Back to EUR-Lex homepage

EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search
You are here

Document 32020R1589

Commission Delegated Regulation (EU) 2020/1589 of 22 July 2020 amending Annex I to Regulation (EU) 2018/956 of the European Parliament and of the Council as regards the data on new heavy-duty vehicles to be monitored and reported by Member States and by manufacturers (Text with EEA relevance)

C/2020/4796

OJ L 360, 30.10.2020, p. 4–7 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

Legal status of the document In force

ELI: http://data.europa.eu/eli/reg_del/2020/1589/oj

Date of document:
22/07/2020; Date of adoption
Date of effect:
19/11/2020; Entry into force Date pub. +20 See Art 2
Date of end of validity:
No end date
Author:
European Commission, Directorate-General for Climate Action
Responsible body:
CLIMA
Form:
Delegated regulation
Additional information:
EEA relevance
Treaty:
Treaty on the Functioning of the European Union
Legal basis:
Link
Link
Link
Select all documents mentioning this document
Modifies:
Relation Act Comment Subdivision concerned From To
Modifies 32018R0956 Addition annex I part A point (g) 19/11/2020
Modifies 32018R0956 Addition annex I part A point (h) 19/11/2020
Modifies 32018R0956 Addition annex I part A point (i) 19/11/2020
Modifies 32018R0956 Addition annex I part A point (j) 19/11/2020
Modifies 32018R0956 Addition annex I part A point (k) 19/11/2020
Modifies 32018R0956 Addition annex I part A point (l) 19/11/2020
Modifies 32018R0956 Addition annex I part A point (m) 19/11/2020
Modifies 32018R0956 Addition annex I part A point (n) 19/11/2020
Modifies 32018R0956 Addition annex I part B point 2 point 101 19/11/2020
Modifies 32018R0956 Replacement annex I part B point 2 point 24 19/11/2020
Modifies 32018R0956 Replacement annex I part B point 2 point 25 19/11/2020
Modifies 32018R0956 Replacement annex I part B point 2 point 32 19/11/2020
Modifies 32018R0956 Replacement annex I part B point 2 point 33 19/11/2020
Modifies 32018R0956 Replacement annex I part B point 2 point 39 19/11/2020
Modifies 32018R0956 Replacement annex I part B point 2 point 40 19/11/2020
Instruments cited:
Link

30.10.2020   

EN

Official Journal of the European Union

L 360/4

COMMISSION DELEGATED REGULATION (EU) 2020/1589

of 22 July 2020

amending Annex I to Regulation (EU) 2018/956 of the European Parliament and of the Council as regards the data on new heavy-duty vehicles to be monitored and reported by Member States and by manufacturers

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) 2018/956 of the European Parliament and of the Council of 28 June 2018 on the monitoring and reporting of CO2 emissions from and fuel consumption of new heavy-duty vehicles (1), and in particular points (a) and (b) of Article 11(1) thereof,

Whereas:

(1)

Part A of Annex I to Regulation (EU) 2018/956 specifies the data to be monitored and reported by the Member States relating to new heavy-duty vehicles registered for the first time in the Union.

(2)

In order to facilitate the matching of the data reported for each heavy-duty vehicle by Member States with those reported by manufacturers, Member States should report additional parameters related to the technical specifications of the vehicles.

(3)

To allow for verification of the quality of the data reported by manufacturers of heavy-duty vehicles, Member States should also report the imprint of the cryptographic hash of the manufacturer’s records file included in the certificate of conformity of the vehicle.

(4)

Part B of Annex I to Regulation (EU) 2018/956 specifies in its point 2 the data to be monitored and reported by manufacturers of each new heavy-duty vehicle.

(5)

To ensure uniform reporting of information on manufacturers of components, separate technical units or systems, references to Commission Regulation (EU) 2017/2400 (2) should be added.

(6)

To allow the Commission to verify the quality of the data reported by manufacturers concerning the CO2 emissions and fuel consumption of the engine, manufacturers should also report the type-approval number of the engine.

(7)

Annex I to Regulation (EU) 2018/956 should therefore be amended accordingly,

HAS ADOPTED THIS REGULATION:

Article 1

Annex I to Regulation (EU) 2018/956 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 22 July 2020.

For the Commission

The President

Ursula VON DER LEYEN

(1)  OJ L 173, 9.7.2018, p. 1.

(2)  Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (OJ L 349, 29.12.2017, p. 1).

ANNEX

Annex I to Regulation (EU) 2018/956 is amended as follows:

(1)

Part A is amended as follows:

(a)

the following points (g) to (n) are added:

‘(g)

for vehicles registereduntil 30 June 2021 where available and for vehicles registered from 1 July 2021 in all cases, the stage of completion, as indicated in the chosen model of the certificate of conformity in accordance with point 2 of Annex IX to Directive 2007/46/EC;

(h)

the vehicle category as specified in entry 0.4 of the certificate of conformity;

(i)

for vehicles registered until 31 December 2020 where available and for vehicles registered from 1 January 2021 in all cases, the number of axles, as specified in entry 1 of the certificate of conformity;

(j)

the technically permissible maximum laden mass, as specified in entry 16.1 of the certificate of conformity;

(k)

for vehicles registered until 31 December 2021 where available and for vehicles registered from 1 January 2022 in all cases, the imprint of the cryptographic hash of the manufacturer’s records file as specified in entry 49.1 of the certificate of conformity; for vehicles registered until 30 June 2025 Member States may report only the first 8 characters of the cryptographic hash;

(l)

for vehicles registered until 30 June 2021 where available and for vehicles registered from 1 July 2021 in all cases, the specific CO2 emissions as specified in entry 49.5 of the certificate of conformity;

(m)

for vehicles registered until 30 June 2021 where available and for vehicles registered from 1 July 2021 in all cases, the average payload value as specified in entry 49.6 of the certificate of conformity;

(n)

the date of registration.’;

(2)

in Part B, point 2 is amended as follows for vehicles reported as from 2021 onwards:

(a)

entries 24 and 25 are replaced by the following:

No

Monitoring parameters

Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified

Description

‘24

Name and address of transmission manufacturer

Point 0.4 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VI to Regulation (EU) 2017/2400

Main transmission specifications’

25

Make (trade name of transmission manufacturer)

Point 0.1 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VI to Regulation (EU) 2017/2400

(b)

entries 32 and 33 are replaced by the following:

No

Monitoring parameters

Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified

Description

‘32

Name and address of axle manufacturer

Point 0.4 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VII to Regulation (EU) 2017/2400

Main axle specifications’

33

Make (trade name of axle manufacturer)

Point 0.1 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex VII to Regulation (EU) 2017/2400

(c)

entries 39 and 40 are replaced by the following:

No

Monitoring parameters

Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified

Description

‘39

Name and address of tyre manufacturer

Point 1 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex X to Regulation (EU) 2017/2400

Main tyre specifications’

40

Make (trade name of tyre manufacturer)

Point 3 of the model of a certificate of a component, separate technical unit or system of Appendix 1 to Annex X to Regulation (EU) 2017/2400

(d)

the following entry 101 is added:

No

Monitoring parameters

Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified

Description

‘101

For vehicles with a date of simulation as of 1 July 2020, the type-approval number of the engine

Point 1.2.1. of addendum to Appendix 5, 6 or 7 to Annex I to Regulation (EU) No 582/2011, whichever is applicable

Engine specifications’
Top