Help Print this page 

Document 32014R0901

Title and reference
Commission Implementing Regulation (EU) No 901/2014 of 18 July 2014 implementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles Text with EEA relevance
  • In force
OJ L 249, 22.8.2014, p. 1–202 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

ELI: http://data.europa.eu/eli/reg_impl/2014/901/oj
Languages, formats and link to OJ
BG ES CS DA DE ET EL EN FR GA HR IT LV LT HU MT NL PL PT RO SK SL FI SV
HTML html BG html ES html CS html DA html DE html ET html EL html EN html FR html HR html IT html LV html LT html HU html MT html NL html PL html PT html RO html SK html SL html FI html SV
PDF pdf BG pdf ES pdf CS pdf DA pdf DE pdf ET pdf EL pdf EN pdf FR pdf HR pdf IT pdf LV pdf LT pdf HU pdf MT pdf NL pdf PL pdf PT pdf RO pdf SK pdf SL pdf FI pdf SV
Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal Display Official Journal
 To see if this document has been published in an e-OJ with legal value, click on the icon above (For OJs published before 1st July 2013, only the paper version has legal value).
Multilingual display
Dates
  • Date of document: 18/07/2014
  • Date of effect: 11/09/2014; Entry into force Date pub. +20 See Art 13
  • Date of effect: 01/01/2016; Application See Art 13
  • Date of end of validity: 31/12/9999
Miscellaneous information
  • Author: European Commission
  • Form: Implementing regulation
  • Additional information: EEA relevance
Relationship between documents
  • Treaty: Treaty on the Functioning of the European Union
  • Legal basis:
    32013R0168 - A22P7
    32013R0168 - A27P4
    32013R0168 - A29P4
    32013R0168 - A30P2
    32013R0168 - A30P3
    32013R0168 - A30P6
    32013R0168 - A32P1
    32013R0168 - A38P2
    32013R0168 - A39P3
    32013R0168 - A40P4
    32013R0168 - A50P2
    32013R0168 - A51P3
    32013R0168 - A57P8
    32013R0168 - A72
  • Select all documents based on this document
  • Select all legislative procedures based on this document
  • Select all documents mentioning this document
  • Amended by:
  • Relation Act Comment Subdivision concerned From To
    Corrected by 32014R0901R(01)
    Amended by 32016R1825 Replacement Annex IV APP 1 SECTION 2 Text 16/10/2016
    Amended by 32016R1825 Addition Annex VIII paragraph 2.2.1.10.14 16/10/2016
    Amended by 32016R1825 Replacement Annex VI APP 2 FOOTNOTE Text 16/10/2016
    Amended by 32016R1825 Replacement Annex V paragraph 3.2.8 16/10/2016
    Amended by 32016R1825 Replacement Annex I FOOTNOTE 24 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 20a 16/10/2016
    Amended by 32016R1825 Replacement Annex IV APP 1 16/10/2016
    Amended by 32016R1825 A Annex IV FOOTNOTE (p) 16/10/2016
    Amended by 32016R1825 A Annex IV APP 1 SECTION 2 paragraph 4.0.2 16/10/2016
    Amended by 32016R1825 A Annex IV APP 1 SECTION 2 paragraph 4.0.2.2 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 13a 16/10/2016
    Amended by 32016R1825 Replacement Annex VIII paragraph 2.2.1.10.12 16/10/2016
    Amended by 32016R1825 Replacement Annex VIII paragraph 2.2.1.10.11 TABL 5-14 16/10/2016
    Amended by 32016R1825 Addition Annex IV APP 1 SECTION 2 paragraph 4.0.6 16/10/2016
    Amended by 32016R1825 A Annex I APP 8 Text 16/10/2016
    Amended by 32016R1825 Replacement Annex VI APP 2 SECTION III Text 16/10/2016
    Amended by 32016R1825 Replacement Annex VIII paragraph 2.2.1.10.9 TABL 5-13 16/10/2016
    Amended by 32016R1825 Replacement Annex I APP 7 Text 16/10/2016
    Amended by 32016R1825 Replacement Annex VII paragraph 5 16/10/2016
    Amended by 32016R1825 Addition Annex VI APP 4 SECTION II paragraph 4a 16/10/2016
    Amended by 32016R1825 Replacement Annex VI APP 5 SECTION II paragraph 5 16/10/2016
    Amended by 32016R1825 Addition Annex VI APP 5 SECTION II paragraph 4a 16/10/2016
    Amended by 32016R1825 Replacement Annex IV APP 2 Text 16/10/2016
    Amended by 32016R1825 Replacement Annex IV FOOTNOTE (o) 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 8 Text 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 11b 16/10/2016
    Amended by 32016R1825 Replacement Annex I APP 24 16/10/2016
    Amended by 32016R1825 A Annex I APP 7 Text 16/10/2016
    Amended by 32016R1825 Replacement Annex IV APP 1 SECTION 2 paragraph 3.2.15.1 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 11a 16/10/2016
    Amended by 32016R1825 A Annex IV APP 1 SECTION 2 paragraph 4.0.2.1 16/10/2016
    Amended by 32016R1825 Replacement Annex V paragraph 3.1.6 16/10/2016
    Amended by 32016R1825 Replacement Annex VIII paragraph 2.2.1.8.7 16/10/2016
    Amended by 32016R1825 Replacement Annex I FOOTNOTE 16 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 9a 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 9b 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 4 Text 16/10/2016
    Amended by 32016R1825 Addition Annex VI APP 5 SECTION II paragraph 4a.1 16/10/2016
    Amended by 32016R1825 Replacement Annex VI APP 2 SECTION III paragraph 4.1 16/10/2016
    Amended by 32016R1825 Replacement Annex I APP 3 Text 16/10/2016
    Amended by 32016R1825 Addition Annex IV FOOTNOTE (u) 16/10/2016
    Amended by 32016R1825 A Annex IV FOOTNOTE (s) 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 3 Text 16/10/2016
    Amended by 32016R1825 Replacement Annex I APP 6 Text 16/10/2016
    Amended by 32016R1825 Addition Annex I P. B paragraph 2.2 TABL 1 TEXT 16/10/2016
    Amended by 32016R1825 Addition Annex VI APP 4 SECTION II paragraph 4a.1 16/10/2016
    Amended by 32016R1825 A Annex VII paragraph 4 TABL 1 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 6 Text 16/10/2016
    Amended by 32016R1825 Replacement Annex VIII paragraph 2.2.1.8.6 16/10/2016
    Amended by 32016R1825 Addition Annex I APP Text 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 5a 16/10/2016
    Amended by 32016R1825 Replacement Annex VI APP 5 SECTION II paragraph 6 16/10/2016
    Amended by 32016R1825 Replacement Annex IV APP 2 paragraph 0.3 16/10/2016
    Amended by 32016R1825 Replacement Annex IV APP 1 SECTION 2 Text 16/10/2016
    Amended by 32016R1825 A Annex IV FOOTNOTE (n) 16/10/2016
    Amended by 32016R1825 Replacement Annex VIII paragraph 2.2.1.3.3 16/10/2016
    Amended by 32016R1825 Replacement Annex V APP 1 paragraph 5 16/10/2016
    Amended by 32016R1825 Replacement Annex VIII paragraph 2.2.1.10.13 16/10/2016
    Amended by 32016R1825 A Annex I APP 4 Text 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 8a 16/10/2016
    Amended by 32016R1825 Replacement Annex I APP 8 Text 16/10/2016
    Amended by 32016R1825 Replacement Annex IV APP 1 SECTION 2 paragraph 4.0.1 16/10/2016
    Amended by 32016R1825 Addition Annex IV APP 1 SECTION 2 paragraph 4.0.6.3 16/10/2016
    Amended by 32016R1825 Addition Annex I APP 7 Text 16/10/2016
    Amended by 32016R1825 Addition Annex I P. B paragraph 2.8 TABL TEXT 16/10/2016
    Amended by 32016R1825 Replacement Annex VI APP 1 SECTION III paragraph 2.1 16/10/2016
    Amended by 32016R1825 Addition Annex IV FOOTNOTE (3r) 16/10/2016
    Amended by 32016R1825 Replacement Annex IV FOOTNOTE 9 16/10/2016
  • All consolidated versions:
    01/09/2017
    16/10/2016
  • Instruments cited:
    32002L0024
    32014R0003
  • Display the Official Journal containing the document
Text

22.8.2014   

EN

Official Journal of the European Union

L 249/1


COMMISSION IMPLEMENTING REGULATION (EU) No 901/2014

of 18 July 2014

implementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (1), and in particular Articles 22(7), 27(4), 29(4), 30(2), 30(3), 30(6), 32(1), 38(2), 39(3), 40(4), 50(2), 51(3), 57(8) and Article 72 thereof,

Whereas:

(1)

In the interest of clarity, predictability, rationality and simplification and in order to reduce the burden on vehicle manufacturers, this Regulation should, being based on existing practice, further simplify and standardise the documents used for type-approval procedures.

(2)

New technologies have been introduced in vehicles (e.g. electric engines or the application of Euro emission levels) since the templates used for type-approval procedures were drawn up in Directive 2002/24/EC of the European Parliament and of the Council (2). The templates should be adapted as a result.

(3)

To indicate which procedure has been chosen by the manufacturer when applying for type-approval, a new template for an ‘information folder sheet’ should be introduced.

(4)

To ensure that vehicles are constructed so as to remain safe throughout a reasonable period of time, templates should be created for manufacturer’s statements regarding the endurance of functional safety-critical systems, parts and equipment, and vehicle structure integrity, in accordance with Regulation (EU) No 168/2013.

(5)

In order to ensure reasonable access for independent operators to vehicle repair information, including information relating to on-board diagnostic systems and their interaction with other vehicle systems, manufacturers shall provide unrestricted access to that information and submit proof of their compliance with that requirement to the approval authorities. A template for a corresponding manufacturer’s certificate should be laid down.

(6)

Three models of a certificate of conformity should be made available, corresponding to the type-approval procedures for complete, completed and incomplete vehicles.

(7)

To facilitate the conversion of the performance level of subcategories (L3e/L4e)-A2 to (L3e/L4e)-A3 and vice versa, a template for a corresponding manufacturer's statement to be attached to the information folder should be provided for. In addition, some new information and entries in the certificate of conformity should be added and the characteristics of a specific statutory plate for the subcategories concerned should be determined.

(8)

In accordance with Article 82(2) of Regulation 168/2013 manufacturers may request EU type-approval or national type-approval for new vehicle types under that Regulation already before the application day. In order to facilitate the early application of that Regulation, it should be allowed to use the template of the certificate of conformity set out in Annex IV to Directive 2002/24/EC until 31 December 2015 under the conditions set out in Article 5(2).

(9)

In order to simplify controls while reducing the administrative burden on manufacturers, the anti-tampering control plate should no longer be required and the relevant information it contained should be included on the statutory plate.

(10)

In order to simplify the most common EU type-approval certificate, a new model should be developed exclusively for EU whole-vehicle type-approval of a complete vehicle type, while for the other combinations of vehicle types; a different model of the EU whole-vehicle type-approval certificate should be established.

(11)

Where the manufacturer chooses the single-step type-approval procedure, a list of applicable requirements or acts with which the type of vehicle complies should be appended to the EU whole-vehicle type-approval certificate.

A template for an EU type-approval certificate should be established with regard to harmonise the different templates previously provided for in the separate Union directives for systems and components or separate technical units.

(12)

The numbering system of the EU type-approval certificates provided for under Annex V to Directive 2002/24/EC should be modified to reflect the new legal structure of the acts containing the type approval requirements with which conformity is certified.

(13)

To harmonise the presentation of the most relevant information in test reports, a minimum set of requirements for the format of the test reports should be established.

(14)

To easily identify the results of the tests carried out on the type-approved vehicle, a test result sheet containing a required minimum set of information should be appended to the EU type-approval certificate.

(15)

The list of parts or equipment which may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle or for its environmental performance should be established.

(16)

The template for a certificate authorising the placing on the market of parts or equipment which may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle or for its environmental performance should be established, together with a certificate numbering system.

(17)

The measures provided for in this Regulation are in accordance with the opinion of the Committee referred to in Article 73(1) of Regulation (EU) No 168/2013,

HAS ADOPTED THIS REGULATION:

Article 1

Subject matter

This Regulation provides for the implementing measures referred to in Article 72 of Regulation (EU) No 168/2013 to establish uniform conditions for the implementation of the administrative requirements for the approval of new two- or three-wheel vehicles and quadricycles, as well as systems, components and separate technical units designed and constructed for such vehicles. It also establishes the administrative requirements for placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems.

Article 2

Templates for the information document and for the information folder

Manufacturers applying for EU type-approval shall provide the information document and the information folder referred to in Article 27(1) and Article 27(2)(a) of Regulation (EU) No 168/2013 on the basis of the templates set out in Annex I to this Regulation.

Article 3

Templates for the manufacturer’s statements on endurance testing and vehicle structure integrity

Manufacturers applying for EU type-approval shall provide statements on endurance of functional safety-critical systems, parts and equipment referred to in Article 22(2) of Regulation (EU) No 168/2013 and on vehicle structure integrity as referred to in Annex XIX to Commission Delegated Regulation (EU) No 3/2014 (3) to that Regulation on the basis of the templates set out in Annex II to this Regulation.

Article 4

Templates for the manufacturer’s certificates providing proof of compliance to the type-approval authority on access to vehicle on-board diagnostics (OBD) and to vehicle repair and maintenance information

Manufacturers applying for EU type-approval shall provide the approval authority with a certificate on access to vehicle OBD and vehicle repair and maintenance information in accordance with Article 57(8) of Regulation (EU) No 168/2013 on the basis of the templates set out in Annex III to this Regulation.

Article 5

Templates for the certificates of conformity

1.   Manufacturers shall issue the certificate of conformity referred to in Article 38(1) of Regulation (EU) No 168/2013 in accordance with the templates set out in Annex IV to this Regulation.

2.   In accordance with Article 82(2) of Regulation (EU) 168/2013 allowing manufacturers to request type-approvals already under that Regulation as from the entry into force of this Implementing Regulation until 31 December 2015, manufacturers may use for vehicles of such newly approved types, alternatively to the template for the Certificate of Conformity laid down in Appendix 1 of Annex IV, the template for the Certificate of Conformity set out in Annex IV to Directive 2002/24/EC which must include in its entries No 04 ‘Vehicle category’ and No 50 ‘Remarks:’ the information and entries laid down in Appendix 2 of Annex IV.

Article 6

Models for the statutory plate and EU type-approval mark

Manufacturers shall issue the statutory plate and the EU type-approval mark referred to in Article 39(1) and (2) of Regulation (EU) No 168/2013 in accordance with the models set out in Annex V to this Regulation.

Article 7

Templates for the EU type-approval certificate

Approval authorities shall issue the EU type-approval certificates referred to in Article 30(1) of Regulation (EU) No 168/2013 on the basis of the templates set out in Annex VI to this Regulation.

Article 8

Numbering system of the EU type-approval certificate

Pursuant to Article 29(4) of Regulation (EU) No 168/2013, the EU type-approval certificates shall be numbered in accordance with the harmonised system set out in Annex VII to this Regulation.

Article 9

Template for the test results sheet

Approval authorities shall issue the test results sheet referred to in Article 30(3) of Regulation (EU) No 168/2013 on the basis of the template set out in Annex VIII to this Regulation.

Article 10

Format of test reports

The format of the test reports referred to in Article 32(1) of Regulation (EU) No 168/2013 shall comply with the general requirements set out in Annex VIII to this Regulation.

Article 11

List of parts or equipment which may pose a serious risk to the correct functioning of essential systems

The list of parts or equipment which may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle or for its environmental performance referred to in Article 50(2) of Regulation (EU) No 168/2013 is set out in Annex X to this Regulation.

Article 12

Template and numbering system for the certificate for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems

Approval authorities shall issue the certificate for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle or for its environmental performance referred to in Article 51(2) of Regulation (EU) No 168/2013 on the basis of the template and in accordance with the numbering system set out in Annex IX to this Regulation.

Article 13

Entry into force and application

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2016.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 18 July 2014.

For the Commission

The President

José Manuel BARROSO


(1)  OJ L 60, 2.3.2013, p. 52.

(2)  Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles and repealing Council Directive 92/61/EEC (OJ L 124, 9.5.2002, p. 1).

(3)  Commission Delegated Regulation (EU) No 3/2014 of 24 October 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to vehicle functional safety requirements for the approval of two- or three-wheel vehicles and quadricycles (OJ L 7, 10.1.2014, p. 1)


LIST OF ANNEXES

Annex Number

Annex Title

Page

I

Templates for the information document and information folder

6

II

Templates for the manufacturer’s statements on endurance testing and vehicle structure integrity

128

III

Templates for the manufacturer’s certificates providing proof of compliance to the type-approval authority on access to vehicle on-board diagnostics (OBD) and to vehicle repair and maintenance information

130

IV

Templates for the certificates of conformity

134

V

Models for the statutory plate and EU type-approval mark

149

VI

Templates for the EU type-approval certificate

158

VII

Numbering system of the EU type-approval certificate

175

VIII

Format of test reports and template for the test results sheet

179

IX

Template and numbering system for the certificate for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems

198

X

List of parts or equipment which may pose a serious risk to the correct functioning of essential systems

202

ANNEX I

Templates for the information document and information folder

LIST OF APPENDICES

Appendix Number

Appendix title

Page

1

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a tailpipe pollution-control system

59

2

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a crankcase and evaporative emissions system

62

3

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an on-board diagnostic (OBD) system

64

4

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a sound level system

68

5

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a propulsion unit performance system

70

6

Model information document relating to EU type-approval of a pollution-control device as a STU

72

7

Model information document relating to EU type-approval of a noise-abatement device as a STU

76

8

Model information document relating to EU type-approval of an exhaust (pollution-control device and noise-abatement device) as a STU

78

9

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a braking system

82

10

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of lighting and light-signalling devices system

85

11

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a roll-over protective structure (ROPS) system

87

12

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of tyres system

89

13

Model information document relating to EU type-approval of an audible warning device as a component

92

14

Model information document relating to EU type-approval of a non-glazing front windscreen as a component/STU

94

15

Model information document relating to EU type-approval of a windscreen washer device as a component/STU

96

16

Model information document relating to EU type-approval of a rearward visibility device as a component/STU

98

17

Model information document relating to EU type-approval of safety belts as a STU

100

18

Model information document relating to EU type-approval of a seating position (saddle/seat) as a component/STU)

102

19

Model information document relating to EU type-approval of a trailer coupling device as a STU

104

20

Model information document relating to EU type-approval of devices to prevent unauthorised use as a STU

106

21

Model information document relating to EU type-approval of passenger handholds as a STU

108

22

Model information document relating to EU type-approval of footrests as a STU

110

23

Model information document relating to EU type-approval of a side-car as a STU

111

24

Manufacturer’s declaration for vehicles capable of converting their performance level from subcategory (L3e/L4e)-A2 to (L3e/L4e)-A3 and vice-versa

120

25

Manufacturer’s declaration on powertrain tampering prevention measures (anti-tampering)

123

PART A

INFORMATION FOLDER

1.   General requirements

1.1.

When applying for EU type-approval for a vehicle, system, component or separate technical unit, the manufacturer shall provide, in accordance with Article 27 of Regulation (EU) No 168/2013, an information folder which shall contain the following:

1.1.1.

a list of contents;

1.1.2.

the information on the type-approval procedure chosen in accordance with Article 25(1) of Regulation (EU) No 168/2013, the template for which is set out in point 2 (information folder sheet);

1.1.3.

the information document as set out in Part B of this Annex;

1.1.4.

all relevant data, drawings, photographs and other information as required in the information document;

1.1.5.

the manufacturer’s statement on endurance of functional safety-critical systems, parts and equipment as referred to in Article 22(2) of Regulation (EU) No 168/2013 and set out in Annex II to this regulation;

1.1.6.

the manufacturer’s statement on vehicle structure integrity as referred to in Article 22(5) of Regulation (EU) No 168/2013 and in point 1.1.of Annex XIX to Commission Delegated Regulation (EU) No 3/2014 of 24 October 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to vehicle functional safety requirements for the approval of two- or three-wheel vehicles and quadricycles (1), as set out point 1.4. of Annex II to this regulation;

1.1.7.

the manufacturer’s certificate providing proof of compliance to the type-approval authority on access to vehicle on-board diagnostic (OBD) systems and to vehicle repair and maintenance information as referred to in Article 57(8) of Regulation (EU) No 168/2013 and set out in Annex III to this regulation;

1.1.8.

the manufacturer’s declaration of conversion of (L3e/L4e)-A2 to (L3e/L4e)-A3 motorcycle characteristics and vice versa as referred to in Article 25(8) of Regulation (EU) No 168/2013 and in point 4.2.6. of Annex III to Commission Delegated Regulation (EU) No 44/2014 of 21 November 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to the vehicle construction and general requirements for the approval of two- or three- wheel vehicles and quadricycles (2), as set out in Appendix 24 of this Annex;

1.1.9.

the manufacturer’s declaration on powertrain tampering prevention measures (anti-tampering) as referred to in Article 20(2) of Regulation (EU) No 168/2013 and in points 2.2., 2.6. and 5.2. of Annex II to Commission Delegated Regulation 44/2014 according to the models established in Appendix 25 of this Annex;

1.1.10.

any additional information requested by the approval authority as part of the approval procedure.

1.2.

Applications submitted on paper shall be in triplicate. Any drawings shall be to an appropriate scale and in sufficient detail on size A4 sheets or in a folder of A4 format. Photographs, if any, shall show sufficient detail.

1.3.

If the systems, components or separate technical units have electronic controls, information concerning their performance shall be provided.

2.   Template of the information folder sheet

Information

on the type-approval procedure chosen in accordance with Article 25(1) of Regulation (EU) No 168/2013

Information folder sheet

A duly completed version of this statement shall be included in the information folder.

The undersigned: [… (full name and position)]

Company name and address of the manufacturer: …

Name and address of the manufacturer’s representative (if any): …

Hereby applies for type-approval procedure(4):

(a)

step-by-step type-approval

(b)

single-step type-approval

(c)

mixed type-approval

Where procedures (a) or (c) are chosen, compliance with requirements as under (b) is declared for all systems, components and separate technical units.

Multi-stage type-approval chosen in accordance with Article 25(5) of Regulation (EU) No 168/2013: yes/no(4)

Information on the vehicle(s) to be filled in, if application is for EU whole-vehicle type-approval(3) :

0.1.

Make (trade name of the manufacturer): …

0.2.

Type(17): …

0.2.1.

Variant(s)(17): …

0.2.2.

Version(s)(17): …

0.2.3.

Commercial name(s) (if available): …

0.3.

Category, subcategory and sub-subcategory of vehicle(2): …

Information to be filled in, if application is for type-approval of a system/ component/separate technical unit(3)(4) :

0.7.

Make(s) (trade name(s) of manufacturer): …

0.8.

Type: …

0.8.1.

Commercial name(s) (if available): …

1.6.

Virtual and/or self-testing(3)

1.6.1.

Overview list with virtual and/or self-tested systems, components or separate technical units pursuant to point 6 of Annex III to Commission Delegated Regulation (EU) No 44/2014 below:

Overview table virtual and/or self-testing

Delegated act

Annex

Subject

Virtual and/or self-tested: yes/no(4)

Commission Delegated Regulation (EU) No 134/2014 (3)

IX

Testing procedures on maximum design vehicle speed

Self-testing: yes/no(4)

Commission Delegated Regulation (EU) No 3/2014

II

Audible warning devices

Self-testing: yes/no(4)

Commission Delegated Regulation (EU) No 3/2014

VIII

Driver-operated controls including identification of controls, tell-tales and indicators

Self-testing: yes/no(4)

Commission Delegated Regulation (EU) No 3/2014

IX

Installation of lighting and light- signalling devices

Virtual testing: yes/no(4)

Commission Delegated Regulation (EU) No 3/2014

X

Rearward visibility

Virtual testing: yes/no(4)

Commission Delegated Regulation (EU) No 3/2014

XIV

Installation of tyres

Virtual testing: yes/no(4)

Commission Delegated Regulation (EU) No 44/2014

XIV

Registration plate space

Self & Virtual testing: yes/no(4)

Commission Delegated Regulation (EU) No 44/2014

XVI

Stands

Self-testing: yes/no(4)

This Commission Implementing Regulation

VIII

Statutory plate and EU type-approval mark

Self-testing: yes/no(4)

1.6.2.

Detailed report on validation of virtual and/or self-testing added: yes/no(4)

Place: …

Date: …

Signature: …

Name and position in the company: …

PART B

INFORMATION DOCUMENT

1.   General requirements

1.1.   The information document shall have a reference number supplied by the applicant.

1.2.   Where the particulars appearing in the information document for vehicle approval have changed, the manufacturer shall submit revised pages to the approval authority showing clearly the nature of the change(s) and the date of re-issue.

1.3.   Type-approval numbers

1.3.1.

The manufacturer shall supply the information required by the following table in respect of the applicable subjects for the vehicle in Annex II to Regulation (EU) No 168/2013. All relevant approvals and test reports (if available) for each subject shall be included. However, information in respect of systems, components or separate technical units need not be given here so long as such information is included in the correspondent approval certificate.

Type-approval number and test report overview

Item number and subject

Type-approval number or test report number (6)

Date of issue of the type-approval or of its extension or of the test report

Member State or contracting party (4) issuing the type- approval (5) or technical service issuing the test report (6)

Reference to the regulatory act and its latest amendment

Variant(s)/ version(s

e.g.

B1 audible warning devices

 

 

 

 

 

 

 

 

 

 

 

Signed: …

Position in company: …

Date: …

2.   Content of the information document

All information documents shall contain the following:

2.1.   For a whole vehicle type-approval the manufacturer shall complete:

the matrix in point 2.3. to identify the versions and variants of the vehicle intended for type-approval;

a list of items applicable to the (sub-)category and to the technical characteristics of the vehicle from which content has been extracted, adhering to the numbering system of the total list set out in point 2.6.

2.2.   For a system, component or separate technical unit as listed in table 1 the manufacturer shall complete the applicable appendix to this Annex.

In addition to the Annexes mentioned in table 1, the systems, components and separate technical units shall comply with the following requirements:

arrangements for type-approval procedures (Annex III of Commission Delegated Regulation (EU) No 44/2014)

conformity of production (CoP) (Annex IV of Delegated Regulation (EU) No 44/2014)

access to repair and maintenance information (Annex XV of Delegated Regulation (EU) No 44/2014)

Table 1

Lists of systems, components and separate technical units which may be subject to an EU type-approval

LIST I — Environmental and propulsion unit performance requirements

Appendix

System or component/separate technical unit (STU)

Commission Delegated Regulation (EU) No 134/2014 Annex number

As amended by and/or at the stage of implementation

1

System: tailpipe pollution-control system

II, III, V, VI

 

2

System: crankcase and evaporative emissions

IV, V

 

3

System: environmental and functional on-board diagnostic (OBD)

VIII

(and Annex XII to Commission Delegated Regulation (EU) No 44/2014)

 

4

System: sound level

IX

 

5

System: propulsion unit performance

X

 

6

STU: pollution-control device

II, III, IV, V, VI

 

7

STU: noise-abatement device

IX

 

8

STU: exhaust device (pollution-control device and noise-abatement device)

II, III, V, VI, IX

 


LIST II — Vehicle functional safety requirements

Appendix

System or component/separate technical unit (STU)

Commission Delegated Regulation (EU) No 3/2014 Annex number

As amended by and/or at the stage of implementation

9

System: braking

III

 

10

System: installation of lighting and light-signalling devices

IX

 

11

System: Roll-over protective structure (ROPS)

XI

 

12

System: installation of tyres

XV

 

13

Component: audible warning device

II

 

14

Component/STU: non-glazing front windscreen

VII

 

15

Component/STU: windscreen washer device

VII

 

16

Component/STU: rearward visibility device

X

 

17

STU: safety belts

XII

 

18

Component/STU: seating position (saddle/seat)

XIII

 


LIST III — Vehicle construction and general type-approval requirements

Appendix

System or component/separate technical unit (STU)

Commission Delegated Regulation (EU) No 44/2014 Annex number

As amended by and/or at the stage of implementation

19

STU: trailer coupling device

V

 

20

STU: devices to prevent unauthorised use

VI

 

21

STU: passenger handholds

XIII

 

22

STU: footrests

XIII

 

23

STU: side-car

VIII, XI, XIII;

(and Annexes III, V, VII, IX, X, XII, XIII, XIV, XV, XVII and XIX to Commission Delegated Regulation (EU) No 3/2014)

 

2.3.   Matrix showing the combinations of the entries listed in point 2.6. within the versions and variants of the vehicle type

Variants and version matrix

Item No

All

Version 1

Version 2

Version 3

Version n

 

 

 

 

 

 

2.3.1.

A separate matrix shall be compiled for each variant within the type.

2.3.2.

Entries with no restrictions on their combination within a variant shall be listed in the column headed ‘All’.

2.3.3.

The above information may be presented in an alternative format or merged with the information supplied under point 2.6.

2.4.   Type-, variant- and version designations

2.4.1.   The manufacturer shall allocate an alphanumeric code to each vehicle type, variant and version, made up of Roman letters and/or Arabic numerals, which shall also be indicated in the certificate of conformity (see Annex IV) of the vehicle concerned.

The use of brackets and hyphens is permitted provided they do not replace a letter or a numeral.

2.4.2.   The whole code shall be designated: Type-Variant-Version or ‘TVV’.

2.4.3.   The TVV shall clearly and unequivocally identify a unique combination of technical features in relation to the criteria defined in Part B of this Annex.

2.4.4.   The same manufacturer may use the same code in order to define a vehicle type when the latter falls in two or more categories.

2.4.5.   The same manufacturer shall not use the same code in order to define a vehicle type for more than one type-approval within the same vehicle category.

2.4.6.   Number of characters for the TVV

2.4.6.1.

The number of characters shall not exceed:

a.

15 for the code of the vehicle type;

b.

25 for the code of one variant;

c.

35 for the code of one version.

2.4.6.2.

The complete alphanumeric ‘TVV’ shall not contain more than 75 characters.

2.4.6.3.

When the TVV is used as a whole, a space shall be left between the type, the variant and the version.

Example of such TVV: 159AF[… space]0054[… space]977K(BE).

2.5.   For those subjects referred to in Annex II to Regulation (EU) No 168/2013 whose approvals have been granted in accordance with the UNECE regulations referred to in Article 54 of Regulation (EU) 168/2013 (UNECE approvals), the manufacturer shall supply the information required in point 2.7. only if it is not already provided in the correspondent approval certificate and/or test report. However, the information referred to in the certificate of conformity (Annex IV) shall be supplied in any case.

2.6.   The manufacturer shall complete the applicable item numbers of the template set out in point 2.8. and submit this filled-out list to the approval authority that grants the type-approval, split into two separate documents. The applicable items marked with * shall remain with the approval authority that grants the type-approval and all other applicable items shall make part of the information folder. The Colum ‘(Sub) categories’ indicates to which sub-categories applies each particular entry (e.g. ‘L1e - L7e’ means that the entry applies to all categories and subcategories).

2.7.   The following type of data entries may be omitted in the information document under the condition that an appropriate technical drawing either as a paper document or a pdf-file is added to the information folder and on which these listed items are shown in a clear and readable way:

2.7.1.

Make (with the exemption of Item No 0.1);

2.7.2.

Type (with the exemption of Item No 0.2);

2.7.3.

Location / where;

2.7.4.

Working principle (with the exemption of Item No 3.2.1.2);

2.7.5.

Characteristics;

2.7.6.

Number of (with the exemption of Items No 1.3., 3.2.1.1. and 6.16.1.);

2.7.7.

Identification / part number;

2.7.8.

(Brief) / (Technical) description;

2.7.9.

Design;

2.7.10.

Schematic drawing / diagram;

2.7.11.

(Construction) materials used;

2.7.12.

Angles / inclination and other dimensions (height, length, width, distance) (with the exemption of Items No 2.2.1., 2.2.2., 2.2.3., 2.2.17., 7.6.1. and 7.6.2.);

2.7.13.

Tolerance;

2.7.14.

Reference mark;

2.7.15.

Size (with the exemption of point 6.18.1.1.1., 6.18.1.1.2. and 6.18.1.1.3.);

2.7.16.

Configuration;

2.8.   INFORMATION DOCUMENT DATA ENTRIES

Item No.

(Sub) categories

Detailed information

0.

 

GENERAL INFORMATION

A.

 

General information concerning vehicles

0.1.

L1e — L7e

Make (trade name of manufacturer): …

0.2.

L1e — L7e

Type(17) : …

0.2.1

L1e — L7e

Variant(s)(17): …

0.2.2

L1e — L7e

Version(s)(17): …

0.2.3.

L1e — L7e

Commercial name(s) (if available): …

0.3.

L1e — L7e

Category, subcategory and sub-subcategory of vehicle(2) : …

0.4.

L1e — L7e

Company name and address of manufacturer: …

0.4.1.

L1e — L7e

Name(s) and address(es) of assembly plants: …

0.4.2.

L1e — L7e

Name and address of manufacturer’s authorised representative, if any: …

0.5.

L1e — L7e

Manufacturer’s statutory plate(s): …

0.5.1.

L1e — L7e

Location of the manufacturer's statutory plate(15)(18): …

0.5.2.

L1e — L7e

Method of attachment: …

0.5.3.

L1e — L7e

Photographs and/or drawings of the statutory plate (completed example with dimensions): …

0.6.

L1e — L7e

Location of the vehicle identification number(15) : …

0.6.1.

L1e — L7e

Photographs and/or drawings of the locations of the vehicle identification number (completed example with dimensions): …

0.6.1.1.

L1e — L7e

The serial number of the type begins with: …

B.

 

General information concerning systems, components or separate technical units

0.7.

L1e — L7e

Make(s) (trade name(s) of manufacturer): …

0.8.

L1e — L7e

Type: …

0.8.1.

L1e — L7e

Commercial name(s) (if available): …

0.8.2.

L1e — L7e

Type-approval number(s) (if available): …

0.8.3.

L1e — L7e

Type-approval(s) issued on (date, if available): …

0.9.

L1e — L7e

Company name and address of manufacturer: …

0.9.1.

L1e — L7e

Name(s) and address(es) of assembly plants: …

0.9.2.

L1e — L7e

Name and address of manufacturer’s authorised representative, if any: …

0.10.

 

Vehicle(s) for which the system/separate technical unit is intended for(21) : …

0.10.1.

L1e — L7e

Type(17): …

0.10.2.

L1e — L7e

Variant(17): …

0.10.3.

L1e — L7e

Version(17): …

0.10.4.

L1e — L7e

Commercial name(s) (if available): …

0.10.5.

L1e — L7e

Category, subcategory and sub-subcategory of vehicle(2): …

0.11.

L1e — L7e

Type-approval marks for components and separate technical units(19) : …

0.11.1.

L1e — L7e

Method of attachment: …

0.11.2.

L1e — L7e

Photographs and/or drawings of the location of the type-approval mark (completed example with dimensions): …

C.

 

General information regarding conformity of production and access to repair and maintenance information

0.12.

 

Conformity of production

0.12.1.

L1e — L7e

Description of overall quality-assurance management systems.

0.13.

 

Access to repair and maintenance information

0.13.1.

L1e — L7e

Address of principal website for access to vehicle repair and maintenance information: …

0.13.2.

L1e — L7e

In the case of multi-stage type-approval, address of principal website for access to vehicle repair and maintenance information from manufacturer(s) at previous stage(s):

1.

 

GENERAL CONSTRUCTION CHARACTERISTICS

1.1.

L1e — L7e

Photographs and/or drawings of a representative vehicle: …

1.2.

L1e — L7e

Scale drawing of the whole vehicle: …

1.3.

L1e — L7e

Number of axles and wheels: …

1.3.1.

L1e — L7e

Axles with twinned wheels(23): …

1.3.2.

L1e — L7e

Powered axles(23): …

1.4.

L1e — L7e

Chassis (if any) (overall drawing): …

1.5.

L2e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C

Material used for the bodywork:

1.6.

L1e — L7e

Position and arrangement of the propulsion(s): …

1.7.

L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C

Hand of drive: left/right/centre(4): …

1.7.1.

L1e — L7e

Vehicle is equipped to be driven in right/left-hand traffic and in countries that use metric/metric and imperial units.(4): …

1.8.

 

Propulsion unit performance

1.8.1.

L3e, L4e, L5e, L7e-A, L7e-B2

Declared maximum vehicle speed: … km/h

1.8.2.

L1e, L2e, L6e, L7e-B1, L7e-C

Maximum design vehicle speed (22): … km/h and gear in which it is reached: …

1.8.3.

L1e — L7e

Maximum net power combustion engine: … kW at … min-1 at A/F ratio: …

1.8.4.

L1e — L7e

Maximum net torque combustion engine: … Nm at … min-1 at A/F ratio: …

1.8.5.

L1e — L7e

Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min-1

1.8.6.

L1e — L7e

Maximum continuous-rated torque electric motor: … Nm at … min-1

1.8.7.

L1e — L7e

Maximum continuous total power for propulsion(s): … kW at … min-1 at A/F ratio: …

1.8.8.

L1e — L7e

Maximum continuous total torque for propulsion(s): … Nm at … min-1at A/F ratio: …

1.8.9.

L1e — L7e

Maximum peak power for propulsion(s): … kW at … min-1at A/F ratio: …

2.

 

MASSES AND DIMENSIONS

(in kg and mm.) refer to drawings where applicable

2.1

 

Range of vehicle mass (overall)

2.1.1.

L1e — L7e

Mass in running order: … kg

2.1.1.1.

L1e — L7e

Distribution of mass in running order between the axles: … kg

2.1.2.

L1e — L7e

Actual mass: … kg

2.1.2.1.

L1e — L7e

Distribution of actual mass between the axles: … kg

2.1.3.

L1e — L7e

Technically permissible maximum laden mass: … kg

2.1.3.1.

L1e — L7e

Technically permissible maximum mass on front axle: … kg

2.1.3.2.

L1e — L7e

Technically permissible maximum mass on rear axle: … kg

2.1.3.3.

L4e

Technically permissible maximum mass on sidecar axle: … kg

2.1.4.

L1e — L7e

Maximum hill-starting ability at the maximum technically permissible mass declared by the manufacturer: … % slope

2.1.5.

L1e — L7e

Maximum pay mass declared by manufacturer: … kg

2.1.6.

L1e — L7e

Safe load carrying capacity of load platform declared by manufacturer: … kg

2.1.7.

L1e — L7e

Technically permissible maximum towable mass in case of (4): Braked: … kg Unbraked: … kg

2.1.7.1

L1e — L7e

Technically permissible maximum laden mass of the combination: … kg

2.1.7.2.

L1e — L7e

Technically permissible maximum mass at the coupling point: … kg

2.1.8.

L1e — L7e

Mass of the optional equipment: … kg

2.1.9.

L1e — L7e

Mass of the superstructure: … kg

2.1.10.

L1e — L7e

Mass of the propulsion battery: … kg

2.1.11.

L2e, L4e, L5e, L6e, L7e

Mass of the doors: … kg

2.1.12.

L2e-U, L5e-B, L6e-BU, L7e-CU

Mass of the machines or equipment installed on the load platform area: … kg

2.1.13.

L1e — L7e

Mass of the gaseous fuel system as well as storage tanks for gaseous fuel: … kg

2.1.14.

L1e — L7e

Mass of the storage tanks to store compressed air: … kg

2.2.

 

Range of vehicle dimensions (overall)

2.2.1.

L1e — L7e

Length: … mm

2.2.2.

L1e — L7e

Width: … mm

2.2.3.

L1e — L7e

Height: … mm

2.2.4.

L1e — L7e

Wheelbase: … mm

2.2.4.1.

L4e

Wheelbase sidecar(28): … mm

2.2.5.

 

Track width

2.2.5.1.

L1e — L7e if equipped with twinned wheels

L2e, L4e, L5e, L6e, L7e

Track width front: … mm.

2.2.5.2.

L1e — L7e if equipped with twinned wheels

Track width rear: … mm.

2.2.5.3.

L2e, L4e, L5e, L6e, L7e

Track width sidecar: … mm.

2.2.6.

L7e-B

Front overhang: … mm.

2.2.7.

L7e-B

Rear overhang: … mm.

2.2.8.

 

Load platform dimensions

2.2.8.1.

L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU

Length of the load platform: … mm

2.2.8.2.

L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU

Width of load platform: … mm

2.2.8.3.

L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU

Height of load platform: … mm

2.2.9.

 

Centre of gravity

2.2.9.1.

L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU

Location of the centre of gravity forward of the rear axle Lcg: … mm.

2.2.9.2.

L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU

Location of the centre of gravity above the ground plane Hcg: … mm.

2.2.9.3.

L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CU

Location centre of gravity of loaded platform forward of the rear axle LcgLP: … mm.

2.2.10.

 

Miscellaneous dimensions

2.2.10.1.

L7e-B2

Approach angle(11): … degrees.

2.2.10.2.

L7e-B2

Departure angle(11): … degrees.

2.2.10.3.

L7e-B2

Ramp angle(11): … degrees.

2.2.10.4.

L7e-B2

Ground clearance under the front axle(11): … mm.

2.2.10.5.

L7e-B2

Ground clearance under the rear axle(11): … mm.

2.2.10.6.

L3e-AxE (x=1, 2 or 3), L3e-AxT (x=1, 2 or 3)

L7e-B

Ground clearance between the axles(11): … mm.

2.2.10.7.

L7e-B

Wheelbase to ground clearance ratio … [no unit]

2.2.10.8.

L7e-B2

Static stability coefficient — Kst: … [no unit]

2.2.10.9.

L3e-AxE, L3e-AxT

Seat height: … mm

2.2.10.10.

L3e-AxE, L3e-AxT

Ground clearance: … mm

3.

 

GENERAL POWERTRAIN CHARACTERISTICS

3.1

 

Manufacturer of the propulsion unit

3.1.1.

 

Combustion engine

3.1.1.1.

L1e — L7e

Manufacturer: …

3.1.1.2.

L1e — L7e

Engine code (as marked on the engine or other means of identification): …

3.1.1.3.

L1e — L7e

Fuel identification marking (if available): …

3.1.2.

 

Electric motor

3.1.2.1.

L1e — L7e

Manufacturer: …

3.1.2.2.

L1e — L7e

Electric motor code (as marked on the engine or other means of identification): …

3.1.3.

 

Hybrid application

3.1.3.1.

L1e — L7e

Manufacturer: …

3.1.3.2.

L1e — L7e

Application code (as marked on the engine or other means of identification): …

3.1.3.3.

L1e — L7e

Fuel identification marking (if available): …

3.1.3.4.

L1e — L7e

Photographs and/or drawings of the location of the code(s) and/or type-approval numbers (completed example with dimensions)(20): …

3.2.

 

Combustion engine

3.2.1.

 

Specific engine information

3.2.1.1.

L1e — L7e

Number of combustion engines: …

3.2.1.2.

L1e — L7e

Working principle: internal combustion engine (ICE)/positive ignition/compression ignition /external combustion engine (ECE)/turbine/compressed air(4): …

3.2.1.3.

L1e — L7e

Cycle: four-stroke/two-stroke/rotary/other(4): …

3.2.1.4.

L1e — L7e

Cylinders

3.2.1.4.1.

L1e — L7e

Number: …

3.2.1.4.2.

L1e — L7e

Arrangement(26): …

3.2.1.4.3.

L1e — L7e

Bore(12): … mm

3.2.1.4.4.

L1e — L7e

Stroke(12): … mm

3.2.1.4.5.

L1e — L7e

Number and configuration of stators in the case of rotary-piston engine: …

3.2.1.4.6.

L1e — L7e

Volume of combustion chambers in the case of rotary-piston engine: … cm3

3.2.1.4.7.

L1e — L7e

Firing order: …

3.2.1.5.

L1e — L7e

Engine capacity(6): … cm3

3.2.1.6.

L1e — L7e

Volumetric compression ratio(7): …

3.2.1.7.

L1e — L7e

Number of inlet and exhaust valves

* 3.2.1.7.1.

L1e — L7e

Number and minimum cross-sectional areas of inlet and outlet ports: …

* 3.2.1.7.2.

L1e — L7e

Valve timing or equivalent data: …

* 3.2.1.7.3.

L1e — L7e

Maximum lift of valves, angles of opening and closing, or timing details of alternative distribution systems, in relation to dead centres. For variable timing system, minimum and maximum timing: …

* 3.2.1.7.4.

L1e — L7e

Reference and/or setting ranges(4): …

3.2.1.8.

L1e — L7e

Drawings of combustion chamber, cylinder head, piston, piston rings: …

3.2.1.9.

L1e — L7e

Normal warm engine idling speed: … min-1

3.2.1.10.

L1e — L7e

Stop-start system: yes/no(4)

* 3.2.2.

 

Powertrain/propulsion/drive-train management system

3.2.2.1.

L1e — L7e

PCUs/ECUs(4) software identification number(s): … and calibration verification number(s): …

3.2.3.

 

Fuel

3.2.3.1.

L1e — L7e

Fuel type: (9)

3.2.3.2.

L1e — L7e

Vehicle fuel configuration: mono-fuel/bi- fuel/flex fuel(4)

3.2.3.2.1.

L1e — L7e

Maximum amount of bio-fuel acceptable in fuel: … % by volume

3.2.4.

 

Fuel pressure delivery and control

3.2.4.1.

L1e — L7e

Brief description and schematic drawing of low-and/or high-pressure fuelling wet system(s)(4): …

3.2.4.2.

L1e — L7e

Low- and/or high-pressure fuel pump(s): yes/no(4)

3.2.4.2.1.

L1e — L7e

Fuel pump control: mechanical/on/off electric/continuous operation/electronically controlled variable operation(4): …

3.2.4.2.2.

L1e — L7e

For CI combustion engines and dual fuel engines only maximum fuel delivery (4)(7): … g/s or mm3/stroke or cycle at an engine speed of:…min-1 or, alternatively, a characteristic diagram: …

(When boost control is supplied, state the characteristic fuel delivery and boost pressure versus engine speed)

3.2.4.3.

L1e — L7e

Common rail: yes/no(4)

3.2.4.4.

L1e — L7e

Fuel distributor/rail/hoses(4): yes/no(4)

3.2.4.5.

L1e — L7e

Fuel pressure and/or fuel flow regulator(s): yes/no(4)

3.2.5.

 

Fuel mass metering and control

3.2.5.1.

L1e — L7e

By carburettor(s): yes/no(4)

* 3.2.5.1.1.

L1e — L7e

Operating principle and construction: …

* 3.2.5.1.2.

L1e — L7e

Maximum fuel-flow rate: … g/s at maximum power and torque: …

3.2.5.1.3.

L1e — L7e

Carburettor(s) settings(7): …

* 3.2.5.1.4.

L1e — L7e

Carburettor diffusers: …

* 3.2.5.1.5.

L1e — L7e

Carburettor fuel-level in float chamber: …

* 3.2.5.1.5.1.

L1e — L7e

Carburettor mass of float: …

3.2.5.1.6.

L1e — L7e

Carburettor cold-starting system: manual/automatic(4): yes/no(4)

3.2.5.1.6.1.

L1e — L7e

Carburettor cold-starting system operating principle(s): …

3.2.5.1.7.

L1e — L7e

Mixture scavenging port: yes/no(4)

3.2.5.1.7.1.

L1e — L7e

Mixture scavenging port dimensions: …

3.2.5.2.

L1e — L7e

By mechanically/hydraulically controlled fuel injection(4): yes/no(4)

3.2.5.2.1.

L1e — L7e

Operation principle: …

3.2.5.2.2.

L1e — L7e

Mechanical/electronic(4) adjustment of maximum fuel mass delivery: yes/no(4)

3.2.5.3.

L1e — L7e

By electronically controlled fuel injection system: yes/no(4)

3.2.5.3.1.

L1e — L7e

Operation principle: port injection/direct injection/pre-chamber/swirl chamber(4): …

3.2.5.3.2.

L1e — L7e

Fuel injector(s): single-/multi-point/direct injection/other (specify) (4): …

3.2.5.3.3.

L1e — L7e

Total and per cylinder amount of fuel injectors: …

3.2.5.4.

L1e — L7e

Air-assisted fuel injector: yes/no(4): …

3.2.5.4.1.

L1e — L7e

Description and operating pressure of air-assist: …

3.2.5.5.

L1e — L7e

Cold start system: yes/no(4)

3.2.5.5.1.

L1e — L7e

Description of cold start system: …

3.2.5.6.

L1e — L7e

Auxiliary starting aid: yes/no(4)

3.2.5.7.

L1e — L7e

CI injection specific: yes/no

3.2.5.7.1.

L1e — L7e

Static injection timing(7): …

3.2.5.7.2.

L1e — L7e

Injection advance curve(7): …

3.2.6.

 

Gaseous fuelling system and control

3.2.6.1.

L1e — L7e

Brief description and schematic drawing of gaseous fuelling system(s): …

3.2.6.2.

L1e — L7e

Liquefied petroleum gas (LPG) fuelling system: yes/no(4)

3.2.6.2.1.

L1e — L7e

Type-approval number according to UNECE Regulation No 67 (7): …

3.2.6.2.2.

L1e — L7e

Electronic engine management control unit for LPG fuelling: yes/no(4)

3.2.6.2.2.1.

L1e — L7e

Emission-related adjustment possibilities: …

3.2.6.2.3.

L1e — L7e

Further documentation: …

* 3.2.6.2.3.1

L1e — L7e

Description of the safeguarding of the catalyst at switch-over from petrol to LPG or back: …

3.2.6.2.3.2

L1e — L7e

System layout (electrical connections, vacuum connections, compensation hoses, etc.): …

3.2.6.2.4.

L1e — L7e

Drawing of the symbol: …

3.2.6.3.

L1e — L7e

Natural gas (NG) fuelling system: yes/no(4)

3.2.6.3.1.

L1e — L7e

Type-approval number according to UNECE Regulation No 110 (8): …

3.2.6.3.2.

L1e — L7e

Electronic engine management-control unit for NG fuelling: yes/no(4)

3.2.6.3.2.1.

L1e — L7e

Emission-related adjustment possibilities: …

3.2.6.3.3..

L1e — L7e

Further documentation: …

* 3.2.6.3.3.1.

L1e — L7e

Description of the safeguarding of the catalyst at switch-over from petrol to NG or back: …

3.2.6.3.3.2.

L1e — L7e

System layout (electrical connections, vacuum connections compensation hoses, etc.): …

3.2.6.3.4.

L1e — L7e

Drawing of the symbol: …

3.2.6.4.

L1e — L7e

Gaseous fuel: LPG/NG-H/NG-L/NG-HL(4): yes/no(4)

3.2.6.4.1.

L1e — L7e

Pressure regulator(s) or vaporiser/pressure regulator(s)(4)

* 3.2.6.4.1.1.

L1e — L7e

Number of pressure reduction stages: …

3.2.6.4.1.2.

L1e — L7e

Pressure in final stage, minimum: … kPa — maximum: … kPa

3.2.6.4.1.3.

L1e — L7e

Number of main adjustment points: …

3.2.6.4.1.4.

L1e — L7e

Number of idle adjustment points: …

3.2.6.4.1.5.

L1e — L7e

Type-approval number: …

3.2.6.4.2.

L1e — L7e

Fuelling system: mixing unit/gas injection/liquid injection/direct injection(4)

* 3.2.6.4.2.1.

L1e — L7e

Mixture strength regulation: …

3.2.6.4.2.2.

L1e — L7e

System description and/or diagram and drawings: …

3.2.6.4.2.3.

L1e — L7e

Type-approval number: …

3.2.6.4.3.

L1e — L7e

Mixing unit: yes/no(4)

3.2.6.4.3.1.

L1e — L7e

Number: …

3.2.6.4.3.2.

L1e — L7e

Location: …

3.2.6.4.3.3.

L1e — L7e

Adjustment possibilities: …

3.2.6.4.3.4.

L1e — L7e

Type-approval number: …

3.2.6.4.4.

L1e — L7e

Inlet manifold injection: yes/no(4)

3.2.6.4.4.1.

L1e — L7e

Injection: single-point/multi-point(4)

3.2.6.4.4.2.

L1e — L7e

Injection: continuous/simultaneously timed/sequentially timed(4)

3.2.6.4.5.

L1e — L7e

Injection equipment: yes/no(4)

3.2.6.4.5.1.

L1e — L7e

Adjustment possibilities: …

3.2.6.4.5.2.

L1e — L7e

Type-approval number: …

3.2.6.4.6.

L1e — L7e

Supply pump: yes/no(4)

3.2.6.4.6.1.

L1e — L7e

Type-approval number: …

3.2.6.4.7.

L1e — L7e

Injector(s): …

3.2.6.4.7.1.

L1e — L7e

Type-approval number: …

3.2.6.4.8.

L1e — L7e

Direct/port injection: yes/no(4)

3.2.6.4.9.

L1e — L7e

Injection pump/pressure regulator: yes/no (4)

3.2.6.4.9.1.

L1e — L7e

Type-approval number: …

3.2.6.4.10.

L1e — L7e

Separate electronic control unit (ECU) for gaseous fuelling system: yes/no(4)

3.2.6.4.10.1.

L1e — L7e

Adjustment possibilities: …

3.2.6.4.10.2.

L1e — L7e

Software identification number(s): …

3.2.6.4.10.3.

L1e — L7e

Calibration verification number(s): …

3.2.6.5.

L1e — L7e

NG fuel-specific equipment: …

3.2.6.5.1.

L1e — L7e

Variant 1 (only in the case of approvals of engines for several specific fuel compositions): …

3.2.6.5.2.

L1e — L7e

Fuel composition:

 

 

Overview

methane (CH4):

basis: …%mole

min. …%mole

max. …%mole

ethane (C2H6):

basis: …%mole

min. …%mole

max. …%mole

propane (C3H8):

basis: …%mole

min. …%mole

max. …%mole

butane (C4H10):

basis: …%mole

min. …%mole

max. …%mole

C5/C5+:

basis: …%mole

min. …%mole

max. …%mole

oxygen (O2):

basis: …%mole

min. …%mole

max. …%mole

inert (N2, He, etc.):

basis: …%mole

min. …%mole

max. …%mole

3.2.6.5.3.

L1e — L7e

Gaseous fuel injector(s): …

3.2.6.5.4.

L1e — L7e

Variant 2 (only in the case of approvals for several specific fuel compositions): …

3.2.6.6.

L1e — L7e

Hydrogen fuel-specific equipment: yes/no(4)

3.2.6.6.1.

L1e — L7e

EC type-approval number according to Regulation (EC) No 79/2009 of the European Parliament and of the Council (9): …

* 3.2.6.6.2.

L1e — L7e

Further documentation

3.2.6.6.3.

L1e — L7e

System layout (electrical connections, vacuum connections, compensation hoses, etc.): …

* 3.2.6.6.4.

L1e — L7e

Description of the safeguarding of the catalyst at switch-over from petrol to hydrogen/H2NG(4) or back: …

3.2.6.6.5.

L1e — L7e

Drawing of the symbol: …

3.2.6.7.

L1e — L7e

H2NG fuelling system: yes/no(4)

3.2.6.7.1.

L1e — L7e

Percentage of hydrogen in the fuel (the maximum specified by the manufacturer): …

3.2.7.

 

Air-induction system

3.2.7.1.

L1e — L7e

Brief description and schematic drawing of gaseous intake air-flow and induction system: …

3.2.7.2.

L1e — L7e

Intake manifold description and working principle (e.g. fixed length/variable length/swirl valves)(4) (include detailed drawings and/or photos): …

* 3.2.7.2.1.

L1e — L7e

Description and drawings of inlet pipes and their accessories (plenum chamber, heating device with control strategy, additional air intakes, etc.): …

3.2.7.3.

L1e — L7e

Intake air pressure charger: yes/no(4)

3.2.7.3.1.

L1e — L7e

Brief description and schematic drawing of the intake air-pressure charger system: …

3.2.7.3.2.

L1e — L7e

Working and control principles: …

3.2.7.3.3.

L1e — L7e

Type(s) (turbo or supercharger, other)(4): …

3.2.7.3.4.

L1e — L7e

Maximum intake air-charge pressure and flow-rate at maximum torque and power: … kPa and g/s or charge pressure and flow-rate map: … kPa and g/s

3.2.7.4.

L1e — L7e

Waste gate: yes/no(4)

3.2.7.5.

L1e — L7e

Intercooler: yes/no(4)

3.2.7.5.1.

L1e — L7e

Type: air-air/air-water/other(4)

* 3.2.7.5.2.

L1e — L7e

Intake depression at rated engine speed and at 100 % load (compression ignition engines only): … kPa

3.2.7.6.

L1e — L7e

Air filter, (drawings, photographs): …

3.2.7.7.

L1e — L7e

Intake air-silencer description (drawings, photographs): …

* 3.2.7.7.1.

L1e — L7e

Working principle: …

3.2.8.

 

Air-mass metering and control

3.2.8.1.

L1e — L7e

Brief description and schematic drawing of air-mass metering and control system: …

3.2.8.2.

L1e — L7e

Mechanical throttle body: yes/no(4)

3.2.8.3.

L1e — L7e

Electronic throttle control (ETC): yes/no(4)

3.2.8.3.1.

L1e — L7e

Schematic drawing of electronic throttle control: …

* 3.2.8.3.1.2.

L1e — L7e

Description of ETC hardware redundancies regarding sensors/actuators/electric power/ground/control electronics: …

3.2.9.

 

Spark delivery system and control

3.2.9.1.

L1e — L7e

Brief description and schematic drawing of spark delivery and control system: …

3.2.9.1.1.

L1e — L7e

Working principle: …

 

L1e — L7e

Ignition advance curve or map(7) at wide open throttle: …

3.2.9.1.3.

L1e — L7e

Static ignition timing (7): … degrees before TDC at maximum torque and power

3.2.9.2.

L1e — L7e

Ion sense capability: yes/no(4)

3.2.9.3.

L1e — L7e

Spark plugs:

3.2.9.3.1.

L1e — L7e

Gap setting: … mm

3.2.9.4.

L1e — L7e

Ignition coil(s):

* 3.2.9.4.1.

L1e — L7e

Working principle: …

* 3.2.9.4.2.

L1e — L7e

Dwell angle and timing at wide open throttle: …

3.2.10.

 

Powertrain cooling system and control

3.2.10.1.

L1e — L7e

Brief description and schematic drawing of powertrain cooling and control system: …

3.2.10.2.

L1e — L7e

Cooling system: liquid: yes/no(4)

3.2.10.2.1.

L1e — L7e

Maximum temperature at outlet: … K

3.2.10.2.2.

L1e — L7e

Nominal setting of the engine temperature control mechanism: …

3.2.10.2.3.

L1e — L7e

Nature of liquid: …

3.2.10.2.4.

L1e — L7e

Circulating pump(s): yes/no(4)

3.2.10.2.4.1.

L1e — L7e

Characteristics: …

3.2.10.2.5.

L1e — L7e

Drive ratio(s): …

3.2.10.2.6.

L1e — L7e

Description of the fan and its drive mechanism: …

3.2.10.3.

L1e — L7e

Air cooling: yes/no(4)

3.2.10.3.1.

L1e — L7e

Reference point: …

3.2.10.3.2.

L1e — L7e

Maximum temperature at reference point: … K

3.2.10.3.3.

L1e — L7e)

Fan: yes/no(4)

3.2.10.3.3.1.

L1e — L7e

Characteristics: …

3.2.10.3.3.2.

L1e — L7e

Drive ratio(s): …

3.2.11.

 

Powertrain lubrication system and control

3.2.11.1.

L1e — L7e

Brief description and schematic drawing of powertrain lubrication and control system: …

3.2.11.2.

L1e — L7e

Lubrication system configuration(s) (wet sump, dry sump, other, pump/injection into induction system/mixed with the fuel, etc.)(4): …

3.2.11.3.

L1e — L7e

Location of oil reservoir (if any): …

3.2.11.4.

L1e — L7e

Feed system (pump/injection into induction system/mixed with the fuel, etc.)(4): …

3.2.11.5.

L1e — L7e

Lubricating pump: yes/no(4)

3.2.11.6.

L1e — L7e

Oil cooler: yes/no(4)

3.2.11.6.1.

L1e — L7e

Drawing …

3.2.11.7.

L1e — L7e

Lubricant(s) characteristics: …

3.2.11.8.

L1e — L7e

Lubricant mixed with the fuel: yes/no(4): …

3.2.11.8.1.

L1e — L7e

Percentage range of lubricant mixed with the fuel: …

3.2.12.

 

Exhaust system and control

3.2.12.1.

L1e — L7e

Brief description and schematic drawing of exhaust devices for noise and tailpipe emission control: …

3.2.12.2.

L1e — L7e

Description and drawing of the exhaust manifold: …

3.2.12.3.

L1e — L7e

Description and detailed drawing of the exhaust device: …

3.2.12.4.

L1e — L7e

Maximum permissible exhaust back-pressure at rated engine speed and at 100 % load: … kPa(29)

3.2.12.5.

L1e — L7e

Type, marking of exhaust noise-abatement device(s): …

* 3.2.12.6.

L1e — L7e

Noise-reducing measures in the engine compartment and on the engine where relevant for external noise: …

3.2.12.7.

L1e — L7e

Location of the exhaust outlet: …

3.2.12.8.

L1e — L7e

Exhaust noise-abatement device containing fibrous materials: yes/no(4): …

3.2.13.

 

Other electrical systems and control than those intended for the electrical propulsion

3.2.13.1.

L1e — L7e

Rated voltage: … V, positive/negative ground(4)

3.2.13.2.

L1e — L7e

Generator: yes/no(4):

3.2.13.2.1.

L1e — L7e

Nominal output: … VA

3.2.13.3.

L1e — L7e

Battery(ies): yes/no(4)

3.2.13.3.1.

L1e — L7e

Capacity and other characteristics (mass,…): …

3.2.13.4.

L1e — L7e

Electric heating systems for the passenger compartment: yes/no(4)

3.3.

 

Pure electric and hybrid electric propulsion and control

3.3.1.

L1e — L7e

Electric vehicle configuration: pure electric/hybrid electric/manpower — electric(4):

3.3.2.

L1e — L7e

Brief description and schematic drawing of pure and hybrid electric propulsions and its control system(s): …

3.3.3.

 

Electric propulsion motor

3.3.3.1.

L1e — L7e

Number of electric motors for propulsion: …

3.3.3.2.

L1e — L7e

Type (winding, excitation): …

3.3.3.3.

L1e — L7e

Operating voltage: … V

3.3.4.

 

Propulsion batteries

3.3.4.1.

L1e — L7e

Primary propulsion battery

3.3.4.1.1.

L1e — L7e

Number of cells: …

3.3.4.1.2.

L1e — L7e

Mass: … kg

3.3.4.1.3.

L1e — L7e

Capacity: … Ah (Amp-hours) / … V

3.3.4.1.4.

L1e — L7e

Voltage: … V

3.3.4.1.5.

L1e — L7e

Position in the vehicle: …

3.3.4.2.

L1e — L7e

Secondary propulsion battery

3.3.4.2.1.

L1e — L7e

Number of cells: …

3.3.4.2.2.

L1e — L7e

Mass: … kg

3.3.4.2.3.

L1e — L7e

Capacity: … Ah (Amp-hours) / … V

3.3.4.2.4.

L1e — L7e

Voltage: … V

3.3.4.2.5.

L1e — L7e

Position in the vehicle: …

3.3.5.

 

Hybrid electric vehicle

3.3.5.1.

L1e — L7e

Engine or motor combination (number of electric motor(s) and/or combustion engine(s)/other)(4): …

3.3.5.2.

L1e — L7e

Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging:

3.3.5.3.

L1e — L7e

Operating mode switch: with/without(4)

3.3.5.4.

L1e — L7e

Selectable modes: yes/no(4)

3.3.5.5.

L1e — L7e

Pure fuel consuming: yes/no(4)

3.3.5.6.

L1e — L7e

Vehicle propelled with fuel cell: yes/no(4)

3.3.5.7.

L1e — L7e

Hybrid operation modes: yes/no(4) (if yes, short description): …

3.3.6.

 

Energy storage device

3.3.6.1.

L1e — L7e

Description: (battery, capacitor, flywheel/generator)(4)

3.3.6.2.

L1e — L7e

Identification number: …

* 3.3.6.3.

L1e — L7e

Kind of electrochemical couple: …

3.3.6.4.

L1e — L7e

Energy (for battery: voltage and capacity Ah in 2h, for capacitor: J,…, for flywheel/generator: J,…,): …

3.3.6.5.

L1e — L7e

Charger: on-board/external/without(4)

3.3.7.

 

Electric motor (describe each type of electric motor separately)

3.3.7.1.

L1e — L7e

Primary use: propulsion motor/generator(4)

3.3.7.2.

L1e — L7e

When used as propulsion motor: single-/multi-motors (number)(4): …

3.3.7.3.

L1e — L7e

Working principle: …

3.3.7.4.

L1e — L7e

Direct current/alternating current/number of phases: …

3.3.7.5.

L1e — L7e

Separate excitation/series/compound(4):

3.3.7.6.

L1e — L7e

Synchronous/asynchronous(4):

3.3.8.

 

Electric motor control unit

3.3.8.1.

L1e — L7e

Identification number: …

3.3.9.

 

Power controller

3.3.9.1.

L1e — L7e

Identification number: …

3.4.

 

Other engines, electric motors or combinations (specific information concerning the parts of these motors)

3.4.1.

 

Cooling system (temperatures permitted by the manufacturer)

3.4.1.1.

L1e — L7e

Liquid cooling: …

3.4.1.1.1.

L1e — L7e

Maximum temperature at outlet: … K

3.4.1.2.

L1e — L7e

Air cooling: …

3.4.1.2.1.

L1e — L7e

Reference point: …

3.4.1.2.2.

L1e — L7e

Maximum temperature at reference point: … K

3.4.2.

 

Lubrication system

3.4.2.1.

L1e — L7e

Description of lubrication system: …

3.4.2.2.

L1e — L7e

Location of oil reservoir (if any): …

3.4.2.3.

L1e — L7e

Feed system (pump/injection into induction system/mixed with the fuel, etc.)(4): …

3.4.2.4.

L1e — L7e

Lubricant mixed with the fuel: …

3.4.2.4.1.

L1e — L7e

Percentage: …

3.4.2.5.

L1e — L7e

Oil cooler: yes/no(4): …

* 3.4.2.5.1.

L1e — L7e

Drawing(s): …

3.5.

 

Drive-train and control (13)

3.5.1.

L1e — L7e

Brief description and schematic drawing of the vehicle drive-train and its control system (gear shift control, clutch control or any other element of drive-train): …

3.5.2.

 

Clutch

3.5.2.1.

L1e — L7e

Brief description and schematic drawing of the clutch and its control system: …

3.5.3.

 

Transmission

3.5.3.1.

L1e — L7e

Brief description and schematic drawing of gear shift system(s) and its control: …

3.5.3.2.

L1e — L7e

Drawing of the transmission: …

3.5.3.3.

L1e — L7e

Type (mechanical, hydraulic, electric, manual/manual automated/automatic/CVT/ other (indicate).)(4): …

3.5.3.4.

L1e — L7e

A brief description of the electrical/electronic components (if any): …

3.5.3.5.

L1e — L7e

Location relative to the engine: …

3.5.3.6.

L1e — L7e

Method of control: …

3.5.4.

L1e — L7e

Gear ratios

 

 

Overview gear ratios

Gear

Internal transmission ratios (ratios of engine to transmission output shaft revolutions)

Final drive ratio(s) (ratio of transmission output shaft to driven wheel revolutions)

Total gear ratios

Ratio (engine speed/vehicle speed) for manual transmission only

Maximum for CVT (12)

1

2

3

Minimum for CVT (12)

 

 

 

 

Reverse

 

 

 

 

3.5.4.1.

L3e-AxE,

L3e-AxT

Final drive ratio: …

3.5.4.2.

L3e-AxE,

L3e-AxT

Overall gear ratio in highest gear: …

3.6.

 

Safe-cornering device

3.6.1.

L1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7e

Safe-cornering device (Annex VIII to Regulation (EU) No 168/2013: yes/no(4); differential/other(4)

3.6.2.

L1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7e

Differential lock: yes/no/optional(4)

3.6.3.

L1e — L7e

Brief description and schematic drawing of the safe-cornering device, the differential lock and their control systems: …

3.7.

 

Suspension and control

3.7.1.

L1e — L7e

Brief description and schematic drawing of suspension and its control system: …

3.7.2.

L1e — L7e

Drawing of the suspension arrangements: …

3.7.3.

L1e — L7e

Level adjustment: yes/no/optional(4)

3.7.4.

L1e — L7e

Brief description of the electrical/electronic components: …

3.7.5.

L1e — L7e

Stabilisers: yes/no/optional(4)

3.7.6.

L1e — L7e

Shock absorbers: yes/no/optional(4)

3.8.

 

Passenger-compartment heating system and air-conditioning

3.8.1.

 

Passenger-compartment heating system

3.8.1.1.

L2e, L5e-B, L6e-B, L7e

An overall drawing of the heating system giving its location on the vehicle (and the arrangement of the sound damping devices (including the position of the heat exchange points)): …

3.8.1.2.

L2e, L5e-B, L6e-B, L7e

An overall drawing of the heat-exchanger used in systems utilising the heat from the exhaust gases, or of the parts where that exchange takes place (in the case of heating systems using the heat provided by the engine cooling air): …

3.8.1.3.

L2e, L5e-B, L6e-B, L7e

A sectional drawing of the heat-exchanger or parts where heat exchange takes place, together with a statement of the wall thickness, of the materials used and the characteristics of their surface: …

3.8.1.4.

L2e, L5e-B, L6e-B, L7e

Specifications regarding the method of manufacture and technical data relating to other major components of the heating system, such as the fan: …

3.8.2.

 

Air-conditioning

3.8.2.1.

L2e, L5e-B, L6e-B, L7e

Brief description and schematic drawing of air-conditioning and its control system: …

3.8.2.2.

L2e, L5e-B, L6e-B, L7e

Gas used as refrigerant in the air-conditioning system: …

3.8.2.3.

L2e, L5e-B, L6e-B, L7e

The air-conditioning system is designed to contain fluorinated greenhouse gases with global warming potential higher than 150: yes/no(4). If Yes, fill in the following sections:

3.8.2.3.1.

L2e, L5e-B, L6e-B, L7e

Drawing and brief description of the air-conditioning system, including the reference or part number and material of the leak components: …

3.8.2.3.2.

L2e, L5e-B, L6e-B, L7e

Leakage of the air-conditioning system

3.8.2.3.3.

L2e, L5e-B, L6e-B, L7e

Reference or part number and material of the components of the system and test information (e.g. test report number, Type-approval number, etc.): …

3.8.2.3.4.

L2e, L5e-B, L6e-B, L7e

Overall leakage/year of the entire system: … g/year

3.9.

 

Cycles designed to pedal

3.9.1.

L1e

Ratio manpower/electric power: …

3.9.2.

L1e

Maximum assistance factor: …

3.9.3.

L1e

Maximum vehicle speed for which the electric motor gives assistance: … km/h

3.9.4.

L1e

Switch-off distance: … km

4.

 

GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE

4.0

 

General information on environmental and propulsion performance

4.0.1.

L1e — L7e

Environmental step(16): Euro … (3/4/5) (4)

4.1.

 

Tailpipe emission-control system

4.1.1.

L1e — L7e

Brief description and schematic drawing of the tailpipe emission-control system and its control: …

4.1.2.

 

Catalytic converter

4.1.2.1.

L1e — L7e

Configuration, number of catalytic converters and elements (information to be provided for each separate unit): …

4.1.2.2.

L1e — L7e

Drawing with dimensions, shape and volume of the catalytic converter(s): …

4.1.2.3.

L1e — L7e

Catalytic reaction: …

* 4.1.2.4.

L1e — L7e

Total charge of precious metals: …

* 4.1.2.5.

L1e — L7e

Relative concentration: …

* 4.1.2.6.

L1e — L7e

Substrate (structure and material): …

* 4.1.2.7.

L1e — L7e

Cell density: …

* 4.1.2.8.

L1e — L7e

Casing for the catalytic converter(s): …

4.1.2.9.

L1e — L7e

Location of the catalytic converter(s) (place and reference distance in the exhaust line): …

4.1.2.10.

L1e — L7e

Catalyst heat-shield: yes/no(4)

4.1.2.11.

L1e — L7e

Brief description and schematic drawing of the regeneration system/method of exhaust after-treatment systems and its control system: …

* 4.1.2.11.1.

L1e — L7e

Normal operating temperature range: … K

4.1.2.11.2.

L1e — L7e

Consumable reagents: yes/no(4)

4.1.2.11.3.

L1e — L7e

Brief description and schematic drawing of the reagent flow (wet) system and its control system: …

4.1.2.11.4.

L1e — L7e

Type and concentration of reagent needed for catalytic action: …

* 4.1.2.11.5.

L1e — L7e

Normal operational temperature range of reagent: … K

4.1.2.11.6.

L1e — L7e

Frequency of reagent refill: continuous/maintenance(4)

4.1.2.12.

L1e — L7e

Identifying part number: …

4.1.3.

 

Oxygen sensor(s)

4.1.3.1.

L1e — L7e

Oxygen sensor component(s) drawing(s): …

4.1.3.2.

L1e — L7e

Drawing of exhaust device with oxygen sensor location(s) (dimensions relative to exhaust valves): …

4.1.3.3.

L1e — L7e

Control range(s): …

4.1.3.4.

L1e — L7e

Identifying part number(s): …

4.1.3.5.

L1e — L7e

Description of oxygen sensor heating system and heating strategy: …

4.1.3.6.

L1e — L7e

Oxygen sensor heat shield(s): yes/no(4)

4.1.4.

 

Secondary air-injection (air-inject in exhaust)

4.1.4.1.

L1e — L7e

Brief description and schematic drawing of the secondary air-injection system and its control system: …

4.1.4.2.

L1e — L7e

Configuration (mechanical, pulse air, air pump etc.)(4): …

4.1.4.3.

L1e — L7e

Working principle: …

4.1.5.

 

External exhaust gas recirculation (EGR)

4.1.5.1.

L1e — L7e

Brief description and schematic drawing of the EGR system (exhaust flow) and its control system: …

4.1.5.2.

L1e — L7e

Characteristics: …

4.1.5.3.

L1e — L7e

Water-cooled EGR system: yes/no(4)

4.1.5.4.

L1e — L7e

Air-cooled EGR system: yes/no(4)

4.1.6.

 

Particulate filter

4.1.6.1.

L1e — L7e

PT component drawing with dimensions, shape and capacity of the particulate filter: …

4.1.6.2.

L1e — L7e

Design of the particulate filter: …

4.1.6.3.

L1e — L7e

Brief description and schematic drawing of the particulate filter and its control system: …

4.1.6.4.

L1e — L7e

Location (reference distance in the exhaust line): …

4.1.6.5.

L1e — L7e

Method or system of regeneration, description and drawing: …

4.1.6.6.

L1e — L7e

Identifying part number: …

4.1.7.

 

Lean NOx trap

4.1.7.1.

L1e — L7e

Operation principle of lean NOx trap: …

4.1.8.

 

Additional tailpipe emission-control devices (if any not covered under another heading)

4.1.8.1.

L1e — L7e

Working principle: …

4.2.

 

Crankcase emission control system

4.2.1.

L1e — L7e

Configuration of crank-case gas recycling system (breather system, positive crank-case ventilation system, other)(4) (description and drawings).

4.3.

 

Evaporative emission control system

4.3.1.

L1e — L7e

Evaporative emissions control system: yes/no(4)

4.3.2.

L1e — L7e

Drawing of the evaporative control system

4.3.3.

L1e — L7e

Drawing of the canister (including dimensions and indicating vent and purge mechanism)

4.3.4.

L1e — L7e

Working capacity: … g

4.3.5.

L1e — L7e

Adsorption material: … (e.g. charcoal, carbon, synthetic, …)

4.3.6.

L1e — L7e

Housing material: … (e.g. plastic, steel, …)

4.3.7.

L1e — L7e

Schematic drawing of the fuel tank, indicating capacity and material: …

4.3.8.

L1e — L7e

Drawing of the heat-shield between tank and exhaust device: …

4.4.

 

Additional information on environmental and propulsion unit performance

4.4.1.

L1e — L7e

Description and/or schematic drawings of additional pollution-control devices: …

4.4.2.

L1e — L7e

Location of the coefficient of absorption symbol (compression-ignition engines only): …

4.4.3.

L1e — L7e

Applicable information document set out in respectively UN Regulation No 9, 41 or 63 shall supplement this information document with regard to the sound level.

4.4.4.

L1e — L7e

Applicable information document set out in respectively UN Regulation No 92 shall supplement this information document with regards to the noise-abatement devices installed on the vehicle.

5.

 

VEHICLE PROPULSION FAMILY

5.1.

L1e — L7e

To define the vehicle propulsion family, the manufacturer shall submit the information required for classification criteria set out in point 3 of Annex XI to Commission Delegated Regulation (EU) No 134/2014, if not already provided in the information document.

6.

 

INFORMATION ON FUNCTIONAL SAFETY

6.1.

 

Audible warning devices

6.1.1.

L1e — L7e

Summary description of device(s) used and their purpose: …

6.1.2.

L1e — L7e

Drawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle: …

6.1.3.

L1e — L7e

Details of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached: …

6.1.4.

L1e — L7e

Electrical/pneumatic circuit diagram: …

6.1.4.1.

L1e — L7e

Voltage: AC/DC(4)

6.1.4.2.

L1e — L7e

Rated voltage or pressure: …

6.1.5.

L1e — L7e

Drawing of the mounting device: …

6.2.

 

Braking, including anti-lock and combined braking systems

6.2.1.

L1e — L7e

Characteristics of the brakes, including details and drawings of the drums, discs, hoses, make and type of shoe/pad assemblies and/or linings, effective braking areas, radius of drums, shoes or discs, mass of drums, adjustment devices, relevant parts of the axle(s) and suspension, levers, pedals (4): …

6.2.2.

L1e — L7e

Operating diagram, description and/or drawing of the braking system, including details and drawings of the transmission and controls as well as a brief description of the electrical and/or electronic components used in the braking system(4):

6.2.2.1.

L1e — L7e

Front, rear and sidecar brakes, disc and/or drum(4):

6.2.2.2.

L1e — L7e

Parking braking system: …

6.2.2.3.

L1e — L7e

Any additional braking system: …

6.2.3.

L1e — L7e

Vehicle is equipped to tow a trailer with no brake/overrun brake/electric/pneumatic/hydraulic service brakes: yes/no(4): …

6.2.4.

L1e — L7e

Anti-lock/Combined braking system

6.2.4.1.

L1e — L7e

Anti-lock braking system: yes/no/optional(4)

6.2.4.2.

L1e — L7e

Combined braking system: yes/no/optional(4)

6.2.4.3.

L1e — L7e

Anti-lock and combined braking system: yes/no/optional(4)

6.2.4.4.

L1e — L7e

Schematic drawing(s): …

6.2.5.

L1e — L7e

Hydraulic reservoir(s) (volume and location): …

6.2.6.

L1e — L7e

Particular characteristics of the braking system(s)

6.2.6.1.

L1e — L7e

Brake shoes and/or pads(4): …

6.2.6.2.

L1e — L7e

Linings and/or pads (indicate make, type, grade of material or identification mark): …

6.2.6.3.

L1e — L7e

Brake levers and/or pedals(4): …

6.2.6.4.

L1e — L7e

Other devices (where applicable): drawing and description: …

6.3.

 

Electrical safety

6.3.1.

L1e — L7e

Brief description of the power circuit components installation and drawings/photographs showing the location of the power circuit components installation: …

6.3.2.

L1e — L7e

Schematic diagram of all electrical functions included in power circuit: …

6.3.3.

L1e — L7e

Working voltage(s) (V): …

6.3.4.

L1e — L7e

Description of protection against electric-shocks: …

6.3.5.

L1e — L7e

Fuse and/or circuit breaker yes/no/optional(4)

6.3.5.1.

L1e — L7e

Diagram showing the functional range: …

6.3.6.

L1e — L7e

Configuration of power wiring harness: …

6.4.

 

Front and rear protective structures

6.4.1.

 

Front protective structure

6.4.1.1.

L1e — L7e

Detailed technical description (including photographs or drawings): …

6.4.1.2.

L1e — L7e

Materials used: …

6.4.2.

 

Rear protective structure

6.4.2.1.

L1e — L7e

Detailed technical description (including photographs or drawings): …

6.4.2.2.

L1e — L7e

Materials used: …

6.5.

 

Glazing, windscreen wipers and washers, and defrosting and demisting systems

6.5.1.

 

Windscreen

6.5.1.1.

L2e, L5e, L6e, L7e

Materials used: …

6.5.1.2.

L2e, L5e, L6e, L7e

Method of mounting: …

6.5.1.3.

L2e, L5e, L6e, L7e

Angle of inclination: …

6.5.1.4.

L2e, L5e, L6e, L7e

Windscreen accessories and the position in which they are fitted, together with a brief description of any electrical/electronic components: …

6.5.1.5.

L2e, L5e, L6e, L7e

Drawing of the windscreen with dimensions: …

6.5.2.

 

Other windows

6.5.2.1.

L2e, L5e, L6e, L7e

Materials used: …

6.5.2.2

L2e, L5e, L6e, L7e

A brief description of the electrical/electronic components (if any) of the window lifting mechanism: …

6.5.3.

 

Opening roof glazing

6.5.3.1.

L2e, L5e, L6e, L7e

Materials used: …

6.5.4.

 

Other glass panes

6.5.4.1.

L2e, L5e, L6e, L7e

Materials used: …

6.6.

 

Windscreen wiper(s)

6.6.1.

L2e, L5e, L6e, L7e

Detailed technical description (including photographs or drawings): …

6.7.

 

Windscreen washer

6.7.1.

L2e, L5e, L6e, L7e

Detailed technical description (including photographs or drawings): …

6.7.2.

L2e, L5e, L6e, L7e

Capacity of the reservoir: … l

6.8.

 

Defrosting and demisting

6.8.1.

L2e, L5e, L6e, L7e

Detailed technical description (including photographs or drawings): …

6.9.

 

Driver-operated controls including identification of controls, tell-tales and indicators

6.9.1.

L1e — L7e

Arrangement and identification of controls, tell-tales and indicators: …

6.9.2.

L1e — L7e

Photographs and/or drawings of the arrangement of symbols and controls, tell-tales and indicators: …

6.9.3.

L1e — L7e

Controls, tell-tales and indicators for which, when fitted, identification is mandatory, including the identification symbols to be used for that purpose:

6.9.4.

L1e — L7e

Summary table: the vehicle is equipped with the following driver-operated controls, including indicators and tell-tales(4)

Controls, tell-tales and indicators for which, when fitted, identification is mandatory, and symbols to be used for that purpose

Symbol No

Device

Control / indicator available (13)

Identified by symbol (13)

Where (14)

Tell-tale available (13)

Identified by symbol (13)

Where (14)

1

Master light

 

 

 

 

 

 

2

Dipped-beam head lamps

 

 

 

 

 

 

3

Main-beam head lamps

 

 

 

 

 

 

4

Position (side) lamps

 

 

 

 

 

 

5

Front fog lamps

 

 

 

 

 

 

6

Rear fog lamp

 

 

 

 

 

 

7

Headlamp levelling device

 

 

 

 

 

 

8

Parking lamps

 

 

 

 

 

 

9

Direction indicators

 

 

 

 

 

 

10

Hazard warning

 

 

 

 

 

 

11

Windscreen wiper

 

 

 

 

 

 

12

Windscreen washer

 

 

 

 

 

 

13

Windscreen wiper and washer

 

 

 

 

 

 

14

Headlamp cleaning device

 

 

 

 

 

 

15

Windscreen demisting and defrosting

 

 

 

 

 

 

16

Rear window demisting and defrosting

 

 

 

 

 

 

17

Ventilating fan

 

 

 

 

 

 

18

Diesel pre-heat

 

 

 

 

 

 

19

Choke

 

 

 

 

 

 

20

Brake failure

 

 

 

 

 

 

21

Fuel level

 

 

 

 

 

 

22

Battery charging condition

 

 

 

 

 

 

23

Engine coolant temperature

 

 

 

 

 

 

24

Malfunction indicator light (MI)

 

 

 

 

 

 

6.9.5.

L1e — L7e

Controls, tell-tales and indicators for which, when fitted, identification is optional, and symbols which shall be used if they are to be identified

Symbol No

Device

Control / indicator available (15)

Identified by symbol (15)

Where (16)

Tell-tale available (15)

Identified by symbol (15)

Where (16)

1

Parking brake

 

 

 

 

 

 

2

Rear window wiper

 

 

 

 

 

 

3

Rear window washer

 

 

 

 

 

 

4

Rear window wiper and washer

 

 

 

 

 

 

5

Intermittent windscreen wiper

 

 

 

 

 

 

6

Audible warning device (horn)

 

 

 

 

 

 

7

Front hood (bonnet)

 

 

 

 

 

 

8

Rear hood (boot)

 

 

 

 

 

 

9

Seat belt

 

 

 

 

 

 

10

Engine oil pressure

 

 

 

 

 

 

11

Unleaded petrol

 

 

 

 

 

 

12

 

 

 

 

 

 

13

 

 

 

 

 

 

6.10.

 

Speedometer and odometer

6.10.1.

 

Speedometer

6.10.1.1.

L1e — L7e

Photographs and/or drawings of the complete system: …

6.10.1.2.

L1e — L7e

Vehicle speed range displayed: …

6.10.1.3.

L1e — L7e

Tolerance of the measuring mechanism of the speedometer: …

6.10.1.4.

L1e — L7e

Technical constant of the speedometer: …

6.10.1.5.

L1e — L7e

Method of operation and description of the drive mechanism: …

6.10.1.6.

L1e — L7e

Overall transmission ratio of the drive mechanism: …

6.10.2.

 

Odometer

6.10.2.1.

L1e — L7e

Tolerance of the measuring mechanism of the odometer: …

6.10.2.2.

L1e — L7e

Method of operation and description of the drive mechanism: …

6.11.

 

Installation of lighting, light-signalling devices, including automatic switching of lighting

6.11.1.

L1e — L7e

List of all devices (mentioning the number, make(s),type, component type-approval mark(s), the maximum intensity of the main-beam headlamps, colour, the corresponding tell-tale): …

6.11.2.

L1e — L7e

Diagram showing the location of the lighting and light-signalling devices: …

6.11.3.

L1e — L7e

Hazard warning lamps: …

6.11.4.

L1e — L7e

Brief description of the electrical and/or electronic components used in the lighting system and in the light-signalling system: …

6.11.5.

L1e — L7e

For every lamp and reflector, supply the following information (in writing and/or by diagram):

6.11.5.1.

L1e — L7e

Drawing showing the extent of the illuminating surface: …

6.11.5.2.

L1e — L7e

Method used to define the apparent surface in accordance with point 2.10 of UNECE Regulation No 48 (OJ L 323, 6.12.2011, p. 46): …

6.11.5.3.

L1e — L7e

Axis of reference and centre of reference: …

6.11.5.4.

L1e — L7e

Method of operation of concealable lamps: …

6.11.6.

L1e — L7e

Description/drawing and type of headlamp levelling device (e.g. automatic, stepwise manually adjustable, continuously manually adjustable)(4): …

6.11.6.1.

L1e — L7e

Control device: …

6.11.6.2.

L1e — L7e

Reference marks: …

6.11.6.3.

L1e — L7e

Marks assigned for loading conditions: …

6.12.

 

Rearward visibility

6.12.1.

 

Rear-view mirrors (stating for each mirror)

6.12.1.1.

L1e — L7e

Drawing(s) for the identification of the mirror showing the position of the mirror relative to the vehicle structure: …

6.12.1.2.

L1e — L7e

Details of the method of attachment including that part of the vehicle structure to which it is attached: …

6.12.1.3.

L1e — L7e

A brief description of the electronic components of the adjustment system: …

6.12.2.

L1e — L7e

Devices for indirect vision other than mirrors

6.12.2.1.

L1e — L7e

Description of the device: …

6.12.2.2.

L1e — L7e

In the case of a camera-monitor device, the detection distance (mm), contrast, luminance range, glare correction, display performance (black and white/colour(4)), image repetition frequency, luminance reach of the monitor(4): …

6.12.2.3.

L1e — L7e

Sufficiently detailed drawings to identify the complete device, including installation instructions; the position for the EU type-approval mark has to be indicated on the drawings: …

6.13.

 

Rollover protective structure (ROPS)

6.13.1.

L7e-B2

Detailed technical description, position, fixing, etc. (including photographs or drawings): …

6.13.2.

 

ROPS by Frame(4)

6.13.2.1.

L7e-B2

Internal and external dimensions: …

6.13.2.2.

L7e-B2

Material(s) and method of construction: …

6.13.3.

 

ROPS by Cab (4)

6.13.3.1.

L7e-B2

Other weather protection arrangements (description): …

6.13.3.2.

L7e-B2

Internal and external dimensions: …

6.13.4.

 

ROPS by Roll bar(s) mounted at front/rear(4), fold-down/not fold down (4)

6.13.4.1.

L7e-B2

Dimensions: …

6.13.4.2.

L7e-B2

Material(s) and method of construction: …

6.14.

 

Safety belts and/or other restraints

6.14.1.

L2e, L4e, L5e-B, L6e-B, L7e

Number and position of safety belts and restraint systems and seats on which they can be used, please fill out table below:

(L = left side, R = right side, C = centre)

 

 

Safety belt configuration and associated information

 

 

 

Complete EU type-approval mark

Variant, if applicable

Belt adjustment device for height (indicate yes/no/optional)

First row of seats

 

L

 

 

 

C

 

 

 

R

 

 

 

Second row of seats

 

L

 

 

 

C

 

 

 

R

 

 

 

L = left, C= centre, R=right

6.14.2.

L2e, L4e, L5e-B, L6e-B, L7e

Description of a specific type of belt, with one anchorage attached to the seat back-rest or incorporating an energy-dissipation device: …

6.14.3.

L2e, L4e, L5e-B, L6e-B, L7e

Number and location of the anchorages: …

6.14.4.

L2e, L4e, L5e-B, L6e-B, L7e

Brief description of electrical/electronic components: …

6.15.

 

Safety belt anchorages

6.15.1.

L2e, L4e, L5e-B, L6e-B, L7e

Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: …

6.15.2.

L2e, L4e, L5e-B, L6e-B, L7e

Drawings of the anchorages and the parts of the vehicle structure to which they are attached (together with a statement on the nature of the materials used): …

6.15.3.

L2e, L4e, L5e-B, L6e-B, L7e

Designation of the types of belts(14) authorised for attachment to the anchorages on the vehicle: …

 

 

Safety-belt anchorage configuration and associated information

 

Anchorage location

Vehicle structure

Seat structure

First row of seats

 

 

Right-hand seat

 

Lower anchorages

Upper anchorages

 

outboard inboard

 

 

Centre seat

 

Lower anchorages

Upper anchorages

 

right left

 

 

Left-hand seat

 

Lower anchorages

Upper anchorages

 

outboard inboard

 

 

Second row of seats

 

 

Right-hand seat

 

Lower anchorages

Upper anchorages

 

outboard inboard

 

 

Centre seat

 

Lower anchorages

Upper anchorages

 

right left

 

 

Left-hand seat

 

Lower anchorages

Upper anchorages

 

outboard inboard

 

 

6.15.4.

L2e, L4e, L5e-B, L6e-B, L7e

Type-approval mark for each position: …

6.15.5.

L2e, L4e, L5e-B, L6e-B, L7e

Special devices (example: seat-height adjustment, preloading device, etc.): …

6.15.6.

L2e, L4e, L5e-B, L6e-B, L7e

Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: …

6.15.7.

L2e, L4e, L5e-B, L6e-B, L7e

Observation: …

6.16.

 

Seating positions (saddles and seats)

6.16.1.

L1e — L7e

Number of seating positions: …

6.16.1.1.

L2e, L5e, L6e, L7e

Location and arrangement(8): …

6.16.2.

L1e — L7e

Seating position configuration: seat/saddle(4)

6.16.3.

L1e — L7e

Description and drawings of:

6.16.3.1.

L1e — L7e

The seats and their anchorages: …

6.16.3.2.

L1e — L7e

The adjustment system: …

6.16.3.3.

L1e — L7e

The displacement and locking systems: …

6.16.3.4.

L1e — L7e

The seat-belt anchorages incorporated in the seat structure: …

6.16.3.5.

L1e — L7e

The parts of the vehicle used as anchorages: …

6.16.4.

L2e, L4e, L5e-B, L6e-B, L7e

Coordinates or drawing of the R-point(s) of all seating positions: …

6.16.4.1.

L2e, L4e, L5e-B, L6e-B, L7e

Driver’s seat: …

6.16.4.2.

L2e, L4e, L5e-B, L6e-B, L7e

All other seating positions: …

6.16.5.

L1e — L7e

Design torso angle: …

6.16.5.1.

L1e — L7e

Driver’s seat: …

6.16.5.2.

L1e — L7e

All other seating positions: …

6.16.6.

L1e — L7e

Range of seat adjustment: …

6.16.6.1.

L1e — L7e

Driver’s seat: …

6.16.6.2.

L1e — L7e

All other seating positions: …

6.17.

 

Steer-ability, cornering properties and turn-ability

6.17.1.

L1e — L7e

Schematic diagram of steered axle(s) showing steering geometry: …

6.17.2.

 

Transmission and control of steering

6.17.2.1.

L1e — L7e

Configuration of steering transmission (specify for front and rear): …

6.17.2.2.

L1e — L7e

Linkage to wheels (including other than mechanical means; specify for front and rear): …

6.17.2.2.1.

L1e — L7e

A brief description of the electrical/electronic components: …

6.17.2.3.

L1e — L7e

Diagram of the steering transmission: …

6.17.2.4.

L2e, L5e, L6e, L7e

Schematic diagram(s) of the steering control(s): …

6.17.2.5.

L2e, L5e, L6e, L7e

Range and method of adjustment of the steering control(s): …

6.17.2.6.

L2e, L5e, L6e, L7e

Method of assistance: …

6.17.3.

 

Maximum steering angle of the wheels

6.17.3.1.

L1e — L7e

To the right: … degrees; number of turns of the steering wheel (or equivalent data): …

6.17.3.2.

L1e — L7e

To the left: … degrees; number of turns of the steering wheel (or equivalent data): …

6.18.

 

Tyres/wheels combination

6.18.1.

 

Tyres:

6.18.1.1.

 

Size designation

6.18.1.1.1.

L1e — L7e

Axle 1: …

6.18.1.1.2.

L1e — L7e

Axle 2: …

6.18.1.1.3.

L4e

Sidecar wheel: …

6.18.1.2.

L1e — L7e

Minimum load-capacity index: … with the maximum load on each tyre: … Kg

6.18.1.3.

L1e — L7e

Minimum-speed category symbol compatible with the theoretical maximum design vehicle speed: …

6.18.1.4.

L1e — L7e

Tyre pressure(s) as recommended by the vehicle manufacturer: … kPa

6.18.2.

 

Wheels:

6.18.2.1.

L1e — L7e

Rim size(s): …

6.18.2.2.

L1e — L7e

Categories of use compatible with the vehicle: …

6.18.2.3.

L1e — L7e

Nominal rolling circumference: …

6.19.

 

Vehicle maximum speed limitation plate and its location on the vehicle

6.19.1.

L7e-B1 and L7e-B2

Maximum speed limitation plate (indicate the reflecting material used; drawings and photos may be used as appropriate): …

6.19.2.

L7e-B1 and L7e-B2

Location of maximum speed limitation plate (indicate variants where necessary; drawings and photos may be used as appropriate): …

6.19.3.

L7e-B1 and L7e-B2

Height above road surface, upper edge: … mm

6.19.4.

L7e-B1 and L7e-B2

Height above road surface, lower edge: … mm

6.19.5.

L7e-B1 and L7e-B2

Distance of the centre line from the longitudinal median plane of the vehicle: … mm

6.19.6.

L7e-B1 and L7e-B2

Distance from the left vehicle edge: … mm

6.20.

 

Vehicle occupant protection, including interior fittings and vehicle doors

6.20.1.

 

Bodywork

6.20.1.1.

L2e, L5e-B, L6e-B, L7e

Materials used and methods of construction: …

6.20.2.

 

Occupant doors, latches and hinges

6.20.2.1.

L2e, L5e, L6e, L7e

Number of doors, and its configuration, dimensions and maximum angle of opening(5): …

6.20.2.2.

L2e, L5e, L6e, L7e

Drawing of latches and hinges and of their position in the doors: …

6.20.2.3.

L2e, L5e, L6e, L7e

Technical description of latches and hinges: …

6.20.2.4.

L2e, L5e, L6e, L7e

Details, including dimensions, of entrances, steps and necessary handles where applicable: …

6.20.3.

 

Interior protection for occupants

6.20.3.1.

L2e, L5e, L6e, L7e

Photographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: …

6.20.4.

 

Head restraints

6.20.4.1.

L2e, L5e, L6e, L7e

Head restraints: integrated/detachable/separate(4)

6.20.4.2.

L2e, L5e, L6e, L7e

Detailed description of the head restraint, specifying in particular the nature of the padding material or materials and, where applicable, the position and specifications of the braces and anchorage pieces for the type of seat for which approval is sought: …

6.20.4.3.

L2e, L5e, L6e, L7e

In the case of a ‘separate’ head restraint

6.20.4.3.1.

L2e, L5e, L6e, L7e

Detailed description of the structural zone to which the head restraint is intended to be fixed: …

6.20.4.3.2.

L2e, L5e, L6e, L7e

Scale drawings of the significant parts of the structure and the head restraint: …

6.21.

 

Maximum continuous total power and/or maximum vehicle speed limitation by design

6.21.1.

 

Propulsion and/or drive-train output governors

6.21.1.1.

L1e — L7e

Number (minimum two, exemption L3e-A3 and L4e-A3):

6.21.1.2.

L1e — L7e

How is the redundancy of governors ensured?: …

6.21.1.3.

L1e — L7e

Nominal cut-off point no 1: …

6.21.1.3.1.

L1e — L7e

Engine/motor/drive-train rotation speed at which cut-off starts under load: … min-1

6.21.1.3.2.

L1e — L7e

Maximum rotation speed at the minimum engine load: … min-1

6.21.1.4.

L1e — L7e

Nominal cut-off point no 2: …

6.21.1.4.1

L1e — L7e

Engine/motor/drive-train rotation speed at which cut-off starts under load(4): … min-1

6.21.1.4.2.

L1e — L7e

Maximum rotation speed at the minimum engine load: … min-1

6.21.1.5.

L1e — L7e

The stated purpose of governor(s): maximum design vehicle speed limitation/maximum power limitation/engine over-speed protection(4): …

7.

 

INFORMATION ON VEHICLE CONSTRUCTION

7.1.

 

Coupling devices and attachments

7.1.1.

L1e — L7e

L-category vehicle equipped with coupling device: yes/no/optional(4)

7.1.2.

L1e — L7e

Guidelines and information for consumers in all EU languages regarding the impact on the driveability of using a trailer with an L-category vehicle included in the owner's manual: yes/no(4)

7.1.3.

L1e — L7e

For coupling-device approved as separate technical unit: installation and operating instructions added to documentation: yes/no(4)

7.1.4.

L1e — L7e

Photographs and/or drawings showing the position and the construction of the coupling-devices: …

7.1.5.

L1e — L7e

Instructions for attaching the coupling-type to the vehicle and photographs or drawings of the fixing points on the vehicle as stated by the manufacturer; additional information, if the use of the coupling-type is restricted to certain variants or versions of the vehicle type: …

7.1.6.

L1e — L7e

Attachment points for a secondary coupling and/or breakaway cable (drawings and pictures may be used as appropriate): yes/no(4)

7.2.

 

Devices to prevent unauthorised use

7.2.1.

 

Protective device

7.2.1.1.

L1e — L7e

Summary description of protective device(s) used: …

7.2.2.

 

Vehicle immobiliser

7.2.2.1.

L1e — L7e

Technical description of the vehicle immobiliser and of the measures taken against inadvertent activation: …

7.2.3.

 

Alarm system

7.2.3.1.

L1e — L7e

Description of the alarm system and of the vehicle parts involved in its installation: …

7.2.3.2.

L1e — L7e

List of the main components comprising the alarm system: …

7.3.

 

Electromagnetic compatibility (EMC)

7.3.1.

L1e — L7e

Requirements under UNECE Regulation No 10 (OJ L 254, 20.9.2012, p. 1) are met with relevant documentation included in the information document: yes/no(4)

7.3.2.

L1e — L7e

Table or drawing of radio-interference control equipment: …

7.3.3.

L1e — L7e

Particulars of the nominal value of the direct-current resistance, and, in the case of resistive ignition cables, of their nominal resistance per metre: …

7.4.

 

External projections

7.4.1.

L1e — L7evehicles with bodywork

General arrangement (drawing or photographs accompanied if necessary by dimensional details and/or text) indicating the position of the attached sections and views, of any parts of the exterior surface which can be regarded as critical for external projections, for example, and where relevant: bumpers, floor line, door and window pillars, air-intake grilles, radiator grille, windscreen wipers, rain gutter channels, handles, slide rails, flaps, door hinges and locks, hooks, eyes, winches, decorative trim, badges, emblems and recesses and any other parts of the exterior surface which can be regarded as critical (e.g. lighting equipment): …

7.5.

 

Fuel storage

7.5.1.

 

Fuel tank(s)

7.5.1.1.

 

Main fuel tank(s)

7.5.1.1.1.

L1e — L7e

Maximum capacity: …

7.5.1.1.2.

L1e — L7e

Materials used: …

7.5.1.1.3.

L1e — L7e

Fuel tank inlet: restricted orifice/label(4)

7.5.1.2.

 

Reserve fuel tank(s)

7.5.1.2.1.

L1e — L7e

Maximum capacity: …

7.5.1.2.2.

L1e — L7e

Materials used: …

7.5.1.2.3.

L1e — L7e

Fuel tank inlet: restricted orifice/label(4)

7.5.1.3.

L1e — L7e

Drawing and technical description of the tank(s) with connections and lines of the breathing and venting system, locks, valves, fastening devices: …

7.5.1.4.

L1e — L7e

Drawing clearly showing the position of the tank(s) in the vehicle: …

7.5.1.5.

L1e — L7e

Drawing of the heat shield between tank and exhaust device: …

7.5.2.

 

Compressed natural gas (CNG) container(s)

7.5.2.1.

L1e — L7e

Applicable information document set out in UNECE regulation No 110 (10) as prescribed for vehicle category M1 shall supplement this information document with regards to the CNG tanks installed on the vehicle.

7.5.3.

L1e — L7e

Liquefied petroleum gas (LPG)container(s)

7.5.3.1.

L1e — L7e

Applicable information document set out in UNECE regulation No 67 (11) as prescribed for vehicle category M1 shall supplement this information document with regards to the LPG tanks installed on the vehicle.

7.6.

 

On-board diagnostics (OBD) functional requirements

7.6.1

 

On-board diagnostics system

7.6.1.1.

L1e — L7e

Stage I: yes/no(4) and/or

7.6.1.2.

L1e — L7e

Stage II: yes/no(4)

7.6.2.

 

OBD system general information

7.6.2.1.

L3e—L7e(10)

Written description and/or drawing of the malfunction indicator (MI): …

7.6.2.2.

L3e—L7e(10)

List and purpose of all components monitored by the OBD system: …

7.6.2.3.

L3e— L7e(10)

Written description (general working principles) for all OBD stage I circuit (open circuit, shorted low and high, rationality) and electronics (PCU/ECU internal and communication) diagnostics: …

7.6.2.4.

L3e—L7e(10)

Written description (general working principles) for all OBD stage I diagnostic functionality triggering any operating mode which significantly reduces engine torque in case of fault detection: …

7.6.2.5.

L3e— L7e(10)

Written description of the communication protocol(s) supported: …

7.6.2.6.

L3e—L7e(10)

Physical location of diagnostic-connector (add drawings and photographs): …

7.6.2.7.

L3e— L7e(10)

Written description in case of voluntary compliance with OBD stage II (general working principles):

7.6.2.7.1.

L3e — L7e(10)

Positive-ignition engines

7.6.2.7.1.1.

L3e — L7e(10)

Catalyst monitoring: …

7.6.2.7.1.2.

L3e — L7e(10)

Misfire detection: …

7.6.2.7.1.3.

L3e — L7e(10)

Oxygen sensor monitoring: …

7.6.2.7.1.4.

L3e — L7e(10)

Other components monitored by the OBD system: …

7.6.2.7.2.

L3e — L7e(10)

Compression-ignition engines

7.6.2.7.2.1.

L3e — L7e(10)

Catalyst monitoring: …

7.6.2.7.2.2.

L3e — L7e(10)

Particulate filter monitoring: …

7.6.2.7.2.3.

L3e — L7e(10)

Electronic fuelling system monitoring: …

7.6.2.7.2.4.

L3e — L7e(10)

deNOx system monitoring: …

7.6.2.7.2.5.

L3e — L7e(10)

Other components monitored by the OBD system: …

7.6.2.7.3

L3e — L7e(10)

Criteria for MI activation (fixed number of driving cycles or statistical method): …

7.6.2.7.4.

L3e — L7e(10)

List of all OBD output codes and formats used (with explanation of each): …

7.6.3.

 

OBD compatibility

The following additional information shall be provided by the vehicle manufacturer to enable the manufacture of OBD-compatible replacement or service parts, diagnostic tools and test equipment:

7.6.3.1.

L3e — L7e(10)

A comprehensive document describing all sensed components concerned with the strategy for fault detection and MI activation (fixed number of driving cycles or statistical method). This shall, include a list of relevant secondary sensed parameters for each component monitored by the OBD system. The document shall also list all OBD output codes and formats (with an explanation of each) used in association with individual emission-related powertrain components and individual non-emission-related components, where monitoring the component is used to determine MI activation. This shall contain, in particular, a comprehensive explanation for the data given in service $05 Test ID $ 21 to FF and the data given in service $06: …

7.6.3.2.

L3e — L7e(10)

For vehicle types using a communication link in accordance with ISO 15765-4 ‘Road vehicles, diagnostics on controller area network (CAN) — Part 4: requirements for emissions-related systems’, the manufacturer shall provide a comprehensive explanation for the data given in service $06 Test ID $00 to FF, for each OBD monitor ID supported: …

7.6.3.3.

L3e — L7e(10)

The information required above may be provided in table form as described below.

 

Example OBD fault-code overview list

Component

Fault code

Monitoring strategy

Fault detection criteria

MI activation criteria

Secondary parameters

Preconditioning

Demonstration test

Intake air temperature sensor open circuit

P0xxxxzz

Comparison with temperature model after cold start

> 20 degr difference between measured and modelled intake air temperature

3rd cycle

Coolant and intake air temperature sensor signals

Two type I cycles

Type I

7.6.3.4.

L3e — L7e(10)

Description of ETC diagnostic fault codes: …

7.6.4.

 

Communication protocol information

The following information shall be referenced to a specific vehicle make, model and variant, or identified using other workable definitions such as VIN or vehicle and systems identification:

7.6.4.1.

L3e — L7e(10)

Any protocol information system needed to enable complete diagnostics in addition to the standards prescribed in point 3.8. of Appendix 1 to Annex XII to Commission Delegated Regulation (EU) No 44/2014, such as additional hardware or software protocol information, parameter identification, transfer functions, ‘keep alive’ requirements, or error conditions;

7.6.4.2.

L3e — L7e(10)

Details of how to obtain and interpret all fault codes not in accordance with the standards prescribed in point 3.11. of Appendix 1 to Annex XII to Commission Delegated Regulation (EU) No 44/2014

7.6.4.3.

L3e — L7e(10)

A list of all available live data parameters including scaling and access information;

7.6.4.4.

L3e — L7e(10)

A list of all available functional tests including device activation or control and the means to implement them;

7.6.4.5.

L3e — L7e(10)

Details of how to obtain all component and status information, time stamps, pending DTC and freeze frames;

7.6.4.6.

L3e — L7e(10)

PCU/ECU identification and variant coding;

7.6.4.7.

L3e — L7e(10)

Details of how to reset service lights;

7.6.4.8.

L3e — L7e(10)

Location of diagnostic connector and connector details;

7.6.4.9.

L3e — L7e(10)

Engine code identification.

7.6.5.

 

Test and diagnosis of OBD monitored components

7.6.5.1.

L3e — L7e(10)

A description of tests to confirm its functionality, at the component or in the harness:

7.7.

 

Passenger handholds and footrests

7.7.1.

 

Handholds

7.7.1.1.

L1e — L7e

Configuration: strap and/or handle(4)

7.7.1.3.

L1e — L7e

Photographs and/or drawings showing the location and the construction:

7.7.2.

 

Footrests

7.7.2.1.

L1e — L7e

Photographs and/or drawings showing the location and the construction:

7.8.

 

Registration plate space

7.8.1.

L1e — L7e

Location of rear registration plate (indicate variants where necessary; drawings may be used as appropriate): …

7.8.1.1.

L1e — L7e

Height above road surface, upper edge: … mm

7.8.1.2.

L1e — L7e

Height above road surface, lower edge: … mm

7.8.1.3.

L1e — L7e

Distance of the centre line from the longitudinal median plane of the vehicle: … mm

7.8.1.4.

L1e — L7e

Dimensions (length x width): … mm x … mm

7.8.1.5.

L1e — L7e

Inclination of the plane to the vertical: … degr.

7.8.1.6.

L1e — L7e

Angle of visibility in the horizontal plane: … degr

7.9.

 

Stands

7.9.1.

L1e, L3e

Configuration: central and/or side(4): …

7.9.2.

L1e, L3e

Construction material used: …

7.9.3.

L1e, L3e

Photographs and drawings showing the location of the stand(s) in relation to the structure of the vehicle: …

7.9.4.

L1e, L3e

Description of the method to prevent contact of the stand with the ground when the vehicle is being propelled: …


(1)  OJ L 7, 10.1.2014, p. 1.

(2)  OJ L 25, 28.1.2014, p. 1.

(3)  Commission Delegated Regulation (EU) No 134/2014 of 16 December 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to environmental and propulsion unit performance requirements and amending Annex V thereof (OJ L 53, 21.2.2014, p. 1).

(4)  Contracting parties to the Revised 1958 Agreement.

(5)  To be indicated if not obtainable from the type-approval number.

(6)  The approval authority shall complete the references for the test reports, established by regulatory acts, for which no type-approval certificate is available.

(7)  OJ L 72, 14.3.2008, p. 1.

(8)  OJ L 120, 7.5.2011, p. 1.

(9)  Regulation (EC) No 79/2009 of the European Parliament and of the Council of 14 January 2009 on type-approval of hydrogen-powered motor vehicles, and amending Directive 2007/46/EC (OJ L 35, 4.2.2009, p. 32).

(10)  OJ L 120, 7.5.2011, p. 1.

(11)  OJ L 72, 14.3.2008, p. 1.

(12)  

(+)

Continuously variable transmission.

(13)  

(+)

x

=

yes

-

=

no or not separately available

o

=

optional.

(14)  

(++)

d

=

directly on control, indicator or tell-tale

c

=

in close vicinity.

(15)  

(+)

x

=

yes

-

=

no or not separately available

o

=

optional.

(16)  

(++)

d

=

directly on control, indicator or tell-tale

c

=

in close vicinity.

Appendix 1

Model information document relating to EU type-approval of a type of/ a type of a vehicle with regard to(4) a tailpipe pollution-control system

Item No

(Sub) categories

Detailed information

B.

 

General information concerning systems, components or separate technical units

0.7.

L1e — L7e

Make(s) (trade name(s) of manufacturer): …

0.8.

L1e — L7e

Type: …

0.8.1.

L1e — L7e

Commercial name(s) (if available): …

0.8.2.

L1e — L7e

Type-approval number(s) (if available): …

0.8.3.

L1e — L7e

Type-approval(s) issued on (date, if available): …

0.9.

L1e — L7e

Company name and address of manufacturer: …

0.9.1.

L1e — L7e

Name(s) and address(es) of assembly plants: …

0.9.2.

L1e — L7e

Name and address of manufacturer’s authorised representative, if any: …

0.10.

 

Vehicle(s) for which the system/separate technical unit is intended for(21) :

0.10.1.

L1e — L7e

Type(17): …

0.10.2.

L1e — L7e

Variant(17): …

0.10.3.

L1e — L7e

Version(17): …

0.10.4.

L1e — L7e

Commercial name(s) (if available): …

0.10.5.

L1e — L7e

Category, subcategory and sub-subcategory of vehicle(2): …

0.11.

L1e — L7e

Type-approval marks for components and separate technical units(19) : …

0.11.1.

L1e — L7e

Method of attachment: …