EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 52012XC1215(02)
Communication from the Commission amending the Communication from the Commission Guidelines on certain State aid measures in the context of the greenhouse gas emission allowance trading scheme post-2012 Text with EEA relevance
Communication from the Commission amending the Communication from the Commission Guidelines on certain State aid measures in the context of the greenhouse gas emission allowance trading scheme post-2012 Text with EEA relevance
Communication from the Commission amending the Communication from the Commission Guidelines on certain State aid measures in the context of the greenhouse gas emission allowance trading scheme post-2012 Text with EEA relevance
OJ C 387, 15.12.2012, p. 5–13
(BG, ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
15.12.2012 |
EN |
Official Journal of the European Union |
C 387/5 |
Communication from the Commission amending the Communication from the Commission Guidelines on certain State aid measures in the context of the greenhouse gas emission allowance trading scheme post-2012
(Text with EEA relevance)
2012/C 387/06
In the definition of the ‘fall-back electricity consumption efficiency benchmark’ (Annex I of the Guidelines), 80 % will be added. It will read as follows:
‘— |
“fall back electricity consumption efficiency benchmark”, 80 % of baseline electricity consumption. It corresponds to the average reduction effort imposed by the application of the electricity consumption efficiency benchmarks (benchmark electricity consumption/ex ante electricity consumption). It is applied for all products and processes which fall within eligible sectors or subsectors, but which are not covered by the electricity consumption efficiency benchmarks set in Annex III.’ |
Annex III of the Communication ‘Electricity consumption efficiency benchmarks for products covered by the NACE codes in Annex II’ will be replaced by the following:
‘ANNEX III
Electricity consumption efficiency benchmarks for products covered by the NACE codes in Annex II
NACE4 |
Product benchmark (1) |
Benchmark value |
Benchmark unit |
Unit of production (2) |
Product definition (2) |
Processes covered by product BM (2) |
Relevant prodcom-code (Rev 1.1) |
Description |
||||||||||||||||||||
2742 |
Primary aluminium |
14,256 |
MWh/t product (AC consumption) |
Tonne of unwrought non-alloy liquid aluminium |
Unwrought non-alloy liquid aluminium from electrolysis |
Unwrought non-alloy liquid aluminium from electrolysis, including pollution control units, auxiliary processes and the cast house. In addition to the definitions of the product in Commission Decision 2011/278/EU the anode plant (pre-bake anodes) is included. In case anodes are provided from a stand-alone plant in Europe, this plant should not be compensated as already comprised in the BM. In case anodes are produced outside Europe, a correction may be applied. |
27421130 |
Unwrought non-alloy aluminium (excluding powders and flakes) |
||||||||||||||||||||
|
|
|
|
|
|
|
27421153 |
Unwrought aluminium alloys in primary form (excluding aluminium powders and flakes) |
||||||||||||||||||||
2742 |
Alumina (refining) |
0,225 |
MWh/t product |
Tonne of alumina |
|
All processes directly or indirectly linked to the production of alumina |
27421200 |
Aluminium oxide (excluding artificial corundum) |
||||||||||||||||||||
2710 |
Basic oxygen steel |
0,036 |
MWh/t product |
Tonne of crude (cast) steel |
|
Secondary metallurgy, refractories preheating, auxiliaries (in particular dedusting) and casting installations up to cut-off of crude steel products |
2710T122 |
Non-alloy steel produced by other processes than in electric furnaces |
||||||||||||||||||||
|
|
|
|
|
|
|
2710T132 |
Alloy steel other than stainless steel produced by other processes than in electric furnaces |
||||||||||||||||||||
|
|
|
|
|
|
|
2710T142 |
Stainless and heat resisting steel produced by other processes than in electric furnaces |
||||||||||||||||||||
2710 |
EAF carbon steel |
0,283 |
tCO2/t product |
Tonne of crude secondary steel ex-caster. |
Steel containing less than 8 % metallic alloying elements and tramp elements to such levels limiting the use to those applications where no high surface quality and processability is required. |
All processes directly or indirectly linked to the process units:
|
2710T121 |
Crude steel: non-alloy steel produced in electric furnaces |
||||||||||||||||||||
|
|
(Based on 10 % best average) |
|
|
|
|
2710T131 |
Crude steel: alloy steel other than stainless steel produced in electric furnaces |
||||||||||||||||||||
|
|
|
|
|
|
|
2710T141 |
Crude steel: stainless and heat resisting steel produced in electric furnaces |
||||||||||||||||||||
2710 |
EAF high alloy steel |
0,352 |
tCO2/t product |
Tonne of high alloy crude steel |
Steel containing 8 % or more metallic alloying elements or where high surface quality and processability is required |
All processes directly or indirectly linked to the process units:
|
2710T121 |
Crude steel: non-alloy steel produced in electric furnaces |
||||||||||||||||||||
|
|
(Based on 10 % best average) |
|
|
|
|
2710T131 |
Crude steel: alloy steel other than stainless steel produced in electric furnaces |
||||||||||||||||||||
|
|
|
|
|
|
|
2710T141 |
Crude steel: stainless and heat resisting steel produced in electric furnaces |
||||||||||||||||||||
2710 |
FeSi |
8,540 |
MWh/t product |
Tonne of final FeSi-75 |
FeSi-75 |
All processes directly linked to operation of the furnaces. Auxiliaries are not included. |
27102020/24101230 |
Ferro-silicon-75 % Si content |
||||||||||||||||||||
2710 |
FeMn HC |
2,760 |
MWh/t product |
Tonne of final High Carbon FeMn |
High Carbon FeMn |
All processes directly linked to the furnaces. Auxiliary processes are not included. |
27102010 |
Ferro-manganese (in accordance with BREF) |
||||||||||||||||||||
2710 |
SiMn |
3,850 |
MWh/t product |
Tonne of final SiMn |
Silico-manganese of different carbon content, including SiMn, Low Carbon SiMn, Very Low Carbon SiMn |
All processes directly linked to the operation of the furnaces. Auxiliary processes are not included. |
27102030 |
Silico-manganese excluding FeSiMn |
||||||||||||||||||||
2413 |
Cl2 |
2,461 |
MWh/t product |
Tonne of chlorine |
Chlorine |
All processes directly or indirectly linked to the electrolysis unit, including auxiliaries like motors |
24131111 |
Chlorine |
||||||||||||||||||||
2413 |
Si metal |
11,870 |
MWh/t product |
Tonne of Si metal |
Silicon with a grade 90-99,99 % |
All processes directly linked to the furnaces. Auxiliary processes are not included. |
24131155 |
Silicon containing by weight < 99,99 % of silicon |
||||||||||||||||||||
2413 |
Hyperpure polysilicon |
60,000 |
MWh/t product |
Tonne of hyperpure Si metal |
Silicon with a grade > 99,99 % |
All processes directly or indirectly linked to the furnace, including auxiliaries |
24131153 |
Silicon containing by weight ≥ 99,99 % of silicon |
||||||||||||||||||||
2413 |
SiC |
6,200 |
MWh/t product |
Tonne of 100 % SiC |
Silicon carbide with 100 % purity |
All processes directly or indirectly linked to the furnace, including auxiliaries |
24135450 |
Carbides whether or not chemically defined |
||||||||||||||||||||
2414 |
High value Chemicals |
0,702 |
tCO2/t product |
Tonne of high value chemical (HVC) (tonne of acetylene, ethylene, propylene, butadiene, benzene and hydrogen) |
Mix of high value chemicals (HVC) expressed as total mass of acetylene, ethylene, propylene, butadiene, benzene and hydrogen excluding HVC from supplemental feed (hydrogen, ethylene, other HVC) with an ethylene content in the total product mix of at least 30 mass-percent and a content of HVC, fuel gas, butenes and liquid hydrocarbons of together at least 50 mass-percent of the total product mix. |
All processes directly or indirectly linked to the production of high value chemicals as purified product or intermediate product with concentrated content of the respective HVC in the lowest tradable form (raw C4, unhydrogenated pygas) are included except C4 extraction (butadiene plant), C4-hydrogenation, hydrotreating of pyrolysis gasoline and aromatics extraction and logistics/storage for daily operation. |
Several prodcom-codes under NACE 2414 |
|
||||||||||||||||||||
|
|
|
|
|
|
|
24141120 |
Saturated acyclic hydrocarbons |
||||||||||||||||||||
|
|
|
|
|
|
|
24141130 |
Unsaturated acyclic hydrocarbons: ethylene |
||||||||||||||||||||
|
|
|
|
|
|
|
24141140 |
Unsaturated acyclic hydrocarbons; propene (propylene) |
||||||||||||||||||||
|
|
|
|
|
|
|
24141150 |
Unsaturated acyclic hydrocarbons; butene (butylene) and isomers thereof |
||||||||||||||||||||
|
|
|
|
|
|
|
24141160 |
Unsaturated acyclic hydrocarbons; buta-1.3-diene and isoprene |
||||||||||||||||||||
|
|
|
|
|
|
|
24141190 |
Unsaturated acyclic hydrocarbons (excluding ethylene, propene-butene, buta-1.3-diene and isoprene) |
||||||||||||||||||||
|
|
|
|
|
|
|
24/20141223 |
Benzene |
||||||||||||||||||||
2414 |
Aromatics |
0,030 |
tCO2/t product |
CO2 weighted tonne |
Mix of aromatics expressed as CO2 weighted tonne (CWT) |
All processes directly or indirectly linked to aromatics sub-units:
|
Several prodcom-codes under NACE 2414. See guidance document 9 for the direct emissions for the full list. |
|
||||||||||||||||||||
2414 |
Black carbon |
1,954 |
tCO2/t product |
Tonne of furnace carbon black (saleable unit, > 96 %) |
Furnace carbon black. Gas and lampblack products are not covered by this benchmark. |
All processes directly or indirectly linked to the production of furnace carbon black as well as finishing, packaging and flaring are included. |
24131130 |
Carbon (carbon blacks and other forms of carbon, n.e.c.) |
||||||||||||||||||||
2414 |
Styrene |
0,527 |
tCO2/t product |
Tonne of styrene (saleable product) |
Styrene monomer (vinyl benzene, CAS number: 100-42-5) |
All processes directly or indirectly linked to the production of:
|
24141250 |
Styrene |
||||||||||||||||||||
2414 |
Ethylene oxide/ethylene glycols EO/EG |
0,512 |
tCO2/t product |
Tonne of EO-equivalents (EOE), defined as the amount of EO (in mass) that is embedded in one mass unit of any of the specific glycols. |
The ethylene oxide/ethylene glycol benchmark covers the products:
The total amount of products is expressed in terms of EO-equivalents (EOE), which are defined as the amount of EO (in mass) that is embedded in one mass unit of the specific glycol. |
All processes directly or indirectly linked to the process units EO production, EO purification and glycol section are included. |
24146373 |
Oxirane (ethylene oxide) |
||||||||||||||||||||
|
|
|
|
|
|
|
24142310 |
Ethylene glycol (ethanediol) |
||||||||||||||||||||
|
|
|
|
|
|
|
24146333 |
2,2-Oxydiethanol (diethylene glycol; digol) |
||||||||||||||||||||
2743 |
Zinc electrolysis |
4,000 |
MWh/t product |
Tonne of zinc |
Primary zinc |
All processed directly or indirectly linked to the zinc elctrolysis unit including auxiliaries |
27431230 |
Unwrought non-alloy zinc (excluding zinc dust, powders and flakes) |
||||||||||||||||||||
|
|
|
|
|
|
|
2743125 |
Unwrought zinc alloys (excluding zinc dust, powders and flakes) |
||||||||||||||||||||
2415 |
Ammonia |
1,619 |
tCO2/t product |
Tonne of ammonia produced as saleable (net) production and 100 % purity. |
Ammonia (NH3), to be recorded in tons produced |
All processes directly or indirectly linked to the production of the ammonia and the intermediate product hydrogen are included. |
24151075 |
Anhydrous ammonia |
Products for which inter-exchangeability of electricity and fuels was established in Annex 1(2) of Decision 2011/278/EU (3)
Decision 2011/278/EU in Annex I established that in respect of some production processes there is substitutability between fuel and electricity. For those products, it is not appropriate to set a benchmark on the basis of MWh/t of product. Instead, starting points are the specific greenhouse gases emission curves derived for the direct emissions. For those processes, the product benchmarks were determined on the basis of the sum of direct emissions (from energy and process emissions), as well as indirect emissions arising from the use of the inter-exchangeable part of the electricity.
In these cases, the factor ‘E’ in the formula for the calculation of the maximum aid amount as referred to in paragraph 27(a) of the Guidelines is to be replaced by the following term that converts a product benchmark as per Decision 2011/278/EU into an electricity consumption efficiency benchmark on the basis of an average European emission intensity factor of 0,465 tCO2/MWh:
Existing product BM from Annex I from Decision 2011/278/EU (in tCO2/t) × share of relevant indirect emissions (4) overthe baseline period (%)/0,465 (tCO2/MWh).
(1) For products shaded in light grey, interchangeability between electricity and fuels was established and the benchmark is provided in terms of tCO2.
(2) Production units, definitions and processes covered, which are shaded in dark grey, are based on Commission Decision 2011/278/EU of 27 April 2011 determining transitional Union-wide rules for harmonised free allocation of emission allowances pursuant to Article 10a of Directive 2003/87/EC.
(3) Commission Decision of 27 April 2011 on determining transitional Union-wide rules for harmonised free allocation pursuant to Article 10a of Directive 2003/87/EC, C(2011) 2772 final (OJ L 130, 17.5.2011, p. 1).
(4) “Share of relevant indirect emissions over the baseline period” means the quotient of
— |
the relevant indirect emissions and |
— |
the sum of total direct emissions and relevant indirect emissions |
as per Article 14 of Decision 2011/278/EU.’