Access to European Union law
<a href="https://eur-lex.europa.eu/content/help/eurlex-content/experimental-features.html" target="_blank">More about the experimental features corner</a>
Choose the experimental features you want to try
EUR-Lex
Access to European Union law

This document is an excerpt from the EUR-Lex website

You are here
Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search

Document 32017R0065

Commission Implementing Regulation (EU) 2017/65 of 14 December 2016 concerning the authorisation of 1-isopropyl-4-methylbenzene, pin-2(10)-ene, pin-2(3)-ene, beta-caryophyllene, camphene, 1-isopropenyl-4-methylbenzene, delta-3-carene and d-limonene as feed additives for all animal species (Text with EEA relevance. )

C/2016/8247

OJ L 13, 17.1.2017, pp. 246–258 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

Legal status of the document In force

ELI: http://data.europa.eu/eli/reg_impl/2017/65/oj

Date of document:
14/12/2016; Date of adoption
Date of effect:
06/02/2017; Entry into force Date pub. +20 See Art 3
Date of end of validity:
No end date
Author:
European Commission
Form:
Implementing regulation
Additional information:
EEA relevance
Treaty:
Treaty on the Functioning of the European Union
Legal basis:
Link
Link
Link
Select all documents mentioning this document
Instruments cited:
Link

17.1.2017   

EN

Official Journal of the European Union

L 13/246

COMMISSION IMPLEMENTING REGULATION (EU) 2017/65

of 14 December 2016

concerning the authorisation of 1-isopropyl-4-methylbenzene, pin-2(10)-ene, pin-2(3)-ene, beta-caryophyllene, camphene, 1-isopropenyl-4-methylbenzene, delta-3-carene and d-limonene as feed additives for all animal species

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition (1), and in particular Article 9(2) thereof,

Whereas:

(1)

Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10 of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EEC (2).

(2)

1-Isopropyl-4-methylbenzene, pin-2(10)-ene, pin-2(3)-ene, beta-caryophyllene, camphene, 1-isopropenyl-4-methylbenzene, delta-3-carene and d-limonene, were authorised without a time limit in accordance with Directive 70/524/EEC as feed additives for all animal species. Those products were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1) of Regulation (EC) No 1831/2003.

(3)

In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of 1-isopropyl-4-methylbenzene, pin-2(10)-ene, pin-2(3)-ene, beta-caryophyllene, camphene, 1-isopropenyl-4-methylbenzene, delta-3-carene and d-limonene as feed additives for all animal species. The applicant requested those additives to be classified in the additive category ‘sensory additives’. That application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.

(4)

The European Food Safety Authority (‘the Authority’) concluded in its opinions (3) of 10 March 2015 and of 1 December 2015 that, under the proposed conditions of use in feed 1-isopropyl-4-methylbenzene, pin-2(10)-ene, pin-2(3)-ene, beta-caryophyllene, camphene, 1-isopropenyl-4-methylbenzene, delta-3-carene and d-limonene do not have adverse effects on animal health, human health or the environment. The Authority further concluded that the function of 1-isopropyl-4-methylbenzene, pin-2(10)-ene, pin-2(3)-ene, beta-caryophyllene, camphene, 1-isopropenyl-4-methylbenzene, delta-3-carene and d-limonene in feed is similar to that on food. The Authority has already concluded that for food 1-isopropyl-4-methylbenzene, pin-2(10)-ene, pin-2(3)-ene, beta-caryophyllene, camphene, 1-isopropenyl-4-methylbenzene, delta-3-carene and d-limonene are efficacious, as it increases the food smell or palatability. The Authority could not conclude on the safety of for pin-2(3)-ene, pin-2(10)-ene, delta-3-carene, beta-caryophyllene and camphene used in water for drinking. The Authority concluded that for d-limonene, 1-isopropyl-4-methylbenzene and 1-isopropenyl-4-methylbenzene the absence of margin of safety would not allow simultaneous administration in feed and water. However, those substances can be used within a compound feed subsequently administered via water.

(5)

Restrictions and conditions should be provided for to allow better control. For practical reasons and taking into account the re-evaluation performed by the Authority, maximum recommended contents should be set up. Where the recommended content of the additive in complete feedingstuff is exceeded, the identification number of the feed additive, its name and added amount should be indicated on the label of premixtures, compound feeds and feed materials.

(6)

The Authority concluded that in the absence of data on user safety 1-Isopropyl- 4-methylbenzene, pin-2(10)-ene, pin-2(3)-ene, beta-caryophyllene, camphene, 1-isopropenyl-4-methylbenzene, delta-3-carene and d-limonene should be considered as irritant to skin, eyes and respiratory tract and as a skin sensitiser. Consequently, appropriate protective measures should be taken. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.

(7)

The assessment of the substances concerned shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of those substances should be authorised as specified in the Annex to this Regulation.

(8)

Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation for 1-isopropyl- 4-methylbenzene, pin-2(10)-ene, pin-2(3)-ene, beta-caryophyllene, camphene, 1-isopropenyl-4-methylbenzene, delta-3-carene and d-limonene it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.

(9)

The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,

HAS ADOPTED THIS REGULATION:

Article 1

Authorisation

The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.

Article 2

Transitional measures

1.   The substances as specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.

2.   Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.

3.   Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.

Article 3

Entry into force

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 14 December 2016.

For the Commission

The President

Jean-Claude JUNCKER

(1)   OJ L 268, 18.10.2003, p. 29.

(2)  Council Directive 70/524/EEC of 23 November 1970 concerning additives in feedingstuffs (OJ L 270, 14.12.1970, p. 1).

(3)   EFSA Journal 2015;13(3):4053 and EFSA Journal 2016;14(1):4339

ANNEX

Identification number of the additive

Name of the holder of authorisation

Additive

Composition, chemical formula, description, analytical method

Species or category of animal

Maximum age

Minimum content

Maximum content

Other provisions

End of period of authorisation

mg of active substance/kg of complete feedingstuff with a moisture content of 12 %

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

Category: Sensory additives. Functional group: Flavouring compounds

2b01002

—

1-Isopropyl-4-methylbenzene

Additive composition

1-Isopropyl-4-methylbenzene

Characterisation of the active substance

1-Isopropyl-4-methylbenzene

Produced by chemical synthesis

Purity: min 97 %

C10H14

CAS No 99¬87-6

FLAVIS No: 01.002

Method of analysis  (1)

For the determination of 1-isopropyl-4-methylbenzene in the feed additive and in feed flavouring premixtures:

Gas-chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be:

For cats: 14 mg/kg, and for other species and categories: 25 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:

—

14 mg/kg for cats;

—

25 mg/kg for other species and categories.’

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

—

14 mg/kg for cats;

—

25 mg/kg for other species and categories.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

6 February 2027

2b01003

—

Pin-2(10)-ene

Additive composition

Pin-2(10)-ene

Characterisation of the active substance

Pin-2(10)-ene

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C10H16

CAS No 127-91-3

FLAVIS No: 01.003

Method of analysis  (1)

For the determination of pin-2(10)-ene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

6 February 2027

2b01004

—

Pin-2(3)-ene

Additive composition

Pin-2(3)-ene

Characterisation of the active substance

Pin-2(3)-ene

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C10H16

CAS No 80-56-8

FLAVIS No: 01.004

Method of analysis  (1)

For the determination of pin-2(3)-ene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

6 February 2027

2b01007

—

beta-caryophyllene

Additive composition

beta-caryophyllene

Characterisation of the active substance

beta-caryophyllene

Produced by chemical synthesis

Purity: min. 80 %

Chemical formula: C15H24

CAS No 87-44-5

FLAVIS No: 01.007

Method of analysis  (1)

For the determination of beta-caryophyllene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

6 February 2027

2b01009

—

Camphene

Additive composition

Camphene

Characterisation of the active substance

Camphene

Produced by chemical synthesis

Purity: min. 80 %

Chemical formula: C10H16

CAS No 79-92-5

FLAVIS No: 01.009

Method of analysis  (1)

For the determination of camphene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

6 February 2027

2b01010

—

1-Isopropenyl-4-methylbenzene

Additive composition

1-Isopropenyl-4-methylbenzene

Characterisation of the active substance

1-Isopropenyl-4-methylbenzene

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C10H12

CAS No 1195-32-0

FLAVIS No:01.010

Method of analysis  (1)

For the determination of 1-Isopropenyl-4-methylbenzene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be:

for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:

—

1 mg/kg for pigs and poultry;

—

1,5 mg/kg for other species and categories.’

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

—

1 mg/kg for pigs and poultry;

—

1,5 mg/kg for other species and categories.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

6 February 2027

2b01029

—

delta-3-Carene

Additive composition

delta-3-Carene

Characterisation of the active substance

delta-3-Carene

Produced by chemical synthesis

Purity: min. 92 %

Chemical formula: C10H16

CAS No 13466-78-9

FLAVIS No:01.029

Method of analysis  (1)

For the determination of delta-3-Carene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

6 February 2027

2b01045

—

d-Limonene

Additive composition

d-Limonene

Characterisation of the active substance

d-Limonene

Produced by chemical synthesis

Purity: min. 96 %

Chemical formula: C10H16

CAS No 5989-27-5

FLAVIS No: 01.045

Method of analysis  (1)

For the determination of d-limonene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species except male rats

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

6 February 2027

(1)  Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports

Top