × 10–6m2s–1 (38 centistokes) at 100 °C measured using the ASTM D 445 method |
0 % |
31.12.2016 |
|
*ex390290 90 |
94 |
Chlorinated polyolefins, whether or not in a solution or dispersion |
0 % |
31.12.2018 |
|
ex390290 90 |
98 |
Synthetic poly-alpha-olefin with a viscosity at 100 ° Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene |
0 % |
31.12.2016 |
|
ex390311 00 |
10 |
White expandable polystyrene beads with a thermal conductivity of not more than 0,034 W/mK at a density of 14,0 kg/m3 (± 1,5 kg/m3), containing 50 % recycled material |
0 % |
31.12.2018 |
|
ex390319 00 |
30 |
Crystalline polystyrene with a melting point of 268 °C or more but not more than 272 °C and a setting point of 232 °C or more but not more than 242 °C, whether or not containing additives and filling material |
0 % |
31.12.2016 |
|
ex390390 90 |
10 |
Butadiene-styrene copolymer pellets or granules, with: — a specific gravity of 1,05 (± 0,02), — a melt flow index at 200 °C/5 kg of 13 g/10 min (± 1 g/10 min) |
0 % |
31.12.2016 |
|
ex390390 90 |
15 |
Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, n-butyl methacrylate, methacrylic acid and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1) |
0 % |
31.12.2016 |
|
ex390390 90 |
20 |
Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, n-butyl methacrylate and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1) |
0 % |
31.12.2016 |
|
ex390390 90 |
25 |
Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, methacrylic acid and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1) |
0 % |
31.12.2016 |
|
ex390390 90 |
30 |
Butadiene-styrene copolymer pellets or granules with a melting point of 85 °C (± 5 °C), containing by weight: — 2 % or more but not more than 4 % of tris(tribromophenyl) triazine, — 5 % or more but not more than 10 % of ethane-1,2-bis(pentabromophenyl), — 3 % or more but not more than 5 % of antimony trioxide |
0 % |
31.12.2016 |
|
ex390390 90 ex391190 99 |
35 43 |
Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C |
0 % |
31.12.2018 |
|
ex390390 90 ex391190 99 |
40 50 |
Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 6 000 |
0 % |
31.12.2018 |
|
ex390390 90 |
50 |
Crystalline copolymer of styrene and p-methylstyrene: — with a melting point of 240 °C or more but not more than 260 °C, — containing 5 % or more but not more than 15 % by weight of p-methylstyrene |
0 % |
31.12.2015 |
|
ex390390 90 ex391190 99 |
60 60 |
Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4 500, in flake or powder form |
0 % |
31.12.2016 |
|
ex390390 90 |
75 |
Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % of sodium dodecyl sulphate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 3305 20 00 or of hair dyes of subheading 3305 90 (1) |
0 % |
31.12.2014 |
|
ex390390 90 |
80 |
Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight: — minimum 65 % styrene, — maximum 25 % divinylbenzene for use in the manufacture of ion exchange resins (1) |
0 % |
31.12.2018 |
|
ex390390 90 |
86 |
Mixture containing by weight: — 45 % or more but not more than 65 % of polymers of styrene — 35 % or more but not more than 45 % of poly(phenylene ether) — not more than 10 % of other additives and with one or more of the following special colour effects: — metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment — fluorescent, as characterized by emitting light during absorption of ultraviolet radiation — bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale |
0 % |
31.12.2018 |
|
ex390410 00 |
20 |
Poly(vinyl chloride) powder, not mixed with any other substances or containing any vinyl acetate monomers, with: — a degree of polymerisation of 1 000 (± 300) monomer units, — a coefficient of heat transmission (K-value) of 60 or more, but not more than 70, — a volatile material content of less than 2,00 % by weight, — a sieve non-passing fraction at a mesh width of 120 μm of not more than 1 % by weight, for use in the manufacture of battery separators (1) |
0 % |
31.12.2014 |
|
ex390430 00 |
20 |
Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight: — 80,5 % or more but not more than 81,5 % of vinyl chloride, — 16,5 % or more but not more than 17,5 % of vinyl acetate and — 1,5 % or more but not more than 2,5 % of maleic acid, for use in the heat-sealing of plastics onto steel substrate for industrial uses (1) |
0 % |
31.12.2014 |
|
ex390430 00 ex390440 00 |
30 91 |
Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: — 87 % or more but not more than 92 % of vinyl chloride, — 2 % or more but not more than 9 % of vinyl acetate and — 1 % or more but not more than 8 % of vinyl alcohol, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1) |
0 % |
31.12.2018 |
|
ex390440 00 |
93 |
Copolymer of vinyl chloride and methyl acrylate, containing by weight 80 % (± 1 %) of vinyl chloride and 20 % (± 1 %) of methyl acrylate, in the form of a aqueous emulsion |
0 % |
31.12.2018 |
|
ex390450 90 |
92 |
Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments (1) |
0 % |
31.12.2014 |
|
ex390461 00 |
20 |
Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions |
0 % |
31.12.2018 |
|
ex390461 00 |
30 |
Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not more than 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm |
0 % |
31.12.2018 |
|
ex390469 80 |
81 |
Poly(vinylidene fluoride) (CAS RN 24937-79-9) |
0 % |
31.12.2015 |
|
ex390469 80 |
85 |
Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers |
0 % |
31.12.2017 |
|
ex390469 80 |
93 |
Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
31.12.2018 |
|
ex390469 80 |
94 |
Copolymer of ethylene and tetrafluoroethylene |
0 % |
31.12.2018 |
|
ex390469 80 |
96 |
Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 |
0 % |
31.12.2018 |
|
ex390469 80 |
97 |
Copolymer of chlorotrifluoroethylene and vinylidene difluoride |
0 % |
31.12.2018 |
|
ex390530 00 |
10 |
Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors (1) |
0 % |
31.12.2017 |
|
ex390591 00 |
20 |
Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 13 % of the monomer unit ethylene |
0 % |
31.12.2017 |
|
ex390599 90 |
92 |
Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water |
0 % |
31.12.2018 |
|
ex390599 90 |
95 |
Hexadecylated or eicosylated polyvinylpyrrolidone |
0 % |
31.12.2018 |
|
ex390599 90 |
96 |
Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25 000 or more but not more than 150 000 and containing by weight: — 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and — 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol |
0 % |
31.12.2018 |
|
ex390599 90 |
97 |
Povidone (INN)-iodine (CAS RN 25655-41-8) |
0 % |
31.12.2018 |
|
ex390599 90 |
98 |
Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups |
0 % |
31.12.2018 |
|
3906 90 60 |
Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide |
0 % |
31.12.2018 |
|
|
ex390690 90 |
10 |
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004 (1) |
0 % |
31.12.2018 |
|
ex390690 90 |
15 |
Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst (photoinitiator) and stabilizer |
0 % |
31.12.2018 |
|
ex390690 90 |
27 |
Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate |
0 % |
31.12.2017 |
|
ex390690 90 |
30 |
Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (Mn) of 500 or more but not more than 6 000 |
0 % |
31.12.2018 |
|
ex390690 90 |
35 |
White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18 μm, insoluble in water |
0 % |
31.12.2018 |
|
ex390690 90 |
40 |
Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with: — a viscosity of not more than 50 000 Pa·s at 120 °C as determined by the test method ASTM D 3835 — a weight average molecular weight (Mw) of more than 500 000 but not more than 1 200 000 according to the Gel Permeation Chromatography (GPC) test, — a residual monomer content of less than 1 % |
0 % |
31.12.2015 |
|
ex390690 90 |
41 |
Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30 |
0 % |
31.12.2014 |
|
ex390690 90 |
45 |
Acrylonitrile-butadiene-styrene-methylmethacrylate copolymer pellets with: — a melting point of 96 °C (± 3 °C), — a specific gravity of 1,03 or more but not more than 1,07, and containing by weight: — 25 % or more but not more than 50 % of acrylonitrile-butadiene-styrene, and — 50 % or more but not more than 75 % of methylmethacrylate |
0 % |
31.12.2016 |
|
ex390690 90 |
50 |
Polymers of esters of acrylic acid with one or more of the following monomers in the chain: — chloromethyl vinyl ether, — chloroethyl vinyl ether, — chloromethylstyrene, — vinyl chloroacetate, — methacrylic acid, — butenedioic acid monobutyl ester, containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
31.12.2018 |
|
ex390690 90 |
65 |
Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC) |
0 % |
31.12.2018 |
|
ex390690 90 |
80 |
Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates) |
0 % |
31.12.2018 |
|
ex390690 90 |
85 |
Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends |
0 % |
31.12.2014 |
|
ex390720 11 |
10 |
Poly(ethylene oxide) of a number average molecular weight (Mn) of 100 000 or more |
0 % |
31.12.2018 |
|
ex390720 11 |
20 |
Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40 000 |
0 % |
31.12.2018 |
|
ex390720 11 |
40 |
Polyethylene glycol with an ethylene oxide chain length of not more than 30, having butyl-2-cyano 3-(4-hydroxyphenyl) acrylate end groups, for use as a UV barrier in liquid masterbatches (1) |
0 % |
31.12.2015 |
|
ex390720 11 |
50 |
[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-hydroxypoly(oxo-1,2-ethanediyl) (CAS RN 104810-48-2) |
0 % |
31.12.2016 |
|
ex390720 11 |
60 |
Preparation containing: — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1) |
0 % |
31.12.2016 |
|
ex390720 20 |
20 |
Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2 700 or more but not more than 3 100 (CAS RN 25190-06-1) |
0 % |
31.12.2017 |
|
ex390720 20 |
30 |
Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone |
0 % |
31.12.2018 |
|
ex390720 20 |
40 |
Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3 500 (± 100) |
0 % |
31.12.2018 |
|
ex390720 99 |
15 |
Poly(oxypropylene) having alkoxysilyl end-groups |
0 % |
31.12.2018 |
|
ex390720 99 |
30 |
Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) |
0 % |
31.12.2018 |
|
ex390720 99 |
35 |
Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate |
0 % |
31.12.2018 |
|
ex390720 99 |
45 |
Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups |
0 % |
31.12.2018 |
|
ex390720 99 |
50 |
Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient |
0 % |
31.12.2018 |
|
ex390720 99 |
55 |
Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5 000 |
0 % |
31.12.2018 |
|
ex390720 99 |
60 |
Polytetramethylene oxide di-p-aminobenzoate |
0 % |
31.12.2016 |
|
ex390720 99 |
65 |
L-Lysine N-hydroxysuccinimidyl ester.alpha.,.epsilon.-bis(polyethylene glycol monomethylether carbamate) (CAS RN 266318-38-1) of a number average molecular weight (Mn) of 38 000 or more but not more than 40 000 |
0 % |
31.12.2018 |
|
ex390730 00 ex392690 97 |
40 70 |
Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 8548 (1) |
0 % |
31.12.2018 |
|
ex390730 00 |
50 |
Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with: — a zinc borate hydrate content of not more than 40 % by weight, — a diantimony trioxide content of not more than 5 % by weight |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex390730 00 |
60 |
Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5) |
0 % |
31.12.2017 |
|
ex390740 00 |
10 |
Polycarbonate pellets or granules: — containing 7 % or more but not more than 15 % by weight of non halogen flame retardant, and — with a specific gravity of 1,20 (± 0,01) |
0 % |
31.12.2016 |
|
ex390740 00 |
20 |
Polycarbonate pellets or granules with a specific gravity of 1,32 (± 0,03), containing 20 % (± 5 %) of glass fibre |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex390740 00 |
30 |
Polycarbonate pellets or granules with a specific gravity of 1,18 or more but not more than 1,25, containing by weight: — 77 % or more but not more than 90 % of polycarbonate, — 8 % or more but not more than 20 % of phosphoric acid ester, — 0,1 % or more but not more than 1 % of antioxidant, and whether or not containing 1 % or more but not more than 5 % of flame retardant |
0 % |
31.12.2016 |
|
ex390740 00 |
40 |
Polycarbonate granules with: — a melt flow rate of 18 g/10 min/300 °C/1,2 kg (according to ASTM D 1238) — a tensile strength of 69 MPa according to ASTM D 638 and — a flexural strength of 112 MPa according to ASTM D 790 |
0 % |
31.12.2016 |
|
ex390740 00 |
50 |
Polycarbonate resin, pellets or granules, with: — a specific gravity of 1,20 (± 0,05), — a heat deflection temperature of 146 °C (± 3 °C) at 4,6 kgf/cm2, and — a melt flow index of 20 (± 10) g/10 min at 300 °C/1,2 kg |
0 % |
31.12.2016 |
|
ex390740 00 |
60 |
Polycarbonate acrylonitrile-butadiene-styrene pellets or granules with specific gravity of 1,20 (± 0,05), containing by weight: — 65 % or more but not more than 90 % of polycarbonate, — 5 % or more but not more than 15 % of acrylonitrile-butadiene-styrene, — 5 % or more but not more than 20 % of phosphoric acid ester and, — 0,1 % or more but not more than 5 % of antioxidant |
0 % |
31.12.2016 |
|
ex390760 80 |
10 |
Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol |
0 % |
31.12.2018 |
|
ex390760 80 |
30 |
Oxygen binding concentrate consisting of a blend of: — a copolymer obtained from poly(ethylene terephthalate), pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene — a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, and — organic dyes and/or organic and inorganic pigments where the first co-polymer predominates |
0 % |
31.12.2014 |
|
ex390760 80 |
40 |
Poly(ethylene terephthalate) pellets or granules: — with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, and — containing not more than 10 % by weight of other modifiers or additives |
0 % |
31.12.2016 |
|
ex390760 80 |
50 |
Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of: — not more than 75 μm of polyethylene, — not more than 50 μm of polyamide, — not more than 15 μm of polyethylene terephthalate and — not more than 9 μm of aluminium with a tensile strength of more than 70 N/15 mm and oxygen transmission rate of less than 0,1 cm3/m2/24 hrs at 0,1 MPa |
0 % |
31.12.2017 |
|
ex390760 80 |
60 |
Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups |
0 % |
31.12.2018 |
|
3907 70 00 |
Poly(lactic acid) |
0 % |
31.12.2018 |
|
|
ex390791 90 |
10 |
Diallyl phthalate prepolymer, in powder form |
0 % |
31.12.2014 |
|
ex390799 90 |
10 |
Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder |
0 % |
31.12.2018 |
|
ex390799 90 |
20 |
Liquid crystal copolyester with a melting point of not less than 270 °C, whether or not containing fillers |
0 % |
31.12.2018 |
|
ex390799 90 |
25 |
Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol |
0 % |
31.12.2017 |
|
ex390799 90 ex391390 00 |
30 20 |
Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) |
0 % |
31.12.2015 |
|
ex390799 90 |
60 |
Copolymer of terephthalic acid and isophthalic acid with bisphenol A |
0 % |
31.12.2017 |
|
ex390799 90 |
70 |
Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol |
0 % |
31.12.2014 |
|
ex390799 90 |
80 |
Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles |
0 % |
31.12.2015 |
|
ex390890 00 |
10 |
Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
31.12.2018 |
|
ex390890 00 |
30 |
Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine |
0 % |
31.12.2018 |
|
ex390890 00 |
50 |
Oxygen binding concentrate consisting of a blend of: — a copolymer obtained from poly(ethyleneterephthalate), pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene — a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, and — organic dyes and/or organic and inorganic pigments where the second co-polymer predominates |
0 % |
31.12.2014 |
|
ex390890 00 |
60 |
Copolymer consisting of: — hexanedioic acid — 12-aminododecanoic acid — hexahydro-2H-azepin-2-one, and — 1,6-hexanediamine |
0 % |
31.12.2017 |
|
ex390940 00 |
10 |
Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm |
0 % |
31.12.2018 |
|
ex390940 00 |
20 |
Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices (1) |
0 % |
31.12.2015 |
|
ex390940 00 |
30 |
Mixture of: — alkylphenol - formaldehyde resin, whether or not brominated, and — zinc oxide |
0 % |
31.12.2017 |
|
ex390940 00 |
40 |
Polymer in powder form with a content of: — phenolic resin polymer (CAS RN 9003-35-4) with 80 % by weight or more but not more than 90 % — phenol (CAS RN 108-95-2) with not more than 5 % and — hexamethylenetetramine (CAS RN 100-97-0) with 5 % by weight or more but not more than 15 % |
0 % |
31.12.2018 |
|
ex390950 90 |
10 |
UV curable water soluble liquid photopolymer consisting of a mixture by weight of — 60 % or more of two-functional acrylated polyurethane oligomers and — 30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and — 10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates |
0 % |
31.12.2014 |
|
ex391000 00 |
20 |
Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane] |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex391000 00 |
40 |
Silicones of a kind used in the manufacture of long term surgical implants |
0 % |
31.12.2016 |
|
ex391000 00 |
50 |
Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum |
0 % |
31.12.2017 |
|
ex391000 00 |
60 |
Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups |
0 % |
31.12.2014 |
|
ex391000 00 |
70 |
Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices |
0 % |
31.12.2018 |
|
ex391110 00 |
81 |
Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with: — an iodine value of more than 120 and — a Gardner Colour of more than 10 for the pure product or — a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166) |
0 % |
31.12.2018 |
|
ex391190 19 |
10 |
Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4′-biphenylene) |
0 % |
31.12.2018 |
|
ex391190 19 |
30 |
Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide |
0 % |
31.12.2017 |
|
ex391190 19 |
40 |
m- Xylene formaldehyde resin |
0 % |
31.12.2016 |
|
ex391190 99 |
25 |
Copolymer of vinyltoluene and α-methylstyrene |
0 % |
31.12.2018 |
|
ex391190 99 |
30 |
1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated |
0 % |
31.12.2015 |
|
ex391190 99 |
31 |
Copolymers of butadiene and maleic acid, whether or not containing its ammonium salts |
0 % |
31.12.2014 |
|
ex391190 99 |
35 |
Alternated copolymer of ethylene and maleic anhydride (EMA) |
0 % |
31.12.2015 |
|
ex391190 99 |
40 |
Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight |
0 % |
31.12.2018 |
|
ex391190 99 |
45 |
Copolymer of maleic acid and methyl vinyl ether |
0 % |
31.12.2018 |
|
ex391190 99 |
53 |
Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4) |
0 % |
31.12.2017 |
|
ex391190 99 |
57 |
Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0) |
0 % |
31.12.2017 |
|
ex391190 99 |
65 |
Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether |
0 % |
31.12.2018 |
|
ex391190 99 |
86 |
Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9) |
0 % |
31.12.2016 |
|
ex391211 00 |
30 |
Cellulose triacetate (CAS RN 9012-09-3) |
0 % |
31.12.2016 |
|
ex391211 00 |
40 |
Cellulose diacetate powder |
0 % |
31.12.2015 |
|
ex391220 11 |
10 |
Nitrocellulose (CAS RN 9004-70-0) |
0 % |
31.12.2016 |
|
ex391239 85 |
10 |
Ethylcellulose, not plasticized |
0 % |
31.12.2018 |
|
ex391239 85 |
20 |
Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose |
0 % |
31.12.2018 |
|
ex391239 85 |
30 |
Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms |
0 % |
31.12.2018 |
|
ex391239 85 |
40 |
Hypromellose (INN) (CAS RN 9004-65-3) |
0 % |
31.12.2016 |
|
ex391290 10 |
10 |
Cellulose acetate propionate, non-plasticised, in the form of powder: — containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) and — of a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method), for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings (1) |
0 % |
31.12.2018 |
|
ex391290 10 |
20 |
Hydroxypropyl methylcellulose phthalate |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex391390 00 |
85 |
Sterile sodium hyaluronate (CAS RN 9067-32-7) |
0 % |
31.12.2018 |
|
ex391390 00 |
92 |
Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100 000 to 300 000 |
0 % |
31.12.2018 |
|
ex391390 00 |
94 |
Granules containing by weight: — 35 % or more but less than 75 % of a high amylose extruded biopolymer produced from corn starch, — 5 % or more but less than 16 % polyvinyl alcohol, — 10 % or more but less than 46 % of polyol plasticisers, — 0,25 % or more but less than 3 % of stearic acid, — whether or not containing 30 % (± 10 %) of biodegradable polyester resin but never to a level that exceeds the amount of the high amylose biopolymer |
0 % |
31.12.2016 |
|
ex391390 00 |
95 |
Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9) |
0 % |
31.12.2018 |
|
ex391390 00 |
96 |
Powder consisting of 90 % (± 5 %) by weight of a high amylose extruded biopolymer produced from corn starch, 10 % (± 5 %) by weight of a synthetic polymer and 0,5 % (± 0,25 %) of stearic acid |
0 % |
31.12.2016 |
|
ex391620 00 |
91 |
Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives: — titanium dioxide — poly(methyl methacrylate) — calcium carbonate — binding agents |
0 % |
31.12.2014 |
|
ex391690 10 |
10 |
Rods with cellular structure, containing by weight: — polyamide-6 or poly(epoxy anhydride) — 7 % or more but not more than 9 % of polytetrafluorethylene if present — 10 % or more but not more than 25 % of inorganic fillers |
0 % |
31.12.2018 |
|
ex391732 00 |
91 |
Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not more than 110 μm |
0 % |
31.12.2018 |
|
ex391740 00 |
91 |
Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses |
0 % |
31.12.2014 |
|
ex391910 19 ex391910 80 ex391990 00 |
10 25 31 |
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film |
0 % |
31.12.2018 |
|
ex391910 19 |
20 |
Rolls of two-sided adhesive tape: — coated with non-vulcanised natural or synthetic rubber — with a width of 20 mm or more but not more than 40 mm — containing silicone, aluminium hydroxide, acryl and urethane |
0 % |
31.12.2018 |
|
ex391910 80 ex391990 00 ex392061 00 |
21 21 20 |
Reflecting sheet, consisting of: — a polycarbonate or acrylic polymer film totally embossed on one side in a regular shaped pattern, — covered on both sides with one or more layers of plastic material, — whether or not covered on one side with a self-adhesive layer and a release sheet |
0 % |
31.12.2018 |
|
ex391910 80 |
23 |
Reflecting film, consisting of several layers including: — poly(vinyl chloride); — polyurethane with, on one side, imprints against counterfeiting, alteration or substitution of data or duplication, and on the other side, a layer of glass microspheres; — a layer incorporating a security and/or official mark which changes appearance with angle of view; — metallized aluminium; — and adhesive, covered on one side with a release liner |
0 % |
31.12.2014 |
|
ex391910 80 ex391990 00 |
27 20 |
Polyester film: — coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and — on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner |
0 % |
31.12.2014 |
|
ex391910 80 |
30 |
Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm wide, 10 to 210 m long and with a total thickness of 10 to 50 μm, not for retail sale |
0 % |
31.12.2016 |
|
ex391910 80 |
32 |
Polytetrafluoroethylene film: — with a thickness of 110 μm or more, — with a surface resistance of between 102-1014 ohms as determined by test method ASTM D 257, — coated on one side with an acrylic pressure sensitive adhesive |
0 % |
31.12.2014 |
|
ex391910 80 |
35 |
Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film |
0 % |
31.12.2018 |
|
ex391910 80 |
37 |
Polytetrafluoroethylene film: — with a thickness of 100 μm or more, — an elongation at break of not more than 100 %, — coated on one side with a pressure sensitive silicon adhesive |
0 % |
31.12.2014 |
|
ex391910 80 ex391990 00 |
40 43 |
Black poly(vinyl chloride) film: — with a gloss of more than 30 degrees according to ASTM D2457, — whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner |
0 % |
31.12.2016 |
|
ex391910 80 ex391990 00 |
43 26 |
Ethylene vinyl acetate film: — of a thickness of 100 μm or more, — coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester liner |
0 % |
31.12.2014 |
|
ex391910 80 ex391990 00 |
45 45 |
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm |
0 % |
31.12.2017 |
|
ex391910 80 ex391990 00 |
47 32 |
Polyester, polyurethane or polycarbonate foil: — with pressure sensitive silicone polymer adhesive, — of a total thickness of not more than 0,7 mm, — of a total width of 1 cm or more, but not more than 1 m, — whether or not in rolls of a kind used for the protection of the surface of products of headings 8521 and 8528 |
0 % |
31.12.2017 |
|
ex391910 80 ex391990 00 ex392010 89 |
50 41 25 |
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs (1) |
0 % |
31.12.2018 |
|
ex391910 80 ex391990 00 ex392010 28 ex392010 89 |
53 34 93 50 |
Polyethylene foil: — with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, — of a total thickness of 0,025 mm or more, but not more than 0,7 mm, and — of a total width of 6 cm or more, but not more than 1 m, — whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521 and 8528 |
0 % |
31.12.2017 |
|
ex391910 80 ex391990 00 |
55 53 |
Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 ° of more than 25 N/cm (as determined by the ASTM D 3330 method) |
0 % |
31.12.2017 |
|
ex391910 80 |
60 |
Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet |
0 % |
31.12.2018 |
|
ex391910 80 ex391990 00 |
65 57 |
Self-adhesive reflecting sheet whether or not in segmented pieces: — showing a regular pattern, — with or without an application tape layer, — consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) containing microprisms, — whether or not containing an additional layer of polyester and — an adhesive with a final release sheet |
0 % |
31.12.2018 |
|
ex391910 80 ex391990 00 |
70 75 |
Rolls of polyethylene foil: — self-adhesive on one side, — of a total thickness of 0,025 mm or more, but not more than 0,09 mm, — of a total width of 60 mm or more, but not more than 1 110 mm, of a kind used for the protection of the surface of products of headings 8521 or 8528 |
0 % |
31.12.2016 |
|
ex391910 80 ex391990 00 |
75 80 |
Self-adhesive reflecting film, consisting of several layers including: — a copolymer of acrylic resin, — polyurethane, — a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, — glass microspheres, and — an adhesive layer, with a release liner on one or both sides |
0 % |
31.12.2016 |
|
ex391910 80 ex391990 00 |
80 83 |
Acrylic tape put up in rolls: — self-adhesive on both sides, — of a total thickness of 0,04 mm or more, but not more than 1,25 mm, — of a total width of 5 mm or more but not more than 1 205 mm for use in the manufacture of products of headings 8521 and 8528 (1) |
0 % |
31.12.2016 |
|
ex391910 80 ex391990 00 |
85 28 |
Poly(vinyl chloride) or polyethylene or any other polyolefine film: — of a thickness of 65 μm or more, — coated on one side with an acrylic UV-sensitive adhesive and a polyester liner |
0 % |
31.12.2014 |
|
ex391990 00 |
19 |
Transparent poly(ethylene terephthalate) self-adhesive film: — free from impurities or faults, — coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound, — whether or not with a printable dust-proof layer of modified long chain alkyl organic compound, — with a total thickness without the liner of 54 μm or more but not more than 64 μm, and — a width of more than 1 295 mm but not more than 1 305 mm |
0 % |
31.12.2018 |
|
ex391990 00 |
22 |
Black polypropylene film: — with a gloss of more than 20 degrees as determined by test method ASTM D2457, — whether or not covered on one side with a protective poly(ethylene terephthalate) film and on the other side with a pressure sensitive adhesive with channels and a release liner |
0 % |
31.12.2014 |
|
ex391990 00 |
23 |
Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner |
0 % |
31.12.2018 |
|
ex391990 00 |
24 |
Reflecting laminated sheet: — consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, — covered on both sides with one or more layers of plastic material and — covered on one side with an adhesive layer and a release sheet |
0 % |
31.12.2014 |
|
ex391990 00 |
25 |
Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner |
0 % |
31.12.2017 |
|
ex391990 00 |
27 |
Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm and an electrostatic discharge of not more than 500 V |
0 % |
31.12.2018 |
|
ex391990 00 |
29 |
Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) adhesive put up in rolls of a width of 45,7 cm or more but not more than 132 cm (supplied with a release liner) |
0 % |
31.12.2014 |
|
ex391990 00 |
33 |
Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm |
0 % |
31.12.2018 |
|
ex391990 00 |
35 |
Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: — a layer of polyurethane containing glass micro beads, — a layer of poly(ethylene vinyl acetate), — an adhesive layer, and — a release sheet |
0 % |
31.12.2018 |
|
ex391990 00 ex392049 10 |
36 95 |
Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride) — whether or not with a pressure or heat sensitive adhesive layer — whether or not with a release film — with a toxicity (as determined by test method ABD 0031) of not more than 70 ppm hydrogen fluoride, not more than 120 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together — with a flammability within 60 seconds of not more than 130 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83) — with a weight (without release film) of 240 g/m2 (± 30 g/m2) without adhesive layer, of 340 g/m2 (± 40 g/m2) with heat sensitive adhesive layer or of 330 g/m2 (± 40 gm2) with pressure sensitive layer |
0 % |
31.12.2017 |
|
ex391990 00 |
37 |
UV-absorbing film of poly (vinyl chloride): — with a thickness of 78 μm or more, — covered on one side with an adhesive layer and with a release sheet, — with an adhesive strength of 1 764 mN / 25 mm or more |
0 % |
31.12.2014 |
|
ex391990 00 |
38 |
Self-adhesive film composed of: — a top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide, — whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable vinyl acetate polymer emulsions, — not more than 6 % by weight of other additives, — a pressure sensitive adhesive; and — covered on one side with a release liner, — whether or not with a separate self-adhesive over laminate protective film, — of a total thickness of not more than 400 μm |
0 % |
31.12.2017 |
|
ex391990 00 |
39 |
Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100 μm |
0 % |
31.12.2018 |
|
ex391990 00 |
40 |
Film, with a total thickness of 40 μm or more, consisting of one or more layers of transparent polyester film: — containing at least one infrared reflective layer with a total normal reflectance according to EN 12898 of 80 % or more — having on one side a layer with a normal emissivity according to EN 12898 of not more than 0,2 — coated on the other side with a pressure sensitive adhesive and a release liner |
0 % |
31.12.2017 |
|
ex391990 00 |
42 |
Self-adhesive film composed of: — a first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent, — a second layer containing a maleic anhydride copolymer, — a third layer containing a mixture of low density polyethylene, titanium dioxide and additives, — a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment, — a pressure sensitive adhesive; and — covered on one side with a release liner — whether or not with a separate self-adhesive over laminate protective film — of a total thickness of not more than 400 μm |
0 % |
31.12.2017 |
|
ex391990 00 ex392190 60 |
44 95 |
Printed laminated sheet — with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride), — on one side covered with a layer of poly(vinyl fluoride), — whether or not with a pressure sensitive adhesive layer and a release film on the other side, — with a toxicity (as determined by test method ABD 0031) of not more than 50 ppm hydrogen fluoride, not more than 85 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together, — with a flammability within 60 seconds of not more than 110 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83), and — with a weight (without release film) of 490 g/m2 (± 45 g/m2) without adhesive layer or of 580 g/m2 (± 50 g/m2) with pressure sensitive layer |
0 % |
31.12.2017 |
|
ex391990 00 ex900120 00 |
47 40 |
Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side |
0 % |
31.12.2017 |
|
ex391990 00 |
49 |
Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet |
0 % |
31.12.2018 |
|
ex391990 00 |
51 |
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet |
0 % |
31.12.2018 |
|
ex391990 00 |
60 |
Reflecting film containing: — a poly(vinyl chloride) layer, — a polyurethane layer, — a glass microspheres layer, — a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view, — a metallised aluminium layer, and — an adhesive, covered on one side with a release liner |
0 % |
31.12.2015 |
|
ex391990 00 |
63 |
Co-extruded trilayer film, — each layer containing a mixture of polypropylene and polyethylene, — containing not more than 3 % by weight of other polymers, — whether or not containing titanium dioxide in the core layer, — coated with an acrylic pressure sensitive adhesive and — with a release liner — of an overall thickness of not more than 110 μm |
0 % |
31.12.2015 |
|
ex391990 00 |
65 |
Self-adhesive film with a thickness of 40 μm or more, but not more than 400 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner |
0 % |
31.12.2015 |
|
ex391990 00 |
67 |
Self-adhesive plastic film consisting of: — a poly(olefin) layer with a thickness of more than 95 but not more than 110 microns — an adhesive layer with a thickness of more than 5 but not more than 15 microns — a layer based on epoxy resin, with a thickness of more than 4 but not more than 100 microns — a liner consisting of poly(ethylene terephthalate) with a thickness of more than 35 but not more than 40 microns |
0 % |
31.12.2018 |
|
ex391990 00 |
70 |
Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad |
0 % |
31.12.2015 |
|
ex391990 00 |
81 |
Film of a minimum thickness of 0,36 mm, consisting of the following: — an embossed polyester layer, — a caprolactone-cyclohexylene isocyanate copolymer layer, — a pressure sensitive adhesive and covered on one side with a release liner |
0 % |
31.12.2018 |
|
ex391990 00 |
85 |
Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper: — having a minimum reflectance of 93,5 % as determined by ASTM G173-03, — covered on one side with a removable layer of polyethylene, — covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner |
0 % |
31.12.2016 |
|
ex391990 00 |
87 |
Self-adhesive transparent film, having a transmittance of more than 90 % and a haze of less than 3 % (as determined by ASTM D1003), consisting of several layers including: — an acrylic adhesive layer with a thickness of 20 μm or more but not more than 70 μm, — a polyurethane based layer with a thickness of 100 μm or more but not more than 300 μm |
0 % |
31.12.2016 |
|
ex392010 25 ex392010 89 |
10 20 |
Film of a thickness of not more than 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber (1) |
0 % |
31.12.2018 |
|
ex392010 25 |
20 |
Film of polyethylene, of a kind used for typewriter ribbon |
0 % |
31.12.2018 |
|
ex392010 28 |
91 |
Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: — is repetitive and equally spaced along the length of the film — is equally and visibly aligned when viewed from the back or front of the film |
0 % |
31.12.2018 |
|
ex392010 40 |
30 |
Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalized polymers of ethylene, consisting of: — a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, — covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110 μm |
0 % |
31.12.2017 |
|
ex392010 89 |
30 |
Ethylene vinyl acetate (EVA) film with: — a raised relief surface with embossed undulations, and — a thickness of more than 0,125 mm |
0 % |
31.12.2016 |
|
ex392010 89 |
40 |
Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm |
0 % |
31.12.2016 |
|
ex392020 21 |
30 |
Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm |
0 % |
31.12.2018 |
|
ex392020 21 |
40 |
Sheets of biaxially - oriented polypropylene film: — with the thickness of not more than 0,1 mm, — printed on both sides with specialised coatings to allow banknote security printing |
0 % |
31.12.2016 |
|
ex392020 29 ex850790 30 |
50 95 |
Sheet of polypropylene in the form of a roll: — with a thickness of not more than 30 μm, — of a width of not more than 210 mm, — conforming to ASTM D882, for use in the manufacture of separators for lithium-ion electric vehicle batteries (1) |
0 % |
31.12.2016 |
|
ex392020 29 ex392020 80 |
55 93 |
Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of: — a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, — covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110 μm |
0 % |
31.12.2017 |
|
ex392020 29 |
92 |
Mono-axial oriented film, of a total thickness of not more than 75 μm, consisting of two or three layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: — a tensile strength in the machine direction of 140 MPa or more but not more than 270 MPa and — a tensile strength in the transverse direction of 20 MPa or more but not more than 40 MPa as determined by test method ASTM D882/ISO 527-3 |
0 % |
31.12.2018 |
|
ex392020 29 |
93 |
Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having: — a thickness of 55 μm or more but not more than 97 μm, — a tensile modulus in the machine direction of 0,75 GPa or more but not more than 1,45 GPa, and — a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,55 GPa |
0 % |
31.12.2014 |
|
ex392020 29 |
94 |
Co-extruded trilayer film, — each layer containing a mixture of polypropylene and polyethylene, — containing not more than 3 % by weight of other polymers, — whether or not containing titanium dioxide in the core layer, — of an overall thickness of not more than 70 μm |
0 % |
31.12.2016 |
|
ex392020 80 |
92 |
Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not more than 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester |
0 % |
31.12.2018 |
|
ex392020 80 |
95 |
Polypropylene sheet, put up in rolls, with: — flame retardant level of UL 94 V-0 for material thicknesses of 0,25 mm or more and level UL 94 VTM-0 for material thicknesses of 0,05 mm or more but not more than 0,25 mm (as determined by Flammability Standard UL-94) — dielectric breakdown of 13,1 kV or more but not more than 60,0 kV(as determined by ASTM D149) — tensile yield in a machine direction of 30 MPa or more but not more than 33 MPa (as determined by ASTM D882) — tensile yield in a transverse direction of 22 MPa or more but not more than 25 MPa (as determined by ASTM D882) — density range of 0,988 g/cm3 or more but not more than 1,035 g/cm3 (as determined by ASTM D792) — moisture absorption of 0,01 % or more but not more than 0,06 % (as determined by ASTM D570) for use in the manufacture of insulators used in the electronics and electrical industries (1) |
0 % |
31.12.2017 |
|
ex392043 10 |
92 |
Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride) |
0 % |
31.12.2018 |
|
ex392043 10 ex392049 10 |
94 93 |
Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000 mm or more but not more than 1 450 mm, for use in the manufacture of goods of heading 9403 (1) |
0 % |
31.12.2018 |
|
ex392043 10 |
95 |
Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet |
0 % |
31.12.2018 |
|
ex392049 10 |
30 |
Film of a (polyvinyl)chloride-copolymer — containing by weight 45 % or more of fillers — on a support ◄ |
0 % |
31.12.2018 |
|
ex392051 00 |
20 |
Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm |
0 % |
31.12.2018 |
|
ex392051 00 |
30 |
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm |
0 % |
31.12.2018 |
|
ex392051 00 |
40 |
Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690) |
0 % |
31.12.2018 |
|
ex392059 90 |
10 |
Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1,0 mm or more but not more than 1,3 mm, put up in rolls |
0 % |
31.12.2016 |
|
ex392059 90 |
20 |
Reflecting laminated sheet, consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material |
0 % |
31.12.2014 |
|
ex392059 90 |
30 |
Non-self-adhesive reflecting film, consisting of several layers including: — a copolymer of acrylic resin — polyurethane — a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use — glass microspheres, and — a permanent liner of poly(ethyleneterephthalate) |
0 % |
31.12.2016 |
|
ex392062 19 |
02 |
Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black |
0 % |
31.12.2018 |
|
ex392062 19 |
08 |
Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either: — only dyed in the mass, or — dyed in the mass and metallised on one side |
0 % |
31.12.2018 |
|
ex392062 19 |
12 |
Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material |
0 % |
31.12.2018 |
|
ex392062 19 |
18 |
Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material |
0 % |
31.12.2018 |
|
ex392062 19 |
20 |
Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (1) |
0 % |
31.12.2018 |
|
ex392062 19 |
25 |
Film of poly(ethylene terephthalate) of a thickness of 186 μm or more but not more than 191 μm coated on one side with an acrylic layer in a matrix pattern |
0 % |
31.12.2014 |
|
ex392062 19 |
38 |
Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm |
0 % |
31.12.2018 |
|
ex392062 19 |
48 |
Sheets or rolls of poly(ethylene terephthalate): — coated on both sides with a layer of epoxy acrylic resin, — of a total thickness of 37 μm (± 3 μm) |
0 % |
31.12.2015 |
|
ex392062 19 |
52 |
Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257-99 method) |
0 % |
31.12.2018 |
|
ex392062 19 ex392069 00 |
73 40 |
Iridescent film of polyester and poly(methyl methacrylate) |
0 % |
31.12.2018 |
|
ex392062 19 |
76 |
Transparent poly(ethylene terephthalate) film: — coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm, — with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, — with a light transmission of more than 93 %, — with a haze value of not more than 1,3 %, — with a total thickness of 10 μm or more but not more than 350 μm, — with a width of 800 mm or more but not more than 1 600 mm |
0 % |
31.12.2018 |
|
ex392062 19 |
81 |
Poly(ethylene terephthalate) film: — of a thickness of not more than 20 μm, — coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm |
0 % |
31.12.2017 |
|
ex392069 00 |
20 |
Film of poly(ethylene naphthalene-2,6-dicarboxylate) |
0 % |
31.12.2018 |
|
ex392091 00 |
51 |
Poly(vinyl butyral) film containing by weight 25 % or more but not more than 28 % of tri-isobutyl phosphate as a plasticizer |
0 % |
31.12.2014 |
|
ex392091 00 |
52 |
Poly(vinyl butyral) film: — containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticizer, — with a thickness of 0,73 mm or more but not more than 1,50 mm |
0 % |
31.12.2014 |
|
ex392091 00 |
91 |
Poly(vinyl butyral) film having a graduated coloured band |
3 % |
31.12.2018 |
|
ex392091 00 |
92 |
Plasticised film of polyvinyl butyral, containing by weight: — either 14,5 % or more but not more than 17,5 % of dihexyl adipate, — or 14,5 % or more but not more than 28,5 % of dibutyl sebacate |
0 % |
31.12.2014 |
|
ex392091 00 |
93 |
Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: — a visible light transmission of 50 % or more, — coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), — a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm for use in the manufacture of heat-reflecting or decorative laminated glass (1) |
0 % |
31.12.2014 |
|
ex392091 00 |
95 |
Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2′-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser |
0 % |
31.12.2018 |
|
ex392092 00 |
30 |
Polyamide film: — of a thickness of not more than 20 μm, — coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm |
0 % |
31.12.2018 |
|
ex392099 28 |
35 |
Polyether imide sheets, in rolls, with — a thickness of 5 μm or more, but not more than 14 μm, — a width of 478 mm or more, but not more than 532 mm, — a tensile strength at break of 78 MPa or more (as determined by JIS C-2318 for a film thickness of 50 μm), — an elongation at break of 50 % or more (as determined by JIS C-2318 for a film thickness of 50 μm), — a glass transition point (Tg) of 226 °C, — a continuous service temperature of 180 °C (as determined by UL-746 B for a film thickness of 50 μm), — a flammability of VTM-0 (as determined by UL 94 for a film thickness of 25 μm) |
0 % |
31.12.2018 |
|
ex392099 28 |
40 |
Polymer film containing the following monomers: — poly (tetramethylene ether glycol), — bis (4-isocyanotocyclohexyl) methane, — 1,4-butanediol or 1,3-butanediol, — with a thickness of 0,25 mm or more but not more than 5,0 mm, — embossed with a regular pattern on one surface, — and covered with a release sheet |
0 % |
31.12.2018 |
|
ex392099 28 |
45 |
Transparent polyurethane film metallised on one side: — with a gloss of more than 90 degrees according to ASTM D2457 — covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer — covered on the other side with a protective poly(ethylene terephthalate) film — with a total thickness of more than 204 μm but not more than 244 μm |
0 % |
31.12.2018 |
|
ex392099 28 |
50 |
Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film |
0 % |
31.12.2016 |
|
ex392099 28 |
55 |
Thermoplastic polyurethane film extruded, with: — not self-adhesive, — an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10), — a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11), — a total thickness of 0,38 mm or more, but not more than 7,6 mm, — a width of 99 cm or more, but not more than 305 cm, of a kind used in the production of laminated safety glass |
0 % |
31.12.2017 |
|
ex392099 28 |
60 |
Silicone tape, plate or strip: — of a total thickness of 2 mm or more, but not more than 9 mm, — of a total width of 12 mm or more, but not more than 65 mm, for use in the manufacture of products of headings 8521 or 8528 (1) |
0 % |
31.12.2016 |
|
ex392099 28 |
70 |
Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: — microspheres with a coating of metal, whether or not alloyed with gold, — an adhesive layer, — with a protective layer of silicone or poly(ethylene terephthalate) on one side, — with a protective layer of poly(ethylene terephthalate) on the other side, and — with a width of 5 cm or more but not more than 100 cm — with a length of not more than 2 000 m |
0 % |
31.12.2016 |
|
ex392099 59 |
25 |
Poly(1-chlorotrifluoroethylene) film |
0 % |
31.12.2018 |
|
ex392099 59 |
50 |
Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not more than 0,14 mm, impermeable to water vapour |
0 % |
31.12.2018 |
|
ex392099 59 |
55 |
Ion-exchange membranes of fluorinated plastic material |
0 % |
31.12.2018 |
|
ex392099 59 |
60 |
Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 45 MPa and an elongation at break of 250 % or more but not more than 900 % |
0 % |
31.12.2018 |
|
ex392099 90 |
20 |
Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays |
0 % |
31.12.2018 |
|
ex392113 10 |
10 |
Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092 |
0 % |
31.12.2018 |
|
ex392113 10 |
20 |
Rolls of open-cell polyurethane foam: — with a thickness of 2,29 mm (± 0,25 mm), — surface-treated with a foraminous adhesion promoter, and — laminated to a polyester film and a layer of textile material |
0 % |
31.12.2017 |
|
ex392119 00 |
30 |
Blocks with cellular structure, containing by weight: — polyamide-6 or poly(epoxy anhydride) — 7 % or more but not more than 9 % of polytetrafluorethylene if present — 10 % or more but not more than 25 % of inorganic fillers |
0 % |
31.12.2018 |
|
ex392119 00 |
91 |
Microporous polypropylene film of a thickness of not more than 100 μm |
0 % |
31.12.2018 |
|
ex392119 00 |
93 |
Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment (1) |
0 % |
31.12.2018 |
|
ex392119 00 |
95 |
Film of polyethersulfone, of a thickness of not more than 200 μm |
0 % |
31.12.2018 |
|
ex392119 00 |
96 |
Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not more than 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not more than 40 μm |
0 % |
31.12.2018 |
|
ex392190 10 |
10 |
Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres |
0 % |
31.12.2018 |
|
ex392190 10 |
20 |
Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin |
0 % |
31.12.2018 |
|
ex392190 10 |
30 |
Multilayer film consisting of: — a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm, — a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm, — an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm, — and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm |
0 % |
31.12.2018 |
|
ex392190 55 |
20 |
Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring: — 469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or — 469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or — 546,1 mm (± 2 mm) × 622,3 mm (± 2 mm for use in the manufacture of printed circuit boards (1) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex392190 55 *ex701940 00 *ex701940 00 |
25 21 29 |
Prepreg sheets or rolls containing polyimide resin |
0 % |
31.12.2014 |
|
ex392190 55 |
30 |
Prepreg sheets or rolls containing brominated epoxy resin reinforced with glass fabric, having — a flow of not more than 3,6 mm (as determined by IPC-TM 650.2.3.17.2), and — a glass transition temperature (Tg) of more than 170 °C (as determined by IPC-TM 650.2.4.25) for use in the manufacture of printed circuit boards (1) |
0 % |
31.12.2014 |
|
ex392190 60 ex540771 00 ex590390 99 |
91 20 10 |
Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form |
0 % |
31.12.2018 |
|
ex392190 60 |
93 |
Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances (1) |
0 % |
31.12.2018 |
|
ex392190 90 ex850790 80 |
10 50 |
Roll of polymer-metal laminate comprising: — a layer of poly(ethylene terephthalate), — a layer of aluminium, — a layer of polypropylene, — with a width of not more than 275 mm, — a total thickness of not more than 165 μm, and — conforming to ASTM D1701-91 and ASTM D882-95A for use in the manufacture of lithium-ion electric vehicle batteries (1) |
0 % |
31.12.2016 |
|
ex392310 00 |
10 |
Photomask or wafer compacts: — consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties, — having non porous, abrasion resistant or impact resistant surface properties, — fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and — with or without a gasket seal, of a kind used in the photolithography or other semiconductor production to house photomasks or wafers |
0 % |
31.12.2016 |
|
ex392330 90 |
10 |
Polyethylene container, for compressed hydrogen: — with aluminium bosses at both ends, — wholly embedded in an overwrap of carbon fibres impregnated with epoxide resin, — of a diameter of 213 mm or more, but not more than 368 mm, — a length of 860 mm or more, but not more than 1 260 mm and — a capacity of 18 litres or more, but not more than 50 litres |
0 % |
31.12.2018 |
|
ex392690 92 |
20 |
Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material |
0 % |
31.12.2018 |
|
ex392690 97 |
10 |
Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm |
0 % |
31.12.2018 |
|
ex392690 97 |
15 |
Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems (1) |
0 % |
31.12.2018 |
|
ex392690 97 |
25 |
Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm |
0 % |
31.12.2018 |
|
ex392690 97 |
50 |
Knob of car radio front panel, made of Bisphenol A-based polycarbonate |
0 % |
31.12.2018 |
|
ex392690 97 |
55 |
Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not more than 1 200 μm and of a weight of 21 g/m2 or more but not more than 42 g/m2 |
0 % |
31.12.2018 |
|
ex392690 97 |
65 |
Die-cast decoration element made of polycarbonate resin, coated with — a silver-colour acrylic paint, and — a transparent scratch-resistant paint of a kind used in the manufacture of car radio front panels |
0 % |
31.12.2018 |
|
ex392690 97 |
80 |
Parts of car radio front panels — of acrylonitrile-butadiene-styrene with or without polycarbonate, — coated with a copper, a nickel and a chrome layers, — with a total thickness of coating of 5,54 μm or more but not more than 22,3 μm |
0 % |
31.12.2016 |
|
ex400700 00 |
10 |
Siliconated vulcanised rubber thread and cord |
0 % |
31.12.2018 |
|
ex401699 97 |
20 |
Soft rubber sealing stoppers for the manufacture of electrolytic capacitors (1) |
0 % |
31.12.2018 |
|
ex401699 97 |
30 |
Tyre moulding bladder |
0 % |
31.12.2016 |
|
ex410441 19 |
10 |
Buffalo leather, split, chrome tanned synthetic retanned ("crust"), dry |
0 % |
31.12.2017 |
|
4105 10 00 4105 30 90 |
Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114 |
0 % |
31.12.2018 |
|
|
4106 21 00 4106 22 90 |
Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114 |
0 % |
31.12.2018 |
|
|
4106 31 00 4106 32 00 4106 40 90 4106 92 00 |
Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114 |
0 % |
31.12.2018 |
|
|
ex440839 30 |
10 |
Okoumé veneer sheets of a thickness not exceeding 6 mm, unsanded, unplaned, of a kind used in plywood manufacture |
0 % |
31.12.2018 |
|
ex500400 10 |
10 |
Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk |
0 % |
31.12.2016 |
|
ex500500 10 ex500500 90 |
10 10 |
Yarn spun entirely from silk waste (noil), not put up for retail sale |
0 % |
31.12.2018 |
|
ex520531 00 |
10 |
Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 dtex per single yarn, for the manufacture of tampons (1) |
0 % |
31.12.2018 |
|
5208 11 10 |
Fabrics for the manufacture of bandages, dressings and medical gauzes |
5,2 % |
31.12.2018 |
|
|
ex540245 00 |
20 |
Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid |
0 % |
31.12.2018 |
|
ex540247 00 |
10 |
Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1 650 decitex or more but not more than 1 800 decitex, consisting of 110 filaments or more but not more than 120 filaments, each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not more than 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings (1) |
0 % |
31.12.2016 |
|
ex540247 00 |
20 |
Bicomponent monofilament yarn of not more than 30 dtex, consisting of: — a poly(ethylene terephthalate) core, and — an outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate), for use in the manufacture of filtration fabrics (1) |
0 % |
31.12.2015 |
|
ex540249 00 |
30 |
Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (1) |
0 % |
31.12.2018 |
|
ex540249 00 |
50 |
Non-textured filament yarn of poly(vinyl alcohol) |
0 % |
31.12.2018 |
|
ex540249 00 |
70 |
Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn (1) |
0 % |
31.12.2018 |
|
ex540419 00 |
20 |
Monofilament of poly(1,4-dioxanone) |
0 % |
31.12.2018 |
|
ex540419 00 |
30 |
Unsterilised monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures (1) |
0 % |
31.12.2014 |
|
ex540419 00 |
50 |
Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers (1) |
0 % |
31.12.2018 |
|
ex540490 90 |
20 |
Strip of polyimide |
0 % |
31.12.2018 |
|
ex540710 00 |
10 |
Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′–oxybis (phenyleneamine) |
0 % |
31.12.2017 |
|
ex550311 00 ex560130 00 |
10 40 |
Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine), of a length of not more than 7 mm |
0 % |
31.12.2018 |
|
ex550340 00 |
10 |
Hollow polypropylene staple fibres: — measuring 6 decitex or more but not more than 10 decitex, — of a strength of 3,5 cN/dtex or more — of a diameter of 30 μm or more for use in the manufacture of napkins and napkin liners for babies and other sanitary products (1) |
0 % |
31.12.2016 |
|
ex550390 00 ex550690 00 ex560130 00 |
20 10 10 |
Poly(vinyl alcohol) fibres, whether or not acetalized |
0 % |
31.12.2018 |
|
ex560311 10 ex560311 90 ex560312 10 ex560312 90 ex560391 10 ex560391 90 ex560392 10 ex560392 90 |
10 10 10 10 10 10 10 10 |
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: — of a thickness of 200 μm or more but not more than 280 μm and — of a weight of 20g/m2 or more but not more than 50g/m2 |
0 % |
31.12.2018 |
|
ex560311 10 ex560311 90 |
20 20 |
Non-wovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins (1) |
0 % |
31.12.2017 |
|
ex560312 90 ex560313 90 ex560314 90 ex560392 90 ex560393 90 ex560394 90 |
30 30 10 60 40 30 |
Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles |
0 % |
31.12.2018 |
|
ex560312 90 |
50 |
Non-woven: — weighing 30 g/m2 or more, but not more than 60 g/m2, — containing fibres of polypropylene or of polypropylene and polyethylene, — whether or not printed, with: — on one side, 65 % of the total surface area having circular bobbles of 4mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded, — and on other side a smooth untextured surface, for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles (1) |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex560312 90 *ex560313 90 |
60 60 |
Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method) |
0 % |
31.12.2018 |
|
ex560312 90 ex560313 90 ex560392 90 ex560393 90 |
70 70 40 10 |
Non-wovens of polypropylene, — with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene, — with a weight of not more than 150 g/m2, — in the piece or simply cut into squares or rectangles, and — not impregnated |
0 % |
31.12.2018 |
|
ex560313 10 ex560314 10 |
10 10 |
Electrically nonconductive nonwovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical nonconductive resin, weighing 147 g/m2 or more but not more than 265 g/m2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material |
0 % |
31.12.2018 |
|
ex560313 10 |
20 |
Non-woven of spunbonded polyethylene, with a coating, — of a weight of more than 80 g/m2 but not more than 105 g/m2 and — an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method) |
0 % |
31.12.2015 |
|
ex560314 90 |
40 |
Non-wovens, consisting of poly(ethylene terephthlate) spun bonded media: — of weight of 160 g/m2 or more but not more than 300 g/m2, — whether or not laminated on one side with a membrane or a membrane and aluminium of a kind used for the manufacture of industrial filters |
0 % |
31.12.2018 |
|
ex560392 90 ex560393 90 |
20 20 |
Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene |
0 % |
31.12.2018 |
|
ex560393 90 |
60 |
Nonwovens made of polyester fibres, — with a weight of 85 g/m2, — with a constant thickness of 95 μm (± 5 μm), — neither coated nor covered, — in 1 m wide rolls of 2 000m to 5 000 m length, suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters (1) |
0 % |
31.12.2018 |
|
ex560392 90 ex560394 90 |
70 40 |
Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene |
0 % |
31.12.2018 |
|
ex560392 90 ex560393 90 |
80 50 |
Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments: — a weight of 25 g/m2 or more but not more than 150 g/m2, — in the piece or simply cut into squares or rectangles, — not impregnated, — with cross-directional or machine-directional stretch properties for use in the manufacture of infant/child care products (1) |
0 % |
31.12.2016 |
|
ex560394 90 |
20 |
Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips (1) |
0 % |
31.12.2018 |
|
ex560750 90 |
10 |
Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures (1) |
0 % |
31.12.2014 |
|
ex580300 10 |
91 |
Gauze of cotton, of a width of less than 1 500 mm |
0 % |
31.12.2018 |
|
ex590310 90 ex590320 90 ex590390 99 |
10 10 20 |
Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres |
0 % |
31.12.2018 |
|
ex590699 90 |
10 |
Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine) |
0 % |
31.12.2018 |
|
ex590700 00 |
10 |
Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm |
0 % |
31.12.2016 |
|
ex591110 00 |
10 |
Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products (1) |
0 % |
31.12.2018 |
|
ex591190 90 ex842199 00 |
30 92 |
Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more |
0 % |
31.12.2018 |
|
ex591190 90 |
40 |
Multi-layered non-woven polyester polishing pads, impregnated with polyurethane |
0 % |
31.12.2014 |
|
ex681389 00 |
10 |
Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches (1) |
0 % |
31.12.2018 |
|
ex681410 00 |
10 |
Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres, for use in the manufacture of insulation products for high voltage applications (1) |
0 % |
31.12.2018 |
|
ex690390 90 |
20 |
Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials |
0 % |
31.12.2018 |
|
ex690919 00 |
15 |
Ceramic ring with rectangular transversal section having an external diameter of 19 mm or more (+ 0,00 mm/– 0,10 mm) but not more than 29 mm (+ 0,00 mm/– 0,20 mm), an internal diameter of 10 mm or more (+ 0,00 mm/– 0,20 mm) but not more than 19 mm (+ 0,00 mm/-0,30 mm), a thickness variable from 2 mm (± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or more, containing by weight: — 90 % (± 1,5 %) of aluminium oxide — 7 % (± 1 %) of titanium oxide |
0 % |
31.12.2017 |
|
ex690919 00 |
20 |
Silicon nitride (Si3N4) rollers or balls |
0 % |
31.12.2015 |
|
ex690919 00 |
25 |
Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide |
0 % |
31.12.2018 |
|
ex690919 00 |
30 |
Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end |
0 % |
31.12.2018 |
|
ex690919 00 ex691490 00 |
50 20 |
Ceramic articles made of continuous filaments of ceramic oxides, containing by weight: — 2 % or more of diboron trioxide, — 28 % or less of silicon dioxide and — 60 % or more of dialuminium trioxide |
0 % |
31.12.2018 |
|
ex690919 00 |
60 |
Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end |
0 % |
31.12.2018 |
|
ex690919 00 |
70 |
Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex690919 00 |
80 |
Ceramic heat sinks, containing by weight: — 66 % or more of silicon carbide, — 10 % or more of aluminium oxide for maintaining the operating temperature of transistors, diodes and integrated circuits in products of headings 8521 or 8528 (1) |
0 % |
31.12.2016 |
|
ex691490 00 |
30 |
Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm |
0 % |
31.12.2018 |
|
ex700510 30 |
10 |
Float glass: — of a thickness of 4,0 mm or more but not more than 4,2 mm, — with a light transmission of 91 % or more measured using a D-type light source, — coated on one surface with a fluorine doped tin dioxide reflective layer |
0 % |
31.12.2017 |
|
ex700600 90 |
70 |
Float glass: — with a thickness of 1,7 mm or more but not more than 1,9 mm, — with light transmission of 91 % or more, measured with a D-type light source, — coated on one side with fluorine-doped tin dioxide as a reflecting layer, — with worked edges |
0 % |
31.12.2016 |
|
ex700719 20 |
10 |
Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides, for use in the manufacture of products falling within heading 8528 (1) |
0 % |
31.12.2018 |
|
ex700729 00 |
10 |
Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides |
0 % |
31.12.2018 |
|
ex700910 00 |
10 |
Electro-cromic auto-dimming glass for motor vehicle mirrors: — whether or not equipped with plastic backing plate, — whether or not equipped with a heating element, — whether or not equipped with Blind Spot Module (BSM) display |
0 % |
31.12.2017 |
|
ex700991 00 |
10 |
Unframed glass mirrors with: — a length of 1 516 mm (± 1 mm); — a width of 553 mm (± 1 mm); — a thickness of 3 mm (± 0,1 mm); — the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm; — a lead content of not more than 90 mg/kg and — a corrosion resistance of 72 hours or more according to ISO 9227 salt spray test |
0 % |
31.12.2015 |
|
7011 20 00 |
Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for cathode ray tubes |
0 % |
31.12.2018 |
|
|
ex701400 00 |
10 |
Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware |
0 % |
31.12.2018 |
|
ex701912 00 ex701912 00 |
01 21 |
Rovings, measuring 2 600 tex or more but not more than 3 300 tex and of a loss on ignition of 4 % or more but not more than 8 % by weight (as determined by the ASTM D 2584-94 method) |
0 % |
31.12.2018 |
|
ex701912 00 ex701912 00 |
02 22 |
Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer of polyurethane whether or not mixed with other materials |
0 % |
31.12.2018 |
|
ex701912 00 ex701912 00 |
03 23 |
Rovings, measuring 392 tex or more but not more than 2 884 tex, coated with a layer of an acrylic copolymer |
0 % |
31.12.2018 |
|
ex701912 00 ex701912 00 |
05 25 |
Rovings ranging from 1 980 to 2 033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm) |
0 % |
31.12.2017 |
|
ex701919 10 |
10 |
Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers |
0 % |
31.12.2018 |
|
ex701919 10 |
15 |
S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm / + 1,5 μm) |
0 % |
31.12.2017 |
|
ex701919 10 |
20 |
Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate |
0 % |
31.12.2015 |
|
ex701919 10 |
25 |
Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate |
0 % |
31.12.2015 |
|
ex701919 10 |
30 |
Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate |
0 % |
31.12.2014 |
|
ex701919 10 |
50 |
Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 percent by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated |
0 % |
31.12.2016 |
|
ex701919 10 |
55 |
Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of: — 9 % or more but not more than 16 % of magnesium oxide, — 19 % or more but not more than 25 % of aluminium oxide, — 0 % or more but not more than 2 % of boron oxide, — without calcium oxide, coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene |
0 % |
31.12.2014 |
|
ex701919 10 ex701990 00 |
60 30 |
High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR) |
0 % |
31.12.2018 |
|
ex701919 10 ex701990 00 |
70 20 |
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR) |
0 % |
31.12.2018 |
|
ex701919 10 ex701990 00 |
80 40 |
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene |
0 % |
31.12.2018 |
|
ex701939 00 |
50 |
Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts (1) |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex701940 00 *ex701940 00 |
11 19 |
Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of: — 10ppm per°C or more but not more than 12ppm per°C in the length and width, and — 20ppm per°C or more but not more than 30ppm per°C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650) |
0 % |
31.12.2018 |
|
ex701990 00 |
10 |
Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex702000 10 *ex761699 90 |
10 77 |
Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body |
0 % |
31.12.2016 |
|
ex720110 11 |
10 |
Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm |
0 % |
31.12.2016 |
|
ex720110 30 |
10 |
Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon |
0 % |
31.12.2016 |
|
7202 50 00 |
Ferro-silico-chromium |
0 % |
31.12.2018 |
|
|
ex720299 80 |
10 |
Ferro-dysprosium, containing by weight: — 78 % or more of dysprosium, and — 18 % or more but not more than 22 % of iron |
0 % |
31.12.2015 |
|
ex731814 99 ex731814 99 |
20 29 |
Rock bolt: — being a self-tapping screw, — with a length of more than 300 mm, of a kind used for support of mines |
0 % |
31.12.2016 |
|
ex732090 10 |
91 |
Flat spiral spring of tempered steel, with: — a thickness of 2,67 mm or more, but not more than 4,11 mm, — a width of 12,57 mm or more, but not more than 16,01 mm, — a torque of 18,05 Nm or more, but not more than 73,5 Nm — an angle between the free position and the nominal position in exercise of 76 ° or more, but not more than 218 ° for use in the manufacture of tensioners for power transmission belts, for internal combustion engines (1) |
0 % |
31.12.2018 |
|
ex732599 10 |
20 |
Anchor head of hot dipped galvanized ductile cast iron of the kind used in the production of earth anchors |
0 % |
31.12.2014 |
|
ex732620 00 |
20 |
Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,017 mm or more but not more than 0,070 mm, compacted by sintering and rolling |
0 % |
31.12.2016 |
|
ex741011 00 ex850790 80 ex854590 90 |
10 60 30 |
Roll of laminate foil of graphite and copper, with: — a width of 610 mm or more but not more than 620 mm, and — a diameter of 690 mm or more but not more than 710 mm, for use in the manufacture of lithium-ion electric vehicle batteries (1) |
0 % |
31.12.2016 |
|
ex741021 00 |
10 |
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil |
0 % |
31.12.2018 |
|
ex741021 00 |
30 |
Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil |
0 % |
31.12.2018 |
|
ex741021 00 |
40 |
Sheet or plates: — consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or — consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15 mm |
0 % |
31.12.2018 |
|
ex741021 00 |
50 |
Plates: — consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, — covered on one or both sides with copper foilwith a thickness of not more than 0,15mm and — with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10GHz, as measured according to IPC-TM-650 |
0 % |
31.12.2018 |
|
ex741021 00 |
60 |
Plates, rolls and sheets of synthetic or artificial resin: — with a maximum thickness of not more than 25 μm, — coated on both sides with a copper film with a maximum thickness of 0,15mm, — with a minimum capacitance of 1,09pF/mm2, for use in the manufacture of circuit boards (1) |
0 % |
31.12.2018 |
|
ex741021 00 |
70 |
Plates, rolls or sheets: — with at least one layer of woven glass fibre, impregnated with a fire-retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 170 °C (according to IPC-TM-650, method 2.4.25), — coated on one or both sides with a copper film with a thickness of not more than 0,15 mm, for use in the manufacture of circuit boards (1) |
0 % |
31.12.2018 |
|
ex741999 90 ex761699 90 |
91 60 |
Disc (target) with deposition material, consisting of molybdenum silicide: — containing 1 mg/kg or less of sodium and — mounted on a copper or aluminium support |
0 % |
31.12.2018 |
|
7601 20 20 |
Slabs and billets of unwrought aluminium alloys |
4 % |
31.12.2018 |
|
|
ex760120 20 |
10 |
Slabs and billets of aluminium alloy containing lithium |
0 % |
31.12.2017 |
|
ex760421 00 ex760429 90 |
10 30 |
Profiles made of aluminium alloy conforming to EN standard AW-6063 T5 — anodized — whether or not lacquered — with a wall thickness of 0,5 mm (± 1,2 %) or more but not more than 0,8 mm (± 1,2 %) for use in the manufacture of goods of heading 8302 (1) |
0 % |
31.12.2018 |
|
ex760429 10 ex760612 99 |
10 20 |
Sheets and bars of aluminium-lithium alloys |
0 % |
31.12.2015 |
|
ex760519 00 |
10 |
Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm |
0 % |
31.12.2018 |
|
ex760612 92 ex760711 90 |
20 20 |
Aluminium and magnesium alloy strip: — in rolls, — of a thickness of 0,14 mm or more but not more than 0,40 mm, — a width of 12,5 mm or more but not more than 359 mm, — a tensile strength of 285 N/mm2 or more, and — an elongation at break of 1 % or more, and containing by weight: — 93,3 % or more of aluminium, — 2,2 % or more but not more than 5 % of magnesium, and — not more than 1,8 % of other elements |
0 % |
31.12.2017 |
|
ex760711 90 |
10 |
Plain aluminium foil with the following parameters: — an aluminium content of 99,98 % or more — a thickness of 0,070 mm or more but not more than 0,125 mm — with a cubic texture of a kind used for high voltage etching (1) |
0 % |
31.12.2016 |
|
ex760711 90 |
40 |
Aluminium foil in rolls: — having a purity of 99,99 % by weight, — of a thickness of 0,021 mm or more but not more than 0,2 mm, — with a width of 500 mm, — with a surface oxide layer by 3 to 4 nm thick, — and with a cubic texture of more than 95 % |
0 % |
31.12.2016 |
|
ex760719 90 ex850790 80 |
10 80 |
Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: — a width of 595 mm or more but not more than 605 mm, and — a diameter of 690 mm or more but not more than 710 mm, for use in the manufacture of cathodes for lithium-ion electric vehicle batteries (1) |
0 % |
31.12.2016 |
|
ex760720 90 |
10 |
Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries (1) |
0 % |
31.12.2017 |
|
ex760720 90 |
20 |
Lubricating entry sheet of a total thickness of not more than 350 μm, comprising of: — a layer of aluminium foil of a thickness of 70 μm or more but not more than 150 μm, — a water soluble lubricant of a thickness of 20 μm or more but not more than 200 μm and solid at room temperature |
0 % |
31.12.2015 |
|
ex760820 89 |
30 |
Seamless aluminium alloyed extruded tubes with: — an outer diameter of 60 mm or more but not more than 420 mm, and — a wall thickness of 10 mm or more but not more than 80 mm |
0 % |
31.12.2018 |
|
ex761300 00 |
20 |
Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg |
0 % |
31.12.2018 |
|
ex761699 90 |
15 |
Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts |
0 % |
31.12.2018 |
|
ex761699 90 ex848280 00 ex880330 00 |
70 10 40 |
Connecting components for use in the production of helicopter tail rotor shafts (1) |
0 % |
31.12.2016 |
|
ex761699 90 |
75 |
Parts in the shape of a rectangular frame: — of painted aluminium, — with a length of 1 011 mm or more but not more than 1 500 mm, — with a width of 622 mm or more but not more than 900 mm, — with a thickness of 0,6 mm (± 0,1 mm), of a kind used in the manufacture of TV sets |
0 % |
31.12.2017 |
|
ex810210 00 |
10 |
Molybdenum powder with: — a purity by weight of 99 % or more and — a particle size of 1,0 μm or more, but not more than 5,0 μm |
0 % |
31.12.2017 |
|
8104 11 00 |
Unwrought magnesium, containing at least 99,8 % by weight of magnesium |
0 % |
31.12.2018 |
|
|
ex810430 00 |
30 |
Magnesium powder: — of purity by weight of 99,5 % or more, — with a particle size of 0,2 mm or more but not more than 0,8 mm |
0 % |
31.12.2015 |
|
ex810490 00 |
10 |
Ground and polished magnesium sheets, of dimensions not more than 1 500 mm × 2 000 mm, coated on one side with an epoxy resin insensitive to light |
0 % |
31.12.2018 |
|
ex810590 00 |
10 |
Bars or wires made of cobalt alloy containing, by weight: — 35 % (± 2 %) cobalt, — 25 % (± 1 %) nickel, — 19 % (± 1 %) chromium and — 7 % (± 2 %) iron conforming to the material specifications AMS 5842, of a kind used in the aerospace industry |
0 % |
31.12.2017 |
|
ex810820 00 |
10 |
Titanium sponge |
0 % |
31.12.2018 |
|
ex810820 00 |
30 |
Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm |
0 % |
31.12.2018 |
|
ex810830 00 |
10 |
Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium |
0 % |
31.12.2018 |
|
ex810890 30 |
10 |
Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040 |
0 % |
31.12.2014 |
|
ex810890 30 |
20 |
Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 00 (1) |
0 % |
31.12.2017 |
|
ex810890 30 |
30 |
Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928 and 4967 |
0 % |
31.12.2015 |
|
ex810890 30 |
40 |
Wire of an titanium alloy containing by weight: — 22 % (± 3 %) of vanadium and — 4 % (± 0,5 %) of aluminium |
0 % |
31.12.2016 |
|
ex810890 50 |
10 |
Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1 000 mm or more but not more than 1 254 mm, for the manufacture of goods of subheading 8714 10 00 (1) |
0 % |
31.12.2018 |
|
ex810890 50 |
30 |
Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of: — exhaust systems for internal combustion engines or — tubes and pipes of subheading 8108 90 60 (1) |
0 % |
31.12.2017 |
|
ex810890 50 |
50 |
Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium |
0 % |
31.12.2017 |
|
ex810890 50 |
60 |
Plates, sheets, strips and foils of an alloy of titanium, aluminium, silicon and niobium, containing by weight: — 0,4 % or more but not more than 0,6 % of aluminium, — 0,35 % or more but not more than 0,55 % of silicon and — 0,1 % or more but not more than 0,3 % of niobium |
0 % |
31.12.2018 |
|
ex810890 50 |
70 |
Strip of an alloy of titanium, containing by weight: — 15 % (± 1 %) of vanadium — 3 % (± 0,5 %) of chromium — 3 % (± 0,5 %) of tin and — 3 % (± 0,5 %) of aluminium |
0 % |
31.12.2016 |
|
ex810890 50 |
75 |
Plates, sheets, strips and foil of titanium alloy, containing by weight: — 0,3 % or more but not more than 0,7 % of aluminium and — 0,25 % or more but not more than 0,6 % of silicon |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
ex810890 90 ex900390 00 |
20 10 |
Parts of spectacle frames and mountings, including bolts of the kind used for spectacle frames and mountings, of an alloy of titanium |
0 % |
31.12.2016 |
|
ex810920 00 |
10 |
Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry (1) |
0 % |
31.12.2018 |
|
ex811010 00 |
10 |
Antimony in the form of ingots |
0 % |
31.12.2018 |
|
ex811299 30 |
10 |
Alloy of niobium (columbium) and titanium, in the form of bars and rods |
0 % |
31.12.2018 |
|
ex811300 20 |
10 |
Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide |
0 % |
31.12.2016 |
|
ex811300 90 |
10 |
Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits |
0 % |
31.12.2017 |
|
ex820730 10 |
10 |
Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles (1) |
0 % |
31.12.2017 |
|
ex830160 00 ex841391 00 ex841990 85 ex843890 00 ex846890 00 ex847690 00 ex847990 80 ex848190 00 ex850300 99 ex851590 00 ex853190 85 ex853690 85 ex854390 00 ex870891 99 ex870899 97 ex903190 85 |
10 20 20 10 10 10 87 20 45 20 20 96 50 10 30 30 |
Keypads, wholly of either silicone or polycarbonate, including printed keys with electrical contacting elements |
0 % |
31.12.2015 |
|
▼M1 ————— |
||||
|
*ex830990 90 |
10 |
Aluminium can ends: — with a diameter of 99,00 mm or more but not more than 136,5 mm (± 1mm), — whether or not with a ‘ring-pull’ aperture |
0 % |
31.12.2018 |
|
ex840130 00 |
20 |
Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors (1) |
0 % |
31.12.2018 |
|
ex840590 00 ex870821 10 ex870821 90 |
10 10 10 |
Metal casing for automobile safety belt pre-tension gas generators |
0 % |
31.12.2014 |
|
ex840733 20 ex840733 80 ex840790 80 ex840790 90 |
10 10 10 10 |
Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of: — self-propelled lawn mowers with a seat of subheading 8433 11 51, and hand-operated lawn mowers of heading 8433 11 90, — tractors of subheading 8701 90 11, whose main function is that of a lawn mower, — four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10 or — snowploughs and snow blowers of subheading 8430 20 (1) |
0 % |
31.12.2017 |
|
ex840790 10 |
10 |
Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of lawnmowers of subheading 8433 11, mowers with motor of subheading 8433 20 10, rotovators of subheading 8432 29 50, garden shredders of subheading 8436 80 90 or scarifiers of subheading 8432 29 10 (1) |
0 % |
31.12.2016 |
|
ex840790 90 |
20 |
Compact Liquid Petroleum Gas (LPG) Engine System, with: — 6 cylinders, — an output of 75 kW or more, but not more than 80 kW, — inlet and exhaust valves modified to operate continuously in heavy duty applications, for use in the manufacture of vehicles of heading 8427 (1) |
0 % |
31.12.2015 |
|
ex840890 41 |
20 |
Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1) |
0 % |
31.12.2018 |
|
ex840890 43 |
20 |
Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1) |
0 % |
31.12.2018 |
|
ex840890 43 ex840890 45 ex840890 47 |
30 20 30 |
4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having: — a capacity of not more than 3 850 cm3, and — a rated output of 15 kW or more but not more than 55 kW, for use in the manufacture of vehicles of heading 8427 (1) |
0 % |
31.12.2017 |
|
ex840890 47 |
40 |
4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having: — a capacity of not more than 3 850 cm3, — a rated output of 55 kW or more but not more than 85 kW, for use in the manufacture of vehicles of heading 8427 (1) |
0 % |
31.12.2018 |
|
ex840991 00 ex840999 00 |
10 20 |
Exhaust manifold complying with standard DIN EN 13835, whether or not with turbine housing, with four inlet ports, for use in the manufacture of exhaust manifold that is turned, milled, drilled and/or processed by other means (1) |
0 % |
31.12.2016 |
|
ex840999 00 ex847990 80 |
10 85 |
Injectors with solenoid valve for optimised atomisation in the engine combustion chamber |
0 % |
31.12.2016 |
|
ex841199 00 |
30 |
Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: — of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686, — with a heat-resistance of not more than 1 100 °C; — with a diameter of 30 mm or more, but not more than 80 mm; — with a height of 30 mm or more, but not more than 50 mm |
0 % |
31.12.2017 |
|
ex841199 00 |
40 |
Spiral-shaped gas turbine turbocharger component: — of a stainless alloy, — with a heat-resistance of not more than 1 050 °C, — with a diameter of 100 mm or more, but not more than 200 mm, — with a height of 100 mm or more, but not more than 150 mm, — whether or not with an engine exhaust manifold |
0 % |
31.12.2018 |
|
ex841199 00 |
50 |
Actuator for a single-stage turbocharger: — with a built-in conducting horn and connecting sleeve, — of a stainless steel alloy, — with conducting horns having an operating distance of 20 mm, — with a length of not more than 350 mm, — with a diameter of not more than 75 mm, — with a height of not more than 50 mm |
0 % |
31.12.2018 |
|
ex841370 35 |
20 |
Single phase centrifugal pump: — discharging at least 400 cm3 fluid per minute, — with a noise level limited to 6 dBA, — with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, and — working at ambient temperatures down to -10 °C |
0 % |
31.12.2015 |
|
ex841430 81 |
50 |
Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment |
0 % |
31.12.2014 |
|
ex841430 81 ex841480 73 |
60 30 |
Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants: — driven by ‘on-off' single phase alternate current’ (AC) or ‘brushless direct current’ (BLDC) variable speed motors — with a nominal power rating of not more than 1,5 kW of a kind used in the production of household heat pump laundry tumble dryers |
0 % |
31.12.2018 |
|
ex841430 89 |
20 |
Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW |
0 % |
31.12.2018 |
|
ex841459 20 |
30 |
Axial fan: — with an electric motor, — of an output of not more than 125 W for use in the manufacture of computers (1) |
0 % |
31.12.2018 |
|
ex841459 20 |
40 |
Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8521 or 8528 (1) |
0 % |
31.12.2015 |
|
ex841459 80 ex841490 00 |
40 60 |
Cross-flow fan with: — a height of 575 mm (± 1,0 mm) or more, but not more than 850 mm (± 1,0 mm), — a diameter of 95mm (± 0,6 mm) or 102 mm (± 0,6 mm), — an anti-static, anti-bacterial and heat-resistant, 30 % glass fibre reinforced plastic raw material that has a minimum temperature resistance of 70 °C (± 5 °C), for use in the manufacture of indoor units of split-type air conditioning machines (1) |
0 % |
31.12.2016 |
|
ex841490 00 |
20 |
Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles (1) |
0 % |
31.12.2014 |
|
ex841490 00 |
30 |
Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles (1) |
0 % |
31.12.2018 |
|
ex841490 00 |
40 |
Drive part, for compressors of air conditioning machines of motor vehicles (1) |
0 % |
31.12.2018 |
|
ex841590 00 |
20 |
Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles (1) |
0 % |
31.12.2016 |
|
ex841899 10 |
50 |
Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration equipment |
0 % |
31.12.2014 |
|
ex841899 10 |
60 |
Condenser composed of two concentric copper tubes of the kind used in refrigeration equipment |
0 % |
31.12.2014 |
|
ex842199 00 |
91 |
Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder |
0 % |
31.12.2018 |
|
ex842199 00 |
93 |
Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not more than 3 700 mm and a diameter of not more than 500 mm |
0 % |
31.12.2018 |
|
ex842230 00 ex847989 97 |
10 30 |
Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges (1) |
0 % |
31.12.2018 |
|
ex842490 00 |
30 |
Containers of poly(ethylene terephthalate), with a content of 50 ml or more but not more than 600 ml, equipped with a nozzle, of a kind used as a part of mechanical appliances for spraying liquids |
0 % |
31.12.2018 |
|
ex843120 00 |
30 |
Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427 (1) |
0 % |
31.12.2017 |
|
ex843120 00 |
40 |
Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427 (1) |
0 % |
31.12.2018 |
|
ex843999 00 |
10 |
Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3 000 mm or more and an external diameter of 550 mm or more |
0 % |
31.12.2018 |
|
ex846799 00 ex853650 11 |
10 35 |
Mechanical switches for connecting electrical circuits, with: — a voltage of 14,4 V or more but not more than 42 V, — an amperage of 10 A or more but not more than 42 A, for use in the manufacture of machines falling within heading 8467 (1) |
0 % |
31.12.2014 |
|
ex847529 00 ex851410 80 |
10 10 |
Glass Filament Melter with heater basket/bushing assembly: — electrically heated, — with opening — with a multiplicity of tips (holes) of platinum/rhodium alloy — used to melt glass batches and condition molten glass — for drawing into continuous fibres |
0 % |
31.12.2018 |
|
ex847780 99 |
10 |
Machines for casting or for surface modification of plastic membranes of heading 3921 |
0 % |
31.12.2018 |
|
ex847989 97 |
40 |
Isobaric pressure exchanger with a flow rate of not more than 50 m3/h, whether or not with a booster pump |
0 % |
31.12.2014 |
|
ex847989 97 ex847990 80 |
50 80 |
Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line (1) |
0 % |
31.12.2015 |
|
ex848130 91 |
91 |
Steel check (non-return) valves with: — an opening pressure of not more than 800 kPa — an external diameter not more than 37 mm |
0 % |
31.12.2014 |
|
ex848180 59 |
10 |
Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines |
0 % |
31.12.2018 |
|
ex848180 69 |
60 |
Four-way reversing valve for refrigerants, consisting of: — a solenoid pilot valve — a brass valve body including valve slider and copper connections with a working pressure up to 4,5 MPa |
0 % |
31.12.2017 |
|
ex848180 79 |
20 |
Solenoid valve device that can withstand a pressure of 875 bar |
0 % |
31.12.2018 |
|
ex848180 99 |
50 |
Service valve, consisting a combination of a two way valve on the liquid line and a three way valve on the gas line with: — a minimum enclosing pressure of 30 kgf/cm2, — a minimum withstanding pressure of 45 kgf/cm2, for use in the manufacture of outdoor air conditioning units (1) |
0 % |
31.12.2016 |
|
ex848180 99 |
60 |
our way valve, consisting of: — a core plunger, — a sealing plunger, — a 220 V-240 V AC 50/60 Hz solenoid coil, — a working pressure up to 4,3 MPa, — a housing for directing the flow of the refrigerant, for use in the manufacture of outdoor air conditioning units (1) |
0 % |
31.12.2016 |
|
ex848330 38 |
30 |
Cylindrical bearing housing: — of precision-cast grey cast iron complying with standard DIN EN 1561, — with oil chambers, — without bearings, — with a diameter of 60 mm or more, but not more than 180 mm, — with a height of 60 mm or more, but not more than 120 mm, — whether or not with water chambers and connectors |
0 % |
31.12.2017 |
|
ex848340 29 |
50 |
Gear set of cycloid gear type with: — a rated torque of 50 Nm or more but not more than 7 000 Nm, — standard ratios of 1:50 or more but not more than 1:270, — lost motion of not more than one arc minute, — an efficiency of more than 80 %, of a kind used in robot arms |
0 % |
31.12.2016 |
|
ex848340 29 |
60 |
Epicyclic gearing, of a kind used in driving hand-held power tools with: — a rated torque of 25 Nm or more, but not more than 70 Nm, — standard gear ratios of 1:12.7 or more, but not more than 1:64.3 |
0 % |
31.12.2018 |
|
ex848340 51 |
20 |
Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1) |
0 % |
31.12.2018 |
|
ex848340 59 |
20 |
Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1) |
0 % |
31.12.2018 |
|
ex848340 90 |
80 |
Transmission gearbox, with: — not more than 3 gears, — an automatic deceleration system and — a power reversal system, for use in the manufacture of goods of heading 8427 (1) |
0 % |
31.12.2015 |
|
ex850110 99 |
54 |
DC motor, brushless, with an external diameter of not more than 25,4 mm, a rated speed of 2 260 (± 15 %) rpm or 5 420 (± 15 %) rpm, a supply voltage of 1,5 V or 3 V |
0 % |
31.12.2018 |
|
ex850110 99 |
60 |
DC motor: — with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded — with a power supply voltage of 100 V or more but not more than 240 V for use in the manufacture of electric fryers (1) |
0 % |
31.12.2017 |
|
ex850110 99 |
70 |
DC stepping motor, with — an angle of step of 7,5° (± 0,5°) — a two-phase winding, — a rated voltage of 9 V or more, but not more than 16,0 V — of a specified temperature range covering at least – 40 °C to + 105 °C — with or without connecting pinion — with or without motor drive connector |
0 % |
31.12.2018 |
|
ex850110 99 |
79 |
DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least – 20 °C to + 70 °C |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex850110 99 |
80 |
DC stepping motor, with: — an angle of step of 7,5° (± 0,5°), — a pull-out torque at 25 °C of 25 mNm or more, — a pull-out pulse rate of 1 500 pps or more, — a two-phase winding, and — a rated voltage of 10,5 V or more, but not more than 16,0 V |
0 % |
31.12.2018 |
|
ex850110 99 |
81 |
DC stepping motor, with an angle of step of 18 ° or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 mm × 68 mm, a two phase winding and an output of not more than 5 W |
0 % |
31.12.2018 |
|
ex850110 99 |
82 |
DC motor, brushless, with an external diameter of not more than 29 mm, a rated speed of 1 500 (± 15 %) rpm or 6 800 (± 15 %) rpm, a supply voltage of 2 V or 8 V |
0 % |
31.12.2014 |
|
ex850131 00 |
30 |
DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1 550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor) (1) |
0 % |
31.12.2016 |
|
ex850131 00 |
40 |
Permanently excited DC motor with — a multiple-phase winding, — an external diameter of 30 mm or more but not more than 80 mm, — a rated speed of not more than 15 000 rpm, — an output of 45 W or more but not more than 300 W and — a supply voltage of 9 V or more but not more than 25 V |
0 % |
31.12.2014 |
|
ex850131 00 |
45 |
DC motors, brushless, with: — an external diameter of 90 mm or more, but not more than 110 mm, — a rated speed of not more than 3 680 rpm, — an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 °C, — a supply voltage of 12 V, — a torque of not more than 5,67 Nm, — a rotor position sensor, — an electronic star-point relay, and — for use with an electric power steering control module |
0 % |
31.12.2018 |
|
ex850131 00 |
55 |
DC motor with commutator, with — an external diameter of 27,5 mm or more, but not more than 45 mm, — a rated speed of 11 000 rpm or more, but not more than 23 200 rpm, — a rated supply voltage of 3.6 V or more, but not more than 230 V, — an output power of not more than 529 W, — a free load current of not more than 3.1 A, — a maximum efficiency of 54 % or more, for driving hand-held power tools |
0 % |
31.12.2018 |
|
ex850131 00 |
60 |
Brushless DC motor that can revolve counter clockwise (CCW), with: — an input voltage of 264 V or more, but not more than 391 V, — an external diameter of 81 mm (± 2,5 mm) or more, but not more than 150 mm (± 0,8 mm), — an output power of not more than 125 W, — E or B class winding insulation, for use in the manufacture of indoor or outdoor units of split-type air conditioning machines (1) |
0 % |
31.12.2016 |
|
ex850131 00 |
65 |
Fuel cell module containing at least polymer electrolyte membrane fuel cells in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems (1) |
0 % |
31.12.2018 |
|
ex850131 00 |
70 |
DC motors, brushless, with: — an external diameter of 80 mm or more, but not more than 100 mm, — a supply voltage of 12 V, — an output at 20 °C of 300 W or more, but not more than 550 W, — a torque 20 °C of 2,90 Nm or more, but not more than 5,30 Nm, — a rated speed at 20 °C of 600 rpm or more, but not more than 1 200 rpm, — equipped with the rotor angle position sensor of resolver type or Hall effect type, of the kind used in power steering systems for cars |
0 % |
31.12.2017 |
|
ex850133 00 ex850140 80 ex850153 50 |
30 50 10 |
Electric drive for motor vehicles, with an output of not more than 315 kW, with: — an AC or DC motor whether or not with transmission, — power electronics |
0 % |
31.12.2016 |
|
ex850151 00 ex850152 20 |
30 50 |
AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 rpm, with: — an output of 340 W or more but not more than 7,4 kW, — a flange of dimensions of not more than 180 mm × 180 mm, and — a length from flange to extreme end of resolver of not more than 271 mm |
0 % |
31.12.2016 |
|
ex850162 00 |
30 |
Fuel cell system — consisting of at least phosphoric acid fuel cells, — in a housing with integrated water management and gas treatment, — for permanent, stationary energy supply |
0 % |
31.12.2017 |
|
ex850300 91 ex850300 99 |
31 32 |
Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring |
0 % |
31.12.2018 |
|
ex850300 99 |
31 |
Stamped collector of an electric motor, having an external diameter of not more than 16 mm |
0 % |
31.12.2018 |
|
ex850300 99 |
33 |
Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm |
0 % |
31.12.2016 |
|
ex850300 99 |
34 |
Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm |
0 % |
31.12.2016 |
|
ex850300 99 |
35 |
Transmitter resolver for brushless motors of electrical power steering |
0 % |
31.12.2014 |
|
ex850300 99 |
40 |
Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 8501 |
0 % |
31.12.2017 |
|
ex850300 99 |
50 |
Stator for brushless motor, with: — an internal diameter of 206,6 mm (± 0,5) — an external diameter of 265,0 mm (± 0,2) and — a width of 41,00 mm (± 0,3) of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums |
0 % |
31.12.2018 |
|
ex850431 80 |
20 |
Transformer for use in the manufacture of inverters in LCD modules (1) |
0 % |
31.12.2017 |
|
ex850431 80 |
30 |
Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters (1) |
0 % |
31.12.2018 |
|
ex850431 80 |
40 |
Electrical transformers: — with a capacity of 1 kVA or less — without plugs or cables, for internal use in the manufacture of set top boxes and TVs (1) |
0 % |
31.12.2017 |
|
ex850440 82 |
40 |
Printed circuit board equipped with a bridge rectifier circuit and other active and passive components: — with two output connectors — with two input connectors which are available and useable in parallel — able to switch between bright and dimmed operation mode — with an input voltage of 40 V (+ 25 % – 15 %) or 42 V (+ 25 % – 15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or — with an input voltage of 230 V (+ 20 % – 15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or — with an input voltage of 120 V (15 % – 35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode — with an input current reaching 80 % of its nominal value within 20 ms — with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions — with an maximum inrush current overshoot of not more than 250 % of the input current — with a period of the inrush current overshoot of not more than 100 ms — with an input current undershoot of not less than 50 % of the input current — with a period of the inrush current undershoot of not more than 20 ms — with a presettable output current — with an output current reaching 90 % of its nominal pre-set value within 50 ms — with an output current reaching zero within 30 ms after removal of the input voltage — with an defined failure status in case of no-load or too-high load (end-of-life function) |
0 % |
31.12.2017 |
|
ex850440 82 |
50 |
Rectifier in a housing with — a rated power of not more than 250 W — an input voltage of 90 V or more, but not more than 305 V — a certified input frequency of 47 Hz or more, but not more than 440 Hz — a constant current output of 350 mA or more, but not more than 15 A — an inrush current of not more than 10 A — an operating temperature range of – 40 °C or more, but not more than + 85 °C, — suitable for driving of LED-illuminants |
0 % |
31.12.2017 |
|
ex850440 90 |
20 |
Direct current to direct current converter |
0 % |
31.12.2018 |
|
ex850440 90 |
30 |
Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 8516 50 00 (1) |
0 % |
31.12.2018 |
|
ex850440 90 |
40 |
Semiconductor power modules comprising: — power transistors, — integrated circuits, — whether or not containing diodes and with or without thermistors, — an operating voltage of not more than 600 V, — not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, and — a rms (root mean square) current rating of not more than 15,7 A |
0 % |
31.12.2018 |
|
ex850440 90 |
50 |
Drive unit for industrial robot with: — one or six 3-phase motor outputs with maximum 3 × 32 A, — a main power input of 220 V AC or more, but not more than 480 V AC, or 280 V DC or more, but not more than 800 V DC — a logic power input of 24 V DC, — an EtherCat communication interface, — and a dimension of 150 × 140 × 120 mm or more, but not more than 335 × 430 × 179 mm |
0 % |
31.12.2018 |
|
ex850440 90 |
60 |
Transfer moulded semiconductor power module comprising: — power transistors, — integrated circuits, — whether or not containing diodes and with or without thermistors, — a circuit configuration, — either containing a direct drive stage with an operating voltage of more than 600 V, — or containing a direct drive stage with an operating voltage of not more than 600 V and a rms current of more than 15,7 A, — or including one or more power factor correction modules |
0 % |
31.12.2018 |
|
ex850440 90 |
70 |
Module for converting alternating current into direct current and direct current into direct current with — a rated power of not more than 100 W — an input voltage of 80 V or more, but not more than 305 V — an certified input frequency of 47 Hz or more, but not more than 440 Hz — one or more constant voltage output(s) — an operating temperature range of – 40 °C or more, but not more than + 85 °C, — pins for mounting to a printed circuit |
0 % |
31.12.2018 |
|
ex850450 95 |
20 |
Inductor with an inductance of not more than 62 mH |
0 % |
31.12.2018 |
|
ex850450 95 |
40 |
Coil choke with: — an inductance of 4,7 μH (± 20 %), — a DC resistance of not more than 0,1 Ohms, — an insulation resistance of 100 MOhms or more at 500 V (DC) for use in the manufacture of LCD and LED module power boards (1) |
0 % |
31.12.2015 |
|
ex850450 95 |
50 |
Solenoid coil with — a power consumption of not more than 6 W, — an insulation resistance of more than 100 M ohms, and — an insert hole of 11,4 mm or more, but not more than 11,8 mm |
0 % |
31.12.2017 |
|
ex850490 11 |
10 |
Ferrite cores, other than for deflection yokes |
0 % |
31.12.2018 |
|
ex850511 00 |
31 |
Permanent magnet having a remanence of 455 mT (± 15 mT) |
0 % |
31.12.2018 |
|
ex850511 00 |
33 |
Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements of not more than 15 mm × 10 mm × 2 mm, or in the shape of a disc with a diameter of not more than 90mm, whether or not containing a hole in the centre |
0 % |
31.12.2018 |
|
ex850511 00 |
35 |
Permanent magnets of an alloy of either neodymium, iron and boron, or samarium and cobalt coated having undergone inorganic passivation (inorganic coating) using zinc phosphate for the industrial manufacture of products in motor or sensory applications (1) |
0 % |
31.12.2017 |
|
ex850511 00 |
50 |
Bars specifically shaped, intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions: — a length of 15 mm or more but not more than 52 mm, — a width of 5 mm or more but not more than 42 mm, of a kind to be used in the manufacture of electric servomotors for industrial automation |
0 % |
31.12.2017 |
|
ex850511 00 |
60 |
Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with — a diameter of not more than 45 mm, — a height of not more than 45 mm, of a kind used in the manufacture of permanent magnets after magnetisation |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex850511 00 |
70 |
Disc consisting of an alloy of neodymium, iron and boron, covered with nickel, that after magnetisation is intended to become permanent magnet — whether or not containing a hole in the centre, — with a diameter of not more than 90 mm, of a kind used in car loudspeakers |
0 % |
31.12.2018 |
|
ex850511 00 |
80 |
Articles in the form of a triangle, square or rectangle, intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions: — a length of 15 mm or more but not more than 105 mm, — a width of 5 mm or more but not more than 105 mm, — a height of 3 mm or more but not more than 55 mm |
0 % |
31.12.2018 |
|
ex850519 90 |
30 |
Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetization with a remanence between 350 mT and 470 mT |
0 % |
31.12.2018 |
|
ex850520 00 |
30 |
Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles (1) |
0 % |
31.12.2018 |
|
ex850590 20 |
91 |
Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading 8517 (1) |
0 % |
31.12.2018 |
|
ex850650 90 |
10 |
Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V |
0 % |
31.12.2018 |
|
ex850650 90 |
20 |
Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit |
0 % |
31.12.2018 |
|
ex850650 90 |
30 |
Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah |
0 % |
31.12.2018 |
|
ex850710 20 |
80 |
Lead acid starter battery, with: — a charge acceptance capacity of 200 % or more of the level of an equivalent conventional flooded battery during the first 5 seconds of charge, — a liquid electrolyte, for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls (1) |
0 % |
31.12.2015 |
|
ex850710 20 |
85 |
Lead-acid accumulators or -modules, of a kind used for starting piston engines with — a nominal capacity of 32 Ah, — a length of not more than 205 mm, — a width of not more than 130 mm and — a height of not more than 190 mm for use in the manufacture of articles of CN-code 8711 (1) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex850730 20 |
30 |
Cylindrical nickel-cadmium accumulator or module, with a length of 65,3 mm (± 1,5 mm) and a diameter of 14,5 mm (± 1mm), having a nominal capacity of 1 000 mAh or more, for use in the manufacture of rechargeable batteries (1) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex850750 00 *ex850760 00 |
20 20 |
Rectangular accumulator or module, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries (1) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex850750 00 |
30 |
Cylindrical nickel-hydride accumulator or module, of a diameter of not more than 14,5 mm, for the manufacture of rechargeable batteries (1) |
0 % |
31.12.2018 |
|
ex850760 00 |
25 |
Rectangular modules for incorporation in lithium-ion rechargeable batteries, with: — a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1mm) — a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm) — a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1mm) — a weight of 45,9 kg or 46,3 kg — a rating of 75 Ah and — a nominal voltage of 60 V |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex850760 00 |
30 |
Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (1) |
0 % |
31.12.2014 |
|
ex850760 00 |
35 |
Lithium-ion rechargeable batteries, with: — a length of 1 475 mm or more, but not more than 2 200 mm — a width of 935 mm or more, but not more than 1 400 mm — a height of 260 mm or more, but not more than 310 mm — a weight of 320 kg or more, but not more than 390 kg — a nominal capacity of 18,4 Ah or more, but not more than 130 Ah, — put up in packs of 12 or 16 modules |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex850760 00 |
40 |
Batteries of ion-lithium electric accumulators or module rechargeable with: — a length of 1 203 mm or more, but not more than 1 297 mm, — a width of 282 mm or more, but not more than 772 mm, — a height of 792 mm or more, but not more than 839 mm, — a weight of 260 kg or more, but not more than 293 kg, — power of 22 kWh or 26 kWh, and — constituted of 24 or 48 modules |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex850760 00 |
50 |
Modules for the assembly of batteries of ion lithium electric accumulators with: — a length of 298 mm or more, but not more than 408 mm, — a width of 33,5 mm or more, but not more than 209 mm, — a height of 138 mm or more, but not more than 228 mm, — a weight of 3,6 kg or more, but not more than 17 kg, and — a power of 458 Wh or more, but not more than 2 158 Wh |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex850760 00 |
55 |
Lithium-ion accumulator or module in cylindrical form, with: — a base similar to an ellipse squeezed in the middle, — a length of 49 mm or more (not including terminals), — a width of 33,5 mm or more, — a thickness of 9,9 mm or more, — a rated capacity of 1,75 Ah or more, and — a rated voltage of 3,7 V, for the manufacture of rechargeable batteries (1) |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex850760 00 |
57 |
Lithium-ion accumulator or module, cuboid in shape, with: — some of the corners rounded off, — a length of 76 mm or more (not including terminals), — a width of 54,5 mm or more, — a thickness of 5,2 mm or more, — a rated capacity of 3 100 mAh or more, and — a rated voltage of 3,7 V, for the manufacture of rechargeable batteries (1) |
0 % |
31.12.2017 |
|
ex850760 00 |
60 |
Lithium-ion rechargeable batteries, with: — a length of 1 213 mm or more, but not more than 1 575 mm, — a width of 245 mm or more but not more than 1 200 mm, — a height of 265 mm or more, but not more than 755 mm, — a weight of 265 kg or more but not more than 294 kg, — a nominal capacity of 66,6 Ah, put up in packs of 48 modules |
0 % |
31.12.2015 |
|
ex850760 00 |
65 |
Cylindrical Lithium Ion Cell with — 3,5 VDC to 3,8 VDC, — 300 mAh to 900 mAh and — a diameter of 10,0 mm to 14,5 mm |
0 % |
31.12.2016 |
|
ex850760 00 |
70 |
Rectangular modules for incorporation in lithium-ion rechargeable batteries: — of a length of 350 mm or 312 mm, — of a width of 79,8 mm or 225 mm, — of a height of 168 mm or 35 mm, — of a weight of 6,2 kg or 3,95 kg, — with a rating of 129 Ah or 66,6 Ah |
0 % |
31.12.2015 |
|
ex850760 00 |
75 |
Rectangular lithium-ion-accumulator, with — a metal casing, — a length of 173 mm (± 0,15 mm), — a width of 21 mm (± 0,1 mm), — a height of 91 mm (± 0,15 mm), — a nominal voltage of 3,3 V and, — a nominal capacity of 21 Ah or more |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
*ex850760 00 |
80 |
Rectangular lithium-ion-accumulator or module, with — a metal casing, — a length of 171 mm (± 3 mm), — a width of 45,5 mm (± 1 mm), — a height of 115 mm (± 1 mm), — a nominal voltage of 3,75 V and — a nominal capacity of 50 Ah for use in the manufacture of rechargeable batteries for motor vehicles (1) |
0 % |
31.12.2015 |
|
ex850790 80 |
70 |
Cut plate of nickel-plated copper foil, with: — a width of 70 mm (± 5 mm), — a thickness of 0,4 mm (± 0,2 mm), — a length of not more than 55 mm, for use in the manufacture of lithium-ion electric vehicle batteries (1) |
0 % |
31.12.2016 |
|
ex850870 00 ex853710 99 |
10 96 |
Electronic circuit card without separate housing for actuating and controlling vacuum cleaner brushes powered by not more than 300 W |
0 % |
31.12.2015 |
|
ex850870 00 ex853710 99 |
20 98 |
Electronic circuit cards that: — are connected by wire or radio frequency to each other and the motor controller card, and — regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program, — whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full) |
0 % |
31.12.2015 |
|
ex851240 00 ex851680 20 |
10 20 |
Car door mirror heating foil: — with two electrical contacts, — with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), — with a protective paper film on both sides |
0 % |
31.12.2018 |
|
ex851690 00 |
60 |
Ventilation sub-assembly of an electric deep-fat fryer: — fitted with a motor having a power rating of 8 W at 4 600 rpm, — governed by an electronic circuit, — operating at ambient temperatures above 110 °C, — fitted with a thermoregulator |
0 % |
31.12.2014 |
|
ex851690 00 |
70 |
Inner pot: — containing side and central openings, — of annealed aluminium, — with a ceramic coating, heat resistant to more than 200 °C for use in the manufacture of an electric fryer (1) |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex851829 95 |
30 |
Loudspeakers of: — an impedance of 3 Ohm or more, but not more than 16 Ohm, — a nominal power of 2 W or more, but not more than 20 W, — with or without plastic bracket, and — with or without electric cable fitted with connectors, of a kind used for TV sets and video monitors manufacture as well as home entertainment systems |
0 % |
31.12.2017 |
|
ex851830 95 |
20 |
Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 mm × 6 mm × 8 mm |
0 % |
31.12.2018 |
|
ex851840 80 |
91 |
Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality |
0 % |
31.12.2014 |
|
ex851840 80 |
92 |
Circuit board sub-assembly, comprising power supply, active equalizer and power amplifier circuits |
0 % |
31.12.2015 |
|
ex851890 00 |
91 |
Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers (1) |
0 % |
31.12.2018 |
|
ex852190 00 |
20 |
Digital video recorder: — without a hard disk drive, — with or without a DVD-RW drive, — with either motion detection or capability of motion detection through IP connectivity via LAN connector — with or without a USB serial port, for use in the manufacture of Closed-circuit television (CCTV) surveillance systems (1) |
0 % |
31.12.2014 |
|
ex852290 49 |
50 |
Electronic assembly for a laser read-head of a compact disc player, comprising: — a printed circuit, — a photo-detector, in the form of a monolithic integrated circuit, contained in a housing, — not more than 3 connectors, — not more than 1 transistor, — not more than 3 variable and 4 fixed resistors, — not more than 5 capacitors, the whole mounted on a support |
0 % |
31.12.2018 |
|
ex852290 49 ex852799 00 ex852990 65 |
60 10 25 |
Printed circuit board assembly comprising: — a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities, — a microprocessor capable of receiving remote control messages and controlling the tuner chipset, for use in the manufacture of home entertainment systems (1) |
0 % |
31.12.2014 |
|
ex852290 49 ex852799 00 ex852990 65 |
65 20 40 |
Printed circuit board subassembly, comprising: — a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder, — a radio frequency (RF) remote control receiver, — an infrared remote control signal transmitter, — a SCART signal generator — a TV state sensor for use in the manufacture of home entertainment systems (1) |
0 % |
31.12.2014 |
|
ex852290 49 |
70 |
Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit |
0 % |
31.12.2018 |
|
ex852290 80 |
15 |
Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and/or integrated circuits in products of heading 8521 |
0 % |
31.12.2017 |
|
ex852290 80 ex852990 92 |
30 30 |
Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (1) |
0 % |
31.12.2016 |
|
ex852290 80 |
65 |
Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not capable of double layer recording |
0 % |
31.12.2018 |
|
ex852290 80 |
70 |
Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading 8521 (1) |
0 % |
31.12.2018 |
|
ex852290 80 |
75 |
Optical reading head for CD player, consisting of one laser diode, one photo detector integrated circuit and one beam splitter |
0 % |
31.12.2018 |
|
ex852290 80 |
80 |
Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519, 8521, 8526, 8527, 8528 or 8543 (1) |
0 % |
31.12.2018 |
|
ex852290 80 |
81 |
Laser optical pick up unit for the reproduction of optical signals from CD or DVD and the recording of optical signal on DVD, comprising at least — a laser diode, — a laser driver integrated circuit, — a photo detector integrated circuit, — a front monitor integrated circuit and an actuator, for use in the manufacture of products falling within heading 8521 (1) |
0 % |
31.12.2016 |
|
ex852290 80 |
83 |
Blu-ray optical pick-up unit, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least: — laser diodes operating at three different wavelengths, — a photo detector integrated circuit and — an actuator, for the manufacture of products falling within heading 8521 (1) |
0 % |
31.12.2018 |
|
ex852290 80 |
84 |
Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least: — an optical pick up unit with laser diodes operating at three different wavelengths, — a spindle motor, — a stepping motor |
0 % |
31.12.2018 |
|
ex852290 80 |
85 |
Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading 8521 (1) |
0 % |
31.12.2018 |
|
ex852290 80 |
96 |
Hard disk drive, for incorporation in products of heading 8521 (1) |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex852290 80 |
97 |
Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8521 (1) |
0 % |
31.12.2016 |
|
ex852580 19 |
20 |
Assembly for television cameras of dimensions of not more than 10 mm × 15 mm × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution of not more than 1 024 × 1 280 pixels, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 8517 12 00 (1) |
0 % |
31.12.2018 |
|
ex852580 19 |
25 |
Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with: — a sensitivity in the wavelength area of 8 μm or more, but not more than 14 μm, — a resolution of 324 × 256 pixels, — a weight of not more than 400 g, — measurements of not more than 70 mm × 67 mm × 75 mm, — a waterproof housing and an automotive- qualified plug and — a deviation of the output signal over the entire work temperature range of not more than 20 % |
0 % |
31.12.2014 |
|
▼M1 ————— |
||||
|
*ex852580 19 *ex852580 91 |
31 10 |
Closed circuit television (CCTV) camera: — of a weight of not more than 5,9 kg, — without a housing, — of dimensions of not more than 405 mm × 315 mm, — with a single Charge-Couple-Device (CCD) or Complementary Metal–Oxide–Semiconductor (CMOS) sensor, — with effective pixels of not more than 5 megapixels, for use in CCTV surveillance systems (1) |
0 % |
31.12.2018 |
|
ex852580 19 |
35 |
Image scanning cameras, using: — a ‘Dynamic overlay lines’ system, — an output NTSC video signal, — a voltage of 6,5 V, — an illuminance of 0,5 lux or more |
0 % |
31.12.2014 |
|
ex852580 19 |
40 |
Assembly for cameras used in computer notebooks of dimensions of not more than 15 mm × 25 mm × 25 mm, comprising an image sensor, an objective and a colour processor, having an image resolution of not more than 1 600 × 1 200 pixels, whether or not fitted with cable and/or housing, whether or not mounted on a base and containing a LED chip (1) |
0 % |
31.12.2016 |
|
ex852580 19 |
45 |
Camera module with a resolution of 1 280 * 720 P HD, with two microphones, for use in the manufacture of products of heading 8528 (1) |
0 % |
31.12.2017 |
|
ex852580 19 |
50 |
Remote camera head, whether or not contained in a housing — with dimensions (without cable socket) of not more than 27 × 30 × 38,5 mm (widthxheightxlength), — with three MOS imaging sensors with two or more effective megapixels per sensor and a prism block for distribution of the RGB spectrum colours to the three sensors, — with a C-Mount lens mount, — with a weight of not more than 70 g, — with an LVDS digital video output, — with a permanent EEPROM memory for local storage of calibration data for colour rendering and defective pixel compensation of a kind used in the manufacture of miniaturised industrial camera systems |
0 % |
31.12.2018 |
|
ex852580 19 |
55 |
Camera module with a resolution of 1 920 × 1 080 P HD with two microphones for use in the manufacture of products falling within heading 8528 (1) |
0 % |
31.12.2018 |
|
ex852691 20 ex852729 00 |
80 10 |
Integrated audio module (IAM) with a digital video output for connection to an LCD touch screen monitor, interfaced over the Media Oriented Systems Transport (MOST) network and transported over the MOST High protocol, with or without — a printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner, — a hard disk drive supporting multiple maps, — a HD radio, — a voice recognition system, — a CD and DVD drive, and including — Bluetooth, MP3 and USB input connectivity, — a voltage of 10 V or more but not more than 16 V, for the use in the manufacture of vehicles in Chapter 87 (1) |
0 % |
31.12.2015 |
|
ex852791 99 ex852990 65 |
10 35 |
Assembly consisting of at least: — an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator, — a transformer and — a radio broadcast receiver |
0 % |
31.12.2014 |
|
ex852849 10 |
10 |
Video monitor comprising: — a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of not more than 110 mm and equipped with a deflector yoke, and — a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer, the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus (1) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex852859 70 |
10 |
Liquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less, — without a housing, with back cover and mounting frame, — or with a housing, used for permanent incorporation or permanent mounting, during industrial assembly, into goods of Chapters 84 to 90 and 94 (1) |
0 % |
31.12.2018 |
|
ex852910 80 |
20 |
Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing |
0 % |
31.12.2018 |
|
ex852910 80 |
50 |
Ceramic filter for a centre frequency of 450 kHz (± 1,5 kHz) or 455 kHz (± 1,5 kHz), with a bandwidth of not more than 30 kHz at 6 dB and not more than 70 kHz at 40 dB, contained in a housing |
0 % |
31.12.2018 |
|
ex852910 80 |
60 |
Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not more than 1 990 MHz with an insertion loss of not more than 3,5 dB, contained in a housing |
0 % |
31.12.2018 |
|
ex852990 65 ex854890 90 |
30 44 |
Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing |
0 % |
31.12.2018 |
|
ex852990 65 |
45 |
Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of products falling within heading 8527 (1) |
0 % |
31.12.2014 |
|
*ex852990 65 |
50 |
Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528 (1) |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
ex852990 65 |
65 |
Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module |
0 % |
31.12.2015 |
|
ex852990 65 |
70 |
Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, for use in the manufacture of LCD modules (1) |
0 % |
31.12.2016 |
|
ex852990 65 |
75 |
Modules comprising at least semiconductor chips for: — the generation of driving signals for pixel addressing, or — driving addressing pixels |
0 % |
31.12.2017 |
|
ex852990 92 |
25 |
LCD modules, not combined with touch screen facilities, solely consisting of: — one or more TFT glass or plastic cells, — a die cast heat sink, — a backlight unit, — one printed circuit board with micro controller, and — LVDS (Low Voltage Differential Signalling) interface, for use in the manufacture of radios for motor vehicles (1) |
0 % |
31.12.2015 |
|
ex852990 92 |
32 |
Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading 8528 (1) |
0 % |
31.12.2018 |
|
ex852990 92 |
40 |
Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors (1) |
0 % |
31.12.2018 |
|
ex852990 92 |
41 |
Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors (1) |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex852990 92 |
42 |
Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 8528 (1) |
0 % |
31.12.2018 |
|
ex852990 92 |
43 |
Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex852990 92 *ex854890 90 |
44 55 |
LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only |
0 % |
31.12.2018 |
|
ex852990 92 |
45 |
Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats |
0 % |
31.12.2018 |
|
ex852990 92 |
47 |
Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel |
0 % |
31.12.2014 |
|
▼M1 ————— |
||||
|
ex852990 92 ex853669 90 |
49 83 |
AC socket with a noise filter, composed of: — AC socket (for power cord connection) of 230 V, — integrated noise filter composed of capacitors and inductors, — cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit, whether or not equipped with a metal support, which joins the AC socket to the PDP TV set |
0 % |
31.12.2014 |
|
ex852990 92 |
50 |
Colour LCD display panel for LCD monitors of heading 8528: — with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm, — with backlight, micro-controller, — with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface, — in a housing with or without a heat sink at the back of the housing, — without a signal-processing module, for use in the manufacture of vehicles of chapter 87 (1) |
0 % |
31.12.2015 |
|
ex852990 92 |
70 |
Rectangular fastening and covering frame: — of an aluminium alloy containing silicon and magnesium, — with a length of 900 mm or more but not more than 1 500 mm, — with a width of 600 mm or more but not more than 950 mm, of a kind used for the production of TV sets |
0 % |
31.12.2017 |
|
ex853180 95 |
40 |
Electro-accoustic transducer |
0 % |
31.12.2018 |
|
ex853590 00 |
20 |
Printed circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back light units for LCD modules (1) |
0 % |
31.12.2018 |
|
ex853590 00 ex853650 80 |
30 83 |
Semiconductor module switch in a casing: — consisting of an IGBT transistor chip and a diode chip on one or more lead frames, — for a voltage of 600 V or 1 200 V |
0 % |
31.12.2015 |
|
ex853630 30 |
11 |
Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing |
0 % |
31.12.2018 |
|
ex853641 90 |
30 |
A cubic-shape power relay with: — an electromechanical switching function, — an electrification current of 3 amperes or more but not more than 16 amperes, — a driver voltage 5 volts or more but not more than 24 volts, — a distance between switching pins not more than 12,5 mm |
0 % |
31.12.2018 |
|
ex853649 00 |
91 |
Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 mm in length excluding wires, with a maximum leakage rate of 10–6 cm3 He/sec at one bar in the temperature range 0 °C to 160 °C, to be incorporated into compressors for refrigerating equipment (1) |
0 % |
31.12.2018 |
|
ex853650 11 |
31 |
Switch of the printed circuit mount type, operating at a force of 4,9 N (± 0,9 N), contained in a housing |
0 % |
31.12.2018 |
|
ex853650 11 |
32 |
Mechanical tact switch for connecting electronic circuits, operating at a voltage of not more than 60V and at a current strength of not more than 50mA, for use in the manufacture of products of headings 8521 or 8528 (1) |
0 % |
31.12.2018 |
|
ex853650 19 |
91 |
Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections |
0 % |
31.12.2018 |
|
ex853650 19 ex853650 80 |
93 97 |
Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing |
0 % |
31.12.2018 |
|
ex853650 80 |
81 |
Mechanical speed governer switches for connecting electrical circuits, with: — a voltage of 240 V or more but not more than 250 V, — an amperage of 4 A or more but not more than 6 A, for use in the manufacture of machines falling within heading 8467 (1) |
0 % |
31.12.2014 |
|
ex853650 80 |
82 |
Mechanical switches for connecting electrical circuits, with: — a voltage of 240 V or more but not more than 300 V, — an amperage of 3 A or more but not more than 15 A, for use in the manufacture of machines falling within heading 8467 (1) |
0 % |
31.12.2014 |
|
ex853650 80 |
93 |
Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time of not more than 50 ms and an actuating current of not more than 500 mA at a voltage of 12 V |
0 % |
31.12.2018 |
|
ex853650 80 |
98 |
Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not more than 250 V and at a current strength of not more than 5 A, for use in the manufacture of products of headings 8521 or 8528 (1) |
0 % |
31.12.2018 |
|
ex853669 90 |
51 |
SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528 (1) |
0 % |
31.12.2017 |
|
ex853669 90 |
81 |
Pitch connector for use in the manufacture of LCD television reception apparatus (1) |
0 % |
31.12.2017 |
|
ex853669 90 |
82 |
Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least: — a pulse transformer, including a wide-band ferrite core, — a common mode coil, — a resistor, — a capacitor, for use in the manufacture of products falling within headings 8521 or 8528 (1) |
0 % |
31.12.2014 |
|
ex853669 90 |
84 |
Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528 (1) |
0 % |
31.12.2015 |
|
ex853669 90 |
85 |
Socket or plug, built into a plastic or metal housing, with no more than 8 pins, for use in the manufacture of products falling within headings 8521 or 8528 (1) |
0 % |
31.12.2016 |
|
ex853669 90 |
86 |
High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528 (1) |
0 % |
31.12.2016 |
|
ex853669 90 |
87 |
D-Subminiature (D-sub) type socket or plug, built into a plastic or metal housing, with 15 pins in 3 rows, for use in the manufacture of products falling within headings 8521 or 8528 (1) |
0 % |
31.12.2016 |
|
ex853669 90 |
88 |
Secure Digital (SD), CompactFlash, "Smart Card" and 64- pin PC-card female connectors, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1 000 V |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex853670 00 |
10 |
Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528 (1) |
0 % |
31.12.2016 |
|
▼M1 ————— |
||||
|
ex853690 85 |
92 |
Metallic stamped frame with connections |
0 % |
31.12.2018 |
|
ex853690 85 ex854449 93 |
94 10 |
Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements |
0 % |
31.12.2018 |
|
ex853690 85 |
97 |
Secure Digital (SD) type memory card slot, push-push or push-pull type, for use in the manufacture of goods falling within headings 8521 or 8528 (1) |
0 % |
31.12.2016 |
|
ex853710 91 |
30 |
Data processing and evaluation vehicle dashboard control module, operating through the CAN - bus protocol, containing at least: — microprocessor relays, — a stepper motor, — Electrically Erasable Programmable Read-Only (EEPROM) memory, and — other passive components (such as connectors, diodes, voltage stabilizer, resistors, capacitors, transistors), with a voltage of 13,5 V |
0 % |
31.12.2017 |
|
ex853710 91 |
40 |
Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with a main power input of 400 V AC, a logic power input of 24 V DC, equipped at least with: — a PCBA board(s) with logic and programmable circuits and other electronic parts as connectors, capacitors, coils or resistors, — contactors, — an automatic circuit breaker, — a fuse, — internal connecting cables, — a main power switch, — electrical connectors or cables for connecting external devices, — a metal casing with dimension of 370 × 300 × 80 mm or more, but not more than 570 × 420 × 125 mm, used for controlling and powering machines of a kind used for recycling or sorting of plastic, metal or glass packaging |
0 % |
31.12.2018 |
|
ex853710 99 |
30 |
Motor bridge ICs without programmable memory consisting of: — one or more integrated circuits, not interconnected, on separate lead frames, — also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars — mounted in a plastic housing |
0 % |
31.12.2018 |
|
ex853710 99 |
92 |
Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors |
0 % |
31.12.2018 |
|
ex853710 99 |
93 |
Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems (1) |
0 % |
31.12.2018 |
|
ex853710 99 ex854370 90 |
94 20 |
Unit consisting of two junction field effect transistors contained in a dual lead frame housing |
0 % |
31.12.2018 |
|
ex853710 99 |
97 |
Electronic controller card for actuating and controlling of a single-phase electric AC commutator motor, with an output of 750 W or more and an input power of more than 1 600 W but not more than 2 700 W |
0 % |
31.12.2015 |
|
ex853890 99 |
92 |
Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 mm × 48 mm |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex853890 99 |
95 |
Copper base plate, of a kind used as a heatsink [in the manufacture] of IGBT modules containing more components than IGBT chips and diodes with a voltage of 650 V or more but not more than 1 200 V (1) |
0 % |
31.12.2018 |
|
ex853939 00 |
20 |
Cold cathode (CCFL) or external electrode (EEFL) fluorescent lamps, of a diameter of not more than 5 mm and with a length of more than 120 mm but not more than 1 570 mm |
0 % |
31.12.2016 |
|
ex854011 00 |
93 |
Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 79 cm or more |
0 % |
31.12.2016 |
|
ex854020 80 |
91 |
Photomultiplier |
0 % |
31.12.2016 |
|
ex854071 00 |
20 |
Continuous wave magnetron with a fixed frequency of 2 460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 8516 50 00 (1) |
0 % |
31.12.2018 |
|
ex854089 00 |
91 |
Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons |
0 % |
31.12.2018 |
|
ex854089 00 |
92 |
Vacuum fluorescent display tube |
0 % |
31.12.2018 |
|
ex854370 90 ex940540 39 ex940540 99 |
23 50 03 |
Semiconductor device for the conversion of electrical energy into visible, infra-red or ultra-violet rays: — whether or not with a housing — with electrical leads, — including one or more light-emitting semiconductor chips which may be electrically connected among each other and which may be furnished for their protection with one or multiple protective diodes, — formed/shaped as an indivisible entity — for use in the manufacture of lighting gear employed for solid state lighting / for general lighting purposes (1) |
0 % |
31.12.2018 |
|
ex854370 90 |
30 |
Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing |
0 % |
31.12.2018 |
|
ex854370 90 |
35 |
Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing |
0 % |
31.12.2018 |
|
ex854370 90 |
40 |
High-frequency amplifier comprising one or more integrated circuits and discrete capacitor chips on a metal flange in a housing |
0 % |
31.12.2015 |
|
ex854370 90 |
45 |
Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing |
0 % |
31.12.2018 |
|
ex854370 90 |
55 |
Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing |
0 % |
31.12.2018 |
|
ex854370 90 |
60 |
Oscillator, with a centre frequency of 20 GHz or more but not more than 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing |
0 % |
31.12.2018 |
|
ex854370 90 |
65 |
Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing |
0 % |
31.12.2018 |
|
ex854370 90 |
80 |
Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing |
0 % |
31.12.2018 |
|
ex854370 90 |
85 |
Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing |
0 % |
31.12.2018 |
|
ex854370 90 |
95 |
Mobile telephone view and control module comprising of: — a mains power/ CAN (Controller area network) output socket, — a universal serial bus (USB) and audio IN/OUT ports and — incorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST), for use in the manufacture of vehicles of Chapter 87 (1) |
0 % |
31.12.2015 |
|
ex854390 00 |
20 |
Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips |
0 % |
31.12.2014 |
|
ex854390 00 |
30 |
Assembly of products falling within heading 8541 or 8542 mounted on a printed circuit, contained in a housing |
0 % |
31.12.2018 |
|
ex854390 00 |
40 |
Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back |
0 % |
31.12.2017 |
|
ex854420 00 ex854442 90 ex854449 93 ex854449 95 |
10 20 20 10 |
PET/PVC insulated flexible cable with: — a voltage of not more than 60 V, — a current of not more than 1 A, — a heat resistance of not more than 105 °C, — individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm), — a distance between conductors of not more than 0,5 mm and — a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm |
0 % |
31.12.2018 |
|
ex854430 00 |
30 |
Multi-measurement wire harness of a voltage of 5 V or more but not more than 90 V capable of measuring some or all of the following; — a travel speed of not more than 24 km/h — a motor speed of not more than 4 500 rpm — hydraulic pressure of not more than 25 Mpa — mass of not more than 50 metric tonnes for use in the manufacture of vehicles of heading 8427 (1) |
0 % |
31.12.2018 |
|
ex854442 90 |
10 |
Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with: — a voltage of 1,25 V (± 0,25 V) — connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm, — outer screening shielding, used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits |
0 % |
31.12.2018 |
|
ex854442 90 |
30 |
PET insulated electric conductor with: — 10 or 80 individual wires, — a length of 50 mm or more, but not more than 800 mm, — connector(s) and/or plug(s) fitted at one or both ends, for use in the manufacture of products falling within headings 8521 and 8528 (1) |
0 % |
31.12.2017 |
|
ex854519 00 |
20 |
Carbon electrodes, for use in the manufacture of zinc-carbon batteries (1) |
0 % |
31.12.2018 |
|
ex854590 90 |
20 |
Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes |
0 % |
31.12.2015 |
|
ex854710 00 |
10 |
Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not more than 250 mm, for the manufacture of vacuum interrupters (1) |
0 % |
31.12.2018 |
|
ex854810 29 |
10 |
Spent lithium-ion or nickel metal hydride electric accumulators |
0 % |
31.12.2016 |
|
ex854890 90 |
41 |
Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing |
0 % |
31.12.2018 |
|
ex854890 90 |
43 |
Contact image sensor |
0 % |
31.12.2018 |
|
ex854890 90 |
47 |
Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 440 nm or more but not more than 660 nm, contained in a lead frame housing whose exterior dimensions - without fittings – do not exceed 12 mm × 12 mm |
0 % |
31.12.2018 |
|
ex854890 90 |
48 |
Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm |
0 % |
31.12.2018 |
|
ex854890 90 |
49 |
LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only |
0 % |
31.12.2018 |
|
ex854890 90 |
50 |
Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 8528 (1) |
0 % |
31.12.2017 |
|
ex870423 91 |
20 |
Motor chassis with a self-ignition capacity of at least 8 000 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm (1) |
0 % |
31.12.2017 |
|
ex870830 91 |
10 |
Drum type parking brake: — operating within the service brake disk, — with a diameter of 170 mm or more but not more than 175 mm, for use in the manufacture of motor vehicles (1) |
0 % |
31.12.2015 |
|
ex870899 97 |
20 |
Metal housing caps for incorporation into balancing-arms or spherical bearings used in the suspension systems for the front wheels of motor vehicles (1) |
0 % |
31.12.2016 |
|
ex871491 10 ex871491 10 ex871491 10 |
23 33 70 |
Frame, constructed from aluminium or aluminium and carbon, for the use in the manufacture of bicycles (1) |
0 % |
31.12.2018 |
|
ex871491 30 ex871491 30 ex871491 30 |
23 33 70 |
Front forks, suspended, constructed from aluminium, for use in the manufacture of bicycles (1) |
0 % |
31.12.2018 |
|
ex880330 00 |
50 |
Pre-formed helicopter rotor shafts: — of circular cross-section, — with a length of 1 249,68 mm or more, but not more than 1 496,06 mm, — of an external diameter of 81,356 mm or more, but not more than 82,2198 mm, — swaged on both ends to an external diameter of 63,8683 mm or more, but not more than 66,802 mm, — heat treated according to standards MIL-H-6088, AMS 2770 or AMS 2772 |
0 % |
31.12.2016 |
|
ex900110 90 |
10 |
Image reverser made up from an assembly of optical fibres |
0 % |
31.12.2018 |
|
ex900110 90 |
30 |
Polymer optical fibre with: — a poly(methyl methacrylate) core, — a cladding of fluorinated polymer, — a diameter of not more than 3,0 mm, and — a length of more than 150 m, of a kind used in the manufacture of polymer fibre cables |
0 % |
31.12.2016 |
|
ex900120 00 |
10 |
Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film |
0 % |
31.12.2017 |
|
ex900120 00 ex900190 00 |
20 55 |
Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut |
0 % |
31.12.2018 |
|
ex900190 00 |
21 |
Multi-Optical-Path (MOP) film, in rolls, based on poly(ethylene terephthalate) (PET) material: — having a total thickness of 100 μm or more, but not more than 240 μm, — having a total transmittance of more than 55 % but not more than 65 %, determined by standard method JIS K7105 related to ASTM D1003 and — haze more than 70 % but not more than 80 %, determined by standard method JIS K7105 related to ASTM D1003 |
0 % |
31.12.2014 |
|
ex900190 00 |
25 |
Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material |
0 % |
31.12.2017 |
|
ex900190 00 |
35 |
Rear projection screen, comprising a lenticular plastic plate |
0 % |
31.12.2018 |
|
ex900190 00 |
45 |
Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends |
0 % |
31.12.2018 |
|
ex900190 00 |
60 |
Reflector or diffuser sheets in rolls |
0 % |
31.12.2018 |
|
ex900190 00 |
65 |
Optical film with a minimum of 5 multi-layer structures, including a back side reflector, a front side coating and a contrast filter with a pitch of not more than 0,65 μm, for use in the manufacture of front projection screens (1) |
0 % |
31.12.2014 |
|
ex900190 00 |
70 |
Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90 ° and a prism pitch of 50 μm |
0 % |
31.12.2016 |
|
ex900190 00 |
75 |
Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules (1) |
0 % |
31.12.2017 |
|
ex900190 00 |
85 |
Light guide panel made of poly(methyl methacrylate): — whether or not cut, — whether or not printed, for use in the manufacture of backlight units for flat screen TVs (1) |
0 % |
31.12.2015 |
|
ex900211 00 |
10 |
Adjustable lens unit, having a focal length of 90 mm or more but not more than 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not more than 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors (1) |
0 % |
31.12.2018 |
|
ex900211 00 |
20 |
Lenses — measuring not more than 80 mm × 55 mm × 50 mm, — with a resolution of 160 lines/mm or better, and — with a zoom ratio of 18 times, of a kind used for the production of visualizers or live image cameras |
0 % |
31.12.2017 |
|
ex900211 00 |
30 |
Lenses — measuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm, — with a resolution of 130 lines/mm or better, and — with a zoom ratio of 18 times of a kind used for the production of visualizers or live image cameras |
0 % |
31.12.2017 |
|
ex900211 00 |
40 |
Lenses — measuring not more than 125 mm × 65 mm × 65 mm, — with a resolution of 125 lines/mm or better, and — with a zoom ratio of 16 times of a kind used for the production of visualizers or live image cameras |
0 % |
31.12.2017 |
|
▼M1 ————— |
||||
|
*ex900211 00 |
50 |
Lens unit: — having a focal length of 25 mm or more but not more than 150 mm, — consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm |
0 % |
31.12.2018 |
|
ex900211 00 |
70 |
Lenses — measuring not more than 180 mm×100 mm×100 mm at a maximum focal length of more than 200 mm, — with an etendue of 7 steradian mm2 or better, and — with a zoom ratio of 16 times of a kind used for the production of visualizers or live image cameras |
0 % |
31.12.2017 |
|
ex900220 00 |
10 |
Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 (1) |
0 % |
31.12.2018 |
|
ex900290 00 |
20 |
Lens, mounted, having a fixed focal length of 3,8 mm (± 0,19 mm) or 8 mm (± 0,4 mm), with a relative aperture of F2.0 and a diameter of not more than 33 mm, for use in the manufacture of charged-coupled (CCD) cameras (1) |
0 % |
31.12.2018 |
|
ex900290 00 |
30 |
Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates |
0 % |
31.12.2018 |
|
ex900290 00 |
40 |
Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material |
0 % |
31.12.2017 |
|
ex901290 90 |
10 |
Energy filters, to be installed on the column of electron microscopes |
0 % |
31.12.2016 |
|
ex901320 00 |
10 |
Carbon dioxide laser, stimulated by high frequency, having an output power of 12 W or more, but not more than 200 W |
0 % |
31.12.2018 |
|
ex901320 00 |
20 |
Laser head assemblies for use in the manufacture of measuring or checking machines for semiconductor wafers or devices (1) |
0 % |
31.12.2018 |
|
ex901320 00 |
30 |
Laser for use in the manufacture of measuring or checking machines for semiconductor wafers or devices (1) |
0 % |
31.12.2018 |
|
ex901410 00 |
30 |
Electronic compass, as a geomagnetic sensor, in a housing (e.g. CSWLP, LGA, SOIC) suitable for fully automated printed circuit board (PCB) assembly, with the following main components: — a combination of one or more application-specific integrated circuits (ASIC), and — one or more micro-electromechanical sensors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material, of a kind used in the manufacture of products falling in chapters 84-90 and 94 ◄ |
0 % |
31.12.2018 |
|
▼M1 ————— |
||||
|
*ex902290 00 |
10 |
Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, or coated with a layer of amorphous selenium |
0 % |
31.12.2018 |
|
ex902580 40 |
30 |
Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of — a combination of one or more monolithic application-specific integrated circuits (ASIC) and — at least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material |
0 % |
31.12.2018 |
|
ex902710 90 |
10 |
Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing |
0 % |
31.12.2018 |
|
ex902910 00 |
20 |
Device for measuring wheel speed in vehicles (semi-conductor wheel speed sensor), consisting of: — a monolithic integrated circuit in a housing, and — one or more discrete SMD capacitors connected in parallel to the integrated circuit — whether or not with integrated permanent magnets for detecting the movement of a pulse generator |
0 % |
31.12.2018 |
|
ex903180 34 |
30 |
Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing |
0 % |
31.12.2018 |
|
ex903180 38 |
10 |
Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing |
0 % |
31.12.2018 |
|
ex903180 38 |
20 |
Electronic semiconductor accelerometer in a housing, mainly consisting of — a combination of one or more monolithic application-specific integrated circuits (ASIC) and — one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material to be fitted in products under chapter 84 - 90 and 94 |
0 % |
31.12.2018 |
|
ex903190 85 |
20 |
Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing |
0 % |
31.12.2018 |
|
ex903289 00 |
20 |
Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm |
0 % |
31.12.2018 |
|
ex903289 00 |
30 |
Electronic controller of electric power steering (EPS controller) |
0 % |
31.12.2018 |
|
ex903289 00 |
40 |
Digital valve controller for controlling liquids and gases |
0 % |
31.12.2017 |
|
ex940190 80 |
10 |
Ratchet disk of a kind used in the manufacture of reclining car seats |
0 % |
31.12.2015 |
|
ex940190 80 |
20 |
Sidemember with a thickness of 0,8 or more but not more than 3,0 mm, used in the manufacture of reclining car seats (1) |
0 % |
31.12.2018 |
|
ex940190 80 |
30 |
Steel bracket for mounting safety features seats with thickness of 1 mm or more but not more than 2,5 mm used in the manufacture of reclining car seats (1) |
0 % |
31.12.2018 |
|
ex940190 80 |
40 |
Steel handles for controlling the seat adjustment mechanism used in the manufacture of reclining car seats (1) |
0 % |
31.12.2018 |
|
ex940540 35 |
10 |
Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (± 0,2 mm), of a length of 420 mm (± 1 mm) or more but not more than 600 mm (± 1 mm), for the manufacture of goods of heading 8528 (1) |
0 % |
31.12.2018 |
|
ex940540 39 |
10 |
►C1 Ambient light module with a length of 300 mm or more but not more than 600 mm, based on a light engine of a series of 3 or more but not more than 9 specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the flat TV set ◄ |
0 % |
31.12.2018 |
|
ex940540 39 |
20 |
LED array of white silicone, containing: — an LED matrix module measuring 38,6 mm × 20,6 mm (± 0,1 mm), equipped with 128 red and green LED chips, and — a flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor |
0 % |
31.12.2018 |
|
ex940540 39 |
60 |
LED components (equipped with light emitting diodes) fitted with — a plastic casing, — one or more light emitting diode chips either chips manufactured using thin-film technology or so-called sapphire emitter chips and — one or more optional semiconductor chips with electric protection function. — for use in the manufacture of lighting gear employed for general lighting purposes (1) |
0 % |
31.12.2018 |
|
*ex940540 39 *ex940540 99 |
80 07 |
Ambient light LED board to be incorporated in goods of heading 8528 (1) |
0 % |
31.12.2015 |
|
ex940540 99 |
06 |
LED components (equipped with light emitting diodes) fitted with — a casing made of ceramic or circuit board material, — one or more light emitting diode chips either chips manufactured using thin-film technology or so-called sapphire emitter chips — one or more optional semiconductor chips with electric protection function — for use in the manufacture of lighting gear employed for general lighting purposes (1) |
0 % |
31.12.2018 |
|
ex950300 75 ex950300 95 |
10 10 |
Plastic cable car scale models, whether or not with a motor, for printing (1) |
0 % |
31.12.2015 |
|
ex960891 00 |
10 |
Non-fibrous plastic pen-tips with an internal canal |
0 % |
31.12.2018 |
|
ex960891 00 |
20 |
Felt tips and other porous-tips for markers, without internal canal |
0 % |
31.12.2018 |
|
ex961210 10 |
10 |
Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation) |
0 % |
31.12.2018 |
|
(1) Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253 11.10.1993, p. 1). (2) However, the measure is not allowed where processing is carried out by retail or catering undertakings. (3) The specific duty shall apply. (4) A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Article 308d of Regulation (EEC) No 2454/93. (5) CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htm |
||||
ANNEX II
|
CN code |
TARIC |
Supplementary unit |
|
ex390110 10 |
10 |
m3 |
|
ex390190 90 |
30 |
m3 |
|
ex391990 00 |
67 |
m2 |
|
ex392190 10 |
30 |
m2 |
|
ex392330 90 |
10 |
p/st |
|
ex392690 97 |
50 |
p/st |
|
ex392690 97 |
55 |
m2 |
|
ex392690 97 |
65 |
p/st |
|
ex560314 90 |
40 |
m2 |
|
ex560393 90 |
60 |
m2 |
|
ex690919 00 |
15 |
Number of Items (p/st) |
|
ex702000 10 |
10 |
p/st |
|
ex761699 90 |
77 |
p/st |
|
ex690919 00 |
80 |
p/st |
|
ex700600 90 |
70 |
p/st |
|
ex700991 00 |
10 |
p/st |
|
7011 20 00 |
p/st |
|
|
ex732090 10 |
91 |
p/st |
|
ex732599 10 |
20 |
p/st |
|
ex760421 00 |
10 |
p/st |
|
ex760429 90 |
30 |
p/st |
|
ex761300 00 |
20 |
p/st |
|
ex761699 90 |
15 |
p/st |
|
ex761699 90 |
70 |
p/st |
|
ex841199 00 |
40 |
p/st |
|
ex841199 00 |
50 |
p/st |
|
ex842490 00 |
30 |
p/st |
|
ex843120 00 |
40 |
p/st |
|
ex847529 00 |
10 |
p/st |
|
ex848280 00 |
10 |
p/st |
|
ex848340 29 |
60 |
p/st |
|
ex850300 99 |
50 |
p/st |
|
ex850440 90 |
50 |
p/st |
|
ex850440 90 |
60 |
p/st |
|
ex850870 00 |
20 |
p/st |
|
ex853641 90 |
30 |
p/st |
|
ex853710 91 |
40 |
p/st |
|
ex853710 99 |
30 |
p/st |
|
ex853710 99 |
98 |
p/st |
|
ex853890 99 |
95 |
p/st |
|
ex854370 90 |
23 |
p/st |
|
ex854430 00 |
30 |
p/st |
|
ex880330 00 |
40 |
p/st |
|
ex761699 90 |
75 |
p/st |
|
ex810890 90 |
20 |
p/st |
|
ex900390 00 |
10 |
p/st |
|
ex820730 10 |
10 |
p/st |
|
ex830160 00 |
10 |
p/st |
|
ex841391 00 |
20 |
p/st |
|
ex841990 85 |
20 |
p/st |
|
ex843890 00 |
10 |
p/st |
|
ex846890 00 |
10 |
p/st |
|
ex847690 00 |
10 |
p/st |
|
ex847990 80 |
87 |
p/st |
|
ex848190 00 |
20 |
p/st |
|
ex850300 99 |
45 |
p/st |
|
ex851590 00 |
20 |
p/st |
|
ex853190 85 |
20 |
p/st |
|
ex853690 85 |
96 |
p/st |
|
ex854390 00 |
50 |
p/st |
|
ex870891 99 |
10 |
p/st |
|
ex870899 97 |
30 |
p/st |
|
ex903190 85 |
30 |
p/st |
|
ex830990 90 |
10 |
p/st |
|
ex840590 00 |
10 |
p/st |
|
ex840991 00 |
10 |
p/st |
|
ex840999 00 |
20 |
p/st |
|
ex840999 00 |
10 |
p/st |
|
ex847990 80 |
85 |
p/st |
|
ex841199 00 |
30 |
p/st |
|
ex841490 00 |
20 |
p/st |
|
ex841490 00 |
30 |
p/st |
|
ex841490 00 |
40 |
p/st |
|
ex841590 00 |
20 |
p/st |
|
ex841899 10 |
50 |
p/st |
|
ex841899 10 |
60 |
p/st |
|
ex842199 00 |
91 |
p/st |
|
ex842199 00 |
93 |
p/st |
|
ex842230 00 |
10 |
p/st |
|
ex847989 97 |
30 |
p/st |
|
ex843120 00 |
30 |
p/st |
|
ex843999 00 |
10 |
p/st |
|
ex846799 00 |
10 |
p/st |
|
ex853650 11 |
35 |
p/st |
|
ex847780 99 |
10 |
p/st |
|
ex847989 97 |
40 |
p/st |
|
ex847989 97 |
50 |
p/st |
|
ex847990 80 |
80 |
p/st |
|
ex848130 91 |
91 |
p/st |
|
ex848180 59 |
10 |
p/st |
|
ex848180 69 |
60 |
p/st |
|
ex848180 79 |
20 |
p/st |
|
ex848180 99 |
50 |
p/st |
|
ex848180 99 |
60 |
p/st |
|
ex848330 38 |
30 |
p/st |
|
ex848340 29 |
50 |
p/st |
|
ex848340 51 |
20 |
p/st |
|
ex848340 59 |
20 |
p/st |
|
ex848340 90 |
80 |
p/st |
|
ex850300 91 |
31 |
p/st |
|
ex850300 99 |
32 |
p/st |
|
ex850300 99 |
31 |
p/st |
|
ex850300 99 |
33 |
p/st |
|
ex850300 99 |
34 |
p/st |
|
ex850300 99 |
35 |
p/st |
|
ex850300 99 |
40 |
p/st |
|
ex850440 82 |
40 |
p/st |
|
ex850440 82 |
50 |
p/st |
|
ex850440 90 |
20 |
p/st |
|
ex850440 90 |
30 |
p/st |
|
ex850440 90 |
40 |
p/st |
|
ex850450 95 |
20 |
p/st |
|
ex850450 95 |
40 |
p/st |
|
ex850450 95 |
50 |
p/st |
|
ex850490 11 |
10 |
p/st |
|
ex850511 00 |
31 |
p/st |
|
ex850511 00 |
33 |
p/st |
|
ex850511 00 |
35 |
p/st |
|
ex850511 00 |
50 |
p/st |
|
ex850520 00 |
30 |
p/st |
|
ex850590 20 |
91 |
p/st |
|
ex850790 80 |
70 |
p/st |
|
ex850870 00 |
10 |
p/st |
|
ex853710 99 |
96 |
p/st |
|
ex851690 00 |
60 |
p/st |
|
ex851690 00 |
70 |
p/st |
|
ex851830 95 |
20 |
p/st |
|
ex851890 00 |
91 |
p/st |
|
ex852290 49 |
50 |
p/st |
|
ex852290 49 |
60 |
p/st |
|
ex852990 65 |
25 |
p/st |
|
ex852290 49 |
65 |
p/st |
|
ex852990 65 |
40 |
p/st |
|
ex852290 49 |
70 |
p/st |
|
ex852290 80 |
15 |
p/st |
|
ex852290 80 |
30 |
p/st |
|
ex852990 92 |
30 |
p/st |
|
ex852290 80 |
65 |
p/st |
|
ex852290 80 |
70 |
p/st |
|
ex852290 80 |
75 |
p/st |
|
ex852290 80 |
80 |
p/st |
|
ex852290 80 |
81 |
p/st |
|
ex852290 80 |
83 |
p/st |
|
ex852290 80 |
84 |
p/st |
|
ex852290 80 |
85 |
p/st |
|
ex852290 80 |
96 |
p/st |
|
ex852290 80 |
97 |
p/st |
|
ex852990 65 |
50 |
p/st |
|
ex852910 80 |
20 |
p/st |
|
ex852910 80 |
50 |
p/st |
|
ex852910 80 |
60 |
p/st |
|
ex852990 65 |
30 |
p/st |
|
ex854890 90 |
44 |
p/st |
|
ex852990 65 |
45 |
p/st |
|
ex852990 65 |
55 |
p/st |
|
ex852990 65 |
60 |
p/st |
|
ex852990 65 |
65 |
p/st |
|
ex852990 65 |
70 |
p/st |
|
ex852990 65 |
75 |
p/st |
|
ex852990 92 |
25 |
p/st |
|
ex852990 92 |
32 |
p/st |
|
ex852990 92 |
40 |
p/st |
|
ex852990 92 |
41 |
p/st |
|
ex852990 92 |
42 |
p/st |
|
ex852990 92 |
43 |
p/st |
|
ex852990 92 |
44 |
p/st |
|
ex852990 92 |
45 |
p/st |
|
ex852990 92 |
47 |
p/st |
|
▼M1 ————— |
||
|
ex852990 92 |
49 |
p/st |
|
ex853669 90 |
83 |
p/st |
|
ex852990 92 |
50 |
p/st |
|
ex852990 92 |
70 |
p/st |
|
ex853180 95 |
40 |
p/st |
|
ex853590 00 |
20 |
p/st |
|
ex853590 00 |
30 |
p/st |
|
ex853650 80 |
83 |
p/st |
|
ex853630 30 |
11 |
p/st |
|
ex853649 00 |
91 |
p/st |
|
ex853650 11 |
31 |
p/st |
|
ex853650 11 |
32 |
p/st |
|
ex853650 19 |
91 |
p/st |
|
ex853650 19 |
93 |
p/st |
|
ex853650 80 |
97 |
p/st |
|
ex853650 80 |
81 |
p/st |
|
ex853650 80 |
82 |
p/st |
|
ex853650 80 |
93 |
p/st |
|
ex853650 80 |
98 |
p/st |
|
ex853669 90 |
51 |
p/st |
|
ex853669 90 |
81 |
p/st |
|
ex853669 90 |
82 |
p/st |
|
ex853669 90 |
84 |
p/st |
|
ex853669 90 |
85 |
p/st |
|
ex853669 90 |
86 |
p/st |
|
ex853669 90 |
87 |
p/st |
|
ex853669 90 |
88 |
p/st |
|
ex853670 00 |
10 |
p/st |
|
▼M1 ————— |
||
|
ex853690 85 |
92 |
p/st |
|
ex853690 85 |
94 |
p/st |
|
ex854449 93 |
10 |
p/st |
|
ex853690 85 |
97 |
p/st |
|
ex853710 91 |
30 |
p/st |
|
ex853710 99 |
92 |
p/st |
|
ex853710 99 |
93 |
p/st |
|
ex853710 99 |
94 |
p/st |
|
ex854370 90 |
20 |
p/st |
|
ex853710 99 |
97 |
p/st |
|
ex853890 99 |
92 |
p/st |
|
ex854370 90 |
30 |
p/st |
|
ex854370 90 |
35 |
p/st |
|
ex854370 90 |
40 |
p/st |
|
ex854370 90 |
45 |
p/st |
|
ex854370 90 |
55 |
p/st |
|
ex854370 90 |
60 |
p/st |
|
ex854370 90 |
65 |
p/st |
|
ex854370 90 |
80 |
p/st |
|
ex854370 90 |
85 |
p/st |
|
ex854370 90 |
95 |
p/st |
|
ex854390 00 |
20 |
p/st |
|
ex854390 00 |
30 |
p/st |
|
ex854390 00 |
40 |
p/st |
|
ex854442 90 |
10 |
p/st |
|
ex854519 00 |
20 |
p/st |
|
ex854710 00 |
10 |
p/st |
|
ex854890 90 |
41 |
p/st |
|
ex854890 90 |
43 |
p/st |
|
ex854890 90 |
47 |
p/st |
|
ex854890 90 |
48 |
p/st |
|
ex854890 90 |
49 |
p/st |
|
ex854890 90 |
50 |
p/st |
|
ex870830 91 |
10 |
p/st |
|
ex870899 97 |
20 |
p/st |
|
ex880330 00 |
50 |
p/st |
|
ex900190 00 |
35 |
p/st |
|
ex900190 00 |
45 |
p/st |
|
ex900190 00 |
75 |
p/st |
|
ex900290 00 |
20 |
p/st |
|
ex900290 00 |
30 |
p/st |
|
ex900290 00 |
40 |
p/st |
|
ex901290 90 |
10 |
p/st |
|
ex901320 00 |
10 |
p/st |
|
ex901320 00 |
20 |
p/st |
|
ex901320 00 |
30 |
p/st |
|
ex901410 00 |
30 |
p/st |
|
ex902290 00 |
10 |
p/st |
|
ex902580 40 |
30 |
p/st |
|
ex902910 00 |
20 |
p/st |
|
ex903180 34 |
30 |
p/st |
|
ex903180 38 |
10 |
p/st |
|
ex903180 38 |
20 |
p/st |
|
ex903190 85 |
20 |
p/st |
|
ex903289 00 |
20 |
p/st |
|
ex903289 00 |
30 |
p/st |
|
ex903289 00 |
40 |
p/st |
|
ex940190 80 |
10 |
p/st |
|
ex940190 80 |
20 |
p/st |
|
ex940190 80 |
30 |
p/st |
|
ex940190 80 |
40 |
p/st |
|
ex940540 35 |
10 |
p/st |
|
ex940540 39 |
10 |
p/st |
|
ex940540 39 |
20 |
p/st |
|
ex940540 39 |
50 |
p/st |
|
ex940540 99 |
3 |
p/st |
|
ex940540 99 |
6 |
p/st |
|
ex950300 75 |
10 |
p/st |
|
ex950300 95 |
10 |
p/st |
|
ex391990 00 |
36 |
Square meter (m2) |
|
ex391990 00 |
44 |
m2 |
|
ex392049 10 |
95 |
m2 |
|
ex392190 60 |
95 |
m2 |
|
ex560311 10 |
10 |
m2 |
|
ex560311 10 |
20 |
m2 |
|
ex560311 90 |
10 |
m2 |
|
ex560311 90 |
20 |
m2 |
|
ex560312 10 |
10 |
m2 |
|
ex560312 90 |
10 |
m2 |
|
ex560312 90 |
50 |
m2 |
|
ex560312 90 |
60 |
m2 |
|
ex560312 90 |
70 |
m2 |
|
ex560313 10 |
10 |
m2 |
|
ex560313 10 |
20 |
m2 |
|
ex560313 90 |
60 |
m2 |
|
ex560313 90 |
70 |
m2 |
|
ex560314 10 |
10 |
m2 |
|
ex560391 10 |
10 |
m2 |
|
ex560391 90 |
10 |
m2 |
|
ex560392 10 |
10 |
m2 |
|
ex560392 90 |
10 |
m2 |
|
ex560392 90 |
40 |
m2 |
|
ex560392 90 |
80 |
m2 |
|
ex560393 90 |
10 |
m2 |
|
ex560393 90 |
50 |
m2 |
|
ex382490 97 |
90 |
Cubic Metre (m3) |
|
ex390110 90 |
20 |
m3 |
|
ex390120 90 |
10 |
m3 |
|
ex390210 00 |
50 |
m3 |
|
ex390311 00 |
10 |
m3 |
|
ex390390 90 |
10 |
m3 |
|
ex390740 00 |
50 |
m3 |
|
ex390740 00 |
60 |
m3 |
|
ex390760 80 |
40 |
m3 |
|
ex392020 80 |
95 |
m3 |
|
ex540249 00 |
70 |
Metre (m) |
|
ex321519 00 |
20 |
Litre (l) |
( 1 ) Council Regulation (EU) No 1344/2011 of 19 December 2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products and repealing Regulation (EC) No 1255/96 (OJ L 349, 31.12.2011, p. 1).
( 2 ) Council Regulation (EU) No 1220/2012 of 3 December 2012 on trade related measures to guarantee the supply of certain fishery products to Union processors from 2013 to 2015, amending Regulations (EC) No 104/2000 and (EU) No 1344/2011 (OJ L 349, 19.12.2012, p. 4).
( 3 ) Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1).