EUROPEAN COMMISSION
Brussels, 22.5.2017
COM(2017) 245 final
2017/0098(NLE)
Proposal for a
COUNCIL REGULATION
amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Need more search options? Use the
Advanced search
You are here
Document 52017PC0245
Proposal for a COUNCIL REGULATION amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
Proposal for a COUNCIL REGULATION amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
Proposal for a COUNCIL REGULATION amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
COM/2017/0245 final - 2017/098 (NLE)
Language
HTML
DOC
PDF
EXPLANATORY MEMORANDUM
1.CONTEXT OF THE PROPOSAL
•Reasons for and objectives of the proposal
Certain agricultural and industrial products are not produced in the European Union, or not in sufficient quantity. To ensure sufficient and uninterrupted supplies and to prevent market disturbance for these products, Council Regulation (EU) No 1387/2013 partially or totally suspended some autonomous Common Customs Tariff duties.
The Regulation is updated every six months to accommodate the needs of EU industry. The Commission, assisted by the Economic Tariff Questions Group (ETQG), reviews all Member State requests for autonomous Common Customs Tariff duties to be suspended temporarily.
Following this review, the Commission considers that a suspension of duties is justified for some new products currently not listed in the Annex to the Regulation. The conditions governing the description, classification or end-use requirement of some other products should be changed. Products for which a tariff suspension is no longer in the EU’s economic interest should be withdrawn.
•Consistency with existing policy provisions in the policy area
This proposal does not affect countries that have a preferential trading agreement with the EU, candidate countries or potential candidates for preferential agreements with the EU (e.g. the Generalised System of Preferences, the African, Caribbean and Pacific group trading arrangements, or free-trade agreements).
•Consistency with other Union policies
The proposal is in line with EU policies on agriculture, trade, enterprise, development and external relations.
2.LEGAL BASIS, SUBSIDIARITY AND PROPORTIONALITY
•Legal basis
The legal basis of this proposal is Article 31 of the Treaty on the Functioning of the European Union (TFEU).
•Subsidiarity (for non-exclusive competence)
The proposal falls under the EU’s exclusive competence. The subsidiarity principle therefore does not apply.
•Proportionality
The proposal complies with the principle of proportionality. The measures envisaged are in line with the principles for simplifying procedures for operators engaged in foreign trade, as stated in the Commission Communication concerning autonomous tariff suspensions and quotas. This Regulation does not go beyond what is necessary to achieve the objectives pursued in accordance with Article 5(4) of the Treaty on European Union (TEU).
•Choice of the instrument
By virtue of Article 31 of the TFEU, "Common Customs Tariff duties shall be fixed by the Council on a proposal from the Commission". Therefore, a regulation is the appropriate instrument.
3.RESULTS OF EX-POST EVALUATIONS, STAKEHOLDER CONSULTATIONS AND IMPACT ASSESSMENTS
•Ex-post evaluations/fitness checks of existing legislation
A 2013 evaluation of the entire autonomous suspensions scheme concluded that the core rationale for the scheme remains valid. The cost savings for EU businesses importing goods under the scheme can be significant. In turn, depending on the product, company and sector, those savings can have wider benefits, such as boosting competitiveness, making production methods more efficient, and creating and keeping jobs in the EU.
•Stakeholder consultations
The ETQG, brings together delegates from all Member States plus Turkey, assisted the Commission to prepare this proposal. The group met three times before agreeing the changes in this proposal.
It carefully assessed each request (new, or for an amendment). It focused especially on the need to prevent any harm to EU producers, and to strengthen and consolidate the competitiveness of EU production.
All listed suspensions were the subject of agreements or compromises reached in the ETQG’s discussions. No potentially serious risks with irreversible consequences were mentioned.
•Impact assessment
The proposed amendment is technical and concerns only the coverage of suspensions listed in the Annex to Council Regulation (EU) No 1387/2013. Therefore, no impact assessment has been carried out for this proposal.
•Fundamental rights
The proposal has no impact on fundamental rights.
4.BUDGETARY IMPLICATIONS
This proposal has no financial impact on expenditure but has a financial impact on revenue. Uncollected customs duties total approximately EUR 16,4 million per year. The effect on the budget’s traditional own resources is EUR 13,1 million per year (i.e. 80 % of the total). The legislative financial statement sets out the budgetary implications of this proposal in greater detail.
The loss of revenue in traditional own resources shall be compensated by Member States’ Gross National Income (GNI) based own resource contributions.
5.OTHER ELEMENTS
•Implementation plans and monitoring, evaluation and reporting arrangements
The measures proposed are managed under TARIC (the Integrated Tariff of the European Union) and applied by Member States’ customs administrations.
2017/0098 (NLE)
Proposal for a
COUNCIL REGULATION
amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:
(1)The Union production of 69 agricultural and industrial products that are not listed in the Annex to Council Regulation (EU) No 1387/2013 1 is inadequate or non-existent. It is, therefore, in the interest of the Union to suspend completely the autonomous Common Customs Tariff ('CCT') duties on those products.
(2)It is necessary to modify the conditions for 71 suspensions of autonomous CCT duties listed in the Annex to Regulation (EU) No 1387/2013 to take account of technical product developments and economic trends on the market. Certain product classifications have been amended to allow industry to fully benefit from the suspensions in force. Moreover, the Annex to Regulation (EU) No 1387/2013 has been updated due to the need to align or clarify texts in some cases. The modified conditions relate to changes in the product description, classification or end-use requirements. The suspensions in respect to which modifications are necessary should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1387/2013 and the modified suspensions should be inserted into that list.
(3)It is no longer in the interest of the Union to maintain the suspension of autonomous CCT duties for 2 products currently listed in the Annex to Regulation (EU) No 1387/2013.
(4)In the interests of clarity, the entries modified by this Regulation should be marked with an asterisk.
(5)Regulation (EU) No 1387/2013 should therefore be amended accordingly.
(6)To avoid any interruption of the application of autonomous suspensions scheme and to comply with the rules set in the Communication from the Commission concerning autonomous tariff suspensions and quotas 2 the changes regarding the suspensions for the products concerned provided for in this Regulation have to apply from 1 July 2017. Therefore, this Regulation should enter into force as a matter of urgency,
HAS ADOPTED THIS REGULATION:
Article 1
The Annex to Regulation (EU) No 1387/2013 is amended as follows:
(1) the rows for the products listed in Annex I to this Regulation are inserted following the order of the CN codes indicated in the first column of the table in the Annex to Regulation (EU) No 1387/2013;
(2) the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted from the Annex to Regulation (EU) No 1387/2013.
Article 2
This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.
It shall apply from 1 July 2017.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels,
For the Council
The President
LEGISLATIVE FINANCIAL STATEMENT
1. NAME OF THE PROPOSAL
Council Regulation amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
2. BUDGET LINES
Chapter and Article: Chapter 12, Article 120
Amount budgeted for the year 2017: EUR 20 000 500 000 (B 2017)
3. FINANCIAL IMPACT
◻ Proposal has no financial implications
X Proposal has no financial impact on expenditure but has a financial impact on revenue. The effect is as follows:
(EUR million to one decimal place 3 )
This Annex contains 69 new products. The corresponding uncollected duties, calculated on the basis of requesting Member State projections for the period 2017 to 2021, amount to EUR 9.4 million per year.
However, statistics for previous years point to the need to increase this amount by an average factor, estimated at 1.8, to take account of imports into other Member States using the same suspensions. This will result in uncollected duties of around EUR 16.9 million per year.
Two products have been withdrawn from the Annex, reflecting the reintroduction of customs duties. This will increase the duties collected by EUR 0.5 million. Both products were withdrawn from 1 January 2017; therefore, statistics are not available and the increase has been calculated using requesting Member State projections.
On the basis of the above, the impact that this Regulation will have on the EU budget in terms of the loss of revenue for is estimated at EUR 16,4 million (EUR 16,9 – 0,5 million). Multiplying this gross amount, including collection costs, by a factor of 0,8 gives a total of EUR 13,1 million per year for the period running from 1 July 2017 to 31 December 2021.
4. ANTI-FRAUD MEASURES
Checks on the end-use of some of the products covered by this Council Regulation will be carried out in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code.
- (1) Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201).
- (2) OJ C 363, 13.12.2011, p. 6.
- (3) The annual amounts should be estimated using the formula in section 5, with a footnote to that effect, e.g. ‘indicative amount based on the agreed formula’. For the first year, the annual amount is normally paid without a reduction or pro rata.
- (4) As regards traditional own resources (agricultural duties, sugar levies, customs duties), the amounts indicated must be net amounts, i.e. gross amounts minus a 20 % deduction for collection costs.
EUROPEAN COMMISSION
Brussels, 22.5.2017
COM(2017) 245 final
ANNEXES
[…]
to the
Proposal for a COUNCIL REGULATION
amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
ANNEX I
|
CN code |
TARIC |
Description |
Rate of autonomous duty |
Supplementary Unit |
Date foreseen for mandatory review |
|
*ex 2818 30 00 |
30 |
Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6) |
0 % |
- |
31.12.2018 |
|
ex 2825 70 00 |
20 |
Molybdic Acid (CAS RN 7782-91-4) |
0 % |
- |
31.12.2021 |
|
*ex 2842 10 00 |
40 |
Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations (1) |
0 % |
- |
31.12.2021 |
|
*ex 2905 11 00 ex 2905 19 00 |
20 35 |
Methyl methanesulphonate (CAS RN 66-27-3) |
0 % |
- |
31.12.2021 |
|
ex 2905 22 00 |
20 |
3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9) |
0 % |
- |
31.12.2021 |
|
ex 2909 30 90 |
15 |
{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)
|
0 % |
- |
31.12.2021 |
|
ex 2909 30 90 |
25 |
1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane |
0 % |
- |
31.12.2021 |
|
*ex 2909 60 00 |
40 |
1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 2781-00-2) or mixture of isomers 1,4-Di(2-tert-butylperoxyisopropyl)benzene and 1,3-di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3) |
0 % |
- |
31.12.2017 |
|
ex 2912 19 00 |
10 |
Undecanal (CAS RN 112-44-7) |
0 % |
- |
31.12.2021 |
|
ex 2915 12 00 |
10 |
Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1) |
0 % |
- |
31.12.2021 |
|
*ex 2916 14 00 |
30 |
Allyl methacrylate (CAS RN 96-05-9) and its’ isomers with a purity by weight of 98 % or more and containing at least:
|
0 % |
- |
31.12.2020 |
|
ex 2916 39 90 |
33 |
Methyl 4'-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2) |
0 % |
- |
31.12.2021 |
|
ex 2916 39 90 |
73 |
(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5) |
0 % |
- |
31.12.2021 |
|
*ex 2920 29 00 ex 2920 90 70 |
50 50 |
Fosetyl-aluminium (CAS RN 39148-24-8) |
0 % |
- |
31.12.2018 |
|
*ex 2920 29 00 ex 2920 90 70 |
60 40 |
Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides (1) |
0 % |
- |
31.12.2021 |
|
ex 2922 19 00 |
40 |
(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5) |
0 % |
- |
31.12.2021 |
|
ex 2924 29 70 |
30 |
Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8) |
0 % |
- |
31.12.2021 |
|
ex 2924 29 70 |
50 |
N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3) |
0 % |
- |
31.12.2021 |
|
ex 2926 90 70 |
30 |
4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2) |
0 % |
- |
31.12.2021 |
|
*ex 2931 90 00 |
05 |
Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN |
0 % |
- |
31.12.2020 |
|
*ex 2932 14 00 ex 2940 00 00 |
10 40 |
1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2) |
0 % |
- |
31.12.2019 |
|
ex 2932 99 00 |
13 |
(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1 ,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2) |
0 % |
- |
31.12.2021 |
|
ex 2932 99 00 |
18 |
4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2) |
0 % |
- |
31.12.2021 |
|
ex 2933 19 90 |
45 |
5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3) |
0 % |
- |
31.12.2021 |
|
ex 2933 19 90 |
55 |
5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0) |
0 % |
- |
31.12.2021 |
|
ex 2933 29 90 |
75 |
2,2'-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2) |
0 % |
- |
31.12.2021 |
|
ex 2933 39 99 |
10 |
2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7) |
0 % |
- |
31.12.2021 |
|
ex 2933 39 99 |
33 |
5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9) |
0 % |
- |
31.12.2021 |
|
ex 2933 39 99 |
41 |
2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7) |
0 % |
- |
31.12.2021 |
|
ex 2933 39 99 |
46 |
Fluopicolide (ISO) (CAS RN 239110-15-7) for use in the manufacture of pesticides (1) |
0 % |
- |
31.12.2021 |
|
*ex 2933 59 95 ex 2933 99 80 |
88 51 |
Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides (1) |
0 % |
- |
31.12.2021 |
|
ex 2933 99 80 |
42 |
(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8) |
0 % |
- |
31.12.2021 |
|
ex 2933 99 80 |
44 |
(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9) |
0 % |
- |
31.12.2021 |
|
*ex 2933 99 80 |
53 |
Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (2) |
0 % |
- |
31.12.2018 |
|
*ex 2933 99 80 |
72 |
1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7) |
0 % |
- |
31.12.2018 |
|
ex 2934 99 90 |
46 |
4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8) |
0 % |
- |
31.12.2021 |
|
ex 2934 99 90 |
47 |
Thidiazuron (ISO) (CAS RN 51707-55-2) for use in the manufacture of pesticides (1) |
0 % |
- |
31.12.2021 |
|
ex 2934 99 90 |
49 |
Cytidine 5'-(disodium phosphate) (CAS RN 6757-06-8) |
0 % |
- |
31.12.2021 |
|
ex 2934 99 90 |
53 |
4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) |
0 % |
- |
31.12.2021 |
|
ex 2935 90 90 |
30 |
6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1) |
0 % |
- |
31.12.2021 |
|
*ex 3204 16 00 |
30 |
Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following: |
0 % |
- |
31.12.2019 |
|
ex 3204 17 00 |
22 |
Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight |
0 % |
- |
31.12.2021 |
|
*ex 3204 17 00 |
24 |
Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 50 % or more by weight |
0 % |
- |
31.12.2018 |
|
*ex 3215 90 70 |
30 |
Disposable cartridge ink, containing by weight: for use in the marking of integrated circuits (1) |
0 % |
- |
31.12.2018 |
|
*ex 3506 91 10 ex 3506 91 90 |
50 50 |
Preparation containing by weight: dissolved in :
|
0 % |
- |
31.12.2020 |
|
ex 3811 21 00 |
11 |
Dispersing agent and oxidation inhibitor containing : used in the manufacture of blends of additives for lubricating oils (1) |
0 % |
- |
31.12.2021 |
|
*ex 3811 21 00 |
19 |
Additives containing: having a total base number of more than 40, for use in the manufacture of lubricating oils (1) |
0 % |
- |
31.12.2019 |
|
ex 3811 29 00 |
75 |
Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (1) |
0 % (1) |
- |
31.12.2021 |
|
ex 3811 90 00 |
50 |
Corrosion inhibitor containing : for use in the manufacture of blends of additives for fuels (1) |
0 % |
- |
31.12.2021 |
|
*ex 3815 90 90 |
40 |
Catalyst: for use in the manufacture of acrylic acid (1) |
0 % |
- |
31.12.2018 |
|
ex 3824 99 92 |
25 |
Preparation containing by weight: |
0 % |
- |
31.12.2021 |
|
ex 3824 99 92 |
27 |
4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent |
0 % |
- |
31.12.2021 |
|
ex 3824 99 92 |
30 |
Aqueous solution of caesium formate and potassium formate containing by weight: |
0 % |
- |
31.12.2021 |
|
*ex 3824 99 92 |
40 |
Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent
|
0 % |
- |
31.12.2020 |
|
*ex 3824 99 92 |
69 |
Preparation containing by weight: |
0 % |
- |
31.12.2020 |
|
ex 3824 99 93 |
45 |
Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight: |
0 % |
- |
31.12.2021 |
|
ex 3824 99 96 |
70 |
Powder containing by weight: |
0 % |
- |
31.12.2021 |
|
ex 3824 99 96 |
74 |
Mixture with a non-stoichiometric composition:
|
0 % |
- |
31.12.2021 |
|
ex 3824 99 96 |
80 |
Mixture consisting of: |
0 % |
- |
31.12.2021 |
|
*ex 3901 10 10 ex 3901 90 80 |
20 50 |
High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with |
0 % |
m³ |
31.12.2019 |
|
ex 3906 90 90 |
53 |
Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260°C, containing by weight: |
0 % |
- |
31.12.2021 |
|
ex 3906 90 90 |
63 |
Copolymer of (Dimethoxymethylsilyl)propyl methacrylate, butylacrylate, allyl methacrylate, methyl methacrylate and cyclosiloxanes (CAS RN 143106-82-5) |
0 % |
- |
31.12.2021 |
|
ex 3910 00 00 |
45 |
Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPa·s (CAS RN 70131-67-8)
|
0 % |
- |
31.12.2021 |
|
ex 3910 00 00 |
55 |
Preparation containing by weight:
|
0 % |
- |
31.12.2021 |
|
*ex 3913 90 00 |
30 |
Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350 000 |
0 % |
- |
31.12.2018 |
|
ex 3920 99 59 |
70 |
Tetrafluoroethylene film, put up in rolls, with: for use in the manufacture of semiconductor devices (1) |
0 % |
- |
31.12.2021 |
|
*ex 3921 13 10 |
10 |
Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092 |
0 % |
m³ |
31.12.2018 |
|
ex 3921 19 00 |
50 |
Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with |
0 % |
- |
31.12.2021 |
|
*ex 3923 10 90 |
10 |
Photomask or wafer compacts: of a kind used in the photolithography or other semiconductor production to house photomasks or wafers |
0 % |
- |
31.12.2021 |
|
*ex 3926 30 00 ex 8708 29 10 ex 8708 29 90 |
10 10 10 |
Plastic cover with cips for the exterior rear-view mirror of motor vehicles |
0 % |
p/st |
31.12.2020 |
|
*ex 3926 90 97 |
20 |
Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls |
0 % |
p/st |
31.12.2019 |
|
ex 3926 90 97 ex 8512 90 90 |
77 10 |
Silicone decoupling ring, with an inner diameter of 15,4 mm (+0,0 mm/-0,1 mm), of a kind used in car parking aid sensor systems |
0 % |
p/st |
31.12.2021 |
|
ex 4016 99 57 |
10 |
Air intake hose for air supply to the combustion part of the engine comprising at least: for use in the manufacture of goods of Chapter 87 (1) |
0 % |
p/st |
31.12.2021 |
|
ex 4016 99 57 |
20 |
Rubber bumper strip with a silicone coating of a length not more than 1 200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 87 (1) |
0 % |
p/st |
31.12.2021 |
|
*ex 5911 90 99 ex 8421 99 90 |
30 92 |
Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more |
0 % |
- |
31.12.2018 |
|
*ex 5911 90 99 |
40 |
Multi-layered non-woven polyester polishing pads, impregnated with polyurethane |
0 % |
- |
31.12.2019 |
|
ex 6805 30 00 |
10 |
Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors (1) |
0 % |
- |
31.12.2021 |
|
ex 7318 19 00 |
30 |
Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 87 (1) |
0 % |
p/st |
31.12.2021 |
|
*ex 7410 11 00 ex 8507 90 80 ex 8545 90 90 |
10 60 30 |
Roll of laminate foil of graphite and copper, with: for use in the manufacture of lithium-ion electric rechargeable batteries (1) |
0 % |
- |
31.12.2021 |
|
*ex 7607 11 90 ex 7607 11 90 |
47 57 |
Aluminium foil in rolls: |
0 % |
- |
31.12.2021 |
|
*ex 7607 19 90 ex 8507 90 80 |
10 80 |
Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries (1) |
0 % |
- |
31.12.2021 |
|
*ex 7616 99 10 ex 8708 99 10 ex 8708 99 97 |
30 60 50 |
Aluminium engine bracket, with dimensions of: equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: of a kind used in the production of suspensions systems for engines in motor vehicles |
0 % |
p/st |
31.12.2019 |
|
*ex 8108 90 30 |
20 |
Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 40 (1) |
0 % |
- |
31.12.2017 |
|
*ex 8108 90 50 |
10 |
Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1 000 mm or more but not more than 1 254 mm, for the manufacture of goods of subheading 8714 10 (1) |
0 % |
- |
31.12.2018 |
|
*ex 8108 90 50 |
35 |
Plates, sheets and strips of an alloy of titanium |
0 % |
- |
31.12.2021 |
|
*ex 8301 60 00 ex 8413 91 00 ex 8419 90 85 ex 8438 90 00 ex 8468 90 00 ex 8476 90 90 ex 8479 90 70 ex 8481 90 00 ex 8503 00 99 ex 8515 90 80 ex 8536 90 95 ex 8537 10 98 ex 8708 91 20 ex 8708 91 99 ex 8708 99 10 ex 8708 99 97 |
20 40 30 20 20 20 83 30 70 30 95 70 10 20 50 40 |
Keypads of silicone or plastic, |
0 % |
p/st |
31.12.2020 |
|
*ex 8409 91 00 ex 8409 99 00 |
30 50 |
Exhaust manifold with spiral-shaped gas turbine turbocharger component with: |
0 % |
p/st |
31.12.2018 |
|
ex 8409 99 00 |
40 |
Plastic or aluminum cylinder head cover with: for use in the manufacture of engines of motor vehicles (1) |
0 % |
p/st |
31.12.2021 |
|
ex 8411 99 00 |
65 |
Spiral-shaped gas turbine turbocharger component: |
0 % |
p/st |
31.12.2021 |
|
ex 8413 30 20 |
30 |
Single-cylinder radial-piston high pressure pump for gasoline direct injection with: for use in the manufacture of engines of motor vehicles (1) |
0 % |
- |
31.12.2021 |
|
ex 8479 90 70 |
87 |
Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles (1) |
0 % |
p/st |
31.12.2021 |
|
ex 8481 80 59 |
20 |
Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (1) |
0 % |
p/st |
31.12.2021 |
|
ex 8484 20 00 |
10 |
Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (1) |
0 % |
p/st |
31.12.2021 |
|
ex 8501 10 99 |
56 |
DC Motor : |
0 % |
- |
31.12.2021 |
|
ex 8501 10 99 |
58 |
DC Motor : |
0 % |
- |
31.12.2021 |
|
*ex 8501 10 99 |
65 |
Electric turbocharger actuator, with: |
0 % |
- |
31.12.2020 |
|
*ex 8504 31 80 |
50 |
Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry
(1) |
0 % |
- |
31.12.2021 |
|
*ex 8504 40 90 |
25 |
Direct current to direct current converter |
0 % |
p/st |
31.12.2021 |
|
ex 8504 50 95 |
70 |
Solenoid coil with: |
0 % |
p/st |
31.12.2021 |
|
*ex 8505 11 00 |
65 |
Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having or in the shape of curved rectangle (tile type) having or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre |
0 % |
p/st |
31.12.2018 |
|
*ex 8505 11 00 |
75 |
A quarter sleeve intended to become permanent magnet after magnetization, of a kind used on rotors for the manufacture of fuel pumps |
0 % |
p/st |
31.12.2019 |
|
*ex 8507 90 80 |
70 |
Cut plate of nickel-plated copper foil, with: for use in the manufacture of lithium-ion electric rechargeable batteries (1) |
0 % |
p/st |
31.12.2021 |
|
ex 8518 40 80 |
93 |
Audio power amplifier with: for use in the manufacture of motor vehicles (1) |
0 % |
p/st |
31.12.2021 |
|
*ex 8522 90 80 ex 8529 90 92 |
30 57 |
Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (1) |
0 % |
p/st |
31.12.2021 |
|
*ex 8529 90 65 ex 8529 90 92 |
65 53 |
Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module |
0 % |
p/st |
31.12.2020 |
|
*ex 8529 90 92 |
59 |
LCD modules with: for permanent incorporation or permanent mounting into motor vehicles of Chapter 87 (1) |
0 % |
p/st |
31.12.2020 |
|
*ex 8529 90 92 |
63 |
LCD module suitable for installation in motor vehicles of Chapter 87 (1) |
0 % |
p/st |
31.12.2020 |
|
*ex 8529 90 92 |
67 |
Colour LCD display panel for LCD monitors of heading 8528: for use in the manufacture of vehicles of Chapter 87 (1) |
0 % |
p/st |
31.12.2020 |
|
*ex 8536 90 95 |
20 |
Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1 000 V |
0 % |
p/st |
31.12.2020 |
|
*ex 8536 90 95 |
92 |
Metallic stamped frame with connections |
0 % |
p/st |
31.12.2018 |
|
*ex 8536 90 95 ex 8544 49 93 |
94 10 |
Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements |
0 % |
p/st |
31.12.2018 |
|
ex 8537 10 98 |
65 |
Lever for control module under the steering wheel: of a kind used in the manufacture of motor vehicles of Chapter 87 |
0 % |
p/st |
31.12.2021 |
|
ex 8537 10 98 |
75 |
Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with: for use in the manufacture of goods of Chapter 87 (1) |
0 % |
p/st |
31.12.2021 |
|
*ex 8537 10 98 |
92 |
Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors |
0 % |
p/st |
31.12.2018 |
|
ex 8538 90 99 |
60 |
Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87 |
0 % |
p/st |
31.12.2021 |
|
ex 8543 70 90 |
15 |
Laminated electrochromic film consisting of:
|
0 % |
- |
31.12.2021 |
|
*ex 8543 70 90 |
33 |
High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing |
0 % |
- |
31.12.2021 |
|
ex 8544 42 90 |
80 |
12-wire connecting cable containing two connectors for use in the manufacture of goods of Chapter 87 (1) |
0 % |
p/st |
31.12.2021 |
|
ex 8708 10 10 ex 8708 10 90 |
10 10 |
Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (1) |
0 % |
p/st |
31.12.2021 |
|
*ex 8708 30 10 ex 8708 30 91 ex 8708 30 99 |
20 60 10 |
Motor powered brake actuation unit for use in the manufacture of electric motor vehicles (1) |
0 % |
p/st |
31.12.2019 |
|
*ex 8708 30 10 ex 8708 30 91 |
40 30 |
Body of disc type brake in BIR (“Ball in Ramp”) or EPB (“Electronic Parking Brake”) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87 |
0 % |
p/st |
31.12.2019 |
|
*ex 8708 30 10 ex 8708 30 91 |
50 10 |
Drum type parking brake: for use in the manufacture of motor vehicles (1) |
0 % |
p/st |
31.12.2021 |
|
*ex 8708 30 10 ex 8708 30 91 |
60 20 |
Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (1) |
0 % |
p/st |
31.12.2019 |
|
*ex 8708 30 10 ex 8708 30 91 |
70 40 |
Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87 |
0 % |
p/st |
31.12.2020 |
|
*ex 8708 40 20 ex 8708 40 50 |
20 10 |
Automatic hydrodynamic gearbox for use in the manufacture of motor vehicles of Chapter 87 (1) |
0 % |
p/st |
31.12.2020 |
|
*ex 8708 50 20 ex 8708 50 55 |
10 10 |
Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703 |
0 % |
p/st |
31.12.2020 |
|
*ex 8708 50 20 ex 8708 50 99 |
20 10 |
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle |
0 % |
p/st |
31.12.2020 |
|
*ex 8708 50 20 ex 8708 50 99 ex 8708 99 10 ex 8708 99 97 |
30 20 20 70 |
Single input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) x 131 mm (height) x 187 mm (length), comprising at least: for use in the manufacture of all-terrain vehicles or utility task vehicles (1) |
0 % |
- |
31.12.2021 |
|
*ex 8708 80 20 ex 8708 80 35 |
10 10 |
Upper strut insulator containing of a kind used in the manufacture of goods of Chapter 87 |
0 % |
p/st |
31.12.2020 |
|
*ex 8708 80 20 ex 8708 80 91 |
20 10 |
Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87 |
0 % |
p/st |
31.12.2020 |
|
*ex 8708 80 20 ex 8708 80 91 |
30 20 |
Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87 |
0 % |
p/st |
31.12.2020 |
|
ex 8708 80 99 |
10 |
Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87 (1) |
0 % |
p/st |
31.12.2021 |
|
*ex 8708 91 20 ex 8708 91 35 |
20 10 |
Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87 |
0 % |
p/st |
31.12.2019 |
|
*ex 8708 91 20 ex 8708 91 99 |
30 30 |
Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with: of a kind used in heat exchangers for car cooling systems |
0 % |
p/st |
31.12.2020 |
|
*ex 8708 94 20 ex 8708 94 35 |
10 20 |
Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87 |
0 % |
p/st |
31.12.2019 |
|
*ex 8708 95 10 ex 8708 95 99 |
40 10 |
Front passenger airbag composed of: of a kind used in the manufacture of goods of Chapter 87 |
0 % |
p/st |
31.12.2020 |
|
ex 8708 99 10 ex 8708 99 97 |
30 15 |
Front radiator holder whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87 (1) |
0 % |
p/st |
31.12.2021 |
|
ex 8708 99 10 ex 8708 99 97 |
40 25 |
Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 87 (1) |
0 % |
p/st |
31.12.2021 |
|
*ex 8714 91 30 ex 8714 91 30 ex 8714 91 30 |
25 35 72 |
Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (1) |
0 % |
- |
31.12.2018 |
|
*ex 9013 80 90 |
20 |
Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of: of a kind used for incorporation into products of Chapters 84 to 90 and 95
|
0 % |
p/st |
31.12.2019 |
|
(1) |
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1) |
|
(2) |
CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htm |
|
* |
Suspension relating to a product in the Annex to Regulation (EU) No 1387/2013 for which the CN or TARIC code or the product description is modified by this Regulation. |
ANNEX II
|
CN code |
TARIC |
|
ex 2818 30 00 |
30 |
|
ex 2842 10 00 |
40 |
|
ex 2905 11 00 |
20 |
|
ex 2909 60 00 |
20 |
|
ex 2916 14 00 |
30 |
|
ex 2920 90 70 |
40 |
|
ex 2920 90 70 |
50 |
|
ex 2931 90 00 |
05 |
|
ex 2933 59 95 |
88 |
|
ex 2933 99 80 |
53 |
|
ex 2933 99 80 |
72 |
|
ex 2940 00 00 |
40 |
|
ex 3204 16 00 |
20 |
|
ex 3204 17 00 |
67 |
|
ex 3215 90 70 |
30 |
|
ex 3506 91 10 |
50 |
|
ex 3506 91 90 |
50 |
|
ex 3811 21 00 |
57 |
|
ex 3815 90 90 |
40 |
|
ex 3824 99 92 |
21 |
|
ex 3824 99 92 |
24 |
|
ex 3824 99 92 |
69 |
|
ex 3901 10 10 |
20 |
|
ex 3901 90 80 |
50 |
|
ex 3913 90 00 |
92 |
|
ex 3921 13 10 |
10 |
|
ex 3923 10 00 |
10 |
|
ex 3926 30 00 |
10 |
|
ex 3926 90 97 |
20 |
|
ex 5911 90 90 |
30 |
|
ex 5911 90 90 |
40 |
|
ex 7410 11 00 |
10 |
|
ex 7607 11 90 |
40 |
|
ex 7607 19 90 |
10 |
|
ex 7616 99 10 |
30 |
|
ex 8108 90 30 |
20 |
|
ex 8108 90 50 |
10 |
|
ex 8108 90 50 |
25 |
|
ex 8301 60 00 |
20 |
|
ex 8409 91 00 |
65 |
|
ex 8409 99 00 |
30 |
|
ex 8411 99 00 |
70 |
|
ex 8413 91 00 |
40 |
|
ex 8419 90 85 |
30 |
|
ex 8421 99 00 |
92 |
|
ex 8438 90 00 |
20 |
|
ex 8468 90 00 |
20 |
|
ex 8476 90 10 |
20 |
|
ex 8476 90 90 |
20 |
|
ex 8479 90 70 |
83 |
|
ex 8481 90 00 |
30 |
|
ex 8501 10 99 |
55 |
|
ex 8503 00 99 |
70 |
|
ex 8504 31 80 |
50 |
|
ex 8504 40 90 |
20 |
|
ex 8505 11 00 |
33 |
|
ex 8505 11 00 |
45 |
|
ex 8507 90 80 |
60 |
|
ex 8507 90 80 |
70 |
|
ex 8507 90 80 |
80 |
|
ex 8515 90 80 |
30 |
|
ex 8522 90 80 |
30 |
|
ex 8529 90 65 |
65 |
|
ex 8529 90 92 |
35 |
|
ex 8529 90 92 |
36 |
|
ex 8529 90 92 |
50 |
|
ex 8536 90 40 |
20 |
|
ex 8536 90 40 |
92 |
|
ex 8536 90 40 |
94 |
|
ex 8536 90 40 |
95 |
|
ex 8536 90 95 |
20 |
|
ex 8536 90 95 |
92 |
|
ex 8536 90 95 |
94 |
|
ex 8536 90 95 |
95 |
|
ex 8537 10 98 |
70 |
|
ex 8537 10 98 |
92 |
|
ex 8543 70 90 |
33 |
|
ex 8543 90 00 |
15 |
|
ex 8544 49 93 |
10 |
|
ex 8545 90 90 |
30 |
|
ex 8708 29 90 |
10 |
|
ex 8708 30 10 |
20 |
|
ex 8708 30 10 |
30 |
|
ex 8708 30 91 |
10 |
|
ex 8708 30 91 |
20 |
|
ex 8708 30 91 |
30 |
|
ex 8708 30 91 |
40 |
|
ex 8708 30 91 |
50 |
|
ex 8708 40 20 |
20 |
|
ex 8708 40 50 |
10 |
|
ex 8708 50 55 |
10 |
|
ex 8708 50 99 |
10 |
|
ex 8708 50 99 |
20 |
|
ex 8708 80 35 |
10 |
|
ex 8708 80 91 |
10 |
|
ex 8708 80 91 |
20 |
|
ex 8708 91 35 |
10 |
|
ex 8708 91 99 |
20 |
|
ex 8708 91 99 |
30 |
|
ex 8708 94 35 |
20 |
|
ex 8708 95 99 |
10 |
|
ex 8708 99 10 |
20 |
|
ex 8708 99 97 |
40 |
|
ex 8708 99 97 |
50 |
|
ex 8708 99 97 |
70 |
|
ex 8714 91 30 |
24 |
|
ex 8714 91 30 |
34 |
|
ex 8714 91 30 |
71 |
|
ex 9013 80 90 |
10 |