EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 32012R0064
Commission Regulation (EU) No 64/2012 of 23 January 2012 amending Regulation (EU) No 582/2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) Text with EEA relevance
Commission Regulation (EU) No 64/2012 of 23 January 2012 amending Regulation (EU) No 582/2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) Text with EEA relevance
Commission Regulation (EU) No 64/2012 of 23 January 2012 amending Regulation (EU) No 582/2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) Text with EEA relevance
OJ L 28, 31.1.2012, p. 1–23
(BG, ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
Special edition in Croatian: Chapter 13 Volume 048 P. 127 - 149
In force
- Date of document:
- 23/01/2012
- Date of effect:
- 03/02/2012; Entry into force Date pub. +3 See Art 2
- Date of end of validity:
- No end date
- Author:
- European Commission
- Form:
- Regulation
- Additional information:
- EEA relevance
- Treaty:
- Treaty on the Functioning of the European Union
- Legal basis:
-
- 32007L0046 - A39P7
- 32009R0595 - A04P3 32009R0595 - A05P4 32009R0595 - A06P2 32009R0595 - A12
- Link
- Link
- Link
- Select all documents mentioning this document No data available in the table
- Modifies:
-
Relation Act Comment Subdivision concerned From To Modifies 32011R0582 Addition article 2 .42 03/02/2012 Modifies 32011R0582 Addition article 2 QT 03/02/2012 Modifies 32011R0582 Amendment annex XI 03/02/2012 Modifies 32011R0582 Amendment annex II 03/02/2012 Modifies 32011R0582 Addition article 2 OC 03/02/2012 Modifies 32011R0582 Replacement article 3.1 03/02/2012 Modifies 32011R0582 Addition article 3.1 BI 03/02/2012 Modifies 32011R0582 Addition article 2 .43 03/02/2012 Modifies 32011R0582 Addition article 3.1 TR 03/02/2012 Modifies 32011R0582 abolition article 3 .15 03/02/2012 Modifies 32011R0582 Addition article 2 .44 03/02/2012 Modifies 32011R0582 Replacement article 6 03/02/2012 Modifies 32011R0582 Addition article 2 NO 03/02/2012 Modifies 32011R0582 Addition article 3.1 QT 03/02/2012 Modifies 32011R0582 Amendment annex XIII 03/02/2012 Modifies 32011R0582 Addition article 2 SX 03/02/2012 Modifies 32011R0582 Addition article 2 BI 03/02/2012 Modifies 32011R0582 Replacement article 5.4 point G) 03/02/2012 Modifies 32011R0582 Replacement article 14.1 point D) 03/02/2012 Modifies 32011R0582 Addition article 2 QQ 03/02/2012 Modifies 32011R0582 Addition article 2 TR 03/02/2012 Modifies 32011R0582 Addition annex XVII 03/02/2012 Modifies 32011R0582 Addition article 2 ST 03/02/2012 Modifies 32011R0582 Amendment annex I 03/02/2012 Modifies 32011R0582 Replacement article 7.4 point D) 03/02/2012 Modifies 32011R0582 Amendment annex III 03/02/2012 Modifies 32011R0582 Amendment annex VI 03/02/2012 Modifies 32011R0582 Replacement article 15.1 L1 03/02/2012 Modifies 32011R0582 Replacement article 5 title 03/02/2012
No data available in the table
- Modified by:
-
Relation Act Comment Subdivision concerned From To Corrected by 32012R0064R(01) (HU) - Instruments cited:
- Link
- EUROVOC descriptor:
- Subject matter:
- Directory code:
|
31.1.2012 |
EN |
Official Journal of the European Union |
L 28/1 |
COMMISSION REGULATION (EU) No 64/2012
of 23 January 2012
amending Regulation (EU) No 582/2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI)
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) and on access to vehicle repair and maintenance information and amending Regulation (EC) No 715/2007 and Directive 2007/46/EC and repealing Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC (1), and in particular Article 4(3), Article 5(4), Article 6(2) and Article 12 thereof,
Having regard to Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (2), and in particular Article 39(7) thereof,
Whereas:
|
(1) |
Regulation (EC) No 595/2009 establishes common technical requirements for the type-approval of motor vehicles and replacement parts with regard to their emissions and lays down rules for in-service conformity, durability of pollution control devices, on-board diagnostic (OBD) systems, measurement of fuel consumption and accessibility of vehicle repair and maintenance information. |
|
(2) |
In accordance with Article 3(15) of Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (3), vehicles and engines are to be type-approved in accordance with Regulation (EC) No 595/2009 and its implementing measures only once measurement procedures for measuring PM number as set out in Annex I to Regulation (EC) No 595/2009, any specific provisions regarding multi-setting engines that are needed and provisions implementing Article 6 of Regulation (EC) No 595/2009 have been adopted. Therefore, it is appropriate to amend Regulation (EU) No 582/2011 in order to include such requirements. |
|
(3) |
In accordance with Article 6 of Regulation (EC) No 595/2009, Articles 6 and 7 of Regulation (EC) No 715/2007 on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (4) shall apply mutatis mutandis. Therefore, it is appropriate to carry over to this Regulation the provisions on access to repair and maintenance information set out in Regulation (EC) No 715/2007 and its implementing measures. However, it is necessary to adapt those provisions in order to take into account the specificities of the heavy-duty vehicles. |
|
(4) |
In particular, it is appropriate to adopt specific procedures for access to vehicle repair and maintenance information in accordance with Article 6(1) of Regulation (EC) No 595/2009 in the case of multi-stage type-approval. It is also appropriate to adopt specific requirements and procedures for access to vehicle repair and maintenance information in the case of customer adaptations and small volume production. Finally, it is appropriate to make reference to the specific standards for reprogramming developed for the heavy-duty vehicles. |
|
(5) |
Application of the provisions on access to repair and maintenance information may be too burdensome for vehicle manufacturers in the short term with respect to certain systems which are carried over from old vehicle types to new vehicle types. It is therefore appropriate to introduce certain limited derogations from the general provisions on access to vehicle OBD and vehicle repair and maintenance information. |
|
(6) |
Provisions on the access to OBD and vehicle repair and maintenance information for the purposes of the design and manufacture of automotive equipment for alternative fuel vehicles should be set once type-approval for such equipment becomes possible. |
|
(7) |
In accordance with Council Directive 92/6/EEC of 10 February 1992 on the installation and use of speed limitation devices for certain categories of motor vehicles in the Community (5), speed limitation devices are to be installed by workshops or bodies approved by the Member States. In accordance with Council Regulation (EEC) No 3821/85 of 20 December 1985 on recording equipment in road transport (6), only approved workshops may calibrate recording equipment in motor vehicles. It is therefore appropriate to exclude the information concerning the reprogramming of control units for speed limitation devices and recording equipment from the provisions on giving access to repair and maintenance information. |
|
(8) |
Regulation (EU) No 582/2011 should therefore be amended accordingly. |
|
(9) |
The measures provided for in this Regulation are in accordance with the opinion of the Technical Committee — Motor Vehicles, |
HAS ADOPTED THIS REGULATION:
Article 1
Regulation (EU) No 582/2011 is amended as follows:
|
(1) |
in Article 2, the following points (42), (43) and (44) are added:
|
|
(2) |
the following Articles 2a to 2h are inserted: ‘Article 2a Access to vehicle OBD and vehicle repair and maintenance information 1. Manufacturers shall put in place the necessary arrangements and procedures, in accordance with Article 6 of Regulation (EC) No 595/2009 and Annex XVII to this Regulation, to ensure that vehicle OBD and vehicle repair and maintenance information is accessible through websites using a standardised format in a readily accessible and prompt manner, and in a manner which is non-discriminatory compared to the provisions given or access granted to authorised dealers and repairers. Manufacturers shall also make training material available to independent operators and authorised dealers and repairers. 2. Approval authorities shall only grant type-approval after receiving from the manufacturer a Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information. 3. The Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information shall serve as the proof of compliance with Article 6 of Regulation (EC) No 595/2009. 4. The Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information shall be drawn up in accordance with the model set out in Appendix 1 of Annex XVII. 5. The vehicle OBD and vehicle repair and maintenance information shall include the following:
6. Authorised dealers or repairers within the distribution system of a given vehicle manufacturer shall be regarded as independent operators for the purposes of this Regulation to the extent that they provide repair or maintenance services for vehicles in respect of which they are not members of the vehicle manufacturer’s distribution system. 7. The vehicle repair and maintenance information shall always be available, except as required for maintenance purposes of the information system. 8. For the purposes of manufacture and servicing of OBD-compatible replacement or service parts and diagnostic tools and test equipment, manufacturers shall provide the relevant vehicle OBD and vehicle repair and maintenance information on a non-discriminatory basis to any interested component, diagnostic tools or test equipment manufacturer or repairer. 9. The manufacturer shall make subsequent amendments and supplements to vehicle repair and maintenance information available on its websites at the same time they are made available to authorised repairers. 10. Where repair and maintenance records of a vehicle are kept in a central data base of the vehicle manufacturer or on its behalf, independent repairers, who have been approved and authorised as required in Section 2.2 of Annex XVII, shall have access to such record free of charge and under the same conditions as authorised repairers in order to be able to enter information on repair and maintenance which they have performed. 11. The manufacturer shall make available to interested parties the following information:
For the purposes of point (a) of the first subparagraph, the development of replacement components shall not be restricted by any of the following:
For the purposes of point (b) of the first subparagraph, where manufacturers use diagnostic and test tools in accordance with ISO 22900 Modular vehicle communication interface (MVCI) and ISO 22901 Open diagnostic data exchange (ODX) in their franchised networks, the ODX files shall be accessible to independent operators via the website of the manufacturer. Article 2b Multi-stage type-approval 1. In the case of multi-stage type-approval, as defined in Article 3(7) of Directive 2007/46/EC, the final manufacturer shall be responsible for providing access to vehicle OBD and vehicle repair and maintenance information regarding its own manufacturing stage(s) and the link to the previous stage(s). In addition, the final manufacturer shall on its website provide independent operators with the following information:
2. Each manufacturer responsible for a particular stage or stages of type-approval shall be responsible for providing through his website access to vehicle OBD and vehicle repair and maintenance information regarding the stage(s) of type-approval for which he is responsible and the link to the previous stage(s). 3. The manufacturer responsible for a particular stage or stages of type-approval shall provide the following information to the manufacturer responsible for the next stage:
Each manufacturer shall authorise the manufacturer responsible for the next stage to pass the documents provided to the manufacturers responsible for any subsequent stages and the final stage. In addition, on a contractual basis, the manufacturer responsible for a particular stage or stages of type-approval shall:
4. A manufacturer, including a final manufacturer, may only charge fees in accordance with Article 2f concerning the particular stage(s) for which he is responsible. A manufacturer, including a final manufacturer, shall not charge fees for providing information relating to the website address or contact details of any other manufacturer. Article 2c Customer adaptations 1. By derogation from Article 2a, if the number of systems, components or separate technical units subject to a specific customer adaptation is lower than a total of 250 units produced worldwide, repair and maintenance information for the customer adaptation shall be provided in a readily accessible and prompt manner, and in a manner which is non-discriminatory compared to the provisions given or access granted to authorised dealers and repairers. For the servicing and reprogramming of the electronic control units relating to the customer adaptation, the manufacturer shall make the respective proprietary specialist diagnostic tool or test equipment available to independent operators as provided to authorised repairers. The customer adaptations shall be listed on the manufacturer’s repair and maintenance information website and mentioned in the Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information at the time of type-approval. 2. Until 31 December 2015, if the number of systems, components or separate technical units subject to a specific customer adaptation is higher than 250 units worldwide, the manufacturer may derogate from the obligation under Article 2a to provide access to vehicle OBD and vehicle repair and maintenance information using a standardised format. Where the manufacturer makes use of such derogation, he shall provide access to vehicle OBD and vehicle repair and maintenance information in a readily accessible and prompt manner, and in a manner which is non-discriminatory compared to the provisions given or access granted to authorised dealers and repairers. 3. Manufacturers shall make the proprietary specialist diagnostic tool or test equipment to service the customer-adapted systems, components or technical units available to independent operators via sale and rent. 4. The manufacturer shall mention in the Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information at the time of type-approval the customer adaptations for which the obligation under Article 2a to provide access to vehicle OBD and vehicle repair and maintenance information using a standardised format is derogated from and any electronic control unit related to them. Those customer adaptations and any electronic control unit related to them shall also be listed on the manufacturer’s repair and maintenance information website. Article 2d Small volume manufacturers 1. By derogation from Article 2a, manufacturers whose worldwide annual production of a type of vehicle, system, component or separate technical unit subject to this Regulation is less than 250 units, shall provide access to repair and maintenance information in a readily accessible and prompt manner, and in a manner which is non-discriminatory compared to the provisions given or access granted to authorised dealers and repairers. 2. The vehicle, system, component and separate technical unit subject to paragraph 1 shall be listed on the manufacturer’s repair and maintenance information website. 3. The approval authority shall inform the Commission of each type-approval granted to small volume manufacturers. Article 2e Carry-over systems 1. Until 30 June 2016, with respect to the carry-over systems listed in Appendix 3 to Annex XVII, the manufacturer may derogate from the obligation to reprogramme the electronic control units in accordance with the standards mentioned in Annex XVII. Such a derogation shall be indicated on the Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information at the time of type-approval. The systems for which a manufacturer derogates from the obligation to reprogramme the electronic control units in accordance with the standards mentioned in Annex XVII shall be listed on its repair and maintenance information website. 2. For the servicing and reprogramming of the electronic control units in the carry-over systems for which the manufacturer derogates from the obligation to reprogramme the electronic control units in accordance with the standards mentioned in Annex XVII, manufacturers shall ensure that the respective proprietary tool or equipment can be purchased or rented by independent operators. Article 2f Fees for access to vehicle repair and maintenance information 1. Manufacturers may charge reasonable and proportionate fees for access to the vehicle repair and maintenance information covered by this Regulation. For the purposes of the first subparagraph, a fee shall be considered unreasonable or disproportionate if it discourages access by failing to take into account the extent to which the independent operator uses it. 2. Manufacturers shall make available vehicle repair and maintenance information, including transactional services such as reprogramming or technical assistance, on an hourly, daily, monthly, and yearly basis, with fees for access to such information varying in accordance with the respective periods of time for which access is granted. In addition to time-based access, manufacturers may offer transaction-based access, for which fees are charged per transaction and not based on the time for which access is granted. Where both access systems are offered by manufacturers, independent repairers shall choose a preferred access system, either time-based or transaction-based Article 2g Compliance with the obligations regarding access to vehicle OBD and vehicle repair and maintenance information 1. An approval authority may, at any time, whether on its own initiative, on the basis of a complaint, or on the basis of an assessment by a technical service, check the compliance of a manufacturer with Regulation (EC) No 595/2009, this Regulation, and the terms of the Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information. 2. Where an approval authority finds that the manufacturer has failed to comply with his obligations regarding access to vehicle OBD and vehicle repair and maintenance information, the approval authority which granted the relevant type-approval shall take appropriate measures to remedy the situation. Those measures may include withdrawal or suspension of type-approval, fines, or other measures adopted in accordance with Article 11 of Regulation (EC) No 595/2009. 3. The approval authority shall proceed to an audit in order to verify compliance by the manufacturer with the obligations concerning access to vehicle OBD and vehicle repair and maintenance information, if an independent operator or a trade association representing independent operators files a complaint to the approval authority. 4. When carrying out the audit, the approval authority may ask a technical service or any other independent expert to carry out an assessment to verify whether these obligations are met. Article 2h Forum on Access to Vehicle Information The scope of application of the activities carried out by the Forum on Access to Vehicle Information established in accordance with Article 13(9) of Commission Regulation (EC) No 692/2008 (7) shall be extended to the vehicles covered by Regulation (EC) No 595/2009. On the basis of evidence of deliberate or unintentional misuse of vehicle OBD and vehicle repair and maintenance information, the Forum shall advise the Commission on measures to prevent such misuse of information. |
|
(3) |
Article 3 is amended as follows:
|
|
(4) |
Article 5 is amended as follows:
|
|
(5) |
in Article 6, the title is replaced by the following: ‘Article 6 Administrative provisions for EC type-approval of an engine system or engine family as a separate technical unit with regard to emissions and access to repair and maintenance information’; |
|
(6) |
in Article 7(4), point (d) is replaced by the following:
|
|
(7) |
in Article 14(1), point (d) is replaced by the following:
|
|
(8) |
in Article 15(1), the first subparagraph is replaced by the following: ‘The manufacturer shall ensure that replacement pollution control devices intended to be fitted to EC type-approved engine systems or vehicles covered by Regulation (EC) No 595/2009 are EC type-approved, as separate technical units in accordance with the requirements of this Article and of Articles 1a, 16 and 17.’; |
|
(9) |
in Article 16, paragraph 3 is replaced by the following: ‘3. The manufacturer shall submit the Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information.’; |
|
(10) |
Annexes I, II, III, VI, X, XI and XIII are amended in accordance with Annex I to this Regulation; |
|
(11) |
a new Annex XVII, the text of which is set out in Annex II to this Regulation, is added. |
Article 2
This Regulation shall enter into force on the third day following its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 23 January 2012.
For the Commission
The President
José Manuel BARROSO
(1) OJ L 188, 18.7.2009, p. 1.
(2) OJ L 263, 9.10.2007, p. 1.
(3) OJ L 167, 25.6.2011, p. 1.
(4) OJ L 171, 29.6.2007, p. 1.
(6) OJ L 370, 31.12.1985, p. 8.
(7) OJ L 199, 28.7.2008, p. 1.’
ANNEX I
Annexes I, II, III, VI, X, XI and XIII to Regulation (EU) No 582/2011 are amended as follows:
|
(1) |
Annex I is amended as follows:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
(2) |
Annex II is amended as follows:
|
|
(3) |
in Annex III, the following point 2.1.1 is inserted after point 2.1:
|
|
(4) |
Annex VI is amended as follows:
|
|
(5) |
Annex X is amended as follows:
|
|
(6) |
Annex XI is amended as follows: in Appendix 1, the following new Section is added in the Model of information document: ‘ACCESS TO VEHICLE REPAIR AND MAINTENANCE INFORMATION
|
|
(7) |
Annex XIII is amended as follows:
|
(1) Vehicle or vehicles in the case of a secondary engine.’;
ANNEX II
ANNEX XVII
ACCESS TO VEHICLE OBD AND VEHICLE REPAIR AND MAINTENANCE INFORMATION
1. INTRODUCTION
|
1.1. |
This Annex lays down technical requirements for the accessibility of vehicle OBD and vehicle repair and maintenance information. |
2. REQUIREMENTS
|
2.1. |
Vehicle OBD and vehicle repair and maintenance information available through websites shall follow the common standard referred to in Article 6(1) of Regulation (EC) No 595/2009. Until this standard is adopted, manufacturers shall provide vehicle OBD and vehicle repair and maintenance information in a standardised manner which is non-discriminatory compared to the provisions given or access granted to authorised dealers and repairers. Those requiring the right to duplicate or republish the information shall negotiate directly with the manufacturer concerned. Information for training material shall also be available, but may be presented through other media than websites. Information on all parts of the vehicle, with which the vehicle, as identified by the vehicle identification number (VIN) and any additional criteria such as wheelbase, engine output, trim level or options, is equipped by the vehicle manufacturer and which can be replaced by spare parts offered by the vehicle manufacturer to its authorised repairers or dealers or third parties by means of reference to original equipment (OE) parts number, shall be made available in a database which is easily accessible to independent operators. This database shall comprise the VIN, OE parts numbers, OE naming of the parts, validity attributes (valid-from and valid-to dates), fitting attributes and, where applicable, structuring characteristics. The information on the database shall be regularly updated. The updates shall include in particular all modifications to individual vehicles after their production if this information is available to authorised dealers. |
|
2.2. |
Access to vehicle security features used by authorised dealers and repair shops shall be made available to independent operators under protection of security technology in accordance with the following requirements:
The Forum on Access to Vehicle Information referred to in Article 2h shall specify the parameters for fulfilling these requirements in accordance with the state of the art. The independent operator shall be approved and authorised for this purpose on the basis of documents demonstrating that he pursues a legitimate business activity and has not been convicted of any criminal activity. |
|
2.3. |
Reprogramming of control units shall be conducted in accordance with either ISO 22900-2 or SAE J2534 or TMC RP1210B using non-proprietary hardware. Ethernet, serial cable or local area network (LAN) interface and alternative media like compact disc (CD), digital versatile disc (DVD) or solid state memory device for infotainment systems (e.g. navigation systems, telephone) may also be used, but on the condition that no proprietary communication software (e.g. drivers or plug-ins) and hardware is required. For the validation of the compatibility of the manufacturer-specific application and the vehicle communication interfaces (VCI) complying to ISO 22900-2 or SAE J2534 or TMC RP1210B, the manufacturer shall offer either a validation of independently developed VCIs or the information, and loan of any special hardware, required for a VCI manufacturer to conduct such validation himself. The conditions of Article 2f(1) shall apply to fees for such validation or information and hardware. |
|
2.4. |
The requirements of section 2.3 shall not apply in the case of reprogramming of speed limitation devices and recording equipment. |
|
2.5. |
All emission-related DTCs shall be consistent with Annex X. |
|
2.6. |
For access to any vehicle OBD and vehicle repair and maintenance information other than that relating to secure areas of the vehicle, registration requirements for use of the manufacturer’s website by an independent operator shall require only such information as is necessary to confirm how payment for the information is to be made. For information concerning access to secure areas of the vehicle, the independent operator shall present a certificate in accordance with ISO 20828 to identify himself and the organisation to which he belongs and the manufacturer shall respond with his own certificate in accordance with ISO 20828 to confirm to the independent operator that he is accessing a legitimate site of the intended manufacturer. Both parties shall keep a log of any such transactions indicating the vehicles and changes made to them under this provision. |
|
2.7. |
Manufacturers shall indicate in their repair information websites the type-approval number by model. |
|
2.8. |
If requested by the manufacturer, for vehicles of category M1, M2, N1 and N2 with a maximum permissible mass not exceeding 7,5 tonnes and M3 Class I, Class II and Class A and Class B, as defined in Annex I to Directive 2001/85/EC, with a permissible mass not exceeding 7,5 tonnes, compliance with the requirements of Appendix 5 to Annex I and Annex XIV to Regulation (EC) No 692/2008 shall be considered equivalent to the compliance with this Annex. |
|
2.9. |
The approval authority shall inform the Commission of the circumstances of each type-approval granted under Section 2.8. |
Appendix 1
Manufacturer’s Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information
(Manufacturer): …
(Address of the manufacturer): …
Certifies that
it provides access to vehicle OBD and vehicle repair and maintenance information in compliance with the provisions of:
|
— |
Article 6 of Regulation (EC) No 595/2009 and Article 2a of Regulation (EU) No 582/2011, |
|
— |
Article 4(6) of Regulation (EU) No 582/2011, |
|
— |
Annex I, Appendix 4, Section 16 of Regulation (EU) No 582/2011, |
|
— |
Annex X, Section 2.1 of Regulation (EU) No 582/2011, |
|
— |
Annex XVII of Regulation (EU) No 582/2011, |
with respect to the types of vehicle, engine, pollution control device listed in attachment to this Certificate.
The following derogations are applied: Customer adaptations (1) — Small volume (1) — Carry-over systems (1).
The principal website address through which the relevant information may be accessed and which is hereby certified to be in compliance with the above provisions are listed in an attachment to this Certificate along with the contact details of the responsible manufacturer’s representative whose signature is below.
Where applicable: The manufacturer hereby also certifies that it has complied with the obligation provided for in Article 3(1a) of Regulation (EU) No 582/2011 to provide the relevant information for previous approvals of these vehicle types no later than six months after the date of type-approval.
Done at … [Place]
On … [Date]
[Signature] [Position]
Annexes:
|
— |
Website addresses, |
|
— |
Contact details. |
ANNEX I
to Manufacturer’s Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information
Website addresses referred to by this Certificate:
ANNEX II
to Manufacturer’s Certificate on Access to Vehicle OBD and Vehicle Repair and Maintenance Information
Contact details of the manufacturer’s representative referred to by this Certificate:
Appendix 2
Vehicle OBD information
1. The information required in this Appendix shall be provided by the vehicle manufacturer for the purposes of enabling the manufacture of OBD-compatible replacement or service parts and diagnostic tools and test equipment.
2. Upon request, the following information shall be made available to any interested component, diagnostic tools or test equipment manufacturer, on a non-discriminatory basis:
|
— |
A description of the type and number of the preconditioning cycles used for the original type-approval of the vehicle. |
|
— |
A description of the type of the OBD demonstration cycle used for the original type-approval of the vehicle for the component monitored by the OBD system. |
|
— |
A comprehensive document describing all sensed components with the strategy for fault detection and MI activation (fixed number of driving cycles or statistical method), including a list of relevant secondary sensed parameters for each component monitored by the OBD system and a list of all OBD output codes and format used (with an explanation of each code and format) associated with individual emission-related power-train components and individual non-emission related components, where monitoring of the component is used to determine MI activation. In particular, in the case of vehicle types that use a communication link in accordance with ISO 15765-4 “Road vehicles — Diagnostics on controller area network (CAN) — Part 4: Requirements for emissions-related systems”, a comprehensive explanation for the data given in service $ 05 Test ID $ 21 to FF and the data given in service $ 06, and a comprehensive explanation for the data given in service $ 06 Test ID $ 00 to FF, for each OBD monitor ID supported, shall be provided. |
In case other communication protocols standards are used, equivalent comprehensive explanation shall be provided.
This information may be provided in the form of a table, as follows:
|
|
Component | Fault code | Monitoring strategy | Fault detection criteria | MI activation criteria | Secondary parameters | Preconditioning | Demonstration test | |
|
|
Catalyst | P0420 | Oxygen sensor 1 and 2 signals | Difference between sensor 1 and sensor 2 signals | 3rd cycle | Engine speed, engine load, A/F mode, catalyst temperature | Two Type 1 cycles | Type 1 | |
3. Information required for the manufacture of diagnostic tools
In order to facilitate the provision of generic diagnostic tools for multi-make repairers, vehicle manufacturers shall make available the information referred to in points 3.1, 3.2 and 3.3 through their repair information websites. That information shall include all diagnostic tool functions and all the links to repair information and troubleshooting instructions. The access to the information may be subject to the payment of a reasonable fee.
3.1. Communication protocol information
The following information shall be required indexed against vehicle make, model and variant, or other workable definition such as VIN or vehicle and systems identification:
|
(a) |
Any additional protocol information system necessary to enable complete diagnostics in addition to the standards prescribed in Point 4.7.3 of Annex 9B to UN/ECE Regulation No 49, including any additional hardware or software protocol information, parameter identification, transfer functions, “keep alive” requirements, or error conditions. |
|
(b) |
Details of how to obtain and interpret all fault codes which are not in accordance with the standards prescribed in Point 4.7.3 of Annex 9B to UN/ECE Regulation No 49. |
|
(c) |
A list of all available live data parameters, including scaling and access information. |
|
(d) |
A list of all available functional tests, including device activation or control and the means to implement them. |
|
(e) |
Details of how to obtain all component and status information, time stamps, pending DTC and freeze frames. |
|
(f) |
Resetting adaptive learning parameters, variant coding and replacement component setup, and customer preferences. |
|
(g) |
ECU identification and variant coding. |
|
(h) |
Details of how to reset service lights. |
|
(i) |
Location of diagnostic connector and connector details. |
|
(j) |
Engine code identification. |
3.2. Test and diagnosis of OBD monitored components
The following information shall be required:
|
(a) |
A description of tests to confirm its functionality, at the component or in the harness. |
|
(b) |
Test procedure including test parameters and component information. |
|
(c) |
Connection details including minimum and maximum input and output and driving and loading values. |
|
(d) |
Values expected under certain driving conditions including idling. |
|
(e) |
Electrical values for the component in its static and dynamic states. |
|
(f) |
Failure mode values for each of the above scenarios. |
|
(g) |
Failure mode diagnostic sequences including fault trees and guided diagnostics elimination. |
3.3. Data required to perform the repair
The following information shall be required:
|
(a) |
ECU and component initialisation (in the event of replacements being fitted). |
|
(b) |
Initialisation of new or replacement ECU’s where relevant using pass-through (re-) programming techniques. |
Appendix 3
List of carry-over systems covered by Article 2e
|
|
||||||||
|
|
(1) Delete where not applicable.
