Choose the experimental features you want to try

This document is an excerpt from the EUR-Lex website

Document 32014L0005

    Commission Delegated Directive 2014/5/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders on printed circuit boards, termination coatings of electrical and electronic components and coatings of printed circuit boards, solders for connecting wires and cables, solders connecting transducers and sensors that are used durably at a temperature below – 20 °C under normal operating and storage conditions Text with EEA relevance

    OJ L 4, 09/01/2014, p. 53–54 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

    Legal status of the document In force

    ELI: http://data.europa.eu/eli/dir_del/2014/5/oj

    9.1.2014   

    EN

    Official Journal of the European Union

    L 4/53


    COMMISSION DELEGATED DIRECTIVE 2014/5/EU

    of 18 October 2013

    amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders on printed circuit boards, termination coatings of electrical and electronic components and coatings of printed circuit boards, solders for connecting wires and cables, solders connecting transducers and sensors that are used durably at a temperature below – 20 °C under normal operating and storage conditions

    (Text with EEA relevance)

    THE EUROPEAN COMMISSION,

    Having regard to the Treaty on the Functioning of the European Union,

    Having regard to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (1), and in particular Article 5(1)(a) thereof,

    Whereas:

    (1)

    Directive 2011/65/EU prohibits the use of lead in electrical and electronic equipment placed on the market.

    (2)

    The substitution or elimination of lead in solders on printed circuit boards, termination coatings of electrical and electronic components and coatings of printed circuit boards, solders for connecting wires and cables, solders connecting transducers and sensors that are used durably at a temperature below – 20 °C under normal operating and storage conditions is currently not possible.

    (3)

    Directive 2011/65/EU should therefore be amended accordingly,

    HAS ADOPTED THIS DIRECTIVE:

    Article 1

    Annex IV to Directive 2011/65/EU is amended as set out in the Annex to this Directive.

    Article 2

    1.   Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by the last day of the sixth month after entry into force at the latest. They shall forthwith communicate to the Commission the text of those provisions.

    When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.

    2.   Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.

    Article 3

    This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

    Article 4

    This Directive is addressed to the Member States.

    Done at Brussels, 18 October 2013.

    For the Commission

    The President

    José Manuel BARROSO


    (1)   OJ L 174, 1.7.2011, p. 88.


    ANNEX

    In Annex IV to Directive 2011/65/EU the following point 26 is added:

    ‘26.

    Lead in

    solders on printed circuit boards,

    termination coatings of electrical and electronic components and coatings of printed circuit boards,

    solders for connecting wires and cables,

    solders connecting transducers and sensors,

    that are used durably at a temperature below – 20 °C under normal operating and storage conditions.

    Expires on 30 June 2021.’


    Top