Back to EUR-Lex homepage

EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search
You are here

Document 32012R1183

Commission Regulation (EU) No 1183/2012 of 30 November 2012 amending and correcting Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food Text with EEA relevance

OJ L 338, 12.12.2012, p. 11–15 (BG, ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
Special edition in Croatian: Chapter 13 Volume 060 P. 228 - 232

Legal status of the document In force: This act has been changed. Current consolidated version: 01/01/2013

ELI: http://data.europa.eu/eli/reg/2012/1183/oj

Date of document:
30/11/2012
Date of effect:
01/01/2013; Entry into force Date pub. +20 See Art 3
Date of end of validity:
No end date
Author:
European Commission
Form:
Regulation
Additional information:
EEA relevance
Treaty:
Treaty on the Functioning of the European Union
Legal basis:
Link
Link
Link
Select all documents mentioning this document
Modifies:
Relation Act Comment Subdivision concerned From To
Modifies 32011R0010 Amendment annex I 01/01/2013
Modified by:
Relation Act Comment Subdivision concerned From To
Corrected by 32012R1183R(01) (EN)
Corrected by 32012R1183R(02) (SL)
Instruments cited:
Link

12.12.2012   

EN

Official Journal of the European Union

L 338/11

COMMISSION REGULATION (EU) No 1183/2012

of 30 November 2012

amending and correcting Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October 2004 on materials and articles intended to come into contact with food and repealing Directives 80/590/EEC and 89/109/EEC (1), and in particular points (a) and (e) of Article 5(1), and Articles 11(3) and 12(6) thereof,

Whereas:

(1)

Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food (2) establishes a Union list of monomers, other starting substances and additives which may be used in the manufacture of plastic materials and articles. Recently the European Food Safety Authority (the Authority) issued favourable scientific evaluations for additional substances which should now be added to the current list.

(2)

For certain other substances, the restrictions and/or specifications already established at the EU level should be amended on the basis of a new favourable scientific evaluation by the Authority.

(3)

Annex I to Regulation (EU) No 10/2011 should therefore be amended accordingly.

(4)

The substance with FCM Substance Number 257 and the name dipropyleneglycol is authorised to be used as an additive in plastics in Table 1 of Annex I to Regulation (EU) No 10/2011 and listed with the CAS No 0000110-98-5. In Commission Directive 2002/72/EC of 6 August 2002 relating to plastic materials and articles intended to come into contact with foodstuffs (3) this substance was referred to by CAS No 0025265-71-8. That reference was deleted upon the entry into force of Regulation (EU) No 10/2011, replacing Directive 2002/72/EC, because it was considered superfluous. However, taking into account that CAS No 0025265-71-8 refers to the commercially used mixture of isomers rather than to the pure substance, it should be reinserted in Regulation (EU) No 10/2011. CAS No 0000110-98-5 should remain in Table 1.

(5)

Compliance Note No (4) in Table 3 of Annex I to Regulation (EU) No 10/2011 gives an ambiguous reference to simulant D, where a reference to simulant D2 is intended. Therefore, Note No (4) should refer to simulant D2.

(6)

Annex I to Regulation (EU) No 10/2011 should therefore be corrected accordingly.

(7)

In order to limit the administrative burden to business operators, plastic materials and articles which have been lawfully placed on the market based on the requirements set out in Regulation (EU) No 10/2011 and which do not comply with this Regulation should be able to be placed on the market until one year after entry into force of this Regulation. They should be able to remain on the market until exhaustion of stocks.

(8)

The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on the Food Chain and Animal Health, and neither the European Parliament nor the Council has opposed them,

HAS ADOPTED THIS REGULATION:

Article 1

Annex I to Regulation (EU) No 10/2011 is amended in accordance with the Annex to this Regulation.

Article 2

Plastic materials and articles which have been lawfully placed on the market before 1 January 2013 and which do not comply with this Regulation may continue to be placed on the market until 1 January 2014. Those plastic materials and articles may remain on the market until the exhaustion of stocks.

Article 3

This Regulation shall enter into force on the twentieth day following its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 30 November 2012.

For the Commission

The President

José Manuel BARROSO

(1)   OJ L 338, 13.11.2004, p. 4.

(2)   OJ L 12, 15.1.2011, p. 1.

(3)   OJ L 220, 15.8.2002, p. 18.

ANNEX

Annex I to Regulation (EU) No 10/2011 is amended as follows:

(1)

in Table 1 for the following substance, the content of column (3) is replaced by the following:

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

257

13550

0000110-98-5

dipropyleneglycol

yes

yes

no

 

 

 

 

16660

0025265-71-8

51760

 

(2)

in Table 1 for the following substance, the content of column (8) is replaced by the following:

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

449

49840

0002500-88-1

dioctadecyl disulphide

yes

no

yes

0,05

 

 

 

(3)

in Table 1 for the following substance, the content of columns (8) and (9) is replaced by the following:

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

180

17160

0000097-53-0

eugenol

no

yes

no

 

(33)

 

 

(4)

in Table 1 for the following substances, the content of column (10) is replaced by the following:

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

807

93485

—

titanium nitride, nanoparticles

yes

no

no

 

 

No migration of titanium nitride nanoparticles.

Only to be used in polyethylene terephthalate (PET) up to 20 mg/kg.

In the PET, the agglomerates have a diameter of 100-500 nm consisting of primary titanium nitride nanoparticles; primary particles have a diameter of approximately 20 nm.

 

865

40619

0025322-99-0

(butyl acrylate, methyl methacrylate, butyl methacrylate) copolymer

yes

no

no

 

 

Only to be used in:

(a)

rigid poly(vinyl chloride) (PVC) at a maximum level of 1 % w/w;

(b)

polylactic acid (PLA) at a maximum level of 5 % w/w.

 

868

53245

0009010-88-2

(ethyl acrylate, methyl methacrylate) copolymer

yes

no

no

 

 

Only to be used in:

(a)

rigid poly(vinyl chloride) (PVC) at a maximum level of 2 % w/w;

(b)

polylactic acid (PLA) at a maximum level of 5 % w/w;

(c)

polyethylene terephthalate (PET) at a maximum level of 5 % w/w.

 

(5)

in Table 1 the following lines are inserted in numerical order of the FCM Substance numbers:

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

858

38565

0090498-90-1

3,9-bis[2-(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionyloxy)-1,1-dimethylethyl]-2,4,8,10-tetraoxaspiro[5,5]undecane

yes

no

yes

0,05

 

SML expressed as the sum of the substance and its oxidation product 3-[(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)prop-2-enoyloxy)-1,1-dimethylethyl]-9-[(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionyloxy)-1,1-dimethylethyl]-2,4,8,10-tetraoxaspiro[5,5]-undecane in equilibrium with its paragraph quinone methid tautomer.

(2)

874

16265

0156065-00-8

α-dimethyl-3-(4’-hydroxy-3’-methoxyphenyl)propylsilyloxy, ω-3-dimethyl-3-(4’-hydroxy-3’-methoxyphenyl)propylsilyl polydimethylsiloxane

no

yes

no

0,05

(33)

Only to be used as comonomer in siloxane modified polycarbonate.

The oligomeric mixture shall be characterised by the formula

C24H38Si2O5(SiOC2H6)n (50 > n ≥ 26).

 

902

 

0000128-44-9

1,2-benzisothiazol-3(2H)-one 1,1-dioxide, sodium salt

yes

no

no

 

 

The substance shall comply with the specific purity criteria as set out in Commission Regulation (EU) No 231/2012 (1).

 

979

79987

—

(polyethylene terephthalate, hydroxylated polybutadiene, pyromellitic anhydride) copolymer

yes

no

no

 

 

Only to be used in polyethylene terephthalate (PET) at a maximum level of 5 % w/w.

 

(6)

in Table 2 the following line is inserted in numerical order of the group restriction numbers:

(1)

(2)

(3)

(4)

Group Restriction No

FCM substance No

SML (T) [mg/kg]

Group restriction specification

33

180

874

ND

expressed as eugenol

(7)

in Table 3 on verification of compliance the content of Note No (4) is replaced by the following:

(1)

(2)

Note No

Note on verification of compliance

(4)

Compliance testing when there is a fat contact should be performed using saturated fatty food simulants as simulant D2.

(1)   OJ L 83, 22.3.2012, p. 1.

Top