20071217

Commission Regulation (EC) No 1493/2007

of 17 December 2007

establishing, pursuant to Regulation (EC) No 842/2006 of the European Parliament and of the Council, the format for the report to be submitted by producers, importers and exporters of certain fluorinated greenhouse gases

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Regulation (EC) No 842/2006 of the European Parliament and of the Council of 17 May 2006 on certain fluorinated greenhouse gases [1], and in particular Article 6(2) thereof;

Whereas:

(1) The data to be submitted by the importers and producers should include estimates of quantities of fluorinated greenhouse gases expected to be used in the main applications, including the quantities expected to be used as feedstock, in order to provide additional information for the Commission and the Member States with the objective of acquiring emission data for the relevant sectors.

(2) Producers purchase and sell fluorinated greenhouse gases from and to other producers for commercial reasons and in these cases only the purchasing producer can report on the quantities of those substances expected to be used in the main applications.

(3) Stakeholders have been consulted on the format of the report and their experience in reporting under Regulation (EC) No 2037/2000 of the European Parliament and of the Council of 29 June 2000 on substances that deplete the ozone layer [2] has been taken into account.

(4) The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 18(1) of Regulation (EC) No 2037/2000,

HAS ADOPTED THIS REGULATION:

Article 1

The format of the report referred to in Article 6(1) of Regulation (EC) No 842/2006 is set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the 20th day following its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 17 December 2007.

For the Commission

Stavros Dimas

Member of the Commission

[1] OJ L 161, 14.6.2006, p. 1.

[2] OJ L 244, 29.9.2000, p. 1. Regulation as last amended by Commission Decision 2007/540/EC (OJ L 198, 31.7.2007, p. 35).

--------------------------------------------------

20071217

ANNEX

REPORTING FORM FOR PRODUCERS, IMPORTERS AND EXPORTERS OF FLUORINATED GREENHOUSE GASES

PART 1

INTRODUCTION

Article 6 of Regulation (EC) No 842/2006 on certain fluorinated greenhouse gases requires that producers, importers, and exporters of fluorinated greenhouse gases report certain activities to the European Commission annually, beginning in 2008 (for activities occurring during 2007). The following form is to be completed by producers, importers, and exporters in the European Community who produce, import, and/or export more than one metric tonne of fluorinated greenhouse gases, or preparations containing fluorinated greenhouse gases, per annum.

Quantities imported or exported shall include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Reported imports and exports of fluorinated greenhouse gases should include only those quantities imported from or exported to countries outside the Community. Similarly, Regulation (EC) No 842/2006 does not require importers to report on quantities purchased from Community producers or distributors, or on stockpiled quantities originally obtained from Community producers or distributors.

Companies that produce and capture more than one tonne of fluorinated greenhouse gases as a by-product of other chemical production (e.g., production of HFC-23 from the manufacture of HCFC-22) are responsible for completing this form to account for captured fluorinated greenhouse gases; by-products that are emitted and not captured do not need to be reported in this form.

CONFIDENTIALITY

All information provided in this report shall be considered strictly confidential. No company-specific information shall be disclosed to the public; all company data shall be aggregated into summary reports before being made available to the public. Any concerns regarding confidentiality can be addressed to the Commission or to the entity designated by the Commission.

INSTRUCTIONS

Complete all applicable parts of this form to account for activities occurring during the previous calendar year (i.e., activities conducted in 2007 shall be reported and submitted in 2008, no later than 31 March). For your reference, definitions that may be helpful for completing the forms and a listing of the regulated fluorinated greenhouse gases with corresponding CAS numbers are provided in Part 2.

Note that reporting is normally done at the company level (not the facility level).

Submission

Once completed, this report must be submitted by 31 March of the year following the year for which the report applies. The report shall be submitted to the Commission or to the entity designated by the Commission and to the competent authority in your Member State.

+++++ TIFF +++++

PART 2

Definitions

Fluorinated greenhouse gases: hydrofluorocarbons (HFCs), perfluorocarbons (PFCs) and sulphur hexafluoride (SF6) as listed in Annex I of Regulation (EC) No 842/2006 and preparations containing those substances, but excluding substances controlled under Regulation (EC) No 2037/2000 on substances that deplete the ozone layer.

Preparation (industry often refers to preparations as blends): A mixture composed of two or more substances at least one of which is a fluorinated greenhouse gas, except where the total global warming potential of the preparation is less than 150. The total global warming potential of the preparation shall be determined in accordance with Part 2 of Annex I of Regulation (EC) No 842/2006 on certain fluorinated greenhouse gases.

Placing on the market: For the purposes of these reporting forms, placing on the market means the supplying of or making available to a third party within the Community for the first time, against payment or free of charge, bulk quantities of fluorinated greenhouse gases, and includes import into the customs territory of the Community excluding those contained in equipment.

Community co-producer: A producer of fluorinated greenhouse gases in the Community with whom another producer may conduct transactions (i.e., sales and purchases of fluorinated greenhouse gases).

Feedstock: Any substance that undergoes chemical transformation in a process by which the chemical is entirely converted from its original composition and whose emissions are insignificant.

Reclamation: The reprocessing of a recovered fluorinated greenhouse gas in order to meet a specified standard of performance.

Recycling: The reuse of a recovered fluorinated greenhouse gas following a basic cleaning process.

Destruction: The process by which all or most of a fluorinated greenhouse gas is permanently transformed or decomposed into one or more stable substances which are not fluorinated greenhouse gases.

Note: Production of a fluorinated greenhouse gas preparation refers to the production of the preparation constituents, not to the blending process

Reporting on production of fluorinated greenhouse gas by-product

This form should not be used to report emissions of fluorinated greenhouse gas by-products that result from the manufacture of other chemicals (e.g., emissions of HFC-23 from the manufacture of HCFC-22); do not report on by-product fluorinated greenhouse gas production that is emitted directly to the atmosphere. However, companies that produce fluorinated greenhouse gases as a by-product of other chemical production and capture the by-product fluorinated greenhouse gases produced are responsible for completing this form to account for the captured by-product fluorinated greenhouse gases, which are considered as new production.

+++++ TIFF +++++

Fluorinated greenhouse gases covered by Regulation (EC) No 842/2006

The table below lists the regulated fluorinated greenhouse gases and their corresponding Chemical Abstract Service (CAS) numbers. For the Combined Nomenclature (CN8) of regulated fluorinated greenhouse gases, refer to the current regulation, published no later than 31 October of the year before the year to which it applies, available at: http://europa.eu.int/eur-lex/lex/en/index.htm

Regulated fluorinated greenhouse gases

Chemical formula

CAS No

Sulphur hexafluoride

SF6

2551-62-4

Hydrofluorocarbons (HFCs):

HFC-23

CHF3

75-46-7

HFC-32

CH2F2

75-10-5

HFC-41

CH3F

593-53-3

HFC-43-10mee

C5H2F10

138495-42-8

HFC-125

C2HF5

354-33-6

HFC-134

C2H2F4

359-35-3

HFC-134a

CH2FCF3

811-97-2

HFC-152a

C2H4F2

75-37-6

HFC-143

C2H3F3

430-66-0

HFC-143a

C2H3F3

420-46-2

HFC-227ea

C3HF7

431-89-0

HFC-236cb

CH2FCF2CF3

677-56-5

HFC-236ea

CHF2CHFCF3

431-63-0

HFC-236fa

C3H2F6

690-39-1

HFC-245ca

C3H3F5

679-86-7

HFC-245fa

CHF2CH2CF3

460-73-1

HFC-365mfc

CF3CH2CF2CH3

406-58-6

Perfluorocarbons (PFCs):

Perfluoromethane

CF4

75-73-0

Perfluoroethane

C2F6

76-16-4

Perfluoropropane

C3F8

76-19-7

Perfluorobutane

C4F10

355-25-9

Perfluoropentane

C5F12

678-26-2

Perfluorohexane

C6F14

355-42-0

Perfluorocyclobutane

c-C4F8

115-25-3

PFC preparations or HFC preparations

Variable

+++++ TIFF +++++

PART 3

Company contact information

Company name:

Date of Submission:

Company address:

Transaction year (Year to which this report applies):

Postal code:

Country:

Contact person:

Phone No:

Fax No:

Email address:

I certify that I am the authorised representative for this company and have personally examined and am familiar with the information submitted in this and all attached documents. To the best of my knowledge, all information submitted is true, accurate, and complete.

Fluorinated greenhouse gas transaction(s)

Reporting is required for any entity that has produced, imported, and/or exported more than one metric tonne of fluorinated greenhouse gases, or preparations containing fluorinated greenhouse gases, per annum. Select the fluorinated greenhouse gas transaction type(s) conducted during this reporting period. For fluorinated greenhouse gas production and/or import, also indicate fluorinated greenhouse gas type(s) produced/imported.

Production

HFCs

PFCs

SF6

Import

HFCs/HFC preparations

PFCs/PFC preparations

SF6

Export

Based on the fluorinated greenhouse gas types and transactions types indicated above, complete all relevant reporting forms attached.

+++++ TIFF +++++

PART 4

Reporting HFC production and import data

Five forms are available for reporting HFC production and import data, as described below. Determine which forms apply to your company and complete as appropriate.

Producer and Importer Form 1: HFCs

This form should be used to report on the production and/or import of HFCs, including those used to produce preparations. Constituents of HFC preparations that were produced or imported as a substance and blended or imported as a preparation and re-blended should also be reported on this form. Only the most common HFCs are included on this form. Note:

If your company imported or purchased preparations that you did not re-blend, report those substances on Form 3.

If your company imported or produced HFCs or HFC preparations that are not listed on this form, proceed to Form 2.

Co-Producer Form 1 (only for producers)

Use this form to itemise co-producer transactions of the common HFCs. Ensure that the totals are the same as those reported on Producer and Importer Form 1.

Producer and Importer Form 2: Other HFCs

This form should be used to report on other HFCs not listed on Form 1. Constituents of HFC preparations produced or imported as a substance and blended or imported as a preparation and re-blended by your company should also be reported on this form. Note:

If your company imported or purchased preparations that you did not re-blend, report those substances on Form 3.

Co-Producer Form 2 (only for producers)

Use this form to itemize co-producer transactions of other HFCs not listed on Co-Producer Form 1. Ensure that the totals are the same as those reported on Producer and Importer Form 2.

Importer Form 3: HFC preparations (only for importers)

This form should be used to report on imports of HFC preparations that your company did not re-blend. Note:

If your company imported HFCs for use in preparations, report those substances on Form 1 and/or Form 2.

If your company imported HFC preparations and re-blended them, report those substances on Form 1 and/or Form 2.

+++++ TIFF +++++

Producer and Importer Form 1: HFCs

Complete the table as appropriate to account for all transactions (in metric tonnes) of HFCs for this reporting period. Producers of HFC preparations should use this form to report on each preparation constituent. (Refer to the introductory information of Part 4 for more complete instructions.) For HFCs not listed in this table, proceed to Form 2. Quantities imported or exported should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Importers that also purchase from Community producers or distributors, or stockpile quantities purchased from Community producers or distributors, are not responsible for reporting those amounts. If the intended application is ‘Other’ or ‘Unknown’, provide further explanation in the space below this table. Refer to Part 2 for definitions of terms.

Transactions/(metric tonnes)

HFC-32

HFC-125

HFC-134a

HFC-143a

HFC-152a

HFC-227ea

HFC-245fa

HFC-365mfc

HFC-43-10mee

Total new production from your facility/ies

Amount imported into the Community

Amount exported for sale outside the Community

Other amounts collected for reclamation or destruction from within the Community

Transactions for producers only

Purchases from Community co-producers

Sales to Community co-producers

Amount purchased from other Community sources

Stockpiles held during reporting year (a)

Stocks held at 1 January

Stocks held at 31 December

Reclamation, destruction, and feedstock use

Amount reclaimed by your company

Amount destroyed by your company (on-site)

Amount destroyed on your behalf (off-site within the Community)

amount used as a feedstock by your company

Net amount available for sale in the Community

Calculated total

(A+B-C+D+E-F+G+H-I-K-L-M)

Intended applications of amounts placed on Community market for the first time (best estimates) (b)

Refrigeration and air-conditioning

Fire protection

Aerosols

Solvents

Foams

Feedstock

Other or unknown (c)

Total amount placed on the Community market (b)

(O+P+Q+R+S+T+U)

Total sold (C+F+N)

(a) Importers should only report on imported quantities held in stocks, i.e. not on stockpiled quantities originally obtained from Community producers or distributors (best estimates where appropriate). Producers should report all stockpiled quantities regardless of source.

(b) Total amount placed on the Community market does not include any quantities previously held by Community importers and/or distributors. Therefore, for importers, row V should equal row N; for producers, row V should equal row N minus any quantities sold on the Community market that were previously purchased from Community importers/distributors in this reporting year or in previous years.

+++++ TIFF +++++

Description of ‘Other’ and/or explanation of ‘Unknown’ Intended Application(s). Specify fluorinated greenhouse gas type, if intended application of more than one fluorinated greenhouse gas is marked as ‘Other’ or ‘Unknown’.

Co-producer Form 1: HFCs

Complete the table to account for all co-producer transactions (in metric tonnes) of HFCs for this reporting period. For HFCs purchased or sold as constituents of preparations, report on each HFC component of the preparation separately. Refer to the introductory information of Part 4 for more complete instructions, and to Part 2 for definitions of terms.

Company name/(metric tonnes)

HFC-32

HFC-125

HFC-134a

HFC-143a

HFC-152a

HFC-227ea

HFC-245fa

HFC-365mfc

HFC-43-10mee

Purchases from Community co-producers

Total

Sales to Community co-producers

Total

+++++ TIFF +++++

Producer and Importer Form 2: Other HFCs

Complete the table as appropriate to account for all transactions (in metric tonnes) of HFCs for this reporting period. Producers of preparations should use this form to report on each preparation constituent. Quantities imported or exported should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Importers that also purchase from Community producers or distributors, or stockpile quantities purchased from Community producers or distributors, are not responsible for reporting those amounts. If the intended application is ‘Other’ or ’Unknown’, provide further explanation in the space below this table. This table should not be used to report emissions of HFC-23 from the manufacture of HCFC-22. Refer to the introductory information of Part 4 for more complete instructions, and to Part 2 for definitions of terms.

Transactions/(metric tonnes)

HFC-23 (a)

HFC-41

HFC-134

HFC-143

HFC-236cb

HFC-236ea

HFC-236fa

HFC-245ca

Other HFCs

(Specify)

Name

Total new production from your facility/ies

Amount imported into the Community

Amount exported for sale outside the Community

Other amounts collected for reclamation or destruction from within the Community

Transactions for producers only

Purchases from Community co-producers

Sales to Community co-producers

Amount purchased from other Community sources

Stockpiles held during reporting year (b)

Stocks held at 1 January

Stocks held at 31 December

Reclamation, destruction, and feedstock use

Amount reclaimed by your company

Amount destroyed by your company (on-site)

Amount destroyed on your behalf (off-site within the Community)

Amount used as a feedstock by your company

+++++ TIFF +++++

Net amount available for sale in the Community

Calculated total

(A+B-C+D+E-F+G+H-I-K-L-M)

Intended applications of amounts placed on Community market for the first time (best estimates) (c)

Refrigeration and air-conditioning

Fire protection

Aerosols

Solvents

Foams

Feedstock

Other or unknown (d)

Total amount placed on the Community market (c)

(O+P+Q+R+S+T+U)

Total sold (C+F+N)

(a) This form should not be used to report emissions of HFC-23 from the manufacture of HCFC-22.

(b) Importers should only report on imported quantities held in stocks, i.e., not on stockpiled quantities originally obtained from Community producers or distributors (best estimates where appropriate). Producers should report all stockpiled quantities regardless of source.

(c) Total amount placed on the Community market does not include any quantities previously held by Community importers and/or distributors. Therefore, for importers, row V should equal row N; for producers, row V should equal row N minus any quantities sold on the Community market that were previously purchased from Community importers/distributors in this reporting year or in previous years.

(d) Identify other application(s) in the space below. If intended application is unknown, explain why.

+++++ TIFF +++++

Co-Producer Form 2: Other HFCs

Company Name/(metric tonnes)

HFC-23 (*)

HFC-41

HFC-134

HFC-143

HFC-236cb

HFC-236ea

HFC-236fa

HFC-245ca

Other HFCs

(Specify)

Name

Purchases from Community co-producers

Total

Sales to Community co-producers

Total

+++++ TIFF +++++

Importer Form 3: HFC preparations*

* Not including preparations re-blended by your company

Complete the table as appropriate to account for all transactions (in metric tonnes) of HFC preparations for this reporting period. Do not use this form to report on preparations that you produced or re-blended. If the types of HFC preparations imported by your company are not listed in the table below, use the blank columns to identify and report on additional preparation types (and be sure to indicate composition). For preparations that also contain PFCs, report quantities on either the PFC Producer and Importer form or this form; do not duplicate information. Quantities imported or exported should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Importers that also purchase from Community producers or distributors are not responsible for reporting those quantities. Refer to the introductory information of Part 4 for more complete instructions, and to Part 2 for definitions of terms.

Transactions/(metric tonnes)

R-404a

R-407c

R-410a

R-507

Other HFC preparations

(specify name and composition) (a)

Name

Amount imported into the Community

Amount exported for sale outside the Community

Other amounts collected for reclamation or destruction from within the Community

Stockpiles held during reporting year (b)

Stocks held at 1 January

Stocks held at 31 December

Reclamation, destruction, and feedstock use

Amount reclaimed by your company

Amount destroyed by your company (on-site)

Amount destroyed on your behalf (off-site within the Community)

Amount used as a feedstock by your company

Net amount available for sale in the Community

Calculated Total (A-B+C+D+E-E-F-G-H)

Intended applications of amounts placed on Community market for the first time (best estimates)

Refrigeration and air-conditioning

Fire protection

Aerosols

Solvents

Foams

Feedstock

Other or unknown (c)

Total amount placed on the Community market (d)

(K+L+M+N+O+P+Q)

Total Sold (B+J)

(a) Indicate the preparation composition for each HFC preparation added to the table in the space below this table. For preparations that also contain PFCs, report quantities on either the PFC Producer and Importer form or this form; do not duplicate information.

(d) Total in row R should equal total in row J.

Preparation composition for each HFC preparation added to the table (e.g., R-404a: 44 % HFC-125, 4 % HFC-134a, 52 % HFC-143a).

+++++ TIFF +++++

PART 5

Producer and Importer Form: SF6

Complete the table as appropriate to account for all transactions (in metric tonnes) of SF6 for this reporting period. Quantities imported or exported should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Importers that also purchase from Community producers or distributors, or stockpile quantities purchased from Community producers or distributors, are not responsible for reporting those amounts. If the intended application is ‘Other’ or ‘Unknown’, provide further explanation in the space below this table. Refer to Part 2 for definitions of terms.

Transactions/(metric tonnes)

Sulphur Hexafluoride

(SF6)

Total new production from your facility/ies

Amount imported into the Community

Amount exported for sale outside the Community

Other amounts collected for reclamation or destruction from within the Community

Transactions for producers only

Purchases from Community co-producers

Sales to Community co-producers

Amount purchased from other Community sources

Stockpiles held during reporting year (a)

Stocks held at 1 January

Stocks held at 31 December

Reclamation and destruction

Amount reclaimed by your company

Amount destroyed by your company (on-site)

Amount destroyed on your behalf (off-site within the Community)

Net amount available for sale in the Community

Calculated total

(A+B–C+D+E–F+G+H-I-K-L)

Intended applications of amounts placed on Community market for the first time (best estimates) (b)

Electrical equipment

Magnesium die casting operations

Semiconductor manufacture

Other or unknown (c)

Total amount placed on the Community market (b)

(N+O+P+Q)

Total Sold (C+F+M)

(a) Importers should only report on imported quantities held in stocks, i.e., not on stockpiled quantities originally obtained from Community producers or distributors (best estimates where appropriate). Producers should report all stockpiled quantities regardless of source.

(b) Total amount placed on the Community market does not include any quantities previously held by Community importers and/or distributors. Therefore, for importers, row R should equal row M; for producers, row R should equal row M minus any quantities sold on the Community market that were previously purchased from Community importers/distributors in this reporting year or in previous years.

Description of ‘Other’ and/or explanation of ‘Unknown’ intended application(s).

+++++ TIFF +++++

Co-Producer Form: SF6

Complete the table to account for all co-producer transactions (in metric tonnes) of SF6 for this reporting period. Refer to Part 2 for definitions of terms.

Company name/(metric tonnes)

Sulphur hexafluoride

(SF6)

Purchases from Community co-producers

Total

Sales to Community co-producers

Total

+++++ TIFF +++++

PART 6

Producer and Importer Form: PFCs

Complete the table to account for all transactions (in metric tonnes) of PFCs for this reporting period. If the types of PFCs/PFC preparations produced/imported by your company are not listed in the table below, use the blank columns to identify and report on additional types (and be sure to indicate composition of preparations). For PFC preparations that your company produced, report on each PFC constituent individually. Report by preparation type only if you imported the preparation and did not re-preparation it. For preparations that also contain HFCs, report quantities on either the HFC Producer and Importer form or this form; do not duplicate information. Quantities imported or exported should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Importers that also purchase from Community producers or distributors, or stockpile quantities purchased from Community producers or distributors, are not responsible for reporting those amounts. If the intended application is ‘Other’ or ‘Unknown’, provide further explanation in the space below this table.

Transactions/(metric tonnes)

Perfluoromethane

(CF4)

Perfluoroethane

(C2F6)

Perfluoropropane

(C3F8)

Perfluorobutane

(C4F10)

Perfluoropentane

(C5F12)

Perfluorohexane

(C6F14)

Perfluorocyclobutane

(c–C4F8)

Other PFC/PFC preparations (a)

(specify name and composition) (b)

Name

Total new production from your facility/ies

Amount imported into the Community

Amount exported for sale outside the Community

Other amounts collected for reclamation or destruction from within the Community

Transactions for producers only

Purchases from Community co-producers

Sales to Community co-producers

Amount purchased from other Community Sources

Stockpiles held during reporting year (c)

Stocks held at 1 January

Stocks held at 31 December

Reclamation and destruction

Amount reclaimed by your company

Amount destroyed by your company (on-site)

Amount destroyed by your company (off-site within the Community)

Net amount available for sale in the Community

Calculated total (A+B-C+D+E-F+G+H-I-K-L)

+++++ TIFF +++++

Intended applications of amounts placed on Community market for the first time (best estimates) (d)

Solvents

Semiconductor manufacture

Other or unknown (e)

Total amount placed on the Community market (d) (N+O+P)

Total sold (C+F+M)

(a) Only report on preparation types if your company did not create or re-blend the preparation; for preparations that were produced, report on each PFC constituent.

(b) If reporting on PFC preparations, indicate the preparation composition for each preparation added to the table in the space below. For preparations that also contain HFCs, report quantities on either the HFC Producer and Importer form or this form.

(c) Importers should only report on imported quantities held in stocks, i.e., not on stockpiled quantities originally obtained from Community producers or distributors (best estimates where appropriate). Producers should report all stockpiled quantities regardless of source.

(d) Total amount placed on the Community market does not include any quantities previously held by Community importers and/or distributors. Therefore, for importers, row Q should equal row M; for producers, row Q should equal row M minus any quantities sold on the Community market that were previously purchased from Community importers/distributors in this reporting year or in previous years.

(e) Identify other application(s) in the space below this table. If intended application is unknown, explain why.

Producer and Importer Form: PFCs (Continued)

Preparation composition for each PFC preparation added to the table (e.g., R-508a: 61 % Perfluoroethane, 39 % HFC-23).

+++++ TIFF +++++

Co-Producer Form: PFCs

Complete the table to account for all co-producer transactions (in metric tonnes) of PFCs for this reporting period. For PFCs purchased or sold as constituents of preparations, report on each PFC component of the preparation separately. Refer to Part 2 for definitions of terms.

Company Name/(metric tonnes)

Perfluoromethane

(CF4)

Perfluoroethane

(C2F6)

Perfluoropropane

(C3F8)

Perfluorobutane

(C4F10)

Perfluoropentane

(C5F12)

Perfluorohexane

(C6F14)

Perfluorocyclobutane

(c–C4F8)

Other PFCs (Specify)

Name

Purchases from Community co-producers

Total

Sales to Community co-producers

Total

+++++ TIFF +++++

PART 7

Exporter Form (all fluorinated greenhouse gas types)

Complete sections 1 and 2 to account for all quantities of fluorinated greenhouse gases exported outside of the Community during the calendar year for which this form is being submitted. Use the blank rows to report on fluorinated greenhouse gases not listed, including any preparations. For preparations that contain both HFC and PFC components, report quantities as HFC preparations or PFC preparations; do not duplicate information. Quantities should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Refer to Part 2 for definitions of terms.

Section 1. Export totals (metric tonnes)

Section 2. Total amount exported for recycling, reclamation and/or destruction (metric tonnes)

Fluorinated greenhouse gas type

Annual total exported from the European Community

Recycling

Reclamation

Destruction

SF6

HFCs

HFC-23

HFC-32

HFC-41

HFC-43-10mee

HFC-125

HFC-134

HFC-134a

HFC-152a

HFC-143

HFC-143a

HFC-227ea

HFC-236cb

HFC-236ea

HFC-236fa

HFC-245ca

HFC-245fa

HFC-365mfc

Other:

HFC preparations*

R-404a

R-407c

R-410a

R-507

Other:

PFCs/PFC preparations

Perfluoromethane

Perfluoroethane

Perfluoropropane

Perfluorobutane

Perfluoropentane

Perfluorohexane

Perfluorocyclobutane

Other:

(*) Indicate the preparation composition for each preparation added to the table in the space below.

Indicate the preparation composition for each preparation added to the table (e.g., R-404a: 44 % HFC-125, 4 % HFC-134a, 52 % HFC-143a). If you indicated the components of these preparations on a previous form (i.e., HFC Producer and Importer), you do not need to restate them here.

+++++ TIFF +++++

--------------------------------------------------

Miscellaneous information

Relationship between documents

Text

32007R1493

Title and reference

Text

Dates

Classifications